GEN2 SiC Schottky Diode. Description. SiC Schottky Diode. Features. Applications. Environmental
|
|
- Mariah Allen
- 6 years ago
- Views:
Transcription
1 GEN2 LSIC2SD12A8, LSIC2SD12C8, 12 V, 8 A, A, TO-252-2L TO-22-2L(DPAK) LSIC2SD12C8 RoHS Pb Description This series of silicon carbide (SiC) Schottky diodes has negligible reverse recovery current, high surge capability, and a maximum operating junction temperature of 175 C. These diodes series are ideal for applications where improvements in efficiency, reliability, and thermal management are desired. Features Positive temperature coefficient for safe operation and ease of paralleling 175 C maximum operating junction temperature Excellent surge capability Extremely fast, temperature-independent switching behavior Dramatically reduced switching losses compared to Si bipolar diodes Circuit Diagram TO-252-2L ( DPAK ) Case Applications Boost diodes in PFC or DC/DC stages Switch-mode power supplies Uninterruptible power supplies Solar inverters Industrial motor drives EV charging stations Pin 1 Pin Environmental Littelfuse RoHS logo = RoHS conform RoHS Littelfuse HF logo = Halogen Free Littelfuse PB-free logo = Pb-free lead plating Pb Maximum Ratings Characteristics Symbol Conditions Value Unit Repetitive Peak Reverse Voltage RM - 12 V DC Blocking Voltage T j = 25 C 12 V T = 25 C 24.5 C Continuous Forward Current I F = 135 C 12 A = 154 C 8 Non-Repetitive Forward Surge Current I FSM = 25 C, T P = 1 ms, Half sine pulse 65 A T Power Dissipation C = 25 C 125 P Tot = 11 C 54 W Operating Junction Temperature T J to 175 C Storage Temperature T STG to 15 C Soldering Temperature T sold - 26 C 217 Littelfuse, Inc.
2 GEN2 LSIC2SD12A8, LSIC2SD12C8, 12 V, 8 A, A, TO-252-2L TO-22-2L(DPAK) Electrical Characteristics Characteristics Symbol Conditions Value Min. Typ. Max. I Forward Voltage F = 8 A, T J = 25 C V F I F = 8 A, T J = 175 C Unit V V Reverse Current R = 12 V I, T = 25 C - <1 1 J R μa = 12 V, T = 175 C - 1 J Total Capacitance C = 1 V, f =1 MHz = 4 V, f = 1 MHz = 8 V, f = 1 MHz Total Capacitive Charge Q C = 8 V, nc Footnote: T J = +25 C unless otherwise specified Thermal Characteristics Qc = C(V)dV pf Value Characteristics Symbol Conditions Unit Min. Typ. Max. Thermal Resistance R θjc C/W Figure 1: Typical Foward Characteristics Figure 2: Typical Reverse Characteristics 16 1E-4 Forward Current (A) T J = - 55 C T J = 25 C T J = 125 C T J = 15 C T J = 175 C Reverse Current, I R (A) 1E-5 1E-6 1E-7 T J = 175 C T J = 15 C Forward Voltage (V) 1E-8 T T J = 125 C J = 25 C Reverse Voltage, (V) 217 Littelfuse, Inc.
3 GEN2 LSIC2SD12A8, LSIC2SD12C8, 12 V, 8 A, A, TO-252-2L TO-22-2L(DPAK) Figure 3: Power Derating 14 Figure 4: Current Derating 1 Maximum Power (W) Forward Current (A) % Duty 3 % Duty 5 % Duty 7 % Duty DC Case Temperature ( C ) Case Temperature ( C ) Figure 5: Capacitance vs. Reverse Voltage Figure 6: Capacitive Charge vs. Reverse Voltage Capacitance (pf) Capaci ve Charge (nc) Voltage (V) Voltage (V) 217 Littelfuse, Inc.
4 GEN2 LSIC2SD12C8, LSIC2SD12A8, 12 V, 88 A, A, TO-252-2L TO-22-2L(DPAK) Figure 7: Stored Energy vs. Reverse Voltage Figure 8: Transient Thermal Impedance Stored Energy (uj) Voltage (V) Normalized Transient Thermal Impedance 1E E Single 1E-2 1E-3 1E-6 1E-5 1E-4 1E-3 1E-2 Pulse Width (s) 1E-1 1E+ Part Numbering and Marking System Packing Options SIC2SD12C8 L F YYWWD ZZZZZZ-ZZ SIC = SiC Diode 2 = Gen2 SD = Schottky Diode 12 = Voltage Rating (12 V) C = TO Lead Package 8 = Current Rating ( 8 A) YY = Year WW = Week D = Special code (fixed) ZZZZZZ-ZZ = Lot Number Part Number Marking Packing Mode M.O.Q LSIC2SD12C8 SIC2SD12C8 Tape and Reel Littelfuse, Inc. Revised: 11/15/17
5 GEN2 LSIC2SD12A8, LSIC2SD12C8, 12 V, 8 A, A, TO-252-2L TO-22-2L(DPAK) Dimensions TO-252-2L (DPAK) D L4 E b3 L3 e 2x b 2x SEE DETAIL "C" NOTE: - L4- MAXIMUM PLASTIC PROTRUSION. - L2- REFERENCE FOR FOOT LENGTH MEASUREMENT. Recommended Solder Pattern Layout UNIT: mm A c2 A1 c H DETAIL "C" L2 P E1 L D1 Symbol Inches Millimeters Min Nom Max Min Nom Max A A b b c C D D E E e.9 BSC 2.29 BSC H L L2.1 BSC.25 BSC L L P Carrier Tape & Reel Specification TO-252-2L (DPAK) 217 Littelfuse, Inc.
