HYPRO. ProFlo. Nozzle Bodies with Superior Durability and High Flow Rates
|
|
|
- Edwina Thompson
- 5 years ago
- Views:
Transcription
1 HYPRO ProFlo Nozzle Bodies with Superior Durability and High Flow Rates
2 HYPRO ProFlo Wet boom clamp sizes: 1 2, 3 4, 1, 20mm, 22mm, 25mm Turret-indexing design for improved consistency Comes standard with an 8 PSI (.55 bar) diaphragm check valve 2.6 gpm (9.84 L/min) with a 5 psi (.34 bar) pressure drop Available with an EPDM or Viton Seal Available with dry boom mounting tab FEATURES Three turret styles for an easy change of spray tips: single, 3-way, and 5-way Provides lowest pressure drop at any given flow in the industry 2.6 gpm (9.84 lpm) with a 5 psi (0.34 bar) pressure drop Available in wet or dry boom versions Positive shutoff between each spray position Custom logos available upon request (minimum quantities apply) BENEFITS Designed to deliver the highest flow rates across the spraying pressure range Unique DCV (diaphragm check valve) design reduces restrictions in the flow path, enabling 2.6 gpm (9.8 lpm) with a 5 psi (0.34 bar) pressure drop through the nozzle Supports faster field speeds with the same coverage and supports direct fertilizer application through the nozzle body DCV flow path Turret-indexing design provides improved consistency and reliability throughout the life of the nozzle body eliminating free spinning and seizing problems seen on competitive nozzle bodies Bayonet style attachment allows for automatic spray alignment using flat fan spray tips Compact design makes mounting easier with less potential interference with the spray boom structure ProFlo nozzle bodies come standard with an 8 psi (.55 bar) diaphragm check valve. 4 psi (.27 bar), 12 psi (.82 bar), 20 psi (1.37 bar), and 25 psi (1.72 bar) DCVs are available as options ProFlo Nozzle Body Performance Curve Pressure drop (bar) Flow (gal/min) Flow (l/min) Viton is a registered trademark of DuPont Pressure drop (psi)
3 Wet Boom Nozzle Bodies 3 & 5-Way Nozzle Bodies (no tab for boom clamp) Viton/Green Turret (to clamp on) Pipe Size Options 1 2" 3 4" 1" 20mm 25mm N-B N-B N-B N-B N-B N-B N-B N-B N-B N-B N-B322V 4223N-B323V 4223N-B324V 4223N-B327V 4223N-B328V N-B522V 4223N-B523V 4223N-B524V 4223N-B527V 4223N-B528V Sold in Quantities of 100; Sold as single units through HYPRO-EU only (Cambridge, UK) For Individual Bags, Add Suffix -00 (i.e.: 4223N-B322-00) 3 & 5-Way Nozzle Bodies with Tab for Boom Clamp Viton/Green Turret (to clamp on) Pipe Size Options 1 2" 3 4" 1" 20mm 25mm N-B N-B N-B N-B N-B N-B N-B N-B N-B N-B N-B322V 4243N-B323V 4243N-B324V 4243N-B327V 4243N-B328V N-B522V 4243N-B523V 4243N-B524V 4243N-B527V 4243N-B528V Sold in Quantities of 100; Sold as single units through HYPRO-EU only (Cambridge,UK) For Individual Bags, Add Suffix -00 (i.e.: 4243N-B322-00) Triple Nozzle Bodies for Wet Boom 4222N-B N-B N-B324 Description 1 2" split clamp 3 4" split clamp 1" split clamp Single Drop Nozzle Body for Wet Boom (to clamp on) Pipe Size 1 2" 3 4" 1" 20mm 25mm 4221N-B N-B N-B N-B N-B128 Viton/Green 4221N-B122V 4221N-B123V 4221N-B124V 4221N-B127V 4221N-B128V Acid resistant polypropylene available with 1 clamp and EPDM Seal. part number: P 1 4 FNPT Outlet- Substitute B with F (i.e.: 4221N-F122) Sold in Quantities of 300; Sold as single units through HYPRO-EU only (Cambridge,UK) For Individual Bags, Add Suffix -00 (i.e.: 4221N-B122-00) Wet Boom Single Nozzle Bodies-No Diaphragm Check Valve Single hose barb P/N 4201N-B " Clamp 4201N-B " Clamp 4201N-B104 1" Clamp Add Sufix -00 for 1 part per retail bag 2
