expertltljverlag. Automotive Powertrain Control Systems K I Ci U Dipl.-lng. Wilfried Nietschke Dipl.-lng. Oliver Predelli (ed.)
|
|
- Patrick Lambert
- 5 years ago
- Views:
Transcription
1 Automotive Powertrain Control Systems Electronics on the Move Dipl.lng. Wilfried Nietschke Dipl.lng. Oliver Predelli (ed.) and 107 CoAuthors With 258 Figures and 25 Tables expertltljverlag. K I Ci U
2 Contents Inhalt Foreword Vorwort A novel adaptive ATracking Approach for automotive Transmission Control Systems 1 Peter Loepelmann, Bernhard Baker 2 Turbocharger Speed Detection via On Board Acoustic Emission Analysis 17 Federico Covassin, Matteo de Cesare, Ludovico Ausiello 3 Sound Actuators in Passenger Cars 30 Stephan Krell, Jan Oberthur 4 Vehicle propulsion control unit architecture for Patrick Leteinturier 5 On Board Indicated Torque Evaluation from Instantaneous Engine Speed Measurement 58 Matteo De Cesare, Federico Stola, Stefano Sgatti 6 Virtual Sensors for Controlling a Diesel Engine 72 Marco Decker, Clemens GUhmann, Jurgen Nobis 7 Exact Multivariate Air Charge Control on a Spark Ignition Engine 92 Robert Beckmann, Wolfgang Drewelow, Bernhard Lampe, Peter Dunow, Nick Weinhold, Matthias Schultalbers 8 Flexible, Configurable Control Unit: Optimization of data calibration 106 Rainer RShrle, Helmut Bentele, Franz Krauss 9 Dynamic Friction Modeling for DCMotors 119 Steffen Buchner, Arvid Amthor, Stephan Zschack, Christoph Ament, Mike Eichhorn 10 Chip simulation of automotive ECUs 129 Jakob Mauss, Matthias Simons
3 A Improving 11 Certification of Exhaust Gas Cleaning Systems for maritime applications 137 Fabian Kock 12 vatl Virtual Turbocharger on the Basis of Physical Models: Faster Calibration Processes with Deeper System understanding 155 Mehdi Nakhjiri, Peter F. Pelz, Berthold Matyschok, Andreas Horn 13 Turbocharger control method for internal combustion engine 170 Marco Panciroli, Francesco Alunni, Stefano Sgatti, Laura Alunno 14 Adaptation of the Injection Control Valve for PiezoDriven Diesel Servo Injectors 183 Matthias Scheid, Janos Radeczky, Joachim Engelmann 15 Thematic Focus: Diesel Common Rail Injection Quantity Control based on Injector Internal Signals 191 Jost Kraufi, Steffen Meyer, Thomas Pauer, Holger Rapp, Markus Ruckle, Wolfgang Stocklein 16 LSU Adv Robustness For Use Upstream of Turbochargers 203 Andreas Bausewein, Florian Stadler, Marc Rosenland 17 Start/stopsystems and strategies in conjunction with a 48Vsystem 215 Michael Timmann, Martin Renz, Tommy Eisenhardt 18 Predicting and Optimizing Driving Range with Predictive Power Train Management and DriverAssist Systems in Electric Vehicles 231 Andreas Freuer, Michael Grimm, HansChristian Reuss 19 Predictive control systems in heavyduty commercial vehicles 257 Bernhard Haas 20 Advances in Exhaust Temperature Sensing and their Applicability for Diesel Emission Diagnostics 265 J6m Bullert, Dave Culbertson, Sanhong Zhang, Bharath Byranahalli Shankarlingaiah, James Pidgeon, Gordon Parker, Jeffrey Naber 21 Efficient soot raw emission modelling for Diesel engine control units 281 Enrico Neumann, Daniel Eckhardt, Eckhard Stolting, Ralf Gratzke
4 proceeding 22 OBD and service diagnosis for powertrain systems challenges and solutions from a supplier point of view 296 Walter Lehle, Jens Leideck, Markus Willimowski 23 Structure of a torque path for electric vehicles (EV) 313 Thomas Demuth, Harald Guillani, Vincent SchulteCoerne, Michael Neuner 24 MercedesBenz Hybrid Parallel Hybrid in Combination with Diesel Engine 318 Uwe Keller, Norbert Ruzicka, Stefan Schmiedier, Konstantin Neiss, Martin Hermsen, Jutta Schneider, Christian Enderle 25 Process and signalbased methods of fault detection and diagnosis in today's gasolineengine injection systems 337 Kevin Bilinski, Michael Grimm, HansChristian Reuss 26 OnBoard Diagnostics for HeavyDuty Diesel 349 Peter Subke, Martin Sirch 27 Concept for scheduling of calibration processes embedded in a system for self tuning of engine