Equipment for Food manufacturing processes FP series

Transcription

1 Equipment for Food manufacturing processes FP series Various needs on food production processes have shaped our products. Equipment for Food manufacturing processes FP series CC-1271A 1

2 Equipment for food manufacturing processes FP series ch o sear ct t y s a E o sele e t y s a E to us y s a E A wide range of offerings from air filters to actuators which can be used safely and securely in food manufacturing processes are available as standard FP1 Eliminates concerns of contamination due to lubricant! Lubricants Lubricants Material FP2 CKD delivers Safe & Secure Safe materials too! Lubricants Material Shape Environment Structure Environment FP3 Further enhanced safety! Lubricants Material Structure Environment Shape This logo represents CKD's stance to provide you with safe components for supporting your food manufacturing processes.

3 Equipment for food manufacturing processes FP series tes to u b i r t Con 22 FSSC cation! i certif We provide total support for your food manufacturing processes with our comprehensive engineering capability in packaging, pneumatics, fluid control and motors FP1 FP2 FP3 Food grade lubricant (NSF H1) is used for flow paths and sliding parts. In addition to the features of FP1, materials conforming to the Food Sanitation Act (resin/rubber) are used for the flow path part. * Materials and dimensions are the same as standard products. * Materials and dimensions (except for the flow path part) are the same as standard products. In addition to the features of FP2, its lubricants, materials, shapes, etc. are even more suitable for food manufacturing processes. Cylinder Solenoid valve Flow path part Sliding part Cylinder valve Diaphragm type cylinder valve All parts electro-polished Sliding part Flow path part Filter/regulator Sliding part Secondary side outlet buffed Flow path part LRV 8 Rotary valve Sliding part Flow path part Bacteria Removing filter Sliding part Flow path part * Notification No. 37 of Ministry of Health, Labour, and Welfare, Specifications and Standards for Food and Food Additives, etc., under Food Sanitation Act (1959)

4 Equipment for food manufacturing processes FP series FP1 Prevents food contamination caused by lubricant. Food grade lubricant (NSF H1) is used. Pencil shaped cylinder Medium bore size cylinder Medium bore size cylinder (stainless steel) Round shaped cylinder Tie rod air cylinder SCPD3 CMK2 CMK2J SCM SCG Medium bore size cylinder, tie rod type Large bore size cylinder Compact cylinder Guided cylinder Rodless cylinder SCA2 SCS2 SSD2 STG-M SRL3 P1 P25 P5 P31 P11 P35 P15 P21 P45 P41 Floating joint Feather hand (mini-parallel hand) Compact cross roller parallel hand Compact wide parallel hand Feather hand (mini-fulcrum hand) FJ FH1 BHA/BHG HMF FH5 P51 P53 3-way jaw bearing chuck Powerful chuck Powerful chuck 3/4/5-port pilot operated valve Filter/regulator CKG CKL2 CKLG2 4G P63 P65 W1*W8* P49 P61 P57 P59 P73 P139 Air filter Oil mist filter Regulator Reed switch type compact pressure switch Shut-off valve F1F8 M(X)1M(X)8 R1*R8* P11P81 P143 P145 P149 P153 V1/ V3/ V31/ V61/ P155 High polymer membrane dryer Digital electro-pneumatic regulator SU/SD EVD P159 P167 Speed controller with adjusting dial Speed controller, inline with push-in fitting Needle valve with adjusting dial Miniature speed controller Speed controller DSC SCL2 DVL-S SC-M5 SC1 P175 P177 P181 P183 P184 Fittings GW P171 Fittings(stainless-steel) Speed controller, elbow with push-in fitting ZW SC3W P172 P173

5 Equipment for food manufacturing processes FP series Metering valve with silencer Block valve Quick valve Discrete type ejector Pilot kick type 2-port solenoid valve SMW/ SMW2 FPV 2QV/3QV VSH/VSC APK P189 P191 P193 P195 Air operated 2-port valve Air operated 3-port valve Medium main line filter SAB NAP P197 P199 P185 AF P21 FP2 Materials conforming to the Food Sanitation Act are used. Suction pad VSP P23 Pilot operated 2-port solenoid valve for compressed air Compact pilot operated solenoid valve for water Compact direct acting 2/3-port solenoid valve Direct acting 2-port solenoid valve (general purpose valve) EXA FWD USB/G AB31/41 P25 P27 P29 P215 Direct acting 3-port solenoid valve (general purpose valve) Pilot operated 2-port solenoid valve for dry air (general purpose valve) Diaphragm type cylinder valve Diaphragm type cylinder valve Diaphragm type cylinder valve, manifold AG31/41/ 33/43/ 34/44 ADK11-Z LAD NAD GNAD P223 P225 P227 P228 P217 Compact rotary valve Oil-free motor driven 2-port ball valve Pilot kick type 2-port solenoid valve for steam Metal free solenoid valve High corrosion resistant direct acting 2-port solenoid valve CHB/ CHG MXB/ MXG SPK MYB3 HB P235 P237 P238 P229 P231 Standard model supports.... P239 Contact CKD for details.... P24 Related products... P243

6 Pencil shaped cylinder SCPD3-FP1 Bore size: φ 6/φ 1/φ 16 NSF H1 Pneumatic Cylinders I Catalog No. CB-29SA Specifications SCPD3 SCPD3-L Bore size mm φ 6 φ 1 φ 16 Actuation Working fluid Double acting Compressed air Max. working pressure MPa 1. Min. working pressure MPa.15.1 Proof pressure MPa 1.6 Ambient temperature C -1 to 6 (no freezing) Port size Stroke tolerance mm M5 +1. Working piston speed mm/s 5 to 75 Cushion Lubrication Rubber cushion Not required Max. energy absorption J Note 1: Described in above is specification of double acting/single rod. Each description varies depending on variation. Refer to Pneumatic Cylinders I (CB-29SA) for details. Stroke (variation: blank, L, Z, ZL, M, ML, K, KL) Bore size (mm) Standard stroke (mm) Max. stroke (mm) Available stroke (mm) Min. stroke (mm) φ φ 1 15/3/45/ φ Note 1: Custom stroke is available per mm. Note 2: Any of variation Z, ZL, M, ML doesn't have bore size 6. Stroke (variation: D, DL) Bore size (mm) Standard stroke (mm) Max. stroke (mm) Min. stroke (mm) φ 6 6 φ 1 15/3/45/ φ 16 Note 1: Custom stroke is available per mm. 1

7 How to order Without switch SCPD3 Z 1 15 O FP1 Y With switch SCPD3 ZL 1 15 O T2H R FP1 Y Model No. A Variation B Mounting style Note 1 C Bore size D Stroke SCPD3-FP1 How to order Code A Variation Bore size Blank Double acting/single rod L Double acting/single rod/switch D Double acting/double rod DL Double acting/double rod/switch Z Double acting/integrated speed controller ZL Double acting/integrated speed controller/switch M Double acting/non-rotation ML Double acting/non-rotation type/switch K Double acting/high load KL Double acting/high load/switch B Mounting style Bore size Basic LS Axial foot (single) rod end FA Rod end flange CB Clevis bracket (pin and snap ring included) C Bore size (mm) 6 φ 6 1 φ 1 16 φ 16 D Stroke (mm) Refer to the stroke table on page 1. FP1 FP2 Note on model No. selection Note 1: "CB" mounting style is not available when the port direction is "" (axial direction). Note 2: Refer to Pneumatic Cylinders I (CB-29SA) for min. stroke with switch. Note 3: Magnet is not built in the type without switch. Note 4: "I" and "Y" cannot be selected simultaneously. Note 5: Switches are shipped with the product. E Head end port direction Note 1 [Example of model No.] SCPD3-ZL O-T2H-R-FP1Y Model No.: pencil shaped cylinder, grade grease specifications for food A Variation : Double acting/integrated speed controller/switch B Mounting style : Basic C Bore size : φ 1 mm D Stroke : 15 mm E Head end port direction : Axial direction F Switch model No. : Proximity T2H switch, lead wire 1 m G Switch : 1 (on rod end) H Accessory : Rod clevis F Switch model No. Note 3, Note 5 * indicates lead wire G Switch quantity H Accessory Note 4 E Head end port direction Blank O Vertical Shaft direction F Switch model No. Lead wire straight Lead wire L-shaped Contact Voltage Lead Indicator AC DC wire TH* TV* 1 color display Reed T5H* T5V* No indicator lamp T2H* T2V* 1 color T3H* T3V* display 3 line Proximity T2WH* T2WV* 2 color T3WH* T3WV* display 3 line * Lead wire Blank 1 m (standard) 3 3 m (option) 5 5 m (option) G Switch quantity R H D 2 T 3 H Accessory I Y B1 B2 1 (on rod end) 1 (on head end) Bore size Rod eye Rod clevis (pin and snap ring included) Eye bracket Clevis bracket 2

8 SCPD3-FP1 How to order mounting bracket Bore size (mm) Mounting bracket φ 6 φ 1 φ 16 Foot (LS) P2-LS-6 P2-LS-1 P2-LS-16 Flange (FA) P2-FA-6 P2-FA-1 P2-FA-16 Note : The foot (LS) mounting bracket is provided as 1 pc./set. 3

9 FP1 FP2 MEMO 4

10 Medium bore size cylinder CMK2-FP1 Bore size: φ 2/φ 25/φ 32/φ 4 NSF H1 Pneumatic Cylinders I Catalog No. CB-29SA Specifications CMK2 Bore size mm φ 2 φ 25 φ 32 φ 4 Working fluid Compressed air Max. working pressure MPa 1. Min. working pressure MPa.1 Proof pressure MPa 1.6 Ambient temperature C -1 to 6 (no freezing) Port size Rc1/8 Stroke tolerance mm ( 2), (>2) Working piston speed mm/s 5 to 5 Cushion Rubber cushion Lubrication Not required Max. energy absorption J Note 1: Described in above is specification of double acting/single rod. Each description varies depending on variation. Refer to Pneumatic Cylinders I (CB-29SA) for details. Stroke Variation: Blank, R, C, B, M, Z, G2, G3, Air cushion: *C Max. stroke (mm) Standard stroke Bore size (mm) (mm) φ 2 φ 25 φ 32 φ 4 25/5/75/1/ 15/2/25/ 3 No bellows Min. stroke (mm) No bellows Bellows Bellows "L" Bellows"J" Note 1: Custom stroke is available per mm. Note 2: Single foot (LS) has the max. stroke of 5 mm. Note 3: Contact CKD when the stroke shorter than 25 mm is necessary for "J" bellows. Note 4: Variations G2 and G3 don't support with bellows. Variation: S, SR Bore size (mm) Standard stroke (mm) Max. stroke (mm) Min. stroke (mm) No No bellows Bellows bellows Bellows "L" Bellows"J" φ 2 25/5/75/1/15 φ φ 32 25/5/75/1/ φ 4 15/2 Note 1: Custom stroke is available per mm. Note 2: Single foot (LS) has the max. stroke of 5 mm. Note 3: Contact CKD when the stroke shorter than 25 mm is necessary for "J" bellows. Variation: P Bore size (mm) Standard stroke Max. stroke (mm) Min. stroke (mm) (mm) No bellows Bellows No bellows Bellows φ 2 φ 25 25/5/75/1/15/ 43 φ 32 2/25/ φ 4 4 Note 1: Custom stroke is available per mm. Note 2: Single foot (LS) has the max. stroke of 5 mm. Note 3: Contact CKD when stroke is shorter than 25 mm. Variation: D Bore size (mm) Standard stroke (mm) φ 2 25/5/75/1/ φ /2/25/ φ 32 3 φ 4 45 Max. stroke (mm) Min. stroke (mm) No No bellows Bellows bellows Bellows "L" Bellows"J" Note 1: Custom stroke is available per mm. Note 2: Single foot (LS) has the max. stroke of 5 mm. Note 3: Contact CKD for each case, when the stroke shorter than 25 mm is necessary for "J" bellows. 5

11 How to order CMK2-FP1 How to order Without switch CMK2 With switch CMK2 M M A Variation 2 1 FP1 Y 2 1 TH R V FP1 B Mounting style Note 1 E Stroke Note 1 C Bore size D Port thread type Note on model No. selection Note 1: Single foot (LS) has the max. stroke of 5 mm. Note 2: Refer to Pneumatic Cylinders I (CB-29SA) for min. stroke with switch. Note 3: The instantaneous max. temperature is that at which sparks, swarf, etc., instantaneously contact bellows. Note 4: "I" and "Y" cannot be selected simultaneously. Note 5: Refer to Pneumatic Cylinders I (CB-29SA) for custom specifications of rod end form. Note 6: Refer to Pneumatic Cylinders I (CB-29SA) for combination of variations/options. Note 7: Up to 3 switches can be mounted. If more than four switches are required, switch mounting brackets for the extra switches must be prepared separately. Note 8: For 2 or 25 bore size, the rod is stainless steel as standard and the rod nut is zinc chromate. If the stainless steel rod nut is necessary, select the "M" option. Note 9: Option M cannot be selected, when either of variation G2 or G3 is selected. [Example of model No.] CMK2-M--2-1-TH-R-VFP1Y F Switch model No. Model No.: Medium bore size cylinder, grade grease specifications for food A Variation : Double acting/non-rotation B Mounting style : Basic C Bore size : φ 2 mm D Port thread type : Rc thread E Stroke : 1 mm F Switch model No. : Reed TH switch, lead wire 1 m G Switch quantity : 1 (on rod end) H Option : Boss cut off I Accessory : Rod clevis G Switch quantity Note 7 H Option Note 3 I Y Accessory Note 4 Code A Variation Blank Double acting/single rod S Single acting/push SR Single acting/pull C Double acting/air cushioned D Double acting/double rod M Double acting/non-rotation Z Double acting/integrated speed controller G2 Double acting/coolant proof (packing seal material NBR) G3 Double acting/coolant proof (packing seal material FKM) B Mounting style Basic LB Axial foot (both sides) LS Axial foot (single) FA Rod end flange FB Head end flange CA Eye bracket CC Eye bracket integrated CC1 Eye bracket, bush pressfit CB Clevis bracket (pin and split washer pin included) TA Rod end trunnion TB Head end trunnion C Bore size (mm) 2 φ 2 Note 8 25 φ 25 Note 8 32 φ 32 4 φ 4 D Port thread type Blank Rc thread NN NPT thread (custom order product) GN G thread (custom order product) E Stroke (mm) Refer to the stroke table on page 5. F Switch model No. Refer to the switch model No. on page 1. G Switch quantity R 1 (on rod end) H 1 (on head end) D 2 T 3 H Option Max. ambient temperature Instantaneous max. temperature J Bellows 1 C 2 C L Bellows 25 C 4 C M Piston rod material (stainless steel) Note 8/Note 9 V Boss cut off I Accessory I Rod eye Y Rod clevis (pin and split washer pin included) B2 Clevis bracket (pin and snap ring included) FP1 FP2 6

