AX3 A. Trim Style Reflector Finish Flange Style / Finish Environmnet Ceiling Installation

Transcription

1 PRODUCT SPECIFICTIONS ED ight Engine Consistent fixture to fixture color within 3-step Macdam ellipse 2700K, K, 3500K, or K color temperatures are available with 80 CRI minimum 2700K and K also available with 90 CRI minimum. Modular Optics 45 cutoff to source and source image vailable with 12 Spot, 24 Narrow Flood, 35 Flood and 5 wide flood field interchangeable optics dditional distributions of 2, 3, 4, 45 and 6 FHM can be achieved with the use of the diffusing films and spot primary optic Patented (US Patent 8,950,911) auto-adjusting optic holder maximizes luminaire efficiency by maintaining optimal ED optic position ccommodates up to three (3) additional beam control lenses and/or filters. djustability cu-im precision geared hot-aiming achieves 37 rotation, 45 tilt Optimized center beam optics translates light engine forward as it is aimed off nadir, ensuring maximum light and low brightness Black aiming mechanism preserves dark aperture. Trims Style, Self Flanged and reflectors utilize torsion spring retention for tight, secure fit to ceiling Trim ring features beveled knife edge for clean ceiling interface Self Flanged reflectors with polished or optional white painted flange For flangeless installations in drywall ceilings use the FM3 flangeless adapter For flangeless installations in wood, stone, or tile ceilings the SFM3 must be used (specify ceiling thickness and adapter finish). ED Driver Seven (7) driver options available to accommodate V input and multiple control protocols For a list of compatible dimmers, refer to CXED3-DIM Power Factor > 0.9 Field replaceable from below or above ceiling. ife Rated for 50,000 hrs at 70% lumen maintenance. arranty - 5YR 5-year limited warranty. Complete warranty terms located at: et location listed with certain trims ICT rated luminaires meet energy code ir eakage requirements per STM E283 ENERGY STR Certified with select trims ICT rated luminaires with 90CRI light engine are certified to high efficacy requirements of California T24 with select color temperatures and trims ICT housings are rated for direct contact with insulation X3 08M/12M (ICT option) and X3 P 08M/12M (ICT Option) are compatible with spray foam insulation with an R-Value of 3.7 per inch or less Union made. CUUX UMINIRE uminaire Type: Catalog Number (autopopulated): 3 ED UNIVERS RECESSED DJUSTBE/DONIGHT/ SH 800//1500/ UMEN ROUND PERTURE NE CONSTRUCTION X3 X3 X3 (20M ICT) X3 P (ow Profile) New Construction Mounting Features patented (US Patent 8,038,113) Pro-VI bar hanger system, permitting quick placement of housing with 24 on-center joists or suspended ceilings ll fixtures except for X3 20M (ICT option) also feature vertically adjustable mounting brackets (butterfly brackets) Centerline indicators on plaster frame and patented (US Patent 8,277,090) Tru-ine Platform featuring +/- ½ translation aids fixture alignment after installation, prior to drywall. Junction Box Rated for 4 No. 12 G 9 C through branch circuit conductors and includes (6) ½, (1) ¾, and (4) Non-metallic sheathed cable knock-outs Push-in electrical connectors for field connections. Specifications subject to change without notice. ORDERING INFORMTION Example: X3 12M 30K 80CRI 24D FPC 120 ICT 3BV BS SF CT/125 HOUSING OPTIONS TRIM OPTIONS NOTES Series / Housing Style umens CCT CRI Driver Voltage 1 Options X3 New Const. Universal 08M 800 umens 27K 2700K 80CRI 12D 12 beam EZ1 eldoed 0-10V, 1%dim 120 CP Chicago Plenum DJ/D/ 12M umens 30K K 90CRI 24D 24 beam EZB eldoed 0-10V, <1% dim 277 ICT IC, ir-tight X3 P ow Profile Universal 15M 1500 umens 35K 3500K 35D 35 beam FPC Phase cut dimming, 5% dim MVOT NIGHT 2 night dimming pack DJ/D/ 20M umens 40K K 50D 5 beam ECOS2 utron Hi-ume series 2-wire forward phase, 1% dim ( ) controls ECOS3 utron Hi-ume series 3-wire with EcoSystem, 1% dim DMXR DMX,RDM Driver, 1% dim DI DI Driver, 1% dim Trim Style Reflector Finish Flange Style / Finish Environmnet Ceiling Installation DJUSTBE CCENT DONIGHT BS Black Specular FNGED ET et SEF-FNGED 3C 6 ngle-cut Reflector 45 3DP 6 Parabolic Downlight Trim CD Clear Diffuse SF Self Flanged (same finish as reflector) location Ceiling <.875 3SOT 6 Slot Cut Reflector 45 3DH 6 Hyperbolic Downlight Trim CS Clear Specular HSF Self Flanged, hite painted flange CT3/125 Ceiling C20 6 Shallow ngle-cut Reflector 2 3DBF 4 Baffle Downlight Trim TD heat Diffuse BSF Self Flanged, Black painted flange CT3/163 Ceiling BF 4 ngle-cut Baffle 3DBV 5 Downlight Bevel B Black Paint HR hite FNGEESS, GYPSUM 3BV 5 djustable Bevel 3DPIN 7 Downlight Pinhole, 1 1/4 hite Paint SCR Satin Chrome FM3/087 Ceiling <.875 3PIN 7 djustable Pinhole, 1 1/4 BZR ged Bronze FM3/125 Ceiling PING 7 djustable Pinhole, 1 3/4 SH FNGEESS 8 FM3/163 Ceiling OV 5 djustable Slot Pinhole 3 6 all ash FM FNGEESS, OOD/STONE/TIE 3 Ordering Notes 1 4 MVOT standard on EZ1, EZB, ECOS3, DMXR, DI unless NIGHT specified. Must be 120 for FPC or ECOS2. vailable with B,, BZR, HR, SCR only. 2 5 Must specify 120 or 277 volts. NIGHT only available with EZ1 or EZB. vailable with BS, BSF, HSF, BFM, HFM only. 3 6 Specify finish : B = Black, = hite. Not available with BSF, HFM, BFM. HFM, hite trim SFM3/087 (B,) Ceiling < BFM, Black trim SFM3/125 (B,) Ceiling SFM3/163 (B,) Ceiling vailable with BS, BZR, BSF, SCR, HSF, BFM, HFM only. 8 For trims, specify flangeless ceiling installation (FM3 or SFM3) + Capable options indicated by this color background S. olf Road Des Plaines, I 18 Phone (847) Fax (847) Visit us at Printed in U.S cuity Brands ighting, Inc. Rev. 03/01/17 1 of 32

