Large bore size cylinder SCS2 Series

Transcription

1 Large bore size cylinder C2 eries ew product LGE BOE IZE CYLIDE C2 EIE Large Mass eduction! 50% mass reduction by using aluminum for covers and tubes CC

2 oh compliant Large Mass 50% mass reduction by using aluminum for covers and tubes Comparing with the conventional products educed by up to 50% C C2 mall switch is equipped -type switch, smaller than the conventional type, has been incorporated. his eliminates the protruding switch and saves space when installing. Magnet provided as standard (C2-L/LH) Incorporating a ø250 switch additionally. witches can be additionally mounted on all products (L/LH). ort and needle installation on the same plane he air supply/exhaust ports and the cushion needle have been installed on the same plane. Cylinder attachment and adjustment have become easier. Compatibility of attachment dimensions (LH excluded) he attachment dimensions are compatible with the previous product (C), so that maintenance works are eased. * he location of the piping port has been changed. Conventional switch type switch dopting aluminum color liver (aluminum color, no coating) has been adopted for the product surface color to match various devices. C2 series variation (mm) eries variation Bore size tandard stroke length ø125 ø140 ø160 ø180 ø200 ø to 300 C2 Double acting/ lubrication type C2 ew large-bore cylinder eries Double acting/ non-lubrication type Double acting/ stroke adjustable type Double acting/ heat resistant type Double acting/ double rod type Double acting/ back to back type Double acting/ two stage type Double acting/ low hydraulic type Double acting/ rubber scraper type C2- C2- C2- C2-D C2-B C2-W C2-H C2-G

3 eries variation Large bore size cylinder C2 eries C2 eries eries variation : tandard : emi-standard : Custom order : ot producible Mounting style Mounting style Cushion Option ccessory Intro1 Variation Double acting/ lubrication type Double acting/ non-lubrication type/with switch Model no. JI symbol C2 C2- C2- Double acting/ stroke adjustable type (Extended) Double acting/ heat resistant type Double acting/ double rod type/ with switch Double acting/ back to back type Double acting/ two stage type Double acting/ low hydraulic type Double acting/ rubber scraper type C2- C2-D C2-B C2-W (Indication symbol) C2-H C2-G Bore size (mm) ø125 ø140 ø160 tandard stroke length (mm) Min. stroke length (mm) Max. stroke length (mm) vailable stroke length (mm) Custom stroke length (mm) Basic type xial foot type od end flange type Head end flange type Eye bracket type Clevis bracket type Center trunnion type od end trunnion type Head end trunnion type Intermediate supporting hole od end supporting hole Head end supporting hole o cushion Both sides cushion od end cushion Head end cushion With check valve for cushion Bellows (60 C) Bellows (100 C) Bellows (250 C) iston rod material change (tainless steel) Cushion needle position Cushion needle position Copper and FE free od eye od clevis Eye bracket Clevis bracket witch age LB F FB C CB C B F D E B H C2 J L M 6 I Y B1 B2 800 ø ø ø ø125 ø140 ø ø ø ø ø125 ø140 ø ø ø ø ø125 ø140 ø ø ø ø ø125 ø140 ø ø ø ø ø125 ø140 ø ø ø ø ø125 ø140 ø ø ø ø ø125 ø140 ø ø ø ø ø125 ø140 ø ø ø ø C2-L C2-L C2-LG C2-LH C2-LW C2-LB C2-LD Intro2

4 C2 eries Variation ans option selection table : tandard : Option : roducible (custom order product) : vailable depending on conditions. (Consult with CD.) : ot available Category Variation ort thread Option Category Double acting/lubrication type Double acting/non-lubrication type Double acting/with switch Double acting/double rod type Back to back type wo stage type troke adjustable extended type Low hydraulic type Heat resistant type (120 C) ubber scraper type G Variation With check valve for cushion ylon tarpaulin with bellows eoprene with bellows ilicon rubber with bellows iston rod material tainless steel Cushion needle position designation Copper and FE free type iston rod tip designation ort thread none L D B W H G G C2 J L M,, 6 * Double acting/lubrication type Blank Double acting/non-lubrication type ote 1 Double acting/with switch L Double acting/double rod type D Back to back type B wo stage type W 1 troke adjustable extended type Low hydraulic type H Heat resistant type (120 C) 2 ubber scraper type G G G Option With check valve for cushion C2 ylon tarpaulin with bellows J eoprene with bellows ilicon rubber with bellows L iston rod material tainless steel M Cushion needle position designation... Copper and FE free type 6 iston rod tip designation * ccessory Cylinder switch eparate notice od eye I od clevis Y Eye bracket B1 Clevis bracket B2 ote 1: Heat-resistant type does not allow lubrication (non-lubrication only). 1: Can be handled only for the 2 side. 2: Can be handled for 100 or less operating temperature. Intro3

5 <Example of model number> C2 eries Variation ans option selection table C2 L LB 125 B 100 0H D J I Model no. Variation * Indication from left to right on the left table. Mounting style B Bore size C ort thread type D Cushion E troke length F witch model no. G witch quantity I H Option ccessory Model number: Large bore size cylinder Variation : With switch/stroke adjustable type Mounting style : xial foot type Bore size : ø125 mm ort thread type : c thread Cushion : Both sides cushion troke length : 100 mm witch model no. : eed 0H switch, lead wire 1 m witch quantity : wo Option : Bellows material/for maximum ambient temperature 60 C ccessory : od clevis ote 1: Back to back type has two cylinders. When specifying individual variations, follow the procedure below: When variations are applied only for 1, indicate the variation symbol before the 1 stroke. (Example) C2 B 125 H50 75: Only 1 is of the low hydraulic type. When variations are applied only for 2, indicate the variation symbol before the 2 stroke. (Example) C2 B H75: Only 2 is of the low hydraulic type. When the same variations are applied for both 1 and 2, insert the variation symbol before the port size. (Example) C2 BH : Both 1 and 2 are of the low hydraulic type. Intro4

