Min. Metered Flow Capacity L/min. Max. Oper. Pressure Kgf/cm (0.04)* F- FC G N -11 H01. Max. Metered Flow Capacity L/min.
|
|
|
- Loraine Hood
- 5 years ago
- Views:
Transcription
1 Flow Control These are pressure and temperature compensating type valves and maintain a constant flow rate independent of change in system pressure (load) and temperature (Viscosity of the fluid). They Control flow rate of the hydraulic circuit and eventually control speed of the actuator precisely. with an integral check valve allow a controlled flow and reverse free flow. Graphic Symbol FLOW CONTROLS EIC--- Specifications Model s Max. Metered Flow Capacity Min. Metered Flow Capacity Max. Oper. Pressure Kgf/cm Mass Kg (.)* * The Figure in the bracket is for pressures above Model esignatioin F- FC G - - -N - H Special Seals F: Special Seals for Phosphate Ester type Fluids (Omit if not required) Attachment Bolts Series F: Flow Control FC: Flow Control and Check Type of G: Sub-Plate Valve Size Max. Metered Flow Capacity : : : : : Valve Model Socket Head Cap Screw Qty Bolt Kit Model F G- M x Lg. BK-- F G- M x Lg. BK-- F G- M x Lg. BK-- Pres. Compensator Stroke Adjustment N: Applicable only for pres. Compensator stroke adjustment (Option) (Omit if not required) esign Special - H - H - H - H Option Pres. Compensator Stroke Adjustment Can reduce jumping at the start of the actuator.
2 Sub-plates Valve Model Sub-plate Model No. Thread Size Mass Kg. - M-X- / BSP.F. M-- / BSP.F. - M-X- / BSP.F. M-Y- / BSP.F. M-- / BSP.F. - M-X- / BSP.F. M-Y- / BSP.F. Sub plates are available. Specify Sub-Plates model from the table above. When Sub-Plates are not used the mounting surface should have good machined finish. Instructions FLOW CONTROLS Min. required pressure difference Min. differential pressure between inlet and outlet port is required to obtain the optimum pressure compensation. It varies according to the flow rate to be set. For details, please refer to the performance curve. Free flow Check Valve pressure drops vary with flow rates. If models with check valves are used, see free flow pressure drop characteristics. Flow Adjustment [F G-] Loosen locking screw and turn flow adjustment dial clockwise for increase, and anti-clockwise for decrease. The dial makes about revolutions from zero to full flow and the valve opening is indicated on the revolution indicator. (Refer to characteristic of Metered Flow vs. ial Position ) After flow adjustment, tighten locking Screw. [F G-/] --- Anticlockwise for increase and clockwise for decrease. Line Filter To carry out flow adjustments by as small degree as or less, be sure to use a line filter, µ or less, near the valve inlet. IMENSIONS IN MILLIMETRES F G H Locking Feature With Key Fully Extended Revolution Indicator Lock Screw. Hex. Soc. Revolution Indicator Fully Extended... ia. x Thru. UKEN R ia. Spotface Places Outlet or Reversed Free Flow Inlet Port ia. Pressure Compensator Stroke Adjustment (Only for ) - -N. Inlet or Reversed Free Flow Outlet Port. ia. Fully Extended. Locating Pin ia. Surface (O-Rings Furnished)
3 F G--- - F G--- -H Locking Feature With Key Fully Extended Fully Extended Locking Screw ia... ia. x Thru. ia. Spotface Places Inlet or Revered Free Flow Outlet Outlet or Revered Free Flow Inlet... ia.... Fully Extended IMENSIONS IN MILLIMETRES ia. Locating Pin Surface (O-Ring Furnished) F G--- - F G--- -H Locking Feature With Key Fully Extended Fully Extended Revolution Indicator ia. x Thru.. ia. Spotface Places. Inlet or Reversed Free Flow Outlet Controlled flow Outlet or Reversed Free Flow Inlet... Locking Screw ia.. Pressure Compensation Stroke Adj. for 'N' Fully Extended Models only... ia. ia. Locating Pin Places Surface (O-Ring Furnished)
4 Sub-Plates M-X-. ia. x Thru. ia Spotface Places... / BSP.F Thd. Place (From Rear) M Thd. x eep Place IMENSIONS IN MILLIMETRES ia. Places. ia. x eep M-X- Y. ia. x Thru. ia. Spotface Places.. B.. "A" ia. x Places M Thd. x eep Places ia. x eep Sub-plate Model "" Thd. Weight Approx. Kg. M-- /. M-X- /. M-Y- /... C.. Sub-plate Model A B C M--.. M-X-.. M-Y- "" Thd. Places (From Rear) M-X- Y G... F.... E "" ia. Places "B" Thd. x "C" eep Places.. H. ia. x eep Places "A" Thd. Places (From rear). Sub-Plate Model A Thd. B Thd. C E F G H J M-- / BSP.F M.... M-X- / BSP.F M. M-Y- / BSP.F M.... ia. x Thru.. ia. Spotface Places J
5 Metered Flow Vs Metered Flow Vs. Viscosity For any other Viscosity, multiply by the factors in the table below. Viscosity cst Factor For any other specific gravity, use the formula : P'= P Where P is each value in the chart above, and G is. specific gravity. - Viscosity Viscosity Viscosity mm²/s mm²/s mm²/s
6 Metered Flow Vs. ial Position Minimum required Pressure ifference Pressure ial Position ial Position -- - ial Position ial Position
7 Pressure rop for Reversed Free Flow Pressure rop P Throttle Closed (--) Free Flow (--) Pressure rop P Throttle Closed Free Flow -- - Pressure rop P Throttle Closed Free Flow
Max. Reversed Free Flow L/min
These Valves are the combination of flow control valve, a deceleration valve and a check valve and used mainly for controlling rapid traverse and feed cycle in machine tools. Switching from rapid traverse
Flow Control Valves / Flow Control and Check Valves
LOW CONTROLS These valves are pressure and temperature compensating type valves and maintain a constant flow rate independent of change in system pressure (load) and temperature (viscosity of the fluid).
