MAHATMA GANDHI INSTITUTE OF TECHNOLOGY Gandipet, Hyderabad

Transcription

1 MAHATMA GANDHI INSTITUTE OF TECHNOLOGY Gandipet, Hyderabad JNTUH REGISTRATION ID : NAME OF FACULTY: Dr. Ch. Kesava Reddy 3. DESIGNATION : Sr.Assistant Professor 4. YEARS OF EXPERIENCE : 17 Years 5. ID : kesavareddy@mgit.ac.in 6. UG DEGREE: B.E(Mechanical Engineering) 7. PG DEGREE: M.Tech (Thermal Engineering) 8. PH.D(AREA OF THE PH.D WORK): Internal Combustion Engines 9. SUBJECTS TAUGHT: Optimization Techniques, Non Conventional Energy sources, Engineering Drawing, Thermal Science, Fluid mechanics and Heat transfer, Automobile Engineering, Applied thermal Engineering-I, Applied thermal Engineering-II, Fluid mechanics and Hydraulic machinery 10. PAPER PUBLICATIONS IN INTERNATIONAL JOURNALS: May 2018, Experimental Investigation-Magnetic Assisted Electro Discharge Machining, IOP Con. Series, Material science and Engineering, ISSN: X,pp March 2018, Thermal Analysis of YZTP Coated Piston Crown,International Journal Of Creative Research Thoughts (IJCRT), e-issn: ,6(1),pp , UGC Journal(UGC ). 3. Feb 2018, Effect of low thermal conductivity materials on performance of Internal Combustion engine-a review and experimentation, International Organisation of Scientific Research(IOSR) Journal of Mechanical and Civil Engineering (IOSR- JMCE),e-ISSN: ,p-ISSN: X,15(1),pp87-94, Imapact Factor : Oct 2016, Effect of injection timing, pressure and preheating on exhaust emissions of ceramic coated diesel engine with Pongamia Biodiesel, International Journal of Current Engineering and Technology (IJCET), ISSN: ,6(5),pp , Imapact Factor : Sep 2016, Experimental Investigations on exhaust emissions of low heat rejection diesel engine with pongamia Biodiesel, International Journal of Application of Innovation in Engineering & Management (IJAIEM), ISSN: ,5(9),pp , Imapact Factor : Sep 2016, Experimental Investigations on Exhaust emissions of low heat rejection diesel engine with crude Mahua oil, International Journal of Thermal technologies, (IJTT), ISSN: ,6(3),pp ,Impact Factor:3.2

2 7. Sep 2016, Experimental Investigations on Performance parameters of semi adiabatic diesel engine with Mahua Bio diesel, International Journal of Application of Innovation in Engineering & Management (IJAIEM), ISSN: ,5(9),pp 32-44, Imapact Factor : Feb 2016, Studies on exhaust emissions and combustion characteristics of DI- Diesel engine with air gap insulation with varied injection timing and injector opening pressure, International Journal of Current Engineering and Technology (IJCET), E-ISSN ,6(1)pp: , Imapact Factor : Mar 2015, Effect of injection timing on performance parameters of Direct injection Diesel Engine with Air gap insulation, International Journal of Thermal technologies, (IJTT), ISSN: ,6(3),pp 9-17,IF: Feb 2015, Influence of Injector opening pressure on performance parameters of DI Diesel engine with three levels of insulation with Diesel operation, International Journal of Current Engineering and Technology (IJCET), E-ISSN ,5(1),pp 53-60, Imapact Factor : Feb 2015, Effect of injection timing on exhaust emissions and combustion charecterestics of Direct Injection Diesel engine with ceramic coated cylinder head, International Journal of Current Engineering and Technology (IJCET), E- ISSN ,5(1),pp 46-52, Imapact Factor : Dec 2014, Effect of injection timing on exhaust emissions and combustion characteristics of Direct injection Diesel engine with high grade insulated combustion chamber, International Journal of Application of Innovation in Engineering & Management (IJIAEM), ISSN: , Vol 3, Issue 12, PP , Imapact Factor : Dec 2014, Effect of injection timing on performance parameters of direct diesel engine with ceramic coated cylinder head, International Journal of Scientific Engineering Research(IJSER), ISSN: , Vol5, Issue12, PP , Thomson Reuters, Index Copernicus. 14. Dec 2014, Experimental Investigations on DI Diesel engine with different Combustion chambers Insulation, British Journal of Applied Science & Technology (BJAST), ISSN: , 6(3),PP , Science Domain,Thomson Reuters,copernicus index. 15. May 2014, Effect of sorret and magnetic field on unsteady flow of a radiating and chemical reacting fluid, International academy of science, Engineering and Technology,(IASET-IJME),ISSN: , 3(3),pp 1-11, Impact Factor:4.9395,Copernicus index, Thomson Reuters. 16. Dec 2013, ComparativePerformance of a crude pongamia oil in a low heat rejection Diesel engine, International Organisation of Scientific Research(IOSR) Journal of Mechanical and Civil Engineering (IOSR-JMCE),e-ISSN: ,p- ISSN: X,10(3),44-55, Imapact Factor : June 2013, Performance, Exhaust Emissions and Combustion Characteristics of Mohr oil based Bio-diesel in a Medium Grade Low Heat Rejection Diesel Engine, International Journal of Automotive Engineers and Technologies (IJAET),ISSN: , 2(2),pp 70-84, Copernicus index,, Imapact Factor : 2.0.

