WATER SPRAY NOZZLE DATA SHEET
|
|
- Edwina Freeman
- 6 years ago
- Views:
Transcription
1 FIRE FIGHTING EQUIPMENT DATA SHEET WATER SPRAY NOZZLE DATA SHEET JOB NO. : RFQ. NO. : ISSUE : SHEET OF 01 CUSTOMER: ITEM NO. : 02 PROJECT : QUANTITY : 03 LOCATION : SERVICE : FIRE WATER SYSTEM MODEL NO. CODE & STANDARDS HV-A WITHOUT STRAINER, HV-AS WITH STRAINER 07 APPROVALS UL LISTED FM APPROVED KFEIC OTHERS 08 CODE & STANDARDS NFPA BS KFPL OTHERS 09 OPERATING CONDITIONS 10 TEMPERATURE MIN. : ( ) OPER. : ( AMB ) DESIGN : ( 60 ) 11 PRESSURE MAXIMUM WORKING : ( 12.3 ) kg/cm² MIN. EFFECTIVE WORKING : ( 3.5 ~ 10.5 ) kg/cm² 12 FLUID HANDLED WATER AND / OR SEA WATER FOAM-WATER SOLUTION 13 INSTALLATION OUTDOOR AND / OR INDOOR 14 DESIGN FEATURES 15 TYPE HIGH VELOCITY MEDIUM VELOCITY 16 SIZE & CONNECTION 3/4" NPT MALE 3/4" BSPT MALE 17 SPRAY ANGEL AND 75 / K / K K-FACTOR 90 / K / K MATERIALS 20 HOUSING BRASS 21 SCROLL BRASS 22 ACCESSORIES TEST & INSPECTION 26 DIMENSION INSPECTION WITNESS REVIEW MATERIAL INSPECTION WITNESS REVIEW 27 VISUAL INSPECTION WITNESS REVIEW PERFORMANCE TEST YES NO 28 FINISH UNIT WEIGHT 29 PAINTING N/A ( 0.2 ) Kg 30 COLOR NATURAL CHROME PLATED REV DATE PRP'D CHK'D APP'D DESCRIPTION J. K. JEONG Y. K. AN S. M. LEE FOR STANDARDIZATION
2 HIGH VELOCITY WATER SPRAY NOZZLE TECHNICAL DATA : MODEL MAXIMUM WORKING PRESSURE EFFECTIVE WORKING PRESSURE END CONNECTION MATERIAL HV-A Without strainer HV-AS with strainer 12.3 Kg./Sq.Cm. (175 PSI) 3.5 TO 10.5 Kg./Sq.Cm. (50 to 150 PSI) ¾" BSPT (¾" NPT OPTIONAL) Housing & Scroll - Brass IS : 291 ( EQUIVALNET TO ASTM-B21) INCLUDED WATER SPRAY K-FACTOR SPRAY ANGLE AND ANGLE METRIC(US) K-FACTOR (1.54) (1.26) (2.24) (1.82) WEIGHT FINISH APPROVALS ORDERING INFORMATION Approx Kgs. Brass Finish Nickel Chrome Plated (optional) UL Listed Specify Model, K-Factor, Spray angle and Finish. The nozzle may be oriented in any position as deemed necessary to cover the hazard. MAINTENANCE The spray nozzle must be handled with due care. For best results, the storage as well as any further shipment be made in original packing only. Nozzle which is visibly damaged should not be installed. Use Teflon tape or soft thread sealant on the male thread of the nozzle. APPLICATION High Velocity Water Spray Nozzles are internal swirl plate type open nozzles designed for use in fixed water spray or deluge system for the fire protection application. These nozzles produce solid uniform and dense core of high velocity water spray to effect fire control. Nozzles are normally used to cool the surface as well as for extinguishment. Nozzles are typically used for Deluge protection of special hazards such as oil filled transformers, switch-gear, chemical process equipments, conveyor system and flammable liquid storage areas..the minimum desirable pressure to achieve a reasonable spray pattern is 3.5 Kg./sq.cm. (50 psi). The water distribution pattern as shown in the graph in following pages giving maximum effective axial distance from the nozzle. The spray pattern shown is with indoor application. The system designer must consider wind velocity while designing the system for outdoor application. Field obstruction if any affecting the spray pattern of the nozzle must be considered. It is recommended that the water spray system be inspected by an authorised technical personnel. The nozzle must be checked for corrosion, external and internal obstruction, blockage if any. The nozzle should be cleaned or replaced if required. The system must be operated with optimum water flow at least three times in a year or as per the provision of NFPA/TAC or local authority having jurisdiction. The owner is solely responsible for maintaining the water spray system and components therein, so that it performs properly when required. PAGE 1 OF 4
