McNally Sayaji Engineering Limited Bangalore Model 10/8 FAH AR 150/510 VASA HD
|
|
- Joseph Nelson
- 5 years ago
- Views:
Transcription
1 S. No. S. No. Description As per specification Technical Particulars Technical Particulars Technical Particulars GENERAL Ash Slurry Pump Ash Slurry Pump Ash Slurry Pump Make Warman SAM TURBO INDUSTRY PRIVATE LIMITED McNally Sayaji Engineering Limited Bangalore Model 10/8 FAH AR 150/510 VASA HD Pump Type Horizontal Centrifugal, Double Casing, Horizontal Centrifugal, Double casing Ash Slurry Horizontal centrifugal twin casing ash close non clog, Ash Slurry Pump. pump slurry Pump Horizontal Centrifugal Quantity 12 Nos. (4 pumps in one series). 12 Nos. 12 Nos. 12 Nos Application Ash Slurry Disposal Ash Slurry Disposal Ash Slurry Disposal Specific Gravity Temperature 60 Deg C 60 Deg C 60 Deg C 60 Deg C Rated capacity MWC MWC MWC MWC Total dynamic Head at specified rated capacity 41 m 41 MWC Efficiency at duty point with ash slurry Minimum 70 % 73% 72% 72% with water Minimum 70 % 73% 72% 73% Rated Capacity, Head and Efficiency at ( )45% of rated speed of pump 630 m3/hr, 12.8 m, 77.5%, 375 RPM 630 M 3 /HR,11 M,60% Capacity: 346.5, Head: 12.4 (with ash slurry) Rated Capacity, Head and Efficiency at (+)10% of rated speed of pump 630 m3/hr, 50.2 m, 69.2%, 745 RPM 630 M 3 /HR,50.5 M,66% Capacity: 693, Head: 49.6 (with ash slurry) Pump speed at rated parameter (rpm) Maximum 1000 rpm at minimum speed of pump at ( )45%. 400 ( 45% of the Rated RPM is 375, However as the pump curve is plotted from 400 RPM, the Minimum speed is considered as 400 RPM. The pump can work satisfactorily at 375 RPM also) at maximum speed of pump at (+)10% Shut off Head MWC 45 m Pump input power (BKW) at duty point With ash slurry With water Pump input power (BKW) at ( ) 45% of rated speed with ash slurry pumping KW, KW at (+) 10% of rated speed with ash slurry pumping KW, KW Range of operation of pump 50% to 120% of rated flow 40 % to 120% of rated flow Suction condition Flooded Suction with suction lift of 2m Flooded FLOODED Flooded Size of suction flange, mm ID 254 mm Size of discharge flange, mm ID 203 mm Impeller Size (dia. mm) & Type 686, closed 545 MM / CLOSED NON CLOG Number of vanes 5 FIVE Maximum Size of solids pump can handle min.40 mm size ash clinkers. 83 mm
2 S. No. S. No. Description As per specification Technical Particulars Technical Particulars Technical Particulars GENERAL Ash Slurry Pump Ash Slurry Pump Ash Slurry Pump First stage 5.5 kg/cm2 Gland Seal water Requirement Second stage 10.3 kg/cm2 Clear water, 3.0 m 3 /hr & Delivery Quality: Clear Water, Quantity: 40 LPM, (Quality, Quantity and pressure). Third stage 15 kg/cm2 Pessure+1 kg/cm 2 Pressure: 5.3 Kg/cm2 Fourth stage 20 kg/cm Weight of bare pump, Kgs 3000 Apprx 1850 KGS 4000 (Approx) GD 2 value of the pump NM Vibration Limit VDI 2056/BS 4675 standards. 7.6 mm/sec RMS 50 MICRONS Maximum rms value value of the vibration velocity 4.5 mm/s Noise Level 85 dba at 1 mtr from equipment. 85 dba at 1m distance 85 Dba at a distance of 1 meter Maximum 85 db (At a distance of 1 Mtr from pump & motor) Hydrostatic test pressure and duration Hydro test of Casing shall be done at 2 times the rated head or 1.5 times the shut off pressure of the last pump of the series whichever is higher. As per mutually agreed QAP KG/CM 2 & 30 MINS Pump Bearing Type anti friction type bearings Tappered roller Cup & Cone Type 1.5 times the working Pressure for 10 Minutes Drive End: Spherical Roller, Non Drive End: Cylindrical Roller Pump Bearing Make SKF/FAG/TIMKEN Timken TIMKEN SKF/FAG Pump bearing lubrication oil lubricated Grease GREASE Grease Lubrication NPSH 3.3 m 5.0 / FLOODED 3.2 M Material of Construction Casing ( For Double casing Pumps) i) i) Outer Casing Cast Steel as per ASTM A216 Gr. WCB OR Ductile iron as per ASTM OR Spheroidal Graphite iron as per IS Ductile Iron ASTM A536 CAST STEEL to ASTM A 216 Gr. WCB Spheroidal Graphite Iron as Per IS 1865 ii) ii) Inner Casing/Volute Liner Impeller Chrome nickel cast iron (composition to Ni hard IV) of 550 BHN. Or 24% chromium cast iron of 550BHN Chrome nickel cast iron (composition to Nihard IV) of 550 BHN Or 24% chromium cast iron of 550 BHN. OR Hi Chrome (ASTM 532 Gr III A) with hardness of min. 600 BHN Replaceable Liners have been offered in Ultra Chrome (A05) a patented material of Weir Minerals with a hardness of BHN. Impeller has been offered in Ultra Chrome a patented material of Weir Minerals with a hardness of BHN. Chrome Nickel cast iron (Composition to Ni hard IV) of 550 BHN/ 24% Chromium cast iron of 550 BHN. Chrome Nickel cast iron (Composition to Ni hard IV) of 550 BHN/ 24% Chromium cast iron of 550 BHN. 24 % to 27% Hichrome ASTM 532 Gr III A BHN % to 27% Hichrome ASTM 532 Gr III A BHN Back Liner Chrome nickel cast iron (composition to Nihard IV) of 550 BHN Or 24% chromium cast iron of 550 BHN. OR Hi Chrome (ASTM 532 Gr III A) with hardness of min. 600 BHN Liner has been offered in Ultra Chrome a patented material of Weir Minerals with a hardness of BHN. Chrome Nickel cast iron (Composition to Ni hard IV) of 550 BHN/ 24% Chromium cast iron of 550 BHN. 24 % to 27% Hichrome ASTM 532 Gr III A BHN Shaft Carbon steel to AISI 1040 / EN 8 EN8 or END whichever is superior BS 970 EN 8 EN Shaft sleeve SS Stainless Steel or 420C stainless steel which ever is superior ASTM A 743 CA 15 ( BHN) SS Bearing bed CAST IRON TO : IS 210 FG 200 Bearing Housing Cast Iron Base frame IS 2062, Grade E250 IS 2062 M.S M.S Fabricated DRIVE SYSTEM DETAILS Recommended Motor rating, kw 200 KW 200 kw 200 kw 200 kw
