Long thread stem nut to provide long thread life and permit the removal of hand wheel even at full open.
|
|
|
- Allen Stafford
- 6 years ago
- Views:
Transcription
1 Design Feature Gate Valve O EMISSION FEATURE PEASE REFER PAGE:42 ong thread stem nut to provide long thread life and permit the removal of hand wheel even at full open. Spacer rg and sgle pac set for class and above while only sgle pac set for class 150. Double pacs can be provided on customer's requirement. Corrugated steel gasket for 150lb valves, spiral wound gasket for lb & 600lb valves, and rg jot for 900lb & above valves or as a optional for the 600lb valves on customer request. Integral guide rig side body to assure selfcenterg of wedge durg open or closg. Flexible wedge to compensate for seat face distortion and body deformation due to pipe stress. Anti blowout stem design with collar. Stem & wedge connection stronger than the thread area of stem. Renewable seal welded seats with satellite 6 are standard design while screwed seats are optional. 11
2 Gate Valve Material ist Dimension & eight Gate Valve Part ow Temperature Staless Steel igh Temperature Sour Class 150 Cast Carbon Steel Gate Valve BODY ASTM A216CB ASTM A352CC ASTM A351CF8M ASTM A217C9 ASTM A216CB BONNET ASTM A216CB ASTM A352CC ASTM A351CF8M ASTM A217C9 ASTM A216CB EDGE ASTM A216CB/CR13 OVERAY ASTM A217 CA15(&Smaller) ASTM A352CC/316 OVERAY ASTM A351CF8M ASTM A217C9/ST. OVERAY ASTM A216CB/CR13 OVERAYNC ASTM A217 CA15(&Smaller)NC Screwed Back seat, Risg Stem, Nonrisg andwheel, Flexible edge 8" to & arger STEM NUT ASTM A439 D2 ASTM A439 D2 ASTM A439 D2 ASTM A439 D2 ASTM A439 D2 GAND FANGE ASTM A216CB ASTM A352CB ASTM A351CF8 ASTM A216CB ASTM A216CB G1R,CB/NO.8 G1B,CB/NO.8 ANDEE DUCTIE IRON DUCTIE IRON DUCTIE IRON DUCTIE IRON DUCTIE IRON SEAT RING ASTM A105/ST. OVERAY ASTM A182F316/ST. OVERAY ASTM A182F316/ST. OVERAY ASTM A182F22/ST. OVERAY ASTM A105/ST. OVERAY STEM ASTM A182F6a ASTM A182F316 ASTM A182F316 ASTM A182F6a ASTM A182F6aNC BACK SEAT ASTM A ASTM A ASTM A ASTM A ASTM A276420NC GAND ASTM A STAINESS STEE ASTM A ASTM A ASTM A276420NC GASKET SPIRA OUND GRAPITE SPIRA OUND GRAPITE SPIRA OUND GRAPITE SPIRA OUND GRAPITE SPIRA OUND GRAPITE (RF) (B) T(RF) T(B) 2" 50 21/2" 65 3" 80 4" 100 5" 125 6" 150 8" " " " " " 500 YOKE FOR 14"&arger 24" " " " " 800 B End 36" " " " MIDDE PACKING GRAPITE GRAPITE GRAPITE GRAPITE GRAPITE TOP/BOTTOM PACKING 316+GRAPITE 316+GRAPITE 316+GRAPITE 316+GRAPITE 316+GRAPITE * (1) For size of larger than 48" valve, Please contact Neway sales or engeerg team for details. Class Cast Carbon Steel Gate Valve RETAINING NUT CARBON STEE CARBON STEE STAINESS STEE CARBON STEE CARBON STEE ANDEE NUT CARBON STEE CARBON STEE STAINESS STEE CARBON STEE CARBON STEE BONNET STUD ASTM A193B7 ASTM A3207M ASTM A193B8 ASTM A193B16 ASTM A193B7M Screwed Back seat, Risg Stem, Nonrisg andwheel, Flexible edge 8" to & arger BONNET NUT ASTM A1942 ASTM A1947M ASTM A1948 ASTM A1944 ASTM A1942M EYE BOT ASTM A193B7 ASTM A3207M ASTM A193B8 ASTM A193B16 ASTM A193B7M G3R,CB/NO.8 G3B,CB/NO.8 GAND NUT ASTM A1942 ASTM A1947M ASTM A1948 ASTM A1944 ASTM A1942M YOKE FOR 12 &arger B End GREASE FITTING CARBON STEE CARBON STEE STAINESS STEE CARBON STEE CARBON STEE EYE BOT PIN CARBON STEE STAINESS STEE STAINESS STEE STAINESS STEE CARBON STEE RIVET CARBON STEE CARBON STEE STAINESS STEE CARBON STEE CARBON STEE NAME PATE STAINESS STEE STAINESS STEE STAINESS STEE STAINESS STEE STAINESS STEE Notes: Above materials are general, when ordered, Please contact NEAY Sales or technical team to confirm the details. (RFB) T(RF) T(B) " 50 21/2" 65 3" 80 4" * (1) For size of larger than 48" valve, Please contact Neway sales or engeerg team for details. 5" 125 6" 150 8" " 14" " " " " " " " " " " " "
3 Gate Valve Dimension & eight Dimension & eight Gate Valve Class 600 Cast Carbon Steel Gate Valve Class 1500 Cast Carbon Steel Gate Valve Screwed Back seat, Risg Stem, Nonrisg andwheel, Flexible edge 4" to & arger Screwed Back seat, Risg Stem, Nonrisg andwheel, Flexible edge 4" to 6 8 & arger G6R,CB/NO.8 G6J,CB/NO.8 G6B,CB/NO.8 YOKE FOR 10 &arger B End 2 G15R,CB/NO.5 G15J,CB/NO.5 G15B,CB/NO.5 YOKE FOR 6 &arger B End 2 (RFB) 2(RTJ) T(RF) T(B) " 50 21/2" 65 3" 80 4" 100 5" 125 6" 150 8" " 14" * (1) For size of larger than 48" valve, Please contact Neway sales or engeerg team for details. 16" " " " " " " " " " " " 1200 (RFB) 2(RTJ) T(RF) T(B) 2" 21/2" 3" 4" 6 8" 12" 14" 16" 18" 20" 24" 26" 28" 30" Class 900 Cast Carbon Steel Gate Valve Class 2500 Cast Carbon Steel Gate Valve Screwed Back seat, Risg Stem, Nonrisg andwheel, Flexible edge 4" to 6 8 & arger Bolted Bonnet OS&Y,Risg Stem, Nonrisg andwheel, Flexible edge 4" to 6 8 & arger G9R,CB/NO.5 G9J,CB/NO.5 G9B,CB/NO.5 YOKE FOR 6 &arger B End 2 G25R,CB/NO.5 G25J,CB/NO.5 G25B,CB/NO.5 YOKE FOR 6 &arger B End 2 (RFB) 2(RTJ) T(RF) T(B) 2" 21/2" 3" 4" 6 8" 12" 14" 16" 18" 20" 24" 26" 28" 30" 32" 36" " 21/2" 3" 4" 6 8" 12" 14" 16" 18" 20" 24" (RFB) 2(RTJ) T(RF) T(B)
