VKR K125 A : design philosophy as function of performance and reliability
|
|
- Shawn Shields
- 6 years ago
- Views:
Transcription
1 VKR K125 A : design philosophy as function of performance and reliability
2 PERFORMANCE AND RELIABILITY MAIN TOPICS Engine layout Cooling system Lubrication system Auxiliary components layout Starting system and transmission
3 CHARACTERISTICS Two stroke engine with cc displacement Bore and stroke 54 x 54.5 mm 5 scavenging ports Water cooled with built-in water pump Electric starter Counterbalancing shaft Centrifugal dry clutch Exhaust power-valve Homologated fixed advance electronic ignition Maximum working engine speeds: RPM (imposed by limitator) Indicated specific power BHP/L Dry weight 13 Kg Homologation: Homologated categories: CIK-FIA 14/M/15 KF4 - KF3 - KF2 - KF1
4 ENGINE LAYOUT Rear oriented cylinder with increased angle between scavenging ports and reed-valve housing 6 petals reed-valve optimized to crankshaft configuration
5 ENGINE LAYOUT Engine to chassis interface aligned with main bearings and main wall structure
6 ENGINE LAYOUT Alignment of main bearings to main walls and engine supports 18mm dia connecting rod pin and engine main walls location
7 COOLING SYSTEM Split cooling system between crankcase and cylinder Water pump location
8 COOLING SYSTEM Water flow control bushings on the inlet of the cylinder and on the outlet of the crankcase Water pump driving system with 0.5 pump/crankshaft ratio (plastic impeller)
9 LUBRICATION SYSTEM Lubrication pump obtained from water pump driving gears Circulating oil quantity 30cc
10 LUBRICATION SYSTEM Counterbalancing shaft gears lubrified on gear disengagement side Lubrication of each bearing
11 AUXILIARY COMPONENTS LAYOUT Extractable counterbalancing shaft Localized high stiffness at counterbalancing shaft supports
12 STARTING SYSTEM AND TRANSMISSION High power starter motor Transmission chain on the left side of the engine
13 FIRST RACING SEASON BALANCE: PERFORMANCES 2007 racing activity was mainly focused on the KF3 category due to economical factors and of engine development capabilities, obtaining the following main results: Victory at the KF3 Bridgestone Cup Swiss ( Nico Muller ) 6th place at the CIK-FIA KF3 European Championship ( Henri Rajala ) 6th place at the CIK-FIA KF3 Vicking Trophy ( Kalle Kulmanen ) Pole position at the CIK-FIA KF3 Vicking Trophy pre-final ( Henri Rajala ) 7th place at the KF3 beginning race ( Trofeo Margutti at Parma Nico Muller )
14 FIRST RACING SEASON BALANCE: RELIABILITY From a reliability point of view, we had sustained: No withdrawals due to engine failures (6-8 drivers on a dozen main events to wich can be added numerous other participations to minor rilevant racing events) Marginal failures of auxiliary systems external to the engine ( i.e. failure of starter gear loaded by centrifugal forces, was later found to be out-of-spec) Constant performance throughout racing events
15 SUMMING UP OF THE ENGINE PECULIARITIES Very high reliability ( we have engines that used more than 200 liters of fuel without any kind of maintenance) Constant performance level throughout racing events (very good behaviour of cooling and lubrication systems) Ease in wich interventions can be performed on main auxiliary components New CIK-FIA rules interpretation fully compliant (especially applicable for the inspection of the counterbalancing shaft, wich can be done quickly and with ease) Exceptional behaviour of the transmission chain due to the different kind of applied stresses on the rear axle (LH transmission) Outstanding high speed performances
16 ENGINE PRODUCTION AND DISTRIBUTION The engine is produced and distributed by: Villa Kart Racing Via 4 novembre 49/bis Strambino TO Italy Tel Fax info@vkr-engines.com Website: Imagination is more important than knowledge Knowledge is limited Imagination encircles the world Modena, 18 Ottobre 2007 Produced by Uber Ferraguti
