VILLBEK LTD. D CATALOGUE INSULATE 2017 V1
|
|
- Eustace Ellis
- 6 years ago
- Views:
Transcription
1 2017 V1 INSULATE D TOOLS CATALOGUE
2
3 IMPACT TEST There are two tests carried out: The first test is performed at an ambient of -25±3 C(the tools lay in a cold chamber for 2 hours), if with C marked test need to be done by -40±3 C and is carried out 120 seconds after the tools have been removed from the chamber. The second test is carried out at ambient temperature of 23±5 C. The hammer is allowed to fall freely on three different places of the insulated material. The test piece is acceptable if t he handle is not cracked, broken or does not show signs of faking. This test can be compared to a fall of the tool from a height of 0.6m at a temperature of -25 C and a fall from a height of 2m at room temperature. INSULATION TEST Before testing the test piece is heated to 70 C±3 C for 168 hours. The hanger is loaded with weights(500n), wrenches and sockets sets with weights(100n). The duration of test is 3 minutes after the test piece has been removed from heat. The test piece is acceptable if the handle remains firmly attached to the conducting part after 3 minutes of testing. ELECTRICAL TEST Before testing, the tools are immersed in a bath of water at room temperature of 24 hours(±0.5hours) The test pieces are acceptable if there is no electrical discharge, spark over or flashover, during the 3 minutes of testing at a voltage of 10 KV. FLAME RETARDANCY TEST The flame is applied to the test piece for 10 seconds. The test piece is acceptable if the height of the flame on the burning handle does not exceed 120mm in an observation period of 20 seconds after the burner has been removed. STAMP TEST The indenter, loaded with a weight of 20N and a voltage of 5 KV, is applied to the centre of the handle. The test is successful if the test piece subsequently passes the electrical test.
4 INSULATED PLIERS Soft wire Medium hard wire Hard wires Cu+Al multi-conductor cable, strand and multi-stranded Metal part made in CRV steel Precision machined body with strictly heat treatment Manufactured according to IEC60900 standard Metal part made in CRV steel Pearl nickel plated surface Precision machined body with strictly heat treatment Manufactured according to IEC60900 standard DIPPED GRIP DIPPED GRIP COMBINATION PLIERS COMBINATION PLIERS
5 FLAT NOSE PLIERS SNIPE NOSE SIDE CUTTING PLIERS WATER PUMP PLIERS CURVED NOSE CUTTING PLIERS mm (Max) DIAGONAL PLIERS DIAGONAL PLIERS
6 INJECTION INSULATED CABLE CUTTERS FLAT NOSE PLIERS C D1 T1 L3 W3 mm (Max) mm 2 (Max) L3 W3 D1 T CABLE SHEARS ROUND NOSE PLIERS D1 T1 L3 W3 mm (Max) mm 2 (Max) WIRE STRIPPERS L3 W3 D1 T WIRE STRIPPERS mm mm mm mm
7 INSULATED SCREWDRIVERS Blade made in S2 material, with black finish surface Grip and sleeve manufactured according to EN standard Tip type shown by endcap Blade made in S2 material, with black finish surface Grip and sleeve manufactured according to EN standard Tip type shown by endcap VDE SLOTTED SCREWDRIVER A B CxD L x x x x x x VDE PHILLIPS SCREWDRIVER A B CxD L PH X PH X PH X PH X
8 INSULATED SCREWDRIVERS Blade made in S2 material, with black finish surface Grip and sleeve manufactured according to EN standard Tip type shown by endcap Blade made in S2 material, with black finish surface Grip and sleeve manufactured according to EN standard Tip type shown by endcap VDE SCREWDRIVERS (SLOTTED) VDE SCREWDRIVERS (SLOTTED) PHILIPS B A B L L L L L L L07 PH L15 PH L08 PH L16 PH L09 PH L17 PH L10 PH L18 PH
9 VDE POZI SCREWDRIVER VDE TX SCREWDRIVER A B CxD L PZ X PZ X PZ X PZ X VDE HEX SCREWDRIVER A B CxD L T X T X T X T X T X VDE NUT SCREWDRIVER A B E CxD L A B CxD L X X X X X X x x x x x x x x x x x x INSULATED PRECISION SCREWDRIVER 7PCS SET C INSULATED SCREWDRIVER 8PCS SET Slotted: 0.5x3.0x50 Phillips: PH0x50 TX: T6x50 T8x50 T10x50 T15x50 T20x Slotted: 0.4x2.5x75, 0.8x4.0x100, 1.0x5.5x125, 1.2x6.5x150 Phillips: PH0x60, PH1x80, PH2x100 Voltage Tester: 3.0x70 7
10 VDE PRECISION SLOTTED SCREWDRIVER C VDE PRECISION PHILLIPS SCREWDRIVER C A B CxD L x x x x x A B CxD L PH x PH x PH x VDE PRECISION TX SCREWDRIVER C INSULATED PRECISION SCREWDRIVER 7PCS SET C A B CxD L T x T x T x T x T x Slotted: 0.23x1.5x50 0.3x1.8x50 0.4x2.0x50 0.4x2.5x50 0.5x3.0x50 Phillips: PH00x50 PH0x50 INSULATED SCREWDRIVER 7PCS SET INSULATED SCREWDRIVER 8PCS SET Slotted: 0.5x3.0x100, 0.8x4.0x100, 1.0x5.5x125, 1.2x6.5x150 Phillips: PH1x80, PH2x100 Voltage Tester: 3.0x Slotted: 1.0x5.5x125 Phillips: PH2x100 TX: T10x70 T15x80 T20x100 T25x125 T30x130 Voltage Tester: 3.0x70 8
11 INSULATED SCREWDRIVER 6PCS SET INSULATED CHANGABLE SCREWDRIVER 12PCS SET C Nut: 5.5x x x x x x Slotted: 0.4x2.0x x2.5x x3.0x x3.5x x4.0x x5.5x x6.5x100 Phillips: PH0x60 PH1x80 PH2x100 Voltage Tester: 3.0x70 Handle: 31x PCS VDE INSULATED SCREWDRIVER SET (INDUSTRIAL) C INSULATED CHANGABLE SCREWDRIVER 50PCS SET C VDE/GS CERTIFICATED 4pcs slotted: 1.2x6.5x100mm,1x5.5x100mm,0.8x4x100mmx0.5x3 x100mm 2pcs Phillips:PH2x100mm,PH1x80mm 2pcs Pozidriv:PZ2x100mm, PZ1x80mmx 3pcs Torx: T20x100mm,T15x100mm,T10x100mm 1pc Single-Pole Voltage Tester 1pc Screwdriver Handle Packed by color box" x2.0x x2.5x x3.0x x3.5x x4.0x x5.5x x6.5x100 PH0x100 PH1x100 PH2x100 PZ0x100 PZ1x100 PZ2x100 T6x100 T8x100 T9x100 T10x100 T15x100 T20x100 T25x100 T27x100 T30x100 H2.5x100 H3.0x100 H4.0x100 H5.0x100 H6.0x100 R1x100 R2x100 TRI 1x100 TRI 2x100 TRI 3x100 TRI 4x100 TORO 4x100 TORO 6x100 TORO 8x100 TORO 10x100 M4x4.0x100 M5x5.0x100 M6x5.0x100 4x100 6x100 8x100 10x x89 8.1x Voltage Tester: 3.0x70 Handle: 31x105 9
12 INSULATED WRENCHES & SOCKETS C Metal part made in crv steel Chrome plated surface Well heat treated to meet DIN standard Manufactured according to IEC60900 standard BI-COLOR INJECTION GRIP VDE GS PENDING Metal part made in crv steel Chrome plated surface Well heat treated to meet DIN standard Manufactured according to IEC60900 standard B S A L DIPPED GRIP INJECTION INSULATED OPEN END WRENCH OPEN END WRENCH 10 S A B L S A B L
13 INJECTION INSULATED RING WRENCH C RING WRENCH VDE GS PENDING A H A H B S L L S A B L H B S L S A B L H RING GEAR WRENCH 72 teeth B S A L S A B L
14 INJECTION INSULATED T-HANDLE T-HANDLE H L /2" /8" H L /2" /8" INJECTION HEXAGONAL SOCKET 1/2" HEXAGONAL SOCKET 1/2" INJECTION HEXAGONAL SOCKET 3/8" HEXAGONAL SOCKET 3/8"
15 INJECTION SOCKET 1/2" SOCKET 1/2" H H D D D H D H INJECTION SOCKET 3/8" SOCKET 3/8" H H D D D H D H
16 INJECTION INSULATED REVERSIBLE RATCHET HANDLE 1/2" 3/8" REVERSIBLE RATCHET HANDLE 1/2" 3/8" VDE GS PENDING /2" /8" /2" /8" 200 INJECTION EXTENSION BAR 1/2" 3/8" EXTENSION BAR 1/2" 3/8" /2" /2" /8" /8" /2" /2" /8" /8" 250 CROSS RIM WRENCH INJECTION INSULATED JUNIOR HACKSAW D L1 L D L1 L L D D L
17 INJECTION INSULATED PRECISION TWEEZERS C PRECISION TWEEZERS INJECTION INSULATED PLASTIC CLAMP C PLASTIC BRUSH FULLY INSULATED 1000V Fixed head mm 35mm 50mm 15
