Determination of a turbocharged gasoline engine for hybrid powertrains. F. Kercher,

Size: px
Start display at page:

Download "Determination of a turbocharged gasoline engine for hybrid powertrains. F. Kercher,"

Transcription

1 Determination of a turbocharged gasoline engine for hybrid powertrains F. Kercher,

2 Determination of a turbocharged gasoline engine for hybrid powertrains Agenda Introduction Hybrid Electric Vehicles (HEV) Investigated concept ICE adaption Results Conclusion and future outlook 2 Determination of a turbocharged gasoline engine for hybrid powertrains F. Kercher, I/EA

3 Introduction Dynamics of aggregats in hybrid powertrains Cooperation-Professorship: Prof. Dr.-Ing. Michael Bargende Postgraduate: Hr. Felix Kercher Department: Powertrain Concepts Modeling & Simulation Head of Department: Dr.-Ing. Sebastian Grams Project Manager: Dr.-Ing. Michael Auerbach 3 Determination of a turbocharged gasoline engine for hybrid powertrains F. Kercher, I/EA

4 Hybrid Electric Vehicles (HEV) Powertrain portfolio degree of electrification conventional powertrain hybrid powertrain full electric powertrain Highly advanced ICEs ICE combined with EM Battery electric vehicles 4 Determination of a turbocharged gasoline engine for hybrid powertrains F. Kercher, I/EA

5 Hybrid Electric Vehicles (HEV) Complexity in modern gasoline engines throttle: manifold injection: injection timing injected mass spark plug: spark timing valve train: cam phasing cam profile angle tumble flap: position direct injection: injection timing injected mass wastegate actuator: position gas exchange thermodynamics 5 Determination of a turbocharged gasoline engine for hybrid powertrains F. Kercher, I/EA

6 Hybrid Electric Vehicles (HEV) Complexity in modern gasoline engines Throttle angle Approx. 5 different angles Wastegate position Approx. 5 different positions Variable valve timing 15 different intake timings 15 different exhaust timings Variable cam profiles 2 intake profiles Tumble flap position 2 positions Dual mode injection system 2 types (DI or MPI) Approx. 10 different proportionings Variable spark timing Approx. 10 different spark timings Overall about combinations possible!!! 6 Determination of a turbocharged gasoline engine for hybrid powertrains F. Kercher, I/EA

7 Hybrid Electric Vehicles (HEV) How to develop an ICE for a hybrid? Huge development efford needed in order to fit an existing ICE in hybrid powertrains Experimental researches 3D CFD Expensive hardware Large workforce needed Reliable results Complex pre-processing Huge amount of time needed to generate results Quality of results depending on boundary conditions 1D simulation Comprehensive understanding of the system possible Little manpower necessary Quick and reliable results Huge number of variations can easily be handled 7 Determination of a turbocharged gasoline engine for hybrid powertrains F. Kercher, I/EA

8 Investigated concept Serial hybrid Minimum of 3 power units required Energy generator (mostly ICE) Electric generator Electric traction motor ICE in serial powertrains Quasistationary operations Engine speed and load are not directly affected by current driving status Generator unit (Energy generator + Electric generator) Efficency depends on perfomance characteristics of the units chemical electric 8 Determination of a turbocharged gasoline engine for hybrid powertrains F. Kercher, I/EA

9 degree of specification Investigated concept Development model for a serial hybrid project timeline concept decision experimental validation hardware matching control strategies determination of operating range determination of generator unit efficencies component adaption 9 Determination of a turbocharged gasoline engine for hybrid powertrains F. Kercher, I/EA

10 Investigated concept Determination of generator unit operating range 40 to 100% electric power Focus on high generator unit efficiency Overlapping of the separate best points at fixed ratio = 1 Different torque levels of EM and ICE lead to best efficiency for investigated concept Operation at best efficiency for each electric power output 10 Determination of a turbocharged gasoline engine for hybrid powertrains F. Kercher, I/EA

11 D = 8 CA 20 percentage points D = 6 CA D = 4 CA Investigated concept Simulation results in ICE operating range Intake Valve Timing 50% Burn Point WG Ratio (m WG /m exh ) Step 3: Fixed valve timing Exhaust Valve Timing Step 1: Increase compression ratio Step 2: Adjusted turbocharger 11 Determination of a turbocharged gasoline engine for hybrid powertrains F. Kercher, I/EA

12 ICE adaption 1D model with adaption steps 1. Increased compression ratio 2. Adjusted turbocharger 3. Fixed valve timing 12 Determination of a turbocharged gasoline engine for hybrid powertrains F. Kercher, I/EA

13 ICE adaption Step 1: Increase of compression ratio (0.8 units) Efficiency loss due to knock limitation Efficiency increase at optimal 50% burn point 13 Determination of a turbocharged gasoline engine for hybrid powertrains F. Kercher, I/EA

14 ICE adaption Step 2: Step 1 + Turbocharger adjustment Decrease of residual gas fraction Overall benefits in efficiency due to lower exhaust gas back pressure 14 Determination of a turbocharged gasoline engine for hybrid powertrains F. Kercher, I/EA

15 ICE adaption Step 3: Step Fixed valve timing (adjusted) Exhaust valve timing is adjusted to match the new turbocharger 15 Determination of a turbocharged gasoline engine for hybrid powertrains F. Kercher, I/EA

16 Results Optimal efficiency operating lines Base Adjusted turbocharger and fixed valve timing lead to reduced low-end-torque Adaption Map range with high efficiencies is widened 16 Determination of a turbocharged gasoline engine for hybrid powertrains F. Kercher, I/EA

17 Determination of generator unit efficiencies Base Adaption 17 Determination of a turbocharged gasoline engine for hybrid powertrains F. Kercher, I/EA

18 Conclusion and outlook Methodical approaches are needed for the development of future powertrains Power units in hybrid powertrains must be adapted in order to match the desired goals 1D simulation is the prefered tool to handle and evaluate the complexity in internal combustion engines Operating ranges of ICEs in serial hybrids can be significantly reduced Increased efficiency Reduced application effort The combined efficiency of a generator unit in a serial hybrid was raised by 2% over a wide range of electric power 18 Determination of a turbocharged gasoline engine for hybrid powertrains F. Kercher, I/EA

