ALUMINUM PIPE RACKING SYSTEM

Transcription

1 Processes connected with flexibility ALUMINUM PIPE RACKING SYSTEM Processes connected with flexibility

2 2 ALUMINIUM PIPE RACKING SYSTEM OVERVIEW Where workplace or mounting systems in aluminium are required, the new round and square aluminium profiles from BeeWaTec are the right choice. The round profiles are available with 28 mm diameter and thus compatible with the existing pipe system. Existing metal joint series may be used together with the aluminium round pipe profiles and also be adapted with the corresponding joint to the new square aluminium profile. With the newly added aluminium joint series the possibilities are even more varied. The square aluminium series is available in the standard profile dimensions 40 x 40 mm, 80 x 40 mm and - in addition to the BeeWaTec square steel profile systems - in 45 x 45 mm. For highest loads, square aluminium profiles with the dimensions 60 x 60 mm are available. ALUMINIUM PIPE RACKING SYSTEM by G.S ACE (page 4) SQUARE ALUMINIUM PROFILES (page 18)

3 ALUMINIUM PIPE RACKING SYSTEM 3 Aluminium pipe racking system can be well integrated in the conventional pipe racking system! (examples of use / page 17)

4 Even easier on target: Aluminium pipe racking system by G.S ACE PIPES... 5 ALUMINIUM JOINTS... 7 ACCESSORIES The aluminium round pipe profile represents an ideal complement to the existing pipe racking system. In addition to the compatibility with the existing pipe racking system still other qualitative benefits are striking: Some highlights of the new aluminium product series: Aluminium pipe racking system can be well integrated into the conventional pipe racking system All metal joints, mounting brackets, accessories etc. can be perfectly combined with the new aluminium pipe racking system by G.S ACE Inner type aluminium joint end flush with the aluminium pipe, which is a direct lie-on possibility for panels (see illustration) High esthetic value without glaring High strength to weight ration Aluminium is environmentally friendly and retains high recycling value

5 ALUMINIUM PIPE RACKING SYSTEM 5 PIPES AP2812SA AP2829SA Profile pipe weight: 378 g/m length: 4 m wall thickness: 1,2 mm Profile pipe weight: 479 g/m length: 4 m wall thickness: 2,9 mm AR2812SA AR2829SA Round pipe weight: 377 g/m length: 4 m wall thickness: 1,2 mm Round pipe weight: 495 g/m length: 4 m wall thickness: 2,9 mm

6 6 ALUMINIUM PIPE RACKING SYSTEM AT2829SA T-profile pipe weight: 605 g/m length: 4 m Slot nuts (with thread) can be mounted in the groove in order to connect different elements. Sliding pipe facilitates linear movements. AE2812SA AD2812SA Slide pipe weight: 408 g/m length: 4 m Sliding pipe facilitates linear movements. Double pipe weight: 784 g/m length: 4 m

7 ALUMINIUM PIPE RACKING SYSTEM 7 ALUMINIUM JOINTS At a glance Aluminium joints A-001 A-007B A-007C A-007D A A-013L, A-013R A-028 A-090 Inner type B-001 B-006 joints 10 B-007A B-007B B-007C B-007D B-008 B-011 B-013L, B-013R B-045 B-090

8 8 ALUMINIUM PIPE RACKING SYSTEM A-001 T-joint weight: 23 g quantity/box: 250 Set AA-001: 2x A-001 1x M0625, 1x TN06 A-007B Swivel joint, counter part weight: 31 g quantity/box: 200 Set AA-007F: 2x A-007B, 2x B-007A 1x M0625, 1x TN06 1x M0620, 1x TN06 A-007C Swivel joint, counter part weight: 27 g quantity/box: 200 Set AA-027F: 2x A-007B, 2x A-007C 2x M0625, 2x TN06 A-007D Swivel joint, counter part weight: 31 g quantity/box: 200 Set AA-027M: 2x A-007C, 2x A-007D 2x M0625, 2x TN06

9 ALUMINIUM PIPE RACKING SYSTEM 9 A-009 Double-T-joint weight: 50 g quantity/box: 100 Set AA-009: 2x A-009 1x M0625, 1x TN06 A-013L, A-013R 45 joint weight: 23 g quantity/box: 250 Set AA-013: 1x A-013L, 1x A-013R 1x M0625, 1x TN06 A-028 Parallel joint weight: 24 g quantity/box: 200 Set AA-028: 2x A-028 1x M0625, 1x TN06 A joint weight: 50 g quantity/box: 80 Set AA-090: 2x A-090 1x M0625, 1x TN06

10 10 ALUMINIUM PIPE RACKING SYSTEM Inner type aluminium joints B-001 T-joint weight: 18 g quantity/box: 300 Set BA-001: 2x B-001 1x M0625, 1x TN06 B joint weight: 12 g quantity/box: 400 Set BA-006: 2x B-006 1x M0620, 1x TN06 B-007A Swivel joint, counter part weight: 17 g quantity/box: 400 Set BA-007F: 2x B-007A, 2x B-007B 2x M0620, 2x TN06 B-007B Swivel joint, counter part weight: 25 g quantity/box: 250 Set BA-027F: 2x B-007B, 2x B-007C 2x M0620, 2x TN06

