ISO 2858 Back Pullout End Suction Centrifugal Pumps

Size: px
Start display at page:

Download "ISO 2858 Back Pullout End Suction Centrifugal Pumps"

Transcription

1 ISO 2858 Back Pullout End Suction Centrifugal Pumps

2 Back Pullout End Suction Centrifugal Pumps Applications: Irrigation Water transfer Building Services Pressure Boosting Mining HVAC Features: Designed to comply with ISO 2858 standard. Back Pull out design. No pipe work dismantling for seal/impeller changes Cast Iron body casing with Bronze impellers and stainless steel shaft as standard. Bare shaft and frame mounted for direct coupling to electric motors, engines or pulley drives. Direct coupled to 2 pole and 4 pole IEC motor configurations. Designed for vertical centre line discharge. Suitable for horizontal mounting Single or double Carbon ceramic mechanical seals. Balanced or unbalanced configuration. Bearing housings fitted heavy duty deep groove ball bearings. All bare shaft pumps are fitted with greased for life bearings. Table E flanges on suction and discharge. Operating Conditions Flows: Max 9M³/Hr Head: Max 16M Liquid Temperature: -15 C 85 C with standard seal and up to 14 C with special Mechanical seal. Maximum Working Pressure: 16 Bar Available on request:* Materials of construction options, see Material Specification. Wear rings back and/or front. Mechanical seal variants. Packed glands. External seal flushing. Sight glass for oil level. *May require special order, consult Franklin for details 2

3 Model Number Explanation ISO Sealing Option 1 = Standard (Carbon/Ceramic/Nitrile) 2 = Gland Packing Motor kw Rating 1 = 2.2kW 1 = 22kW 2 = 3.kW 11 = 3kW 3 = 4.kW 12 = 37kW 4 = 5.5kW 13 = 45kW 5 = 7.5kW 14 = 55kW 6 = 11kW 15 = 75kW 7 = 15kW 16 = 9kW 9 = 18.5kW 17 = 11kW 18 = 132kW = Bare Shaft Motor Voltage Rating 5Hz 6Hz 1 = 38V/3Ph/5Hz 5 = 22V/Ph/6Hz 2 = 38/415V/3Ph/5Hz 6 = 38V/3Ph/6Hz 3 = 38/66V/3Ph/5Hz 7 = 22/38V/3Ph/6Hz 4 = /66V/3Ph/5Hz 8 = 22/46V/3Ph/6Hz Motor Frequency/Speed (Pole) 1 = 5Hz, 2P 4 = 6Hz, 2P 2 = 5Hz, 4P 5 = 6Hz, 4P 3 = 5Hz, 6P 6 = 6Hz, 6P = Bare Shaft Material Codes & Options Code Impeller Casing Shaft 1 Cast Iron Cast Iron SS431 2 Bronze Cast Iron SS SS Cast Iron SS SS Cast Iron SS431 Discharge Port Diameter (mm) eg: 4 = 4mm 125 = 125mm Impeller Trim 1 = 16mm 4 = 315mm 2 = 2mm 5 = 4mm 3 = 25mm 6 = 5mm Product Line ISO 3

4 ISO 2858 Motor Pumps, 2 pole, 5 Hz Ordering Information Pump Type Suction mm Discharge mm Impeller Nominal mm Motor kw Motor frame Pump Build number Order number 5 x L ISO x M ISO x S ISO x S ISO x M ISO x M ISO x M ISO x S ISO x M ISO x M ISO x M ISO x M ISO x M ISO x M ISO x L ISO x M ISO x L ISO x M ISO x L ISO x L ISO x S/M ISO x S ISO x M ISO x M ISO x M ISO x M ISO x M ISO x L ISO x M ISO x M ISO x L ISO x L ISO x S/M ISO

5 ISO 2858 Motor Pumps, 2 pole, 5 Hz Ordering Information continued Pump Type Suction mm Discharge mm Impeller Nominal mm Motor kw Motor frame Pump Build number Order number 8 x L ISO x L ISO x S/M ISO x S ISO x M ISO x M ISO x M ISO x L ISO x L ISO x M ISO x L ISO x L ISO x L ISO x L ISO x S/M ISO x S ISO x M ISO x S ISO x M ISO x S ISO x M ISO x L ISO x L ISO x S/M ISO x S ISO x M ISO x S ISO x M ISO x S ISO x M ISO x S ISO x M ISO

6 ISO 2858 Bare Shaft Pumps Ordering Information Pump Type Suction mm Discharge mm Impeller Nominal mm Pump Build number Order number 5 x ISO x ISO x ISO x ISO x ISO x ISO x ISO x ISO x ISO x ISO x ISO x ISO x ISO x ISO x ISO x ISO x ISO x ISO x ISO x ISO x ISO x ISO x ISO x ISO x ISO x ISO x ISO x ISO

7 Material Specifications Standard construction Component Material Specification Casing Grey Cast Iron AS183 T22-T26 Impeller Bronze AS1565 C925 Seal Plate CMA1 AS1565 C9571 Bearing Housing Grey Cast Iron AS183 T22-T26 Shaft Martensitic Stainless Steel AS Impeller Nut Austenitic Stainless Steel AS274/H6B 316SS Impeller Key Duplex Stainless Steel ASTM 225 Fastners Zinc Plated Carbon Steel AS111/AS1112 Gr 8.8 Optional Material Specifications Component Material Specification Casing Casing Wear Ring Ductile Iron 316SS Duplex SS Leaded Bronze Phosphor Bronze Aluminium Bronze Martensitic Stainless Steel Austenitic Stainless Steel Bronze AS1831/4-12 AS274/H6B CD4MCu AS1565 C935 AS1565 C981 AS1565 C9581 ASTM A743 Gr CA-4 AS274 H6B AS1565 C9261 Impeller 316 Stainless Steel AS274/H6B Cast Iron AS183/T26 Shaft 316 Stainless Steel AS274/H6B 7

8 ISO 2858 Series Pump Performance Data Tombstone Curves Tombstone Curves USGPM rpm 145 rpm TOTAL HEAD IN METRES TOTAL HEAD IN METRES IGPM 5 l/sec m 3 /hr 1 USGPM 145 rpm (Nominal speed) IGPM 65x x4-25 5x32 1x x4 8x x x rpm (Nominal speed) 5 5x32-2 5x x x x x x5-25 8x x8-4 VOLUMETRIC FLOW RATE x4-2 65x x x x x x x5-25 8x5-2 8x x x x x x x65-2 1x x x x x x x x x x x x x TOTAL HEAD IN FEET TOTAL HEAD IN FEET 2 15 l/sec m 3 /hr VOLUMETRIC FLOW RATE

9 Performance Curve: 5 x mm 182mm % 4% 45% 5% KW 52% 54% 56% 57% 57% 56% 54% 52% 5% 45%.55KW KW PUMP SIZE & TYPE: 5 x RPM: mm 182mm 1 MILLIMETERS 6. 3% 4% 5% 55% 58% 6% 61% 62% % 62.5% 62% 4.KW 61% KW 3.KW PUMP SIZE & TYPE: 5 x RPM: 29 9

10 Performance Curve: 5 x mm 3% 4% 45% 48% 5%51% 52% 52.5% 52.5% 52% 51% 5% 1.1KW 228mm 1.55KW.75KW PUMP SIZE & TYPE: 5 x 32-2 RPM: mm 3% 4% 45% 5% 52% 228mm % 55% % 55.5% 55% KW 5.5KW 7.5KW PUMP SIZE & TYPE: 5 x 32-2 RPM: 296 1

11 Performance Curve: 65 x mm MILLIMETERS % 4% 5% 55% 6% 62% 63% 63% 62% 6% 55% 5% 4..37KW.75KW.55KW PUMP SIZE & TYPE: 65 x 5-16 RPM: mm DIA mm DIA % 6% 64% 67% 69% 7% 71% 7% 69% 67% 64% 5.5KW 6% 4KW 3KW PUMP SIZE & TYPE: 65 x 5-16 RPM: 29 11