Restrictors / One Way Restrictors
FLOW CONTROLS This valve is used to regulate an actuator speed in a circuit where line pressure is almost steady and small fluctuation of oil flow due to pressure changes is permitted. Integrated check
FLOW CONTROLS. Maximum Flow U.S.GPM Maximum Operating Pressure MPa (PSI) Graphic Symbols. Page. Valve Type.
FLOW CONTROLS Valve Type Graphic Symbols Maximum Operating Pressure MPa (PSI) Maximum Flow U.S.GPM 5 5 5 5 5 5 5 Page Flow Control Valves (5) 77 Flow Control and Check Valves (5) 77 Pilot Operated Flow
Pilot Operated Flow Control Valves / Pilot Operated Flow Control and Check Valves
FLOW CONTROLS Flow control of these valves is continuously made by a hydraulically operated pilot piston mechanism which controls opening area of the orifice of the valve. With the use of these valves,
Throttle Modules / Throttle and Check Modules
FLOW CONTROLS Used as pilot choke valves for solenoid controlled pilot operated directional valves and pilot operated directional valves. Graphic Symbols Valve Size 3 Standard Type P AB T TCG- P A B T
Proportional Electro-Hydraulic Relieving and Reducing Valves
These valves consist of a small size but high performance EH series electro-hydraulic proportional pilot relief valve and reducing valve with relief function. The valves control the system pressure proportionally
Max. Reversed Free Flow. Max. Operating. Pressure MPa (PSI) Fine Feed 20 (5.3) 14 (2030) 40 (10.6) ( ) 40 (10.6) (
These valves are the combination of flow control valve, a deceleration valve and a check valve and used mainly for controlling rapid traverse and feed cycles machine tools. Switching from rapid traverse
Pressure Reducing and Relieving Valves
reducing and relieving valves are composite pressure control valves having pressure reducing and counterbalancing functions developed for hydraulic balancing circuits. Specifications RBG-- * - * RBG-6-
Max. Operating Pressure Kgf/cm 2
In-Line Check Valves DIRCTIONAL CONTROLS These valves allow free flow in one direction and prevent flow in the reverse direction. Cracking pressure specified is the pressure required to open the valve
E SERIES. Proportional Electro-Hydraulic Relief Valves. Specification. Model Number Designation. Attachment Mounting Bolts
ydraulic Relief s The electro hydraulic relief valve is designed for compactness and high efficiency. The valve provides fast proportional response to the input current. For linear pressure control a special
Proportional Electro-Hydraulic Flow Control (and Check) Valves
Proportional Electro-Hydraulic Flow Control (and Check) Valves EH SERIES The system flow rate can be controlled remotely as desired by regulating input voltage. Further, since pressure and temperature
Proportional Electro-Hydraulic Directional and Flow Control Valves
Proportional Electro-Hydraulic s These valves are double-deck directional and flow control valves employing as their pilot the electro-hydraulic proportional pressure reducing valves with two proportional
EMulti Purpose Control Valves
IRCTIONAL CONTROLS The Yuken Multi-Purpose Valves Comply with The Needs of Reducing Cost and Size of Your Machine YUKN's Multi Purpose Valve s are compound valves composed of the main valve having four
EHBG-03 EHBG-06 EHBG-10. Refer to Model No. Designation. 2% or Less(1%) 1% or Less *2. Refer to frequency Response on page V DC
Proportional Electro-ydraulic These valves, consist of a small size but high performance E series electro-hydraulic proportional pilot relief valve and a low noise type relief valve. The valves control
PRESSURE REDUCING AND RELIEVING VALVES
REDUING AND RELIEVING VALVES RBG-3 / 6 (3/8, 3/4) Mounting Specifications / Model Number Designation / Others Up to 25 (363 ), 25 (33 U.S.GPM) reducing and relieving valves are composite pressure control
PRESSURE REDUCING AND RELIEVING VALVES
REDUING AND RELIEVING VALVES RBG-3 / 6 (3/8, 3/4) Mounting Specifications / Model Number Designation / Others Up to 5 (363 ), (33 U.S.GPM) reducing and relieving valves are composite pressure control valves
High Pressure, High Flow Rate Modular Valves
High Pressure, High Modular Valves EIC-F-14- MODULR VLVES The modular valves are functional elements with which a hydraulic system can be composed and built easily by stacking them with the mounting bolts.