2 DIMENSIONS NE CONSTRUCTION 13 3/4" ill expand to 24 3/8" (Reduces to 9 1/4" with breakaway feature) O PROFIE 13 1/2" 18" X3 20M ICT 13 3/4" ill expand to 24 3/8" (Reduces to 10 3/4" with breakaway feature) 13 3/4" ill expand to 24 3/8" (Reduces to 10 3/4" with breakaway feature) 15 1/8" 19 5/8" 15 1/8" 19 5/8" 5 7/16" 4 1/4 CEIING CUTOUT (REFER TO INSTRUCTION SHEET FOR FNGEESS CEIING CUTOUT) X3 X3 P EECTRIC DT umen Package Voltage Input Power Input Current Frequency 50/60Hz 50/60Hz 50/60Hz 50/60Hz Power Factor >0.9 > 0.9 > 0.9 > 0.9 > 0.9 > 0.9 > 0.9 > 0.9 4" 8 15/16" Max. DIFFUSING FIMS 3 ED UNIVERS RECESSED DJUSTBE/DONIGHT/ SH 800//1500/ UMEN ROUND PERTURE NE CONSTRUCTION X3 CCESSORIES Cat. # Description 3XOPT/12D 12 Spot Optic 3XOPT/24D 24 Narrow Flood Optic 3XOPT/35D Flood Optic 3XOPT/50D 50 ide Flood Optic F3/10 10 Film (Use with Spot Optic) F3/20 20 Film (Use with Spot Optic) F3/30 30 Film (Use with Spot Optic) F3/40 40 Film (Use with Spot Optic) F3/50 50 Film (Use with Spot Optic) F3/60x1 60 x1 Film (Use with Spot Optic) CGF 200 MPINK Med. Pink Filter CGF 200 RED arm Red Filter CGF 200 DTBUE Daylight Blue Filter CGF 200 MBU Med. Blue Filter CGF 200 MMB Med. mber Filter CGF 200 MGRN Med. Green Filter DGF 200 DRED Red Dichroic ens DGF 200 MGRN Med. Green Dichroic ens DGF 200 MBU Med. Blue Dichroic ens DGF 200 DYE Yellow Dichroic ens DGF 200 MGEN Magenta Dichroic ens DGF 200 CYN Blue Green Dichroic ens DCCF 200 H4250 Daylight Blue Correction ens DIFF 200 Diffuse Spread ens SOITE 200 Uniformity ens UVF 200 UV Filter ens PRISM 200 Prismatic ens SPRED 200 inear Spread ens HCB 200 Hexcell ouver HB1 (2) Real Nail 3 Bar Hangers HB26 (2) 26 C-Channel Bar Hangers HB50 (2) 50 C-Channel Bar Hangers B27 (2) 27 inear Bar Hangers EMI20 20 Emergency ighting Inverter To order, specify catalog number. To achieve the desired beam angle (FHM), specify the following primary ED optic on the luminaire and order the diffusing film from the table below Desired FHM Primary Optic Film 12 12D D F3/ D D F3/20 35D D F3/30 12D F3/ D D F3/50 20 x60 12D F3/60x S. olf Road Des Plaines, I 18 Phone (847) Fax (847) Visit us at Printed in U.S cuity Brands ighting, Inc. Rev. 03/01/17 2 of 32

