Addendum #2 PRICE SCHEDULE 1.0 BOX OPTIONS
|
|
- Jordan Harrington
- 5 years ago
- Views:
Transcription
1 Addendum #2 PRICE SCHEDULE 1.0 BOX OPTIONS PROVIDED INFORMATION P/N# Misc PRICE Gatesaver Hyd Tailgate Insert Installed $2, Frame End cap W/OEM Stop-Tail-Turn Light mounts (Required if no rear hitch $ selected), Installed License plate light at rear (for weld on cabshields) $ Front mudflaps w/ brkts and hard Plastic Flap - INSTALLED $ FRONT MUDFLAPS, 36" Rubber Flap - INSTALLED $ Carbon Steel, Interior Step, Installed (ea) $ Grab Handle, un-plated, installed (ea) $ J-Craft High & Slide Tailgate $1, Backup Alarm, PRECO model 1020, installed $ RWSS Road watch system, Installed $ RWSS Road watch system, SHIPOUT $ RWSS Road watch Sensor & 12' Cable Installed $ Road watch (Force America) Interface Harness Only for 6100 $ SGL AXLE 2" Thick OAK (rough sawn) side boards, Installed. $ TDM AXLE 2" Thick OAK (rough sawn) side boards, Installed. $ SGL OR TDM AXLE 2" x 6" Black POLY BANG BOARDS, fitted to body and installed $ with center supports SGL OR TDM AXLE 2" x 8" Black POLY BANG BOARDS, fitted to body and installed $ with center supports SGL OR TDM AXLE 2" x 10" Black POLY BANG-BOARDS, fitted to body and installed $ with center supports " bolt-on, bolt-together spillshield. 1/4" construction, painted & fitted to body via $ sander brkts, shipped loose " bolt-on, bolt-together spillshield. 1/4" construction, painted & fitted to body via $ sander brkts, shipped loose " bolt-on, bolt-together spillshield. 1/4" construction, painted & fitted to body via $ sander brkts, shipped loose A-FRAME for Hook lift complete w/rollers SGL & TDM $2, Gatesaver Hyd Tailgate insert (Ship out) $1, Standard Hydraulic High Lift Tailgate with Electric Double Acting Power Unit Installed $1, Standard Air High Lift Tailgate with Valve Kit Installed $2, Material Control Tailgate Installed $8, On Spot Tire Chains System Installed $1, INSTA-CHAIN TIRE KIT (6 Chain Set) - INSTALLED $2, INSTA-CHAIN TIRE KIT (12 Chain Set) - INSTALLED $2, CONSPICUITY TAPE, Installed (Single or Tandem Application) $ Airtrip, Manual Push-Pull Valve IN LIEU of Solenoid Valve Installed $ DOT of Truck $ Snow Stake Pockets Thru Boxed Top Rail $ P/N# Cabshield PRICE Cabshield, 1/2 type (24") weld-on style attached $ Cabshield, SS 1/2 type (24") weld-on style attached $1, Cabshield, 1/2 type Stationary Free-Standing style, w/plain stainless steel canopy, & $2, shovel holders, Installed Cabshield, 1/2 type Stationary Free-Standing style, w/painted carbon steel canopy, & $1, shovel holders, Installed Cabshield, 1/2 type Stationary Free-Standing style, w/plain stainless steel canopy, $2, shovel holders, & mounts for cabshield mounted reservior, Installed Cabshield, 1/2 type Stationary Free-Standing style, w/painted carbon steel canopy, $1, shovel holders, & mounts for cabshield mounted reservior, Installed.
2 Broom holder ring type (ea) $ Shovel Holder, Vertical fork/ring style (ea) $ line sander manifold in RH rear corner post $ Dual "split" sander manifolds in rear corner posts $ Fixed (Center) strobe mount (on cabshield) $ Self-leveling (Center) strobe mt (on cabshield) $ Tailgate top lever pin release (Single Axle bodies only) $ Couger DC V Vibrator SHIP OUT $ HEAT INSTALLATION PKG - STAINLESS STEEL DIVERTER BOX - MANUAL KIT-INS $1, HEAT INSTALLATION PKG - STAINLESS STEEL DIVERTER BOX - AUTOMATIC KIT- $2, INSTALL TOW HOOK $ TIMBREN, FRONT SUSPENSION PKG INS $1, P/N# Walkrails & Ladders PRICE Walkrail (3-1/2" open-grip) full length, both sides of 10' MX body $ Walkrail (3-1/2" open-grip) full length, both sides of 11' MX body $ Walkrail (3-1/2" open-grip) full length, both sides of 12' MX body $ Walkrail (3-1/2" open-grip) full length, both sides of 13' MX body $ Walkrail (3-1/2" open-grip) full length, both sides of 15' MX body $ Walkrail (3-1/2" open-grip) full length, both sides of 10' MXR body $ Walkrail (3-1/2" open-grip) full length, both sides of 11' MXR body $ Walkrail (3-1/2" open-grip) full length, both sides of 12' MXR body $ Walkrail (3-1/2" open-grip) full length, both sides of 13' MXR body $ Walkrail (3-1/2" open-grip) full length, both sides of 14' MXR body $ Walkrail (3-1/2" open-grip) full length, both sides of 15' MXR body $ For SS Walkway (3-1/2" open grip) full length both sides (ADD) per foot of Body $ Tarp/Tie Rail (3/4" Rerod) full length both sides (ADD) per foot of Carbon Body $ Tarp/Tie Rail (2" Flatbar) full length both sides (ADD) per foot of Carbon Body $ Tarp/Tie Rail (2" Flatbar) full length both sides (ADD) per/ft of Stainless Steel Body $ Stow-A-Way Access ladder, w/ steps above (ea) MX body series only $ Fold-A-Way Access ladder (CARBON STEEL) (ea) $ Fold-A-Way Access ladder (STAINLESSSTEEL) (ea) $ Double Link Harware on for Upper Tailgate Hinge (ADD) per Carbon Body $ Double Link Harware on for Upper Tailgate Hinge (ADD) per Stainless Steel Body $ Two Turnbuckle Latches Installed (Positive tailgate Latch System) $ P/N# Lights & Light Packages PRICE Dbl Face Turn Lights w/steel protectors (cabshield sides) $ Whelen Amber Wing Strobe Super LED TIR3 w/20' HD TPR Installed $ Whelen Amber Wing Strobe Super LED LINZ6 w/20' HD TPR Installed $ WHELEN PACKAGE / J-CRAFT (DOT3405D) warning light system 405, consisting $3, of:(2) Micro Lamp with 60 TPR Cable, 400 Series Rear Lightheads with Stainless Steel boxes with side TIR3 (ADD4TIR3). Rear lights include (2) ar 400 Amber, (2) LED Back Up, and (2) LED BTT. Includes DOT-LED Flasher/Junction box and install kit. - Installed WHELEN PACKAGE / J-CRAFT (DOT3505D) warning light system 505, consisting $3, of:(2) Micro Lamp with 60 TPR Cable, 500 Series Rear Lightheads with Stainless Steel boxes. Rear lights include (2) ar 500 Amber, (2) LED Back Up, and (2) LED BTT. Includes DOT-LED Flasher/Junction box and install kit. - Installed WHELEN PACKAGE / J-CRAFT (DOT3705D) warning light system 705, consisting of:(2) Micro Lamp with 60 TPR Cable, 700 Series Rear Lightheads with Stainless Steel boxes with side TIR3 (ADD4TIR3). Rear lights include (2) ar 700 Amber, (2) LED Back Up, and (2) LED BTT. Includes DOT-LED Flasher/Junction box and install kit. - Installed $3,350.00
3 WHELEN PACKAGE /J-CRAFT (DOT3410D) warning light system 410, consisting $3, of:(2) STAINLESS STEEL Micro Lamp with 60 TPR Cable, 400 Series Rear Lightheads with Stainless Steel boxes with side TIR3 (ADD4TIR3). Rear lights include (2) ar 400 Amber, (2) LED Back Up, and (2) LED BTT. Includes DOT-LED Flasher/Junction box and install kit. - Installed WHELEN PACKAGE / J-CRAFT (DOT3510D) warning light system 510, consisting $3, of:(2) STAINLESS STEE Micro Lamp with 60 TPR Cable, 500 Series Rear Lightheads with Stainless Steel boxes. Rear lights include (2) ar 500 Amber, (2) LED Back Up, and (2) LED BTT. Includes DOT-LED Flasher/Junction box and install kit. - Installed WHELEN PACKAGE / J-CRAFT (DOT3710D) warning light system 710, consisting $3, of:(2) STAINLESS STEE Micro Lamp with 60 TPR Cable, 700 Series Rear Lightheads with Stainless Steel boxes with side TIR3 (ADD7TIR3). Rear lights include (2) ar 700 Amber, (2) LED Back Up, and (2) LED BTT. Includes DOT-LED Flasher/Junction box and install kit. - Installed Whelen DOT3 System 404 rear warning lights in D housings (removable w/body) for $1, hooklift system. DOT3404D- 400 Series Rear Lightheads with Stainless Steel boxes Rear lights include (2) ar 400 Amber, (2) LED Back Up, and (2) LED BTT. Includes DOT-LED Flasher/Junction box and install kit. - Installed Whelen DOT3 System 704 rear warning lights in D housings (removable w/body) for $1, hooklift system. DOT3704D- 700 Series Rear Lightheads with Stainless Steel boxes Rear lights include (2) ar 700 Amber, (2) LED Back Up, and (2) LED BTT. Includes DOT-LED Flasher/Junction box and install kit. - Installed Whelen DOT-3 system 402-D (3 strobe) pkg, installed (SS-360 front strobe; Strobe- $2, LED BTT-LED Backup rears) DOT3402D- (1) L31 Remote LED Beacon with 60 TPR Cable, 400 Series Rear Lightheads with Stainless Steel boxes. Rear lights include (2) ar 400 Amber, (2) LED Back Up, and (2) LED BTT. Includes DOT-LED Flasher/Junction box and install kit. - Installed Whelen DOT-3 system 702-D (3 strobe) pkg, installed (SS-360 front strobe; Strobe- $2, LED BTT-LED Backup rears) DOT3702D - (1) L31 Remote LED Beacon with 60 TPR Cable, 700 Series Rear