Table of Contents. 1.1 Flex Power In-Line Air Tools (Lever & Push-to-Start) 1.2 Flex Power Pistol Grip Air Tools
|
|
- Kellie Lester
- 6 years ago
- Views:
Transcription
1
2 Table of Contents. Flex Power InLine Air Tools (Lever & PushtoStart).2 Flex Power Pistol Grip Air Tools.3 Flex Power Right Angle Air Tools.4 EZTorQ (Torque Analyzers). TorqueLab LTTSeries (Torque, Angle & Force Analyzers). EZGlider Linear Torque Arm.7 EZSlider Torque Arm. EZGlider Articulated Torque Arm.9 EZGlider Telescoping Torque Arm.0 EZGlider Telescoping Torque Arm. EZGlider Position Control Torque Arm.2 Accessories.3 Special Bits.4 Bit Holders & Nutsetters. Power Bits. Power Bits.7 Tool Balancers. Flex Power InLine Pulse Tools.9 Flex Power Pistol Pulse Tools.20 Flex Power Right Angle Pulse Tools.2 Sleeve Drive Impact Sockets. Pulse Tool Selection Guide TABLE OF CONTENTS i MC 4 (version.0)
3 InLine Pneumatic Screwdrivers KEY FEATURES Various models that range from lbf.in High performance oil free motor delivers environmentally friendly, durable, power and speed. One third more power than competitive models. Safe operation with reduced noise, vibration and low torque reaction. High accuracy patented clutch with precision automatic shutoff. Soft texture ergonomic grip for operator comfort. One touch torque adjustment, eliminates difficult set up of drivers. Torque nut cover prevents operator tampering. Four different colored tool bands allow color coding of specific torque values (Red, Green, Blue, Yellow are included) Built with new aluminum alloy to provide durability and reduced maintenance no cracking, fading or chipping found in composite body tools. Wide ranges and RPM selections all for easy tool specification based on application requirements. XP3 XP3PS XP40 XP40PS XP4 XP4PS XP4 XP4PS XP0 XP0PS Driver Type Lever Start PushtoStart Lever Start PushtoStart Lever Start PushtoStart Lever Start PushtoStart Lever Start PushtoStart Torque Ranges lbf.in N.m COLOR CODE RINGS Four different colored tool bands allow color coding of specific torque values (Red, Green, Blue, Yellow are included) RPM Grip Dia. /4" /4" /4" /4" /4" /4" /2 /2" /2" /2" Length " 7" " 7" " 7" 9 /2" /2" 9 /2" /2" Drive Size /4" F/Hex /4" F/Hex /4" F/Hex /4" F/Hex /4" F/Hex /4" F/Hex /4" F/Hex /4" F/Hex /4" F/Hex /4" F/Hex Weight lbs Noise dba Air Usage cfm Min. Air Hose Bore.0 mm.0 mm.0 mm.0 mm.0 mm.0 mm.0 mm.0 mm.0 mm.0 mm EZGLIDER The torque arm keeps the tool perpendicular and prevents cross threading and side load. Maneuvers smoothly as arm absorbs torque reaction. Fastening Capacity Machine Tapping Screw Dia Screw Dia M2.2 M4. M.7 M3. M2.2 M4. M.7 M3. M2. M.2 M2.2 M4.2 M2. M.2 M2.2 M4.2 M3.3 M. M2.7 M4.7 M3.3 M. M2.7 M4.7 M3. M.3 M2. M.3 M3. M.3 M2. M.3 M.0 M7. M4.0 M.3 M.0 M7. M4.0 M.3 InLine Mountz MC4 catalog Copyright 2009 all rights reserved
4 Pistol Grip Pneumatic Screwdrivers KEY FEATURES Various models that range from 2..2 lbf.in. High performance oil free motor delivers environmentally friendly, durable, power and speed. One third more power than competitive models. Safe operation with reduced noise, vibration and low torque reaction. High accuracy patented clutch with precision automatic shutoff. Soft texture ergonomic grip for operator comfort. Onetouch torque adjustment, eliminates difficult set up of drivers. Torque nut cover prevents operator tampering. Built with new aluminum alloy to provide durability and reduced maintenance no cracking, fading or chipping found in composite body tools. Wide ranges and RPM selections all for easy tool specifications based on application requirements. Patented MultiAir inlet selection (handle, back and top) provides versatility for hose connection depending on application. Provides flexible options for production set ups and space restrictions. B C B C MULTIAIR SELECTION 3 locations to attach air hose: A Handle B Top C Back A A XP3P XP4P XP4P XPP XPP Torque Ranges lbf.in N.m RPM Grip Dia. /4" /4" /2 /2" /2" Length 7" 7" /2" /2" /2" Drive Size /4" F/Hex /4" F/Hex /4" F/Hex /4" F/Hex /4" F/Hex Weight lbs Noise dba Air Usage cfm Min. Air Hose Bore.0 mm.0 mm.0 mm.0 mm.0 mm Fastening Capacity Machine Tapping Screw Dia Screw Dia M2.2 M4. M.7 M3. M2. M.2 M2.2 M4.2 M3. M.3 M2. M.3 M3. M.9 M3.0 M.9 M.0 M9.3 M4.0 M7.2 ISO 900and ISO 702 Company PISTOL GRIP.2
5 Right Angle Pneumatic Screwdrivers KEY FEATURES Various models that range from lbf.in. High performance oil free motor delivers environmentally friendly, durable, power and speed. One third more power than competitive models. Safe operation with reduced noise, vibration and low torque reaction. High accuracy patented clutch with precision automatic shutoff. Soft texture ergonomic grip for operator comfort. Onetouch torque adjustment, eliminates difficult set up of drivers. Torque nut cover prevents operator tampering. Four different colored tool bands allow color coding of specific torque values (Red, Green, Blue, Yellow as standard are included) Built with new aluminum alloy to provide durability and reduced maintenance no cracking, fading or chipping found in composite body tools. Wide ranges and RPM selections all for easy tool specification based on application requirements. XP3A XP40A XP4A XPA XP0A Torque Ranges lbf.in N.m RPM Grip Dia. /4" /4" /2" /2" /2" Length /4" /4" 3 /4" 3 /4" 3 /4" Drive Size /4" F/Hex /4" F/Hex /4" F/Hex /4" F/Hex /4" F/Hex Weight lbs Noise dba Air Usage cfm Min. Air Hose Bore.0 mm.0 mm.0 mm.0 mm.0 mm Fastening Capacity Machine Tapping Screw Dia Screw Dia M2.2 M4. M.7 M3. M2. M.2 M2.2 M4.2 M3. M.3 M2. M.3 M3. M.9 M3.0 M.9 M.0 M7. M4.0 M.3 COLOR CODE RINGS Four different colored tool bands allow color coding of specific torque values (Red, Green, Blue, Yellow are included) COIL AIR HOSE Dual swivel hose fittings provide 30 rotation. Right Angle Mountz MC4 catalog Copyright 2009 all rights reserved
6
7 LTT0i LTT2i LTT0i LTT00i LTT20i LTT0F LTT00F LTT20F LTT. Torque Analyzers CABLE CHART Cable Transducer RTSXA All BLRTSX models BMX LPX SDX RTSX ETX American 0 lbf.in 2. 2 lbf.in 0 lbf.in 0 00 lbf.in 2 20 lbf.in 0 lbf.ft 0 00 lbf.ft 2 20 lbf.ft Torque Ranges S.I. Metric.3 3 cn.m.2. kgf.cm cn.m kgf.cm. cn.m. 7. kgf.cm 3 cn.m. kgf.cm cn.m 2. 2 kgf.cm. 7. N.m kgf.m N.m.4 3. kgf.m N.m kgf.m ACCESSORIES INCLUDED Universal Charger (00 240VAC) USB Cable Mountz Software Programs Run Down Adapter Case Drive Size /4" F/Sq /4" F/Sq /4" F/Sq /4" F/Sq /4" F/Sq 3/" F/Sq /2" F/Sq /2" F/Sq ACCESSORIES OPTIONAL Description Wt. lbs. lbs. lbs. lbs. lbs. lbs. lbs. lbs. Charger VAC 7700 USB Cable Battery Pack 0720 Multiplexer Bar Code Reader Mounting Bracket (for LTT model 0i0F) 0720 Mounting Bracket (for all other LTT models) 0720 PLC Interface TorqueLab LTT Series Torque, Angle & Force Analyzer with ARCII Technology KEY FEATURES Accuracy 0.% of reading from 20% to 00% of full scale. Accuracy % of reading from 0% to 20% of full scale. Recommended for all hand screwdrivers, wrenches, or power tools. Features a builtin transducer and can connect to an external transducer. Provides EZPlug & Play with Mountz Transducers. Features ARCII technology, an instant autorecognition system of the transducer connected to the LTT. Selection of six operation modes: Track, Peak, First Peak, Audit, Spindle Audit, and Torque + Angle Seven units of torque measurements: ozf.in, lbf.in, lbf.ft, cn.m, N.m, kgf.m, kgf.cm Two units of force measurement: lbf and kn Features builtin Tool Tests operation. Includes three PC Windows based software programs: Mountz Torque Meter Interface Program for sensor calibrations, meter calibration and tool tests. Torque Meter Bootloader for updating the LTT operating systems. Excel AddIn for RealTime data collection into an Excel spreadsheet. It provides statistics calculations. Flash memory allows upgrades to be done by the user in the field & internet through the USB port. Five lowpass filters: 00, 2000, 00, 00, and 200Hz Sixdigit display and easy to read menu structure. Real Time Clock for time stamping of readings. USB interface to download readings to PC. High Capacity Liion Batteries for long life ( hours with standard transducers and hours with brushless rotary). Can connect to most mv/v transducers and can store calibration data for up to 0 nonsmart torque sensors. The VDC capability allows unit to be used with a Brushless Rotary Transducer for testing pulse tools and high RPM tools. Torque and Angle data is displayed simultaneously when used with Torque and Angle transducers, up to 000 RPM for angle measurement. Stores a total of 000 data points. Real time graph of torque vs. time using associated PC Windows software. Features Go / No Go LEDs that illuminate when high or low setting is achieved. PLUG & PLAY NOTE! Since a tester cannot always duplicate actual joint characteristics, the torque reading displayed on the LTT may vary from the actual torque that a tool will apply to a joint. When critical assemblies are involved, the torque output of the power tool being used should be verified on the actual assembly using a calibrated measuring torque tool. CERTIFIED Supplied with NISTTraceable Certification of Calibration
