HBL Series. Specifications. Switch specifications. Fulcrum hand Double acting/single acting. Open and close angle: -5 to 20. Descriptions 2CS 20 1C 15
|
|
- Ruth Griffith
- 5 years ago
- Views:
Transcription
1 FH1 G FH G A S F S/F Specifications Size Cylinder bore size mm Actuation Working fluid Max. working pressure MPa Min. working pressure MPa Ambient temperature C Port size Open angle Degree Rod diameter mm Capacity of reciprocating cm 3 Repeatability mm Product weight kg Lubrication Switch specifications Applications Output method Power voltage Load voltage/current Light Leakage current Maximum shock resistance Lead wire 1C..9 Double acting/single acting Series Open and close angle: - to Double acting/single acting Compressed air..3 to 6 - to.3 3CS Not required (when lubricating, use turbine oil Class 1 ISO VG32) Proximity 2 wire T2H/T2V Programmable controller to 3 VDC, to ma (Note 1) 1mA or less Standard 1m (oil resistant vinyl cabtire cable 2-conductor.2mm 2 ) LED (ON lighting) 9m/s2 Note 1: Max. load current above: ma at 2 C. The current will be lower than ma if ambient temperature around switch is higher than 2 C. ( to 1mA with 6 C) Proximity 3 wire CS Rc1/ T3H/T3V Programmable controller, relay NPN output 1 to 2 VDC 3 VDC or less, 1mA or less 1 A or less Standard 1m (oil resistant vinyl cabtire cable 2-conductor.2mm 2 ) 32
2 How to order Without switch A Size O O B Option Note 1 <Example of model number> --O-T2H-R T2H C Model: A Size : B Option : Single acting, normally open type C : Proximity T2H switch, lead wire 1m D Switch quantity : One on open side R D Switch quantity Note on model no. selection Note 1: Refer to pages to 13 for the dimensions and applicable model of the small jaw. When ordered as an option, two are included on delivery. How to order switch For switch T*H* Switch body + mounting bracket For switch T*V* Switch body + mounting bracket Series How to order Symbol A Size 1C 3CS CS B Option Blank Standard (double acting) O Single acting (normally open) C Single acting (normally closed) Y1 With small jaw material (SC) Y2 With small jaw material (MC nylon) C Axial Radial Lead Contact Indicator lead wire lead wire wire T2H* T3H* T2H SW T2H (Item above C) Switch body Switch body *Lead wire length Blank 1m (standard) 3 3m (option) m (option) D Switch quantity R H D Mounting bracket T2V* T3V* One on open side One on closed side Two T2V * SW T2V TV * T Mounting bracket 1 color Proximity indicator type 2-wire 3-wire FH1 G FH G A S F S/F Hand (Select either R (open) or H (closed) for sections marked with an asterisk (*).) 33
3 Series Dimensions -1C standard/o/c (for parallel) 3 (for parallel) 1 29 FH to 1 - depth 1 22 G FH - standard/o/c 23 (for parallel) (for parallel) (9) 2 32 (2) 1 G A S F 2-M to 6. 9 S/F Hand cut depth depth depth depth 1 2-M3 3
4 Series Dimensions -3CS standard/o/c FH1 9 (for parallel) (1) 3 (for parallel) 26 3 () 1 G to M6 depth 1 - depth depth 1. SPECIAL SERIAL D MADE IN JAPAN FH CS standard/o/c G A (for parallel) 9 (for parallel) 1 (9) 3 2 (2) S F S/F to M depth depth 2 -M6 depth SPECIAL SERIAL D MADE IN JAPAN Rc1/ 1 Rc1/ 36
5 FH1 G FH G A S F S/F Series Internal structure and parts list No Standard (double acting)/o (normally open) type C (normally closed) type * Spring of 1 is not contained in standard (double acting) type. Parts name Body Master key Operation axis Fulcrum axis Rod packing seal Piston A Piston packing seal Magnet performance data Material that functions to open and closed directions with jaw length of hand at supply pressure.3,. and. MPa is shown. Open direction ( ) (shown with broken line) Closed direction ( ) (shown with continuous line) (Note) O type gripping power decreases approximate to 3 % comparing to double acting type to closed direction. C type gripping power decreases approximate 1 to % comparing to double acting type to open direction. Grip performance data indicates the grip for one jaw. Since two jaws are used, double the grip in the graph when making a selection * -1C Remarks 3.MPa open.mpa closed.mpa open.mpa closed 1.3MPa open.3mpa closed -3CS 16 1 No Parts name Piston B Spring Cylinder Cylinder gasket Cylinder guard Piston Spring Cylinder MPa open.mpa closed.mpa open.mpa closed.3mpa open.3mpa closed Material (1CS) Acetar resin (2 to CS) (1CS) Acetar resin (2 to CS) CS 3 1 Remarks Only O type.mpa open.mpa closed.mpa open.mpa closed.3mpa open.3mpa closed MPa open.mpa closed.mpa open.mpa closed.3mpa open.3mpa closed 16 3
Lateral parallel hand Double acting. Operational stroke length: 20, 30, 40mm. 980m/s2
FH0 G G B H2 LB2 N/ S/F Specifications Size Cylinder bore size mm Actuation Working fluid Max. working pressure MPa Min. working pressure MPa Ambient temperature C Port size Operational stroke length mm
More informationHEP Series. Specifications. Switch specifications. Bearing parallel hand Double acting/single acting. Operational stroke length: 24, 36, 40, 50, 60mm
FH0 G G B FH0 G S F J H2 LB2 N/ S/F Specifications Descriptions Size Cylinder bore size mm ctuation Working fluid Max. working pressure MPa Min. working pressure MPa mbient temperature C Port size Operational
More informationHFP Series. Specifications. Switch specifications. Wide parallel hand Double acting. Operational stroke length: 20, 30, 40, 60mm.