Lightheads with Stainless Steel boxes. Rear lights include (2) ar 700 Amber, (2) LED Back Up, and (2) LED BTT. Includes DOT-LED Flasher/Junction box and install kit. - Installed Whelen DOT-3 system 406-D (4 strobe) pkg, installed (SS-360 front strobes; Strobe- $3, LED BTT-LED Backup rears) DOT3406D- (2) L31 Remote LED Beacon with 60 TPR Cable, 400 Series Rear Lightheads with Stainless Steel boxes. Rear lights include (2) ar 400 Amber, (2) LED Back Up, and (2) LED BTT. Includes DOT-LED Flasher/Junction box and install kit - Installed Whelen DOT-3 system 706-D (4 strobe) pkg, installed (SS-360 front strobes; Strobe- $2, LED BTT-LED Backup rears) DOT3706D- (2) L31 Remote LED Beacon with 60 TPR Cable, 700 Series Rear Lightheads with Stainless Steel boxes. Rear lights include (2) ar 700 Amber, (2) LED Back Up, and (2) LED BTT. Includes DOT-LED Flasher/Junction box and install kit - Installed Whelen DOT-3 system 109 (2 strobe) pkg, installed (Micro Edge front strobes) - $2, DOT (2) STAINLESS STEEL Micro Edges with 60 TPR. Includes DOT-LED Flasher/Junction box and install kit - Installed Whelen DOT-3 system 108 (2 strobe) pkg, installed (Micro Edge front strobes) - $2, DOT (2) Micro Edges with 60 TPR. Includes DOT-LED Flasher/Junction box and install kit - Installed Whelen Class 1 system (4 strobe) pkg, installed (2 Class 1 beacon front strobes and 2 $ Class 1 5G rubber mounted strobes) Micro edge brush guards (Pair) - Installed $ Brush Guard for L10 Series Whelen Beacon Style Lights (Pair) - Installed $ WHELEN - (1) LED AMBER STROBE - L10HPA - Installed (Beacon Style) $ WHELEN - (2) LED AMBER STROBE - L10HPA - Cabshield mounted each side with $ aluminum brackets, Installed. (Beacon Style) Replace OEM round triple tail lights with square single lights FREIGHTLINER ONLY $ Fog lights (clear) installed $305.00
4 Fog lights (Amber) installed $ Plow light selector switch & relay Installed $ Plow light selector switch & relay Installed Freightliner $ Mirror mounted Snowplow light package (S.S. brackets) AEM Lights $ Hood mounted Snowplow light package (Alum crossbar) AEM Lights $ Mirror mounted MEYER NIGHT SABER light package (S.S. brackets) $ Hood mounted MEYER NIGHT SABER light package (Alum crossbar) $ Mirror mounted 81091/2 Hamsar-HOH light package (S.S. brackets) $ Hood mounted 81091/2 Hamsar-HOH light package (Alum crossbar) $ Adjustable Hood mounted Snowplow light package (Alum crossbar) AEM Lights $ Adjustable Hood mounted Snowplow light package (Alum crossbar) Installed MEYER $ NIGHT SABER Lights Adjustable Hood mounted Snowplow light package (Alum crossbar) 81091/2 Hamsar- $ HOH Lights Installed Roof mounted Snowplow lights (Alum Crossbar) Installed. (Note: Applicable on $ trucks with drip rails only!) Accessory LED work light with disconnect (WHELEN SPOT P36SLCHG) $ Accessory LED work light with disconnect (WHELEN FLOOD P46SLCHG) $ Accessory LED work light with disconnect $ Accessory LED work light with out disconnect $ HAMSAR # XWL-800-w/ Hybrid Lens Lumens Installed $ HAMSAR #81281/HO - HOH Hybrid Lens Lumens Installed $ HAMSAR # XWL-800AW/10 White LED/8 Amber LED Warning Light/Hybrid $ Lens Installed 3.26 WHELEN 5G Series LED Amber Oval Strobes (QTY 2 EACH) INSTALLED $ AMBER STROBE LIGHT SYSTEM PKG 4 OVAL-LED INS $ AMBER STROBE LIGHT SYSTEM PKG-2 OVAL-LED INS $ P/N# Fenders PRICE Fenders, Minimizer, model MIN100B SGL AXLE black (2pc) Poly fender set, Installed $ Fenders, Minimizer, model MIN2260B SGL AXLE black (1pc) Poly fender set, Installed $ Fenders, Minimizer, model MIN4000B TDM AXLE black Poly fender set, Installed $1, Fenders, Minimizer,I model MIN4000B TDM AXLE black Poly fender set, Installed for $1, TUFF TRACK SUSP Fenders, Minimizer,I model MIN1500/1554B TDM AXLE black Poly fender set, $1, Installed Fenders, Minimizer, model MIN1500/1554B TDM AXLE black Poly fender set, $1, Installed for TUFF TRACK SUSP Fenders, TDM axle Nat'l Fleet Poly fender set, full radius style, lightweight & flexible, $1, Installed Fenders, SINGLE axle Pro-Tech Aluminum Diamond Plate Finish fender set, Half Cirle $ Style, Installed Fenders, TANDEM axle Pro-Tech Aluminum Diamond Plate Finish fender set, full $1, tandem double radius style, Installed Fenders, SINGLE axle Pro-Tech Staniless Steel Finish fender set, full radius style, $1, Installed Fenders, TANDEM axle Pro-Tech Staniless Steel Finish fender set, full tandem double $2, radius style, Installed P/N# Tarps PRICE SGL & TDM AXLE PulltarpTM model S-9 Supershield tarp system w/a2f tarp, sideflaps $1, & tiedowns (manually deployed), Installed SGL & TDM AXLE Rollrite Semi-Auto Tarp System (Window Shade Type) $ Installed SGL & TDM AXLE Rollrite 6296/8300 tarp system (manually deployed), installed $ SGL & TDM AXLE Rollrite Electric Tarp System Asphalt Type, Installed $2, SGL & TDM AXLE Rollrite Electric Tarp System w/double Amrs, Asphalt Type, $2, Installed
5 SGL AXLE AEROTM EZ-Cover model 575 WEIGHTED electric tarp mechanism, $1, w/alum side arms, & weighted Asphalt type tarp, Installed TANDEM AXLE AEROTM EZ-Cover model 575 WEIGHTED electric tarp mechanism, $2, w/alum side arms, & weighted Asphalt type tarp, Installed TARP AEROTM Crank-N-Go 3 model electric tarp mechanism, w/bow set, front $3, aluminum cap assy, and Asphalt type tarp, Installed TARP AEROTM Crank-N-Go 3 model manual tarp mechanism, w/bow set, front $2, aluminum cap assy, and Asphalt type tarp, Installed SGL & TDM AERO EZ-Pull System, Powder Coated Steel Housing w/a2f tarp, $1, sideflaps & tiedowns (manually deployed) w/pull rope, Installed SHUR-CO - Shur-Trak II Cable Tarp Installed (12ft-15ft) $2, SHUR-CO - Shur-Trak II Cable Tarp Installed (15ft-18ft) $3, SGL & TDM AXLE SHUR-CO - Electric Arm-Matic Flip Tarp System, w/alum side arms, $1, external springsinstalled SHUR-CO - DuraPull Manual Tarp System 96" wide, Galvanized Steel Tarp Housing, $ Spring Loaded Tarp Spool, Aluminum Mounting Strips, Standard Tarp Guide and SHUR-CO - Turbo Tarp2 w/pull Bar Assy, Manual Tarp System, Adjustable width 60" - $ ", Tarp Locking Cab-Level Crank, Machined UHMW End Caps, Aluminum Roller SHUR-CO - Turbo Tarp2, Manual Tarp System, Adjustable width 60" - 104", Tarp $ Locking Cab-Level Crank, Machined UHMW End Caps, Aluminum Roller Bar w/tarp SHUR-CO - Super Duty Shur-Lok, Manual Tarp System, Side to Side with Shur-Flex $1, Crank Arm, Vinyl Type Tarp, and Aluminum Front Cap with Rear Fixed Vinyl Cap SHUR-CO -Direct Drive Motor - 12V SHIP OUT (Replacement motor) $ EXT Dump Box electric tarps (22 oz. tarp), Installed $2, SHUR-CO - Spring Trap Hold Down Installed $ SHUR-CO - Spring Trap Hold Down - SHIP OUT ONLY $ Pioneer Tension Hoop Installed $ Pioneer Tension Hoop Installed - SHIP OUT ONLY $ Removable Pull Tarp Parts - Steel Body $ Removable Pull Tarp Parts - Stainless Steel Body $ Removable Arm Tarp Parts - Steel Body $ Removable Arm Tarp Parts - Stainless Steel Body $ P/N# Tool Box PRICE PRO-TECH 18"x 18" x 24" Diamond Plate or Polished finish, Single Door Drop, Rubber $ Seal, Lanyards to hold door Installed PRO-TECH 18"x 18" x 30" Diamond Plate or Polished finish, Single Door Drop, Rubber $ Seal, Lanyards to hold door Installed PRO-TECH 18"x 18" x 36" Diamond Plate or Polished finish, Single Door Drop, Rubber $ Seal, Lanyards to hold door Installed PRO-TECH 18"x 18" x 48" Diamond Plate or Polished finish, Single Door Drop, Rubber $ Seal, Lanyards to hold door Installed PRO-TECH 18"x 18" x 60" Diamond Plate or Polished finish, Single Door Drop, Rubber $ Seal, Lanyards to hold door Installed PRO-TECH 22"Tx 20"D x 12"L Diamond Plate, Polished or Mil finish tool box Installed $ (no step) PRO-TECH 12"Tx 12"D x 18"L Diamond Plate, Polished or Mil finish tool box Installed $ PRO-TECH 14"Tx 12"D x 24"L Diamond Plate, Polished or Mil finish tool box Installed $ PRO-TECH 12"Tx 12"D x 18"L Steel, Powder Coated finish tool box Installed $ P/N# Pre-Wet Kits PRICE LDS-TG075-EGF Tailgate mount for all dump bodies. 75 gallon tank, STEEL mtg hardware, plumbing, & Electric Gravity Feed Valve system, installed $2, LDS-TG075-EGF Tailgate mount for all STEEL dump bodies. 75 gallon tank, STEEL mtg hardware, plumbing, & Electric Gravity Feed Valve system. (SHIPOUT) $1, LDS-TG075-EGF Tailgate mount for all STEEL dump bodies. 75 gallon tank, STAINLESS STEEL mtg hardware, plumbing, & Electric Gravity Feed Valve system, installed $3, LDS-TG075-EGF Tailgate mount for all STEEL dump bodies. 75 gallon tank, STAINLESS STEEL mtg hardware, plumbing, & Electric Gravity Feed Valve system. (SHIPOUT) $2,723.00
