DATA PD BR43.. Load Sensing Valve - mechanically controlled. Product. Function. Technical Features. Range Overview
|
|
- Daniella Franklin
- 5 years ago
- Views:
Transcription
1 Commercial Vehicle Systems Product DATA BR.. Doc. No. Y0 (EN - Rev. 00) May 0 PD Function The Load Sensing Valve is used to adjust the applied service brake pressure in relation to the load imposed on the vehicle s axles. The mechanical suspension Load Sensing Valve uses the movement between the vehicle s chassis and axle to sense the load imposed on the axles. The valve is installed on the chassis and a linkage is required to connect the control arm of the valve to the axles. Any movement of the chassis changes the position of the valve s control arm which, in turn, alters the ratio of input pressure to output pressure. BR Versions of the Load Sensing Valve are available with standard relay or relay emergency feature and with static or dynamic operation. The relay emergency feature provides automatic braking on a trailer in the event of a breakaway. A static valve uses the braking ratio at commencement of braking throughout the brake application. A dynamic valve adjusts the braking ratio throughout the brake application to counteract the effect of axle load change due to load transfer. To adjust the rate of change of control ratio due to change in axle load, the effective length of the lever can be adjusted. A vehicle data plate showing the setting of the Load Sensing Valve is required by law. Technical Features Maximum Operating Pressure:. bar Operating Temperature Range: -0 C to +0 C Working Angle: 0 Weight:. kg approx. Range Overview Part No. Type No. Operation Type Relay Emergency Valve Relay Function K0790 ) BR dynamic with with SEB009 BR70 static without without Part No. Type No. Port Threads Remark with rigid link with cable link - K0790 ) BR Mx. Mx. Mx. (x) Mx. (x) - Mx. SEB009 BR70 Mx. - Mx. (x) - - Other versions are available. Maximum adjustable lever length: 00 mm. ) The part number will carry a suffix N00 which defines that it is supplied without packaging. BR BR70 BR70 Standard Symbol as DIN ISO 9 - BR BR 70 Service Parts: Lever with Rubber Links for BR: SEB00 Lever with Cable Link for BR70: SEB0 Accessories: Tandem Axle Linkage K00 ) Knorr-Bremse Systeme für Nutzfahrzeuge GmbH. Moosacher Straße Munich. Germany. Tel: Fax:
2 PD BR.. Product Data Doc. No. Y0 (EN - Rev. 00) May 0 Functional Diagrams Control ratio / / max. a=0 a=0 7 Delivery Pressure vs Angle p = 7. bar (BR) p = 7. bar (BR70) 7 Automatic braking (only BR) A = Pressure in the Supply Line [bar] = Pressure in the Brake Actuators [bar] = Signal pressure p (BR), p (BR70) [bar] = Delivery pressure p [bar] = Lever deflection α [º] = Delivery pressure p [bar] A = Initial charging 0 7 Knorr-Bremse Systeme für Nutzfahrzeuge GmbH. Moosacher Straße Munich. Germany. Tel: Fax:
3 Commercial Vehicle Systems Doc. No. Y0 (EN - Rev. 00) May 0 BR.. PD Dimensions BR - K0790. Limitation STOP 0 9 Mx. 7. Overtravel 0 + M.. - Mx. Mx Mx. - Mx M M Working angle 0 0 STOP 7 ) ) Ø Ports: = Supply (from Red Trailer Coupling) - = Trailer Service Brake Reservoir = Delivery (to Brake Actuator) = Exhaust = Signal (from Yellow Trailer Coupling) ) Tightening torque 0± Nm. M = Required adjusting torque: Nm M = Permissible adjusting torque: 0 Nm ) maximum Mounting Plate Dimension Knorr-Bremse Systeme für Nutzfahrzeuge GmbH. Moosacher Straße Munich. Germany. Tel: Fax:
4 0 PD BR.. Product Data Doc. No. Y0 (EN - Rev. 00) May 0 BR70 - SEB009 R0 STOP 0 Mx. 7 M Overtravel 0. Working angle ) STOP 7 ) x Mx. M M a+ a- a=0 M0 00 max. 00 Tightening torque 0 Nm 7 ) Ports: = Signal (from Foot Valve on trucks and tractors) (from yellow Trailer Coupling on trailers) = Delivery to Brake Actuators = Exhaust M = Required adjusting torque: Nm M = Permissible adjusting torque: 0 Nm Tightening torque Nm ) maximum Mounting Plate Dimension Load Sensing Valve Data Plate Vorderachse, Front Axle, Essieu avant Feder-Nr Spring No Ressort No Ventile Nr Valves No Valves No KNORR- BREMSE AG l S Achslast Axle Load Charge essieu kg l= mm Ausgangsdruck Output Pressure Pression de sortie bar Automatisch-Lastabhängige Bremskraftregeleinrichtung (ALB) für Typ: Load Sensing Device for Type: Dispositif de correction automatique de frainage pour type: Eingangsdruck Input Pressure Pression de entrée Weg s am Hebel Stroke s at Lever Course s ou Levier mm Hinterachse, Rear Axle, Essieu arrière Feder-Nr Spring No Ressort No Ventile Nr Valves No Valves No Achslast Axle Load Charge essieu kg bar Ausgangsdruck Output Pressure Pression de sortie bar l S l= Weg s am Hebel Stroke s at Lever Course s ou Levier mm mm DIN 77-C for mechanically controlled suspension, BR..: Part No.: EB09 Knorr-Bremse Systeme für Nutzfahrzeuge GmbH. Moosacher Straße Munich. Germany. Tel: Fax:
5 Commercial Vehicle Systems Doc. No. Y0 (EN - Rev. 00) May 0 BR.. PD Determining the Lever Length l - graphical method Lever Length Diagram for mechanical Control Load Sensing Valves: BR, BR Lever Length "l" [mm] Valve Ratio-determined from Brake calculation i ) Example: for an Axle Spring Deflection of 0 mm and a Valve Ratio of : the required Lever Length is mm Axle Spring Deflection "s" [mm] ) i = p - 0. p unladen - 0. Important Note: The graphical method should only be used when the ratio for the laden trailer is :. If the ratio for the laden trailer is not :, use the arithmetic method or contact your Knorr-Bremse representative for guidance. Knorr-Bremse Systeme für Nutzfahrzeuge GmbH. Moosacher Straße Munich. Germany. Tel: Fax:
6 PD BR.. Product Data Doc. No. Y0 (EN - Rev. 00) May 0 Determining the Lever Length l - arithmetic method Axle Spring Deflection: s [mm] = Foot Valve delivery pressure on trucks and tractors Control (Yellow) Line pressure on trailers - input: p [bar] = Load dependent brake actuator pressure - unladen: p unladen [bar] = Load dependent brake actuator pressure - laden: p laden [bar] = Valve Ratio (unladen): i L = p unladen - 0. = p - 0. Valve Ratio (laden): i V = p laden - 0. = p - 0. Secondary variable A [angle degree]: A =. x i L -. = Secondary variable B [angle degree]: B =. x i V -. = Secondary variable C: C = sin (A) - sin (B) = Lever Length l [mm]: l = Axle Spring Deflection s = Secondary variable C A computer calculation program is available on request. Knorr-Bremse Systeme für Nutzfahrzeuge GmbH. Moosacher Straße Munich. Germany. Tel: Fax:
7 Commercial Vehicle Systems Doc. No. Y0 (EN - Rev. 00) May 0 BR.. PD How to adjust a mechanically controlled Load Sensing Valve BR.. Determine the lever length with the help of the brake calculation, the nomogram and the formula. Fit the Cable attachment on the lever at this length. Write the following data on the Load Sensing Valve Data Plate: input pressure; output pressure of the Load Sensing Valve, unladen and laden, axle load, unladen and laden; lever length and spring deflection. With the lever of the Load Sensing Valve horizontal, the connecting link should be at right angles to it. The length of the link can be adjusted using the clamp screw. Ensure that the vehicle is on level ground and chock the wheels. Axle weight must be according to the data of the axle manufacturer for an unladen vehicle. Check that sufficient service pressure is available. Connect pressure gauges to the control input of the Load Sensing Valve and to the output (Brake Actuators). Apply input pressure as stated on the Data Plate. Read the output pressure on the gauge and correct if necessary (shorten the link to give lower unladen brake pressure and vice versa). See Attention note below. Disconnect the cable and with reference to a suitable measuring device, raise the lever a distance s, i.e. the distance of spring deflection as taken from the data plate. Apply input pressure as stated on the Data Plate. Read the output pressure and check it is the same as the Laden pressure as defined on the data plate. If it is not then correct by adjusting the lever length (shorten to increase output pressure and vice versa). Check and adjust until both unladen (with cable fitted) and laden settings are correct. See Attention note below. After finishing the test ensure that the lever and cable clamps are tightened securely. Attention: To adjust valve BR70 with static characteristic the supply pressure must be released to make any adjustment and then the output pressure re-checked. Knorr-Bremse Systeme für Nutzfahrzeuge GmbH. Moosacher Straße Munich. Germany. Tel: Fax:
8 PD BR.. Product Data Doc. No. Y0 (EN - Rev. 00) May 0 Rubber mounting for suspension equalisation Function Rubber mounts are used in mechanically suspended tandem bogies to get an elastic connection between the axles. The arrangement as shown below, averages the movements of both axles. Installation recommendation Use the tandem axle mounting kit K00 (see drawing) to connect the linkage of the Load Sensing Valve to the axles. Attach mounting brackets to the axles for the rubber mountings ( A and B ). The rubber mountings are connected to each other using a tube or angle section link D. Part C provides an attachment point on link D for the Load Sensing Valve linkage. L A L/ C 0 Øx D B 90 Axle M0 Ø Ø M0 Axle 70 K00* = A + B + C 0 0 A B C Note: Item D is not supplied by Knorr-Bremse and must be manufactured by the installer to the necessary dimensions. ) The part number will carry a suffix N00 which defines that it is supplied without packaging. For further information contact your Knorr-Bremse distributor. Servicing The Load Sensing Valves BR and BR70 are not serviceable. Revision Details Rev. 00 October 0 Correction - details of Port - added to diagrams, Part Nos. for data plate and tandem axle linkage kit updated Rev. 00 March 0 Important Note added to page. Rev. 00 May 0 Replaced valves removed. Text amended to cover use in more catalogues. Knorr-Bremse Systeme für Nutzfahrzeuge GmbH. Moosacher Straße Munich. Germany. Tel: Fax:
Weight Stroke TÜV-Inspection approx. [kg] II )4) BZ M16x Port threads:
Commercial Vehicle Systems Product DATA Spring Brakes (S-cam), diaphragm/piston Doc. No. Y1137 (EN - Rev. 5) September 216 PD-413-1 Function This range of Spring Brakes is used on axles fitted with drum
More informationDriving Position. Raise/Lower Position. Adaptor Plate* 19 min
Commercial Vehicle Systems Product DATA Raise/Lower Valves (single circuit) Doc. No. Y0377 (EN - Rev. 003) October 0 PD-501-050 Function Raise/Lower Valves are fitted on vehicles with air suspension and
More informationDATA PD AE1141 Lift Axle Valves - TEBS controlled. P r o d u c t
C o m m e r c i a l V e h i c l e S y s t e m s P r o d u c t DATA AE Doc. No. Y05067 (Rev. 00) August 0 PD-50-00 Function The TEBS controlled Lift Axle AE Valve is used for trailers with electronic braking
More informationDATA PD VB... Air Reservoirs. Product. Function. Technical Features. Range Overview - mounting straps for steel and aluminium reservoirs
Commercial Vehicle Systems Product DATA Doc. No. Y095687 (EN Rev. 004) February 16 PD50 Function are used to store the compressed air for the vehicle air braking, suspension and auxiliary systems. They
More informationDATA PD-214-F101. TEBS G2 Doc. No. Y (EN - Rev. 001) July Product. Lift Axle Control. Function. Operation
Commercial Vehicle Systems Product DATA Function Many trailers have one or more axles having the capability of being lifted so that they carry none of the trailer load. The function is present in the TEBS
More informationDATA PD SV13.., SV14.. Levelling Valves. Product. Function. Technical Features. Range Overview
Commercial Vehicle Systems Product DATA Doc. No. Y075 (EN - Rev. 00) PD-500-000 Function On vehicles fitted with air suspension, the Levelling Valve ensures that the axle suspension air bags maintain a
More informationDATA. icargo) Product. Application. Purpose. Function. Knorr-Bremse s intelligent axle loading system, icargo, is designed to work on:
Commercial Vehicle Systems Product DATA Doc. No. Y09 (EN - Rev. 00) January 0 Application Knorr-Bremse s intelligent axle loading system,, is designed to work on: Semi-trailers with two to five axles Centre-axle
More informationDATA PD-214-F104. TEBS G2 Doc. No. Y (EN - Rev. 001) May Product. icargo. Function. Operation
Commercial Vehicle Systems Product DATA Function On semi-trailers and centre-axle trailers, the axle/bogie will act as a pivot point that, depending on the positioning of the cargo carried by the trailer,
More informationWeight approx. [kg] II39908FA BZ Part No. Type No. Type Push Rod Seal TÜV Inspection Report
Commercial Vehicle Systems Product DATA PD-403-200 Function This range of Brake Chambers is used on axles fitted with drum brakes. The single diaphragm cylinder provides the service brake function. In
More informationDATA PD LS1..., LS2..., LS3... Lift Axle Valves - Pneumatic. P r o d u c t. Function. Technical Features
C o m m e r c i a l V e h i c l e S y s t e m s P r o d u c t DATA PD-503-200 Function Pneumatic Lift Axle Control Valves are used for the semi-automatic or fully automatic control of air suspended lift
More informationLift axle control on axle 1. Lift axle control on axle 3
Commercial Vehicle Systems Product DATA Function On vehicle combinations using semi-trailers it is often difficult to meet the turning corridor required by European Community (EC) legislation. When certain
More informationDATA PD BS7... Spring Brakes (Disc), diaphragm/diaphragm. Product. Function. Technical Features
Commercial Vehicle Systems Product DATA PD-415-200 Function This range of Spring Brakes is used on axles fitted with air disc brakes and provides the service and parking brake functions. The internal wind
More informationSystem and Installation Instructions for KB4TA-G2
Systems for Commercial Vehicles Product Manual System and Installation Instructions for KB4TA-G2 24 Volt Multi-Channel Trailer-ABS With integrated anti-compounding Disclaimer The information contained
More informationDATA PD AE431. Product. Park/Shunt Valves with Integrated Emergency Function. Function
Commercial Vehicle Systems Product DATA Park/Shunt Valves with Integrated Emergency Function PD-113-0 Function The Park/Shunt Valve is used on trailers that are equipped with spring brakes. It is connected
More informationHydraulic Fluid: Master Cylinder dia. [mm]
Commercial Vehicle Systems Product DATA Function This range of Brake Chambers with Master Cylinder is used to apply the service brakes on axles fitted with hydraulic brakes. The chamber applies force to