6 GEN2 LSIC2SD12C8, LSIC2SD12A8, 12 V, 8 A, A, TO-252-2L TO-22-2L(DPAK) Carrier Tape & Reel Specification TO-252-2L (DPAK) Disclaimer Notice - Littelfuse products are not designed for, and shall not be used for, any purpose (including, without limitation, automotive, military, aerospace, medical, life-saving, life-sustaining or nuclear facility applications, devices intended for surgical implant into the body, or any other application in which the failure or lack of desired operation of the product may result in personal injury, death, or property damage) other than those expressly set forth in applicable Littelfuse product documentation. Warranties granted by Littelfuse shall be deemed void for products used for any purpose not expressly set forth in applicable Littelfuse documentation. Littelfuse shall not be liable for any claims or damages arising out of products used in applications not expressly intended by Littelfuse as set forth in applicable Littelfuse documentation. The sale and use of Littelfuse products is subject to Littelfuse Terms and Conditions of Sale, unless otherwise agreed by Littelfuse. Information furnished is believed to be accurate and reliable. However, users should independently evaluate the suitability of and test each product selected for their own applications. Littelfuse products are not designed for, and may not be used in, all applications. Read complete Disclaimer Notice at Littelfuse, Inc.
Description. Features. Applications. Environmental. Characteristics Symbol Conditions Value Unit Repetitive Peak Reverse Voltage V RRM.
LSIC2SD12C1, 12 V, 1 A, TO-252-2L (DPAK) LSIC2SD12C1 RoHS Pb Description This series of silicon carbide (SiC) Schottky diodes has negligible reverse recovery current, high surge capability, and a maximum
More informationLSIC2SD065C06A 650 V, 6 A SiC Schottky Barrier Diode
LSICSD065C06A 650 V, 6 A SiC Schottky Barrier Diode Description This series of silicon carbide (SiC) Schottky diodes has negligible reverse recovery current, high surge capability, and a maximum operating
More informationGEN2 SiC Schottky Diode LSIC2SD120E40CC, 1200 V, 40 A, TO-247-3L. Description. SiC Schottky Diode. Features. Applications.
LSIC2SD12E4CC RoHS Pb Description This series of silicon carbide (SiC) Schottky diodes has negligible reverse recovery current, high surge capability, and a maximum operating junction temperature of 175
More informationLSIC2SD065A20A 650 V, 20 A SiC Schottky Barrier Diode
LSIC2SD065A20A 650 V, 20 A SiC Schottky Barrier Diode RoHS Pb Description This series of silicon carbide (SiC) Schottky diodes has negligible reverse recovery current, high surge capability, and a maximum
More informationLSIC2SD065E40CCA 650 V, 40 A SiC Schottky Barrier Diode
LSIC2SD065E40CCA 650 V, 40 A SiC Schottky Barrier Diode RoHS Pb Description This series of silicon carbide (SiC) Schottky diodes has negligible reverse recovery current, high surge capability, and a maximum
More informationGEN2 SiC Schottky Diode LSIC2SD120A20, 1200 V, 20 A, TO-220-2L. Description. SiC Schottky Diode. Features. Environmental
LSIC2SD12A2, 12 V, 2 A, TO-22-2L LSIC2SD12A2 RoHS Pb Description This series of silicon carbide (SiC) Schottky diodes has negligible reverse recovery current, high surge capability, and a maximum operating
More informationDescription. Features. Applications. Environmental. Characteristics Symbol Conditions Value Unit Repetitive Peak Reverse Voltage V RRM.
LSICSD1A5, 1 V, 5 A, TO--L LSICSD1A5 RoHS Pb Description This series of silicon carbide (SiC) Schottky diodes has negligible reverse recovery current, high surge capability, and a maximum operating junction
More informationLSIC2SD120A10. GEN2 SiC Schottky Diode LSIC2SD120A10, 1200 V, 10 A, TO-220-2L. RoHS. Description
LSIC2SD12A1 RoHS Pb Description This series of silicon carbide (SiC) Schottky diodes has negligible reverse recovery current, high surge capability, and a maximum operating junction temperature of 175
More informationDescription. Features. Applications. Environmental. Characteristics Symbol Conditions Value Unit Repetitive Peak Reverse Voltage V RRM.