18 INJECTION INSULATED KNIVES VOLTAGE TESTER C VDE GS/CE 125~250V CABLE KNIFE (STRAIGHT) DISMANTLING KNIFE (SEMICICLE) DISMANTLING KNIFE (LONG HOOK) CABLE KNIFE (GUARD) DISMANTLING KNIFE CABLE KNIFE (CHANGABLE) INJECTION INSULATED MALLET L D D Φ mm Weight/kg
19 P LASTIC SLIP-ON C APS SELF-CLAMPING SLIP-ON CAPS DIN VDE :2013 DIN VDE :2013 GSCC-1 10x80 GSCC 5x40 GSCC-2 10x80 GSCC 5x70 GSCC-3 10x80 GSCC 10x75 GSCC 20x100 GSCC GSCC 30x120 40x135 GSCC 50x155 GSCC 60x150 INJECTION INSULATED ADJUSTABLE WRENCH PRECISION MACHINED BODY WITH STRICTLY HEAT TREATMENT C S (Max) ADJUSTABLE WRENCH PRECISION MACHINED BODY WITH STRICTLY HEAT TREATMENT S S (Max)
20 INJECTION INSULATED HEXAGON KEY L-WRENCH FOR HEXAGON SCREWS HEXAGON KEY L-WRENCH FOR HEXAGON SCREWS V DE GS PENDING SOCKET WRENCH HEXAGON KEY T-WRENCH L D H 18 L D H D L H D L H INJECTION MOULDED HEXAGON KEY T-WRENCH 1000V
21 INJECTION INSULATED SCISSORS C INSULATED RUBBER MATS For Protection When Working Live or Close to Live Parts / mm x500x1, x1000x1,6 19
22 PLASTIC CLAMP PLASTIC CLAMP 1000V 1000V mm mm SAFETY GRIP SPREAD-WEDGE For NH fuses with arm protection Siemens handle for NH fuses 00 3, arm protection when interrupting high current intensity (arc). V V *20*37mm ADJUSTABLE TORQUE WRENCH With Protection Bag Chrome plated, made out of special steel, tempered, Accuracy ± 4%, of the taken measurement, Adjustable through button at the end of the handle, You feel the desired measurement is reaching by the slight Bending of the head, the accustic signal is muffled by the insulation, insulation dipped in various layers, tested piece by piece with V / Nm / Nm /4 3/ Nm 5 25 Nm 1000V 20
23 ADJUSTABLE TORQUE WRENCH With Protection Bag Chrome plated, made out of special steel, tempered, Accuracy ± 4%, of the taken measurement, Adjustable through button at the end of the handle, You feel the desired measurement is reaching by the slight Bending of the head, the accustic signal is muffled by the insulation, insulation dipped in various layers, tested piece by piece with V mm 1/ Nm mm 1/ Nm mm 1/ Nm 1000V INSULATING SLEEVE FOR LOW VOLTAGE CONDUCTOR WIRE RUBBER ISOMAT One side smooth,other side grooved. Use : Insulates live conductor wire up to 15mm d iameter during work on or near the conductor. Technical specifications : Made of rubber 3,3 mm thick. VTSTBT 440 BA x 1000 mmx 3,5 mm VOLTAGE TESTER VOLTAGE TESTER Voltage test, 2 pole with LED (12-690V AC/DC) Voltage test, 1 pole, indicating phase Phase rotation test, 2 pole Continuity with LED and acoustic signal Automatic self test function. Full voltage indication, even without batteries Automatic on/off function no buttons Build in, bright white, LED flashlight Double insulation, IP65, GS approved CAT IV 600V. 2000X is provided with battery and fulfills IEC , EN KAT IV 600 and TUV/GS. Voltage test, 2 pole with LED (12-690V AC/DC) Voltage test on display (7-800V AC/DC) Voltage test, 1 pole, indicating phase Phase rotation test, 2 pole Continuity with LED and acoustic signal Automatic self test function. Full voltage indication, even without batteries Automatic on/off function no buttons Build in, bright white, LED flashlight Double insulation, IP65, GS approved CAT IV 600V. 2100X is provided with battery and fulfills IEC , EN KAT IV 600 and TUV/GS. 2000X Voltage tester 2100X Contact probe Voltage tester Contact probe 21
24 PROTECTION HELMET Protection Helmet for electricians, with integrated vizor, adjustable to head. Additionally equipment (helmet light, ear protection...) on request EN 397:2012 EN 50365:2002 EN 166:2001 Colors: yellow, red, white, blue E-MAN HEAD LAMP HEAD LAMP Safety: Weatherproof: IP54 (dust and weather resistant), Lighting Performance: 3 Nichia 5mm LED, Light output: 22 lumens, Lighting surface area: 40m², 1 Lighting intensity. Weight and dimensions: Weight: 94 grams (with batteries), Width: 6cm - depth: 4,5cm - height: 3,5cm. Energy: 3 alkaline batteries supplied (3 x LR03 (AAA), Operating time: up to 60 hours. Safety: Weatherproof: IP54 (dust and weather resistant), Lighting Performance: 3 Nichia 5mm LED, Light output: 22 lumens, Lighting surface area: 40m², 1 Lighting intensity. Weight and dimensions: Weight: 94 grams (with batteries), Width: 6cm - depth: 4,5cm - height: 3,5cm. Energy: 3 alkaline batteries supplied (3 x LR03 (AAA), Operating time: up to 60 hours. Boxer 300 Boxer 410 BRACKET FOR FIXING ON HELMET KEEPS THE HEADLAMP ON A HELMET WITHOUT THE HEADBAND CLICAS 1200 x 1000 mmx 3,5 mm 22
25 DIELECTRIC BOOT DIELECTRIC OVERBOOT An electrically insulating dielectric boot with an integral steel toe cap and vulcanized rubber sole for superior slip resistance. The Dielectric boot provides protection of up to 20kV over the complete boot for over 8 hours, and 35kV over the sole for 3 minutes. Safety Footwear EN ISO I E HRO SRA CI Electrically Insulating Footwear EN Class 0 Dielectric Footwear ASTM F1117 Personal Protective Equipment PPE DIR 89/686/EEC An electrically insulating dielectric overboot approved to current European standards with a vulcanized rubber sole for superior slip resistance. The dielectric boot provides protection of up to 20kV over the complete boot for over three minutes. Safety Footwear EN ISO I E HRO SRA FO Electrically Insulating Footwear EN Class 0 Dielectric Footwear ASTM F1117 Personal Protective Equipment PPE DIR 89/686/EEC (EU) RECS 35,36,37,39,40,41,42,43 44,45,46,47,49,50 (EU) REKA M: L: XL: RATCHET CABLE CUTTERS With ratchet device, energy saving when cutting Not for cutting steel or steel wire RATCHET CABLE CUTTER J38 Cutting range: 400 mm max. Cutting easily with forging blade and long lifetime Not for cutting steel or steel wire With safety lock cutting rage Lenght Weight Blade LK-760L 500mm2 max 430mm 0.90kg electrophoreses Weight Lenght J38 1,1 Kg 235 mm 23
26 CABLE KNIFE For removing all layers of insulation on cables with diameters of over 25mm Suitable for longitudinal and circular cutting Cutting depth can be adjusted from 0-5mm Replaceable blade (both sides can be used) Integrated wire bush for cleaning conductors to make better connections. Brushes up to 1000 MCM conductor. Wire brush is easily replaceable. Blade back design discourages scraping the aluminium conductor wich can distort the size. Stainless steel black oxide coated blade for maximum durability and sharpness. Lenght Weight PG-5 170mm 0.15kg BB-1 SELF-ADJUSTING INSULATION STRIPER For stripping the plastic or rubber insulation of the single, multiple cables and wires of mm 2 Stripping diameter can be adjusted automatically for different wire cross sections With wire cutter for copper and aluminium wires, mulitiple strand upto 6mm 2 With easy changeable blade, plastic jaws and adjustable length stop Shock-resistant glass fiber and plastic body No damaging of the conductor core, long lifetime Weight FS-D3 190mm 0.148kg MULTI-FUNCTIONAL CRIMPING PLIER For cutting, stripping wires and crimping insulated and non-insulated terminals, tabs and receptacles Designed with screw holes for cutting copper and brass wires (Thread: M2.6, 3.0, 4.0, 5.0mm) SELF-ADJUSTING INSULATION STRIPER For stripping the plastic or rubber insulation of the single, multiple cables and wires of 6-16mm 2 Stripping diameter can be adjusted automatically for different wire cross sections With wire cutter for copper and aluminium wires, mulitiple strand up to 16mm 2, single strand up to 6mm 2 With easy changeable blade, plastic jaws and adjustable length stop Shock-resistant glass fiber and plastic body No damaging of the conductor core, long lifetime Lenght Weight FS mm 0.23kg Weight WS mm 0,15kg 24