AR Series Variable Displacement Piston Pumps. [Comparison of AR16 with A16 ] A16,32 Design 188. AR16,22 Design 130. Ratio of Mass (AR16/A16) 74%
![AR Series Variable Displacement Piston Pumps. [Comparison of AR16 with A16 ] A16,32 Design 188. AR16,22 Design 130. Ratio of Mass (AR16/A16) 74%](/thumbs/89/97534102.jpg "AR Series Variable Displacement Piston Pumps. [Comparison of AR16 with A16 ] A16,32 Design 188. AR16,22 Design 130. Ratio of Mass (AR16/A16) 74%")
PISTON PUMPS EIC--11- Features Smaller in Size and Lighter in Mass s indicated in the dimensional comparison presented below, the R1 is smaller than the 1(3 design). lso, the mass of R1 is substantially
Series Proportional Electro-Hydraulic Controls
Proportional Electro-ydraulic Controls Types Graphic Symbols Max. Operating Pressure () Maximum Flow U.S.GPM. 3 3 3 L/min Page Pilot Relief Valves. (3) EDG 67 Relief Valves. (3) EBG 3 6 676 Relieving and
Hydraulic Fluids. Note: For use with hydraulic fluids other than those listed above, please consult your Yuken representatives in advance.
Hydraulic Fluids Fluid Types Any type of hydraulic fluids listed in the table below can be used. Petroleum base oils Use fluids equivalent to ISO VG 32 or VG 46. Use phosphate ester or polyol ester fluid.
E SERIES. Proportional Electro-Hydraulic Relief Valves. Specification. Model Number Designation. Attachment Mounting Bolts
s The electro hydraulic relief valve is designed for compactness and high efficiency. The valve provides fast proportional response to the input current. For linear pressure control a special venting feature
UNLOADING RELIEF VALVES
UNLOADING RELIEF VALVES BUG-6/1 (3/4, 1-1/4) Specifications / Model Number Designation Up to 21 (35 ), L /min (66 ) Pub. E- These valves are used to operate the pumps with minimum load in accumulator circuits
Vent Connection. Pres. Adj. Range BT BG * ~ BG F- B T -03 P -V -32.
These valves protect the hydraulic system from excessive pressure, and can e used to maintain constant pressure in a hydraulic system. Remote control and unloading are permitted y vent circuit. PRESSURE
High Pressure, High Flow Rate Modular Valves
eatures Installation and mounting space can be minimized. No special skill is required for assembly and any addition or alternation of the hydraulic circuit can be made quickly and easily. roblems such
Proportional Electro-Hydraulic Flow Control and Relief Valves
Ω Ω Proportional Electro-ydraulic Flow ontrol and Relief Valves This flow control and relief valve is an energy-saving valve that supplies the minimum pressure and flow necessary for actuator drive. Since
Modular Valves. Ratings
High Pressure, High Flow Rate Features Installation and mounting space can be minimized. No special skill is required for assembly and any addition or alternation of the hydraulic circuit can be made quickly
Proportional Electro-Hydraulic Pilot Relief Valves
Proportional Electro-Hydraulic This valve consists of a small DC solenoid and a direct-acting relief valve. It serves as a pilot valve for a low flow rate hydraulic system or a proportional electro-hydraulic
" " Series Variable Displacement Piston Pumps
" " Series Variable Displacement Piston Pumps Compensator Type Constant Power (Torque) Control Type Load Sensing Type Pump Type Graphic Symbol Geometric Displacement cu. in./rev...5 5 5 5 5 cm /rev Maximum
PISTON PUMPS. A3H Series High Pressure Variable Displacement Piston Pumps. Features. A3H Series Variable Displacement Piston Pumps.