3 DIMENSION In millimetres ( Approximate ) NOZZLE FACTOR & SPRAY ANGLE A B C (A/F) K 22 x K 18 x K 32 x K 26 x DISCHARGE CHARACTERISTICS PAGE 2 OF 4
4 SPRAY PATTREN K22 X 75 K18 X 80 K32 X 90 Note : One square is 200 X 200mm. PAGE 3 OF 4
5 K26 X 100 Note : One square is 200 X 200mm. PAGE 4 OF 4
MODEL: HV-AS & HV-BS TECHNICAL DATA : MAINTENANCE DESCRIPTION PRESSURE (3/4 NPT OPTIONAL)
High Velocity Water Spray Nozzle MODEL: HV-AS & HV-BS TECHNICAL DATA : MAXIMUM WORKING PRESSURE EFFECTIVE WORKING PRESSURE 12 Bar (175 PSI) 3.5 Bar to 10.5 Bar (50-150 PSI) END CONNECTION MATERIAL 3/4
More informationData Sheet High Velocity Water Spray Nozzle. Issue B. Rapidrop Global. Ref: SPTDHV/E TECHNICAL DATA MAINTENANCE DESCRIPTION
Ref: SPTDHV/E Jan, 2011 Technical Data TECHNICAL DATA MODEL MAXIMUM WORKING PRESSURE EFFECTIVE WORKING PRESSURE END CONNECTION DESCRIPTION HV-AS with strainer 12 Bar (175 PSI) 3.5 Bar to 10.5 Bar (50-150
More informationData Sheet 11.2 Issue B
Technical Details MODEL HV-AS with strainer Ref: SPTDHV/E MAXIMUM WORKING PRESSURE 12 Bar (175 PSI) Issue A Jan, 2011 Technical Data EFFECTIVE WORKING PRESSURE 3.5 Bar to 10.5 Bar (50-150 PSI) END CONNECTION
More informationHIGH VELOCITY WATER SPRAY NOZZLE (BRASS)
HIGH VELOCITY WATER SPRAY NOZZLE (BRASS) TECHNICAL DATA MODEL MAXIMUM WORKING PRESSURE EFFECTIVE WORKING PRESSURE END CONNECTION MATERIAL DESCRIPTION HV-AS with strainer 12 Bar (175 PSI) 3.5 Bar to 10.5
More informationData Sheet 11.1 Issue A
TECHNICAL DATA : MODEL A & B Data Sheet 11.1 Page 1 of 6 MAXIMUM WORKING PRESSURE MINIMUM EFFECTIVE WORKING PRESSURE END CONNECTION MATERIAL 12.3 Kg./Sq.Cm. (175 psi) 7 Kg./Sq.Cm. (100 psi) maximum 1.4
More informationTECHNICAL DATA SHEET. Medium Velocity Water Spray Nozzle. Page 1. Description. Technical and Environmental Specification. Installation & Maintenance
Description The LIFECO s are open type (non-automatic nozzles, designed for directional spray application in fixed fire protection system. Medium velocity water spray nozzle has an external deflector,
More informationMEDIUM VELOCITY WATER SPRAY NOZZLE
MEDIUM VELOCITY WATER SPRAY NOZZLE TECHNICAL DATA MODEL MV-A & MV-AS Brass Material MV-B & MV-BS Stainless Steel Material MV-E is with Aluminium Bronze Material TYPE MV-A, MV-B & MV-E are without strainer
More informationData Sheet Issue E
Data Sheet. General Description s are open type (nonautomatic) nozzles, designed for directional spray application in fixed fire protection system. Medium velocity water spray nozzle has an external deflector,
More informationMEDIUM VELOCITY WATER SPRAY NOZZLE
MEDIUM VELOCITY WATER SPRAY NOZZLE HD FIRE PROTECT TECHNICAL DATA MODEL MV-A & MV-AS Brass Material MV-B & MV-BS Stainless Steel Material MV-E is with Aluminium Bronze Material TYPE MV-A, MV-B & MV-E are
More informationDELUGE VALVE DATA SHEET
FIRE FIGHTING EQUIPMENT DATA SHEET DELUGE VALVE DATA SHEET JOB NO. : RFQ. NO. : ISSUE : SHEET OF 01 CUSTOMER : ITEM NO. : 02 PROJECT : QUANTITY : 03 LOCATION : SERVICE : FIRE WATER AND / OR FOAM SYSTEM
More informationSPRAYTECS Series UP High Velocity Directional Spray Nozzles, Open, Non-Automatic. Suitable for Water Spray fixed systems.