4 Dry Boom Nozzle Bodies 3 & 5-way Nozzle Bodies with Tab for Boom Clamp and Hose Barb for Dry Boom Viton/Green Sold in Quantities of 100 For Individual Bags, Add Suffix -00 (i.e.: 4263N-B323S-00) Turret Options 3 4 " (19 mm) Single Ended HB 3 4 " (19 mm) Double Ended HB 1" (25 mm) Single Ended HB 1" (25 mm) Double Ended HB N-B323S 4263N-B323D 4263N-B324S 4263N-B324D N-B523S 4263N-B523D 4263N-B524S 4263N-B524D N-B323SV 4263N-B323DV 4263N-B324SV 4263N-B324DV N-B523SV 4263N-B523DV 4263N-B524SV 4263N-B524DV Hose Barb Triple Nozzle Bodies-with DCV Seal Options/ 4242N-B300 -Provides 1/4 MNPT Inlet Single hose barb P/N Double hose barb Triple hose barb P/N P/N 4242N-B322S 4242N-B322D 4242N-B322T 1 2" 13 mm 4242N-B323S 4242N-B323D 4242N-B323T 3 4" 19 mm Hose Barb Dry Boom Nozzle Bodies-with DCV Seal Options/ Add Prefix ''BG-" for 1 part per retail bag Single hose barb P/N Double hose barb Triple hose barb P/N P/N 4241N-B121S 4241N-B121D 4241N-B121T 3 8" 10 mm 4241N-B122S 4241N-B122D 4241N-B122T 1 2" 13 mm 4241N-B123S 4241N-B123D 4241N-B123T 3 4" 19 mm Hose Barb Dry Boom Nozzle Bodies-with Top-Mounted DCV Seal Options/ Add Prefix ''BG-" for 1 part per retail bag Single hose barb P/N Double hose barb P/N 4240N-B121S 4240N-B121D 3 8" 10 mm 4240N-B122S 4240N-B122D 1 2" 13 mm 4240N-B123S 4240N-B123D 3 4" 19 mm Single Nozzle Bodies with DCV 11/16" UNF 3/8 (10 mm) HB 1/4" MNPT x 1/4" FNPT 1/4" MNPT x Bayonet Seal Options/ x Bayonet x Bayonet 4 PSI (.28 BAR) 8 PSI (.55 BAR) 25 PSI (1.72 BAR) 4 PSI (.28 BAR) 8 PSI (.55 BAR) 8 PSI (.55 BAR) 8 PSI (.55 BAR) 4240N-F N-F N-F N-B N-B N-B120U QT14-1-NDC Viton/Green 4240N-F110V 4240N-F120V 4240N-F150V 4240N-B010V 4240N-B020V - - Hose Barb Dry Boom Nozzle Bodies-No DCV Single hose barb P/N Double hose barb P/N Triple hose barb P/N 4231N-B101S 4231N-B101D 4231N-B101T 3 8" 10 mm 4231N-B102S 4231N-B102D 4231N-B102T 1 2" 13 mm 4231N-B103S 4231N-B103D 4231N-B103T 3 4" 19 mm 3
5 Accessories & Parts Hose Barb Dry Boom Nozzle Bodies-No DCV Type Clamp Size Hose Barb N Single 1 2" Pipe 1 2" 13 mm N Single 3 4" Pipe 3 4" 19 mm N Single 3 4" Pipe 1" 25 mm N Single 1" Pipe 3 4" 19 mm N Single 1" Pipe 1" 25 mm N Double 1 2" Pipe 1 2" 13 mm N Double 3 4" Pipe 3 4" 19 mm N Double 3 4" Pipe 1" 25 mm N Double 1" Pipe 3 4" 19 mm N Double 1" Pipe 1" 25 mm Replacement Check Valve (DCV) includes Flynut, Housing and Spring Spring Pressure Plunger Reference Color 4 PSI (.28 BAR) Orange 8 PSI (.55 BAR) Black 12 PSI (.83 BAR) Yellow 20 PSI (1.38 BAR) Gray 25 PSI (1.72 BAR) Blue Red Green V V V V V Red housing indicates for use with EPDM Seals. Green housing indicates for use with Viton Seals. Note: Diaphragms are sold separately Replacement Diaphragm Seal Options for check valves Option Color Reference EPDM E Black Viton V Green Replacement Seal/O-ring Kit ProFlo Body Description/Material Contains all internal seals/epdm V Contains all internal seals/viton Replacement Nozzle Body Stem Seals Description/Material mm Wet Boom Stem Seal-EPDM mm Wet Boom Stem Seal-Viton Screw, Nut & Stem O-ring Kit V Description/Material Contains replacement screw, nut and stem o-ring/epdm Contains replacement screw, nut and stem o-ring/viton 1 Cobra Clip Boom Pipe Mounts 2 Reference Number Description " or 25mm Nominal Boom Pipe Mount " or 32mm Nominal Boom Pipe Mount w/keep Strap " or 40mm Nominal Boom Pipe Mount w/keep Strap Black Polypropylene Boom Pipe (Undrilled) - Schedule Sections Nominal Pipe Size Pipe Length Wall Thickness Wall Tolerance Outside Diameter Max. Operating 73º F/22.8º C Metric Metric Units Units PSI BAR 8034-F-00PP ft 6.1 m mm F-00PP 1 20 ft 6.1 m mm F-00PP ft 6.1 m mm Wet Boom Blanks Material Description Nylon 3 4 Pipe Nylon 1 Pipe P* Polypropylene 3 4 Pipe P* Polypropylene 1 Pipe * Comes standard with Viton o-ring Viton is a registered trademark of DuPont. 4
6 Accessories Hose Drops Length Description Outlet, Inlet cm 1 4 NPT, UN(M) cm 1 4 NPT, UN(M) cm 1 4 NPT, Quick Attach Fitting cm 1 4 NPT, Quick Attach Fitting V cm 1 4 NPT, Quick Attach Fitting with Viton V cm 1 4 NPT, Quick Attach Fitting with Viton Series 404 Swivel and Threaded-Swivel Nozzle Bodies Description 4200N-0020 Single Swivel 1 4 FNPT X Quick Attach 4200N-0021 Double Swivel 1 4 FNPT X 2 Quick Attach 4200N-0023 Single 1 4 FNPT X UN(M) 4200N-0024 Double 1 4 FNPT X UN(M) 4200N-0025 Red Retaining Cap UN(F) 4200N-0026 Black Retaining Cap UN(F) Quick Fitting Adapters Reference # Part # Description Packaging N 1 4" BSP x Quick Attach None N 1 4" MNPT x Quick Attach None N º Double Elbow w/gasket 10/ Bag, Priced Individually N º Elbow x Quick Attach 10/ Bag, Priced Individually " FNPT x Quick Attach None 5 CPV007 3/8 HB x 1/4 FNPT w/ Boom clamp None 6 BG N 1 4" FNPT x Quick Attach 1/Bag Vari-Spacing Clamps Material Piping/Tubing O.D * Steel 3 4 (26.7 mm) Round Pipe (1.050 ) * Steel 1 (33.5 mm) Round Pipe (1.315 ) * Steel (42 mm) Round Pipe (1.660 ) Steel 3 4 (19 mm) Square Tubing Steel 1 (25 mm) Square Tubing Steel (32 mm) Square Tubing Steel (38 mm) Square Tubing Stainless Steel (38 mm) Square Tubing * By pipe, dimensions refer to I.D. (inner diameter) Add Prefix ''BG-" for 1 part per retail bag ProFlo Dry Boom Clamps with Slot for Easy Assembly- Boxes of 100 Material Piping/Tubing O.D zinc plated steel 3/4" (14 mm) square tubing zinc plated steel 1" (25 mm) square tubing zinc plated steel (32 mm) square tubing zinc plated steel 1-1 2" (38 mm) square tubing SS 304 stainless steel 3/4" (19 mm) square tubing SS 304 stainless steel 1" (25 mm) square tubing SS 304 stainless steel (32 mm) square tubing SS 304 stainless steel 1-1 2"(38 mm) square tubing Add Prefix ''BG-" for 1 part per retail bag 5
7 11/16 Accessories " UN Nozzle Bodies Reference Standard Description Nylon Part Poly Part Number Pack Number Number " - 16UN(M) X 1 4" (6 mm) HB Elbows NTL14 3NTL " - 16UN(M) X 3 8" (10 mm) HB Elbows NTL38 3NTL " - 16UN(M) X 1 2" (13 mm) HB Elbows NTL12 3NTL " - 16UN(M) X 5 8" (16 mm) HB Elbows NTL58 3NTL " - 16UN(M) X 3 4" (19 mm) HB Elbows NTL34 3NTL " - 16UN(M) X 3 8" (10 mm) HB Tees NTT38 3NTT " - 16UN(M) X 1 2" (13 mm) HB Tees NTT12 3NTT " - 16UN(M) X 5 8" (16 mm) HB Tees NTT58 3NTT " - 16UN(M) X 3 4" (19 mm) HB Tees NTT34 3NTT " - 16UN(M) X 3 8" (10 mm) HB Crosses T38C 3T38C " - 16UN(M) X 1 2" (13 mm) HB Crosses T12C 3T12C " - 16UN(M) X 3 4" (19 mm) HB Crosses T34C 3T34C " - 16UN(M) X 3 8" (10 mm) HB Nozzle Shanks Straight 38D 338D " - 16UN(M) X 1 2" (13 mm) HB Nozzle Shanks Straight 3812D 33812D " - 16UN(F) X 1 4" (6 mm) FNPT Female Spray Tip Adapter NF1614 3NF " - 16UN(M) X 1 4" (6 mm) MNPT Nipples NB1614 3NB " - 16UN(M) X 1 2" (16 mm) MNPT Nipples NB1612 3NB " FNPT X 11 16" - 16UN(M) Ball Check Valve for nozzle fittings (10 PSI/.69 BAR) NBC10 Includes B12/3B12 nut Add Prefix BG- for 1 part per retail bag Add Prefix 5BG- for 5 parts per retail bag UN Nozzle Body Cap and Nut Reference Number Standard Pack Description Nylon Poly " - 16UN(F) Nozzle blank cap 3942* 33942* " - 16UN(F) Nozzle cap for tip/barb 8027* 38027* " (6 mm) HB for cap K8414 3K " (10 mm) HB for cap K8438 3K " (13 mm) HB for cap K8412 3K " - 16UN jamb nut B12* 3B12* * Fits all nozzle fittings with male straight thread Steel Boom Clamps for use with 11/16 Nozzle Bodies BC34R* BC100R* BC100 BC114 * Dimensions refer to I.D. (inner diameter) Description 3 4 (26.7 mm) Round Pipe 1 (33.4 mm) Round Pipe 1 (25 mm) Square (32 mm) Square 6
8 375 5TH AVE NW, NEW BRIGHTON, MN PHONE: CUSTOMER SERVICE: FAX: Because we are continuously improving our products and services, Pentair reserves the right to change specifications without prior 2015 Pentair Ltd. All Rights Reserved. FORM 446 (02/15) Printed in USA
HYPRO Mobile Equipment Solutions
HYPRO Mobile Equipment Solutions Anti-Icing, De-icing, and Roadway Applications W W W.HYPROSPR AY TIPS.COM Page 1 Bed Sprayer Diagram Manual Ball Valves Gas Engine Driven Centrifugal Pump Electric Valves
HYPRO Fence End Row Guide
HYPRO Fence End Row Guide How to Build Your End/Fence Row: Step-by-Step Guide for 1 Boom Piping W W W.HYPROSPR AY TIPS.COM Introduction The purpose of this guide is to give you step by step instruction
ProFlo Nozzle Bodies and Accessories... Page 185. Line Strainers... Page 200. Spray Guns... Page 202. Flowmeters... Page 205
Accessories ProFlo Nozzle Bodies and Accessories... Page 185 ProCap Tank Lids and Tank Accessories... Page 194 Cleanload Chemical Eductor... Page 198 Line Strainers... Page 200 Spray Guns... Page 202 Flowmeters...
Nozzle Bodies & Accessories
Nozzle Bodies & Accessories Don t waste anymore time or chemicals out in the field. Upgrade your nozzle bodies to drip-free or add more to your existing boom with these TeeJet and Hypro nozzle bodies.