FH0 G B FH0 G A S F J H2 N/ S/F Specifications Size Cylinder bore size mm Actuation Working fluid Max. working pressure MPa Min. working pressure MPa Ambient temperature C Port size Operational stroke
More informationCompressed air to
G G A S F J 2 N/ S/F Specifications escriptions Cylinder bore size Working fluid mm Max. working pressure MPa Min. working pressure MPa Ambient temperature C Port size Operational stroke length mm Rod
More informationLinear slide cylinder Double acting single rod type. Bore size: 4.5, 6, 8. Descriptions Bore size mm
Linear slide cylinder Double acting single rod type LCM Series Bore size:.5, 6, 8 JIS symbol Specifications Descriptions LCM Bore size mm.5 6 8 Actuation Double acting Working fluid Compressed air Max.
More informationMSDG Series. Axial space saving structure and precise guided type. High precision, high rigidity and space saving High precision guided
U SM2 Axial space saving structure and precise guided type Axial space saving Compact axial length Footprint reduced Long service life design (approximate 4 times (CKD comparison)) Oil impregnated copper
More informationPosition locking clamp cylinder. UCAC2 Series. Bore size: ø50, ø63. Double acting single rod type
Position locking clamp cylinder U2 Series : ø50, ø63 XXXXX Series Specifications JIS symbol Descriptions U2 mm ø50 ø63 ctuation Double acting Working fluid ompressed air Max. working pressure MPa 1.0 Min.
More informationCompact Cylinder SSD2 Series
Installation on four faces Compact Cylinder SSD2 Series Compact Cylinder SSD2 Series Wide variation COMPACT CYLIDER SSD2 SERIES Double acting double rod non-rotating type added! The cylinder switch can
More informationLight weight clamp cylinder CAC-N32/40 Series Light weight position locking clamp cylinder UCAC-N32/40 Series
Helping lighten welding jigs and other tools Light weight clamp cylinder CAC-N32/40 Series Light weight position locking clamp cylinder UCAC-N32/40 Series New product Light weight clamp cylinder CAC-N
More informationRotary actuator Rack & pinion type. Size: 8, 32, 63 Oscillating angle: 90, 180,
G V* H FH HP S2 H/ LH LHG HL/ HLG/ G HL HM G S *H H2 L2 N/ S/F Specifications escriptions Size ffective torque Note 1 N m ctuation Working fluid Max. working pressure MPa Min. working pressure Note 2 MPa
More informationFeatures. Maintenance is simplified with the separable scraper section adapter.
New Products Environment Resistant Scraper Type Cylinder SSD/STG-G5 Series New Product Features A fiber aggregate (lube keeping structure) has been mounted on the scraper cylinder. Fine dust not captured
More informationSeries variation. Rotary actuator (vane mechanism) RV3* Series. Compact (RV3*1 to RV3*30) : Standard, : Option, : Not available
F J H2 L2 N/ S/F Variation Standard type With valve ngle variable type Series variation ompact ( to ) Model no. RVS RV RVS RV RVS RV RVS2 RV2 RVS RV RVS V W RV V W RVS V W2 RV V W2 RVS V W RV V W RVS RV
More informationL1000/L3000/L4000/L8000-W Series
Lubricator standard white Series L1/L3/L4/L8-W Series Supplies fine oil mist. Port size: 1/8 to 1 JIS symbol Specifications Descriptions L1-W L3-W L4-W L8-W Appearance Working fluid Compressed air Max.