3 TRIM SEECTION DJUSTBE CCENT 3 ED UNIVERS RECESSED DJUSTBE/DONIGHT/ SH 800//1500/ UMEN ROUND PERTURE NE CONSTRUCTION X3 3C ngle-cut Reflector, perture : 3 1/4 Self-Flanged * CCT/CRI: 80CRI 27K, 30K, 35K, 40K 90CRI 30K Optic: 12D, 24D, 35D, 50D Trim Finish: CS, CD, TD Construction: ICT CCT/CRI: 90CRI 27K, 30K Optic: 12D, 24D, 35D, 50D Trim Finish: CS, CD, TD 3SOT Slot Cut Reflector, perture : 3 1/4 CCT/CRI: Optic: Trim Finish: 80CRI 27K, 30K, 35K, 40K 90CRI 30K 12D, 24D, 35D, 50D CS, CD, TD Construction: ICT CCT/CRI: 90CRI 27K, 30K Optic: 12D, 24D, 35D, 50D Trim Finish: CS, CD, TD Self-Flanged 3C20 Shallow ngle-cut Reflector, 20 perture : 3 1/4 CCT/CRI: Optic: Trim Finish: 80CRI 27K, 30K, 35K, 40K 90CRI 30K 12D, 24D, 35D, 50D CS, CD, TD Construction: ICT CCT/CRI: 90CRI 27K, 30K Optic: 12D, 24D, 35D, 50D Trim Finish: CS, CD, TD Self-Flanged 3BF ngle-cut Baffle, perture : 3 1/4 5" CCT/CRI: Optic: Trim Finish: 80CRI 27K, 30K, 35K, 40K 90CRI 30K 12D, 24D, 35D, 50D Construction: ICT CCT/CRI: 90CRI 27K, 30K Optic: 12D, 24D, 35D, 50D Trim Finish: 3BV djustable Bevel, perture : 1 3/4 4 5/8" 3 7/8" * CCT/CRI: Optic: 80CRI 27K, 30K, 35K, 40K 12D, 24D, 35D Construction: ICT CCT/CRI: 90CRI 27K, 30K Optic: 12D, 24D, 35D 3PIN djustable Pinhole, perture : 1 1/4 * 5" 3 7/8" 3PING djustable Pinhole, 1 3/4, perture : 1 3/4 5" 3 7/8" 3OV djustable Slot Pinhole, perture : 1 3/4 x 2 1/2 5" 3 7/8" * ith ET option 1300 S. olf Road Des Plaines, I 18 Phone (847) Fax (847) Visit us at Printed in U.S cuity Brands ighting, Inc. Rev. 03/01/17 3 of 32

4 TRIM SEECTION (continued) DONIGHT 3DP Parabolic Downlight Trim perture : 3 1/4 Self-Flanged 3 ED UNIVERS RECESSED DJUSTBE/DONIGHT/ SH 800//1500/ UMEN ROUND PERTURE NE CONSTRUCTION X3 * CCT/CRI: 80CRI 27K, 30K, 35K, 40K 90CRI 30K Optic: 12D, 24D, 35D, 50D Trim Finish: CS, CD, TD Construction: ICT CCT/CRI: 90CRI 27K, 30K Optic: 12D, 24D, 35D, 50D Trim Finish: B, CS, CD, TD 3DH Hyperbolic Downlight Trim perture : 3 1/4 CCT/CRI: Optic: Trim Finish: 80CRI 27K, 30K, 35K, 40K 90CRI 30K 12D, 24D, 35D, 50D CS, CD, TD Construction: ICT CCT/CRI: 90CRI 27K, 30K Optic: 12D, 24D, 35D, 50D Trim Finish: B, CS, CD, TD Self-Flanged 3DBF Baffle Downlight Trim perture : 3 1/4 5" CCT/CRI: Optic: Trim Finish: 80CRI 27K, 30K, 35K, 40K 90CRI 30K 12D, 24D, 35D, 50D Construction: ICT CCT/CRI: 90CRI 27K, 30K Optic: 12D, 24D, 35D, 50D Trim Finish: 3DBV Downlight Bevel perture : 1 3/4 4 5/8" 3 7/8" * CCT/CRI: Optic: 80CRI 27K, 30K, 35K, 40K 12D, 24D, 35D Construction: ICT CCT/CRI: 90CRI 27K, 30K Optic: 12D, 24D, 35D 3DPIN Downlight Pinhole perture : 1 1/4 * 5" 3 7/8" SH 3 all ash perture : 3 1/4 Self-Flanged * ith ET option 1300 S. olf Road Des Plaines, I 18 Phone (847) Fax (847) Visit us at Printed in U.S cuity Brands ighting, Inc. Rev. 03/01/17 4 of 32