ENGINE. IAME SPA IAME KA cc REEDJET AUS TaG 6 Years 28
ENGINE Manufacturer Make Model Validity of the homologation Number of pages IAME SPA IAME KA 100-100cc REEDJET AUS TaG 6 Years 28 This Homologation Form reproduces descriptions, illustrations and dimensions
More information45.06 Fuel Refer Chapter 22 Fuel, as run, to comply with tests under chapter 22.01
CHAPTER 45 PARILLA LEOPARD 125cc and PARILLA LEOPARD X30 125cc Preamble It is expected that this class will continue to evolve during its early life and the promoters of the class reserve the right to
More informationNATIONAL HOMOLOGATION FORM KARTING ENGINE X30 SUPER - TAG
NATIONAL HOMOLOGATION FORM KARTING ENGINE X30 SUPER - TaG Manufacturer IAME S.P.A - ZINGONIA Make IAME Model X30 SUPER - TAG Validity of the homologation 6 years Number of pages 51 This Homologation Form
More information2004 VORTEX ENGINES. VORTEX SRL Via Scarpone, PAVIA (PV) ITALY Tel Fax P.IVA
2004 VORTEX ENGINES After its several victories at an international level, among which 8 World Titles and the European Champion Title in FA in 2003, Vortex, always looking for new solutions and products,
More informationWKA 2010 MANUFACTURER S CUP TAG SERIES REGULATIONS
WKA 2010 MANUFACTURER S CUP TAG SERIES REGULATIONS Contact information and updates can be found at www.ovka.com The following regulations are guidelines ONLY. Please refer to 2010 WKA Technical Manual
More informationManufacturer Address Engine # IAME S.p.A. Via Lisbona, ZINGONIA (ITALY) X30 125cc RL-C TaG. Number of pages 22 PICTURE OF ENGINE
Manufacturer Address Engine # IAME S.p.A. Via Lisbona, 15 24040 ZINGONIA (ITALY) TAG RACING INTERNATIONAL TM Manufacturer IAME S.P.A. - ZINGONIA (I) Make PARILLA Model X30 125cc RL-C TaG Inlet type REED
More informationENGINE. Manufacturer IAMEs.p.a. Category. Homologation Period. Pages 16. Model, Type SIGNATURE AND STAMP OF AKA SIGNATURE AND STAMP OF APPLICANT
1 ENGINE Manufacturer IAMEs.p.a. Category Make Model, Type PARILLA Leopard X30 125cc RL - TaG - AUS Homologation Period Pages 16 This homologation sheet reproduces description, illustrations and dimensions
More information2006 MINI Cooper ENGINE Engine - Technical Data - Cooper (W10) & Cooper S (W11) Engine - Technical Data - Cooper (W10) & Cooper S (W11)
ENGINE, GENERAL 11 00 ENGINE IN GENERAL 2002-08 ENGINE Engine - Technical Data - Cooper (W10) & Cooper S (W11) ENGINE IN GENERAL Cylinder 4 Bore mm 77 (3.03) Stroke mm 85.8 (3.377) Effective displacement
More informationHOMOLOGATION OF KART ENGINE
HOMOLOGATION OF KART ENGINE Category IAME X30 JUNIOR & SENIOR Manufacturer IAME Model X30 125cc RL TaG - UK Valid From 01 January 2014 Number of pages 20 This Homologation Form reproduces descriptions,
More informationTHE LEAD 250 SEF-R THROTTLE AND TAKE TWIST THE 4 STROKE
ENDURO EN 50 SEF TWIST THE THROTTLE AND TAKE THE LEAD 2017 DEVELOPMENTS } Reinforced dual compound plastics } In-mold graphics } New 10.4 L fuel tank } Revised suspension linkage } Redesigned frame geometry
More informationREGULATIONS AND SPECIFICATIONS FOR THE 2017 NORTHERN REGIONS REGIONAL GP 125 KARTING CHAMPIONSHIP
REGULATIONS AND SPECIFICATIONS FOR THE 2017 NORTHERN REGIONS REGIONAL GP 125 KARTING CHAMPIONSHIP NORTHERN REGIONS MOTORSPORT CIRCULAR NR (43/17) (161043/144) GP 125 CLASS RULES FOR 2017 Refer: Section
More information2018 HONDA CRF400R ENDURO
Press Release 2018 HONDA CRF400R ENDURO Press release date: 31 st July 2017 Press release date: New model: The CRF400RX Enduro is an all new product for the Honda lover! Developed from the CRF 450 RX Enduro
More information1. Rotax Mini-Max. Chassis Only standard chassis are allowed.