Spraytecs technologies ltd SPRAYTECS Series UP High Velocity Directional Spray Nozzles, Open, Non-Automatic. Suitable for Water Spray fixed systems. Technical Data General Description The SPRAYTECS Series
More informationModel F822 thru F834 Mulsifyre Directional Spray Nozzles, Open, High Velocity General Description
Technical Services: Tel: () 31-931 / Fax: () 791-55 Model F thru F3 Mulsifyre Directional Spray Nozzles, Open, High Velocity General Description The Mulsifyre Nozzles are open (nonautomatic) nozzles and
More informationMODELS F822 THRU F834
MULSIFYRE@ NOZZLES MODELS F822 THRU F834 *PASSES A 4s PARTICLE 1 /(6 (27mm) ACROSS WRENCH FLATS FIGURE A MODELS F822 THRU F834 MULSIFYRE NOZZLES GENERAL DESCRIPTION The Mulsifyre Nozzles are open (nonautomatic)
More informationDirectional Spray Nozzles, Open, with Strainers High Velocity General Description
Worldwide Contacts www.tyco-fire.com Model FS Through F3S Mulsifyre Directional Spray Nozzles, Open, with Strainers High Velocity General Description The Model FS through F3S Mulsifyre Nozzles are open
More informationGW THERMOCOOL NOZZLE STRUCTURAL STEEL PROTECTION
DESCRIPTION The GW Thermocool nozzle is a reverse action open nozzle. It is designed for fire protection of structural steel, and the specially developed water distribution pattern provides protection
More informationmodel E Spray nozzles vk810 - vk817
Page 1 of 10 1. DESCRIPTION Viking Model E, 3D Spray Nozzles are open type spray nozzles designed for directional spray applications in fixed fire protection systems. They have an open design only (nonautomatic)
More informationTECHNICAL DATA VK810 (65 ) VK811 (80 ) VK812 (95 ) VK813 (110 )
February 11, 2005 Spray Nozzle 32 a 1. PRODUCT NAME Viking Model E Spray Nozzles VK810 - VK817 65, 80, 95, 110, 125, 140, 160, and 180 Pattern 1.2, 1.8, 2.3, 3.2, 4.1, 5.6, 7.2 nominal U.S. K-Factors Available
More informationType D3S PROTECTOSPRAY Directional Spray Nozzles, Open, Medium Velocity General Description. Technical Data. Page 1 of 6 AUGUST 2018 TFP804
Worldwide Contacts www.tyco-fire.com Type D3S PROTECTOSPRAY Directional Spray Nozzles, Open, Medium Velocity General Description The Type D3S Protectospray Nozzles are open (non-automatic) directional
More informationDELUGE VALVE MODEL: SD-DVA TECHNICAL DATA : VALVE OPERATION TRIM DESCRIPTION DESCRIPTION PRESSURE THREADED OPENING
DELUGE VALVE MODEL: SD-DVA TECHNICAL DATA : NOMINAL SIZE MATERIAL MAXIMUM SERVICE PRESSURE 200, 150, 100, 80 & 50NB Cast Iron 12 Bar (175 PSI) THREADED OPENING MOUNTING FACTORY HYDROSTATIC TEST PRESSURE
More informationSOLID CONE SPRAY NOZZLES TECHNICAL DATA
November 2, 2007 Spray Nozzle 20 SOLID CONE SPRAY NOZZLES 1. DESCRIPTION Viking Model A-2, A-2X, B-2, C-2, and D-2 Solid Cone Spray Nozzles are non-automatic pattern, open, directional discharge spray
More informationType EA-1 PROTECTOSPRAY Directional Spray Nozzles, Automatic, Medium Velocity General Description
Worldwide Contacts www.tyco-fire.com Type EA-1 PROTECTOSPRAY Directional Spray Nozzles, Automatic, Medium Velocity General Description IMPORTANT Always refer to Technical Data Sheet TFP700 for the INSTALLER
More informationGW M5 WATER MIST NOZZLE K-5, LOW PRESSURE, NON-AUTOMATIC
DESCRIPTION The GW M5 is a compact low pressure water mist nozzle specifically developed for use in total and local protection water mist fire extinguishing systems both for marine and land based applications.
More informationSection E Fine Spray Nozzles
Section E Fine Spray s Overview Our fine spray hydraulic atomizing nozzles are available in two styles. Standard s: Traditional threaded nozzles made of metal. Quick-Connect s: Consisting of a nozzle body
More informationTECHNICAL DATA OBSOLETE
April 13, 2007 Spray Nozzle 31a 1. DESCRIPTION Viking Frame Style Spray Nozzles are small, directional spray nozzles for use on water spray systems. They are thermosensitive glass bulb style nozzles, however
More informationTECHNICAL DATA. Table Standard Materials
Page 1 of 9 1. GENERAL DESCRIPTION The In-Line Balanced Pressure (ILBP) Proportioner is a foam proportioning device which is used to balance the higher foam concentrate pressure to the lower system water
More informationIn-Line Balanced Pressure Proportioner (ILBP) Proportioning Devices Model KBP
1 General description The KCA In-Line balanced pressure proportioner (ILPB) is a foam proportioning device which is used to balance the higher foam concentrate pressure to the lower system water pressure
More informationQ= C. v P S Refer to Table 1 for part numbers and shipping weights. Accessories: Table 1: Valve Part Numbers and Specifications
1 of 9 1. DESCRIPTION The Viking Flow Control Valve is a quick opening, differential diaphragm flood valve with a spring loaded floating clapper. The Flow Control Valve can be used to facilitate manual
More informationModel DV-5 Deluge Valve, Diaphragm Style, 1-1/2 thru 8 Inch (DN40 thru DN200), Deluge System Electric Actuation
Deluge Valve DV-5 Model DV-5 Deluge Valve, Diaphragm Style, 1-1/2 thru 8 Inch (DN40 thru DN200), Deluge System Electric Actuation GeneralDescription The Model DV-5 Deluge Valve (described in Technical
More informationFRAME STYLE SPRAY NOZZLES TECHNICAL DATA
Page 1 of 5 1. DESCRIPTION Viking Frame Style Spray Nozzles are small, directional spray nozzles for use on water spray systems. They are thermosensitive glass bulb style nozzles, however they may be ordered
More informationWorldwide Contacts.
