Corken Pumps. Corken Coro-Flo Regenerative Turbine Pumps. Corken C Series Coro-Flo Pumps. Corken F Series Coro-Flo Pumps
|
|
- Gwendolyn Cunningham
- 5 years ago
- Views:
Transcription
1 Corken Coro-Flo Regenerative Turbine Pumps The regenerative turbine pump is the most dependable LP gas pump on the market. The free floating impeller with teeth cut on both sides picks up the fluid and creates a spiraling motion around the circumference of each side. The fluid is slightly accelerated and pressurized in dozens of small steps creating a smooth, quiet, overall product flow. With only a single pump seal and it s free-floating impeller, the maintenence on these pumps is easy and very infrequent. Corken C Series Coro-Flo Pumps Extremely quiet and free of vibration and pulsation, the Coro-Flo pump provides trouble-free service and long life. For lowcapacity, medium-head pumping such as cylinder filling, the C-Series is the pump of choice. Capacity C10-SM 7 1-1/ Phase 80# C12-SM / Phase 90# C13-SM / Phase 130# C / Phase 150# C12 Corken F Series Coro-Flo Pumps Same features and reliability as the C models but used for base mounting with standard foot mounted motors. voltage, phase etc. can be selected to suit the individual application. Commonly used to feed vaporizing and aerosol systems. Capacity F /4 1 3/4 F /2 1 1 F / # F /2 1 3 F /2 1 3 F12 Corken FF Series Coro-Flo Pumps The FF075 and FF150 pumps are designed for larger capacity or higher differential pressure applications. Exceptionally well suited for larger motor fuelling, vaporizer feed systems in both aboveground and underground tank applications. FF / FF / # FF075 Typical Mounting 94
2 Corken Coro-Vane Sliding Vane Pumps The sliding vane pump is the most popular type of pump in the LP gas industry for higher flow rate applications. In this type of pump, a slotted rotor is eccentrically supported in a cycloidal cam creating a crescent cavity between the rotor and the cam. The sliding vanes sweep the incoming fluid to the opposite side of the crescent where it is squeezed through discharge holes in the cam toward the pump outlet. Because the vanes must always firmly contact the cam, special porting is designed into these pumps which routes discharge pressure under the vanes to keep them retracted from the rotor. Corken Coro-Vane Stationary Pumps Corken Coro-Vane pumps utilize the sliding-vane design to ensure pumping efficiencies remain high throughout the life of the pump. The vanes are self-adjusting for wear. Coro-Vane pumps are positive displacement pumps. They produce up to a maximum differential pressure of 125 PSIG. Three models are offered with capacities up to 350 GPM. STD /2 NPT 2 NPT 5 132# Z NPT 3 NPT # Z Flange 3 Flange # * Capacity based on 780 RPM and 40 PSID. ** Other inlet and outlet configurations available on request. Z3500 Typical Z3500 Installation 95
3 Corken Coro-Vane Truck Pumps The Corken Z-Series truck pumps offer some remarkable improvements over competitive designs. Rotor Centering - thrust bearings in addition to heavy duty roller bearings keep the rotor from grinding thru the endplates. Blade Life - large diameter, low mass blade drivers won t drive thru the blades even at elevated speeds. Cavitation - new design blades, push rods and liner allow speeds up to 800 RPM. Auxilliary Z Flange 2 NPT 2 NPT 140# Z Flange 2 NPT Dual 2 NPT 275# * Capacity based on 800 RPM and 50 PSID. Z4200 Transport Pump End View Side View Mounted on Internal Valve Z4200 Transport Pump Mounted on Internal Valve Typical Transport Mounting 4 Z
4 Corken Pump Bypass Valves Capacity Range & B166 3/4 Up to 40 3/4 B166 1 Up to 40 1 T / /4 T / /2 9# B166, T166 B166 Series The B166 is used on cylinder filling pumps as well as aerosol feed pumps. It incorporates a priming valve for vapor elimination and operates with a moderate pressure build-up. ZV # B # B /2 2-1/2 T166 Series The T166 is used on larger capacity pumps such as bulk delivery trucks. It incorporates a continuous internal bleed for vapor elimination and operates with a moderate pressure build-up. B177 Series The B177 is used on large capacity pumps. It requires an external sensing line and operates with a low pressure build-up. Return to Tank To Load B177 Typical Bypass Arrangement ZV200 Bypass The ZV200 is used on both truck and stationary applications. It incorporates continuous internal bleed for vapor elimination and operates with low pressure build-up. ZV200 Corken Flo-Chek Valves The Flo-Chek enables you to detect flow in gas or liquid lines and prevents release of product from storage tank in the event of a line failure. Flow-indicating and back-check valves feature all ductile iron construction and are available in 1-1/4 through 4 NPT or 2 through 4 slip-on weld flange configurations. & FC /4 FC /2 8# Reading The Flo-Chek Valve FC200 FC200 2 FC /2 30# FC # FC400 4 No Flow Erratic Flow Full Flow 97
