MXG2DSTL 3.5 MX G2 LED Square Trimless Lensed Downlight - Wet Location
|
|
|
- Buddy Shaw
- 5 years ago
- Views:
Transcription
1 MXG2DSTL 3.5 MX G2 LED Square Trimless Lensed Downlight - Wet Location ELECTRICAL DATA LED Light Engine System Wattage * CCT / CRI Delivered Lumens ** Lumens Per Watt 1 1/2 L0 L1 L2 L3 10W 16W 20W 26W * System Wattage includes driver and LED Module consumption. ** Delivered lumens will vary depending on trim, CCT, CRI, optic and ceiling thickness 700lm 1000lm 1150lm 1700lm (1 1/2 Regress with Lens) 3 1/2 FEATURES Multiple architectural trim options High center beam spot up to 20,800 CBCP Field changeable optics: 9, 12, 24, 36, 5 92 CRI & 82 CRI in 2700K, 3000K, 3500K and 4100K with 2SDCM binning 50,000 hours L70 (rated life at 70% output) ELECTRICAL SYSTEM Multiple dimming drivers available input; Power factor >.9, 50/60Hz This product complies with IEEE C62.41 for surge endurance up to 2.5KV. Additional surge protection recommended. Damage from power surge is not covered by warranty. HOUSING Heavy duty black powder coated 18 gauge steel frame. Standard plaster frame accommodates 5/8 ceiling thickness. Extended collar options available for ceilings up to 1" or 2" thick, must specify either EC1 or EC2. INSTALLATION Housing types include IC Air-Tight, CCEA (Chicago Plenum), or Non-IC Rated (must specify). Non-IC rated housings must be kept at a minimum of 3 away from insulation. Butterfly brackets are compatible with adjustable bar hangers (14-25 ) and EMT. Bar hangers must be ordered separately. Max. ambient temperature: 131 F (5C). TRIM SPECIFICATION High quality trims are die-cast using A380 aluminum with durable powder coat available in multiple finishes. Perforated mesh frame is die-cast to a 0.8mm thickness to easily adhere to joint compound for seamless and trimless mounting. Trim is available with solite, clear tempered or frosted lens, must specify. Trims available in 1 1/2 regress for greater visual comfort or 1/2 regress for consistent look throughout space. EMERGENCY BACKUP Remote test switch included. External battery operates LED load at a minimum of 400 to 650 lumens for 90 minutes, depending on backup wattage selected. See trim multipliers for detailed performance. Servicing requires above ceiling access. LISTING / WARRANTY 5-Year Intense LED Limited Warranty ETL listed to US and Canadian standards for wet locations (-IC/CP Only) Air-Tight Certified ASTM E283 (-IC/CP Only) ETL listed for direct contact w/insulation (-CP Only) CCEA Chicago Plenum ENERGY STAR Qualified 1 Can be used to comply with 2016 Title 24-Part 6 High Efficacy LED Light Source Requirements (1/2 Regress with Lens) 1/2 Housing Dimensions Are On Page 2 3 1/2 Available Trim Finishes Black White Satin Nickel Antique Bronze Wheat Housing Part Number (Example: MXG2DSTL-ICL1) Housing Installation Type Ceiling Thickness Wattage Dimming Voltage Options MXG2DSTL Trim Part Number (Example: WL13024-SL) Trim Finish Wattage CCT / CRI Optic Lens (1 1/2 Regress) (1/2 Regress) -NC -IC -CP (Non-IC) (Air-Tight IC) (Chicago Plenum) B (Black) W (White) SN (Satin Nickel) AB (Antique Bronze) WH (Wheat) blank EC1 EC2 (5/8 ) (1 ) (2 ) L0 (10W) L1 (16W) L2 (20W) L3 3 (26W) L0 L1 L2 L (10W) (16W (20W) (26W) blank (Non-Dimming) DELV 4 (Phase Dimming) D101 (0-10V Dimming 1%) ED10V1 5 (eldoled 0-10V 1%) ED10V01 5 (eldoled 0-10V 0.1%) LUT1 (Lutron Hi-Lume 1%) LUT (Lutron EcoSystem 1%) EDALI1 5 (eldoled DALI 1%) EDALI01 5 (eldoled DALI 0.1%) DMXR 6 (DMX512 RDM 0.1%) (2700K / 82 CRI) (2700K / 92 CRI) () (3000K / 92 CRI) (3500K / 82 CRI) (3500K / 92 CRI) (4100K / 82 CRI) (4100K / 92 CRI) (9 Narrow Spot) (12 Spot) (24 Narrow Flood) (36 Flood) (5 Wide Flood) blank (120V) 27 (277V) -SL (Solite) -CR (Clear Tempered) -FR (Frosted) I100 (C-Channel Bar Hangers) I200 (Flat Bar Hangers) I400 (Wood Joist Bar Hangers) EM7 7 (7W Emergency Backup IOTA Part #ILB-CP07-A) EM12 7,8 (12W Emergency Backup IOTA Part #ILB-CP12-A) Notes: 1. ENERGY STAR Qualified (White reflectors only; Excludes: L2, L3, 92 CRI & 9 options) 2. L0 only; Excludes: 82 CRI & 9 options 3. L3 available with Non-IC housings only 4. Available in 120V only 5. Available in L0, L1 & L2 only 6. DMX512 RDM not available in L0 & L1 7. Access above ceiling required 8. Not available in L Narrow spot not available in L2 & L3 MX DOWNLIGHTING L/M-128:17 P-53
