Tubular Heaters Flanged
|
|
|
- Bonnie Bennett
- 5 years ago
- Views:
Transcription
1 UL and C-UL Recognized-E Features Ratings and sizes other than those listed are available. 150# rating ANSI carbon steel flange. Steel, stainless steel, copper, or incoloy sheathed elements. Optional thermostat and well for temperature control. Element supports in multiple element units for proper element spacing as required. General purpose terminal housing with conduit openings. Optional terminal housings for special applications. 240V and 480V, single or three phase which are factory wired to your requirements. Long, trouble free service. Made in U.S.A. Construction 1 Terminal housing, NEMA 1 general purpose for electrical connections. 2 Standard pipe flange. 3 Tubular heating element. Web: sales@hotwatt.com 93
2 Heater Selection Guide Application Water and Very Mild Solutions Oil Heating* Specialty Heaters Air, Gases, and Steam Heating Solution or Application Alkaline or Acid Content (Est. % by Volume) Sheath Material Clean Water ph6 to ph8 Neutral Copper 45 Process Water or Very Mild Solutions ph5 to ph9 2 3% 45 Mild Solutions 5 6% 45 Demineralized or Deionized Water 45 Low Viscosity Oil Steel 23 Medium Viscosity Oil Steel 15 High Viscosity Oil Steel 6 Small Tanks Process Water Demineralized Water Low Viscosity Oil ph5 ph Pipe Insert 12 Hot Tubs, Spa Treated 100 Commercial Equipment Clean Water Clean Water Low Temperature Stainless Steel 23 High Temperature 23 *The oil heaters on following pages are catalogued based on low viscosity oil. For medium and high viscosity oils, watt densities must be reduced in accordance with the above watt densities. Installation The heater is bolted onto a mating flange which is welded to a tank wall or a pipe. Terminal housings to enclose electrical connections are included. Copper Typical Watt Density (watts/sq. in.) Oil Tank Heater In-Line Fluid or Gas Heater 94 Phone: Fax:
3 Steel Sheath: 150 lb Steel Flange Tubular Heaters 3" Flange: Steel Sheath 6" Flange: Steel Sheath 5" Flange: Steel Sheath 8" Flange: Steel Sheath " BS J " BS J " BS J " BS J " BS J " BS J " BS J " BS J " BS J " BS J " BS J " BS J " BS J " BS J " BS J " BS J " BS6-33-J " BS J " BS6-48-J " BS J " BS J " BS J " BS J " BS J " BS J " BS J " BS J " BS J Web: sales@hotwatt.com 95
4 Stainless Steel Sheath: 150 lb Steel Flange 3" Flange: Stainless Steel Sheath 6" Flange: Stainless Steel Sheath 5" Flange: Stainless Steel Sheath 8" Flange: Stainless Steel Sheath Application: Process Water and Very Mild Solution " BT J " BT J " BT J " BT J " BT J " BT J " BT J " BT J " BT J " BT J Application: Process Water and Very Mild Solution " BT J " BT J " BT J " BT J " BT J " BT J " BT J " BT J Application: Process Water and Very Mild Solution " BT J " BT6-33-J " BT J " BT6-48-J Application: Process Water or Very Mild Solution " BT J " BT J " BT J " BT J " BT J " BT J " BT J Phone: Fax:
5 Copper Sheath: 150 lb Steel Flange Tubular Heaters 3" Flange: Copper Sheath 6" Flange: Copper Sheath 5" Flange: Copper Sheath 8" Flange: Copper Sheath " BC J " BC J " BC J " BC J " BC J " BC J " BC J " BC J " BC J " BC J " BC J " BC J " BC J " BC J " BC J " BC J " BC J " BC J " BC J " BC6-33-J " BC J " BC6-48-J " BC J " BC J " BC J " BC J " BC J " BC J " BC J Web: sales@hotwatt.com 97
6 Sheath: 150 lb Steel Flange 3" Flange: Sheath 6" Flange: Sheath 5" Flange: Sheath 8" Flange: Sheath " BA J " BA J " BA J " BA J " BA J " BA J " BA J " BA J " BA J " BA J " BA J " BA J " BA J " BA J " BA J " BA J " BA J " BA J " BA J " BA6-33-J " BA J " BA6-48-J " BA J " BA J " BA J " BA J " BA J " BA J " BA J Dimensions and enclosed dimensions shown in proceeding tables may vary. 98 Phone: Fax:
7 Special Features SF-13B: Moisture tight/explosion resistant terminal enclosure. Tubular Heaters XS-55: Thermostat control. Integral bulb and capillary control with thermowell. Two temperature ranges available. Specify XS-55 (0º 100ºF) or XS-55 (60º 250ºF). Available on: 3", 5", 6", 8"flanged. Enclosure sizes vary with element sizes. Available on: 3", 5", 6", 8"flanged. Enclosure sizes vary with element size. How To Order Specify: catalog number, wattage, voltage, and special features, if any. Other sizes are available. Consult factory. Example: BS J/1000W120V IN STOCK ITEMS Drum Heaters Direct Immersion Cat. No. Watts Volts DT w 120v DT w 240v 3 1 8" Cord 16-3 SJD Features Designed for direct immersion thru 2 bung opening in 55 gallon drums. 37" " NOM " " Adjustable Postitioning Bracket Assy sheath for long life in most matericals F integral thermostat. Manual reset thermostat protects against overheating. Adjustale mounting bracket. Low watt density (1000w - 120w - 8w watts per square inch) High watt density (4000w - 240v - 32 watts per square inch) for heating water and water based solutions. 18" 19" MAX.440 Alloy Web: sales@hotwatt.com 99
Strip Heaters Mica Insulated
Mica Insulated U.L. Recognized-E56973 C.S.A. Certified 016386-0-000 Applications Dies, Cylinders, Kettles, Molds, Process Machines, Platens, Tanks, or other applications where controlled heating is needed.
