SPH214 Small Panel Handler
|
|
- Bethany McBride
- 5 years ago
- Views:
Transcription
1 Thomson Engineering Design Ltd SPH214 Small Panel Handler Operator s Instructions Original Document in English Language Issue 2 November 2015 Copyright: Thomson Engineering Design Ltd all rights reserved
2 Introduction The Thomson Engineering Design Small Panel Handler has been designed for li ing, loading and handling rail panels up to 6,000kg. The Small Panel Handler incorporates a safety valve system to prevent inadvertent release of the load and a pressure control system to make it compa ble with a wide range of host machines. This document is designed to give operators and crane controllers the informa on necessary to use the Small Panel Handler in a safe and efficient manner. It includes details of the maintenance opera ons which are required to keep the device in good working order. The maintenance of this device must be carried out by competent persons. Thomson Engineering Design Ltd can provide training in maintenance opera ons if required. Warning The Thomson Engineering Design Small Panel Handler must not be used for any purpose or in any way not described within this document. Using the Thomson Engineering Design Small Panel Handler for any purpose not described in this document may be dangerous and may invalidate the manufacturer s warranty. Warning The maximum hydraulic pressure which may be applied to the hydraulic circuit of the Small Panel Handler is 210 Bar. The minimum pressure required for safe opera on is 90 Bar. It is important to check that the pressure of the host machine hydraulic output is within this range. It is extremely dangerous to over-pressurise a hydraulic system and doing so may lead to severe injury. Warning Where a two-pin adapter head is fi ed the user s a en on is drawn to the instruc ons on Page 9. The hydraulic service on the host machine must be adjusted to ensure that the maximum pressure ra ng of the Small Panel Handler is not exceeded. If this is not possible then refer to the manufacturer before using the Small Panel Handler. The Thomson Engineering Design Small Panel Handler is proudly designed and made in the United Kingdom. 2 Copyright: Thomson Engineering Design Ltd all rights reserved
3 Contents Introduc on 2 Specifica ons 3 Issue Record 3 Descrip on of the Small Panel Handler 4 Daily Checks 5 Daily Maintenance 6 A aching & Connec ng the Small Panel Handler 8 Notes on using Two Pin Adapter Heads 9 Opera on of the Jaws and Indicators 11 Using the Small Panel Handler 12 Disconnec ng & Transpor ng the Small Panel Handler 14 Warnings 15 Contac ng the Manufacturer 16 Cer ficate of Conformity 17 Ordering Spare Parts 18 Specifications Overall Dimensions Height 760 mm Width 1,780 mm Length 4,135 mm Overall Weight (according to spec.) 540 kg to 750 kg Minimum Hydraulic Pressure 90 Bar Maximum Hydraulic Pressure 210 Bar Maximum Working Load 6,000 kg Proof Load (Factory Test) 9,000 kg Issue Record Issue 1 August 2014 Issue 2 November 2015 Copyright: Thomson Engineering Design Ltd all rights reserved 3
4 Description of the Small Panel Handler The main parts of the Thomson Engineering Design Small Panel Handler are illustrated below. The Small Panel Handler is a ached to the host machine by the connec on bracket and connected to the host machine s hydraulic system via the supply hoses. The hydraulic cylinders open and close the jaws of the Small Panel Handler to grip and release the rail. Each cylinder is fi ed with a check valve to lock the cylinders in posi on in the event of a hose burst. To prevent damage during transport the jaws are fully enclosed within the beam fabrica on. Indicators are provided to allow the operator to see whether the jaws are open or closed. 4 Copyright: Thomson Engineering Design Ltd all rights reserved
5 Daily Checks Daily checks of the Small Panel Handler are designed to ensure that it is fit for use. The following is a list of the relevant daily checks. These should be carried out at the start of the shi before pu ng the Small Panel Handler into service. If the Small Panel Handler is used for an extended period then these checks should be repeated every six to eight hours of use. All jaws operate smoothly Frame free from cracks and distor on Jaws not worn to excess All nuts and bolts ght No visible hydraulic leaks Hydraulic hoses free from damage Mechanism moves freely Jaw indicators move freely up and down Adapter head (where fi ed) moves freely No play in adapter head pins Copyright: Thomson Engineering Design Ltd all rights reserved 5
6 Daily Maintenance Daily maintenance is limited to greasing of the jaws and cylinder ends. The following is a list of the relevant daily maintenance. This should be carried out at the start of the shi before pu ng the Small Panel Handler into service. If the Small Panel Handler is used for an extended period then these maintenance opera ons should be repeated every six to eight hours of use. Oil should be applied to the following point (see illustra on) Safety valve plunger Apply oil to the plunger of the safety valve. 6 Copyright: Thomson Engineering Design Ltd all rights reserved
7 Daily Maintenance (cont d..) Grease should be applied to the following points (see illustra on) Jaw Pins (2 grease points on each jaw assembly) Cylinder ends (4 points) Apply grease to the jaw hinge pins and the cylinder top boss. Use a lithium based general purpose grease. Copyright: Thomson Engineering Design Ltd all rights reserved 7