3H Series High Variable EIC--13- Features 1 Control System for Wide Range pplication: 1 Compensator Type 3H Series High Variable 9 Constant Power Control Type 1 Load Sensing Type For these controls system,
Proportional Electro-Hydraulic Flow Control (and Check) Valves
Ω Proportional Electro-ydraulic Flow Control (and Check) Valves Since the preselected flow rate continuously varies in proportion to the current input to the valve, the system flow rate can be remotecontrolled
Poppet Type Directional Valves
IRCTIONAL CONTROLS Poppet Type irectional Valves Valve Type Graphic Symbols Max. Operating Pressure MPa (PSI) Maximum Flow U. S. GPM.5 5 5 5 5 5 L/min Page Poppet Type Solenoid Operated irectional Valves
PROPORTIONAL ELECTRO-HYDRAULIC CONTROLS
H PROPORTIONAL ELECTRO-HYDRAULIC CONTROLS Hydraulic Controls H-3 H-1 E Series Hydraulic Controls Hydraulic Controls Max. Maximum Flow Types KS Graphic Symbols Operating L/min 1 2 3 5 10 20 30 50 100 200
Direct Operated Type Directional and Flow Control Valves
Specifications igh Response Type Proportional Electro-ydraulic Directional and Flow Control Valves igh response, high precision and high reliability are achieved be a combination of a compact and powerful
06 SERIES MODULAR VALVES. Pub. EC-1404
6 SERIES General Information Mounting Surface : ISO -AE-8--A, CETOP-8, NPA-D6 Up to 5 MPa (363 PSI), 5 L /m in (3 U.S.GPM) Pub. EC- The modular valves are functional elements with which a hydraulic system
"AR" SERIES PISTON PUMPS. Variable Displacement-Single Pumps Pressure Compensator Type,AR16 / AR22-FR01
"AR" SERIES Variable Displacement-Single Pumps Compensator Type, / AR-FR1 Up to 1 MPa ( PSI),. cm /rev ( CU.IN./rev) Pub. EC- A Compensator Valve Adj. Screw Spool Control Piston Drain Port Flow Adj. Screw
AR Series Variable Displacement Piston Pumps. AR Series Variable Displacement Piston Pumps. AR Series Variable Displacement Piston Pumps
Variable Displacement Piston Pumps AR Series Variable Displacement Piston Pumps Geometric Displacement Maximum cm 3 /rev Operating Pump Type Graphic Symbol Pressure Page 1 2 5 10 20 50 100 150 MPa Variable
"AR" SERIES PISTON PUMPS. Variable Displacement-Single Pumps Pressure Compensator Type,AR16 / AR22- FR01 3
"AR" SERIES Variable Displacement-Single Pumps Compensator Type,AR / AR- FR Up to MPa ( PSI),. cm /rev (.5 CU.IN./rev) Pub. EC- A Compensator Valve Adj. Screw Spool Control Piston Drain Port Flow Adj.
10 SERIES MODULAR VALVES. Pub. EC-1405
SERIES General Information Mounting Surface : ISO ----, CETOP-, NP-D Up to 5 MPa (363 PSI), 8 L /m in ( U.S.GPM) Pub. EC-5 The modular valves are functional elements with which a hydraulic system can be
"A" Series Variable Displacement Piston Pumps Single Pump, Pressure Compensator Type
A"A" Series PISTON PUMPS Single Pump, Compensator Graphic Symbol M O Specifications Model s A-FRB- A-FRC/H- A- -R-- - -K- A- -R-- - -K- A- -R-- - -K- A- -R-- - -K- A- R S- A9- R S- A- R S- Geometric Displacement
" " Series Variable Displacement Piston Pumps
" " Series Variable Displacement Piston Pumps AR Axial Port Type AR Side Port Type "AR" series variable displacement pump has been developed which the aim of even further the quientness in operation, smaller
EMechanically Operated Directional Valves
E DIRECIONL CONROLS Cam Operated Directional Valves hese valves may be used to shift the direction of oil flow by depressing the spool by way of a cam. Specifications Max. Operating Max. -Line Max. Flow
03 SERIES. General Information Mounting Surface : ISO 4401-AC-05-4-A, CETOP-5, NFPA-DO2 Up to 25 MPa (3630 PSI), 70 L /min (18.5 U.S.
