JEEP JL INSTALL GUIDE
|
|
- Adele Dawson
- 5 years ago
- Views:
Transcription
1 JEEP JL INSTALL GUIDE
2 S-TECH Switch Systems DEVELOPED, DESIGNED, MANUFACTURED and Assembled in the Rocky Mountains of Colorado, known to many as JEEP COUNTRY. Trail riding at 10,000 feet at night requires great lighting and a well-engineered switch system. That is where S-TECH was developed and tested. Simple solutions to Off-Road challenges results in reliability, safety and convenience. Our Made in the USA injection molded switch housing and plug and play wire harness has a pure OEM look and feel second to none. Please take a moment to read the following instructions and procedures. Since you will be drilling and cutting into parts of your vehicle, we highly suggest that you consider using either a service professional or use professional techniques and practices while installing your S-TECH Switch System. REMEMBER: Be a Pro! Always measure twice and cut once. Included in Kit One (1) Custom Jeep JL ABS Switch Housing Dual LED Rocker Switches One (1) Power Control Module Box & Cover One Custom Plug and Play Wiring Harness One (1) Custom Powder Coated Bracket Eight (8) Nylon HD Cable Ties 50# Tensile 7" Black Two (2) 1/4-20 x 3/4" Hex Cap Screw s Two (2) 1/4-20 Nyloc Nuts Two (2) 6-32x3/4 Black Hex Set Screws Two (2) Stainless Hex Keps Lock Nuts Instructions and Link to Installation Video Made in the USA Sticker Team Tech Offroad Sticker S-TECH Switch Systems Sticker Optional Carbon Fiber and Stainless Faceplate Options Shown 2 STechSwitch.com sales@stechswitch.com Conifer Rd. # Conifer, CO
3 Please check our website, under INSTALLATION/UPDATES for the latest in installation updates and helpful hints to your installation. 01 Open the S-TECH box and familiarize yourself with all of the parts that you will be using during the install Remove the S-TECH Switch Housing 02 *Optional Carbon Fiber and Stainless Faceplate Options Shown 03 Remove the S-TECH Wire Harness and Control Box 04 Cut Cable Ties on S-TECH Wire Harness WARNING: Be sure NOT to cut into the wire harness STechSwitch.com Conifer Rd. # Conifer, CO
4 05 Using the provided mounting bracket, mount the distrubution box near the battery on the passenger side. You will reuse the two factory bolts shown here. Tighten both bolts to original factory specifications 06 Attach the ground wire in the harness to the stud located just to the right of the mounting bracket Before working with the battery and related parts, disconnect the primary ground 07 Next, attach the power wire from the provided harness to one of the side mounts on the main battery. (right) 4 STechSwitch.com sales@stechswitch.com Conifer Rd. # Conifer, CO
5 IDENTIFY WIRE LEADS: Familiarize yourself with all of the wire circuits. Please check our website, under INSTALLATION/UPDATES for the latest in installation updates and helpful hints to your installation. WIRE ID A = Output Wires 1, 2, 3, 4 B = Small Accessory Red Wire (Fuse Block, connect to Fuse tab and insert in Fuse Block Position M9 C = Big Red Wire (12V Battery) D = Black Wire (Ground) A D B C 6 switch system output wires 08 4 SWITCH SYSTEM Position Color 1 Yellow 2 Orange 3 Brown 4 Grey 6 SWITCH SYSTEM Position Color 1 White 2 Green 3 Yellow 4 Orange 5 Brown 6 Grey STechSwitch.com sales@stechswitch.com Conifer Rd. # Conifer, CO
6 Here's how the switch numbers relates to fuses and relays. Relay 4 Relay 3 Fuse 1 Fuse 2 Fuse position switch system shown Fuse 4 Relay 2 Relay 1 Relay 5 Relay 4 Relay 3 Fuse 3 Fuse 4 Fuse 5 Fuse 1 09b 6 position switch system shown Fuse 2 Fuse 6 Relay 6 Relay 2 Relay 1 NOTE: All circuits are capable of 30A each. Double check the accessory that you are controlling and make sure it matches the fuse Amperage installed in the control box. Maximum Total Load 600 WATTS. EXAMPLE: A 50" light bar would require a 30A fuse while a few LED rock lights would usually require less than 10A 6 STechSwitch.com sales@stechswitch.com Conifer Rd. # Conifer, CO
7 You will now have to feed the main switch harness behind the battery tray and main fuse box. Go behind the ground wires mounted on the side of the fender You will need to remove the two bottom plugs on the fender liner to reach up behind it. (left) The harness will come down the firewall and then feed through the main firewall harness plug. (right) The firewall harness plug from an interior view. Make a slit just to the left of the harness so the switch harness plug can be fed through. Alternatively, a hole can be drilled in the firewall just big enough for the switch plug to fit Remove the glovebox to start routing the switch harness. To remove, lift slightly on the upper center tab so the glovebox moves freely. Then there s a rotating slide mount on the left. Gently slide the tab from the glovebox out STechSwitch.com sales@stechswitch.com Conifer Rd. # Conifer, CO
8 13 Route the switch harness behind the two large plugs that were behind the glovebox 14 Next, the switch harness will go behind the dash starting where the plug is shown here. Some dash must be removed first Gently insert a trim removal tool in the lower corner of the hvac dash piece. (left) Starting from the right side, gently pull back on the dash piece. It should just pop out. (right) 15 Unplug the harness plugs and set the dash piece aside. (left) Remove the 7mm screw holding the lower dash 16 piece in. (right) 8 STechSwitch.com sales@stechswitch.com Conifer Rd. # Conifer, CO