Cartridge Heaters CARTRIDGE
Hotwatt manufactures a wide range of cartridge heating units for a variety of applications. This size, sheath, leads, terminals, wattage and voltage can be adapted to your heating requirements. Hotwatt
CIRCULATION HEATERS SPECIFICATIONS DESCRIPTION FEATURES CH & CHP SERIES HEAT EXCHANGE AND TRANSFER, INC. 6 to 480 kw and higher. Flanged construction
SPECIFICATIONS 6 to 480 kw and higher CIRCULATION HEATERS CH & CHP SERIES Flanged construction 208 volt through 575 volt, 3 phase 5 to 40 watts/in 2 and higher NEMA 4/12 Terminal housing DESCRIPTION Type
CIRCULATION HEATERS. Applications: Options:
CIRCULATION HEATERS Options: Compact and efficient, circulation heaters may be used in forced or natural circulation systems to heat flowing gasses or liquids. Pipe plug or Flanged immersion heater, vessel,
Crankcase Heaters CRANKCASE. Features. Applications. Phone: Fax:
The following pages list Hotwatt Crankcase Heaters by the OEM manufacturer, showing both the OEM part number and Hotwatt part number. In addition, custom designed crankcase heaters and variations to the
Tubular and Process Assemblies
On stock chart units: Five to seven working days on all Assembly Stock heaters 10 working days on special voltages and/or wattages 15 working days on special element lengths Circulation heaters provide
Heating Cable. Construction
Mineral Insulated High Temperature A C Constant Wattage Series Resistance Heating Cable Sets Process Temperature Maintenance to F (593 C) Maximum Exposure Temperature 4 F (76 C) (Power Off) Corrosion Resistant
Imperial: 230Vac. Part No SC: Standard, Low to Medium Watt Density, HS: Superwatt, High Watt Density
Cartridge Heaters Imperial: Vac Part No Hawco can offer a wide range of cylindrical stainless steel sheathed cartridge heaters for use up to 680 C, to provide localised heat to restricted work areas requiring
Circulation Heaters. WATROD and FIREBAR Circulation Heaters
irculation Heaters WATROD and FIREAR irculation Heaters irculation heaters provide a ready-made means to install electric heating with a minimal amount of time and labor. This is accomplished by combining
SUBMERSIBLE PUMPS DRAINER SUMP/EFFLUENT
SUBMERSIBLE PUMPS DRAINER SUMP/EFFLUENT LEESON Canada features products by well known manufacturer Berkeley which includes the Toran and Simer brand names. SUBMERSIBLE UTILITY PUMPS GEYSER II 1/6 HP 1/6
Circulation Heaters WATLOW. Circulation Heaters
Max. Operating Typical Max. Temperatures Watt Densities Sheath Materials F W/in 2 W/cm 2 Page STARFLOW 316L stainless steel 1000 537 30 4.6 329 WATROD and FIREAR Alloy 800/840 1600 870 120 18.6 Stainless
CLIMAGUARD Outdoor Heat Exchangers
Product Overview : CLIMAGUARD Outdoor Heat Exchangers TX23 Model TX38 Model TX52 Model 132 Product Overview : Lab- and field-tested to seal out extreme weather CLIMAGUARD Outdoor Heat Exchangers PRODUCT
Tubular and Process Assemblies
Watlow flange heaters are easy to install and maintain. Designed for heating liquids and gases in tanks and pressure vessels, flange immersion heaters are ideal for applications requiring higher kilowatts.