6 Large bore size cylinder Double acting/single rod/lubrication type/non-lubrication type C2 eries Bore size: ø125, ø140, ø160, ø180, ø200, ø250 JI symbol pecifications Descriptions C2/C2-/C2-L Bore size mm ø125 ø140 ø160 ø180 ø200 ø250 ctuation Double acting Working fluid Compressed air Max. working pressure Ma 1.0 Min. working pressure Ma 0.05 roof pressure Ma 1.6 mbient temperature C -5 to 60 (no freezing) ort size c 1/2 c 3/4 c1 troke tolerance mm (to 300), (to 1000), (to 1200) Working piston speed mm/s 20 to 1000 (Use within the allowable energy absorption range.) Cushion ir cushion Effective air cushion length mm Lubrication equired (when lubricating, use turbine oil Class 1 IO VG32.); for C-/L, not required With cushion llowable energy absorption J o cushion he type without cushioning cannot absorb a large energy generated by an external load. We recommend to install an external shock absorber. troke length Bore size (mm) tandard stroke length (mm) Max. stroke length (mm) vailable stroke length (mm) Min. stroke length (mm) runnion type min. stroke length (mm) ø ø ø ø ø200 1, ø250 1, ote 1: Custom stroke length is available per 1 mm increment. ote 2: If the max. stroke is exceeded, product specifications may not be met, depending on operating conditions. Contact CD for details. Center-holding head For the stroke shown in the table below, a center-holding head is added to the middle of the cylinder. Center-holding head addition stroke Bore size (mm) troke length ø to 2000 ø140 Bore size (mm) M CE ø ø M CE 1

7 Min. stroke length with switch Descriptions Bore size(mm) witch type Diagram troke length with same surface installation troke length of intermediate supporting hole troke length of rod end supporting hole C2 eries pecifications troke length of head end supporting hole ort ort ort ort eed switch (*) Bore he position cannot be detected at the rod side stroke end. ø and over 70 and over ø and over 75 and over ø and over 80 and over 20 and over ø and over 85 and over ø and over 90 and over ø and over 100 and over he position cannot be detected at the head side stroke end. witch specifications 1-color/2-color indicator type, strong magnetic field proof roximity 2 wire roximity 2 wire roximity 3 wire eed 2 wire roximity 2 wire Descriptions 2H/2V/ 2YH/ 2WH/ 3H/3V 3YH/ 3WH/ 2YD/ 1H/1V 3H/3V 0H/0V 5H/5V 8H/8V 2JH/2JV 2YV 2WV (custom order) 3YV 3WV 2YD pplications rogrammable controller relay, small solenoid valve rogrammable controller rogrammable controller, relay rogrammable controller, rogrammable relay IC circuit (without controller, relay indicator light), serial connection rogrammable controller, relay rogrammable controller Output method - output output output output - ower voltage - 10 to 28 VDC - Load voltage 85 to 265 VC 10 to 30 VDC 24 VDC ±10% 30 VDC or less 12/24 VDC 100/110 VC 5/12/24 VDC 100/110 VC 12/24 VDC 110 VC 220 VC 24 VDC ±10% Load current 5 to 100 m 5 to 20 m (ote 1) 100 m or less 50 m or less 5 to 50 m 7 to 20 m 50 m or less 20 m or less 5 to 50 m 7 to 20 m 7 to 10 m 5 to 20 m Indicator light Leakage current Weight g For 100 VC, 1 m or less; for 200 VC, 2 m or less 1 m: 33 3 m: 87 5 m: m: 18 3 m: 49 5 m: 80 ed/green ed/green Yellow ed/green ed/green Without indicator light ed/green 1 m or less 10 μ or less 0 m 1 m or less 1 m: 33 3 m: 87 5 m: m: 18 3 m: 49 5 m: 80 1 m: 18 3 m: 49 5 m: 80 1 m: 33 3 m: 87 5 m: m: 18 3 m: 49 5 m: 80 1 m: 18 3 m: 49 5 m: 80 1 m: 33 3 m: 87 5 m: m: 61 3 m: m: 272 ote 1: bove-mentioned load current's maximum value 20 m is for 25 C. he current will be lower than 20 m if ambient temperature around the switch is higher than 25 C. (5 to 10 m when 60 C.) ote 2: strong magnetic field proof switch (2YD) cannot be used in environments with direct current magnetic fields. Cylinder mass Descriptions/Mounting style Weight when stroke length () = 0 mm witch weight dditional Bore size (mm) Basic type xial foot type Flange type Eye bracket type Clevis bracket type runnion type Mounting weight per witch (00) (LB) (F/FB) (C) (CB) (/B/C) bracket = 100 mm ø ø ee the mass ø presented in ø the witch ø pecifications ø (Example) Weight of C2-L-LB-125B-300-0H-D (Unit: kg) Weight when = 0 mm kg dditional weight when = 300 mm = 4.62 kg Weight of two switches (0H-D) = kg Weight of two switch brackets = kg Weight = kg 2