3 18. May 2013, Performance, Exhaust Emissions and Combustion Characteristics of Mohr oil based Bio-diesel in a Medium Grade Low Heat Rejection Diesel Engine International Journal of Science,Engineering and Technology Research, (IJSETR),ISSN: , 2(5),PP , Copernicus index. 19. Apr 2013, Performance, Exhaust Emissions and Combustion Characteristics of Mohr oil in crude form and Bio-diesel form in a Medium Grade Low Heat Rejection Diesel Engine, International Journal of Engineering Research and Development(IJERD), (IJSETR),ISSN: X, 6(8),pp 58-70, UGC Approved Journal (UGC-4739),Copernicus index. 20. Apr 2013, Studies on performance of ceramic coated diesel engine with Fueled With crude Mohr oil, TI Journals-International Journal of Engineering Sciences, (IJES),ISSN: , 2(4),PP Feb 2013, Comparative performance of ceramic coated diesel engine with mohr oil in crude and biodiesel form, International Journal of Engineering and Advanced Technology, (CSIR), ISSN: , 2(3), PP (Impact factor=1.0). 22. Nov 2012, Performance evaluation of mohr oil based biodiesel in low grade low heat rejection diesel engine, International Journal of Innovative Research in Science, Engineering and Technology, (IJIRSET), ISSN: , 1(1), PP 80-94, (Impact factor=7.08). 23. June 2012, Performance evaluation of a low heat rejection diesel engine with mohr oil based biodiesel, British Journal of Applied Science & Technology, ISSN: , 2(2), PP , Science Domain,Thomson Reuters,copernicus index. 24. June 2012, A comparative study of the performance evaluation of a low heat rejection engine with three different levels of insulation with crude pongamia oil operation, Canadian Journal on Mechanical Sciences & Engineering, 3(3), pp May 2012, Performance evaluation of a medium grade low heat rejection diesel engine with mohr oil based Bio diesel, International Journal of Recent Advances in Mechanical Engineering (IJMECH),(Australia),ISSN: ,1(1),PP Apr 2012, Control of oxides of nitrogen emissions from high grade low heat rejection diesel engine with crude pongamia oil by catalytic reduction, International Journal of Advanced Scientific Engineering & Technological Research (IJASETR),(Australia),ISSN: , 1(2),Article No-2, April, PP 10-25, Impact factor= Sep 2012, Performance evaluation of a high grade low heat rejection diesel engine with crude pongamia oil, International Journal of Engineering Research and Applications (IJERA), ISSN: , 2(5), PP , UGC Approved Journal (UGC-4525),Copernicus index. 28. Sep 2012, Comparative performance of different versions of the low heat rejection diesel engine with mohr oil based bio-diesel, International Journal of Research & Reviews in Applied Sciences (IJRRAS), ISSN: X, 1(1), PP