management systems 357 Sven Meyer 28 Virtual Engine as a Tool for Modelbased Calibration: GDI Engine Case Study 375 Rita Di Gioia, Domenico Papaleo, Massimo Vicchi, Nicold Cavina 29 A Uniform Concept for the Reliable Calibration of High Performance Position Controllers for Various Intake System Actuators 389 Stefan Kopf, Matthias Feldt, Ulrich Konigorski, Mike Eichhorn 30 Industrial use of HIL Engine Management System validation 398 Dirk von Wissel, JeanMarie Quelin, JeanMalo Basset, Joao Serra 31 Use of Rapid Prototyping and Closed loop Simulation within the development of complex control algorithms 409 Jiirgen Dingl, Klaus Uebel, Ronald Siedel, Thomas Offer, Mark Pastoor, Maciej Mickiewicz, Matija Bogdanic 32 ISO compliant Verification and Validation Concept for an Automatic Transmission Patrick Schmitt, Martin Spanninger, Dhanasekaran Selvarajan, Michael Ziegler, HansChristoph Wolf 424
5 Die 33 Flexibles Rapid Control Prototyping fur die Steuerung von Hybrid und Elektrofahrzeugen 433 Holger Ross, Frank Mertens 34 A quasistatic simulation tool for the design and optimization of hybrid powertrains 444 Alessandro Casalova, Gianfranco Gagliardi, Walter Nesci, Giovanni Prodi 35 Use of Simulation for the Calibration of Engine Electronic Control Units 465 Marcus Boumans, Ingo Hein, Tobias Lang, Wolfgang Lengerer The Authors Autoren
Electronic Engine Controls Subscription Methods of Pressure Cycle Processing for Engine Control Nonlinear Analysis of
Electronic Engine Controls Subscription 2003-01-0352 Methods of Pressure Cycle Processing for Engine Control 2003-01-0354 Nonlinear Analysis of Combustion Engine Vibroacoustic Signals for Misfire Detection
More informationPROJECT WORK. NAME Engine base calibration process. TUTORs Amorese Stefano. JOB POSITION Engine calibration test bench engineer
Engine base calibration process TUTORs Amorese Stefano Engine calibration test bench engineer 1) Development of base engine calibration data: Performance optimization (maximum torque and power levels,
More informationModel-Based Design and Hardware-in-the-Loop Simulation for Clean Vehicles Bo Chen, Ph.D.
Model-Based Design and Hardware-in-the-Loop Simulation for Clean Vehicles Bo Chen, Ph.D. Dave House Associate Professor of Mechanical Engineering and Electrical Engineering Department of Mechanical Engineering
More informationAutomotive and transportation. Magneti Marelli
Automotive and transportation Product Simcenter International automotive supplier reduces controls validation effort by 50 percent with Simcenter Amesim Business challenges Develop controls strategies
More informationMoBEO: Model based Engine Development and Calibration
MoBEO: Model based Engine Development and Calibration Innovative ways to increase calibration quality within the limits of acceptable development effort! Dr. Prakash Gnanam, AVL Powertrain UK Ltd 1 25
More informationDLR s Free Piston Linear Generator FPLG Development of an Innovative Linear Power Unit
DLR s Free Piston Linear Generator FPLG of an Innovative Linear Power Unit Florian Kock September 8, 2015 www.dlr.de Slide 1 > Kock > FKLG > 2015-09-08 FPLG Project Overview A Decade of Linear Power 2002
More informationCombining Optimisation with Dymola to Calibrate a 2-zone Predictive Combustion Model.
Combining Optimisation with Dymola to Calibrate a 2-zone Predictive Combustion Model. Mike Dempsey Optimised Engineering Design Conference 2016 Claytex Services Limited Software, Consultancy, Training
More informationModel-Based Engine Calibration
Model-Based Engine Calibration International Automotive Conference 15 June 2004 Dr David Sampson The MathWorks 2003 The MathWorks, Inc. Model-Based Calibration: Outline The concept Example applications
More informationCalibration. DOE & Statistical Modeling
ETAS Webinar - ASCMO Calibration. DOE & Statistical Modeling Injection Consumption Ignition Torque AFR HC EGR P-rail NOx Inlet-cam Outlet-cam 1 1 Soot T-exhaust Roughness What is Design of Experiments?