19 Thank you for your attention!

Scaling Functions for the Simulation of Different SI-Engine Concepts in Conventional and Electrified Power Trains

Scaling Functions for the Simulation of Different SI-Engine Concepts in Conventional and Electrified Power Trains Scaling Functions for the Simulation of Different SI-Engine Concepts in Conventional and Electrified Power Trains Dipl.-Ing. Michael Huß BMW Group (05/2007 04/2010) Prof. Dr.-Ing Georg Wachtmeister LVK

More information

Modeling a Phlegmatized Diesel-Engine in a Hybrid Electric Vehicle Using a Transient Predictive Model Michael Auerbach, October 25th, 2010, Frankfurt

Modeling a Phlegmatized Diesel-Engine in a Hybrid Electric Vehicle Using a Transient Predictive Model Michael Auerbach, October 25th, 2010, Frankfurt Modeling a Phlegmatized Diesel-Engine in a Hybrid Electric Vehicle Using a Transient Predictive Model Michael Auerbach, October 25th, 2010, Frankfurt a. M. Institut für Verbrennungsmotoren und Kraftfahrwesen

More information

Porsche Engineering driving technologies

Porsche Engineering driving technologies European GT-Suite User Conference 2016 Frankfurt am Main, 17. Oktober 2016 Real Drive Efficiency Improvement in turbocharged Engines by the use of Expansion Intake Manifold Content > Introduction Motivation

More information

The BMW Vision and Strategy in Engine CFD Simulation. EASC 2009, Munich.

The BMW Vision and Strategy in Engine CFD Simulation. EASC 2009, Munich. 2009,., July 6th 2009 Overview Simulation benefits in the framework of the powertrain development process Boundary conditions for powertrain development Challenges and requirements for incylinder CFD CAE

More information

THE FKFS 0D/1D-SIMULATION. Concepts studies, engineering services and consulting

THE FKFS 0D/1D-SIMULATION. Concepts studies, engineering services and consulting THE FKFS 0D/1D-SIMULATION Concepts studies, engineering services and consulting r e s e a r c h i n m o t i o n. VEHICLE IN MOTION On the basis of constant engine speeds and loads, the combustion engine

More information

Simulation of Collective Load Data for Integrated Design and Testing of Vehicle Transmissions. Andreas Schmidt, Audi AG, May 22, 2014

Simulation of Collective Load Data for Integrated Design and Testing of Vehicle Transmissions. Andreas Schmidt, Audi AG, May 22, 2014 Simulation of Collective Load Data for Integrated Design and Testing of Vehicle Transmissions Andreas Schmidt, Audi AG, May 22, 2014 Content Introduction Usage of collective load data in the development

More information

Application of the SuperGen Electro-Mechanical Supercharger to Miller-Cycle Gasoline Turbocharged Engines

Application of the SuperGen Electro-Mechanical Supercharger to Miller-Cycle Gasoline Turbocharged Engines Application of the SuperGen Electro-Mechanical Supercharger to Miller-Cycle Gasoline Turbocharged Engines A. H. Guzel, J. Martin North American GT Conference 2017 11/14/2017 1 Overview Program Goal & Technology

More information

Development of a Double Variable Cam Phasing Strategy for Turbocharged SIDI Engines

Development of a Double Variable Cam Phasing Strategy for Turbocharged SIDI Engines !"" #$!%& Development of a Double Variable Cam Phasing Strategy for Turbocharged SIDI Engines GMPT Europe, Engine Development & Simulation Vincenzo Bevilacqua, Jany Krieg, Roland Maucher, Raymond Reinmann

More information

Background "-.#123/,"- -%,,+,=1 4

Background -.#123/,- -%,,+,=1 4 ! "" "!" #$%&' %(!)* Background +,-.+/" "-"%- %", "-.#3/,"-,--, -%,,+,= 5 %$$./- "-$+ # Motivation -",,$,%" ) 7-"+. #33 / $,-$./ #-7- $ Numerical Techniques +,! *+,! ( (!./ -,!,!,! + & & ' # 9:-,- -- *9+>,

More information

Gasoline Engine Performance and Emissions Future Technologies and Optimization

Gasoline Engine Performance and Emissions Future Technologies and Optimization Gasoline Engine Performance and Emissions Future Technologies and Optimization Paul Whitaker - Technical Specialist - Ricardo 8 th June 2005 RD. 05/52402.1 Contents Fuel Economy Trends and Drivers USA

More information

Siemens Pioneer in Electric Mobility

Siemens Pioneer in Electric Mobility Siemens Pioneer in Electric Mobility Prof. Dr. Siegfried Russwurm Member of the Managing Board of Siemens AG CEO Siemens Press Conference Munich, August 31, 2011 Siemens Siemens AG, 2011. AG, 2011. All

More information

Holistic 1D-Model for Cooling Management and Engine Analysis of a Heavy-Duty Truck

Holistic 1D-Model for Cooling Management and Engine Analysis of a Heavy-Duty Truck Holistic 1D-Model for Cooling Management and Engine Analysis of a Heavy-Duty Truck Dominik Renner Dr. Alexander Schydlo 26 th October 2015 MAN Truck & Bus AG < 1 > Agenda 1 Introduction 2 Model Description

More information

Concept Evaluation and Optimization of a 2-Stage Charging System

Concept Evaluation and Optimization of a 2-Stage Charging System Concept Evaluation and Optimization of a 2-Stage Charging System GT Conference 2014, OCTOBER 20-21 2014 Msc. ETH Pascal Mühlebach, Dr. sc. techn. Christian Lämmle combustion and flow solutions GmbH, Zurich

More information

Model-Based Design and Hardware-in-the-Loop Simulation for Clean Vehicles Bo Chen, Ph.D.

Model-Based Design and Hardware-in-the-Loop Simulation for Clean Vehicles Bo Chen, Ph.D. Model-Based Design and Hardware-in-the-Loop Simulation for Clean Vehicles Bo Chen, Ph.D. Dave House Associate Professor of Mechanical Engineering and Electrical Engineering Department of Mechanical Engineering

More information

Dual Fuel Combustion an Applicable Technology for Mobile Application?