4 Globe Valve Design Feature Material ist Globe Valve Part ow Temperature Staless Steel igh Temperature Sour BODY ASTM A216CB ASTM A352CC ASTM A351CF8M ASTM A217C9 ASTM A216CB BONNET ASTM A216CB ASTM A352CC ASTM A351CF8M ASTM A217C9 ASTM A216CB DISC ASTM A182F6a ASTM A105/ER410 (FOR 4"&arger) ASTM A182F316 ASTM A182F316 ASTM A182 F22/ST.OVERAY ASTM A182F6aNC STEM NUT ASTM A439 D2 ASTM A439 D2 ASTM A439 D2 ASTM A439 D2 ASTM A439 D2 O EMISSION FEATURE PEASE REFER PAGE:42 GAND FANGE ASTM A216CB ASTM A352CB ASTM A351CF8 ASTM A216CB ASTM A216CB ANDEE DUCTIE IRON DUCTIE IRON DUCTIE IRON DUCTIE IRON DUCTIE IRON IMPACT BOCK CARBON STEE CARBON STEE CARBON STEE CARBON STEE CARBON STEE RETAIN PATE CARBON STEE CARBON STEE CARBON STEE CARBON STEE CARBON STEE SEAT RING ASTM A105/ST.OVERAY ASTM A182 F316/ST.OVERAY ASTM A182 F316/ST.OVERAY ASTM A182 F22/ST.OVERAY ASTM A105/ST.OVERAY STEM ASTM A182F6a ASTM A182F316 ASTM A182F316 ASTM A182F6a ASTM A182F6aNC BACK SEAT ASTM A ASTM A ASTM A ASTM A ASTM A276420NC GAND ASTM A STAINESS STEE ASTM A ASTM A ASTM A276420NC SPACE RING ASTM A ASTM A ASTM A ASTM A ASTM A276420NC DISC NUT ASTM A ASTM A ASTM A ASTM A ASTM A276420NC STEM ASER ASTM A NO NO ASTM A STAINESS STEE ANDEE ASER CARBON STEE CARBON STEE STAINESS STEE CARBON STEE CARBON STEE BONNET GASKET SOFT STEE ASTM A ASTM A SOFT STEE SOFT STEE PACKING 316+GRAPITE 316+GRAPITE 316+GRAPITE 316+GRAPITE 316+GRAPITE PACKING GRAPITE GRAPITE GRAPITE GRAPITE GRAPITE BONNET STUD ASTM A193B7 ASTM A3207M ASTM A193B8 ASTM A193B16 ASTM A193B7M BONNET NUT ASTM A1942 ASTM A1947M ASTM A1948 ASTM A1944 ASTM A1942M EYE BOT ASTM A193B7 ASTM A3207M ASTM A193B8 ASTM A193B16 ASTM A193B7M Impact handwheel supplied by manufacturer's option or on customer request. Gland eyebolts are mounted to swg aside to facilitate pac matenance. Male and female bonnet jots for 150lb to 600lb valves, and rg jot for the 900lb & above valves or as an optional for 600lb valves on customer request. Anti blowout stem design with conical backseat surface to permit repac of valve the fully open position. GAND NUT ASTM A1942 ASTM A1947M ASTM A1948 ASTM A1944 ASTM A1942M ANDEE NUT CARBON STEE CARBON STEE STAINESS STEE CARBON STEE CARBON STEE EYE BOT PIN CARBON STEE STAINESS STEE STAINESS STEE STAINESS STEE CARBON STEE RIVET CARBON STEE CARBON STEE STAINESS STEE CARBON STEE CARBON STEE NAME PATE STAINESS STEE STAINESS STEE STAINESS STEE STAINESS STEE STAINESS STEE Notes: Above materials are general, when ordered, Please contact NEAY Sales or technical team to confirm the details. Plug seat surface is standard disc design as well as spherical and flat seatg surface is optional on customer request. Seat face with satellite 6 is standard design
5 Globe Valve Dimension & eight Dimension & eight Globe Valve Class 150 Class 600 ScrewedBack Seat, Risg Stem and andwheel, 14" to 16" 18" & arger Impact andwheel For and arger B End For 16"&arger Screwed Back Seat, Risg Stem and andwheel, 6" to 12" & arger Impact andwheel For 4" and arger For 16"&arger YOKE For 8"&arger GR,CB/NO.8 GB,CB/NO.8 G6R,CB/NO.8 G6B,CB/NO.8 B End 2 2" 21/2" 3" 4" 5" 6" 8" 12" 14" 16" 18" 20" 24" (RFB) T(RF) T(B) Class Screwed Back Seat, Risg Stem and andwheel, " to 12" 14" & arger Impact andwheel For 6" and arger B End For 16"&arger " 21/2" 3" 4" 5" 6" 8" 12" 14" 16" 18" (RFB) 2(RTJ) Class T(RF) T(B) Screwed Back Seat, Risg Stem and andwheel, 4" to 6" 8" & arger G3R,CB/NO.8 G3B,CB/NO.8 2" 21/2" 3" 4" 5" 6" 8" 12" 14" 16" 18" 20" (RFB) T(RF) T(B) G9R,CB/NO.5 G9J,CB/NO.5 G9B,CB/NO.5 YOKE For 8"&arger 2" 21/2" 3" 4" 6" 8" 12" 14" 16" (RFB) 2 (RTJ) T(RF) T(B) B End