11 ALUMINIUM PIPE RACKING SYSTEM 11 B-007C Swivel joint, counter part weight: 23 g quantity/box: 250 Set BA-027M: 2x B-007C, 2x B-007D 2x M0620, 1x TN06 B-007D Swivel joint, counter part weight: 24 g quantity/box: 250 Set BA-007R: 2x B-007A, 2x B-007D 2x M0620, 1x TN06 B-008 Parallel joint weight: 9 g quantity/box: 400 Set BA-008: 2x B-008 1x M0620, 1x TN06 B-011 Parallel joint weight: 30 g quantity/box: 200 Set BA-011: 2x B-011 2x M0620, 2x TN06

12 12 ALUMINIUM PIPE RACKING SYSTEM B-013L, B-013R 45 joint weight: 18 g quantity/box: 300 Set BA-013: 1x B-013L, 1x B-013R 1x M0620, 1x TN06 B-045 Corner joint weight: 48 g quantity/box: 100 Set BA-045: 2x BA-045 2x M0620, 2x TN06 B joint weight: 38 g quantity/box: 150 Set BA-090: 2x B-090 1x M0620, 1x TN06

13 ALUMINIUM PIPE RACKING SYSTEM 13 ACCESSORIES BA2800A/B Aluminium drive-in bush weight: 17 g quantity/box: 300 BA2800A BA2800B A Tap 1/2 12N M12 p1.75 GAP-4A Cover caps weight: 3 g quantity/box: 1500 GAP-4AT Cover caps for AT-pipes weight: 2 g quantity/box: 1500 LP2800 ELF-plate weight: 0,2 g quantity/box:

14 14 ALUMINIUM PIPE RACKING SYSTEM AH-540 Aluminium sleeve / add-on joint (short version) weight: 30 g quantity/box: 140 AH-555 Aluminium sleeve / add-on joint (long version) weight: 40 g quantity/box: 110 ACM-500 Aluminium castor mount weight: 54 g quantity/box: 100

15 ALUMINIUM PIPE RACKING SYSTEM 15 Bolts and nuts wrench bolt, with socket head cap T-nut WZ WZ M0625 M6x25 wrench bolt, with socket head cap TN06 M6 hexagonal nut WZ M0620 M6x20 WZ wrench bolt, with socket head cap, safety lock bolt GM815 M8x15 WZ M0625-LP M6x25 wrench bolt, with socket head cap, safety lock bolt WZ M0620-LP M6x20 Feet support For drive-in bush type A (1/2 thread) AD32... AD50... Normal type Foot support 1/2" 12N foot Ø L ELF AD32WB 32 mm 50 mm yes AD32WC 100 mm yes AD50WA 50 mm 50 mm yes AD50WB 100 mm yes AD32... AD50... Rubber type Foot support 1/2 12N, rubber insert Standard ELF version foot Ø L AD32RA AD32RA-E 32 mm 70 mm AD32RB AD32RB-E 100 mm AD50RAN AD50RAN-E 50 mm 73 mm AD50RBN AD50RBN-E 123 mm

16 ISSUE JULY Processes connected with flexibility 16 ALUMINIUM PIPE RACKING SYSTEM COMPATIBILITY KNOWS NO LIMITS The BeeWaTec kits for process optimizers, workplace builders and cost reducers Lean manufacturing catalogue Aluminium pipe racking system can be easily integrated into the conventional pipe racking system! The round profiles are available with 28 mm diameter and thus compatible with the existing pipe racking system by G.S ACE. Existing metal joint series may be used together with the aluminium round pipe profiles and also be adapted with the corresponding joint to the new square aluminium profile. With the newly added aluminium joint series the possibilities are even more varied. Find out more about the individual products in the conventional pipe racking system series in our main catalogue! On request we will be grateful to sent it to you. A little taste of what to expect in it: Metal joints GA-1S GA-2S GA-3S GA-6S GA-7S Roller tracks and mounts GP-3533B GP-6016S GP-A35 GP-B35 GP-C35 GP-D35 GP-E35 Lateral guides AL-RG-40B Accessories NP-C-... AD-SM Castors Plates and much more such as logistic systems, milkrun systems and tugger trains, Automated Guided Vehicles...

17 ALUMINIUM PIPE RACKING SYSTEM 17 Examples combination of aluminium and conventional pipe racking system: Accessories can be connected easily by means of the groove. Castors can be assembled fast ane easily. Via conventional joint (e.g. GA-6BK) you can competently mix aluminium and steel pipes. Not only joints, but also pipes can be mixed.