5 Corken Oil-Free Compressors Corken gas compressors are designed for use in liquid transfer, vapor recovery, scavenger and portable applications. Whether it is gas recovery from cylinders or barge unloading, Corken has a compressor for your application The 107 bulk plant gas compressor unit is complete with pressure gauges, steel baseplate, mechanical liquid trap, four-way valve, strainer, interconnecting piping, adjustable driver slide base, v-belt drive and belt guard ready to receive an electric motor. This standard unit is typically used for liquid transfer and vapor recovery in applications including rail car and truck loading and unloading. Max Capacity Max Capacity CFM STD Bare /4 NPT 3/4 NPT 5 145# 260# /4 NPT 3/4 NPT 5 190# 305# /4 NPT 1-1/4 NPT # 480# NPT 1-1/2 NPT # 850# Typical Compressor Transfer System 98
Model Z4500 Stationary Pump
LPGCVP3C Sales Catalog for Stationary and Truck Pumps Model Z32 Truck Pump Model Z35 Stationary and Truck Pump Model Z45 Stationary Pump Model C51 Direct-Coupled Mounting Model 121 Stationary Coro-Vane
More informationCoro-Flo Sales Catalog
LPGCFP100C LPG Pumps Coro-Flo Sales Catalog FF-Model DL-Model DLF-Model C-Model Table of Contents General Information What is a Coro-Flo Pump...3 History of the Coro-Flo Pump... 4 Markets Served... 4 Model
More informationLPG-Series. Pumps and Compressors. For LPG and NH 3 Stationary Applications
LPG-Series Pumps and Compressors For LPG and NH 3 Stationary Applications A Tradition of Excellence Corken, Inc. is recognized as a world leader in the manufacture of LPG pumps and compressors. Corken
More informationLPG-Series. Compressors and Stationary Pumps for LPG and NH 3 Bulk Plant Applications. Solutions beyond products... A Unit of IDEX Corporation
LPG-Series Compressors and Stationary Pumps for LPG and NH 3 Bulk Plant Applications Model SC24 Pump Model 491 Compressor Model C12 Pump Model Z4500 Pump Model HG602 Compressor Solutions beyond products...
More informationUnderground Tank Applications Installation Guide
IF Underground Tank Applications Installation Guide Coro-Flo Pumps Background: Because of the environmental problems caused by traditional fuels such as gasoline and diesel, the use of alternative fuels,
More informationLPG-Series. Compressors and Stationary Pumps for LPG and NH 3 Bulk Plant Applications. A Unit of IDEX Corporation.
LPG-Series Compressors and Stationary Pumps for LPG and NH 3 Bulk Plant Applications Model Z45 Pump Model 491 Compressor Model C12 Pump Model HG62 Compressor A Unit of IDEX Corporation A Tradition of Excellence
More informationZ-Series. Coro-Vane Truck Pumps. For LPG, NH 3, and other Applications
Z-Series Coro-Vane Truck Pumps For LPG, NH 3, and other Applications A Tradition of Excellence Corken, Inc. is recognized as a world leader in the manufacture of LPG pumps and compressors. Corken s exceptional
More informationAUTOGAS 150 SERIES PUMPS INSTALLATION GUIDELINES FOR UNDERGROUND TANK APPLICATIONS
Application Bulletin A Unit of IDEX Corporation No. 13 June 21 AUTOGAS 1 SERIES PUMPS INSTALLATION GUIDELINES FOR UNDERGROUND TANK APPLICATIONS CORKEN, INC. A Unit of IDEX Corporation P.O. Box 12338, Oklahoma
More informationD1AFF Fleet Fueling Dispensers
D1AFF Fleet Fueling Dispensers (Mechanical Register) 6102 One in a series of the finest dispensers, all designed with you in mind. Compare these features & benefits Compact D1AFF Aluminum Cabinet 1" Neptune
More informationTopic 1. Basics of Oil Hydraulic Systems
Topic 1. Basics of Oil Hydraulic Systems Fluid power Fluid power is the technology that deals with the generation, control and transmission of forces and movement of mechanical element or system with the
More informationPV Series Vane Truck Pumps
PV Series Vane Truck Pumps ISO 900-008 PV Series Pumps General Introduction Versa vane truck pumps are specifically designed to comply with the pumping requirements demanded by the LPG industry. Bulk delivery
More informationLIQUEFIED GAS PUMP INSTALLATION
LIQUEFIED GAS PUMP INSTALLATION Z400C ENGINEERING DATA AND DESIGN HANDBOOK THE APPLICATION OF PUMPS TO LIQUEFIED GAS TRANSFER Although we cannot change the nature of the liquefied gas, there are many things
More informationPositive Displacement Pumps and Oil-Free Gas Compressors
BULLETIN 1-1 Section: 1 Effective: December 2 Replaces: May 2 Positive Displacement Pumps and Oil-Free Gas Compressors For Liquefied Gas Applications Military Marine Chemical Industrial Sanitary Energy
More informationIndustrial Pump Catalog
Industrial Pump Catalog Contents Why Corken?........................................................................ i-5 About This Catalog...................................................................
