DESIGNER COVE 1000 LUMEN LED

Transcription

1 Type: Catalog No.: Project: ENVIRONMENTAY FRIENDY, ENERGY EFFICIENT Comparable light output and beam distribution of MR16 halogen lamp, utilizing less than 1/3 to 1/4 of the energy and having a rated life of 50,000 hours Optics and ED s coordinated to match the Juno Trac offering No harmful ultraviolet or infrared wavelengths No lead or mercury PRODUCT SPECIFICATIONS EECTRICA ED ight Engine: High output ED arrays provide outstanding reliability, performance and color quality/consistency 2700K, 3000K, 3500K or 4000K white phosphor high performance EDs 80 CRI minimum, 90 CRI available, see options (lumen drop of approximately 30%) Spectral hite white enhancing option makes whites appear naturally brilliant (lumen drop of approximately 40%) Removable lamp heads allow for easy replacement/maintenance of ED light engine Optics: Interchangeable computer-designed custom TIR optics available in four factory-configured beam spreads One TIR optic provided with fixture (as specified in catalog number) Accessory optics available to enable beam changes in the field Beam patterns can be altered as desired using a variety of available light control accessories Dimming: Dimmable via 0-10V controller For a list of compatible dimmers see ED-DIM ED Driver: Universal driver accommodates 120V to 277V input volts AC at 50/60Hz 347V available Power factor >0.9 Easily replaceable from below or above the ceiling. ife: Rated for 50,000 hours at 70% lumen maintenance ABES AND ISTINGS U listed for dry/damp locations U and cu, RoHS complaint EMI complies with FCC 47, Part 15, Class A ENERGY STAR certified, see page 5 for designated products I.B.E.. Union made ARRA Compliant arranty 5-year limited warranty. Complete warranty terms located at: Specifications subject to change without notice. ORDERING INFORMATION - Complete Fixture Ordering Example: DCS16 2H F1 F2 10M 27K 120 NT G3 80CRI ZT B DI HBT Complete Unit - (Use when ordering a complete fixture; rough-in, fixture heads, options and accessories) Series ED Heads Distribution Head 1 Distribution Head 2 Distribution Head 3 umens Color Temperature DCS16 Designer Cove Series ED MR16 Multi-light 1H 2H 3H 1 ED Head 2 ED Head 3 ED Head F1 Flood N1 Narrow Flood S1 Spot F1 ide Flood F2 Flood N2 Narrow Flood S2 Spot F2 ide Flood F3 Flood N3 Narrow Flood S3 Spot F3 ide Flood 10M 1000 umens 27K 2700K 30K 3000K 35K 3500K 40K 4000K Voltage Trim Generation CRI Driver Option Finish Options Mounting Hardware Volt Volt Volt (Blank) hite Flange NT No Trim G3 Generation 3 80CRI 80+ CRI 90CRI 90+ CRI S 1 Spectral hite DAI DAI Control Dimming ZT 0-10V Dimming B Black H hite F 2 Fuse and Fuse Holder CP Chicago Plenum DI umen Depreciation Indicator N 3 night Total Fixture Control NH night Individual Head Control BF Black Flange (hite Flange comes standard) HB28 HB52 HBT B27 28" C-Channel 52" C-Channel 25" Tru-ock Grid Ceiling 27" inear Bar Hangers, Printed in U.S.A Acuity Brands ighting, Inc. Rev. 07/13/17 1 of 5

2 ORDERING INFORMATION - Accessories Order as separate catalog number. HCB 200 ouver 2 Dia. w/ 1/8" Sq. Cells CGF 200 DTBUE Daylite Blue Color Filter PRISM 200 Prismatic Spread ens CGF 200 MPINK Med. Pink Color Filter CGF 200 MAMB Med. Amber Color Filter SPREAD 200 inear Spread ens CGF 200 RED arm Red Color Filter CGF 200 MGRN Med. Green Color Filter SOITE 200 Uniformity ens ORDERING INFORMATION - Rough-In Only Ordering Example: DCSR16 1H 10M 120 NT G3 ZT B DI Individual Component - (Use when ordering rough-in housing, fixture heads, options and accessories separately) Series ED Heads umens Voltage Trim DCSR16 Designer Cove Series ED Multi-light Hosing 1H 2H 3H 1 ED Head 2 ED Head 3 ED Head 10M 1000 umens Volt Volt Volt (Blank) NT hite Flange No Trim Generation Driver Option Finish Options G3 Generation 3 DAI DAI Control Dimming B Black F 2 Fuse and Fuse Holder ZT 0-10V Dimming H hite CP Chicago Plenum DI umen Depreciation Indicator N 3 night Total Fixture Control NH night Individual Head Control BF Black Flange (hite Flange comes standard) ORDERING INFORMATION - Head Only Ordering Example: DCSH16 F1 10M 27K G3 80CRI B Individual Component - (Use when ordering rough-in housing, fixture heads, options and accessories separately) Series Distribution Head 1 umens Color Temperature Generation CRI Finish DCSH16 Designer Cove Series MR16 ED Head F1 N1 S1 Flood Narrow Flood Spot 10M 1000 umens 27K 2700K 30K 3000K 35K 3500K G3 Generation 3 80CRI 80+ CRI 90CRI 90+ CRI S 1 Spectral hite B H Black hite F1 ide Flood 40K 4000K 1 Excludes 27K 2 Must specify voltage. 3 Use N Option for 1 ight 4 347V not available for N & NH options. Printed in U.S.A Acuity Brands ighting, Inc. Rev. 07/13/17 2 of 5