ROTAX MOJO MAX Challenge Technical Regulations 2015 Appendix for 125 Mini MAX and 125 Micro MAX U.S.A. (The Technical Regulations 2015 replace the Technical Regulations 2014 Version May 06 th 2015 1. Rotax
More informationNote: Registration does not imply or guarantee use in a class
1 Note: Registration does not imply or guarantee use in a class or classes. Application for use in a class or classes must be applied for after Homologation and Registration approvals ENGINE Manufacturer
More information100cc REEDJET USA TaG
100cc REEDJET USA TaG FEATURES Cylinder Volume 100 cm³ max Bore 48.20 mm Max. theoretical bore 48.53 mm Stroke 54.05 mm max Cooling system Air Inlet system Reed valve Number of carbs 1 Tillotson Carburettor
More informationX30 CHALLENGE INTERNATIONAL TECHNICAL REGULATIONS 2017 PART 2 ENGINES
X30 CHALLENGE INTERNATIONAL TECHNICAL REGULATIONS 2017 PART 2 ENGINES X30 CHALLENGE INTERNATIONAL TECHNICAL REGULATIONS 2017 - PART 2: ENGINES ARTICLE 1 - ENGINE IAME X30 125cc RL TaG - X30 SENIOR & X30
More informationPARILLA LEOPARD X TECHNICAL SPECIFICATIONS
PARILLA LEOPARD X30 125 VERSION 7 / 2013 UPDATED JULY 16 th, 2013 DOCUMENT UPDATE SCHEDULE It is certified that the updates listed below have been approved by the Australian Karting Association and have
More informationCOMPONENT HOMOLOGATION POLICY AND PROCEDURE
COMPONENT HOMOLOGATION POLICY AND PROCEDURE Policy number THS001 Version V2 Approved by Board 2 December 2014 Responsible person Status CEO Public Fees reviewed Scheduled review date 8 November 2016 31
More informationDRAFT VTS. Approved for Racing
DRAFT VTS Approved for Racing Vehicle Manufacturer: Audi Year and Model: 2009-2013 R8 This draft of the listed vehicle s VTS is posted with the specifications that we currently have for the vehicle. If
More informationMotorsport South Africa
Motorsport South Africa SOUTH AFRICAN KARTING COMMISSION HOMOLOGATION SCHEDULE MAXTERINO MX-60 Version 1 2017-01-25 MSA Ref. Manufacturer MAXTER S.R.L. Distributor Ed Murray Racing cc Model Maxterino Period
More informationGX270 POWEREQUIPMENT.HONDA.COM.AU
GX270 POWEREQUIPMENT.HONDA.COM.AU The GX270 was introduced in 2011, featuring new features, more power, quieter & better performance, lower fuel consumption, and lower emissions. INTRODUCTION COMMON APPLICATIONS
More informationK&T Saw Shop or D MC 93 KART ENGINE 04/67 to 01/69 IPL Page 1 of 9 Accessories
16-400165D MC 93 KART ENGINE 04/67 to 01/69 IPL 92972 Page 1 of 9 Accessories 16-400165D MC 93 KART ENGINE 04/67 to 01/69 IPL 92972 Page 2 of 9 Accessories 68899 Piston Assy, 2.170 68897 Piston Assy, 2.175
More informationPARILLA LEOPARD RL 125 TECHNICAL SPECIFICATIONS
PARILLA LEOPARD RL 125 VERSION 4 / 2012 UPDATED September 6 th, 2012 DOCUMENT UPDATE SCHEDULE It is certified that the updates listed below have been approved by the Australian Karting Association and
More informationIAME BAMBINO CUP TECHNICAL REGULATIONS 2017/2018 VER 1.0
IAME BAMBINO CUP TECHNICAL REGULATIONS 2017/2018 VER 1.0 NAME OF EVENT: ORGANIZER: PROMOTER: TITLE SPONSOR: IAME-UAE Bambino Cup Ras Al Khaimah Kart Track (RAK TRACK) Emirates Karting Ras Al Khaimah Economic
More informationMIKKEL MAC DRIVER PROFILE
MIKKEL MAC DRIVER PROFILE DRIVER PROFILE Name Date of birth Weight Height Birthplace Residence Car Co-driver Mikkel Mac Jensen 18 Deccember 1992 68 kg (72 kg equipped) 175 cm Nykoebing, Denmark Helsingoer,
More information2014 CRF150R/RB MOTORCYCLES.HONDA.COM.AU
2014 CRF150R/RB MOTORCYCLES.HONDA.COM.AU The award-winning CRF150R/RB packs genuine high-performance fourstroke power into a mini racer. INTRODUCTION INTRODUCTION Younger racers may be smaller in stature,