2 MXG2DSTL 3.5 MX G2 LED Square Trimless Lensed Downlight - Wet Location NON-IC & AIR TIGHT IC DIMENSIONS 5 3/8 7 3/4 Plaster Frame Accommodation Collar Type Standard EC1 EC2 Ceiling Cut Out: 4 1/8 4 1/4 5/8 Standard EC1 = 1 EC2 = 2 Max Ceiling Thickness Up-to 5/8 Up-to 1 Up-to 2 CCEA CHICAGO PLENUM DIMENSIONS 7 1/4 7 3/4 Plaster Frame Accommodation Collar Type Standard EC1 EC2 Max Ceiling Thickness Up-to 5/8 Up-to 1 Up-to 2 Ceiling Cut Out: 4 1/8 4 1/4 5/8 Standard EC1 = 1 EC2 = 2 OPTICS REPLACEMENT 1. Rotate release cap by turning counter clockwise. 2. Install accessories into accessory holder and replace accessory holder s retaining clip. 3. Place accessory holder and accessory flush against optic and replace release cap. Optics IP-OP4712 (12 Spot) IP-OP4724 (24 Narrow Flood) IP-OP4736 (36 Flood) IP-OP4750 (5 Wide Flood) Optic Retainer ring Release cap MX DOWNLIGHTING L/M-128:17 P-54
3 WL0-CR 12 Spot (12) 24 Narrow Flood (24) 5 Wide Flood (50) Report #: ILL (12) ILL (24) ILL (36) ILL (50) 291fc fc fc fc 6.3 7W Emergency (x 0.70) Lumens: 613 LPW: fc 105fc 72.8fc Lumens: 707 LPW: 71 Degree fc 46.4fc 32.2fc CBCP Lumens: 714 LPW: fc 17.1fc 11.9fc Lumens: 644 LPW: fc 7.2fc 5fc WL1-CR 12 Spot (12) 24 Narrow Flood (24) 5 Wide Flood (50) Report #: ILL (12) ILL (24) ILL (36) ILL (50) 408fc fc fc fc 6.3 7W Emergency (x 0.50) 12W Emergency (x 0.85) Watts: 15.5 Lumens: 858 LPW: fc 147fc 102fc Watts: 15.4 Lumens: 989 LPW: fc 65fc 45.1fc Watts: 15.6 Lumens: 1000 LPW: fc 24fc 16.6fc Watts: 15.5 Lumens: 901 LPW: fc 10.1fc 7fc MX DOWNLIGHTING L/M-128:17 P-55
4 WL2-CR 12 Spot (12) 24 Narrow Flood (24) 5 Wide Flood (50) Report #: ILL (12) ILL (24) ILL (36) ILL (50) 478fc fc fc fc 6.3 7W Emergency (x 0.40) 12W Emergency (x 0.68) Watts: 20.5 Lumens: 1005 LPW: fc 172fc 119fc Watts: 20.5 Lumens: 1159 LPW: 57 Degree 3 119fc 76.2fc 52.9fc CBCP Watts: 20.4 Lumens: 1172 LPW: fc 28.1fc 19.5fc Watts: 20.4 Lumens: 1056 LPW: fc 11.8fc 8.2fc WL3-CR 12 Spot (12) 24 Narrow Flood (24) 5 Wide Flood (50) Report #: ILL (12) ILL (24) ILL (36) ILL (50) 578fc fc fc fc 6.3 7W Emergency (x 0.35) 12W Emergency (x 0.59) Watts: 26.2 Lumens: 1226 LPW: fc 208fc 145fc Watts: 26.3 Lumens: 1413 LPW: fc 92.9fc 64.5fc Watts: 26.1 Lumens: 1722 LPW: fc 41.2fc 28.6fc Watts: 26.1 Lumens: 1288 LPW: fc 14.4fc 10fc MX DOWNLIGHTING L/M-128:17 P-56
5 DIMMING COMPATIBILITY 0-10V DIMMING 120V/277V Dims down to 1% or 0.1% light output Consult dimming manufacturer for installation instructions and power packs Manufacturer Part Number(s) HUNT PS-010-IV-120V, PS-010-WH-120V, PS-010-3W-IV-120, PS-010-3W-WH-120V, PS-010-IV-277V, PS-010-WH-277V, PS-010-3W-IV-277V, PS-010-3W-WH-277V, FD-010: PS-IFC-010-IV, PS-IFC-010-WH-120/277V, FD-010: PS-IFC-010-3W-IV, PS-IFC-010-3W-WH-120/277V, FD V, FD V Leviton Leviton Centura Fluorescent Control System, IllumaTech IP7 Series, DPSPE-212 Lightolier ZP600FAM120, MP1500FAM120, V2000FAMU Lithonia LEQ BC, LEQ LVBC, SLD LVBC, SQ1DC Lutron DVTV, NTFTV Synergy ISD BC 120/277 INPUT 0-10V DIMMER VIOLET (+) GREY (-) FORWARD / REVERSE PHASE DIMMING 120V only See chart below for minimum dimming levels Consult dimming manufacturer for installation instructions MX MODULE DIMS DOWN TO Product Part Number(s) Type L0 L1 L2 L3 Leviton IPE04 Reverse 8% 6% 8% 8% Leviton IPI06-1LZ Forward - 1% 1% 1% Leviton 6633-P Forward 1% 1% 1% - Lutron DVELV300P Reverse 8% 6% 9% 9% Lutron DVCL-153P Forward 1% 1% 1% 1% Lutron S600P Forward 3% 1% 2% 2% Cooper DLC03P Forward - 1% 1% 2% Cooper DAL06P Forward - 1% 1% 1% 120V INPUT FROM DIMMER DALI DIMMING Dims down to 1% or 0.1% light output 120 OR 277V INPUT ORANGE (DALI DA) ORANGE/ (DALI DA) DMX512 RDM DIMMING Dims down to 0.1% light output RDM channel programmable 120 OR 277V INPUT ORANGE/ (DMX +) DMX512 IN ORANGE (DMX -) BROWN (DMX GROUND) MX DOWNLIGHTING L/M-128:17 P-65