8 3 C2 eries How to order o lubrication type without switch C2 C2- C2-L ort Model no. LB LB LB Mounting style ote o non-lubrication type without switch on-lubrication type with switch B Bore size B B C ort thread type ote 1 : For hole type trunnions, ø125 to 160 only will be available through custom order. For information such as external dimensions, consult as necessary. ote 2 : efer to page 2 for min. stroke length with switch. ote 3 : When selecting or B for mounting, the number of switches is limited to "H" (one on head side) for, and "" (one on rod side) for B. ote 4 : he instantaneous max. temperature is that at which sparks, swarf, etc., temporarily contact bellows. ote 5 : For the cushion needle position indication, check the following. ote 6 : "I" a n d "Y" cannot be selected at the same time. <Example of model number> C2-L-LB-125B-50-0H--JY 50 J Y 50 J Y B 50 0H J Y D Cushion E troke length Model: Large bore size cylinder, double acting/lubrication type/ non-lubrication type Model number : on-lubrication type with switch Mounting style : xial foot type Bore size : ø125 mm ort thread type : c thread Cushion : Both sides cushion troke length : 50 mm witch model : eed 0H, lead wire 1 m witch quantity : One on rod end Option : Bellows (maximum ambient temperature 60 C) ccessory : od clevis Cushion needle position (eedle position with the port faced upward, from the rod direction) ote on model no. selection tandard If the option,, or is selected for the Class-2 pressure vessel test, the port position will be centered, and the needle positions will be offset as shown in the right illustration. troke for Class-2 pressure vessel test Bore size troke length ø and over ø and over ø and over ø and over ort F witch model no. Options,, and for Class-2 pressure vessel test G witch quantity ote 3 H Option ote 4 I ote 5 ccessory ote 6 Descriptions Mounting style 00 Basic type LB xial foot type F od end flange type FB Head end flange type C Eye bracket type CB Clevis bracket type (with a pin and a snap ring) C Center trunnion type od end trunnion type B Head end trunnion type F Intermediate supporting hole (Custom order) D od end supporting hole (Custom order) E Head end supporting hole (Custom order) B Bore size (mm) 125 ø ø ø ø ø ø250 C ort thread type Blank c thread thread (Custom order) G G thread (Custom order) D Cushion B Both sides cushion od end cushion H Head end cushion o cushion E troke length (mm) Bore size troke length ote 2 vailable stroke length Custom stroke length ø125 to ø160 1 to ø180 1 to By 1 mm ø200 1 to ø250 1 to increment F witch model no. ectilinear L type Voltage Lead Indicator wire wire C DC wire 0H* 0V* 1 color indicator type 5H* 5V* Without indicator light 2 wire 8H* 8V* 1 color indicator type 1H* 1V* 1 color 2 wire 2H* 2V* indicator type 3H* 3V* 3 wire 3H* 3V* 1 color indicator type ( output) (custom order) 2YH* 2YV* 2 color 2WH* 2WV* 2 wire 3WH* 3WV* indicator type 3YH* 3YV* 3 wire 2 wire 2YD* - (Exclusively for C magnetic fields) 2YD* - For strong magnetic fields 2JH* 2JV* Off delay type 2 wire * Lead wire length Blank 1 m (standard) 3 3 m (option) 5 5 m (option) G witch quantity One on rod end H One on head end D wo hree 4 Four H Option C2 With a check valve on the cushion part Contact eed roximity Maximum ambient temperature Instantaneous maximum temperature J Bellows 60 C 100 C Bellows 100 C 200 C L Bellows 250 C 400 C M iston rod material (tainless steel) Blank Cushion needle position standard tandard Cushion needle position Cushion needle position Cushion needle position 6 Copper and FE free (custom order) I ccessory I od eye Y od clevis (with a pin and a snap ring) B1 Eye bracket B2 Clevis bracket (with a pin and a snap ring)

9 How to order switch witch body + mounting bracket set C2-L 0H 125 C2 eries How to order/theoretical thrust table/internal structure diagram Only switch body W 0H Mounting bracket set C2-L 125 witch model no. (revious page, item F ) Bore size (mm) ø125 ø140 ø160 ø180 ø200 ø250 Bore size (revious page, item B ) witch model no. (revious page, item F ) Mounting bracket type switch 2YD type switch Bore size (revious page, item B ) heoretical thrust table (Unit: ) Operating Working pressure Ma direction ush ull ush ull ush ull ush ull ush ull ush ull Internal structure and parts list tandard type C2-(L)() For ø200, ø For C2- For C2-L ote: are only for cushion type. o. art name Material emarks o. art name Material emarks 1 Hexagon nut teel Zinc chromate 13 Cylinder gasket itrile rubber 2 Bush Icon-copper oil-impregnated bearing metal 14 Cushion packing itrile rubber/steel 3 od cover luminum alloy cast metal Chromate 15 Cylinder tube luminum alloy Hard alumite 4 ie rod teel Zinc chromate 16 iston packing itrile rubber 5 iston rod teel Industrial chrome plating 17 Wear ring olyacetal resin 6 Cushion ring teel Zinc chromate 18 Cushion ring B teel Zinc chromate 7 iston gasket itrile rubber Copper alloy (ø125 to ø180) 19 Cushion needle 8 iston luminum alloy cast metal Copper (ø200, 250) Zinc chromate 9 Head cover luminum alloy cast metal Chromate 20 Hexagon nut teel Zinc chromate 10 Hexagon nut teel Zinc chromate 21 eedle gasket itrile rubber 11 Dust wiper itrile rubber ø200, 250 only 22 Magnet ubber C2-L only 12 od packing itrile rubber epair parts list Material of the mounting bracket Bore size (mm) C2 (Lubrication type) C2-(L) (on-lubrication type) Mounting style Material emarks epair parts no. it no. it no. LB teel Coating ø125 C2-125 C F, FB teel Coating ø140 C2-140 C C, CB Cast iron Coating ø160 C2-160 C2--160, B, C Cast iron Coating ø180 C2-180 C ø200 C2-200 C ø250 C2-250 C ote 1: he piston packing of non-lubrication type is different from the one of lubrication type. 4