More informationsolo KLEINMOTOREN GMBH
Engine 2 489 the Engine SOLO type 2 489 Serial - no.... Manufactured... Aircraft - type... Registration no.... Owner... Log of revisions no. edition date revised page no. date of entry edition 1 revised
More information2018 Model Release 1
2018 Model Release 1 ENDURO 14 125 2T Welcome the SHERCO SE-R 125! 100% new project to complete the range 15 125 2T Context : The Engine to complete the range The 125 market is large in Europe, especially
More informationDRAFT VTS. Approved for Racing ASTON MARTIN
DRAFT VTS Approved for Racing Vehicle Manufacturer: ASTON MARTIN Year and Model: 2013 V12 VANTAGE This draft of the listed vehicle s VTS is posted with the specifications that we currently have for the
More information07 assets & specs 11 bodywork & aerodynamics 12 electronics 13 brakes, wheels & suspension 14 transmission & bell housing 15 engines 17 personalized
morgan lm p2 T a b l e o f c o n t e n t s 05 Morgan LM P2 07 assets & specs 11 bodywork & aerodynamics 12 electronics 13 brakes, wheels & suspension 14 transmission & bell housing 15 engines 17 personalized
More information5TH CATEGORY - HISTORIC RACING. GROUP Sc APPROVED VEHICLE SPECIFICATION
5TH CATEGORY - HISTORIC RACING GROUP Sc APPROVED VEHICLE SPECIFICATION This form details the approved specifications of individual vehicle models in the 5th Category Historic car group. To be issued with
More informationHOMOLOGATION OF KART ENGINE PROVISIONAL
HOMOLOGATION OF KART ENGINE Category MSA Cadet Manufacturer IAME Model Parilla Gazelle 60cc U.K. Valid From 01 January 2013 Number of pages of main fiche 16 This Homologation Form reproduces descriptions,
More informationMotor und Kupplung Engine and Clutch Moteur et Accouplement Motore e Frizione
Motor und Kupplung Engine and Clutch Moteur et Accouplement Motore e Frizione ENGINE 9 CONTENTS 0 - INFORMATION, DESCRIPTION, TECHNICAL DATA 0. Description Engine changes - 97 2 model Oil tank changes
More information334A or 334AB. Number of piston rings 1 Number of exhaust ports 2. Big end conr. Ball-bearing diam. 18X24X15 Combustion chamber shape Spherical
125cc LEOPARD FEATURES Cylinder volume 123.67 cc Bore 54 mm Max. theoretical bore 54.28mm Stroke 54mm Cooling system Water Inlet system Reed valve Number of carbs 1 Tillotson HL Carb. 334A or 334AB Cylinder/crankcase
More informationDRAFT VTS. Approved for Racing
DRAFT VTS Approved for Racing Vehicle Manufacturer: Mazda Year and Model: 20 MX5 This draft of the listed vehicle s VTS is posted with the specifications that we currently have for the vehicle. If a specification
More informationMSA BRITISH TOURING CAR CHAMPIONSHIP
MSA BRITISH TOURING CAR CHAMPIONSHIP HOMOLOGATION FORM FOR NGTC ENGINE Manufacturer FORD Manufacturer Designation Mountune Valid From 01-Jun-11 Engine General Number of cylinders 4 Arrangement I Stroke
More informationSTIH) Technical Information New cut-off machine STIHL TS 700 Series 4224
STIH) Technical Information 52.2004 New cut-off machine STIHL TS 700 Series 4224 Contents 1. Technical description 2. Technical data 3. Accessories 4. Service accessories 5. Repairs 6. Spare parts englisch
More informationREGULATION OF YAMAHA SUNDAY RACE RACE 2017
1. ENGINE SPECIFICATIONS 1.1. Engine Type 4 Stroke Single Cyl 4 Stroke Single Cyl 4 Stroke Single Cyl 1.1.1. Displacement Up to 150cc Up to 150cc Up to 150cc 1.1.2. Engine Layout vertical vertical vertical
More informationPartial Eligibility Models out of production 4+ years.