LSICSD1A5 RoHS Pb Description This series of silicon carbide (SiC) Schottky diodes has negligible reverse recovery current, high surge capability, and a maximum operating junction temperature of 175 C.
More informationLSIC1MO120E V N-channel, Enhancement-mode SiC MOSFET
LSIC1MO120E0160 1200 N-channel, Enhancement-mode SiC MOSFET RoHS Pb Product Summary Characteristics alue Unit DS 1200 Typical R DS(ON) 160 mω I D ( T C 100 C) 14 A Circuit Diagram TO-247-3L Features *
More informationLSIC1MO170E V N-channel, Enhancement-mode SiC MOSFET
LSIMOE,, mohm, TO--L LSIMOE N-channel, Enhancement-mode Si MOSFET RoHS Pb Product Summary haracteristics alue Unit DS Typical R DS(ON) mω ( T ). A ircuit Diagram TO--L Features * * Body diode Optimized
More informationLSIC1MO120E V N-channel, Enhancement-mode SiC MOSFET
LSIMO2E2, 2, 2 mohm, TO-247-3L LSIMO2E2 2 N-channel, Enhancement-mode Si MOSFET RoHS Pb Product Summary haracteristics alue Unit DS 2 Typical R DS(ON) 2 mω I D ( T ) 8 A ircuit Diagram TO-247-3L Features
More information1SMA10CAT3G Series, SZ1SMA10CAT3G Series. 400 Watt Peak Power Zener Transient Voltage Suppressors. Bidirectional
110CAT3G Series, SZ110CAT3G Series 400 Watt Peak Power Zener Transient Voltage Suppressors Bidirectional The series is designed to protect voltage sensitive components from high voltage, high energy transients.
More informationNS6A5.0AFT3G, SZNS6A5.0AFT3G Series. 500 Watt Peak Power Zener Transient Voltage Suppressors. Unidirectional
OBSOLETE/EOL NS65.0FT3G, SZNS65.0FT3G Series DTE June/30/2018 PCN/ECN# LFPCN41246 REPLCED BY SM6L Series 500 Watt Peak Power Zener Transient Voltage Suppressors Littelfuse.com Unidirectional The NS6xxFT3G
More informationGas Discharge Tubes GTCC23-XXXM-R01-2 Series
Littelfuse Circuit Protection 3mm 2Pole Chip type GDTs (ceramic gas discharge tubes), are commonly used to help protect sensitive telecom equipment such as communication lines, signal lines and data transmission
More informationSpecification Status: Released
PAGE NO.: 1 of 9 Specification Status: Released BENEFITS ESD protection for high frequency applications (HDMI 1.3) Smaller form factor for board space savings Helps protect electronic circuits against
More informationSpecification Status: Released
PAGE NO.: 1 OF 9 Specification Status: Released BENEFITS ESD protection for high frequency applications (HDMI 1.3) Smaller form factor for board space savings Helps protect electronic circuits against
More informationCHIPSESD DEVICES BENEFITS APPLICATIONS FEATURES
CHIPSES EVICES Littelfuse s ChipSES family of Silicon ES devices, available in EIA-0201 and EIA-0402 sized rectangular SMT passive component packages, can help protect electronic circuits against damage
More informationGasDischarge Tubes GTCX28-XXXM-R10 Series
GasDischarge Tubes Littelfuse Circuit Protection 8mm 2Pole GDTs (ceramic gas discharge tubes), are commonly used to help protect sensitive telecom equipment such as communication lines, signal lines and
More informationGas Discharge Tubes GTCX25-XXXM-R02 Series
Littelfuse Circuit Protection 5mm 2Pole GDTs (ceramic gas discharge tubes), are commonly used to help protect sensitive telecom equipment such as communication lines, signal lines and data transmission
More informationMAC12D, MAC12M, MAC12N. Triacs. Silicon Bidirectional Thyristors. TRIACS 12 AMPERES RMS 400 thru 800 VOLTS
MAC2D, MAC2M, MAC2N Triacs Silicon Bidirectional Thyristors Designed for high performance fullwave ac control applications where high noise immunity and commutating di/dt are required. Features Blocking
More informationAC4DLM. Sensitive Gate Triacs. Silicon Bidirectional Thyristors TRIACS 4.0 AMPERES RMS 600 VOLTS
Sensitive ate Triacs Silicon Bidirectional Thyristors Designed for high volume, low cost, industrial and consumer applications such as motor control; process control; temperature, light and speed control.