8 Attaching & Connecting the Small Panel Handler Suspend the Small Panel Handler from the Host Machine Connect the a achment bracket of the Small Panel Handler to the host machine following the instruc ons for the host machine coupling device. It is important that the connec on system has a safe working load in excess of 7,000kg. Connect the Small Panel Handler Hydraulic System to the Host Machine Stop the engine of the host machine and de-pressurise the hydraulic system. Connect the supply hoses of the Small Panel Handler to the auxiliary hydraulic connec ons of the host machine. Note: changes of temperature can mean that the closed system of the Small Panel Handler can become pressurised whilst it is being stored. Beware of the risk from release of hydraulic fluid under pressure which can cause very serious injury. Once the hydraulic connec ons are secure, re-start the host machine, li the Small Panel Handler clear of the ground and operate the hydraulic control to open and close the jaws three or four mes. This ensures that any trapped air is discharged from the cylinders and pipes of the Small Panel Handler. A er the device has been operated a few mes check the complete hydraulic system for signs of leakage. Stop the host machine and correct any leakage found before using the Small Panel Handler. Note: hydraulic quick release couplings should be of a type which prevents fluid discharge to the environment on connec on and release. Manually guiding the Small Panel Handler If at any me it becomes necessary to manually guide the Small Panel Handler then this must be done from a posi on of safety and never from below a suspended load. Never hold the Small Panel Handler close to the jaw mechanisms as inadvertent opera on of the mechanism could lead to serious injury. 8 Copyright: Thomson Engineering Design Ltd all rights reserved
9 Notes on Two-Pin Adapter Heads The Small Panel Handler is frequently fi ed with a two-pin adapter head for use with a quick coupler. It is important when a aching to a two-pin adapter head to ensure that the two pin link of the adapter head can move freely throughout the full working range of the host machine boom. When correctly set the quick coupler is a ached to the two pin link of the adapter head and crowded back to allow the link to pivot freely throughout the machine boom range (see above). Failure to crowd the quick coupler back can lead to the link hi ng the stop blocks which can damage the adapter head and the rotator. Copyright: Thomson Engineering Design Ltd all rights reserved 9
10 This page is intentionally blank 10 Copyright: Thomson Engineering Design Ltd all rights reserved
11 Operation of the Jaws and Indicators red painted indicator A is fi ed to each jaw assembly. When the indicators are raised as shown in the image (le ), this indicates that the jaws are open. When the jaws are closed and gripping the rails of a track panel the indicators drop down into the mechanism. This tells the operator that the jaws are fully locked and that the device is ready to li the panel. Copyright: Thomson Engineering Design Ltd all rights reserved 11
12 Using the Small Panel Handler Fi ng the Small Panel Handler to a Panel To fit the Small Panel Handler to a track panel follow the pictorial instruc ons on this page. 1. Check that the jaws are open (the indicators will be protruding above the tops of the jaw assemblies). Align the panel handler with the centre of the panel. 2. Lower the Panel Handler onto the rails so that the rail heads fit in the slots in the jaw assemblies. 3. Close the jaws to grip the panel. Check that all the indicators are flush with the top of the jaw housings to check that the jaws are properly closed. The panel may now be li ed. 12 Copyright: Thomson Engineering Design Ltd all rights reserved
13 Li ing a Panel Li the panel slowly and check that it hangs level. If the panel does not hang level lower the panel again and reposi on the panel li er. X Do NOT li an unbalanced load Releasing a Panel When the handling opera on is complete and the panel is res ng on a firm, level surface, lower the machine boom un l the centre head of the panel li er releases the safety valve. The jaws may now be released. Check that all four indicators have risen before li ing the Panel Handler clear of the track panel. Copyright: Thomson Engineering Design Ltd all rights reserved 13
14 Disconnecting and Transporting the Small Panel Handler Once the work is complete the Small Panel Handler should be placed on a firm, level surface and disconnected from the host machine. Once the Small Panel Handler is safely supported stop the engine of the host machine and de-pressurise the hydraulic system. Release the hydraulic connec ons and disconnect the a achment system from the host machine hook. Carefully wrap up the hydraulic connec on hoses before transport to ensure that they do not get damaged in transit. 14 Copyright: Thomson Engineering Design Ltd all rights reserved