5 3C ngle-cut Reflector Self-Flanged Test Report: PT D FPC 120 3C CS umens: 1847 uminaire P: NRRO FOOD Test Report: PT D FPC 120 3C CS umens: 1918 uminaire P: ED UNIVERS RECESSED DJUSTBE/DONIGHT/ SH 800//1500/ UMEN ROUND NGE-CUT REFECTOR 3C Trim FOOD Test Report: PT D FPC 120 3C CS umens: 1936 uminaire P: IDE FOOD Test Report: PT D FPC 120 3C CS umens: 1716 uminaire P: UMEN OUTPUT MUTIPIERS umen K K.83 K.87 CBCP Centerbeam candlepower FC Footcandles at beam center (aim point) FOR HORIZONT IMING NGES MH iming ngle ( = ) iming ngle ( = 3) FOR VERTIC IMING NGES D X In vertical aiming applications, aim point (X) is determined by dividing distance from the wall (D) by the tangent of the desired aim angle () ( for 30, 1.0 for ). Horizontal iming ngles Vertical iming ngles Type Spread CBCP MH FC FC D FC X FC X SP NF F F S. olf Road Des Plaines, I 18 Phone (847) Fax (847) Visit us at Printed in U.S cuity Brands ighting, Inc. Rev. 03/01/17 5 of 32

6 3C ngle-cut Reflector Self-Flanged Test Report: PT D FPC 120 3C CS ET umens: 1723 uminaire P: NRRO FOOD Test Report: PT D FPC 120 3C CS ET umens: 1771 uminaire P: ED UNIVERS RECESSED DJUSTBE/DONIGHT/ SH 800//1500/ UMEN ROUND NGE-CUT REFECTOR 3C Trim with ET option FOOD Test Report: PT D FPC 120 3C CS ET umens: 1808 uminaire P: IDE FOOD Test Report: PT D FPC 120 3C CS ET umens: 1574 uminaire P: UMEN OUTPUT MUTIPIERS umen K K.83 K.87 CBCP Centerbeam candlepower FC Footcandles at beam center (aim point) In vertical aiming applications, aim point (X) is determined by dividing distance from the wall (D) by the tangent of the desired aim angle () ( for 30, 1.0 for ). Type MH FOR HORIZONT IMING NGES iming ngle ( = ) iming ngle ( = 3) Horizontal iming ngles Vertical iming ngles Spread CBCP MH FC FC D FC X FC X SP NF F F FOR VERTIC IMING NGES D X 1300 S. olf Road Des Plaines, I 18 Phone (847) Fax (847) Visit us at Printed in U.S cuity Brands ighting, Inc. Rev. 03/01/17 6 of 32

7 3SOT Slot Cut Reflector Self-Flanged Test Report: PT R 12D FPC 120 3SOT CS umens: 1847 uminaire P: NRRO FOOD Test Report: PT R 24D FPC 120 3SOT CS umens: 1918 uminaire P: ED UNIVERS RECESSED DJUSTBE/DONIGHT/ SH 800//1500/ UMEN ROUND SOT-CUT REFECTOR 3SOT Trim FOOD Test Report: PT R 35D FPC 120 3SOT CS umens: 1936 uminaire P: IDE FOOD Test Report: PT R 50D FPC 120 3SOT CS umens: 1716 uminaire P: UMEN OUTPUT MUTIPIERS umen K K.83 K.87 FOR HORIZONT IMING NGES MH FOR VERTIC IMING NGES D X CBCP Centerbeam candlepower FC Footcandles at beam center (aim point) iming ngle ( = ) iming ngle ( = 3) In vertical aiming applications, aim point (X) is determined by dividing distance from the wall (D) by the tangent of the desired aim angle () ( for 30, 1.0 for ). Horizontal iming ngles Vertical iming ngles Type Spread CBCP MH FC FC D FC X FC X SP NF F F S. olf Road Des Plaines, I 18 Phone (847) Fax (847) Visit us at Printed in U.S cuity Brands ighting, Inc. Rev. 03/01/17 7 of 32