3 S. No. S. No. Description As per specification Technical Particulars Technical Particulars Technical Particulars GENERAL Ash Slurry Pump Ash Slurry Pump Ash Slurry Pump Motor Speed, rpm (Syn.) 1500 rpm 1500 rpm 1500 rpm 1500 rpm PAINTING Surface Preparation TSGENCO painting requirements Grit blast and remove fine dust by compressed Two pack Epoxy / 100 microns / OXFORD air BLUE As per Approved QAP/Drawing/Data Sheet Type of Paint Will be provided during detailed engineering stage As per Approved QAP/Drawing/Data Sheet Total Paint DFT microns As per Approved QAP/Drawing/Data Sheet Final RAL color shade of outside surface RAL 5005 signal blue As per Approved QAP/Drawing/Data Sheet
4 S. No. Description As per specification Technical Particulars 1.00 General Gear box Gear box Gear box 1.00 Make/Manufacturer PREMIUM Premium Transmission Ltd PREMIUM/Equivalent 1.10 Model H1 180 H1 200 FC H Type of gear Box Helical Single Stage Reduction Gear Box Helical Helical Single reduction Helical 1.30 Motor rating (kw/rpm) 200KW/ 1500 rpm 200KW/1500 rpm(syn.) 200KW/1500 rpm(syn.) 200KW/1500 rpm(syn.) 1.40 Total Weight of Unit without Oil 300 (apprx) 300 KGS Quantity 3 (1W+2SB) Nos. 3 NOS 03 Nos. 03 Nos Nominal Output Ratio Gear ratio shall be (0.97 X 1480) divided by rpm 2.03:1 of pump at 110% of duty point 1.35:1 2.03: Actual Ratio 2.026:1 ON AWARD OF CONTRACT 2.026; Nominal Output Speed RPM Nominal Output Torque 5195 Nm 1310 RPM 5194Nm 1.10 Acceptable Vibration Limit Vibration level of Gear Box shall not exceed 75 microns or shall be accepted as per VDI 2056 / BS <2 mm/sec 2 m/s MM/SEC 1.11 Acceptable Noise Level Maximum noise level shall not exceed 85 db (A) when measured at 1.0 m away from noise 85db 85 db emission source. 85 dba from 1.5 m 1.12 Type of Cooling Air cooled FAN fan air and water 1.13 Type of Lubricant SPALSH oil SPLASH 1.14 Oil Type 320 GRADE tarxol G Quantity of Oil Required LTS Maximum rise in Oil Temperature maximum rise of oil temperature shall not be 110 more than ambient +45 deg. C. 40 DEG ABOVE AMBIENT OF 50 DEG Duty Continuous 24 hrs /day HEAVY DUTY CONTINOUS' HEAVY DUTY 1.18 Type of Loading Continuous designed for Heavy Shock Loading HEAVY SHOCK UNIFORM HEAVY SHOCK 1.19 Mechanical Service Factor Design Mechanical Rating in KW Based on 200KW motor rating KW AT 1500 RPM 402 KW 1.21 Design Thermal rating in KW 407 KW AT 1500 RPM AT 20 DEG CENT 394 KW /WITH FAN AND CC 2.00 Material of Construction 2.10 Casing Cast Iron FG 260 to IS:210 CI FG 260 CI Fg 260 CI FG Gear and pinion Case Hardened Alloy Steel (EN353, BS:970) 815 M17 815M17 (En 353) BS M Output Shaft EN 24, BS C8 N IS C 8N 45 C8 N 2.40 Input Shaft Case Hardened Alloy Steel (EN 19, BS 970) 815 M17 BS 970 En 19T 815 M Painting 3.01 Surface Preparation TSGENCO painting requirements WILL BE PROVIDE LATER AS PER APPROVED SPECN WILL BE PROVIDED LATER 3.02 Type of Paint RAL 5015 AS PER APPROVED SPECN RAL Total Paint DFT MICRON DFT AS PER APPROVED SPECN MICRON DFT 3.04 Final RAL color shade of outside surface BLUE AS PER APPROVED SPECN BLUE
5 1.01 General Variable Speed with manual scoop controlled actuator 1.02 Make/Manufacturer PREMIUM PREMIUM TRANSMISSION PREMIUM/Equivalent 1.03 Model No. 500 PST PST PST (Variable speed fluid coupling) 1.04 Maximum Power Transmission Capacity 275 RPM 272 KW AT 1500 RPM 275KW/1500 rpm 1.05 Motor rating (KW/RPM) 200 KW/1500 rpm 200KW/1500 rpm (syn.) 200KW/1500 rpm (syn.) 200KW/1500 rpm (syn.) 1.06 Total Weight of Unit without Oil 685 Kg 790 KGS 685 kg 1.07 Oil Capacity of Fluid Coupling 270 LTR 270 LITS 270 liters 1.08 Acceptable Vibration Limit Vibration level of fluid coupling shall not be exceed 75 microns or shall be accepted as per VDI 2056 / BS MM/SEC RMS 7.1mm/sec(RMS) 1.09 Acceptable Noise Level 1.10 Type of Cooling Maximum noise level shall not exceed 85 db (A) when measured at 1.0 m away from 85 dba from 1.5 M 85 dba noise emission source. Water operated oil cooler, Shell and Tube type Heat exchanger OIL THROUGH WATER OPERATED OIL COOLER 1.11 Type of Lubricant OIL hydrolic oil 1.12 Speed Regulating Range (+) 10% to ( ) 45 % `5:1' 1.13 Coupling Speed 1500 RPM 1485 RPM 1500 rpm through water operated shell & tube type heat exchanger Percentage of Slip Maximum Slip Permissible 3% At duty point REFER T/S CURVE 1.16 At ( )45% speed REFER T/S CURVE 1.17 At (+) 10 % speed 0.03 REFER T/S CURVE 1.18 Maximum Slip at any point REFER T/S CURVE 1.19 Moment of Inertia, GD2 of 1.20 Of Primary parts(input side) KG M kgm^2
6 1.21 Of Secondary parts (Output side) KG M kgm^ Of oil in circuit (Circuit full) 7.2 LATER 7.2 kgm^ Total GD2 of rotating assembly with circuit full of oil LATER kgm^ Windage Losses 2 KW 0.02 BHARAT PETROLEUM MAK 46 HINDUSTAN 1.25 Oil Specification 46 INDIAN OIL SERVO SYSTEM 46 PETROLEUM ENKLO 46 INDIAN OIL SERVO SYETEM Length and specification of connecting hose pipe (oil 1 1/2" BSPx3 meter len. 2 ON AWARD OF CONTRACT service). no's 2.00 Oil Cooler 2.01 Type Water operated oil cooler, water operated shell & tube Shell and Tube type Heat SHEEL AND TUBE TYPE type exchanger 2.02 Oil Flow designed 125 LPM 2.03 I/L & O/L Oil Temperature 75 DEG C./65 DEG C Water Flow required 5.5 m3/hr 8.6 m^3/hr I/L & O/L Water Temperature 35 & Deg C./42 Deg C Inlet Water Pressure The operating pressure of clarified water of fluid coupling cooler shall be 6.0 Kg/cm2(g). The oil cooler 3 kg/cm2 3 kg cm^2 shall be tested to withstand min. 10 Kg/cm2 (g) water pressure during inspection Water Pressure Drop 0.5 kg/cm2 0.5 kg cm^ Working Design pressure for Shell Side(Oil) ON AWARD OF CONTRACT 10 kg cm^ Test pressure for Shell Side ON AWARD OF CONTRACT 15 kg cm^ Working Design pressure for Tube Side(Water) ON AWARD OF CONTRACT 7.5 kg cm^ Test pressure for Tube Side. ON AWARD OF CONTRACT 12 kg cm^ Diameter and thickness of Tube ON AWARD OF CONTRACT 9.5 DIA x 22 SWG 2.13 Number of Tubes ON AWARD OF CONTRACT AS REQUIRED