6 LDS-TG100-EGF Tailgate mount for all dump bodies. 100 gallon tank, STEEL mtg hardware, plumbing, & Electric Gravity Feed Valve system, installed LDS-TG100-EGF Tailgate mount for all dump bodies. 100 gallon tank, STEEL mtg hardware, plumbing, & Electric Gravity Feed Valve system. (SHIPOUT) LDS-TG100-EGF Tailgate mount for all dump bodies. 100 gallon tank, STAINLESS STEEL mtg hardware, plumbing, & Electric Gravity Feed Valve system, installed LDS-TG100-EGF Tailgate mount for all dump bodies. 100 gallon tank, STAINLESS STEEL mtg hardware, plumbing, & Electric Gravity Feed Valve system. (SHIPOUT) LDS-TG150-EGF-JC Tailgate mount for all dump bodies. 150 gallon tank, STEEL mtg hardware, plumbing, & Electric Gravity Feed Valve system, installed LDS-TG150-EGF-JC Tailgate mount for all dump bodies. 150 gallon tank, STEEL mtg hardware, plumbing, & Electric Gravity Feed Valve system. (SHIPOUT) LDS-TG150-EGF-JC Tailgate mount for all dump bodies. 150 gallon tank, STAINLESS STEEL mtg hardware, plumbing, & Electric Gravity Feed Valve system, installed LDS-TG150-EGF-JC Tailgate mount for all dump bodies. 150 gallon tank, STAINLESS STEEL mtg hardware, plumbing, & Electric Gravity Feed Valve system. (SHIPOUT) PRE-WET UPCHARGE to go with Electric Pump IN LIEU of the standard Gravity Feed on all TG Systems Installed PRE-WET UPCHARGE to go with Hydraulic Pump IN LIEU of the standard Gravity Feed on all TG Systems Installed LDS-JCR-190-EGF Side of Body mount for Elliptical Dump body only. (2) 95 gallon tanks, mtg hardware, plumbing, Electric Gravity Feed valve, and wiring, installed LDS-JCR-190-HCL Side of Body mount for Elliptical Dump body only. (2) 95 gallon tanks, mtg hardware, plumbing, Hydraulic closed loop Regulated pump, and plumbing, installed LDS-JCR-110-EGF Side of Body mount for Elliptical Dump body only. (2) 55 gallon tanks, mtg hardware, plumbing, Electric Gravity Feed valve, and wiring, installed LDS-JCR-110-HCL Side of Body mount for Elliptical Dump body only. (2) 55 gallon tanks, mtg hardware, plumbing, Hydraulic closed loop Regulated pump, and plumbing, installed LDS-JCR-200-EGF Side of Body mount for Elliptical Dump body only. (2) 100 gallon tanks, mtg hardware, plumbing, Electric Gravity Feed valve, and wiring, installed LDS-JCR-200-HCL Side of Body mount for Elliptical Dump body only. (2) 100 gallon tanks, mtg hardware, plumbing, Hydraulic closed loop Regulated pump, and wiring, installed LDS-JCR-120-EGF Side of Body mount for Elliptical Dump body only. (2) 60 gallon tanks, mtg hardware, plumbing, Electric Gravity Feed valve, and wiring, installed LDS-JCR-120-EM Side of Body mount for Elliptical Dump body only. (2) 60 gallon tanks, mtg hardware, plumbing, Electric Manually Regulated pump, and wiring, installed $2, $1, $3, $2, $2, $1, $3, $3, $ $1, $3, $4, $2, $4, $3, $4, $2, $3, LDS-JCR-120-HCL Side of Body mount for Elliptical Dump body only. (2) 60 gallon tanks, mtg hardware, plumbing, Hydraulic closed loop Regulated pump, and wiring, $4, installed VARITECH Hyd Closed Loop Power Unit SHIP OUT $1, VARITECH - 20 AMP PWM Driver $ Prewet Rinse Tank Kit (3 Gallon Rinse Tank w/3/4" manual valve & 10' of 3/4" hose) - Installed $ Manual override switch Installed $ Steel Single axle pre wet body brackets installed $ Steel Tandem axle pre wet body brackets installed $ P/N# Paint Options PRICE Shot Blast entire exterior of body & understructure, Seam Sealing of all Understructure Welds, Polyurethane Primer, with Polyurethane Top Coat Painted 1 Color Single Axle with undercoated understructure between longsills only. $1,605.00
7 Shot Blast entire exterior of body & understructure, Seam Sealing of all Understructure Welds, Polyurethane Primer, with Polyurethane Top Coat Painted 1 Color Tandem Axle with undercoated understructure between longsills only. $1, Painted Black Understructure IN LIEU of Standard (add per foot of body) $ J-Craft Z-Coat Paint Process Single Axle Body (Add) $1, J-Craft Z-Coat Paint Process Tandem Axle Body (Add) $1, J-Craft Z-Coat/Rock Guard Underbody & Seam Sealed Understructure Single Axle Body (Add) $ J-Craft Z-Coat/Rock Guard Underbody & Seam Sealed Understructure Tandem Axle Body (Add) $ Frame Paint Black after Equipments Installed $ Paint Truck Hood Flat Black $ X Exterior of Dump Body Only Single Axle $2, X Exterior of Dump Body Only Tandem Axle $2, P/N# Cameras PRICE TV-205A-Series Night Vision Camera System with 5.0" LCD Monitor Installed. $ TV-505A-Series Night Vision Camera System with 7.0" LCD Monitor Installed. $ TV-250 PRO Series 2.5" Camera Light with 5.0" LCD Color Monitor Installed. $ TV-550 PRO Series 2.5" Camera Light with 7.0" LCD Color Monitor Installed. $ PC-1207-WEDGE Series Night Vision Camera KIT - Black [2.8mm] Installed. $ PC-1110-VLI Series Night Vision Camera KIT (Includes: Camera and 10m AV Cable) Installed. $ PC-1107-VLS Series Night Vision Camera KIT - Black (Includes: Camera, Housing and 10m AV Cable) Installed. $ DELIVERY CHARGES - SEE SPECIAL TERMS AND CONDITIONS NO FLAT RATE ALLOWED Cost per loaded mile for pickup and or delivery of vehicle (if applicable): Cost per loaded mile for delivery $2.00 VENDOR: J-Craft Inc CONTACT PERSON: Don Gorny, Brandon Oachs or Shane Bretzman ADDRESS: Ember Road lake Crystal Mn PHONE NO TOLL FREE: FAX NO ADDRESS: dgorny@tbei.com, boachs@tbei.com, or sbretzman@tbei.com
8 List truck type box fits Box style PRICE SCHEDULE 1.0 Box Box Make and Model VENDOR TO PROVIDE FOLLOWING DETAIL J-CRAFT model - ULTRA-MD Single Axle & Tandem Square, Western Crossmemberless Width & length of box 96" wide O.D. Side panel description Front panel description Floor description Corner post description Under structure description Tailgate description Hinge Description Description of peripheral items (lights, access steps, etc.) Is installation included in price? Is box painted? 10 ga Gr-50 outer panel, 7 ga Gr-50 inner panel, fully boxed top rails, horizontally braced, w/sloped self cleaning rubrails. 7 ga Gr-50 construction, contoured to body shape, reinforced top rail, with center 1/4"" thick Hardox Material, approx 95" wide. 7 ga 201 STAINLESS steel, full depth, located at rear of body. 1/4" SS Rear Apron and latching hardware structural I-BEAM longsills (no 7 ga Gr-50 main panel, 10 ga GR-50 reinforcings. 1-1/4" dia top & bottom pins, Airtrip linkage standard. Upper gate hinges constructed of 1" thick steel, supported by dual 1/2" ears FMVSS-108 approved (rubber grommet mounted) L.E.D. clearance lights, wiring harness, and L.E.D. cluster of 3 included. Airtrip tailgate, Rear mudflaps included. Yes or No X_ Yes or No X_ Warranty Info 24 Months from "in service" date Air operated tailgate latch Price: (Included in body price) Box Vibrator - Cougar DC 3200 Price: $ List options for box, such as cab shield lights, prewet tanks, tarp covers, etc. Number items starting with 1.3 and use as many as needed.
9 P/N# Bodies w/ Board Pockets Price ' 100ULTRAMD -LR $6, ' 100ULTRAMD -1821/RC $7, '6" 106ULTRAMD-LR $7, '6" 106ULTRAMD-1821/RC $7, ' 110ULTRAMD-1821/RC $7, ' 120ULTRAMD-1821/CS $7,722 P/N# Bodies With Struck Sides Price ' 100ULTRAMD-LR $6, ' 100ULTRAMD-1821/RC $7, '6" 106ULTRAMD-LR $7, '6" 106ULTRAMD-1821/RC $7, ' 110ULTRAMD-1821/RC $7, ' 120ULTRAMD-1821/CS $7,678 P/N# Bodies w/ Board Pockets Price ' 130ULTRAMD-M/CS $8, ' 130ULTRAMD-2824/RC $8, '6" 136ULTRAMD-M/CS $8, '6" 136ULTRAMD-2824/RC $8, ' 140ULTRAMD-M/CS $8, ' 140ULTRAMD-2824/RC $9, '6" 146ULTRAMD-M/CS $8, '6" 146ULTRAMD-2824/RC $8, ' 150ULTRAMD-M/CS $9, ' 150ULTRAMD-2824/RC $9,301 P/N# Bodies With Struck Sides Price ' 130ULTRAMD-M/CS $8,501
10 ' 130ULTRAMD-2824/RC $8, '6" 136ULTRAMD-M/CS $8, '6" 136ULTRAMD-2824/RC $8, ' 140ULTRAMD-M/CS $8, ' 140ULTRAMD-2824/RC $9, '6" 146ULTRAMD-M/CS $8, '6" 146ULTRAMD-2824/RC $8, ' 150ULTRAMD-M/CS $8, ' 150ULTRAMD-2824/RC $9, Adder for each 1/2 Ft in body length over 15' $ Adder OR Deduct per 2" of side OR tailgate height added $ Adder OR Deduct per 2" of side and tailgate height (Struck $ Installation of Vibrator $ Installation of Air Trip $ Installation Price Include all Parts & Labor Price: $1,100 Cost per loaded mile for pickup and or delivery of vehicle (if applicable): Cost per loaded mile for delivery $2.00 VENDOR: J-Craft Inc CONTACT PERSON: Don Gorny, Brandon Oachs or Shane Bretzman ADDRESS: Ember Road lake Crystal Mn PHONE NO TOLL FREE: FAX NO ADDRESS: or