3 SERIES General Information Mounting Surface : ISO 44-C--4-, CETO-, N-DO Up to Ma (363 SI), 7 L /min (8. U.S.GM) ub. EC-43 MODULR VLVES The modular valves are functional elements with which a hydraulic
EManually Operated Directional Valves
DIRECIONL CONROLS hese valves may be used to manually shift the spool position and change the direction of oil flow. hreaded Connections Sub-late Mounting Specifications DM--C - DM--D - DM--D - DM-- -
SHUT-OFF TYPE SOLENOID OPERATED DIRECTIONAL VALVES DSPC/DSPG-01/03(1/8,
SHUT-OFF TYP SOLNOID OPRATD VALVS DSPC/DSPG-/(/8, /8) Cartridge Type / Mounting Up to 5 MPa (6 PSI), 8 (. U.S.GPM) Pub. C- The shut-off type solenoid operated directional valves are poppet type solenoid
PROPORTIONAL ELECTRO-HYDRAULIC CONTROLS
H PROPORTIONAL ELECTRO-HYDRAULIC CONTROLS Hydraulic Controls H-3 H-1 E Series Hydraulic Controls Hydraulic Controls Max. Maximum Flow Types KS Graphic Symbols Operating L/min 1 2 3 5 10 20 30 50 100 200
PROPORTIONAL ELECTRO-HYDRAULIC CONTOROLS
H PROPORTIONAL ELECTRO-HYDRAULIC CONTOROLS -Hybrid Components...Page Proportional Electro-Hydraulic Control Valves...Page 7 Proportional Electro-Hydraulic Controls High-accuracy, simple, convenient realizes
These valves may be used to manually shift the spool position and change the direction of oil flow *2 1.8
DIRCINL CNRLS Manually perated Directional s hese valves may be used to manually shift the spool position and change the direction of oil flow. IC--1005-0 Specifications Numbers DMG-01-C -10 DMG-01-D -10
Type C2 Seat Type Solenoid Pilot Valve
Type C Seat Type Solenoid Pilot Valve JIS graphic symbols for hydraulic system T eatures No hydraulic locking occurs even during long periods of pressurized operation Nomenclature 1 3 5 - - - - - 1 3 5
EManually Operated Directional Valves
DIRECIONL CONROLS hese valves may be used to manually shift the spool position and change the direction of oil flow. hreaded Connections Sub-late Mounting Specifications DM--C - DM--D - DM--D - DM--B -
A Series Variable Displacement Piston Pumps. A16 Type performance characteristics A16 Type Noise level characteristics.
EIC--12- PISTON PUMPS Series Variable Features High efficiency Under the conditions of pressure 16 Kgf/cm² and speed 18 r/min. volumetric efficiency is over 98% and the overall efficiency is over 9%. Low
EH SERIES PROPORTIONAL ELECTRO-HYDRAULIC CONTROL VALVES
Pub. EC- E SERIES ELECTRO-YDRAULIC CONTROL VALVES Pilot Relief / Relief / Reducing and Relieving / Flow Control / Flow Control and Relief / Directional and Flow Control Up to. ( PSI), L/min (6 U.S.GPM)
10 SERIES MODULAR VALVES
General Information Mounting Surface : ISO 441-A-1-4-A, CETOP-1, NPA-D1 Up to 5 MPa (363 PSI), 8 L /min (11 U.S.GPM) Pub. EC-145 The modular valves are functional elements with which a hydraulic system
Pressure Compensated Flow Control Valve
Pressure Compensated Flow Control Valve Screw Type Knob Type Solenoid Type Solenoid & Modular Type Temperature and Pressure Compensated Flow Control Valve www.steedmachinery.com.tw Contents Pressure Compensated
ISD SO-NB-G105 SO-NB-G85 SO-NB-P46 PV2R1-* - * -RAA-42/4290 PV2R2-* - * -RAA-41/4190 PV2R3-* - * -RAA-31/3190 PV2R4-* - * -RAA-30/3090
Spare Parts List PVR-* - * -RAA-4/4 PVR-* - * -RAA-4/4 PVR-* - * -RAA-/ PVR4-* - * -RAA-/ 4 5 4 6 8 8 6 5 4 Y Section Y-Y Y 6 5 Section - 8 Cartridge Kits Model Numbers PVR-6- * -RAA-4 * PVR-8- * -RAA-4
Pilot Operated Check Valves
Pilot Operated heck Valves Nomenclature IS graphic symbols for hydraulic system L eatures - P - - - - pplicable fluid code No designation: Petroleum-based hydraulic fluid, waterglycol hydraulic fluid :
Max. Operating Pressure Kgf/cm 2. F- YB T -01 -F Max. Operating Design Pressure Kgf/cm 2 Number. Panel. Mounting
Remote ontrol Relief Valves his valve is used as a remote control valve for pilot operated type pressure control valves. EI--1-0 Graphic Symbol Specifications hreaded onnection Designation F- YB -01 -F
A Series Variable Displacement Piston Pumps
A Series Variable Displacement Piston Pumps A37 A56 A1637 A16 A10 A Series Variable Displacement Piston Pumps Pump Type Graphic Symbol Geometric Displacement cm 3 /rev 1 5 10 0 50 100 00 300 Maximum Operating
Flow Control Modular Valve (Pressure and temperature compensated)
v FLOW CONROL MOULR VLVE Flow Control (ressure and temperature compensated) Features to l/min,,ma C qhis modular valve is used to control actuator speed and for other flow control valve applications. w
DIRECTIONAL CONTROLS. Pilot Operated Directional Valves. Specifications
ilot Operated Directional s DIRECIONL CONROLS hese valves perform a change over of spool by hydraulic pilot and shift the direction of oil flow. EIC-E-04-0 Specifications Model Numbers Maximum Flow L/min.