12 CMK2-*C-FP1 How to order Without switch CMK2 2 C 1 V FP1 With switch CMK2 2 C 1 TH R V Model No. A Mounting style Note 1 Rubber air cushioned B Bore size C Port thread type Note on model No. selection D Stroke Note 1 Note 1: Single foot (LS) has the max. stroke of 5 mm. Note 2: Refer to Pneumatic Cylinders I (CB-29SA) for min. stroke with switch. Note 3: The instantaneous max. temperature is that at which sparks, swarf, etc., instantaneously contact bellows. Note 4: "I" and "Y" cannot be selected simultaneously. Note 5: Refer to Pneumatic Cylinders I (CB-29SA) for custom specifications of rod end form. Note 6: Refer to Pneumatic Cylinders I (CB-29SA) for combination of variations/options. Note 7: Up to 3 switches can be mounted. If more than four switches are required, switch mounting brackets for the extra switches must be prepared separately. Note 8: For 2 or 25 bore size, the rod is stainless steel as standard and the rod nut is zinc chromate. If the stainless steel rod nut is necessary, select the "M" option. [Example of model No.] CMK2--2C-1-TH-R-VFP1Y Model: Medium bore size cylinder with rubber air cushion, grade grease specifications for food A Mounting style : Basic B Bore size : φ 2 mm C Port thread type : Rc thread D Stroke : 1 mm E Switch model No. : Proximity TH switch, lead wire 1 m F Switch quantity : 1 (on rod end) G Option : Boss cut off H Accessory : Rod clevis FP1 E Switch model No. * indicates the lead wire F Switch quantity Note 7 G Option Note 3 Y Y H Accessory Note 4 Code A Mounting style Basic LB Axial foot (both sides) LS Axial foot (single) FA Rod end flange FB Head end flange CA Eye bracket CC Eye bracket integrated CC1 Eye bracket, bush pressfit CB Clevis bracket (pin and split washer pin included) TA Rod end trunnion TB Head end trunnion B C D Bore size (mm) 2 φ 2 Note 8 25 φ 25 Note 8 32 φ 32 4 φ 4 Port thread type Blank Rc thread N NPT thread (custom order product) G G thread (custom order product) Stroke (mm) Refer to the stroke table on page 5. E Switch model No. Lead wire Lead wire Voltage Lead Display straight L-shaped AC DC wire TH* TV* 1 color display T5H* T5V* No indicator lamp T8H* T8V* 1 color display T1H* T1V* T2H* T2V* 1 color display T3H* T3V* T3PH* T3PV* 1 color display type 3 line (custom) T2WH* T2WV* T2YH* T2YV* 2 color display T3WH* T3WV* 3 line T3YH* T3YV* T2JH* T2JV* Contact Reed Proximity * Lead wire Blank 1 m (standard) 3 3 m (option) 5 5 m (option) F G H Switch quantity R 1 (on rod end) H 1 (on head end) D 2 T 3 Option 1 color display off-delay Max. ambient temperature Instantaneous max. temperature J Bellows 1 C 2 C L Bellows 25 C 4 C M Piston rod material (stainless steel) Note 8 V Boss cut off Accessory I Rod eye Y Rod clevis (pin and split washer pin included) B2 Clevis bracket (pin and snap ring included) 7

13 How to order CMK2-FP1 How to order Without switch CMK2 P M FP1 With switch CMK2 P TH D M FP1 I A Variation B Mounting style Note 1 Note on model No. selection Note 1: Single foot (LS) has the max. stroke of 5 mm. Note 2: Refer to Pneumatic Cylinders I (CB-29SA) for min. stroke with switch. Note 3: The instantaneous max. temperature is that at which sparks, swarf, etc., instantaneously contact bellows. Note 4: "I" and "Y" cannot be selected simultaneously. Note 5: Refer to Pneumatic Cylinders I (CB-29SA) for custom specifications of rod end form. Note 6: Refer to Pneumatic Cylinders I (CB-29SA) for combination of variations/options. Note 7: Up to 3 switches can be mounted. If more than four switches are required, switch mounting brackets for the extra switches must be prepared separately. Note 8: For 2 or 25 bore size, the rod is stainless steel as standard and the rod nut is zinc chromate. If the stainless steel rod nut is necessary, select the "M" option. [Example of model No.] CMK2-P TH-D-MFP1I C Bore size D Port thread type E Stroke F Adjustable stroke range Model No.: Medium bore size cylinder, grade grease specifications for food A Variation : Double acting/stroke adjustable (push) B Mounting style : Basic C Bore size : φ 32 mm D Port thread type : Rc thread E Stroke : 1 mm F Adjustable stroke range : 25 mm G Switch model No. : Reed TH switch, lead wire 1 m H Switch quantity : 2 I Option : Piston rod material stainless steel J Accessory : Rod eye G Switch model No. H Switch quantity Note 7 I Option Note 3 I Code A Variation P Double acting/stroke adjustable (push) R Double acting/stroke adjustable (pull) B C Mounting style Basic LB Axial foot (both sides) LS Axial foot (single) FA Rod end flange FB Head end flange TA Rod end trunnion TB Head end trunnion Bore size (mm) 2 φ 2 Note 8 25 φ 25 Note 8 32 φ 32 4 φ 4 Port thread type Blank Rc thread NN NPT thread (custom order product) GN G thread (custom order product) D E F Stroke (mm) Refer to the stroke table on page 5. Adjustable stroke range (mm) G Switch model No. Refer to the switch model No. on page 1. H I J Switch quantity R 1 (on rod end) H 1 (on head end) D 2 T 3 Option J Accessory Note 5 Max. ambient temperature Instantaneous max. temperature J Bellows 1 C 2 C L Bellows 25 C 4 C M Piston rod material (stainless steel) Note 8 Accessory I Rod eye Y Rod clevis (pin and split washer pin included) B2 Clevis bracket (pin and snap ring included) FP1 FP2 8

14 CMK2-FP1 How to order Without switch CMK2 With switch CMK2 B A Variation C Bore size Note on model No. selection Note 1: Refer to Pneumatic Cylinders I (CB-29SA) for min. stroke with switch. Note 2: The instantaneous max. temperature is that at which sparks, swarf, etc., instantaneously contact bellows. Note 3: Refer to Pneumatic Cylinders I (CB-29SA) for custom specifications of rod end form. Note 4: Refer to Pneumatic Cylinders I (CB-29SA) for combination of variations/options. Note 5: As a spacer is used for port adjustment in the back to back, the X and M dimensions include to 1.5 mm tolerance. Note 6: Up to 3 switches can be mounted. If more than four switches are required, switch mounting brackets for the extra switches must be prepared separately. Note 7: For 2 or 25 bore size, the rod is stainless steel as standard and the rod nut is zinc chromate. If the stainless steel rod nut is necessary, select the "M" option. [Example of model No.] CMK2-B TH-D-5-TH-R-JFP1I Cylinder 2 stroke S J FP1 I B Mounting style Cylinder 1 stroke S1 B 2 25 TH D 5 TH R Cylinder 1 D Port thread type Model No.: Medium bore size cylinder, grade grease specifications for food A Variation : Double acting, back to back B Mounting style : Basic C Bore size : φ 2 mm D Port thread type : Rc thread E Stroke (S1) : 25 mm F Switch model No. (S1) : Reed TH switch Lead wire 1 m G Switch quantity (S1) : 2 1st step stroke 25 mm (S1) + 2nd step stroke 5 mm (S2) Total stroke 75 mm (S1 + S2) S1 E Stroke (S2) : 5 mm F Switch model No. (S2 ): Reed TH switch, lead wire 1 m G Switch quantity (S2) : 1 (on rod end) H Option : Bellows, max. ambient temperature 1 C, instantaneous max. temperature 2 C I Accessory : Rod eye Cylinder 2 E Stroke E Stroke Note 1 F Switch model No. F Switch model No. G Switch quantity Note 6 J G Switch quantity H Option Note 2 S2 FP1 I I Code A Variation B Double acting/back to back Switch quantity R 1 (on rod end) H 1 (on head end) D 2 T 3 Option Accessory B Mounting style Basic LB Axial foot (both sides) FA Rod end flange C Bore size (mm) 2 φ 2 Note 7 25 φ 25 Note 7 32 φ 32 4 φ 4 D Port thread type Blank Rc thread NN NPT thread (custom order product) GN G thread (custom order product) E Stroke (mm) Refer to the stroke table on page 5. F Switch model No. Lead wire Lead wire Voltage Lead Display straight L-shaped AC DC wire TH* TV* 1 color display 2 T5H* T5V* No indicator lamp line T8H* T8V* 1 color display T1H* T1V* T2H* T2V* 1 color display T3H* T3V* 3 line T3PH* T3PV* 1 color display (custom) 3 line T2WH* T2WV* T2YH* T2YV* 2 color display T3WH* T3WV* 3 line T3YH* T3YV* T2JH* T2JV* 1 color display off-delay * Lead wire Blank 1 m (standard) 3 3 m (option) 5 5 m (option) G H I Contact Reed Proximity Max. ambient temperature Instantaneous max. temperature J Bellows 1 C 2 C L Bellows 25 C 4 C M Piston rod material (stainless steel) Note 7 Accessory I Rod eye Y Rod clevis (pin and split washer pin included) B2 Clevis bracket (pin and snap ring included) 9

15 Switch model No. Variation: Blank, S, SR, C, D, M, Z, B Switch model No. Lead wire Lead wire Voltage straight L-shaped AC DC Display Lead wire TH* TV* 1 color display T5H* T5V* Reed No indicator lamp T8H* T8V* 1 color display T1H* T1V* T2H* T2V* 1 color display T3H* T3V* 3 line T3PH* T3PV* 1 color display (custom) 3 line T2WH* T2WV* Proximity T2YH* T2YV* 2 color display T3WH* T3WV* 3 line T3YH* T3YV* T2JH* T2JV* 1 color display off-delay * Lead wire Blank 1 m (standard) 3 3 m (option) 5 5 m (option) Contact CMK2-FP1 How to order FP1 FP2 Variation: G2, G3 Switch model No. Lead wire Lead wire Voltage straight L-shaped AC DC Display Lead wire T2YLH* T2YLV* 2 color display T3YLH* T3YLV* 3 line * Lead wire Blank 1m (standard) 3 3m (option) 5 5m (option) Contact Proximity How to order mounting bracket Bore size (mm) φ 2 φ 25 φ 32 φ 4 Mounting bracket Basic () Note 3 M1--2 M1--3 M1--3 M1--3 Axial foot (LB/LS) M1-LB-2 M1-LB-3 M1-LB-3 M1-LB-3 Flange (FA/FB) M1-FA-2 M1-FA-3 M1-FA-3 M1-FA-3 Trunnion (TA/TB) M1-TA-2 M1-TA-3 M1-TA-3 M1-TA-4 Eye bracket (CA) M1-CA-2 M1-CA-3 M1-CA-3 M1-CA-3 Clevis bracket (CB) M1-CB-2 M1-CB-3 M1-CB-3 M1-CB-3 Note 1: As for mounting brackets, mounting nuts and toothed washers are supplied with the axial foot and flange. The trunnion includes mounting nuts. Note 2: For axial foot (both sides), 2 sets of the "M1-LB-*1 above are required. Note 3: Mounting nut, toothed washer only. As the basic () of the product is supplied with one set of it, please use it when needed for an addition. 1

16 Medium bore size cylinder/all stainless steel exterior/waterproof type CMK2-JG2/JG3-FP1 Bore size: φ 2/φ 25/φ 32/φ 4 NSF H1 Medium bore size cylinder CMK2 Catalog No. CC-1298A JIS symbol Specifications CMK2-JG2/JG3 Bore size mm φ 2 φ 25 φ 32 φ 4 Actuation Double acting/water-resistant Working fluid Compressed air Max. working pressure MPa 1. Min. working pressure MPa.15 Proof pressure MPa 1.6 Ambient temperature C -1 to 6 (no freezing) Port size Rc 1/ Stroke tolerance mm ( to 2) (>2) Working piston speed mm/s 5 to 5 Cushion Rubber cushion Lubrication Not required Max. absorbed energy J Stroke Bore size (mm) Standard stroke (mm) Max. stroke (mm) Min. stroke (mm) Min. stroke/switch (mm) φ 2, φ 25, φ 32, φ 4 25, 5, 75, 1, 15, 2, 25, Note 1: The custom stroke is available in 1 mm increments. Note 2: Single foot (LS) has max. stroke of 5 mm. 11

17 Switch specifications Item/mounting Bore size (mm) Basic () Product weight when stroke (S) = mm Axial foot (LB) Axial foot (LS) Flange (FA, FB) Eye bracket (CC) CMK2-JG2/JG3 Specifications Type/model No. Proximity switch specifications T2YLH/T2YLV T3YLH/T3YLV Applications Programmable controller Programmable controller, relay Output method NPN output Power supply voltage 1 to 28 VDC Load voltage/current 1 to 3 VDC, 5 to 2 ma Note 1 3 VDC, 5 ma Indicator lamp Red/green LED (lit when ON) Leakage current 1mA 1 μa Shock resistance 98 m / s 2 Weight g 1 m: 33 3 m: 87 5 m: 142 Note 1: The above max. load current is 2 ma at 25 C. The current is lower than 2 ma if the operating ambient temperature around the switch is higher than 25 C. (5 to 1 ma at 6 C) Cylinder weight Switch weight (per 1 pc.) Switch rail + band weight Additional weight per S = 1 mm φ Refer to weight φ indicated in the φ switch specifications. φ (Unit: kg) FP1 FP2 (Example) Product weight of CMK2-JG2-FA-32-5-T2YL-D Product weight when S = mm...56kg Additional weight when S = 5 mm...additional weight when S = 1 mm.2 Weight of 2 switches...62kg Weight of switch rail + 2 bands...18kg Product weight...56 kg +.1 kg +.62 kg +.18 kg =.74 kg Product stroke (5) 1 =.1 kg Theoretical thrust table Bore size (mm) φ 2 φ 25 φ 32 φ 4 Operating direction (Unit: N) Working pressure MPa Push x x x x x x x 1 2 Pull x x x x x x 1 2 Push x x x x x x x x 1 2 Pull x x x x x x x x 1 2 Push x x x x x x x x x x 1 2 Pull x x x x x x x x x x 1 2 Push 1.26 x x x x x x x x x x x 1 3 Pull 1.1 x x x x x x x x x x x

18 CMK2-JG2/JG3 How to order Without switch CMK2 JG2 With switch CMK2 JG FP1 5 T2YL R V FP1 Y H Accessory Note 3 A Variation B Mounting type Note 1 C Bore size D Stroke Precautions for model No. selection Note 1: Single foot (LS) has the max. stroke of 5 mm. Note 2: Refer to page 11 for the min. stroke with switch. Note 3: I and Y cannot be selected together Note 4: Up to 3 switches can be mounted. If four or more switches are required, switch mounting brackets for the extra switches must be prepared separately. E Switch model No. * indicates lead wire F Switch quantity Note 4 G Option Code A Variation JG2 All stainless steel exterior + water-resistant scraper + packing NBR JG3 All stainless steel exterior + water-resistant scraper + packing FKM B Mounting type Basic LB Axial foot (both sides) LS Axial foot (one side) FA Rod end flange FB Head end flange CC Eye bracket integrated C Bore size (mm) 2 φ 2 25 φ φ 32 4 φ 4 D Stroke (mm) Bore size Stroke Note 2 Custom stroke φ 2 5 to 75 φ 25 5 to 75 φ 32 5 to 75 In 1 mm increments φ 4 5 to 75 E Switch model No. Axial lead wire T2YLH* Radial lead wire T2YLV* Contact Voltage Display Lead wire 2-wire 2-color Proximity DC T3YLH* T3YLV* display 3-wire F Switch quantity R One on rod end H One on head end D 2 T 3 G Option Blank Standard V Boss cut off H Accessory I Rod eye Y Rod clevis (pin and snap ring included) [Example of model No.] CMK2-JG2-CC-32-5-T2YLH-D-FP1Y Model: Medium bore size cylinder, food grade grease A Variation : All stainless steel exterior + water-resistant scraper + packing NBR B Mounting type : Eye bracket integrated C Bore size : φ 32 D Stroke : 5 mm E Switch model No. : Proximity switch T2YLH, lead wire 1 m F Switch quantity : 2 included G Option : Food grade grease H Accessory : Rod clevis 13