8 EZGlider Linear Torque Arms KEY FEATURES Prevents cross threading and side load. Keeps tool perpendicular. Reduces RMI (Repetitive Motion Injury) and CTS (Carpal Tunnel Syndrome) while boosting production. Extends in horizontal direction and arm length is adjustable. Maneuvers smoothly as the arm absorbs torque reactions from electric & pneumatic tools. Built with seasoned craftsmanship, every torque arm cylinder has four rows of ball bearings for smooth movement. A magnet on the backside of the tool clamp holds driver firmly against arm. Includes an inline driver clamp. LINEAR TORQUE ARMS Max Torque American S.I. EZ2 EZ2 EZ40 EZ lbft.ft.4 lbft.ft 29. lbft.ft 73.7 lbft.ft 2 N.m 2 N.m 40 N.m 00 N.m Clamp Dia. /2" 2" 2" 2" Height 32 /2" 3 /2" 40 /2" 40 /2" Min Arm Reach /2" /3" 2 7 /" 2 /3" Max Arm Reach " " 29 /2" 33" Balancer Capacity. 2. lbs lbs lbs lbs. Driver & Transformer not included. NOTE! An additional balancer (202) can be added to the EZ40 & EZ00 model to increase balancer capacity. The additional balancer increases the dual balancer capacity to.3. for the EZ40, and. 3.2 for the EZ00. ACCESSORIES ServoAssisted System EZ2 EZ2 EZ40/00 EZ2 EZ2 EZ40/00 EZ40/00 EZ00 Description ServoAssisted Electric Kit 2009 ServoAssisted Electric Kit ServoAssisted Electric Kit 2000 Easy Push Electric Kit 200 Easy Push Electric Kit 2004 Easy Push Electric Kit Easy Push Electric Kit Easy Push Electric Kit 2003 DOWNWARD ASSISTANCE KIT These kits are ideal for selftapping applications. The downward assistance system requires no effort from the operator to press downward on the driver as the operator simply presses the trigger of the driver and the cylinder glides the tool downward automatically. There are two system options available Easy Push and ServoAssisted. ServoAssisted system features a built in collet chuck that allows the system to be used at any height. Easy Push system operates only at a preset height by using a mechanical stop that is set along the pole. Both systems can be installed on a Linear or Articulated arm. Pushing Force lbs. 7. lbs. 7. lbs. lbs. 9. lbs. 9. lbs. 33 lbs. lbs. Stroke 4 7 /" /4" 7 7 /" 7 7 /" 7 7 /" EXTENSION SLIDES Expands the maximum arm reach of the EZGlider Linear Arms. EZ2 EZ2 EZ40 EZ00 Extends Max. Arm Reach 27." 27." 3" 4" EXTENSION DOUBLE SLIDE Expands the maximum arm reach of the EZGlider Linear Arms by adding a second slide to the arm. EZ2 EZ2 EZ40 EZ00 Extends Max. Arm Reach 3."." 4" 4" ARP SYSTEM (not pictured) ARP (automatic rest position): A recoil spring positioned on the slide to permit the arm to come back to the rest position as soon as you release it. EZ EZ EZ EZ00 ANTIROTATING CLAMP Attach an AntiRotating Clamp to prevent the arm from rotating sidetoside to help the operator target the screw quickly and precisely. for EZ2 & 2 Linear Arms 2009 for EZ40 & 00 Linear Arms 200 EZGLIDER.
9 EZSlider Sliding Torque Arms KEY FEATURES An ideal ergonomic solution for multitool applications such as a moving production and assembly line. Ideal for automotive production lines. Maintenance Free. Arm is crafted with a lightweight durable carbon fiber. Easy to install and improves operator comfort and productivity. Requires little space and doesn t disrupt production flow. Mountable with a standard rail system, trolley, aluminum extrusion, wall or existing work station. Eliminates torque reaction of power tools. Can be used with a variety of assembly tools like angle nutrunners and electric & pneumatic screwdrivers. Arm slides up and down and provides X & Y axis mobility. EZSLIDER TORQUE ARMS Max Torque lbf.ft N.m Clamp Dia. Max Vertical Stroke Balancer Capacity EZSlider EZSlider EZSlider 40 EZSlider * * 2" 2" 7 3 /4" 7 3 /4" /2" /2" 4.4. lbs lbs lbs. 7. lbs. * The EZSlider & comes with a standard 3/" air fitting. An electric tool clamp is sold separately. Rail not included. ACCESSORIES GLIDING RAIL SYSTEM EZSlider arm slides up and down. Gliding Rail System allows the EZSlider arm to glide horizontally (sidetoside) on a production floor. Combine these two items and get the Slide & Glide movement. The Gliding Rail System can mount to a standard rail system, wall, aluminum extrusion or existing overhead system and is available in a variety of lengths. The EZSlider mounts on to the Carriage. Each Gliding Rail System includes one Carriage. (Standard Gliding Rail System pictured) Standard Gliding Rail System (for EZSlider, & 40) High Torque Gliding Rail System (for EZSlider 0) Working Distance/ 40mm #2003 0mm 0mm 00mm 30mm 0mm #2004 #200 #200 #2007 # mm 20mm 320mm 20mm #203 #2032 #2033 #2034 Pivot joints allow total movement and flexibility. CARRIAGE (Only for Standard Gliding Rail System) Additional Carriages can be purchased separately and added only to the Standard Gliding Rail System, which allows for multiple Slider Arms to be used freely on a rail system. A Thrust Stopper should be placed between each carriage EZSLIDER.7 BALANCER CARRIAGE Features a hook for mounting a tool balancer. It can only be mounted to the Standard Gliding Rail System THRUST STOPPER When having multiple carriages mounted to the Standard Gliding Rail System, it s recommended to place a Thrust Stopper between each carriage TOOL CLAMP FOR ELECTRIC DRIVERS Clamp Dia. EZSlider EZSlider " 2" *Clamps for VZ & VBSeries models ONLY. Driver not included. Mountz MC4 catalog Copyright 200 all rights reserved
10 EZGlider Articulated Torque Arms KEY FEATURES Prevents cross threading and side load. Keeps tool perpendicular. Reduces RMI (Repetitive Motion Injury) and CTS (Carpal Tunnel Syndrome) while boosting production. With the ability to bend like an elbow, the torque arm provides agility to position the tool in a variety of positions for different applications. Arm can be set at an inclination of 0,. & 4. Provides smooth flexible range as the arm absorbs torque reactions from electric & pneumatic screwdrivers, angle nut runners, pulse tools, pistol grip style tools, grinders & drills. Arm length is adjustable. Includes an inline driver clamp. Versatile torque arm works with a variety of tools, using different tool clamp options: angle drivers, pistol grip drivers & inline drivers. Driver & Transformer not included. ARTICULATED TORQUE ARMS Max Torque American S.I. EZ2R EZ2R EZ40R EZ00R lbft.ft.4 lbft.ft 29. lbft.ft 73.7 lbft.ft 2 N.m 2 N.m 40 N.m 00 N.m Height 32 /2" 3 /2" 40 /2" 40 /2" 0 /" 2" /2" 2 /2" /4" " 2 /3" 34" Min and Max Arm Reach at Inclination. 4 4 /2" 20" " 20 /2" 2 /" 29" 2 /" 33" 2 /3" " 2 7 /" /2" /" 2" " 29 /2" Balancer Capacity. 2. lbs lbs lbs lbs. NOTE! An additional balancer (202) can be added to the EZ40R & EZ00R model to increase balancer capacity. The additional balancer increases the dual balancer capacity to.3. for the EZ40R, and. 3.2 for the EZ00R. ACCESSORIES An inline driver clamp is included with the torque arm. Other clamp options are available and sold separately. Rotating Clamp Pistol Grip Clamp Angle Driver Clamp Nipple Clamp For : EZ2R Description Clamp Dia. Rotating Clamp Pistol Grip Clamp Angle Driver Clamp Nipple Clamp "." "." "." * * Nipple clamp includes /4" and /" hose exhaust mm. For s: EZ2R & 40R Clamp Dia. " 2" 200 " 2" 2003 " 2" For : EZ00R Clamp Dia. " 2" 200 EZGLIDER.