254 Series Convector. Standard Construction Features
American Bureau of Shipping Class I, Divisions and 2, Groups B, C and D Class II, Divisions and 2, Groups E, F and G Class I, Zones and 2, Groups IIB and H2 Applications Battery Storage Areas Chemical
( )
(1-800-492-8826) OVERVIEW Convenient and ready-to-connect, WATTCO control panels include temperature, power, multi-loop, process, and safety limit controllers. Designed for electric heaters, control panels
(770)
(770) 345-0010 OVERVIEW Convenient and ready-to-connect, WATTCO control panels include temperature, power, multi-loop, process, and safety limit controllers. Designed for electric heaters, control panels
Convector. Standard Construction Features
American Bureau of Shipping Class I, Divisions and 2, Groups B, C and D Class II, Divisions and 2, Groups E, F and G Class I, Zones and 2, Groups IIB and H2 Applications Battery Storage Areas Chemical
Strip Heaters W A T L O W. 375 Finned Strip. Strip Heaters
W A T L O W Like its 375 strip counterpart, the 375 finned strip heater is constructed of highly-compacted MgO-based insulation, which conducts heat efficiently from the nickel-chrome element wire to the
Blue Max 2000 Vector Duty 2000:1 Constant Torque Motors
Blue Max 2000 Vector Duty 2000:1 Constant Torque Motors Applications: Blue Max motors are used in variable frequency drive applications requiring full rated torque at zero speed, utilizing Closed- or Open-Loop
Series A DC Link Chokes
Table of Contents TABLE OF CONTENTS...1 STANDARD DELIVERY SCHEDULE...2 INTRODUCTION...3 LIST PRICE / CROSS REFERENCE...4 SELECTION & LIST PRICE...5 208 VOLTS (60 HZ)...5 240 VOLTS (60 HZ)...6 400 VOLTS
Options (available at time of purchase only) Standard features. Project Item # Quantity
Project Item # Glo-Ray Built-In Rectangular Heated Shelves with Recessed Top Models: GRSB-24-F, -I, -O; -30-F, -I, -O; -36-F, -I, -O; -42-F, -I, -O; -48-F, -I, -O; -54-I; -60-F, -I, -O; -66-I; -72-F, -I,
Project Item # Quantity GRSBF-60-O. Options (available at time of purchase only)
Project Item # Glo-Ray Built-In Rectangular Heated Shelves with Flush Top Models: GRSBF-24-F, -I, -S, -O; -30-F, -I, -S, -O; -36-F, -I, -S, -O; -42-F, -I, -S, -O; -48-F, -I, -S, -O; -60-F, -I, -S, -O;
Heating Cable. Construction
MI Mineral Insulated High Temperature A B C Constant Wattage Series Resistance Heating Cable Sets Process Temperature Maintenance to 1112 F (600 C) Maximum Exposure Temperature 1200 F (648 C) (Power Off)
Heating Cable. Description
Single Entry Power Connection Kit NEMA 4X Entry for 1 Cable 3/4 Conduit Hub Opening Lighted or Non-Lighted Multiple Entry Connection Box NEMA 4X Entry for up to 3 Cables Power, Splice or Tee Connection
Electric Actuated Ball Valves 150# Flanged Stainless Steel, Full Port 1/2 to 4 inch Pipe
1/2 to 4 inch Pipe Features Direct mount ISO5211 Full Port stainless steel ball valve 2-piece ANSI Class 150 flanged body 275 PSI working pressure at 100 F (38 C) Highly visual dome style valve position
steel standard SST DUCK components Epoxy Resin Rated Insulation System recognized stainless steel output shaft seal
Premium Efficiency Washguard Motors - Now Available! WASHGUARD MOTORS WASHGUARD MOTORS AVAILABLE IN FIVE STYLES Maximum service in critically clean or corrosive environments PREMIUM WASHGUARD ALL-STAINLESS
GLASS LEVEL GAUGES. Reflex Transparent Bicolour
GLASS LEVEL GAUGES Reflex Transparent Bicolour INDEX Page General Information...3 Types, Material Schedules and Applications...4-5 Reflex Level Gauges type BR14-G11 & GP11...6 type BR12-G11, G12, GP11
Bulletin B Reflex Transparent Bicolour
Bulletin B 06-09 GLASS LEVEL GAUGES Reflex Transparent Bicolour INDEX Page Page General Information...3 Bicolour Level Gauges type BC24, BC28, BC33, BC32 with GP11, GP12, G41, G42, GS41 & GS42...24 type
Heating Cable. Description
203312 Single Entry Connection Box NEMA 4X Entry for 1 Cable 3/4 Conduit Hub Opening Multiple Entry Connection Box NEMA 4X Entry for up to 3 Cables Power or Tee Connection 3/4 Conduit Hub Opening End Seal
SUB-FHP AC GEARMOTORS PARALLEL SHAFT GEARMOTORS
SUB-FHP AC GEARMOTORS PARALLEL SHAFT GEARMOTORS 12-100 In-Lbs Single phase gearmotors, totally enclosed for continuous duty, general purpose applications. Permanent TEFC split capacitor designs are rated
Infinite Thermal Solutions Inc.