19 FP1 FP2 MEMO 14

20 Pneumatic Cylinders I Catalog No. CB-29SA Round shaped cylinder SCM-FP1 Bore size: φ 2/φ 25/φ 32/φ 4 φ 5/φ 63/φ 8/φ 1 NSF H1 Specifications SCM Bore size mm φ 2 φ 25 φ 32 φ 4 φ 5 φ 63 φ 8 φ 1 Working fluid Compressed air Max. working pressure MPa 1. Min. working pressure MPa.1.5 Proof pressure MPa 1.6 Ambient temperature C -1 to 6 (no freezing) Port size Rubber cushion Rc1/8 Rc1/4 Rc3/8 Rc1/2 Air cushion M5 Rc1/8 Rc1/4 Rc3/8 Rc1/2 Rubber (to 1) Stroke tolerance cushion (to 15) (to 1), (to 15) mm Air cushion (to 1) (to 15) (to 1), (to 15) Working piston speed mm/s 3 to 1 (Operate under the max. absorbed energy) Cushion Either rubber cushion or air cushion can be selected. Effective air cushion length mm Lubrication Not required Max. Rubber cushion energy Air cushion absorption J No cushion Stroke Variation: Blank, R Bore size (mm) Standard stroke (mm) Max. stroke (mm) Min. stroke (mm) φ 2 φ 25 φ 32 1 φ 4 25, 5, 75, 1, 125, 15, φ 5 2, 25, 3 1 φ φ 8 φ 1 Variation: X, Y Bore size (mm) Standard stroke (mm) Max. stroke (mm) Min. stroke (mm) φ 2 25, 5, 75 φ 25 1, 125 φ 32 φ 4 15, Variation: P, D, W, W4, M Bore size (mm) Standard stroke (mm) Max. stroke (mm) Min. stroke (mm) φ 2 φ 25 25, 5, 75 φ 32 1, 125, 15 φ 4 φ 5 2, 25, φ 63 Variation: B Bore size (mm) Standard stroke (mm) Max. stroke (mm) Min. stroke (mm) φ 2 φ 25 25, 5, 75 5 φ 32 1, 125, 15 φ 4 φ 5 2, 25, φ 63 Note 1: Described in left is specification of double acting/single rod. Each description varies depending on variation. Refer to Pneumatic Cylinders I (CB-29SA) for details. Note 2: The values of "No cushion" of max. absorbed energy are the max. absorbed energy of either the head end for air cushion "R" or the rod end for air cushion "H". Note 3: Without any cushion, this product cannot absorb large energy generated by external load. We recommend to use an external shock absorber. Note 1: Custom stroke is available per mm. Note 1: Custom stroke is available per mm. Note 1: Custom stroke is available per mm. Note 2: Stroke of more than 6 mm will be custom order. Contact CKD for details. Note 1: Custom stroke is available per mm. 15

21 How to order Without switch SCM With switch A M Variation Note 1 LB 4 B C Bore size 1 SCM M LB 4 B 1 T2H B Mounting style Note 1, Note 2 F Stroke D Port thread type E Cushion Note 4 G Switch model No. Note 5 Note on model No. selection Note 1: Mounting bracket will be shipped with the product. Note 2: If the product is supplied with bellows and the mounting bracket is LB, FA, it will be included with the product. Note 3: Refer to Pneumatic Cylinders I (CB-29SA) for min. stroke with switch. Note 4: Air cushion cannot be selected for variation symbol X and Y. Note 5: T8H/V switches cannot be mounted when the bore size is from φ 2 to φ 4 and the switch mounting style is rail. Note 6: The instantaneous max. temperature is that at which sparks, swarf, etc., instantaneously contact bellows. Note 7: Refer to Pneumatic Cylinders I (CB-29SA) for custom specifications of rod end form. Note 8: "Q" (switch rail included at shipment) is not available for the "Z" switch mounting style. Note 9: "I" and "Y" cannot be selected simultaneously. Note 1: Switches are shipped with the product. Contact CKD assembly when shipping is required. [Example of model No.] SCM-M-LB-4B-1-T2H-D-JFP1I Switch mounting style Model No.: Round shaped cylinder, grade grease specifications for food A Variation : Double acting/non-rotation B Mounting style : Axial foot C Bore size : φ 4 mm D Port thread type : Rc thread E Cushion : Both sides air cushioned F Stroke : 1 mm G Switch model No. : Proximity T2H switch, lead wire 1 m H Switch quantity : 2 I Switch mounting style : Rail J Option : Bellows, max. ambient temperature 6 C, instantaneous max. temperature 1 C K Accessory : Rod eye D I J J FP1 FP1 H Switch quantity J Option Note 2 Note 6 Note 8 I I K Accessory Note 9 SCM-FP1 How to order Code A Variation Bore size Blank Double acting/single rod X Single acting/push Y Single acting/pull D Double acting/double rod W4 Double acting/tandem M Double acting/non-rotation B Mounting style Bore size Basic LB Axial foot FA Rod end flange FB Head end flange CA Eye bracket CB Clevis bracket (pin and snap ring included) TA Rod end trunnion TB Head end trunnion C Bore size (mm) 2 φ 2 25 φ φ 32 4 φ 4 5 φ 5 63 φ 63 8 φ 8 1 φ 1 D Port thread type Blank Rc thread N NPT thread (custom order product) Air cushion: φ 32 G G thread (custom order product) Air cushion: φ 32 E Cushion B Both sides air cushioned R Rod end air cushioned H Air cushion on rod end D Both sides rubber cushioned F Stroke (mm) Refer to the stroke table on page 15. G Switch model No. Refer to the switch model No. on page 19. H Switch quantity R 1 (on rod end) H 1 (on head end) D 2 T (when there are more than 4 switches, indicate switch quantity.) I Switch mounting style Blank Rail Z Band J Option Max. ambient temperature Instantaneous max. temperature J Bellows 6 C 1 C K Bellows 1 C 2 C L Bellows 25 C 4 C Q Switch rail included at shipment M Piston rod material stainless steel K Accessory Bore size I Rod eye Y Rod clevis (pin and snap ring included) B1 Eye bracket B2 Clevis bracket FP1 FP2 16

22 SCM-FP1 How to order Without switch SCM With switch SCM P LB A Variation 4 D C Bore size F Stroke D Port thread type E Cushion Note on model No. selection 1 25 Note 1: A mounting bracket will be shipped with the product if LB, FB or TB is selected. FA/TA will be included with the product. Note 2: Refer to Pneumatic Cylinders I (CB-29SA) for min. stroke with switch. Note 3: T8H/V switches cannot be mounted when the bore size is from φ 2 to φ 4 and the switch mounting style is rail. Note 4: The instantaneous max. temperature is that at which sparks, swarf, etc., instantaneously contact bellows. Note 5: Refer to Pneumatic Cylinders I (CB-29SA) for custom specifications of rod end form. Note 6: "Q" (switch rail included at shipment) is not available for the "Z" switch mounting style. Note 7: "I" and "Y" cannot be selected simultaneously. Note 8: Switches are shipped with the product. Contact CKD assembly when shipping is required. Adjustable stroke range [Example of model No.] SCM-P-LB-4D-1-25-TH-D-JFP1I Switch model No. Note 3 Model No.: Round shaped cylinder, grade grease specifications for food A Variation : Double acting/stroke adjustable (push) B Mounting style : Axial foot C Bore size : φ 4 mm D Port thread type : Rc thread E Cushion : Both sides rubber cushioned F Stroke : 1 mm G Adjustable stroke range : 25 mm H Switch model No. : Reed TH switch, lead wire 1 m I Switch quantity : 2 J Switch mounting style : Rail K Option : Bellows, max. ambient temperature 6 C, instantaneous max. temperature 1 C L Accessory : Rod eye G H I J Switch quantity Switch mounting style K J Option Note 4, Note 6 FP1 P LB 4 D 1 25 TH D J FP1 I B Mounting style Note 1 I L Accessory Note 7 Code A Variation P Double acting/stroke adjustable (push) R Double acting/stroke adjustable (pull) B Mounting style Basic LB Axial foot FA Rod end flange TA Rod end trunnion TB Head end trunnion C Bore size (mm) 2 φ 2 25 φ φ 32 4 φ 4 5 φ 5 63 φ 63 D Port thread type Blank Rc thread N NPT thread (custom order product) G G thread (custom order product) E Cushion D Both sides rubber cushioned F Stroke (mm) Refer to the stroke table on page 15. G Adjustable stroke range (mm) H Switch model No. Refer to the switch model No. on page 19. I Switch quantity R 1 (on rod end) H 1 (on head end) D 2 T (when there are more than 4 switches, indicate switch quantity.) J Switch mounting style Blank Rail Z Band K Option Max. ambient temperature Instantaneous max. temperature J Bellows 6 C 1 C K Bellows 1 C 2 C L Bellows 25 C 4 C Q Switch rail included at shipment M Piston rod material (stainless steel) L Accessory I Rod eye Y Rod clevis (pin and snap ring included) B2 Clevis bracket 17

23 How to order W: Total stroke W: 1st stage stroke S1 S2 Without switch B: Cylinder 1 stroke B: Cylinder 2 stroke SCM B LB 4 D 25 D 5 J FP1 Y With switch SCM B LB 4 D 25 TH D D 5 TH R A Variation Cylinder 1 Cylinder 2 J FP1 Y SCM-FP1 How to order K Accessory B Mounting style Note 1 C Bore size D Port thread type E Cushion G Switch model No. Note 3 Note on model No. selection H Switch quantity Note 1: Mounting bracket will be shipped with the product. Note 2: If the product is supplied with bellows and the mounting bracket is LB, FA, or TA, it will be included with the product. Note 3: Refer to Pneumatic Cylinders I (CB-29SA) for min. stroke with switch. Note 4: Value at stroke S1=S2 cannot be selected for variation W. Note 5: T8H/V switches cannot be mounted when the bore size is from φ 2 to φ 4 and the switch mounting style is rail. Note 6: The instantaneous max. temperature is that at which sparks, swarf, etc., instantaneously contact bellows. Note 7: Refer to Pneumatic Cylinders I (CB-29SA) for custom specifications of rod end form. Note 8: "Q" (switch rail included at shipment) is not available for the "Z" switch mounting style. Note 9: Switches are shipped with the product. Contact CKD assembly when shipping is required. [Example of model No.] SCM-B-LB-4-D25-TH-D-D5-TH-R-JFP1Y F Stroke = S1 Note 4 D Port thread type E Cushion G Switch model No. I Model No.: Round shaped cylinder, grade grease specifications for food A Variation : Double acting, back to back B Mounting style : Axial foot C Bore size : φ 4 mm J D Port thread type : Rc thread E Cushion : Both sides rubber cushioned F Stroke : S1 = 25 mm Cylinder 1 B: Cylinder 1 Cylinder 2 E Cushion : Both sides rubber cushioned F Stroke : S2 = 5 mm Cylinder 2 G Switch model No. : Reed TH switch, lead wire 1 m H Switch quantity : 2 (cylinder 1), W: Cylinder 1 Cylinder 2 Cylinder 2: 1 (on rod end) I Switch mounting style : Rail J Option : Bellows, max. ambient temperature 6 C, instantaneous max. temperature 1 C K Accessory : Rod clevis F Stroke = S2 Note 4 H Switch quantity Switch mounting style Option Note 6 Note 8 Code A Variation B Back to back W Two stage B Mounting style Basic LB Axial foot FA Cylinder 1 side flange FB Cylinder 2 side flange TA Cylinder 1 side trunnion TB Cylinder 2 side trunnion C Bore size (mm) 2 φ 2 25 φ φ 32 4 φ 4 5 φ 5 63 φ 63 D Port thread type Blank Rc thread N NPT thread (custom order product) G G thread (custom order product) E Cushion D Both sides rubber cushioned F Stroke (mm) B W Note 4 Bore size S1 S2 S1 S2 φ 2 to φ 32 φ 4 to φ 63 1 to 5 1 to 75 1 to 5 1 to 1 to 6 75 G Switch model No. Refer to the switch model No. on page to 2 H Switch quantity R 1 (on rod end) H 1 (on head end) D 2 T (when there are more than 4 switches, indicate switch quantity.) I Switch mounting style Blank Rail Z Band J Option Max. ambient temperature Instantaneous max. temperature J Bellows 6 C 1 C K Bellows 1 C 2 C L Bellows 25 C 4 C Q Switch rail included at shipment M Piston rod material (stainless steel) K Accessory I Rod eye Y Rod clevis (pin and snap ring included) B2 Clevis bracket FP1 FP2 18

24 SCM-FP1 Switch model No. Switch model No. Lead wire straight TH* Lead wire L-shaped TV* Contact Reed Voltage AC DC Display 1 color display T5H* T5V* No indicator lamp T8H* T8V* 1 color display T1H* T2H* T3H* T1V* T2V* T3V* Proximity 1 color display T3PH* T3PV* 1 color display (custom) T2WH* T2YH* T3WH* T3YH* T2WV* T2YV* T3WV* T3YV* 2 color display T2YD* - 2 color display T2YDT* - AC magnetic field Lead wire 3 line 3 line T2JH* T2JV* 1 color display off-delay * Lead wire Blank 1 m (standard) 3 3 m (option) 5 5 m (option) How to order mounting bracket Bore size (mm) Mounting bracket Note 1: All mounting brackets are supplied with mounting bolts. Note 2: Foot mounting bracket is provided as 2 pcs./set. φ 2 φ 25 φ 32 φ 4 φ 5 φ 63 φ 8 φ 1 Foot (LB) SCM-LB-2 SCM-LB-25 SCM-LB-32 SCM-LB-4 SCM-LB-5 SCM-LB-63 SCM-LB-8 SCM-LB-1 Flange (FA/FB) SCM-FA-2 SCM-FA-25 SCM-FA-32 SCM-FA-4 SCM-FA-5 SCM-FA-63 SCM-FA-8 SCM-FA-1 Eye bracket (CA) SCM-CA-2 SCM-CA-25 SCM-CA-32 SCM-CA-4 SCM-CA-5 SCM-CA Clevis bracket (CB) SCM-CB-8-FP1 SCM-CB-1-FP1 Trunnion (TA/TB) SCM-TA-2-FP1 SCM-TA-25-FP1 SCM-TA-32-FP1 SCM-TA-4-FP1 SCM-TA-5-FP1 SCM-TA-63-FP

25 FP1 FP2 MEMO 2

26 Tie rod cylinder SCG-FP1 Bore size: φ 32/φ 4/φ 5/φ 63/φ 8/φ 1 NSF H1 Pneumatic Cylinders I Catalog No. CB-29SA 21 Specifications SCG Bore size mm φ 32 φ 4 φ 5 φ 63 φ 8 φ 1 Actuation Double acting Working fluid Compressed air Max. working pressure MPa 1. Min. working pressure MPa.5 Proof pressure MPa 1.6 Ambient temperature C -1 to 6 (no freezing) Port size Rc1/8 Rc1/4 Rc3/8 Rc1/ Stroke Rubber cushion (to 1), (11 to 15) tolerance mm Air cushion ( to 36), (361 to 1), (11 to 15) Working piston speed mm/s 3 to 1 (Operate under the max. absorbed energy.) Cushion Either air cushion or rubber cushion can be selected. Effective air cushion length mm Lubrication Not required Max. energy Rubber cushion absorption J Air cushion Note 1: Described in above is specification of double acting/single rod. Each description varies depending on variation. Refer to Pneumatic Cylinders I (CB-29SA) for details. Stroke Variation: blank, G, G2, G3 Bore size (mm) Standard stroke (mm) Max. stroke (mm) Available stroke (mm) Min. stroke (mm) φ 32 7 φ 4 25/5/75/1 8 6 φ 5 15/2/ φ 63 3/35/4 12 φ 8 45/ φ Note 1: Custom stroke is available per mm. Note 2: If the max. stroke is exceeded, product specifications may not be met, depending on operating conditions. Contact CKD in this case. Note 3: As for the type with bellows, the available stroke is 5 mm for φ 32 to φ 4 bore size, 6 mm for φ 5 to φ 63, and 8 mm for φ 8 to φ 1. Note4: Any of variation G2, G3 doesn't have bore size φ 32. Variation: M Bore size (mm) Standard stroke (mm) Max. stroke (mm) Min. stroke (mm) φ 32 25/5/75/1 φ 4 15/2/25 φ 5 3/35/4 6 1 φ 63 45/5 Note 1: Custom stroke is available per mm. Note 2: If the max. stroke is exceeded, product specifications may not be met, depending on operating conditions. Contact CKD in this case. Variation: B Bore size (mm) Standard stroke (mm) Max. stroke (mm) Min. stroke (mm) φ 32 φ 4 25/5/75/1 6 φ 5 15/2/25 1 φ 63 3/35/4 φ 8 45/5 7 φ 1 8 Note 1: Custom stroke is available per mm. Note 2: If the max. stroke is exceeded, product specifications may not be met, depending on operating conditions. Contact CKD in this case. Note 3: As for the type with bellows, the available stroke is 5 mm for φ 32 to φ 4 bore size, 6 mm for φ 5 to φ 63, and 8 mm for φ 8 to φ 1.