6 DIMMING COMPATIBILITY LUTRON ECOSYSTEM DIMMING Dims down to 1% Consult dimming manufacturer for installation instructions Product Part Number(s) EcoSystem CS-1L-WM, CS-2L-WM, CS-1L-CM, CS-2L-CM, EcoSystem ESN, Grafik Eye QS with EcoSystem, Quantum ECO SYSTEM CONTROL (BY OTHERS) ECO SYS BUS VIOLET (E1) VIOLET (E2) LUTRON HI-LUME DIMMING Dims down to 1% Consult dimming manufacturer for installation instructions AYF-103P, AYF-103P-277, DVF-103, DVF-103P-277, DVSCF-103P, DVSCF-103P-277, HQRD-F6AN- DV, LXF-103PL, LXF-103PL-277, NF-10, NF-103P, NF-103P-277, NF , NTF-10, NTF-103P, NTF-103P-277, NTF , RRD-F6AN-DV, SF-12P-277-3, SF-103P, MAF-6AM, MAF-6AM-277, MSCF-6AM, MCSF-6AM-277, MRF2-F6AN-DV, SF-10P, SF-12P-277, SPSF-6A, SPSF-6A-277, SPSF-6AM, SPSF-6AM-277, VF-10, VTF-6AM 3-WIRE CONTROL (BY OTHERS) ORANGE MX DOWNLIGHTING L/M-128:17 P-66
MXG2DRTR 3.5 MX G2 LED Lensed Downlight - Wet Location
MXG2DRTR 3.5 MX G2 LED Lensed Downlight - Wet Location ELECTRICAL DATA LED Light Engine System Wattage * CCT / CRI Delivered Lumens ** Lumens Per Watt L0 L1 L2 L3 10W 16W 20W 26W * System Wattage includes
MXG2DRTR 3.5 MX G2 LED Lensed Pinhole - Wet Location
MXG2DRTR 3.5 MX G2 LED Lensed Pinhole - Wet Location ELECTRICAL DATA LED Light Engine System Wattage * CCT / CRI Delivered Lumens ** Lumens Per Watt L0 L1 L2 L3 10W 16W 20W 26W * System Wattage includes
MXG2DSTL 3.5 MX G2 LED Square Trimless Downlight
MXG2DSTL 3.5 MX G2 LED Square Trimless Downlight ELECTRICAL DATA LED Light Engine System Wattage * CCT / CRI Delivered Lumens ** Lumens Per Watt 1 1/2 L0 L1 L2 L3 10W 16W 20W 26W * System Wattage includes
MXG2DRTR 3.5 MX G2 LED Downlight
MXG2DRTR 3.5 MX G2 LED Downlight ELECTRICAL DATA LED Light Engine System Wattage * CCT / CRI Delivered Lumens ** Lumens Per Watt L0 L1 L2 L3 10W 16W 20W 26W * System Wattage includes driver and LED Module
MXG2DSTR 3.5 MX G2 LED Square Downlight
MXG2DSTR 3.5 MX G2 LED Square Downlight ELECTRICAL DATA LED Light Engine System Wattage * CCT / CRI Delivered Lumens ** Lumens Per Watt L0 L1 L2 L3 10W 16W 20W 26W * System Wattage includes driver and
MXG2DSTR 3.5 MX G2 LED Square Downlight Wood Ceiling
MXG2DSTR 3.5 MX G2 LED Square Downlight Wood Ceiling ELECTRICAL DATA Available finishes LED Light Engine System Wattage * CCT / CRI Delivered Lumens ** Lumens Per Watt L0 L1 L2 L3 10W 16W 20W 26W 750lm
MXG2DRTR 3.5 MX G2 LED Wood Ceiling Lensed Pinhole - Wet Location
MXG2DRTR 3.5 MX G2 LED Wood Ceiling Lensed Pinhole - Wet Location ELECTRICAL DATA Available finishes LED Light Engine System Wattage * CCT / CRI Delivered Lumens ** Lumens Per Watt L0 L1 L2 L3 10W 16W
IHOLC4DR 4 Gravity LED Downlight Cylinder
IHOLC4DR 4 Gravity LED Downlight Cylinder ELECTRICAL DATA LED Light Engine Delivered Lumens * System Wattage ** M1 M2 L1 L2 L3 900lm @ 3000K / 82 CRI 1800lm @ 3000K / 82 CRI 2500lm @ 3000K / 82 CRI 3400lm
MXG2PRD 3.5 MX G2 LED Downlight Pendant
MXG2PRD 3.5 MX G2 LED Downlight Pendant ELECTRICAL DATA LED Light Engine System Wattage * CCT / CRI Delivered Lumens ** Lumens Per Watt L0 L1 L2 10W 16W 20W 3000K / 82 CRI 3000K / 82 CRI 3000K / 82 CRI
Installation Instructions MX LED Downlight Remodel
1 of 5 Risk of electrical shock. Disconnect power before servicing or installing luminaire. Risk of injury or damage. Luminaire will fail if not installed properly. Follow installation instructions. Risk
IHOL-6DS / ISD602 6 Gravity LED Square Lensed Downlight - Wet Location
IHOL-6DS / ISD602 6 Gravity LED Square Lensed Downlight - Wet Location ELECTRICAL DATA LED Light Engine System Wattage * CCT / CRI Delivered Lumens ** M1 M2 L1 L2 L3 L4 L5 12W 25W 34W 46W 59W 75W 93W *
3 1 4" x 3 1 4" 4 1 2" x 4 1 2" HEATSINK: Proprietary high performance aluminum die cast heatsink for maximum LED life.