Page 51 Pipe Plug & Flange Immesion Heates Tubula heate elements ae bazed o welded in a bass, steel o stainless steel pipe plug o flange plug. Ratings fom 350 watts to 38kw and numeous vaiations and options
High Pressure Solenoid Valves
High Pressure Solenoid Valves Available for Quick Delivery Controls the flow of Gases & Liquids up to 15,000 PSIG Natural Gas, Hydrogen & other High Pressure Gases High Pressure Cryogenics Flammable Liquids
Project Item # Quantity GRSBF-60-O. Options (available at time of purchase only)
Project Item # Glo-Ray Built-In Rectangular Heated Shelves with Flush Top Models: GRSBF-24-F, -I, -S, -O; -30-F, -I, -S, -O; -36-F, -I, -S, -O; -42-F, -I, -S, -O; -48-F, -I, -S, -O; -60-F, -I, -S, -O;
MAX-E1 FAMILY NEMA PREMIUM EFFICIENCY
MAX-E1 FAMILY NEMA PREMIUM EFFICIENCY TYPE AEHE, AEHH8N, AEHH8NCF, AEUH8NDC Effective 05-01-13 Supercedes 08-01-11 APPLICATIONS: Fans & Blowers Compressor Any Severe Duty/ Petro-Chem/ Pumps Mixers Pulp
180VC WITH B5 FLANGE / M ,6 0, / M l 5,0 0,7 192 / M ,0 0,9 223
METRIC (IEC) FRAME THYRISTOR RATED DC METRIC (IEC) FRAME MOTORS IP54 These metric dimensioned motors are built to IEC 34-1 electrical and mechanical standards. The IEC 63 and smaller frames are stocked
Submittal Sheet for Heavy Duty Commercial Electric Water Heaters
Advanced Heating and Hot Water Systems P.O. Box 429 120 Braley Road East Freetown, MA 02717 508-76-8071 Fax: 508-76-769 Submittal Sheet for Heavy Duty Commercial Electric Water Heaters JOB NAME: LOCATION:
MODEL LUBK (Belt Drive) UPBLAST PROPELLER ROOF EXHAUSTERS
UPBLAST PROPELLER FANS Model LUBK SECTION 16 MODEL LUBK (Belt Drive) UPBLAST PROPELLER ROOF EXHAUSTERS Application Model LUBK is a high capacity roof mounted exhauster rated from 3,560 to 42,000 CFM. It
Heating Cable. Description
203312 Single Entry Connection Box NEMA 4X Entry for 1 Cable 3/4 Conduit Hub Opening Multiple Entry Connection Box NEMA 4X Entry for up to 3 Cables Power or Tee Connection 3/4 Conduit Hub Opening End Seal
IMMERSION HEATERS METRIC
IMMERSION HETERS METRIC INDEX Screw plug tubular heaters m45x200 pag. 04-06 Screw plug tubular heaters m77x200 pag. 07-11 with thermowell pag. 12-13 Screw plug tubular heaters 1 1/2 pag. 14 00-03 - 0515
FINNED TUBULAR HEATERS
FINNED TUBULAR HEATERS Applications: DRYERS RECIRCULATION OVENS FAN-FORCED HEATERS HEAT TREATING ANNEALING In applications where tubular heaters are exposed to forced convection, placing fins around tubular
BRASS BALL VALVES. CSA, UL, cul CGA 9.1 and FM Approved. Female NPT, Male NPT and Flare ends in various configurations from 3/8 to 1.0.