More informationFGMDLPG-1 Flow Meter FGMDLPG-1 flow meter is made by cast Aluminum, small size, light weight, used in Liquid Gas Dispenser. Max 5~60L Discharge rate per revolution : 0.5L/r Adjustable Minimum Volume: 0.001
More informationPositive Displacement Pumps and Oil-Free Gas Compressors for Liquefied Gas Applications
Spec Sheet 1-1 Section: 1 Effective: November 21 Replaces: June 21 Positive Displacement Pumps and Oil-Free Gas Compressors for Liquefied Gas Applications Blackmer Liquefied Gas Pumps & Compressors Durability
More informationPositive Displacement Pumps and Oil-Free Compressors for Liquefied Gas Applications
Spec Sheet 1-1 Section: 1 Effective: October 212 Replaces: October 21 Positive Displacement Pumps and Oil-Free Compressors for Liquefied Gas Applications Blackmer Liquefied Gas Pumps & Compressors Durability
More informationINTRODUCTION: Rotary pumps are positive displacement pumps. The rate of flow (discharge) of rotary pump remains constant irrespective of the
INTRODUCTION: Rotary pumps are positive displacement pumps. The rate of flow (discharge) of rotary pump remains constant irrespective of the pressure. That is, even at very high pressure, these pumps can
More informationDescribe the function of a hydraulic power unit
Chapter 7 Source of Hydraulic Power Power Units and Pumps 1 Objectives Describe the function of a hydraulic power unit and identify its primary components. Explain the purpose of a pump in a hydraulic
More informationIF102F Installation, Operation & Maintenance Manual Models 060, 075 and 150 Coro-Flo Pumps
IF102F Installation, Operation & Maintenance Manual Models 060, 075 and 150 Coro-Flo Pumps Frame Mount ANSI Flange (FF) and DIN Flange (FD) Direct Mount ANSI Flange (DLF) and DIN Flange (DLD) Warning:
More informationAppendix B Specifications for Vertical Single-Acting Models
Appendix B Specifications for Vertical Single-Acting Models 9 69 Equipment Type and Options Single-acting, vertical, reciprocating piston type vapor compressor Single packed rod NPT or Class 300 RF connections
More informationModel 133 Models 134 & 135 AURORA 130 SERIES SINGLE STAGE TURBINE TYPE PUMPS
Model Models 4 & AURORA 0 SERIES SINGLE STAGE TURBINE TYPE PUMPS WWW.AURORAPUMP.COM AURORA 0 SERIES Single Stage Turbine Type Pumps Capacities to 0 G.P.M. Heads to 700 Ft. Temperatures to F A Pioneer in
More informationInstallation, Operation & Maintenance Manual
IF102B Installation, Operation & Maintenance Manual Coro-Flo Pumps 150 Models Direct Mount Frame Mount Warning: (1) Periodic inspection and maintenance of Corken products is essential. (2) Inspection,
More informationSolutions beyond products...
ORIGINAL INSTRUCTIONS IF0M Installation, Operation & Maintenance Manual Regenerative Turbine Pumps for LPG, NH 3, and Many Other Liquefied Gases and Thin Liquids All Models 0, 2, 3, 4, 6, and 7 DL-Model
More informationGENERAL OVERVIEW BRONZE PEDESTAL ROTARY GEAR N13HDM C992 BRONZE BRONZE HELICAL ROTOR 101BG RUBBER
GENERAL OVERVIEW BRONZE CLOSE COUPLED N970 BRONZE PEDESTAL N4000R BRONZE PEDESTAL ROTARY GEAR N13HDM PLASTIC CENTRIFUGAL 144 RUBBER ROLLER 310F BRONZE CENTRIFUGAL 50P DUCTILE IRON CLOSE COUPLED C992 BRONZE
More informationInstallation, Operation & Maintenance Manual
IH106 Installation, Operation & Maintenance Manual ZV200 Bypass Valve Model ZV200 Bypass Valve Warning: (1) Periodic inspection and maintenance of Corken products is essential. (2) Inspection, maintenance
More informationRegenerative Turbine Pumps
Bulletin E4 November 009 E4 T4 Series Regenerative Turbine Pumps Capacities to GPM Heads to 600 Feet Temperatures to 00 F MTH PUMPS MTH E4 T4 Series Close-coupled and pedestal mounted regenerative turbine
More informationPOSITIVE DISPLACEMENT BLOWERS & VACUUM PUMPS. DuroFlow Industrial Series
POSITIVE DISPLACEMENT BLOWERS & VACUUM PUMPS DuroFlow Industrial Series It s all about. the DuroFlow The DuroFlow Series combines a proven bi-lobe design with on-the-job experience to deliver reliable,
More informationHeliFlow Industrial Series. Positive Displacement Blowers & Vacuum Pumps
HeliFlow Industrial Series Positive Displacement Blowers & Vacuum Pumps 2008 2 GD HeliFlow Built By the Industry Leaders Gardner Denver Tradition Quality Innovation Results GD HeliFlow HeliFlow integrates
More informationA pump is a machine used to move liquid through a piping system and to raise the pressure of the liquid.
