» Fermentation and storage tank base tank FS-MO stacking tank AS-MO

Transcription

1 » Fermentation and storage tank base tank FSMO stacking tank ASMO The FSMO base tank is a typical, round, upright standing fermentation and storage tank made of high quality stainless steel. Together with the corresponding stacking tank AS MO, the FSMO has been satisfying our clients for decades. Being the allrounders they are, both tanks can be used for almost all kinds of applications and processes in the production of beverages. Our tanks live up to their promises: they all have perfect weld seams, an accurately sealing manhole and are all easy to clean. By default the tank top is executed in AISI 316. If you don t need to stack iediately: no problem! The base tank can be extended with a stacking tank also at a later date. Provided that the maximum total volume per stack is not exceeded, the two tanks can be combined without problems even when they are different sizes (see page 32). APPLICATION RANGE (PRESSURELESS) Fermentation Maturation Storage Mixing Processes Ideal for Wine Juice Must Spirits Nonalcoholic beverages Alcoholic beverages

2 28 29 STANDARD EQUIPMENT FOR BASE TANK FSMO / STACKING TANK ASMO Tank shell and tank bottom made of AISI 304 stainless steel, surface IIId (2R), marbled outside Tank top made of AISI 316 stainless steel, surface IIId (2R), marbled outside From tank of upwards with lifting lugs Tanks from tank height upwards and stacking tanks with ladder safety bow Vaulted, stable tank top with mouldedon forward upslope for complete filling and ventilation assuring a very small air contact area Moulded connection neck with filling and vent neck external thread NW 50 Rd 78 x 1/6" Freestanding base tank on three weldedon legs Stacking tank with three weldedon stacking legs SAMPLING Weldon thread NW 10 DIN with sealing cap (for the installation of sampling tap) MANOLE Stable manhole neck seamlessly moulded from the tank shell Up to 320 capacity 320 x 250 From 525 capacity upwards 420 x 320 Door with butterfly bow and hand wheel RACKING OUTLET Plain surface with drilled hole 48 (to hold flap valve Gr. 37 or weldon thread NW, NW 50 DIN 11851) Up to 320 capacity fixed racking outlet plain surface From 525 capacity upwards with weldedon reinforcing plate FILL LEVEL Weldon thread NW 10 DIN with sealing cap including fastening points on tank shell (for installation of fill level indicator) BOTTOM OUTLET Vaulted, stable tank bottom with integrally moulded forward downslope for complete draining with moulded connection neck, impeding suction effect with bottom outlet neck Up to NW DIN From NW 50 DIN Accesories Cooling and heating Pressure tanks Tanks for red wine Tanks for mixing, transportation and storage Closed tanks Open top tanks

3 SETUP EXAMPLE FOR BASE TANK FSMO / STACKING TANK ASMO Item Base tank FSMO1200 = approx. 1,267 Standard equipment as on page 29 FSMO1200 Stacking tank ASMO = 1,916, = 1,267 () + () + 1,916 () = 3,243, ges = 3,243 (), 80 (connection) + approx. (height compensation) = approx. 3,423 Standard equipment as on page 29 ASMO Sampling (page 182) With sampling tap NW 10 DIN x Racking outlet (page 178) With mounted flap valve Gr. 37 2x KA120I Fill level (page 1) Mounted fill level indicator NW 10 2x FS130 Bottom outlet (page 178) With butterfly valve NW 50 DIN x Temperature measurement (page 186) Bimetal dial thermometer, measuring range 20 C to + C Threaded sleeve with locking screw and cap nut NW 10 DIN x TM1C eating and cooling jacket for base tank (page 136) Double jacket A1 1,3 m² with welded gland thread G 1" for connection to available warm water / cold water source Version 1, Layout 15, connection position A1 1A1 eating and cooling jacket for stacking tank (page 136) Double jacket A1 1,3 m² with welded gland thread G 1" for connection to available warm water / cold water source Version 1, layout 15, connection position A1 1A1 Adjustable feet (page 190) With adjustable feet for tank legs ( = + approx. ) 46127