8 3C20 Shallow ngle-cut Reflector, 20 Self-Flanged Test Report: PT D FPC 120 3C20 CS umens: 1825 uminaire P: NRRO FOOD Test Report: PT D FPC 120 3C20 CS umens: 1912 uminaire P: ED UNIVERS RECESSED DJUSTBE/DONIGHT/ SH 800//1500/ UMEN ROUND SHO NGE-CUT REFECTOR 3C20 Trim FOOD Test Report: PT D FPC 120 3C20 CS umens: 1952 uminaire P: IDE FOOD Test Report: PT D FPC 120 3C20 CS umens: 1729 uminaire P: UMEN OUTPUT MUTIPIERS umen K K.83 K.87 FOR HORIZONT IMING NGES MH FOR VERTIC IMING NGES D X CBCP Centerbeam candlepower FC Footcandles at beam center (aim point) In vertical aiming applications, aim point (X) is determined by dividing distance from the wall (D) by the tangent of the desired aim angle () ( for 30, 1.0 for ). Type iming ngle ( = ) iming ngle ( = 3) Horizontal iming ngles Vertical iming ngles 2 2 Spread CBCP MH FC FC D FC X SP NF F F S. olf Road Des Plaines, I 18 Phone (847) Fax (847) Visit us at Printed in U.S cuity Brands ighting, Inc. Rev. 03/01/17 8 of 32

9 3BF ngle-cut Baffle " Test Report: PT D FPC 120 3BF umens: 1794 uminaire P: NRRO FOOD Test Report: PT D FPC 120 3BF umens: 1835 uminaire P: ED UNIVERS RECESSED DJUSTBE/DONIGHT/ SH 800//1500/ UMEN ROUND NGE-CUT BFFE 3BF Trim FOOD Test Report: PT D FPC 120 3BF umens: 1895 uminaire P: IDE FOOD Test Report: PT D FPC 120 3BF umens: 1577 uminaire P: UMEN OUTPUT MUTIPIERS umen K K.83 K.87 CBCP Centerbeam candlepower FC Footcandles at beam center (aim point) In vertical aiming applications, aim point (X) is determined by dividing distance from the wall (D) by the tangent of the desired aim angle () ( for 30, 1.0 for ). Type MH FOR HORIZONT IMING NGES iming ngle ( = ) iming ngle ( = 3) Horizontal iming ngles Vertical iming ngles Spread CBCP MH FC FC D FC X FC X SP NF F F FOR VERTIC IMING NGES D X 1300 S. olf Road Des Plaines, I 18 Phone (847) Fax (847) Visit us at Printed in U.S cuity Brands ighting, Inc. Rev. 03/01/17 9 of 32

10 3BV djustable Bevel 4 5/8" Test Report: PT D FPC 120 3BV umens: 1531 uminaire P: Type /8" NRRO FOOD Test Report: PT D FPC 120 3BV umens: 1581 uminaire P: 60 UMEN OUTPUT MUTIPIERS umen K K.83 K.87 CBCP Centerbeam candlepower FC Footcandles at beam center (aim point) In vertical aiming applications, aim point (X) is determined by dividing distance from the wall (D) by the tangent of the desired aim angle () ( for 30, 1.0 for ) MH 3 ED UNIVERS RECESSED DJUSTBE/DONIGHT/ SH 800//1500/ UMEN ROUND DJUSTBE BEVE 3BV Trim FOOD Test Report: PT D FPC 120 3BV umens: 1750 uminaire P: FOR HORIZONT IMING NGES iming ngle ( = ) iming ngle ( = 3) Horizontal iming ngles Spread CBCP MH FC FC D FC X FC X SP NF F F IDE FOOD Test Report: PT D FPC 120 3BV umens: 1400 uminaire P: FOR VERTIC IMING NGES Vertical iming ngles D X S. olf Road Des Plaines, I 18 Phone (847) Fax (847) Visit us at Printed in U.S cuity Brands ighting, Inc. Rev. 03/01/17 10 of 32

11 3BV djustable Bevel 4 5/8" Test Report: PT D FPC 120 3BV ET umens: 1370 uminaire P: Type /8" NRRO FOOD Test Report: PT D FPC 120 3BV ET umens: 1442 uminaire P: 55 UMEN OUTPUT MUTIPIERS umen K K.83 K.87 CBCP Centerbeam candlepower FC Footcandles at beam center (aim point) In vertical aiming applications, aim point (X) is determined by dividing distance from the wall (D) by the tangent of the desired aim angle () ( for 30, 1.0 for ) MH 3 ED UNIVERS RECESSED DJUSTBE/DONIGHT/ SH 800//1500/ UMEN ROUND DJUSTBE BEVE 3BV Trim with ET option FOOD Test Report: PT D FPC 120 3BV ET umens: 1581 uminaire P: FOR HORIZONT IMING NGES iming ngle ( = ) iming ngle ( = 3) Horizontal iming ngles Spread CBCP MH FC FC D FC X FC X SP NF F F IDE FOOD Test Report: PT D FPC 120 3BV ET umens: 1279 uminaire P: FOR VERTIC IMING NGES Vertical iming ngles D X S. olf Road Des Plaines, I 18 Phone (847) Fax (847) Visit us at Printed in U.S cuity Brands ighting, Inc. Rev. 03/01/17 11 of 32