10 C2 eries Dimensions C2 basic type (00) M MO (Width across flats) X + l + troke length WF + l b 8-D C WF V Q D1 U X + troke length LL + troke length G View EE GB (M) HD1 QB 1 L ød ømm øj (With bellows) Width across flats (B) 2-color indicator, strong magnetic field, with switch. D2 HD2 2 od side Head side ort position diagram (view ) D: od side max. sensitive mounting position HD: Head side max. sensitive mounting position ote 1: indicate the positions of cushion needles. ote 2: For the l dimensions, the decimal places have been rounded out. ote 3: efer to dimensions on page 14 for the accessories. Basic type (00) Basic dimensions Bore size (mm) B C D EE G GB J L LL M MM M MO Q QB ø M c1/ M to ø M c3/ M to ø M c3/ M to ø M c3/ M to ø M c3/ M to ø M c M to With bellows With switch 0, 5, 2, 3 2W, 3W 2Y, 3Y, 2YD, 1, 2J 8 Bore size (mm) U V WF X b d l 1 2 D1 HD1 D1 HD1 D2 HD2 D2 HD2 ø (troke/4.55) ø (troke/4.55) ø (troke/5.15) ø (troke/5.15) ø (troke/5.30) ø (troke/6.40)

11 Dimensions C2 eries Double acting/single rod/lubrication type/non-lubrication type xial foot type (LB) C + troke length 8-D C ømm WF V U G Q LL + troke length View GB QB 2-EE H H L øj Width across 4-øB flats (B) O B U + troke length U O b WF + l ød od side Head side B + l (With bellows) ort position diagram (view ) ote 1: efer to dimensions of switch on page 5 for with switch. ote 2: indicate the positions of cushion needles. ote 3: For the l dimensions, the decimal places have been rounded out. ote 4: efer to dimensions on page 14 for the accessories. xial foot type (LB) basic dimensions Bore size (mm) B H O U B C D EE G GB J L LL MM ø M c1/ M to ø M c3/ M to ø M c3/ M to ø M c3/ M to ø M c3/ M to ø M c M to With bellows Bore size (mm) M MO Q QB B C U V WF X b d l ø (troke length/4.55) + 11 ø (troke length/4.55) + 9 ø (troke length/5.15) + 9 ø (troke length/5.15) + 9 ø (troke length/5.30) + 9 ø (troke length/6.40) + 9 6

12 C2 eries Dimensions od end flange type (F) (X + troke length) WF LL + troke length (M) C V G View GB 8-D ømm U Q 2-EE QB øy E øj L Width across F flats (B) MF UF 4-øFB W (XB + troke length) WF + l b ød od side Head side W + l (With bellows) ort position diagram (view ) ote 1: efer to dimensions of switch on page 5 for with switch. ote 2: indicate the positions of cushion needles. ote 3: For the l dimensions, the decimal places have been rounded out. ote 4: efer to dimensions on page 14 for the accessories. od end flange type (F) basic dimensions Bore size (mm) B C D E EE FB G GB J L LL M MF MM ø M c1/ M to ø M c3/ M to ø M c3/ M to ø M c3/ M to ø M c3/ M to ø M c M to With bellows Bore size (mm) Q QB F UF U V W WF X XB Y b d l ø (troke length/4.55) + 11 ø (troke length/4.55) + 9 ø (troke length/5.15) + 9 ø (troke length/5.15) + 9 ø (troke length/5.30) + 9 ø (troke length/6.40) + 9 7

13 Dimensions C2 eries Double acting/single rod/lubrication type/non-lubrication type Head end flange type (FB) ZC + troke length C ømm WF V U G Q 2-EE LL + troke length View GB QB MF 8-D øy E L øj Width across flats (B) Z + troke length F UF 4-øFB b WF + l ød od side Head side Z + l + troke length (With bellows) ort position diagram (view ) ote 1: efer to dimensions of switch on page 5 for with switch. ote 2: indicate the positions of cushion needles. Head end flange type (FB) basic dimensions ote 3: For the l dimensions, the decimal places have been rounded out. ote 4: efer to dimensions on page 14 for the accessories. Bore size (mm) B C D E EE FB G GB J L LL MF MM ø M c1/ M to ø M c3/ M to ø M c3/ M to ø M c3/ M to ø M c3/ M to ø M c M to With bellows Bore size (mm) Q QB F U UF V WF Y ZC Z b d l ø (troke length/4.55) + 11 ø (troke length/4.55) + 9 ø (troke length/5.15) + 9 ø (troke length/5.15) + 9 ø (troke length/5.30) + 9 ø (troke length/6.40) + 9 8

14 C2 eries Dimensions Eye bracket type (C) XC + troke length C ømm WF V U G Q LL + troke length CF View GB QB 2-EE 8-D CC øj L M Width across øcdh10 flats (B) XD + troke length -0.1 EW -0.4 XC + l + troke length b WF + l ød od side Head side XD + l + troke length (With bellows) ort position diagram (view ) ote 1: efer to dimensions of switch on page 5 for with switch. ote 2: indicate the positions of cushion needles. ote 3: For the l dimensions, the decimal places have been rounded out. ote 4: efer to dimensions on page 14 for the accessories. Eye bracket type (C) basic dimensions Bore size (mm) B C D CC CD CF EE EW G GB J L LL MM ø M c1/ M to ø M c3/ M to ø M c3/ M to ø M c3/ M to ø M c3/ M to ø M c M to With bellows Bore size (mm) M Q QB U V WF XC XD b d l ø (troke length/4.55) + 11 ø (troke length/4.55) + 9 ø (troke length/5.15) + 9 ø (troke length/5.15) + 9 ø (troke length/5.30) + 9 ø (troke length/6.40) + 9 9