Beve Trimless Downlight PRODUCT INNOVATION AWARDS 211 PLATINUM WINNER MOST UNIQUE PRODUCT WINNER 331 1" Regress LUMINAIRE INFORMATION APPLICATION: Accent luminaire for Residential, Commercial, Retail or
SS6G2 / IC630 6 Architectural LED Round Generation 2 / Open Reflector
SSG2 / I3 rchitectural LED Round Generation 2 / Open JO NME TLOG NUMER DEORTIVE 7 /2 7 5/ 2 3/4 ut-out: /2 3 /2 Order Matrix Example: SSG2238-27-EM SSG2 5 2 3 D E 278 38 358 48 LED Recessed Round Module
ICL-LEDG2-2 MB G2 Recessed Multiple (2) Head - Gen 2
I-EG2-2 MB G2 Recessed Multiple (2) Head - Gen 2 JOB ATAOG EETRIA ATA E ight Engine attage 1 T / RI Nominal elivered umens 2, 3 1 2 3 4 10 14 20 29 1 System attage includes driver and E Module consumption
MXG2SRTR1 MX G2 Semi Recessed Multiple (1) Head with New Construction Frame-In
MXG2SRTR1 MX G2 Semi Recessed Multiple (1) Head with New onstruction Frame-In ATAOG EETRIA ATA E ight Engine System attage * T / RI elivered umens ** umens Per att 0 1 2 10 16 20 / 82 RI / 82 RI / 82 RI
L4B-F-RF Round Fixed Frame In BRO
DESIGNED & ASSEMBLED IN CANADA L4B-F-RF Round Fixed Frame In BRO The L4B-F series is designed for non insulated ceilings. A 20 Ga. Black powder coated steel baseplate is designed for bidirectional mounting
Architectural grade at an affordable price. 3 DOWNLIGHTS NDLED RABWEB.COM
Architectural grade at an affordable price. NDLED DOWNLIGHTS RABWEB.COM 888-722-1000 3-in-1 housing. One-of-a-kind downlight. The NDLED housing delivers innovative design flexibility. Now you can install
OneFrame & DRD2X Apex Series Recessed LED Downlight General New Construction DRDHNJD Deep Junction Box
PRODUCT SPECIFICATIONS Sound rated, architectural recessed LED downlight, 120/277V High performance Apex Series DRD2 Architectural-grade illumination produces up to 4000 candelas of focused light Precise,
MXS Matrix Small BRO
DESIGNED & ASSEMBLED IN CANADA MXS Matrix Small BRO The Matrix family of recessed multiples throws powerful illumination to direct occupant focus. To aid in setting the scene, each lamp head rests in a
WARM COLOR DIMMING ARTIST SERIES 21º º º º - N/A 43º - N/A 60º K, 3000K or 3500K*** 3000K-1800K Warm Dim
Small aperture LED downlight with architectural appearance, featuring ELEMENT's unique patented high-low lamp positioning feature. The innovative design allows the LED to be positioned closer to the aperture
OneFrame & DRD4 Adjustable Recessed LED Downlight Concrete Tight New Construction DRDHNJC Deep Junction Box
PRODUCT SPECIFICATIONS Frame-in Kit JUNCTION BOX: Metallic outlet box certified UL514A up to 2 hour fire rating. Equipped with (4) trade size concentric knockouts ( 3 /4 + 1 /2 ) to allow straight conduit
DCD2 Recessed LED Downlight Commercial New Construction 4", 6", 8" Aperture
PRODUCT SPECIFICATIONS Frame-in Kit MOUNTING FRAME: Die-cast aluminum. JUNCTION BOX: Galvanized steel. Equipped with (4) /2" and (2) 3 /4" knockouts with pryout slots to allow straight conduit runs. Approved
DCCX. Apex Series LED Cylinder JA8. Surface, Cord, Stem, Wall Mount. Product Code: Spec Sheet V
Project: Product Code: Type: Date: Spec Sheet V- 08.20.8 Apex Series DCCX delivers vivid, accurate light in the form of a completely customizable cylinder Powered by the high-performance DRD2X module for
MXS Trimless Matrix Small XTM
MXS Trimless Matrix Small XTM FEATURES A DETAILS Trim Class: 4" Category: Recessed Trimless Multiple Shape: Rectangle Adjustability: Aiming WIth Rotation MXS-Trimless-Matrix-Small-XTM-Specs Subject to
OneFrame & DRD2 Recessed LED Downlight General New Construction DRDHNJD Deep Junction Box
PRODUCT SPECIFICATIONS Frame-in Kit JUNCTION BOX: Metallic outlet box certified UL514A up to 2 hour fire rating. DRDHNJD equipped with (8) trade size knockouts (four concentric side ( 3 /4" + 1 /2"), two
OneFrame & DRD2 Recessed LED Downlight General New Construction DRDHNJD Deep Junction Box
PRODUCT SPECIFICATIONS Sound rated, architectural recessed LED downlight, 120/277V Twist & Lock feature for easy trim installation 750 & 1000 lumen outputs, powered by Cree 93+ CRI LEDs 2700K, 3000K, 3500K,
DRD2 Recessed LED Downlight Commercial New Construction 4", 6", 8" Aperture
PRODUCT SPECIFICATIONS Frame-in Kit MOUNTING FRAME: Die-cast aluminum. JUNCTION BOX: Galvanized steel. Equipped with (4) /2" and (2) 3 /4" knockouts with pryout slots to allow straight conduit runs. Approved
D4B-F-R 3 Series Round Frame In BRO
DESIGNED & ASSEMBLED IN CANADA D4B-F-R 3 Series Round Frame In BRO The D4B-F-R series is designed for non insulated ceilings. A unique design allows installation of very shallow plenums as low as 5" (when
1 Eco-Downlight IC Air-Tight Adjustable New Construction Housing Round or Square
Eco-Downlight Wattage CCT Delivered Lumens Efficacy 8.5W 8.5W 13W 13W 13W 2700K 3000K 2700K 3000K 3500K 750lm 800lm 950lm 1050lm 1150lm Lumens will vary depending on optic, finish & trim type 88lpw 94lpw
Classic Frame & DRD2X Apex Series Recessed LED Downlight Commercial Remodel 6", 8" Aperture
PRODUCT SPECIFICATIONS Frame-in Kit MOUNTING FRAME: Die-formed sheet metal. JUNCTION BOX: Galvanized steel. Equipped with (4) /2" and (2) 3 /4" knockouts with pryout slots to allow straight conduit runs.