6 Globe Valve Dimension & eight Design Feature Check Valve Class 1500 Screwed Back Seat, Risg Stem and andwheel, 2" to 3" 4" & arger O EMISSION FEATURE PEASE REFER PAGE:42 G5R,CB/NO.5 G5J,CB/NO.5 G5B,CB/NO.5 YOKE For 6"&arger B End 2 2" 21/2" 3" 4" 6" 8" 12" (RFB) 2 (RTJ) T(RF) T(B) Class 2500 Screwed Back Seat, Risg Stem and andwheel, 2" 3" & arger G25R,CB/NO.5 G25J,CB/NO.5 G25B,CB/NO.5 YOKE For 6"&arger B End 2 Corrugated steel gasket for 150lb valves, spiral wound gasket for lb & 600lb valves, and rg jot for 900lb & above valves or as a optional for the 600lb valves on customer request. A hge and hge p provided and mounted so as to permit full movement of the disc. 2" 21/2" 3" 4" 6" 8" (RFB) 2(RTJ) T(RF) T(B) renewable seal welded seat with satellite 6 while optional screwed seat. swg type disc only horizontal pipe les handlg liquids. Normal provision for a dra tappg at location G while additional bosses on customer request
7 A Check Valve Material ist Dimension & eight Check Valve Part ow Temperature Staless Steel igh Temperature Sour Class 150 BODY ASTM A216CB ASTM A352CC ASTM A351CF8M ASTM A217C9 ASTM A216CB 6"&arger COVER ASTM A216CB ASTM A352CC ASTM A351CF8M ASTM A217C9 ASTM A216CB Swg Type Disc B End DISC ASTM A217 CA15(4"&Smaller) &ASTM A216CB/ER410 ASTM A352CC/316 OVERAY ASTM A351CF8M ASTM A217C9/ST. OVERAY ASTM A217CA15 NC(4"&Smaller) &ASTM A216CB/ER410NC INGE ASTM A216CB ASTM A352CC ASTM A351CF8M ASTM A217C9 ASTM A216CB S1R,CB/NO.8 S1B,CB/NO.8 SEAT RING ASTM A105/ST. OVERAY ASTM A182F316/ST. OVERAY ASTM A182F316/ST. OVERAY ASTM A182F22/ST. OVERAY ASTM A105/ST. OVERAY INGE PIN ASTM A ASTM A ASTM A ASTM A ASTM A276410NC PUG FOR INGE PIN CARBON STEE ASTM A ASTM A STAINESS STEE CARBON STEE (RFB) 2" 21/2" 3" 4" 5" 6" 8" 12" 14" 16" 18" 20" 24" 26" 28" 30" 32" 36" 40" 42" 48" ASER STAINESS STEE ASTM A ASTM A STAINESS STEE STAINESS STEE DISC NUT ASTM A ASTM A ASTM A ASTM A STAINESS STEE T(RF) T(B) DISC ASER ASTM A ASTM A ASTM A ASTM A STAINESS STEE * (1) For size of larger than 48" valve, Please contact Neway sales or engeerg team for details. DISC SPIT PIN ASTM A ASTM A ASTM A ASTM A STAINESS STEE BONNET RING JOINT SOFT STEE ASTM A ASTM A ASTM A SOFT STEE Class 5"&arger BONNET STUD ASTM A193B7 ASTM A3207M ASTM A193 B8 ASTM A193B16 ASTM A193B7M Swg Type Disc B End BONNET NUT ASTM A1942 ASTM A1947M ASTM A194 8 ASTM A1944 ASTM A1942M A RIVET CARBON STEE CARBON STEE STAINESS STEE CARBON STEE CARBON STEE NAME PATE STAINESS STEE STAINESS STEE STAINESS STEE STAINESS STEE STAINESS STEE S3R,CB/NO.8 S3B,CB/NO.8 OOK SCRE CARBON STEE CARBON STEE STAINESS STEE CARBON STEE CARBON STEE Notes: Above materials are general, when ordered, Please contact NEAY Sales or technical team to confirm the details. (RFB) 2" 21/2" 3" 4" 5" 6" 8" 12" 14" 16" 18" 20" 24" 26" 28" 30" 32" 36" 40" 42" 48" T(RF) T(B) * (1) For size of larger than 48" valve, Please contact Neway sales or engeerg team for details
8 Check Valve Dimension & eight Dimension & eight Check Valve Class 600 Class " & arger Swg Type Disc B End Swg Type Disc B End S6R,CB/NO.8 S6B,CB/NO.8 2 S15R,CB/NO.8 S15B,CB/NO.8 S15J,CB/NO.8 2 (RFB) 2 (RTJ) T(RF) T(B) 2" 21/2" 3" 4" 5" 6" 8" 12" 14" 16" 18" 20" 24" 26" 28" 30" " 36" 40" 42" 48" (RFB) 2 (RTJ) T(RF) T(B) 2" 21/2" 3" 4" 6" 8" 12" 14" 16" 18" 20" 24" 26" 28" 30" * (1) For size of larger than 48" valve, Please contact Neway sales or engeerg team for details. Class 900 Class 2500 Swg Type Disc B End Swg Type Disc B End S9R,CB/NO.8 S9B,CB/NO.8 S9J,CB/NO.8 2 S25R,CB/NO.8 S25B,CB/NO.8 S25J,CB/NO.8 2 (RFB) 2 (RTJ) T(RF) T(B) 2" 21/2" 3" 4" 6" 8" 12" 14" 16" 18" 20" 24" 26" 28" 30" 32" 36" (RFB) 2 (RTJ) T(RF) T(B) 2" 50 21/2" 65 3" 80 4" 100 6" 150 8" " 14" " " " "
Product Range Neway Cast Carbon Steel Gate,Globe & Check Valves. Valve Size Gate Valve Globe Valve Check Valve
Product Range Neway Cast Carbon Steel Gate,Globe & Check Valves. Valve Size 2" 2.5" 3" 4" 5" 6" 8" 10" 12" 14" 16" 18" 20" 24" 26" 28" 30" 32" 36" 40" 42" 48" 52" 54" 56" 60" 64" 150 300 API 600 & B16.34
Forged Steel Valve Complete Solutions for Engineered Valves
Forged Steel Valve Complete Solutions for Engineered Valves NEAY VAVE Cat.no.:EFSV0 Table of Contents Introduction Quality Commitment ~ Products Views ow to Order Complete Solutions for Engineered Valves
PRESSURE SEAL PARALLEL GATE VALVES PRESSURE SEAL BONNET
PRESSURE SEA PARAE GATE VAVES CAST STEE PRESSURE SEA PARAE GATE VAVES YOKE SEEVE The upper portion of the Yoke Sleeve is hexagonally tapered to fix the handwheel. The standard material of the Yoke Sleeve