More informationGTCX35-XXXM-R05 Series
Littelfuse Circuit Protection 5mm 3Pole GDTs (ceramic gas discharge tubes), are commonly used to help protect sensitive telecom equipment such as communication lines, signal lines and data transmission
More informationSpecification Status: Released
PAGE NO.: 1 OF 7 Termination Material: Copper, Ni, Tin Fuse Element: Copper/Copper alloy Body Material: Fiberglass/Epoxy Operating Temperature -55 C to +125 C (with de-rating) Specification Status: Released
More informationSPECIFICATIONS, PACKAGING INFORMATION, AGENCY APPROVALS AND PART NUMBERING SYSTEMS FOR TABLE F2 FUSES
SPECIFICATIONS, PACKAGING INFORMATION, AGENCY APPROVALS AND PART NUMBERING SYSTEMS FOR TABLE F2 FUSES Table F1 Environmental Specifications for Table F2 Fuses Operating Temperature Mechanical Vibration
More informationSURFACE-MOUNT FUSES Slow-Blow Chip Fuses
SURFACE-MOUNT FUSES Available in industry standard 206 and 0603 chip sizes, Littelfuse slow-blow chip fuses help provide overcurrent protection on systems that experience large and frequent current surges
More informationSpecification Status: Released
PAGE NO.: 1 OF 9 Specification Status: Released GENERAL DESCRIPTION Littelfuse PolyZen devices are polymer enhanced, precision Zener diode microassemblies. They offer resettable protection against multi-watt
More informationSpecification Status: Released
PAGE NO.: OF 8 Specification Status: Released GENERAL DESCRIPTION Littelfuse PolyZen devices are polymer enhanced, precision Zener diode microassemblies. They offer resettable protection against multi-watt
More informationTVS Diode Arrays (SPA Diodes) SP2502L Series 3.3V 75A Diode Array. Lightning Surge Protection - SP2502L Series. RoHS Pb GREEN.
SP202L Series 3.3V 7A Diode Array RoHS Pb GREEN Description The SP202L provides overvoltage protection for applications such as 0/00/000 Base-T Ethernet and T3/ E3 interfaces. This device has a low capacitance
More informationSURFACE-MOUNT FUSES Slow-Blow Chip Fuses
SURFACE-MOUNT FUSES Available in industry standard 206 and 0603 chip sizes, Littelfuse slow-blow chip fuses help provide overcurrent protection on systems that experience large and frequent current surges
More informationGAS DISCHARGE TUBES (GDTS)
GAS DISCHARGE TUBES (GDTS) Littelfuse's GDTs (Gas Discharge Tubes) are placed in front of, and in parallel with, sensitive telecom equipment such as power lines, communication lines, signal lines and data
More informationSPF SERIES SOLAR FUSES
Vdc - A Specifications Voltage Rating VDC Amperage Rating,,,.,,,,, 0,,,,, Max. Interrupting Rating ka - A - A ka - A - A Time Constant ms Material Body: Melamine Caps: Copper Alloy Approvals UL - Listed
More informationRev.A0
PRIMARY CHARACTERISTICS SMB(DO-214AA) PACKAGE P D V Z 3W 6.2V~200V T J,Max 150 Body Marking Example Marking : Please See Page 2~3 Ex : SMB3EZ5.6D5 Logo Date Code 3H6 VYM Cathode Band Marking Code FEATURES
More informationAQHV Series 200W Discrete Unidirectional TVS Diode
AQHV Series W Discrete Unidirectional TVS Diode RoHS Pb GREEN Description The AQHV series is designed to provide an option for very fast acting, high performance over-voltage protection devices. Ideally
More informationPolySwitch Resettable PTCs Surface Mount > LoRho Series. Low Rho SMD Series. Description
Low Rho SMD Series Description PolySwitch low resistivity SMD (surface-mount device) is a versatile device well suited for general applications which have space-constrained, low power dissipation and high
More informationSURFACE-MOUNT FUSES Pulse Tolerant Chip Fuses
SURFACE-MOUNT FUSES have high inrush current withstand capability and provide overcurrent protection for DC power systems. These devices combine a silver fusing element and monolithic, multilayer design
More informationGBPC15,25,35- Series. Features: Page <1> 10/08/10 V1.1
Features: Plastic material. Integrally moulded heatsink provide very low thermal resistance for maximum heat dissipation. Surge overload ratings from 300 to 400 amperes. Terminals solderable per MIL-STD-202,
More informationKLKD SERIES 10x38 FUSES