12 Performance Curve: 65 x mm MILLIMETERS 228mm % 5% 55% 58% 6% 62% 63% 63% 62% 6% 58% 1.5KW 1.1KW 5..75KW PUMP SIZE & TYPE: 65 x 4-2 RPM: mm 228mm % 5% 55% 6% 62% 64% % 66% % % 64% 11KW KW 7.5KW PUMP SIZE & TYPE: 65 x 4-2 RPM:

13 Performance Curve: 65 x mm mm % 3% 45% 48% 5% 1.1KW 52% 53% 53.5% 53.5% 53% 52% 2.2KW KW PUMP SIZE & TYPE: 65 x 4-25 RPM: % 4% 45% 5% 52% 54% 55% 56% 56.5% 56.5% 56% KW 11KW 15KW 18.5KW mm DIA 278mm DIA PUMP SIZE & TYPE: 65 x 4-25 RPM:

14 Performance Curve: 65 x mm POWER 342mm % 3% 35% 4% 43% 45% 46% 47% MILLIMETERS 2.2KW 3.KW 47% 46% 45% 4.KW PUMP SIZE & TYPE: 65 x RPM: % 3% 35% 4% % 45% 46% 47% 48% 49% % 48% 47% KW 22KW 37KW 3KW mm DIA 278mm DIA PUMP SIZE & TYPE: 65 x RPM:

15 Performance Curve: 8 x mm DIA % 5% 6% 65% 7% 74% % 77% % KW 7% 65% 1.1KW KW PUMP SIZE & TYPE: 8 x RPM: mm DIA 182mm DIA % 78% 8% 8.5% 8.5% KW 8% 78% 11KW 65% 7.5KW 5.5KW PUMP SIZE & TYPE: 8 x RPM:

16 Performance Curve: 8 x mm DIA mm DIA % 5% 6% 64% 68% 7% 71% 71% 7% 68% 2.2KW 1.1KW 1.5KW PUMP SIZE & TYPE: 8 x 5-2 RPM: mm NPSHR 228mm % 5% 6% 65% 7% 1 72% 74% KW 75% 75% 74% 72% 18.5KW 15KW 3. 11KW PUMP SIZE & TYPE: 8 x 5-2 RPM:

17 Performance Curve: 8 x mm 222mm DIA 4% 5% 55% 6% 7% MILLIMETERS 63% 75% 78% 66% 8% 67% 81% 2.2KW 45KW 278mm DIA 278mm 67% 81% 66% 8% 63% 78% 6% 55% 11KW 9KW4KW 75KW 3KW 1 55KW PUMP SIZE & TYPE: 8 x 5-25 RPM: % 5% 55% 6% 63% 65% 68% 68.8% 68.8% 68% 67% 65% KW 22KW 3KW 37KW mm DIA 222mm DIA PUMP SIZE & TYPE: 8 x 5-25 RPM:

18 Performance Curve: 8 x mm % 4% 45% 5% 53% 55% 57% 58% 58% 57% 342mm KW 5.5KW 55% 7.5KW 4KW mm DIA 342mm DIA 1 58% 59% 6% PUMP SIZE & TYPE: 8 x RPM: % 4% 45% 5% 53% 56% KW 3KW 6% 59% 58% 55KW 45KW 37KW PUMP SIZE & TYPE: 8 x RPM:

19 Performance Curve: 1 x mm DIA % 5% 6% 65% 7% 74% % 77% % KW 7% 65% 1.1KW KW PUMP SIZE & TYPE: 1 x 8-16 RPM: mm DIA 182mm DIA % 78% 8% 8.5% 8.5% KW 8% 78% 11KW 65% 7.5KW 5.5KW PUMP SIZE & TYPE: 1 x 8-16 RPM:

20 Performance Curve: 1 x NPSHR 182mm 228mm % 6% 65% 1.5KW 7% 74% 79% 78% 74% 7% 65% 4KW 3KW KW PUMP SIZE & TYPE: 1 x 65-2 RPM: mm 228mm % 5% 6% 7% 75% 79% 8% % 79% 3KW 22KW 75% 3. 15KW 18.5KW PUMP SIZE & TYPE: 1 x 65-2 RPM: 293 2

21 Performance Curve: 1 x mm NPSHR 278mm % 5% 6% 65% 7% 73% 75% 76% 77% KW 77% 76% 4KW 75% 5.5KW 73% 7.5KW PUMP SIZE & TYPE: 1 x RPM: % 5% 6% 65% 7% NPSHR 222mm 278mm % 77% 78% 79% 79% 78% 77% KW 3KW 37KW 45KW 55KW PUMP SIZE & TYPE: 1 x RPM:

22 Performance Curve: 1 x % 5% 55% 6% 62% 64% % % 64% 62% 6% 2. 11KW 5.5KW 7.5KW PUMP SIZE & TYPE: 1 x RPM: mm 342mm NPSHR 1 4% 5% 55% 6% 63% % 67% 68% 68% 67% 66% KW 55KW 75KW PUMP SIZE & TYPE: 1 x RPM:

23 Performance Curve: 125 x NPSHR 228mm % 8% 82% 84% % 82% 8% 75% 5.5KW 5. 3KW 4KW PUMP SIZE & TYPE: 125 x 1-2 RPM: mm POWER 228mm 8. 6% 7% 75% % 82% 84% 85% % 84% 82% 8% 55KW 45KW 3. 22KW 37KW 3KW PUMP SIZE & TYPE: 125 x 1-2 RPM:

24 Performance Curve: 125 x m 278mm % 7% 75% 78% 8% 81% 8% 78% 75% 7% 6% KW 11KW 7.5KW PUMP SIZE & TYPE: 125 x 1-25 RPM: mm DIA 278mm DIA % 75% 78% 8% 81% 81% 8% 78% 11KW 9KW 75KW 4. 45KW 55KW PUMP SIZE & TYPE: 125 x 1-25 RPM:

25 Performance Curve: 125 x mm NPSHR 342mm % 73% 75% 77% 78% 78% 77% 75% 73% 18.5KW 2. 15KW 11KW PUMP SIZE & TYPE: 125 x RPM: % 6% 7% 75% 77% 78% 79% % 78% 77% KW 132KW 15KW 11KW mm 342mm PUMP SIZE & TYPE: 125 x RPM:

26 Performance Curve: 125 x % 5% 6% 65% 67% 68% 69% 7% 7% 69% 68% 67% 37KW 3KW 22KW PUMP SIZE & TYPE: 125 x 1-4 RPM:

27 Performance Curve: 15 x NPSHR 222mm 278mm % 6% 7% 75% 8% 82% 84% 85% 85% 84% 82% 8% 75% 7% 1. 15KW 18.5KW 5. 11KW PUMP SIZE & TYPE: 15 x RPM: NPSHR 222mm 7% 75% 8% 83% 85% 278mm 85% 132KW 11KW 83% 8% 15KW 1 5 9KW PUMP SIZE & TYPE: 15 x RPM:

28 Performance Curve: 15 x mm 5% 6% 7% 75% 8% 83% 342mm % 8% % 7% 3KW 22KW KW PUMP SIZE & TYPE: 15 x RPM: NPSHR 8% 83% 84% % 83% 8% 22KW 185KW 15KW 6. 11KW PUMP SIZE & TYPE: 15 x RPM:

29 Performance Curve: 15 x mm DIA % 6% 7% 75% 78% 79% % 78% 75% 7% 55KW 45KW 37KW PUMP SIZE & TYPE: 15 x RPM:

30 Performance Curve: 15 x % 57% 61.5% 63.5% 65% KW 37KW 45KW 55KW 63.5% 61.5% 57% 51% 41% 11KW 9KW 2. 75KW PUMP SIZE & TYPE: 15 x RPM:

31 Performance Curve: 125 x mm 438mm % 55% 57% 59% 6% 61% 62% 62% 61% 6% 59% KW KW 15KW PUMP SIZE & TYPE: 125 x 8-4 RPM: % 58% 425mm DIA % 4 66% % 185KW 15KW KW 11KW PUMP SIZE & TYPE: 125 x 8-4 SHD RPM:

32 Performance Curve: 2 x mm DIA % 7% 22KW 75% 8% 81% 81% 8% 75% 37KW 45KW 3KW PUMP SIZE & TYPE: 2 x RPM:

33 Performance Curve: 2 x NPSHR 5% 6% 7% 74% 45KW 78% 8% 82% 83% 438mm 83% 82% 8% 78% 9KW 75KW NPSH- R 3. 55KW Performance Curve: 25 x 25-4 PUMP SIZE & TYPE: 2 x 15-4 RPM: mm IMP % 81% 84% 86% 87% % 86% 84% 81% 132KW 11KW 9KW 75KW 55KW PUMP SIZE & TYPE: 25 x 25-4 RPM:

34 Frame Mount Dump Dimensions a 22.5 f DISCHARGE: AS2129 "E" l S2Ø x 2 m2 ctr's m1 h h1 SUCTION: AS2129 "E" dø KEY SIZE w S1Ø x 4 n3 ctr's n2 ctr's n1 b 34

35 Frame Mount Dump Dimensions Size Designation Pump Support Mounting Shaft Inlet Outlet Impeller a f hi h2 b m1 m2 n1 n2 n3 w S1 S2 d I M12 M M12 M M12 M M12 M M12 M M12 M M12 M M12 M M12 M M12 M M12 M M12 M M12 M M16 M M16 M M16 M M16 M M16 M M16 M M2 M M16 M M2 M M2 M M2 M M2 M M2 M M2 M M2 M Remarks: 1. Standard flange drilling to AS Table "E" 2. Other Drilling options are available on request 3. Dimension are in mm 35

36 Frame Mount Shaft Dimensions B A F H G Ø E Shaft Module Dimension 'E' Key Width 'H' Key Width 'F' Key Width 'G' Diameter Tolerance Diamension Tolerance Key Length 'A' Shaft Extension 'B'

37 ISO Bare Shaft Pump Parts Description Item Description 2 Bearing Cap (Rear) 3 Bearing Cap (Front) 4 Mechanical Seal 6 Fastener Set 7 Volute (Casing) 1 Impeller Key - Woodruff 11 Impeller Nut 12A O-Ring 13 Impeller 19 Shaft DC 1 Bearing Housing 39 Intermediate Cover Item Description 5 Impeller Washer 51A 51B Oil Seal - Front Oil Seal - Rear 52 Bearing - Ball 53 Support Foot 54 Shaft Key - Input Drive 45 Wear-ring Casing Front (Option) 46 Wear-ring Intermediate cover Rear (Option) 47 & 48 Wear-ring Impeller Front & Rear (Option) 64 Plugs - Casing Drain 64A Plugs - Casing Suct & Disch 37

38 Close Coupled Motor Pumps Dimensions G O M H F J K L P N Q B R A S E C D 38

39 ISO Close Coupled Motor Pump Dimensions (4 Pole) Pump Model Shaft Module kw Motor Frame Dimensions Weight A B C D E F G H J K L M N O P Q R S kg 52x x S L x S x S L L L x S L L L S x L L S M X S L x L L L x L L M S x M

40 ISO Close Coupled Motor Pump Dimensions (4 Pole) Pump Model Shaft Module kw Motor Frame Dimensions Weight A B C D E F G H J K L M N O P Q R S kg S M M L x S L L L M x L L M S x L L M S M x S M M L x M L M L L L x L L M S M

41 ISO Close Coupled Motor Pump Dimensions (4 Pole) Pump Model Shaft Module kw Motor Frame Dimensions Weight A B C D E F G H J K L M N O P Q R S kg 125x M M L M x M L M L x M L L S M x M L M L L M/S x L M L L S M x L S M Remarks: 1. Standard flange drilling to AS Table "E" 2. Other Drilling options are available on request 3. Dimension are in mm 4. Motor dimensions and data may vary depending on the make of the motor. 41

42 ISO Close Coupled Motor Pump Dimensions (2 Pole) Pump Model Shaft Module kw Motor Frame Dimensions Weight A B C D E F G H J K L M N O P Q R S kg 5x L M S x S M M x M S M x S M M L x M M L M L L x M L L M/S x S M M L x M M L M x L M L

43 ISO Close Coupled Motor Pump Dimensions (2 Pole) Pump Model Shaft Module kw Motor Frame Dimensions Weight A B C D E F G H J K L M N O P Q R S kg 37 2L S/M x L L S/M S M x M M L M L L x M M L M L L x L L S/M S M x S M S M x M L L S/M S M

44 ISO Close Coupled Motor Pump Dimensions (2 Pole) Pump Model Shaft Module kw Motor Frame Dimensions Weight A B C D E F G H J K L M N O P Q R S kg 125x S M S M x S M x S M Remarks: 1. Standard flange drilling to AS Table "E" 2. Other Drilling options are available on request 3. Dimension are in mm 4. Motor dimensions and data may vary depending on the make of the motor. 44

45 ISO Stub Shaft Pump Parts Description Item Description 1 Motor End Adaptor 4 Gland / Mechanical Seal 6 Fastener Set 7 Volute (Casing) 1 Impeller Key 11 Impeller Nut 12A O-Ring 13 Impeller 17 Muff Coupling 18 Muff Coupling Screws 19 Shaft CC 39 Intermediate Cover 5 Impeller Washer 45 Wear-ring Casing Front (Option) 46 Wear-ring Intermediate cover Rear (Option) 47 & 48 Wear-ring Impeller Front & Rear (Option) 64 Plugs - Casing Drain 64A Plugs - Casing Suct & Disch 45

46 Notes 46

47 Chapter Notes Head Chapter Sub Head 47

48 AUSTRALIA / NEW ZEALAND Franklin Electric (Australia) Pty. Ltd Micro Circuit Dandenong South, Victoria 3175 Australia Toll Free: 13 FRANKLIN Fax: Tel: United States Franklin Electric Co., Inc. 4 E. Spring Street, Bluffton, IN USA Tel: Fax: FE474 3/1

Goulds GIS Series. ISO Frame & Stub Shaft Pumps. Goulds Pumps

Goulds GIS Series. ISO Frame & Stub Shaft Pumps. Goulds Pumps Goulds GIS Series ISO Frame & Stub Shaft Pumps Goulds Pumps ISO End Suction Centrifugal Pump - Technical Sales Data The ITT Goulds brand is renowned for manufacturing the highest quality pumping equipment

More information

Goulds GIS Series. ISO Frame & Stub Shaft Pumps. Goulds Pumps

Goulds GIS Series. ISO Frame & Stub Shaft Pumps. Goulds Pumps Goulds GIS Series ISO Frame & Stub Shaft Pumps Goulds Pumps ISO End Suction Centrifugal Pump - Technical Sales Data The ITT Goulds brand is renowned for manufacturing the highest quality pumping equipment

More information

316 Stainless Steel Submersible Pumps 8" 10" 12"

316 Stainless Steel Submersible Pumps 8 10 12 316 Stainless Steel Submersible umps 8" 10" 12" Stainless Steel Submersible umps 40 to 540 m 3 /h The FS Series pumps have been engineered in all AISI 316 stainless steel for efficient and reliable pumping

More information

franklinwater.com 50 Hz 6" STS SERIES Submersible Turbine Pumps

franklinwater.com 50 Hz 6 STS SERIES Submersible Turbine Pumps franklinwater.com 5 Hz 6" STS SERIES Submersible Turbine Pumps 2 FEATURES Premium ductile iron casting for longer life and higher pressures Longer discharge and motor bracket bearings for increased pump