What is a pump A pump is a machine used to move liquid through a piping system and to raise the pressure of the liquid. Why increase a liquid s pressure? Static elevation a liquid s pressure must be increased
More informationTest Which component has the highest Energy Density? A. Accumulator. B. Battery. C. Capacitor. D. Spring.
Test 1 1. Which statement is True? A. Pneumatic systems are more suitable than hydraulic systems to drive powerful machines. B. Mechanical systems transfer energy for longer distances than hydraulic systems.
More informationRegenerative Turbine Pumps
Bulletin M M Series Regenerative Turbine Pumps Capacities to 8 GPM Heads to Feet MTH M Series Vertical base mount and horizontal pedestal mounted multi-stage regenerative turbine pumps represent the most
More informationSolutions beyond products...
ORIGINAL INSTRUCTIONS ID107E Installation, Operation & Maintenance Manual PZ-Series Sliding-Vane Truck Pumps for Refined Petroleum Products and Industrial Solvents PZ7 Model with Standard Bypass Valve
More informationChapter 6. Supercharging
SHROFF S. R. ROTARY INSTITUTE OF CHEMICAL TECHNOLOGY (SRICT) DEPARTMENT OF MECHANICAL ENGINEERING. Chapter 6. Supercharging Subject: Internal Combustion Engine 1 Outline Chapter 6. Supercharging 6.1 Need
More informationDetergents. Bulk Plants Cylinder Filling Bulk Distribution Transportation Auto Fuel Liquid Terminals Refineries
Detergents 1 Bulk Plants Cylinder Filling Bulk Distribution Transportation Auto Fuel Liquid Terminals Refineries The LPG and NH 3 Industry Corporate Overview Blackmer is part of Dover Corporation, a multi-billion
More informationTHE LEADING FORCE behind liquids since 1857
THE LEADING FORCE behind liquids since 1857 High Capacity Bulk Liquid Handling Pumps - For loading/unloading transport truck tankers, railway tank cars, and barges - High flow rate transfer capability
More informationSolutions beyond products...
ORIGINAL INSTRUCTIONS IH102C Installation, Operation & Maintenance Manual Model B177 External Automatic Bypass Valve Model B177 External Automatic Bypass Valve Warning: (1) Periodic inspection and maintenance
More informationRegenerative Turbine Pumps
Bulletin E4 July E4/T4 Series Regenerative Turbine Pumps Capacities to GPM Heads to 6 Feet Temperatures to F MTH E4/T4 Series Close-coupled and pedestal mounted regenerative turbine pumps represent the
More informationquincy qsg series QuincyCompressor.com Made in the U.S.A. Performance You Demand. Reliability You Trust. options & Accessories Applications
QUINCY qsg SERIES rotary screw gas compressor quincy qrng series reciprocating gas compressor natural gas compressors quincy qsg series rotary screw gas compressor durable design Quincy QSG rotary gas
More informationRegenerative Turbine Pumps
Bulletin T June 04 T E Series Regenerative Turbine Pumps Capacities to 40 GPM Heads to 700 Feet Temperatures to 00 F MTH PUMPS MTH T E Series Close-coupled and pedestal mounted regenerative turbine pumps
More informationA Series General Purpose Pumps General Purpose Pumps for Pressure Lubrication, Hydraulic Service, Fuel Supply and General Transfer
THE LEADING FORCE behind liquids since 1857 A Series General Purpose Pumps General Purpose Pumps for Pressure Lubrication, Hydraulic Service, Fuel Supply and General Transfer The Roper Pump Family of Gear
More informationCONCEPTUAL DESIGN OF A NEW TYPE OF ENGINE FOR VARIOUS APPLICATIONS WITH EXPECTED 10% HIGHER OVERALL EFFICIENCY
International Journal of Mechanical and Production Engineering Research and Development (IJMPERD ) Vol.1, Issue 2 Dec 2011 58-65 TJPRC Pvt. Ltd., CONCEPTUAL DESIGN OF A NEW TYPE OF ENGINE FOR VARIOUS APPLICATIONS
More informationMODELS 44 ARA 44 ARAC 44 RA4 44 RA2
General Safety and Maintenance Manual Model 44ARA Angle Grinder with 4 guard. Model 44ARAC Angle Grinder with built in 1/4 collet for use with carbide burrs. Model 44ARAZ Angle Grinder with spiral cool
More informationCoro-Vane Maintenance CP471. and Disassembly
Coro-Vane Maintenance CP471 and Disassembly CoroVane Pumps Pumps all have discharge and suction pressure openings. The following slides depict a 1021, but all standard pumps are repaired the same. Grease
More informationModule 13: Mechanical Fuel Injection Diagnosis and Repair
Terms and Definitions Parts of Injection Nozzles Types of Nozzle Valves Operation of an Injection Nozzle Fuel Flow Through the Unit Injector Optional Features on Fuel Injection Pumps Main Parts of a Distributor-Type
More informationHeliFlow Industrial Series. Positive Displacement Blowers & Vacuum Pumps
HeliFlow Industrial Series Positive Displacement lowers & Vacuum Pumps 2 GD HeliFlow uilt y the Industry Leaders GD HeliFlow HeliFlow integrates proven experience with blower design and manufacturing techniques
More informationRegenerative Turbine Pumps
Bulletin 40 October 008 40 40 80 80 Series Regenerative Turbine Pumps Capacities to 60 GPM Heads to 800 Feet MTH PUMPS 40 40 80 80 Series regenerative turbine pumps represent the most economical, high
More informationNOTE: Visit our website at for video repair procedures, under the Tools section.