50T,150T,250F SERIES Fixed Displacement-Single, Double, Combination
T,T,F SERIES Fixed Displacement-Single, Double, Combination Up to 7 MPa ( PSI), 9 cm /rev (. CU.IN./rev) Single Pumps These pumps are widely used as a source of hydraulic power. They combine stable performance
Reducing Valve/Reducing Valve with Check Valve
Reducing Valve/Reducing Valve with Check Valve Nomenclature JIS graphic symbols for hydraulic system JGB JGBC Features - JGB - - - Applicable fluid code No designation: Petroleum-based hydraulic fluid,
High Response Type Proportional Electro-Hydraulic Directional and Flow Control Valves
igh Response ype roportional Electro-ydraulic s igh response, high precision and high reliability are achieved by a combination of compact and powerful solenoid and spool-position-detection LVD. Direct
Solenoid Controlled Relief Valves
hese valves are a comination of a pilot operated relief valve and a solenoid operated directional valve. Piping etween the two is eliminated as the solenoid valve is directly mounted on the relief valve
01 SERIES MODULAR VALVES. Pub. EC-1402
SERIES General Information Mounting Surface : ISO --3--, CEO-3, N-D Up to 3.5 Ma (57 SI), 35 L /m in (9.5 U.S.GM) ub. EC- MODULR VLVES he modular valves are functional elements with which a hydraulic system
V* THRU DRIVE SINGLE VANE PUMPS ORDERING CODE
V* ORDERING CODE 1 - "F3" means special seals for fire-resistant fluids. Omit if not required 2 - Pump Type: F3 VS 7T C 60 D 86 A A 1 2 3 4 5 6 7 8 9 VS = 12 vane pump, industrial use (very quiet), UNC
"G" SERIES SHOCKLESS TYPE SOLENOID OPERATED DIRECTIONAL VALVES G-DSG-01/03 (1/8, 3/8) "G" SERIES SHOCKLESS TYPE
"G" SRIS SHOCKLSS Y NOID ORD DIRCIL VLVS G-DSG-1/3 (1/, 3/) "G" SRIS SHOCKLSS Y NOID CROLLD ILO ORD DIRCIL VLVS G-DSHG-/ (1/, 3/) Mounting Up to 5 Ma (33 SI), 5 L /m in (.1 U.S.GM) ub. C-5 DIRCIL CROLS
FLOW CONTROL VALVES F CONTROL VALVES. Maximum operating pressure MPa {kgf/cm 2 } Model [Model No.] Maximum flow rate L/min. Page
![FLOW CONTROL VALVES F CONTROL VALVES. Maximum operating pressure MPa {kgf/cm 2 } Model [Model No.] Maximum flow rate L/min. Page](/thumbs/96/128760697.jpg "FLOW CONTROL VALVES F CONTROL VALVES. Maximum operating pressure MPa {kgf/cm 2 } Model [Model No.] Maximum flow rate L/min. Page")
F FLOW CONTROL VALVES F FLOW CONTROL VALVES Model [Model No.] Maximum operating pressure MPa {f/cm } Maximum flow rate 5 5 5 Page Flow control valve [SF] 7 {7} F- Flow control valve Flow control valve
Pressure Control Valves
efore using the product, please check the Pressure ontrol Valves JIS graphic symbols for hydraulic system Refer to the next page. Features These direct operated control valves can be used as sequence valves,
Manual Proportional Directional Control Valve (with Pressure Compensation, Multiple Valve Series)
Manual Proportional Directional Control Valve (with Pressure Compensation, Multiple Valve Series) Hydraulic circuit (Example) AB AB AB X Z P Features hese stacking type multiple control valves are equipped
Pressure Relief Valves
VICKERS Pressure Relief Valves Unloading Relief Valves EURG1/2-06/10, 13 Design and EURT1/2-06/10, 12 Design Sectional Illustrations EURG* EURT* Basic Characteristics Mounting... Pipe or subplate mounting
50T,150T,250F SERIES Fixed Displacement-Single, Double, Combination 3
T,T,F SERIES Fixed Displacement-Single, Double, Combination Up to 7 MPa ( PSI), 9 cm /rev (. CU.IN./rev) Single Pumps These pumps are widely used as a source of hydraulic power. They combine stable performance
04 Series Modular Valves Release of New Series
NO. 11 05E September 5, 2011 Public Relations Group Products Publicity Section Sales Administration Department Hamamatsucho Seiwa Bdg., 4-8, Shibadaimon 1-chome, Minato-ku, Tokyo 105-0012, Japan Tel: +81-3-3432-2113
Vickers. Proportional Valves. EPV10 Series. Proportional Flow Controls. Released 6/95
Vickers Proportional Valves EPV1 Series Proportional Flow Controls Released 6/95 715 Table of Contents Features and Benefits..............................................................................
PROPORTIONAL VALVES SERVO VALVES. Maximum operating pressure MPa {kgf/cm 2 } Model [Model No.]
![PROPORTIONAL VALVES SERVO VALVES. Maximum operating pressure MPa {kgf/cm 2 } Model [Model No.]](/thumbs/82/85298236.jpg "PROPORTIONAL VALVES SERVO VALVES. Maximum operating pressure MPa {kgf/cm 2 } Model [Model No.]")