DCCX Apex Series Commercial LED Cylinder Surface, Cord, Stem, Wall Mount
PRODUCT SPECIFICATIONS Apex Series DCCX delivers vivid, accurate light in the form of a completely customizable cylinder Powered by the high-performance DRD2X module for a precise, targeted beam of low
Fahrenheit DRD3 Adjustable LED Downlight Fire and Sound-Rated New Construction 4, 5, 6 Aperture
PRODUCT SPECIFICATIONS Frame-in Kit HOUSING: Fire and sound-rated housing. Up to 20 minute fire rated L500 (floor-ceiling) & P500 (roof-ceiling) design. Die formed #24 gauge galvanized steel construction.
DCD1 Recessed LED Downlight Commercial New Construction 4, 6, 8 Aperture
PRODUCT SPECIFICATIONS Frame-in Kit MOUNTING FRAME: Die-cast aluminum. JUNCTION BOX: Galvanized steel. Equipped with (4) 1 /2 and (2) 3 /4 knockouts with pryout slots to allow straight conduit runs. Approved
4" LED SPECIFICATIONS LOW-PROFILE ADJUSTABLE DOWNLIGHT
LED This specification grade low-profile adjustable LED downlight delivers high performance for ultra-shallow ceiling plenum installations while maintaining a beautiful architectural ceiling appearance.
PRIME PRIME 4 LED ARCHITECTURAL ROUND FLANGED DOWNLIGHT
TYPE: USE OF PRODUCT The 4" Prime Downlight Series is the ideal product for architectural energy efficient lighting in commercial and residential applications. Available in an assortment of color temperatures,
CITIZEN CITIZEN WARM DIM XICATO MAX OUTPUT HIGH OUTPUT LOW OUTPUT HIGH OUTPUT LOW OUTPUT STANDARD SERIES ARTIST SERIES
LED This specification grade LED downlight offers high performance with an architectural ceiling appearance. This specification grade LED downlight offers a wide selection of LED module options to address
DCCX. Apex Series LED Cylinder JA8. Surface, Cord, Stem, Wall Mount
Project: Product Code: Type: Date: Spec Sheet V- 2.0.8 Apex Series delivers vivid, accurate light in the form of a completely customizable cylinder Powered by the high-performance DRD2X module for a precise,
Cylindrix III. Recessed Multiples
Features Cylindrix III Recessed LED, the best combination of optical and thermal performance, aesthetics and visual comfort in an recessed accent. Features a deeply recessed single LED light source for
Cylindrix III. Recessed Multiples
Features Cylindrix III Recessed LED, the best combination of optical and thermal performance, aesthetics and visual comfort in an recessed accent. Features a deeply recessed single LED light source for
DRD3 Adjustable Recessed LED Downlight General New Construction 4, 5, 6 Aperture
PRODUCT SPECIFICATIONS 360 directional aim with up to 40 adjustable tilt Maximum installation compatibility Twist & Lock feature for easy trim installation 750 & 000 lumen outputs 2700K, 3000K, 3500K,
Aperture. Color Quality. 90+ CRI, 2-step SDCM. 2700K 3000K 3500K 4000K Spot (20 ) Narrow Flood (30 ) Flood (40 ) 4000cd (Spot 750 lm) Dimming
Project: Product Code: Type: Date: Spec Sheet V- 10.31.18 With multiple ratings, OneFrame is compliant in a wide range of situations Thanks to a unique low profile and small aperture design, OneFrame can
3" LED SPECIFICATIONS ULTRA SHALLOW FIXED DOWNLIGHT
Small aperture LED downlight with architectural appearance housed in an ultra-shallow " above the ceiling housing. LED module and optics are modular for ease of replacement. Wood ceiling option allows
L10 - L40: 5-3/4 L50 - L60: 6-1/ K K K F OF 1/2. 65 Open. CG Champagne gold anodize for shower. 45 Open
CATALOG #: - : 5-3/4 - : 6-1/2 TYPE: ø4-1/2 ø5-1/2 PROJECT: NEW CONSTRUCTION AND REMODEL FEATURES Williams TrimLock reflector retention system eliminates trim sag Die cast trim choices include flush, regressed
Essenza. Round Downlights
Downlight Adjustable Product Overview Features Essenza LED Downlights are designed to deliver the features required for your Hotel and Residential High Rise or Commercial projects. Available with 12W or
L10 - L40: 6-5/8 L50 - L60: 7-3/ K K K K. EM/10W 10-watt emergency battery [4] TrimLock.
![L10 - L40: 6-5/8 L50 - L60: 7-3/ K K K K. EM/10W 10-watt emergency battery [4] TrimLock.](/thumbs/95/124178661.jpg "L10 - L40: 6-5/8 L50 - L60: 7-3/ K K K K. EM/10W 10-watt emergency battery [4] TrimLock.")