Repair Instructions Hypro Repair Tools: Tool Box No. 3010-0168 1/4" Allen Wrench No. 3020-0008 Support Bars (2) No. 3010-0064 Port Brush No. 3010-0066 1/16" Allen Wrench No. 3020-0009 Brush Holder No.
More informationRegenerative Turbine Pumps
Bulletin 0 0 2 0 2 170 270 Series Regenerative Turbine Pumps Capacities to 0 GPM Heads to Feet MTH PUMPS 0 2 0 2 170 270 Series Regenerative Turbine Pump MTH 0 2 0 2 170 270 Series regenerative turbine
More informationSuction Diffusers. Applications PROTECTION PUMP. Pressures to 790 PSIG Temperatures to 800ºF FEATURES MATERIALS END CONNECTIONS SIZE RANGES RATINGS
Applications Process Industry Metals and Mining Power Industry Water and Waste Chemical Industry Pulp and Paper Oil and Gas Suction Diffusers Pressures to 790 PSIG Temperatures to 800ºF FEATURES Filtration
More informationVIKING. Series LVP STAINLESS STEEL VANE PUMP. VIKING PUMP A Unit of IDEX Corporation Cedar Falls, IA 2016 PRODUCT DESCRIPTION SERIES OPERATING RANGE
Page 445.1 PRODUCT DESCRIPTION Rotary vane pumps are used for liquid transfer in applications ranging from chemicals to LP gas. Vanes extend from slots on the rotor, sweeping liquid through a cam-shaped
More informationUNIVERSAL PRODUCT LINE: STEEL EXTERNALS JACKETED PUMPS TABLE OF CONTENTS SERIES DESCRIPTION RELATED PRODUCTS OPERATING RANGE
SERIES 4223, 4323 (API 682 Seal) Section 304 Page 304. TABLE OF CONTENTS Features & Benefits...2 Revolvable Pump Casings...2 Materials of Construction...2 Cutaway View & Pump Features...3 Key...4 Specifications...4
More informationPOSITIVE DISPLACEMENT BLOWERS & VACUUM PUMPS. HeliFlow Industrial Series
POSITIVE DISPLACEMENT LOWERS & VACUUM PUMPS HeliFlow Industrial Series It's all about... the HeliFlow The HeliFlow Series integrates proven experience with blower design and manufacturing techniques to
More informationRS Multi-Stage, Ring Section Pumps
RS Multi-Stage, Ring Section Pumps Technical Specification Pages This page left intentionally blank. 1.0 Overview. The RS Series is Carver s multi-stage pump for fluids at moderate to high pressures. The
More informationAttention is drawn to the following places, which may be of interest for search:
CPC - F04B - 2017.08 F04B POSITIVE DISPLACEMENT MACHINES FOR LIQUIDS; PUMPS (machines for liquids, or pumps, of rotary piston or oscillating piston type F04C; non-positive displacement pumps F04D; pumping
More informationPIPELINE INJECTION PRODUCTS
PIPELINE INJECTION PRODUCTS DURABLE & RELIABLE SOLUTIONS PIPELINE INJECTION PUMP GP-10 & GP-1 SERIES Flows up to: 210 GPM / BPH / 7,20 BPD (nominal flow) BUSHINGS BACK PULL OUT SEAL HEAD DRIVER SHAFT DRIVEN
More informationVIKING. Series LVP. VIKING PUMP A Unit of IDEX Corporation Cedar Falls, IA Section 445 Page Issue C
VIKING Section 445 Page 445.1 Issue C PRODUCT DESCRIPTION Rotary vane pumps are used for liquid transfer in applications ranging from chemicals to LP gas. Vanes extend from slots on the rotor, sweeping
More informationElectric Diesel Pump EDP/12, EDP/24
INSTRUCTION MANUAL Electric Diesel Pump EDP/1, EDP/4 S1940, Rev C Congratulations on purchase of this World Class Electric Diesel Pump! Portable Diesel transfer pumps designed for everyday use in Agricultural,
More informationTUTHILL OIL-SEALED ROTARY VANE PRODUCT LINE