12 3PIN djustable Pinhole Test Report: PT D FPC 120 3PIN umens: 877 uminaire P: " 3 7/8" NRRO FOOD Test Report: PT D FPC 120 3PIN umens: 1085 uminaire P: ED UNIVERS RECESSED DJUSTBE/DONIGHT/ SH 800//1500/ UMEN ROUND DJUSTBE PINHOE 3PIN Trim FOOD Test Report: PT D FPC 120 3PIN umens: 1192 uminaire P: IDE FOOD Test Report: PT D FPC 120 3PIN umens: 713 uminaire P: UMEN OUTPUT MUTIPIERS umen K K.83 K.87 CBCP Centerbeam candlepower FC Footcandles at beam center (aim point) FOR HORIZONT IMING NGES MH iming ngle ( = ) iming ngle ( = 3) FOR VERTIC IMING NGES D X In vertical aiming applications, aim point (X) is determined by dividing distance from the wall (D) by the tangent of the desired aim angle () ( for 30, 1.0 for ). Horizontal iming ngles Vertical iming ngles Type Spread CBCP MH FC FC D FC X FC X SP NF F F S. olf Road Des Plaines, I 18 Phone (847) Fax (847) Visit us at Printed in U.S cuity Brands ighting, Inc. Rev. 03/01/17 12 of 32

13 3PIN djustable Pinhole Test Report: PT D FPC 120 3PIN ET umens: 878 uminaire P: " 3 7/8" NRRO FOOD Test Report: PT D FPC 120 3PIN ET umens: 1087 uminaire P: ED UNIVERS RECESSED DJUSTBE/DONIGHT/ SH 800//1500/ UMEN ROUND DJUSTBE PINHOE 3PIN Trim with ET option FOOD Test Report: PT D FPC 120 3PIN ET umens: 1172 uminaire P: IDE FOOD Test Report: PT D FPC 120 3PIN ET umens: 698 uminaire P: UMEN OUTPUT MUTIPIERS umen K K.83 K.87 CBCP Centerbeam candlepower FC Footcandles at beam center (aim point) FOR HORIZONT IMING NGES MH iming ngle ( = ) iming ngle ( = 3) FOR VERTIC IMING NGES D X In vertical aiming applications, aim point (X) is determined by dividing distance from the wall (D) by the tangent of the desired aim angle () ( for 30, 1.0 for ). Horizontal iming ngles Vertical iming ngles Type Spread CBCP MH FC FC D FC X FC X SP NF F F S. olf Road Des Plaines, I 18 Phone (847) Fax (847) Visit us at Printed in U.S cuity Brands ighting, Inc. Rev. 03/01/17 13 of 32

14 3PING djustable Pinhole, 1 3/4 Test Report: PT D FPC 120 3PING umens: 1320 uminaire P: " 3 7/8" NRRO FOOD Test Report: PT D FPC 120 3PING umens: 1349 uminaire P: ED UNIVERS RECESSED DJUSTBE/DONIGHT/ SH 800//1500/ UMEN ROUND DJUSTBE PINHOE, 1 3/4 3PING Trim FOOD Test Report: PT D FPC 120 3PING umens: 1408 uminaire P: IDE FOOD Test Report: PT D FPC 120 3PING umens: 916 uminaire P: UMEN OUTPUT MUTIPIERS umen K K.83 K.87 CBCP Centerbeam candlepower FC Footcandles at beam center (aim point) FOR HORIZONT IMING NGES MH iming ngle ( = ) iming ngle ( = 3) FOR VERTIC IMING NGES D X In vertical aiming applications, aim point (X) is determined by dividing distance from the wall (D) by the tangent of the desired aim angle () ( for 30, 1.0 for ). Horizontal iming ngles Vertical iming ngles Type Spread CBCP MH FC FC D FC X FC X SP NF F F S. olf Road Des Plaines, I 18 Phone (847) Fax (847) Visit us at Printed in U.S cuity Brands ighting, Inc. Rev. 03/01/17 14 of 32