15 Warnings WARNING ALWAYS STOP THE ENGINE OF THE HOST MACHINE AND RELEASE THE PRESSURE FROM THE HYDRAULIC SERVICES BEFORE ATTEMPTING TO CONNECT OR DISCONNECT HYDRAULIC ATTACHMENTS. MAXIMUM RATED PRESSURE OF 210 BAR MUST NOT BE EXCEEDED. EXCEEDING THIS PRESSURE MAY LEAD TO BURST HOSES OR LEAKAGE FROM COMPONENTS. HYDRAULIC FLUID UNDER PRESSURE CAN CAUSE SEVERE INJURY. WARNING NEVER CARRY OUT ANY LIFTING OPERATION UNTIL YOU ARE SURE THAT THE WORK AREA IS CLEAR OF ALL PERSONNEL. ALL LIFTING OPERATIONS SHOULD BE PROPERLY PLANNED AND DUE CONSIDERATION GIVEN TO THE LIFTING CAPACITY OF THE HOST MACHINE. WHEN PLANNING A LIFTING OPERATION REMEMBER TO TAKE THE WEIGHT OF THE ATTACHMENT INTO ACCOUNT. WARNING DO NOT EXCEED THE SAFE WORKING LOAD OF THE SMALL PANEL HANDLER. LOADS IN EXCESS OF THE SAFE WORKING LOAD MAY CAUSE UNSEEN DAMAGE TO THE DEVICE AND LEAD TO SPONTANEOUS FAILURE AT A LATER DATE. WARNING VISUALLY INSPECT THE DEVICE DAILY FOR CRACKS AND DISTORTION OF THE FRAME, JAWS AND ATTACHMENT SYSTEM. IF ANY DEFECTS ARE NOTED THE DEVICE SHOULD BE REMOVED FROM SERVICE UNTIL THE FAULT IS RECTIFIED. CONTACT THE MANUFACTURER FOR REPAIR INSTRUCTIONS. WARNING THE Small Panel Handler IS DESIGNED FOR THE HANDLING OF TRACK PANELS UP TO 6,000KG. IT MUST NOT BE USED FOR ANY OTHER PURPOSE. THE USE OF THE Small Panel Handler FOR ANY OTHER PURPOSE MAY LEAD TO SEVERE INJURY TO PERSONS AND DAMAGE TO THE DEVICE. WARNING ONLY TRAINED AND COMPETENT OPERATORS SHOULD USE THE Small Panel Handler. DO NOT ATTEMPT TO USE THE Small Panel Handler UNTIL YOU HAVE READ AND UNDERSTOOD THIS OPERATORS MANUAL. ALWAYS COMPLETE THE DAILY CHECKS AND MAINTENANCE BEFORE USING THE Small Panel Handler. If any part of this Operators Instruc on document is unclear or for any technical advice please contact the manufacturer. Manufacturer s contact details can be found on Page 16. Copyright: Thomson Engineering Design Ltd all rights reserved 15
16 Contacting the Manufacturer The Thomson Engineering Design Small Panel Handler is manufactured in the United Kingdom by: Thomson Engineering Design Ltd Valley Road Cinderford Gloucestershire England GL14 2NZ Tel: +44 (0) Fax: +44 (0) All spare parts, technical, training and sales enquiries should be directed to the manufacturer. Please note that outside normal business hours all calls are diverted to an oncall technical advisor. 16 Copyright: Thomson Engineering Design Ltd all rights reserved
17 Certificate of Conformity We: Thomson Engineering Design Ltd Valley Road Cinderford Gloucestershire GL14 2NZ Declare under our sole responsibility that the product known as: SPH214 Small Panel Handler To which this declaration relates is in conformity with the following standards: 2006/42/EC Authorised signatory: David Thomson BSc August 2014 Copyright: Thomson Engineering Design Ltd all rights reserved 17
18 Ordering Spare Parts All spare parts for the Small Panel Handler are available from the manufacturer and through our agents. Parts may be ordered by giving the device serial number(from the manufacturer s plate affixed to the frame) and the part number/descrip on from the parts lists in the following pages. 18 Copyright: Thomson Engineering Design Ltd all rights reserved
19 Copyright: Thomson Engineering Design Ltd all rights reserved 19
20 20 Copyright: Thomson Engineering Design Ltd all rights reserved
21 Copyright: Thomson Engineering Design Ltd all rights reserved 21
22 22 Copyright: Thomson Engineering Design Ltd all rights reserved
23 Copyright: Thomson Engineering Design Ltd all rights reserved 23
24 Thomson Engineering Design Ltd. Valley Road, Cinderford, Gloucestershire. GL14 2NZ Tel: +44 (0) Fax: +44 (0)
Thomson Engineering Design Ltd. Drag Clamp. Operator s Instructions. Original Document in English Language. Issue 2 March 2015
Thomson Engineering Design Ltd Drag Clamp Operator s Instructions Original Document in English Language Issue 2 March 2015 Document Number: DC-Inst-01 Issue: 02 Date: March 2015 Introduction The Thomson
More informationSPL16 Stovepipe Lifter
Thomson Engineering Design Ltd SPL16 Stovepipe Lifter Operators Instructions, Maintenance Instructions & Parts Book Original Document in English Language Issue 1 September 2016 Copyright: Thomson Engineering
More informationTRLB20 TELESCOPIC RAIL BEAM Specifi cations
TRLB20 TELESCOPIC RAIL BEAM Specifi cations Technical details and specifi cations for the Thomson Engineering Design TRLB20 Telescopic Rail Beam including both manual and hydraulically telescoping types
More informationSignal Head Crane Maintenance Plan and Instructions
Signal Head Crane Maintenance Plan and Instructions Maintenance and Inspection Instructions for the Thomson Engineering Design Ltd Signal Head Crane Original Document in English Language Issue 2: January
More informationTD15-01 Threader Dragger
Thomson Engineering Design Ltd TD15-01 Threader Dragger Operators Instructions, Maintenance Instructions & Parts Book Original Document in English Language Issue 1 May 2016 Copyright: Thomson Engineering
More informationAUTOLOK Heavy-Duty Rail Clamp
AUTOLOK Heavy-Duty Rail Clamp A cam operated rail clamp designed for use with excavators and cranes Issue 2 January 2019 Introduction The Autolok series of rail grabs from Thomson Engineering Design are
More informationINSTANT BARRIER SYSTEM Brochure
INSTANT BARRIER SYSTEM Brochure Key Elements and Features of the Thomson Engineering Design Instant Barrier System Issue 1 April 2017 Introduction The Thomson Instant Barrier Post is fully approved by
More informationEDC15-01 DECLIPPER for Pandrol E and PR clips
EDC15-01 DECLIPPER for Pandrol E and PR clips A Heavy Duty RRV Attachment for Extracting Pandrol Clips Issue 3 January 2016 Introduction In 2009 Thomson Engineering Design in associa on with Balfour Bea
More information3 Ton Trolley Jack. Please read and fully understand the instructions in this manual before operation. Keep this manual safe for future reference.