J PROPORTIONAL VALVES SERVO VALVES J Model [Model No.] Solenoid pilot operated proportional relief valve [JRP] Solenoid operated proportional relief valve [JRPL] Type C2 solenoid operated proportional
Variable Displacement Piston Pumps
A3HG Series High Pressure Variable Displacement Piston Pumps A3HG71 A3HG1 A3HG Through Drive A3HG Series High Pressure Variable Displacement Piston Pumps Pump Type Graphic Symbol Geometric Displacement
IGP /117 ED INTERNAL GEAR PUMPS SERIES 10 OPERATING PRINCIPLE TECHNICAL SPECIFICATIONS HYDRAULIC SYMBOL
00/7 ED IGP INTERNAL GEAR PUMPS OPERATING PRINCIPLE IGP pumps are volumetric displacement pumps with internal gears, available in five sizes, each divided into a range of different displacement. The pumps
VANE PUMPS. Output Flow at 1200 r/min at No-Load U.S.GPM Maximum Operating Pressure MPa (PSI) Graphic Symbols.
B VANE PUMPS Pump Type "PVR" Series Single Pumps Graphic Symbols at r/min at No-Load.. PVR PVR PVR PVR Maximum Operating MPa (PSI) () Page Fixed Displacedment "PVRA" Series Single Pumps "PVR" Series Double
OBE (On-Board Electronics) Type Direct Operated Linear Servo Valves (Size: 01 & 03) LSVG-01-EH-*-**-**-10, LSVG-03EH-*-**-**-10/1006
NO. 10 01E September 1, 2010 Public Relations Group Products Publicity Section Sales Administration Department Hamamatsucho Seiwa Bdg., 4-8, Shibadaimon 1-chome, Minato-ku, Tokyo 105-0012, Japan Tel: +81-3-3432-2113
Series Variable Displacement Piston Pump
AH Series Variable Displacement Piston Pump AH AH7 AH AH45 KS Geometric Displacement Max. Operating Series Graphic cm 3 /rev Pres. Page Symbol 3 4 5 6 7 8 9 3 4 5 MPa {kgf/cm 2 } AH-F-R--K-S- AH AH45-F-R--K-S-
VARIABLE DISPLACEMENT PISTON PUMPS
VRIBLE DISPLCEMENT Pump Type "R" Series Variable Displacement Piston Pumps Maximum Operating MPa (PSI) () Geometric Displacement cu. in./rev... cm /rev R R Catalogue No. Pub. EC- "" Series Variable Displacement
4.2 FIXED DISPLACEMENT DOUBLE PUMP
4.2 FIXED DISPLACEMENT DOUBLE PUMP CONTENTS PVF101 Ordering Code 4.2.1 Fixed Displacement Technical Information 4.2.2 Specifications 4.2.3 Hydraulic fluids 4.2.4 Viscosity range 4.2.5 Temperature range
RELIEF VALVES Remote Control / Direct Type Pilot Operated / Solenoid Controlled
RELIEF VALVES Remote ontrol / Direct ype ilot Operated / Solenoid ontrolled Up to 5 Ma (3630 SI), 0 L /m in (06 U.S.GM) ub. E-00 Remote ontrol Relief Valves... age 3 his valve is used as a remote control
USA Headquarters. Dynex/Rivett Inc. 770 Capitol Drive Pewaukee, WI U.S.A. Tel: FAX:
SPECIFICATIONS Pressure Compensated Checkball Piston Pumps Also refer to "Checkball Pump Installation and Operating Recommendations" Bulletin PSI.CB (dynexpumpinstallation.pdf) CONTACT INFORMATION USA
ARL1 Series Piston Pumps. ARL1 Series Piston Pumps. Geometric Displacement. Maximum cm 3 /rev
ARL1 Series Piston Pumps Geometric Displacement Maximum cm 3 /rev Operating Pump Type Graphic Symbol Pressure Page 1 2 5 10 20 50 100 150 MPa ARL1-6 Piston Pump ARL1-8 ARL1-12 7 8 ARL1-16 5 Hydraulic Fluids
Series Shockless Type Solenoid Controlled Pilot Operated Directional Valves
Solenoid Controlled ilot Operated Directional Valves Electronic Circuit X Specifications Descriptions G-DSHG-4-3C - - - -/9 G-DSHG-6-3C - - - -/9 Max. Flow /min (U.S.GM) 16 (4.3) (66.1) 1 1 Max. Operating
Vickers. Piston Motors. Inline Piston Motors. Fixed and Variable Displacement. Revised 5/99 691
Vickers Piston Motors Inline Piston Motors Fixed and Variable Displacement Revised 5/99 691 Table of Contents Introduction........................................................................................
Hydraulic cylinders are devices which convert fluids power into mechanical force or motion. This force or motion will be in a straight line.