27 How to order Without switch SCG With switch SCG Model No. M LB 4 B 1 M LB 4 B 1 T2H A Variation Note on model No. selection Note 1: Mounting bracket will be shipped with the product. (If the product is trunnion (TA, TB or TC) with bellows and the mounting bracket is LB or FA, it will be included with the product.) Note 2: Both sides rubber cushioned cannot be selected for variations G2 and G3. Note 3: Refer to Pneumatic Cylinders I (CB-29SA) for min. stroke of switch. Note 4: When selecting TA or TB as mounting style, the switch quantity is limited to "H" 1 (on head end) for TA, and "R" 1 (on rod end) for TB. Note 5: The instantaneous max. temperature is that at which sparks, swarf, etc., instantaneously contact bellows. Note 6: Option M cannot be selected, when either of variation M, G2, or G3 is selected. Note 7: Option J cannot be selected, when either of variation G, G2, or G3 is selected. Note 8: "I" and "Y" cannot be selected simultaneously. [Example of model No.] SCG-M-LB-4B-1-T2H-D-JFP1I B Mounting style Note 1 C Bore size D Port thread type Model No.: Tie rod cylinder, grade grease specifications for food A Variation : Double acting/non-rotation B Mounting style : Axial foot C Bore size : φ 4 mm D Port thread type : Rc thread E Cushion : Both sides air cushioned F Stroke : 1 mm G Switch model No. : Proximity T2H switch, lead wire 1 m H Switch quantity : 2 I Option : Bellows, max. ambient temperature 6 C, instantaneous max. temperature 1 C J Accessory : Rod eye E F Stroke Cushion Note 2 D J J FP1 FP1 G Switch model No. H Switch quantity Note 4 I Option Note 5 Note 6 Note 7 I I SCG-FP1 How to order I Accessory Note 8 Code A Variation Bore size Blank Double acting/single rod D Double acting/double rod M Double acting/non-rotation G Double acting/rubber scraper G2 Double acting/coolant proof (packing seal material NBR) G3 Double acting/coolant proof (packing seal material FKM) B Mounting style Basic LB Axial foot FA Rod end flange FB Head end flange CA Eye bracket CB Clevis bracket (pin and split pin included) TA Rod end trunnion TB Head end trunnion TC Center trunnion C Bore size (mm) 32 φ 32 4 φ 4 5 φ 5 63 φ 63 8 φ 8 1 φ 1 D Port thread type Blank Rc thread N NPT thread (custom order product) G G thread (custom order product) E Cushion B Both sides air cushioned D Both sides rubber cushioned Note: The rubber cushion is longer in total length than the air cushion. F Stroke (mm) Refer to the stroke table on page 21. G Switch model No. Refer to the switch model No. on the next page. H Switch quantity R 1 (on rod end) H D 2 T 3 1 (on head end) I Option Max. ambient temperature Instantaneous ambient temperature J Bellows 6 C 1 C M Piston rod material (stainless steel) J Accessory I Rod eye Y Rod clevis (pin and split pin included) B1 Eye bracket B2 Clevis bracket (pin and split pin included) B3 Eye bracket B4 Trunnion No. 2 bracket (2 pcs./set) 22 FP1 FP2

28 SCG-FP1 Switch model No. Variation: blank, D, M, G Switch model No. Lead wire Straight TH* Variation: G2, G3 Lead wire L-shaped TV* Contact Reed Voltage AC DC Display 1 color display T5H* T5V* No indicator lamp T8H* T8V* 1 color display T1H* T2H* T3H* T1V* T2V* T3V* Proximity 1 color display T3PH* T3PV* 1 color display (custom) T2WH* T2YH* T3WH* T3YH* T2WV* T2YV* T3WV* T3YV* 2 color display T2YD* - 2 color display T2YDT* - AC magnetic field Lead wire 3 line 3 line T2JH* T2JV* 1 color display off-delay * Lead wire Blank 1 m (standard) 3 3 m (option) 5 5 m (option) Switch model No. Lead wire Straight Lead wire L-shaped Contact Voltage AC DC Display Lead wire T2YLH* T2YLV* 2 color display T3YLH* T3YLV* 3 line * Lead wire Blank 1 m (standard) 3 3 m (option) 5 5 m (option) Proximity How to order mounting bracket Bore size (mm) Mounting bracket φ 32 φ 4 φ 5 φ 63 φ 8 φ 1 Foot (LB) SCG-LB-32 SCG-LB-4 SCG-LB-5 SCG-LB-63 SCG-LB-8 SCG-LB-1 Flange (FA) (FB) Note 1 SCG-FA-32 SCG-FA-4 SCG-FA-5 SCG-FA-63 SCG-FA-8 SCG-FA-1 Eye bracket (CA) SCG-CA-32-FP1 SCG-CA-4-FP1 SCG-CA-5-FP1 SCG-CA-63-FP1 SCG-CA-8-FP1 SCG-CA-1-FP1 Clevis bracket (CB) SCG-CB-32-FP1 SCG-CB-4-FP1 SCG-CB-5-FP1 SCG-CB-63-FP1 SCG-CB-8-FP1 SCG-CB-1-FP1 Note 1: Specify the flange (FA) with bellows as "SCG-FA-(bore size)-j". Note 2: The foot mounting bracket (LB) is provided as 2 pcs./set. Note 3: All mounting brackets are supplied with mounting bolts. 23

29 FP1 FP2 MEMO 24

30 Medium bore size cylinder SCA2-FP1 Bore size: φ 4/φ 5/φ 63/φ 8/φ 1 NSF H1 Pneumatic Cylinders I Catalog No. CB-29SA Specifications SCA2 Bore size mm φ 4 φ 5 φ 63 φ 8 φ 1 Actuation Double acting Working fluid Compressed air Max. working pressure MPa 1. Min. working pressure MPa.5 Proof pressure MPa 1.6 Ambient temperature C -1 to 6 (no freezing) Port size Rc1/4 Rc3/8 Rc1/ Stroke tolerance mm ( to 36), ( to 8) Working piston speed mm/s Cushion Stroke Variation: blank, G, G2, G3 5 to 1 (Operate under the max. absorbed energy) Air cushion Effective air cushion length mm Lubrication Not required Max. energy absorption J Cushioned No cushion Without any cushion, this product cannot absorb large energy generated by external load. We recommend to use an external shock absorber. Bore size (mm) Standard stroke (mm) Max. stroke (mm) Available stroke (mm) Min. stroke (mm) Note 1: Custom stroke is available per mm. φ /5/75/1/ Note 2: If max. stroke is exceeded, product specifications φ may not be satisfied depending on the conditions. 15/2/25/ φ 63 1 Refer to Pneumatic Cylinders I (CB-29SA). 3/35/4/ Note 3: The max. stroke available for φ 63 to φ 1 bore φ /5 size models with bellows is 2 mm. φ 1 8 Note 3 Variation: P, R Variation: W Bore size (mm) Standard stroke (mm) Max. stroke (mm) Min. stroke (mm) φ 4 25/5/75/1/ φ /2/25/ φ /35/4/ φ /5 φ 1 8 Note 1: Custom stroke is available per mm. Bore size (mm) Standard stroke (mm) Max. stroke (mm) Min. stroke (mm) φ 4 25/5/75/1/ φ /2/25/ φ 63 3/35/4/ φ 8 7 (Total stroke) 45/5 φ 1 8 Note 1: Custom stroke is available per mm. Variation: D Variation: K Bore size (mm) Standard stroke (mm) Max. stroke (mm) Available stroke (mm) Min. stroke (mm) Bore size (mm) Standard stroke (mm) Max. stroke (mm) Available stroke (mm) Min. stroke (mm) φ 4 φ /5/75/1/ 25/5/75/1/ φ 5 6 φ /2/25/ 15/2/25/ φ φ 63 3/35/4/ 3/35/4/ 19 φ 8 7 φ /5 45/5 φ 1 8 φ Note 1: Custom stroke is available per mm. Note 2: If max. stroke is exceeded, product specifications may not be satisfied depending on the conditions. Refer to Pneumatic Cylinders I (CB-29SA). Variation: B Bore size (mm) Standard stroke (mm) Max. stroke (mm) Min. stroke (mm) φ 4 25/5/75/1/ 1 φ /2/25/ (the same in φ 63 3/35/4/ cylinder 1 and φ /5 cylinder 2) φ 1 8 Note 1: Custom stroke is available per mm. 25 Note 1: Described in above is specification of double acting/single rod. Each description varies depending on variation. Refer to Pneumatic Cylinders I (CB-29SA) for details. Note 1: Custom stroke is available per mm. Note 2: If max. stroke is exceeded, product specifications may not be satisfied depending on the conditions. Refer to Pneumatic Cylinders I (CB-29SA).

31 How to order Without switch SCA2 D LB 4 B 1 With switch Note 1: CA or CB cannot be selected, when either of variation D is selected. Note 2: Mounting bracket will be shipped with the product. (For trunnion, it will be preassembled before shipment.) Note 3: If the stroke exceeds the max. stroke, refer to Pneumatic Cylinders I (CB-29SA). Note 4: The max. stroke available for φ 63 to φ 1 bore size models with bellows is 2 mm. Note 5: Switches are shipped with the product. Note 6: Refer to Pneumatic Cylinders I (CB-29SA) for min. stroke with switch. Note 7: When selecting TA or TB as mounting style, the switch quantity is limited to "H" (1 (on head end)) for TA, and "R" (1 (on rod end)) for TB. Note 8: Switch cannot be built in for variation symbol K. Note 9: The instantaneous max. temperature is that at which sparks, swarf, etc., instantaneously contact bellows. Note 1: "I" and "Y" cannot be selected simultaneously. Note 11: Refer to Pneumatic Cylinders I (CB-29SA) for custom specifications of rod end form. Note 12: Refer to Pneumatic Cylinders I (CB-29SA) for combination of variations/options. [Example of model No.] SCA2-D-LB-4B-1-TH-R-SFP1I Model No.: Medium bore size cylinder, grade grease specifications for food A Variation : Double acting/double rod B Mounting style : Axial foot C Bore size : φ 4 mm D Port thread type : Rc thread E Cushion : Both sides cushioned F Stroke : 1 mm G Switch model No. : Reed TH switch, lead wire 1 m H Switch quantity : 1 (on rod end) I Option : Cushion needle position S J Accessory : Rod eye S FP1 SCA2 D LB 4 B 1 TH R S FP1 I B Mounting style Note 1, Note 2 C Bore size F Stroke Note 3 Note 4 E Cushion D Port thread type Note on model No. selection G Switch model No. Note 5 H Switch quantity Note 7 I Option Note 9 I J Accessory Note 1 SCA2-FP1 How to order Code A Variation Blank Double acting/single rod D Double acting/double rod K Double acting/steel tube G Double acting/rubber scraper G2 Double acting/coolant proof (packing seal material NBR) G3 Double acting/coolant proof (packing seal material FKM) Mounting style Basic LB Axial foot FA Rod end flange FB Head end flange FC Head end special flange CA Eye bracket CB Clevis bracket (pin and snap ring included) TC Center trunnion TA Rod end trunnion TB Head end trunnion TF Center supporting hole (φ 4 is not available) TD Rod end supporting hole (φ 4 is not available) TE Head end supporting hole (φ 4 is not available) B C Bore size (mm) 4 φ 4 5 φ 5 63 φ 63 8 φ 8 1 φ 1 D Port thread type Blank Rc thread N NPT thread (custom order product) G G thread (custom order product) E F Cushion B Both sides cushioned R Rod end cushioned H Head end cushioned N No cushion Stroke (mm) Refer to the stroke table on page 25. G Switch model No. Refer to the switch model No. table on page 29. H Switch quantity R 1 (on rod end) H 1 (on head end) D 2 T 3 I Option Max. ambient temperature Instantaneous max. temperature J Bellows 1 C 2 C L Bellows 25 C 4 C M Piston rod material (stainless steel) Blank Cushion needle position R (standard) S Cushion needle position S T Cushion needle position T Accessory I Rod eye Y Rod clevis (pin and snap ring included) B1 Eye bracket B2 Clevis bracket (pin and snap ring included) B3 Eye bracket B4 Trunnion No. 2 bracket (2 pcs./set) J FP1 FP2 26

32 SCA2-FP1 How to order Without switch SCA2 With switch SCA2 P LB 4 B 1 25 S FP1 I P LB 4 B 1 25 TH R S FP1 A Variation B Mounting style Note 1 C Bore size F Stroke Note 2 G D Port thread type E Cushion Note on model No. selection Note 1: Mounting bracket will be shipped with the product. (For axial foot, head end flange and trunnion, it will be preassembled before shipment.) Note 2: If the stroke exceeds the max. stroke, refer to Pneumatic Cylinders I (CB-29SA). Note 3: Refer to Pneumatic Cylinders I (CB-29SA) for min. stroke with switch. Note 4: Switches are shipped with the product. Note 5: When selecting TA or TB as mounting style, the switch quantity is limited to "H" (1 (on head end)) for TA, and "R" (1 (on rod end)) for TB. Note 6: The instantaneous max. temperature is that at which sparks, swarf, etc., instantaneously contact bellows. Note 7: "I" and "Y" cannot be selected simultaneously. Note 8: Refer to Pneumatic Cylinders I (CB-29SA) for custom specifications of rod end form. Note 9: Refer to Pneumatic Cylinders I (CB-29SA) for combination of variations/options. [Example of model No.] SCA2-P-LB-4B-1-25-TH-R-SFP1I Stroke Adjusting range H Switch model No. Note 4 Model No.: Medium bore size cylinder, grade grease specifications for food A Variation : Double acting/stroke adjustable (push) B Mounting style : Axial foot C Bore size : φ 4 mm D Port thread type : Rc thread E Cushion : Both sides cushioned F Stroke : 1 mm G Adjustable stroke range : 25 mm H Switch model No. : Reed TH switch, lead wire 1 m I Switch quantity : 1 (on rod end) J Option : Cushion needle position S K Accessory : Rod eye I Switch quantity Note 5 J K I Option Note 6 Accessory Note 7 Code A Variation P Double acting/stroke adjustable (push) R Double acting/stroke adjustable (pull) B Mounting style Basic LB Axial foot FA Rod end flange FB Head end flange TC Center trunnion TA Rod end trunnion TB Head end trunnion TF Center supporting hole (φ 4 is not available) TD Rod end supporting hole (φ 4 is not available) TE Head end supporting hole (φ 4 is not available) C Bore size (mm) 4 φ 4 5 φ 5 63 φ 63 8 φ 8 1 φ 1 D Port thread type Blank Rc thread N NPT thread (custom order product) G G thread (custom order product) E Cushion B Both sides cushioned R Rod end cushioned H Head end cushioned N No cushion F Stroke (mm) Refer to the stroke table on page 25. G Adjustable stroke range (mm) 25, 5, 75, 1 H Switch model No. Refer to the switch model No. on page 29. I Switch quantity R 1 (on rod end) H 1 (on head end) D 2 T 3 J Option Max. ambient temperature max. temperature J Bellows 1 C 2 C L Bellows 25 C 4 C M Piston rod material (stainless steel) Blank Cushion needle position R (standard) S Cushion needle position S T Cushion needle position T K Accessory I Rod eye Y Rod clevis (pin and snap ring included) B4 Trunnion No. 2 bracket (2 pcs./set) 27