Dual Fuel Combustion an Applicable Technology for Mobile Application? 1 S C I E N C E P A S S I O N T E C H N O L O G Y Dual Fuel Combustion an Applicable Technology for Mobile Application? 10 th Conference Eco Mobility 2025plus Univ.Prof. Dr. Helmut Eichlseder Institute

More information

USE OF 1D SIMULATION IN THE COOLING SYSTEMS DESIGN PROCESS

USE OF 1D SIMULATION IN THE COOLING SYSTEMS DESIGN PROCESS Dr. Bernhard Zuck; 24.10.2011 USE OF 1D SIMULATION IN THE COOLING SYSTEMS DESIGN PROCESS FROM SYSTEM CONCEPT TO FINAL VALIDATION CONTENT 1. Demands and challenges facing Simulation 2. Considered System

More information

Crankcase scavenging.

Crankcase scavenging. Software for engine simulation and optimization www.diesel-rk.bmstu.ru The full cycle thermodynamic engine simulation software DIESEL-RK is designed for simulating and optimizing working processes of two-

More information

Experimental Investigations of Transient Emissions Behaviour Using Engine-in-the-Loop

Experimental Investigations of Transient Emissions Behaviour Using Engine-in-the-Loop TSI.InP.P_User5.Temperature7 [degc] TSI.InP.P_User4.Temperature [degc] TSI.InP.P_User4.Temperature3 [degc] Car.v [m/s] IO.Emission.CO_ DM.Gas Car.ay [m/s^] Car.ax [m/s^] Experimental Investigations of

More information

GT-Suite Users International Conference Frankfurt a.m., October 22 nd 2012

GT-Suite Users International Conference Frankfurt a.m., October 22 nd 2012 GT-Suite Users International Conference Frankfurt a.m., October 22 nd 2012 Computational Analysis of Internal and External EGR Strategies combined with Miller Cycle Concept for a Two Stage Turbocharged

More information

COMPARISON OF VARIABLE VALVE ACTUATION, CYLINDER DEACTIVATION AND INJECTION STRATEGIES FOR LOW-LOAD RCCI OPERATION OF A LIGHT-DUTY ENGINE

COMPARISON OF VARIABLE VALVE ACTUATION, CYLINDER DEACTIVATION AND INJECTION STRATEGIES FOR LOW-LOAD RCCI OPERATION OF A LIGHT-DUTY ENGINE COMPARISON OF VARIABLE VALVE ACTUATION, CYLINDER DEACTIVATION AND INJECTION STRATEGIES FOR LOW-LOAD RCCI OPERATION OF A LIGHT-DUTY ENGINE Anand Nageswaran Bharath, Yangdongfang Yang, Rolf D. Reitz, Christopher

More information

Early Stage Vehicle Concept Design with GT-SUITE

Early Stage Vehicle Concept Design with GT-SUITE 1/18 Early Stage Vehicle Concept Design with GT-SUITE Katsuya Minami Honda R&D Co., Ltd., Automotive R&D Center, Japan Benefits of 1D-Simulation 2/18 How each component is operating during legislative

More information

THERMAL MANAGEMENT SYNERGY THROUGH INTEGRATION PETE BRAZAS

THERMAL MANAGEMENT SYNERGY THROUGH INTEGRATION PETE BRAZAS THERMAL MANAGEMENT SYNERGY THROUGH INTEGRATION PETE BRAZAS 1 Propulsion System Trends Evolution of the TMM A Closer Look at Electrification System Integration Approach Outlook Powertrain Technology Roadmap

More information

Simulation of the Mixture Preparation for an SI Engine using Multi-Component Fuels

Simulation of the Mixture Preparation for an SI Engine using Multi-Component Fuels ICE Workshop, STAR Global Conference 2012 March 19-21 2012, Amsterdam Simulation of the Mixture Preparation for an SI Engine using Multi-Component Fuels Michael Heiss, Thomas Lauer Content Introduction

More information

Models everywhere: How a fully integrated model-based test environment can enable progress in the future

Models everywhere: How a fully integrated model-based test environment can enable progress in the future Models everywhere: How a fully integrated model-based test environment can enable progress in the future M. Ben Gaid R. Lebas M. Fremovici G. Font G. Le Solliec A. Albrecht Contributions IFP Energies nouvelles

More information

Introduction Engine Systems. Chris Onder, Raffael Hedinger, Norbert Zsiga, Michael Zihlmann

Introduction Engine Systems. Chris Onder, Raffael Hedinger, Norbert Zsiga, Michael Zihlmann Introduction Engine Systems Chris Onder, Raffael Hedinger, Norbert Zsiga, Michael Zihlmann 1 Introduction Engine Systems 1. Concept of a combustion engine 2. Different types of engines 3. Topics of the

More information

14 Combustion engine. Combustion engine. The engine. Understanding it in its entirety. Kurt Kirsten. Schaeffler SYMPOSIUM 2010

14 Combustion engine. Combustion engine. The engine. Understanding it in its entirety. Kurt Kirsten. Schaeffler SYMPOSIUM 2010 The engine Understanding it in its entirety Kurt Kirsten 204 Schaeffler SYMPOSIUM 2010 Schaeffler SYMPOSIUM 2010 205 Introduction In the past, the development of automobiles and their drive systems was

More information

Engine Encapsulation for Increased Fuel Efficiency of Road Vehicles

Engine Encapsulation for Increased Fuel Efficiency of Road Vehicles Engine Encapsulation for Increased Fuel Efficiency of Road Vehicles A project within the program: Energy and Environment Start: July 2013 End: June 2017 Blago Minovski Department of Mechanics and Maritime

More information

Real-world to Lab Robust measurement requirements for future vehicle powertrains

Real-world to Lab Robust measurement requirements for future vehicle powertrains Real-world to Lab Robust measurement requirements for future vehicle powertrains Andrew Lewis, Edward Chappell, Richard Burke, Sam Akehurst, Simon Pickering University of Bath Simon Regitz, David R Rogers