7 2.14 Material of Construction ON AWARD OF CONTRACT 2.15 Shell ERW Pipe ON AWARD OF CONTRACT ERW PIPE 2.16 Tubes Copper ON AWARD OF CONTRACT COPPER 3.00 Oil Circulation Pump Gear Pump with relief valve/ As per proven standard of manufacturer Make PTL APPROVED Rotodel 3.02 Capacity 125 lpm 125 LPM 3.03 Head 3 kg/cm2 1 mtr Motor Rating 3 hp 1500 rpm 3 HP,4P 3.05 Motor Specifications TEFC SQ CAGE MOTOIR REFER DATA SHEET 3.06 Material of Construction 3.07 Impeller LM4/LM6 LM6(M)/LM25(M) BS: Back casing LM4/LM Runner LM4/LM Scoop Casing LM4/LM Shaft EN 8 IS:1875 CL IV 3.12 Coupling Box and Cover IS 2062 IS:2062,Gr E250,Q A 3.13 Fusible Plug ON AWARD OF CONTRACT IS:2062,Gr E250,Q A+SOLDER 3.14 Scoop housing ON AWARD OF CONTRACT IS:210, FG Scoop housing bracket ON AWARD OF CONTRACT 4.00 Pressure Gauge weather and dust proof as per IP65 REFER DATA SHEET 4.01 Model No. ON AWARD OF CONTRACT 4.02 Make H GURU/EQUIV 4.03 Type BOURDON 4.04 Range KG/CM Enclosure Class/Protection ON AWARD OF CONTRACT 4.06 Over range protection ON AWARD OF CONTRACT 4.07 Size of Dial gauge ON AWARD OF CONTRACT 4.08 Colour and lettering ON AWARD OF CONTRACT 4.09 Scale ON AWARD OF CONTRACT 4.10 Safety Feature ON AWARD OF CONTRACT 4.11 Adjustment ON AWARD OF CONTRACT
8 4.12 Material Specification ON AWARD OF CONTRACT 4.13 Sensing element material ON AWARD OF CONTRACT 4.14 Movement material ON AWARD OF CONTRACT 4.15 Case material ON AWARD OF CONTRACT 5.00 Pressure Switch weather and dust proof as per IP Model No Make INDFOSS 5.03 Type ON AWARD OF CONTRACT 5.04 Range 0.1 TO 1 KG/CM Enclosure Class/Protection ON AWARD OF CONTRACT 5.06 Over range Protection ON AWARD OF CONTRACT 5.07 Set point adjustment ON AWARD OF CONTRACT 5.08 Switch Configuration ON AWARD OF CONTRACT 5.09 Switch Rating ON AWARD OF CONTRACT 5.10 Switch type ON AWARD OF CONTRACT 5.11 Repeatability ON AWARD OF CONTRACT 5.12 Maximum operating temperature ON AWARD OF CONTRACT 5.13 Material Specification ON AWARD OF CONTRACT 5.14 Sensing element material ON AWARD OF CONTRACT 5.15 Case material ON AWARD OF CONTRACT 6.00 Temperature gauge weather and dust proof as per IP Model No Make H GURU/EQUIV 6.03 Type 6.04 Range DEG CENT 6.05 Enclosure Class/Protection ON AWARD OF CONTRACT 6.06 Over range protection ON AWARD OF CONTRACT 6.07 Size of Dial gauge ON AWARD OF CONTRACT 6.08 Colour and lettering ON AWARD OF CONTRACT 6.09 Scale ON AWARD OF CONTRACT 6.10 Safety Feature ON AWARD OF CONTRACT 6.11 Adjustment ON AWARD OF CONTRACT 6.12 Material Specification ON AWARD OF CONTRACT REFER DATA SHEET REFER DATA SHEET
9 6.13 Sensing element material ON AWARD OF CONTRACT 6.14 Movement material ON AWARD OF CONTRACT 6.15 Case material ON AWARD OF CONTRACT 7.00 Temperature Switch weather and dust proof as per IP65 REFER DATA SHEET 7.01 Model No Make INDFOSS 7.03 Type 7.04 Range DEG CENT 7.05 Enclosure Class/Protection ON AWARD OF CONTRACT 7.06 Over range Protection ON AWARD OF CONTRACT 7.07 Set point adjustment ON AWARD OF CONTRACT 7.08 Switch Configuration ON AWARD OF CONTRACT 7.09 Switch Rating ON AWARD OF CONTRACT 7.10 Switch type ON AWARD OF CONTRACT 7.11 Repeatability ON AWARD OF CONTRACT 7.12 Maximum operating temperature ON AWARD OF CONTRACT 7.13 Material Specification ON AWARD OF CONTRACT 7.14 Sensing element material ON AWARD OF CONTRACT 7.15 Case material ON AWARD OF CONTRACT 8.00 Ball Valve (for oil isolation) ON AWARD OF CONTRACT 8.01 Type ON AWARD OF CONTRACT BALL VALVE 8.02 Make ON AWARD OF CONTRACT PETL STD 8.03 Size ON AWARD OF CONTRACT 40 NB 8.04 Material Specification ON AWARD OF CONTRACT BALL SS 8.05 Body material ON AWARD OF CONTRACT CAST IRON 9.00 Y Strainer ON AWARD OF CONTRACT 9.01 Type ON AWARD OF CONTRACT `Y' TYPE 9.02 Make ON AWARD OF CONTRACT PETL STD Size ON AWARD OF CONTRACT 40 NB 9.04 Material Specification ON AWARD OF CONTRACT 9.05 Body material ON AWARD OF CONTRACT CAST IRON 9.06 Mesh material ON AWARD OF CONTRACT SS PAINTING: TSGENCO painting requirements AS PER APPROVED SPECN
10 10.01 Please indicate type of paint used / total paint DFT / Final RAL color shade of outside surface. AS PER APPROVED SPECN As per approved quality plan
TECHNICAL ENQUIRY SPECIFICATION OF
BIHAR STATE ELECTRICITY BOARD 2X250 MW THERMAL POWER PROJECT, BARAUNI CUSTOMER S CONSULTANT: STEAG ENERGY SERVICES (INDIA) PVT. LTD., NOIDA TECHNICAL ENQUIRY SPECIFICATION OF VARIABLE SPEED SCOOP CONTROLLED
More informationCasing. Impeller. Gland. Shaft. Bearing Bracket. Support Foot RANGE APPLICATIONS
Casing Impeller Gland Shaft Bearing Bracket Support Foot RANGE APPLICATIONS Delivery size : up to 150 mm Capacity Head 3 : up to 550 m /hr : up to 100 metres Circulation of water in industries, Air-conditioning
More information4500C Series Vortex Pumps
Section 009 Page 003 4500C Series Vortex Pumps Table of Contents 4500C Performance 2" x 2" - 4523C, Multiple Speed... 004 3" x 3" - 4523C, Multiple Speed... 004 4" x 4" - 4522C, Multiple Speed... 005 4"
More informationGIS/ GISO Series End Suction Pumps TECHNICAL BULLETIN
GIS/ GISO Series End Suction Pumps TECHNICAL BULLETIN Goulds Water Technology is renowned for manufacturing the highest quality pumping equipment utilizing the best engineering practices available worldwide.