15 3OV djustable Slot Pinhole Test Report: PT R 12D FPC 120 3OV umens: 1531 uminaire P: " 3 7/8" Type NRRO FOOD Test Report: PT R 24D FPC 120 3OV umens: 1581 uminaire P: UMEN OUTPUT MUTIPIERS umen K K.83 K.87 CBCP Centerbeam candlepower FC Footcandles at beam center (aim point) In vertical aiming applications, aim point (X) is determined by dividing distance from the wall (D) by the tangent of the desired aim angle () ( for 30, 1.0 for ) MH 3 ED UNIVERS RECESSED DJUSTBE/DONIGHT/ SH 800//1500/ UMEN ROUND DJUSTBE SOT PINHOE 3OV Trim FOOD Test Report: PT R 35D FPC 120 3OV umens: 1750 uminaire P: FOR HORIZONT IMING NGES iming ngle ( = ) iming ngle ( = 3) Horizontal iming ngles Spread CBCP MH FC FC D FC X FC X SP NF F F IDE FOOD Test Report: PT R 50D FPC 120 3OV umens: 1400 uminaire P: FOR VERTIC IMING NGES Vertical iming ngles D X S. olf Road Des Plaines, I 18 Phone (847) Fax (847) Visit us at Printed in U.S cuity Brands ighting, Inc. Rev. 03/01/17 15 of 32

16 3DP Parabolic Downlight Trim Test Report #: PT D FPC 120 3DP CS uminaire Spacing Criterion: 0.24 uminaire P: 73 Self-Flanged CNDEPOER VERGE INITI FOOTCNDES Ceiling 80% all 50% Floor 20% ZON UMEN SUMMRY Zone umens %Fixture ED UNIVERS RECESSED DJUSTBE/DONIGHT/ SH 800//1500/ UMEN ROUND PRBOIC DONIGHT TRIM 3DP Trim INITI FOOTCNDES (One Unit, 26.1, 13.8 ) (Feet) Center uminance NRRO FOOD Test Report #: PT D FPC 120 3DP CS uminaire Spacing Criterion: 0.40 uminaire P: CNDEPOER VERGE INITI FOOTCNDES Ceiling 80% all 50% Floor 20% ZON UMEN SUMMRY Zone umens %Fixture INITI FOOTCNDES (One Unit, 26.2, 23.4 ) (Feet) Center uminance Fixtures tested to IES recommended standard for solid state lighting per M Photometric performance on a single unit represents a baseline of performance for the fixture. Results may vary in the field. Photometry is at K CCT, 80CRI. UMEN OUTPUT MUTIPIERS umen K K.83 K S. olf Road Des Plaines, I 18 Phone (847) Fax (847) Visit us at Printed in U.S cuity Brands ighting, Inc. Rev. 03/01/17 16 of 32

17 3DP Parabolic Downlight Trim FOOD Test Report #: PT D FPC 120 3DP CS uminaire Spacing Criterion: 0.60 uminaire P: 72 Self-Flanged CNDEPOER VERGE INITI FOOTCNDES Ceiling 80% all 50% Floor 20% ZON UMEN SUMMRY Zone umens %Fixture ED UNIVERS RECESSED DJUSTBE/DONIGHT/ SH 800//1500/ UMEN ROUND PRBOIC DONIGHT TRIM 3DP Trim (continued) INITI FOOTCNDES (One Unit, 26.2, 36.6 ) (Feet) Center uminance IDE FOOD Test Report #: PT D FPC 120 3DP CS uminaire Spacing Criterion: 0.68 uminaire P: CNDEPOER VERGE INITI FOOTCNDES Ceiling 80% all 50% Floor 20% ZON UMEN SUMMRY Zone umens %Fixture INITI FOOTCNDES (One Unit, 26.2, 42.7 ) (Feet) Center uminance Fixtures tested to IES recommended standard for solid state lighting per M Photometric performance on a single unit represents a baseline of performance for the fixture. Results may vary in the field. Photometry is at K CCT, 80CRI. UMEN OUTPUT MUTIPIERS umen K K.83 K S. olf Road Des Plaines, I 18 Phone (847) Fax (847) Visit us at Printed in U.S cuity Brands ighting, Inc. Rev. 03/01/17 17 of 32

18 3DP Parabolic Downlight Trim Test Report #: PT D FPC 120 3DP CS ET uminaire Spacing Criterion: 0.32 uminaire P: 68 Self-Flanged CNDEPOER VERGE INITI FOOTCNDES Ceiling 80% all 50% Floor 20% ZON UMEN SUMMRY Zone umens %Fixture ED UNIVERS RECESSED DJUSTBE/DONIGHT/ SH 800//1500/ UMEN ROUND PRBOIC DONIGHT TRIM 3DP Trim with ET option INITI FOOTCNDES (One Unit, 26.2, 18.4 ) (Feet) Center uminance NRRO FOOD Test Report #: PT D FPC 120 3DP CS ET uminaire Spacing Criterion: 0.46 uminaire P: CNDEPOER VERGE INITI FOOTCNDES Ceiling 80% all 50% Floor 20% ZON UMEN SUMMRY Zone umens %Fixture INITI FOOTCNDES (One Unit, 26.2, 26.3 ) (Feet) Center uminance Fixtures tested to IES recommended standard for solid state lighting per M Photometric performance on a single unit represents a baseline of performance for the fixture. Results may vary in the field. Photometry is at K CCT, 80CRI. UMEN OUTPUT MUTIPIERS umen K K.83 K S. olf Road Des Plaines, I 18 Phone (847) Fax (847) Visit us at Printed in U.S cuity Brands ighting, Inc. Rev. 03/01/17 18 of 32