4 29. Jan 2012, Performance evaluation of a low grade low heat rejection diesel engine with crude pongamia oil, International Scholarly Research Network (ISRN) Renewable Energy (USA), ISSN: , Article ID pp 1-10.(Impact factor=2.0). 30. Dec 2011, Potential of a low heat rejection diesel engine with crude pongamia oil, International Journal of modern Engineering Research(IJMER),ISSN: ,Vol 1, Issue 1, PP , ISO:3297:2007,copernicus index,impact Factor: PAPER PUBLICATIONS IN INTERNATIONAL CONFERENCES : Nov 2017, Experimental Investigation-Magnetic Assisted Electro Discharge Machining, International Conference on Recent advances in Materials and Manufacturing Technology, at BITS Pilani, Dubai Campus, Dubai,UAE,28 th to 29 th Nov Oct 2016, Effect of injection timing,pressure and Preheating on Exhaust emissions of Diesel engine with air gap insulated combustion chamber with Pongamia biodiesel, Recent Trends In Engineering, Science and Technology (ICRTPNFE- 2016)),Elsevier Energy Procedia Proceedings pp ,Department of Mechanical Engineering,St.Peter s engineering college, IFHE, Hyderabad.25 th to 27 th October, Hyderabad. 3. Sep 2016, Experimental Investigations on performance parameters of semi adiabatic Diesel engine with crude Mahua oil, Recent Trends In Engineering, Science and Technology (ICRTPNFE-2016)),Elsevier Energy Procedia Proceedings pp ,Department of Mechanical Engineering,St.Peter s engineering college, IFHE, Hyderabad.25 th to 27 th October, Hyderabad. 4. Sep 2016, Performance and emission evaluation of a crude pongamia oil in a low heat rejection Diesel engine, Emerging Trends In Mechanical Engineering (ICTiME 2016),23 to 24 th September2016, Proceedings of International conference, pp ,Department of Mechanical Engineering of Faculty of Science and Technology, IFHE, Hyderabad. 5. Sep 2016, Android controller based Automatic oil dispensing, Emerging Trends In Mechanical Engineering (ICTiME 2016),23 to 24 th September2016, Proceedings of International conference, pp ,Department of Mechanical Engineering of Faculty of Science and Technology, IFHE, Hyderabad 12. PAPER PUBLICATIONS IN NATIONAL CONFERENCES : Feb 2018, Investigation of Di-DieselEngine with LHR Combustion chambers with alternative fuels, Recent Trends in Mechanical Engineering(NCRTME-18),Feb 26-27,2018 at JNTUH College of Engineering(Autonomous),Hyderabad Dec 2014, CFD Analysis on Heat transfer and Pressure drop characteristics of a corrugated louvered fin and flat tube compact heat exchanger, National conference on Relevance of English, Mathematics and management Sciences to Technical courses (REMMT-2014), Mahatma Gandhi Institute of Technology Hyderabad.