More informationEBARA Submersible Propeller Pumps Contents Project: Model: Chk d: Date: Model
Contents Model A0553 C1125 V0494 A0713 C1285 V0554 A0843 C1455 V0754 A03 C15 V0854 C1915 V0974 C2185 V1154 C2905 Section Page Specifications 3-3 Model Designation 3-6 Impeller Data 3-8 Material Specifications
More informationTechnical data 50 & 60 Hz. Vertical centrifugal pumps Series: DPLHS
Technical data 50 & 60 Hz Vertical centrifugal pumps Series: DPLHS 2 Table of Contents 1 Pump introduction 1.1 General... 4 1.2 Model key... 4 1.3 Description of the product... 4 1.4 Operation... 5 1.5
More informationKG(X)3. Grinder Pumps. 3HP High Flow Grinder Pump (Class 1, Div. 1, Groups C & D Hazardous Location) Performance Curve. Total Head (FT) Capacity (GPM)
Grinder Pumps 3HP High Flow Grinder Pump (Class 1, Div. 1, Groups C & D Hazardous Location) The KEEN PUMP series centrifugal grinder pumps easily handle residential, commercial or industrial sanitary waste,
More informationSUBMERSIBLE SEWAGE PUMPS TYPE : NS
SUBMERSIBLE SEWAGE PUMPS TYPE : NS SUBMERSIBLE SEWAGE PUMPS TYPE - NS Range : Delivery size upto300 mm Capacity up to 1800 m³/hr (Max.) Head up to 90 m (Max.) Max. permissible solid size up to 300 mm Applications
More informationSelection Chart Project: Model: Chk d: Date: C C V V V A CAPACITY
Selection Chart Project: Model: Chk d: Date: 45 (Ft) (m) 15.0 HZ (Synchronous Speed - 1800 RPM) 35 C2905-7 25.0 8.0 C1125-17 C15-1170 C2185-885 7.0 TOTAL HEAD 15 6.0 5.0 C1455-1170 V0494-1170 V0554-1170
More informationVOLUME -III TECHNICAL SPECIFICATION FOR MISCELLANEOUS PUMPS (HORIZONTAL)
1 X 500 MW FEROZE GANDHI UNCHAHAR THERMAL POWER PROJECT STAGE-IV VOLUME -III TECHNICAL SPECIFICATION FOR MISCELLANEOUS PUMPS (HORIZONTAL) Specification No. : PE-TS-401-100-N001 (REV. 0) BHARAT HEAVY ELECTRICALS
More informationSUGGESTED SPECIFICATIONS
PART 1 - GENERAL 1.01 SCOPE A. Pumps to be supplied under this specification shall be of a severe duty, recessed cupped impeller design suitable for use in (SLUDGE, GRIT, ETC. APPLICATIONS) with a 20 year
More informationBearings. Shaft seal. Materials
Type series booklet 1385.51/3--10 RDL Axially split volute casing pumps Applications Waterworks, irrigation and drainage pumping stations, power stations, industrial water supply systems, fire fighting
More informationVolute Casing Centrifugal Pumps PN 16 for heat-transfer liquids Heat-transfer oil up to 350 C Hot water up to183 C
Volute Casing Centrifugal Pumps PN 16 for heat-transfer liquids Heat-transfer oil up to 350 C Hot water up to183 C Series CMIT in inline design Series CMAT with axial inlet ATEX 0 a Series CMAT Series
More informationHigh Temperature Chemical Process Inline Pumps
Bulletin C-1.2.21. Dean Pump Division High Temperature Chemical Process Inline Pumps Series DL Series DL High Temperature Chemical Process Inline Pumps Capacities to 6 GPM (182 m 3 /hr) Heads to feet (167
More informationElite. KSB Australia Pty Ltd. Centrifugal Pump
Type Series Booklet Elite Centrifugal Pump Application The Ajax Elite centrifugal pump is suitable for handling water and similar liquids mainly used in the following applications. -Water Supply -Air conditioning
More informationKGX2-21. Grinder Pumps. 2HP Dual Seal Grinder Pump, External Start (Class 1, Div. 1, Groups C & D Hazardous Location) Performance Curve
Grinder Pumps Your Premier Pump Choice KGX2-21 2HP Dual Seal Grinder Pump, External Start (Class 1, Div. 1, Groups C & D Hazardous Location) The KEEN PUMP KGX2-21 series centrifugal grinder pumps easily
More informationAerofoil Ventilation Fans. Fantek. Quality & Performance at Affordable Prices
Aerofoil Ventilation Fans Quality & Performance at Affordable Prices GENERAL FEATURES, located in Chennai strives to deliver quality products at affordable costs to all its customers. Our company s vision
More informationDSZ3. EBARA Submersible Propeller Pumps Contents Project: Model: Chk d: Date: Model
Contents Model A0553 C1125 V0494 A0713 C1285 V0554 A0843 C1455 V0754 A1003 C1605 V0854 C1915 V0974 C2185 V1154 C2905 Section Page Specifications 3-203 Model Designation 3-206 Impeller Data 3-208 Material
More informationHORIZONTAL SPLIT CASING PUMPS TYPE : UP / UPL / UPH
HORIZONTAL SPLIT CASING PUMPS TYPE : UP / UPL / UPH HORIZONTAL AXIALLY SPLIT CASING PUMPS Range : Delivery size upto 1220 mm Capacity up to 24,000 m³/hr Head up to 180 meters Applications : Suitable for
More informationGoulds GIS Series. ISO Frame & Stub Shaft Pumps. Goulds Pumps