Partial Eligibility Models out of production 4+ years. A vehicle will be in FULL ELIGIBILITY for World Challenge competition from the time it is homologated, until the end of the 4 th year after the body
More informationDRAFT VTS. Approved for Racing
DRAFT VTS Approved for Racing Vehicle Manufacturer: Audi Year and Model: 2009 R8 This draft of the listed vehicle s VTS is posted with the specifications that we currently have for the vehicle. If a specification
More information2017 Model Information
2017 Model Information MODEL NAME: KX85 Big Wheel MODEL CODE: KX85DHF THE HOTTEST RACE BIKES FOR FUTURE CHAMPIONS At both the amateur and professional levels, Kawasaki has long been the dominant brand
More informationPRAGA NORTH AMERICA 2015 PRAGA Products
PRAGA NORTH AMERICA 2015 PRAGA Products WWW.PRAGANORTHAMERICA.COM The best materials make the best products Based in Italy, the IPK engineering team designs their product line using the highest quality
More informationX30 CHALLENGE TECHNICAL REGULATIONS 2017/2018 VER 1.0
X30 CHALLENGE TECHNICAL REGULATIONS 2017/2018 VER 1.0 NAME OF EVENT: ORGANIZER: PROMOTER: TITLE SPONSOR: X30 Challenge Ras Al Khaimah Kart Track (RAK TRACK) Emirates Karting Ras Al Khaimah Economic Zone
More informationPartial Eligibility. Models out of production 4+ years.
Partial Eligibility Models out of production 4+ years. A vehicle will be in FULL ELIGIBILITY for World Challenge competition from the time it is homologated, until the end of the 4 th year after the body
More informationK&T Saw Shop or MC 92 04/77 to 07/77 IPL Page 1 of 9 Accessories
15-400165 MC 92 04/77 to 07/77 IPL 91077 Page 1 of 9 Accessories 15-400165 MC 92 04/77 to 07/77 IPL 91077 Page 2 of 9 Accessories 68899 Piston Assy, 2.170 68897 Piston Assy, 2.175 87940 Piston Assy, 2.185
More information2015 RACING LINE. New line of competition karts, kart accessories and sportswear
2015 RACING LINE New line of competition karts, kart accessories and sportswear The best materials for the best products The IPK s engineering team based in Italy constantly develops new solutions, more
More informationDRAFT VTS. Approved for Racing
DRAFT VTS Approved for Racing Vehicle Manufacturer: Year and Model: 2008 CLK 63 Black Series This draft of the listed vehicle s VTS is posted with the specifications that we currently have for the vehicle.
More informationUSA SUPER SHIFTER 175cc
USA SUPER SHIFTER 175cc FEATURES Cylinder volume 174.46 cm³ (Max 176.6 cm³) Bore 63.90 mm Max. theoretical bore 64.26 mm Stroke 54.40 mm Distance between conrod centers 115 mm Cooling system Water Inlet
More informationPiaggio BV 350. Function, Form, Finish and Performance Wow!
Piaggio BV 350 Function, Form, Finish and Performance Wow! Revolutionary 4 Valve 350cc Engine This engine is only 60cc larger in displacement but develops 50% more power than the h existing 300. 4 VALVE
More informationDRAFT VTS. Approved for Racing
DRAFT VTS Approved for Racing Vehicle Manufacturer: Dodge Year and Model: 2010 Challenger This draft of the listed vehicle s VTS is posted with the specifications that we currently have for the vehicle.
More information17/M/24 PHOTO DE L ARRIÈRE DU MOTEUR COMPLET PHOTO OF THE REAR OF THE COMPLETE ENGINE THIS PAGE CANCELS AND REPLACES PAGE 4 OF THE CIK-FIA FICHE
THIS PAGE CANCELS AND REPLACES PAGE 4 OF THE CIK-FIA FICHE PHOTO DE L ARRIÈRE DU MOTEUR COMPLET PHOTO OF THE REAR OF THE COMPLETE ENGINE Page 1 of 9 THIS PAGE CANCELS AND REPLACES PAGE 9 OF THE CIK-FIA
More information05 Ligier JS P2 06 assets & specs 09 bodywork & aerodynamics 10 electronics 11 brakes, wheels & suspension 12 transmission & bell housing 13 engines
T a b l e o f c o n t e n t s 05 Ligier JS P2 06 assets & specs 09 bodywork & aerodynamics 10 electronics 11 brakes, wheels & suspension 12 transmission & bell housing 13 engines 15 personalized services
More informationMODEL NUMBER GARDOL 85SB PRODUCT NUMBER MFG. ID. NUMBER
ILLUSTRATED PARTS LIST MODEL NUMBER GARDOL 8SB PRODUCT NUMBER 00-7 MFG. ID. NUMBER 0070 - Rev. AUGER HOUSING / IMPELLER ASSEMBLY SNOW THROWER - MODEL NO. GARDOL 8SB (0070), PROD. NO. 00-7 0 7 8 7 7 0 7
More information2018 WKC Vintage Enduro Class Rules
Classes: 2018 WKC Vintage Enduro Class Rules (Proposed 4/4/18) 1. Vintage Open Age 15 & up Twin foreign engines Age 18 & up, with karting experience Eligible Motors: o All Vintage Euro motors o All Vintage
More information5TH CATEGORY - HISTORIC RACING. GROUP Nb APPROVED VEHICLE SPECIFICATION
5TH CATEGORY - HISTORIC RACING GROUP Nb APPROVED VEHICLE SPECIFICATION This form details the approved specifications of individual vehicle models in the 5th Category Historic car group. To be issued with
More informationDRAFT VTS. Approved for Racing
DRAFT VTS Approved for Racing Vehicle Manufacturer: Year and Model: SCION 2013 FR-S This draft of the listed vehicle s VTS is posted with the specifications that we currently have for the vehicle. If a
More informationDRAFT VTS. Approved for Racing
DRAFT VTS Approved for Racing Vehicle Manufacturer: Lotus Year and Model: 2011-2014 EVORA This draft of the listed vehicle s VTS is posted with the specifications that we currently have for the vehicle.