CATALOG #: - : 6-5/8 - : 7-3/8 TYPE: ø6 ø7 PROJECT: FEATURES Williams TrimLock reflector retention system eliminates trim sag Beam angles ranging from 1 narrow to 65º wide for tailored performance Open
L10 - L40: 6-5/8 L50 - L60: 7-3/ K K K F. 65 Open. SPC Clear specular anodize for shower
CATALOG #: - : 6-5/8 - : 7-3/8 TYPE: ø6 ø7 PROJECT: NEW CONSTRUCTION AND REMODEL FEATURES Williams TrimLock reflector retention system eliminates trim sag Industry-leading efficacies as high as 116 lm/w
DRD2X & OneFrame Concrete Apex Series Recessed LED Downlight
DRD2X & OneFrame Concrete Project: Product Code: Type: Date: Spec Sheet V- 10.31.18 Designed for high rise structures that require steel and concrete for reinforcement Features spot-welded areas and adaptations
DRD2 Recessed LED Downlight General Remodel 4", 5", 6" Aperture
PRODUCT SPECIFICATIONS Frame-in Kit HOUSING: Die-formed steel with powder coat finish (4" frame-in kit, 4" shallow frame-in kit), 20 ga. die-formed aluminum (5" frame-in kit), 22 ga. die-formed aluminum
6DS 6 Downlight Square
CATALOG #: L7 - L13: 5-7/8 L21: 7-3/8 6 TYPE: PROJECT: NEW CONSTRUCTION AND REMODEL FEATURES Dim to warm from 1800K to 3000K CCT, minimum 95 CRI Beam angles ranging from 25º narrow to 65º wide for tailored
Installation Instructions MX LED Enhanced Color Adjustable
Installation Instructions 1 of 5 MX Enhanced Color Adjustable Risk of electrical shock. Disconnect power before servicing or installing luminaire. Risk of injury or damage. will fail if not installed properly.
4DS 4.5 Downlight Square
CATALOG #: - : 5 : 6-1/2 4-1/2 5-1/2 TYPE: PROJECT: NEW CONSTRUCTION AND REMODEL FEATURES Dim to warm from 1800K to 3000K CCT, minimum 95 CRI 4 inch aperture is unobtrusive in small scale spaces Square
DCC2 LED Cylinder Surface, Cord, Stem, Wall Mount
PRODUCT SPECIFICATIONS Surface, Cord, Stem or Wall mounting options Available in White, Black, Bronze, Brushed Aluminum or Custom Color finishes Decorative frosted trim available 750, 000, 500 or 2000
PROJECT INFORMATION PROJECT
SURFACE PROJECT INFORMATION PROJECT SURFACE DATE TYPE NanoLED Cylinder - Available in 2 wattage/lumen packages with maximum delivered lumens of over 1100 at 20W (57LPW). The NanoLED cylinder provides maximum
PROJECT INFORMATION DELIVERED PERFORMANCE. 14 Watts 20 Watts DOWNLIGHT. Performance based on 3000K. DELIVERED PERFORMANCE (Projected)
Beve mini Covered By US Patents 8,684,570 and 9,671,091 PROJECT INFORMATION PROJECT DATE TYPE 2221 DOWNLIGHT Beve mini Recessed Downlight - Good things come in small packages. Beve mini is the smallest
DCC2. LED Cylinder JA8. Surface, Cord, Stem, Wall Mount
Project: Product Code: Type: Date: Spec Sheet V- 2.0.8 The cylinder s combination of precise illumination and refined aesthetics can take your designs to new heights Available in a range of form factors,
2" LED SPECIFICATIONS ADJUSTABLE DOWNLIGHT & WALL WASH
" LED The ELEMENT " adjustable downlight boasts a." aperture and.75" ceiling cutout. Newly developed aiming/locking mechanism offers -5º tilt, 3º rotation, and ELEMENT's patented high-low lamp positioning.
OneFrame & DRD2 Recessed LED Downlight Concrete Tight New Construction DRDHNJC Deep Junction Box
PRODUCT SPECIFICATIONS Frame-in Kit JUNCTION BOX: Equipped with (4) trade size concentric knockouts ( 3 /4 + 1 /2 ) to allow straight conduit runs. Approved for 8 (four in, four out) #12 AWG C. MOUNTING:
1 1 / 4 13 / 16 45º ORDERING INFORMATION: 0-10V v dimming CP - Chicago plenum EM** - emergency battery pack (1 head)
SEMI-RECESSED TRIMLESS MULTIPLE 3 LIGHT 3LT APPLICATION: Accent and display lighting for retail, commercial and hospitality environments CONSTRUCTION: Stamped steel mounting frame with integral mounting
ID+ 3.5" x 3.5" 60 cut-off reflector. 50 cut-off reflector. Less than 2.64" low profile housing available.