More information

Casing. Impeller. Gland. Shaft. Bearing Bracket. Support Foot RANGE APPLICATIONS

Casing. Impeller. Gland. Shaft. Bearing Bracket. Support Foot RANGE APPLICATIONS Casing Impeller Gland Shaft Bearing Bracket Support Foot RANGE APPLICATIONS Delivery size : up to 150 mm Capacity Head 3 : up to 550 m /hr : up to 100 metres Circulation of water in industries, Air-conditioning

More information

abcdef EUseries EN733/DIN End Suction Centrifugal Pumps where innovation flows SNG

abcdef EUseries EN733/DIN End Suction Centrifugal Pumps   where innovation flows SNG abcdef SNG 09 where innovation flows EN7/DIN 22 End Suction Centrifugal Pumps www.euroflopumps.com Coding System Eg. EU 2 / 1 MBC DB EUM / 2 MBC A2-01 Series EU = Bareshaft pumps EUM = Monobloc pumps X

More information

Submersible Pumps. 5'' CS Series Pumps

Submersible Pumps. 5'' CS Series Pumps 5'' CS Series Pumps 1 Submersible Pumps 5 5 CS CS Series Pumps Features Ordering Information Model Number Explanation 3 CS 4-1 Ordering Information Phase No. of Stages Series m 3 /hr @ BEP Model FE Order

More information

Elite. KSB Australia Pty Ltd. Centrifugal Pump

Elite. KSB Australia Pty Ltd. Centrifugal Pump Type Series Booklet Elite Centrifugal Pump Application The Ajax Elite centrifugal pump is suitable for handling water and similar liquids mainly used in the following applications. -Water Supply -Air conditioning

More information

HYDRO-TITAN. Heavy duty back pullout water & process liquid pumps

HYDRO-TITAN. Heavy duty back pullout water & process liquid pumps HYDRO-TITAN Heavy duty back pullout water & process liquid pumps Positioned for Reliability The total cost of a pump includes not only purchase price, but cost of operation: power costs, reliability, ease

More information

Table of Contents. 4 Submersible Pumps

Table of Contents. 4 Submersible Pumps 5 Hz 4 Submersible Pumps Table of Contents 4 Submersible Pumps 44 Tri-Seal Pumps... 2 18 LPM Tri-Seal... 5 25 LPM Tri-Seal... 7 3 LPM Tri-Seal... 9 45 LPM Tri-Seal... 11 6 LPM Tri-Seal... 13 7 LPM Tri-Seal...

More information

Data sheet. Page: 1 / 5. ETL GGSAV11D BKSBIE3 Inline pump. Operating data. Design

Data sheet. Page: 1 / 5. ETL GGSAV11D BKSBIE3 Inline pump. Operating data. Design Data sheet Page: 1 / 5 Operating data Requested flow rate Operating data determined for maximum inlet pressure Requested developed head 15.00 m Pumped medium Ambient air temperature 20.0 C Fluid temperature

More information

HORIZONTAL SPLIT CASING PUMPS TYPE : UP / UPL / UPH

HORIZONTAL SPLIT CASING PUMPS TYPE : UP / UPL / UPH HORIZONTAL SPLIT CASING PUMPS TYPE : UP / UPL / UPH HORIZONTAL AXIALLY SPLIT CASING PUMPS Range : Delivery size upto 1220 mm Capacity up to 24,000 m³/hr Head up to 180 meters Applications : Suitable for

More information

Contents. Identification

Contents. Identification Contents Identification Type key Product data Introduction Applications Features and benefits Performance range pole pole Construction Sectional drawing Construction features Test pressure Operating conditions

More information

abcdef EJseries Self-Priming Centrifugal Pumps where innovation flows SNG

abcdef EJseries Self-Priming Centrifugal Pumps   where innovation flows SNG abcdef SNG 9 where innovation flows Self-Priming Centrifugal Pumps EJseries www.euroflopumps.com Coding System EJseries Series EJS = Shaft Sewage Bare Pumps EJT = Large Flow Trash Pumps EJU = High Head

More information

TKL. Hydro-Titan Heavy Duty Back Pull-out Water & Process Liquid Pump. Experience In Motion

TKL. Hydro-Titan Heavy Duty Back Pull-out Water & Process Liquid Pump. Experience In Motion TKL Hydro-Titan Heavy Duty Back Pull-out Water & Process Liquid Pump Experience In Motion 1 The total cost of a pump includes not only purchase price, but cost of operation: power costs, reliability, ease

More information

Truck Pumps Water XS439 XS869

Truck Pumps Water XS439 XS869 Truck Pumps Water XS439 XS869 Water Truck 9" BOOK: WTP-005 DATE: Jan. 1, 2012 Features: Volute: Heavy cast iron construction. Back pullout design. Can be rotated for ease of installation. Impeller: Double

More information

PA SERIES END SUCTION CENTRIFUGAL PUMP SINGLE STAGE BACK PULL-OUT DIN24255 THONG FATT JAYA MACHINERY HARDWARE SDN. BHD.

PA SERIES END SUCTION CENTRIFUGAL PUMP SINGLE STAGE BACK PULL-OUT DIN24255 THONG FATT JAYA MACHINERY HARDWARE SDN. BHD. END SUCTION CENTRIFUGAL PUMP SINGLE STAGE BACK PULL-OUT DIN24255 50HZ OR 60HZ PA SERIES APPLICATIONS PA Series pumps can be used for the following services in commercial, residential, agriculture, industrial,

More information

Data sheet. Etaline GN /1852 G10 Version no.: 1 Inline pump. Operating data. Design. Requested developed head m

Data sheet. Etaline GN /1852 G10 Version no.: 1 Inline pump. Operating data. Design. Requested developed head m Data sheet Item no.: 2600 Page: 1 / 5 Operating data Requested flow rate 40.00 m ³/h Actual flow rate 40.00 m ³/h Requested developed head 68.00 m Actual developed head 68.00 m Pumped medium Water Efficiency

More information

8" Submersible Turbine Pump 450 GPM

8 Submersible Turbine Pump 450 GPM 8" Submersible Turbine Pump 450 GPM Submersible Turbine Pumps Features Premium ductile iron casting for longer life and higher pressures Longer discharge and motor bracket bearings for increased pump life

More information

GIS/ GISO Series End Suction Pumps TECHNICAL BULLETIN

GIS/ GISO Series End Suction Pumps TECHNICAL BULLETIN GIS/ GISO Series End Suction Pumps TECHNICAL BULLETIN Goulds Water Technology is renowned for manufacturing the highest quality pumping equipment utilizing the best engineering practices available worldwide.

More information

Data sheet. Page: 1 / 5 ETN GG A 11GA201502B. Operating data. Design. Requested developed head m. Efficiency 74.

Data sheet. Page: 1 / 5 ETN GG A 11GA201502B. Operating data. Design. Requested developed head m. Efficiency 74. Data sheet Page: 1 / 5 Operating data Requested flow rate 160.00 m³/h Actual flow rate 159.85 m³/h Operating data determined for maximum inlet pressure Actual developed head 20.96 m Requested developed

More information

KIRLOSKAR END SUCTION PUMPS-TYPE DB/DBHS. Description. Cut-sectional View. Shaft :

KIRLOSKAR END SUCTION PUMPS-TYPE DB/DBHS. Description. Cut-sectional View. Shaft : KIRLOSKAR END SUCTION PUMPS-TYPE DB/DBHS Description Range : Delivery size up to 150 mm Capacity up to 550 m 3 /hr Head up to 100 metres Applications : Suitable for Circulation of Water in Industries,

More information

Features: Applications: Irrigation. Commercial. Construction. Municipal. Mining

Features: Applications: Irrigation. Commercial. Construction. Municipal. Mining Frame Mount 7.5" BOOK: FMT-015 DATE: Mar. 1, 2012 Features: Volute: Ductile iron for heavy-duty service. Back pullout design. Can be rotated for ease of installation. Impeller: Enclosed design for high

More information

Data sheet. Etaline GN /3002 G11 Version no.: 1 Inline pump. Operating data. Design. Clean water. Efficiency 61.6 % 20.0 C.