More information

Development of Variable Geometry Turbocharger Contributes to Improvement of Gasoline Engine Fuel Economy

Development of Variable Geometry Turbocharger Contributes to Improvement of Gasoline Engine Fuel Economy Development of Variable Geometry Turbocharger Contributes to Improvement of Gasoline Engine Fuel Economy 30 MOTOKI EBISU *1 YOSUKE DANMOTO *1 YOJI AKIYAMA *2 HIROYUKI ARIMIZU *3 KEIGO SAKAMOTO *4 Every

More information

Proposal to establish a laboratory for combustion studies

Proposal to establish a laboratory for combustion studies Proposal to establish a laboratory for combustion studies Jayr de Amorim Filho Brazilian Bioethanol Science and Technology Laboratory SCRE Single Cylinder Research Engine Laboratory OUTLINE Requirements,

More information

Direct Injection Ethanol Boosted Gasoline Engines: Biofuel Leveraging For Cost Effective Reduction of Oil Dependence and CO 2 Emissions

Direct Injection Ethanol Boosted Gasoline Engines: Biofuel Leveraging For Cost Effective Reduction of Oil Dependence and CO 2 Emissions Direct Injection Ethanol Boosted Gasoline Engines: Biofuel Leveraging For Cost Effective Reduction of Oil Dependence and CO 2 Emissions D.R. Cohn* L. Bromberg* J.B. Heywood Massachusetts Institute of Technology

More information

Digital Shaping and Optimization of Fuel Injection Pattern for a Common Rail Automotive Diesel Engine through Numerical Simulation

Digital Shaping and Optimization of Fuel Injection Pattern for a Common Rail Automotive Diesel Engine through Numerical Simulation Digital Shaping and Optimization of Fuel Injection Pattern for a Common Rail Automotive Diesel Engine through Numerical Simulation European GT Conference 2017 - Frankfurt am Main Politecnico di Torino:

More information

Fuel Economy Potential of Advanced Configurations from 2010 to 2045

Fuel Economy Potential of Advanced Configurations from 2010 to 2045 Fuel Economy Potential of Advanced Configurations from 2010 to 2045 IFP HEV Conference November, 2008 Aymeric Rousseau Argonne National Laboratory Sponsored by Lee Slezak U.S. DOE Evaluate Vehicle Fuel

More information

AVL AND LARGE ENGINE TRENDS ANDREI LUDU

AVL AND LARGE ENGINE TRENDS ANDREI LUDU AVL AND LARGE ENGINE TRENDS ANDREI LUDU Market Trends ITINERARY AVL and Large Engines Solutions Technology Tools Industry Networking Conclusions WORLD PRIMARY ENERGY CONSUMPTION Mtoe 18000 16000 14000

More information

The effect of ethanolled gasoline on the performance and gaseous and particulate emissions on a 2/4-stroke switchable DI engine Yan Zhang & Hua Zhao

The effect of ethanolled gasoline on the performance and gaseous and particulate emissions on a 2/4-stroke switchable DI engine Yan Zhang & Hua Zhao The effect of ethanolled gasoline on the performance and gaseous and particulate emissions on a 2/4-stroke switchable DI engine Yan Zhang & Hua Zhao Centre for Advanced Powertrain and Fuels (CAPF) Brunel

More information

Engine Heat Transfer. Engine Heat Transfer

Engine Heat Transfer. Engine Heat Transfer Engine Heat Transfer 1. Impact of heat transfer on engine operation 2. Heat transfer environment 3. Energy flow in an engine 4. Engine heat transfer Fundamentals Spark-ignition engine heat transfer Diesel

More information

4th European Automotive Simulation Conference - EASC 2009

4th European Automotive Simulation Conference - EASC 2009 Consistent Improvement of the Charging Technology of Audi TFSI Engines by CFD K. Vehreschild, Audi AG Ingolstadt - EASC 2009 Contents Introduction - Charging technology and CFD at Audi CFD modelling approach

More information

COMBUSTION CONTROLLER DEVELOPMENT AND APPLICATION USING MODEL-BASED DESIGN

COMBUSTION CONTROLLER DEVELOPMENT AND APPLICATION USING MODEL-BASED DESIGN COMBUSTION CONTROLLER DEVELOPMENT AND APPLICATION USING MODEL-BASED DESIGN Klaus Rothbart April, 7th 00 AGENDA Introduction Development Application on engine test bed Results Summary INTRODUCTION AVL The

More information

Variable Intake Manifold Development trend and technology

Variable Intake Manifold Development trend and technology Variable Intake Manifold Development trend and technology Author Taehwan Kim Managed Programs LLC (tkim@managed-programs.com) Abstract The automotive air intake manifold has been playing a critical role

More information

Proper Modeling of Integrated Vehicle Systems

Proper Modeling of Integrated Vehicle Systems Proper Modeling of Integrated Vehicle Systems Geoff Rideout Graduate Student Research Assistant Automated Modeling Laboratory University of Michigan Modeling of Integrated Vehicle Powertrain Systems 1

More information

AUTOMOTIVE ELECTRIFICATION

AUTOMOTIVE ELECTRIFICATION AUTOMOTIVE ELECTRIFICATION ELECTRIFICATION SOLUTIONS SYSTEM INTEGRATION Markus Maier AVL Europe ITS ELECTRIFICATION TEST SYSTEMS AVL Electrification Test Systems First System sold by 2009 Business Unit

More information

The company supplies some of the world s most advanced engine testing systems ranging from combustion analysis to fully automated test benches.