11 EZGlider Telescoping Torque Arms Driver not included. KEY FEATURES Crafted with lightweight durable carbon fiber the arm collapses like a telescope. Easytouse, requires little space and doesn t disrupt production flow. The effortless handling of the torque arm provides comfortable tool operation and increased production. Mountable and easy to install on a wall, workbench and a standard rail or trolley system. Maintenance free. Eliminates torque reaction of power tools. Can be used with a variety assembly tools like, electric & pneumatic screwdrivers, angle nutrunners, pulse tools, pistol style tools, grinders, impact wrenches, drills, sanders, and percussion tools. Long arm reach capability up to ft. Perfect for MVI applications. Universal Adapter included with EZ2T, T, 0T & 40T models. Torque capacity up to 47. lbf.ft (200 N.m). MOUNTING TO THE "STANDARD GLIDING RAIL SYSTEM" The Telescoping Torque Arms can be mounted to the Standard Gliding Rail System (sold separately) and can be used in a variety of positions. For a vertical position it is necessary to install one additional item, an interface bracket (sold separately). INTERFACE BRACKET Interface Bracket for EZT, 0T & 40T 200 for EZ200T 2002 Standard Gliding Rail System SLEEVE KIT (ACCESSORY) 200 Connect Standard Gliding Rail System together. Working Distance/ 40mm 0mm 0mm 00mm 30mm 0mm #2003 #2004 #200 #200 #2007 #200 EZGLIDER Mountz MC4 catalog Copyright 2009 all rights reserved
12 TOOL POSITIONING OPTIONS Besides the standard inline tool mounting position, the telescoping arm can be used with assembly tools in a variety of positions. For some tool positioning options, different tool clamp needs to be ordered separately. P P2 P3 P4 Standard Tool Balancer needs to be mounted above an inline tool. TELESCOPING TORQUE ARMS Max. Torque lbft.ft N.m EZ2T EZ2T/00 EZ2T/2000 EZT EZT/00 EZT/2000 EZT/ Clamp Dia.."."." 2" 2" 2" 2" Min Arm Reach." 2." 32.3".7" 2." 32.4" 39." Max Arm Reach 37" 9" 7.7" 37." 9" 7.7" 9.4" Weight of Arm.3 lbs. 2.7 lbs. 3.3 lbs.. lbs. 3.3 lbs. 4 lbs. 4.4 lbs. P Tool Postion Options P2 P3 No No No No No No, Order Clamp #204, Order Clamp #2044, Order Clamp #204, Order Clamp #2044, Order Clamp #204, Order Clamp #2044, Order Clamp #204, Order Clamp #2044 P4 No No No, Order Clamp #204, Order Clamp #204, Order Clamp #204, Order Clamp #204 HIGH TORQUE TELESCOPING ARMS Min Max Max. Torque Clamp Arm Arm Weight Tool Postion Options lbft.ft N.m Dia. Reach Reach of Arm P P2 P3 EZ0T/00 EZ0T/2000 EZ0T/200 EZ40T/00 EZ40T/2000 EZ40T/200 EZ200T/00 EZ200T/2000 EZ200T/ " 2" 2".2 2".2 2".2 2" * * * 2." 34." 4.3" 3." 4.4".2" 37.4" 47.2" 7." 9" 7.7" 9.4" 9" 7.7" 9.4" 9" 7.7" 9.4". lbs. 7. lbs. 7.7 lbs. 7.7 lbs..4 lbs.. lbs. 7.7 lbs..4 lbs.. lbs. * Customer must provide information (Brand & ) on each tool being used with the arm. The clamp is custom made to fit the tool being used. P4, Order Clamp #204, Order Clamp #204, Order Clamp #204, Order Clamp #204, Order Clamp #204, Order Clamp #204, Order Clamp #2049, Order Clamp #2049, Order Clamp #2049 BALANCING KIT FOR VERTICAL MOUNTING A balancing kit can be mounted on the side of any of telescoping arm. It allows the arm to be used with pistol grip tools and angle nutrunners (see tool position options above for using angle nutrunners with arms). E E2 E3 E Balancer Capacity lbs lbs lbs lbs. Stroke 3" 7.7" 7.7" 7.7" Example of E Balancer Kit being attached to a telescoping arm. NOTE! It is recommended to use a tool balancer with all EZGlider Telescoping Arm models. The telescoping arms should not be used at maximum arm reach on a permanent basis. ISO 900and ISO 702 Company EZGLIDER.0
13
14 MAGNETIZER / DEMAGNETIZER Magnetize or demagnetize bits and parts instantly. 20 Accessories Electric Torque Screwdrivers TOOL STAND A rugged adjustable tool support stand. Prevent tool damage due to dropping or mishandling. Convenient tool positioning adjust both vertically and horizontally. Electric tool cords can be tiewrapped to the vertical base to keep work station clean. 30 degree swivel. Four foot high, maximum arm length.7 feet. A balancer is recommended. : MT Pneumatic Center Block Fitted with a pretapped plumbing holes. For attaching air fittings or air hose on MT0 Tool Stand. 03 COIL AIR HOSE Dual swivel hose fittings provide 30º rotation. Durable polyurethane hose mm ID. Flexible, lightweight and good recoil memory. /4 NPT fitting. Burst pressure 42 PSI at 73º F Length m 0m COUPLER for Air Tool (Universal /4 female) FITTINGS for Air Tool /4" Female (Milton type) for Air Tool /4" Male (Milton type) 3003 BENCH CLAMP Used to clamp MT0 Tool Stand base to table tops. This handy unit eliminates hole drilling and secures the tool stand in place. It s flexible and ready to move at a moments notice. : REGULATOR NPT Port Size: /4" Filter Element: μ Max. Input Pressure: 0 PSI Max. Output Pressure: 7 ~ 40 PSI Max. Flow: 3. cfm Operating Temp. Range: 40 F ~ 40 F Drain Capacity: ml Oil Capacity: 2 ml Recommendable Lubricants: ISO VG32 MAGONETS Magnetize bits by sliding a MagONet onto the bit. Desc. for 3/" Shank Bit for mm Shank Bit for /4" Shank Bit Inner Dia. 3/" mm 7mm (actual size) Outer Dia. 7.mm 7.mm 9mm Package Quantity Use For most 0 & 00 bits Reduced Dia. Bits Standard Bits ISO 900and ISO 702 Company Accessories.2
15 Special Bits When ordering special extended bits, we need the specific information below to provide a quote. /4 Hex A/F inches /4 Hex A/F inches /4 Hex A/F inches L L2 L L2 L L2 HEX BITS or BLADES AMERICAN METRIC A/F L2 (max.) A/F.0" 3".mm /" 3 /4" 2mm /4" 3 /2" 2.mm 3/32" 3 3 /4" 3mm 7/4" 7" 3.mm /" 7 /2" 4mm 9/4" " mm /32" /2" mm 3/" 9 /4" mm /4" " /" 7" L Length of Shank H for /4" Hex (in inches) ORDERING SYSTEM A/F 2H HS HS for Hex Standard HM for Hex Metric L2 (max.) 3 /4" 4 3 /4" /2" 7 /4" 4 /2" /4" 9 /4" 0" 0 3 /4" L2 Length of Blade (in inches) BALL POINT BITS or BLADES AMERICAN METRIC A/F L2 (max.) A/F L2 (max.).0" /" /4" 3/32" 7/4" /" 9/4" /32" 3/" /4" /" 3" 3 /4" 3 /2" 3 3 /4" 7" 7 /2" " /2" 9 /4" " 7".mm 2mm 2.mm 3mm 3.mm 4mm mm mm mm 3 /4" 4 3 /4" /2" 7 /4" 4 /2" /4" 9 /4" 0" 0 3 /4" L Length of Shank H for /4" Hex (in inches) ORDERING SYSTEM A/F 2H /. BP BP for Ball Point L2 Length of Blade (in inches) SPLINE BITS or BLADES AMERICAN A/F L2 (max.) Flutes.04".00".09".072".07".09".0".4" 2.7" 2.7" 2.7" 2.7" 2.7" 2.7" 2.7" 4." 4 ORDERING SYSTEM L Length of Shank H for /4" Hex (in inches) A/F # of Flutes H SB SB for Spline Bit NOTE! Bits in excess of 4" long are subject to bowing. L2 Length of Blade (in inches) SPECIAL BITS Mountz MC4 catalog Copyright 2009 all rights reserved
16 Bit Holders For use with ALL Drivers SCREW CAP RETAINER (nonmagnetic) Length 2 7 /" 4" " Drive /4 Hex /4 Hex /4 Hex Diameter Body Nose 3/" 7/" 3/" 7/" 3/" 7/" SCREW CAP RETAINER (magnetic) Length 2 3 /" 2 7 /" 4" " " " Drive /4 Hex /4 Hex /4 Hex /4 Hex /4 Hex /4 Hex Diameter Body Nose 3/" 7/" 3/" 7/" 3/" 7/" 3/" 7/" 3/" 7/" 3/" 7/" CRING RETAINER (magnetic) Length 2 /" 2 7 /" 4" " " Drive /4 Hex /4 Hex /4 Hex /4 Hex /4 Hex Body Dia. 3/" 3/" 3/" 3/" 3/" /4" F/SQ. DR. to /4" F/HEX BIT HOLDER 4MM 2002 AUTOLOCK BIT HOLDER 0MM (NONMAGNETIC) 200 AUTOLOCK BIT HOLDER 0MM (MAGNETIC) 200 Nutsetters For use with ALL Drivers American Metric B A A /4" MAGNETIC Hex Size A 3/" 20 /4" 204 /4" 207 /4" 2037 /4" /" 20 /" 203 /" 20 3/" 2 3/" 202 3/" 22 7/" 2074 mm 207 mm mm 2070 mm mm Overall Length 2" /" 2 9 /" 4" " /" 2 9 /" 3" 7 /" 2 9 /" 3" 2 9 /" 2 9 /" /" /" /" 7 /" Socket Body Diameter B /" 7/" 7/" 7/" 7/" /2" /2" /2" 9/" 9/" 9/" /" /4" /4" 7/" /2" 9/" American Metric NONMAGNETIC Hex Size A Overall Length 3/" 3/" /4" /4" /4" /" /" /" /" /" /" /32" /32" 3/" 3/" 3/" 7/" 7/" 7/" /2" /2" 4mm mm " 3" /" 2 9 /" 3" /" 2 9 /" 2" 3" 4" " 2" 3" 7 /" 2" 2 9 /" 2" 3" " 2" 3" 2 9 /" 2 9 /" Socket Body Diameter B /" /" 7/" 7/" 7/" /2" /2" /2" /2" /2" /2" 9/" 9/" 9/" 9/" 9/" 2/32" 2/32" 2/32" 3/4" 3/4" /32" /32" Bit Holders & Nut Setters.4