More information1. Semi- and centre-axle trailers To enable the automatic load sensing function to operate, it is necessary to define certain parameters as follows:
Commercial Vehicle Systems Product DATA Function Load Sensing Function (pneumatic suspension) PD-4-F00 The Load Sensing Function (LSF) of the TEBS Brake Module is used to replace the function of a load
More informationLevelling valve
Levelling valve 464 006 Application Purpose Maintenance Vehicles with conventionally controlled air-suspension. Control of a constant ride height of the chassis by charging the air-suspension while compressing
More information. For 4S/3M applications an Integrated Speed Switch (ISS)
Commercial Vehicle Systems Product DATA PD-203-430 Function The Knorr-Bremse KB4TA module is an integrated ABS electronic control unit and dual modulator valve for air braked trailers (semi-trailers, centre-axle
More informationFriction Material. Freight Cars High-Speed Trains Light Rail Vehicles Locomotives Metros Passenger Coaches Regional and Commuter Trains
Friction Material Applications Freight Cars High-Speed Trains Light Rail Vehicles Locomotives Metros Passenger Coaches Regional and Commuter Trains 2 KNORR-BREMSE A FULL LINER IN FRICTION MATERIAL Our
More informationWABCO Trailer EBS Now available for vehicles with mechanical suspensions too
WABCO Trailer EBS Now available for vehicles with mechanical suspensions too Since May 2005, the Trailer EBS has also been released for vehicles with mechancial (leaf-spring) supension. The necessary report
More informationTrailer brake and chassis control
COMMERCIAL VEHICLE SYSTEMS BRAKE AND CHASSIS CONTROL Trailer brake and chassis control TRAILER COMPETENCE 2 THE MUNICH-BASED KNORR-BREMSE GROUP IS THE WORLD S LEADING MANUFACTURER OF BRAKING SYSTEMS FOR
More informationDATA PD ES1305. Product. Trailer ABS (KB4TA) Function
V Commercial Vehicle Systems Product DATA PD-203-300 Function The Knorr-Bremse KB4TA module is an integrated ABS electronic control unit and dual modulator valve for air braked trailers with mechanical
More informationADR 38/04 trailer brake requirements Overview of the changes in the latest revision
ADR 38/04 trailer brake requirements Overview of the changes in the latest revision ADR 38/04 trailer brake requirements Definitions Antilock System (ABS) - a service brake system that automatically controls
More informationKnorr-Bremse RailServices
Knorr-Bremse RailServices Energy efficiency in rolling stock through Knorr-Bremse refurbishments 8th June 2016 Alexander Schwan Desiro EcoTrain VT 642 modernization Development of an innovative technology
More informationKnorr-Bremse Commercial Vehicle Systems. Training program, second half of 2017, Poland
Knorr-Bremse Commercial Vehicle Systems Training program, second half of 2017, Poland Information Trainings are conducted at Knorr-Bremse TruckeServices training center, Piaskowa 4/2 St., Warsaw Maximum
More informationMAN GUIDELINES TO FITTING BODIES. Coupling devices TG Edition 2018 V1.0
MAN GUIDELINES TO FITTING BODIES Coupling devices TG Edition 2018 V1.0 P U B L I S H E R MAN Truck & Bus AG (hereinafter referred to as MAN) Engineering Vehicle Truck Application Engineering Dachauer Str.
More informationPosition Paper. Anti-lock Braking for Agricultural Tractors
Position Paper Anti-lock Braking for Agricultural Tractors EUROPEAN ASSOCIATION OF AUTOMOTIVE SUPPLIERS CLEPA Prepared for the European Commission Expert Working Group Agricultural Tractors August 9 th,
More informationE/ECE/324/Rev.1/Add.54/Rev.2/Amend.3 E/ECE/TRANS/505/Rev.1/Add.54/Rev.2/Amend.3
26 April 2018 Agreement Concerning the Adoption of Harmonized Technical United Nations Regulations for Wheeled Vehicles, Equipment and Parts which can be Fitted and/or be Used on Wheeled Vehicles and the
More informationDATA PD LK..., LP... Product PD Air Compressors. Function. Technical Features
Commercial Vehicle Systems Product Doc. No. Y210611 DATA (EN - Rev. 000) Function The are piston-type and are used for generating compressed air to supply the air brake system, air suspension and auxiliary
More informationInstallation Guide ELECTRONIC HEIGHT SENSOR.
Installation Guide ELECTRONIC HEIGHT SENSOR www.haldex.com Electronic Height Sensor Introduction Electronic Height Sensor Electronic height sensor enables the EBS to be available for mechanical suspension
More informationFunction ECU, Wireless
Commercial Vehicle Systems Product DATA PD-551-000 Function ECU, Wireless The is a Gateway Receiver system to alert the driver if any monitored tyre runs under its normal pressure or above its normal temperature.
More informationMAN GUIDELINES TO FITTING BODIES. Coupling devices TG Edition 2018 V1.0
MAN GUIDELINES TO FITTING BODIES Coupling devices TG Edition 218 V1. P U B L I S H E R MAN Truck & Bus AG (hereinafter referred to as MAN) Engineering Vehicle Truck Application Engineering Dachauer Str.