11 List truck type box fits Box style PRICE SCHEDULE 1.0 Box Box Make and Model VENDOR TO PROVIDE FOLLOWING DETAIL J-CRAFT model - ULTRA-MDR Single & Tandem Axle Elliptical Crossmemberless. Width & length of box 96" wide O.D. Side panel description Front panel description Floor description Corner post description Under structure description Tailgate description Hinge Description Description of peripheral items (lights, access steps, etc.) Is installation included in price? Is box painted? Warranty Info Air operated tailgate latch Price: 7 ga Gr-50 construction, 18" lower radius, fully boxed top rails, w/2" board pockets standard. 7 ga Gr-50 construction, contoured to body shape, reinforced top rail, with center reinforcing. 1/4"" thick Hardox Material, approx 95" wide. 7 ga 201 STAINLESS steel, full depth, located at rear of body. 1/4" SS Rear Apron and latching hardware structural I-BEAM longsills (no crossmembers) 7 ga Gr-50 main panel, 10 ga GR-50 reinforcings. 1-1/4" dia top & bottom pins, Airtrip linkage standard. Upper gate hinges constructed of 1" thick steel, supported by dual 1/2" ears FMVSS-108 approved (rubber grommet mounted) L.E.D. clearance lights, wiring harness, and L.E.D. cluster of 3 included. Airtrip tailgate, Rear mudflaps included. Yes or No X Yes or No X 24 Months from "in service" date (Included in body price) Box Vibrator - Cougar DC 3200 Price: $ List options for box, such as cab shield lights, prewet tanks,
12 tarp covers, etc. Number items starting with 1.3 and use as many as needed. P/N# Bodies w/ Board Pockets Price ' 100ULTRAMDR-LR $6, ' 100ULTRAMDR-1821/RC $6, '6" 106ULTRAMDR-LR $6, '6" 106ULTRAMDR-1821/RC $7, ' 110ULTRAMDR-1821/RC $7, ' 120ULTRAMDR CS $7,714 P/N# Bodies With Struck Sides Price ' 100ULTRAMDR-LR $6, ' 100ULTRAMDR-1821/RC $6, '6" 106ULTRAMDR-LR $6, '6" 106ULTRAMDR-1821/RC $6, ' 110ULTRAMDR-1821/RC $7, ' 120ULTRAMDR-1821/CS $7,376 P/N# Bodies w/ Board Pockets Price ' 130ULTRAMDR-M/CS $8, ' 130ULTRAMDR-2824/RC $8, '6" 136ULTRAMDR-M/CS $8, '6" 136ULTRAMDR-2824/RC $8, ' 140ULTRAMDR-M/CS $8, ' 140ULTRAMDR-2824/RC $8, '6" 146ULTRAMDR-M/CS $8, '6" 146ULTRAMDR-2824/RC $8, ' 150ULTRAMDR-M/CS $8, ' 150ULTRAMDR-2824/RC $8,973 P/N# Bodies With Struck Sides Price
13 ' 130ULTRAMDR-M/CS $8, ' 130ULTRAMDR-2824/RC $8, '6" 136ULTRAMDR-M/CS $8, '6" 136ULTRAMDR-2824/RC $8, ' 140ULTRAMDR-M/CS $8, ' 140ULTRAMDR-2824/RC $8, '6" 146ULTRAMDR-M/CS $8, '6" 146ULTRAMDR-2824/RC $9, ' 150ULTRAMDR-M/CS $9, ' 150ULTRAMDR-2824/RC $9, Adder for each 1/2 Ft in body length over 15' $ Adder OR Deduct per 2" of side OR tailgate height added $ Adder OR Deduct per 2" of side and tailgate height (Struck S $ Installation of Vibrator $ Installation of Air Trip $ Installation Price Include all Parts & Labor Price: $1,100 Cost per loaded mile for pickup and or delivery of vehicle (if applicable): Cost per loaded mile for delivery $2.00 VENDOR: J-Craft Inc CONTACT PERSON: Don Gorny, Brandon Oachs or Shane Bretzman ADDRESS: Ember Road lake Crystal Mn PHONE NO TOLL FREE: FAX NO ADDRESS: dgorny@tbei.com, boachs@tbei.com, or sbretzman@tbei.com
14 List truck type box fits Box style PRICE SCHEDULE 1.0 Box Box Make and Model VENDOR TO PROVIDE FOLLOWING DETAIL J-CRAFT model - ULTRA-MX Single & Tandem Axle Square, Western Crossmemberless Width & length of box 96" wide O.D. Side panel description Front panel description 10 ga Gr-50 outer panel, 3/16" Hardox inner panel, fully boxed top rails, horizontally braced, w/sloped self 3/16" Hardox construction, reinforced top lip, with reinforcings at 1/3 points. Floor description 1/4"" thick Hardox Material, approx 95" Corner post description Under structure description Tailgate description Hinge Description Description of peripheral items (lights, access steps, etc.) Is installation included in price? Is box painted? 7 ga 201 STAINLESS steel, full depth, located at rear of body. 1/4" SS Rear Apron and latching hardware structural I-BEAM longsills (no 3/16" Hardox main panel, 10 ga GR-50 reinforcings. 1-1/4" dia top & bottom pins, Airtrip linkage standard. Upper gate hinges constructed of 1" thick steel, supported by dual 1/2" ears FMVSS-108 approved (rubber grommet mounted) L.E.D. clearance lights, wiring harness, and L.E.D. cluster of 3 included. Airtrip tailgate, Rear Yes or No X_ Yes or No X_ Warranty Info 24 Months from "in service" date Air operated tailgate latch Price: (Included in body price) Box Vibrator - Cougar DC 3200 Price: $ List options for box, such as cab shield lights, prewet tarp covers, etc. Number items starting with 1.3 and use as as needed. P/N# Bodies w/ Board Pockets Price
15 ' 100ULTRAMX -LR $7, ' 100ULTRAMX -1821/RC $7, '6" 106ULTRAMX-LR $8, '6" 106ULTRAMX-1821/RC $8, ' 110ULTRAMX-1821/RC $8, ' 120ULTRAMX-CS $8,713 P/N# Bodies With Struck Sides Price ' 100ULTRAMX-LR $7, ' 100ULTRAMX-1821/RC $7, '6" 106ULTRAMX-LR $7, '6" 106ULTRAMX-1821/RC $8, ' 110ULTRAMX-1821/RC $8, ' 120ULTRAMX-CS $8,732 P/N# Bodies w/ Board Pockets Price ' 130ULTRAMX-M/CS $9, ' 130ULTRAMX-2824/RC $9, '6" 136ULTRAMX-M/CS $9, '6" 136ULTRAMX-2824/RC $9, ' 140ULTRAMX-M/CS $9, ' 140ULTRAMX-2824/RC $10, '6" 146ULTRAMX-M/CS $10, '6" 146ULTRAMX-2824/RC $9, ' 150ULTRAMX-M/CS $10, ' 150ULTRAMX-2824/RC $10,361 P/N# Bodies With Struck Sides Price ' 130ULTRAMX-M/CS $9, ' 130ULTRAMX-2824/RC $9, '6" 136ULTRAMX-M/CS $9,852
16 '6" 136ULTRAMX-2824/RC $9, ' 140ULTRAMX-M/CS $10, ' 140ULTRAMX-2824/RC $10, '6" 146ULTRAMX-M/CS $10, '6" 146ULTRAMX-2824/RC $10, ' 150ULTRAMX-M/CS $10, ' 150ULTRAMX-2824/RC $10, Adder for each 1/2 Ft in body length over 15' $ Adder OR Deduct per 2" of side OR tailgate height added $ Adder OR Deduct per 2" of side and tailgate height (Struck $ Installation of Vibrator $ Installation of Air Trip $ Installation Price Include all Parts & Labor Price: $1,100 Cost per loaded mile for pickup and or delivery of vehicle (if Cost per loaded mile for delivery $2.00 VENDOR: J-Craft Inc Shane Bretzman ADDRESS: Ember Road lake Crystal Mn FAX NO ADDRESS: or
17 List truck type box fits Box style PRICE SCHEDULE 1.0 Box Box Make and Model VENDOR TO PROVIDE FOLLOWING DETAIL J-CRAFT model - ULTRA-MXR Single & Tandem Axle Elliptical Crossmemberless. Width & length of box 96" wide O.D. Side panel description Front panel description 3/16" Hardox construction, 18" lower radius, fully boxed top rails, w/2" board 3/16" Hardox construction contoured to body, reinforced top rail, with reinforcings Floor description 1/4"" thick Hardox Material, approx 95" Corner post description Under structure description Tailgate description Hinge Description Description of peripheral items (lights, access steps, etc.) Is installation included in price? Is box painted? Warranty Info Air operated tailgate latch Price: 7 ga 201 STAINLESS steel, full depth, located at rear of body. 1/4" SS Rear Apron and latching hardware structural I-BEAM longsills (no 3/16" Hardox main panel, 10 ga GR-50 reinforcings. 1-1/2" dia top & 1-1/4" bottom pins, Airtrip linkage standard. Upper gate hinges constructed of 1" thick steel, supported by dual 1/2" ears FMVSS-108 approved (rubber grommet mounted) L.E.D. clearance lights, wiring harness, and L.E.D. cluster of 3 included. Airtrip tailgate, Rear mudflaps included. Yes or No X_ Yes or No X_ 24 Months from "in service" date (Included in body price) Box Vibrator - Cougar DC 3200 Price: $ List options for box, such as cab shield lights, prewet tarp covers, etc. Number items starting with 1.3 and use as as needed. P/N# Bodies w/ Board Pockets Price ' 100ULTRAMXR-LR $7,428
18 ' 100ULTRAMXR-1821/RC $7, '6" 106ULTRAMXR-LR $7, '6" 106ULTRAMXR-1821/RC $7, ' 110ULTRAMXR-1821/RC $8, ' 120ULTRAMXR-CS $8,177 P/N# Bodies With Struck Sides Price ' 100ULTRAMXR-LR $7, ' 100ULTRAMXR-1821/RC $7, '6"106ULTRAMXR-LR $7, '6"106ULTRAMXR-1821/RC $7, ' 110ULTRAMXR-1821/RC $7, ' 120ULTRAMXR-CS $8,638 P/N# Bodies w/ Board Pockets Price ' 130ULTRAMXR-M/CS $9, ' 130ULTRAMXR-2824/RC $9, '6" 136ULTRAMXR-M/CS $9, '6" 136ULTRAMXR-2824/RC $9, ' 140ULTRAMXR-M/CS $9, ' 140ULTRAMXR-2824/RC $10, '6" 146ULTRAMXR-M/CS $9, '6" 146ULTRAMXR-2824/RC $10, ULTRAMXR-M/CS $10, ' 150ULTRAMXR-2824/RC $10,181 P/N# Bodies With Struck Sides Price ' 130ULTRAMXR-M/CS $9, ' 130ULTRAMXR-2824/RC $9, '6" 136ULTRAMXR-M/CS $9, '6" 136ULTRAMXR-2824/RC $9,231