17 Power Bits For use with ALL Drivers TORXALIGN WEDGE A Overall Length /" B POZIDRIVE Drive /" OL Size PQ* OPZD PZD 2PZD 3PZD A" (Dia.) 2 3 /4" OL 3" OL 3 /2" OL PQ* PQ* PQ* *OL = Overall Length *PQ = Package Quantity " OL PQ* A" / 3/ /4 /4 Drive Size T T7 T T9 T0 T T20 T2 T27 T A" Package B" Quantity BALLPOINT (hex) Overall Length 3"/ 7mm TORX B A" (Dia.) American Metric Hex Size /4" 3/32" 7/4" /" 9/4" /32" 3/" 7/32" /4" /" 3/" /2" 2mm 2.mm 3mm 4mm mm mm mm 0mm 2mm Cap Screw Size /4 / 3/ 7/, /2 / M2. M3 M4 M M M M0 M2 M4 Set Screw Size 0 /4 / 3/ 7/ /2 / 3/4 7/ M4 M M M M0 M2 M M / M20 M / M24 Package Quantity Drive Size T T2 T3 T4 T T T7 T T9 T0 T T20 T2 T27 T T40 /" OL 2 3 /4" OL 3 /2" OL " OL PQ* PQ* PQ* PQ* *OL = Overall Length *PQ = Package Quantity A" B" POWER BITS Mountz MC4 catalog Copyright 2009 all rights reserved
18 TORXSET Overall Length /4" SLOTTED B" (approx. blade thickness) A" (Dia.) Screw Size TS2 TS4 TS Package Quantity Screw Size F2R 2F3R 3F4R 4FR FR F7R F0R 0F2R 2F4R /" OL Item# PQ* /4" OL 3" OL PQ* PQ* *OL = Overall Length 3 /2" OL 4" OL " OL PQ* PQ* PQ* *PQ = Package Quantity A" B" PHILLIPS A" (Dia.) SOCKET HEAD (allen type) Overall Length /"/ 49mm Point /" OL Size Item# PQ* O Point Size O 2 3 Screw Size /4" OL 3" OL 3 /2" OL 4" OL PQ* PQ* PQ* PQ* *OL = Overall Length *PQ = Package Quantity Flat Oval Binding Machine Screws Round Fillster TrussBrazier Button " OL PQ* A" / 3/ /4 /4 American Metric Hex Size /" 20 /4" 20 3/32" 207 7/4" 202 /" 209 9/4" 2070 /32" 207 3/" 2072 /4" 2074 /" 290.mm mm mm mm mm 204 mm 204 mm 2034 mm 2049 Cap Screw Size /4 / / M. / M2 M2.3 / M2. / M2. M3 M4 M M M M0 Set Screw Size 0 /4 / 3/ /2 / M3 M4 M M M M0 M2 M Package Quantity ISO 900and ISO 702 Company POWER BITS.
19
20 InLine Pulse Tools Auto ShutOff & Non ShutOff KEY FEATURES Various models that range from 47 N.m Designed to enhance cycle time with highspeed rundown. Excellent powertoweight ratio. Safe ergonomic selection low noise decibels, minimal vibration & reaction free operation. Comfortable rubberized nonslip grips for easy handling and excellent thermal ergonomics. Specially designed pulse fluid extends life between oil changes provides better stability. Double sealing increases performance reduces maintenance. Shutoff and non shutoff models. Ergonomically safer than harmful hammering and vibration of impact wrenches. Widest ranged pulse tool on market for easy tool specification. NOTE! Sleeve drive sockets should be used with impact or pulse tools that accept an extended shaft sleeve type socket. Sleeve drive sockets provide more stability and prevent wobble and distortion. Contact Mountz for a sample or demonstration so you can see and feel the difference of a sleeve drive socket. All specified torque ranges were established statically on a Mountz (TorqueLab LTT Series) torque meter at a dynamic air pressure of 70 and PSI (LBS per Square Inch). The specified results should be used as guidance only in tool selection. In general, the torque range will be lower based on type of joint, air pressure, extension bars and/or extended sockets. A pulse tool is a discontinuous tool and added adapters or extensions create a dampening effect, thus lowering torque values. Tool selection as well as set up is recommended to be validated on the actual joint by use of a suitable calibrated torque wrench. We recommend a quality Mountz Digital torque wrench. AUTO SHUTOFF FLEXSSX 30 FLEXS40SX 30 FLEXS40S 3024 FLEXS0SX 302 FLEXS0S 302 FLEXS0SX 3027 FLEXS0S 302 FLEXS70S 3029 NON SHUTOFF FLEXSX 30 FLEX40SX 303 FLEX40S 3032 FLEX0SX 3033 FLEX0S 3034 FLEX0SX 303 FLEX0S 303 FLEX70S 3037 Drive Type /4" F/Hex /4" F/Hex 3/" Sq Dr /4" F/Hex 3/" Sq Dr /4" F/Hex 3/" Sq Dr 3/" Sq Dr Torque (N.m) psi Min. Max Torque (N.m) psi Min. Max Free Speed (RPM) kg/cm2 psi AUTO SHUTOFF FLEXSSX FLEXS40SX FLEXS40S FLEXS0SX FLEXS0S FLEXS0SX FLEXS0S FLEXS70S NON SHUTOFF FLEXSX FLEX40SX FLEX40S FLEX0SX FLEX0S FLEX0SX FLEX0S FLEX70S Weight lbs. Kgs P/W Ratio Nm/Kgs Length in Noise Level dba Average Air Consumption m 3 /min. ft 3 /min. CFM CFM Hose Size mm..... InLine Pulse Mountz MC4 catalog Copyright 200 all rights reserved
21 Pistol Pulse Tools Auto ShutOff & Non ShutOff KEY FEATURES Various models that range from 4 N.m Designed to enhance cycle time with highspeed rundown. Excellent powertoweight ratio. Safe ergonomic selection low noise decibels, minimal vibration & reaction free operation. Comfortable rubberized nonslip grips for easy handling and excellent thermal ergonomics. Specially designed pulse fluid extends life between oil changes provides better stability. Double sealing increases performance reduces maintenance. Shutoff and non shutoff models. Ergonomically safer than harmful hammering and vibration of impact wrenches. AUTO SHUTOFF FLEXSPX 3000 FLEXS40PX 300 FLEXS40P 3002 FLEXS0PX 3003 FLEXS0P 3004 FLEXS0PX 300 FLEXS0P 300 FLEXS70P 3007 FLEXS90P 300 FLEXS00P 3009 FLEXSP 300 AUTO SHUTOFF FLEXSPX FLEXS40PX FLEXS40P FLEXS0PX FLEXS0P FLEXS0PX FLEXS0P FLEXS70P FLEXS90P FLEXS00P FLEXSP Pistol Pulse NON SHUTOFF FLEXPX FLEX40PX FLEX40P FLEX0PX FLEX0P FLEX0PX FLEX0P FLEX70P FLEX90P FLEX00P FLEXP NON SHUTOFF FLEXPX 30 FLEX40PX 302 FLEX40P 303 FLEX0PX 304 FLEX0P 30 FLEX0PX 30 FLEX0P 307 FLEX70P 30 FLEX90P 309 FLEX00P 3020 FLEXP 302 Weight lbs. Kgs P/W Ratio Nm/Kgs Drive Type /4" F/Hex /4" F/Hex 3/" Sq Dr /4" F/Hex 3/" Sq Dr /4" F/Hex 3/" Sq Dr 3/" Sq Dr /2" Sq Dr /2" Sq Dr /2" Sq Dr Length in Noise Level dba Torque (N.m) psi Min. Max Average Air Consumption m 3 /min. CFM ft 3 /min. CFM Hose Size mm..... Torque (N.m) psi Min. Max Mountz MC4 catalog Copyright Free Speed (RPM) kg/cm2 psi NOTE! Sleeve drive sockets should be used with impact or pulse tools that accept an extended shaft sleeve type socket. Sleeve drive sockets provide more stability and prevent wobble and distortion. Contact Mountz for a sample or demonstration so you can see and feel the difference of a sleeve drive socket. All specified torque ranges were established statically on a Mountz (TorqueLab LTT Series) torque meter at a dynamic air pressure of 70 and PSI (LBS per Square Inch). The specified results should be used as guidance only in tool selection. In general, the torque range will be lower based on type of joint, air pressure, extension bars and/or extended sockets. A pulse tool is a discontinuous tool and added adapters or extensions create a dampening effect, thus lowering torque values. Tool selection as well as set up is recommended to be validated on the actual joint by use of a suitable calibrated torque wrench. We recommend a quality Mountz Digital torque wrench. 200 all rights reserved
22 RightAngle Pulse Tools Auto ShutOff & Non ShutOff KEY FEATURES Various models that range from. 0 N.m Designed to enhance cycle time with highspeed rundown. Excellent powertoweight ratio. Safe ergonomic selection low noise decibels, minimal vibration & reaction free operation. Comfortable rubberized nonslip grips for easy handling and excellent thermal ergonomics. Specially designed pulse fluid extends life between oil changes provides better stability. Double sealing increases performance reduces maintenance. Shutoff and non shutoff models. Ergonomically safer than harmful hammering and vibration of impact wrenches. NOTE! Right Angle Pulse tools should use Standard Impact Sockets. All specified torque ranges were established statically on a Mountz (TorqueLab LTT Series) torque meter at a dynamic air pressure of 70 and PSI (LBS per Square Inch). The specified results should be used as guidance only in tool selection. In general, the torque range will be lower based on type of joint, air pressure, extension bars and/or extended sockets. A pulse tool is a discontinuous tool and added adapters or extensions create a dampening effect, thus lowering torque values. Tool selection as well as set up is recommended to be validated on the actual joint by use of a suitable calibrated torque wrench. We recommend a quality Mountz Digital torque wrench. AUTO SHUTOFF FLEXS0RX 304 FLEXS0R 303 FLEXS0RX 304 FLEXS0R 3039 FLEXS70RX 3047 FLEXS70R 3040 FLEXS70RH 3044 NON SHUTOFF FLEX0RX 304 FLEX0R 304 FLEX0RX 3049 FLEX0R 3042 FLEX70RX 300 FLEX70R 30 FLEX70RH 30 Drive Type /4" F/Hex 3/" Sq Dr /4" F/Hex 3/" Sq Dr /4" F/Hex 3/" Sq Dr /2" Sq Dr Torque (N.m) psi Min. Max Torque (N.m) psi Min. Max Free Speed (RPM) kg/cm2 psi AUTO SHUTOFF FLEXS0RX FLEXS0R FLEXS0RX FLEXS0R FLEXS70RX FLEXS70R FLEXS70RH NON SHUTOFF FLEX0RX FLEX0R FLEX0RX FLEX0R FLEX70RX FLEX70R FLEX70RH Weight lbs. Kgs P/W Ratio Nm/Kgs Length in Noise Level dba Average Air Consumption m 3 /min. ft 3 /min. CFM CFM Hose Size mm.. RightAngle Pulse Mountz MC4 catalog Copyright 200 all rights reserved