KLKD SERIES 0x FUSES 0 Vac/dc /0- A Fast Acting Description The KLKD fuse series is fast-acting with a high DC voltage rating. This family of Midget style fuses (0 x mm) is used in solar combiner boxes
More informationSM24CANB Series 500W TVS Diode Array
SM4CANB Series 5W TVS Diode Array RoHS Pb GREEN Description The SM4CANB TVS Diode Array is designed to protect automotive Controller Area Network (CAN lines from damage due to electrostatic discharge (ESD,
More informationAQxxC Series 450W Discrete Bidirectional TVS Diode
AQxxC Series 5W Discrete Bidirectional TVS Diode RoHS Pb GREEN Description The bidirectional AQxxC series is designed to replace multilayer varistors (MLVs) in electronic equipment for low speed and DC
More informationMetal-Oxide Varistors (MOVs) Surface Mount Multilayer Varistors (MLVs) > MLA Automotive Series
MLA Automotive Varistor Series RoHS Description The MLA Automotive Series of transient voltage surge suppression devices is based on the Littelfuse Multilayer fabrication technology. These components are
More information1W, 10V - 200V Surface Mount Silicon Zener Diode
1W, 10V - 200V Surface Mount Silicon Zener Diode FEATURES Photo Glass passivated junction Ideal for automated placement Low inductance Typical IR less than 1μA above 11V Compliant to RoHS Directive 2011/65/EU
More information2A, 50V V Surface Mount Rectifier
2A, 50V - 400V Surface Mount Rectifier S2A - S2V FEATURES AEC-Q0 qualified Glass passivated junction chip Ideal for automated placement Low forward voltage drop High surge current capability Compliant
More informationSPHV-C Series 200W Discrete Bidirectional TVS Diode
SPHV-C Series W Discrete Bidirectional TVS Diode RoHS Pb GREEN Description The SPHV-C series is designed to replace multilayer varistors (MLVs) in portable applications, LED lighting modules, and low speed
More informationMHP-TAM DEVICES. Overtemperature Protection. For Lithium Polymer (LiP) and prismatic cells used in various portable electronic applications
MHP-TM EVIES Overtemperature Protection For Lithium Polymer (LiP) and prismatic cells used in various portable electronic applications MHP-TM EVIES Overtemperature Protection The rapidly expanding market
More informationMetal-Oxide Varistors (MOVs) Surface Mount Multilayer Varistors (MLVs) > MLN Series. MLN SurgeArray TM Suppressor. Description
MLN SurgeArray TM Suppressor RoHS Description The MLN SurgeArray Suppressor is designed to help protect components from transient voltages that exist at the circuit board level. This device provides four
More informationMS868C10. Schottky Barrier Diode. Maximum Rating and Characteristics. FUJI Diode
MS868C Schottky Barrier Diode Maximum Rating and Characteristics Maximum ratings (at Ta=25 C unless otherwise specified.) Item Symbols Conditions Ratings Units Repetitive peak surge reverse voltage VRSM
More informationBZX84CxxxET1G Series, SZBZX84CxxxET3G. Zener Voltage Regulators. 225 mw SOT 23 Surface Mount
BZX84CxxxETG Series, SZBZX84CxxxETG Series Zener Voltage Regulators 5 mw Surface Mount This series of Zener diodes is offered in the convenient, surface mount plastic package. These devices are designed
More informationIs Now Part of. To learn more about ON Semiconductor, please visit our website at
Is Now Part of To learn more about ON Semiconductor, please visit our website at www.onsemi.com Please note: As part of the Fairchild Semiconductor integration, some of the Fairchild orderable part numbers
More informationSM Series 400W TVS Diode Array
General Purpose ESD Protection - SM5 through SM3 SM Series W TVS Diode Array RoHS Pb GREEN Description The SM series TVS Diode Array is designed to protect sensitive equipment from damage due to electrostatic
More informationBZX84BxxxLT1G. BZX84CxxxLT1G Series, SZBZX84BxxxLT1G. SZBZX84CxxxLT1G Series. Zener Voltage Regulators. 250 mw SOT 23 Surface Mount
BZX84BxxxLTG, BZX84CxxxLTG, SZBZX84BxxxLTG, SZBZX84CxxxLTG Zener Voltage Regulators 50 mw Surface Mount This series of Zener diodes is offered in the convenient, surface mount plastic package. These devices
More informationItem Symbols Conditions Ratings Units Repetitive peak reverse voltage VRRM V Isolating voltage Viso Terminals-to-case, AC.