3 MECHANICA ED fixture head: Aluminum die-cast housing is removable for ease of maintenance and provides interchangeability of beam distributions Twist and locks securely into place ED fixture heads can be ordered and shipped separately from rough-in housing Available with Spot, Narrow Flood, Flood and ide Flood beam spreads Adjustability: Yoke assembly allows 355 rotation and up to 75 tilt of lamp housing and features rotation and tilt locking Yoke features 2 vertical adjustment allowing fixture head to be extended below ceiling Housing: Heavy gauge cold rolled steel with white or black finish Universal housing design installs in suspended grid, plaster or drywall Heat sink conducts heat away from ED light engine Drivers are accessible from above and below ceiling ight engine and driver can be upgraded to accommodate future technology improvements Rough-in housing can be ordered separately from fixture heads, see Individual Component Ordering Information on next page Mounting Bracket: Mounting brackets have 3 vertical adjustment and accept proprietary TRU-OCK bar hangers, 1-1/2 C-channel and flat linear bars (order as accessories) or 1-1/2 EMT, 3/4 and 1-1/2 lathing channel (by others) One-piece Tru-ock bar hangers have integral T-bar locking screws and alignment notches for locating and locking fixture in the center or 1/4 tile increments Trim: All units are furnished with a heavy gauge white baked enamel trim Trimless option also available. DIMENSIONS Flange Trim 7-1/8 8-3/8 A B A CEIING CUT-OUT B FANGE # of Heads Ceiling Cut-out A Flange Trim B Dimension C 1 7-1/4 x 7-1/4 8 x 7-7/ /4 x 13-3/8 8 x /4 x 23-3/4 8 x 24-3/8 31-1/2 ED fixture heads can be ordered and shipped separately from rough-in housing. C No Trim 7-1/4 8-7/8 FIXTURE PATE SUSPENSION IRE OR CABE A A CEIING CUT-OUT C CHANNES CEIING MATERIA # of Heads Ceiling Cut-out A 1 7-3/8 x /8 x 14-1/ /8 x 21-1/4 ED fixture heads can be ordered and shipped separately from rough-in housing. JOINT COMPOUND Built-in Plaster Flange Installation Printed in U.S.A Acuity Brands ighting, Inc. Rev. 07/13/17 3 of 5

4 PHOTOMETRICS CBCP Centerbeam candlepower FC Footcandles at beam center (aim point) FOR HORIZONTA AIMING ANGES FOR VERTICA AIMING ANGES D In vertical aiming applications, aim point (X) is determined by dividing distance from the wall (D) by the tangent of the desired aim angle (A) ( for 30, 1.0 for 45,1.732 for 60 ). MH A 0 A 0 X Aiming Angle (A = 0) Aiming Angle (A = 30) Horizontal Aiming Angles Vertical Aiming Angles Fixture 14.5 ED 30K/35K/40K Beam Type Beam Spread Rated ife MH FC FC D FC X FC X D FC X CBCP SP NF F F The beam spread in degrees and the beam and in the above tables are computed at 50% of centerbeam candlepower and represent areas of effective illumination. For 2700K fixtures, use 0.94 multiplier. For 90 CRI, use 0.71 multiplier; For Spectral hite, use 0.61 multiplier Fixtures tested to IES recommended standard for solid state lighting per M Photometric performance on a single unit represents a baseline of performance for the fixture. Results may vary in the field. Printed in U.S.A Acuity Brands ighting, Inc. Rev. 07/13/17 4 of 5

5 ENGINEERING DATA Voltage 120V 277V ight Engine umens CCT 27K/30K/35K/40K 27K/30K/35K/40K 1-ight Input Current 0.12A 0.07A Input attage ight Input Current 0.23A 0.11A Input attage ight Input Current 0.34A 0.16A Input attage Input Frequency 50/60Hz 50/60Hz Power Factor >0.99 > N option will add 1.3 watts per fixture/nh option will add 1.3 watts per head 347 Volt available, consult factory Volt available excluding N & NH options, consult factory. PERFORMANCE DATA Input Catalog Number Voltage Input atts (Typical) umens Efficacy (P) Rated ife (Hours) SPOT - 30K 120V ,000 NARRO FOOD - 30K 120V ,000 FOOD - 30K 120V ,000 IDE FOOD - 30K 120V ,000 ENERGY STAR certified PRODUCT# FIXTURE CONFIGURATIONS = ENERGY STAR Complete Unit, 80 CRI Beam Spread: X = S, N, F, DCS16-(X/X/X)-10(YY)(Z)-(AA)3 CCT: YY = 27, 30, 35, 40 Voltage: Z = 120, 277 Finish Color: AA = H, B Rough-in/amp Head, 80 CRI amp Heads: X = 1, 2, 3 DCSR16(X)-10(Z)-(AA)3; DCSH16(B)-10(YY)-(AA)-3 CCT: YY = 27, 30, 35, 40 Voltage: Z = 120, 277 Beam Spread: B = S, N, F, Finish Color: CC = H, B Printed in U.S.A Acuity Brands ighting, Inc. Rev. 07/13/17 5 of 5