5 3. Dec 2014, Design of connecting rod of internal combustion engine: optimization approach, Mathematical modelling in science and Engineering, Department of Mathematics & Humanities, MGIT, Hyderabad. 13. BOOKS PUBLISHED: 06 Published a text book of Thermal Engineering - I, Sure publications, Hyderabad, 2004 Published a text book of Thermal Engineering - II, sure publications, Hyderabad, 2004 Revised Edition of Thermal Engineering II, Sure publications-2006 Published a Text book of 4-Stroke Compression ignition Engine noise using different blends of Pongamiaoil, Lambert Academic Publishing,Germany,U.K, ISBN: ,Jan Published a Text book of Design and Analysis of Axial Flow Fans, Lambert Academic Publishing, Germany,U.K, ISBN: , April 2018 Published a Text book of Design Analysis and Fabrication of Piston on CNC Machine, SIA omni Scriptum Publishing (Scholars Press), Lativa, European Union, ISBN: ,,April Published a Text book of Structural and Thermal Analysis of Silver coated Piston crown, SIA omni Scriptum Publishing (Scholars Press), Lativa, European Union, ISBN: , May CONTRIBUTIONS AT THE DEPARTMENTAL LEVEL: Thermal Engineering and Heat Transfer lab inchrage, Time Table in-charge 15. CONTRIBUTIONS AT THE COLLEGE LEVEL: Convener for various committees. 16. REFRESHER COURSES/ WORKSHOPS/CONFERENCES ATTENDED: 1. An Intensive course on Environmental studies organized by Srinidhi Institute of Technology, Hyderabad, 31 st November th December A Short term training programme on Robotics & Automation System organized by Mahatma Gandhi Institute of Technology, Hyderabad, 2 nd 7 th June A National Workshop on Surface modifications and its applications in industry organized by MJ Engineering College, Hyderabad, 18 th 20 th December International Conference on Applications on IC Engines organized by JNTU, Hyderabad during Dec One week Short term training programme on Mechatronics organized by Institute of Engineers (India), during June 16-20th 2008, Hyderabad. 6. Attended a One week workshop on STTP on Mechatronics at M.G.I.T, Gandipet, Hyd during 12th 16th July Attended One week Faculty Development Programme on Alternate Energy Options for I.C. Engines organized by National Institute of Technology, Calicut

6 sponsored by Ministry of HRD during 28 June 03 July, Attended Two week ISTE Workshop on Thermodynamics in Mechanical Engineering conducted by IIT, Bombay from June, Attended a One day Seminar on Innovation and Technology for Sustainable development (Sponcered by IIPC-AISTE,New Delhi) Organised by Department of Physics and Chemistry held at MGIT,Hyderabad during 12 th April Attended AICTE Sponsored Two week FDP Recent advances in Manufacturing automation and Simulation conducted by Dept. of Mechanical Engg, CBIT from May Attended Powder metallurgy association of India and Department of metallurgy,mgit Sponsored One week Short term course on Powder Metallurgy conducted by Dept. of Mechanical Engg, MGIT from DEC 18 to 22, Attended a One day International Conference on Advanced trends in IC engines and Combustion workshop at JNTUH, Kukatpally, Hyderabad during 28 Feb One week Short term training programme on Mechatronics organized by ISTE- SRM STTP, (ISTE,New Delhi and SRM University,Chennai), at MGIT,Hyderabad, during May 5 th -10 th 2014, Hyderabad. 14. Attended Faculty development Programme on Project Management from an Industry Perspective held on 8 th march 2014 at M.G.I.T,Hyderabad. 15. Worked as Co-convener for IGNITO 15, Department of Mechanical Engineering (Mechatronics) MGIT,Hyderabad 16. Attended one week Faculty development Programme on Finete Element Applications in Mechanical and Civil Engineering (Sponsored by Tequip-II) at CBIT, Hyderabad, during January 23-28, Attended National workshop on Alternative Liquid Fuels in IC Engines (ALFICE-17) organized by Department of Mechanical Engineering (Sponsored by Tequip-II) at CBIT, Hyderabad, during February 17-18, Attended Two weeks Faculty development Programme on Current trends in materials and manufacturing (Organized by CMR group of Institutions) at Department of Mechanical Engineering, CMR College of Engineering and Technology, Medchal, Hyderabad, during May 15-27, Attended Two weeks Faculty development Programme on Recent Advances in Design and Development of Mechatronics & Robotic Ststems at Department of Mechanical Engineering, Mahatma Gandhi Institute of Technology, Gandipet, Hyderabad, during Dec 4 th to16 th, Attended one week Faculty development Programme on Computational Fluid Dynamics & its Applications in Mechanical Engineering (Sponsored by Tequip-III) at JNTUH, Hyderabad, during April 23-27, MEMBERSHIP OF PROFESSIONAL BODIES : 05 Life Member - Indian Society for Technical Education - LM31795 Life Member Indian society of theoretical and applied mechanics - LM 808 Life Member Indian society for Heat and Mass transfer - LM-834

7 Life Member - International Association of Engineers, Hong Kong-LM Life Member The Combustion Institute Indian Section (CI-IS) LM 1233