The company supplies some of the world s most advanced engine testing systems ranging from combustion analysis to fully automated test benches. FEV is an internationally recognized leader in the design and development of internal combustion engines and supplier of advanced test and instrumentation systems. Founded in 1978, the company today employs

More information

The Chances and Potentials for Low-Voltage Hybrid Solutions in Ultra-Light Vehicles

The Chances and Potentials for Low-Voltage Hybrid Solutions in Ultra-Light Vehicles Switzerland, Schlatt, 9 th -10 th October 2014 The Chances and Potentials for Low-Voltage Hybrid Solutions in Ultra-Light Vehicles Dipl.-Ing. Robert Steffan Prof. Dr. Peter Hofmann Prof. Dr. Bernhard Geringer

More information

Potential of Turbocharging

Potential of Turbocharging 29119_VB_PES_GT-Suite-Coference.ppt Vincenzo Bevilacqua, PE-AB Potential of Turbocharging 11.12.28 Seite 1 von 24 29119_VB_PES_GT-Suite-Coference.ppt Vincenzo Bevilacqua, PE-AB Potential of Turbocharging

More information

1D/3D Computational Analysis of a V6 S.I. Variable Intake Manifold

1D/3D Computational Analysis of a V6 S.I. Variable Intake Manifold V6 S.I. Variable Intake Manifold Christof Schernus, Thorsten Märtens, Werner Willems, FEV Motorentechnik GmbH & Co. KG Martin Hopp, Lehrstuhl für Verbrennungskraftmaschinen, RWTH Aachen Heijo Oehlschlegel,

More information

2018 Schaeffler Symposium Jerry Dixon - The Next Generation of Valve Train 9/6/2018 THE NEXT GENERATION OF VALVE TRAIN JERRY DIXON

2018 Schaeffler Symposium Jerry Dixon - The Next Generation of Valve Train 9/6/2018 THE NEXT GENERATION OF VALVE TRAIN JERRY DIXON THE NEXT GENERATION OF VALVE TRAIN JERRY DIXON 1 WHAT SHOULD BE EXPECTED FROM THE NEXT GENERATION OF VALVE TRAINS? Next Generation Valve Train Expectations 1 Improved Performance 2 Modularity / Flexibility

More information

Experience the Hybrid Drive

Experience the Hybrid Drive Experience the Hybrid Drive MAGNA STEYR equips SUV with hybrid drive Hybrid demo vehicle with dspace prototyping system To integrate components into a hybrid vehicle drivetrain, extensive modification

More information

Foundations of Thermodynamics and Chemistry. 1 Introduction Preface Model-Building Simulation... 5 References...

Foundations of Thermodynamics and Chemistry. 1 Introduction Preface Model-Building Simulation... 5 References... Contents Part I Foundations of Thermodynamics and Chemistry 1 Introduction... 3 1.1 Preface.... 3 1.2 Model-Building... 3 1.3 Simulation... 5 References..... 8 2 Reciprocating Engines... 9 2.1 Energy Conversion...

More information

Advanced Combustion Strategies for High Efficiency Engines of the 21 st Century

Advanced Combustion Strategies for High Efficiency Engines of the 21 st Century Advanced Combustion Strategies for High Efficiency Engines of the 21 st Century Jason Martz Assistant Research Scientist and Adjunct Assistant Professor Department of Mechanical Engineering University

More information

Alternative Powertrain and Challenges for Next Decade

Alternative Powertrain and Challenges for Next Decade Alternative Powertrain and Challenges for Next Decade Prof. Dr. Willi Diez Director Institute for Automotive Research at the University of Applied Sciences Nuertingen (Germany) SIAM Annual Convention 2011

More information

2B.3 - Free Piston Engine Hydraulic Pump

2B.3 - Free Piston Engine Hydraulic Pump 2B.3 - Free Piston Engine Hydraulic Pump Georgia Institute of Technology Milwaukee School of Engineering North Carolina A&T State University Purdue University University of Illinois, Urbana-Champaign University

More information

ABB Turbo Systems Ltd., London, April 15 th- 16 th 2015 Turbocharging flexibility to match the operation flexibility challenge

ABB Turbo Systems Ltd., London, April 15 th- 16 th 2015 Turbocharging flexibility to match the operation flexibility challenge ABB Turbo Systems Ltd., London, April 15 th- 16 th 2015 Turbocharging flexibility to match the operation flexibility challenge Agenda Power2 Miller Enhanced VCM Extended Field Gas Engine Controls May 29,

More information

HERCULES-2 Project. Deliverable: D8.8

HERCULES-2 Project. Deliverable: D8.8 HERCULES-2 Project Fuel Flexible, Near Zero Emissions, Adaptive Performance Marine Engine Deliverable: D8.8 Study an alternative urea decomposition and mixer / SCR configuration and / or study in extended

More information

The Road to Electrification The Magna Powertrain Approach. Dr. Stephan Weng EVP GETRAG Global, Magna Powertrain

The Road to Electrification The Magna Powertrain Approach. Dr. Stephan Weng EVP GETRAG Global, Magna Powertrain The Road to Electrification The Magna Powertrain Approach Dr. Stephan Weng EVP GETRAG Global, Magna Powertrain Technology Drivers Legal Requirements End Consumer Expectations OEM Brand DNA OEM Global Product

More information

Comprehensive and Cross-domain Vehicle Simulation for Electrification

Comprehensive and Cross-domain Vehicle Simulation for Electrification Comprehensive and Cross-domain Vehicle Simulation for Electrification IPG apply & innovate 2014 2014 09-24 Powertrain Systems - Christian Appel, Ralf Kleemann Vehicle Systems - Benjamin Leidel Chassis

More information

ELECTRICAL 48 V MAIN COOLANT PUMP TO REDUCE CO 2 EMISSIONS

ELECTRICAL 48 V MAIN COOLANT PUMP TO REDUCE CO 2 EMISSIONS ELECTRICAL 48 V MAIN COOLANT PUMP TO REDUCE CO 2 EMISSIONS Mahle has developed an electrical main coolant pump for the 48 V on-board net. It replaces the mechanical pump and offers further reductions in

More information

OLIVER RIEMENSCHNEIDER, ABB TURBO SYSTEMS LTD Peak performance in a broad operational envelope. 8 th AVL Large Engines Techdays

OLIVER RIEMENSCHNEIDER, ABB TURBO SYSTEMS LTD Peak performance in a broad operational envelope. 8 th AVL Large Engines Techdays OLIVER RIEMENSCHNEIDER, ABB TURBO SYSTEMS LTD 8 th AVL Large Engines Techdays The challenge: increasing complexity April 6, 2018 Slide 2 The challenge: increasing complexity Engine efficiency Conventional