More informationTrailers Catalogue AB Umega Tel. (389) Metalo 5, LT Utena Fax (389)
Trailers Catalogue SPA3-3 way tipping trailer Body frame: Body sides are made of profiled steel sheets, sides of 2 mm steel, body flor made of 3 mm steel. All body sides are removable; Chassis: Strong
More informationThis document is a preview generated by EVS
INTERNATIONAL STANDARD ISO 7641 First edition 2012-11-15 Road vehicles Trailers up to 3,5 t Calculation of the mechanical strength of steel drawbars Véhicules routiers Remorques jusqu à 3,5 t Calcul de
More informationEconomic and Social Council
UNITED NATIONS Economic and Social Council Distr. GENERAL TRANS/WP.29/78/Rev.1/Amend.2 16 April 1999 ENGLISH Original: ENGLISH and FRENCH ECONOMIC COMMISSION FOR EUROPE INLAND TRANSPORT COMMITTEE Working
More informationStandard Cylinder Series SZ 100
Standard Cylinder Series SZ 100 Maximum operating pressure up to 100 bar Choice of 13 different piston sizes between 12 und 200mm and 23 different attachments Rugged yet compact design with good guiding
More informationN G 3 S p r i n g B r a k e s
C o m m e r c i a l V e h i c l e S y s t e m s P r o d u c t M a n u a l N G 3 S p r i n g B r a k e s R ationalised Units for S-Cam Applications P r o d u c t M a n u a l Disclaimer The information contained
More informationService Manual AIR PROCESSING UNIT ZB44.. Y (EN - Rev. 003) NOVEMBER l. 20 l. ZB44.. type APU. 23 Ø nozzle defined in procedure
Y000 - (EN - Rev. 00) NOVEMBER 04 Service Manual T T6 0 l T7 G Pressurised air 8 Bar Nozzle Check valve G T9 T G T T0 0. l T ZB44.. type APU T G4 0. l T G Ø nozzle defined in procedure T4 0. l T G6 Used
More informationRE / Central Hydraulics Valve LT43 for Tractors with Priority Function for Steering and Trailer Brake and Pilot Oil Valve.
Central Hydraulics Valve LT43 for Tractors with Priority Function for Steering and Trailer Brake and Pilot Oil Valve RE 66 235/07.95 Characteristics Input element with priority and pilot oil valve for
More informationCEMA position on draft braking regulation, 4 June 2008 ENTR/F1/ /rev16
CEMA PT16 N05Rev CEMA position on draft braking regulation, 4 June 2008 ENTR/F1/5030-99/rev16 CEMA is the European association representing the agricultural machinery industry. It represents the industry
More informationSteering unit LAGC. Data sheet
Steering unit LAGC Data sheet Nominal sizes Series Maximum flow HE 14365 / 09.2017 40 1000 1 x and 2 x 80 l / min 2 LAGC HE 14365 / 09.2017 Page Content 4 4 5 6 7 8 9 10 11 12 13 14 Features Ordering details
More informationThe GK units differ from the LK units in that the springs of the GK units have a spring eye at the front.
01 09 Installation guidelines Mechanical suspension units GK LK GN0032-0 Mechanical suspension units GK LK The GK units differ from the LK units in that the springs of the GK units have a spring eye at
More informationAir Braking Equipment for Towed Vehicles in Accordance with Council Directive 71/320/ EEC
Air Braking Equipment for Towed Vehicles in Accordance with Council Directive 7/0/ EEC Diagrammatic Views and Description of Braking Systems and Air Braking Equipment. Edition 85 000 080 85000080 This
More informationFunction ECU, Wireless
Commercial Vehicle Systems Product DATA PD-551-000 Function ECU, Wireless The is a Gateway Receiver system to alert the driver if any monitored tyre runs under its normal pressure or above its normal temperature.
More informationBRAKE INFORMATION FOR FKH AXLES
BRAKE INFORMATION FOR FKH AXLES S-CAM ROTATION ON DRUM BRAKE AXLES It is our recommendation (it is also a general industry recommendation) to install Drum Brake Axles so that the S-Cams rotate in the same
More informationTechnical Report. No. KO250.3E. on the TRAILER CONTROL MODULE
Technical Report No. KO250.3E on the TRAILER CONTROL MODULE Mobilität TÜV NORD Mobilität GmbH & Co. KG IFM Institute for Vehicle Technology and Mobility Adlerstraße 7 45307 Essen Tel.: +49 (0)201 825-4120
More informationISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 3767-1 Third edition 1998-12-15 AMENDMENT 1 2008-11-15 Tractors, machinery for agriculture and forestry, powered lawn and garden equipment s for operator controls and other displays
More informationSteering unit LAGZ. Data sheet. Series 2 x
Steering unit LAGZ Data sheet Nominal sizes 125 620 Series 2 x Maximum flow 50 l / min HE 11868 / 09.2017 2 LAGZ HE 11868 / 09.2017 Page Content 4 4 5 6 7 8 9 10 11 12 13 14 Features Ordering details Function,
More informationSetting the Standards Trailer Component Suppliers Perspective
Setting the Standards Trailer Component Suppliers Perspective Mario Colosimo BPW Historical Perspective For many years trailers had to be cheap to buy, with little consideration to whole of life costs.
More informationHASSE & WREDE VISCO DAMPER AFTER SALES SERVICE. Visco damper AFTER SALES SERVICE
HASSE & WREDE VISCO DAMPER AFTER SALES SERVICE Visco damper AFTER SALES SERVICE 2 HASSE & WREDE VISCO DAMPER AFTER SALES SERVICE FUNCTION A viscous damper consists of a housing which comprises an inertia
More informationISO Earth-moving machinery Wheeled or high-speed rubber-tracked machines Performance requirements and test procedures for brake systems
INTERNATIONAL STANDARD ISO 3450 Fourth edition 2011-11-01 Earth-moving machinery Wheeled or high-speed rubber-tracked machines Performance requirements and test procedures for brake systems Engins de terrassement
More informationSplined Disc Brake Disc 22.5
Service Manual Splined Disc Brake Disc 22.5 Service kits Description / Function Service instructions Service Manual Disclaimer The information contained herein is intended for the exclusive use of trained
More informationJSK 34. Installation and operating instructions
JSK 34 EN Installation and operating instructions Table of contents 1 Explanation of symbols... 3 2 Safety information... 4 2.1 Safety information for operation... 4 2.2 Safety information for installation...