NEWAY VALVE. Complete Solutions for Engineered Valves. Distributed by:
Cat.no.:EGGC Forged Steel Valves Complete Solutions for Engineered Valves Cat.no.:EPV Cat.no.:EAV istributed by: No. Xiangjiang Road, Suzhou New istrict,p.r. China Post Code: Tel: Fax: 0 EMail: neway@neway.com.cn
GATE VALVES BOLTED BONNET
삼우 카다록 (P) 9..9 11:0 PM 페이지 1 삼우 카다록 (P) 9..9 11:0 PM 페이지 15 CAST STEE YOKE SEEVE The upper portion of the Yoke Sleeve is hexagonally tapered to fix the handwheel. The standard material of the Yoke Sleeve
KO Series. Cast Steel Gate Valves
FEATURES & BENEFITS Body and bonnet of Class 150 - Class 900 gate valves are usually connected with studs and nuts. The body and bonnet of Class 1500 - Class 2500 gate valves are usually a pressure sealed
FUNCTION BODY AND BONNET BODY-BONNET JOINT
GATE VAVE FUNCTION Gate valve is characterized by a sliding wedge which is moved by actuator perpendicular to the flow direction. There are a variety of valve sizes and types. The valve is used primarily
Floating Ball Valve - Design Features
408 imbledon Rd. / Edmond, OK 73003 / Phone: 405-509-2665 / Fax: 866-239-1587 / www.mako-products.net Flanged Ball Valves Floating Ball Valve - Design Features Mounting and Stem Seal Design Actuator Mounting
CAST STEEL GATE VALVE
CAST STEEL GATE VALVE DESIGN CHARACTERISTICS OF API00 CAST STEEL GATE VALVE The design of thrust bearing makes valve opened easily and flexibly. Handwheel Nut Handwheel Stem Nut Retainer Stem Nut Lubricating
HANCOCK GATE, GLOBE AND CHECK VALVES CAST STEEL
ANCOCK GATE, GOBE AND CECK VAVES CAST STEE A range of ASME Class 150, 300 and 600 bolted bonnet cast steel valves, with metal-to-metal seating in flanged or butt weld ends FEATURES Gate valves Internal
BOLTED BONNET API 600
PACIFIC VALVES BOLTED BONNET API 600 By Subject Product Overview...2-4 Gate Valves Major Features...5 Gate Valves Optional Features...6 Materials of Construction: Gate Valves...7 Gate Valves Product Line...8-10
Bolted Bonnet Valves. (BL Series) Cast Steel. Cast Steel Bolted Bonnet Valves - BL Series
Cast Steel Bolted Bonnet Valves (BL Series) Gate Valve - BL5 Series Gate Valve Features Globe Valve - BL6 Series Globe Valve Features Swing Check Valve - BL7 Series Optional Features Model Numbers GATE
Ball Valves. DHV Industries, Inc. DHV Valve Company Inc Pegasus Drive Bakersfield, CA U.S.A. Phone: (661) Fax: (661)
3451 Pegasus Drive Bakersfield, CA 93308 U.S.A. Call Toll Free: (877) DHV-USA1 Phone: (661) 392-8948 Fax: (661) 392-8947 E-mail: sales@dhvindustries.com Website: www.dhvindustries.com DHV Valve Company
SMITH VALVE. The Solid Collection. High Pressure Integral Flanged Gate, Globe & Check Valves
SMITH VALVE The Solid Collection The Longest Lastg Le of Integrally Flanged, Round Bolted RTJ Bonnet, Full Bore, Gate, Globe & Check Valves High Pressure Integral Flanged Gate, Globe & Check Valves Flanged
HANCOCK 600 GATE, GLOBE AND CHECK VALVES CAST STEEL
ANCOCK 600 GATE, GOBE AND CECK VAVES CAST STEE A range of ASME Class 150, 300 and 600 bolted bonnet cast steel valves, with metal-to-metal seating in flanged or butt weld ends FEATURES Gate valves Internal
L&T VALVES BUSINESS GROUP A
Larsen & Toubro Limited (L&T) is a US $ 5 billion engineering and construction company, with a strong presence in manufacturing, services and Information Technology. L&T was founded in 1938 by two Danish
Ball valve are designed, constructed and tested according to API-6D standards.
A VAVE DESIGN AND TEST all valve are designed, constructed and tested according to APID standards. DOUE OCK AND EED All trunnion mounted type ball valve employ a sealing principle that facilitates all
arflu globe valves The quality you can trust Globe valves Because of their configuration,
The quality you can trust globe valves 2 18 Globe valves Because of their configuration, globe valves are perfect to regulate or limit the fluid port. epending on the needs of the system, design or open
SMITH VALVE. The Solid Collection. High Pressure Integral Flanged Gate, Globe & Check Valves
SMITH VALVE The Solid Collection The Longest Lastg Le of Integrally Flanged, Round Bolted RTJ Bonnet, Full Bore, Gate, Globe & Check Valves High Pressure Integral Flanged Gate, Globe & Check Valves Flanged
A Long Experience in Energy Equipment and one Goal: The Customer s satisfaction. GLOBE VALVES. Pressure Seal - Bolted Bonnet Cryogenic.