More information

EGR Transient Simulation of a Turbocharged Diesel Engine using GT-Power

EGR Transient Simulation of a Turbocharged Diesel Engine using GT-Power GT-SUITE USERS CONFERENCE FRANKFURT, OCTOBER 4 TH 2004 EGR Transient Simulation of a Turbocharged Diesel Engine using GT-Power TEAM OF WORK: G. GIAFFREDA, C. VENEZIA RESEARCH CENTRE ENGINE ENGINEERING

More information

Optimal energy efficiency, vehicle stability and safety on the OpEneR EV with electrified front and rear axles

Optimal energy efficiency, vehicle stability and safety on the OpEneR EV with electrified front and rear axles Optimal energy efficiency, vehicle stability and safety on the OpEneR EV with electrified front and rear axles Berlin, Monday 17 June 2013 Dr. Stephen Jones, AVL Emre Kural, AVL Alexander Massoner, AVL

More information

APPLICATION OF STAR-CCM+ TO TURBOCHARGER MODELING AT BORGWARNER TURBO SYSTEMS

APPLICATION OF STAR-CCM+ TO TURBOCHARGER MODELING AT BORGWARNER TURBO SYSTEMS APPLICATION OF STAR-CCM+ TO TURBOCHARGER MODELING AT BORGWARNER TURBO SYSTEMS BorgWarner: David Grabowska 9th November 2010 CD-adapco: Dean Palfreyman Bob Reynolds Introduction This presentation will focus

More information

EFFICIENZA E ANALISI TERMICA. Ing. Ivan Saltini Italy Country Manager

EFFICIENZA E ANALISI TERMICA. Ing. Ivan Saltini Italy Country Manager EFFICIENZA E ANALISI TERMICA Ing. Ivan Saltini Italy Country Manager How to get most realistic efficiency calculation for gearboxes? Topics Motivation / general calculation Industrial bevel-helical gearbox

More information

SuperGen - Novel Low Cost Electro-Mechanical Mild Hybrid and Boosting System. Jason King, Chief Engineer

SuperGen - Novel Low Cost Electro-Mechanical Mild Hybrid and Boosting System. Jason King, Chief Engineer SuperGen - Novel Low Cost Electro-Mechanical Mild Hybrid and Boosting System Jason King, Chief Engineer FPC2015 Quick overview of Integral Powertrain (IPT) SuperGen concept Analysis results Test results

More information

Part Load Engine Performance prediction for a gasoline engine using Neural Networks. Sreekanth R, Sundar S, Rangarajan S, Anand G -System Simulation

Part Load Engine Performance prediction for a gasoline engine using Neural Networks. Sreekanth R, Sundar S, Rangarajan S, Anand G -System Simulation Part Load Engine Performance prediction for a gasoline engine using Neural Networks Sreekanth R, Sundar S, Rangarajan S, Anand G -System Simulation CAE-2 System Simulation GT-SUITE User Conference Feb

More information

Integrated 1D Simulation for a Large Low-Speed 2-Stroke Marine Engine. Filip Cernik, CTU Prague

Integrated 1D Simulation for a Large Low-Speed 2-Stroke Marine Engine. Filip Cernik, CTU Prague Integrated 1D Simulation for a Large Low-Speed 2-Stroke Marine Engine Filip Cernik, CTU Prague OUTLINE Introduction Injector Model Combustion Routine Exhaust Valve Drive Model Integrated Simulation Summary

More information

Ignition- and combustion concepts for lean operated passenger car natural gas engines

Ignition- and combustion concepts for lean operated passenger car natural gas engines Ignition- and combustion concepts for lean operated passenger car natural gas engines Patrik Soltic 1, Thomas Hilfiker 1 Severin Hänggi 2, Richard Hutter 2 1 Empa, Automotive Powertrain Technologies Laboratory,

More information

Marc ZELLAT, Driss ABOURI, Thierry CONTE and Riyad HECHAICHI CD-adapco

Marc ZELLAT, Driss ABOURI, Thierry CONTE and Riyad HECHAICHI CD-adapco 16 th International Multidimensional Engine User s Meeting at the SAE Congress 2006,April,06,2006 Detroit, MI RECENT ADVANCES IN SI ENGINE MODELING: A NEW MODEL FOR SPARK AND KNOCK USING A DETAILED CHEMISTRY

More information

Ultra-Low Carbon Powertrain Program (ETHOS) Sep 20, 2016

Ultra-Low Carbon Powertrain Program (ETHOS) Sep 20, 2016 Ultra-Low Carbon Powertrain Program (ETHOS) Sep 20, 2016 ETHOS Program Overview Project Motivation Ultra-Low Carbon Powertrain Program (CEC) CEC seeks to fund projects which reduce fossil fuel burning

More information

GT-Suite European User Conference

GT-Suite European User Conference GT-Suite European User Conference E-Charging on a High Performance Diesel engine D. Peci, C. Venezia EMEA Region - Powertrain Engineering Powertrain Research&Technology Frankfurt, Germany October 26th,

More information

Modeling the Electrically Assisted Variable Speed (EAVS) Supercharger

Modeling the Electrically Assisted Variable Speed (EAVS) Supercharger Modeling the Electrically Assisted Variable Speed (EAVS) Supercharger Eaton Corporation Vehicle Group Brian Smith Brandon Biller Overview of EAVS Technology 2 EAVS System Development at Eaton Hardware

More information

INFLUENCE OF THE NUMBER OF NOZZLE HOLES ON THE UNBURNED FUEL IN DIESEL ENGINE

INFLUENCE OF THE NUMBER OF NOZZLE HOLES ON THE UNBURNED FUEL IN DIESEL ENGINE INFLUENCE OF THE NUMBER OF NOZZLE HOLES ON THE UNBURNED FUEL IN DIESEL ENGINE 1. UNIVERSITY OF RUSE, 8, STUDENTSKA STR., 7017 RUSE, BULGARIA 1. Simeon ILIEV ABSTRACT: The objective of this paper is to

More information

Integrated Simulation of a Truck Diesel Engine with a Hydraulic Engine Braking System