23 Sleeve Drive Impact Sockets Impact & Pulse Tools KEY FEATURES Sleeve drive sockets provide stability and prevent wobble and distortion. Less vibration reduces wear on the critical components of the pulse tool. Sleeve drive sockets should be used with an impact or pulse tool that accepts extended shaft sleeve type sockets. 3/" Sq. Dr. ( Point Sockets) AMERICAN D2 D L2 Size mm mm mm /4" /" 3/" 7/" /2" 9/" /" /" 3/4" 3/" 7/" /" " /" /" Sq. Dr. ( Point Sockets) METRIC D2 D L2 Size mm mm mm Sleeve Drive Impact Sockets L mm L mm /2" Sq. Dr. ( Point Sockets) AMERICAN D2 D L2 Size mm mm mm /4" /" 3/" 7/" /2" 9/" /" /" 3/4" 3/" 7/" /" " /" /" 3/" /4" /" 3/" 7/" /2" L mm NOTE! Sleeve sockets also available in extended lengths with and without magnet, hex bit, Torx, External Torx, stud setter and quick release chuck types. Please inquire for sizes and availability. Point Socket Extension Bar /2" Sq. Dr. ( Point Sockets) METRIC D2 D L2 Size mm mm mm Extension Bars Input Drive Output Drive 3/" 3/" 3/" /2" /2" /2" /" 3/" 3/" /2" /2" /2" Mountz MC4 catalog Copyright D2 mm L mm L mm Male End Type Pin Hole Pin Hole Pin Hole Pin Hole Pin Hole Pin Hole 200 all rights reserved
24 Pulse Tool Reference Guide PULSE TOOL SELECTION REFERENCE GUIDE BOLT SIZE AUTO SHUTOFF FLEXS40P FLEXS0P FLEXS0P FLEXS70P FLEXS90P FLEXS00P FLEXSP FLEXSPX FLEXS40PX FLEXS0PX FLEXS0PX FLEXS40S FLEXS0S FLEXS0S FLEXS70S FLEXSSX FLEXS40SX FLEXS0SX FLEXS0SX FLEXS0R FLEXS0R FLEXS70R FLEXS70RH FLEXS0RX FLEXS0RX FLEXS70RX NON SHUTOFF M M M M0 M2 M4 FLEX40P FLEX0P FLEX0P FLEX70P FLEX90P FLEX00P FLEXP FLEXPX FLEX40PX FLEX0PX FLEX0PX FLEX40S FLEX0S FLEX0S FLEX70S FLEXSX FLEX40SX FLEX0SX FLEX0SX FLEX0R FLEX0R FLEX70R FLEX70RH FLEX0RX FLEX0RX FLEX70RX 0NM 9NM 3NM 27NM 20NM 3NM 34NM 7NM 7NM 90NM 7NM 20NM 3NM 4NM NM 2.NM 9NM NM 2NM 2NM NM NM 0NM 9NM 3NM 27NM 20NM 3NM 34NM 7NM NM 2.NM 9NM NM 2NM 2NM NM NM 9.NM 7NM 4NM 24NM 20NM 3NM 40NM 0NM.NM NM 2NM NM 40NM 0NM HARD JOINT APPLICATIONS The auto shutoff pulse tools normally reach % of the maximum torque listed in the torque range. The non shutoff pulse tools normally reach 9% of the maximum torque listed in the torque range. SOFT JOINT APPLICATIONS The auto shutoff pulse tools normally reach 70% of the maximum torque listed in the torque range. The non shutoff pulse tools normally reach 90% of the maximum torque listed in the torque range. USE THE PROPER PRESSURE 70 PSI PSI ACCESSORIES SELECTION NOTES All specified torque ranges were established statically on a Mountz (TorqueLab LTT Series) torque meter at a dynamic air pressure of 70 and PSI (LBS per Square Inch). The specified results should be used as guidance only in tool in tool selection. In general, the torque range will be lower based on type of joint, air pressure, extension bars and/or extended sockets. A pulse tool is a discontinuous tool and added adapters or extensions create a dampening effect, thus lowering torque values. Tool selection as well as set up is recommended to be validated on the actual joint by use of a suitable calibrated torque wrench. We recommend a quality Mountz Digital torque wrench. Sleeve Drive Impact Sockets (except for Right Angle models) See Page.2 CALIBRATION METHOD RECOMMENDED The range vary according to joint specification. Recommended use static torque tester LTT or PTT with BMX and measure the residual torque with a Mountz Digital Torque Wrench to validate the calibration procedure. ISO 900and ISO 702 Company Pulse Tool Reference Guide.
25 Ask a Mountz customer service representative for a copy of our otrher Catalogs. ASSEMBLY POWER TOOL CATALOG MC4 Available in Print or PDF format, 7 page CORPORATE HEADQUARTERS 00 North th Street San Jose CA 92 t t f sales@etorque.com DISTRIBUTION & SERVICE CENTER 90 Underwood Road Foley AL 33 t f TORQUE ANALYZER & TEST MEASUREMENT CATALOG MC4 Available in Print or PDF format, 24 page US & CANADA SALES OFFICES Anaheim, Boston, Charlotte, Chicago, Cleveland, Dallas, El Paso, Los Angeles, Minneapolis, Nashville, Phoenix, Seattle, San Jose, Toronto MOUNTZ MEXICO SA de CV MAIN OFFICE & SERVICE CENTER Av. Cristobal Colon #3 Col. Paseos de Chihuahua Chihuahua, Chih. Mexico CP 32 t f MEXICO SALES OFFICES Tijuana, Cd. Juarez, Chihuaha, Reynosa, Monterrey, Mexico DF, Guadalajara TORQUE MULTIPLIER CATALOG MC4 Available in PDF format only, 24 page Mountz MC4 catalog Copyright 2009 all rights reserved
Inverted Telescoping Arms Operation Instructions
Inverted Telescoping Arms Operation Instructions Rev 1.1 (4/26/17) Page 1 Introduction The Telescoping arm provides the operator full flexibility on the assembly line. Crafted with lightweight durable
More informationEZ-Glider Linear Torque Arms Operation Instructions
EZ-Glider Linear Torque Arms Operation Instructions Rev 3.6 (4/26/17) Page 1 Introduction Prevents cross threading and side load. Keeps tool perpendicular. Reduces RMI (Repetitive Motion Injury) and CTS
More informationNF-Series Operation Instructions
NF-Series Operation Instructions Rev 2 1.20.11 Page 1 Introduction Various models that range from 2.6-39 lbf.in High performance brushless motor design provides durability and reduces the standard maintenance
More informationNF-Series Operation Instructions
NF-Series Operation Instructions Rev 2.3 (4/26/17) for V3 Models Only Page 1 Introduction - Various models that range from 2.6-39 lbf.in - High performance brushless motor design provides durability and
More informationBF-Series (Mini Electric Screwdrivers BF035 & BF045) Operation Instructions
BF-Series (Mini Electric Screwdrivers BF035 & BF045) Operation Instructions Rev 1 8.30.10 Page 1 Introduction - Various models that range from 0.17-3.9 lbf.in - High performance brushless motor design
More informationEZ-12T & EZ-30T Telescoping Arms Operation Instructions
EZ-12T & EZ-30T Telescoping Arms Operation Instructions Rev 3.1 (11/21/2014) Page 1 Introduction The Telescoping arm provides the operator full flexibility on the assembly line. Crafted with lightweight
More informationHigh Torque Telescoping Arms Operation Instructions
High Torque Telescoping Arms Operation Instructions Page 1 Introduction The Telescoping arm provides the operator full flexibility on the assembly line. Crafted with lightweight durable carbon fiber the
More informationQA4 / QA6 / QA8 Series Precision Air Nutrunners
QA4 / QA6 / QA8 Series Precision Air Nutrunners Because every assembly is critical There s much more to an assembly application than merely putting wrench to bolt. It s an intricate matter of linking tool
More informationMaking a Safer World Through Accuracy and Precision. Product Bulletin
Making a Safer World Through Accuracy and Precision Product Bulletin Follow us on Twitter @mountztorque PB # 0058 October 2014 www.mountztorque.com HD-Series Torque & Automation Control System The Mountz
More informationCapture Torque Analyzer Operation Instructions Rev 1.0 (6/30/2014)
Page 1 Features - Enables calibration and analysis of hand and power torque tools. - Selection of three operation modes: Track, Peak & First Peak - Seven units of torque measurements: (ozf.in, lbf.in,
More informationHow to select your fastening screwdrivers?