More informationTHE FKFS 0D/1D-SIMULATION. Concepts studies, engineering services and consulting
THE FKFS 0D/1D-SIMULATION Concepts studies, engineering services and consulting r e s e a r c h i n m o t i o n. VEHICLE IN MOTION On the basis of constant engine speeds and loads, the combustion engine
More informationIC Engine Control - the Challenge of Downsizing
IC Engine Control - the Challenge of Downsizing Dariusz Cieslar* 2nd Workshop on Control of Uncertain Systems: Modelling, Approximation, and Design Department of Engineering, University of Cambridge 23-24/9/2013
More informationFive Cool Things You Can Do With Powertrain Blockset The MathWorks, Inc. 1
Five Cool Things You Can Do With Powertrain Blockset Mike Sasena, PhD Automotive Product Manager 2017 The MathWorks, Inc. 1 FTP75 Simulation 2 Powertrain Blockset Value Proposition Perform fuel economy
More informationStructure-borne Noise Based Diesel Engine Control
RESEARCH Controlling AUTHORS Structure-borne Noise Based Diesel Engine Control Sebastian Schneider, M. Sc. is Research Assistant at the Chair of Energy Conversion Systems for Mobile Applications (EMA)
More informationProduct Development Process
ENGINE ENGINEERING SYSTEM INTEGRATION COMMERCIAL VEHICLE ENGINEERING ENGINE ENGINEERING DRIVETRAIN ENGINEERING SIMULATION & TESTING SERVICES PRODUCTION TECHNICAL APPLICATION SOFTWARE & SUPPORT Product
More informationBuilding Fast and Accurate Powertrain Models for System and Control Development
Building Fast and Accurate Powertrain Models for System and Control Development Prasanna Deshpande 2015 The MathWorks, Inc. 1 Challenges for the Powertrain Engineering Teams How to design and test vehicle
More informationSpringer. Automotive Model Predictive Control. Luigi del Re, Frank Allgower, Luigi Glielmo, Models, Methods and Applications
Luigi del Re, Frank Allgower, Luigi Glielmo, Carlos Guardiola, and Ilya Kolmanovsky (Eds.) Automotive Model Predictive Control Models, Methods and Applications Springer Contents 1 Chances and Challenges
More informationModeling and Simulate Automotive Powertrain Systems
Modeling and Simulate Automotive Powertrain Systems Maurizio Dalbard 2015 The MathWorks, Inc. 1 Model-Based Design Challenges It s hard to do good Model-Based Design without good models Insufficient expertise
More informationEALA European Automotive Laser Applications February 2013 Bad Nauheim, Germany
Tuesday, 19 February 2013 8.45 h Welcoming address and opening remarks Andrea Huber, Automotive Circle International, DE 9.00 h Laser technology as a key enabler for solutions to future societal challenges
More informationExperience the Hybrid Drive
Experience the Hybrid Drive MAGNA STEYR equips SUV with hybrid drive Hybrid demo vehicle with dspace prototyping system To integrate components into a hybrid vehicle drivetrain, extensive modification
More informationMORSE: MOdel-based Real-time Systems Engineering. Reducing physical testing in the calibration of diagnostic and driveabilty features
MORSE: MOdel-based Real-time Systems Engineering Reducing physical testing in the calibration of diagnostic and driveabilty features Mike Dempsey Claytex Future Powertrain Conference 2017 MORSE project
More informationDetermination of a turbocharged gasoline engine for hybrid powertrains. F. Kercher,
Determination of a turbocharged gasoline engine for hybrid powertrains F. Kercher, 26.10.2015 Determination of a turbocharged gasoline engine for hybrid powertrains Agenda Introduction Hybrid Electric
More informationLMS Imagine.Lab AMESim Ground Loads and Flight Controls
LMS Imagine.Lab AMESim Ground Loads and Flight Controls LMS Imagine.Lab Ground Loads and Flight Controls LMS Imagine.Lab Ground Loads and Flight Controls helps designers from the aerospace industry to
More informationChip Simulation for Virtual ECUs
Chip Simulation for Virtual ECUs QTronic User Conference 2018 Virtual ECUs and Applications 18th of October, Berlin, Germany Dr. Yutaka Murata Honda R&D Co., Ltd. Automotive R&D Center 1 Contents Background
More informationOPENSTEERING PLATFORM
MDYNAMIX AFFILIATED INSTITUTE OF MUNICH UNIVERSITY OF APPLIED SCIENCES OPENSTEERING PLATFORM FOR DEVELOPMENT OF ADVANCED STEERING FUNCTIONS, ADAS AND AUTONOMOUS VEHICLES 9th International Munich Chassis
More informationMomentu. Brake-by-Wire Gathers. HIL Test System for Developing a 12-V Brake-by-Wire System BRAKE-BY-WIRE SYSTEMS
PAGE 14 BRAKE-BY-WIRE SYSTS Brake-by-Wire Gathers omentu HIL Test System for Developing a 12-V Brake-by-Wire System PAGE 15 The future of the brake is electric (brake-bywire system). An electric motor