Multiple Nozzle Body Assemblies for Dry Booms
Multiple Nozzle Body Assemblies for Dry Booms QJ350 Compact Nozzle Body for Dry Booms n Compact design means easier mounting and less interference with boom structure. n Available with 3 or 5 spray positions
Multiple Nozzle Body Assemblies for Dry Booms
Multiple Nozzle Body Assemblies for Dry Booms QJ350 Compact Nozzle Body for Dry Booms n Compact design means easier mounting and less interference with boom structure. n Available with 3 or 5 spray positions
Low Pressure Series - Accessories. High Pressure Series - Accessories
Low Pressure Series - Accessories STCO 50 Low Pressure Variable Spray Gun - Bronze Max. Pressure: 0Bar(50PSI) Inlet: /2 FBSP Max. Flow: 6GPM(23Lt/Min) 60 C(40 F) STCO 50-SS Low Pressure Variable Spray
TEEJET SWIVELS & 45 NOZZLES BODIES
TEEJET SWIVELS & 45 NOZZLES BODIES 45 QUICKJET Poly construction Self aligning tip cap Accepts standard twist lock cap, tip & screen Max 125 PSI In MPT Out 5699 1/4" Twist Lock 45 Poly construction nozzle
SUPERIOR WET SEAL PROTECTION for Today s Most Demanding Spraying Conditions
HYPRO FORCEFIELD SUPERIOR WET SEAL PROTECTION for Today s Most Demanding Spraying Conditions I HYPRO.PENTAIR.COM HYPRO 9310 Series ForceField Centrifugal Pumps Superior Wet Seal Protection Features & Benefits
ACCESSORIES & FITTINGS 800 SERIES CONTROL VALVES
ACCESSORIES & FITTINGS 800 SERIES CONTROL VALVES 8 VALVE FITTING PART NUMBERS 2" & 3" PRESSURE REDUCING VALVES* 10645 8970-002 (9526-006) 1/4" tube (9526-006) Flow 8970-001 (9526-001) 8970-010 (9526-010)
VALVES. FIMCO Code # MFG Part # std $ fp $ fp $
97 VALVES std = standard port fp = full port POLY BOLTED STAINLESS STEEL BOLTS, NUTS & WASHERS Size 5143361 60540 1/2 fp $ 29.29 5143362 60541 3/4 fp $ 29.29 5143363 60542 1 std $ 29.29 5143364 60543 1
Shaft Adapter (5/8 to 3/4 ) NOTE CI = Cast Iron, N = Ni-Resist, SL = Silver Last. Series Series 7560
Your One Stop Shop for Parts Hypro Roller Pumps Ideal for Farm Sprayers, Pest Control and Chemical Application Usage. Housings available in Cast Iron, Ni-Resist or Silver Series Self priming operation;
Parts and Accessories
Parts and Accessories For a full list of available pressure washer parts and accessories, visit www.landa.com. 1150 Davis Road, Suite J Elgin, IL 60123 (800) 788-8867 info@lorchem.com www.lorchem.com Hypro
Shaft No. of Part # Old No. Model No. Housing Rotation dia Rollers Seals. NOTE: CI = Cast-Iron, N = Ni-Resist, SL = Silver Last
Hypro Roller Pumps Ideal for farm sprayers, pest control and chemical application usage. Housings available in cast-iron, Ni-resist or silver series Self-priming operation; roller pumps should not be run
INDEX 16
INDEX 16 SPRAYING ACCESORIES IDK and ID NOZZLES List 7 IDK and ID nozzles offer air induction technology for excellent coverage particularly in drift prone applications. Available in a range of ISO
VALVES std $ fp $ fp $
std = standard port POLY BOLTED STAINLESS STEEL BOLTS, NUTS & WASHERS fp = full port Code No. Part No. Size Price 5143361 60540 1/2 fp $ 29.29 5143362 60541 3/4 fp $ 29.29 5143363 60542 1 std $ 29.29 5143364
HANDGUNS SPRAYING SYSTEMS NO. AA18-AL SPRAYING SYSTEMS NO. AA143-AL HEAVY DUTY TYPE ROTATING HANDLE CONTROL
PRO SERIES SPRAYING SYSTEMS NO. AA18-AL HANDGUNS 3PT SKID HEAVY DUTY TYPE ROTATING HANDLE CONTROL Handle rotates 360 to operate spray gun valve from shutoff to maximum flow position. As handle is turned,
Roller Pump Comparisons
Roller Pump Comparisons Get up to 10 times longer pump life with Hypro Silver Series XL Roller pumps! These three pump housings were photographed after being tested with a 30:1 mix of water and Roundup
Owner's Manual. Model: ( ) (150 Gallon, 5.5 HP Skid Sprayer) Technical Specifications. General Information. Warranty/Parts/Service
Owner's Manual Model: -0 (00) (0 Gallon,. HP Skid Sprayer) Technical Specifications General Information Thank you for purchasing this product. The purpose of this manual is to assist you in operating and
Multiple Nozzle Body Assemblies for Dry Booms
Multiple Nozzle Body Assemblies for Dry Booms QJ360C Nozzle Body Series for Dry Booms Available with either 3, 4 or 5 spray positions for easy change of spray tips or quick boom flushing. Positive shutoff
DIAPHRAGM PUMPS & ACCESSORIES
VOLUME 17A DIAPHRAGM PUMPS & ACCESSORIES FOR AGRICULTURAL SPRAYERS AND FLUID TRANSFER APPLICATIONS EVERFLOPUMP.COM 1-800-864-1649 Polypropylene Pump Housing and Valve Plate Zinc Plated Steel Fasteners
55-Gallon Powder Drum Truck
Instruction Sheet P/N 0 0 -Gallon Powder Drum Truck for Bulk-Feed Powder Transfer Systems Description See Figure. The -gallon powder drum truck automatically adds bulk powder to a powder coating system
NOZZLE BODIES, VALVES & STRAINERS 2015 Sales Conference Monday Breakout Session 3
NOZZLE BODIES, VALVES & STRAINERS 2015 Sales Conference Monday Breakout Session 3 QJ370 NOZZLE BODY 2015 Sales Conference 2015 QJ370 Series Nozzle Body QJ373-1-NYB QJ375-1-NYB QJ370 Assembly QJ370 Offers:
GUNJET NUMBER AA143-AL-*-10 A C A C
For spot spraying, tree spraying, livestock spraying and power washing at pressures from 2 to 55 bar. To operate spray gun, handle is rotated 360 from shutoff to maximum flow position. As handle is turned,
50 GALLON LAWN & GARDEN SPRAYER
2/04 AS2002, Rev 0 Dethmers Manufacturing Company DOING OUR BEST TO PROVIDE YOU THE BEST 0 GALLON LAWN & GARDEN SPRAYER OWNER/OPERATOR MANUAL ASSEMBLY CALIBRATION OPERATION REPLACEMENT PARTS READ complete
DUO REACT TWO OUTLET NOZZLE BODY SYSTEM
HYPRO DUO REACT TWO OUTLET NOZZLE BODY SYSTEM FEATURES & BENEFITS Electro- (Leader) Supports increased speed range while maintaining droplet size control and optimizing spray efficacy Automatically switches
Reservedele Parts Catalogue November 2015
Reservedele Parts Catalogue November 2015 Distribution: Impact is a trademark (TM) belonging to Linemark UK. E. Marker A/S Okslundvej 8, Bov DK-6330 Padborg Tel.: +45 74 67 08 08 E-mail: info@emarker.dk