19 3DP Parabolic Downlight Trim Self-Flanged FOOD Test Report #: PT D FPC 120 3DP CS ET uminaire Spacing Criterion: 0.62 uminaire P: 71 CNDEPOER ED UNIVERS RECESSED DJUSTBE/DONIGHT/ SH 800//1500/ UMEN ROUND PRBOIC DONIGHT TRIM 3DP Trim with ET option (continued) VERGE INITI FOOTCNDES Ceiling 80% all 50% Floor 20% ZON UMEN SUMMRY Zone umens %Fixture INITI FOOTCNDES (One Unit, 26.2, 37.8 ) (Feet) Center uminance IDE FOOD Test Report #: PT D FPC 120 3DP CS ET uminaire Spacing Criterion: 0.76 uminaire P: CNDEPOER VERGE INITI FOOTCNDES Ceiling 80% all 50% Floor 20% ZON UMEN SUMMRY Zone umens %Fixture INITI FOOTCNDES (One Unit, 26.1, 48.1 ) (Feet) Center uminance Fixtures tested to IES recommended standard for solid state lighting per M Photometric performance on a single unit represents a baseline of performance for the fixture. Results may vary in the field. Photometry is at K CCT, 80CRI. UMEN OUTPUT MUTIPIERS umen K K.83 K S. olf Road Des Plaines, I 18 Phone (847) Fax (847) Visit us at Printed in U.S cuity Brands ighting, Inc. Rev. 03/01/17 19 of 32

20 3DH Hyperbolic Downlight Trim Self-Flanged Test Report #: PT D FPC 120 with 3DH CD trim uminaire Spacing Criterion: 0.28 uminaire P: CNDEPOER VERGE INITI FOOTCNDES Ceiling 80% all 50% Floor 20% ZON UMEN SUMMRY Zone umens %Fixture ED UNIVERS RECESSED DJUSTBE/DONIGHT/ SH 800//1500/ UMEN ROUND HYPERBOIC DONIGHT TRIM 3DH Trim INITI FOOTCNDES (One Unit, 26.2, 15.3 ) (Feet) Center uminance NRRO FOOD Test Report #: PT D FPC 120 with 3DH CD trim uminaire Spacing Criterion: 0.46 uminaire P: CNDEPOER VERGE INITI FOOTCNDES Ceiling 80% all 50% Floor 20% ZON UMEN SUMMRY Zone umens %Fixture INITI FOOTCNDES (One Unit, 26.2, 26.5 ) (Feet) Center uminance Fixtures tested to IES recommended standard for solid state lighting per M Photometric performance on a single unit represents a baseline of performance for the fixture. Results may vary in the field. Photometry is at K CCT, 80CRI. UMEN OUTPUT MUTIPIERS umen K K.83 K S. olf Road Des Plaines, I 18 Phone (847) Fax (847) Visit us at Printed in U.S cuity Brands ighting, Inc. Rev. 03/01/17 20 of 32

21 3DH Hyperbolic Downlight Trim Self-Flanged FOOD Test Report #: PT D FPC 120 with 3DH CD trim uminaire Spacing Criterion: 0.64 uminaire P: 75 CNDEPOER VERGE INITI FOOTCNDES Ceiling 80% all 50% Floor 20% ZON UMEN SUMMRY Zone umens %Fixture ED UNIVERS RECESSED DJUSTBE/DONIGHT/ SH 800//1500/ UMEN ROUND HYPERBOIC DONIGHT TRIM 3DH Trim (continued) INITI FOOTCNDES (One Unit, 26.2, 38.7 ) (Feet) Center uminance IDE FOOD Test Report #: PT D FPC 120 with 3DH CD trim uminaire Spacing Criterion: 0.84 uminaire P: CNDEPOER VERGE INITI FOOTCNDES Ceiling 80% all 50% Floor 20% ZON UMEN SUMMRY Zone umens %Fixture INITI FOOTCNDES (One Unit, 26.1, 52.5 ) (Feet) Center uminance Fixtures tested to IES recommended standard for solid state lighting per M Photometric performance on a single unit represents a baseline of performance for the fixture. Results may vary in the field. Photometry is at K CCT, 80CRI. UMEN OUTPUT MUTIPIERS umen K K.83 K S. olf Road Des Plaines, I 18 Phone (847) Fax (847) Visit us at Printed in U.S cuity Brands ighting, Inc. Rev. 03/01/17 21 of 32