Worldwide Contacts www.tyco-fire.com DV-5 Remote-Resetting, Pressure-Reducing Deluge Valve, Limited Space Valve Cabinet General Description The TYCO DV-5 Remote-Resetting, Pressure-Reducing Deluge Valve,
More informationHollow cone nozzles.
Absorption Chemical process engineering Cooling isinfection esuperheating ust control Fire protection Foam destruction Gas treatment umidification of air, goods, or textiles Oil spraying Protection of
More informationTECHNICAL ASSISTANCE TOLL FREE TELEPHONE NUMBER TECHNICAL ASSISTANCE FAX:
ACORN SAFETY P.O. BOX 3527 CITY OF INDUSTRY, CA 91744-0527 UNITED STATES OF AMERICA WWW.ACORNSAFETY.COM INSTALLATION, OPERATION AND MAINTENANCE INSTRUCTIONS PEDESTAL EYE/FACEWASH Models S0310 / S0320 /
More informationmirage standard and Qr concealed pendent sprinkler vk462 and hp sprinkler vk463 (K5.6)
Page 1 of 7 1. DESCRIPTION Viking Mirage Standard and Quick Response Concealed Pendent VK462 and HP VK463 are thermosensitive glass-bulb spray sprinklers designed for installation on concealed pipe systems
More informationFoam Maker Discharge Devices Model KLF
1 General description Foam makers are in-line fixed foam aspirating devices. They are used in low expansion foam discharge applications to protect tank farm dikes and other low-level discharge applications.
More informationCNC DISTRIBUTION. ITEM NO Description Quantity
Valves CNC DISTRIBUTION Brass Ball Valves ITEM NO IPS Ball Valve *600# PSI WOG 150 PSI WSP * Heavy Pattern Forged Brass Construction *Full Port For Maximum Flow *Teflon Seats * Teflon Stem Packing * AGA,
More informationANGLE VALVES 300LB. RATED OPTIONAL FINISHES: PB- Polished Brass RC- Rough Chrome Plated PC- Polished Chrome Plated U/L LISTED NY BSA/MEA APPROVED
HOSE VALVES 5000 SERIES ANGLE VALVES 300LB. RATED NPT inlet and male hose thread outlet cast brass valve with wheel with wheel handle 5010-5015 PB- Polished Brass RC- Rough Chrome Plated PC- Polished Chrome
More informationTECHNICAL DATA. Viking Technical Data may be found on Style: 90 Degree Pattern (inlet to outlet)
Flow Control 500a DESCRIPTION The Viking 1-1/2 is a quick opening, differential type flood valve with a spring loaded rolling diaphragm clapper. The can be used to facilitate manual or automatic on/off
More informationTECHNICAL DATA 1-1/2 (dn40)
July 1, 2011 Deluge Valves 209a DESCRIPTION The Viking Model E-3 1-1/2 Deluge Valve is a quick-opening, differential type flood valve with a rolling diaphragm clapper. The deluge valve is used to control
More informationI-VICFLEX.AB7 VicFlex Sprinkler Fittings for Ceiling Suspension Systems STYLE AB7
INTRODUCTION WARNING Read and understand all instructions before attempting to install any Victaulic VicFlex products. Wear safety glasses, hardhat, and foot protection. These installation instructions
More informationTECHNICAL DATA. Q= C v P S
1 of 9 1. DESCRIPTION The Viking Model E-1 Deluge Valve is a quick-opening, differential diaphragm, flood valve with one moving part. The deluge valve is used to control water flow in deluge and preaction
More informationG1849 Eyewash, Deck Mounted, AutoFlow 90º Swing-Down
Eyewashes G1849 Eyewash, Deck Mounted, AutoFlow 90º Swing-Down G1849LH-L G1849LH G1849LH-R G1849L G1849 G1849R Model G1849LH-L Shown Application: AutoFlow eyewash for mounting on counter. Spray heads swing
More informationTECHNICAL DATA. Q= C v P S FLOW CONTROL VALVE MODEL J-2 HALAR COATED 1-1/2 & 2 (DN40 & DN50) 1. DESCRIPTION
Page 1 of 9 1. DESCRIPTION The Viking Flow Control Valve is a quick opening, differential diaphragm flood valve with a spring loaded floating clapper. The Flow Control Valve can be used to facilitate manual
More informationFIRE SPRINKLER SYSTEM
CD Alarm Check Valve SAV-CD-100 (Alarm Valve) SAV-CD-150 (Alarm Valve) Size (mm) Standard Material Rated Pressure Test Pressure Marking Flange Dimension Installation SAG-CD (Alarm Gong) SAG-CD (Alarm Gong)
More informationQ= C v P S. Flow control valve Model j-2 Halar coated
October 22, 2010 Flow Control 507a 1. DESCRIPTION The Viking Flow Control Valve is a quick opening, differential diaphragm flood valve with a spring loaded floating clapper. The Flow Control Valve can