15 Dimensions C2 eries Double acting/single rod/lubrication type/non-lubrication type Clevis bracket type (CB) XC + troke length C WF V U G Q LL + troke length CF GB View 2-EE QB 8-D CC L øj M Width across flats (B) ømm XD + troke length øcdh CB +0.1 UB XC + l + troke length WF + l b ød od side Head side XD + l + troke length (With bellows) ort position diagram (view ) ote 1: efer to dimensions of switch on page 5 for with switch. ote 4: efer to dimensions on page 14 for the accessories. ote 2: indicate the positions of cushion needles. ote 5: pin and a snap ring are attached. ote 3: For the l dimensions, the decimal places have been rounded out. Clevis bracket type (CB) basic dimensions Bore size (mm) B C D CB CC CD CF EE G GB J L LL ø M c1/ M to ø M c3/ M to ø M c3/ M to ø M c3/ M to ø M c3/ M to ø M c M to With bellows Bore size (mm) MM M Q QB U UB V WF XC XD b d l ø (troke length/4.55) + 11 ø (troke length/4.55) + 9 ø (troke length/5.15) + 9 ø (troke length/5.15) + 9 ø (troke length/5.30) + 9 ø (troke length/6.40)

16 C2 eries Dimensions Center trunnion type (C) 8-D C WF V U (X + troke length) LL + troke length G View Q 2-EE GB QB (M) øde8 øj L ømm C M UM Width across flats (B) XV + Q troke length 2 CE XL + troke length 2 X + l + troke length WF + l b ød od side Head side XV + l + troke length 2 (With bellows) ort position diagram (view ) ote 1: efer to dimensions of switch on page 5 for with switch. ote 2: indicate the positions of cushion needles. ote 3: For the l dimensions, the decimal places have been rounded out. Center trunnion type (C) basic dimensions ote 4: efer to dimensions on page 14 for the accessories. ote 5: efer to min. stroke length on page 1. Bore size (mm) Q B C CE D EE G GB J L LL M MM ø t/ M c1/ M to ø t/ M c3/ M to ø t/ M c3/ M to ø t/ M c3/ M to ø t/ M c3/ M to ø t/ M c M to With bellows Bore size (mm) Q QB C D M U UM V WF X XV XL b d l ø (troke length/4.55) + 11 ø (troke length/4.55) + 9 ø (troke length/5.15) + 9 ø (troke length/5.15) + 9 ø (troke length/5.30) + 9 ø (troke length/6.40)

17 Dimensions od end trunnion type () C2 eries Double acting/single rod/lubrication type/non-lubrication type 8-D C WF V U G Q (X + troke length) LL + troke length View 2-EE GB QB (M) øde8 L øj ømm C M UM Width across flats (B) XG CE (XH + troke length) b WF + l ød od side Head side XG + l (With bellows) ort position diagram (view ) ote 1: efer to dimensions of switch on page 5 for with switch. ote 2: indicate the positions of cushion needles. ote 3: For the l dimensions, the decimal places have been rounded out. od end trunnion type () basic dimensions ote 4: efer to dimensions on page 14 for the accessories. ote 5: efer to min. stroke length on page 1. ote 6: he position cannot be detected at the stroke end of rod side. Bore size (mm) B C CE D EE G GB J L LL M MM ø M c1/ M to ø M c3/ M to ø M c3/ M to ø M c3/ M to ø M c3/ M to ø M c M to With bellows Bore size (mm) Q QB C D M U UM V WF X XG XH b d l ø (troke length/4.55) + 11 ø (troke length/4.55) + 9 ø (troke length/5.15) + 9 ø (troke length/5.15) + 9 ø (troke length/5.30) + 9 ø (troke length/6.40)

18 C2 eries Dimensions Head end trunnion type (B) (X + troke length) C WF V U G Q LL + troke length (M) View GB 2-EE QB 8-D L øde8 øj ømm Width across flats (B) XJ + troke length CE (X) C M UM b WF + l ød od side Head side B + l + troke length (With bellows) ort position diagram (view ) ote 1: efer to dimensions of switch on page 5 for with switch. ote 2: indicate the positions of cushion needles. ote 3: For the l dimensions, the decimal places have been rounded out. Head end trunnion type (B) basic dimensions ote 4: efer to dimensions on page 14 for the accessories. ote 5: efer to min. stroke length on page 1. ote 6: he position cannot be detected at the stroke end of head side. Bore size (mm) B C CE D EE G GB J L LL M MM ø M c1/ M to ø M c3/ M to ø M c3/ M to ø M c3/ M to ø M c3/ M to ø M c M to With bellows Bore size (mm) Q QB C D M U UM V WF X XJ X b d l ø (troke length/4.55) + 11 ø (troke length/4.55) + 9 ø (troke length/5.15) + 9 ø (troke length/5.15) + 9 ø (troke length/5.30) + 9 ø (troke length/6.40)