27 INSULATED TOOLS SET Metal part made in CRV steel,chrome plated surface Well heat treated to meet DIN standard Bi-color injection grip and dipped grip manufactured according to IEC60900 standard 22" WATER PROOF CASE IP67 CLASS VILLBEK LTD "WATER PROOF CASE IP67 CLASS A+B+C+D 52PCS INSULATED TOOLS SET WITH WATER PROOF CASE A+B+D+F 45PCS INSULATED TOOLS SET WITH WATER PROOF CASE A TRAY PCS INSULATED PLIERS B TRAY 11PCS SCREWDRIVER, KNIFE AND TESTER C TRAY 21PCS 1/2" SOCKETS AND ACCESSORY D TRAY 14PCS OPEN WRENCHES AND ADJUSTABLE WRENCHES 7" COMBINATION PLIERS 8" LONG NOSE PLIERS 6" DIAGONAL CUTTER 6" STRIPPING PLIERS 10" WATER PUMP PLIERS 6 CABLE CUTTER PH0X60,PH1X80,PH2X100,PH3X x75mm,3x100mm,4x100mm, 5.5x125mm,6.5x150mm. STRAIGHT KNIFE VOLTAGE TESTER SOCKETS: 10/11/12/13/14/16/ 17/18/19/21/22/24/27 SOCKETS BITS: 4,5,6,8MM EXTANSION BAR 5"&10" T HANDLE RATCHET HANDLE OPEN WRENCH 8/10/11/12/13/14/15 /16/17/18/19/22/24 8" ADJUSTABLE WRENCH E TRAY PCS 3/8" SOCKETS AND ACCESSORY F TRAY 14PCS NUTS AND PRECISION SCREWDRIVERS G TRAY 14PCS RING WRENCHES AND HEX KEYS H TRAY 4PCS SPECIAL TOOLS SOCKETS : 8/10/11/12/13/14/ 16/17/18/19/21/22 SOCKETS BITS: 4,5,6,8MM EXTANSION BAR 5"&10" T HANDLE RATCHET HANDLE NUT: 5/5.5/6/7/8/10/13 PRECISION: 3/PH0/T6/T8/T10/T15/T20 RING WRENCH: 10/11/12/13/14/15/17/19 HEX KEY:3/4/5/6/8/10 240MM RATCHET CABLE CUTTER HACK SAW PLASTIC CLAMP*2 25
28 INJECTION INSULATED SET 15PCS INJECTION INSULATED SET 29PCS Insulated Combination Plier 200 Insulated Diagonal Plier 160 Insulated Snipe Nose 200 SideCutting Plier Insulated Wire Stripper 160 Insulated Cable Knife 50x180 Straight Voltage Tester 3.0x70 Insulated Screwdriver Slotted Phillips 2.5x75, 3.0x100, 4.0x100, 5.5x125, 6.5x150 PH0x60, PH1x80, PH2x100, PH3x PCS 1/2" Insulated Socket 10, 11, 12, 13, 14, 16, 17, 18, 19, 21, 22, 24, 27 4PCS 1/2" 4x120, 5x120, 6x120, 8x120 Insulated Hexagon Socket 2PCS 1/2" 125, 250 InsulatedExtension Bar 1/2" 200 Insulated T-handle Wrench 1/2" 250 Insulated Reversible Ratchet Insulated combination Plier Insulated Diagonal Plier Insulated Snipe Nose Side 160 Cutting Plier Insulated Adjustable Wrench 2PCS x100, 5.5x125 Insulated Screwdriver Slotted 2PCS Phillips PH1x80, PH2x100 INJECTION INSULATED SET 20PCS INJECTION INSULATED SET 20PCS PCS 3/8" Insulated Socket 4PCS 3/8" Insulated Hexagon Socket 2PCS 3/8" Insulated Extension Bar 3/8" Insulated T-handle Wrench 3/8" Insulated Reversible Ratchet 8, 10, 11, 12, 13, 14, 16, 17, 18, 19, 21, 22 4*75, 5*75, 6*75, 8*75 125, PCS Injection Insulated Open End Wrenches Insulated Adjustable Wrench 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 21, 24 27, 30,
29 INJECTION INSULATED SET 22PCS DIPPED INSULATED SET 20PCS /8" 200 Insulated T-Handle Wrench 3/8" 125 Insulated Extension Bar 3/8" Insulated Socket 8, 10, 12, 13, 14, 17, 19 Insulated Screwdriver Slotted 3.5X100, 4.0X100, 5.5X125 Insulated Screwdriver PH1X80, PH2X100, PH3X150 Phillips Insulated Open End Wrench 8, 10, 12, 13, 14, 17, Dipped Insulated Open End Wrench 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 21, 24 27, 30, 32 INSULATED SET 25PCS INSULATED SET 21PCS Dipped Insulated 200 Combination Plier Dipped Insulated Diagonal Plier 160 6PCS Insulated Screwdriver PH: PH0x60, PH1x80, PH2x100 SL: 0.6X3.5X100, 0.8X4.0X100, 1.0X5.5X125 Insulated Cable 50x180 Knife(Straight) Insulated Cable 28x155 Knife(Semicircle) 7PCS 1/2'' Dipped Insulated 10, 11, 12, 13, 14, 17, 19 Sockets 7PCS Dipped Insulated 10, 11, 12, 13, 14, 17, 19 Open End Wrench 1/2'' Dipped Insulated 200 T-Handle Dipped Insulated Combination Plier Dipped Insulated Diagonal Plier 4PCS Insulated Screwdriver Insulated Cable Knif(Straight) 7PCS 1/2'' Dipped Insulated Sockets 4PCS 1/2" Dipped Insulated Hexagon Socket 2PCS 1/2" Dipped Insulated Extension Bar 1/2'' Dipped Insulated Reversible Ratchet PH: PH0x60 SL: 0.6x3.5x100, 0.8x4.0x100, 1.0x5.5x125 50x180 10, 11, 12, 13, 14, 17, 19 4x120, 5x120, 6x120, 8x ,
30 INSULATED SET 99PCS 3 PCS INSULATED PLIER SET Insulated Injection Combination 180 Plier Insulated Injection Snip Nose Plier 200 Insulated Injection Diagonal Plier PCS Injection Insulated Open Jaw Wrench 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 21, 22 Injection Insulated 250 Adjustable Wrench Injection Insulated Pliers 200 Injection Insulated Snipe 200 Nose Side Cutting Pliers Injection Insulated Diagonal 160 Pliers Injection Insulated Wire 160 Strippers Injection Insulated Water 250 Pump Pliers Injection Insulated Cable 250 Shears Injection Insulated Cable cutters 240 4PCS Insulated Screwdrivers SL: 0.5x3.0x100, 1.0x5.5x125 PH: PH1x80, PH2x100 2 PCS Injection Insulated 50x180, 38x155 Cable Knife Insulated Saw 150 4PCS Injection Insulated Tweezers 2PCS Insulated Plastic 150, 200 Clamp 3PCS Insulated Plastic Slipon 1# 2# 3# Caps 3PCS Insulated Self- 10, 20, 30 Clamping Slip-On Caps Flashlight 28*100*5 VDE Precision Screwdriver Sets 7PCS VDE Changable Screwdriver Sets 50PCS VOLTAGE TESTER 140 ABS BOX 5 PCS INSULATED SCREWDRIVER SET 7 PCS INSULATED WRENCH SET Insulated Screwdriver Slotted 3.5X100, 4.0X100, 5.5X125 Insulated Screwdriver Phillips PH1x80, PH2x Insulated Injection Open End Wrench 8, 10, 12, 13, 14, 17, 19 28
31 9 PCS INSULATED SOCKET SET 11 PCS INSULATED SOCKET SET /8" Insulated Reversible Ratchet Handle 200 3/8" Insulated Extension Bar 125 3/8" Insulated Socket 8, 10, 12, 13, 14, 17, /8" Insulated T-Handle 200 Wrench 3/8" Insulated Socke 8, 10, 11, 12, 13, 14, 16, 17, 18, PCS INSULATED SOCKET SET 5PCS INSULATED RING GEAR WRENCH SET /8" Insulated T-Handle 200 Wrench 3/8" Insulated Socket 8, 10, 11, 12, 13, 14 3/8" Insulated Hexagon Socket 4x75, 5X75, 6X75, 8X /8" Insulated T-Handle Wrench 10, 12, 13, 14, 17 CARRY BAG PROTECTION BAG FOR ELECTRICAN'S GLOVES Bag for carrying and storing rubber mats and covers up to 1300 x 1000 mm. Made of strong plastic material, with zipped closing cap and adjustable carrying belt. BA x1000mm V x170 mm 29