Please dispose of packaging for the product in a responsible manner. It is suitable for recycling. Help to protect the environment, take the packaging to the local amenity tip and place into the appropriate
More information2 Ton - 50 Ton Bottle Jack
Please dispose of packaging for the product in a responsible manner. It is suitable for recycling. Help to protect the environment, take the packaging to the local amenity tip and place into the appropriate
More informationHYDRAULIC QUICK HITCH
HYDRAULIC QUICK HITCH Installation & Operation Manual Important: This manual must be kept with the excavator at all times and referred to as required Harford Attachments Ltd Table of Contents Introduction
More information3.25 Ton Heavy Duty Floor Jack
Please dispose of packaging for the product in a responsible manner. It is suitable for recycling. Help to protect the environment, take the packaging to the local amenity tip and place into the appropriate
More informationHARFORD SAFELOCK MECHANICAL QUICK HITCH
HARFORD SAFELOCK MECHANICAL QUICK HITCH Installation & Operation Manual Important: This manual must be kept with the excavator at all times and referred to as required Harford Attachments Ltd Table of
More informationATD 3-Ton Jack Pack. Jack Size (L x W x H) Saddle Diameter Net Weight
Opera ng Instru ons & Parts Manual ATD 3-Ton Jack Pack Model: ATD-7500 Service Jack Model Number: ATD-7504 Capacity Min. Height Max Height Jack Size (L x W x H) Saddle Diameter Net Weight 3 Ton 5-3/8 19-1/2
More informationMECHANICAL QUICK HITCH
MECHANICAL QUICK HITCH Installation & Operation Manual Important: This manual must be kept with the excavator at all times and referred to as required Harford Attachments Ltd Table of Contents Item Checklist
More informationBee Access Products. Aluminum Parapet Clamp. Specifications. Description. Manual M
Description Made to clamp onto structural parapet walls up to 33 in. thick. Designed for use with suspended scaffolding (for suspension as well as ebacks, except in Canada), or as an anchorage point for
More informationOPERATOR MANUAL Chopper Hopper
1 OPERATOR MANUAL Chopper Hopper www.agriweld.co.uk The Workshops Main Street Garton-on-the-Wolds Driffield, YO25 3ET Tel: 01377 259140 Fax: 01377 259141 Email: sales@agriweld.co.uk 2 Contents Page 3 User
More informationMAINTENANCE PLAN FOR RLB20 RAIL BEAM
FOR RLB20 RAIL BEAM Issued by.. Design Ltd Approved By PAB This publication, including the data and information relating hereto, is not to be used, disseminated, and stored in a retrieval system, reproduced,
More informationValve Lockouts. Valve lockouts are available to suit all types of valve including ball valve, gate valve, globe valve and plug valve.
Valve lockouts are available to suit all types of valve including ball valve, gate valve, globe valve and plug valve. A well fi ed valve lockout will provide protec on against accidental or unauthorised
More information1/4 Die Grinder. Please read and fully understand the instructions in this manual before operation. Keep this manual safe for future reference
Please dispose of packaging for the product in a responsible manner. It is suitable for recycling. Help to protect the environment, take the packaging to the local amenity tip and place into the appropriate
More information04979, 04980, 04981, 04982, 04983, 04984, 39054, 39055, 39056, 39057, 39225, 81459,
Hydraulic Bottle Jacks 04979, 04980, 04981, 04982, 04983, 04984, 39054, 39055, 39056, 39057, 39225, 81459, 82132. These instructions accompanying the product are the original instructions. This document
More informationOperating Manual. Pantographs. Version 05/12.
Operating Manual Pantographs Version 05/12 Parts & Features A pantograph is a mechanical device that enables a load to be suspended by the means of balancing the load with two or more constant tension
More information80 Litre Suction Oil Drainer With Inspection Chamber
Please dispose of packaging for the product in a responsible manner. It is suitable for recycling. Help to protect the environment, take the packaging to the local amenity tip and place into the appropriate
More informationTAYLOR STUDWELDING SYSTEMS LIMITED OPERATING GUIDE FOR TYPE DA8 A DRAWN ARC STUDWELDING PISTOLS V 1B 1
TAYLOR STUDWELDING SYSTEMS LIMITED OPERATING GUIDE FOR TYPE DA8 A DRAWN ARC STUDWELDING PISTOLS V 1B 1 INDEX PAGE CONTENT 3 GENERAL INFORMATION 4 SAFETY 5 INTRODUCTION TO STUDWELDING 6 MODEL VARIANTS 7
More informationUser Manual. T29870 Beam Clamp. Original Instructions. Rev /08//14.
User Manual T29870 Beam Clamp Original Instructions Rev 1.0-12/08//14 www.doughty-engineering.co.uk Contents Introduction... 2 Exclusion of Liability... 2 Safety Instructions... 2 Operation... 3 Maintenance...
More informationMulti Bale Handler. No Instruction Manual & Operating Guide
Multi Bale Handler No. 1412 Instruction Manual & Operating Guide EC Declaration of Conformity in accordance with BS EN ISO/IEC 17050-1:2004 David Ritchie (Implements) Ltd., Carseview Road, Forfar, Scotland
More informationInstructions for: FOLDING ENGINE CRANE PREMIER 2 TONNE. MODEL No: SPC2000
Instructions for: FOLDING ENGINE CRANE PREMIER 2 TONNE MODEL No: SPC2000 Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions,
More information12v / 24v Diesel Transfer Pump Kit
Please dispose of packaging for the product in a responsible manner. It is suitable for recycling. Help to protect the environment, take the packaging to the local amenity tip and place into the appropriate
More information1 TONNE FOLDING CRANE. 1 TONNE FOLDING CRANE MODEL No CFC100 PART No OPERATING & MAINTENANCE INSTRUCTIONS 1202
1 TONNE FOLDING CRANE 1 TONNE FOLDING CRANE MODEL No CFC100 PART No 7611005 OPERATING & MAINTENANCE INSTRUCTIONS 1202 2 11 SPARE PARTS No Description Qty Part No No Description Qty Part No 1 Main Support
More informationRescue Pac. Please read and fully understand the instructions in this manual before operation. Keep this manual safe for future reference
Please dispose of Packaging for the product in a responsible manner. It is suitable for recycling. Help to protect the environment, take the packaging to the local amenity tip and place into the appropriate
More informationPro Booster 802Li. Please read and fully understand the instructions in this manual before operation. Keep this manual safe for future reference.