19 C2 eries common accessory dimensions od eye for C2 (I) CDH10 Material: teel -0.1 CB -0.4 od clevis for C2 (Y) CDH10 C2 eries Common accessory dimensions Material: Cast iron UB +0.4 CB M C MB C B MC ød (D) (E) Model no. C CB CD D M MC Weight (kg) Model no. B C CB CD D E MB UB Weight (kg) C2-125-I M C2-125-Y M C2-140-I M C2-140-Y M C2-160-I M C2-160-Y M C2-180-I M C2-180-Y M C2-200-I M C2-200-Y M C2-250-I M C2-250-Y M ote: pin and a snap ring are attached. Eye bracket for C2 (B1) Material: Cast iron in () Material: teel E F 4-D G EW CC 4-C M C B C ød øcde8 CDH10 Model no. C CC CD D E EW F G M Weight (kg) C2-125-B C2-140-B C2-160-B C2-180-B C2-200-B C2-250-B Clevis bracket for C2 (B2) E F G CC 4-D 4-C UB +0.4 CB +0.1 Material: Cast iron Model no. B C CD D nap ring Weight (kg) pplicable model C C type 25 for axes 0.25 C-125 C C type 28 for axes 0.40 C-140 C C type 32 for axes 0.50 C-160 C C type 40 for axes 1.15 C C C type 50 for axes 2.25 C-250 ote: For the clevis type, clevis bracket, and rod clevis, pins and snap rings have been attached. M CDH10 Model no. C CB CC CD D E F G M UB Weight (kg) C2-125-B C2-140-B C2-160-B C2-180-B C2-200-B C2-250-B ote: pin and a snap ring are attached. 14

20 Large bore size cylinder Double acting/stroke adjustable type C2- eries Bore size: ø125, ø140, ø160, ø180, ø200, ø250 JI symbol pecifications Descriptions C2- (troke adjustable type) Bore size mm ø125 ø140 ø160 ø180 ø200 ø250 ctuation Double acting Working fluid Compressed air Max. working pressure Ma 1.0 Min. working pressure Ma 0.1 roof pressure Ma 1.6 mbient temperature C -5 to 60 (no freezing) ort size c 1/2 c 3/4 c1 troke tolerance mm (to 300), (to 1000), (to 1200) Working piston speed mm/s 20 to 1000 (Use within the allowable energy absorption range.) Cushion ir cushion (ote that the rod side cushion does not function during stroke adjustment.) Effective air cushion length mm djustable stroke range mm 25, 50, 75, 100 Lubrication equired (when lubricating, use turbine oil Class 1 IO VG32.) With cushion llowable energy absorption J o cushion he type without cushioning cannot absorb a large energy generated by an external load. We recommend to install an external shock absorber. * Custom order troke length Bore size (mm) tandard stroke length (mm) Max. stroke length (mm) Min. stroke length (mm) runnion type min. stroke length (mm) ø ø ø ø ø200 1, ote 1: Custom stroke length is available ø250 1, per 1 mm increment. ote 2: If the max. stroke is exceeded, product specifications may not be met, depending on operating conditions. Contact CD for details. Cylinder mass (Unit: kg) Descriptions/Mounting style Weight when stroke length () = 0 mm, adjustable stroke () = 25 mm dditional weight Bore size (mm) Basic type (00) xial foot type (LB) Flange type (F/FB) Eye bracket type (C) Clevis bracket type (CB) runnion type (/B/C) Weight per 25 mm adjustable stroke () per = 100 mm ø ø ø ø ø ø (Example) Weight of C2--LB-125B Weight when = 0 mm kg dditional weight when = 300 mm = 4.62 kg Weight when the adjustable stroke is 25 mm kg Weight = kg heoretical thrust table (Unit: ) Bore size Operating Working pressure Ma (mm) direction ø125 ush/ull ø140 ush/ull ø160 ush/ull ø180 ush/ull ø200 ush/ull ø250 ush/ull

21 How to order C2- eries How to order Without switch C2- LB 125 B J Y Mounting style ote 1 B Bore size ote on model no. selection ote 1: For hole type trunnions, ø125 to 160 only will be available through custom order. For information such as external dimensions, consult as necessary. ote 2: he instantaneous max. temperature is that at which sparks, swarf, etc., temporarily contact bellows. ote 3: For the cushion needle position indication, check the drawing below. ote 4: "I" and "Y" cannot be selected at the same time. <Example of model number> C2--LB-125B JY C ort thread type D Cushion E troke length Model: Large bore size cylinder stroke adjustable type Mounting style : xial foot type Bore size : ø125 mm ort thread type : c thread Cushion : Both sides air cushion troke length : 50 mm djustable stroke range : 25 mm Option : Bellow material/for max. ambient temperature 60 C ccessory : od clevis Cushion needle position (eedle position with the port faced upward, from the rod direction) tandard ort If the option,, or is selected for the Class-2 pressure vessel test, the port position will be centered, and the needle positions will be offset as shown in the right illustration. ort F djustable stroke range G Option ote 2 H ccessory ote 4 ote 3 Descriptions Mounting style 00 Basic type LB xial foot type F od end flange type FB Head end flange type C Center trunnion type od end trunnion type B Head end trunnion type F Intermediate supporting hole (Custom order) D od end supporting hole (Custom order) E Head end supporting hole (Custom order) Bore size (mm) 125 ø ø ø ø ø ø250 B C ort thread type Blank c thread thread (Custom order) G G thread (Custom order) D E Cushion B Both sides cushion od end cushion H Head end cushion o cushion troke length (mm) Bore size troke length Custom stroke length ø125 to ø to 800 ø to 900 By 1 mm ø to 1000 increment ø to 1200 F djustable stroke range (mm) Option C2 With a check valve on the cushion part G Max. ambient temperature Instantaneous ambient temperature J Bellows 60 C 100 C Bellows 100 C 200 C L Bellows 250 C 400 C M iston rod material (tainless steel) Blank Cushion needle position standard tandard Cushion needle position Cushion needle position Cushion needle position 6 Copper and FE free (custom order) H ccessory I od eye Y od clevis (with a pin and a snap ring) B1 Eye bracket B2 Clevis bracket (with a pin and a snap ring) troke for Class-2 pressure vessel test Bore size ø200 ø250 troke length 946 and over 752 and over Options,, and for Class-2 pressure vessel test 16