Data sheet. Etaline GN /3002 G11 Version no.: 1 Inline pump. Operating data. Design. Clean water. Efficiency 61.6 % 20.0 C. Data sheet Item no.: 1900 Page: 1 / 5 Operating data Pumped medium Water Actual flow rate 72.19 m ³/h Operating data determined for maximum inlet pressure Actual developed head 70.26 m Clean water Efficiency

More information

ST, XT & SU SELF PRIMING PUMPS

ST, XT & SU SELF PRIMING PUMPS ST, XT & SU SELF PRIMING PUMPS VOLUME ONE ISSUED JANUARY, 214 ST, XT & SU SELF PRIMING PUMPS Heavy duty, self priming trash pumps. Reliable dirty water and solids handling pumping performance for water

More information

CENTRIFUGAL PUMPS CLOSE-COUPLED 9" FEATURES SPECIFICATIONS APPLICATIONS

CENTRIFUGAL PUMPS CLOSE-COUPLED 9 FEATURES SPECIFICATIONS APPLICATIONS FEATURES Volute: Heavy-duty cast iron construction; back pullout design; can be rotated for ease of installation Impeller: Enclosed, cast iron design for high efficiency; hydraulically balanced for reduced

More information

SUBMERSIBLE TURBINE PUMPS

SUBMERSIBLE TURBINE PUMPS FEATURES Premium ductile iron casting for longer life and higher pressures Longer discharge and motor bracket bearings for increased pump life Spiral cutlass rubber intermediate bearings designed for abrasive

More information

End suction back pull-out pumps for general industry, mining, rural and building services

End suction back pull-out pumps for general industry, mining, rural and building services End suction back pull-out pumps for general industry, mining, rural and building WHY COMPROMISE? The TKL KL-ISO end suction, back pull-out pump range is anything but ordinary it is the result of an intensive

More information

KIRLOSKAR HORIZONTAL AXIALLY SPLIT CASING PUMPS - TYPE DSM

KIRLOSKAR HORIZONTAL AXIALLY SPLIT CASING PUMPS - TYPE DSM KIRLOSKAR HORIZONTAL AXIALLY SPLIT CASING PUMPS - TYPE DSM Description Range : Delivery size up to 150 mm Capacity up to 470 m 3 /hr Head up to 180 metres Application : Suitable for Water Works, Circulation

More information

XFLO XS SERIES. Single Stage Double Suction Split Casing Centrifugal Pump

XFLO XS SERIES. Single Stage Double Suction Split Casing Centrifugal Pump XFLO P U M P S XS SERIES Single Stage Double Suction Split Casing Centrifugal Pump General and Construction 1. Applications Waterworks, Irrigation, Drainage pumping stations, Power stations, Industrial

More information

FLOMAX SELF PRIMING CENTRIFUGAL PUMP FEATURES. 3 MP PUMPS, INC. PHONE: (800) FAX: (586) FLOMAX 5 FLOMAX 8

FLOMAX SELF PRIMING CENTRIFUGAL PUMP FEATURES. 3 MP PUMPS, INC. PHONE: (800) FAX: (586) FLOMAX 5 FLOMAX 8 FLOMAX 5 8 10 SELF PRIMING CENTRIFUGAL PUMP FEATURES CLOSED COUPLED TO ELECTRIC MOTOR PUMPAK ONLY TO MOUNT TO STANDARD NEMA C FACE MOTOR FLOWS - 100-750 GPM PRESSURES - 100-230 FEET HEAD AVAILABLE IN:

More information

Data sheet. Page: 1 / 7. ETL GG AV11D BKSBIE3M Inline pump. Operating data. Design

Data sheet. Page: 1 / 7. ETL GG AV11D BKSBIE3M Inline pump. Operating data. Design Data sheet Page: 1 / 7 Operating data Requested flow rate Requested developed head Pumped medium Ambient air temperature 20.0 C Fluid temperature 20.0 C Fluid density 998 kg/m³ Water Clean water Not containing

More information

The e-nsc End Suction Pump Series

The e-nsc End Suction Pump Series NEW The e-nsc End Suction Pump Series Your go-to single-stage pump for heavy-duty use STANDARDIZED TO EN733, ISO 5199 AND DIRECTIVE 9/125/EC. POTABLE WATER APPROVED (ACS AND DM174). It s not your standard

More information

Cast Iron Submersible Pumps 10" 12" 14"

Cast Iron Submersible Pumps 10 12 14 Cast Iron Subersible ups 1" 1" 14" Subersible ups Cast Iron Subersible ups 5-54 3 /h The FT Series pups have been engineered in a Cast Iron construction for efficient and reliable puping of water for agricultural,

More information

Company name: BKB Building Solutions Created by: Michael Chlopek Phone: Date: 13/03/2017

Company name: BKB Building Solutions Created by: Michael Chlopek Phone: Date: 13/03/2017 Position Qty. Description 1 NB 1-31/29 A-F2-B-E-BAQE Phone: 4 84 61 Date: 13/3/217 Product No.: On request Non-self-priming, single-stage, centrifugal volute pump designed according to ISO 199 with dimensions

More information

5" Submersible Turbine Pump 120 GPM

5 Submersible Turbine Pump 120 GPM 5" Submersible Turbine Pump 120 GPM Submersible Turbine Pumps Features: n 100% Franklin Electric factory wet tested with test results shipped with each pump n Premium ductile iron casting for longer life

More information

HORIZONTAL SPLIT CASING PUMP

HORIZONTAL SPLIT CASING PUMP HORIZONTAL SPLIT CASING PUMP HORIZONTAL PUMP CONSTRUCTION MBH Horizontal Split Casing Pumps - a new concept for better performance and higher efficiencies. For greater interchangeability and ease of maintenance,

More information

5" Submersible Turbine Pump 220 GPM

5 Submersible Turbine Pump 220 GPM 5" Submersible Turbine Pump 220 GPM Submersible Turbine Pumps Features: n 00% Franklin Electric factory wet tested with test results shipped with each pump n Premium ductile iron casting for longer life

More information

franklinwater.com 50 Hz VR SERIES Vertical Multi-Stage Pumps

franklinwater.com 50 Hz VR SERIES Vertical Multi-Stage Pumps franklinwater.com 5 Hz VR SERIES Vertical Multi-Stage Pumps 5 HZ VR SERIES VERTICAL MULTI-STAGE PUMPS Features 2 Applications 2 Pump Specifications Counter-Flange Kits Motor Specifications 4 Ordering

More information

SIL Inline Single Stage Centrifugal Pumps

SIL Inline Single Stage Centrifugal Pumps SIL Inline Single Stage Centrifugal Pumps SIL Inline Pump Range True Reliability Sulzer s new inline pump range (SIL) has been designed to fulfill efficiency regulations across all industries and also

More information

855 Filtrate Pump, Close Coupled and Overhead Mounted Pumps

855 Filtrate Pump, Close Coupled and Overhead Mounted Pumps 855 Filtrate Pump, Close Coupled and Overhead Mounted Pumps Technical Specification Pages This page left intentionally blank. 1.0 Overview. The 855 Series is Carver s offering specifically designed to

More information

ITT. Goulds Pumps. G&L Series SSH S & M-Group 316 Stainless Steel End Suction Pumps. Engineered for life. Commercial Water.