Sprayer Products Booklet
Sprayer Products Booklet 2018 Edition 2330/2334 www.oxbo.com SECTIONS Index PAGE NUMBER Price List 1 Filter Kits 2 Hypro Spray Tips 3 Miller Enhancement Kits Bypass Valve Kit 4 In Line Flow Meter 4 Boom
Set-Up Instructions. for EC-VM400. Motorized Valves
Set-Up Instructions for EC-VM400 Motorized Valves Published by: Spraying Devices, Inc. P. O. Box 3107 Visalia, CA. 93278-3197 USA Tel: (559)SDI-5555 Fax: (559)SDI-5591 email: sales@sprayingdevices.com
Spray Guns. Choice of Materials and Capacities
For spot spraying, tree spraying, livestock spraying and power washing at pressures from 30 to 800 PSI. To operate spray gun, handle is rotated 360 from shutoff to maximum flow position. As handle is turned,
TEEJET VARI-SPACING NOZZLES
PRO SERIES TEEJET VARI-SPACING NOZZLES For use with all interchangeable Spray Tips For operating pressures up to 125 p.s.i. TeeJet Vari-Spacing Nozzles permit the construction of spray booms with adjustable
Available in aluminum only. SETTING C STRAIGHT STREAM SPRAY. Maximum Horizontal Throw
Type 43L & 43H GunJet Spray Guns AA43 GunJet Designed and built for heavy-duty service. Stem extends through extension to valve seat located directly behind orifice disc for drip-free shutoff and instant
Owner's Manual. (60 Gallon 3 Point Sprayer w/pump, Coupler, & 7-Nozzle Boom Assembly) Assembly. Information About The Sprayer
Owner's Manual (0 Gallon Point Sprayer w/pump, Coupler, & -Nozzle Boom Assembly) Assembly Most of the sprayer has been assembled at the factory. Join the center boom member to the carrier frame with the
Gear Driven, Cast Iron
Gear Driven, Cast Iron Series 9000C-O CENTRIFUGAL PUMPS Kynar is a registered trademark of Arkema, Inc. Desmopan is a registered trademark of Bayer Aktiengesellschaft, Farbenfabriken. Viton is a registered
AGRICULTURE PRODUCTS CATALOG
HYPRO SHURflo AGRICULTURE PRODUCTS CATALOG Pumps, Mini-Bulk Transfer Systems & Accessories WWW.HYPROPUMPS.COM SHURflo offers a complete line of pumps and accessories to meet the needs of homeowners, hobbyists,
Mur-lok. Mur-lok Polypropylene Quick-Connect Fittings & Valves. Check Valves. Fixed NPTF 90 Elbows. Check Valve Elbow. Swivel NPTF 90 Elbows
Polypropylene Quick-Connect Fittings & Valves Polypropylene Quick-Connect Fittings & Valves G.A. Murdock offers the largest selection of polypropylene quick-connect fittings and valves on the market. These
Spray Pressure Control Manifold
Instruction Sheet P/N 0870G0 WARNING: Allow only qualified personnel to perform the following tasks. Follow the safety instructions in this document and all other related documentation. Introduction The
Replacement Parts for: Sprayer Woods Equipment Company/TISCO All rights reserved. tiscoparts.com TEL: FAX:
Replacement Parts for: Sprayer 2014 Woods Equipment Company/TISCO All rights reserved. tiscoparts.com TEL: 800-338-0145 FAX: 800-356-5487 Replacement Parts for Sprayer Table of Contents 2 Pumps... 3-19
Gauge Retail Display Packaging 4 80 Series Amonia Gauges 9 Mini Chrome-Brass Valves 30 T-Bolt Clamps 35
FLUID COMPONENTS 2 Gauge Retail Display Packaging 4 80 Series Amonia Gauges 9 Mini Chrome-Brass Valves 30 T-Bolt Clamps 35 Custom Logos & Dials 4 Sight Gauge 10 Butterfly Handle Brass Ball Valve 31 Sealants
Silver Selection Trailer Sprayers Specification Sheet
SVT0055L0077ZB2 SVT0095L0077ZB2 55 & 95 litre Zero Turn Mower Trailers Unit Specifications Item Details Tank Pump Pressure Regulator Filter 55 Litre 95 Litre Delavan 12 volt (7.5 L/min 60psi) UV stabilised
AY-SS Trigger Adapter AA46
98 98 Choice of Materials Spray and Capacities Guns For spot spraying, tree spraying, livestock spraying and power washing at GunJet pressures Number from AA2Spray 30 to 800 Guns PSI. To Length operate
Spray Pressure Control Manifold
Instruction Sheet P/N 0870-0 WARNING: Allow only qualified personnel to perform the following tasks. Follow the safety instructions in this document and all other related documentation. Introduction The
450FB and 460FB Flow Back Manifolds
450FB and 460FB Flow Back Manifolds The 450FB and 460FB flow back valves allow pressure from the boom lines to be relieved back to the tank when the valve is switched to the off position. Available with
Pump Parts and Fittings
12volt NorthStar Pumps The NorthStar NSQ Series 12V On-Demand Diaphragm Pump is a premium-quality on-demand diaphragm pump that upgrades your sprayer with innovative components and engineering for superior
Roll Length (Feet) 6300 Polyethylene Pipe
IRRIGATION Item # Description Tube Length Unit 6291 24" Per Aqua Turret Complete 6293 30" Per Set (comes with pre-cut 6295 36" Per tubing, brass insert & 6297 48" Per aqua turret) 6299 60" Per 6274 Aqua
TEEJET VARI-SPACING NOZZLES
4 TEEJET VARI-SPACING NOZZLES For use with all interchangeable Spray Tips For operating pressures up to 125 p.s.i. TeeJet Vari-Spacing Nozzles permit the construction of spray booms with adjustable nozzle
FLUID COMPONENTS - SPRAYER ACCESSORIES - AG PARTS PRESSURE WASHER ACCESSORIES - POWER EQUIPMENT
www.valleyind.com TOLL FREE 1-800-864-1649 CATALOG 219A FLUID - SPRAYER - AG PARTS PRESSURE WASHER - POWER EQUIPMENT VALLEY INDUSTRIES CATALOG 219A FLUID 4 Gauge Retail Display Packaging 4 Gauge Accessories
Owner's Manual. Model: SK-61-4R ( ) (60 Gallon Skid Sprayer w/2.5 H.P. Engine, 4-Roller Pump, Deluxe Handgun) Technical Specifications
Owner's Manual Model: SK--R (0) (0 Gallon Skid Sprayer w/. H.P. Engine, -Roller Pump, Deluxe Handgun) Technical Specifications. H.P. Recoil Start Engine Roller Pump - G.P.M. Pressure Relief Valve Pressure
funnels, measures, gravity cocks, jerry cans and oil suction pumps...
funnels, measures, gravity cocks, jerry cans and oil suction pumps lubrication AND ACCESSORIES grease nipples............................................................ GREASE CONNECTORS........................................................