9 17 After the screw is removed, gently pull straight back on the dash piece until it pops free from its retainers. Unplug the harness plugs. The switches will mount in this dash piece Showing the switch pod wiring. (left) The pocket in the removed lower dash piece will be used to house the switches. A hole will need to be made for the plug to come out of. Make the hole on the side the plug is on here. (right) 18 Remove the little tray from the pocket in the dash piece. (left) 19 Insert the switch pod and feed the plug out the newly made hole. (right) Line up the mounting nuts on the switch pod with the two holes that are already in the pocket from factory. (left) Continue feeding the switch harness through the dash. It should come out where it s shown here. (right) 20 STechSwitch.com sales@stechswitch.com Conifer Rd. # Conifer, CO
10 secondary switch* *Optional secondary switch available on Be sure to note the direction of the fuse tap relative to the Power Distribution Box. Failure to install the FUSE TAP in the correct direction will result in NO POWER to the system. Use the supplied Fuse Tap to provide for an ignition on only 12V source. CONNECT Fuse Tap to accessory on only location. This will enable the system when the ignition is turned on. Do not install the Red Accessory wire directly to a 12 volt source like a live fuse or the vehicles 12V battery as this will drain your battery since the lower LED lights will be on all the time. Some customers have done this and installed a secondary switch (see inset photo) to the RED Accessory wire circuit to turn it On/Off manually without the ignition on. However be very careful not to leave it on too long, it will drain our battery. 21 The 20amp fuse in the fuse box shown here will be used for the power turn on wire. This is the power outlet fuse. (left) 20amp fuse shown with the provided micro fuse 22 tap. (right) 23 Trim the power turn on wire to fit and solder or tap the wire to the fuse tap. The wire should be able to sit alongside the divider near the power stud bank. No trimming or modifications necessary. 24 The accessory turn on wires are color matched to the switches in the switch pod. 10 STechSwitch.com sales@stechswitch.com Conifer Rd. # Conifer, CO
11 SWITCHES LEFT TO RIGHT: Switch Position 1, 2, 3, 4, NOTE: If switches are inoperable recheck ground, 12V source and red ignition source for power. Should you have troubleshooting questions check the S-TECH website stechswitch.com/installation/#updates or call us at CONgRATULATIONS! You have just completed the installation of your new S-tech Switch System. Any Questions or Comments please call or us at For information & videos as well as printable / downloadable instructions and templates, please visit STechSwitch.com sales@stechswitch.com Conifer Rd. # Conifer, CO
12 Other Vehicle Housing Solutions Available at: stechswitch.com/accessories Toyota Tacoma TRD Dodge RAM Toyota 4 Runner Subaru CrossTrek Toyota FJ Subaru Forester
JEEP JL INSTALL GUIDE
JEEP JL INSTALL GUIDE S-TECH Switch Systems DEVELOPED, DESIGNED, MANUFACTURED and Assembled in the Rocky Mountains of Colorado, known to many as JEEP COUNTRY. Trail riding at 10,000 feet at night requires
More informationJEEP TJ INSTALL GUIDE
JEEP TJ INSTALL GUIDE S-TECH Switch Systems DEVELOPED, DESIGNED, MANUFACTURED and Assembled in the Rocky Mountains of Colorado, known to many as JEEP COUNTRY. Trail riding at 10,000 feet at night requires
More informationChevy Colorado / GMC Canyon INSTALL GUIDE
Chevy Colorado / GMC Canyon INSTALL GUIDE S-TECH Switch Systems DEVELOPED, DESIGNED, MANUFACTURED and Assembled in the Rocky Mountains of Colorado, known to many as JEEP COUNTRY. Trail riding at 10,000
More informationABOUT S-TECH SWITCH SYSTEMS
ABOUT S-TECH SWITCH SYSTEMS S-TECH Switch Systems are proudly engineered, developed, designed, manufactured and assembled in the USA. S-TECH was born trail riding at 10,000 feet at night for those who
More informationABOUT S-TECH SWITCH SYSTEMS
ABOUT S-TECH SWITCH SYSTEMS S-TECH Switch Systems are proudly engineered, developed, designed, manufactured and assembled in the USA. S-TECH was born trail riding at 10,000 feet at night for those who
More informationJEEP SWITCH SYSTEMS. Switches available in: BLUE, RED, AMBER or GREEN. Black Matte Finish. Optional Brushed Aluminum Finish
JEEP SWITCH SYSTEMS S-TECH JL '18 - '19 S-TECH 6 Switch System Six (6) Dual LED Rocker Switches Eight (8) Nylon HD Cable Ties 50# Tensile 7" Black S-TECH Product Brochure MSRP: $279.99 Switches available
More informationABOUT S-TECH SWITCH SYSTEMS
ABOUT S-TECH SWITCH SYSTEMS S-TECH Switch Systems are proudly engineered, developed, designed, manufactured and assembled in the USA. S-TECH was born trail riding at 10,000 feet at night for those who
More informationFord Mustang V6 OEM-Style Fog Light Kit Parts List: Quantity: Tool List:
2015-2017 Ford Mustang V6 OEM-Style Fog Light Kit Parts List: Quantity: Tool List: LED Foglights/ Bezels 2 Flat head & Phillips screwdriver (if you ordered part#3600) Ratchet & Socket set OR Wiring harness
More informationDepress each tab as you pull the bezel off. The bezels are tight. L.H. shown.