195 Series Ball Valves BRASS BALL VALVES CSA, UL, cul CGA 9.1 and FM Approved. Female NPT, Male NPT and Flare ends in various configurations from 3/8 to 1.0. Hot forged brass body Blow-out nickel plated
Portable Mixers MIXER COMPANY CATALOG MC-10. A Division of Neptune Chemical Pump Company
Portable Mixers CATALOG MC-10 MIXER COMPANY A Division of Neptune Chemical Pump Company Introduction / Mixer Selection Portable Mixers from Neptune Mixer Company A Division of Neptune Chemical Pump Company
THREE PHASE MOTORS RIGID BASE GENERAL PURPOSE Rigid Base
THREE PHASE MOTORS DRIP-PROOF RPM 60 HP Hz 1/4 1725 1725 S56 100027 $246 A 16 208-230/460 1.4 58.0 9.24 1/3 3450 48 101447 251 A 14 208-230/460 1.4 68.0 9.00 1725 48 100446 266 A 17 208-230/460 1.6 64.3
Single-Phase Ventilated
Single-Phase Ventilated 1 15 to 1,650 kva Applications n For general loads, including lighting, industrial and commercial applications Specifications n Meets DOE-2016 and C802 standards for energy efficiency
UNITED ELECTRIC 100 Series, Pressure, Vacuum, Diff. Pressure & Temp. Switches Adjustable Ranges 30 Vac to 5000 PSI, -180 to 650 o F
UNITED ELECTRIC 100 Series, Pressure, Vacuum, Diff. Pressure & Temp. Switches Adjustable Ranges 30 Vac to 5000 PSI, -180 to 650 o F DESCRIPTION The 100 Series is a cost-effective pressure and temperature
L Q LIQUID-SPECIFIC PRODUCT LINE: CAST IRON ASPHALT PUMPS SERIES DESCRIPTION (34 & 32E) OPERATING RANGE: MODEL NUMBER KEY:
LIQUID-SPECIFIC PRODUCT LINE: SERIES 4A, 4AE, 44A, 44AE, 34A, 434A, 14E, 34E, 34, 3E Section 430 Page 430.1 Issue S SERIES DESCRIPTION (34 & 3E) Viking 34 Series Asphalt Pumps are designed to handle asphalts,
ELECTROGALVANIZED ALUMINUM ACRYLIC PAINTED FERALOY[R] IRON ALLOY (US), COPPER FREE ALUMINUM (CANADA)
![ELECTROGALVANIZED ALUMINUM ACRYLIC PAINTED FERALOY[R] IRON ALLOY (US), COPPER FREE ALUMINUM (CANADA)](/thumbs/86/93535574.jpg "ELECTROGALVANIZED ALUMINUM ACRYLIC PAINTED FERALOY[R] IRON ALLOY (US), COPPER FREE ALUMINUM (CANADA)")
804 South Street 75964-726, TX Nacogdoches Phone: 96-569-794 Fax: 96-560-4685 EDS25 -Gang Start/Stop Station Cooper Crouse-Hinds Catalog Number Manufacturer Weight per unit Product Category Features Assembly/Kit
DPS. The SSV Dual Pump System
DPS The SSV Dual Pump System A Full Range of Product Features The DPS series of 36L stainless steel vertical multi-stage pumps from G&L has been designed to provide reliable high pressure boosting to serve
Hotset High-Watt Density Cartridge Heaters
Cartridge Heaters hotset High-Watt Density Cartridge Heaters Hotset High-Watt Density Cartridge Heaters proven technology founded on our long term experience with many outstanding advantages. For applications
Comfort. Sewage Treatment Plants. Petrochemical Facilities, Oil Rigs. Unattended Pumping Stations. Chemical Storage and Handling Facilities
3-35 kw 10,200-119,420 Btuh 208 to 600 Volts 1 or 3 Phase Meets NEC, OSHA and UL Requirements ATEX and GOST Models Available Refer to WR-80EP in the Controls section. F-4 Description Type is designed to
ELECTROGALVANIZED ALUMINUM ACRYLIC PAINTED FERALOY IRON ALLOY
EDS2274 Pos D.E. Selector Switch Cooper Crouse-Hinds Catalog Number Manufacturer Description Weight per unit Product Category Features Box Type SINGLE GANG Contact Configuration 4NO-4NC Number of Circuits
ENCAPSULATED TRANSFORMERS FOR HAZARDOUS LOCATIONS
Hammond Power Solutions Inc. Page 1 of 1 ENCAPSULATED TRANSFORMERS FOR HAZARDOUS LOCATIONS HPS Titan has been designed to operate in harsh environments/hazardous locations where dangerous gases, liquids,
PRODUCT: SERIES DESCRIPTION PAGE TRAPS
PRICE SHEET HS-113 Effective January 14, 2013 Replaces Price Sheet HS-112 Dated January 30, 2012 These prices are subject to change without notice. All shipments will be billed at the price in effect at