More informationInstructions for Installation, Operation, Care and Maintenance
Bulletin 407 Rev. T Model E Alarm Check Valve Bulletin 407 Rev. T Instructions for Installation, Operation, Care and Maintenance 4 (100 mm), 6 (150 mm), 8 (200 mm) Sizes With Model E3 Trim Listed by Underwriters
More informationFoam Ratio Controller Proportioning Devices Model KFP
1 General description The KCA ratio controller accurately proportions foam concentrate into a water stream over a wide range of water flow rates. The controller proportions foam at concentrations of 1%
More informationTECHNICAL ASSISTANCE TOLL FREE TELEPHONE NUMBER TECHNICAL ASSISTANCE FAX:
ACORN SAFETY P.O. BOX 3527 CITY OF INDUSTRY, CA 91744-0527 UNITED STATES OF AMERICA WWW.ACORNSAFETY.COM INSTALLATION, OPERATION AND MAINTENANCE INSTRUCTIONS DECK MOUNTED EYE/FACEWASH Model S0730 / S0740
More informationPrice Book - Section 7 Nozzles and Sprinkler Accessories
Effective Date Price Book - Protectospray Nozzles Model D-3 Orifice Size #16 to #34 Inclusive with 1 /2" NPT Connection, Brass Protectospray Nozzles Protectospray Nozzles are available as open nozzles
More informationPrice Book - Section 7 Nozzles and Sprinkler Accessories
Effective Date Price Book - Protectospray Nozzles Model D-3 Orifice Size #16 to #34 Inclusive with 1 /2" NPT Connection, Brass Protectospray Nozzles Protectospray Nozzles are available as open nozzles
More informationInstallation & Design Maintenance for ILBP System
Installation & Design Maintenance for ILBP System Before installation of the Chemguard ILBP system(s), check all components to ensure that no damage has occurred during shipment and read the manual before
More informationHollow Cone Spray Nozzles Series
Hollow Cone Spray Nozzles Series TANK WASHING HOLLOW CONE APPLICATION Absorption Chemical process engineering Cooling Disinfection Desuperheating Dust control Fire protection Foam destruction Gas treatment
More informationPortable Sealcoating Spray Systems
Portable Sealcoating Spray Systems Operator s Manual RA-SSY-0005 RA-SSY-0004 RA-SSY-0013 RA-SSY-0011 RA-SSY-0003 RA-SSY-0012 * RA-SSY-0005 Pictured Above 1 SAFETY WARNING Read all instructions and warnings
More informationTECHNICAL DATA Code No. SFM-OH1 SFM-OH2 SFM-OH3 SFM-OH3S SFM-XHH-10 SFM-XHH-7.5 SFM-XLH
Flow Meter SFM-OH1 SFM-OH2 SFM-OH3 SFM-OH3S SFM-XHH-10 SFM-XHH-7.5 SFM-XLH Gauge SFG-OH1 SFG-OH2 SFG-OH3 SFG-OH3S SFG-XHH-10 SFG-XHH-7.5 SFG-XLH Type OH1 OH2 OH3 OH3 Special XHH 10mm/min XHH 7.5mm/min
More informationNessie Water Mist Nozzles
Data Sheet Nessie Water Mist Nozzles Applications The nozzles are tailored to atomize water in high pressure water mist systems. The nozzles are very suitable for applications within e.g.: Humidification
More informationTank Sealcoating Spray Systems
Tank Sealcoating Spray Systems Operator s Manual RA-SSY-0008 RA-SSY-0002 RA-SSY-0007 RA-SSY-0009 RA-SSY-0006 RA-SSY-0010 * RA-SSY-00008 Pictured Above 1 SAFETY WARNING Read all instructions and warnings
More informationDV-5a Automatic Water Control Valve Single Interlock Preaction Fire Protection Systems 1-1/2 Inch to 8 Inch (DN40 to DN200) General Description
Worldwide Contacts www.tyco-fire.com DV-5a Automatic Water Control Valve Single Interlock Preaction Fire Protection Systems 1-1/ Inch to Inch (DN40 to DN00) General Description The TYCO DV-5a Automatic
More informationTECHNICAL DATA. Q= C v P Cv = Flow Factor (GPM/1 PSI P)
1 of 9 1. DESCRIPTION The Viking 2 (DN50) is a quick-opening, differential diaphragm, flood valve with one moving part. The deluge valve is used to control water flow in deluge and preaction sprinkler
More informationDIKE AND SPILL PROTECTION
1 DIKED AREA Dikes are typically constructed around above ground storage tanks. They are contours of land or physical barriers that will retain fuel to a depth greater than 1". At many manufacturing or
More informationEye/Face Washes. FF G1778 Eye/FaceFWash,FWallFMountedFAutoFlow F90 FSwing-Down FFG1778LH-L FFG1778LH-R G1778L G1778LH G1778 G1778R.