More informationMechanical power cylinder
Attaining thrust equivalent to a hydraulic cylinder -- with air pressure alone! New product Mechanical power cylinder MCP Series Mechanical power cylinder MCP Series CC-958A 1 Realize high thrust at any
More informationFree position locking flat and compact cylinder UFCD Series
Space-saving cylinder ensures safety during work in power failures or accidents. Free position locking flat and compact cylinder UFCD Series Free position locking flat and compact cylinder UFCD Series
More informationand High precision guide provided High cylinder position accuracy, and wide guide realizes radial moment resistant high rigid structure.
and For linear slide cylinder, wide and high precision guide is used. This is high precision actuator with increased operational reliability. (6, 8,, 6, 0, mm) High precision guide provided High cylinder
More informationACTUATORS GENERAL CATALOG
CAD drawing data catalog is available. ACTUATORS GENERAL CATALOG ROTARY ACTUATORS PISTON TYPE SERIES CONTENTS Features 1223 Specifications 1224 Inner Construction, Major Parts and Materials 1226 Order
More informationGUIDED CYLINDER STG SERIES
New Products GUIDED CYLINDER STG SERIES High precision High rigidity Ecological CC-7A New eco-friendly Guided cylinder STG Series ( to ) - Remove toxic substances and protect the environment by preventing
More informationDesign & Selection. Installation & Adjustment
U SM Series WRNING This product must not be used submerged in water, oil or powder, or where coolant, coolant fluid or swarf, etc., may come in contact. lways incorporate an interlock in the control circuit
More informationSuper-Mini Complete with Easy-to-Use Functions. Guided Cylinder. STM Series GUIDED CYLINDER STM SERIES CC-884A 1
Super-Mini Complete with Easy-to-Use Functions Guided Cylinder GUIDED CYLINDER STM SERIES CC-884A 1 Super-Mini Complete with Super-mini Guided Cylinder (ø6, ø10) with free installation and wide variations
More informationGuide with rated load approx. 1.5-fold higher incorporated!
Series SCP* U SM Guide with rated load approx..5fold higher incorporated! Workpiece installation on two faces High repetition accuracy Outstanding repetition accuracy attained with linear guide Single
More informationKing Of Valve Co.,Ltd.
Series variation Series Series Series variation SCP* SCP* U Variation Double acting lubrication type Double acting oil-free type, with switch Double acting Stroke adjustable type (Extended) Double acting
More informationMedium bore size cylinder Double acting, non-rotating type. CMK2-M Series. Bore size: 20, 25, 32, 40
U SM Specifications Double acting, nonrotating type M Series Bore size:,,, JIS symbol Note: alue when stroke length is 0 mm (excluding deflection of piston rod). Double acting nonrotating cylinder single
More informationElectric Cylinder. LZB/LZC Series. It can be operated like an air cylinder. LZB Series. LZC Series LEF LEJ LEL LEM LEY LES LER LEH 25A- LEC
Electric Cylinder LZB/LZC Series It can be operated like an air cylinder. LZB Series LZC Series Model LZB LZC Max. thrust Max. speed 196 N 0 mm/s Lead screw Slide screw: ø8, ø Lead: 2, 6, Stroke 25, 40,
More informationand High precision guide provided High cylinder position accuracy, and wide guide realizes radial moment resistant high rigid structure.
and For linear slide cylinder, wide and high precision guide is used. This is high precision actuator with increased operational reliability. (6, 8,, 6, 0, mm) High precision guide provided High cylinder
More information: 660 N. For material handling and clamping of small workpieces. CKZT25 -X2797 (Base Type) Power Clamp Cylinder INFORMATION. ø
For material handling and clamping of small workpieces INFORMATION Power Clamp Cylinder ø25 Compact Type 34 mm Lightweight Compact High clamping force Lock function 53 mm Lightweight Weight : 580 g Compact
More informationBore size: JSC3: φ40/φ50/φ63/φ80/φ100. JSC4: φ125/φ140/φ160/φ180
764 Min. stroke length with switch ( switch) Brake cylinder: Double acting, single rod/double acting, no-lubrication -N Series : JSC3: φ40/φ50/φ63/φ80/φ100 JSC4: φ125/φ140/φ160/φ180 JIS symbol Specifications
More information5 Port Pilot Operated Solenoid Valve Metal Seal, Plug-in/Non Plug-in. Flow characteristics (1) 1 4/2 (P A/B) 4/2 5/3 (A/B R1/R2)
For details about certified products conforming to international standards, visit us at www.smcworld.com. 5 Port Pilot Operated Solenoid Valve Metal Seal, Plug-in/Non Plug-in Model 2 position 3 position
More informationMagnetic Sizes mm