Please dispose of packaging for the product in a responsible manner. It is suitable for recycling. Help to protect the environment, take the packaging to the local amenity tip and place into the appropriate
More informationYieldSense CNH Installation Guide
YieldSense CNH Installation Guide 9/2013 1 955521 Precision Plan ng, LLC 23207 Townline Road Tremont, IL 61568 ph. (309) 925-5050 fax. (309) 925-5029 info@precisionplan ng.com 2020support@precisionplan
More informationOperation and Safety Manual
Barrel Handler Operation and Safety Manual EZ SPOT UR Inc. 803 25 th St. N Fargo, ND 58102 Toll Free: 877 433 5733 Phone: 701 282 2772 Fax: 701 277 4625 Table of Contents Safety Symbols & Equipment Signs...
More informationOperating & Safety Manual
Operating & Safety Manual Pipe Cutter DN70, DN100 & DN150/ 3, 4 & 6 Pipe Cutter Ultra Flex DN70, DN100 & DN150/ 3, 4 & 6 I N S T R U C T I O N S These instruc ons are for your personal safety. Always ensure
More informationHEAVY DUTY CRANE HDC RANGE OPERATING G & MAINTENANCE INSTRUCTIONS
HEAVY DUTY CRANE HDC RANGE OPERATING G & MAINTENANCE INSTRUCTIONS 0599 SPECIFICATIONS cont... No. Description Part No. No. Description Part No. MAXIMUM SAFE WORKING LOADS (kg) HDC50 HDC100 HDC150 HDC200
More informationPLATE CLAMPS INSTRUCTION MANUAL
PLATE CLAMPS INSTRUCTION MANUAL Imported exclusively by Pacific Hoists Pty. Ltd. & Pacific Hoists Ltd. In support of cancer charities in Australia & New Zealand Universal Plate Clamp 1 Horizontal Plate
More information15,000kg HYDRAULIC BOTTLE JACK
Product Code: 2013 OWNER S MANUAL PRODUCT CODE: 2013 15,000kg HYDRAULIC BOTTLE JACK Lifting Capacity 15,000kg Max. Lifting Height 447mm Min. Lifting Height 227mm Hydraulic Lift 125mm Screw Adjustment 70mm
More informationAUTOGARD SERIES 820 TORQUE LIMITER Installation and Maintenance Manual DB0009 Issue 11 21 Feb 2017 British Autogard Ltd 2 Wilkinson Rd., Love Lane Industrial Estate, Cirencester, Glos., GL7 1YT UK Tel.
More informationLOG CHOP. Hydraulic Wood Guillotine. Owners Illustrated Instruction Book & Parts List
LOG CHOP Hydraulic Wood Guillotine Owners Illustrated Instruction Book & Parts List Grovebury Road, Leighton Buzzard, Bedfordshire. LU7 4UX. UK. Tel:01525 375157. Fax:01525 385222. Email: enquires@brownsagricultural.co.uk
More informationSupport T10552 T10595 T40386
T10552 T10595 T40386 en-gb 7 T10552 T10595... 1 General Information Product name: Product type: Product number: Weight: Max. load capacity: Static test coefficient: 3.0 Intended Use: Load holding device
More informationOMEGA. Separator Units. Standen Engineering Limited. Hereward Works, Station Road, Ely, Cambridgeshire. CB7 4BP England.
OMEGA Separator Units Standen Engineering Limited. Hereward Works, Station Road, Ely, Cambridgeshire. CB7 4BP England. Tel: 01353 661111 www.standen.co.uk Fax: 01353 662370 IMPORTANT This operator s handbook
More informationOPERATOR MANUAL SUBSOILER
OPERATOR MANUAL SUBSOILER www.agriweld.co.uk The Workshops Main Street Garton-on-the-Wolds Driffield, YO5 3ET Tel: 01377 59140 Fax: 01377 59141 Email: sales@agriweld.co.uk Contents Page 3 Page 4 Page 5
More informationADVANTAGE. The Workshops Main Street Garton-on-the-Wolds Driffield, YO25 3ET Tel: Fax:
1 ADVANTAGE www.agriweld.co.uk The Workshops Main Street Garton-on-the-Wolds Driffield, YO25 3ET Tel: 01377 259140 Fax: 01377 259141 Email: sales@agriweld.co.uk 2 Contents Page 3 Page 4 Technical Information
More informationMaintenance and Operating Instructions PG Style Pipe Grapple
Maintenance and Operating Instructions PG Style Pipe Grapple Read this manual before installing, operating or servicing this product. This manual contains important information. Make this manual available
More informationInstruction Manual Montage- und Betriebsanleitung Notice d utilisation
Instruction Manual Montage- und Betriebsanleitung Notice d utilisation 2 Cast Fifth Wheel 2 Guss-Sattelkupplung Sellette 2 en fonte C O N N E C T Y O U R B U S I N E S S W I T H F O N T A I N E C O N T
More informationSheet Metal Shear. Please read and fully understand the instructions in this manual before operation. Keep this manual safe for future reference.
Please dispose of packaging for the product in a responsible manner. It is suitable for recycling. Help to protect the environment, take the packaging to the local amenity tip and place into the appropriate
More informationPAGE 1 OF 5 HEALTH, SAFETY & ENVIRONMENTAL MANUAL PROCEDURE: S360 Overhead Cranes & Lifts Procedure REV 4.0 8/14/2012
PAGE 1 OF 5 PURPOSE: OVERHEAD CRANES AND LIFTS PROCEDURE The purpose of this procedure is to define the safety and training requirements for use of overhead cranes and lifts. Procedure: Definitions Designated
More information2 TONNE TROLLEY JACK
2 TONNE TROLLEY JACK 61829 IMPORTANT: Please read these instructions carefully to ensure the safe and effective use of this product and save these instructions for future reference. This manual has been
More informationFOR ENGCON TILTROTATOR/ROTATOR EC/ECR02-30 THE WIDEST RANGE ON THE MARKET
Tiltrotator/rotator EC/ECR02-30 English FOR ENGCON TILTROTATOR/ROTATOR EC/ECR02-30 THE WIDEST RANGE ON THE MARKET Original instruction manual Version 201002 Congratulations for choosing engcon s tiltrotator/rotator.