More informationMiniature Ball Rail Systems
R310EN 2210 (2004.06) The Drive & Control Company 2 Bosch Rexroth AG Linear Motion and Assembly Technologies Miniature-BRS R310EN 2210 (2004.06) Linear Motion Systems Ball Rail System Standard Ball Rail
More informationHydraulic cylinder Type LHZ
Hydraulic cylinder Type LHZ Double acting Diam. 0 mm PN [pmax.] = 2 bar Connecting dimensions Diam. to following CETOP R 8 H and ISO/DIS /I Diam. to 0 as per CETOP R 73 H and ISO/DIS 7..0.08 Symbol Description
More informationAir Processing Unit ZB44..
Systems for Commercial Vehicles Service Manual Air Processing Unit ZB44.. Disclaimer The information contained herein is intended for the exclusive use of trained persons within the commercial vehicle
More informationCentral Hydraulics Valve for Tractors with Priority Function for Steering, Trailer Brake and Pilot Oil Valve
Central Hydraulics Valve for Tractors with Priority Function for Steering, Trailer Brake and Pilot Oil Valve RE 66235/07.06 Replaces: 05.03 /8 Type LT 43 Series 2X Maximum system pressure 250 bar H/A4629/95
More informationVOLKSWAGEN TRANSPORTER AL-KO CHASSIS TECHNOLOGY
VOLKSWAGEN TRANSPORTER AL-KO CHASSIS TECHNOLOGY AL-KO CHASSIS TECHNOLOGY Note: l Base vehicle Volkswagen Transporter cab l PR no. (VW order no. for cab) l ZG6: Cab (front axle 1710 kg, tyres 17 ) l SL4:
More informationRE / STAR Tolerance Rings STAR Ball Knobs, Knob and Lever Type Handles
RE 2 970/.99 STAR Tolerance Rings STAR Ball Knobs, Knob and Lever Type Handles STAR Tolerance Rings Product Overview Tolerance rings are made of hard, embossed spring steel strip and belong to the class
More informationTechnical description... 1 Limit switch versions MR 6 Power tables... 6 Dimensions... 7 Spare part lists... 8
Index Technical description... 1 Limit switch versions... 3 MR 6 Power tables... 6 Dimensions... 7 Spare part lists... 8 MS 12 Power tables... 10 Dimensions... 11 Spare part lists... 13 MR 30 Power tables...
More informationFür Modellreihen / for Series / pour les séries
Montage- und Betriebsanleitung Installation and operating instructions Instructions de montage et d utilisation D F Member of JOST-World Für Modellreihen / for Series / pour les séries RO i850 B RO i860
More informationContent. Chapter 1 Hydraulic energy converters... 10
Content Chapter 1 Hydraulic energy converters... 10 1.1 List of symbols... 13 1.2 Hydraulic pump types, constant output... 14 1.2.1 External gear pumps... 16 1.2.2 Internal gear pumps... 17 1.2.3 Vane
More informationHydraulic remote controls
Hydraulic remote controls RE 6 558/05.06 1/10 Replaces: 05.03 Type TH7 Type 1TH7Z Type 1TH7QL Type 2TH7Q Series 1X Type 2TH7N Type TH7G Contents Functional description, symbol 2 Technical data 2 details
More informationDisc Brakes with Eldro. Safety. Made in Germany.
Disc Brakes with Eldro. Safety. Made in Germany. Disc Brakes with Eldro PINTSCH BUBENZER Disc Brake SB 28.3 / SB 23.3 with Eldro PINTSCH BUBENZER is certified according to DIN EN ISO 9001:2008 Ed 201/6
More informationTHE NETHERLANDS (N E D E R L A N D) ECE R13, Annex 11 Appendix 3 Test report as prescribed in Paragraphs and of Appendix 2 to this Annex
Vehicle Technology Division THE NETHERLANDS (N E D E R L A N D) ECE R13, Annex 11 Appendix 3 Test report as prescribed in Paragraphs 3.7.1. and 3.7.2. of Appendix 2 to this Annex Test report number: RDW
More informationVOLKSWAGEN TRANSPORTER AL-KO COMMERCIAL VEHICLE CHASSIS 13
VOLKSWAGEN TRANSPORTER AL-KO COMMERCIAL VEHICLE CHASSIS 13 ESP Standard! AL-KO COMMERCIAL VEHICLE CHASSIS 13 3-axle AL-KO CHASSIS with 13 torsion guide rear axles BASE VEHICLE Volkswagen Transporter cab
More informationas a voltage from 0 to 10 V or as a current from 4 to 20
You can use the actuators from Berger Lahr to position flaps, valves or slides with great precision. Inside the compact servo drive housing there is a motor, a gearbox and a control unit. There is a choice
More informationKLP Kiepe Electric GmbH Test and Measuring SERVICES
Test and Measuring THE AUTOMATIC TEST SYSTEM KIEPE ATS The Automatic Test System Kiepe ATS is a function tester for electronic modules and control devices. The Kiepe ATS can be used to test all kinds of
More informationVOLVO GROUP AMERICAS