clear diffuse warm diffuse black flange titanium silver flange die-cast black die-cast white trimless companion DIMENSIONAL DATA 6 cut-off reflector 12.88" 327.2mm FEATURES Less than 2.64" low profile
DRD5S Surface Mount LED Downlight General Retrofit Junction Box
PRODUCT SPECIFICATIONS Light Engine LED: Optimized LED array delivers smooth, uniform illumination with no visible fasteners or dark spots. LUMEN OUTPUT (POWER): 750 Im (9.0W), 1000 lm (12.0W). SHAPE:
Essenza. Dim-To-Warm Round Downlights
Dim-To-arm Round Downlights Downlight Adjustable Product Overview Features Add ambiance to any hospitality, residential, retail or commercial space. Amerlux Essenza Downlight Dim-To-arm option offers a
Cylindrix III Mini. Pendant Multiples
Cylindrix III Mini Pendant Multiples 2 Light Pendant Straight Multiple Product Overview Features Cylindrix III Mini Pendant Multiples perform beautifully, punching through higher ambient light with strong
DRD2 Recessed LED Downlight General New Construction Junction Box PRODUCT SPECIFICATIONS
PRODUCT SPECIFICATIONS Frame-in Kit JUNCTION BOX: Metallic outlet box certified UL514A up to 2 hour fire rating. Equipped with (4) 1 /2" trade size knockouts (two side, two top) to allow straight conduit
DRDHNJ Recessed LED Downlight General New Construction Junction Box
PRODUCT SPECIFICATIONS Frame-in Kit JUNCTION BOX: Metallic outlet box certified UL514A up to 2 hour fire rating. Equipped with (4) 1 /2 trade size knockouts (two side, two top) to allow straight conduit
Cylindrix III Mini. Pendant Multiples
Cylindrix III Mini Pendant Multiples 2 Light Pendant Straight Multiple Product Overview Features Cylindrix III Mini Pendant Multiples perform beautifully, punching through higher ambient light with strong
Installation Instructions 4 Gravity Enhanced Color Adjustable
Installation Instructions 1 of 5 Risk of electrical shock. Disconnect power before servicing or installing luminaire. Risk of injury or damage. will fail if not installed properly. Follow installation
DRD5S & SurfaceFrame. Surface Mount LED Downlight JA8. New Construction. DRDHNJO Octagonal Junction Box
New Construction Project: Product Code: Type: Date: Spec Sheet V- 11.15.18 Features multiple ratings to meet the demands of a wide range of situations Ultra-low profile allows it to install in as little
DCC2 LED Cylinder Surface, Cord, Stem, Wall Mount
PRODUCT SPECIFICATIONS Luminaire LED: Tightly binned, high performing white Cree LED. LUMEN OUTPUT (POWER): 750 Im (.8W), 000 lm (4.7W), 500 lm (9.5W), 2000 lm (29.0W), 2 x 750 lm (23.6W), 2 x 000 lm (29.4W),
Designed to roll with the changes. Affordability and versatility make HALITETM. the modular downlight that adapts to you.
Designed to roll with the changes. Affordability and versatility make HALITETM the modular downlight that adapts to you. HALITETM Modular is putting it mildly. HALITE was designed to be both easily customized
40º 14 1 / Plaster Frame 6. Plaster Skim Coat (by others) ORDERING INFORMATION:
RECESSED TRIMLESS MULTIPLE 3 LIGHT 3LT APPLICATION: Accent and display lighting for retail, commercial and hospitality environments CONSTRUCTION: Stamped steel mounting frame w/integral mounting bars Steel
DRD2 & SurfaceFrame. Shallow Recessed LED Downlight JA8. New Construction. DRDHNJO Octagonal Junction Box
Project: Product Code: Type: Date: Spec Sheet V- 11.15.18 Features multiple ratings to meet the demands of a wide range of situations Ultra-low profile allows it to install in as little as 2" of ceiling
DRD5S. Surface Mount LED Downlight JA8. Retrofit Junction Box
Project: Product Code: Type: Date: Spec Sheet V- 11.15.18 Thinnest-in-class delivers the pure, smooth light and the elegant look of a high-end recessed downlight Extends just 0.6 inches below the ceiling
4DS 4.5 Downlight Square
CATALOG #: 4-1/2 5-1/2 TYPE: PROJECT: NEW CONSTRUCTION AND REMODEL FEATURES Tunable white from 2700K to 5000K CCT, minimum 80 CRI 4 inch aperture is unobtrusive in small scale spaces Square shape accentuates
MEDMASTER DOWNLIGHT Luminaires for Surgical Applications
PRODUCT FEATURES: 6" sealed, recessed downlight with regressed or flush lens trim Conducted emissions controlled as per MIL-STD-461F Delivered lumens: 794-5,543 lm 1% Dimming via 0-10V, DALI or EcoSystem
4DR 4.5 Downlight Round
CATALOG #: - : 5-3/4 : 6-1/2 ø4-1/2 ø5-1/2 TYPE: PROJECT: NEW CONSTRUCTION AND REMODEL FEATURES Innovative TrimLock reflector retention system ensures trim remains flush with ceiling plane Dim to warm
2" LED SPECIFICATIONS ADJUSTABLE DOWNLIGHT & WALL WASH
The ELEMENT " adjustable downlight boasts a.4" aperture and.75" ceiling cutout. Unique aiming/locking mechanism offers -45º tilt, 36º rotation, and ELEMENT's patented high-low lamp positioning. Flanged
MOUNTING: Swing out lugs permit from below mounting into ceiling up to 1 1/2 (38 mm) thick LABELING: Approved to UL standards as tested by CSA
2LT APPLICATION: Accent and display lighting for retail, commercial and supermarket environments CONSTRUCTION: Steel driver housing Steel upper housing and laser cut trim ring Complete die-cast optical
6DR 6 Downlight Round
- : 6-5/8 : 7-3/8 CATALOG #: ø6 ø7 TYPE: PROJECT: NEW CONSTRUCTION AND REMODEL FEATURES Innovative TrimLock reflector retention system ensures trim remains flush with ceiling plane Dim to warm from 1800K
MOUNTING: Swing out lugs permit from below mounting into ceiling up to 1 1/2 (38 mm) thick LABELING: Approved to UL standards as tested by CSA
MULTIPLE RECESSED REMODELER 3 LIGHT 3LT APPLICATION: Accent and display lighting for retail, commercial and supermarket environments CONSTRUCTION: Steel driver housing Steel upper housing and laser cut
id + 4.5" x 4.5" Downlight mm Trim ChromaSure: Color consistency resulting in a 2-step MacAdam ellipse across the entire ID+ product line.