19 ' 140ULTRAMXR-M/CS $9, ' 140ULTRAMXR-2824/RC $9, '6" 146ULTRAMXR-M/CS $9, '6" 146ULTRAMXR-2824/RC $9, ULTRAMXR-M/CS $9, ' 150ULTRAMXR-2824/RC $9, Adder for each 1/2 Ft in body length over 15' $ Adder OR Deduct per 2" of side OR tailgate height added $ Adder OR Deduct per 2" of side and tailgate height (Struck $ Installation of Vibrator $ Installation of Air Trip $ Installation Price Include all Parts & Labor Price: $1,100 Cost per loaded mile for pickup and or delivery of vehicle (if Cost per loaded mile for delivery $2.00 VENDOR: J-Craft Inc Bretzman ADDRESS: Ember Road lake Crystal Mn FAX NO ADDRESS: or
20 PRICE SCHEDULE 1.0 Box Box Make and Model Steel VENDOR TO PROVIDE FOLLOWING DETAIL List truck type box fits Box style Single & Tandem Axle Square, Western Crossmemberless Width & length of box 96" wide O.D. Side panel description Front panel description 7 GA 201 STAINLESS STEEL panel, fully boxed top rails, horizontally braced, w/sloped self cleaning rubrails. 7 GA 201 STAINLESS STEEL construction, reinforced top lip, with Floor description 1/4" thick Hardox Material, approx 95" Corner post description Under structure description Tailgate description Hinge Description Description of peripheral items (lights, access steps, etc.) Is installation included in price? Is box painted? Warranty Info Air operated tailgate latch Price: 7 ga 201 STAINLESS steel, full depth, located at rear of body. 1/4" SS Rear Apron and latching hardware structural I-BEAM longsills (no 3/16" AR Inner panel 7 ga 201 Outter STAINLESS steel construction. 1-1/4" dia top & bottom pins, Airtrip linkage Upper gate hinges constructed of 1" thick steel, supported by dual 1/2" ears FMVSS-108 approved (rubber grommet mounted) L.E.D. clearance lights, wiring harness, and L.E.D. cluster of 3 included. Airtrip tailgate, Rear mudflaps included. Yes or No X_ Yes or No X_ 24 Months from "in service" date (Included in body price) Box Vibrator - Cougar DC 3200 Price: $ List options for box, such as cab shield lights, prewet tarp covers, etc. Number items starting with 1.3 and use as as needed. P/N# Bodies w/ Board Pockets Price ' 100ULTRASS-LR $10,284
21 ' 100ULTRASS-1821/RC $10, '6" 106ULTRASS-LR $10, '6" 106ULTRASS-1821/RC $10, ' 110ULTRASS-1821/RC $10, ' 120ULTRASS-LR $11, ' 120ULTRASS-CS $12,248 P/N# Bodies With Struck Sides Price ' 100ULTRASS-LR $10, ' 100ULTRASS-1821/RC $10, '6"106ULTRASS-LR $10, '6"106ULTRASS-1821/RC $11, ' 110ULTRASS-1821/RC $11, ULTRASS-LR $11, ' 120ULTRASS-CS $12,349 P/N# Bodies w/ Board Pockets Price ' 130ULTRASS-CS $13, ' 130ULTRASS-2824/RC $13, '6" 136ULTRASS-CS $13, '6" 136ULTRASS-2824/RC $14, ' 140ULTRASS-CS $14, ' 140ULTRASS-2824/RC $14, '6" 146ULTRASS-CS $14, '6" 146ULTRASS-2824/RC $14, PRICE $14, PRICE $14,704 P/N# Bodies With Struck Sides Price ' 130ULTRASS-CS $14, ' 130ULTRASS-2824/RC $14,194
22 '6" 136ULTRASS-CS $14, '6" 136ULTRASS-2824/RC $14, ' 140ULTRASS-CS $14, ' 140ULTRASS-2824/RC $14, '6" 146ULTRASS-CS $14, '6" 146ULTRASS-2824/RC $14, ULTRASS-CS $14, ' 150ULTRASS-2824/RC $14, Adder for each 1/2 Ft in body length over 15' $ Adder OR Deduct per 2" of side OR tailgate height added $ Adder OR Deduct per 2" of side and tailgate height (Struck $ Installation of Vibrator $ Installation of Air Trip $ Installation Price Include all Parts & Labor Price: $1,100 Cost per loaded mile for pickup and or delivery of vehicle (if Cost per loaded mile for delivery $2.00 VENDOR: J-Craft Inc Bretzman ADDRESS: Ember Road lake Crystal Mn FAX NO ADDRESS: or
23 PRICE SCHEDULE 1.0 Box Box Make and Model Steel VENDOR TO PROVIDE FOLLOWING DETAIL List truck type box fits Box style Single & Tandem Axle Elliptical, Crossmemberless Width & length of box 96" wide O.D. Side panel description Front panel description 7 GA 201 Stainless steel construction, 18" lower radius, fully boxed top rails, w/board pockets standard 7 GA 201 STAINLESS STEEL construction, reinforced top lip, with Floor description 1/4" thick Hardox Material, approx 95" Corner post description Under structure description Tailgate description Hinge Description Description of peripheral items (lights, access steps, etc.) Is installation included in price? Is box painted? Warranty Info Air operated tailgate latch Price: 7 ga 201 STAINLESS steel, full depth, located at rear of body. 1/4" SS Rear Apron and latching hardware structural I-BEAM longsills (no 3/16" AR Inner panel 7 ga 201 Outter STAINLESS steel construction. 1-1/4" dia top & bottom pins, Airtrip linkage Upper gate hinges constructed of 1" thick steel, supported by dual 1/2" ears FMVSS-108 approved (rubber grommet mounted) L.E.D. clearance lights, wiring harness, and L.E.D. cluster of 3 included. Airtrip tailgate, Rear mudflaps included. Yes or No X_ Yes or No X_ 24 Months from "in service" date (Included in body price) Box Vibrator - Cougar DC 3200 Price: $ List options for box, such as cab shield lights, prewet tarp covers, etc. Number items starting with 1.3 and use as as needed. P/N# Bodies w/ Board Pockets Price ' 100ULTRASSR-LR $10,598
24 ' 100ULTRASSR-1821/RC $10, '6" 106ULTRASSR-LR $10, '6" 106ULTRASSR-1821/RC $10, ' 110ULTRASSR-1821/RC $10, ' 120ULTRASSR-LR $11, ' 120ULTRASSR-CS $12,034 P/N# Bodies With Struck Sides Price ' 100ULTRASSR-LR $10, ' 100ULTRASSR-1821/RC $10, '6"106ULTRASSR-LR $10, '6"106ULTRASSR-1821/RC $10, ' 110ULTRASSR-1821/RC $10, ' 120ULTRASSR-LR $11, ' 120ULTRASSR-CS $12,079 P/N# Bodies w/ Board Pockets Price ' 130ULTRASSR-M/CS $12, ' 130ULTRASSR-2824/RC $13, '6" 136ULTRASSR-M/CS $13, '6" 136ULTRASSR-2824/RC $13, ' 140ULTRASSR-M/CS $13, ' 140ULTRASSR-2824/RC $13, '6" 146ULTRASSR-M/CS $14, '6" 146ULTRASSR-2824/RC $13, PRICE $14, PRICE $14,150 P/N# Bodies With Struck Sides Price ' 130ULTRASSR-M/CS $13, ' 130ULTRASSR-2824/RC $12,611
25 '6" 136ULTRASSR-M/CS $13, '6" 136ULTRASSR-2824/RC $12, ' 140ULTRASSR-M/CS $13, ' 140ULTRASSR-2824/RC $12, '6" 146ULTRASSR-M/CS $13, '6" 146ULTRASSR-2824/RC $13, ' 150ULTRASSR-M/CS $14, ' 150ULTRASSR-2824/RC $13, Adder for each 1/2 Ft in body length over 15' $ Adder OR Deduct per 2" of side OR tailgate height added $ Adder OR Deduct per 2" of side and tailgate height (Struck $ Installation of Vibrator $ Installation of Air Trip $ Installation Price Include all Parts & Labor Price: $1,100 DELIVERY CHARGES - SEE SPECIAL TERMS AND NO FLAT RATE ALLOWED Cost per loaded mile for pickup and or delivery of vehicle (if Cost per loaded mile for delivery $2.00 VENDOR: J-Craft Inc Bretzman ADDRESS: Ember Road lake Crystal Mn FAX NO ADDRESS: dgorny@tbei.com, boachs@tbei.com, or sbretzman@tbei.com
Addendum #4 PRICE SCHEDULE 1.0 VENDOR PROVIDED INFORMATION
Addendum #4 PRICE SCHEDULE 1.0 BOX OPTIONS VENDOR PROVIDED INFORMATION Misc 2.27 1312120 Gatesaver Hyd Tailgate Insert Installed $2,760.00 2.31 1650355 Frame End cap W/OEM Stop-Tail-Turn Light mounts (Required
More informationPRICE SCHEDULE 1.0. SGL OR TDM AXLE 2" x 10" Black POLY BANG-BOARDS, fitted to body and $445.00
PRICE SCHEDULE 1.0 BOX OPTIONS R PROVIDED INFORM Line Item P/N# Misc PRICE 1.001 1320522 Gatesaver Hyd Tailgate Insert Installed $2,760.00 1.002 1650355 Frame End cap W/OEM Stop-Tail-Turn Light mounts
More informationForce America pump, Force/Parker MCV- ISO Add-A-Fold Valve. Hydraulics - Make and Model
SCHEDULE 9.0 Hydraulics Hydraulics - Make and Model Cab controls description Sander control description Pump drive description Pump type Valve description Number and type functions Type of valve actuation
More information** Following is a list of all distributors that are authorized to sell the contract equipment listed in the above solicitation.
SWIFT EVENT TITLE & NUMBER: TRAILERS (T-603.5) ** Following is a list of all distributors that are authorized to sell the contract equipment listed in the above solicitation. ** SWIFT Vendor Numbers: Provide
More informationFOLLOWING DETAIL. Under tailgate Center line discharge Installation of Sander PRICE See Attached Schedule 8.0-1
PRICE SCHEDULE 8.0 Sander VENDOR TO PROVIDE FOLLOWING DETAIL Sander - Make and Model Type of sander Warranty Info Falls 1ASD Tailgate 6 & 9" Sanders (Stainless Steel) Under tailgate Center line discharge
More information** Following is a list of all distributors that are authorized to sell the contract equipment listed in the above solicitation.