Model: 300-3PT-GEM ( ) (300 Gallon 3-Point Sprayer w/8-row Boom & No-Drip Nozzles)
Owner's Manual Model: 00-PT-GEM (000) (00 Gallon -Point Sprayer w/-row Boom & -Drip zzles) Assembly Instructions General Information Thank you for purchasing this product. The purpose of this manual is
VALVES POLYPROPYLENE STYBBY BALL VALVES POLYPROPYLENE 3-WAY BALL VALES. Fax Toll-Free
EPDM- seals Full-Port EPDM- seals Full-Port Viton seals Full-Port POLYPROPYLENE SINGLE UNION BALL VALVES PARTS NO. FPT SIZE MAX. PSI MP-S301200PP 1/2" 240 MP-S301250PP 3/4" 240 MP-S301320PP 1" 240 MP-S301400PP
Inverted Dual High-Pressure Fluid Filter Assemblies
Instruction Sheet P/N 1093-04 Inverted Dual High Pressure Fluid Filter Assemblies Introduction WARNG: High pressure fluids are hazardous. To prevent serious injury when installing and servicing filters,
Inverted High Pressure Fluid Filters
Instruction Sheet P/N 33290-03 Description See Figure. Nordson high-pressure fluid filters prevent nozzle-plugging by filtering contaminants out of coating materials. These stainless steel, wall-mounted
DIGIFLO ELECTRONIC FLOWMETER
DIGIFLO ELECTRONIC FLOWMETER PIPE FITTING INSTALLATION MANUAL SADDLE MACHINED IN-LINE BODY MOLDED IN-LINE BODY MOLDED TEE Blue-White R Industries, Ltd. F-2000 Page 2 1.0 Temperature vs. Pressure Temperature
B Style Electric Motors and Valves
Style Electric Motors and Valves Shutoff/ontrol Motors oom ontrol motors are 22 RPM for 344 series (0.7 second shutoff valves) and 25 RPM for 346 and 356 series (0.6 second shutoff valves) for 12 VD systems.
CJ Series Flat Spray Nozzles For Air & Saturated Steam CJ The following description will help to explain our Part Number/ Code in relation to the SPRAYTECH Spray Nozzle. EXAMPLE ORDERING. SPRAYTECH CJ
CAPS & CONNECTORS. Rubber Caps (Special Heat Resistant EPDM Rubber) Ford - GM - Chrysler NYLON CONNECTORS
Sec.1 Sec. 10 CAPS & CONNECTORS Vinyl Vacuum Caps Can be used for capping lines and hoses while testing carburetors, emission control systems, vacuum lines etc. Color coded for size identification. Fits
MODEL NO & UP MODEL NO & UP MODEL NO & UP MODEL NO & UP
MODEL NO. -900 & UP MODEL NO. 00-900 & UP MODEL NO. 0-900 & UP MODEL NO. 0-900 & UP SKID SPRAYER FORM NO. 99-055 REV. B SET-UP AND PARTS LIST Refer to the illustrated Parts List for the details of parts
Super 700 Series Sprinkler
I n s t a l l a t i o n I n s t r u c t i o n s Super Series Sprinkler Introduction The versatile Super Series Sprinkler is designed to meet a wide range of applications in both residential and commercial
A200-2 INCH AIR OPERATED DOUBLE DIAPHRAGM PUMP
A200-2 INCH AIR OPERATED DOUBLE DIAPHRAGM PUMP A200 2 PUMP 2 ALUMINUM NPT or BSP Connections Zinc Plated Hardware Non-Metallic Muffler Suction Center Front / Discharge Center Rear Standard Porting SPECIFICATIONS
Parts Manual FRONT-FOLD BOOMS MODELS 80, 90 & 100 HYDRAULIC FOR TA1200 & TA1600 SPRAYERS. Serial Number B & Higher. Part No.
Parts Manual FRONT-FOLD BOOMS MODELS 80, 90 & 100 HYDRAULIC FOR TA1200 & TA1600 SPRAYERS Serial Number B30970200 & Higher Part No. 408920 Front-Fold Booms 80 / 90 / 100 Introduction Foreward This symbol
Car Wash / Pressure Washer
Car Wash / Pressure Washer PARTS & ACCESSORIES Proudly distributed by: We have many representatives in all 50 states. Give us a call to locate the one nearest you! Custom manufacturing available... ask
Silver Selection Sprayers Specification Sheet
SVS0055L0077 SVS0095L0077 SVS0150L0077 SVS0225L0077 12 Volt Sprayers with Delavan 7.5l/min 60psi Pumps Unit Specifications Item Details Tank Pump Pressure Regulator Filter 55 Litre 95 Litre 150 Litre 225
HIGH PRESSURE SPRAYERS
S S STRAIGHT THROUGH QDS FITTINGS AND SWIVELS NOZZLES SPRAY GUNS AND WANDS 337 NOZZLES QUICK DISCONNECT NOZZLE 0-degree red tip nozzle, 15-degree yellow tip nozzle, 25-degree green tip nozzle, 40-degree
Sec. 11 NYLON CONNECTORS
Sec. 11 NYLON CONNECTORS 12946 Connector 5/16" x 5/16" 1/8 1/8 12916 12919 12921 12938 Connector 3/8" x 1/4" 1/8 12924 1/4" 12934 Connector 3/8" x 3/8" 18835 (E1ZE-9E499-EA) Nylon 1/8 12926 17629 12922
PRO-II SERIES SAND MEDIA FILTRATION SYSTEMS Kits and Parts Listing
PRO-II SERIES SAND MEDIA FILTRATION SYSTEMS Kits and Parts Listing TABLE OF CONTENTS Assembling Components...page 8" Tanks & Tank Kits... " & " Dia. Tank & Tank Kits... Manifold Kits 6", 8" & 0"... 5-5
Fertigation. Injectors AirJection Injectors Suction and Bypass Kits Parts & Accessories FERTIGATION FERTIGATION
Fertigation Injectors...207 AirJection Injectors...209 Suction and Bypass Kits...210 Parts & Accessories...211 205 206 Injectors Injector Product Range - Models and Kit Assemblies Injector Model Numbers
A200-2 INCH AIR OPERATED DOUBLE DIAPHRAGM PUMP
A200-2 INCH AIR OPERATED DOUBLE DIAPHRAGM PUMP A200 2 PUMP 2 ALUMINUM NPT or BSP Connections Zinc Plated Hardware Non-Metallic Muffler Suction Center Front / Discharge Center Rear Standard Porting 2 STAINLESS
Professional Grade Agricultural Pumps.