More informationResults S-Nr Name Vorname Category Ergebnis 1 4 Vogel Uli Overall 94, Lochmann Axel Overall 101, Graner Arno Overall 107,
Division 1 CFHG-P-Sci 1 4 Vogel Uli Overall 4,4 2 Lochmann Axel Overall 1,5 3 Graner Arno Overall,62 4 Hecker Sebastian Overall, 5 0 Ostwald Jan Overall, 6 4 Mechler Christian Overall, 5 Böttcher Göksel
More informationDownsizing Powertrains NVH Implications and Solutions for Vehicle Integration
Downsizing Powertrains NVH Implications and Solutions for Vehicle Integration Realize innovation. Downsizing Powertrains NVH Implications and Solutions for Vehicle Integration Downsizing trends and NVH
More informationGENERIC EPS MODEL Generic Modeling and Control of an Electromechanical Power Steering System for Virtual Prototypes
GENERIC EPS MODEL Generic Modeling and Control of an Electromechanical Power Steering System for Virtual Prototypes Dipl.-Ing. Roman Mannale, Volker Ewald, Dr.-Ing. Markus Bauer Adam Opel AG, Control Systems
More informationEMS & OBD Engine Testing and Instrumentation 1
EMS & OBD Engine Management System (EMS) It consists of ECU, various sensors and actuators in the engine. It uses the information acquired from sensors to control the fuel injection, ignition systems,
More informationControl as a Service (CaaS)
Control as a Service (CaaS) Cloud-based Software Architecture for Automotive Control Applications Hasan Esen*, Hideaki Tanaka +, Akihito Iwai # DENSO (*Europe, + Japan, # Silicon Valley) Masakazu Adachi
More informationContents. Preface... xiii Introduction... xv. Chapter 1: The Systems Approach to Control and Instrumentation... 1
Contents Preface... xiii Introduction... xv Chapter 1: The Systems Approach to Control and Instrumentation... 1 Chapter Overview...1 Concept of a System...2 Block Diagram Representation of a System...3
More informationSpringerBriefs in Applied Sciences and Technology
SpringerBriefs in Applied Sciences and Technology Automotive Engineering: Simulation and Validation Methods Series editors Anton Fuchs, Graz, Austria Hermann Steffan, Graz, Austria Jost Bernasch, Graz,
More informationDesign and evaluate vehicle architectures to reach the best trade-off between performance, range and comfort. Unrestricted.
Design and evaluate vehicle architectures to reach the best trade-off between performance, range and comfort. Unrestricted. Introduction Presenter Thomas Desbarats Business Development Simcenter System
More informationPodium Engineering complete race cars, vehicle prototypes high performance hybrid/electric powertrain
Born in the firm belief that design quality, high project commitment and absolute respect of deadlines are key competitive factors for a consulting and engineering company, Podium Engineering is a dynamic
More informationTHERMAL MANAGEMENT SYNERGY THROUGH INTEGRATION PETE BRAZAS
THERMAL MANAGEMENT SYNERGY THROUGH INTEGRATION PETE BRAZAS 1 Propulsion System Trends Evolution of the TMM A Closer Look at Electrification System Integration Approach Outlook Powertrain Technology Roadmap
More informationV-CAP TM A FEV VIRTUAL POWERTRAIN CALIBRATION PLATFORM
V-CAP T A FEV VITUAL POWETAIN CALIBATION PLATFO V-CAP T TEST CENTES VITUAL POWETAIN CALIBATION PLATFO V-CAP T VITUAL POWETAIN CALIBATION PLATFO VITUAL TEST BED, EAL ESULTS: A SOLUTION FO PASSENGE CA AND
More informationWhat is Vehicle Dynamics?
What is Vehicle Dynamics? by Bengt Jacobson SAFER & SVEA seminar Vehicle Dynamics Challenges May 15, 2013, Göteborg Modified 2013 05 28 05:33 Bengt Jacobson, SAFER & SVEA seminar, 2013 05 15 slide 3 Vehicle
More informationDEVELOPMENT OF A FUTURE MARINE ENERGY SYSTEM: MODEL CENTRIC APPROACH
DEVELOPMENT OF A FUTURE MARINE ENERGY SYSTEM: MODEL CENTRIC APPROACH SMM, Hamburg, 5 September 2018 Kevin Koosup Yum Content Growing complexity Main concepts for Model-Centric Design, What and How? Relataed
More informationOPEN -- Overall Stage Results Styria Cup Runde 4 Printed April 14, 2012 at 15:31
OPEN -- Overall Stage Results Stage 1 -- Stage 1 - Post Medium Course 1 93 10,15 9,1626 105,0000 100,00 88 Loibner, Udo 2 103 11,54 8,9255 102,2831 97,41 72 Stettin, Andreas 3 95 11,23 8,4595 96,9429 92,33
More informationSimulink as a Platform for Full Vehicle Simulation
Simulink as a Platform for Full Vehicle Simulation Mike Sasena (Product Manager) Lars Krause (Application Engineer) Ryan Chladny (Development) 2018 The MathWorks, Inc. 1 Fuel Economy Simulation 2 Vehicle
More informationIgnition- and combustion concepts for lean operated passenger car natural gas engines