Goulds GIS Series ISO Frame & Stub Shaft Pumps Goulds Pumps ISO End Suction Centrifugal Pump - Technical Sales Data The ITT Goulds brand is renowned for manufacturing the highest quality pumping equipment
More informationGoulds GIS Series. ISO Frame & Stub Shaft Pumps. Goulds Pumps
Goulds GIS Series ISO Frame & Stub Shaft Pumps Goulds Pumps ISO End Suction Centrifugal Pump - Technical Sales Data The ITT Goulds brand is renowned for manufacturing the highest quality pumping equipment
More information3800 Series. Single Stage End Suction Pumps. Capacities to 4200 G.P.M. (954 m 3 /hr) Heads to 520 Feet (180 Meters) Temperatures to 300 F (149 C)
3800 Series Single Stage End Suction Pumps Capacities to 200 G.P.M. (95 m 3 /hr) Heads to 520 Feet (180 Meters) Temperatures to 300 F (19 C) MODEL 380 Aurora 3800 Pump Setting New Standards of Efficiency
More informationMinerals. WARMAN Centrifugal Slurry Pumps WBH Pump
Minerals WARMAN Centrifugal Slurry Pumps WBH Pump New design and manufacturing techniques result in improvements in performance all with the Warman slurry pump quality that you expect Technology with a
More informationAluminium Frame Motors Improved Efficiency EFF2
Motors Energy Automation Coatings Aluminium Frame Motors Improved Efficiency EFF2 Standard Features: Three-phase, multivoltage, IP55, TEFC : 0.12 up to 11kW Frames: 63 up to 132M Voltage: 220-240/380-415V
More informationRS Multi-Stage, Ring Section Pumps
RS Multi-Stage, Ring Section Pumps Technical Specification Pages This page left intentionally blank. 1.0 Overview. The RS Series is Carver s multi-stage pump for fluids at moderate to high pressures. The
More informationBoosterpaQ Hydro MPC-ED Guide Specification
BoosterpaQ Hydro MPC-ED Guide Specification Part I GENERAL 1.1 WORK INCLUDED A. Variable Speed Packaged Pumping System 1.2 REFERENCE STANDARDS The work in this section is subject to the requirements of
More information855 Filtrate Pump, Close Coupled and Overhead Mounted Pumps
855 Filtrate Pump, Close Coupled and Overhead Mounted Pumps Technical Specification Pages This page left intentionally blank. 1.0 Overview. The 855 Series is Carver s offering specifically designed to
More information50H Z VERSION. WindJet Air Knife Packages. Deliver superior blowing and drying performance in a complete, customizable package.
5H Z VERSION Experts in Spray Technology Spray Nozzles Spray Control Spray Analysis Spray Fabrication WindJet Air Knife Packages Deliver superior blowing and drying performance in a complete, customizable
More informationUltra Heavy Duty Slurry Pump Ultra Heavy Duty Slurry Pump
Ultra Heavy Duty Slurry Pump Ultra Heavy Duty Slurry Pump THE TOTAL SLURRY SOLUTION Product Range The True Ultra Heavy Duty Slurry Pump Warman Ultra Heavy Duty Horizontal Slurry Pumps Designed for the
More informationPWM API 610 BB3 Multistage Pump
PWM API 610 BB Multistage Pump PWM API 610 BB MULTISTAGE PUMP HYDRAULIC PERFORMANCE COVERAGE 60 Hz Performance Coverage FLOW (m /h) Visit our web site at www.pumpworks610.com and specify flow and performance
More informationBOSS Series D Control Valve
Applications Process control systems for food, pulp and paper, chemical, petrochemical & other industries HVAC systems Feed water and fuel system controls in boiler rooms Packaged systems (OEM) such as
More informationAxially split volute casing pumps. Applications. Bearings. Shaft seal. Operating data
Type series booklet 1385.52/3--10 RDLV Axially split volute casing pumps Applications Waterworks, irrigation and drainage pumping stations, power stations, industrial water supply systems, fire fighting
More informationBasic Hydraulic Features. Basic Mechanical Features
APRIL 2006 1.0 Overview The ETA is designed for flow rates that fall beyond the range of most end suction pumps. Performance extends to 9,500 GPM, 440 feet of head, and 88% efficiency. This range is covered
More informationHeavy Duty Slurry Pumps Type Ensival Moret EMW
Heavy Duty Slurry Pumps Type Ensival Moret EMW Heavy Duty Slurry Pumps Type Ensival Moret EMW The EMW pump range has been designed considering historic field experience, coupled with the latest in CFD
More informationEN. 850 Filtrate Pumps. Technical Specification Pages
850 17.01.EN 850 Filtrate Pumps Technical Specification Pages 850 Series Filtrate Pump 850 17.01.EN This page left intentionally blank. 1.0 Overview. The 850 is Carver s filtrate pump line designed for
More informationPRODUCT INFORMATION YEOMANS SERIES 6150 COMPLETE 6150 PUMP INCLUDES: B C D. HORIZONTAL PUMP WITH FEET B. COUPLING E. COMMON BASE C.