More informationOff-road adventures begin here.
Off-road adventures begin here. When it comes to kids' mini-bikes, Yamaha is the clear leader. With the 's rider-friendly design it's easy to see why this 50cc 2-stroke is a firm favourite with kids and
More informationRightfully wrong. WR250F
Rightfully wrong At Yamaha we've always liked to do things our way. Being different is what makes our bikes so special. And when you take a look at the new 's high-tech 'reverse' engine you can see that
More informationCatch the extreme. YZF-R6
Catch the extreme One ride on the R6 lets you know that this bike was born on the racetrack. Its MotoGP-bred technology is tuned to give you the kind of outstanding engine and chassis performance usually
More informationDRAFT VTS. Approved for Racing
DRAFT VTS Approved for Racing Vehicle Manufacturer: Porsche Year and Model: 2010-2013 911GT3R This draft of the listed vehicle s VTS is posted with the specifications that we currently have for the vehicle.
More informationSEAT LEON EUROCUP 2014
01 INTRODUCTION: A NEW STEP FORWARD 02 SEAT LEON CUP RACER: THE CAR & A PERFECT BASIS 03 SEAT LEON CUP RACER: TECHNICAL OVERVIEW 04 SEAT LEON EUROCUP 01 INTRODUCTION - A NEW STEP FORWARD 1970 More than
More informationDRAFT VTS Approved for Racing
DRAFT VTS Approved for Racing Vehicle Manufacturer: Year and Model: Hyundai 2013-2014 Genesis This draft of the listed vehicle s VTS is posted with the specifications that we currently have for the vehicle.
More informationLMP3 Prototype overview
LMP3 Prototype overview LAS Motorsport An association of competences... The goal of this joint venture is to benefit of he best know-how in every domain: ADESS AG, well known F1 and LMP design office,
More informationDRAFT VTS. Approved for Racing. Pontiac
DRAFT VTS Approved for Racing Vehicle Manufacturer: Year and Model: 2010 Solstice GXP Pontiac This draft of the listed vehicle s VTS is posted with the specifications that we currently have for the vehicle.
More informationUT cc Chain Saw Page 1 of 9 Figure A
UT10519 46cc Chain Saw Page 1 of 9 Figure A UT10519 46cc Chain Saw Page 2 of 9 Figure A 1 700106001 1 Heat Reflector Tape 2 671087001 4 Spacer Insert 3 570226001 1 S Oil Outlet Grommet 4 660503002 1 Guide
More informationDRAFT VTS. Approved for Racing
DRAFT VTS Approved for Racing Vehicle Manufacturer: Nissan Year and Model: 2009- NISMO 370z This draft of the listed vehicle s VTS is posted with the specifications that we currently have for the vehicle.
More informationi4550b Chain Saw UT Page 1 of 2 Carburetor - Muffler - Air Filter
i4550b Chain Saw UT-10807 Page 1 of 2 Carburetor - Muffler - Air Filter i4550b Chain Saw UT-10807 Page 2 of 2 Carburetor - Muffler - Air Filter Referenznumme Artikelnummer Menge Description 1 UP06752 1
More informationTRX420TM1 MOTORCYCLES.HONDA.COM.AU
TRX420TM1 MOTORCYCLES.HONDA.COM.AU With an impressive list of features this mid-sized workhorse boasts maximum durability and excellent handling performance INTRODUCTION NEW FOR 2014 With only the toughest
More information2.1, Class 1 Karts Specific Regulations: Class 1 refers to Direct Drive Karts of a designed cubic capacity of 100cc.