32 TOOL BAG TOOL BAG EMPTY BAG Front bag, fold out front wall, 18 adjustable loops on front and rear wall (9 each), Fixed loops on the left and the right side (1 each), carrier rings, aluminium edge reinforcement, two locks with keys EMPTY BAG Removable central wall, semi-fold out front and rear wall, two surrounding leather straps, 18 adjustable loops on the front and on the rear wall (9 each), 16 push-in compartments on the central wall, aluminiumedge reinforcement, galvanized steel bottom tray, one lock with key, carrier rings Weight Material Weight Material ,8 Kg Genuine leather 420 x 150 x ,1 Kg Genuine leather 420 x 170 x 320 TOOL BAG Flat surface for standing. Max 150kg Linemarking - use handle as ruler Angle measuring on lid. 260 lid = open view of box and step, also protects hinges TOOL BAG EMPTY BAG Central wall, large front bag,semi-fold out front and rear wall, 8 push-in compartments on the front wall, 9 adjustable loops on the front of the central wall, 8 push-in compartments on the rear wall and 8 Fixed loops on the side-walls (4 each), aluminium edge reinforcement, galvanized steel bottom tray, surrounding leather strap, 2 locks with keys, carrier rings Weight Material ,0 Kg Genuine leather 450 x 190 x 340 TOOL BAG Outer Dimensions (mm) Inner Dimensions (mm) Weight Capacity (Lts) SSC1 464 x 353 x 142h. 400 x 300 x 80h. 2,2kg 9,6 SSC2 464 x 353 x 212h. 400 x 300 x 150h. 2,5kg 18 SSC3 464 x 353 x 362h 400 x 300 x 380h. 3kg 45,6 30
33 CRIMPING PLIER Crimping range: mm 2 LAS-005 is an ideal crimping tool for the connection of the power distributing cabinet. The tools are special designed with precise crimping die sets without screw fixing. You could replace the die sets only by pushing ahead. The operation is easy and convenient.the handles of LAS-005 are designed according to human factors engineering ensure high-quality crimping effect after crimping repeatedly. There are two sets of dies at both side for using and storing easily. SELF-ADJUSTABLE CRIMPING PLIER HSC8 6-4A It is applicable for tubular bare terminals and pre-insulated terminal on non-welding connection complied with standard electrical connection. When crimping, the terminal should be put into crimping pliers laterally. The demanded pressing force must be reached before the brake unit automatically release the jaw of the pliers. Thus high quality crimping standard could be ensured during repeatedly crimping. Due to perfect gripping position fixed and logical and light structure and the handle shape design meeting human being engineering principle, it reduces fatigue degree. Capacity AWG Lenght Weight LAS mm AWG 230mm 0.68kg Weight Capacity Lenght HSC8 6-4A 0,36 Kg 0,08-6,0 mm 175 mm SELF-ADJUSTABLE CRIMPING PLIER The design is unique due to light weight and saving energy. When crimping tightly, the gripping force would evenly transfer to all the section of crimping terminal. Because of reasonable design complied with human being engineering principle, the weight of the pliers is only 360g and the lenght of the pliers body is only 175mm. SUPER STRENGHT-SAVING CRIMPING PLIER FSA-056YJ For crimping insulated terminals and butt-connectors. Crimping range: 0,5-6,0 mm. Precise crimping die sets and integral lock with self releasing mechanism ensure highquality crimping effect after crimping repeatedly. Scientific leverage design saves energy when operating. Rrelease locking if operates error. Provided with two sets of dies in handles for using easily. Energy saving by humanization handle design. Weight Capacity Lenght HSC ,36 Kg 0,08-6,0 mm 175 mm Weight Capacity Lenght FSA-056YJ 0,75 Kg 0,5-1,5 1,5-2,5 4-6 mm 243 mm GERMANY STYLE SMALL CRIMPING PLIER PZ 0,5-16 Application: for cable and sleeves. Design: crimping in the marked trapezoidal profile for particularly tight connections between the sleeves and the conductor. Material: special tool steel. oil-hardened. Weight Capacity Lenght PZ 0,5-16 0,25 Kg 0,5-16,0 mm 220 mm 31
34 Combination pliers Diagonal cutting pliers Cr-V, Black finish Bi-color plastic handle Packed by PP card Cr-V, Black finish Bi-color plastic handle Packed by PP card Long nose pliers Cr-V, Black finish Bi-color plastic handle Packed by PP card mm,6" mm,7" mm,8" Bent nose pliers Cr-V, Black finish Bi-color plastic handle Packed by PP card mm,6" mm,7" mm,6" mm,8" Wire stripping pliers Cr-V, Black finish Bi-color plastic handle Packed by PP card mm,6" Water pump pliers Cr-V, Black finish Bi-color plastic handle Packed by PP card mm,6" mm,10" 32
35 VILLBEK LTD. 12Pcs Combination spanners set 3 PCS Pliers set Chrome plated, matte finish Packed by pouch Forged steel, Nickel finish Bi-color dipped handle Packed by sliding card mm,4.5" 8Pcs Double open end spanners set 6x7/8x9/10x11/12x13/14x15/16x17/18x19/20x22 6Pcs screwdrivers set /7/8/9/10/11/12/13/14/17/19/22 8Pcs Double ring spanners set x7/8x9/10x11/12x13/14x15/16x17/18x19/20x22 Cable cutter Bi-color comfortable grip Black finish magnetic tip Packed by color box Chrome plated, matte finish Packed by pouch Chrome plated, matte finish Packed by pouch Drop forged carbon steel With dipped handle Packed by sliding card 5.5*100, 6.5*150, PH1*100 PH2*150, PZ1*100, PZ2* " 33
36 26Pcs bits set Pc ratchet handle 1Pc handle:60mm 25mm Cr-v bits: SL:4,5,6,7mm PH: PH0,PH1,PH2,PH3 PZ:PZ0,PZ1,PZ2,PZ3 HEX:2,2.5,3,4,5,6mm TX:T10,T15,T20,T25,T27,T30,T40 Packed by plastic box 38Pcs bits & sockets set "9Pcs 1/4 sockets: mm 25mm Cr-v bits: SL:3,4,5,6mm PH: PH0,PH1,PH2,PH3 PZ: PZ0,PZ1,PZ2,PZ3 HEX:2,2.5,3,4,5,5.5,6mm TX:T10,T15,T20,T25,T27,T30, T40 1Pc 3 Extension Bar 1Pc 1/4 Bit Adaptor 1Pc 1/4 Handle Packed by plastic box" Measuring tape Length & width:3m/10ftx16mm Accuracy can up to MID class 2 Material: ABS case covered with TPR Comfortable holding feel and impact resistant Both sides coat Nylon of the blade Manual powerful stop button With metric and inch blade Packed by PP card 34
37 Cable knife KBX-45 For stripping the end and the middle of the conducting wire and cable between ø10-45mm. Stripping thickness can be adjusted. The knives can not touch the metal cable cores when stripping. Knives can be sharpened or replaced. KBX-45 Details : 245*80*90mm Weight: 0.56kg Cable knife SK-50 Range of use: The tool is applicable for stripping the external insulation layer of cable less than 35kV. Operating instruction: The tool comprises of the base, the moving seat and the frame. The blade can be held in the moving upper party by the screw. And the repairing blade can be fixed on the two planes by the attached inner hexagon spanner easily. When the tool turns clockwise along cable, it can move automatically with the direction of cable. It can be adjusted by the adjusting screw. Note: the product has the adjusting screw. SK-50 Details Stripping range: ø20-50mm Length:250mm Package: Plastic case Weight: 0.80kg Cable shears FG-12 Details Working range: ø25mm2 max Length:220mm Color: yellow Weight: 0.29kg 35
38 NOTE 36
39
40 HUNGARY 6728 Szeged Vágány u. 15. Tel.: Fax: Web:
MISCELLANEOUS WOOD CHISEL
MISCELLANEOUS WOOD CHISEL In hanger WOOD CHISEL SET - Grounded and lacquered blade - Hardened blade - Ergonomic bimaterial handle 74 0 3,0 74 3,8 744 4 3,9 74 3,99 748 4, 7 0 4,3 7 4,34 7 4,43 pieces -
More informationTOOL SETS. Handsaws 1
TOOL SETS Handsaws 1 2 Concrete saw & mitre saws + boxes INDEX Combination tool sets SOCKET SETS KRT951003 KRT951000 KRT951004 KRT951005 KRT500112 KRT500113 KRT500114 KRT951006 KRT951001 KRT951002 KRT951007