white flange black flange titanium silver flange clear diffuse warm diffuse DIMENSIONAL DATA Downlight 12.21 31.1mm FEATURES ChromaSure: Color consistency resulting in a 2-step MacAdam ellipse across the
DCC2 LED Cylinder Surface, Cord, Stem, Wall Mount
PRODUCT SPECIFICATIONS Luminaire LED: Tightly binned, high performing white Cree LED. LUMEN OUTPUT (POWER): 750 Im (.8W), 000 lm (4.7W), 500 lm (9.5W), 2000 lm (29.0W), 750 / 750 lm (.8W /.8W), 000 / 000
DRD2 Recessed LED Downlight Commercial New Construction 4, 6, 8 Aperture
PRODUCT SPECIFICATIONS Frame-in Kit MOUNTING FRAME: Die-cast aluminum. JUNCTION BOX: Galvanized steel. Equipped with (4) 1 /2 and (2) 3 /4 knockouts with pryout slots to allow straight conduit runs. Approved
Cylindrix III Mini. Pendant Multiples
Cylindrix III Mini Pendant Multiples 2 Light Pendant Straight Multiple 3 Light Pendant Straight Multiple Product Overview Performance Chart Features Cylindrix III Mini Pendant Multiples perform beautifully,
LAD6 6 LED Architectural Downlight
Catalog # : Project : Prepared By : Date : LAD6 6 inch LED new construction downlight delivers superior performance and energy efficiency. Designed to use anodized aluminum reflectors delivering even illumination
6" Round Downlight. Product Overview Recessed Round Downlight Wattage: 38. Fixture Type. Performance Chart. Electrical Data. 6" Round Downlight
6" Round Downlight Features The 6" downlight shines new light on your bigger jobs. The downlight performs perfectly in large retail and commercial spaces. Designed for higher ceilings, this downlight features
id + 6" x 6" Downlight mm Trim ChromaSure: Color consistency resulting in a 2-step MacAdam ellipse across the entire ID+ product line.
white flange black flange titanium silver flange clear diffuse warm diffuse DIMENSIONAL DATA Downlight 12.81 325.4mm FEATURES ChromaSure: Color consistency resulting in a 2-step MacAdam ellipse across
PRODUCT SPECIFICATIONS
ENVIRONMENTALLY FRIENDLY, ENERGY EFFICIENT One fixture converts nearly any manufacturers incandescent, CFL or H.I.D. fixtures with a rough-in inner diameter of 7-5 /8 to 8-1 /8 diameter to high efficiency
800 TO 9000 LUMEN 8 LED SILENT CEILING DOWNLIGHT HYPERBOLIC OPEN APERTURE L8 SERIES
ENVIRONMENTALLY FRIENDLY, ENERGY EFFICIENT Lumen packages suitable for ceiling heights ranging from 8 to over 100 Efficacies up to 109 lm/w Superior-quality white LED light output using Chip on Board technology
ID+ 6" x 6" trim. High ceiling downlight with a choice of beamspreads is ideal for lobbies, atriums and convention centers.
LED HIGH CEILING DOWNLIGHT wall wash companion DIMENSIONAL DATA FEATURES High ceiling downlight with a choice of beamspreads is ideal for lobbies, atriums and convention centers. Optical design creates
Hornet HP. Pendant Multiples
2 Light Pendant Straight Multiple Features Hornet High Power (HP) perform beautifully, punching through higher ambient light with strong output making them perfect for retail applications. Designed for
LAD8 8 LED Architectural Downlight
Catalog # : Project : Prepared By : Date : LAD8 8 inch LED new construction downlight delivers superior performance and energy efficiency. Designed to use anodized aluminum reflectors delivering even illumination
DRD2 Recessed LED Downlight General Retrofit Junction Box
PRODUCT SPECIFICATIONS Light Engine LED: Tightly binned, high performing white Cree LED. LUMEN OUTPUT (POWER): 750 Im (10.8W), 1000 lm (12.8W). COLOR QUALITY: 93+ CRI, 2-step SDCM. CCT OPTIONS: 2700K,
R6NC 6" LED Recessed Downlight: Universal New Construction Housing
Specifications/Features Housing/Mounting Specification grade 6" housing, 6-1/2" aperture. 6-5/8" Ceiling opening. 16 Gauge galvanized steel housing with die-cast aluminum heat sink. Requires minimum 3"
NIO-4RTL / NIO-4STL 4" Iolite Trimless Reflectors (New Construction only)
HIGH EFFICACY LED LIGHT SOURCE REQUIREMENTS ILLUMINATING THE FUTURE...SINCE 1989 NIO-4RTL / NIO-4STL 4" Iolite Trimless Reflectors (New Construction only) Source: 14W LED 800lm or 1000lm PRODUCT DESCRIPTION
LAD4 4 LED Architectural Downlight
Catalog # : Project : Prepared By : Date : LAD4 4 inch LED new construction downlight delivers superior performance and energy efficiency. Designed to use anodized aluminum reflectors delivering even illumination
DCC2 LED Cylinder Surface, Cord, Stem, Wall Mount
PRODUCT SPECIFICATIONS Luminaire LED: Tightly binned, high performing white Cree LEDs enable excellent fixture to fixture color consistency and long lifetime. Delivers 93+ CRI in all available color temperatures.
Hornet HP. Square Downlights
Downlight Adjustable (Trimless version shown) Features Small in size but big on performance. The Hornet downlights deliver the output of the 2 ceramic metal halide, but with the control and crisp color
Hornet HP. Square Downlights
Downlight Adjustable (Trimless version shown) Features Small in size but big on performance. The Hornet downlights deliver the output of the 2 ceramic metal halide, but with the control and crisp color
2000 LUMENS A3-LED. Submittal form is Tel: Fax:
UPTO 2 LUMENS DESCRIPTION: Achieve all of your lighting application objectives with only one universal high-performance architectural housing. The Fusion A3-LED is a 3 LED Universal Downlight that can
CLUSTERS PLANAR DOWNLIGHT W W W. L U M E N W E R X. C O M
DESCRIPTION Clusters is the quiet, precise, and scalable system for downlighting. Based on a fundamental 1.2" square cell, Clusters planar downlights are available in 2x2, 3x3 and 5x5 configurations, all