Overview of Volvo/ Mack Technology 6x2 Tractors Tim LaFon, Vice President Regulatory Affairs VOLVO GROUP AMERICAS Three Bus Brands & Four Truck Brands 1 WHAT I HOPE TO ACCOMPLISH Raise level of awareness
More informationTHE NETHERLANDS (N E D E R L A N D) ECE R13, Annex 11 Appendix 3 Test report as prescribed in Paragraphs and of Appendix 2 to this Annex
Vehicle Technology Division THE NETHERLANDS (N E D E R L A N D) ECE R13, Annex 11 Appendix 3 Test report as prescribed in Paragraphs 3.7.1. and 3.7.2. of Appendix 2 to this Annex Test report number: RDW
More information} Rev.1/Add.12/Rev.6/Amend.4
30 December 2009 AGREEMENT CONCERNING THE ADOPTION OF UNIFORM TECHNICAL PRESCRIPTIONSFOR WHEELED VEHICLES, EQUIPMENT AND PARTS WHICH CAN BE FITTEDAND/OR BE USED ON WHEELED VEHICLES AND THE CONDITIONS FOR
More informationLinear Drive with Ball Screw Drive Series OSP-E..SB
Linear Drive with Ball Screw Drive Series OSP-E..SB Contents Description Data Sheet No. Page Overview 1.30.001E 47-50 Technical Data 1.30.002E-1 to 5 51-55 Dimensions 1.30.002E-6, -7 56-57 Order instructions
More informationIPVP High-pressure Internal Gear Pumps for Variable Speed Drives
IPVP High-pressure Internal Gear Pumps for Variable Speed Drives Design and Function 7 6 5 9 2 5 6 7 8 2 9 4a 4b 3 Pinion shaft 2 Internal gear 3 Filler pin 4a Filler segment carrier 4b Filler sealing
More informationProduct features & Overview. N1 - N4 A Rotary and part-turn actuators
Product features & Overview N1 - Rotary and part-turn actuators 20 N1 - Rotary and part-turn actuators Rotary and part-turn actuators Product features Wide torque range Wide selection of output shafts
More informationEconomic and Social Council
United Nations Economic and Social Council ECE/TRANS/WP.29/2017/69 Distr.: General 6 April 2017 Original: English Economic Commission for Europe Inland Transport Committee World Forum for Harmonization
More informationTAG LIFT AXLE SUSPENSION SERVICE MANUAL- 37 T
TAG LIFT AXLE SUSPENSION SERVICE MANUAL- 37 T ` Page 0 CONTENT SI.NO Description Page No. 1 Suspension Specification 2 2 Pre-Installation Notes 2 3 Suspension Parts Description 3 4 Dismantling Procedure
More informationDirectional valves Mechanically operated Series AP - inch. Brochure
Directional valves Mechanically operated Brochure 2 Directional valves Mechanically operated Qn= 150-250 l/min pipe connection compressed air connection output: 1/8-27 NPTF 3 Actuating controls for AP/ST
More informationIPVP High-pressure Internal Gear Pumps for Variable Speed Drives Technical Data Sheet
IPVP High-pressure Internal Gear Pumps for Variable Speed Drives Technical Data Sheet Design and Function 7 6 5 9 2 8 2 9 4a 4b 3 Pinion shaft 2 Internal gear 3 Filler pin 4a Filler segment carrier 4b
More informationOPERATING INSTRUCTIONS
Emergency Cord Switch Type PRS Device identification No.: 91.054 033.001, /.101 and /.201 OPERATING INSTRUCTIONS 2 CE Sign and Conformity The device meets the requirements of the valid European and national
More informationS840, S845, S846 Series Single-break changeover, NC or NO contacts, positive opening operation and wiping action Catalogue D40.en
Snap-action switches S80, S85, S86 Series Single-break changeover, NC or NO contacts, positive opening operation and wiping action Catalogue D0.en Snap-action switches, S80, S85, S86 Series Single-break
More informationInstallation and Operation Instructions RINGFEDER Type 2050 AM RINGFEDER Type 2050 AP
Installation and Operation Instructions RINGFEDER Type 2050 AM RINGFEDER Type 2050 AP 22.10.2003 10069125 Type 2050 AM General RINGFEDER Type 2050 AM, part no.: 14994532 RINGFEDER Type 2050 AP, part no.:
More informationHF box power packs. dc box power packs for mobile applications
HF box power packs dc box power packs for mobile applications HF box power pack series Hydraulfunktion has more than 20 year successfully manufactured and constantly improved box type dc power packs. HF
More informationMontage- und Betriebsanleitung Sattelkupplung JSK 26 D 5. Installation and operating instrutions for fifth wheel coupling JSK 26 D 17
Montage- und Betriebsanleitung Sattelkupplung JSK 26 D 5 Deutsch Installation and operating instrutions for fifth wheel coupling JSK 26 D 7 Instructions de montage et de d utilisation pour sellette d attelage
More informationPower Transmission. Installation and Operating Instructions for Brake Caliper DV / DH 020 FKM. E e.