2.0, Formula A Pre 2000: 2.1, Class 1 Karts Specific Regulations: Class 1 refers to Direct Drive Karts of a designed cubic capacity of 100cc. 2.2, Class Structure: Formula A Pre 2000: Up to and including
More informationDRAFT VTS. Approved for Racing
DRAFT VTS Approved for Racing Vehicle Manufacturer: Honda Year and Model: 2012-2013 This draft of the listed vehicle s VTS is posted with the specifications that we currently have for the vehicle. If a
More informationDRAFT VTS. Approved for Racing
DRAFT VTS Approved for Racing Vehicle Manufacturer: Year and Model: Honda 2013-2016 Accord This draft of the listed vehicle s VTS is posted with the specifications that we currently have for the vehicle.
More informationDRAFT VTS. Approved for Racing
DRAFT VTS Approved for Racing Vehicle Manufacturer: Acura Year and Model: TSX (2004-2008) This draft of the listed vehicle s VTS is posted with the specifications that we currently have for the vehicle.
More informationTRX420FM1 MOTORCYCLES.HONDA.COM.AU
TRX420FM1 MOTORCYCLES.HONDA.COM.AU With an impressive list of features this mid-sized workhorse boasts maximum durability and excellent handling performance INTRODUCTION NEW FOR 2014 With only the toughest
More informationDRAFT VTS Approved for Racing
DRAFT VTS Approved for Racing Vehicle Manufacturer: Year and Model: Mini 2009-2013 Cooper S JCW This draft of the listed vehicle s VTS is posted with the specifications that we currently have for the vehicle.
More informationCEV BUCKLER 2012 TECHNICAL RULES Moto3
CEV BUCKLER 2012 TECHNICAL RULES Moto3 Moto3 TECHNICAL REGULATIONS CEV 2012 Contents 1. Engine 2. Inlet & Fuel System 3. Exhaust System 4. Transmission 5. Ignition, Electronics & Data-Logging 6. Chassis
More informationRACE CLASS: SST-60 MANUFACTURER OMC JOHNSON / ADVERTISED SALES NAME
RACE CLASS: SST-60 MANUFACTURER OMC JOHNSON / ADVERTISED SALES NAME EVINRUDE SST-60 CLASS; DISPLACEMENT MAX in 3 SST-60; 56.1 NUMBER OF CYLINDERS 3 MIN. VOLUME OF COMBUSTION CHAMBER cm 3 28.5 (INC L SPARK
More informationNATIONAL HOMOLOGATION FORM - ENGINE
NATIONAL HOMOLOGATION FORM - ENGINE Homologation N Manufacturer VORTEX Make DVS JNR Model 125CC Validity of the homologation 10 years Number of pages 30 This Homologation Form reproduces descriptions,
More informationDRAFT VTS Approved for Racing
DRAFT VTS Approved for Racing Vehicle Manufacturer: Year and Model: 2010-2012 Genesis Coupe This draft of the listed vehicle s VTS is posted with the specifications that we currently have for the vehicle.
More informationDRAFT VTS. Approved for Racing
DRAFT VTS Approved for Racing Vehicle Manufacturer: Kia Year and Model: 2011 Optima This draft of the listed vehicle s VTS is posted with the specifications that we currently have for the vehicle. If a
More informationLUBRICATING OF MACHINES OR ENGINES IN GENERAL; LUBRICATING INTERNAL COMBUSTION ENGINES; CRANKCASE VENTILATING
F01M LUBRICATING OF MACHINES OR ENGINES IN GENERAL; LUBRICATING INTERNAL COMBUSTION ENGINES; CRANKCASE VENTILATING Lubrication of machines or engines in general, where the lubrication system, or device
More informationDRAFT VTS. Approved for Racing
DRAFT VTS Approved for Racing Vehicle Manufacturer: Year and Model: Nissan 2013 Altima This draft of the listed vehicle s VTS is posted with the specifications that we currently have for the vehicle. If
More informationOff-road adventures begin here.