Integrated Simulation of a Truck Diesel Engine with a Hydraulic Engine Braking System Integrated Simulation of a Truck Diesel Engine with a Hydraulic Engine Braking System N. Brinkert, K. Kanning GT-Suite Users Conference 2008 I want to give you a short presentation about a project we work

More information

IC Engine Control - the Challenge of Downsizing

IC Engine Control - the Challenge of Downsizing IC Engine Control - the Challenge of Downsizing Dariusz Cieslar* 2nd Workshop on Control of Uncertain Systems: Modelling, Approximation, and Design Department of Engineering, University of Cambridge 23-24/9/2013

More information

P15318: Gaseous Mass Flow Rate Controller

P15318: Gaseous Mass Flow Rate Controller P15318: Gaseous Mass Flow Rate Controller B R I A N C H U R C H A N T H O N Y S A L M I N T Y L E R B R E I T U N G R O S S B L U T H M I C H A E L O P L I N G E R S T E P H E N M R O Z P15318 Introduction

More information

Dual Fuel Engine Charge Motion & Combustion Study

Dual Fuel Engine Charge Motion & Combustion Study Dual Fuel Engine Charge Motion & Combustion Study STAR-Global-Conference March 06-08, 2017 Berlin Kamlesh Ghael, Prof. Dr. Sebastian Kaiser (IVG-RF), M. Sc. Felix Rosenthal (IFKM-KIT) Introduction: Operation

More information

Low Emissions IC Engine Development at Ford Motor Company

Low Emissions IC Engine Development at Ford Motor Company Low Emissions IC Engine Development at Ford Motor Company George Davis Powertrain Research and Advanced Engineering ERC Symposium University of Wisconsin at Madison Research and Advanced Engineering June

More information

Modelling Combustion in DI-SI using the G-equation Method and Detailed Chemistry: Emissions and knock. M.Zellat, D.Abouri, Y.Liang, C.

Modelling Combustion in DI-SI using the G-equation Method and Detailed Chemistry: Emissions and knock. M.Zellat, D.Abouri, Y.Liang, C. Modelling Combustion in DI-SI using the G-equation Method and Detailed Chemistry: Emissions and knock Realize innovation. M.Zellat, D.Abouri, Y.Liang, C.Kralj Main topics of the presentation 1. Context

More information

Steady-State Engine Modeling for Calibration: A Productivity and Quality Study

Steady-State Engine Modeling for Calibration: A Productivity and Quality Study Steady-State Engine Modeling for Calibration: A Productivity and Quality Study MathWorks Automotive Conference 2007 Hyatt Regency, Dearborn, MI Ulrike Schoop John Reeves Satoru Watanabe Ken Butts IAV GmbH

More information

CONTROLLING COMBUSTION IN HCCI DIESEL ENGINES

CONTROLLING COMBUSTION IN HCCI DIESEL ENGINES CONTROLLING COMBUSTION IN HCCI DIESEL ENGINES Nicolae Ispas *, Mircea Năstăsoiu, Mihai Dogariu Transilvania University of Brasov KEYWORDS HCCI, Diesel Engine, controlling, air-fuel mixing combustion ABSTRACT

More information

HERGOTT Julien & MOISY Alexandre EHRS modelling with GT-Suite European GT Conference 2015

HERGOTT Julien & MOISY Alexandre EHRS modelling with GT-Suite European GT Conference 2015 HERGOTT Julien & MOISY Alexandre 26-10 - 2015 EHRS modelling with GT-Suite European GT Conference 2015 Reduce CO2 by more than 50% in Europe, USA and China between 2005 and 2025 Average CO2 emissions from

More information

Potential of variable intake manifolds to reduce CO 2 under partial load

Potential of variable intake manifolds to reduce CO 2 under partial load Potential of variable intake manifolds to reduce CO 2 under partial load Released in: MTZ extra, August 2016. Springer Fachmedien Wiesbaden. Leadership in Filtration 2 MANN+HUMMEL POTENTIAL OF VARIABLE

More information

Reduction of Fuel Consumption and Emissions Electromechanical Valve Train in Vehicle Operation

Reduction of Fuel Consumption and Emissions Electromechanical Valve Train in Vehicle Operation Technology- H i g h l i g h t s a n d R & D A c t i v i t i e s a t F E V Issue 12 / Aug. 1999 Reduction of Fuel Consumption and Emissions Electromechanical Valve Train in Vehicle Operation FEV has proven

More information

Co-Simulation of GT-Suite and CarMaker for Real Traffic and Race Track Simulations

Co-Simulation of GT-Suite and CarMaker for Real Traffic and Race Track Simulations Co-Simulation of GT-Suite and CarMaker for Real Traffic and Race Track Simulations GT-Suite Conference Frankfurt, 26 th October 215 Andreas Balazs, BGA-T Agenda Introduction Methodology FEV GT-Drive model

More information

48V Vehicle Simulation Approaches Detailed through System Level

48V Vehicle Simulation Approaches Detailed through System Level 48V Vehicle Simulation Approaches Detailed through System Level 2017 GT-SUITE NA Conference Dr. Philip Keller, BorgWarner Inc. Varun Negandhi, EngSim Corp. 11/6/2017 Outline for Today s Presentation 2017

More information

Efficiency Increase of a High Performance Gas Engine for Distributed Power Generation

Efficiency Increase of a High Performance Gas Engine for Distributed Power Generation Efficiency Increase of a High Performance Gas Engine for Distributed Power Generation M. Grotz, R. Böwing, J. Lang and J. Thalhauser (GE) P. Christiner and A. Wimmer (LEC) February 27, 2015 Imagination

More information

All-in-one Simulation and DoE Methodology for the Evaluation and Optimisation of HEV Configurations. W.-R. Landschoof, M. Kämpfner, Dr. M.