SWIFT EVENT TITLE & NUMBER: TRAILERS (T-603.5) ** Following is a list of all distributors that are authorized to sell the contract equipment listed in the above solicitation. ** SWIFT Vendor Numbers: Provide
More informationConcord Road Equipment Mfg., Inc. NorEast-R. Severe Duty Combination Dump Body Spreader with Flat Floor and Integral Center Conveyor
Body Lengths Standard available body lengths (inside of headsheet to inside of tailgate) are 9ft, 10ft, 11ft, 13ft, and 15ft; special sizes are available upon request Understructure Construction Longitudinal
More informationSTATE OF MINNESOTA PRICING PAGE Dump Bodies
STATE OF MINNESOTA PRICING PAGE Vendor Name: Truck Utilities Inc Contact Person: Paul Warner Street Address: 2370 English Street P.O. Box: City, State, Zip St Paul, MN 55109 Phone #: 651-393-2274 Toll
More informationVan Bodies Contract end Date
Van Bodies Contract end Date 09-30-18 Vendor Name: Contact Person: Street Address: P.O. Box: City, State, Zip Phone #: Toll Free #: Fax #: Email Address: Website: Aspen Equipment Co Mark Lundeen 9150 Pillsbury
More informationALLEGAN COUNTY ROAD COMMISSION SPECIFICATION FOR BIDS
ALLEGAN COUNTY ROAD COMMISSION SPECIFICATION FOR BIDS PROPOSAL FOR DUMP BOX BODIES, V BOX SPREADERS, UNDER BODY SCRAPERS, PLOW WINGS, FABRICATION AND ASSEMBLY OF COUNTY DUMP TRUCKS Board of County Road
More informationSTATE OF MINNESOTA PRICING Page % DISCOUNT
TRAILERS: DUMP BODY, LOWBOYS, FLATBED, TAG, SLIDE AXLE, UTILITY, GOOSENECK, ENCLOSED, ETC. Vendor Name: Truck Utilities Inc Contact Person: Paul Warner Street Address: 2370 English Street P.O. Box: City,
More informationRUGGED CONSTRUCTION SUPERIOR DESIGN IN TRUCK BODY FABRICATION
RUGGED CONSTRUCTION SUPERIOR DESIGN IN TRUCK BODY FABRICATION A DIVISION OF PB9600 STANDARD PLATFORM/ STAKE BODIES SHOWN EQUIPPED WITH 12' Body with Optional Wood Floor Triple Window in Bulkhead Stake
More informationELIMINATOR Dump bodies
ELIMINATOR Dump bodies & HR SERIES HOISTS www.rugbymfg.com Eliminator Rugby MFG Built Better The Rugby Way Rugby Manufacturing is the world s leading designer and manufacturer of Class 3-5 dump bodies,
More informationWinning Bidder. Monroe Truck Equipment
Bid results for purchase and delivery of Two (2) QuadAxle Plow Equipment Packages-2018 To be installed by Waupaca County Winning Bidder Monroe Truck Equipment Dump Body: 17' 6" inside length x 84" inside
More informationSTATE OF MINNESOTA PRICING PAGE
Vendor Name: Stonebrooke Equipment, Inc. Contact Person: Loren Holman or Customer Service Street Address: 14311 Ewing Avenue P.O. Box: City, State, Zip Burnsville, MN 55306 Phone #: (952) 224-4440 Toll
More informationSNOW PLOW, FRAME, HYDRAULIC SYSTEM, DUMP BODY, WING, SPREADER AND PRE-WET TANK SYSTEM
DEKALB COUNTY HIGHWAY DEPARTMENT SNOW PLOW, FRAME, HYDRAULIC SYSTEM, DUMP BODY, WING, SPREADER AND PRE-WET TANK SYSTEM Sealed proposal for the furnishing and installing of snow plow, frame, hydraulic system,
More informationJLG UTILITY VEHICLES
JLG UTILITY VEHICLES 1 MORE MATERIALS. MORE PEOPLE. ONLY IN YOUR JLG UTV. With a rugged design, heavy-duty drive system and class-leading cargo capacity, JLG utility vehicles outlast the competition and
More informationCity of New Haven. 101 FRONT STREET PO BOX 236 NEW HAVEN, MO Phone * * Fax
City of New Haven 101 FRONT STREET PO BOX 236 NEW HAVEN, MO 63068 Phone 573-237-2349 * www.newhavenmo.org * Fax 573-237-4696 August 20, 2014 Request for Bids, Medium Duty Truck City of New Haven The City
More informationHale Trailer Brake & Wheel
Hale Trailer Brake & Wheel 062290 Design Type: FRAMELESS DUMP TRAILER BODY SPECIFICATIONS Genesis Design - INBOARD Length: 32'-0" Width: 96" Overall Side Height: 66" (64"+2") Aluminum Height: 64" Top Rail
More informationWinning Bid Meets Specifications Meets Specifications Yes/No Deviations Yes/No Deviations
Minimum Specifications/Questionnaire Bid Result for One (1) Purchase and Installation of Tandem Axle Plow Equipment Monroe Truck Equipment Winning Bid DUMP BODY: General: 14 inside length x 84 inside width
More informationELIMINATOR LP DUMP BODIES & HR SERIES HOISTS
www.rugbymfg.com ELIMINATOR LP DUMP BODIES & HR SERIES HOISTS RUGBY MFG BUILT BETTER THE RUGBY WAY THE RUGBY ELIMINATOR LP The Rugby Eliminator LP is the hardest working dump body in the landscape and
More informationSPECIFICATIONS FOR TRUCK EQUIPPED WITH AERIAL LIFT AND SERVICE BODY Pennsylvania Department of Military and Veteran Affairs
Page 1 of 5 SPECIFICATIONS FOR TRUCK EQUIPPED WITH AERIAL LIFT AND SERVICE BODY Pennsylvania Department of Military and Veteran Affairs Insulated Telescopic Articulating type aerial lift with the following
More informationOUR TRUCKS OFF-ROAD FUEL/LUBE TRUCKS MECHANICS TRUCKS... 3 LIGHT DUTY SERVICE BODY TRUCKS... 5 VACUUM TRUCKS LIGHT DUTY DUMP TRUCKS...
OUR TRUCKS During the past 85 years, we have grown into one of America s largest manufacturers and dealers of commercial service vehicles. We deliver internationally, with sales and service provided throughout
More information8.0 NON-MnDOT PRICE SCHEDULE SANDER. Falls 1ASD Tailgate 6 & 9" Sanders 1.0 (Stainless Steel) TOTAL PRICE: See Attached Schedule 8.
Price quote for: 8.0 NON-MnDOT PRICE SCHEDULE SANDER Vendor Name: Contact Person: Street Address: P.O. Box: City, State, Zip: Phone #: Toll Free #: Fax #: Email Address: Bert's Truck Equipment of Moorhead,
More informationTRAILERS: DUMP BODY, LOWBOYS, FLATBED, TAG, SLIDE AXLE, UTIL. Vendor Name: Central Trailer Sales, Inc. P.O. Box: Toll Free #: n/a Fax #:
TRAILERS: DUMP BODY, LOWBOYS, FLATBED, TAG, SLIDE AXLE, UTIL Vendor Name: Central Trailer Sales, Inc. Contact Person: Brian Renstrom Street Address: 18661 Hwy 65 P.O. Box: City, State, Zip East Bethel,
More information1ASD-6CDSS-6P-1D-2S-LM "Salt Special" sander, dual spinner, w/unidirectional reversible auger, includes extra salt shields (Per Ea)
PRICE SCHEDULE 8.0 TO PROVIDE - Make and Model FALLS 1ASD-6 Stainless Steel Under tailgate type, 6" dia (carbon steel) 6" pitch, single auger, direct hydraulic drive, LH Discharge w/poly self-leveling
More informationCost per loaded mile for delivery of hydraulics $
PRICE SCHEDULE 9.0 Hydraulics Hydraulics - Make and Model Cab controls description Sander control description Pump drive description Pump type Valve description Number and type functions Type of valve
More informationPiston type, load sensing, 4.67 cu. in. with 1" shut off valve (pump model FASD34L LS)
Hydraulics - Make and Model Cab controls description Sander control description Pump drive description Pump type Valve description Number and type functions Type of valve actuation Reservoir size Fluid
More informationSTATE OF MINNESOTA PRICING PAGE. Dump Bodies. Warranty Date & I.D. of Price List Discount to be applied to Price List (see note below)
Dump Bodies Contract end Date 09-30-18 Vendor Name: TOWMASTER Contact Person: Tim Erickson, Tom Gertgen, or Jerry Valiant Street Address: 61381 US HWY 12 P.O. Box: City, State, Zip LITCHFIELD, MN 55355
More informationSTATE OF MINNESOTA PRICING Page % DISCOUNT
STATE OF MINNESOTA PRICING Page % DISCOUNT Contract end Date March 1, 2018 TRAILERS: DUMP BODY, LOWBOYS, FLATBED, TAG, SLIDE AXLE, UTILITY, GOOSENECK, ENCLOSED, ETC. Vendor Name: Truck Utilities Inc Contact
More informationSTATE OF MINNESOTA PRICING Page % DISCOUNT
STATE OF MINNESOTA PRICING Page % DISCOUNT TRAILERS: DUMP BODY, LOWBOYS, FLATBED, TAG, SLIDE AXLE, UTILITY, GOOSENECK, ENCLOSED, ETC. Vendor Name: Ziegler Inc. Contact Person: Mark Phillippi, Tim Hoeft
More informationLine Body Canopy and Accessories:
ATTACHMENT A Heavy Crew Truck Line Body and Accessories Installation. TMWA provided cab & chassis specifications are provided on last page The Cab & Chassis will be a Freightliner (All Other Items Referenced
More informationPage 1. Equipment: RSP Moldboard Only Serial # RSP RSP Qty: 2. Equipment: OWP Serial # OWP Qty: 1
NON STOCK INVENTORY The following units are currently in stock and discounted for immediate delivery. All units are new, unless otherwise stated and sold AS IS. Standard manufacturer s warranty on pumps,
More informationTrailer Parts. Brake Components. Axle Components. Suspensions. Lights & Electrical. Wheels & Tires. Loading Ramps. Couplers & Safety Chains
Trailer Parts Brake Components Axle Components Suspensions Lights & Electrical Wheels & Tires Loading Ramps Couplers & Safety Chains Trailer Jacks Fenders Dump Trailer Parts Tilt SST Parts Decal Kits Brake
More informationEBY TRUCK BODY PARTS LIST
EBY TRUCK BODY PARTS LIST REVISED: 8/25/2017 TABLE OF CONTENTS EBY TRUCK BODY PARTS LIST 2016 BODY MOUNTING KITS 2 BULKHEADS AND POCKETS 13 BUMPERS AND HITCHES 18 CASTINGS 22 ELECTRICAL 23 FRAME COVERS
More informationIndicates Winning Bid
Bid results for purchase and delivery of Two (2) Tandem Axle Plow Equipment Packages To be installed by Waupaca County Indicates Winning Bid Monroe Truck Equipment Dump Body: 14' 6" inside length x 84"
More informationS STATE OF MINNESOTA PRICE PAGES S-843(5)
Vendor Name: MacQueen Equipment, Inc. Contact Person: Dan Gage Street Address: 595 Aldine Street P.O. Box: City, State, Zip St. Paul, MN 55104 Phone #: 651.645.5726 Toll Free #: 800.832.6417 Fax #: 651.645.6668
More informationnot shown Rubber Seal - Sliding Glass not shown Aluminum Strip, Holds
Weatherstripping Ref # Description Qty Part # Atlantic British has researched various modern materials available and is offering a NEW Weatherstripping product as an excellent and costeffective alternative
More informationNORTH CAROLINA SHERIFFS ASSOCIATION
NORTH CAROLINA SHERIFFS ASSOCIATION Name of Dealership Type of Vehicle Zone LOADMASTER EXCEL "S" REAR LOADER - 31 YARD (Specification #76) Base Unit Price 2016 Loadmaster Excel "S" Rear Loader - 31 Yard
More informationNORTH CAROLINA SHERIFFS ASSOCIATION
NORTH CAROLINA SHERIFFS ASSOCIATION Name of Dealership Type of Vehicle Zone LOADMASTER EXCEL "S" REAR LOADER - 20 YARD (Specification #73) Base Unit Price 2016 Loadmaster Excel "S" Rear Loader - 20 Yard
More informationTrailer Parts. Brake Components. Axle Components. Suspensions. Lights & Electrical. Wheels & Tires. Loading Ramps. Couplers & Safety Chains
Trailer Parts Brake Components Axle Components Suspensions Lights & Electrical Wheels & Tires Loading Ramps Couplers & Safety Chains Trailer Jacks Fenders Dump Trailer Parts Tilt SST Parts Decal Kits Brake
More informationTC2000. This control box is typically located in the cab of the truck and the cable runs back to the auxiliary plug at the front of the trailer.