22 C2- eries Internal structure and parts list For ø200, ø ote: are only for cushion type. o. art name Material emarks o. art name Material emarks 1 Hexagon nut teel Zinc chromate 14 Cushion packing itrile rubber/steel 2 Bush Icon-copper oil-impregnated bearing metal 15 Cylinder tube luminum alloy Hard alumite 3 od cover luminum alloy cast metal Chromate 16 iston packing itrile rubber 4 ie rod teel Zinc chromate 17 Wear ring olyacetal resin 5 iston rod teel Industrial chrome plating 18 Cushion ring B teel Zinc chromate 6 Cushion ring teel Zinc chromate Copper alloy (ø125 to ø180) 19 Cushion needle 7 iston gasket itrile rubber teel (ø200, 250) Zinc chromate 8 iston luminum alloy cast metal 20 Hexagon nut teel Zinc chromate 9 Head cover luminum alloy cast metal Chromate 21 eedle gasket itrile rubber 10 Hexagon nut teel Zinc chromate 22 Hexagon socket head cap bolt teel Black oxide finish 11 Dust wiper itrile rubber ø200, 250 only 23 topper ring teel hosphoric acid zinc processing 12 od packing itrile rubber 24 iston rod B teel Industrial chrome plating 13 Cylinder gasket itrile rubber 25 topper teel hosphoric acid zinc processing 26 Hexagon nut teel Zinc chromate epair parts list ame as for the C2-D eries. efer to page

23 Dimensions C2- eries Dimensions Cushion adjustment needle X + (2 troke length) + a* 8-D C WF V Q G 2-EE LL + troke length View GB QB C + troke length + a* troke length B + a* D L ømm øf øj øe Width across flats (B) 2-U XB + (2 troke length) + a* X + l + (2 troke length) + a* b WF + l ød od side Head side XB + l + (2 troke length) + a* (With bellows) ort position diagram (view ) ote 1: indicate the positions of cushion needles. ote 2: efer to dimensions on page 14 for the accessories. *a: stroke adjustable Bore size (mm) B C D EE G J L LL MM B C ø M c1/ M to ø M c3/ M to ø M c3/ M to ø M c3/ M to ø M c3/ M to ø M c M to With bellows D E F Q U V WF X XB Bore size (mm) b d l ø ø10, depth (troke length/4.55) + 11 ø ø10, depth (troke length/4.55) + 9 ø ø14, depth (troke length/5.15) + 9 ø ø14, depth (troke length/5.15) + 9 ø ø14, depth (troke length/5.30) + 9 ø ø14, depth (troke length/6.40) + 9 ote: he dimensions of the individual mounting styles are the same as those of the double acting C2 eries. efer to page 6 to

24 Large bore size cylinder Double acting/heat resistant type C2- eries Bore size: ø125, ø140, ø160, ø180, ø200, ø250 JI symbol pecifications Descriptions C2- (heat-resistant type) Bore size mm ø125 ø140 ø160 ø180 ø200 ø250 ctuation Double acting Working fluid Compressed air Max. working pressure Ma 1.0 Min. working pressure Ma 0.05 roof pressure Ma 1.6 mbient temperature C 5 to 120 (ote 1) ort size c 1/2 c 3/4 c1 troke tolerance mm (to 300), (to 1000), (to 1200) Working piston speed mm/s 20 to 1000 (Use within the allowable energy absorption range.) Cushion ir cushion Effective air cushion length mm Lubrication ot allowed (ote 2) With cushion llowable energy absorption J o cushion he type without cushioning cannot absorb a large energy generated by an external load. We recommend to install an external shock absorber. troke length Cylinder mass (Unit: kg) Descriptions/Mounting style Weight when stroke length () = 0 mm dditional Bore size (mm) Basic type xial foot type Flange type Eye bracket type Clevis bracket type runnion type weight per (00) (LB) (F/FB) (C) (CB) (/B/C) = 100 mm ø ø ø ø ø ø (Example) Weight of C2--LB-125B-300 ote 1: mbient temperature of the products below is 5 to 100 C. Bore size troke length ø and over ø and over ø and over ø and over roduction is possible when the ambient temperature for use is 5 to 120 C. Contact CD separately. ote 2: Heat resistant grease must be applied periodically. Bore size (mm) tandard stroke length (mm) Max. stroke length (mm) Min. stroke length (mm) runnion type min. stroke length (mm) ø ø ø ote 3: Custom stroke ø length is available ø per 1 mm ø increment. ote 4: If the max. stroke is exceeded, product specifications may not be met, depending on operating conditions. Contact CD for details. Weight when = 0 mm kg dditional weight when = 300 mm = 4.62 kg Weight = kg 19 heoretical thrust table (Unit: ) Bore size (mm) ø125 ø140 ø160 ø180 ø200 ø250 Operating Working pressure Ma direction ush ull ush ull ush ull ush ull ush ull ush ull