YEOMANS SERIES 6150 HORIZONTAL-COUPLED PRODUCT INFORMATION PUMP MODELS 4310-1C A B C D E COMPLETE 6150 PUMP INCLUDES: A. MOTOR D. HORIZONTAL PUMP WITH FEET B. COUPLING E. COMMON BASE C. COUPLING GUARD
More informationG2C and G2S Series Vertical Cantilever and Sump Pumps
G2C and G2S Series s Technical Specification Pages This page left intentionally blank. 1.0 Overview. Carver s vertical pump line is designed for moderate to high flow rates. It includes a cantilevered
More informationMixed Flow Roof Fans (RMH)
Mixed Flow Roof Fans (RMH) Motors protected to IP44 Motor insulation Class B Maximum operating temperature 4 C Standard Thermal Overload Protection IP65 service isolator Bird guard included as standard
More informationUNIVERSAL PRODUCT LINE: STEEL EXTERNALS JACKETED PUMPS TABLE OF CONTENTS SERIES DESCRIPTION RELATED PRODUCTS OPERATING RANGE
SERIES 223A, 4223A, 323A, 4323A Page 1302.1 Issue B TABLE OF CONTENTS Features & Benefits...2 Jacketing...2 Relief Valve Configurations...3 Porting & Sealing...3 Revolvable Pump Casings...3 Cutaway View
More informationPROVEN PERFORMANCE RELIABILITY EASY INSTALLATION
SERIES COOLING TOWER SINGLE-CELL UP TO 1750HRT COOLING CAPACITY EX-S High Performance Crossflow ow Type PROVEN PERFORMANCE RELIABILITY EASY INSTALLATION EX-S SERIES COOLING TOWER SINGLE-CELL UP TO 1750HRT
More informationData sheet. Page: 1 / 5. ETL GGSAV11D BKSBIE3 Inline pump. Operating data. Design
Data sheet Page: 1 / 5 Operating data Requested flow rate Operating data determined for maximum inlet pressure Requested developed head 15.00 m Pumped medium Ambient air temperature 20.0 C Fluid temperature
More informationVERTICAL MULTISTAGE PUMP SETS
VERTICAL MULTISTAGE PUMP SETS Not all pumps are born equal. Vada pumps are tough. Powerful. Hardworking. They re serious pumps for serious jobs. If water needs to be moved efficiently and effectively -
More informationVIKING SG SERIES SEALLESS MAG DRIVE PUMPS
SERIES SG-04, -05, -07, -0, -4 (Cast Iron) Section 34.3 Page 34.3. OPERATING RANGE: SG Pumps (Cast Iron Mag Drive) and SGN (Ductile Iron Mag Drive) Displacements No. 23 SG and 7 SGN 0.06 to 90 (SG) and
More information3312 Model. pumping Model Model AURORA Series HORIZONTAL AND VERTICAL CLOSE-COUPLED PUMPS
3312 Model pumping 3314 Model 3311 Model AURORA 3310 Series HORIZONTAL AND VERTICAL CLOSE-COUPLED PUMPS WWW.AURORAPUMP.COM AURORA 3310 Series Horizontal and Vertical Close-Coupled Pumps Capacities to 3800
More informationISO 2858 Back Pullout End Suction Centrifugal Pumps
ISO 2858 Back Pullout End Suction Centrifugal Pumps Back Pullout End Suction Centrifugal Pumps Applications: Irrigation Water transfer Building Services Pressure Boosting Mining HVAC Features: Designed
More informationGHE-Series Single Screw Extruder Units
GHE-Series Single Screw Extruder Units Contents General Description 1 Design Feature.. 2 Selection Procedure 3 Thrust Bearing Data 4 Thrust Bearing Life. 5 Mechanical Capacity 9 Output Torque and Exact
More informationPROCESS PUMPS MODEL V200 ANSI B73.2
EAGLE PROCESS PUMPS V200 ANSI B73.2 POWER END Shaft Diameters Bearings Stuffing Box PUMP END Maximum Diameter Solids Minimum Casing Thickness Casing Corrosion Allowance Working Pressure Test Pressure
More informationMYERS 3MW VERTICAL DISCHARGE WASTEWATER PUMPS. Sewage, high-capacity sump, effluent
The Myers heavy-duty series pumps are designed for residential raw sewage and light commercial applications. The non-clogging two-vane impeller delivers high-efficiency pumping and easily handles trashy
More informationQUANTUM PARALLEL SHAFT FAN DRIVE by Amarillo Gear Company
QUANTUM PARALLEL SHAFT FAN DRIVE by Amarillo Gear Company The patented Quantum Parallel Shaft Fan Drive for dry cooling systems reflects a long history of quality workmanship and reliability. Amarillo
More informationBEV. Deep well vertical pumps. 3. Design. 1. Fields of Application. 4. Designation. 2. Operating Data
Type series booklet CTI-2000/00 [09-2010] BEV Deep well vertical pumps 1. Fields of Application BEV are vertical multistage centrifugal pumps designed for deep well, ditches and tanks to pump clean liquids
More informationMULTISTAGE PUMPS TYPE RKB
MULTISTAGE PUMPS TYPE RKB MULTISTAGE PUMPS-TYPE : RKB Description Range : Delivery size upto 250mm Capacity up to 850 m³/hr Head up to 850 m Applications : Sprinkler irrigation, Fire Fighting, Water supply
More informationNi-HARD SUBMERSIBLE PUMP
Instruction, Installation, Operation and Maintenance Manual Ni-HARD SUBMERSIBLE PUMP 2018 mbh pumps (gujarat) pvt. ltd. ISO 9001 Certified Company A Mark of Quality CROSS SECTION DRAWING NO. DESCRIPTION
More informationMixed Flow Roof Fans (RMH)
Mixed Flow Roof Fans (RMH) Features and Benefits Motors protected to IP44 Motor insulation Class B Maximum operating temperature 4 C Standard Thermal Overload Protection IP65 P65 service isolator Guard
More informationContents. Identification
Contents Identification Type key Product data Introduction Applications Features and benefits Performance range pole pole Construction Sectional drawing Construction features Test pressure Operating conditions
More informationGoulds Severe Duty Slurry Pump
Goulds 5500 Severe Duty Slurry Pump 5500 Proven leadership in mining and mineral processing Proven Leadership 100 years of slurry pumping experience. Many industry firsts including: hard metal slurry pump,
More informationUNIVERSAL PRODUCT LINE: STEEL EXTERNALS JACKETED PUMPS TABLE OF CONTENTS SERIES DESCRIPTION RELATED PRODUCTS OPERATING RANGE
SERIES 4223, 4323 (API 682 Seal) Section 304 Page 304. TABLE OF CONTENTS Features & Benefits...2 Revolvable Pump Casings...2 Materials of Construction...2 Cutaway View & Pump Features...3 Key...4 Specifications...4
More informationUNIVERSAL PRODUCT LINE: DUCTILE IRON JACKETED PUMPS TABLE OF CONTENTS SERIES DESCRIPTION RELATED PRODUCTS OPERATING RANGE
Page 1602.1 TABLE OF CONTENTS Features & Benefits...2 Porting & Sealing...2 Jacketing...2 Revolvable Pump Casings...2 Cutaway View & Pump Features...3 Model Number Key...4 Standard Materials of Construction...4
More informationITT. Goulds Pumps. G&L Series SSH S & M-Group 316 Stainless Steel End Suction Pumps. Engineered for life. Commercial Water.
ITT Goulds Pumps G&L Series SSH S & M-Group 316 Stainless Steel End Suction Pumps www.goulds.com Engineered for life A Full Range of Product Features Superior Materials of Construction: AISI Type 316L
More informationCM5-5 A-R-A-E-AVBE C-A-A-N
GRUNDFOS DATA BOOKLET CM5-5 A-R-A-E-AVBE C-A-A-N Grundfos pump 9686813 Thank you for your interest in our products. Please contact us for more information, or visit our website https://www.lenntech.com/grundfos/cmbasis/9686813/cm5-5-a-r-a-e-avbe.html
More informationTechnical Data DML. Submersible Sewage Pumps with Single Channel Impeller. DML_Techdata_SS_V11 EBARA PUMPS AUSTRALIA PTY. LTD.