A Long Experience in Energy Equipment and one Goal: The Customer s satisfaction. GLOBE VALVES Pressure Seal - Bolted Bonnet Cryogenic. 1 Design 2 Outside 3 Face 4 Non 5 Suggested 6 Dimension 7 Special
Cast Steel Bolted Cover Swing Check Valves Sizes: 2 thru 24 Pressure Class: 150 thru 1500
Cast Steel olted Cover Swing Check Valves s: 2 thru 24 Pressure Class: 150 thru 1500 Manufactured by Newmans 33 Newco Cast Carbon Steel olted onnet Valves Typical Newco Cast Steel olted Cover Swing Check
Compact Expanding Gate. Double Disc Parallel Slide ORION STEEL VALVES API 6D API 600
ORION STEEL VALVES Compact Expanding Gate API 6D Double Disc Parallel Slide API 600 PARALLEL SLIDE COMPACT EXPANDING GATE API 6D - DOUBLE DISC PARALLEL SLIDE API 600 - p. 155 Class ASME 150 (PN 20) 300
GLOBE VALVE APPLICATION
SPECIFICATION GOBE VAVE APPICATION Globe valves are primarily use as control valves where throttling or both throttling an shut-off are require. Globe valves can also be use for on-off service; however,
GWC Italia. Proven technology for individual valve solutions worldwide CAST STEEL VALVES GATE, GLOBE & CHECK CSV-1004
GWC Italia Proven technology for individual valve solutions worldwide CAST STEEL VALVES GATE, GLOBE & CHECK CSV-1004 GWC ITALIA Proven technology for individual valve solutions worldwide GWC Italia Worldwide
Cast Carbon and Low Alloy Steel Valves ASME Class 150 / 300 / 600 / 900 / 1500 / 2500 Gate, Globe and Check Valves, Bolted Bonnet Design
K-170=06 Cast Carbon and Low Alloy Steel Valves ASME Class 150 / 300 / 600 / 900 / 1500 / 2500 Gate, Globe and Check Valves, Bolted Bonnet esign ultimate performance and efficiency. Its ma feature is a
(GATE, GLOBE, CHECK & BUTTERFLY)
Customer Focused ighest Quality Products Engineered to Exact Detail QUALITY VALVES CAST STEEL VALVES (GATE, GLOBE, CECK & BUTTERFLY) WEDGE GATE VALVES, PARALLELED DISC AND PRESSURE SEAL BONNETS Size: 1-1/2
A Long Experience in Energy Equipment and one Goal: The Customer s satisfaction. FORGED. Gate, Globe & Check Valves.
A Long Experience in Energy Equipment and one Goal: The Customer s satisfaction. FORGED Gate, Globe & Check Valves. VALVITALIA VITAS DIVISION PLANT Some production example of Forged Steel Valves 2 Valves
AN ISO 9001 : 2008 COMPANY GLOBE VALVES. Get the edge in process control. Butterfly Valves India Pvt. Ltd.
N ISO 9001 : 2008 OMPNY GLOE VLVES Get the edge in process control utterfly Valves India Pvt. Ltd. Introduction Hi-TEH Manufacturing Programme Valve Type End SME 2 2½ 3 4 5 6 8 10 12 onn. lass DESIGN STNDRD
Cast Carbon and Low Alloy Steel Valves. ASME Class 150/300/600/900/1500/2500 Gate, Globe and Check Valves, Bolted Bonnet Design
Cast Carbon and Low Alloy Steel Valves ASME Class ///900/1/0 Gate, Globe and Check Valves, Bolted Bonnet esign I N E X Profile of KITZ Cast Steel Valves...1 Standard Product Range...2 Standard Seat Material
Cast Carbon and Low Alloy Steel Valves
Cast Carbon and Low Alloy Steel Valves ASME Class 1///900/1/0 Gate, Globe and Check Valves, Bolted Bonnet esign PROVIE BY: PT. SINAR MAS SAKTI TEL: (62 21) 88 FAX: (62 21) 62910 EMAIL: sales@smsakti.com
TECHNICAL DATASHEET Pacific CSV Cast Steel Valves
brands you trust. TECNICA DATASEET Pacific CSV Cast Steel Valves Crane ChemPharma & Energy Gate, Globe and Check Features and Benefits The new Pacific CSV valves have been redesigned to improve performance
CAST STEEL FLANGED GATE, GLOBE, & CHECK VALVES.
CAST STEEL FLANGED GATE, GLOBE, & CHECK VALVES www.fnw.com Index Options & Accessories... 2 Standards... 2 Figure Number Matrix... 3 Pressure/Temperature Ratings... 3 Hydrostatic Test Pressures... 3 Carbon
Cast Steel Valves. Contents Contents. Figure Number Index. Figure Number Cross Reference. Valve Type Class Stockham Jenkins
Stockham Cast Valves Cast Valves Contents Contents Performance in Any Application...4 How to Specify and Order Valves...4 Installation, Marking and Identification...5 Gate Valves...6 Globe Valves...11
Manufacturing Standards
HEK VLVE heck Valve pplication Swg check valves are designed to close quickly and automatically with positive shut off either horizontal or vertical (flow up) pipe runs. Inherently, swg check valves have
Series Direct contact and metal-to-metal seating makes the T-pattern globe stop valve ideal for most shut-off applications.
7 YARWAY Hancock T-Pattern Globe valves Direct contact and metal-to-metal seating makes the T-pattern globe stop valve ideal for most shut-off applications Features Heavy integral stellite hardfacing on
Globe valves Shut-off check valve 200 AE/BE PN DN Globe valves Lift check valve 240 MT PN DN 10-50
Globe valves Shut-off check valve 200 AE/BE PN 10-160 DN 10-50 Globe valves Lift check valve 240 MT PN 10-160 DN 10-50 Admissible operating pressure [bar] at design temperature [ C] 1) Material PN -200-60
PETRO VALVES. Gate Globe Check VALVE CATALOGUE. Subsidiary of Petro Power UK
PETRO VALVES Gate Globe Check VALVE CATALOGUE Subsidiary of Petro Power UK 2 PETRO VALVES The company 4 GATE VALVES BOLTED BONNET from Class 150 up to Class 2500 from 2 up to 36 PRESSURE SEAL from Class
SPIRA-TROL 1/2" to 4" ANSI Two-port LEA, LFA and LLA Control Valves
1/2" to 4" ANSI Two-port LEA, LFA and LLA Description SPIRA-TROL is a range of two-port single seat globe valves with cage retained seats conforming to ASME/ANSI standards. These valves are available in
Gate valves Gate valve 700 HJ/JJ (GA PN 10-40) PN DN
Gate valves Gate valve 700 HJ/JJ (GA PN 10-40) PN 10-100 DN 50-150 Admissible operating pressure [bar] at design temperature [ C] Material PN -60-10 20 100 150 200 250 300 350 400 410 420 430 440 450 460
TECHNICAL DATASHEET Pacific CSV Cast Steel Valves
brands you trust. TECNICA DATASEET Pacific CSV Cast Steel Valves Crane ChemPharma & Energy Gate, Globe and Check Features and Benefits The new Pacific CSV valves have been redesigned to improve performance
Cast Steel Valves. General Index. Figure Number Index JENKINS -1-
Cast Valves Cast Valves SINCE 1864 General Index General Data... 2 Materials... 2 Identification... 3 Gate Valve Features... 4, 5 Globe Valve Features... 9, 10 Swing Check Valve Features... 14, 15 Pressure/Temperature
Cast Steel. Carbon and Stainless Steel Gate, Globe and Check Valves
Cast Steel Carbon and Stainless Steel Gate, Globe and Check Valves Contents Cast Steel Standard Features 3 Testing, Modifications and Accessories Standard Product Range With DSI Zy-Gear Bevel Gear Chart
HANCOCK 600 GATE, GLOBE AND CHECK VALVES FORGED STEEL
HANCOCK 600 GATE, GLOBE AND CHECK VALVES A range of ASME class 800 and 1500 reduced bore forged steel valves with screwed, socket weld, butt weld or flanged ends GATE VALVES A compact but extremely sturdy
Gate Valve (Model 1000)
Gate Valve (Model 1000) s: - 2 to 24 (50mm to 600mm) Rating: - Class 150 to Class 2500 Cast Steel Valves Flange End But-Weld End Information:- www.invacovalves.com sandesh@invacovalves.com invacovalves@gmail.com
BS 1452 Gr Gr. 420/ Gr. 420/ AB2 304 C C S S S S16. E mm
WAFER TYPE BUTTERFY VAVE SPECIFICATION FOR BS EN 1092-2 PN10 / PN16 FANGE MOUNTING FACE-TO-FACE DIMENSION TO ISO 5752 / BS 5155 / BS EN 593 EVER / WORM GEAR OPERATOR PRESSURE / TEMPERATURE RATINGS BFV-WB
SPIRA-TROL 1/2" to 4" ANSI Two-port KEA, KFA and KLA Control Valves
1/2" to 4" ANSI Two-port KEA, KFA and KLA Description SPIRA-TROL is a range of two-port single seat globe valves with cage retained seats conforming to ASME/ANSI standards. These valves are available in
Corporate Overview... 2,3. How To Order Gate Valves Globe Valves Check Valves Cryogenic Valves...