33 How to order Without switch SCA2 With switch SCA2 B B A Variation B LB LB 4 4 Mounting style Note 1 Note 2 C Bore size D Port thread type E Cushion F Stroke Note 3, Note 4, Note 5 Note on model No. selection Note 1: Mounting bracket will be shipped with the product. (For trunnion, it will be preassembled before shipment.) Note 2: Mounting styles CA and CB cannot be selected for variation B. Note 3: If the stroke exceeds the max. stroke, refer to Pneumatic Cylinders I (CB-29SA). Note 4: Value at S1=S2 cannot be selected for variation W. Note 5: Refer to Pneumatic Cylinders I (CB-29SA) for min. stroke with switch. Note 6: Switches are shipped with the product. Note 7: When selecting TA or TB as mounting style, the switch quantity is limited to "H" (1 (on head end)) for TA, and "R" (1 (on rod end)) for TB. Note 8: The instantaneous max. temperature is that at which sparks, swarf, etc., instantaneously contact bellows. Note 9: Accessories B1, B2, or B3 cannot be selected for variation B. Note 1: Refer to Pneumatic Cylinders I (CB-29SA) for custom specifications of rod end form. Note 11: Refer to Pneumatic Cylinders I (CB-29SA) for combination of variations/options. B B W: Total stroke B: Cylinder 1 stroke S1 1 D Port thread type E Cushion F Stroke G Switch model No. Note 6 H Switch quantity Note 7 [Example of model No.] SCA2-B-LB-4-B1-TH-D-B5-TH-R-SFP1I Model No.: Medium bore size cylinder, grade grease specifications for food A Variation : Double acting, back to back B Mounting style : Axial foot C Bore size : φ 4 mm D Port thread type : Rc thread E Cushion : Both sides cushioned B: Cylinder 1 Cylinder 2 F Stroke S1 : 1 mm G Switch model No. : Reed TH switch, lead wire 1m H Switch quantity : 2 W: Cylinder 1 Cylinder 2 D Port thread type : Rc thread E Cushion : Both sides cushioned F Stroke S2 : 5 mm G Switch model No. : Reed TH switch, lead wire 1 m H Switch quantity : 1 (on rod end) I Option : Cushion needle position S J Accessory : Rod eye 5 1 TH D B 5 TH R Cylinder 1 Cylinder 1 Cylinder 2 B W: 1st stage stroke B: Cylinder 2 stroke S2 Cylinder 2 S S G Switch model No. I FP1 FP1 Option Note 8 J I I Accessory Note 9 SCA2-FP1 How to order Code A Variation B Double acting/back to back W Double acting/two stage B Mounting style Basic LB Axial foot FA Rod end flange FB Head end flange FC Head end special flange CA Eye bracket CB Clevis bracket (pin and snap ring included) TA Rod end trunnion TB Head end trunnion TD Rod end supporting hole (φ 4 is not available) TE Head end supporting hole (φ 4 is not available) C Bore size (mm) 4 φ 4 5 φ 5 63 φ 63 8 φ 8 1 φ 1 D Port thread type Blank Rc thread N NPT thread (custom order product) G G thread (custom order product) E Cushion B Both sides cushioned R Rod end cushioned H Head end cushioned N No cushion F Stroke (mm) Bore B W (Note 3) size S1 S2 S1 S2 φ 4 φ 5 1 to 6 1 to 6 φ 63 2 to 6 1 to 2 φ 8 1 to 7 1 to 7 φ 1 1 to 8 1 to 8 G Switch model No. Refer to the switch model No. on the next page. H Switch quantity R 1 (on rod end) H 1 (on head end) D 2 T 3 I Option Max. ambient temperature Instantaneous max. temperature J Bellows 1 C 2 C L Bellows 25 C 4 C M Piston rod material (stainless steel) Blank Cushion needle position R (standard) S Cushion needle position S T Cushion needle position T J Accessory I Rod eye Y Rod clevis (pin and snap ring included) B1 Eye bracket B2 Clevis bracket (pin and snap ring included) B3 Eye bracket B4 Trunnion No. 2 bracket (2 pcs./set) 28 FP1 FP2

34 SCA2-FP1 Switch model No. Variation: Blank, D, G, P, R, B, W Switch model No. Lead wire Lead wire Voltage straight L-shaped AC DC Display Lead wire TH* TV* 1 color display T5H* T5V* No indicator lamp T8H* T8V* 1 color display T1H* T1V* T2H* T2V* 1 color display T3H* T3V* 3 line T2WH* T2WV* T2YH* T2YV* 2 color display T3WH* T3WV* 3 line T3YH* T3YV* T3PH* T3PV* 1 color display (custom) 3 line T2YD* - 2 color display T2YDT* - AC magnetic field T2JH* T2JV* 1 color display off-delay * Lead wire Blank 1 m (standard) 3 3 m (option) 5 5 m (option) Contact Reed Proximity Variation: G2, G3 Switch model No. Lead wire Lead wire Voltage straight L-shaped AC DC Display Lead wire T2YLH* T2YLV* 2 color display T3YLH* T3YLV* 3 line * Lead wire Blank 1 m (standard) 3 3 m (option) 5 5 m (option) Contact Proximity How to order mounting bracket Bore s ize (mm) Mounting bracket φ 4 φ 5 φ 63 φ 8 φ 1 Foot (LB) Note 2 S1-LB-4 S1-LB-5 S1-LB-63 S1-LB-8 S1-LB-1 Flange (FA/FB) S1-FA-4 S1-FA-5 S1-FA-63 S1-FA-8 S1-FA-1 Eye bracket (CA) S1-CA-4-FP1 S1-CA-5-FP1 S1-CA-63-FP1 S1-CA-8-FP1 S1-CA-1-FP1 Clevis bracket (CB) S1-CB-4-FP1 S1-CB-5-FP1 S1-CB-63-FP1 S1-CB-8-FP1 S1-CB-1-FP1 Note 1: Refer to Pneumatic Cylinders I (No.CB-29SA) for material of mounting bracket. Note 2: Foot mounting bracket is provided as 2 pcs./set. Note 3: All mounting brackets are supplied with mounting bolts. Note 4 : Dimension of eye bracket (CA), clevis bracket (CB) is same as standard products. 29

35 FP1 FP2 MEMO 3

36 Medium bore size cylinder N SCS2- LN-FP1 Bore size: φ 125/φ 14/φ 16/φ 18/φ 2/φ 25 NSF H1 Pneumatic Cylinders I Catalog No. CB-29SA Specifications N SCS2- LN Bore size mm φ 125 φ 14 φ 16 φ 18 φ 2 φ 25 Actuation Double acting Working fluid Compressed air Max. working pressure MPa 1. Min. working pressure MPa.5 Proof pressure MPa 1.6 Ambient temperature C -5 to 6 (no freezing) Port size Rc1/2 Rc3/4 Rc1 Stroke tolerance mm ( to 3), ( to 1), ( to 12) Working piston speed mm/s 2 to 1 (Operate under the max. absorbed energy.) Cushion Air cushion Effective air cushion length mm Lubrication Not required Cushioned Max. energy No absorption J Without any cushion, this product cannot absorb large energy generated cushion by external load. We recommend to use an external shock absorber. Note 1: Described in left is specification of double acting/single rod. Each description varies depending on variation. Refer to Pneumatic Cylinders I (CB-29SA) for details. Stroke Variation: blank, G Bore size (mm) Standard stroke (mm) Max. stroke (mm) Available stroke (mm) Min. stroke (mm) Trunnion min. stroke (mm) φ φ φ 16 5/75/ /2 2 1 φ 18 25/ φ 2 1, 28 φ 25 1,2 28 Note 1: Custom stroke is available per mm. Note 2: If the max. stroke is exceeded, product specifications may not be met, depending on operating conditions. Contact CKD in this case. Variation: D Bore size (mm) Standard stroke (mm) Max. stroke (mm) Min. stroke (mm) Trunnion min. stroke (mm) φ φ φ 16 5/75/ /2 1 φ 18 25/ φ 2 1, 28 φ 25 1,2 28 Note 1: Custom stroke is available per mm. Note 2: If the max. stroke is exceeded, product specifications may not be met, depending on operating conditions. Contact CKD in this case. 31

37 How to order Non-lubrication type without switch SCS2-N SCS2-LN Model No. G A Variation LB Non-lubrication type with switch 125 B C Bore size 5 G LB 125 B 5 TH R J B Mounting style Note 1, Note 2 Note on model No. selection D Port thread type E Cushion Note 1: Hole type trunnion is available as custom order for φ 125 to 16 only. Contact CKD for dimensions and other details. Note 2: Mounting styles CA and CB cannot be selected for variation D. Note 3: Refer to Pneumatic Cylinders I (CB-29SA) for min. stroke with switch. Note 4: When selecting TA or TB as mounting style, the switch quantity is limited to "H" 1 (on head end) for TA, and "R" 1 (on rod end) for TB. Note 5: The instantaneous max. temperature is that at which sparks, swarf, etc., instantaneously contact bellows. Note 6 : Check the figures below for the cushion needle position indication. Note 7: "I" a nd "Y" cannot be selected simultaneously. [Example of model No.] SCS2-LNG-LB-125B-5-TH-R-JFP1Y F Stroke J G Switch model No. H Switch quantity Note 4 Model No.: Medium bore size cylinder/double acting/no lubrication type/grade grease specifications for food with switch A Variation : Double acting/rubber scraper B Mounting style : Axial foot C Bore size : φ 125 mm D Port thread type : Rc thread E Cushion : Both sides cushioned F Stroke : 5 mm G Switch model No. : Reed TH switch, lead wire 1 m H Switch quantity : 1 (on rod end) I Option : Bellows, max. ambient temperature 6 C, instantaneous max. temperature 1 C J Accessory : Rod clevis I FP1 FP1 Option Note 5 Y Y Note 6 J Accessory Note 7 N SCS2- LN-FP1 Specifications Code A Variation Blank Double acting/single rod D Double acting/double rod G Double acting/rubber scraper B Mounting style Basic LB Axial foot FA Rod end flange FB Head end flange CA Eye bracket CB Clevis bracket (pin and snap ring included) TC Center trunnion TA Rod end trunnion TB Head end trunnion TF Center supporting hole (custom order product) TD Rod end trunnion (custom order product) TE Head end trunnion (custom order product) C Bore size (mm) 125 φ φ φ φ 18 2 φ 2 25 φ 25 D Port thread type Blank Rc thread N NPT thread (custom order product) G G thread (custom order product) E Cushion B Both sides cushioned R Rod end cushioned H Head end cushioned N No cushion F Stroke (mm) Refer to the stroke table on page 31. G Switch model No. Refer to the switch model No. on the next page. H Switch quantity R 1 (on rod end) H 1 (on head end) D 2 T I Option C2 Cushion section check valve Max. ambient Instantaneous temperature max. temperature J Bellows 6 C 1 C K Bellows 1 C 2 C L Bellows 25 C 4 C M Piston rod material (stainless steel) Blank Cushion needle position (standard) Standard R Cushion needle position R S Cushion needle position S T R T Cushion needle position T S J Accessory I Rod eye Y Rod clevis (pin and snap ring included) B1 Eye bracket B2 Clevis bracket (pin and snap ring included) FP1 FP2 32

38 N SCS2- LN-FP1 Switch model No. Lead wire straight TH* Lead wire L-shaped TV* Contact Reed Voltage AC DC Display 1 color display T5H* T5V* No indicator lamp T8H* T8V* 1 color display T1H* T2H* T3H* T1V* T2V* T3V* Proximity 1 color display T2WH* T2WV* 1 color display (PNP output) (custom) T2YH* T3WH* T3YH* T3PH* T2YV* T3WV* T3YV* T3PV* 2 color display T2YD* - 2 color display T2YDT* - AC magnetic field Lead wire 3 line 3 line T2JH* T2JV* 1 color display off-delay * Lead wire Blank 1 m (standard) 3 3 m (option) 5 5 m (option) 33

39 FP1 FP2 MEMO 34

40 Pneumatic Cylinders I Catalog No. CB-29SA Compact cylinder SSD2-FP1 Bore size: φ 12/φ 16/φ 2/φ 25/φ 32/φ 4/ φ 5/φ 63/φ 8/φ 1 NSF H1 35 Specifications SSD2 Bore size mm φ 12 φ 16 φ 2 φ 25 φ 32 φ 4 φ 5 φ 63 φ 8 φ 1 Actuation Working fluid Double acting Compressed air Max. working pressure MPa 1. Min. working pressure MPa.1.5 Proof pressure MPa 1.6 Ambient temperature C -1 to 6 (no freezing) Port size M5 Rc1/8 Note 1 Rc1/4 Rc3/8 Stroke tolerance mm Rubber cushion No cushion Working piston speed mm/s 5 to 5 5 to 3 Cushion Lubrication With or without cushion can be selected Not required Max. absorbed Rubber cushion Energy J No cushion Note 1: The port size of 5 mm stroke of φ 32 without switch is M5. Note 2: Described in above is specification of double acting/single rod. Each description varies depending on variation. Refer to Pneumatic Cylinders I (CB-29SA) for details. Stroke Variation: Blank, L, K, KL Bore size (mm) Standard stroke (mm) Max. stroke (mm) Min. stroke (mm) φ 12 φ 16 5/1/15/2 25/3 φ 2 5/1/15/2/25 φ 25 3/35/4/45/5 φ 32 5/1/15/2/25/3/ φ 4 35/4/45/5/75/1 φ 5 φ 63 φ 8 φ 1 1/15/2/25 3/35/4/45/5 75/1 Note 1: When using the type with switch, refer to the table of the min. stroke with switch on Pneumatic Cylinders I (CB-29SA). Note 2: If the stroke exceeds the max. stroke, refer to the long stroke on Pneumatic Cylinders I (CB-29SA). Variation: X, XL, Y, YL Bore size (mm) Standard stroke (mm) Max. stroke (mm) Min. stroke (mm) φ φ 16 φ 2 φ 25 φ 32 φ 4 φ 5 5, 1 1, Note: When using the type with switch, refer to the table on the right. Variation: G, GL, G5, G5L Bore size (mm) Standard stroke (mm) Max. stroke (mm) Min. stroke (mm) φ 2 5/1/15/2/25 φ 25 3/35/4/45/5 φ 32 5/1/15/2/25/3/ φ 4 35/4/45/5/75/1 φ 5 φ 63 φ 8 φ 1 1/15/2/25 3/35/4/45/5 75/1 Note 1: When using the type with switch, refer to the table of the min. stroke with switch on Pneumatic Cylinders I (CB-29SA) Variation: D, DL Bore size (mm) Standard stroke (mm) Max. stroke (mm) Min. stroke (mm) φ 12 φ 16 5/1/15/2 25/3 φ 2 5/1/15/2/25 φ 25 3/35/4/45/5 φ 32 5/1/15/2/25/3/ φ 4 35/4/45/5/75/1 φ 5 φ 63 φ 8 φ 1 1/15/2/25 3/35/4/45/5 75/1 Variation: M, ML Bore size (mm) Standard stroke (mm) Max. stroke (mm) Min. stroke (mm) φ 12 5/1/15/2 3 φ 16 25/3 φ 2 5/1/15/2/25 5 φ 25 3/35/4/45/5 1 φ 32 5/1/15/2/25/3/ φ 4 35/4/45/5/75/1 1 φ 5 5/1/15/2/25/3/ φ 63 35/4/45/5/75/1 Note 1: When using the type with switch, refer to the table of the min. stroke with switch on Pneumatic Cylinders I (CB-29SA). Variation: G2, G2L, G3, G3L Bore size (mm) Standard stroke (mm) Max. stroke (mm) Min. stroke (mm) φ 16 5/1/15/2/25/3 3 φ 2 5/1/15/2/25 φ 25 3/35/4/45/5 5 φ 32 5/1/15/2/25/3/ φ 4 35/4/45/5/75/1 1 φ 5 φ 63 φ 8 φ 1 1/15/2/25 3/35/4/45/5 75/ (1) The value in ( ) is for types with one or 2 switches.