Eye/Face Washes G1778 Eye/FaceFWash,FWallFMountedFAutoFlow F90 FSwing-Down G1778LH-L G1778LH G1778LH-R G1778L G1778 G1778R Units shown in plan view Model G1778LH-L Shown Application: AutoFlow eye/face
More informationTUV India Private Ltd. APPROVED
TUV India Private Ltd. DELUGE VALVES HD Deluge Valves are automatic reset or field manual reset type. The valves are intended for use in deluge, pre-action, foam water system and many more fire protection
More informationApplication & Reference Data Typical Specifications. Section 914 Vertical Turbine Fire Pump
Section 914 Page 101 Supersedes Section 913 Page 101 Dated November 1, 199p Application & Reference Data Typical Specifications Section 914 Section 914 Page 102 Supersedes Section 913 Page 102 Dated November
More information007 Tank Monitor. WARNING Never use with gasoline or highly flammable liquids.
Model #7575 Recommended Installation, Maintenance and Inspection Instructions 007 Tank Monitor 7575 Important safety instructions - save these instructions in a readily accessible location. WARNING Never
More informationDEMA MODELS P203CTC.PI.1,.2,.3 INSTALLATION INSTRUCTIONS
I. PARTS: A. 1 pc. Cyclone Portable Injector B. 1 pc. Foot Strainer & 1/4" I.D. Tubing. C. 1 pc. Ceramic Weight. D. 1 pc. Instruction Sheet D. 2 pc. 3 hose w/ female x female GHT fittings on both ends
More informationALARM CHECK VALVE 3", 4" & 6" MODEL H-1 FLANGE/FLANGE 3" & 4" MODEL H-2 GROOVE/GROOVE 3", 4" & 6" MODEL H-3 FLANGE/GROOVE
DESCRIPTION AND OPERATION The Globe Model H-1, H-2 and H-3 Alarm Check Valves are used in wet pipe fire sprinkler systems. They primarily serve a dual purpose in that they prevent a reverse flow of water
More informationSection J Air Control Nozzles
Section J Overview Our extensive line of air control nozzles, used in drying and blowing applications, includes products that use regenerative blowers and products that require compressed air. WindJet
More informationTECHNICAL ASSISTANCE TOLL FREE TELEPHONE NUMBER TECHNICAL ASSISTANCE FAX:
ACORN SAFETY P.O. BOX 3527 CITY OF INDUSTRY, CA 91744-0527 UNITED STATES OF AMERICA WWW.ACORNSAFETY.COM INSTALLATION, OPERATION AND MAINTENANCE INSTRUCTIONS COMPACT RECESSED EYEWASH/FACEWASH MODELS S0560
More informationAutomatic Roof Door Vents
DATA SHEET Automatic Roof Door Vents Features n UL Listed for use as an automatic smoke vent n FM Approved as an automatic door vent for use in high expansion foam systems n Available in multiple sizes
More informationTECHNICAL ASSISTANCE TOLL FREE TELEPHONE NUMBER TECHNICAL ASSISTANCE FAX:
ACORN SAFETY P.O. BOX 57 CITY OF INDUSTRY, CA 97-057 UNITED STATES OF AMERICA WWW.ACORNSAFETY.COM INSTALLATION, OPERATION AND MAINTENANCE INSTRUCTIONS COMBINATION STATIONS, RECESSED ACTIVATION Models:
More informationFull cone nozzles.