FORGED STEEL VALVES Table Of Contents Corporate Overview... 2,3 How To Order... 4-8 Gate Valves... 9-14 Globe Valves... 15-22 Check Valves... 23-30 Cryogenic Valves... 31-40 Integral Flanged Valves...
Fasani Pressure Seal Cast Gate Valves - Style A Wedge Gate and Parallel Slide
A series of robust gate valves specifically designed for applications in the power industry Features General application Our pressure seal -Style A gate valves are recommended for several applications
Distributed by: M&M Control Service, Inc brands you trust.
Distributed by: M&M Control Service, Inc. /stockham.php 800-876-0036 847-356-0566 brands you trust. STOCKHAM - Cast Valves Contents Performance in Any Application...4 How to Specify and Order Valves...4
API 6D. Complete Solutions for Engineered Valves
API D Pipele Valves Complete Solutions for Engeered Valves Cat.no.:E-PV-007 Table of Contents Introduction 1 Quality Coitment ~5 ~7 ~11 1~15 1~17 0~1 ~5 ~1 ~ 7 ~9 Products Views How to Order Design Feature
The bolted bonnet configuration achieves simultaneously the best performance and the highest safety.
The achieves simultaneously the best performance and the highest safety. Features A rugged body and bonnet design in accordance with API 600, ASME B16.34 and BS 1414. Tight shutoff performance is always
KVC VALVES AND PEX FITTINGS
KVC VALVES AND PEX FITTINGS 2011 KVC VALVES & PEX FITTINGS CATALOGUE 2 P a g e Table of contents 1. Cast Steel Valves..4 FIG. 272-CS-15 ( Gate ).....5 FIG. 272-CS-300 ( Gate )......6 FIG. 272-CS-600 (
MSA, a.s., is an important manufacturer of industrial valves from the Czech Republic, Europe. The company manufactures and sells wide range of
API Program MSA, a.s., is an important manufacturer of industrial valves from the Czech Republic, Europe. The company manufactures and sells wide range of industrial valves for transport and processing
GATE VALVES ALV-1 FORGED STEEL NOMINAL PRESSURE NOMINAL SIZE MATERIALS CONNECTIONS. ANSI Class PN /4-2 DN 8-50.
FORGED STEEL GTE VLVES LV-1 NOMINL PRESSURE NSI Class 150-1500 PN 16-250 NOMINL 1/4-2 DN 8-50 MTERILS Carbon Steel Low lloy Steel Stainless Steel CONNECTIONS Socket Weld Butt Weld Threaded Flanged XELVLVES
KE Series. Through Conduit, Double Expanding Gate Valves
KE Series Through Conduit, Double Expanding Gate Valves The KE Series is an advanced API 6D designed gate valve that provides a tight mechanically activated seal. It has double sealing, bi-directional
GA-1601B (EN) GATE VALVE
GA101B (EN) GATE VALVE ABOUT US FBV Inc. is an ISO 9001 certified company specializing in manufacturing industrial valves including ball valves, gate valves, globe valves, check valves, plug valves and
International Standard Valve, Inc. Slab and Expanding Gate Valves
International Standard Valve, Inc. TM ISV Series GTDS & GTDE Slab and Expanding Gate Valves 2 through 36 ASME Class 150-2500 Top Entry Bolted Body Flanged & Weld Ends API 6D Fire Safe Design NACE is a
CAST BODY WEDGE GATE VALVES
CAST BODY WEDGE GATE VAVES FIG. 20-150, STAINESS STEE - CASS 150 D e s i g n F e a t u r e s ocking handwheel nut. Provision for lockout lanyard. TFE impregnated packing for temperature to 450 o F/232
ANSI VALVE CATALOGUE
ANSI VAVE CATAOGUE GATE VAVES GOBE VAVES CHECK VAVES BA VAVES BUTTERFY VAVES SYSTEMS AND PRODUCTS FOR INDUSTRIA CARGO TRANSFER AND STORAGE ANSI VAVE CATAOGUE Introuction CTS has evelope itself into a reputable
GL-1601C (EN) GLOBE VALVE
GL1C (EN) GLOBE VALVE ABOUT US FBV Inc. is an ISO 9001 certified company specializing in manufacturing industrial valves including ball valves, gate valves, globe valves, check valves, plug valves and
UREA SERVICE FORGED VALVES
UREA SERVICE FORGED VALVES 288 UREA SERVICE VALVES 289 UREAvalves DROP CHECK VALVE UREA SERVICE PN325 1/2 to 2 DOUGLAS CHERO DROP CHECK VALVE UREA SERVICE DROP CHECK VALVE UREA SERVICE PN325 : PN325 Drop
Series Direct contact, metal-to-metal seating, make the globe valve ideal for most shut-off applications. Features
Direct contact, metal-to-metal seating, make the globe valve ideal for most shut-off applications. Features General application Designed for ASME boiler and pressure vessel code, section I applications
VALVES AIL CAST STEEL GATE, GLOBE & CHECK AUDCO INDIA LIMITED. ASME Class mm mm (2-60 ) API 600 BS 1873 BS 1868 API 603
AIL CAST STEEL GATE, GLOBE & CHECK VALVES ASME Class 150-2500 50mm - 1500mm (2-60 ) API 600 BS 1873 BS 1868 API 603 ASME B16.34 API 6D AUDCO INDIA LIMITED Introduction AIL Cast Steel Gate, Globe and Check
w w w.fastwell.in FORGED STEEL VALVES GATE, GLOBE & CHECK PRESSURE CLASS: ASME SIZE RANGE : 1/4-3 API STANDARDS : 602 ASME B16.