25 How to order C2- LB 125 B 50 M Y Mounting style ote 1 B Bore size ote on model no. selection C ort thread type ote 1: For hole type trunnions, ø125 to 160 only will be available through custom order. For information such as external dimensions, consult as necessary. ote 2: he instantaneous max. temperature is that at which sparks, swarf, etc., temporarily contact bellows. ote 3: For the cushion needle position indication, check the drawing below. ote 4: "I" and "Y" cannot be selected at the same time. <Example of model number> C2--LB-125 B-50-MY D Cushion E troke length Model: Large bore size cylinder double acting/heat resistant type Mounting style : xial foot type Bore size : ø125 mm ort thread type : c thread Cushion : Both sides cushion troke length : 50 mm Option : iston rod material change(tainless steel) ccessory : od clevis F Option ote 2 Cushion needle position (eedle position with the port faced upward, from the rod direction) tandard ort G ccessory ote 4 ote 3 C2- eries How to order Descriptions Mounting style 00 Basic type LB xial foot type F od end flange type FB Head end flange type C Eye bracket type CB Clevis bracket type (with a pin and a snap ring) C Center trunnion type od end trunnion type B Head end trunnion type F Intermediate supporting hole (Custom order) D od end supporting hole (Custom order) E Head end supporting hole (Custom order) B Bore size (mm) 125 ø ø ø ø ø ø250 C ort thread type Blank c thread thread (Custom order) G G thread (Custom order) D E F Cushion B Both sides cushion od end cushion H Head end cushion o cushion troke length (mm) Bore size troke length Custom stroke length ø125 to ø160 1 to 800 ø180 1 to 900 By 1 mm ø200 1 to 1000 increment ø250 1 to 1200 Option C2 With a check valve on the cushion part L M Blank G Max. ambient temperature 250 C Instantaneous max. temperature 400 C Bellows iston rod material (tainless steel) Cushion needle position standard tandard Cushion needle position Cushion needle position Cushion needle position ccessory I od eye Y od clevis (with a pin and a snap ring) B1 Eye bracket B2 Clevis bracket (with a pin and a snap ring) 20

26 C2- eries Internal structure and parts list For ø200, ø ote: are only for cushion type. o. art name Material emarks o. art name Material emarks 1 Hexagon nut teel Zinc chromate 13 Cylinder gasket Fluoro rubber 2 Bush Icon-copper oil-impregnated bearing metal 14 Cushion packing Fluoro rubber, steel 3 od cover luminum alloy cast metal Chromate 15 Cylinder tube luminum alloy Hard alumite 4 ie rod teel Zinc chromate 16 iston packing Fluoro rubber 5 iston rod teel Industrial chrome plating 17 Wear ring Fiber reinforced phenol resin 6 Cushion ring teel Zinc chromate 18 Cushion ring B teel Zinc chromate 7 iston gasket Fluoro rubber Copper alloy (ø125 to ø180) 19 Cushion needle 8 iston luminum alloy cast metal teel (ø200, 250) Zinc chromate 9 Head cover luminum alloy cast metal Chromate 20 Hexagon nut teel Zinc chromate 10 Hexagon nut teel Zinc chromate 21 eedle gasket Fluoro rubber 11 Dust wiper Fluoro rubber ø200, 250 only 12 od packing Fluoro rubber epair parts list Bore size (mm) it no. epair parts no. ø125 C ø140 C ø160 C ø180 C ø200 C ø250 C

27 Dimensions C2- eries Dimensions M MO (Width across flats) X + troke length 8-D C WF V Q U G LL + troke length View 2-EE GB QB (M) L ømm øj Width across flats (B) X + l + troke length WF + l b ød od side Head side (With bellows) ort position diagram (view ) ote 1: indicate the positions of cushion needles. ote 2: For the l dimensions, the decimal places have been rounded out. ote 3: efer to dimensions on page 14 for the accessories. Basic type (00) Basic dimensions Bore size (mm) B C D EE G GB J L LL M MM M MO ø M c1/ M to ø M c3/ M to ø M c3/ M to ø M c3/ M to ø M c3/ M to ø M c M to With bellows Bore size (mm) Q QB U V WF X b d l ø (troke length/4.55) + 11 ø (troke length/4.55) + 9 ø (troke length/5.15) + 9 ø (troke length/5.15) + 9 ø (troke length/5.30) + 9 ø (troke length/6.40) + 9 ote: he dimensions of the individual mounting styles are the same as those of the double acting C2 eries. efer to page 6 to

28 Large bore size cylinder Double acting/double rod/lubrication type/non-lubrication type C2-D eries Bore size: ø125, ø140, ø160, ø180, ø200, ø250 JI symbol pecifications Descriptions C2-D/C2-LD(Double rod type) Bore size mm ø125 ø140 ø160 ø180 ø200 ø250 ctuation Double acting Working fluid Compressed air Max. working pressure Ma 1.0 Min. working pressure Ma 0.1 roof pressure Ma 1.6 mbient temperature C -5 to 60 (no freezing) ort size c 1/2 c 3/4 c1 troke tolerance mm (to 300), (to 1000), (to 1200) Working piston speed mm/s 20 to 1000 (Use within the allowable energy absorption range. ) Cushion ir cushion Effective air cushion length mm Lubrication For C-D, required (when lubricating, use turbine oil Class 1 IO VG32.); for C-LD, not required With cushion llowable energy absorption J o cushion he type without cushioning cannot absorb a large energy generated by an external load. We recommend to install an external shock absorber. * Custom order troke length Bore size (mm) tandard stroke length (mm) Max. stroke length (mm) Min. stroke length (mm) runnion type min. stroke length (mm) ø ø ø ø ø200 1, ø250 1, ote 1: Custom stroke length is available per 1 mm increment. ote 2: If the max. stroke is exceeded, product specifications may not be met, depending on operating conditions. Contact CD for details. Min. stroke length with switch Descriptions Bore size (mm) troke length with same surface installation troke length of intermediate supporting hole troke length of rod end supporting hole troke length of head end supporting hole Diagram ort ort ort ort witch type eed switch (*) Bore he position cannot be detected at the rod side stroke end. ø and over 70 and over ø and over 75 and over ø and over 80 and over 20 and over ø and over 85 and over ø and over 90 and over ø and over 100 and over he position cannot be detected at the head side stroke end. 23