Fastening Pistol shape for horizontal applications or for better controllability Straight shape for vertical applications How to select your fastening screwdrivers? Clutch Type IMPACT (rocking dog) Good
More informationTorque Controlled Screwdrivers
Torque Controlled Screwdrivers (877) 273-3903 www.eagle-premier.com 1 Pneumatic Torque Controlled ScrewDrivers Simple Torque Adjustment with Covered Access Inline Push to Start or Pistol Trigger Activated
More informationRecoil Hose. Polyurethane. Recoil Hose. Hytrel Recoil Hose BENEFITS SPECIFICATIONS ORDERING INFORMATION BENEFITS SPECIFICATIONS ORDERING INFORMATION
Polyurethane Recoil Hose Greater durability than Nylon or Hytrel recoil hoses due to exceptional wear characteristics Longer life expectancy due to kink resistant properties Superior recoil memory due
More informationSpecial Applications Require Special Tools
Index Routers.................. 102-103 Tappers..................... 104 Clinch Nut Tools.............. 106 Rivet Shavers................ 107 Skin Clamp Runners........... 108 Saws................... 109-110
More information7254P. Aver. Air Consumption (cfm) Air Pressure (psi)
Screwdrivers 1/4 Direct Drive Screwdrivers Composite Housing Screwdrivers Quick change bit holder. Top mount reverse valve - Easy to switch direction - One hand. Low Noise 72-76 dba Powerful 7 Vane Motor
More informationINSTRUCTION MANUAL. MODEL No: FLEXC-3PX FLEXC-8PX FLEXC-11PX FLEXC-12PX 10.8V Cordless Shut-off Screwdriver.
a) Torque adjustment cover b) 1/4" F/Hex with quick change chuck c) LED indicator provides simple process information to the operator d) LED light for working in dark area e) Press button for easy Forward/Reverse
More informationIntroduction to Torque Calibration
Introduction to Torque Calibration Calibrate THE IMPORTANCE OF TORQUE CALIBRATION Regular Torque Tool calibration guarantees repeated accuracy and adherence to International Standards. Calibration also
More informationAIR DRILL, AIR ANGLE GRINDER and AIR DIE GRINDER
AIR DRILL, AIR ANGLE GRINDER and AIR DIE GRINDER AIR DRILL KW0800256 3/8 Chuck, Reverse Equipped with precision chucks for excellent accuracy Precision bearing provides longer tool durability KW0800258
More informationFastener Drive & Screwdriving
www.irwin.com Fastener & Screwdriving tools Manufactured for Strength and value industry-specific Screwdriver Bits Fastener heads are often designed for the particular needs of specific applications and
More informationOperation & Replacement Parts Manual
ERGO-ARM II Operation & Replacement Parts Manual AEA-1212-A Pneumatic AEA-1212-M Mechanical A SUBSIDIARY OF AIMCO D.C Nutrunners Torque Measurement & Audit Equipment Articulating Arms Assembly Systems
More informationDial Wrench Operating Instructions Rev 2.6 (4/10/17)
Operating Dial Torque Wrenches 1. Fit appropriate socket or attachment. 2. Move Slave Pointer to zero. For that are fitted with a signal light, set the Slave Pointer to required torque load. 3. Apply a
More informationFeatures and Specifications for Impact Wrenches
Pneumatic Air Tools Version 2017 Revised 06/2017 Email your order to: sales@polyconn.com or fax to (763) 398-2590. www.polyconn.com. Questions call: (763)559-0388 3062 Ranchview Lane North. Plymouth, MN
More informationScout II Operation Instructions
Scout II Operation Instructions Scout Interface Layout Pg 2 Connecting the Scout 1. The Scout can be powered by a STC30 Plus, STC40, ET-30D, FT-30D, YFC-35D or via external power, 24VDC, 1A.2) If no transformer,
More informationMT07 MT03 MHS100AG MEASURING TAPE & HACKSAW MEASURING TAPE & HACKSAW MEASURING TAPES MEASURING TAPES HEAVY DUTY DELUXE TYPE HACKSAW W/12" H.S.S.
MEASURING TAPE & HACKSAW MEASURING TAPE & HACKSAW MT07 ITEM NO. MT03 MEASURING TAPES HIGH IMPACT ABS CASE W/ RUBBER PROTECTED RUBBER COVERED CASE, COMFORTABLE SIZE MEASURING TAPES INNER PC/BOX PACKING
More informationIndustrial. Ready when you are. RediPower. Tools
RediPower Industrial Tools Ready when you are RediPower Ready when you are Available, cost effective, and durable are recognized attributes of the RediPower products. Since their introduction in the mid
More informationTSN (Cam-Over Wrench) Operating Instructions Rev 2.2 (4/13/2017)
TSN Cam-Over Torque Wrenches The TSN is a preset torque wrench that's ideal for maintenance and production applications where over-torque conditions are not tolerated. The use of cam-over wrenches takes
More informationAdvanced Force / Torque Indicator
32-1128 Advanced Force / Torque Indicator The 5i advanced digital force / torque indicator is designed to work with a wide range of Mark-10 remote force and torque sensors (see page 3). With exclusive
More informationPRECISION CORDLESS TOOLS FOR USE IN ASSEMBLY PRODUCTION
PRECISION CORDESS TOOS FOR USE IN ASSEMBY PRODUCTION ACHIEVING ASSEMBY EXCEENCE TA B E O F C O N T E N T S AIMCO Signature Series 3 Pistol Grip Tools 4 Right Angle Tools 5 Angle Attachments 6 Auditor Torque
More informationMighty Seven Pneumatic Air Tools and Accessories 2018 New Tools Complete Air Tool Solutions
Mighty Seven Pneumatic Tools and Accessories 2018 New Tools Complete Tool Solutions NC 4612B 1/2 Dr. Impact Wrench Square Drive Bolt Capacity Max. Torque Pressure Net Weight Hose Overall Length 1/2 5/8
More informationWRENCHES TORQUE. Motorq Professional Torque Wrenches
WRENCHES Motorq Professional Torque Wrenches The Motorq professional range of torque wrenches offer accuracy, comfort and ease of use. The push-through ratchet has been designed for strength with 24 or
More informationA c h i e v i n g A s s e m b l y E x c e l l e n c e
A c h i e v i n g A s s e m b l y E x c e l l e n c e AIMCO For over 40 years AIMCO has been working with manufacturers around the world, we are the complete global source for all assembly, fastening,
More informationImpact & Ratchet Wrenches
Impact & Ratchet Wrenches n i act wrenc deli ers a series o rotar lows to a fastener, producing torque. The advantage of impact wrenches is the high power-to-weight ratio, fast rundown, and limited torque
More informationThis section covers the comprehensive range of Torque Calibration equipment manufactured by Gedore Torque.
Torque Calibration Introduction This section covers the comprehensive range of Torque Calibration equipment manufactured by Gedore Torque. Torque calibration equipment is used for the testing, calibration
More informationTABLE OF CONTENTS. Auto Shut-Off 12V Electric Screwdrivers Nm ( in-lbs)
TABLE OF CONTENTS 3 4 6 Auto Shut-Off 12V Electric Screwdrivers.1.34 Nm (.7 3.8 in-lbs) Auto Shut-Off 32V Electric Screwdrivers.2 2.94 Nm (.2 26. in-lbs) 7 Slow Start & I/O Control Modules 8 Counting Controllers
More informationSTEERING AND SUSPENSION section 2
STEERING AND SUSPENSION section TRRT-PC piece Track Rod Removal Tool Kit Quality, kit designed for easy removal and installation of ball joints on track rods. Knurled handle provides extra grip and three
More informationEZ Tool Articulating Arm
EZ Tool Articulating Arm EZ tool arm features: Covers a 610 x 762 mm (24 x 30 inch) horizontal rectangular work envelope. Two piece arm with overall length from 864 to 1067 mm (34 to 42 inches). Anodized
More informationLIGHTER FASTER STRONGER
PRECISION BOLTING FOR OVER 20 YEARS LIGHTER FASTER STRONGER METRIC PRODUCT CATALOGUE RAD TORQUE SYSTEMS DB-RAD BATTERY SERIES RAD SINGLE SPEED RAD TV SERIES Precision Bolting for 4 RAD TORQ TABLE OF CONTENT
More informationSpring Special. 1 October - 30 November 2012 GLFS0012 R R GLFS0008. Micro - Tec
Spring Special *All Prices Incl VAT* E&OE 1 October - 30 November 2012 MSS9600 61pc Tool Set R2 502.00 1/2 Socket Sizes (12 Point): 8 10 11 12 13 14 15 16 17 18 19 20 21 22 24 27 30 32 1/2 Reversible Ratchet
More informationCaM PAIG n. special offer autumn High-performance products. Designed for you!