Technical Data DML Submersible Sewage s with Single Channel Impeller AUSTRALIA PTY. LTD. DML_Techdata_SS_V Contents -SPECIFICATIONS FEATURES & APPLICATIONS TYPICAL EXPLODED VIEW SPECIFICATIONS SELECTION
More informationPWM. API 610 BB3 Multistage Pump
PWM API 610 BB3 Multistage Pump HYDRAULIC PERFORMANCE COVERAGE FLOW (m 3 /h) 60 Hz Performance Coverage Visit our web site at www.pumpworks610.com and specify flow and performance needs and obtain pump
More informationHigh Temperature Air-Cooled Hot Oil Pumps
Bulletin C 1.4.42 Dean Pump Division High Temperature Air-Cooled Hot Oil Pumps No Water Cooling Required RA3 RA2 DEAN PUMP SERIES RA FAN COOLED HIGH TEMPERATURE HOT OIL PUMPS No Liquid Cooling Required
More informationHORIZONTAL MULTI STAGE PUMPS
HORIZONTAL MULTI STAGE PUMPS APPLICATIONS Water supply Hot/cold water Sprinklers Agriculture Construction Factories Mines Boiler feed Other general high pressure services *Please choose the model, referring
More informationEFQT/EFQU. EBARA Self Priming Trash Pump. Contents Project: Model: Chk d: Date:
Contents Section Page Model Designation 2 Features 3 Standard Specifications 5 Specifications 6 Selection Chart 7 Suction Speed Flow Chart 9 Performance Curves 10 Dimension Drawings 20 Model Designation
More informationSECTION PIPING SPECIALTIES PART 1 GENERAL 1.1 SUMMARY
SECTION 230533 - PIPING SPECIALTIES PART 1 GENERAL 1.1 SUMMARY A. Section Includes: 1. Pressure gages. 2. Pressure gage taps. 3. Thermometers. 4. Thermometer supports. 5. Test plugs. 6. Static pressure
More informationFLSD (E) Atmospheres containing explosive GAS totally enclosed three-phase asynchronous motors General information
(E) Atmospheres containing explosive GAS General information Flameproof totally enclosed three-phase asynchronous motors, FLSD (E) series, according to IEC 60034, 60038, 60072, 60079-0 and 60079-1, EN
More informationCM5-5 A-R-A-E-AVBE F-A-A-N
GRUNDFOS DATA BOOKLET CM5-5 A-R-A-E-AVBE F-A-A-N Grundfos Pump 9686818 Thank you for your interest in our products Please contact us for more information, or visit our website https://www.lenntech.com/grundfos/cmbasis/9686818/cm5-5-a-r-a-e-avbe.html
More informationHattersley Newman Hender Ltd
Product Guide Quality Valves from Hattersley WHEN IT REALLY COUNTS, YOU CAN DEPEND ON HATTERSLEY Hattersley Newman Hender is one of the world s premier manufacturers of cast iron, ductile iron and copper
More informationCheck Valve MODEL. Schematic Diagram. Product Dimensions Data:
Check Valve Simple Proven Design No-Slam Operation Drip-Tight Shut-Off No Packing Glands or Stuffing Boxes Easy to Install & Maintain 8-0 (Full Internal Port) MODEL 68-0 (Reduced Internal Port) The Cla-Val
More informationEnd Suction Range MARCH 2018
End Suction Range MARCH 2018 INDEX QB Peripheral Vane Pump... 4 Performance Data... 5 CPM Single Stage Pumps... 6 2CPM Twin Stage Pump... 10 Performance Data... 11 JSWM Self-Priming Jet Pump... 12 Performance
More informationNC State University Design and Construction Guidelines Division 23 Hydronic Pumps
1.0 Purpose A. The following guidelines apply to the selection of pumps primarily for circulating water. It is the goal of NC State to purchase pumps that are selected to provide a long service life, minimal
More informationHigh Temperature Air-Cooled Hot Oil Pumps
Bulletin C 1.4.42 Dean Pump Division High Temperature Air-Cooled Hot Oil Pumps No Water Cooling Required RA296 RA3146 RA3186 RA296 The smaller, foot mounted economy version of the air-cooled RA series
More informationIndex - Section 14 End Suction Pump Semi-Open Impeller
Index - Section End Suction Pump Semi-Open Impeller ITEM S Product Numbering System...1 Typical Architects / Engineers Specifi cations - Series 4000...2 Seal Application...3-4 Technical Charts...5-6 Pump
More informationMA-40M(L)(H) TRIPLEX PLUNGER PUMP
MA-40M(L)(H) TRIPLEX PLUNGER No. of Plungers...3 Maximum Rated Speed...550 rpm Stroke Length...2.5 in. 63.5 mm Maximum Rated Power...40.0 hp 29.8 kw Maximum Rod Load...3456 lbs. 15.3 kn Weight MA-40M...750
More informationTECHNICAL HANDBOOK. Heavy Duty Slurry Pump EMW. Wilfley Sealing Technology. No Flush Water Required
TECHNICAL HANDBOOK Heavy Duty Slurry Pump EMW Wilfley Sealing Technology No Flush Water Required WILFLEY SEALING TECHNOLOGY Wilfley Sealing Technology is the premier sealing solution for the toughest pumping
More informationCM10-3 A-R-A-E-AVBE F-A-A-N
GRUNDFOS DATA BOOKLET CM1-3 A-R-A-E-AVBE F-A-A-N Grundfos Pump 9686946 Thank you for your interest in our products Please contact us for more information, or visit our website https://www.lenntech.com/grundfos/cmbasis/9686946/cm1-3-a-r-a-e-avbe.html
More informationDuctile Iron, Jacketed Pumps: Catalog Section 1602 Cast Iron, Non-Jacketed Pumps: Catalog Section 1401 HL4126A
Page 1601.1 TABLE OF CONTENTS Features & Benefits...2 Port Location Options...2 Model Number Key...3 Standard Materials of Construction...3 Cutaway View & Pump Features...4 Special Materials & Options
More informationModel 133 Models 134 & 135 AURORA 130 SERIES SINGLE STAGE TURBINE TYPE PUMPS
Model Models 4 & AURORA 0 SERIES SINGLE STAGE TURBINE TYPE PUMPS WWW.AURORAPUMP.COM AURORA 0 SERIES Single Stage Turbine Type Pumps Capacities to 0 G.P.M. Heads to 700 Ft. Temperatures to F A Pioneer in
More informationSeries Split Coupled Vertical In-Line Pumps. File no.: 43.10in Date: august 14, 2013 Supersedes: 43.10in Date:
Series 00 Split Coupled Vertical In-Line Pumps File no.:.0in Date: august, 0 Supersedes:.0in Date: february 0, 0 Series 00 Best commercial hvac pump design available since 99 Life cycle value at every
More informationSUBMERSIBLE SEWAGE AND EFFLUENT PUMPS
SUBMERSIBLE SEWAGE AND EFFLUENT PUMPS ISO 9001:2008 Certified Company A Mark of Quality SUBMERSIBLE SEWAGE AND EFFLUENT PUMPS NON-CLOG SUBMERSIBLE SEWAGE PUMPS : MBH non-clog submersible sewage pumps offer
More information- CONSTRUCTIONS 300 SECTIONAL VIEW 300 MECHANICAL SEAL DIMENSIONS AND WEIGHT 400 PUMP 400 PACKING 401
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY AND CURVE SPECIFICATIONS 202 PERFORMANCE CURVE 70 203 PERFORMANCE CURVE 120 204 PERFORMANCE CURVE 200 205 - CONSTRUCTIONS 300 SECTIONAL VIEW
More informationPWA ANSI / ASME B73.1 PROCESS PUMP
PWA ANSI / ASME B73.1 PROCESS PUMP COMPETITIVE ADVANTAGES Carbon Steel vs. Ductile Iron n High strength, impact resistant Carbon Steel liquid ends for improved durability and pressure containment at no
More informationSpiral Scraper Clarifier
Spiral Scraper Clarifier Key features & benefits Special design developed for faster sludge removal Best performance on 1:12 floor slope How we create value Low maintenance requirements Trouble-free installation
More informationTurbo Exhausters and Blowers
Turbo Exhausters and Blowers Clyde Process Sturtevant Turbo Exhausters and Blowers for continuous duty X Type Turbo Exhausters and Blowers Turbine Type Air Exhausters and Blowers Designed and engineered
More informationHORIZONTAL SPLIT CASING PUMP
HORIZONTAL SPLIT CASING PUMP HORIZONTAL PUMP CONSTRUCTION MBH Horizontal Split Casing Pumps - a new concept for better performance and higher efficiencies. For greater interchangeability and ease of maintenance,
More informationGeneral Purpose Three Phase Motors TEFC (IP55) High Efficiency. Standard Features
TM WEG W21 Severe Duty motors meet the most demanding severe duty application requirements. These TEFC motors are all cast iron construction, with enclosures rated IP55 to handle wet and dirty environments.