41 How to order Without switch SSD2 K 12 5 N FP1 LB I With switch SSD2 KL 12 1 TH R N FP1 LB I A Variation B Bore size C Port thread type E Stroke D Cushion Note on model No. selection H Option Note 4 F Switch model No. Note 1 Note 2 Note 3 Note 8 Note 9 Note 1: The T2YD* switch cannot be mounted on φ 12 and φ 16 units. Note 2: The T8* switch cannot be mounted on φ 12 to φ 32 units. Note 3: F switch is available only for the φ 2 or φ 25 piping port surface. Note 4: Piston rod of φ 12 to φ 25 is stainless steel as standard. C type snap ring is stainless steel instead of steel. Nut of the male thread rod end is stainless steel. Note 5: The mounting bracket is included at shipping. Note 6: When selecting LB or FA, the projection dimensions of piston rod WF is different from that of the standard. Refer to Pneumatic Cylinders I (No.CB-29SA) for dimensions. No. of the specified projection dimension will be added to the end of the model No. printed on the nameplate of the body. Note 7: " I" and "Y" cannot be selected simultaneously. Note 8: Less than 15 mm stroke is not available for φ 2 with F switch of radial lead wire. Note 9: Switches are shipped with the product. Contact CKD assembly when shipping is required. Note 1: Refer to Pneumatic Cylinders I (CB-29SA) for combination of variations/options. [Example of model No.] SSD2-KL-12-1-TH-R-NFP1-LB-I Model: Compact cylinder, grade grease specifications for food A Variation : Double acting/high load/ switch B Bore size : φ 12 mm C Port thread type : Rc thread D Cushion : No cushion E Stroke : 1 mm F Switch model No. : Reed TH switch/lead wire 1 m G Switch quantity : 1 (on rod end) H Option : Rod end male thread I Mounting bracket : Axial foot J Accessory : Rod eye G Switch quantity I Mounting bracket Note 5 Note 6 J Accessory Note 7 SSD2-FP1 How to order Code Bore size A Variation Blank Double acting/single rod L Double acting/single rod/switch K Double acting/high load KL Double acting/high load/switch X Double acting/push XL Double acting/push/switch Y Double acting/pull YL Double acting/pull/switch D Double acting/double rod DL Double acting/double rod/switch M Double acting/non-rotation ML Double acting/non-rotation/switch G Double acting/rubber scraper GL Double acting/rubber scraper/switch Double acting/coolant proof scraper G2 (packing seal material NBR) G2L Double acting/coolant proof scraper (packing seal material NBR)/switch Double acting/coolant proof scraper G3 (packing seal material FKM) G3L Double acting/coolant proof scraper (packing seal material FKM)/switch Double acting/environmentresistant scraper G5 G5L Double acting/environmentallyresistant scraper/switch B Bore size (mm) 12 φ φ 16 2 φ 2 25 φ φ 32 4 φ 4 5 φ 5 63 φ 63 8 φ 8 1 φ 1 C Port thread type Blank Rc thread NN NPT thread ( φ 32) (custom order product) GN G thread ( φ 32) (custom order product) D Cushion Blank No cushion D Rubber cushion E F Stroke (mm) Refer to the stroke table on page 35. Switch model No. Refer to the switch model No. on the next page. G Switch quantity R 1 (on rod end) H 1 (on head end) D 2 H Option Bore size (mm) Blank Rod end female thread N Rod end male thread M Note 4 Piston rod material (stainless steel) S Dedicated body for custom stroke I Mounting bracket Blank No mounting bracket LB Axial foot CB Clevis bracket (pin and snap ring included) FA Rod end flange FB Head end flange J Accessory (available when the rod end male thread "N" is selected) I Rod eye Y Rod clevis (pin and snap ring included) FP1 FP2 36

42 SSD2-FP1 Switch model No. Variation: L, KL, XL, YL, DL, ML, GL, G5L Switch model No. Lead wire Lead wire Voltage Lead Bore size Display straight L-shaped AC DC wire F2S* F3S* 3 line 1 color display F2H* F2V* F3H* F3V* 3 line F3PH* F3PV* 1 color display (PNP output) (custom order) 3 line F2YH* F2YV* 2 color display F3YH* F3YV* 3 line TH* TV* 1 color display T5H* T5V* No indicator lamp T8H* T8V* 1 color display T1H* T1V* T2H* T2V* 1 color display T3H* T3V* T3PH* T3PV* 1 color display (PNP output) (custom order) 3 line T2WH* T2WV* T2YH* T2YV* 2 color display T3WH* T3WV* 3 line T3YH* T3YV* T2YD* - T2YDT* - Contact Proximity Reed Proximity 2 color display AC magnetic field T2JH* T2JV* 1 color display off-delay * Lead wire Blank 1 m (standard) 3 3 m (option) 5 5 m (option) Note: 5 mm lead wire for F switch is custom order product. Variation: G2L, G3L Switch model No. Lead wire straight Lead wire L-shaped Contact Proximity Voltage Display Lead wire T2YLH* T2YLV* DC 2 color display T3YLH* T3YLV* 3 line * Lead wire Blank 1 m (standard) 3 3 m (option) 5 5 m (option) 37

43 FP1 FP2 MEMO 38

44 Compact cylinder (large bore size) SSD2-FP1 Bore size: φ 125/φ 14/φ 16/φ 18/φ 2 NSF H1 Pneumatic Cylinders I Catalog No. CB-29SA Specifications SSD2 (large bore size) Bore size mm φ 125 φ 14 φ 16 φ 18 φ 2 Actuation Working fluid Double acting Compressed air Max. working pressure MPa 1..7 Min. working pressure MPa.5 Proof pressure MPa Ambient temperature C -1 to 6 (no freezing) Port size Rc3/8 Rc1/2 Stroke tolerance mm Working piston speed mm/s 5 to 3 2 to 3 Cushion Lubrication +2. Rubber cushion (standard) Not required Max. absorbed Rubber cushion Energy J No cushion - Note 1: Described in above is specification of double acting/single rod. Each description varies depending on variation. Refer to Pneumatic Cylinders I (CB-29SA) for details. Stroke Bore size (mm) Standard stroke (mm) Max. stroke (mm) Min. stroke (mm) φ 125 φ 14 φ 16 φ 18 φ 2 1, 2, 3, 4, 5 75, 1, 125, , 2, 25, Note 1: When using the type with switch, refer to the table of Quantity of installed switches and the min. stroke. 39

45 How to order Without switch SSD2 2 1 N FP1 With switch SSD2 L 2 1 TH R N FP1 A Variation B Bore size C Port thread type D Stroke Note on model No. selection Note 1: Switches are shipped with the product. Contact CKD assembly when shipping is required. Note 2: Stroke less than 5 mm for 1 color display and stroke less than 1 mm is not available for 2 color display, off-delay, AC magnetic field, or types with T1* or T8* switches. Refer to Pneumatic Cylinders I (CB-29SA) for Quantity of installed switches and the min. stroke. Note 3: Special total length for custom stroke is provided when a custom stroke is used. [Example of model No.] SSD2-L-2-1-TH-R-NFP1 Model: Compact cylinder (large bore size), grade grease specifications for food A Variation : Double acting, basic/switch B Bore size : 2 mm C Port thread type : Rc thread D Stroke : 1 mm E Switch model No. : Reed TH switch/lead wire 1 m F Switch quantity : 1 (on rod end) G Option : Rod end male thread E Switch model No. Note 1 F Switch quantity G Option SSD2-FP1 (large bore size) How to order Code A Variation Blank Double acting/single rod L Double acting/single rod/switch D Double acting/double rod DL Double acting/double rod/switch B C D Bore size (mm) 125 φ φ φ φ 18 2 φ 2 Port thread type Blank Rc thread NN NPT thread (φ 125 to φ 16) (custom order product) GN G thread (φ 125 to φ 16) (custom order product) Stroke (mm) Refer to the stroke table on page 39. E Switch model No. Lead wire Lead wire Voltage Lead Display Straight L-shaped AC DC Line TOH* TV* 1 color display T5H* T5V* No indicator lamp T8H* T8V* 1 color display T1H* T1V* T2H* T2V* 1 color display T3H* T3V* T3PH* T3PV* 1 color display (custom) 3 line T2WH* T2WV* T2YH* T2YV* 2 color display T3WH* T3WV* 3 line T3YH* T3YV* T2JH* T2JV* 1 color display off-delay T2YD* - 2 color display T2YDT* - AC magnetic field * Lead wire Blank 1 m (standard) 3 3 m (option) 5 5 m (option) F G Switch quantity R 1 (on rod end) H 1 (on head end) D 2 Option Blank N Contact Reed Proximity Rod end female thread Rod end male thread FP1 FP2 4

46 Pneumatic Cylinders II Catalog No. CB-3SA Guided cylinder STG-M-FP1 Bore size: φ 12/φ 16/φ 2/φ 25/φ 32/φ 4 φ 5/φ 63/φ 8/φ 1 JIS symbol NSF H1 Specifications STG-M Bore size mm φ 12 φ 16 φ 2 φ 25 φ 32 φ 4 φ 5 φ 63 φ 8 φ 1 Actuation Working fluid Double acting Compressed air Max. working pressure MPa 1. Min. working pressure MPa.15.1 Proof pressure MPa 1.6 Ambient temperature C -1 to 6 (no freezing) Port size M5 Rc1/8 Rc1/4 Rc3/8 Stroke tolerance mm Working piston speed mm/s 5 to 5 5 to 3 Cushion Lubrication +2. Rubber cushion Not required Max. energy absorption J Note 1: Described in above is specification of double acting/single rod. Each description varies depending on variation. Refer to Pneumatic Cylinders I (CB-29SA) for details. Variation: blank Bore size Standard stroke (mm) Max. stroke (mm) Min. stroke (mm) Min. stroke/switch (mm) Variation: G Bore size Standard stroke (mm) Max. stroke (mm) Min. stroke (mm) Min. stroke/switch (mm) φ 12 1/2/3/4/5/75/1 φ 2 2/3/4/5/75/1/ φ /15/175/2/25 φ 25 15/175/2/25/3/35/4 φ 2 2/3/4/5/75/1/125 φ 32 25/5/75/1 5 (1) 4 5 φ 25 15/175/2/25/3/35/4 φ 4 125/15/175 Note 2 φ 32 5 (1) φ 5 2/25/3 5 φ 4 Note 2 35/4 25/5/75/1 φ 63 4 φ 5 125/15/175 Note 1: The custom stroke is available in 5 mm increments. However, the total φ 63 2/25/3 dimensions are the same as the longer standard stroke. Note 2: The value indicates for types with one or two switches. The value in ( ) is the φ 8 35/4 min. stroke for switches of 2 color display, AC magnetic field tolerant types. φ 1 Note 1: The custom stroke is available in 5 mm increments. However, the total dimensions are the same as the longer Variation: G2, G3 Bore size Standard stroke (mm) Max. stroke (mm) Min. stroke (mm) Min. stroke/switch (mm) standard stroke.the dedicated whose dimensions are matched to the stroke is available. Contact CKD for details. Note 2: The value indicates for types with one or two switches. The value in ( ) is the min. stroke for switches of 2 color display, AC magnetic field tolerant types. φ 2 φ 25 2/3/4/5/75/1/125 15/175/2/25/3/35/4 Rubber air cushioned (*C) φ 32 25/5/75/ Bore size Standard stroke (mm) Max. stroke (mm) Min. stroke (mm) Min. stroke/switch (mm) φ 4 125/15/175 Note 2 φ 32 25/5/75/1 φ 5 2/25/3 5 (1) φ 4 125/15/ /4 φ 63 4 Note 2 φ 5 2/25/3 Note 1: The custom stroke is available in 5 mm increments. However, the total φ 63 35/4 1 1 dimensions are the same as the longer standard stroke. Note 2: The value indicates for types with one or two switches. Note 1: The custom stroke is available in 5 mm increments. However, the total dimensions are the same as the longer standard stroke. Note 2: The value indicates for types with one or two switches. The value in ( ) is the min. stroke for switches of 2 color display, AC magnetic field tolerant types. Variation: G5 Bore size Standard stroke (mm) Max. stroke (mm) Min. stroke (mm) Min. strokes/switch (mm) 41 Stroke Variation: C Bore size Standard stroke (mm) Max. stroke (mm) Min. stroke (mm) Min. stroke/switch (mm) φ 16 25/5/75/1/125/15/175/2/25 25 φ 2 φ 25 25/5/75/1 15 φ /15/ Note 2 φ 4 2/25/3 35/4 φ 5 φ 63 Note 1: Custom stroke is available per mm. However, the total dimensions are the same as the longer standard stroke. (Custom order) Note 2: As the product with min. stroke or less cannot obtain the cushion effect, select the basic type. φ 2 φ 25 2/3/4/5/75/1/125/ 15/175/2/25/3/35/4 φ 32 φ 4 25/5/75/1 φ 5 125/15/175 φ 63 2/25/3 φ 8 35/4 φ (1) Note 2 Note 1: The custom stroke is available in 5 mm increments. However, the total dimensions are the same as the longer standard stroke. Note 2: The value indicates for types with one or two switches. The value in ( ) is the min. stroke for switches of 2 color display, AC magnetic field tolerant types.

47 How to order Without switch STG With switch STG M C M C T2H R FP1 FP1 STG-M-FP1 How to order Model No. A Bearing type B Variation C Bore size [Example of model No.] STG-MC-4-75-TH-D-FP1 D Port thread type E Stroke F Switch model No. G Switch quantity Model No.: Guided cylinder, grade grease specifications for food A Bearing type : Metal bush bearing B Variation : Air cushion C Bore size : φ 4 mm D Port thread type : Rc thread E Stroke : 75 mm F Switch model No. : Reed TH switch, lead wire 1 m G Switch quantity : 2 Code A Bearing type M Metal bush bearing B Variation Blank Double acting/single rod C Double acting/air cushioned G Double acting/rubber scraper G2 Double acting/coolant proof (packing seal material NBR) G3 Double acting/coolant proof (packing seal material FKM) G5 Double acting/environment-resistant scraper C Bore size (mm) 12 φ φ 16 2 φ 2 25 φ φ 32 4 φ 4 5 φ 5 63 φ 63 8 φ 8 1 φ 1 D Port thread type M5 (φ 12 to φ 16) Blank Rc thread (φ 2 to φ 1) NN NPT thread ( φ 2) (custom order product) GN G thread ( φ 2) custom order product E Stroke (mm) Refer to the stroke table on page 41. F Switch model No. Refer to the switch model No. on page 44. G Switch quantity R 1 (on rod end) H 1 (on head end) D 2 T 3 FP1 FP2 42

48 43 STG-M-FP1 How to order Without switch STG With switch STG Model No. M M A Bearing type Note 1: Switches other than E switch model No. are also available. (Custom order product) Refer to Pneumatic Cylinders I (No.CB-29SA) for details. Note 2: Switches are shipped with the product. Contact CKD when assembling before shipment is necessary. C C B Bore size [Example of model No.] STG-M-32C-5-TH-R-FP1 Model No.: Guided cylinder with rubber air cushion, grade grease specifications for food A Bearing type : Metal bush bearing B Bore size : φ 32 mm C Port thread type : Rc thread D Stroke : 5 mm E Switch model No. : Reed TH switch, lead wire 1 m F Switch quantity : 1 (on rod end) T2H R C Port thread type Rubber air cushioned Note on model No. selection D Stroke FP1 FP1 E Switch model No. Note 1 Note 2 F Switch quantity Code A Bearing type M Metal bush bearing B Bore size (mm) 32 φ 32 4 φ 4 5 φ 5 63 φ 63 C Port thread type Blank Rc thread N NPT thread (custom order product) G G thread (custom order product) D Stroke (mm) Refer to the stroke table on page 41. E Switch model No. Lead wire Lead wire Voltage Lead Contact Display straight L-shaped AC DC wire TH* TV* 1 color display T5H* T5V* Reed No indicator lamp T8H* T8V* 1 color display T1H* T1V* T2H* T2V* 1 color display T3H* T3V* 3 line T3PH* T3PV* 1 color display (custom) 3 line T2WH* T2WV* T2YH* T2YV* Proximity 2 color display T3WH* T3WV* 3 line T3YH* T3YV* T2JH* T2JV* 1 color display off-delay T2YD* - 2 color display T2YDT* - for AC magnetic field * Lead wire Blank 1 m (standard) 3 3 m (option) 5 5 m (option) F Switch quantity R 1 (on rod end) H 1 (on head end) D 2 T 3

49 Switch model No. Variation: blank, C, G, G5 Switch model No. Lead wire straight TH* Lead wire L-shaped TV* Contact Reed Voltage AC DC Display 1 color display T5H* T5V* No indicator lamp T8H* T8V* 1 color display T1H* T2H* T1V* T2V* Proximity 1 color display Lead wire T3H* T3V* 3 line T2WH* T2YH* T3WH* T3YH* T2WV* T2YV* T3WV* T3YV* 2 color display 3 line T3PH* T3PV* 1 color display (custom) 3 line T2YD* - 2 color display T2YDT* - AC magnetic field * Lead wire Blank 1 m (standard) 3 3 m (option) 5 5 m (option) Note :Switches are shipped with the product. Contact CKD when assembling before shipment is necessary. STG-M-FP1 Switch model No. FP1 FP2 Variation: G2, G3 Switch model No. Lead wire straight Lead wire L-shaped Contact Proximity Voltage AC DC Display Lead wire T2YLH* T2YLV* 2 color display T3YLH* T3YLV* 3 line * Lead wire Blank 1 m (standard) 3 3 m (option) 5 5 m (option) 44