Electric Actuated 3-Way Ball Valves T-Port Diverter, Stainless Steel, Full Port 1/4 to 2 NPT
T-Port Diverter, Stainless Steel, Full Port 1/4 to 2 NPT Features Full Port direct mount 316 SS ball valve Functions as a diverter valve 1000 PSI working pressure at 100 F (38 C) Visual valve position
Self-operated Temperature Regulators Type 1u Temperature Regulator
Self-operated Temperature Regulators Type 1u Temperature Regulator Version according to ANSI Application Temperature regulators for cooling plants Control thermostats for set points 1) from 15 to 480 F
EDS / EFS Series Control Stations
EDS / EFS Series Fully Assembled EFS and EDS Factory Sealed Devices Cl. I, Div. & 2, Groups B*, C, D Cl. II, Div., Groups E, F, G NEMA, 7B*CD, 9EFG Applications: Factory sealed enclosures are installed
AC Line / Load Reactors
AC Line / Load Reactors Table of Contents Delivery / Lead Time.PB03-1100 -2 Selection & Pricing PB03-1100 -4 Replacement Parts..PB03-1100-8 Product Modifications / Options..PB03-1100 -9 Product Specifications..PB03-1100
15100 VALVES. E. Section Building Automation and Control System Guidelines
15100 VALVES PART 1: GENERAL 1.01 RELATED SECTIONS A. Section 15050 Basic Material and Methods B. Section 15545 Chilled Water System C. Section 15550 Heat Generation D. Section 15790 Coils E. Section 15955
4" Submersible Motors XE-SERIES
4" Submersible Motors XE-SERIES For high-thrust water well applications 1/2 5 HP, Single Phase, 2 & 3 Wire, 115V and 230V, 60 Hz 1/2 10 HP, Three Phase, 3 Wire, 200V, 230V, 460V and 575V, 60 Hz Pentek
Flexible Heaters. Silicone Rubber Heaters
Rugged, yet thin, lightweight and flexible the use of Watlow silicone rubber heaters is limited only by the imagination. With these heaters, heat can be put where it is needed. In the application process
7.0 High HP Low and Medium Voltage
TABLE OF CONTENTS 7.0 High HP Low and 7.1 Quantum LMV - TEFC Low Voltage 7.7 Quantum LMV - TEFC 7.12 449 Frame TEFC 7.16 WPII, TEFC, TEAAC Standard Features 7.17 WPII Pricing and Kits 7.20 Pegasus MHV
Comfort. Description. Applications
Blower Heater 3-35 kw 10,236-119,420 Btuh 208, 240, 480 and 575 Volt 1 or 3 Phase Built-in Controls Description Type is designed to heat areas classified as hazardous locations to provide primary or supplementary
Self-operated Temperature Regulators Type 1u Temperature Regulator
Self-operated Temperature Regulators Type 1u Temperature Regulator ANSI version Application Temperature regulators for cooling installations Control thermostats for set points 1) from 15 to 480 F ( 10
EDS / EFS Series Control Stations
EDS / EFS Series Control Stations Fully Assembled EFS and EDS Factory Sealed Devices Cl. I, Div. & 2, Groups B*, C, D Cl. II, Div., Groups E, F, G NEMA, 7B*CD, 9EFG Applications: Factory sealed enclosures
MYERS MODELS 4V AND 4VX
MYERS MODELS 4V AND 4VX SOLIDS HANDLING WASTEWATER PUMPS STANDARD (4V) AND HAZARDOUS LOCATION (4VX) CONSTRUCTION WWW.FEMYERS.COM MYERS MODELS 4V AND 4VX Solids Handling Wastewater Pumps The Right Choice
THIS MATERIAL IS MEANT TO BE USED ALONG WITH OUR CATALOG IT IS NOT A SUBSTITUTE FOR THE CATALOG
THIS MATERIAL IS MEANT TO BE USED ALONG WITH OUR CATALOG IT IS NOT A SUBSTITUTE FOR THE CATALOG COMPANY OVERVIEW Since 1970, we have been pioneering new developments in heater technology and providing
Engineering Information. Solenoid Valves Principles of Operation. Solenoid Valves. Direct Acting Valves (Figures 1A, 1B)
4 Engineering Information Principles of Operation A solenoid valve is a combination of two basic functional units: A solenoid (electromagnet) with its core A valve body containing one or more orifices
CX1 ProVector Explosion-Proof Heaters
Explosion-Proof Heaters For hazardous locations heating, rely on the for the most dependable, troublefree service available. CCI Thermal Technologies Inc. manufactures explosion-proof air heaters to satisfy
