Section 7. Slide Blocks

Transcription

1 Contents Section Series Series High Cycle Series 104 Side Flange 1.5 Series Series High Cycle Series 105 Slide Profiles 106 Side Flange Profiles 106 UHMW Slide Bar Profiles 107 UHMW Slide Strip Profiles 107 Slide Blocks 99 Parker Hannifin Corporation

2 Standard 2.52" Add an optional locking handle (pg 107) to any slide block, to provide a mechanism to lock the slide block in place anywhere on the extrusion. 4.09" 3.78" 1.97" 1.93" 3.78" blocks and moveable rails. They utilize glide pads oriented within t-slots & & Screws Use any 5/16 BHCS or SHCS TYP 3.78" Slide Block Long Each 0.68 lb Slide Block Long Each 1.37 lb Slide Block 3-3 Long Each 0.84 lb Slide Block 3-6 Long Each 1.68 lb " 4.69" TYP 100 Parker Hannifin Corporation

3 Side Flange 1.97" 0.38" 1.5 blocks and moveable rails. They utilize glide pads oriented within t-slots & Screws Use any 5/16 BHCS or SHCS Slide Block Side Flange A Long Each 0.68 lb Slide Block Side Flange A Long Each 1.37 lb Slide Block Side Flange B Long Each 0.82 lb TYP 0.37" Slide Blocks 3.50" 0.47" 4.50" Parker Hannifin Corporation

4 High Cycle Appropriate Slide Profile #10-32 x 1/2" BHCS [ ] Cut-away view of the assembly and parts for a high cycle slide. Parts show are included when you order a slide block assembly, but can be ordered separately to make your own custom high cycle side block assembly. #10-32 High Cycle Nut [ ] Slide Pad High Cycle 1.5" 2.52" 4.09" 3.78" 1.97" 1.93" HC 3.78" 1.5 blocks where rapid acceleration and deceleration takes place HC & HC HC & HC Screws Use any 5/16 BHCS or SHCS HC TYP 3.78" Slide Block High Cycle Long Each 0.68 lb HC Slide Block High Cycle Long Each 1.37 lb HC Slide Block High Cycle 3-3 Long Each 0.84 lb HC Slide Block High Cycle 3-6 Long Each 1.68 lb HC 4.69" 4.69" HC HC TYP 102 Parker Hannifin Corporation

5 High Cycle Inserts High Cycle Side Flange 1.97" 1.5 blocks where rapid acceleration and deceleration takes place. 0.38" HC & HC Screws Use any 5/16 BHCS or SHCS HC HC Side Flange A High Cycle Long Each 0.68 lb HC Side Flange A High Cycle Long Each 1.37 lb HC Side Flange B High Cycle Long Each 0.82 lb HC TYP 0.37" 1.5 These clamp accessories provide positioning and adjustment for 1.5" Series slide units. Handles provide a mechanism to lock the slide block in place anywhere on the extrusion. Slide extrusions and pads can be drilled to accept clamp accessories HC Slide Blocks Description Width Depth Part # Ratcheting L-Handle Wing Nut Star Handle " 0.47" 4.50" HC 103 Parker Hannifin Corporation

6 1" Series Standard 2.00" 1.83" 2.93" 2.50" 3.15" 0.06" 0.06" 1.56" 1.56" 1.11" 1.11" " 3.15" 4.25" 1 blocks and moveable rails. They utilize glide pads oriented within t-slots. 4.00" 2.50" 3.15" 1.00" TYP Slide Block 1-2 Long Each 0.30 lb Slide Block 1-4 Long Each 0.56 lb Slide Block 2-2 Long Each 0.51 lb Slide Block 2-4 Long Each 0.93 lb " 4.00" 3.50" 4.25" 3.50" 4.25" 1.00" " TYP 104 Parker Hannifin Corporation

7 1" Series Side Flange 0.06" 1.03" 1.95" 1.68" 2.13" 1.00" 2.13" 0.375" 2.00" blocks and moveable rails. They utilize glide pads oriented within t-slots. 1.00" TYP Slide Block Side Flange A 1-2 Long Each 0.30 lb Slide Block Side Flange A 1-4 Long Each 0.56 lb Slide Block Side Flange B 1-4 Long Each 0.58 lb " 4.00" 0.375" Slide Blocks 0.56" 2.13" 1.00" 4.00" Parker Hannifin Corporation

8 Slide Block Profiles Slide Block Profiles 2.52" 2.01" Profile 1.97" " 4.09" 3.58" Blocks Stationary 1.97" " Profiles for making custom slide blocks using slide pads. * For standard slide blocks see pages 104 and 108; for side flange (SF) slide blocks see pages 105 and 109. Aluminium, Clear Anodized " 2.01" 1" Series 1.83" 1.44" 1.56" Slide Profile 40 Cut off max. 240" (20') 2.33 lb/ft Slide Profile 80 Cut off max. 240" (20') 2.82 lb/ft Slide Profile 40 SF Cut off max. 240" (20') 2.23 lb/ft Slide Profile 28 Cut off max. 240" (20') 1.84 lb/ft Slide Profile 56 Cut off max. 240" (20') 3.06 lb/ft Slide Profile 28 SF Cut off max. 240" (20') 1.80 lb/ft * Saw cut necessary for cut to length " 2.93" 2.54" Custom slide blocks can be made using UHMW slide pads. Consult factory for part number information. 1.56" 4.25" Block " 0.20" 1.44" 1.95" Profile Stationary " 106 Parker Hannifin Corporation

9 Slide Block Profiles UHMW Slide Bar Slide bar " 0.19" Service Slide bar and use appropriate screws and t-nuts. UHMW Slide strip on a parallel application. UHMW Slide bar between two profiles 1.56" " Durable, low-friction material, selflubricating and easily machined. Provides a smooth gliding surface on a wide range of applications, from linear systems to adjustable work surfaces. UHMW, White 0.62" " UHMW Slide Bar 40 x 40 Cut off max. 120" (10') 1.04 lb/ft UHMW Slide Bar 40 x 10 Cut off max. 120" (10') 0.31 lb/ft UHMW Slide Strip 1.5" Cut off max. 120" (10') 0.13 lb/ft UHMW Slide Strip 1" Cut off max. 120" (10') 0.06 lb/ft * Saw cut necessary for cut to length " 1.56" 0.32" 0.39" " Slide Blocks 1.26" " Series 0.20" 0.25" 0.34" 0.81" Parker Hannifin Corporation

10 Notes 108 Parker Hannifin Corporation