TUTHILL OIL-SEALED ROTARY VANE PRODUCT LINE AGENDA Principle of Operation Product Introduction Product Overview Pump Sizes End Pressures Vane Material Accessories Oil Preventive Maintenance Competitors
More informationSyntron Pneumatic Vibrators
Pneumatic Vibrators Syntron Pneumatic Vibrators Syntron Material Handling offers two types of Syntron Pneumatic Vibrators turbine and piston. Turbine models feature rotary action designed to keep noise
More informationAutomatic Recirculation Valves One Step Centrifugal Pump Minimum Flow Protection
Automatic Recirculation s One Step Centrifugal Pump Minimum Flow Protection HPM Series ENGINEERINGInc. Portage Avenue, Three Rivers, MI USA Phone: -7- Fax: -78-7 Centrifugal Pumps Require Protection If
More informationCASING COVER PLATE LUBRICATION GASKETS PRESSURE RELIFE VALVE SEAL OPTIONAL EQUIPMENT
Series: PFSPT Self-Priming Centifugal Pumps Size: x, Solids -1/ DISCHARGE x, lbs. Flange LIQUID TEMPERATURE 1 F CASING IMPELLER SHAFT SHAFT SLEEVE WEAR RING COVER PLATE FLAP VALVE Gray Iron ASTM A- Class
More informationCLARK SOLUTIONS S Series Rotary Gear Pump Pressure to 200 PSI, Flow to 32 GPM, Drive Speed to 1800 RPM
CLARK SOLUTIONS S Series Rotary Gear Pump Pressure to 200 PSI, Flow to 32 GPM, Drive Speed to 1800 RPM DESCRIPTION Series S pumps are general purpose positive displacement gear pumps and are a good choice
More informationM50 L50 Series Multistage Regenerative Turbine Pumps
Page M- MTH PUMPS M L Series Multistage Regenerative Turbine Pumps Capacities to 4 GPM Heads to Feet Single or Multi-stage Units (up to stages) Vertical Close Coupled Horizontal Close Coupled Horizontal
More informationSolutions beyond products...
ORIGINAL INSTRUCTIONS IP00B Installation, Operation & Maintenance Manual Stationary & Mobile Sliding-Vane Pumps for Industrial Applications All Models 5, 52, 72, 02, 32, and 52 D5 Model CDHN052 Model CDBN02
More informationYStrainers. Applications. Pressures to 3705 PSIG Temperatures to 800ºF FEATURES MATERIALS END CONNECTIONS RATINGS SIZES
Applications Process Industry Metals and Mining Power Industry Water and Waste Chemical Industry Pulp and Paper Oil and Gas YStrainers Pressures to 3705 PSIG Temperatures to 800ºF FEATURES Low pressure
More informationLIQUID-SPECIFIC PRODUCT LINE: STAINLESS STEEL VANE PUMPS PRODUCT DESCRIPTION SERIES OPERATING RANGE 1 NOMINAL FLOW RATES 2
Page 445.1 PRODUCT DESCRIPTION SERIES OPERATING RANGE 1 Rotary vane pumps are used for liquid transfer in applications ranging from chemicals to LP gas. Vanes extend from slots on the rotor, sweeping liquid
More information8L SERIES THREE SCREW PUMPS
TM 8L SERIES THREE SCREW PUMPS The reliable pump people ROTARY SCREW PUMPS Performance Shown at 1500 PSID (103 BAR), 200 SSU (43 CST) 60 HZ: 870 1150 1750 50 HZ: 960 1450 1200 1100 630M 40 250 1000 900
More informationNMSU FIRE DEPARTMENT FIRE PUMP ACCEPTANCE TEST
Date Documents Submitted: Log No.: File No.: Plan Examiner: Permit No.: Property Information Building Name: Building Address: Building Manager's Name: Building Manager's Phone: Fax: System Designer/Contractor
More informationSECTION H3 TRAYMASTER SERIES DEAERATORS
SECTION H3 TRAYMASTER SERIES DEAERATORS SAMPLE SPECIFICATIONS PART 1 GENERAL... H3-12 1.1 Packaged Deaerator Specification... H3-12 PART 2 PRODUCTS... H3-12 2.1 Deaerator... H3-12 2.2 Deaerator Vessel...