More informationOperator s Manual. GreenTek Ltd Rudgate Walton Leeds LS23 7AU UK
Easy-Load Operator s Manual GreenTek Ltd Rudgate Walton Leeds LS23 7AU UK Certificate of CE Conformity Date: 10 February 2003 Machine Model: Description: Easy-Load High Tipping Trailer Serial Number: I
More informationOPERATION & MAINTENANCE INSTRUCTIONS
10 TONNE HEAVY DUTY LONG CHASSIS TROLLEY JACK MODEL NO: CTJ10GLS PART NO: 7623095 OPERATION & MAINTENANCE INSTRUCTIONS LS0915 INTRODUCTION Thank you for purchasing this CLARKE 10 Tonne Heavy Duty Long
More informationChargestar P24 / P32 Battery Charger Startmaster P300 Starter / Charger
Please dispose of packaging for the product in a responsible manner. It is suitable for recycling. Help to protect the environment, take the packaging to the local amenity tip and place into the appropriate
More informationBOLT TENSIONERS. carefully before use and retain it for reference.
BOLT TENSIONERS This manual contains IMPORTANT WARNINGS, CAUTIONS and other instructions. Read and understand the instructions manual carefully before use and retain it for reference. TORCUP MIDDLE EAST
More informationOPERATING MANUAL C-1350 CABLE PUSHER. Copyright 2003 by CBS Products (KT), Ltd
CBS Products (KT), Ltd, Pillings Road, Oakham, Rutland, LE15 6QF. UK Telephone: +44(0)1572723665 Fax: +44(0)1572 756006 E-Mail: sales@cbsproducts.com Website:www.cbsproducts.com OPERATING MANUAL C-1350
More information20 TONNE HYDRAULIC PRESS MODEL NO: CSA20FBT
20 TONNE HYDRAULIC PRESS MODEL NO: CSA20FBT PART NO: 7614058 OPERATION & MAINTENANCE INSTRUCTIONS WARNING: Read these instructions before using the press GC0516 INTRODUCTION Thank you for purchasing this
More informationPLEASE PUT THIS OPERATOR'S MANUAL IN THE DRIVER'S CAB
CONFORMS WITH EUROPEAN REGULATIONS PLEASE PUT THIS OPERATOR'S MANUAL IN THE DRIVER'S CAB OPERATOR'S MANUAL For a full list of Edbro Service Agents and Distributors, please refer to: www.edbro.com/dealerlocator
More informationBattery Charger JCB-FCH12Li
Safety and operating manual Battery Charger JCB-FCH12Li ORIGINAL INSTRUCTIONS SAFETY INSTRUCTIONS WARNING: Read all safety warnings and all instructions.failure to follow the warnings and instructions
More informationOperating manual & book of parts
Operating manual & book of parts Ordering code: 08012014 Edition: 22-09-2014 (English) Mast Height Extension (MHE) www.telescopicforks.com MEIJER HANDLING SOLUTIONS 2006 2 Table of contents 1 Remarks...
More informationHeavy Duty Engine Cranes
Heavy Duty Engine Cranes Operating Instructions & Parts Manual Model Number ATD-7484 ATD-7485 (Foldable Legs) Capacity 2 Ton 2 Ton Model ATD-7484 Model ATD-7485 WARNING: This product may contain chemicals,
More informationJacking Beams CJB800 Range
f Jacking Beams CJB800 Range Operators Manual for Class IV and VII models I323287 Issue 3 Manual & Air Powered Jacking Beams 2.0 and 2.8 Tonne Capacity CJB82-2T Manual for Class IV, Post Lift CJB83-2T
More informationHakki Lift 381. The operator must always read and understand these instructions before operating the device!
ENGLISH Hakki Lift 38 LOG HOIST - Operator s manual - EY Declaration of Conformity - Safety instructions - Warranty terms - Exploded view and parts list The operator must always read and understand these
More informationINTAKE HOPPER STX/TF/TFX/WR AUGERS OPERATOR AND ASSEMBLY MANUAL
INTAKE HOPPER STX/TF/TFX/WR AUGERS OPERATOR AND ASSEMBLY MANUAL Read this manual before using product. Failure to follow instructions and safety precautions can result in serious injury, death, or property
More informationOperating manual Separator
Operating manual Separator Sheet no. AS/4.1.141.1.1 issue 20.08.2014 Contents Section Title Page 0 Introduction... 1 1 Intended use......1 2 Marking of the fitting... 1 3 Safety instructions... 2 4 Transport
More informationov-lifting_bolts_divider - Updated Lifting Bolts
ov-lifting_bolts_divider - Updated - 09-01-2017 Lifting Bolts Technical Information roduct information Lifting Bolts roduct marking Compliant with 2006/42/EC, and with individual date of manufacture and
More informationHYDRAULIC PALLET TRUCK. MODEL No: PTE550 PART Nos OPERATION & MAINTENANCE INSTRUCTIONS
HYDRAULIC PALLET TRUCK MODEL No: PTE550 PART Nos 7630171 OPERATION & MAINTENANCE INSTRUCTIONS 0604 Please read these instructions carefully before operating the truck Thank you for purchasing this CLARKE
More informationHYDRAULIC MOTORCYCLE LIFT
HYDRAULIC MOTORCYCLE LIFT MODEL NO: CML5 PART NO: 7610193 OPERATION & MAINTENANCE INSTRUCTIONS LS0713 INTRODUCTION Thank you for purchasing this CLARKE hydraulic motorcycle lift. Before attempting to operate
More information500kg HYDRAULIC TABLE LIFT