50 Pneumatic Cylinders I Catalog No. CB-29SA Rodless cylinder SRL3-FP1 Bore size: φ 12, φ 16, φ 2, φ 25, φ 32 φ 4, φ 5, φ 63, φ 8, φ 1 equiv. JIS symbol NSF H1 Specifications SRL3 Bore size mm φ 12 φ 16 φ 2 φ 25 φ 32 φ 4 φ 5 φ 63 φ 8 φ 1 Actuation Double acting Working fluid Compressed air Max. working pressure MPa.7 Min. working pressure MPa.2 (.25) Note 2.1 (.15) Note 2.5 (.1) Note 2 Proof pressure MPa 1.5 Ambient temperature C 5 to 6 Port size M5 Rc1/8 Rc1/4 Rc3/8 Rc1/2 Stroke tolerance mm ( to 1), ( to 3), ( to 5) Working piston speed mm/s 5 to 2 (standard piping) (Note 1) Cushion Air cushion Lubrication Not required Note 1: For common port piping, working piston speed varies depending on stroke. Contact CKD. Note 2: ( ) indicates resin guide. Note 3: Described in above is specification of double acting basic. Each description varies depending on variation. Refer to Pneumatic Cylinders I (CB-29SA) for details. Maximum energy absorption Bore size Cushioned No cushion Shock absorber (initial set value) (mm) Max. energy absorption (J) Cushion stroke (mm) Max. energy absorption (J) Absorbed energy (J) Effective stroke (mm) φ 12 equiv φ 16 equiv φ 2 equiv φ 25 equiv φ 32 equiv φ 4 equiv φ 5 equiv φ 63 equiv φ 8 equiv φ 1 equiv Stroke Bore size (mm) φ 12 equiv. φ 16 equiv. φ 2 equiv. φ 25 equiv. φ 32 equiv. φ 4 equiv. φ 5 equiv. φ 63 equiv. φ 8 equiv. φ 1 equiv. Standard stroke (mm) 2/3 4/5 6/7 8/9 1 Max. stroke (mm) * The custom stroke is available in 1 mm increments. Min. stroke (mm)

51 How to order Without switch SRL3 G 12 B With switch SRL3 G A Variation 2 B FP1 12 B 2 MH R B FP1 B Mounting style Note 1, Note 2 C Bore size F Stroke D Port thread type E Cushion Note on model No. selection G Switch model No. Note 4 Note 1: Mounting bracket will be shipped with the product. Note 2: For 12, 16, 2, 25 and 32 bore sizes with option "R" or "T", the mounting style will be "" or "LB1". (Piping with "LB" is not possible for options "R" and "T".) Note 3: Refer to Pneumatic Cylinders I (CB-29SA) for min. stroke with switch. Note 4: "*" of L* and N* indicates the number of sets. When more than one set are necessary, specify "L2" (for LB) or "N2" (for LB1). 2/set Note 5: For the port and cushion needle position symbols, refer to dimensions on Pneumatic Cylinders I (CB-29SA). Note 6: In the case of the standard type with φ 12 to φ 25, remove the cover, attach a flat nut and install the full stroke adjusting bracket. A flat nut is already included with option "A3" so that you can add the full stroke adjusting bracket without removing the cover. Note 7: In "H", the thread size for φ 12 and φ 16 will be "M4" and that for φ 2 will be "M5". Note 8: Check the option combinations in "Option selection table" on the next page. Note 9: Copper and PTFE free as standard. (Except for the type with shock absorber) Note 1: Operation oil contained in shock absorber is not graded for food. Note 11: Options Y or Y1 cannot be selected, when variation G is selected. [Example of model No.] SRL3-G--12B-2-MH-R-BFP1 Model No.: Rodless cylinder, grade grease specifications for food A Variation : With resin guide B Mounting style : Basic C Bore size : φ 12 mm D Port thread type : Rc thread E Cushion : Both sides cushioned F Stroke : 2 mm G Switch model No. : Reed switch MH, lead wire 1 m H Switch quantity : 1 on R-side I Option : Port position F, cushion needle position B H Switch quantity I Option Note 4, Note 5 Note 6, Note 7 Note 8, Note 1 Note 11 Code A Variation Blank Double acting G Resin guide B Mounting style Basic type LB Axial foot LB1 Axial foot (φ 12 to φ 32 only) C Bore size (mm) 12 φ φ 16 2 φ 2 25 φ φ 32 4 φ 4 5 φ 5 63 φ 63 8 φ 8 1 φ 1 SRL3-FP1 How to order D Port thread type Blank Rc thread N NPT thread ( φ 2) (custom order product) G G thread ( φ 2) (custom order product) Cushion B Both sides cushioned R R side cushioned L L side cushioned N No cushion E F Stroke (mm) Bore size Stroke Note 3 Custom stroke φ 12 to φ 1 1 to 5 Per mm G Switch model No. Indicator lamp Lead wire Lead wire straight Lead wire L-shaped Voltage AC DC MH* MV* 1 color display M5H* M5V* No indicator lamp M2H* M2V* 1 color display - M2WV* 2 color display M3H* M3V* 1 color display - M3WV* 2 color display 3 line M3PH* M3PV* 1 color display (custom) 3 line T2WH* T2WV* T2YH* T2YV* 2 color display 3 line T3WH* T3YH* T3WV* T3YV* T2YD* - 2 color display T2YDT* - AC magnetic field * Lead wire Blank 1 m (standard) 3 3 m (option) 5 5 m (option) Contact Reed Proximity H Switch quantity R 1 on R side L 1 on L side D 2 T (when there are more than 4 switches, indicate switch quantity.) I Option Bore size (φ) A Both-side full stroke adjustable, shock absorber A1 R-side full stroke adjustable, shock absorber A2 L-side full stroke adjustable, shock absorber A3 Full stroke adjustable/adjusting bracket to be added Y Floating fitting Y1 Thin floating fitting L* Intermediate support bracket (for, LB) N* Intermediate support bracket (for LB1) C C mount bracket H Larger thread for table installation U Height adjustment plate Blank F(standard) F(standard) R R (Common port) F B F B T R (Common port) B D D F S D D X F (Common port) F Port position Cushion needle position 46 FP1 FP2

52 SRL3-FP1 Option selection table Option : Available : Not available Option Both-side full stroke adjustable, shock absorber R-side full stroke adjustable, shock absorber L-side full stroke adjustable, shock absorber Full stroke adjustable/adjusting bracket to be added Floating fitting Thin floating fitting Intermediate support bracket (for, LB) Intermediate support bracket (for LB1) C mount bracket Larger thread for table installation Height adjustment plate Port position F, cushion needle position F (standard) Port position R, cushion needle position F (common port) Port position F, cushion needle position B Port position R, cushion needle position B (common port) Port position D, cushion needle position F Port position D, cushion needle position D Port position F, cushion needle position F (common port) Code A A1 A2 A3 Y Y1 L* N* C H U Blank R B T D S X A A1 A2 A3 Y Y1 L* N* C H U Blank R B T D S X Note 1: Some combinations are not available depending on the bore size. Be sure to check the I Option in "How to order" on the previous page. Note 2: LB1 with port position D is not possible. (φ 25, φ 32) 47

53 FP1 FP2 MEMO 48

54 Floating joint FJ-FP1 Applicable cylinder diameter: φ 2 to φ 2 NSF H1 Pneumatic Cylinders II Catalog No. CB-29SA Specifications Port size of Max. working tension and compression (kn) Note 1 Max. eccentricity Model No. thread pitch Basic Flange Foot (mm) FJ-*- 3 M M M M M M M M M M M M M M M M M M Oscillating angle Ambient temperature ±5-1 to 6 C Note 1: Max. working tension and compression shows static load. How to order 49 FJ 3 A Mounting [Example of model No.] FJ--3-FP1 FP1 B Port size of thread pitch Model: Floating joint, food grade grease A Mounting : Basic B Port size of thread pitch : M3 x.5 A Code Mounting Basic L F Foot Flange B Port size of thread pitch Mounting O L F 3 M3 x.5 4 M4 x.7 5 M5 x.8 6 M6 x 1. 8 M8 x M8 x M1 x M12 x M12 x M14 x M16 x M18 x M22 x M26 x M3 x M36 x M4 x M45 x 1.5

55 FP1 FP2 MEMO 5

56 Feather hand (mini-parallel hand) Double acting/single acting FH1-FP1 Operational stroke: 8, 11, 14, 18, 2 mm NSF H1 Pneumatic Cylinders II Catalog No. CB-3SA Double acting Single acting (normally open) 51 Specifications * Integrated speed controller is available only for double acting. FH1 FH11-D FH112-D FH116-D FH12-D FH125-D FH11- FH112- FH116- FH12- FH125- Actuation Double acting Single acting Working fluid Compressed air Max. working pressure MPa.7 Min. working pressure MPa Proof pressure MPa 1.5 Ambient temperature C 5 to 6 Port size M3.5 M5.8 M3.5 M5.8 Operational stroke mm Product weight g Repeatability (default) mm ±.3 Max. operating frequency cycle/sec. 3 Cushion Lubrication Option How to order Without switch FH1 With switch FH1 A 1 D Y1 B 1 D Bore size Y1 B Option T2H Small jaw Note 1 Note on model No. selection Note 1: Refer to pages Pneumatic Cylinders II (CB-3SA) for the dimensions and applicable model of the small jaw. When ordered as an option, two are included on delivery. Note 2: Switches other than D switch model No. are available. (custom order) Refer to Pneumatic Cylinders II (No.CB-3SA) for details. Note 3: When with end mount (model No. B), select switch with lead wire L-shaped (model No. T*V). The end mount is included with shipment. C R B D Switch model No. Note 2 * indicates lead wire. FP1 FP1 E Switch quantity F End mount Note 3 Opening direction rubber cushion Not required Proximity switch (2 wire/3 wire) * Closing speed controller Code A Bore size 1 φ 1 12 φ φ 16 2 φ 2 25 φ 25 B Option D Standard (double acting) O Single acting (normally open) Z Double acting integrated speed controller C Small jaw Blank No small jaw Y1 Small jaw material (S5C) Y2 Small jaw material (MC nylon) D Switch model No. Lead wire Lead wire Voltage Display Lead straight L-shaped AC DC wire T2H* T2V* 1 color T3H* T3V* display 3 line * Lead wire Blank 1 m (standard) 3 3 m (option) 5 5 m (option) E Switch quantity R One on right (port) side opening position D 2 F End mount Blank No end mount B End mount Contact Proximity

57 performance data that functions to open and close with jaw length l of hand at supply pressure.15 to.7 MPa is shown. Opening direction ( ) (shown with broken line) Closing direction ( ) (shown with continuous line) l (Note) Single acting closing grip power is decreased by 25 to 3% compared to the double acting type. FH MPa opening 1.7 MPa closing.5 MPa opening.5 MPa closing 5.3 MPa opening.3 MPa closing.15 MPa opening.15 MPa closing Length of jaw (l) (cm) FH Restriction range for length of jaw l FH11 Air pressure (MPa) FH11 FH112 FH12 5 FH116 FH12 FH1-FP1 performance data When selecting, read the precautions for design and selection on Pneumatic Cylinders II (CB-3SA)..7 MPa opening.7 MPa closing.5 MPa opening.5 MPa closing.3 MPa opening.3 MPa closing.15 MPa opening.15 MPa closing Length of jaw (l) (cm) (l) FH125 1 (cm).7 MPa opening.7 MPa closing.5 MPa opening.5 MPa closing.3 MPa opening.3 MPa closing.15 MPa opening.15 MPa closing Length of jaw (l) (cm) MPa opening.7 MPa closing.5 MPa opening.5 MPa closing.3 MPa opening.3 MPa closing.15 MPa opening.15 MPa closing Length of jaw (l) (cm) FP1 FP2 FH MPa opening 5.7 MPa closing 4.5 MPa opening 3.5 MPa closing.3 MPa opening 2.3 MPa closing 1.15 MPa opening.15 MPa closing Length of jaw (l) (cm) 52

58 Pneumatic Cylinders II Catalog No. CB-3SA Compact cross roller parallel hand Double acting/single acting BHA-FP1 Operational stroke: 5, 9, 11, 15 mm Double acting Single acting (normally open) Single acting (normally closed) NSF H1 Specifications BHA Size 1CS1 3CS1 4CS1 5CS1 Bore size mm φ 12 φ 16 φ 2 φ 25 Actuation Double acting/single acting Working fluid Compressed air Max. working pressure MPa.7 Double acting.1 Min. working Normally open pressure MPa.3 Normally closed Ambient temperature C 5 to 6 Port size M3 M5 Operational stroke mm Rod diameter mm φ 6 φ 8 φ 1 φ 12 Capacity of reciprocating cm Repeatability mm ±.1 Product weight kg Lubrication Not required How to order Without switch BHA With switch BHA 1CS1 1CS1 A Size O O T2H Option Note 1 Note on model No. selection Note 1: 2 pieces of small jaws are provided for options Y1, Y2. Note 2: Refer to Pneumatic Cylinders II (CB-3SA) for switches other than listed above. B R FP1 FP1 C Switch model No. * indicates lead wire. D Switch quantity Code A Size 1CS1 3CS1 4CS1 5CS1 B Option Blank Standard (double acting) O Single acting (normally open) C Single acting (normally closed) Y1 Small jaw material (S5C) Y2 Small jaw material (MC nylon) C Switch model No. Lead wire Lead wire Voltage Display Lead straight L-shaped AC DC wire T2H* T2V* 1 color T3H* T3V* display 3 line Contact Proximity * Lead wire Blank 1 m (standard) 3 3 m (option) 5 5 m (option) D Switch quantity R 1 on opening side H 1 on closing side D 2 53

59 performance data that functions to open and close with jaw length l of hand at supply pressure.3,.5 and.7 MPa is shown. Opening direction ( ) (shown with broken line) Closing direction ( ) (shown with continuous line) l (Note) O type gripping power decreases approximately 2 to 3% in the closing direction compared to the double acting type. C type gripping power decreases approximately 1 to 2% in the opening direction compared to the double acting type. When selecting, read the precautions for design and selection on Pneumatic Cylinders II (CB-3SA). BHA-1CS1 BHA-4CS MPa opening.7 MPa opening Length of jaw (l).7 MPa closing.5 MPa opening.5 MPa closing.3 MPa closing 1 (cm).7 MPa opening.7 MPa closing.5 MPa opening.5 MPa closing.3 MPa opening.3 MPa closing BHA-FP1 performance data BHA-3CS1 BHA-5CS MPa opening.5 MPa closing Length of jaw (l).7 MPa opening.7 MPa closing.5 MPa opening.3 MPa closing.7 MPa opening 1 (cm).7 MPa closing.5 MPa opening.5 MPa closing.3 MPa opening.3 MPa closing FP1 FP Length of jaw (l) 1 (cm) Length of jaw (l) (cm) 54

60 Pneumatic Cylinders II Catalog No. CB-3SA Compact cross roller parallel hand with rubber cover Double acting/single acting BHG-FP1 Operating stroke: 5, 9, 11, 15 mm Double acting Single acting (normally open) Single acting (normally closed) NSF H1 Specifications Size 1CS 3CS 4CS 5CS Bore size mm φ 12 φ 16 φ 2 φ 25 Actuation Working fluid BHG Double acting/single acting Compressed air Max. working pressure MPa.7 Min. working pressure Double acting.15 Normally open MPa Normally closed Ambient temperature C 5 to 6 Port size M3 M5 Operating stroke mm Rod diameter mm φ 6 φ 8 φ 1 φ 12 Volumetric capacity (reciprocation) cm Repeatability mm ±.1 Weight kg Lubrication Rubber cover.3 Not required Material conforming to the Food Sanitation Act (silicone rubber), blue How to order Without switch (integrated magnet for switch) BHG BHG 1CS 1CS O O FP1 With switch (integrated magnet for switch) A Size T2H B Option Note 1 R FP1 C Switch model No. Precautions for model No. selection D Switch quantity Note 1: For the small jaw of option Y1 and Y2, two are included on delivery. Note 2: Refer to Pneumatic Cylinders II (CB-3SA) for switches other than those listed here. Code A Size 1CS 3CS 4CS 5CS B Option Blank Standard (double acting) O Single acting (normally open) C Single acting (normally closed) Y1 Small jaw (Material S5C) Y2 Small jaw (Material MC nylon) C Switch model No. Axial lead Radial lead Voltage Lead Display wire wire AC DC wire T2H* T2V* 1-color 2-wire T3H* T3V* display 3-wire * Lead wire 3-wire Blank 1 m (standard) 3 3 m (option) 5 5 m (option) D Contact Proximity Switch quantity R 1 on opening side H 1 on closing side D 2 55