More informationMaster Sets with Foam Tray Organizers
Master Sets with Foam Tray Organizers D096005-FT1T 1/2" Drive SAE Impact Sockets 6 Point Standard Sockets: 3/8" - 1-1/2" - 6 Point Deep Sockets: 3/8" - 1-1/2" Foam Tray Organizer: 21-3/4" (w) x 15" (d)
More informationTool Roll 11 parts. KNIPEX Minis in belt pouch 2 parts TOOL ASSORTMENT
Tool Roll parts 9 > for telecommunications and electrical engineers > tool roll made of hard wearing polyester fabric > with practical, adjustable quick release fastener > contains eight pliers and three
More informationPRODUCT CATALOGUE. Distributor: BODDINGTONS ELECTRICAL PRODUCT CATALOGUE EDITION 3
BODDINGTONS ELECTRICAL PRODUCT CATALOGUE EDITION 3 PRODUCT CATALOGUE w w w. b o d d i n g t o n s - e l e c t r i c a l. c o m Distributor: Prospect House, Queenborough Lane Great Notley, Braintree, CM77
More informationStandard program. Tool cases. ...convincing solutions. Hard top tool cases, Leather tool cases
Standard program Tool cases Hard top tool cases, Leather tool cases...convincing solutions Assortment boxes, wallets, tool cases Metal tool boxes 5 compartments, complete black powder coating Tool case
More information25 RAILWAY STREET KINGSTON, ONTARIO K7K 2L7 (613) Fax:(613)
25 RAILWAY STREET KINGSTON, ONTARIO K7K 2L7 (613)546-6663 1-800-267-0920 Fax:(613)542-4451 EMAIL: info@levacsupply.com 330 LAURIER BLVD. P.O. BOX 460 BROCKVILLE, ONTARIO K6V 5V6 (613)345-1991 1-877-270-0317
More informationProfessional Insulated Tools Supporting Arc Flash Protection. Innovations that work. 10,000 Volt Tested 1000 Volt Rated
Professional Insulated Tools Supporting Arc Flash Protection Innovations that work 10,000 Volt Tested 1000 Volt Rated 2 Insulated Testing Procedure Arc Flash Protection: Wiha Insulated tools can be a vital
More informationD Piece 12 Point Standard Metric Socket Set. D Piece 6 Point Metric U-Joint Socket Set mm List Price: $ $120.
D004004 28 Piece 6 Point Standard SAE/Metric Socket Set SAE Standard: 3/16-9/16 Metric Standard: 4-15 mm 2, 6 Extensions Hand Driver U-Joint 45 Tooth Ratchet List Price: $170.74 $112.99 D004008 9 Piece
More informationINSULATED TOOLS VDE BI LINE VDE LINE. wrenches. screwdrivers
RE YOU EQUIPPE TO TKE SPEIFIITIES OF YOUR WORK? Protection against shock from energised sources greater safety! Unior insulated VE tools ensure ultimate protection even when used around live circuits with
More informationProfessional Insulated Tools. Supporting Arc Flash Protection. Updated 3/1/10. Innovations that work. 10,000 Volt Tested 1000 Volt Rated
Professional Insulated Tools Supporting Arc Flash Protection Updated 3/1/10 Innovations that work 10,000 Volt Tested 1000 Volt Rated 2 Toll Free: (800) 494-6104 Arc Flash Protection: Wiha Insulated tools
More informationUsed for installation and dismantling designs such as pipes of almost any diameter. Handle: 20" Chain: 25"
JTC-1147 6" CHAIN WRENCH Used for installation and dismantling designs such as pipes of almost any diameter. Handle: 6" Chain: 18" (400mm) JTC-1149 20" CHAIN WRENCH Used for installation and dismantling
More informationHandle: 20" Chain: 25"
Handle: 6" JTC-1147 6" CHAIN WRENCH Chain: 18" (400mm) Handle: 20" Chain: 25" JTC-1149 20" CHAIN WRENCH JTC-1150 12" STRAP WRENCH Handle: 12" Strap length: 36" JTC-1355 EUROPEAN DOOR HINGE / HANDLE KIT
More informationLive Line tools and Arc-Flash protection
Live Line tools and Arc-Flash protection 2018 PRODUCT CATALOGUE We provide everything in tools and safety equipment, from LLE tools to Arc Flash protection. SAB ELTEKNIK AB, MJÖBÄCKSVÄGEN 2, 512 60 ÖVERLIDA,
More informationWhy Dynamic Toolboxes?
Why Dynamic Toolboxes? All drawers feature ball bearing slides for smooth operation Scratch and solvent resistant powder coat finish Drawer liners included Tubular lock and key for maximum security Heavy-duty
More information$4.99 $26.99 $19.99 $25.99 $7.99 $10.99 $12.99 $15.99 $17.99 $ Rubber Mallet-Hickory Handle. Dead Blow Hammer-Fiberglass Handle
Two or three jaws design for Spring-loaded jaws for quick and easy one person set-up for different applications Heavy duty forcing screw with live center for strong even pulls Spread range from 3 to 7
More informationDepth of opening / Clamping width / Clamping range. Drive sections. Slotted Cross-slotted PH. Cruciform PZ. Hexagon internal.
echnical Symbols 0 y N C M D! $ + m b n c o d p e r f M R N S O U R V Weight (total) Length (total) Length (total) Length (total) Length of blade Length of blade Width across flats (Nominal Width) Width
More informationWiha Tools. For all work on or around electrical components.
Wiha Tools For all work on or around electrical components. Wiha PicoFinish electric. The VDE-GS tested precision screwdriver. The smooth-running turn-cap enables fast turning. Imprint with the screw symbol
More informationSONIC GM Express Service Tool Kit*
SONIC GM Express Service Tool Kit* Drawer 1 E107901 Empty Foam for the 26" SFS 79pcs 1/4" Combination Socket Set & Screwdrivers 1 ea 1310 Screwdriver, PH.0 1 ea 1311 Screwdriver, PH.1 1 ea 1312 Screwdriver,
More informationAllen keys, spanners. T-Handle socket wrenches 1000 V. Right angle allen keys 1000 V. T-handle allen keys 1000 V. Cross type socket wrenches 1000 V
Allen keys, spanners T-Handle socket wrenches 1000 V chrome vanadium steel, full insulated, for hexagon nuts, DIN 7440, Right angle allen keys 1000 V chrome vanadium steel, for hexagon socket screws, full
More informationLIFETIME WARRANTY
102016 LIFETIME Superglue Gel Knee Pads Flashlights Packing Tape Duct Tape Blue Painter s Tape Vinyl Electrical Tape Teflon Tape Caution Tape Full Range Cutting Tools SIZE DECIMAL SIZE DECIMAL SIZE DECIMAL
More informationTerminal Can Wrench Discrete Connector Presser Plier No. 3 Square Tipped Driver Booth Wrench Security Tool
Speciality Tools Speciality Tools Terminal Can Wrench Discrete Connector Presser Plier No. 3 Square Tipped Driver Booth Wrench Security Tool 0000063993 PT-216C Terminal Wrench Can Wrench 7463027500 PT-891
More informationD Piece 12 Point Standard Metric Socket Set 4-12 mm List Price: $25.65 $16.99
D004000 11 Piece 6 Point Standard SAE Socket Set 5/32"-9/16" List Price: $32.46 $21.99 D004008 9 Piece 12 Point Standard Metric Socket Set 4-12 mm List Price: $25.65 $16.99 $77.99 D004005 25 Piece 6 Point
More informationWORKSHOP ESSENTIALS & TOOLS FOR HYBRID & ELECTRIC VEHICLES. Workshop Safety Vehicle Safety Personal Safety High Voltage Tools & Testers
WORKSHOP ESSENTIALS & TOOLS FOR HYBRID & ELECTRIC VEHICLES Workshop Safety Vehicle Safety Personal Safety High Voltage Tools & Testers Workshop Safety 6700 Set of 4 Posts, Bases and 25 Metre Chain Plastic
More informationAssortments and storage units
Assortments and storage units Tool Assortments Page 12 Roller Tool Cabinets, Tool Boxes, Accessories Page 28 Tool Modules Page 41 11 Tool Assortments WS-1M Tool Assortment suitable for Tool Cabinet ELORA-No.