nozzles Absorption Chemical process engineering Chlorine precipitation Cleaning Cooling esuperheating ust control Fire protection Foam control as treatment ing onto mats in air washers ing over packings
More informationTECHNICAL DATA. Table Standard Materials
Page 1 of 8 1. GENERAL DESCRIPTION Foam Chambers are suitable for the protection of fixed roof-mounted tanks and are to be used as low expansion Type II discharge devices (as defined by NFPA11) with approved
More informationTECHNICAL DATA. Inlet Type Outlet Type OBSOLETE 6 (DN150)
January 13, 2006 Deluge Valves 211 a 1. PRODUCT NAME Viking Model E-1 Deluge Valve 3 (DN80) Available since 1985 4 (DN100) Available since 1985 6 (DN150) Available since 1984 2. MANUFACTURER THE VIKING
More informationCHEMICAL INJECTION PASSIVATING COATING STERILIZING FOGGING HUMIDIFYING MISTING COATING MOISTURIZING GAS COOLING LUBRICATING
AIR SPRAY NOZZLES CHEMICAL INJECTION PASSIVATING COATING STERILIZING FOGGING HUMIDIFYING MISTING COATING MOISTURIZING GAS COOLING LUBRICATING C1 AIR NOZZLES INTRODUCTION LARGEST SELECTION OF NOZZLES IN
More informationSolenoid Operated Block Valves A2800 Series
Solenoid Operated Block Valves A2800 Series Installation and Parts Liquid Controls An IDEX Fluid & Metering Business Installation: M400-40 Table of Contents Introduction Safety Procedures... 3 A2800 Series
More informationProduct Data Screwed Valve bodies
Screwed Valve bodies Brass and Chrome PVC 316 Stainless Steel Flow Control Check Valves - 15mm Flow Control Check Valves - 25mm AUSTRALIA Brass & Chrome Screwed bodies p. 26 Specifications Valve bodies
More informationBack Check Valves A2885 & A2883 (LPG) A2882 (Refined Fuels)
Back Check Valves A2885 & A2883 (LPG) A2882 (Refined Fuels) Installation and Parts L I Q UID C O N T R O L S An IDEX Energy & Fuels Business LC_IOM_BackcheckValves: V2: 0317 TABLE OF CONTENTS INTRODUCTION
More informationAmerex Modular Dry Chemical Vehicle Fire Suppression System
Amerex Modular Dry Chemical Vehicle Fire Suppression System MODELS V13 ABC & V13 PK V25 ABC & V25 PK VH25 ABC & VH25 PK VH30 ABC V50 ABC & V50 PK VS50 ABC & VS50 PK VS75 ABC V250 ABC INSTALLATION, OPERATION,
More informationInstructions for Installation, Operation, Care and Maintenance
Model D Dry Pipe Valve Bulletin 350 Rev. S Bulletin 350 Rev. S Instructions for Installation, Operation, Care and Maintenance 4 (100mm) 6 (150mm) Valve With Model D Trimmings Listed by Underwriters Laboratories,
More informationModel VKFD28 Flexible Sprinkler Drops (LPCB Approved) Installation Manual. January 2016 Form No. F_ Rev 16.1
Model VKFD28 Flexible Sprinkler Drops (LPCB Approved) Installation Manual January 2016 Page 2 of 10 TABLE OF CONTENTS Section Description Page 1 Benefits 3 2 Installation Instructions 3 3 Technical Data
More informationTECHNICAL ASSISTANCE TOLL FREE TELEPHONE NUMBER TECHNICAL ASSISTANCE FAX:
ACORN SAFETY P.O. BOX 3527 CITY OF INDUSTRY, CA 91744-0527 UNITED STATES OF AMERICA WWW.ACORNSAFETY.COM INSTALLATION, OPERATION AND MAINTENANCE INSTRUCTIONS COMBINATION STATIONS Models: S1310, S1320, S1330,
More informationTechnical Data. UL Listing is based on the following criteria:
Worldwide Contacts www.tyco-fire.com DV-5 Deluge Valve with Trim Inch and 6 Inch (DN1 and DN15) General Description The TYCO DV-5 Deluge Valve with Trim is a diaphragm-style valve that depends upon water
More informationB21 Series BASOTROL Gas Valve
Installation Instructions B21 Issue Date September 19, 2017 Installation IMPORTANT: These instructions are intended as a guide for qualified personnel installing or servicing BASO Gas Products. Carefully
More informationModel 540 PRESSURE REGULATOR VALVE FOR ABOVE GROUND STORAGE TANKS WITH SUCTION TYPE ISLAND DISPENSERS
Model 540 PRESSURE REGULATOR VALVE FOR ABOVE GROUND STORAGE TANKS WITH SUCTION TYPE ISLAND DISPENSERS INSTALLATION INSTRUCTIONS UNIVERSAL VALVE COMPANY, INC. 478 SCHILLER ST. ELIZABETH, NJ 07206 Rev A
More informationTECHNICAL DATA. Table Standard Materials
Page 1 of 8 The Viking Corporation, 21 N Industrial Park Drive, Hastings MI 4958 Telephone: 269-945-951 Technical Services: 877-384-5464 Fax: 269-818-168 Email: techsvcs@vikingcorp.com 1. GENERAL DESCRIPTION
More informationGRAFIK TM BF1356-XXX-200 PREMIA : T375 Thermostatic Shower System SPECIFICATIONS
GRAFIK TM BF1356-XXX-200 PREMIA : T375 Thermostatic Shower System Components included BF1397-XXX: Rainhead with 90 wall arm (2 direct positions and 1 shared position) 103579-XXX: 2-jet handshower (2 direct
More informationDV-5 Deluge Valve, Diaphragm Style, 1-1/2 thru 8 Inch (DN40 thru DN200), Deluge System Wet Pilot Actuation General Description