Product Code: 6007T OWNER S MANUAL PRODUCT CODE: 6007T 500kg HYDRAULIC TABLE LIFT Working Load Limit 500kg Maximum Height 1575mm Minimum Height 440mm Table Dimensions 1010x520mm Wheel Diameter 150mm Made
More informationMelody 1 Platform Lift
USER MANUAL Melody 1 Platform Lift Original instructions CONTENTS PAGE Introduction 4 Description 4 General Do s and Don ts 6 Controls 7 Operating the Lift 8 Emergency Procedures 9 Platform Gate Lock
More informationOperator s manual for scraper blade
Operator s manual for scraper blade Manufacturer: AS SAMI Tule 20, Saue, Harjumaa, 76505 www.sami.ee 2 1. Introduction AS SAMI wants to thank you for purchasing this attachment. We hope that you will be
More informationACTIVE SEAT SYSTEM. General User/ Safety Guide. ACTIVE CUSHIONS
General User/ Safety Guide ACTIVE SEAT SYSTEM ACTIVE CUSHIONS www.harvesthealthcare.co.uk E sales@harvesthealthcare.co.uk www.harvesthealthcare.co.uk 1 CONTENTS WARNINGS & CAUTIONS GENERAL INFORMATION
More informationProvided by: Operating, Maintenance & Parts Manual
Provided by: www.hoistsdirect.com TB681.qxd 11/29/2004 3:04 PM Page 1 Operating, Maintenance & Parts Manual TB603 Manually Lever Operated Chain Hoist 1100 POUNDS MAXIMUM CAPACITY (500 kg) Follow all instructions
More informationGARAGE JACK MODEL NO: CTJ3000G PART NO: OPERATION & MAINTENANCE INSTRUCTIONS ORIGINAL INSTRUCTIONS
GARAGE JACK MODEL NO: CTJ3000G PART NO: 7623030 OPERATION & MAINTENANCE INSTRUCTIONS ORIGINAL INSTRUCTIONS GC1217 INTRODUCTION Thank you for purchasing this CLARKE Garage Jack. Before attempting to use
More informationMODEL Model 55. Model 135 CUSTOMER MUST RECEIVE THIS MANUAL AT TIME OF SALE OR AFTER INSTALLATION. Rev 1/16 PN
MODEL 55 135 Model 55 Rated for motors up to 55 horsepower and 250 lbs. Model 135 Rated for motors up to 135 horsepower and 350 lbs. CUSTOMER MUST RECEIVE THIS MANUAL AT TIME OF SALE OR AFTER INSTALLATION
More informationHeavy Duty Engine Cranes
Heavy Duty Engine Cranes Operating Instructions & Parts Manual Model Number Atd-7484 Atd-7485 (Foldable Legs) Capacity 2 Ton 2 Ton Model Atd-7484 Model Atd-7485 Atd Tools Inc. 160 Enterprise Drive, Wentzville,
More informationUser Manual. Studio Rail. Size Version
User Manual Studio Rail Size 60 Version 10.1 Contents Contents: Introduction... 2 Exclusion of Liability... 2 Safety Instructions... 2 Operating Data...3-8 1. Selecting the correct carriage...3-5 2. Mounting
More informationUser Manual. H Frames. Original Instructions. Revision
User Manual H Frames Original Instructions Revision 1.3 Contents Contents: Introduction... 2 Exclusion of Liability... 2 Safety Instructions... 2 Assembly Examples... 4 Assembly... 5 Couplers... 6 Extensions...
More informationInstruction Manual. Unique Single Seat Valve - Manually Operated ESE00523-EN Original manual TD TD
Instruction Manual Unique Single Seat Valve - Manually Operated TD 461-583 TD 461-791 ESE00523-EN6 2016-07 Original manual Table of contents The information herein is correct at the time of issue but
More informationPB10 HYDRAULIC PIPE BENDER OPERATING AND 1379 SAFETY INSTRUCTIONS Prepared by:- M.Davies Approved by:- Date: 16/09/14 REV NO:- 1 ECO:- 4282
INSPECTION UPON RECEIPT OF GOODS On initial receipt of goods visually check for transit damage. If found contact the carrier immediately. Hi-Force does not necessarily know the circumstances of use of
More informationInstruction Manual. LKAP Air-Operated Valve ESE01993-EN Original manual
Instruction Manual LKAP Air-Operated Valve ESE01993-EN6 2016-07 Original manual Table of contents The information herein is correct at the time of issue but may be subject to change without prior notice
More information2 TONNE TROLLEY JACK
2 TONNE TROLLEY JACK Model No: CTJ2000LP PART NO: 7623065 OPERATING & MAINTENANCE INSTRUCTIONS GC01/12 INTRODUCTION Thank you for purchasing this CLARKE Trolley Jack. Before attempting to use this product,
More informationTANKERS OPERATING & SAFETY INSTRUCTIONS FOR SPARE PARTS GO TO
TANKERS OPERATING & SAFETY INSTRUCTIONS FOR SPARE PARTS GO TO WWW.MARSHALL-TRAILERS.CO.UK FOR MODELS: ST1200, ST1400, ST1600, ST1800, ST2000, ST2300, ST2550 CHARLES J. MARSHALL (ABERDEEN) LTD CHAPEL WORKS,
More informationINSTRUCTION MANUAL. Pacific Self-locking Beam Trolleys Pacific Adjustable Angle Clamps Pacific Top Girder Clamps
INSTRUCTION MANUAL Pacific Self-locking Beam Trolleys Pacific Adjustable Angle Clamps Pacific Top Girder Clamps IMPORTANT Please read this instruction manual before using these products. This manual contains
More informationOperating and Maintenance Manual. for. HADEF overhead crane. as jointed crane TA
5.52.714.00.1.0 Edition 03.2004 GB Operating and Maintenance Manual for HADEF overhead crane as jointed crane TA Subject to changes. 1 HADEF Table of Contents 1 General Page 3 2 Product description Page