More informationPowerful Brands from Wiha.
Powerful Brands from Wiha. Proturn 3K Proturn 1K www.wiha.com Wiha Proturn 3K. The Handy All-Rounder. The Wiha Proturn 3K is a screwdriver with a multi-component handle. Both industrial users as well as
More informationDIN DIN WRENCH COMBINATION WRENCH COMBINATION WRENCH SET DOUBLE OPEN END WRENCH
1 WRENCH COMBINATION WRENCH DIN 3113 Size (inch) Chrome plated Polished jaws and rings Chrome-Vanadium steel Hardened and tempered KW0100334 ¼ 105 x 15 x 5 20 KW0100335 5 /16 125 x 20 x 5 30 KW0100336
More informationPowerful Brands from Wiha. Proturn 3K Proturn 1K
Powerful Brands from Wiha. Proturn 3K Proturn 1K Wiha Proturn 3K. The handy all-rounder. The Wiha Proturn 3K is a screwdriver with a multi-component handle. Users in both industry and DIY appreciate the
More information1000 V INSULATED SCREWDRIVER RANGE
1000 V INSULATED NEW! SCREWDRIVER RANGE Individually tested, VDE insulation up to 1000 V, according to EN 60900/IEC 60900 Large diameter handle for excellent torque transmission and grip. Ergonomic handle
More informationWiha new products brochure 2011.
Wiha new products brochure 2011. Valid from 1.3.2011 Wiha Content. DynamicJoint Wiha slimtechnology Maximum cutting performance Up to 40% less force required for cutting Long life maximum cutting quality!
More information06 Screwdrivers and bits
06 Screwdrivers and bits Magnetic bit Insert bit 109 112 holder Go through Bit set 113 115 screwdriver Bit holding Screwdriver 116 Screwdrivers set 118 120 driver Precision screwdriver 122 Insulated screwdriver
More informationIndustrial Equipment CONTENT Hand Tools 703 Hydraulic Tools 731 Wash Down and Cleaning 743
Industrial Equipment CONTENT 2 3 Hand Tools 703 Hydraulic Tools 73 Wash Down and Cleaning 743 7 702 www.pirtek.com Industrial Equipment HAND TOOLS PRODUCT INDEX Pirtek offer a comprehensive range of tools
More informationSCREWDRIVER SETS 8 PIECE FLARED & POZIDRIV SCREWDRIVER SET PIECE TORX SCREWDRIVER SET 8 PIECE 1000 VOLT INSULATED SCREWDRIVER SET
Quality Since 1908 SCREWDRIVER SETS 8 PIECE FLARED & POZIDRIV SCREWDRIVER SET Slotted Tips: 3.5x75, 4x100, 5.5x100, 6.5x150, 8x150 Pozidriv Tips: Pz1x100, Pz2x125, Pz0x75 26.35 11.26 List Price 37.61 Ref:
More informationVoice/Data/ Video Tools
Voice/Data/ Video Tools Professionals prefer Klein's high quality materials and construction for durable long-lasting tools. Klein VDV Tools provide time savings and reliability, especially in high-volume
More informationHAND TOOLS GUARANTEED TO PERFORM. Trusted by Professionals Since
GUARANTEED TO PERFORM Trusted by Professionals Since 1977 www.sunextools.com SUNEX TOOLS WARRANTY PROGRAM Sunex Tools Sockets, Wrenches, Screwdrivers, Specialty Tools, and Vises carry a LIFETIME warranty
More informationexclusively represented in the USA by:
exclusively represented in the USA by: Price List 2015 Terms of Delivery and Payment Number 1 IN CUSTOMER SERVICE! Here s why: NO MINIMUM ORDERS, NO STOCKING REQUIREMENTS, NO DROP SHIP FEES We don t believe
More informationHVAC PLUMBING TOOLS CATALOG 2019 F-1. PIPE cutters. Excellent for cutting tubing insulation Strong nylon handle
hand tools PIPE cutters Excellent for cutting tubing insulation Strong nylon handle Ratchet action 1-5/8-Inch capacity Heat treated blade 36101 Little Tubing Cutter EA 10 36102 2 Replacement Blades PK
More informationMeasuring tools. Accuracy in measurement. Test-safe use. Multiple versions. Torque wrenches. Vernier calipers Spirit levels Mason s profiles
Measuring tools Torque wrenches Vernier calipers Spirit levels Mason s profiles Try squares Feeler gauges Other measuring tools Measuring tapes Accuracy in measurement Measuring tapes, torque wrenches
More information1.Water proof and dust proof 2.Simple,quick installation 3.compatible with MC4 solar connector 4.competitive price
MC 4 Connector 1.Water proof and dust proof 2.Simple,quick installation 3.compatible with MC4 solar connector 4.competitive price Technical data: Insulation material:pc Rated current:30a Rated voltage:1000v
More informationSpring Special. 1 October - 30 November 2012 GLFS0012 R R GLFS0008. Micro - Tec
Spring Special *All Prices Incl VAT* E&OE 1 October - 30 November 2012 MSS9600 61pc Tool Set R2 502.00 1/2 Socket Sizes (12 Point): 8 10 11 12 13 14 15 16 17 18 19 20 21 22 24 27 30 32 1/2 Reversible Ratchet
More informationWire Piercing Guide Heavy Duty Circuit Tester 6, 12, 24 Volt Professional Circuit Tester 6, 12 Volt
ELECTRICAL SERVICE Wire Piercing Guide 302003 n Quickly and easily guides tester probe into the centre of vehicle electrical wires n Eliminates stabbing of fingers when piercing wires n Holds the circuit
More information04 Spanners and Wrenches
04 Spanners and Wrenches ouble open end spanner 73 Open slogging wrench 75 Combination Insulated wrench 75 76 spanner Offset ring spanner 78 Ring slogging wrench 80 Flat ring spanner 81 Offset ratchet
More informationThreaded rod cutters. Trapezoid-sheet pliers TOOLS. Field of application Very simple cutting of threaded rods on site
Threaded rod cutters Very simple cutting of threaded rods on site Cuts galvanised threaded rods in the qualities 4.6 and 5.8 No reworking of the threaded rods necessary Clean cut allows the nuts to be
More informationVDE INSULATED SAFETY TOOLS + + VDE SPECIAL PURPOSE USE + + UP TO 1000 V SERVICE / FEATURES VDE SPANNERS
500 VDE INSULAED SAFEY OOLS + + VDE SECIAL UROSE USE + + U O 1000 V SERVICE / FEAURES 502-503 VDE SANNERS 504 VDE ORQUE WRENCHES 504 VDE SOCKES + ACCESSORIES 505 VDE SCREWDRIVER 506 VDE LIERS 506-511 VDE
More information2011 Cat Hand Tools and Shop Supplies
2011 Cat Hand Tools and Introduction................................................................................................................................ 1-1 Hand Tools Section Index...................................................................................................
More informationBlue-coated tools NFE
v p. t t Blue-coated tools NFE 74 400 p. 147 p. 147 p. 147 p. 147 p. 147 p. 148 p. 148 p. 148 p. 148 p. 148 p. 149 p. 149 p. 149 p. 149 p. 149 p. 150 p. 150 p. 150 p. 150 p. 150 p. 150 p. 151 p. 151 p.