Ignition- and combustion concepts for lean operated passenger car natural gas engines Patrik Soltic 1, Thomas Hilfiker 1 Severin Hänggi 2, Richard Hutter 2 1 Empa, Automotive Powertrain Technologies Laboratory,
More informationAUTOMOTIVE ELECTRIFICATION
AUTOMOTIVE ELECTRIFICATION ELECTRIFICATION SOLUTIONS SYSTEM INTEGRATION Markus Maier AVL Europe ITS ELECTRIFICATION TEST SYSTEMS AVL Electrification Test Systems First System sold by 2009 Business Unit
More informationdevelopment of hybrid electric vehicles
IPG Technology Conference Karlsruhe 2012 A multi physical simulation architecture to support the development of hybrid electric vehicles James Chapman CAE Simulation Group Jaguar Land Rover Embedded Systems
More informationFull Vehicle Simulation for Electrification and Automated Driving Applications
Full Vehicle Simulation for Electrification and Automated Driving Applications Vijayalayan R & Prasanna Deshpande Control Design Application Engineering 2015 The MathWorks, Inc. 1 Key Trends in Automotive
More information2nd International FEV Conference
2nd International FEV Conference ZERO CO2 MOBILITY NOVEMBER 13-14, 2018 Hotel Pullman Quellenhof in Aachen, Germany www.fev.com/zero-co2-mobility Focus of the Conference > Zero and Low CO2 Mobility Concepts
More informationGM Powertrain Europe Engineering Center Powertrain Electronic Control Units: development, models, analysis and tests according to General Motors
GM Powertrain Europe Engineering Center Powertrain Electronic Control Units: development, models, analysis and tests according to General Motors Alessandra Neri Hardware Electrical Architecture Development
More informationIntegration of EtherCAT in Advanced Test Systems Solutions and Challenges. Dr. Frank Schütte, Andreas Tenge, Dr. László Juhász dspace GmbH, Paderborn
Integration of EtherCAT in Advanced Test Systems Solutions and Challenges Dr. Frank Schütte, Andreas Tenge, Dr. László Juhász dspace GmbH, Paderborn ETG 2013 Introduction Actual developments in the mobile
More informationUSE OF 1D SIMULATION IN THE COOLING SYSTEMS DESIGN PROCESS
Dr. Bernhard Zuck; 24.10.2011 USE OF 1D SIMULATION IN THE COOLING SYSTEMS DESIGN PROCESS FROM SYSTEM CONCEPT TO FINAL VALIDATION CONTENT 1. Demands and challenges facing Simulation 2. Considered System
More informationASAM. Association for Standardization of Automation and Measuring Systems. ASAM Standards and Electromobility
ASAM Association for Standardization of Automation and Measuring Systems ASAM Standards and Electromobility Jochen Thym, ASAM e.v., Thym.Jochen@VDI.de Frank Müller, Bundesverband emobilität (BEM e.v.),
More informationRegenerative Braking System for Series Hybrid Electric City Bus
Page 0363 Regenerative Braking System for Series Hybrid Electric City Bus Junzhi Zhang*, Xin Lu*, Junliang Xue*, and Bos Li* Regenerative Braking Systems (RBS) provide an efficient method to assist hybrid
More informationPowertrain Control Software A Modular (or à la carte) Approach. Powertrain Control Software, A Modular Approach Marco Fracchia, Vocis Ltd
Powertrain Control Software A Modular (or à la carte) Approach Vocis Specialists in: Transmission and Driveline Control System Engineering; software, hydraulic & electrical actuation systems Vehicle integration
More informationDigital Shaping and Optimization of Fuel Injection Pattern for a Common Rail Automotive Diesel Engine through Numerical Simulation
Digital Shaping and Optimization of Fuel Injection Pattern for a Common Rail Automotive Diesel Engine through Numerical Simulation European GT Conference 2017 - Frankfurt am Main Politecnico di Torino:
More informationFuture Propulsion Systems
Future Propulsion Systems John Kirwan Chief Engineer Advanced Research & Development 31 July 2018 Driven to make a difference Delphi Technologies Overview 12 major technical centers 24 manufacturing facilities
More informationModeling a Phlegmatized Diesel-Engine in a Hybrid Electric Vehicle Using a Transient Predictive Model Michael Auerbach, October 25th, 2010, Frankfurt
Modeling a Phlegmatized Diesel-Engine in a Hybrid Electric Vehicle Using a Transient Predictive Model Michael Auerbach, October 25th, 2010, Frankfurt a. M. Institut für Verbrennungsmotoren und Kraftfahrwesen
More informationAutomotive Electronics/Connectivity/IoT/Smart City Track
Automotive Electronics/Connectivity/IoT/Smart City Track The Automobile Electronics Sessions explore and investigate the ever-growing world of automobile electronics that affect virtually every aspect