ELECTRICAL TC2000 Part No: 3500128 Air Ride Control Box With 30 ft. Cable This control box is typically located in the cab of the truck and the cable runs back to the auxiliary reverse ground plug at the
More informationService Bodies. 9 Brutus BL48S Steel Service Body. For an 60 CA light duty chassis. Brutus Body Features. Body length step bumper
9 Brutus BL48S Steel Service Body For an 60 CA light duty chassis Brutus Body Features Body length 108 + 7 step bumper Body width 96 Cabinet height 48 Cabinet depth 24 Cabinet drop None Cabinets 12 gauge
More informationand Original Series Pickup Lift Mounting Instructions Fullsize Chevy & GMC Trucks: 1500 & 2500 LD HD & 3500HD BOLT-ON GUSSET
r ve and Original Series Pickup Lift Mounting Instructions Fullsize Chevy & GMC Trucks: 1500 & 2500 LD 1999-2007 2500HD & 3500HD 2000-2007 Preparing the Gate 1. Remove the mounting hardware which is banded
More informationRemount Proposal. Everest Emergency Vehicles 1133 Rankin Street St Paul, MN Eric Olson
Remount Proposal Customer Dealer Everest Emergency Vehicles 1133 Rankin Street St Paul, MN 55116 651-236-8943 Eric Olson Module: INFORMATION 0.1.60 ****** Ambulance Re-chassis / Refurbish ****** * * Old
More informationEast Manufacturing Corporation
East Manufacturing Corporation www.eastmfg.com Volume revised 0/ ef EAST HARDWARE TABLE OF CONTENTS CATEGORY PAGE NO ALUMINUM TAILGATE HARDWARE 3 HOIST & ALUM. BULKHEAD HARDWARE 7 BODY HARDWARE 8 HARDWARE
More information22956 Hwy 61 PO Box 295 Morley, MO Phone: Fax: MODOT 04/17/17
-GENERAL SERVICES FLEET SECTION TP260000 Viking TP 26, 26' Tow Plow with swivel tongue, (1) 12' moldboard and (1) 14', base angles drilled for carbide edges (no cutting edges included), 10 gauge steel
More informationSteel Product Line. teel Product Line. Built to Heavy-Duty Standards. RUGGED DURABLE DEPENDABLE versatile. versatile Legendary quality and durability
Steel Product Line Built to Heavy-Duty Standards teel Product Line Steel Landscaper Body Platform Body Stake Body RUGGED DURABLE DEPENDABLE versatile versatile Legendary quality and durability il The Rugged
More informationSpec 330/ December 2012 STATE OF MINNESOTA EQUIPMENT SPECIFICATION
Page 1 of 21 Spec 330/350-612 December 2012 STATE OF MINNESOTA EQUIPMENT SPECIFICATION INTRODUCTION The State of Minnesota, Department of Transportation (MNDOT), owns a fleet of over 800 snow plow trucks
More informationYour ONE STOP Dump Body Manufacturer
Please select the features in the order they appear to insure the accuracy of the design. Fax Completed Form to 450-835-7304. Your request will be transfer to a dealer near of your country. Company Name:
More informationPrice per loaded mile for delivery $ 2.25 Delivery Time Frame in calendar days ARO
Flatbeds Contract end Date 09-30-18 Vendor Name: Contact Person: Street Address: P.O. Box: City, State, Zip Phone #: Toll Free #: Fax #: Email Address: Website: Bert's Truck Equipment, Inc Jim McLaughlin
More informationTRAIL KING HYDRAULIC DETACHABLE GOOSENECK TRAILER TK120HDG
TRAIL KING HYDRAULIC DETACHABLE GOOSENECK TRAILER TK12HDG TK12HDG Hydraulic Detachable; 22' deck STANDARD EQUIPMENT 3-27, lb. axles (3/4" wall) 16 1/2" x 7" air Brakes 8.25 x 22.5 disc wheels Outboard
More informationSK2100. This valve operates the gates and is equipped with a manual over ride. This valve is normally closed.
SK2100 Air Parts No: 3100097 Air Tank (Medium) Over rear suspension Part No: 3100096 Air Tank (Small) Over rear suspension Part No: 3100231 5 Port 4 Way Gate Valve Rear drivers side This valve operates
More informationDate & I.D. of Price List 6/1/2012 Discount to be applied to Price List* (see note below) 0%
Page 1 of 2 City, State, Zip St. Paul, MN Beau-Roc One (1) Year Use this section to offer hoist options. Number these options starting with 4.1, 4.2, 4.3, etc., until you have listed all hoist options.
More information2018 FULL LINE CATALOG
2018 FULL LINE CATALOG AMERICAN MADE QUALITY INVERTED SKIDSTEER SPLITTERS Heavy duty design and easy to use. Pick up those big logs, split & load them without breaking a sweat! Features: 8 reinforced H
More informationNORTH CAROLINA SHERIFFS ASSOCIATION
NORTH CAROLINA SHERIFFS ASSOCIATION Name of Dealership Type of Vehicle Zone LABRIE AUTOMIZER AUTOMATED SIDELOADER- 20 YD. TTD (Specification #52) Base Unit Price Amick Equipment Co., Inc. 2016 Labrie Automizer
More informationSTR PRO SERIES ROUND TOP CARGO
Wholesale Dealer Smart - Confident - Proven STR PRO SERIES ROUND TOP CARGO STANDARD FEATURES Height Frame Hitch Axle 6 6 Interior Height* 6x2 Tube Frame and Tongue* 16 On-Center Tube Wall Studs* 16 On-Center
More informationEverything You Need! Phone , Ext. 229
Public Works Operations Manager 401 E Third St Kewanee, IL 61443 Everything You Need! Phone 309-852-2611, Ext. 229 Fax 309-856-6001 November 13, 2017 The City of Kewanee is requesting proposals in conformance
More informationDECALS AND SIGNS BODY HARDWARE CONT. PIN STRIPING
WARE WARE DECALS AND SIGNS PIN STRIPING MAC CASTINGS AND DECALS Part No. Component 3/8" Pin Striping 28600300 3/8" Light Blue Pin Stripe Part No. Component MAC Castings 28600301 3/8" Black Pin Stripe 23700006
More informationDump Bodies Version of Excel used: CONTRACTOR BODY Warranty
Dump Bodies Contract end Date 09-30-18 Vendor Name: Contact Person: Street Address: P.O. Box: City, State, Zip Phone #: Toll Free #: Fax #: Email Address: Website: ABM Equipment & Supply, LLC. Sam Fahey
More informationSTATE OF MINNESOTA. 5.0 DUMP BODY SCOTT ALUMINUM Make. LANDSCAPER BODY Warranty. 1 YEAR BODY, DEALER PRICE LIST Date & I.D.
Vendor Name: ABM EQUIPMENT & SUPPLY, LLC. PRICING PAGE Contact Person: RON ZIMMER Street Address: 333 2ND STREET NE P.O. Box: City, State, Zip HOPKINS, MN 55343 Phone #: 952-938-5451 Toll Free #: 800-229-5451
More informationNOTICE OF BID. The City of Pigeon Forge is receiving bids on three trucks for the Public Works Department.
NOTICE OF BID The City of Pigeon Forge is receiving bids on three trucks for the Public Works Department. Specifications may be obtained from the Public Works Department in City Hall between the hours
More informationLitter Spreader. Models SP400, SP450, SP500, SP550. Illustrated Parts Breakdown
Litter Spreader Models SP00, SP0, SP00, SP0 Illustrated Parts Breakdown Page Front End Page Hydraulic System (w/ Side Mounted Reservoir) Page Hydraulic System (w/ Front Mounted Reservoir) Page Hydraulic
More informationNORTH CAROLINA SHERIFFS ASSOCIATION
NORTH CAROLI SHERIFFS ASSOCIATION Name of Dealership Type of Vehicle Zone LABRIE AUTOMIZER AUTOMATED SIDELOADER - 28 YD. FE (Specification #49) Base Unit Price Amick Equipment Co., Inc. 2016 Labrie Automizer
More informationSpec # Information Requested Answer
Price quote for: Engine Driven Brush Chipper File: C796-12082014 Vendor Name: Contact Person: Street Address: City, State, Zip Phone #: Toll Free #: Fax #: Email Address: Tri-State Bobcat, Inc Nick Kentros
More informationDate & I.D. of Price List 5/1/2012 Discount to be applied to Price List* (see note below) 0%
#250-109 STATE OF MINNESOTA PRICING PAGE Page 1 of 1 Vendor Name: Bert's Truck Equipment, Inc Contact Person: Jim McLaughlin Street Address: 3804 Highway 75 North P.O. Box: 336 City, State, Zip Moorhead,
More informationSpecification Sheet Doc Rev
Quote Name Name Shop Order Number Sales Administration Use Only Number-001 Serial Number/s Number Date xx/xx/xxxx CUSTOMER Customer Name SALESPERSON Salesperson Name MODEL Super Sander TM, Pneumatic -
More informationACCEPT ONLY THE BEST
ACCEPT ONLY THE BEST Cab & Chassis The truck shall be supplied by the customer. CET Fire Truck Glider kit #7 Revised January 10 th 2018 The glider kit is made for dual rear wheels truck with a «back-of-cab-to
More informationFour Wheel Drive Commercial Vehicles PCID NO COMMONWEALTH OF PENNSYLVANIA PENNSYLVANIA COMMERCIAL ITEM DESCRIPTION (PCID)
COMMONWEALTH OF PENNSYLVANIA PENNSYLVANIA COMMERCIAL ITEM DESCRIPTION (PCID) Four Wheel Drive Commercial Vehicles (Supersedes PCID 1105 eff. 19 September 19, 2012) PCID NO. 1105 Eff, August 12, 2013 1.