More informationTYPE E Main Valve Sizes 3 /8 through 12
Technical Data SD 3001E PRINTED IN U.S.A. SD 3001E/9709 SPENCE ENGINEERING COMPANY, INC. 150 COLDENHAM ROAD, WALDEN, NY 12586-2035 A B TYPE E MAIN VALVE FACE TO FACE DIMENSIONS C D E DIMENSIONS (inches)
More informationHydraulic Pumps Classification of Pumps
Fluidsys Training Centre, Bangalore offers an extensive range of skill-based and industry-relevant courses in the field of Pneumatics and Hydraulics. For more details, please visit the website: https://fluidsys.org
More informationFul-Vane Gas Compressor
Ful-Vane Gas Compressor More compression, less energy Developed from Fuller design and technology, FLSmidth s Ful-Vane Gas Compressors provide more compression with less energy: Large inlet area provides
More informationRotary Lobe Blowers. Omega Series Blower Blocks Flows to 5650 cfm Pressures up to: 15 psig Vacuum down to: 15 Hg. kaeser.com
Rotary Lobe Blowers Omega Series Blower Blocks Flows to 5650 cfm Pressures up to: 15 psig Vacuum down to: 15 Hg kaeser.com Omega Series Blower Blocks Superior Quality and Performance Kaeser s Omega line
More informationLSC Series. Open Drive Large Screw Compressors. Fifteen Displacements. 50-2,500 TR (176-8,785 kw) 278-3,336 CFM 100-2,200 HP
Open Drive Large Screw Compressors Fifteen Displacements 50-2,500 TR (176-8,785 kw) 278-3,336 CFM 100-2,200 HP Designed for Refrigeration, Air- Conditioning, and Process Applications Field Serviceable
More informationFLORIDA RURAL WATER ASSOCIATION 2970 Wellington Circle Tallahassee, FL Telephone: ~ Fax:
FLORIDA RURAL WATER ASSOCIATION 2970 Wellington Circle Tallahassee, FL 32309-6885 Telephone: 850-668-2746 ~ Fax: 850-893-4581 Lift Station Bypass Pump & Connection Assembly Instructions Loss of power during
More informationRegenerative Turbine Chemical Pumps for the Process Industry
www.rothpump.com BULLETIN 1C99 Regenerative Turbine Chemical Pumps for the Process Industry Continuous high pressure pumping of non-lubricating, corrosive, liquefied gasses and liquids at boiling point
More informationAppendix D Outline Dimensions for Model Z2000
INTERNAL RELIEF VALVE SET AT 150 P.S.I. Appendix D Outline Dimensions for Model Z2000 16 (0.61) 1/" x 1-9/16" square key 2-1/8 (5.0) NOT FOR RECIRCULATING INSTALLER TO PROVIDE SEPARATE BY-PASS VALVE SET
More informationapplication and are used in chemical injection systems (water
Mechanical Equipment - Course 430.1 POSITIVE DISPLACEMENT PUMPS In the previous lesson it was explained that although centrifugal pumps have many operational and maintenance adva.ntages over positive displacement
More informationHD and HDL Single-Stage Non-Lube Gas Compressors
COMPRESSORS CB-324 2013/05 Ethylene Ethylene Oxide HCFC s Helium n-heptane n-hexane Hydrogen Hydrogen Chloride Hydrogen Sulfide Isobutane Isobutene Isobutylene Isopentane Methane Methanol Methyl Acetylene
More informationKW Submersible, Single-Vane Impeller
Sewage Pumps KW Submersible, Single-Vane Impeller Performance Curve Total Head (FT) Up to 2 Solids-Handling Heavy-Duty, Silicon Carbide Seals Stainless Steel Keyed Shaft Flows to 325 GPM / Heads to 95
More informationQuincy QT. Reciprocating Compressors 3-30 Horsepower. Highly Efficient Leading the industry with more CFM per brake hp
Quincy QT Reciprocating Compressors 3-30 Horsepower Highly Efficient Leading the industry with more CFM per brake hp Lasting Performance Heavy duty, cast iron construction ensures durability Enhanced Details
More informationPlastics & Packaging ONE STOP SHOPPING. Canada USA
T H E C O N V E Y I N G P R O D U C T S P E O P L E Plastics & Packaging C O N V E Y I N G P R O D U C T S G U I D E Canada 1-800-263-1942 USA 1-800-263-7782 sales@lorenz.ca www.lorenzproducts.com ISO
More informationWater Treatment Plant Maintenance Considerations. Operation and Maintenance. Types of Maintenance 5/1/15
Water Treatment Plant Maintenance 1 Operation and Maintenance Purpose of O&M maintain design functionality (capacity) restore the system components to their original condition and thus functionality. Effective
More informationCOOPERATIVE PATENT CLASSIFICATION
CPC F COOPERATIVE PATENT CLASSIFICATION MECHANICAL ENGINEERING; LIGHTING; HEATING; WEAPONS; BLASTING (NOTE omitted) ENGINES OR PUMPS F04 POSITIVE DISPLACEMENT MACHINES FOR LIQUIDS; PUMPS FOR LIQUIDS OR
More informationPRODUCT OBSOLETED 1Q16
VIKING HEAVY DUTY PUMPS FEATURES Section 6 Page 6. Issue C 9 SERIES 27 s Cutaway View (Packed Type) 60-200-280 GPM Sizes (36-45-64 m³/hr) Shown without over-pressure relief valve MECHANICAL SEAL (SERIES
More informationPumps. Air Blower DESCRIPTION. Air Blower. Air Blower Part. HS Regenerative Blowers
Air Blower HS Regenerative Blowers Capacities To 340 Cfm Pressures To 180 W.C 1/3 T0 11.5 H.P., In Voltages To Suit Most Applications Winding Embedded Thermal Protection Integral Inlet And Discharge Silencers
More informationCOOPERATIVE PATENT CLASSIFICATION
CPC F COOPERATIVE PATENT CLASSIFICATION MECHANICAL ENGINEERING; LIGHTING; HEATING; WEAPONS; BLASTING (NOTE omitted) ENGINES OR PUMPS F04 POSITIVE DISPLACEMENT MACHINES FOR LIQUIDS; PUMPS FOR LIQUIDS OR
More informationLUBE OIL PUMPS. Critical Lubrication Service for: Bearings Seals Gearboxes. on... Gas & Steam Turbines Compressors Engines Starting Packages
LUBE OIL PUMPS Critical Lubrication Service for: Bearings Seals Gearboxes on... Gas & Steam Turbines Compressors Engines Starting Packages LEADING SUPPLIER OF LUBE OIL PUMPS TO THE POWER GENERATION INDUSTRY
More informationAirscrew 200+ Vmax Vaneaxial Fans
Airscrew + Vmax Vaneaxial Fans General Vaneaxial Information Vmax Vaneaxial Fans comprise a combination of rotating impeller and stationary guide vanes, housed within an axial duct known as the fan case.