More informationWe Support the Automotive World to go Electric Inverter and E-Motor Integration and Validation
We Support the Automotive World to go Electric Inverter and E-Motor Integration and Validation 28 June 2018 Inverter Motor Integration Process 2 SET Power Systems GmbH. All rights reserved Inverter Motor
More informationBicycle Hardware in the Loop Simulator for Braking Dynamics Assistance System
Bicycle Hardware in the Loop Simulator for Braking Dynamics Assistance System IPG Apply & Innovate 2016 Conference Session: Off Highway Cornelius Bott, Martin Pfeiffer, Oliver Maier, Jürgen Wrede 21.09.2016
More informationImplementation and application of Simpackmulti-attribute vehicle models at Toyota Motor Europe
Implementation and application of Simpackmulti-attribute vehicle models at Toyota Motor Europe Ernesto Mottola, PhD. Takao Sugai Vehicle Performance Engineering Toyota Motor Europe NV/SA Technical Center
More informationJuly 17, Software and Systems Teach-in
July 17, 2018 Software and Systems Teach-in Forward-looking statements This presentation, as well as other statements made by Delphi Technologies PLC (the Company ), contain forward-looking statements
More informationModel Based Design: Balancing Embedded Controls Development and System Simulation
All-Day Hybrid Power On the Job Model Based Design: Balancing Embedded Controls Development and System Simulation Presented by : Bill Mammen 1 Topics Odyne The Project System Model Summary 2 About Odyne
More informationModelling of a Double Clutch Transmission with an Appropriate Controller for the Simulation of Shifting Processes
Modelling of a Double Clutch Transmission with an Appropriate Controller for the Simulation of Shifting Henrik Isernhagen Clemens Gühmann Technische Universität Berlin Chair of Electronic Measurement and
More informationCORE. Chris Such, Ricardo
CORE CO 2 REduction for long distance transport Chris Such, Ricardo On behalf of CORE Project Coordinator Johan Engstrom, Volvo CORE Vision CO2RE focus is on highly efficient drivelines for long distance
More informationCNG 2.0 CNG 2.0. Massimo Ferrera. FCA EMEA Powertrain Engineering R&T (CRF) Massimo Ferrera. EMEA Powertrain Engineering R&T (CRF) Alternative Fuels
CNG 2.0 CNG 2.0 Massimo Ferrera FCA EMEA Powertrain Engineering R&T (CRF) Massimo Ferrera EMEA Powertrain Engineering R&T (CRF) Alternative Fuels June 30, 2016 SAE/ATA - CO2 reduction for Transportation
More informationOptimizing Performance and Fuel Economy of a Dual-Clutch Transmission Powertrain with Model-Based Design
Optimizing Performance and Fuel Economy of a Dual-Clutch Transmission Powertrain with Model-Based Design Vijayalayan R, Senior Team Lead, Control Design Application Engineering, MathWorks India Pvt Ltd
More informationMAN Truck & Bus Service und Verkauf Osnabrück
1MAN Dealership Search Truck & Bus Center MAN Truck & Bus Service und Verkauf Osnabrück Hafenringstraße 2 49090 Osnabrück GPS: 52.29856 8.01199 +49 (541)91204-0 +49 (541) 91204-95 Service.Osnabrueck@man.eu
More informationnew products R02 W02 STAG-4 QBOX PLUS 200 GoFast
new products 2014 R02 W02 STAG-4 QBOX PLUS 200 GoFast STAG 200 GoFast STAG easy fast intuitive installation The key idea of the controller is an intuitive system focused on fast and easy installation,
More informationVIRTUAL HYBRID ON THE ENGINE TEST BENCH SMART FRONTLOADING
VIRTUAL HYBRID ON THE ENGINE TEST BENCH SMART FRONTLOADING RDE ENGINEERING [EIL] J. GERSTENBERG, DR. S. STERZING-OPPEL, C. FISCHER, B. SEIDEL, D. TRENKLE, M. OFF, DR. M. GLORA Overview RDE tool chain Virtual
More informationModel Based Development and Calibration
Model Based Development and Calibration Guillaume Broustail & Srinivasan Ananthan AVL UK Expo 215 1 Challenges in the Powertrain Development and AVLs Solutions CO2 / Fuel Consumption Real Driving Emissions
More informationThe Future of Energy The Siemens Info Day on the Topic of Energy siemens.at/future-of-energy
Program The Future of Energy The Siemens Info Day on the Topic of Energy siemens.at/future-of-energy 08:00 Start Check-in 09:00 Electrification Special Stream 1: Conference Center 1 st floor Electrification
More informationReal-Time Modelica Simulation on a Suse Linux Enterprise Real Time PC
Real-Time Modelica Simulation on a Suse Linux Enterprise Real Time PC Arno Ebner Martin Ganchev Helmut Oberguggenberger Franz Pirker Arsenal Research Giefinggasse 2 1210 Vienna Austria arno.ebner@arsenal.ac.at
More informationThe company supplies some of the world s most advanced engine testing systems ranging from combustion analysis to fully automated test benches.