Worldwide Contacts www.tycofire.com DV Deluge Valve, Diaphragm Style, / thru Inch (DN0 thru DN00), Deluge System Wet Pilot Actuation General Description The DV Deluge Valve (described in Technical Data
More informationTECHNICAL DATA. Trimpac 244a. April 15, 2011
April 15, 2011 Trimpac 244a 1. DEsCrIpTION DESCRIPTION TRIMPAC Model B-1 and B-1B is a factory-assembled trim package with an electric release module in a metal enclosure. The standard trim normally required
More informationINLINE FOAM INDUCTOR HD FIRE PROTECT PVT. LTD. TECHNICAL DATA DESCRIPTION SPECIFICATION APPLICATION SYSTEM DESIGN DETAILS
INLINE FOAM INDUCTOR HD FIRE PROTECT PVT. LTD. TECHNICAL DATA MODEL OPERATING PRESSURE IG - Bronze material IS - Stainless Steel material 6.5 to 12 BAR (93-175 PSI) FACTORY 25 BAR (365 PSI) HYDROSTATIC
More informationUsed for Safety Shower combination stations: SE-603 SE-616 SE-690 SE-693 SE-695 SE-697
INSTRUCTIONS FOR MODELS Used for Safety Shower combination stations: SE-60 SE-616 SE-690 SE-69 SE-695 SE-697 Pipe Wrench Adjustable Wrench TOOLS AND SUPPLIES Strap Wrench Hex Key Wrench Level Not Included
More informationFire Protection Valves
Fire Protection Valves 1002 C O N T E N T S Terms and Conditions - Page 30 Angle Valves... 7-9 Ball Valves... 1-3 Ball Drip Valves...18 Check Valves, Grooved (Ductile)... 29 Check Valves, Screwed (Ductile)...28
More informationWet pipe low flow foam/water manifold system
December 6, 2010 Foam 15a 1. Description With the Wet Pipe Low Flow Foam/Water Manifold System, multiple risers can be supplied from a single proportioning device. A riser manifold is installed with various
More informationTECHNICAL DATA. Trimpac 249a. September 16, 2013
September 16, 2013 Trimpac 249a 1. DESCrIpTION DESCRIPTION TRIMPAC Model B-4, B-4B & B-4S is a factory assembled trim package for a single interlocked with a pneumatic release module in a metal enclosure.
More informationHollow Cone Nozzles. The H series nozzle option diverts flow at a right angle without an internal vane, thereby reducing the risk of blockage.
lower energy ring of spray useful for low flow, low impact applications. The internal geometry swirls fluid into a circular ring spray pattern. tomisation occurs at low pressures. The H series nozzle option
More informationMAXIMUM FREE PASSAGE FULLJET SPRAY NOZZLES UNIQUE DESIGN MINIMIZES CLOGGING, PROVIDES SUPERIOR PERFORMANCE
MAXIMUM FREE PASSAGE FUJET SPRAY NOZZES UNIQUE DESIGN MINIMIZES COGGING, PROVIDES SUPERIOR PERFORMANCE The liquid comes in contact with the vane as it enters the nozzle. The unique vane design stabilizes
More informationPeerless Pump FIRE PUMPS. Horizontal Split-Case, Vertical Turbine, In-Line and End Suction. Sterling Fluid Systems (USA), Inc.
Peerless Pump FIRE PUMPS Split-Case, Vertical Turbine, In-Line and End Suction Sterling Fluid Systems (USA), Inc. Brochure B-1500 Fire Protection Fire Pump Units & Packaged Systems You have decided to
More informationUltraJet Nozzle. AKRON BRASS COMPANY PH ( ) akronbrass.com
UltraJet Nozzle 4 AKRON BRASS COMPANY PH. 800.228.1161 (330.264.5678) akronbrass.com The UltraJet combines the powerful punch of a true smooth bore and the widespread protection of a full fog. This nozzle
More informationEcco Fire Extinguishers
Fire Extinguishers Dry Chemical Extinguishers Drawn Cylinder Reduced Neck Problems Rugged Construction Powder Coat Finish UV Rated Paint Pull Ring Retainer fitted on all units Hose Retainer fitted on all
More information1/8" to 1/4" female conn. Flow rates of 1 gpm and greater at 40 psi (3.8 lpm and greater at 2.8 bar)
VEEJET NOZZES FAT SPRAY OVERVIEW: VEEJET SPRAY NOZZES Flat spray pattern distributes the liquid as a flat- or sheet-type spray Uniform distribution over a wide range of flow rates and pressures Spray angles
More informationTable 1. Table 2. Table 3: Toxicology/Environmental FM-200 (UL/FM) 14A-07H SECTION 1 - INTRODUCTION. Agent Physical Properties FM-200
02 2010-03 SECTION 1 - INTRODUCTION Agent Physical Properties Table 1. Agent Physical Properties HFC-227ea Chemical structure CF 3 CHFCF 3 Chemical name Heptafluoropropane Molecular weight 170 Boiling
More informationCJ Series Flat Spray Nozzles For Air & Saturated Steam CJ The following description will help to explain our Part Number/ Code in relation to the SPRAYTECH Spray Nozzle. EXAMPLE ORDERING. SPRAYTECH CJ
More informationTECHNICAL DATA TRIMPAC MODEL B-4, B-4B & B-4S SINGLE INTERLOCK PREACTION SYSTEM WITH PNEUMATIC RELEASE
Page 1 of 20 1. DESCRIPTION TRIMPAC Model B-4, B-4B & B-4S is a factory assembled trim package for a single interlocked preaction system with a pneumatic release module in a metal enclosure. The standard
More information