More informationScrewdrivers. Crimped conductors can be fastened in the corresponding connection chamber either by the direct plug-in technique or by means of screws.
rimped conductors can be fastened in the corresponding connection chamber either by the direct plug-in technique or by means of screws. Electric screwdrivers Weidmüller screwdrivers are ideal one-hand
More informationexclusively represented in the USA by:
exclusively represented in the USA by: 2013 Terms of Delivery and Payment Number 1 IN CUSTOMER SERVICE! Here s why: NO MINIMUM ORDERS, NO STOCKING REQUIREMENTS, NO DROP SHIP FEES We don t believe in minimum
More informationGeneral Maintenance Tool Kit (GMTK) Drawer layout
26 2 8 6 5 32 31 35 25 11 9 33 7 24 23 22 28 21 20 27 19 18 17 34 16 15 10 14 13 12 4 3 30 1 General Maintenance Tool Kit (GMTK) Drawer layout COMP # DESCRIPTION BRAND PART NO. WARRANTY 1-3/16 Drawer,
More informationAdjustable wrenches. Filter and oil drain plugs wrenches. Safety cut
Wrenches Open end wrenches Combination wrenches Offset ring wrenches Slogging wrenches Adjustable wrenches T-handle wrenches Hexagon wrenches Filter and oil drain plugs wrenches Hook wrenches Long lifespan
More informationWORKSHOP 1429, 839, NEW SELECTION 2018 / EN. gedore.com. from. WSL-M-TS-172 TOOL TROLLEY WORKSTER with tool assortment 172 pieces
WORKSHOP SELECTION 2018 / EN WSL-M-TS-172 TOOL TROLLEY WORKSTER with tool assortment 172 pieces 839, from 1429, NEW 1507 XL MOBILE WORKBENCH with extra-wide drawers gedore.com WORKSHOP GEDORE MODULE SYSTEM
More informationVRHUNSKI NJEMAČKI IZOLIRANI ALATI ISO GERMANY S A F E T Y - T O O L S
VRHUNSKI NJEMAČKI IZOLIRANI ALATI ISO GERMANY S A F E T Y - T O O L S Dear customer, In the year 2006 we celebrate our 30th Company Anniversary. This is an opportunity to look back to what we have achieved
More informationStanley Hand tools Features & benefits stanley Fatmax screwdrivers. 11 piece stanley Fatmax screwdriver set
Stanley Hand tools Features & benefits stanley Fatmax screwdrivers Ergonomically designed tri-lobular handle provides more torque than traditional-style screwdrivers for less effort. High strength polypropylene
More informationRecoverXLT Refrigerant Recovery Machine
RecoverXLT Refrigerant Recovery Machine Liquid and Vapor Recovery Set Up Liquid recovery is the fastest method, but not all equipment can handle the process Vapor recovery is slower than liquid recovery,
More informationEXPERT by FACOM provides an affordable solution to all industrial and automotive professionals.
2 EXPERT by FACOM provides an affordable solution to all industrial and automotive professionals. Accurate and safe EXPERT tools are designed, developed and produced by FACOM s R&D teams to meet the professionals
More informationTools and ferrules. Contents. Tools and ferrules. Tools and ferrules J.1
Contents Cutting, stripping and crimping tools.2 Rechargeable and electric torque screwdriver.10 Screwdrivers.12 Wire end ferrules / Insulated cable lugs.21 Wire end ferrules with plastic collar.22 Twin-wire
More informationWRENCHES 12 PIECE RATCHETING COMBINATION WRENCH SET PIECE COMBINATION WRENCH SET PIECE OPEN JAW WRENCH SET
WRENCHES 12 PIECE RATCHETING COMBINATION Contains sizes 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18 & 19mm 72 tooth mechanism for 5 minimum working arc Manufactured from chrome vanadium steel and heat treated
More informationAM2 Sliding Bevels Quantity Boxed P3350 Rosewood 7.1/2" 1 6 P3375 Rosewood 10.1/2" 1 6 P P3320 P3320 Polished Hardwood Mini 1 6
AM2 Sliding Bevels Quantity Boxed P3350 Rosewood 7.1/2" 1 6 P3375 Rosewood 10.1/2" 1 6 P3350 - P3320 P3320 Polished Hardwood Mini 1 6 AM9 Brick Jointer Quantity Boxed G1800 G1800 1 6 F3200 AM4 Brushes
More informationAUTOMOTIVE / INDUSTRY
MARYAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329 web: http://mdmetric.com email: sales@mdmetric.com RFQ form: http://mdmetric.com/rfq.htm
More informationMOBILITY 429, 1549, NEW SELECTION 2018 / EN. gedore.com BASIC TOOL SET in case, 74 pieces
MOBILITY SELECTION 2018 / EN NEW 1041-1 BASIC TOOL SET in case, 74 pieces 429,. 1110 WMW-S-03 TOOL ASSORTMENT for WORKMO B3 110 pieces 1549, gedore.com MOBILITY GEDORE WORKMO THE MOBILE ORDERLY ARRANGEMENT,
More informationTOOLS TO FIRE YOUR EMOTION! V4951 Ratcheting open-end wrench set. V Socket set. Closed solid steel ratchet V4944
TOOLS TO FIRE YOUR EMOTION! 2017-05-01 2017-08-1 V4951 Ratcheting open-end wrench set Hot Innovation! Closed solid steel ratchet V241 7 8 Socket set Hot Price! V4944 V494 HOT17-1/EN/NO/9 7 Valid until:
More informationSPC-P Smart Power Connection with Temperature Monitoring Transmitter Pipe Mounted Installation Instructions
SPC-P Smart Power Connection with Temperature Monitoring Transmitter Pipe Mounted Installation Instructions SPC-P with Pyrotenax MI heating cable using required MI cable grounding kit SPC-P with Raychem
More informationHandle: 20" Chain: 25"
JTC-1147 6" CHAIN WRENCH Handle: 6" Chain: 18" (400mm) Handle: 20" Chain: 25" JTC-1149 20" CHAIN WRENCH JTC-1150 12" STRAP WRENCH Handle: 12" Strap length: 36" JTC-1355 EUROPEAN DOOR HINGE / HANDLE KIT
More informationA* CHAIN HOOKS, 1/4" EA A* CHAIN HOOKS, 5/16" EA A* BELT, SANDER 120 GRIT EA 3" X 24" A* BELT, SANDER 120
HAND TOOLS A*0000080001 ROPE, NYLON 1/4" FT A*0000080002 ROPE, MANILLA 1/2" FT A*0000080003 DOWELL RODS 1/4" EA A*0000080004 DOWELL RODS 3/8" EA A*0000080005 DOWELL RODS 1/2" EA A*0000080006 DOWELL RODS
More informationRECA VISO Assortments
Clear plastic lids: Easy viewing of product and stock. Ergonomically designed handle: comfortable to carry and use. Stackable without slipping: the base and the lids fit into one another. RECA VISO Cabinets
More informationSTEERING AND SUSPENSION section 2
STEERING AND SUSPENSION section TRRT-PC piece Track Rod Removal Tool Kit Quality, kit designed for easy removal and installation of ball joints on track rods. Knurled handle provides extra grip and three
More informationCATALOGUE SHOP ONLINE NOW
CATALOGUE 2018 SHOP ONLINE NOW Avex has been supplying the aircraft industry since our inception in 1965 and has grown to be the single most comprehensive supplier of aviation tooling since 1994. The Avex
More information14 Miscellaneous tools
14 Miscellaneous tools Bench vice 249 Suction lifter 251 Telescopic 252 mirror Wire guide 252 Puller 254 Multi-tool 257 Riveter 258 Oil filter wrench 260 Electric welder 261 Mortar Glue gun 261 Caulking
More informationJBS-100-STB Single Entry Power Connection with Junction Box Installation Instructions
JBS-100-STB Single Entry Power Connection with Junction Box Installation Instructions Description The JBS-100-STB is a NEMA 4X rated power connection kit. It is designed for use with Raychem BTV-CR, BTV-CT,
More informationKNIPEX Quality Made in Germany
KNIPEX Quality Made in Germany Preisliste Price list 2018 / 19 KNIPEX We live pliers. For 135 years and over four generations, we have been working passionately to be the best manufacturer of pliers for
More informationJBS-100-A, A6 SINGLE ENTRY POWER CONNECTION WITH JUNCTION BOX INSTALLATION INSTRUCTIONS
JBS-100-A, A6 SINGLE ENTRY POWER CONNECTION WITH JUNCTION BOX INSTALLATION INSTRUCTIONS DESCRIPTION The JBS-100-A and JBS-100-A6 are NEMA 4X-rated power connection kit. It is designed for use with Raychem
More informationElectrical Safety Products For Safe Working on Electric and Hybrid Vehicles
Electrical Safety Products For Safe Working on Electric and Hybrid Vehicles PPE Insulating Glove Kit 1000V Cotton knitted inner glove liners. Insulated gloves 1000V AC 1500V DC Class 0 IEC 60903. Cowhide
More informationJBM-100-STB NEMA 4X-rated connection kit Installation Instructions
JBM-100-STB NEMA 4X-rated connection kit Installation Instructions Power Connection, Powered Splice, Powered Tee, Dual Power Connection, Splice or Tee with Junction Box Approvals Hazardous Locations CLI,
More informationDielectric Footwear. From WORKMASTER
Dielectric Footwear From WORKMASTER High-Voltage Risks Electrical power plays an important role in modern society. We take it for granted and rarely think that it is dangerous, but contact with electric
More information7 Piece 3/8 Dr. SAE Hex Head Socket Set
Reversible Ratchets with Acetate Handle Nº of Drive Teeth Length List 10836 1/4" 36 6¹ ₂ $63.47 $42 95 20840 3/8" 40 9 $94.72 $63 95 31840 1/2" 40 11⁵ ₁₆ $99.83 $66 95 Mirror chrome finish for maximum
More informationAround the cable. Stripping.... convincing solutions
Around the cable Stripping... convincing solutions INFO Cable strippers How to use: For removing the exterior protective sleeve Junctions and distribution boxes For lengthwise and circular cuts Round PVC
More informationOur most competitively priced hand tools intended for light trade or serious DIY use, which are still covered by a lifetime guarantee*.