A trusted name in industrial valve company FORGED STEEL VALVES GATE, GLOBE & CHECK PRESSURE CLASS: ASME 150-2500 SIZE RANGE : 1/4-3 API STANDARDS : 602 ASME B16.34 CATALOG NUMBER FFI -1004 TABLE OF CONTENTS
Cast Steel Valves. General Index. Figure Number Index -1-
Cast Valves General Index Cast Valves Ordering Information... 2 General Data... 3 Materials... 4 Identification... 5 General Features... 6 Gate Valve Features... 7 NACE Trim Valves...11 Globe Valve Features...12
Wellhead Valves. DHV Industries,Inc. DHV Valve Company Inc.
DHV Industries,Inc. 3451 Pegasus Drive, Bakersfield. CA 93308 U.S.A. Call TollFree: (887) DHV-USA1 Phone: (661) 392-8948 Fax: (661) 392-8947 E-mail: sales@dhvindustries.com Website: www.dhvindustries.com
CAST STEEL VALVES. 150# 300# 600# Gate Globe Check. 4Evergreen Valve
CST STEE VVES 150# 300# 600# Gate Globe Check 4Evergreen Valve 4E is a Texas corporation valve company which was founded in 1993 by a group of enthusiastic people with more than years of serving in the
88A-100 Series. Carbon Steel ANSI Class 150 Flanged Std. Port Ball Valve - 1-1/2 through 2 STANDARDS COMPLIANCE STANDARD FEATURES
Carbon Steel ANSI Class 150 Flanged Std. Port Ball Valve - 1-1/2 through 2 2. Retainer ASTM A108 Type 1215 3. Ball ASTM A108 Type 1215 Chrome Plated 9. Gland Plate 302 or 304 SS 10. Stem Nut 316 SS 11.
STANDARDS and SPECIFICATIONS
ANSI (American National Standards Institute) ANSI B31.4 - Liquid petroleum transportation piping system. ANSI B31.4 - Gas transmission and distribution piping system. API (American Petroleum Institute)
Features and Description of Edward Univalve Globe Valves
Features and Description of Edward Univalve Globe Valves 7. 8. 9. 1 10. 2. 11. 12. 3. 4. 5. 6. 1. Stem has ACME threads, is ground to a fine finish and is hardened to resist wear. 2. Yoke bushing material
T 8075 EN Type 3591 Globe Valve ANSI version
T 8075 EN Type 3591 Globe Valve ANSI version Application Matenance-friendly cage valve for process engeerg applications with high dustrial requirements Valve size NPS 10 to 32 Pressure ratg to 900 Temperatures
YARWAY HANCOCK Y-PATTERN FORGED STEEL GLOBE STOP VALVES SERIES 4000
Direct contact and metal-to-metal seating make this Y-pattern globe stop valve ideal for most shut-off applications. FEATURES All valves feature integral Stellite hardfacing on both body and disc seating
GWC Italia. Proven technology for individual valve solutions worldwide FSV-1005
GWC Italia Proven technology for individual valve solutions worldwide forged STEEL VALVES GATE, GLOBE & CHECK FSV-1005 2 GWC ITALIA Proven technology for individual valve solutions worldwide w w w. g w
Full Opening Swing CHECK VALVE - API 6D
Full Opening Swing CHECK VALVE - API 6D Table of Contents: Manufacturing Range 3 Features & Benefits 4 Drawings 6 Sizes & Dimensions 8 Pressure / Temperature Reference 14 Flow Coefficients (Cv) 14 How
Gate, Globe & Check Valves Corrosion-resistant
Gate, Globe & Check Valves Corrosion-resistant ASME Class 0 to 00 " - " (0 mm - 00 mm) API 0, ASME B. L&T Valves Trusted by the industry for over five decades, L&T Valves offers innovative products and
Trunnion Mounted Ball Valve. Trunnion Mounted Ball Valve NEWAY VALVE. Complete Solutions for Industrial Valves. Cat.no.
Cat.no.:E-TMBV-205 Trunnion Mounted Ball Valve Complete Solutions for Industrial Valves NEAY VAVE Cat.no.:E-FBV Cat.no.:E-TMBV Cat.no.:E-TOV Cat.no.:E-OV Cat.no.:E-GGC Cat.no.:E-AV Trunnion Mounted Ball
FASANI PRESSURE SEAL CAST GLOBE VALVES - STYLE B Y AND T PATTERN
A wide range of globe valves specifically designed for high pressure and high temperature applications, where low pressure loss is required. FEATURES GENERAL APPLICATION Our pressure seal globe valves
About us KAV FGGC14 KAVAL FORGED GATE, GLOBE AND CHECK VALVES
FORGED GATE, GOBE AND CHECK VAVES About us KAVA is a Canadian valve fabricator, providing customers with gate, globe, check, as well as floating and trunnion ball valves, etc. of a complete range of sizes
FIGURE NO. VALVE TYPE PRESSURE CLASS CONNECTIONS SIZE RANGE PAGE NO. 28 Stop Check Valve 300 Flanged 3" 10" 30
Cast Valves General Index Cast Valves Figure Number Index Ordering Information... 2 General Data... 3 Materials... 4 Identification... 5 General Features... 6 Gate Valve Features... 7 NACE Trim Valves...11
Carbon and Low Alloy Steel Valves. ASME Class 150/300/600/900/1500/2500 Gate, Globe and Check Valves, Bolted Bonnet Design
Carbon and Low Alloy Steel Valves ASME Class 150/300/600/900/1500/2500 Gate, Globe and Check Valves, Bolted Bonnet esign INEX Profile of KITZ Cast Carbon Steel Valves...1 Standard Product Range...2 Standard
Cast Steel Globe Valve
www.itek.com 07 Category Globe Valve - BS1873-Specification Cast Steel Globe Valve Figure:DIDTEKCSGLV Ditek Cast steel Globe Valves are manufacture to the latest eitionof BS1873an teste to API Stanar 598.