4 30 31 DIMENSIONS OF BASE TANK FS1MO, FSMO / STACKING TANK AS1MO, ASMO eight 80 eight eight eight eight Intermediate sizes available In case of a 10 shell height equates to = 5.30 tank volume In case of a 10 shell height equates to = 7.80 tank volume In case of a 10 shell height equates to = tank volume In case of a 10 shell height equates to = tank volume In case of a 10 shell height equates to = tank volume In case of a 10 shell height equates to = tank volume In case of a 10 shell height equates to = tank volume Maximum number of tanks per tank stack 1 x FSMO + 2 x ASMO Please respect the maximum total volume per tank stack. Legend = Tank height = Discharge height = Clearance height = In between height = Tank height stacking tank without legs = Installation height FSMO = Installation height ASMO = eight tank stack ges = Total height Pricing for intermediate sizes for intermediate sizes the price of the next larger size will apply (plus customization costs) Option: Tank contact parts made of AISI 316 stainless steel Surface IIId (2R), marbled outside on special request Brushed outer finish on special request Accesories Cooling and heating Pressure tanks Tanks for red wine Tanks for mixing, transportation and storage Closed tanks Open top tanks

5 BASE TANK FS1MO, FSMO / STACKING TANK AS1MO, ASMO: TANK Ø MM Tank 1 FSMO Tank 2 3 ASMO ,314 1,509 1,772 2, ,089 1,2 1,547 1,075 1,516 1,693 1,937 2,3 1, 1,523 1,696 1,9 FS1 MO FS MO FS MO FS MO FS MO AS1 MO AS MO AS MO AS MO Tank ; maximum total volume per tank stack 1,265 BASE TANK FSMO / STACKING TANK ASMO: TANK Ø MM Tank 1 FSMO Tank 2 3 ASMO ,050 1,250 1,550 2,200 2,350 2,500 1, 1,455 1,5 1,955 2,193 2,318 2,693 2,943 3,193 3,443 3, ,216 1,466 1,716 1,438 1,645 1,863 2,088 2,307 2,424 2,778 3,017 3, 3,499 3,9 1,4 1,665 1,882 2,106 FS MO 0650 FS MO 0850 FS MO 1050 FS MO 1250 FS MO 10 FS MO 1550 FS MO 1800 FS MO 2000 FS MO 2200 FS MO 2350 FS MO 2500 AS MO 0650 AS MO 0850 AS MO 1050 AS MO 1250 Tank ; maximum total volume per tank stack 2,500 BASE TANK FSMO / STACKING TANK ASMO: TANK Ø MM Tank 1 FSMO Tank 2 3 ASMO 1,300 1,550 2, 2,350 2,500 2,650 3, ,500 3,750 4,000 4,300 4,0 1,267 1,517 1,767 2,017 2,173 2,255 2,505 2,630 2,755 3,087 3,255 3,505 3,743 3,993 4,243 4,493 1,010 1, 1,510 1,7 1,916 1,998 1,579 1,775 1,9 2,201 2,329 2,414 2,642 2,758 2,874 3,186 3,346 3,5 3,813 4,054 4,297 4, FS MO FS MO FS MO FS MO FS MO FS MO FS MO FS MO FS MO FS MO FS MO FS MO FS MO FS MO FS MO FS MO 120 AS MO AS MO AS MO AS MO AS MO AS MO Tank ; maximum total volume per tank stack 3,0 The respective height is calculated as follows: = + +

6 32 33 BASE TANK FSMO / STACKING TANK ASMO: TANK Ø 1.0 MM 1,750 2,150 2,500 2,850 3,000 3,200 3,0 4,000 4,0 4,750 5, 5,500 5,850 6,300 6,0 2,300 2,800 3,300 3,800 4,200 4,800 5,200 5,800 6,200 6,0 7,200 7,0 8,200 8,0 9,200 9,0 10,000 1,293 1,543 1,793 2,043 2,281 2,373 2,531 2,781 3,031 3,281 3,531 3,769 4,019 4,269 4,519 4,769 Tank ; maximum total volume per tank stack 4,0 BASE TANK FSMO / STACKING TANK ASMO: TANK Ø 1.0 MM 1,347 1,597 1,7 2,097 2,335 2,585 2,835 3,085 3,335 3,585 3,823 4,073 4,323 4,573 4,823 5,073 5,311 5,561 1,042 1,292 1,542 1,792 2,030 2,122 Tank 1 FSMO Tank 2 3 ASMO 1,086 1,336 1,586 1,836 2,074 2,324 2,574 1,8 2,023 2,212 2,413 2,612 2,827 3,048 3,273 3,501 3,733 3,955 4,190 4,427 4,665 4,905 5,145 5,375 5,617 1,8 2,015 2, 2,6 2,5 2,822 3,043 FS MO FS MO1 0 FS MO FS MO FS MO FS MO FS MO FS MO FS MO FS MO FS MO1 FS MO FS MO1 70 FS MO1 0 FS MO1 80 FS MO FS MO1 90 FS MO 1 00 AS MO AS MO 1 0 AS MO AS MO AS MO AS MO AS MO Tank ; maximum total volume per tank stack 10,000 Since the legs of the stacking tank are welded with the top of the base tank only the entire tank stack can be purchased. This way, the size increases by 35 and size by 1. Up to 6,200 capacity with standard legs, from 6,0 upwards with boxed, closed legs. The respective height is calculated as follows: = + + 1,711 1,894 2,092 2,300 2,505 2,586 2,726 2,952 3,181 3,414 3,648 3,874 4,112 4,351 4,592 4,833 1,756 1,928 2,117 2,317 2,516 2,595 Tank 1 FSMO FS MO 1 10 FS MO FS MO FS MO FS MO FS MO FS MO FS MO 1 30 FS MO 1 00 FS MO 1 40 FS MO FS MO 1 5 FS MO FS MO FS MO FS MO 1 Tank 2 3 ASMO AS MO 1 10 AS MO AS MO AS MO AS MO AS MO Accesories Cooling and heating Pressure tanks Tanks for red wine Tanks for mixing, transportation and storage Closed tanks Open top tanks