CATALOGUE > Release 8.7 > Series CGB guided parallel grippers Series CGB guided parallel grippers Running out of stock Magnetic Sizes 6-20 - 25-32 mm»» Guided mechanism which allows high repeatability»»
More information5 Port Solenoid Valve
5 Port Solenoid Valve Series VFR//4/5/6 Rubber Seal Series Variations Series Sonic conductance C [dm /(s bar)] Type of actuation Voltage position single type Passage: 4/ 5/ (A/B EA/EB) Electrical entry
More information3GA1/2/3, 4GA1/2/3 Series Applicable cylinder bore size: ø20 to ø100
MNE0 M Discrete master valve, manifold (metal base) Body porting GA/2/, GA/2/ Series Applicable cylinder bore size: ø20 to ø0 MN W2 WGB MNS0 MNS0 TB L2-/ SA/B0 SA/B KA/B F Common specifications Descriptions
More information5 Port Pilot Operated Solenoid Valve Rubber Seal, Plug-in/Non Plug-in. Standard Specifications. Fluid Operating pressure range
For details about certified products conforming to international standards, visit us at www.smcworld.com. Port Pilot Operated Solenoid Valve Rubber Seal, Plug-in/Non Plug-in Series VFR2 JIS Symbol type
More informationMYB1/MYG1 Series DC12V. Metal free 2, 3 port solenoid valve for chemical liquid
Metal free, port solenoid valve for chemical liquid MY/MYG Series NC (normally closed) type, universal type Working fluid: water, pure water, chemical liquids Port size: M JIS symbol MY ( port) : NC (normally
More informationRotary Actuator. New RoHS. New. Vane Type 10, 15, 20, 30, 40. Many combinations available! Series CRB 2. Standard type/series CRB2
Rotary Actuator Vane Type 1, 15, 2, 3, 4 Standard Type Free Mount Type Many combinations available! Standard type/series Piping ports are located on the flat surface. Fittings can be secured firmly, piping
More informationKONEX Pneumatic Modular Gripping System KONEX Gripping force Torque Piston force (extended)
KONEX Gripping force 100 N Torque 0.9 Nm Piston force (extended) 250 N Application example KONEX weight-reduced, modular gripping system for economical automation in assembly and production KONEX P 50
More informationSeries variation. STS/STL Series. Guided cylinder. STS/STL Series. : Standard, : Option, : Custom order, : Not available Bearing method.
eries variation Guided cylinder T/TL eries T/TL eries eries variation CP*2 CK2 CA2 C DC2 VC D2 D* JK/2 U J3 L LC HC R RL2 RG2 FC Variation Double acting single rod type Double acting stroke adjustable
More information1 Pneumatics. Transmitters VR4151 VR4152 VR1210 VR1220 VR1210F VR1220F VR1211F VR VR3200 VR3201 VR3100 VR3110
Best 1 Pneumatics Transmitters Relay valve P. 1900 Side piping: 30 x 53 x 91 Bottom piping: 30 x 8 x 91 VR151 VR152 Effective area (mm 2 ) Number of ports Function 7 5 Metal Spool Shuttle valve P. 1902
More informationMounting style. Custom stroke length (per mm) Max. stroke length (mm) Axial foot type. Basic type
U SM Series variation Variation ouble acting single rod type ouble acting nonrotating type Product introduction Model no. JIS symbol M Bush ry bearing ( ) Oilless metal (,, ) used. Stable operation can
More informationSeries RSH/RS1H. To stop pallets gently. Stopper cylinder with built-in shock absorber. Heavy Duty Stopper Cylinder. ø20, ø32 ø50, ø63, ø80
CAT.ES-118 B Heavy Duty Stopper Cylinder Series RSH/RS1H ø, ø ø, ø, ø To stop pallets gently Stopper cylinder with built-in shock absorber Heavy Duty Stopper Cylinder Series RSH/RS1H ø, ø ø, ø, ø To stop
More informationSeries VP4 50/4 70. Large Size 5 Port Solenoid Valve Rubber Seal SJ SY SY SV SYJ SZ VF VP4 S0700 VQ VQ4 VQ5 VQC VQC4 VQZ SQ VFS VFR VQ7 VP4
Type of actuation 4 Piping 0 Side ported Bottom ported 4 Without sub-plate Large Size 5 Port Solenoid Valve Rubber Seal Series 50/4 70 Series VP 5 port solenoid valve 5 7 position single position double
More informationTransmitters: Relay Valve VR4151/4152
Relay Valve VR4151/4152 Appropriate output sequences are affected according to the signal received from the mechanical valve. VR4151 VR4152 Precautions Be sure to read before handling. Refer to pages 5-11-2
More informationCircuit of directional control valve and regulator. Simplifying circuit design. Space saving and piping. work eliminated. Automating pressure control
Port Electro-Pneumatic Proportional Valve Series 000/000 Capable of actuating a cylinder and performing analog control of pressurization alone can be used to switch and actuate a cylinder and to perform
More informationSeries MSU. Rotary Table. High Precision. Vane Type/Sizes 1, 3, 7, 20. High precision series MSUA introduced to vane type rotary tables CAT.