HYDRAUIC CYINDERS Hydraulic Cylinders Hydraulic cylinders are devices which convert fluids power into mechanical force or motion. This force or motion will be in a straight line. EIC-J-1-0 Graphic Symbol
Kawasaki Motors Corp., U.S.A. Precision Machinery Division. Staffa Fixed Displacement Hydraulic Motor
Kawasaki Motors Corp., U.S.A. Precision Machinery Division HM(HD)B 270 Staffa Fixed Displacement Hydraulic Motor CONTENTS Page 1. General Description... 2 2. Functional Symbols... 2 3. Model Code... 3
"A" Series Piston Pumps Variable Displacement-Single Pumps Electro-Hydraulic Proportional Pressure & Flow Control. Type
Variable Displacement-Single Pumps Electro-Hydraulic Proportional & Flow Type 6 / / 7 / 6 / 7 / 9 / Model Number Designation Safety valve Input Signal for Flow Input Signal for mplifier Proportional Solenoid
Kawasaki Motors Corp., U.S.A. Precision Machinery Division HMB 325. Staffa Fixed Displacement Hydraulic Motor
Kawasaki Motors Corp., U.S.A. Precision Machinery Division HMB 325 Staffa Fixed Displacement Hydraulic Motor CONTENTS Page 1. General Description... 2 2. Functional Symbols... 2 3. Model Code... 3 4. Performance
PVD /117 ED VARIABLE DISPLACEMENT VANE PUMPS WITH DIRECT PRESSURE ADJUSTER OPERATING PRINCIPLE
14 100/117 ED PVD VARIABLE DISPLACEMENT VANE PUMPS WITH DIRECT PRESSURE ADJUSTER OPERATING PRINCIPLE The PVD pumps are variable displacement vane pumps with mechanical pressure compensator. The pressure
RS* /110 ED DOUBLE-ACTING THROTTLE FLOW CONTROL VALVE SERIES 30. Q max (see table of performances) THREADED PORTS CARTRIDGE TYPE
31 200/110 ED RS* DOUBLE-ACTING THROTTLE FLOW CONTROL VALVE SERIES 30 THREADED PORTS CARTRIDGE TYPE p max (see table of performances) Q max (see table of performances) OPERATING PRINCIPLE The RS* and RS*-I
Kawasaki Motors Corp., U.S.A. Precision Machinery Division HMC 045. Staffa Fixed Displacement Hydraulic Motor
Kawasaki Motors Corp., U.S.A. Precision Machinery Division HMC 045 Staffa Fixed Displacement Hydraulic Motor CONTENTS Page 1. General Description... 2 2. Functional Symbols... 2 3. Model Code... 3 4. Performance
"PV11R" SERIES Fixed Displacement- Single PV11R10/PV11R20
"PVR" SERIES Fixed Displacement- Single PVR/PVR Up to MPa ( ),. cm /rev (. CU.IN./rev) Pub. EC- These pumps are of completely unique design for extra high pressure applications. The excessive wear to the
RV1P /118 ED VARIABLE DISPLACEMENT VANE PUMPS SERIES 10 OPERATING PRINCIPLE TECHNICAL SPECIFICATIONS HYDRAULIC SYMBOL
14 201/118 ED RV1P VARIABLE DISPLACEMENT VANE PUMPS OPERATING PRINCIPLE TECHNICAL SPECIFICATIONS (measured with mineral oil with viscosity of 46 cst at 40 C) RV1P are variable displacement vane pumps with
Proportional Valves. Proportional solenoid valves for pressure and flow control B-1.A. An Eaton Brand
Proportional Valves Proportional solenoid valves for pressure and flow control An Eaton rand -.A Proportional Valves Valve Locator/Section Contents Note: Proportional valve solenoid coils and electronic
Proportional Valves. Proportional solenoid valves for pressure and flow control
Proportional Valves Proportional solenoid valves for pressure and flow control EATON Vickers Screw-In Cartridge Valves V-VLOV-MC-E4 September, 7 - Electro- Proportional Valves Section Contents Typical
EEiGl BOSCH. Engineering Data VARIABLE VOLUME VANE PUMPS MODEL SV-80 MODEL SV-100 QUICK REFERENCE FLANGE MOUNTED SYMBOL
@ BOSCH Engineering Data VARIABLE VOLUME VANE PUMPS MODEL SV-80 MODEL SV-100 FLANGE MOUNTED @ JI SYMBOL QUICK REFERENCE CHART SV-80 SV-100 MAXIMUM PRESSURE THEORETICAL INPUT HP MAXIMUM PRESSURE COMPENSATING
Kawasaki Motors Corp., U.S.A. Precision Machinery Division HMB 100. Staffa Fixed Displacement Hydraulic Motor
Kawasaki Motors Corp., U.S.A. Precision Machinery Division HMB 100 Staffa Fixed Displacement Hydraulic Motor CONTENTS Page 1. General Description... 2 2. Functional Symbols... 2 3. Model Code... 3 4. Performance