ITT. Goulds Pumps. G&L Series SSH S & M-Group 316 Stainless Steel End Suction Pumps. Engineered for life. Commercial Water. ITT Goulds Pumps G&L Series SSH S & M-Group 316 Stainless Steel End Suction Pumps www.goulds.com Engineered for life A Full Range of Product Features Superior Materials of Construction: AISI Type 316L

More information

Lowara. Centrifugal Electric Pumps Manufactured in AISI 316 Stainless Steel in Compliance with EN 733. SH Series. 60 Hz

Lowara. Centrifugal Electric Pumps Manufactured in AISI 316 Stainless Steel in Compliance with EN 733. SH Series. 60 Hz Centrifugal Electric Pumps Manufactured in AISI 316 Stainless Steel in Compliance with EN 733 SH Series 60 Hz SERIE SH HYDRAULIC PERFORMANCE RANGE AT 60 Hz WEB 10-2006 2 CONTENTS 5 Specifications... 6

More information

Ajax ISO. Centrifugal Pump ISO Application Application. Designation Designation. Operating Data - 50 Hz. Design. Type Series Booklet

Ajax ISO. Centrifugal Pump ISO Application Application. Designation Designation. Operating Data - 50 Hz. Design. Type Series Booklet Type Series Booklet Ajax ISO Centrifugal Pump ISO 288 Application Application The KSB Ajax ISO centrifugal pump is suitable for handling water and similar liquids mainly used in the following The KSB Ajax

More information

Matrix_Techdata_SS_V14

Matrix_Techdata_SS_V14 Matrix_Techdata_SS_V4 CONTENTS V4 SPECIFICATIONS Page Features & Applications Typical Exploded View Pump & Motor Specifications Selection Chart / Type key 3 Selection Chart 4 PERFORMANCE CURVES Performance

More information

Selection Chart Project: Model: Chk d: Date: C C V V V A CAPACITY

Selection Chart Project: Model: Chk d: Date: C C V V V A CAPACITY Selection Chart Project: Model: Chk d: Date: 45 (Ft) (m) 15.0 HZ (Synchronous Speed - 1800 RPM) 35 C2905-7 25.0 8.0 C1125-17 C15-1170 C2185-885 7.0 TOTAL HEAD 15 6.0 5.0 C1455-1170 V0494-1170 V0554-1170

More information

FE Frame-Mounted End Suction Pumps. Leading The Flow. TACO.

FE Frame-Mounted End Suction Pumps. Leading The Flow. TACO. FE Frame-Mounted End Suction Pumps Leading The Flow. TACO. Quiet, dependable power and proven performance. FE Series Pumps meet the latest standards for hydraulic performance and dimensional characteristics.

More information

Axial geteilte Spiral-gehӓusepumpen Axial split case pumps ASE ( ) PUMPS I MOTORS I SYSTEMS I SERVICES

Axial geteilte Spiral-gehӓusepumpen Axial split case pumps ASE ( ) PUMPS I MOTORS I SYSTEMS I SERVICES ASE ( ) PUMPS I MOTORS I SYSTEMS I SERVICES Introduction RITZ ( ) ASE axial split case pumps has been developed for wide range of application benefiting both the industrial users and the municipality.

More information

SMD axially split casing, double suction pump

SMD axially split casing, double suction pump SMD axially split casing, double suction pump Main applications SMD single stage, double suction, axial split casing pumps are designed to meet the needs of the water market for a wide range of raw, clean,

More information

Pumps Motors ISO 9001 Company

Pumps Motors ISO 9001 Company SERIES DATA BOOKLET EndSuction Centrifugal Monoblock Pumps 6 Hz Pumps Motors ISO 91 Company Pumping Solution Contents Endsuction centrifugal monoblock pumps Product data Introduction Applications Features

More information

RS Multi-Stage, Ring Section Pumps

RS Multi-Stage, Ring Section Pumps RS Multi-Stage, Ring Section Pumps Technical Specification Pages This page left intentionally blank. 1.0 Overview. The RS Series is Carver s multi-stage pump for fluids at moderate to high pressures. The

More information

Basic Hydraulic Features. Basic Mechanical Features

Basic Hydraulic Features. Basic Mechanical Features APRIL 2006 1.0 Overview The ETA is designed for flow rates that fall beyond the range of most end suction pumps. Performance extends to 9,500 GPM, 440 feet of head, and 88% efficiency. This range is covered

More information

Submersible Stainless Steel Semi-Vortex Pumps Pumps

Submersible Stainless Steel Semi-Vortex Pumps Pumps Technical Data Right Submersible Stainless Steel Semi-Vortex Pumps Pumps EBARA PUMPS AUSTRALIA PTY. LTD. DWVOX_Techdata_SS_ Right_Techdata_DS_ CONTENTS -SPECIFICATIONS Page Features & Applications 100

More information

Trash- and Solids-Handling Centrifugal Pumps Series 2100 Quality Design Features Assure Long, Trouble-Free Service

Trash- and Solids-Handling Centrifugal Pumps Series 2100 Quality Design Features Assure Long, Trouble-Free Service Trash- and Solids-Handling Centrifugal Pumps Series 2100 Quality Design Features Assure Long, Trouble-Free Service WIDE RANGE OF APPLICATIONS: Liquids Entrained with Solids General Industrial, Pulp & Paper,

More information

EN. 850 Filtrate Pumps. Technical Specification Pages

EN. 850 Filtrate Pumps. Technical Specification Pages 850 17.01.EN 850 Filtrate Pumps Technical Specification Pages 850 Series Filtrate Pump 850 17.01.EN This page left intentionally blank. 1.0 Overview. The 850 is Carver s filtrate pump line designed for

More information

SUBMERSIBLE TURBINE PUMPS

SUBMERSIBLE TURBINE PUMPS " STS SERIES - GPM FEATURES % factory wet tested with test results shipped with each pump Premium ductile iron casting for longer life and higher pressures Longer discharge and motor bracket bearings for

More information

STARLINE MOTORPUMPS TECHNICAL DATA

STARLINE MOTORPUMPS TECHNICAL DATA PUMP CENTRIFUGAL PUMP A F X* A H2 C L H1 Pump MODEL Shaft No. MOTOR HP Pumps with 3500 RPM (Nominal Speed ) TEFC Motors FRAME SIZE Inlet D R Outlet IMP Dia E ØK P G J B Pump Dimensions (INCHES) A B C D

More information

CENTRIFUGAL PUMPS SAE ENGINE DRIVE 10" FEATURES

CENTRIFUGAL PUMPS SAE ENGINE DRIVE 10 FEATURES FEATURES Volute: Heavy ductile iron construction; back pullout design; can be rotated for ease of installation Impeller: Ductile iron enclosed design for high efficiency; superior NPSH characteristics

More information

ISO2858 END SUCTION PUMPS TECHNICAL DATA

ISO2858 END SUCTION PUMPS TECHNICAL DATA CENTRIFUGAL PUMP PUMP X F Ø OUTLET A L Ø INLET H2 Standard Flange Drilling to AS2129-1982 Table E. Other drilling options available on request. D T2 T1 H1 Dimensions in millimetres. Pump Size Inlet Outlet

More information

NK /310A2F1AE-SBAQE

NK /310A2F1AE-SBAQE GRUNDFOS DATA BOOKLET NK15-315/31A2F1AE-SBAQE Grundfos Pump 98318632 Thank you for your interest in our products Please contact us for more information, or visit our website https://www.lenntech.com/grundfos/nkbasis/98318632/nk-15-315-31-a2-f-a-e-baqe.html

More information

SXHS SLURRY PUMPS VOLUME ONE ISSUED FEBRUARY 20, 2013

SXHS SLURRY PUMPS VOLUME ONE ISSUED FEBRUARY 20, 2013 SXHS SLURRY PUMPS VOLUME ONE ISSUED FEBRUARY 2, 213 SXHS HORIZONTAL SLURRY PUMPS Heavy duty, horizontal slurry pumps. High efficiency transfer of abraisive and high density slurries with extended wear

More information

6 50 Hz Stainless Steel Submersible Pumps

6 50 Hz Stainless Steel Submersible Pumps Hz Stainless Steel Subersible Pups -Inch: 1, 19,, & /h flow ratings Advanced technology in perforance and reliability. Stainless Steel Subersible Pups Subersible Pups - Hz 7 U S gp 1 1 SR 19 up to 7 kw

More information

SUBMERSIBLE TURBINE PUMPS

SUBMERSIBLE TURBINE PUMPS FEATURES 1% Franklin Electric factory wet tested with test results shipped with each pump Premium ductile iron casting for longer life and higher pressures Longer discharge and motor bracket bearings for