More informationPublication # EBSRAY PUMPS. R Series. (50Hz & 60Hz) Models RX10 & RX for Submersible LPG APPLICATIONS.
Publication # 1506-09 EBSRAY PUMPS R Series Models RX10 & RX10-60 (50Hz & 60Hz)...for Submersible LPG APPLICATIONS Quality ISO 9001 Submersible Pumpset Model RX10 (including RX10-60) EBSRAY MODEL RX10
More informationF04. Note. Notes. Int.Cl. ( ), Section F 1 XXXX F04B F04B
XXXX F04B F04B F04 POSITIVE-DISPLACEMENT MACHINES FOR LIQUIDS; PUMPS FOR LIQUIDS OR ELASTIC FLUIDS (portable fire extinguishers with manually-operated pumps A62C 11/00, with power-driven pumps A62C 25/00;
More informationWaterous S100 Single Stage Pump
The S100 Series end suction fire pump provides versatility in a smaller package. With a capacity of 2000 GPM (7570 L/min), the S100 Features a dynamic yet compact design, incorporating a ductile iron body
More informationQuality Value Assurance
Pump Selection Guide Quality Value Assurance In the beginning From it s inception in 1990 with one man in a service van, to the industry leader in innovative dairy solutions that DariTech is today, we
More informationSeries
MTH PUMPS 15 25 26 17 27 Series Flexible Coupled Capacities to 15 GPM Heads to 115 Feet Low NPSH Requirements Page 1-19 15 17 25 26 27 LIMITATIONS Discharge Pressure Seal Pressure* Suction Pressure (Min.)
More informationElectronic Control Valves
MODEL 131 Series (Full Internal Port) 631 Series (Reduced Internal Port) Electronic Control Valves Model 131-01/631-01 Simple Proven Design Quality Solenoid Pilot Controls Ideal For SCADA Systems Multi-Function
More informationDoosan XHP1170FCAT Bid Specifications
MANUFACTURER MODEL Doosan Infracore XHP1170FCAT ENGINE TIER 3 Make CATERPILLAR Model C-15 Number of Cylinders 6 Cylinder Bore (in/mm) 5.4 (137) Cylinder Stroke (in/mm) 6.73 (15.2) Displacement (cu in/l)
More informationOperator Installation & Instructions HERMETIC LIQUID REFRIGERANT PUMPS CAM AND CNF SERIES
(Auto Restart) (Alarm) (Manual Reset Button) (Auto Restart) (Motor Option) (Auto Restart) CORPORATION Bulletin Operator Installation & Instructions HERMETIC LIQUID REFRIGERANT PUMPS CAM AND CNF SERIES
More informationCompressor. MODEL 05G and 05G BUS $6.00
Compressor MODEL 05G and 05G BUS 6-0756 $6.00 OPERATION AND SERVICE MANUAL MODEL 05G and 05G BUS COMPRESSOR Carrier Transicold Division, Carrier Corporation, P.O. Box 805, Syracuse, N.Y. U. S. A. Carrier
More informationVIKING UNIVERSAL SEAL PUMPS. Heavy-Duty, Foot-Mounted Internal Gear Pumps With Multiple Seal Options. Operating Range1: Nominal Flow Rates:
VIKING UNIVERSAL SEAL PUMPS Section 630 Page 630.1 Heavy-Duty, Foot-Mounted Internal Gear Pumps With Multiple Seal Options Operating Range1: Cast Iron Series 124A/AE, 4124A/AE, 4124B, 324A, 4324A, 224A/AE,
More information