Autoclave Thermocouples (Type 9) and Pt100 Sensors (Type 69)
Autoclave Thermocouples (Type 9) and Pt100 Sensors (Type 69) A range of thermocouple sensors specifically designed to withstand the harsh conditions within autoclaves. Autoclave Load and Drain thermocouples
QUICK REFERENCE Stock Sub-FHP Gearmotors
QUICK REFERENCE Stock Sub-FHP AC Single & Three Phase DC SCR & Low Voltage Parallel Shaft PZ Series Single Phase 115V 12-100 In-Lbs Page 166 DC SCR 90 & 180V 10-100 In-Lbs 36-100 In-Lbs torque Page 156
Gauges and Thermometers
Technical Guide Gauges and Thermometers Pressure Gauges Thermometers Altitude Gauges Sprinkler Gauges Industrial Gauges Logo Gauges Ancillary Equipment Pressure Gauges Pressure gauges in this catalogue
the Interactive Catalog
Interactive Catalog Supplements Catalog PDFs If you need detailed product information, or help choosing the right product for your application, see our Interactive Catalog Use the Interactive Catalog to
HS18 HS18 SERIES CONDENSING UNITS EXPANSION VALVE AIR CONDITIONING SYSTEM. 3.6 to 16.0 kw ( to Btuh) Cooling Capacity ENGINEERING DATA
ENGINEERING DATA ENGINEERING DATA MATCHED CONDENSING REMOTE SYSTEMS UNITS 50hz HS18 SERIES CONDENSING UNITS EXPANSION VALVE AIR CONDITIONING SYSTEM 3.6 to 16.0 kw (12 200 to 54 700 Btuh) HS18 Bulletin
CUSTOM DC MOTORS & GEARMOTORS
& GEARMOTORS Battery-powered, 24-volt motor with close coupled hydraulic pump mounting on one end and standard NEMA 56 C face and shaft on other end. Totally enclosed fan cooled, thyristor rated, partial
Totally Enclosed Non-Ventilated
5 15 to 500 kva 5 Applications n Designed for commercial and industrial loads in challenging environments Specifications n NEMA3R rated enclosure n Single Phase units 15 through 100 kva n Three Phase units
C-L-X Aluminum Sheath Type IEC
COMPACT STRAND CONSTRUCTION C-L-X Aluminum Sheath A B C D E F G H J Conductor - Compact Stranded Copper Strand Screen - Extruded Semiconducting EPR Insulation - Okoguard EPR Insulation Screen - Extruded
BRCP6SM ITT. CentriPro. 6-10" Submersible Motors. For 6" and Larger Deep Well Pumps. Engineered for life
ITT BRCP6SM CentriPro 6-10" Submersible s For 6" and Larger Deep Well Pumps Engineered for life Single Phase, 6" s (1.15 S.F.) and Required Control Boxes Diameter F.L. S.F. Control Box HP kw Volts Order
MTE AC Line / Load Reactors Price book
Table of Contents TABLE OF CONTENTS...1 STANDARD DELIVERY SCHEDULE...2 REACTOR SELECTION & PRICING...4 208-240 VOLT (3-PHASE)...4 400 VOLT (50 HZ) USE FOR 380-415 VOLTS...5 480 VOLT (3-PHASE) REACTOR...6
ELECTROGALVANIZED ALUMINUM ACRYLIC PAINTED FERALOY IRON ALLOY
EDSC210 -Way Switch Cooper Crouse-Hinds Catalog Number Manufacturer Description Weight per unit Product Category Features Box Type Contact Configuration Current Rating Voltage Rating Material, Color, and
MYERS MODELS 4R AND 4RX
MYERS MODELS 4R AND 4RX SOLIDS HANDLING WASTEWATER PUMPS STANDARD (4R) AND HAZARDOUS LOCATION (4RX) CONSTRUCTION WWW.FEMYERS.COM MYERS MODELS 4R AND 4RX Solids Handling Wastewater Pumps The Right Choice
Electrical Design/Build Guide
2017 Electrical Design/Build Guide Based on the 2017 National Electrical Code Copyright Durand & Associates 1986-2016 60 C Copper Ampacity 4 - Wire Fill - (Non-Current Carrying Neutral) 4 or 5 - Parallel
Power-Limiting Cables
Power-Limiting Cables This section provides general design guidelines for power-limiting heat-tracing systems installed on insulated metal pipes. For other applications or design assistance, contact your
General Purpose Three Phase Motors TEFC (IP55) High Efficiency. Standard Features
TM WEG W21 Severe Duty motors meet the most demanding severe duty application requirements. These TEFC motors are all cast iron construction, with enclosures rated IP55 to handle wet and dirty environments.