All-in-one Simulation and DoE Methodology for the Evaluation and Optimisation of HEV Configurations. W.-R. Landschoof, M. Kämpfner, Dr. M. All-in-one Simulation and DoE Methodology for the Evaluation and Optimisation of HEV Configurations W.-R. Landschoof, M. Kämpfner, Dr. M. Zillmer 1 Contents 1. Motivation 2. Hybrid concepts 3. Significance

More information

From the new text book by BoostBusters: Internal Combustion Engine Gasexchange and Boosting Order from:

From the new text book by BoostBusters: Internal Combustion Engine Gasexchange and Boosting Order from: 11:th GT-Power Users Conference in Frankfurt Airport October 8 2007 Lennarth Zander BoostBusters Mjölner-Hammer of Thor From the new text book by BoostBusters: Internal Combustion Engine Gasexchange and

More information

Simulating Gas-Air Mixture Formation for Dual-Fuel Applications

Simulating Gas-Air Mixture Formation for Dual-Fuel Applications Simulating Gas-Air Mixture Formation for Dual-Fuel Applications Karri Keskinen, Ossi Kaario, Mika Nuutinen, Ville Vuorinen, Zaira Künsch and Martti Larmi Thermodynamics and Combustion Technology Research

More information

Pure vegetable oil for Non-Road Diesel engines

Pure vegetable oil for Non-Road Diesel engines Pure vegetable oil for Non-Road Diesel engines Andreas Hubert Chair of internal combustion engines Conference: The future of pure plant oil as local fuel 26.01.2010 Lyon, France Agenda 1) Presentation

More information

SONIC PROPULSION SYSTEM, AN OVERALL VIEW OF POSSIBLE SOLUTIONS

SONIC PROPULSION SYSTEM, AN OVERALL VIEW OF POSSIBLE SOLUTIONS SONIC PROPULSION SYSTEM, AN OVERALL VIEW OF POSSIBLE SOLUTIONS Horia Abaitancei *, Dan Abaitancei, Gheorghe-Alexandru Radu, Sebastian Radu, Mihaela Coldea, Alexandru Lupa Transilvania University of Brasov

More information

CORE. Chris Such, Ricardo

CORE. Chris Such, Ricardo CORE CO 2 REduction for long distance transport Chris Such, Ricardo On behalf of CORE Project Coordinator Johan Engstrom, Volvo CORE Vision CO2RE focus is on highly efficient drivelines for long distance

More information

GT Conference 2017: Simulation Tool for Predictive Control Strategies for an ORC- System in Heavy Duty Vehicles

GT Conference 2017: Simulation Tool for Predictive Control Strategies for an ORC- System in Heavy Duty Vehicles GT Conference 217: Simulation Tool for Predictive Control Strategies for an ORC- System in Heavy Duty Vehicles October 9-1, 217 Dipl.-Ing. Jörg Kreyer M.Sc. Prof. Dr.-Ing. Thomas Esch FH Aachen FH Aachen

More information

Performance Enhancement of Multi-Cylinder Common Rail Diesel Engine for Automotive Application

Performance Enhancement of Multi-Cylinder Common Rail Diesel Engine for Automotive Application Performance Enhancement of Multi-Cylinder Common Rail Diesel Engine for Automotive Application SUNDHARAM K, PG student, Department of Mechanical Engineering, Internal Combustion Engineering Divisions,

More information

Air Injection for Internal Combustion Engines. George C. K. Chen Oct. 7th, 2013 US patent #

Air Injection for Internal Combustion Engines. George C. K. Chen Oct. 7th, 2013 US patent # Air Injection for Internal Combustion Engines George C. K. Chen Oct. 7th, 2013 US patent #8434462 Agenda Efficiency and power loss due to 10% residual exhaust gas in cylinder Existing Solutions Proposed

More information

Insight in the Development of MAN s Game Changing 45/60CR Engine Portfolio

Insight in the Development of MAN s Game Changing 45/60CR Engine Portfolio Insight in the Development of MAN s Game Changing 45/60CR Engine Portfolio Alexander Knafl, PhD Head of Advanced Engineering & Exhaust Aftertreatment MAN Diesel & Turbo, Germany < 1 > Disclaimer All data

More information

Electrical 48-V Main Coolant Pump to Reduce CO 2 Emissions

Electrical 48-V Main Coolant Pump to Reduce CO 2 Emissions DEVELOPMENT Cooling Electrical 48-V Main Coolant Pump to Reduce CO 2 Emissions Mahle has developed an electrical main coolant pump for the 48-V on-board net. It replaces the mechanical pump and offers

More information

2.61 Internal Combustion Engines

2.61 Internal Combustion Engines Due: Thursday, February 19, 2004 2.61 Internal Combustion Engines Problem Set 2 Tuesday, February 10, 2004 1. Several velocities, time, and length scales are useful in understanding what goes on inside

More information

Wood-to-Wheels Engines and Vehicles Research

Wood-to-Wheels Engines and Vehicles Research -Wheels Engines and Vehicles Research Dr. Jeff Naber Associate Professor ME-EM Department Michigan Tech University j.naber@mtu.edu Tel: 906.487.1938 1 Advanced Power Systems Research Center Advanced IC

More information

Advanced Propulsion/Powertrain Track

Advanced Propulsion/Powertrain Track Advanced Propulsion/Powertrain Track The Powertrain, Fuels and Lubricants sessions focus on information in the area of properties, selection, processing, performance, use, and effects of fuels and lubricants

More information

GASOLINE DIRECT INJECTION IN SI ENGINES B. PAVAN VISWANADH P. ASHOK KUMAR. Mobile No : Mobile No:

GASOLINE DIRECT INJECTION IN SI ENGINES B. PAVAN VISWANADH P. ASHOK KUMAR. Mobile No : Mobile No: GASOLINE DIRECT INJECTION IN SI ENGINES SUBMIT TED BY B. PAVAN VISWANADH P. ASHOK KUMAR Y06ME011, III/IV B. Tech Y06ME003, III/IV B. Tech Pavan.visu@gmail.com ashok.me003@gmail.com Mobile No :9291323516

More information

Designing Efficient Engines: Strategies Based on Thermodynamics

Designing Efficient Engines: Strategies Based on Thermodynamics Designing Efficient Engines: Strategies Based on Thermodynamics Jerald A. Caton Texas A&M University College Station, TX for CRC Advanced Fuel & Engine Workshop Hyatt Regency Baltimore Inner Harbor Baltimore,

More information