YG982S6R Low-Loss Fast Recovery Diode Maximum Rating and Characteristics Maximum ratings (at Ta=25 C unless otherwise specified.) Item Symbols Conditions Ratings Units Repetitive peak reverse voltage VRRM
More informationTransient Voltage Suppression Diodes SMTO ka > LTKAK6 series. Description. Features. Test Current I T. Reverse Breakdown Voltage (V BR I T
SMTO-218-6 ka > LTKAK6 series LTKAK6 Series RoHS Pb e3 Description The LTKAK6 series offers superior clamping characteristics over standard S.A.D. technologies by virtue of the Littelfuse Foldbak technology,
More information1.5KE SERIES Taiwan Semiconductor
Transient Voltage Suppressor FEATURES - Excellent clamping capability - Low dynamic impedance - 1500W surge capability at 10 / 0 μs waveform - Fast response time: Typically less than 1.0ps from 0 volt
More informationK3020P/ K3020PG Series
Optocoupler, Phototriac Output, 400 V V DRM K3020P/ K3020PG Series Features Isolation materials according to UL 94-VO Pollution degree 2 (DIN/VDE 0110 resp. IEC 60664) Climatic classification 55/100/21
More informationChina - Germany - Korea - Singapore - United States - smc-diodes.com
TPK30KPXX TVS Rectifier Features SPD-4 Low profile surface mount Fast response Suppresses transients up to 30kW @ 10/1000µs and 200kW @ 8/20µs This is a Pb Free Device Open top for heat dissipation and
More informationESAD83M-004RR. Schottky Barrier Diode. Maximum Rating and Characteristics. FUJI Diode
ESAD83M-004RR Schottky Barrier Diode Maximum Rating and Characteristics Maximum ratings (at Ta=25 C unless otherwise specified.) Item Symbols Conditions Ratings Units Repetitive peak surge reverse voltage
More informationBZX84C2V4ET1 Series. Zener Voltage Regulators. 225 mw SOT 23 Surface Mount
BZX84CV4ET Series Zener Voltage Regulators 5 mw SOT Surface Mount This series of Zener diodes is offered in the convenient, surface mount plastic SOT package. These devices are designed to provide voltage
More information225 mw SOT 23 Surface Mount
225 mw SOT 23 Surface Mount This series of Zener diodes is offered in the convenient, surface mount plastic SOT 23 package. These devices are designed to provide voltage regulation with minimum space requirement.
More informationAUTOMOTIVE DEVICES QUICK REFERENCE GUIDE
AUTOMOTIVE DEVICES QUICK REFERENCE GUIDE Littelfuse PolySwitch devices for automotive applications offer overcurrrent, overvoltage, PCB trace fault, and thermal protection for your vehicle s sensitive
More informationYA875C10R (100V, 20A)
YA875C10R (100V, 20A) Ultra Low IR Schottky Barrier Diode Features Ultra Low IR Low VF Tj MAX = 175 C High reliability at higher temperatures Outline Drawings [mm] Connection diagram TO-220AB YA875C10
More informationDEVICES FOR BIPOLAR APPLICATIONS. For Bidirectional use C or CA suffix for types P4KE6.8 thru P4KE440
GPP TRANSIENT VOLTAGE SUPPRESSOR 4 WATT PEAK POWER 1. WATT STEADY STATE TVS P4KE SERIES FEATURES * Plastic package has underwriters laboratory * Glass passivated chip construction * 4 watt surage capability
More informationPORTABLE MEDICAL DEVICES PROTECTION QUICK REFERENCE GUIDE
PORTABLE MEDICAL DEVICES PROTECTION QUICK REFERENCE GUIDE Littelfuse overvoltage, overcurrent and overtemperature circuit help designers provide effective for portable medical products. PolySwitch surface-mount
More informationBZX84B4V7LT1, BZX84C2V4LT1 Series. Zener Voltage Regulators. 225 mw SOT 23 Surface Mount
BZX84B4V7LT, BZX84CV4LT Series Zener Voltage Regulators 5 mw SOT Surface Mount This series of Zener diodes is offered in the convenient, surface mount plastic SOT package. These devices are designed to
More information1.0A Low Profile Chip Schottky Rectifier TSCD12WSH-TSCD16WSH. Features. Application. Mechanical Data
1.0A Low Profile Chip Schottky Rectifier 1.0A Low Profile Chip Schottky Rectifier Features Lead less chip form, no lead damage Low profile with SMD package Low power loss, High efficiency High current
More informationMHP-TA RESETTABLE TCO DEVICE For Lithium Battery Protection
MHP-TA RESETTABLE TCO DEVICE For Lithium Battery Protection Littelfuse PolySwitch MHP-TA circuit protection device s thermal activation and other advanced features help provide a cost-effective, space-saving
More information1N5221B~1N5266B SILICON ZENER DIODES FEATURES MECHANICAL DATA MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS. VOLTAGE 2.4 to 68 Volt POWER 500 mwatt
SILION ZENER DIODES VOLTAGE 2.4 to 68 Volt POWER 500 mwatt FEATURES Planar Die construction 500mW Power Dissipation Ideally Suited for Automated Assembly Processes Lead free in compliance with EU RoHS
More informationFDRW40C120J(1200V, 40A)
FDRW40C20J(200V, 40A) Soft Recovery FRD Series Maximum Rating and Characteristics Maximum Ratings (at Ta=25 C unless otherwise specified.) Item Symbol Conditions Ratings Units Repetitive peak reverse voltage