18 To top it makes it, BeeWaTec makes it square: Square Aluminium Profile SQUARE ALUMINIUM PROFILE CONNECTING ELEMENTS.. 20 The square aluminium profiles are available in standard profile dimensions 40 x 40 mm, 80 x 40 mm and in 45 x 45 mm in addition to the BeeWaTec square steel pipe profile systems. For highest loads, square profiles are available with the dimensions 60 x 60 mm, which can be supplemented with integrated lifting systems.

19 SQUARE ALUMINIUM PROFILE 19 SQUARE ALUMINIUM PROFILES Construction profiles and cover profiles AL-4040 Construction profile 40 x 40 mm AL-4545 Construction profile 45 x 45 mm Alu Alu AL-6060 Function profile 60 x 60 mm AL-8040 Construction profile 80 x 40 mm Alu Alu ADP BK Cover profile for covering grooves ADP G Cover profile for covering grooves material: plastic PP material: plastic PP Black Grey ADP Alu Covering profile for covering grooves material: plastic PP Alu

20 20 SQUARE ALUMINIUM PROFILE CONNECTING ELEMENTS VP-40-S BK Joint plate Joint panel for joining two aluminium profiles VP-40-V WZ Joint plate Joint panel for joining two aluminium profiles hole spacing: 40 mm hole spacing: 40 mm Black WZ VPE-40-V WZ joint plate corner 40 Joint panel for joining two aluminium profiles BFK-28 Mounting clamp D28 Mounting clamp for attaching a hydraulic cylinder to a circular pipe WZ IW Internal angle 90 for orthogonal joint with two aluminium profiles IW Internal angle 90 for orthogonal joint with two aluminium profiles for profile type 40 for profile type WZG Tool hanger for hanging tools with a snap hook, sliding in the slot of aluminium profiles

21 SQUARE ALUMINIUM PROFILE GW-40 Joint angle for joining two aluminium profiles 40, in different angles, through the support bush, freely rotatable even in the mounted state GK-45 Joint 45 for a pivoting joint between two profiles or panels, with separate slot fixation GK Joint 180 type 40 for a pivoting joint between two profiles or panels, with separate slot fixation GK Joint 180 type 45 for a pivoting joint between two profiles or panels, with separate slot fixation for profile type 40 for profile type PV-90 Profile joint 90 for front-end joint of two aluminium profiles without profile machining

22 22 SQUARE ALUMINIUM PROFILE HW-28 Bracket 28 for joints between round pipes Ø 28 mm and a square profile VSP-2005 Stiffening profile 20 x 5 for stiffening the aluminium profiles by loosely inserting them into the groove or in the slots in the middle of the profile VSP-1604 Stiffening profile 16 x 04 for stiffening the aluminium profiles by loosely inserting them into the groove or in the slots in the middle of the profile NST-M6 Slot nut M6 swivelling slot nut with guide web and springloaded ball, thread M NST-M8 Slot nut M8 swivelling slot nut with guide web and springloaded ball, thread M GWP-M8 M8 threaded panel for each mount with bolt

23 Processes connected with flexibility SQUARE ALUMINIUM PROFILE 23 REQUEST FOR OUR MAIN CATALOGUE AND INFORM YOURSELF ABOUT OUR COMPREHENSIVE PRODUCT PORTFOLIO! ISSUE JULY The BeeWaTec kits for process optimizers, workplace builders and cost reducers Lean manufacturing catalogue Have you seen our factory equipment catalogue or with more than 28,000 items? See for yourself online: Publisher and production: BeeWaTec GmbH, Kunstmühlestraße 16, DE Pfullingen; Date of publication: September 2014 General notes: Technical changes, further developments, changes of products and modifi cations are reserved, even without previous notifi cation. We assume no guarantee for mistakes in printing, writing and translation. In either case the German catalogue version has precedence. All information is not binding and subject to change.

24 24 Processes connected with flexibility BeeWaTec GmbH Kunstmühlestraße 16 DE Pfullingen Tel. +49 (0) Fax +49 (0) Poland BeeWaTec Polska Sp.z o.o. Sp.k. Ul. Tkacka 17 PL Bielawa Tel. +48 (0) Czech Republic / Slovakia BeeWaTec s.r.o. Komenského 33 CZ Boskovice Tel Fax info@beewatec.cz Switzerland BeeWaTec AG Schürstrasse 17 CH-6062 Wilen (Sarnen) Tel. +41 (0) Fax +41 (0) info@beewatec.ch Hungary / Romania BeeWaTec Hungária Bt. Kiskörösi út HU-6000 Kecskemét Tel. +36 (0) Fax +36 (0) info@beewatec.hu Austria BeeWaTec GmbH Niederlassung Österreich Leopold-Böhm-Straße 10/D53 AT-1030 Wien info@beewatec.at Danmark: Jysk Lagerteknik ApS Nørregade 36 DK-7171 Uldum Tel: info@jysklagerteknik.dk BEE Alu-Broschüre en