FEV is an internationally recognized leader in the design and development of internal combustion engines and supplier of advanced test and instrumentation systems. Founded in 1978, the company today employs
More information1st International FEV Conference
1st International FEV Conference ZERO CO2 MOBILITY NOVEMBER 9-10, 2017 Hotel Pullman Aachen Quellenhof in Aachen, Germany www.fev.com/zero-co2-mobility FOCUS OF THE CONFERENCE SCIENTIFIC COMMITTEE > Todays
More informationModels everywhere: How a fully integrated model-based test environment can enable progress in the future
Models everywhere: How a fully integrated model-based test environment can enable progress in the future M. Ben Gaid R. Lebas M. Fremovici G. Font G. Le Solliec A. Albrecht Contributions IFP Energies nouvelles
More information(10. IFK) 10th International. Fluid Power Conference. Wednesday, March 9. Volume 2 Conference: Group 1 2: Novel System Structures.
10th International Fluid Power Conference (10. IFK) March 810, 2016 in Dresden Volume 2 Conference: Wednesday, March 9 Group 1 2: Novel System Structures Group 3 5: Pumps Group 4: Group 6: Thermal Behaviour
More information1. ENGINE ECU AND OTHER COMPONENTS
09-3 EGINE CONTROL SYSTEM 1. ENGINE ECU AND OTHER COMPONENTS ECU/Barometric Sensor Camshaft Position Sensor HFM Sensor / Intake Air Temperature Sensor Fuel Filter (Water Sensor) Preheating Relay Accelerator
More informationSIL, HIL, and Vehicle Fuel Economy Analysis of a Pre- Transmission Parallel PHEV
EVS27 Barcelona, Spain, November 17-20, 2013 SIL, HIL, and Vehicle Fuel Economy Analysis of a Pre- Transmission Parallel PHEV Jonathan D. Moore and G. Marshall Molen Mississippi State University Jdm833@msstate.edu
More informationThe leading. Industrial. Ethernet. Standard. Management Summary
The leading Industrial Management Summary Ethernet Standard Motivation 2 Trends in Automation From centralized control system structures to distributed on-site units Use of Ethernet in all levels of automation
More informationAnalytical and Experimental Evaluation of Cylinder Deactivation on a Diesel Engine. S. Pillai, J. LoRusso, M. Van Benschoten, Roush Industries
Analytical and Experimental Evaluation of Cylinder Deactivation on a Diesel Engine S. Pillai, J. LoRusso, M. Van Benschoten, Roush Industries GT Users Conference November 9, 2015 Contents Introduction
More informationDirect Injection Systems For Spark-Ignition And Compression-Ignition Engines By Cornel Stan READ ONLINE
Direct Injection Systems For Spark-Ignition And Compression-Ignition Engines By Cornel Stan READ ONLINE If searching for the ebook by Cornel Stan Direct Injection Systems for Spark- Ignition and Compression-Ignition
More informationOFF-ROAD VEHICLE SYSTEM DYNAMICS HANDBOOK
ROAD AND OFF-ROAD VEHICLE SYSTEM DYNAMICS HANDBOOK Edited by Giampiero Mastinu Manfred Ploechl CRC Press Taylor & Francis Croup Boca Raton London New York CRC Press is an imprint of the Taylor & Francis
More informationApplication of the SuperGen Electro-Mechanical Supercharger to Miller-Cycle Gasoline Turbocharged Engines
Application of the SuperGen Electro-Mechanical Supercharger to Miller-Cycle Gasoline Turbocharged Engines A. H. Guzel, J. Martin North American GT Conference 2017 11/14/2017 1 Overview Program Goal & Technology
More informationATELIER: SIMULATION NUMÉRIQUE POUR LES GROUPES MOTOPROPULSEURS 2 FÉVRIER 2017 SAINT-ETIENNE-DU-ROUVRAY
ATELIER: SIMULATION NUMÉRIQUE POUR LES GROUPES MOTOPROPULSEURS 2 FÉVRIER 2017 SAINT-ETIENNE-DU-ROUVRAY 1 ENGINE AND VEHICLE MODELING & SIMULATION SCIENTIFIC AND TECHNICAL CHALLENGES 2 CONTEXT Main drivers
More informationGRPE-HDH Research Project Offer To Next Validation Phase
Geneva, 05.06.2012 Working Paper No. HDH-10-06 (10th HDH meeting, 05 June 2012) GRPE-HDH Research Project Offer To Next Validation Phase Stefan Hausberger Michael Planer Jonas Fredriksson Outline GRPE-HDH
More informationFocus on the Future Powertrain Strategies for the 21st Century
Focus on the Future Powertrain Strategies for the 21st Century University of Michigan July 12, 2011 1 / P ES / Guenther Raab / July 2011 Continental Agenda Challenges in Future Mobility Continental Powertrain
More informationPowertrain Efficiency Technologies. Turbochargers
Powertrain Efficiency Technologies Turbochargers Turbochargers increasingly are being used by automakers to make it possible to use downsized gasoline engines that consume less fuel but still deliver the
More informationFinite Element Based, FPGA-Implemented Electric Machine Model for Hardware-in-the-Loop (HIL) Simulation
Finite Element Based, FPGA-Implemented Electric Machine Model for Hardware-in-the-Loop (HIL) Simulation Leveraging Simulation for Hybrid and Electric Powertrain Design in the Automotive, Presentation Agenda
More informationDiesel Jet at a glance
Company Overview Diesel Jet at a glance DieselJet was established in 2003. Since 2011 it is owned by METATRON, an industrial group operating in the automotive field as CNG and LPG systems manufacturer.