More informationREQUEST FOR QUOTATIONS
Public Works Department REQUEST FOR QUOTATIONS 12 14 YARD DUMP TRUCK PURCHASE Due: Thursday, July 27, 2017 No later than 2:00 P.M. Submit to: City of Arroyo Grande Attn: Public Works Department 1375 Ash
More informationSTATE OF MINNESOTA CONTRACT RELEASE S-863(5), EVENT # SNOW PLOW TRUCK COMPONENTS & ACCESSORIES SPECIFICATIONS
STATE OF MINNESOTA CONTRACT RELEASE S-863(5), EVENT # 2000008082 SNOW PLOW TRUCK COMPONENTS & ACCESSORIES SPECIFICATIONS INTRODUCTION The State of Minnesota, Department of Transportation (MnDOT), owns
More informationINVITATION TO BID ONE (1) 10-FOOT DUMPBODY DUMP TRUCK WITH DIESEL / CNG OPTIONS
P. O. B o x 1 5 4 0 T h o m a s v i l l e, G A 3 1 7 9 9 2 2 9-227- 7 0 0 0 F A X 2 2 9-227- 3 2 4 3 w w w. t h o m a s v i l l e. o r g INVITATION TO BID ONE (1) 10-FOOT DUMPBODY DUMP TRUCK WITH DIESEL
More informationSpec # Information Requested Answer
Price quote for: Engine Driven Brush chipper File: C796-102012 Vendor Name: Contact Person: Street Address: P.O. Box: City, State, Zip Phone #: Toll Free #: Fax #: Email Address: Tri-State Bobcat Patrick
More informationTender Town of Yarmouth Equipment Purchase 5 Ton Single Axle Truck Complete with dump box, slide-in spreader, pre-wet system, and spreader controls.
Tender Town of Yarmouth Equipment Purchase 5 Ton Single Axle Truck Complete with dump box, slide-in spreader, pre-wet system, and spreader controls. General Instructions: 1. All bids must be submitted
More informationROLLBACK CARRIERS INDUSTRIAL FEEL THE POWER OF UNCOMPROMISING STANDARDS, BRILLIANT IDEAS AND EXCLUSIVE TECHNOLOGY. Transporters specifications
Transporters specifications 5 Ton Steel 5 Ton Aluminum 7.5 Ton Steel 10 Ton Steel 15 Ton Steel Deck Cab to Axle Cab to Tandem Capacity 10,000 lbs. 10,000 lbs. 15,000 lbs. 20,000 lbs. 30,000 lbs. Winch
More informationNOTICE OF BID. The City of Pigeon Forge is receiving bids on four trucks for the Public Works Department.
NOTICE OF BID The City of Pigeon Forge is receiving bids on four trucks for the Public Works Department. Specifications may be obtained from the Public Works Department in City Hall between the hours of
More informationRESPONDER'S NAME: SWIFT EVENT TITLE & NUMBER: TRAILERS (T-603)
RESPONDER'S NAME: SWIFT EVENT TITLE & NUMBER: TRAILERS (T-603) ** Following is a list of all distributors that are authorized to sell the equipment listed above. ** The Swift Vendor Number (SWIFT UD) must
More informationSTATE OF MINNESOTA PRICING PAGE. Dump Bodies. Version of Excel used: 2013
Vendor Name: Contact Person: Street Address: P.O. Box: City, State, Zip Phone #: Toll Free #: Fax #: Email Address: Website: Bert's Truck Equipment, Inc Jim McLaughlin 3804 Hwy 75 North 336 Moorhead, MN
More informationSELF DRILL SCREWS FILLER STRIP
r ve Pickup Lift Mounting Instructions Fullsize Ford Trucks- F-150 2015-present Preparing the Gate 1. Remove the mounting hardware which is banded to the liftgate. 2. Verify mounting bracket kit (Figure
More informationGALLATIN PUBLIC UTILITIES
GALLATIN PUBLIC UTILITIES Bid Proposal Item: Single Axle Dump Truck Bid Date: Company Address: Phone Number: Manufacturer: Bid Information (1) Prices F.O.B., 249 Hancock Street, Gallatin, Tennessee 37066.
More information2018 Kenworth T880 Roll-off Trucks
2018 Kenworth T880 Roll-off Trucks Pioneer Tarper Included Only $174,900 Plus F.E.T. 2018 KENWORTH WITH PIONEER RACK N PINION TARP Engine Information ISX Cummins 425 H.P. @ 1800 RPM Paccar MX-13 430 H.P.
More informationCargo Trailer Sales Concession Trailer Price List W 8 th St. Lansdale PA,
Cargo Trailer Sales Concession Trailer Price List 800-220-7913 801 W 8 th St Lansdale PA, 19446 www.cargotrailersales.com Trailer Features; Tube Main Frame Construction 16" O.C. Floor Construction 16"
More informationSIDEWINDER 350 INSTALLATION INSTRUCTIONS & OPERATION MANUAL NOVEMBER 2011
SIDEWINDER 350 INSTALLATION INSTRUCTIONS & OPERATION MANUAL NOVEMBER 2011 PATENT PENDING Donovan Enterprises 3353 SE Gran Park Way, Stuart FL 34997 800-327-8287 www.donovan-ent.com PACKING LIST FOR SIDEWINDER
More informationDry Bulk Super Sander Trailer Specification Sheet
Quote Name: Name Shop Order Number: Sales Administration Use Only 417464-001 Serial Number/s: 700287-700346 Date: Date: xx/xx/xxxx CUSTOMER : Olsta/PneuTech Stock SALESPERSON : MODEL : Super Sander TM,
More informationSpecification Sheet Doc Rev
Quote Name: Name Shop Order Number: Sales Administration Use Only Number-001 Serial Number/s: Number Date: xx/xx/xxxx CUSTOMER : Customer Name SALESPERSON : Salesperson Name MODEL : J&L 1850 Model Vacuum/Pneumatic
More informationHopper and Drive Components
Fisher Engineering 50 Gordon Drive, Rockland, Maine 04841 2139 www.fisherplows.com 78001 1, 78004 1, 78007 1 March 15, 19 Lit. No. 99754, Rev. 06 Hopper and Drive Components POLY CASTER Hopper Spreader
More informationCargo Trailer Sales Concession Trailer Price List W 8 th St. Lansdale PA,
Cargo Trailer Sales Concession Trailer Price List 800-220-7913 801 W 8 th St Lansdale PA, 19446 www.cargotrailersales.com Trailer Features; Tube Main Frame Construction 16" O.C. Floor Construction 16"
More informationPLATFORM BODIES. Platform Bodies. Made in the USA VERSATILE DURABLE RUGGED
PLATFORM BODIES Made in the USA Platform Bodies VERSATILE DURABLE RUGGED Platform Bodies Premium materials, superb craftsmanship, and advanced production techniques make Reading Platform Bodies the preferred
More informationSTATE OF MINNESOTA PRICING Page % DISCOUNT
Vendor Name: NUSS TRUCK & EQUIPMENT Contact Person: BOB PROW Street Address: 2195 WEST COUNTY ROAD C2 P.O. Box: City, State, Zip ROSEVILLE, MN 55113 Phone #: 6516334810 Toll Free #: 8007040935 Fax #: 6516350928
More informationFurnish separate price quote for: BODY COMPONENTS AND ATTACHMENTS FOR 6,000 TO 19,500 GVWR. Stahl Warranty
Vendor Name: Crysteel Truck Equipment Contact Person: Jim Wyatt Street Address: 1130 73rd Ave NE P.O. Box: City, State, Zip Fridley, MN 55432 Phone #: 763-571-1902 Toll Free #: 800-795-1280 Fax #: 763-571-5091
More informationG190 LT-145 (1992) Page 1 of 27 42" Mower Deck
132-736G190 LT-145 (1992) Page 1 of 27 42" Mower Deck 132-736G190 LT-145 (1992) Page 2 of 27 42" Mower Deck 3 17600A 1 S 42" Deck Ass'y. Code: N notates a new part (not previously existing). 813-06119
More informationCONTRACTORS CRYSTEEL SELECT H O I S T OPTIONS MEDIUM & HEAVY DUTY DUMP BODIES R O L L E R C O M B O (UNDERBODY WITH SUBFRAME)
RYSTEEL H A S T H E B O DY FO R YO U H O I S T OPTIONS R O L L E R O M B O (UNDERBODY WITH SUBFRAME) TM A S P H A L T ONTRATORS As an Asphalt contractor you need functionality and versatility in the dump
More informationSTATE OF MINNESOTA PRICING Page % DISCOUNT
Vendor Name: Contact Person: Marc Tietjen Street Address: 12090 Margo Ave S P.O. Box: City, State, Zip Hastings MN 55033 Phone #: 651-438-8780 Toll Free #: Fax #: 651-438-3021 Email Address: Marc@acetrailersales.com
More informationSpec # Information Requested Answer
Price quote for: Engine Driven Brush chipper File: C796-102012 Vendor Name: Contact Person: Street Address: P.O. Box: City, State, Zip Phone #: Toll Free #: Fax #: Email Address: Tri-State Bobcat Patrick
More information1500 GPM CAFS WASP Sheldon Fire & Rescue Houston, TX ESD 60 ESD 60. Darley September 25, 2015 PART NO DESCRIPTION QTY
1500 GPM CAFS WASP Sheldon Fire & Rescue Houston, TX 77044 ESD 60 ESD 60 Darley 3248 September 25, 2015 PART NO DESCRIPTION QTY 00-00-4100 Cover Page 1 00-00-6000 General Info 1 00-01-0000 ---ADMINISTRATION
More informationFASTENERS, SPRINGS, DETENT BALLS & MISC. HARDWARE PAINT, SEALANT, ADHESIVES, DECALS & LEAK DETECTORS
CROSS REFERENCE LANDING LEG PARTS TWISTLOCK & PINLOCK ASSEMBLIES & PARTS STEEL PANELS & STRUCTURAL STEEL ALUMINUM EXTRUSIONS & STRUCTUAL COMPONENTS DOOR HARDWARE AXLES, SUSPENSION PARTS, 5TH WHEEL & COMPONENTS
More information53 TRUCKLOAD TRAILER PARTS BOOK 2013
53 TRUCKLOAD TRAILER PARTS BOOK 2013 CONTENTS A ABS Warning Light Mounting Bracket...58 Air Brake Chamber Assembly...40 Air Brake Hose Assembly.29 Air Brake Hose Mounting Plate Assembly.38 Air Brake Valve
More informationWas Giant- Vac Part # Part # Description BAG- GRASS 15.4X16X22.5 WHITE POLY CLTH OBS HANGER- GRASS BAG HOOP 10GA TWIN -
Was Giant- Vac Part # Part # Description 1703764 484811 BAG- GRASS 15.4X16X22.5 WHITE POLY CLTH OBS 1703807 484880 HANGER- GRASS BAG HOOP 10GA TWIN - PLAIN 1703855 484881 HOOP-.500DIA 16.12X16.75 GRASS
More informationDAVIMAC CHASER BIN PARTS LIST
DAVIMAC CHASER BIN PARTS LIST FROM : CB7 TO CB667 DAVIMAC PTY LTD WELINGTON STREET MOLONG NSW CHASER BIN - RIGHT 9 9 6 0 7 8 9 8 0 000-06 REAR CHAIN BRACKET 00700 AUGER ASSEMBLY 0700 STANDARD AUGER SUPPORT
More informationHopper and Drive Components
Fisher Engineering 50 Gordon Drive, Rockland, Maine 04841 213 www.fisherplows.com 8001 1, 8004 1, 800 1 January 1, 201 Lit. No. 54, Rev. 02 Hopper and Drive Components POLY CASTER Hopper Spreader Parts
More information