ANSI GATE, GLOBE AND CHECK VALVES & STRAINERS
ANSI GATE, GLOBE AND CHECK VALVES & STRAINERS INDEX 2 8 16 20 32 36 44 50 54 58 62 66 78 THE COMPANY CAST GATE VALVES CAST GATE VALVES PRESSURE SEAL CAST GLOBE VALVES CAST GLOBE VALVES PRESSURE SEAL CAST
Vogt Valves The Connection Bulletin for Forged Steel Globe Valves for Water-Free Chlorine Service Class 300, 600 & 800 CB 07
The Connection Bulletin for Forged Steel Globe Valves for Water-Free Chlorine Service Class 300, 600 & 800 CB 07 Forged Steel Globe Valves for Water-Free Chlorine Service Flow Control Division Forged Steel,
Valves for building. Y-strainers... page 204 PVC valves Ball valves... page 204 Butterfly valve... page 204 Ball check valve...
Valves for building Ball valves PN25/20... page 194 PN30/20... page 195 PN40/30 - Lead-free brass... page 196 Valve for gas... page 197 Stem extension valves... page 197 3 way valves... page 197 Mini valves...
TABLE OF CONTENTS FORGING AHEAD OF THE REST
ORGED STEEL VLVES YO Valve Co., Ltd ddress: NO. 111, CaoliRoad, engjing Town,Jinshan District,Shanghai, China. TEL: 86-21-67360922 X: 86-21-67360966 Post Code: 201502 E-Mail: info@yaaovalve.com Website:http://www.yaaovalve.com
FIGURE NUMBER SYSTEM Note: For example:
GATE VAVE SERIES 0P FIGURE NUMBER SYSTEM Steel Gate Valve Figure Number System 5 7 xxin xx Operation type Bare Stem ChainWheel Operated Spur Gear Operated 5Cone Gear Opearted 9 Operated (omit) Valve Type
Bolted bonnet configuration
The bolted bonnet type valves are manufactured to guarantee the highest performance in the widest spectrum of oil and gas applications Features Swing check valves can fit on both horizontal and vertical
87A-200 Series. Stainless Steel ANSI Class 150 Flanged Full Port Ball Valve - 1/2 through 1 STANDARD FEATURES STANDARDS COMPLIANCE
Description (1/2 & 3/4 Valves) 2. Retainer ASTM A276 Type 316 3. Ball ASTM A276 Type 316 8. Stem Nut 300 Series Stainless Steel 9. Lever 300 Series Stainless Steel w/ Vinyl Grip 10. Stem Bearing RPTFE
WENZHOU BAIJI VALVE CO.,LTD
API valves Cataloge 2006 All rights reserved by Wenzhou Baiji Valve Co.,Ltd CN. API 600 CAST STEEL VALVES COMPANY INTRODUCTION Wenzhou Baiji Valve Co.,LTD. BJ VALVES, is a diversified global supplier of
Cast Steel Valves. General Index. Figure Number Index
Cast Valves General Index Ordering Information... 2 General Data... 3 Materials... 4 Identification... 5 General Features... 6 Gate Valve Features... 7 NACE Trim Valves... 11 Globe Valve Features... 12
VMA Presentation Pressure Seal (MSS-SP-144) and ASME B Update Carlos E. Davila, PE March 2014
VMA Presentation Pressure Seal (MSS-SP-144) and ASME B16-2013 Update Carlos E. Davila, PE March 2014 CRANE FLUID HANDLING Fugitive Emissions Update EPA has been reducing the allowable fugitive emissions
Valves for building. Y-strainers... page 272 PVC valves Ball valves... page 272 Butterfly valves... page 272 Ball check valves...
Valves for building Ball valves PN25/20... page 262 PN30/20...pages 262 to 263 PN40/30 - Lead-free brass... page 264 Valve for gas... page 265 Stem extension valves... page 265 3 way valves... page 265
Carbon Steel ANSI Class 150 Flanged Full Port Ball Valve -
Description (1/2 & 3/4 Valves) Material 2. Retainer ASTM A108 Type 1215 3. Ball ASTM A108 Type 1215 8. Stem Nut 300 Series Stainless Steel 9. Lever 300 Series Stainless Steel w/vinyl Grip 10. Stem Bearing
Condensed Valve Guide Gate Globe Check Ball Strainer. Warren Valve - Quality Since 1963
800.231.6969 Condensed Valve Guide Gate Globe Check Ball Strainer Warren Valve - Quality Since 1963 Gate, Globe & Check Valves #1156 #2156 #3156 Gate Globe Check Pressures Class Figure 150 - #1156 300
SECTION VALVES PART 1 - GENERAL
1.01 RELATED DOCUMENTS SECTION 15100 VALVES PART 1 - GENERAL A. The work in this section includes the furnishing and installation of all control valves and accessories shown on the construction plans and
brands you trust. CRANE - Cast Steel Valves Crane ChemPharma & Energy
brands you trust. CRANE - Cast Steel Valves Features & Benefits Key Features & Benefits All seat rings are seal welded as standard Quality process fully documented, materials fully traceable Full range
PRODUCT OVERVIEW. Our BDB (Bolted Body) and BW3 (Fully Welded Body) trunnion-mounted ball valves are designed and manufactured
PRODUCT OVERVIEW For over 30 years, FluoroSeal has been manufacturing and customizing a wide range of valves, and accessories for many industries including Oil & Gas, Petrochemical, Chemical, Mining, Pharmaceutical,
Technology in full flow
Technology in full flow I V V H T nspired by the mission of offering worldclass solutions in the area of Flow Control, a group of experienced engineers with decades of cumulative experience in design and
CV3000 Series Pressure-Balanced Cage type Control Valve
No. SS2-ACP110-0100 OVERVIEW The model ACP pressure-balanced cage type control valves are designed for heavy duty service. The valve plug employs a pressure balance function to control high differential
TRUNNION BALL VALVES. TBV 7.10
TRUNNION BALL VALVES WWW.VALVE.COM TBV 7.10 ABOUT US Our mission at Universal Flow (), is to provide a quality product at a competitive price and to meet the needs and requirements of our customers in