CAT.ES20-90 C Rotary Table Series MSU Vane Type/Sizes 1, 3, 7, 20 Peripheral table deflection Table top deflection mm or less High Precision mm or less Series MSUB Series MSUA High precision series MSUA
More informationDischarge oil capacity cm Discharge oil capacity. Max. stroke volume on retraction Remarks.
2 High Power Systems High Power Systems 3 Working pneumatic pressure range MPa 0.2 to 0.2 to 0.7 0.2 to 0.7 0.2 to 0.7 0.2 to 0.7 Boosting ratio Theoretical output oil pressure at max. working pneumatic
More information5 Port Pilot Operated Solenoid Valve Metal Seal, Plug-in/Non Plug-in
For details about certified products conforming to international standards, visit us at www.smcworld.com. 5 Port Pilot Operated Solenoid Valve Metal Seal, Plug-in/Non Plug-in Model position 3 position
More informationGSM. Modular Design. Versions of the series. Type GSM. Gripper type P Z W R. Size. {} AS IS without O.D. clamping I.D. clamping
GSM s Modular Design Versions of the series Type GSM Gripper type P Z W R Size 32 40 50 64 30 38 45 16 20 25 32 40 16 20 25 32 40 Gripping force safety device {} AS IS without O.D. clamping I.D. clamping
More informationSeriesMHZL2 How to Order
Parallel Type ir Gripper Long Stroke SeriesMHZL2 How to Order 1 2 2 ore size Number of fingers 2 2 fingers 1mm mm 2mm 2mm MHZL2 D S C ction Double acting Single acting (normally open) Single acting (normally
More informationHow to Order M9BW. Action. Double acting Single acting. Load voltage Electrical entry direction M9NWV M9NW 12 V 5 V, M9BWV M9BW 12 V 12 V
Angular Type Air Gripper/Standard Type 2 Series ø, ø1, ø20, ø25 How to Order Angular type air gripper 2 20 Bore size mm 1 1 mm 20 20 mm 25 25 mm D S Action D Double acting Single acting M9BW Made to Order
More information3 Port Solenoid Valve Direct Operated Poppet Type
3 Port Solenoid Valve Direct Operated Poppet Type VK300 Series Rubber Seal [Option] Universal porting Available for N.C. valve, N.O. valve, divider valve, selector valve, etc. C: 0.80 dm 3 /(s bar) (Passage
More informationSeries SYA3000/5000/7000
Port Air Operated Valve Series SYA000/000/7000 How to Order A, B port size Thread type Thread piping (Inch size) - Rc Symbol Port size Applicable series Symbol Port size Applicable series F G SYA000 N
More informationLow Torque Rotary Joint
Low Torque Rotary Joint Series MQR Metal Seal Type K Long service life billion rotations MQR : billion rotations MQR : 0. billion rotations MQR : 0. billion rotations MQR8 : 0. billion rotations MQR: 0.
More informationMiniature Guide Rod Cylinder ±0.1. Mounting from 2 directions
Miniature Guide Rod Cylinder Series Non-rotating accuracy : Height ±0.1 Mounting from 2 directions idth Overall length Two auto switches can be mounted even for mm strokes Integral wiring/piping to one
More informationFlow characteristics Max. (1) b Standard Specifications. P Manual override.
Port Direct Operated Solenoid Valve Series 0 Metal Seal Model Number of positions (Single) (Double) ( position) JIS Symbol Model Port size Rc (Nominal size) 0-0 8 ( A) 0- ( 8A) 0-0 8 (0A) 0-0 8 ( A) 0-
More informationGRIPPERS SERIES P3 - P12 ACTUATORS
GRIPPERS SERIES P3 - P12 1 GRIPPER WITH TWO PARALLEL JAWS, SERIES P3 GRIPPER WITH TWO PARALLEL JAWS, SERIES P3 Parallel double-acting two-jaw gripper, with either internal or external clamping. Body made
More information3 Port Solenoid Valve Pilot Operated Poppet Type. External pilot
3 Port Solenoid Valve Pilot Operated Poppet Type Series VG342 Rubber Seal [Option] Low power consumption 4.8 W DC (Standard type) 2 W DC (Energy-saving type) No lubrication required Possible to use in
More informationEquipment for Food manufacturing processes FP series
Equipment for Food manufacturing processes FP series Various needs on food production processes have shaped our products. Equipment for Food manufacturing processes FP series CC-1271A 1 Equipment for food
More informationBody width of 10mm, Nl/min (49.08) 2W (Standard) Nl/min (78.52) 4W (U type: Large flow) Vacuum applications possible (up to 100kPa) 3 S.