More informationNC7SP17 TinyLogic ULP Single Buffer with Schmitt Trigger Input
NC7SP17 TinyLogic ULP Single Buffer with Schmitt Trigger Input Features 0.9 to 3.6 CC Supply Operation 3.6 Over-oltage Tolerant I/Os at CC from 0.9 to 3.6 Propagation Delay (t PD ): 4.0ns Typical for 3.0
More informationDC-DC CONVERTERS 2:1 INPUT RANGE, UP TO 2 WATTS MEDICAL APPLICATIONS MTWA2 SERIES
DC-DC CONVERTERS 2:1 INPUT RANGE, UP TO 2 WATTS MEDICAL APPLICATIONS FEATURES 2:1 Wide Input Voltage Range: 4.5-12 Input, 9-18 and 18-36 and 36-75 5000Vac Input to Output 2MOPP Isolation Remote On/Off
More informationLBZX84XXXXLT1G SEMICONDUCTOR. 225 mw SOT-23 Zener Voltage Regulator Diodes. Zener Voltage Regulator Diodes. SERIES 225mW SOT-23 TECHNICAL DATA
SEMICONDUCTOR TECHNICAL DATA 225 mw SOT-23 Zener Voltage Regulator Diodes GENERAL DATA APPLICABLE TO ALL SERIES IN THIS GROUP Zener Voltage Regulator Diodes LBZX84XXXXLTG SERIES 225mW SOT-23 3 Cathode
More informationFeatures. Continuous AUML Series Units. ) 1.5 to 25 J Jump Start Capability (5 minutes), (V JUMP. ) 48 V Operating Ambient Temperature Range (T A
AUML Varistor Series RoHS Description The AUML Series of Multilayer Transient Surge Suppressors was specifically designed to suppress the destructive transient voltages found in an automobile. The most
More information400W, 5V - 188V Surface Mount Transient Voltage Suppressor
400W, 5V - 188V Surface Mount Transient Voltage Suppressor FEATURES Low profile package Ideal for automated placement Glass passivated junction Excellent clamping capability Fast response time: Typically
More informationNC7SV08 TinyLogic ULP-A 2-Input AND Gate
NC7S08 TinyLogic ULP-A 2-Input AND Gate Features 0.9 to 3.6 CC Supply Operation 3.6 Over-oltage Tolerant I/Os at CC from 0.9 to 3.6 Extremely High Speed t PD - 1.0 ns: Typical for 2.7 to 3.6 CC - 1.2 ns:
More informationBZX55C2V4~BZX55C75 AXIAL LEAD ZENER DIODES FEATURES MECHANICAL DATA. MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (TJ =25 C unless otherwise noted)
AXIAL LEAD ZENER DIODES VOLTAGE 2.4 to 75 Volts POWER 500 mwatts FEATURES Planar Die construction 500mW Power Dissipation Ideally Suited for Automated Assembly Processes Lead free in compliance with EU
More informationMARKING CODES: CMMSH1-20 CS20F CMMSH1-40 CS40F CMMSH1-60 CS60F CMMSH1-100 CS100F
SOD-123F CASE * Device is Halogen Free by design FEATURES: Small size (58% smaller than the SMA package) 67% lower profile than SMA Greatly improved power dissipation per board area as compared to the
More informationPolyZen Device Helps Protect Portable Electronics from Charger-Induced Failure
PPLITION NOTE from harger-induced Failure automotive power buses. utomotive power buses are notoriously dirty. lthough they are nominally V, they can range in normal operation from V to V. Still, battery
More informationPackaging (1) Package
Features Switching Regulator RoHS / conform (% lead free) High reflow temperature SMD package Adjustable output voltage Short circuit protection, thermal shutdown Remote ON/OFF control very low shutdown
More informationIs Now Part of To learn more about ON Semiconductor, please visit our website at
Is Now Part of To learn more about ON Semiconductor, please visit our website at www.onsemi.com ON Semiconductor and the ON Semiconductor logo are trademarks of Semiconductor Components Industries, LLC
More informationSubject: TVS Diode LKTAK series alternative assembly line approval
April 13th, 2017 RE: LFPCN41259 To: Our Valued Customers. From: Littelfuse Product Management Team Subject: TVS Diode LKTAK series alternative assembly line approval In order to support growing demand,
More informationSurface Mount Multilayer Ceramic Chip Capacitors for High Reliability Applications
Surface Mount Multilayer Ceramic Chip Capacitors for High Reliability Applications ELECTRICAL SPECIFICATIONS FEATURES Manufactured with a combination of design, materials and tight process control to achieve
More informationAPPLICATION NOTE. Package Considerations. Board Mounting Considerations. Littelfuse.com
package. Compared to products in plastic molded packages, the SESD device offers a significant performance-per-boardarea advantage. The SESD package and a dimensional view of the package bottom are shown
More informationSurface Mount Multilayer Ceramic Chip Capacitors for Commercial Applications
Surface Mount Multilayer Ceramic Chip Capacitors for Commercial Applications ELECTRICAL SPECIFICATIONS FEATURES C0G (NP0) and X7R dielectrics offered C0G (NP0) is an ultra-stable dielectric offering a
More information2W, Low Cost DIP, Dual Output DC/DC Converters