More information

General. Shaft Seal. Nozzle Orientations. Field of Application. Design. Drive. Bearings. Product Catalogue

General. Shaft Seal. Nozzle Orientations. Field of Application. Design. Drive. Bearings. Product Catalogue Product Catalogue ETA C and D General The well-known ETA-pump on the bearing bracket C and D is constructed in accordance with DIN 24 255 standard and completes the performance range up to max. 100 m3/hr

More information

TP /4-A-F-A-BQQE 400Y 50HZ

TP /4-A-F-A-BQQE 400Y 50HZ GRUNDFOS DATA BOOKLET TP 4-1/4-A-F-A-BQQE 4Y 5HZ Grundfos Pump 9686883 Thank you for your interest in our products Please contact us for more information, or visit our website https://www.lenntech.com/grundfos/tp/9686883/tp-4-1-4-a-f-a-bqqe.html

More information

SUBMERSIBLE TURBINE PUMPS

SUBMERSIBLE TURBINE PUMPS FEATURES 1% factory wet tested with test results shipped with each pump Hydraulic optimization for exceptional abrasive handling Ductile iron motor bracket and discharge for extended pump life Premium

More information

MONOBLOC CENTRIFUGAL ELECTRIC PUMP IN COMPLIANCE WITH EN 733 in cast iron

MONOBLOC CENTRIFUGAL ELECTRIC PUMP IN COMPLIANCE WITH EN 733 in cast iron Cast iron monobloc centrifugal electric pumps in compliance with EN 733. APPLICATIONS Moving clean water for civil, agricultural, industrial use, pressure boosting units, heating and air conditioning plants

More information

MAH HORIZONTAL SLURRY PUMPS

MAH HORIZONTAL SLURRY PUMPS MA H SLURRY PUMPS MAH HORIZONTAL SLURRY PUMPS Heavy duty, horizontal slurry pumps. High efficiency transfer of abraisive and high density slurries with extended wear life and reliable service intervals.

More information

PROCESS PUMPS MODEL V200 ANSI B73.2

PROCESS PUMPS MODEL V200 ANSI B73.2 EAGLE PROCESS PUMPS V200 ANSI B73.2 POWER END Shaft Diameters Bearings Stuffing Box PUMP END Maximum Diameter Solids Minimum Casing Thickness Casing Corrosion Allowance Working Pressure Test Pressure

More information

SUBMERSIBLE TURBINE PUMPS

SUBMERSIBLE TURBINE PUMPS FEATURES 100% factory wet tested with test results shipped with each pump Premium ductile iron casting for long life and high pressures Longer discharge and motor bracket bearings for increased pump life

More information

CENTRIFUGAL PUMPS 7.5" FRAME MOUNT SERIES FEATURES

CENTRIFUGAL PUMPS 7.5 FRAME MOUNT SERIES FEATURES FEATURES Volute: Ductile iron volute for heavy-duty service; back pullout design; can be rotated for ease of installation Impeller: Enclosed design for high efficiency; configured for superior NPSH characteristics;

More information

Submersible. Pumps Motors. 60Hz 10 Submersible Pump. Pumping Solution

Submersible. Pumps Motors. 60Hz 10 Submersible Pump. Pumping Solution Submersible Pumps Motors Hz Submersible Pump Pumping Solution Product data Submersible bore well pumps Construction Submersible motor & pumps for deep wells of (DN mm). Sized for connection to the motor

More information

Normpumpen nach DIN EN 733 einschl Standard horizontal pumps to DIN EN 733 NORMA J ( ) PUMPS I MOTORS I SYSTEMS I SERVICES

Normpumpen nach DIN EN 733 einschl Standard horizontal pumps to DIN EN 733 NORMA J ( ) PUMPS I MOTORS I SYSTEMS I SERVICES NORMA J ( ) PUMPS I MOTORS I SYSTEMS I SERVICES Introduction Pumps of the Norma J ( ) Series are horizontal volute casing centrifugal end suction pumps with Back Pull-out feature. Principal dimensions

More information

Heat Transfer Fluid / Hot Water Pump HPK-L. Type Series Booklet

Heat Transfer Fluid / Hot Water Pump HPK-L. Type Series Booklet Heat Transfer Fluid / Hot Water Pump HPK-L Type Series Booklet Legal information/copyright Type Series Booklet HPK-L All rights reserved. The contents provided herein must neither be distributed, copied,

More information

TP /2-A-F-A-BQQE 400D 50HZ

TP /2-A-F-A-BQQE 400D 50HZ GRUNDFOS DATA BOOKLET TP 65-46/2-A-F-A-BQQE 4D 5HZ Grundfos Pump 9687526 Thank you for your interest in our products Please contact us for more information, or visit our website https://www.lenntech.com/grundfos/tp/9687526/tp-65-46-2-a-f-a-bqqe.html

More information

3312 Model. pumping Model Model AURORA Series HORIZONTAL AND VERTICAL CLOSE-COUPLED PUMPS

3312 Model. pumping Model Model AURORA Series HORIZONTAL AND VERTICAL CLOSE-COUPLED PUMPS 3312 Model pumping 3314 Model 3311 Model AURORA 3310 Series HORIZONTAL AND VERTICAL CLOSE-COUPLED PUMPS WWW.AURORAPUMP.COM AURORA 3310 Series Horizontal and Vertical Close-Coupled Pumps Capacities to 3800

More information

CENTRIFUGAL PUMPS 13" CLOSE-COUPLED FEATURES

CENTRIFUGAL PUMPS 13 CLOSE-COUPLED FEATURES FEATURES Volute: Cast iron for heavy-duty service; back pull-out design; can be rotated for ease of installation; split volutes for reduction in radial bearing load (6 x 8-13 and 8 x 10-13) Impeller: Enclosed

More information

CM5-5 A-R-A-E-AVBE F-A-A-N

CM5-5 A-R-A-E-AVBE F-A-A-N GRUNDFOS DATA BOOKLET CM5-5 A-R-A-E-AVBE F-A-A-N Grundfos Pump 9686818 Thank you for your interest in our products Please contact us for more information, or visit our website https://www.lenntech.com/grundfos/cmbasis/9686818/cm5-5-a-r-a-e-avbe.html

More information

CP Centrifugal pumps PERFORMANCE RANGE INSTALLATION AND USE APPLICATION LIMITS PATENTS - TRADE MARKS - MODELS CONSTRUCTION AND SAFETY STANDARDS

CP Centrifugal pumps PERFORMANCE RANGE INSTALLATION AND USE APPLICATION LIMITS PATENTS - TRADE MARKS - MODELS CONSTRUCTION AND SAFETY STANDARDS CP Centrifugal pumps PERFORMANCE RANGE Flow rate up to 900 l/min (54 m³/h) Head up to 74 m APPLICATION LIMITS Manometric suction lift up to 7 m Liquid temperature between -10 C and +90 C Ambient temperature

More information

Lowara. Centrifugal electric pumps made of AISI 316 stainless steel in compliance with EN 733. SH Series. 50 Hz

Lowara. Centrifugal electric pumps made of AISI 316 stainless steel in compliance with EN 733. SH Series. 50 Hz Centrifugal electric pumps made of AISI 316 stainless steel in compliance with EN 733 SH Series 50 Hz SERIE SH OPERATING CHARACTERISTICS AT 50 Hz PRINT 05-2007 2 CONTENTS 5 Specifications......................................................................