More informationB&W Trailer Hitches 1216 Hawaii Road / PO Box 186 Humboldt, KS P: F:
B&W Trailer Hitches 1216 Hawaii Road / PO Box 186 Humboldt, KS 66748 P:620.473.3664 F:620.473.3766 NOTE: We recommend reading instructions before beginning the installation. GM OEM Mount System Slider
More informationVEHICLE POSITIONING JACK
VEHICLE POSITIONING JACK Model No: VPJ300 PART NO: 7624100 OPERATING & MAINTENANCE INSTRUCTIONS GC06/12 INTRODUCTION Thank you for purchasing this CLARKE Vehicle Positioning Jack. Before attempting to
More informationBattery Charger JCB-FCH20LI2
Safety and operating manual Battery Charger JCB-FCH20LI2 ORIGINAL INSTRUCTIONS SAFETY INSTRUCTIONS WARNING: Read all safety warnings and all instructions.failure to follow the warnings and instructions
More informationCertificate of Incorporation (Typical)
Certificate of Incorporation (Typical) Declaration We Varley Pump Limited hereby declare that the following machinery has been designed to be safely incorporated into other machinery and must not be put
More informationCPCS renewal test factsheet
CPCS renewal test factsheet Introduction to the CPCS renewal test The industry-led CPCS Management Committee has determined that key safety-related knowledge must be checked on each category prior to the
More information50 TONNE HYDRAULIC PRESS MODEL NO: CSA50FP
50 TONNE HYDRAULIC PRESS MODEL NO: CSA50FP PART NO: 7615202 OPERATION & MAINTENANCE INSTRUCTIONS WARNING: Read these instructions before using the press GC0516 INTRODUCTION Thank you for purchasing this
More informationGuidance to Installers of Viridian EV Charging Stations
Guidance to Installers of Viridian EV Charging Stations Iss 6 - Jul 2016 Page 2 of 9 This guide is intended to instruct in the proper installation of a Viridian EV Charging Station. Please note that when
More informationLOG SPLITTER. Heavy Duty PTO Driven. Owners Illustrated Instruction Book & Parts List
LOG SPLITTER Heavy Duty PTO Driven Owners Illustrated Instruction Book & Parts List Grovebury Road, Leighton Buzzard, Bedfordshire. LU7 4UX. UK. Tel:01525 375157. Fax:01525 385222. Email: enquires@brownsagricultural.co.uk
More information2¼ TONNE TROLLEY JACK
2¼ TONNE TROLLEY JACK Model No: CTJ2250LP PART NO: 7623070 OPERATING & MAINTENANCE INSTRUCTIONS GC01/12 INTRODUCTION Thank you for purchasing this CLARKE Trolley Jack. Before attempting to use this product,
More informationHYDRAULIC BENCH PRESS 50,000kg
OWNER S MANUAL PRODUCT CODE: 2037T HYDRAULIC BENCH PRESS 50,000kg Working Capacity Height Width Depth Weight 50,000kg 1660mm 1220mm 800mm 236kg Made in China to TQB Brands Pty Ltd specifications WARNING
More informationREDEXIM-BLEC BOX-GRADER 1800 / LASER- GRADER Serial number: User Manual and Parts Book. Original manual
User Manual and Parts Book REDEXIM-BLEC BOX-GRADER 1800 / LASER- GRADER 1800 Serial number: Kwekerijweg 8 3709JA Zeist The Netherlands Tel.: (31)30-6933227 Fax: (31)30-6933228 Email: verti-drain@redexim.com
More informationModel 3770 WARNING. Failure to comply with the safety information in these instructions could result in serious injury or death.
B&W Trailer Hitches 1216 Hawaii Road / PO Box 186 Humboldt, KS 66748 P:620.473.3664 See Limited Lifetime Warranty at F:620.869.9031 bwtrailerhitches.com/warranty NOTE: We recommend reading instructions
More informationLIFTING EQUIPMENT lift tables HIW RANGE. Ergox hygraulic single scissor lift tables PRODUCT SPECIFICATIONS
LIFTING EQUIPMENT lift tables HIW RANGE Ergox hygraulic single scissor lift tables PRODUCT SPECIFICATIONS HIW Range Ergox hygraulic single scissor lift tables FEATURES High pressure cylinder with dual
More informationRev. 10/27/2015 CDL-2000, MANUAL
VESTIL MANUFACTURING CORP. 2999 North Wayne Street, P.O. Box 507, Angola, IN 46703 Telephone: (260) 665-7586 Toll Free (800) 348-0868 Fax: (260) 665-1339 www.vestilmfg.com e-mail: sales@vestil.com CDL-2000
More informationSafelift Overhead Runway Beams & Rolling Beam Cranes
Operation & Maintenance Instructions Instructions for Safe Use Safelift Overhead Runway Beams & Rolling Beam Cranes Certification Safelift overhead runway beams and rolling beam cranes are lifting appliances
More informationFontaine Fifth Wheel Instructions. Armor Yard Truck
The only fifth wheel designed specifically for yard trucks Fontaine Fifth Wheel Instructions Armor Yard Truck Pre-service and operation Coupling instructions Inspection & maintenance FOR YOUR SAFETY USE
More informationHYDRAULIC PALLET TRUCK MODEL NO: PT540M/BM/CM & PT685BM/CM PART NO: , , , ,
HYDRAULIC PALLET TRUCK MODEL NO: PT540M/BM/CM & PT685BM/CM PART NO: 7631700, 7631705, 7631710, 7631715, 7631720 OPERATION & MAINTENANCE INSTRUCTIONS LS0316 INTRODUCTION Thank you for purchasing this CLARKE
More information