Power Transmission Installation and Operating Instructions for Brake Caliper DV / DH 020 FKM Schaberweg 30-34 Telephone +49 6172 275-0 61348 Bad Homburg Telefax +49 6172 275-275 Germany www.ringspann.com
More informationE/ECE/324/Rev.1/Add.57/Rev.2/Amend.4 E/ECE/TRANS/505/Rev.1/Add.57/Rev.2/Amend.4
11 July 2016 Agreement Concerning the Adoption of Uniform Technical Prescriptions for Wheeled Vehicles, Equipment and Parts which can be Fitted and/or be Used on Wheeled Vehicles and the Conditions for
More informationPlatform Systems. applications
Rail Systems Platform Systems applications Heavy Metro Systems Light Rail Systems Automated Metros APMs - Airport Link/City Shopping New and Retrofit Installations Underground, Over-ground and Elevated
More informationBinding agent spreader MC series
Technical specification Binding agent spreader MC series SW 12 MC SW 16 MC SW 20 MC Technical specification 02 03 Binding agent spreader SW 12 MC Container Container capacity 15.7 yd³ (12 m 3 ) Size of
More informationBR 30a. Pneumatic Multi-turn Actuator. Application: Special designs:
Pneumatic Multi-turn Actuator BR 30a Application: Single-acting pneumatic diaphragm multi-turn actuator for butterfl y valves and other rotary valves: The pneumatic BR 30a Multi-turn Actuators are diaphragm
More informationSteering unit LAGU. Data sheet
Steering unit LAGU Data sheet Nominal sizes Nominal pressure Maximum flow HE 11867/09.2017 125 320 175 bar 50 l / min 2 LAGU HE 11867 / 09.2017 Page Content 4 4 5 6 7 8 9 10 11 12 13 14 Features Ordering
More informationBPW height-adjustable drawbars
Maintenance instructions ZAV BPW BERGISCHE ACHSEN BPW height-adjustable drawbars Series ZAV REPAIR, MAINTENANCE AND OPERATING INSTRUCTIONS Maintenance and Operating Instructions ZAV Table of contents:
More informationProvläsningsexemplar / Preview INTERNATIONAL STANDARD. Motorcycles - Brakes and braking devices - Tests and measurement methods
INTERNATIONAL STANDARD ISO 8710 First edition 1995-08-01 Motorcycles - Brakes and braking devices - Tests and measurement methods Mo tocycles - Freins et dispositifs de freinage - Methodes d essai et de
More informationWinch control block. RE 65051/08.04 Replaces: Type YM-WCB
Winch control block RE 65051/08.04 Replaces: 02.00 1/12 Type YM-WC Noal size 16 Component series 4X Maximum operating pressure 315 bar Maximum flow 300 / H6537 Overview Contents age Features 1 Ordering
More informationHydraulic Caliper Disc Brakes SF Series
Hydraulic Caliper Disc rakes SF Series SF SF 30 SF 1 SF 4 4 380 3 3 30 80 0 1 1 10 0 rake torque in knm DIN ISO 01 : 0 QA-Nr.: 0 1941 SF 80 UENZER REMSEN is certified according to DIN EN ISO 01:0 00 1
More informationHydraulic Motor (Radial piston multi-stroke)
RE 15 207/03.94 Hydraulic Motor (Radial piston multi-stroke) Type MCR 10, Series 3X RE 15 207/02.98 Sizes 7 to1340 up to 450 bar up to 1340 cm 3 up to 27 Nm Replaces: 10.97 Compact, robust construction
More information01 09 Installation guidelines Air suspension units GL70 GL70HD GL70L GN Air suspension units GL70 GL70HD GL70L
01 09 Installation guidelines Air suspension units GL70 GL70HD GL70L GN0031-1 Air suspension units GL70 GL70HD GL70L can be identified by the hanger brackets with a welded-on support for the eccentric
More informationEUMOS SYMPOSIUM 2017
EUMOS SYMPOSIUM 2017 CONTACT Martin Keller TÜV NORD Mobilität GmbH & Co. KG IFM Whole Vehicles Safety of Loads Group Phone: 0049 (0) 511/ 9986-1274 Fax: 0049 (0) 511/ 9986-1998 ladungssicherung@tuev-nord.de
More informationRigid 8 2. Rigid 8 4
DRIVE / CHASSIS HEIGHT / WHEELBASE (dimensions in dm) Rigid Rear 34 40 40 Rigid 6 2 Rear 48 48 48 Rigid 6 4 Rear Rigid 8 2 Rear Pusher Tridem 62 Rear Tag Tridem Rigid Pusher Tridem 64 64 53 53 47 1 chassis
More informationECO Plus 2 - The new generation of the proven BPW ECO Unit
BPW-NEWS Allg 7125703e BPW NEWS BPW BERGISCHE ACHSEN ECO Plus 2 - The new generation of the proven BPW ECO Unit The BPW ECO Unit has proven itself millions of time over, and its ECO Plus version will be
More informationHydraulic pilot control units for armrest installation
Hydraulic pilot control units for armrest installation RE 64 555/04.06 /2 Replaces: 05.05 Type 4TH5, 4TH6, 4TH6N Series Contents Functional description, section, symbol 2 Technical data 3 Ordering details
More information> piston force up to 20,1 kn. > operating pressure 250/350 bar. > chemically nitrided body. > piston force up to 44,0 kn. > operating pressure 350 bar
Vertical and link CLAMPS for DEMANDING TASKS vertical CLAMP > piston force up to 20,1 kn > operating pressure 250/350 bar > chemically nitrided body link CLAMP > piston force up to 44,0 kn > operating
More information