7 BASE TANK FSMO / STACKING TANK ASMO: TANK Ø MM Tank 1 FSMO Tank 2 3 ASMO 2,0 3,000 3,0 4,200 4,800 5,500 6, 6,0 7,300 8, , ,200 12,800 13,500 14,000 14,0 15,300 1,369 1,619 1,869 2,119 2,357 2,7 2,857 3,107 3,357 3,7 3,5 4,095 4,345 4,595 4,5 5,095 5,333 5,583 5,833 6,083 6,333 6,583 1,110 1,3 1,610 1,8 2,098 2,348 2,598 2,8 3,098 3,348 3,586 3,836 4,086 2,007 2,171 2,350 2,541 2,732 2,9 3,154 3,373 3,596 3,823 4,041 4,272 4,506 4,741 4,977 5,215 5,443 5,682 5,923 6,164 6,7 6,649 2,006 2,168 2,346 2,536 2,726 2,933 3,147 3,366 3,588 3,815 4,032 4,264 4,497 FS MO180 0 FS MO FS MO FS MO FS MO FS MO FS MO FS MO180 FS MO FS MO FS MO FS MO FS MO FS MO FS MO FS MO FS MO FS MO FS MO FS MO FS MO FS MO AS MO AS MO AS MO AS MO AS MO AS MO AS MO AS MO 180 AS MO AS MO AS MO AS MO AS MO Tank ; maximum total volume per tank stack 12,500 Since the legs of the stacking tank are welded with the top of the base tank only the entire tank stack can be purchased. This way, the size increases by 30 and size by 180. Up to 8,000 capacity with standard legs, from 8,500 upwards with boxed, closed legs. The respective height is calculated as follows: = + +

8 34 35 BASE TANK FSMO / STACKING TANK ASMO: TANK Ø MM 3,000 3,800 4,0 5,300 6, 6,800 7,0 8,0 9,200 10,000 10,0 1 12,200 13,000 13,0 14,500 15,200 16,000 16,800 17,500 18,300 19,000 20,000 1,428 1,678 1,928 2,178 2,416 2,666 2,916 3,166 3,416 3,666 3,904 4,154 4,4 4,654 4,904 5,154 5,392 5,642 5,892 6,142 6,392 6,642 6,880 1,168 1,418 1,668 1,918 2,156 2,6 2,656 2,906 3,156 3,6 Tank ; maximum total volume per tank stack 16,300 Since the legs of the stacking tank are welded with the top of the base tank only the entire tank stack can be purchased. This way, the size increases by and size by 220. Up to 10,000 capacity with standard legs, from 10,0 upwards with boxed, closed legs. The respective height is calculated as follows: = + + 2,148 2,305 2,478 2,663 2,9 3,052 3,261 3,476 3,695 3,918 4,133 4,362 4,592 4,825 5,059 5,295 5,521 5,759 5,998 6,238 6,479 6,720 6,950 2,237 2,393 2,564 2,747 2,931 3,132 3,3 3,553 3,771 3,992 Tank 1 FSMO FS MO FS MO FS MO200 FS MO FS MO FS MO FS MO FS MO FS MO FS MO FS MO FS MO FS MO FS MO FS MO FS MO FS MO FS MO FS MO FS MO FS MO FS MO FS MO Tank 2 3 ASMO AS MO AS MO AS MO200 AS MO AS MO AS MO AS MO AS MO AS MO AS MO Accesories Cooling and heating Pressure tanks Tanks for red wine Tanks for mixing, transportation and storage Closed tanks Open top tanks