Our Ranges: Our most competitively priced hand tools intended for light trade or serious DIY use, which are still covered by a lifetime guarantee*. Our top-of-the-range hand tools suitable for the professional
More informationCIMCO cjenik Pakiranje (PAK): 0 = 1 kom / 1 = 50 kom / 2 = 100 kom / 3 = 250 kom / 4 = 1000 kom Šifra
97618 FOAM EMPTY 0 4024525976189 100 39269097 286 100000 DIAGONAL CUTTING NIPPERS 160 0 4021103999998 185 82032000 328 100024 Flatpliers VDE 160 MM 0 4021103000243 160 82032000 166 100030 LEAD SEAL PLIER
More informationTHAI PHATANASIN (CHIN SENG) CO.,LTD. บร ษ ท ไทยพ ฒนส น (จ นเส ง) จำ ก ด. Wrench & Torque Wrenches. 1/2 DR.Torque Wrench Set (11PCS) Torque Wrench
Wrench & Torque Wrenches Micrometer Adjustable Torque Wrench (Window DIsplay) Torque Wrench Chrome Vanadium Steel Ratchet Head Flip reverse ratchet action Spring ball socket retention and push-button quick
More informationTools and Accessories
Tools and Accessories Padlocks J1 - J6 Greases and Oils J7 - J8 AAR Terminal Wrenches Hand Tools J9 - J14 Switch Adjustment Wrenches Hand Tools J15 - J16 Torque Wrench Hand Tools J17 Crimping Pliers J18
More informationNEW PRODUCT OFFER PRICE SPECIAL OFFER OFFER PRICE LATEST MODELS, GREAT DESIGN NEW PRODUCT 27.
February 24th to April 17th 2014 Subject to VAT rate and stock availability S52677 T213100 less than half size ULTRA THIN OPEN SPANNER SET 7pc NORMAL SIZE ULTRA THIN Sizes: 6-7, 8-9, 10-11, 12-13, 14-15,
More informationCS Fiber Optic Splice Case. Instruction
3 2179-CS Fiber Optic Splice Case Instruction 2179-CS Fiber Optic Splice Case Description 1.0 General 1.1 The 3M 2179-CS Fiber Optic Splice Cases are closures that can be used in buried, underground, aerial,
More information3/8-Inch Torque Wrench Square Drive, Torque Range Of 30 to 250 Inch Pound (3.39 to NM)
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 57005 3/8" Torque Wrench Square Drive Klein Tools Catalog Number 57005 Manufacturer Klein Tools 3/8-Inch Torque Wrench
More informationNo. 4 CARPENTARY TOOLS HAND TOOLS ELECTRICAL TOOLS AN ISO 9001 : 2008 CERTIFIED COMPANY M IN
M4570910IN CARPENTARY TOOLS HAND TOOLS ELECTRICAL TOOLS No. 4 GARAGE TOOLS PLUMBER TOOLS PRICE LIST w.e.f. 1st Jan - 2016 HBH-BELTO Hacksaw Blade Special BC-BELTO CHISEL JHF-BELTO HACKSAW FRAME Thickness
More informationGENERAL CATALOGUE. Pliers MADE IN GERMANY SINCE 1882
GENERAL CATALOGUE Pliers MADE IN GERMANY SINCE 1882 Tool Assortment and Cases TOOL ASSORTMENT AND CASES Tool Roll 260 KNIPEX Minis 260 Pliers Sets in a foam tray 261 Tool Kits 262 Tool ag for electrical
More informationWrenches. Slogging wrenches Open ended impact slogging wrenches. Double flex wrenches. Ring type impact slogging wrenches.
Slogging wrenches Open ended impact slogging wrenches. Stock Size Length Width Height Price No mm mm mm mm 902024 24 178 14.5 2.4 22.50 902027 27 180 15.5 25.2 22.50 90200 0 190 16.2 0.0 27.50 90202 2
More informationSpanners. Spanners. Open-ended spanners DIN 3110 Chromium plated - < 15
Spanners Open-ended spanners IN 3110 Chromium plated - < 15 35201 Metric sizes 35301 Inch sizes 3,2 x 5,5 4 x 5 1/4 x 9/32 (6,3 x 7,1) 6 x 7 1/4 x 5/16 (6,3 x 7,9) 6 x 8 7 x 8 7 x 9 8 x 9 8 x 10 11/32
More informationWorking under tension. Personal protection equipment.... convincing solutions
Working under tension Personal protection equipment... convincing solutions 233 INFO HUPsafteygloves - insulating gloves Recommendation for use and maintenance Insulating gloves are made of natural latex,
More informationFerax newsletter
Ferax newsletter 2010-07 1 COMPRESSED AIR Quick couplings Quick couplings with hose connection Quick couplings with male thread Quick couplings with female thread Insert nipple with hose connection Insert
More informationALLTRADE & POWERBUILT NEW PRODUCT (SOME SHELF LIFT ITEMS)
AT-020014 IMPACT WRENCH 19.2V KAWASAKI 1\10 $59.00 11 AT-040013FC PLIERS SET 2PC X-DUAL HEAD (DISPLAY) 4-8\10 $7.95 253 AT-150017 UTILITY KNIFE, FOLDING, QUICK RELEASE (DISPLAY) 20- $2.95 99 AT-150030
More informationTrail Rocker Installation
Trail Rocker Installation Instructions Customizable Trail Rocker Control System For Installing Painless Part Number: 57100 Manual #90616 Painless Performance Products recommends you, the installer, read
More informationTHE NEW ETHOS EDGE! THE TOOL FOR ALL TECHS JUST GOT MORE POWERFUL! LET S DO A TRADE! ASK ME FOR A DEMO!
THE NEW ETHOS EDGE! THE TOOL FOR ALL TECHS JUST GOT MORE POWERFUL! NEW EDGE STYLING WITH THE LATEST GENERATION DIAGNOSTIC SOFTWARE FASTER OPERATION 5 SECOND BOOT UP LETS YOU GET TO WORK FAST! STEADY CHARGE
More information:45 Pagina 5 Clamping
Clamping Clamping Wrenches The Original Heavy-Duty Pipe Wrench Ridge Tool, the world s leading manufacturer of pipe working tools, produces today millions of pipe wrenches with types and sizes to fit every
More informationHEV Workstation Index
HEV Workstation Index August 2017 Place this Index in Drawer 3 of the HEV Workstation. To Order Special Service Tools Call Bosch/OTC at 1-800-933-8335 304212_HEV_indexCVR.indd 2 8/11/17 3:58 PM Table
More informationSafe & Convenient. NEW line of tools with Snap-in sensor detects AC voltage without contacting live wires. Audible Visual. Wire Strippers.
Safe & Convenient NEW line of tools with Snap-in sensor detects AC voltage without contacting live wires Wire Strippers NEW SNAP-IN SENSOR Work Lights Audible Visual Screwdrivers Pliers Electrician s Knives
More informationInstallation Instructions Z-Gate Shifter
Installation Instructions Z-Gate Shifter Part Number 80681 1998, 2001 by B&M Racing and Performance Products The B&M Z-Gate shifter can be used in vehicles equipped with most popular three speed automatic
More informationScrewdrivers 300
112 116 120 130 133 136 141 143 144 148 149 151 Screwdrivers 300 Industrial Plus Series The Industrial Plus series is specially developed for the toughest jobs. The handle is composed by an anti-slip thermoplastic
More information14 Piece 1/4" Dr. Standard
25507A 7 Piece 3/8 Dr. SAE U-Joint Socket Set 3/8" - 3/4" 6 Pt., Mirror chrome finish for maximum resistance against corrosion. Made of premium tool steel and precision heat-treated for maximum durability.
More information$ Ex. GST $
SALE ENDS 31/12/08 LOOK INSIDE FOR MORE GREAT GIFT IDEAS! Apprentice Tool Chest 151 Piece 6 Drawer This fantastic 151 Piece Apprentice Tool Kit is ideal for the New Apprentice Including all the tools you
More informationTools. That. Work. Catalogue. Proudly Distributed by:
Tools That Work 2019 Catalogue EFFECTIVE 1 ST November 2018 Proudly Distributed by: For the past 50 years, Bondhus has established itself within the market as the premium hex key supplier for both quality
More information