61 Rubber cover part model No. Size Part model No. Part No. 1CS BHG-1K-FP1 3CS BHG-3K-FP1 4CS BHG-4K-FP1 25 5CS BHG-5K-FP1 BHG-FP1 performance data performance data The gripping power in the opening/closing directions BHG-1CS with jaw length l of hand with a supply pressure of.3,.5 and.7 MPa is shown. Opening direction ( ) (shown with broken line) 3 Closing direction ( ) (shown with continuous line).7 MPa opening.7 MPa closing l 2.5 MPa opening 1.3 MPa opening.5 MPa closing.3 MPa closing Length of jaw (l) (cm) BHG-3CS MPa opening.7 MPa closing.5 MPa opening.3 MPa opening.5 MPa closing.3 MPa closing Length of jaw (l) (cm) FP1 FP2 (Note) O type gripping power decreases approximately 2 to 3% in the closing direction compared to the double acting type. C type gripping power decreases approximately 1 to 2% in the opening direction compared to the double acting type. When making a selection, read the precautions for design and selection in Pneumatic Cylinders II (CB-3SA). BHG-4CS 6.7 MPa opening.7 MPa closing 4.5 MPa opening.5 MPa closing.3 MPa opening 2.3 MPa closing Length of jaw (l) (cm) BHG-5CS MPa opening.7 MPa opening.7 MPa closing Length of jaw (l).5 MPa opening.5 MPa closing.3 MPa closing 2 (cm) 56

62 Pneumatic Cylinders II Catalog No. CB-3SA Compact wide parallel hand (standard/long stroke) HMF-FP1 NSF H1 Operational stroke: Standard 3, 4, 5, 7, 1 mm Long stroke: 6, 8, 1, 12, 16, 2 mm Double acting Specifications HMF-12CS HMF-16CS HMF-2CS HMF-25CS HMF-32CS HMF-4CS Standard L1 L2 Standard L1 L2 Standard L1 L2 Standard L1 L2 Standard L1 L2 Bore size mm φ 12 2 φ 16 2 φ 2 2 φ 25 2 φ 32 2 φ 4 2 Working fluid Compressed air Max. working pressure MPa.7 Min. working pressure MPa.3 Ambient temperature C 5 to 6 Port size M5 Rc1/8 Operational stroke mm Rod diameter mm φ 6 φ 8 φ 1 φ 12 φ 16 φ 2 Capacity of reciprocating cm Repeatability mm ±.1 Product weight kg Lubrication Not required How to order HMF 32CS L1 T2H R FP1 A Size B Option Note 1 Note on model No. selection Note 1: 12CS is not available for long stroke "L1", "L2". C Switch model No. D Switch quantity Code A Size 12CS 16CS 2CS 25CS 32CS 4CS B Option Blank Standard L1 Long stroke 1 L2 Long stroke 2 C Switch model No. Lead wire Lead wire Voltage Display Lead straight L-shaped AC DC wire T2H* T2V* 1 color T3H* T3V* display 3 line * Lead wire Blank 1 m (standard) 3 3 m (option) 5 5 m (option) Contact Proximity D Switch quantity R 1 on opening side H 1 on closing side D 2 Note: Refer to Pneumatic Cylinders II (CB-3SA) for switches other than listed above. 57

63 performance data HMF-FP1 performance data that functions with jaw length l of hand at supply pressure.3,.5 and.7 MPa is shown. Both opening direction ( ) closing direction ( ) (shown with continuous line) (Note) When selecting, read the precautions for design and selection on Pneumatic Cylinders II (CB-3SA). HMF-12CS l HMF-16CS HMF-2CS FP1 FP MPa open/close.5 MPa open/close.3 MPa open/close MPa open/close.5 MPa open/close.3 MPa open/close MPa open/close.5 MPa open/close.3 MPa open/close Length of jaw (l) 5 (cm) Length of jaw (l) 1 (cm) Length of jaw (l) 1 (cm) HMF-25CS HMF-32CS HMF-4CS MPa open/close.5 MPa open/close.3 MPa open/close MPa open/close.5 MPa open/close.3 MPa open/close MPa open/close.5 MPa open/close.3 MPa open/close Length of jaw (l) (cm) Length of jaw (l) (cm) Length of jaw (l) (cm) 58

64 Feather hand (mini-fulcrum hand) Double acting/single acting FH5-FP1 Opened / closed angles: 2 at opened, -5 at closed NSF H1 Pneumatic Cylinders II Catalog No. CB-3SA Double acting Single acting (normally open) Specifications FH5 FH51-D FH512-D FH516-D FH52-D FH51-O FH512-O FH516-O FH52-O Actuation Double acting Single acting Working fluid Compressed air Max. working pressure MPa.7 Min. working pressure MPa Proof pressure MPa 1.5 Ambient temperature C 5 to 6 Port size M3 M5 M3 M5 Opened / closed angles Degree 2 at opened -5 at closed Product weight g Repeatability (default) mm ±.3 Max. operating frequency cycle/sec. 3 Cushion Opening direction rubber cushion Lubrication Not required Option Proximity switch (2 wire/3 wire) * Closing speed controller, end mount * Integrated speed controller is available only for double acting. How to order Without switch FH5 With switch FH5 A 1 D Y1 B 1 D Y1 T2V R B Bore size B Option C Small jaw Note 1 Note on model No. selection Note 1: Refer to pages Pneumatic Cylinders II (CB-3SA) for the dimensions and applicable model of the small jaw. When ordered as an option, two are included on delivery. Note 2: Switches other than D switch model No. are available. (custom order) Refer to Pneumatic Cylinders II (No.CB-3SA) for details. Note 3: When with end mount (model No. B), select switch with lead wire L-shaped (model No. T*V). The end mount is included with shipment. FP1 FP1 D Switch model No. Note 2 * indicates lead wire. E Switch quantity F End mount Note 3 Code A Bore size 1 φ 1 12 φ φ 16 2 φ 2 B Option D Double acting O Single acting (normally open) Z Double acting integrated speed controller C Small jaw Blank No small jaw Y1 Small jaw material (S5C) Y2 Small jaw material (MC nylon) D Switch model no. Lead wire Lead wire Voltage Display Lead straight L-shaped AC DC wire T2H* T2V* 1 color T3H* T3V* display 3 line Contact Proximity * Lead wire 3 wires Blank 1 m (standard) 3 3 m (option) 5 5 m (option) E Switch quantity R 1 on opening side H 1 on closing side D 2 F End mount Blank No end mount B End mount 59

65 performance data FH5-FP1 performance data that functions to open and close with jaw length l of hand at supply pressure.15 to.7 MPa is shown. Opening direction ( ) (shown with broken line) Closing direction ( ) (shown with continuous line) l (Note) Single acting closing grip power is decreased by 25 to 3% compared to the double acting type. When selecting, read the precautions for design and selection on Pneumatic Cylinders II (CB-3SA). FH51 FH MPa opening.7 MPa closing.5 MPa opening.5 MPa closing.3 MPa opening.3 MPa closing.15 MPa opening.15 MPa closing Length of jaw (l) FH516 FH MPa opening.7 MPa closing.5 MPa opening.5 MPa closing 5 (cm).3 MPa opening.3 MPa closing.15 MPa opening.15 MPa closing MPa opening.7 MPa closing.5 MPa opening.5 MPa closing.3 MPa opening.3 MPa closing.15 MPa opening.15 MPa closing Length of jaw (l).7 MPa opening.7 MPa closing.5 MPa opening.5 MPa closing 5 (cm).3 MPa opening.3 MPa closing.15 MPa opening.15 MPa closing FP1 FP Length of jaw (l) 5 (cm) Length of jaw (l) 5 (cm) 6

66 3-way jaw bearing chuck Double acting/single acting CKG-FP1 NSF H1 Pneumatic Cylinders II Catalog No. CB-3SA Operating stroke: 6, 8, 11, 16 mm Double acting Single acting (normally open) Single acting (normally closed) Specifications CKG Size 16CS 25CS 32CS 4CS 5CS Bore size mm φ 16 φ 25 φ 32 φ 4 φ 5 Actuation Double acting/single acting Working fluid Compressed air Max. working pressure MPa.7 Min. working pressure Note MPa Double acting.1 Normally open Normally closed.3 Ambient temperature C 5 to 6 Port size M5 Operating stroke mm Rod diameter mm φ 9 φ 1 φ 14 φ 18 φ 2 Volumetric capacity (reciprocation) cm Repeatability mm ±.1 Weight kg Lubrication Not required Rubber cover Material conforming to the Food Sanitation Act (silicone rubber), blue Note: When a rubber cover (option) is included, the min. working pressure is.2 MPa for 16CS and.15 MPa for 25CS to 5CS. How to order Without switch (integrated magnet for switch) CKG 16CS O FP1 With switch (integrated magnet for switch) CKG 16CS O T2H R A Size *1 Select G for option B to attach a silicone rubber cover. Option Note 1, Note 2 Precautions for model No. selection Note 1: Y11 and Y21 are available for CKG-16CS, while Y11, Y12, Y21 and Y22 are available for CKG-25CS to 4CS, and Y11 and Y21 are available for CKG-5CS. Note 2: Refer to Pneumatic Cylinders II (CB-3SA) for the dimensions and applicable model of the small jaw. When ordered as an option, three are included at shipment. Note 3: C Switches other than switch model No. are also available. (Custom order) Refer to Pneumatic Cylinders II (CB-3SA) for details. B C FP1 Switch model No. Note 3 D Switch quantity Code A Size 16CS 25CS 32CS 4CS 5CS B Option Blank Standard (double acting) O Single acting (normally open) C Single acting (normally closed) G Rubber cover (silicone-based) *1 Small jaw (Material S5C) Y11 Outer mount chuck (small jaw No.: 54 to 71) Small jaw (Material S5C) Y12 Inner mount chuck (small jaw No.: 61 to 63) Smalll jaw (Material MC nylon) Y21 Outer mount chuck (small jaw No.: 51 to 54, 71) Small jaw (Material MC nylon) Y22 Inner mount chuck (small jaw No.: 61 to 63) C Switch model No. Axial lead wire Radial lead wire Contact Voltage AC DC Display Lead wire T2H* T2V* 1-color 2-wire T3H* T3V* display 3-wire * Lead wire Blank 1 m (standard) 3 3 m (option) 5 5 m (option) D Switch quantity R 1 on opening side H 1 on closing side D 2 Proximity 61

67 performance data that functions to open and close with jaw length l of hand at supply pressure.3,.5 and.7 MPa is shown. Opening direction ( ) (shown with broken line) Closing direction ( ) (shown with continuous line) CKG-FP1 performance data CKG-16CS CKG-25CS l (Note) O type gripping power decreases approximately 2 to 3% in the closing direction compared to the double acting type. C type gripping power decreases approximately 1 to 2% in the opening direction compared to the double acting type. When making a selection, read the precautions for design and selection in Pneumatic Cylinders II (CB-3SA) Length of jaw (l).7 MPa opening.7 MPa closing.5 MPa opening.5 MPa closing.3 MPa opening.3 MPa closing 1 (cm) Length of jaw (l).7 MPa opening.7 MPa closing.5 MPa opening.5 MPa closing.3 MPa opening.3 MPa closing 1 (cm) FP1 FP2 CKG-32CS CKG-4CS CKG-5CS 12.7 MPa opening MPa opening Length of jaw (l).7 MPa closing.5 MPa opening.5 MPa closing.3 MPa opening.3 MPa closing 1 (cm) Length of jaw (l).7 MPa opening.7 MPa closing 1.5 MPa opening.5 MPa closing.3 MPa opening.3 MPa closing (cm) MPa closing.5 MPa opening.5 MPa closing.3 MPa opening.3 MPa closing 1 2 Length of jaw (l) (cm) 62

68 Powerful chuck CKL2-FP1 Operational stroke: 5, 6, 8, 1, 12, 16, 2, 23 mm NSF H1 Pneumatic Cylinders II Catalog No. CB-3SA Double acting Single acting (normally open) Single acting (normally closed) Specifications CKL2 Size 2CS 25CS 32CS 4CS 5CS 63CS 8CS 1CS Bore size mm φ 2 φ 25 φ 32 φ 4 φ 5 φ 63 φ 8 φ 1 Working fluid Compressed air Max. working pressure MPa.7 Min. working pressure MPa.3 Ambient temperature C 5 to 6 Port size M5 Rc1/8 Operating stroke mm Rod diameter mm φ 6 φ 8 φ 1 φ 12 φ 14 φ 16 φ 2 Volumetric capacity (reciprocation) cm Repeatability mm ±.1 Weight kg Lubrication Not required How to order Without switch (integrated magnet for switch) CKL2 CKL2 2CS 2CS O O FP1 With switch (integrated magnet for switch) A Size B T2H Option Note 1, Note 2 Note 1: The small jaw is commonly used for inner and outer diameter chucks. Note 2: Refer to Pneumatic Cylinders II (CB-3SA) for the dimensions and applicable model of the small jaw. When ordered as an option, three are included at shipment. R FP1 C Switch model No. Precautions for model No. selection D Switch quantity Code A Size 2CS 25CS 32CS 4CS 5CS 63CS 8CS 1CS B Option Blank Standard (double acting) O Single acting (normally open) C Single acting (normally closed) Y1 Small jaw (Material S5C) Y2 Small jaw (Material MC nylon) C Switch model No. Axial Radial Voltage Lead Display lead wire lead wire AC DC wire T2H* T2V* 1-color 2-wire T3H* T3V* display 3-wire * Lead wire Blank 1 m (standard) 3 3 m (option) 5 5m (option) D Contact Proximity Switch quantity R 1 on opening side H 1 on closing side D 2 63

69 performance data CKL2-FP1 performance data The gripping power in the opening/closing directions with jaw length l of hand with a supply pressure of.3,.5 and.7 MPa is shown. Opening direction ( ) (shown with broken line) Closing direction ( ) (shown with continuous line) l CKL2-2CS MPa opening.7 MPa closing.3 MPa closing Length of jaw (l).5 MPa opening.5 MPa closing.3 MPa opening 4 (cm) CKL2-25CS MPa closing.5 MPa closing.3 MPa opening.3 MPa closing 1 (Note) O type gripping power decreases approximately 2 to 3% in the closing direction compared to the double acting type. C type gripping power decreases approximately 1 to 2% in the opening direction compared to the double acting type. When making a selection, read the precautions for design and selection in Pneumatic Cylinders II (CB-3SA). 2 3 Length of jaw (l).7 MPa opening.5 MPa opening 4 (cm) CKL2-32CS 15.5 MPa opening MPa closing.3 MPa opening.3 MPa closing MPa opening 3 Length of jaw (l).7 MPa closing 4 (cm) FP1 FP2 CKL2-4CS CKL2-5CS CKL2-63CS 2.5 MPa closing 1.5 MPa opening.3 MPa opening.3 MPa closing MPa opening.7 MPa closing MPa opening.5 MPa opening 2.7 MPa closing.5 MPa closing.3 MPa opening.3 MPa closing MPa closing 2.7 MPa opening.7 MPa closing.5 MPa opening.3 MPa opening.3 MPa closing Length of jaw (l) (cm) Length of jaw (l) (cm) Length of jaw (l) (cm) CKL2-8CS CKL2-1CS MPa opening.7 MPa closing.5 MPa opening.5 MPa closing.3 MPa closing.3 MPa opening MPa closing.3 MPa closing.7 MPa opening.7 MPa closing.5 MPa opening.3 MPa opening Length of jaw (l) (cm) Length of jaw (l) (cm) 64

70 Powerful chuck CKLG2-FP1 Operational stroke: 5, 6, 8, 1, 12, 16, 2, 23 mm NSF H1 Double acting Single acting (normally open) Single acting (normally closed) Specifications CKLG2 Size 2CS 25CS 32CS 4CS 5CS 63CS 8CS 1CS Bore size mm φ 2 φ 25 φ 32 φ 4 φ 5 φ 63 φ 8 φ 1 Working fluid Compressed air Max. working pressure MPa.7 Min. working pressure MPa.3 Ambient temperature C 5 to 6 Port size M5 Rc1/8 Operating stroke mm Rod diameter mm φ 6 φ 8 φ 1 φ 12 φ 14 φ 16 φ 2 Volumetric capacity (reciprocation) cm Repeatability mm ±.1 Weight kg Lubrication Not required 65