Self-operated Temperature Regulators Temperature Regulator Type 1u
Self-operated Temperature Regulators Temperature Regulator Type u Application Temperature regulators for cooling installations Control thermostats for set points from 0 to 250 C G ½ to G or DN 5 to DN
Cartridge Heaters W A T L O W FIREROD. Cartridge Heaters
W A T L O W The Watlow revolutionized the heating element industry in 94 when it was patented as the first swaged cartridge heater. With premium materials and tight manufacturing controls, the heater continues
EDS / EFS Series Control Stations
EDS / EFS Series Control Stations Fully Assembled EFS and EDS Factory Sealed Devices Cl. I, Div. &, Groups B*, C, D Cl. II, Div., Groups E, F, G Cl. II, Div., Groups F, G NEMA, 7B*CD, 9EFG Applications:
7S Series. Standard Finishes Gray hammer epoxy/polyester pow-der coat. Compliances UL Listed. NEC OSHA
-2 7S Continuous Swivel and 7P Portable Series Extension Cord Reelites Furnished with 18-3 (2 wire plus safety ground) yellow SJOOW-A cord. Available with or without handlamps. Applications A safe and
HEAT TRACE CABLE. Introduction to Heat Trace Cable Systems Mineral Insulated Heat Trace Cable Non-Metallic Sheath
Introduction to Heat Trace Cable Systems...6-2 Mineral Insulated Heat Trace Cable...6-2 Non-Metallic Sheath Heat Trace Cable...6-2 Installation Details...6-4 Engineering Guide for Mineral Insulated Cable...6-5
THHN10STBRCP1250 THHN 10 STR Brown 1250 CP
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 THHN10STBRCP1250 THHN 10 STR Brown 1250 CP Southwire Company Catalog Number THHN10STBRCP1250 Manufacturer Southwire Company
DC MOTORS NEMA FRAME SCR RATED
NEMA FRAME SCR RATED NEMA FRAME MOTORS SCR RATED High voltage permanent magnet DC motors are typically used with an SCR (thyristor) controller in applications requiring adjustable speed and constant torque
Pictorial Index... A-14 Introduction to Heat Trace Cable Systems Installation Examples Engineering Guide Heat Loss Tables...
Pictorial Index....................... A-14 Introduction to Heat Trace Cable Systems............... 6-2 Installation Examples................... 6-3 Engineering Guide..................... 6-4 Heat Loss
Hazardous Factory Sealed Control Devices
Hazardous Factory Sealed Control Devices Description Page No. Application/Selection 428, 429 Dimensions 40 Manual Motor Starting Switches & Enclosures EDS Series 440, 44 Pilot Lights EFS Series 45 Pilot
Electric Actuated Ball Valves 3-piece Stainless Steel, Full Port 1/4 to 3 NPT
1/4 to 3 NPT Features Direct mount ISO5211 Full Port stainless steel ball valve 3-piece swing out body designed for easy maintenance 1000 PSI working pressure at 100 F (38 C) Highly visual dome style valve
Band Heaters Maxiband Heaters Maxiband The Most Sought After Band Heater
Band Heaters Maxiband Heaters Maxiband The Most Sought After Band Heater A B C D E F General purpose terminal box offers excellent protection to the exposed terminals. To simplify electrical wiring, the
NEMA Premium Efficiency T-Frame Motors. Three-Phase, TEFC Enclosures RELIABILITY MATTERS
NEMA Premium Efficiency T-Frame Motors Three-Phase, TEFC Enclosures RELIABILITY MATTERS RELIABILITY MATTERS Aurora Motors a leading global supplier of NEMA premium vertical pump motors and T-frame motors
ASTM D Standard Specification for Biodiesel Fuel (B 100) Blend Stock for Distillate Fuels
ASTM D 6751 02 Standard Specification for Biodiesel Fuel (B 100) Blend Stock for Distillate Fuels Summary This module describes the key elements in ASTM Specifications and Standard Test Methods ASTM Specification
1SV (e-sv) 60 Hz 3500 RPM
DIMENSIONS AND ENGINEERING PAGE 31 CONSTRUCTION: 34 STAINLESS STEEL NOMINAL FLOW: 9 GPM CAPACITIES: 2-12 GALLONS PER MINUTE HEADS: 13 372 PSI TDH STAGING: 2 3 MINIMUM FLOW: 2 GPM MAXIMUM WORKING 36 PSI
DC Motors. DC Motors. Gearmotors. AC / DC Controls. Accessories / Kits. Mods / Factory Options. X-Ref / Index. Tech. Information.
Motors Motors Gearmotors AC / s Accessories / Kits, explosion proof, SUB-F, washdown, IEC and low voltage motors available Permanent magnet designs PWM or SCR rated and low voltage input voltage designs
Type HLT Self-Regulating Heater Cable For use in Ordinary and Hazardous (Classified) Locations
E, I, E, Description Nelson s Type HLT self-regulating heater cable is a parallel circuit electric heater strip. A conductive fluoropolymer core material is extruded over the multi-stranded, nickel-plated,
Volume 2 Charts, Formulas, and Other Useful Information
Volume 2 Charts, Formulas, and Other Useful Information Aluminum Conductor Conductor Terminations 61 Compact Aluminum (Conduit Fill Tables) 68-79 Ampacity Dwelling Services 48 1-phase Loads on a 3-phase