High speed coil with stable response times ON: 4ms, OFF: 2ms, Dispersion accuracy: ±1ms (With light and surge voltage suppressor at a supply pressure of 0.5MPa, subject to clean, dry air) 4 Port Direct
More informationPNEUMATIC 180 ANGULAR GRIPPER
PNEUMATIC 180 ANGULAR GRIPPER Major Benefits Jaws rotate completely clear of work area eliminating an otherwise required axis of travel Three standard jaw rotations available: 60, 90, and 180 One piece
More informationWedge Cam Operation Slide Guide. Air Gripper/2-Finger Type ø12, ø16, ø20, ø25. Option: Stainless steel
Wedge Cam Operation Slide Guide Air Gripper/2-inger Type ø2, ø, ø, ø2 MH MH oad Resistant, Dust Cover for Adverse Environments 2 types of finger materials types of dust cover materials Standard: Carbon
More informationPort Rc(PT), G, NPT M5 M5 1/8" 1/8" 1/8" Stroke mm 2 ~ 6 2 ~ 8 2 ~ 10 2 ~ 13 2 ~ 16. Air Consumption cc/cycle
2GN Parallel gripper with 2 jaws Features Wedge type, 2-Jaw parallel gripper Improved stability with longer gripping point between jaw & plunger Improved function, sti ness and outer look Made with flexible
More informationRotary Actuator/Vane Style
Rotary Actuator/Vane Style Series :,,,, Basic style Series With angle adjuster Series BWU Fluid Air, CR Vane type Port location Single vane (S) ouble vane () Side ported (Nil) Axial ported (E) S Side ported
More informationParallel Style Air Gripper: Wide Type
Parallel Style Air Gripper: Wide Type Series MHL Built-in dust-protection mechanism A scraper with a dust lip is adopted for all rod rotating parts. A large amount of gripping force is provided through
More informationSEL LOCK CYLINDER. Air Cylinder with Brake system. Low cost and compact style with high reliability of intermediate stop and safety maintenance
Air Cylinder with Brake system SEL LOCK CYLINDER Low cost and compact style with high reliability of intermediate stop and safety maintenance HIROTAKA MFG. Co.,LTD. SEL LOCK CYLINDER Mechanical type for
More informationHeavy Duty Stopper Cylinder
Heavy Duty Stopper Cylinder Series ø, ø32 To stop pallets gently Stopper cylinder with built-in shock absorber Amount of energy absorption can be adjusted to suit the load. Stops the workpiece gently with
More information5 Port Pilot Operated Solenoid Valve Metal Seal, Body Ported. Flow characteristics 1 4/2 (P A/B) 4/2 5/3 (A/B R1/R2)
For details about certified products conforming to international standards, visit us at www.smcworld.com. 5 Port Pilot Operated Solenoid Valve Metal Seal, Body Ported Series VFS3000 Model position 3 position
More informationSeries CRB2. Rotary Actuator Vane Style. Size: 10, 15, 20, 30, 40 CRB2 CRBU2 CRB1 MSU CRJ CRA1 CRQ2 MSQ MRQ D- 20- Series Variations.
Rotary Actuator Vane Style Series :,,,, 4 1 Series Variations Standard Vane type Port location Rotating angle Shaft type Fluid (S) ouble vane () Side ported (Nil) Axial ported (E) 9 18 27 ouble shaft W
More informationAngular Style Air Gripper
Angular Style Air Gripper Series /A/M 15 Angular style air gripper Series /A/M - Auto switch is attachable. 8 mm x 0 mm x mm g Body option (Only for A-) Side piping Port Port A- Short body. 1 mm x 0 mm
More informationSOLENOID VALVES SERIES
VALVES GENERAL CATALOG SOLENOID VALVES SERIES INDEX Features 145 Basic Models and Configuration 145 Specifications 147 Solenoid Valve Order Codes 149 Manifold Order Codes 150 Operating Principles and Symbols
More informationHN B G1/US B G2/US B G3
HN B G/US B G/US B G Compact direct acting, port solenoid valve air, water,, low vacuum (. x 0 Pa (abs)) CONTENTS Safety precautions port solenoid valve HNB NC (normally closed) type USB NC (normally closed)
More informationHigh-Precision Digital Pressure Switch 90-ZSE40 /90-ISE40 Series
High-Precision Digital Pressure Switch ZSE40 /ISE40 Series Set pressure range 0.00 to.000 Pa For positive pressure How to Order For Positive Pressure ISE40 0 22 SDPC For Vacuum/Compound Pressure ZSE40
More informationROD SLIDERS INDEX ACTUATORS GENERAL CATALOG. Characteristics 779. Handling Instructions, and Precautions 783
Presenting our CAD drawing data catalog ACTUATORS GENERAL CATALOG ROD SLIDERS INDEX Characteristics 779 Handling Instructions, and Precautions 783 Standard Cylinders Specifications 785 Order 78 Dimensions
More informationPGN-plus. Universal Gripper Universal 2-finger parallel gripper with large gripping force and high maximum moments thanks to multi-tooth guidance.