More information

MTB /183 A-F-A-BQQV 400D-2 11kW

MTB /183 A-F-A-BQQV 400D-2 11kW GRUNDFOS DATA BOOKLET MTB 65-2/13 A-F-A-BQQV D-2 11kW Grundfos Pump 965751 Thank you for your interest in our products Please contact us for more information, or visit our website https://www.lenntech.com/grundfos/mtb/965751/mtb-65-2-13-a-f-a-bqqv.html

More information

AURORA 3500 SERIES MODEL 3550 ASME/ANSI B73.1 INDUSTRIAL PROCESS PUMPS

AURORA 3500 SERIES MODEL 3550 ASME/ANSI B73.1 INDUSTRIAL PROCESS PUMPS AURORA 3500 SERIES MODEL 3550 ASME/ANSI B73.1 INDUSTRIAL PROCESS PUMPS WWW.AURORAPUMP.COM INDUSTRIAL PROCESS PUMPS AURORA 3500 SERIES Model 3550 ASME/ANSI B73.1 Industrial Process Pumps Capacities to GPM

More information

AURORA Series MODEL 3560 ASME/ANSI B73.1M INDUSTRIAL PROCESS PUMPS

AURORA Series MODEL 3560 ASME/ANSI B73.1M INDUSTRIAL PROCESS PUMPS AURORA 3500 Series MODEL 3560 ASME/ANSI B73.M INDUSTRIAL PROCESS PUMPS WWW.AURORAPUMP.COM AURORA 3500 Series Model 3560 ASME/ANSI B73.M Industrial Process Pumps Capacities to 7000 GPM (590 m 3 /hr) Heads

More information

TP /2-A-F-A-BAQE 400D 50HZ

TP /2-A-F-A-BAQE 400D 50HZ GRUNDFOS DATA BOOKLET TP 32-38/2-A-F-A-BAQE 4D 5HZ Grundfos Pump 968677 Thank you for your interest in our products Please contact us for more information, or visit our website https://www.lenntech.com/grundfos/tp/968677/tp-32-38-2-a-f-a-baqe.html

More information

SIHI multi. Modular multistage pumps. Type MSL, MSM. Description. Construction. Applications. Technical Data. Options

SIHI multi. Modular multistage pumps. Type MSL, MSM. Description. Construction. Applications. Technical Data. Options Modular multistage pumps SIHI multi Type MSL, MSM Description SIHI multi pumps are horizontal multistage centrifugal pumps of ring-section design, which meet the technical requirements of ISO 5199 / EN

More information

CENTRIFUGAL PUMPS according to DIN standard

CENTRIFUGAL PUMPS according to DIN standard CENTRIFUGAL PUMPS according to DIN 2255 standard End suction centrifugal pumps in accordance with DIN 2255 made of cast iron, applications in water boosting, heating system, airconditioning, washing systems

More information

EUF/EUFS series. Fire Pump PSB Listed according to CP52(Singapore)

EUF/EUFS series. Fire Pump PSB Listed according to CP52(Singapore) ANNEX 1: SPECIMEN OF LOGO and MARK A) SETSCO (Registered) Logo where innovation f l ow s B) SETSCO Mark for Ready-Mixed Concrete Cert No: RMC-YYYY-XXX-A C) SETSCO Mark for Fire Safety Products Fire Pump

More information

CENTRIFUGAL PUMPS CLOSE-COUPLED 7.5" FEATURES

CENTRIFUGAL PUMPS CLOSE-COUPLED 7.5 FEATURES FEATURES Volute: Ductile iron for heavy-duty service; back pullout design; can be rotated for ease of installation Impeller: Enclosed design for high efficiency; configured for superior NPSH characteristics;

More information

CPS. Horizontal Split Case Centrifugal Pump

CPS. Horizontal Split Case Centrifugal Pump CPS Horizontal Split Case Centrifugal Pump CPS Series pumps, are single-stage double suction split case centrifugal pumps designed for applications of clean water or similar liquids without solids in water

More information

SIHI multi Type MSC. Modular multistage pumps. Description. Construction. Applications. Optional special designs. Materials.

SIHI multi Type MSC. Modular multistage pumps. Description. Construction. Applications. Optional special designs. Materials. Modular multistage pumps SIHI multi Type MSC Description The SIHI multi MSC range of horizontal, ring-section multistage pumps have been designed for long-term reliability when pumping high pressure liquids.

More information

EBARA Submersible Propeller Pumps Contents Project: Model: Chk d: Date: Model

EBARA Submersible Propeller Pumps Contents Project: Model: Chk d: Date: Model Contents Model A0553 C1125 V0494 A0713 C1285 V0554 A0843 C1455 V0754 A03 C15 V0854 C1915 V0974 C2185 V1154 C2905 Section Page Specifications 3-3 Model Designation 3-6 Impeller Data 3-8 Material Specifications

More information

CS Series Pumps. Commercial Pumps APPLICATIONS. Davey CS Series pumps? Experts in water.

CS Series Pumps. Commercial Pumps APPLICATIONS. Davey CS Series pumps? Experts in water. Commercial Pumps Experts in water. APPLICATIONS Vineyards Diary washdown Chiller water pumping Hot water washing Treated water transfer Small industrial applications Why choose the Davey CS Series pumps?

More information

Waterflo WF Series Back pull-out End Suction Centrifugal pump

Waterflo WF Series Back pull-out End Suction Centrifugal pump 08 Waterflo WF AKAY INDUSTRIES AKAY WATERFLO WF SERIES Akay WATERFLO WF Series range fully complies to both performance and dimensional standards to the international Standard DIN 24255 Stuffing Box Standard

More information

Company name: Created by: Phone:

Company name: Created by: Phone: Position Qty. Description 1 TP 8-/2 A-F-A-BQQE Date: 29/1/18 Product No.: 9618724 Single-stage, close-coupled, volute pump with in-line suction and discharge ports of identical diameter. The pump is of

More information

NB /193 A-F2-A-BAQE

NB /193 A-F2-A-BAQE GRUNDFOS DATA BOOKLET NB100-200/193 A-F2-A-BAQE Grundfos Pump 98305367 Thank you for your interest in our products Please contact us for more information, or visit our website https://www.lenntech.com/grundfos/nb000/98305367/nb-100-200-193-a-f2-a-e-baqe.html

More information

SMN Double-Suction Axially Split Pump

SMN Double-Suction Axially Split Pump SMN Double-Suction xially Split Pump motralec 4 rue Lavoisier. Z Lavoisier. 95223 HERBLY CEDEX Tel. : 01.39.97.65.10 / Fax. : 01.39.97.68.48 Demande de prix / e-mail : service-commercial@motralec.com www.motralec.com

More information

2CDX. EBARA PUMPS EUROPE S.p.A. CENTRIFUGAL PUMPS. Page

2CDX. EBARA PUMPS EUROPE S.p.A. CENTRIFUGAL PUMPS. Page CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY AND CURVE SPECIFICATIONS 202 PERFORMANCE CURVE 70 203 PERFORMANCE CURVE 120 204 PERFORMANCE CURVE 200 205 - CONSTRUCTIONS 300 SECTIONAL VIEW

More information

Company name: Created by: Phone:

Company name: Created by: Phone: Position Qty. Description 1 TP -42/2 A-F-A-BQQE Date: 26/1/218 Product No.: 9874287 Single-stage, close-coupled, volute pump with in-line suction and discharge ports of identical diameter. The pump is

More information

DUMPER. Data Book 50 Hz

DUMPER. Data Book 50 Hz Data Book 50 Hz CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY 202 GAMMA 203 CURVE SPECIFICATIONS 204 1X 51-S 205 1X 51.5-S 206 2X 51.5-S 207 2X 52.2-S 208 2X 53-S 209 3X 53.7-S 210 3X

More information

Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY 202 CURVE SPECIFICATIONS 203 PERFORMANCE CHART COMPACT A 204 PERFORMANCE CHART COMPACT B 205

Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY 202 CURVE SPECIFICATIONS 203 PERFORMANCE CHART COMPACT A 204 PERFORMANCE CHART COMPACT B 205 CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY 202 CURVE SPECIFICATIONS 203 PERFORMANCE CHART A 204 PERFORMANCE CHART B 205 - CONSTRUCTIONS 300 SECTIONAL VIEW 300 MECHANICAL SEALS 301

More information