More information390 Series Multi-Stage Vertical In-Line Centrifugal Pumps
Bulletin 390 /Rev. B 390 Series Multi-Stage Vertical In-Line Centrifugal Pumps Capacities to 400 G.P.M. (91 M 3 /HR) Heads to 800 Feet (243 Meters) Temperatures to 250 F (120 C) motralec 4 rue Lavoisier.
More informationGÝROL FLUID DRIVES GÝROL FLUID DRIVES SAVE ENERGY HOW GÝROL FLUID DRIVES WORK
GÝROL FLUID DRIVES Gýrol Fluid Drives are used to control speed and to absorb shock and torsional vibration. These extremely robust variable speed hydraulic drives provide a reliable, low maintenance,
More informationRSV Series In-Line Vertical Multi-Stage, Ring Section Pump September 2013
1.0 Overview. The RSV series is Carver s multi-stage pump for water with maximum working pressures below 440 PSI. For other clean liquids please contact Carver Pump Company or your local distributor. The
More informationBulletin C Dean Pump Division. Heavy Duty, High Temperature Process Pumps. R4140 Telescoping Guard. R4140 C-Face Motor Support
Bulletin C 1.4.43 Dean Pump Division Heavy Duty, High Temperature Process Pumps R4140 Telescoping Guard R4140 C-Face Motor Support Dean Pump Series R Centrifugal Process Pumps Capacities to 5000 GPM (1135
More informationODP SERIES PREMIUM INDUSTRIAL OPEN DRIP PROOF MOTORS C280M to C355LB Frame. Australian Version October 2013
ODP SERIES PREMIUM INDUSTRIAL OPEN DRIP PROOF MOTORS C280M to C355LB Frame Australian Version October 2013 ODP SERIES (OPEN DRIP PROOF) PREMIUM INDUSTRIAL OPEN DRIP PROOF MOTORS, C280M TO C355LB FRAME
More informationS,W and SpaceSaver S Centrifugal Pumps W Centrifugal Pumps SpaceSaver Centrifugal Pumps
S,W and SpaceSaver S Centrifugal Pumps W Centrifugal Pumps SpaceSaver Centrifugal Pumps S&W PUMPS Proven Performance S & W pumps have proven themselves in a broad range of industrial, processing and mining
More informationHopkinsons CONTENTS SCHEDULE OF SHELL BOILER MOUNTINGS. Hopkinsons. Safety Valves 5. Boiler Stop Valves 17. Feed Check Valves 18. Blowdown Valves 20
Hopkinsons SCHEDULE OF SHELL BOILER MOUNTINGS Quality assurance Weir Power & Industrial operates quality programmes to cover the full scope of their activities. Comprehensive quality systems have been
More informationSECTION Pressure & Temperature Control
16 Pressure & Temperature Control ARMSTRONG PRODUCT CATALOGUE 70 Pressure Reducing s Pressure Reducing s Armstrong pressure reducing valves (PRVs) and temperature regulators help you manage steam, air
More informationNB /193 A-F2-A-BAQE
GRUNDFOS DATA BOOKLET NB100-200/193 A-F2-A-BAQE Grundfos Pump 98305367 Thank you for your interest in our products Please contact us for more information, or visit our website https://www.lenntech.com/grundfos/nb000/98305367/nb-100-200-193-a-f2-a-e-baqe.html
More informationSeries E4F E5F
Three Phase Induction Motors With Rotors Wound for Hoists Series E4F 160-315 E5F 355-400 ASI NT 003.1 I N D E X Use 2 Electrical Tolerances 9 Mechanical Tolerances 9 General Characteristics 2 Technical
More informationHoist Brake Motor. Hoist Gearbox Reeving Wire Rope Construction
DR11 Monorail Hoist Hoist Brake Motor Hoist Gearbox Reeving Wire Rope Construction Rope Drum Trolley Brake Motor Trolley gearbox Trolley Trolley Wheels Load Block Hoist VFD Controls Trolley VFD Controls
More informationEJseries. Self-Priming Centrifugal Pumps
EJseries Self-Priming Centrifugal Pumps T w w w. e u r o f l o p u m ps. c o m EJseries - Coding System Eg. EJS -11 XX XX XX EJT - XXX XX-XXX XX XXXX XXXX Series EJS = Shaft (bare) pumps EJT = Large Flow
More informationBulletin BX-420C Bell & Gossett. VSC /VSCS Pumps Technical Bulletin. Bell & Gossett. Part of the. Equipment Selection Program
Bulletin BX-4C Bell & Gossett VSC /VSCS Pumps Technical Bulletin Part of the Bell & Gossett Equipment Selection Program VSC/VSCS Construction Materials STANDARD SEAL CONFIGURATION PART NAME STANDARD CONSTRUCTION
More informationTECHNICAL SCOPE OF SUPPLY
TABLE OF CONTENTS 1.0 GENERAL DATA 2.0 MAIN FRAME 3.0 MAIN SHAFT 4.0 ADJUSTMENT RING 5.0 HEAD 6.0 BOWL 7.0 CLAMP RING 8.0 ECCENTRIC 9.0 SOCKET 10.0 COUNTERSHAFT 11.0 CRUSHER HYDRAULIC SYSTEM AND SETTING
More information