Professional Grade Agricultural Pumps. 1 Delavan knows what HD Magnum PowerFLO PowerMAX 2 you need out of a pump. Turbo-90 RollerPRO 3 Sizing, Selection & Plumbing Diagrams How to Determine Pump Capacity
TL960 PARTS MANUAL. Fuel Section. Page 9-1. Fuel 09/97
Fuel Section Fuel Page 9-1 Fuel Tank Between The Rails Page 9-2 Fuel Fuel Tank Between The Rail Item Part Num. Number Qty. Description Notes 1 61360662 1 Elbow, 90 o, 1/2" NPT x 5/8" T 2 61270100 1 Sender
GUNS & LANCES. Legacy AP1000 Trigger Guns. MV 920 Gun. Linear Trigger Guns. M407 Trigger Gun. Giant Trigger Guns. Your One Stop Shop for Parts
Legacy AP1000 Trigger Guns The World s most popular and easiest to repair trigger gun!!! PSI: 4500 Weight: 19 oz 9.802-229.0 353010 AP1000 8.710-414.0 353010W AP1000 Weep 8.704-157.0 109856 Unitized Valve
POST MIX DISPENSER RECTANGULAR DESIGN LOW PRESSURE FAUCET
SPARE PARTS CATALOG ENTERPRISES, INC. 706039: Model 872B 2LPF Post Mix Dispenser, Tall 706040: Model 872D 2LPF Post Mix Dispenser, Short POST MIX DISPENSER RECTANGULAR DESIGN LOW PRESSURE FAUCET 23-February-15
DEMA Pro-Fill I Sink Dispenser
DEMA Pro-Fill I Sink Dispenser MODELS PF651GAP, PF651AG, PF651GAP-1M, & PF651AG-1M Overview The PRO-FILL I Sink Dispenser mixes water with a cleaning chemical and dispenses the solution into holding containers
DEMA MODEL 692T FOAM STATION I INSTALLATION INSTRUCTION
1. PARTS CHECKLIST: ITEM DESCRIPTION QTY. A. Foam Station Assembly 1 B. #10 Screw & Anchor Kit Set (Total: 4 Screws & 4 Anchors) 1 C. Ceramic Weight 1 D. ¼ ID Tubing & Foot Valve Assembly 1 E. Metering
Fluid Dispensing Systems
Fluid Dispensing Systems Automotive Commercial Industrial Diesel Exhaust Fluid (DEF) Open Systems Drum and Tote Packages Lever Pump System EPDM seals for maximum chemical compatibility. Includes 1300-028
& PumpRight for PWM Control. Maximum Pump Flow and Application Rates. Max Flow GPM
396-001070 PumpRight Fertilizer System for John Deere GS2 2600 & GS3 2630 & PumpRight for PWM Control Maximum Pump Flow and Application Rates Number of Diaphragms Max Flow GPM Max GPA on 40 at 6 MPH Max
SST Series Sand Media Filtration Systems
SST Series Sand Media Filtration Systems Kits and Spare Parts Listing LS-695 (Rev. 6 / 07) Page 1 SST SAND FILTERS Installation Profile Automatic Systems WLS-594B(REV.11/03) Installation Configurations
P RECISION P ERFORMANCE EASY CALIBRATION PRECISE IS NICE FOR 35 YEARS. (352) Orange Lane Hawthorne, FL 32640
EASY CALIBRATION 1 - Set nozzle spacing & height 2 - Set uniform flow with pressure adjustment 3 - Set walking speed with metronome and stop-watch Speed control is the most important factor for a precise
HELPING YOU SPRAY BETTER SMARTER FASTER SAFER
HELPING YOU SPRAY BETTER SMARTER FASTER SAFER SMARTER PROSTOP-E FORCEFIELD SPRAY NOZZLES FASTER DUO REACT CLEANLOAD MAX SAFER EXPRESS BOOM EXPRESS END CAP CLEANLOAD PROSTOP-E FORCEFIELD SPRAY NOZZLES ForceField
S P R AY E R VA L V E S AND C O N T ROL S C AT A L OG
Q UA L I T Y VA LV E S A N D C O N T R O L S. TO D AY A N D TO M O R R O W. Texas Industrial Remcor, Inc. CATALOG NO. 33 The new RC2 control system: Ensures no potential leaks in the tractor cab when using
R.E. SKILLINGS SUPPLIES, INC or PAGE -22 CAM LOCK FITTINGS
R.E. SKILLINGS SUPPLIES, INC. 937-845-8781or800-358-8070 PAGE -22 CAM LOCK FITTINGS Stainless steel rings, arms & pins. Most complete line of polypropylene couplings available. Versatile interchangeable
Nylon Fluid Regulators
Instruction Sheet P/N 08880B Introduction The FR- and RA- nylon fluid regulators are patented, electrically non-conductive, air-operated, pressure regulators. Except for the body shape and fluid connection
BAG-IN-BOX. T5000 Series BIB Pumps are gas driven (CO2/air) diaphragm pumps that provide. Auto Shutoff for 5000 Series Pumps
T5000 Series BIB Pumps are gas driven (CO2/air) diaphragm pumps that provide superior performance and reliability for dispensing bag-in-box syrups, juice concentrate, teas, wines, and liquor. New air inlet
HOSES & LANCES. Hoses & Lances 15,000 PSI (1,034 BAR)
HOSES & LANCES Jetstream provides a full arrangement of hoses and flex lances for high pressure waterblasting. The hoses and lances are designed to be durable and reliable for any 15,000 psi application.