PGN-plus Sizes 40 380 Weight 0.08 kg 39.5 kg Gripping force 123 N 21150 N Stroke per finger 2 mm 45 mm Workpiece weight 0.62 kg 80.5 kg Application example Pick-and-place unit for light to medium-weight
More informationRotary Actuator/Vane Type
Rotary Actuator/Vane Type CRB2 Series : 1, 15, 2, 3, 4 Standard Type Free Mount Type Many combinations available! Standard type/crb2 Series Piping ports are located on the flat surface. Fittings can be
More informationGRB. long life Compact Angular gripper SHIPS IN 1-2 days. Major Benefits. Industry Uses
long life Compact Angular gripper SHIPS IN 1-2 days hardened steel jaws have robust design and include dowel holes for precise tooling location steel cover, jaw design, and tight jaw slots minimize external
More information5 Port Pilot Operated Solenoid Valve Metal Seal, Body Ported
For details about certified products conforming to international standards, visit us at www.smcworld.com. 5 Port Pilot Operated Solenoid Valve Metal Seal, Body Ported Series VFS2000 Model 2 position 3
More informationGripping rotary modules.
Gripping rotary modules Gripping rotary modules GRIPPING ROTARY MODULES Series Size Page Gripping rotary modules RP 314 RP 1212 318 RP 1216 322 RP 1520 326 RP 2120 330 RP 2128 334 RC 338 RC 1212 342 RC
More informationSOLENOID VALVES SERIES
VALVES GENERAL CATALOG SOLENOID VALVES SERIES INDEX Features 133 Basic s and Configuration 133 Specifications 13 Solenoid Valve Order s 137 Manifold Order s 138 Operating Principles and Symbols 139 Dimensions
More informationRubber Seal VP300/500/700
Port Pilot Operated Poppet Rubber Seal 00/500/700 High flow capacity Cv1.0 (00), Cv. (500), Cv.0 (700) Low power consumption: 1.8W(DC) Possible to use as either selector valve or divider valve Changeable
More informationCustom stroke length (per mm) Axial foot type both sides. Max. stroke length (mm) Min. stroke length (mm) Axial foot type single.
U SM Series variation Variation Double acting Single acting extend type Single acting retract type Double acting stroke adjustable type (extended) Double acting stroke adjustable type (retracted) Double
More informationKing Of Valve Co.,Ltd.
U SM Series variation Variation Double acting Single acting extend type Single acting retract type Double acting stroke adjustable type (extended) Double acting stroke adjustable type (retracted) Double
More informationFDXS Series. required at temperatures below 0 C (32 F) None required, or ISO VG32. 0 ~ 5mm Standard with rubber bumper (both sides)
Bulletin FDXS-09 Features 1. Magnetic piston is standard in all sizes. 2. Non-rotating design enables precision positioning. ng. 3. Compact design saves space. 4. Suitable for multi-axis assemblies and
More informationLow Profile Air Gripper. Series MHF2. Low profile air gripper with space-saving design is newly released. 5-77
Low Profile Air Gripper Low profile air gripper with space-saving design is newly released. 5-77 Low Profile Air Gripper Height is approximately / the size of an equivalent Series MHZ2. MHZ2-D 42 Bore
More information3, 5 port pilot operated valve Pneumatic valve / master valve. Discrete valve. Manifold
K/K, pilot operated valve neumatic valve / master valve MNE0 MNE0 M MN W WG MNS0 MNS0 T L-/ S/0 S/ K/ F CONTENTS Safety precautions 776 Discrete valve ody ing (K/K to ) 868 Sub-plate ing (K to ) 87 Manifold
More informationTransmitters: Relay Valve
Relay Valve VR5/5 Series Appropriate output sequences are affected according to the signal received from the mechanical valve. It is equivalent to the auxiliary relay of an electrical system. Specifications
More informationPrecision Cylinder. MTS Series. ø8, ø12, ø16, ø20, ø25, ø32, ø40 MXH MXS MXQ MXQ MXF MXW MXJ MXP MXY MTS D- -X. Series Variations MTS8
Precision Cylinder Series, ø, ø6, ø, ø, ø, ø MXS Series Variations Model 8 Standard stroke (mm) 7 7 Rod end configuration Cushion Rubber bumper End lock Made to Order Rod Variable stroke/ through-hole
More informationAir Cylinder: Standard Type Double Acting, Double Rod. ø20, ø25, ø32, ø40, ø50, ø63, ø80, ø100. How to Order. Bore size
Air Cylinder: tandard eries CG1W,,,,,,, 0 How to Order auto switch auto switch CG1W L N 0 With auto switch CDG1W L N 0 HW N A uilt-in magnet Double acting, double rod type L U Mounting style asic style