Off-road adventures begin here. When it comes to kids' mini-bikes, Yamaha is the clear leader. With the PW50's rider-friendly design it's easy to see why this 50cc 2-stroke is a firm favourite with kids
More informationTRX450ER MOTORCYCLES.HONDA.COM.AU
TRX450ER MOTORCYCLES.HONDA.COM.AU Where do you go when you want a four-wheeler that's not just all work and no play? Look no further than the TRX450ER. INTRODUCTION ENGINE/DRIVETRAIN Powerful four-stroke
More informationFig. 6: Assembling Piston & Rod. NOTE: Notch must face forward Toyota Starlet CRANKSHAFT MAIN BEARINGS
connecting rods are marked for reassembly. 3. Thoroughly clean and inspect all components. Coat pin with engine oil and heat piston to 158-176 F (70-80 C). Pin should push fit with thumb pressure through
More informationFun follows both form and function with the Ninja 650R motorcycle. Its sporty Ninja styling is as dramatic as it is functional, with built-in wind
Fun follows both form and function with the Ninja 650R motorcycle. Its sporty Ninja styling is as dramatic as it is functional, with built-in wind protection, a low-slung dual seat and rubber-mounted handlebars
More informationDRAFT VTS Specs Pending
DRAFT VTS Specs Pending Approved for Racing Vehicle Manufacturer: Dodge Year and Model: 200 Viper ACR-X This draft of the listed vehicle s VTS is posted with the specifications that we currently have for
More informationX30 125cc Spec. EU ASSEMBLY INSTRUCTIONS AND USER MANUAL MAN-089
X30 125cc Spec. EU ASSEMBLY INSTRUCTIONS AND USER MANUAL MAN-089 FEEDING Fuel mixture 98 RON and oil 5% (20:1) minimum. Engine oil CIK homologated. Our experience dictates use of oils, such as: - WLADOIL
More informationDRAFT VTS. Approved for Racing
DRAFT VTS Approved for Racing Vehicle Manufacturer: Year and Model: Lamborghini (03-08) Gallardo This draft of the listed vehicle s VTS is posted with the specifications that we currently have for the
More informationcan be used both internationally and nationally due to its uniform technical regulations.
English Version The Philosophy Opel Motorsport s main objective is to enable the enjoyment of top-class customer motorsport at affordable costs in both rallying and touring car circuit racing. The next
More informationVehicle Technical Specifications
Vehicle Manufacturer: Year and Model: Ford Mustang Boss 302 (2012) and GT Competitors needing a specification that is not listed should contact the World Challenge Technical Department to find out when
More informationLightweight motocross racer
Lightweight motocross racer Running with high-tech chassis and engine designs, the YZ85 and the large-wheel YZ85LW 2-strokes are a top choice for tomorrow's pro riders. Designed to kick out holeshot-winning
More information2017 F-Series Technical Competition Regulations
2017 F-Series Technical Competition Regulations Table of Contents 1. Aims 2. General Principles 2.1. Codes of Conduct 2.2. Regulation Adjustments 3. Engines Specifications 3.1 Starter 3.2 Battery 3.3 Air
More informationCatch the extreme. YZF-R6
Catch the extreme One ride on the R6 lets you know that this bike was born on the racetrack. Its MotoGP-bred technology is tuned to give you the kind of outstanding engine and chassis performance usually
More informationENGINE 108H. Manufacturer. TORINI MOTOR CO., LTD. Make. TORINI Model. TRE220 UPDATE (to TC250) Validity of the homologation 6 years Number of pages 31
ENGINE Manufacturer TORINI MOTOR CO., LTD. Make TORINI Model TRE220 UPDATE (to TC250) Validity of the homologation 6 years Number of pages 31 This Homologation Form reproduces descriptions, illustrations
More informationDRAFT VTS Approved for Racing
DRAFT VTS Approved for Racing Vehicle Manufacturer: Year and Model: Nissan 2009-2016 370z This draft of the listed vehicle s VTS is posted with the specifications that we currently have for the vehicle.
More informationDRAFT VTS Approved for Racing
DRAFT VTS Approved for Racing Vehicle Manufacturer: Honda Year and Model: 2012-2014 This draft of the listed vehicle s VTS is posted with the specifications that we currently have for the vehicle. If a
More informationCTX700N MOTORCYCLES.HONDA.COM.AU
CTX700N MOTORCYCLES.HONDA.COM.AU The brilliance of Honda engineering shines once again in the form of the 2014 CTX700N. This is a machine specifically engineered to make motorcycling more approachable,
More informationDRAFT VTS. Approved for Racing
DRAFT VTS Approved for Racing Vehicle Manufacturer: Honda Year and Model: 2012-2013 Civic Si This draft of the listed vehicle s VTS is posted with the specifications that we currently have for the vehicle.
More informationWe Keep the World in Motion. Power Plants
Power Plants March 2011 Which kind of power plants and applications are our motors used for? ELIN Motoren offers drive solutions for selected applications in all forms of thermal power plants: Pumps -
More information