DEMA Pro-Fill II Sink Dispenser
DEMA Pro-Fill II Sink Dispenser MODELS PF652GAP, PF652AG, PF652GAP-2M, & PF652AG-2M Overview The PRO-FILL II Sink Dispenser mixes water with cleaning chemicals and dispenses these solutions. This unit
& PumpRight for PWM Control. Pump Models & Flow Capability. Max Flow GPM
PumpRight Fertilizer System for AFS Pro 700 And Planter ECU & PumpRight for PWM Control Number of Diaphragms 396-3292Y1 AFS Pro 700 and Planter ECU Pump Models & Flow Capability Max Flow GPM Max GPA on
Section H Spray Guns. Table of Contents
Section H Overview You re sure to find a solution for your cleaning and rinsing needs in our comprehensive line of hand-held spray guns. Options range from a gentle spray to a high-impact solid stream.
Circulation Kits for CP Pumps
Instruction Sheet P/N 08000C Description This instruction sheet covers two circulation kits for CP Pumps: Stainless steel circulation kit, with Viton O-rings Stainless steel circulation kit, with EPR O-rings
ARAG Modular Manual Valve Operating Instructions and Parts Manual
ARAG Modular Manual Valve Operating Instructions and Parts Manual Form L-1478 (11/12, Rev. C) Description California Proposition 65 Warning -- This product and related accessories contain chemicals known
Residential R.O. components
Residential R.O. components WATER TREATMENT COMPONENTS 1,8 RESIDENTIAL CSM MEMBRANES 2015 10-01-01-EN 1,8 RESIDENTIAL CSM MEMBRANES Ref. Model Name RE1810-30 DA050A RE1810-50 RE1812-35 DA050 DA051 DA052
PORTABLE EXTRACTOR 500/500H ( ) 115V 230V
PORTABLE EXTRACTOR 500/500H (78-003 78-004) 115V 230V 500/500H TOP VIEW 03-00030 4 RIVET 3/16 X 1/2 AL/AL BLK AND 03-00204 1 RIVET - 3/16 X 5/8 TRI FOLD AL/AL 03-01547 1 WASHER FLAT.203 ID X.734 OD X.06
ProMax QuickJet Spray Nozzles. For trouble-free performance and fast maintenance. Experts in Spray Technology. Spray Nozzles.
Experts in Technology Nozzles Control Analysis Fabrication ProMax QuickJet Nozzles For trouble-free performance and fast maintenance Overview Quick-change spray technology ensures trouble-free performance
COUPLINGS. Series Page. Couplings HOSE
COUPLINGS Series Page DRAGON BREATH Steam Female Wing Nut...7610...186 DRAGON BREATH Steam Female Grip Nut...7613...186 DRAGON BREATH Steam Adapters & O-Ring Viton...761...187 Universal Type...7611...188
WATCH GUARD 440 SERIES FLOAT VALVES INSTALLATION INSTRUCTIONS MODELS: T, TX, T, BT,
WATCH GUARD 440 SERIES FLOAT VALVES INSTALLATION INSTRUCTIONS MODELS: 440-22T, 440-22TX, 440-23T, 440-23BT, 440-24 Overview The Watch Guard 440 Series of float valves fills and maintains fluids in reservoirs.
r i g b y t a y l o r Freefone igo Linemarking machine PARTS LIST
igo Linemarking machine PARTS LIST igo Advance Glider igo Mini Contents: Page 1: Nozzles, bayonet caps, and spray head filters. Page 2: The paint flow system parts. Page 3: Spray head assemblies: igo Advance,
MARCH Polyethylene Piping Systems.
MARCH 2017 Polyethylene Piping Systems www.plasson.com.au GLOBAL PRESENCE LOCAL COMMITMENT Get an expert on your team. Plasson has the widest range of compression, electrofusion, threaded and transitional
Owner's Manual. Model: ATV ( ) (25 Gallon Lawn & Garden/ATV Sprayer w/standard 7-Nozzle Boom Assembly) Technical Specifications.
Owner's Manual Model: ATV-5-700 (507) (5 Gallon Lawn & Garden/ATV Sprayer w/standard 7-zzle Boom Assembly) Technical Specifications 5 Gal. Corrosion-Resistant Polyethylene Tank Volt Diaphragm Pump,. g.p.m.
LUBRICATION & FLUID HANDLING ACCESSORIES. Heavy duty knurled steel barrel with large threads for easy loading.
hand grease guns Lever type The tough high pressure cast iron head makes Pro-Master Grease Guns unique in comparison to common pot metal or other die cast heads with a head burst pressure of 17,000 PSI
Disc Valve Hydraulic Motors 4000 Compact Series
Disc Valve Hydraulic Motors 10.2014 inspired hydraulics. Änderungen und Druckfehler vorbehalten 10.2014 EN EATON_Motoren english Port B Port A Features Shuttle Valve with Back- Pressure Relief Valve Highlights
SHOWER NOZZLES TABLE OF CONTENTS. ShowerJet One-piece, High-pressure. ShowerJet Disc-type. Lock Rings. NeedleJet Nozzles.
TABLE OF CONTENTS ShowerJet One-piece, High-pressure ShowerJet Disc-type Lock Rings NeedleJet Nozzles DiscJet Nozzles Self-Cleaning Nozzles page C3 C4 C5 C6 C8 C9 C1 QUICK REFERENCE GUIDE QUICK REFERENCE