More information5 Port Pilot Solenoid Valve/Body Ported Type Base Ported Type. Closed Center DS3330/DS3300. How to Order - Body Ported Type
5 Port Pilot Solenoid Valve/Body Ported Type Base Ported Type COMPACT SIZE AND LIGHT WEIGHT LARGE FLOW CAPACITY LOW POWER CONSUMPTION DESIGNED FOR NON-LUBRICATED SERVICE DV000 Symbol Single DS330/ How
More informationMCHG2 series MCHG2 16 M. PARALLEL GRIPPER (3-Finger) Features. Order example. Specification. Installation. Model. Model MM UU UA Bolt
MCHG2 series PARALLEL GRIPPER (3-inger) eatures Through holes in body enable simple mounting. Body manufactured from high tensile, anodised aluminum giving good resistance to corrosion. Available with
More informationSRM3. High precision guided rodless cylinder. ø25 ø32 ø40 ø63. Rodless type
Overview This is a high precision guided rodless cylinder with two axis high precision linear guide integrated to rodless cylinders to. Ideal for high precision transfer of parts. Features Thin design
More informationMULTISTAGE MICRO EJECTORS
MULTISTAGE MICRO EJECTORS MED07-E, MED10-E Specifications Basic model Item Media Operating pressure range MPa [psi.] Proof pressure MPa [psi.] Operating temperature range (atmosphere and media) C [ F]
More informationSeries ADR. Double Rod Cylinder W1H ADR M Bore Size : ф10, ф16, ф20, ф25. How to Order A ACP UACP AM2 AM AL ALX ARD AQ2 AGX GX ADM ADR
Double Rod Cylinder Bore Size : ф10, ф16, ф, ф25 HIGH ATERA OAD CAPABIITY ADJUSTABE STROKE IS AVAIABE A THIN AND COMPACT DOUBE ROD CYINDER BA BUSHING OPTION AUTO SWITCH READY NON-UBE SERVICE STAND. A 2
More informationRotary Actuator. New. New RoHS. Vane Type 10, 15, 20, 30, 40. Many combinations available! Series CRB2. Two shaft options available
Rotary Actuator Vane Type,,,, Many combinations available! New RoHS Two shaft options available With auto switch unit New Port locations modified Change in angle: Parallel piping ( ), Conventional type
More informationProportional flow control valve 2-way version, Type 2FRE 10, Huade América 1
Proportional flow control valve 2-way version, Type 2FRE 10, 16... Huade América 1 EIJING HUADE HYDRAULIC INDUSTRIAL GROUP CO.,LTD. Proportional flow control valve 2-way version Type 2FRE 10 16... Size
More informationGSM. Modular Design. Versions of the series. Type GSM. Gripper type P Z W R. Size. {} AS IS without O.D. clamping I.D. clamping
GSM Pneumatic Gripper-Swivel System Modular Design Versions of the series Type GSM Gripper type P Z W R Size 32 40 50 64 30 38 45 16 20 25 32 40 16 20 25 32 40 Gripping force safety device {} AS IS without
More informationSpecifications MHC2-10D MHC2-16D MHC2-20D MHC2-25D MHC2-10S. Double acting MHC2-16S. Single acting MHC2-20S MHC2-25S. Angular style air gripper
Angular Style Air Gripper Standard Type Series MHC2 Size: 10, 16, 20, 25 A large amount of gripping force is provided through the use of a double piston mechanism, while maintaining a compact design. Built-in
More informationLow Torque Rotary Joint
Low Torque Rotary Joint MQR Series Metal Seal Type Long service life billion rotations MQR : billion rotations MQR : 0. billion rotations MQR : 0. billion rotations MQR8 : 0. billion rotations MQR: 0.
More informationSensor specifications Model no.
Miniature size Analog output type/switch output type FSM-V Series (air/nitrogen gas) Flow rate range:.5,.1,.5, 1, 5, /min. Pressure Sensor specifications Model no. Flow rate range ( /min) Note -.5 to +.5
More informationPZN-plus Application example Pneumatic 3-Finger Centric Gripper Universal Gripper Stroke per finger 2 mm 35 mm
PZN-plus Sizes 40 300 Weight 0.13 kg 46 kg Gripping force 255 N 35500 N Stroke per finger 2 mm 35 mm Workpiece weight 1.3 kg 127.5 kg Application example Insertion tool for assembling small to mediumsized
More information5 Port Air Operated Valve
Port ir Operated Valve Series VF000/000/000 RoHS 22- Series VF000/000/000 Model Selection by Operating Conditions q ir Operated Valve: Single Unit Series Sonic conductance C[dm /(s bar)] Type of actuation
More informationManual override. Non-locking push type (Tool required) Nil: B: Locking type (Tool required) C: Locking type (Manual) Electrical entry
Plug-in nit Series 0 1 2 3 4 Series Type of actuation Metal Rubber 2 position single 3 position closed 3 position pressure Manifold Option How to Order Valves VQ 1 1 1 0 Y 5 LO Body type 1 0 1 Seal Metal
More information