More informationII. EXPERIMENTAL SETUP AND PROCEDURE
Influence of Fuel Pressure Increment in Diesel Common Rail Engine Using External Tuning Box Kitibodee Sethanunt, Dr.Saiprasit Koetniyom Automotive Engineering Department, The Sirindhron International Thai-German
More informationelektronik Designing vehicle power nets A single simulation tool from initial requirements to series production
www.atzonline.de elektronik 04 April 2013 Volume 8 Offprint from ATZelektronik 4/2013 Springer Automotive Media Springer Fachmedien Wiesbaden GmbH for Bosch Engineering Designing vehicle power nets A single
More informationVehicle Simulation for Engine Calibration to Enhance RDE Performance
Vehicle Simulation for Engine Calibration to Enhance RDE Performance IPG Apply & Innovate 2018 11st and 12nd of September, Karlsruhe, Germany Dr. Yutaka Murata Yui Nishio Dr. Yukihisa Yamaya Masato Kikuchi
More informationComprehensive and Cross-domain Vehicle Simulation for Electrification
Comprehensive and Cross-domain Vehicle Simulation for Electrification IPG apply & innovate 2014 2014 09-24 Powertrain Systems - Christian Appel, Ralf Kleemann Vehicle Systems - Benjamin Leidel Chassis
More informationDTC P20EE, P249D, P249E, or P2BAD
Page 1 of 7 Document ID: 2614257 DTC P20EE, P249D, P249E, or P2BAD Diagnostic Instructions Perform the Diagnostic System Check - Vehicle prior to using this diagnostic procedure. Review Strategy Based
More informationDeveloping Engineering Skills for the Future. José Lopes CEng FIET FIMechE Head of Technical Excellence Jaguar Land Rover Limited
Developing Engineering Skills for the Future José Lopes CEng FIET FIMechE Head of Technical Excellence Jaguar Land Rover Limited Jaguar Land Rover Technology & Innovation Focus Education by Industry Leading
More informationVirtual Testing and Simulation Environment [Micro-HiL] for Engine and Aftertreatment Calibration and Development -Part 2
Copyright 2012 SAE International SAE Paper 2012-01-0928 This paper is posted on this website with permission from SAE Further use or distribution is not permitted without permission from SAE Virtual Testing
More informationThe role of simulation in contemporary Industrial Research Sharing experiences
The role of simulation in contemporary Industrial Research Sharing experiences Rajendra Naik, PhD Senior Principal, GE Global Research May 15, 2018 This is General Electric (GE) POWER HEALTHCARE RENEWABLES
More informationFully Active vs. Reactive AWD coupling systems. How much performance is really needed? Thomas Linortner Manager, Systems Architecture
Fully Active vs. Reactive AWD coupling systems How much performance is really needed? Thomas Linortner Manager, Systems Architecture Overview 1. Market requirements for AWD systems 2. Active and Reactive
More informationUsing Virtualization to Accelerate the Development of ADAS & Automated Driving Functions
Using Virtualization to Accelerate the Development of ADAS & Automated Driving Functions GTC Europe 2017 Dominik Dörr 2 Motivation Virtual Prototypes Virtual Sensor Models CarMaker and NVIDIA DRIVE PX
More informationIntegration of Real-time Systems into the entire Vehicle Simulation
Integration of Real-time Systems into the entire Vehicle Simulation Authors: Dr. Martin Benedikt *, Dr. Georg Stettinger *, Dr. Josef Zehetner Company/ University, Department: * VIRTUAL VEHICLE Research
More informationEPSRC-JLR Workshop 9th December 2014 TOWARDS AUTONOMY SMART AND CONNECTED CONTROL
EPSRC-JLR Workshop 9th December 2014 Increasing levels of autonomy of the driving task changing the demands of the environment Increased motivation from non-driving related activities Enhanced interface
More informationDesigning for Reliability and Robustness with MATLAB
Designing for Reliability and Robustness with MATLAB Parameter Estimation and Tuning Sensitivity Analysis and Reliability Design of Experiments (DoE) and Calibration U. M. Sundar Senior Application Engineer
More information