CaM PAIG n special offer autumn 2017 High-performance products. Designed for you! Impact wrenches Versatile tool ideal for all general repairs and maintenance applications 271 Nm of maximum torque in reverse
More informationTABLE OF CONTENTS. Right Angle - 32V Lever Start Drivers NM IN.LBS. Slow Start Control Module: KL-SSBN
TABLE OF CONTENTS 3-4 Auto Shut-off 32V Electric Screwdrivers & Accessories 0.02-2.94 NM --- 0.2-26 IN.LBS 5 Right Angle - 32V Lever Start Drivers 0.11-2.06 NM --- 0.9-18.2 IN.LBS 6 Slow Start Control
More informationSPECIAL OFFER SPRING Valid to Industrial. People. Passion. Performance. Tools
SPECIAL OFFER SPRING 2014 Valid to 20140630 Industrial Tools People. Passion. Performance. CP8252-R 2300:- 2500:- 13000:- 25000:- 38000:- 1/2 impact wrench Twin hammer clutch Composite body and aluminum
More informationScrewdrivers. Choosing the right Screwdriver. Tool selection
RediPower Choosing the right Screwdriver Tool selection Type of fastener/component Joint integrity Torque required Tool orientation and ergonomics Productivity POSSIBLE USE OF SCREWS TYPE OF CLUTCH START
More informationErgonomic design for comfort. Reduced vibration. Twin hammer impact mechanism. Part No. Maximum Torque Free Speed Weight Ave Air Consumption
3/8 Impact wrench The smallest in PCL s range of Prestige Impact Wrenches. The 3/8 Impact Wrench is designed for professional heavy duty use, with an ergonomically designed soft grip handle and a lightweight
More informationCastle Model TSM-21 Standard Screw Pocket Machine
Castle Model TSM-21 Standard Screw Pocket Machine "For Models with Serial Number 62481 and Above" Items Included with Machine Part No. Description Qty B00964 Castle 9/64 Cobalt Drill Bit w 1/4" Shank 1
More informationTorque Wrenches
- 171 - Digital Torque Wrenches Digital Torque Wrenches The new AmPro digital torque wrenches are designed for simple and precise measurement of industrial, automotive, aerospace and many other applications.
More informationHigh-performance products. Designed for you!
High-performance products. Designed for you! Impact Wrenches CP6748EX-P11R ATEX Art nr 6151590570 CP6768EX-P18D ATEX Art nr 6151590580 CP6778EX-P18D ATEX Art nr 6151590590 Dust-proof (IP6) and ATEX certified
More informationPistol Grease Guns. AC475 comes complete with 4" steel extension and 4-jaw coupler with ball check AC476 comes complete with 18" flexible
Lubricating Mini Pistol Grease Guns Deluxe Single-hand-operated pistol grip Die cast grease gun head with dual discharge ports for use with steel extension as well as flexible hose Develops 3500 PSI Capacity:
More informationCleco 19 & 8 Series Clecomatic Screwdrivers
Screwdrivers A tradition of quality is built into every screwdriver. Cleco screwdrivers have long been recognized as the assembly tool standard against which all other brands are measured. With over 100
More informationIndustrial Air Impact Wrenches
Distributed by Toll Free 1 800 563 1293 Industrial Air Impact Wrenches CWC S E R I E S THE ULTIMATE BALANCE OF PERFORMANCE, ERGONOMICS, AND DURABILITY. CWC Series combines powerful performance, rock-solid
More informationAuto Feed Drills & Tappers. Comprehensive range Single spindle operations Multi-spindle processes. More Than Productivity
Auto Feed Drills & Tappers Comprehensive range Single spindle operations Multi-spindle processes More Than Productivity AFD Applications Ease of Integration into Machine or Process Extensive range of mounting
More informationSIOUX TOOLS FORCE PRODUCT CATALOG ASSEMBLY
SIOUX TOOLS FORCE PRODUCT CATALOG ASSEMBLY ASSEMBLY Ratchet Wrenches....................... 3/8" (10 mm) Impact Wrenches......... 14 es......... 15 3/4" (19 mm) Impact Wrenches............ 1" (25 mm) Impact
More informationTools. Rocking dog: (Pinless or double): Good on very soft joints providing high speed rundown.
ol Bolting See the unique CP7759Q page 20 remium To Tool P T Impact Wrenches An impact wrench delivers a series of rotary blows to a fastener, producing torque. The advantages of impact wrenches are the
More informationAIMCO is an experienced leader in Assembly Tool Technology. Let us put our state-of-the-art products to work for you!
TORQUE MEASUREMENT SYSTEMS A BOUT AIMCO AIMCO is an experienced leader in Assembly Tool Technology. Founded in 1970, AIMCO has built an international reputation for providing the highest quality products,
More informationScrewdrivers. A tradition of quality is built into every screwdriver. 60 MONTH WARRANTY Cleco 14 & 8 Series Clecomatic Screwdrivers.
Screwdrivers A tradition of quality is built into every screwdriver. Cleco screwdrivers have long been recognized as the assembly tool standard against which all other brands are measured. With over 100
More informationInserting Tools for Screwdrivers
Screwdriving Technology Automation Air Motors Air Tools Inserting Tools for Screwdrivers nbits nsockets nfinders nbit holders With the longest lifetime and highest wear resistance combined with the best
More informationSIOUX TOOLS FORCE PRODUCT CATALOG DRILLS
SIOUX TOOLS FORCE PRODUCT CATALOG DRILLS Drills Index Pistol Grip................................... 9 Inline................................... 9-10 Right Angle................................ 10 Drill
More informationPneumatic Torque Motors
Pneumatic Torque Motors Contents and Torque Motor Selection Contents Torque Motor Selection... page 2 Torque Controlled Shut Off... page 4 SC Series... page 4 SD Series... page 6 F Series... page 8 Accessories...
More informationSTANDARD FASTENER TOOLS
STANDARD FASTENER TOOS STANDARD FASTENER TOOS Connect your tool to the application with Bits, Sockets and Nutsetters from AIMCO. AIMCO has assembled the most complete package of commonly used screwdriver
More informationAIR DRILL, AIR ANGLE GRINDER and AIR DIE GRINDER
AIR DRILL, AIR ANGLE GRINDER and AIR DIE GRINDER AIR DRILL KW0800256 3/8 Chuck, Reverse Equipped with precision chucks for excellent accuracy Precision bearing provides longer tool durability KW0800258
More informationPneumatic tools and accessories. For trades and businesses.
Competence from passion. Pneumatic tools and accessories. For trades and businesses. Pneumatic tools Lightweight, stable construction and proven durability: effective tools for maximum productivity. Impact
More informationTOOL ACCESSORIES 152
152 TOOL ACCESSORIES Introduction Torque arms Protect your most valuable resource Operator health is important. If your operators work with hand-held electric or pneumatic tools, the last thing you want
More informationPOWER TOOL SOLUTIONS CALL TODAY TOLL FREE: Abrasive Tools
CATALOG 2018 www.eagle-group.com Abrasive Tools Impact Wrenches Drills TM POWER TOOL SOLUTIONS Eagle Group is a leading supplier of power tools for industrial markets. Whether you need tools for material
More informationRAILWAY TORQUE WRENCH LDB-10 THE UNIVERSAL GENIUS. formerly
RAILWAY TORQUE WRENCH LDB-10 THE UNIVERSAL GENIUS formerly RAILWAY TORQUE WRENCH LDB THE CHALLENGE Railway track construction has always been extremely hard work. Heavy-duty, fuel-powered wrenches had
More informationTorque Tools. Torque Tools. Series Series Torque-indicators 300. Series Series Series Insert Tools 309
290 07 Torque Tools Series 7400 294 Series Torque-indicators 300 Torque Tools Series 7100 304 Series 7000 306 Series Insert Tools 309 291 Have you ever over or under tightened screws? Wera torque tools
More informationCarbon Fiber Air Shafts. Custom Carbon Fiber Tubes
Carbon Fiber Air Shafts Lightweight composite air shafts... with custom performance by design. NimCor offers an outstanding line of precision engineered carbon fiber shafts with unique performance features.
More informationArms and Fixtures. Application Manual SE Pine St., Portland, OR
Arms and Fixtures Application Manual 10000 SE Pine St., Portland, OR 97216 503-254-6600 800-852-1368 www.aimco-global.com Table of Contents 1 Articulating Torque Arm... 1 1.2 Remote start... 3 2 Carbon
More information2100:- POWERFUL & LIGHTWEIGHT
POWERFUL & LIGHTWEIGHT 2100:- CP7749 1/2 Art nr 8941077491 Max torque (rev): 1,300 Nm Working torque (fwd): 135-704 Nm S2S technology and 3 setting positions Free speed: 7,000 rpm Twin hammer clutch Weight
More information- GLOBAL.com
FASTENER TOOS www.aimco-goba.com STANDARD FASTENER TOOS STANDARD FASTENER TOOS Connect your tool to the application with Bits, Sockets and Nutsetters from AIMCO. AIMCO has assembled the most complete package
More information18VDC ESB6 Series Cordless Screwdrivers Operation Manual
18VDC ESB6 Series Cordless Screwdrivers Screwdriver Models : ESB6-8, ESB6-12, ESB6-15, ESB6-22 CAUTION - Please read, understand, and follow all operating and safety instructions in this manual before
More informationHVAC PLUMBING TOOLS CATALOG 2019 F-1. PIPE cutters. Excellent for cutting tubing insulation Strong nylon handle
hand tools PIPE cutters Excellent for cutting tubing insulation Strong nylon handle Ratchet action 1-5/8-Inch capacity Heat treated blade 36101 Little Tubing Cutter EA 10 36102 2 Replacement Blades PK
More informationSPECIFICATIONS Power input (W) No load speed (rpm) Hammer rate (under load) Drilling concrete / steel / wood 24 / 13 / 30 mm
BH 24 IE 24 MM SDS-Plus Rotary Hammer Powerful 800 watt motor 24 mm drilling capacity in concrete Safety clutch for user protection Variable speed electronics for control Hammer action stop for drilling
More informationFastening Tools Lou Zampini & Associates
Fastening Tools Safety Instructions and Contents Specific Safety Instructions for Power Tool Groups In addition to the General Safety Instructions, the following are safety instructions and warnings that
More informationAriac sistemi per la qualità
Ariac sistemi per la qualità Quality Assurance in Tightening Quality assurance your competitive edge! A loose or improperly tightened joint in any assembly operation can cause serious problems and have
More informationDRILLS. Parts Interchangeability. Precision Parts. Ultimate Ergonomics
DRILLS Dotco drills are used daily in applications ranging from aerospace to oil fields and refineries. Three styles are available - pistol grip, inline, and right angle models. in this section range from
More information3/8-Inch Torque Wrench Square Drive, Torque Range Of 30 to 250 Inch Pound (3.39 to NM)
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 57005 3/8" Torque Wrench Square Drive Klein Tools Catalog Number 57005 Manufacturer Klein Tools 3/8-Inch Torque Wrench
More informationE-DRIV MD-Series DC Torque Control System Calibration Procedure
Revision: 1.1 July 05, 2017 E-DRIV MD-Series DC Torque Control System Calibration Procedure www.mountztorque.com 1080 N 11 th St - San Jose CA 95112-408.292.2214 1 GENERAL SAFETY RULES WARNING! Read and
More informationMinimally protruding jaw shank for greater capacity in tight spaces.