2W, Low Cost DIP, Dual Output DC/DC s Key Features Low Cost 500 Isolation MTBF > 0,000 Hours mv P-P Ripple and Noise Input 12 Output {15 Temperature Performance -25] to +71] Short Circuit Protection UL
More informationType Number Symbol Value Units
Features: Zener voltage range.0 to 7 volts. Mini-MELF package. Surface device type mounting. Hermetically sealed glass. Compression Bonded Construction. All external surfaces are corrosion resistant and
More information1N4728A to 1N4764A. Zener Diodes. Vishay Semiconductors
Zener Diodes Features Silicon Planar Power Zener Diodes For use in stabilizing and clipping circuits with high power rating. Standard Zener voltage tolerance is ± 5 %. Applications Voltage stabilization
More informationAND8007/D. Momentary Solid State Switch for Split Phase Motors APPLICATION NOTE
Momentary Solid State f Split Phase Mots Littelfuse.com APPLICATION NOTE INTRODUCTION In control applications f mots the choice of the solid state switch to be used is always very imptant f the designers:
More informationSurface Mount Multilayer Ceramic Chip Capacitors for Non-Magnetic Applications (Epoxy Bonding)
Surface Mount Multilayer Ceramic Chip Capacitors for Non-Magnetic Applications (Epoxy Bonding) ELECTRICAL SPECIFICATIONS NON-MAGNETIC C0G (NP0) GENERAL SPECIFICATION Note Electrical characteristics at
More informationLM317L 3-Terminal Adjustable Regulator
3-Terminal Adjustable Regulator General Description The is an adjustable 3-terminal positive voltage regulator capable of supplying 100mA over a 1.2V to 37V output range. It is exceptionally easy to use
More informationIs Now Part of. To learn more about ON Semiconductor, please visit our website at
Is Now Part of o learn more about ON Semiconductor, please visit our website at pril 2017 S1FL - S1MFL Surface General-Purpose Rectifier Features Ultra hin Profile Maximum Height of 1.08 mm UL Flammability
More informationNC7SV126 TinyLogic ULP-A Buffer with Three-State Output
NC7S126 TinyLogic ULP-A Buffer with Three-State Output Features 0.9 to 3.6 CC Supply Operation 3.6 Over-oltage Tolerant I/O s at CC from 0.9 to 3.6 Extremely High Speed tpd - 1.0 ns: Typical for 2.7 to
More informationTAK CHEONG. MMSZ5221BW through MMSZ5267BW. Green Product. 500mW SOD-123 SURFACE MOUNT Flat Lead Surface Mount Plastic Package Zener Voltage Regulators
500mW SOD-123 SURFACE MOUNT Flat Lead Surface Mount Plastic Package Zener Voltage Regulators Absolute imum Ratings Symbol Parameter Value Units P D Power Dissipation 500 mw T STG Storage Temperature Range
More informationGas Discharge Tubes SL1002A Series
SL12A Series SL12A Series RoHS Agency Approvals AGENCY AGENCY FILE NUMBER E128662 2 Electrode GDT Graphical Symbol Additional Information Description The Broadband Optimized SL12A series has been especially
More informationFeatures. Samples. Units Continous: Steady State Applied Voltage: DC Voltage Range (VM(DC)) 150 to 970 V AC Voltage Range (V M(AC)RMS
S 34S Varistor Series RoHS Description The Littelfuse S 34S thermally protected varistor is a self-protected device. It consists of a 34mm square varistor with an integral thermal designed to open in the
More informationAluminum Capacitors Power High Ripple Current Snap-In
Aluminum Capacitors 198 PHR-SI 057 PSM-SI smaller dimensions Fig. 1 Component outlines 198 PHR-SI QUICK REFERENCE DATA longer life higher ripple 157 PUM-SI DESCRIPTION VALUE Nominal case size (Ø D x L
More informationVaristor Products Radial Lead Varistors > ZA Series
Description The of transient voltage surge suppressors are radial leaded varistors (MOVs) designed for use in the protection of low and medium-voltage circuits and systems. Typical applications include
More informationAUML Varistor Series. Surface Mount Varistors
The AUML Series of Multilayer Transient Surge Suppressors was specifically designed to suppress the destructive transient voltages found in an automobile. The most common transient condition results from
More informationPLED Ultra Low Holding Current Series
RoHS Description Agency Approvals This PLED ultra-low holding current series exhibits a low holding current parameter that makes it compatible with LED lighting strings. The series provide a switching
More informationSolid Tantalum Surface Mount, TANTAMOUNT, Molded Case, Very Low DCL
Solid Tantalum Surface Mount, TANTAMOUNT, Molded Case, Very Low DCL PERFORMANCE/ELECTRICAL CHARACTERISTICS www.vishay.com/doc?40088 Operating Temperature: - 55 C to + 125 C (above 85 C voltage derating
More informationNC7SV126 TinyLogic ULP-A Buffer with Three-State Output
NC7S126 TinyLogic ULP-A Buffer with Three-State Output Features 0.9 to 3.6 CC Supply Operation 3.6 Over-oltage Tolerant I/O s at CC from 0.9 to 3.6 Extremely High Speed tpd - 1.0ns: Typical for 2.7 to
More information