Klein s line of wrenches are forged from the finest steel and are designed to deliver great strength and long working life. Regardless of the job type, Klein has a wrench that will help the professional
More informationSIOUX TOOLS INDUSTRIAL CATALOG DRILLS DRILLS
SIOUX TOOLS INDUSTRIAL CATALOG DRILLS DRILLS Index Drills................... 12 18 Drill Accessories...............19 9 10 DRILLS SIOUX TOOLS INDUSTRIAL CATALOG DRILLS Performance, Serviceability, Ergonomics
More informationStands. MC55 Cylinder-Operated Stand With Linear Bearings. R55-S Lever-Operated Stand. D54 Lever-Operated Stand For SD, DM6, 2DM6 Motors
Stands MC55 Cylinder-Operated Stand With Linear Bearings Part No. 902914 Weight: 70.4lb (32kg) Max. Stroke: 4 in. (100mm) Max. Mounting Plate Load: 150lb (68kg) 8.66 9.84 40.16 7.05 25.43 Max approx. 1.57
More informationIndustrial REDIPOWER. Tools. The New Generation of Power Tools. The Ultimate Power Tools
Industrial Tools The Ultimate Power Tools REDIPOWER The New Generation of Power Tools IMPACT WRENCHES - 3/8" DRIVE RP9521 Taille 1 des shoots photos Rocking Dog clutch Good for very soft joints Fast
More informationTRI-LOBULAR INSERT BITS 1/4" HEX DRIVE Length Pack Bordo Price Code MM Qty Code Each TRI-LOB TLx25
SCREW DRIVER BITS PHILLIPS INSERT BITS 27020 No.1 25 10 EXTRA HARD 2607001510 27021 No.2 25 10 EXTRA HARD 2607001514 37514 No.2 50 10 EH R/SHK 37515 No.2 75 10 EH R/SHK 27207 No.3 25 10 5/16 HEX DR 27022
More informationAccessories for the measurement of tightening torque. Digital and electronics dynamometric wrenches
Accessories for the measurement of tightening torque Digital and electronics dynamometric wrenches Methods used for the measurement of tightening torque For an effective analysis of the tightening process,
More informationproduct catalog / March 1, 2003
MADE IN U.S.A product catalog / March 1, 2003 MANUFACTURERS OF HIGH QUALITY AMERICAN MADE HAND TOOLS FOR OVER FIFTY YEARS users guide to hex AND torx tools A USER'S GUIDE TO HEX AND TORX TOOLS WHEN YOU
More informationSturtevant Richmont Presents: Error Proof Your Error Proofing With A Complete Torque Verification Program
Sturtevant Richmont Presents: Error Proof Your Error Proofing With A Complete Torque Verification Program Quality programs and processes are all about eliminating variables and replacing them with accurate
More information2666:- 1/2 5095:- 3/4 5095:- 1
2666:- 1/2 5095:- 3/4 5095:- 1 ATEX CP6748EX 1/2 ATEX CP6768EX 3/4 ATEX CP6778EX 1 The Best 1/2 Art Nr 6151590570 WORKING TORQUE (FWD) 180-760 Nm MAXIMUM TORQUE (REVERSE) 1085 Nm FREE SPEED 8400 rpm WEIGHT
More informationAPT PAVING BREAKERS TOOL MAINTENANCE & REPAIR INFORMATION REMEMBER: PREVENTIVE MAINTENANCE WILL ASSURE MAXIMUM PERFORMANCE FROM ALL OF YOUR APT TOOLS.
PAVING BREAKERS AMERICAN PNEUMATIC TOOL TOOL MAINTENANCE & REPAIR INFORMATION Check BEFORE, DURING AND AFTER use of tools. FIELD OPERATION: Before: 1. Fill the oil reservoir with Air Tool oil or 10W equivalent.
More information9500:- SUPERLATIVE PERFORMANCE & ERGONOMICS AUTOBALANCER. CP AA5VK Art nr SPECIAL OFFER OFFER. People. Passion. Performance.
SUPERLATIVE PERFORMANCE & ERGONOMICS AUTOBALANCER 9500:- P remium Tool CP3650-120AA5VK Art nr 6151607180 Spindle thread:...m14 Wheel size:...125 mm Power:...1700 W Free speed:...12000 rpm Length:...238
More informationVECTRIX VX-2 SERVICE MANUAL. Version 1.0/May 2011 VECTRIX, LLC
www.vectrix.com CONTENTS SECTION A: Tools 1 Tools Needed SECTION B: Mechanical Parts 1 Front Fairing 2 Front Console Cover 3 Speedometer Cover 4 Front Vertical Panel Cover-Lower 5 Front Vertical Panel
More informationNutrunners Transducerized Type
Nutrunners Transducerized Type Tensor STB offers genuine ergonomic Low tool weight and high spindle speed reduce cycle time. Freedom of movement in all working positions. Lightweight components help reduce
More informationMeeting the needs of automotive customers and MRO organizations, no toolbox is complete without an assortment of specialty items. Blackhawk by Proto
Specialty tools Meeting the needs of automotive customers and MRO organizations, no toolbox is complete without an assortment of specialty items. Blackhawk by Proto includes popular puller configurations,
More informationPneumatic Torque Motors
Pneumatic Torque Motors Contents and Torque Motor Selection Contents Torque Motor Selection... page 2 Torque Controlled Shut Off... page 4 SC Series... page 4 SD Series... page 6 F Series... page 8 Accessories...
More informationAngle Nutrunners. Selecting Your Cleco Nutrunner. Clean Operation. Right Angle
TORQUE (Nm) 500 400 300 200 100 50 40 30 20 10 5 Right Angle Selecting Your Cleco Nutrunner Cleco offers over 500 nutrunners, most of which can be equipped with a wide variety of drive options. This generates
More informationAuto Feed Drills & Tappers. Comprehensive range Single spindle operations Multi-spindle processes. More Than Productivity
Auto Feed Drills & Tappers Comprehensive range Single spindle operations Multi-spindle processes More Than Productivity AFD Applications Ease of Integration into Machine or Process Extensive range of mounting
More informationSIOUX TOOLS SIGNATURE SERIES PRODUCT BROCHURE SPECIALTY CLINCH NUT
SIOUX TOOLS SIGNATURE SERIES PRODUCT BROCHURE SPECIALTY CLINCH NUT S E R I E S SPECIALTY SIOUX TOOLS SIGNATURE SERIES PRODUCT BROCHURE Tool Selection / Order Guide Selecting the proper tool for your clinch
More informationCOMPLETE SYSTEMS ARTICULATING ARMS TAPPERS & MORE!
COMPLETE SYSTEMS ARTICULATING ARMS TAPPERS & MORE! TAP-RITE TAPPING SYSTEMS The Most Convenient & Efficient Option For Tapping! Our Complete Tapping System Includes Everything You See Here! Tapping Motor
More information3260:- 1/2 6220:- 3/4 6220:- 1
3260:- 1/2 6220:- 3/4 6220:- 1 ATEX CP6748EX 1/2 ATEX CP6768EX 3/4 ATEX CP6778EX 1 The Best 1/2 Art Nr 6151590570 WORKING TORQUE (FWD) 180-760 Nm MAXIMUM TORQUE (REVERSE) 1085 Nm FREE SPEED 8400 rpm WEIGHT
More informationSpanners. Spanners. Open-ended spanners DIN 3110 Chromium plated - < 15
Spanners Open-ended spanners IN 3110 Chromium plated - < 15 35201 Metric sizes 35301 Inch sizes 3,2 x 5,5 4 x 5 1/4 x 9/32 (6,3 x 7,1) 6 x 7 1/4 x 5/16 (6,3 x 7,9) 6 x 8 7 x 8 7 x 9 8 x 9 8 x 10 11/32
More informationBecause ensuring a leak-free solution is critical. It has to be Hydratight.
Torque Solutions Because ensuring a leak-free solution is critical. It has to be Hydratight. For more than 100 years, Hydratight has provided world-class bolted joint solutions, assessing and managing
More informationHandling Devices Made for the interaction of man and machine
44 Handling Devices Made for the interaction of man and machine Ingersoll Rand offers: Standard and custom solutions Manual and powered tilt and rotation packages Innovative designs from the simplest to
More informationSTANDARD FASTENER TOOLS
STANDARD FASTENER TOOS STANDARD FASTENER TOOS Connect your tool to the application with Bits, Sockets and Nutsetters from AIMCO. AIMCO has assembled the most complete package of commonly used screwdriver
More information