2013-2014 Ford Mustang V6 & Boss 302 Lower Valance Fog Light Kit Parts List: Quantity: Tool List: Fog light & bulb with bracket 2 Flat head & Phillips screwdriver Black bezels 2 Ratchet & Socket set OR
More informationIT IS IMPORTANT THAT YOU OBTAIN THE CORRECT INFORMATION FOR YOUR VEHICLE, OR DAMAGE TO THE WIRING SYSTEM COULD OCCUR.
Instructions for Universal Harness PRINT THESE INSTUCTIONS Gentex Mirror Installation Instructions Provided by www.rearviewautomirrors.com These instructions have been prepared to provide you with details
More informationC WD 2 WHEEL LOW KIT FOR DODGE RAM 4WD VEHICLES
C18056-4WD 2 WHEEL LOW KIT FOR 1994-2002 DODGE RAM 4WD VEHICLES Pacbrake s 4WD 2 Wheel Low Kit allows the vehicle operator to engage the transfer case into 4WD low range without engaging the front wheel
More informationSP Switch Programmable Switch Panel Power System. Parts Included
SP8100 8-Switch Programmable Switch Panel Power System Parts Included 1 Switch Panel 1 100 amp Power Module 1 Power Module Harness 1 Power Module Mounting Plate 1 Battery Cable w/100a MIDI fuse (Littlefuse
More informationAssembly Instructions
Assembly Instructions Part Number Description Model Approx. Assembly Time 99994-0903 Windshield Wiper Kit Mule SX 1 Hour WARNING Improper installation of this accessory could result in an accident causing
More informationInstallation Instructions for Chevrolet Colorado, GMC Canyon, LT, Z71, With Factory Fog Lights
Installation Instructions for 2015-2018 Chevrolet Colorado, GMC Canyon, LT, Z71, With Factory Fog Lights This kit is designed to allow use of your factory fog light operation along with an addition auxiliary
More informationRemove black panel shown. Save 6 retaining pins for re-install later. Pry up on center part of pin first. Then pry out entire retaining pin.
2005-2009 Ford Mustang V6 Fog Light Wiring Kit Parts List: Quantity: Tools Required: Wiring harness 1 Flat head screwdriver Supplemental wire leads 2 Ratchet & Socket set OR Wire tap red 2 Adjustable Wrench
More informationFord Mustang GT-Style Fog Light Kit Parts List: Quantity: Tool List:
2013-2014 Ford Mustang GT-Style Fog Light Kit Parts List: Quantity: Tool List: Fog light (Left& Right) 2 Flat head & Phillips screwdriver Upper grille with surround 1 Ratchet & Socket set OR Lower grille
More informationREAD ME! IMPORTANT WARNING! ENG. Auxiliary 80l Fuel Tank Toyota Hilux DC 2005-Current
Auxiliary 80l Fuel Tank Toyota Hilux DC 2005-Current ENG FTTH011 READ ME! Thank you for purchasing a Front Runner Fual Tank. Before you start, take a moment to familiarize yourself with the Fitting Instructions
More informationInstallation Tips For Crimestopper RS7 + Passlock-sl2(4) + DLRM + SPDT
TIP SHEET T3628 Installation Tips For Crimestopper RS7 + Passlock-sl2(4) + DLRM + SPDT For Chevrolet: Astro 1998-2005, Avalanche 2002, Blazer 1998-2005, Cavalier 2000-2003, Express Van 1998-2005, S10 Pickup
More informationINSTALLATION INSTRUCTIONS C-VS-2000-DUR-1 20 VEHICLE SPECIFIC CONSOLE for 2018 Dodge Durango with Standard Shifter
INSTALLATION INSTRUCTIONS C-VS-2000-DUR-1 20 VEHICLE SPECIFIC CONSOLE for 2018 Dodge Durango with Standard Shifter TOOLS REQUIRED: Phillips Screw Driver T-20 Torx bit Standard Socket set 9/64 Allen wrench
More informationACD-PRO Install in 2008 EvoX
Turning in a counter clockwise direction, unscrew ift knob ACD-PRO Install in 2008 EvoX Slide back and remove the floor console panel assembly Pull up to remove the center console tray Disconnect the plug
More informationSmall knife. Remove black panel shown. Save 6 retaining pins for re-install later.
2005-2009 Ford Mustang V6 Fog Light Wiring Kit Parts List: Quantity: Tools Required: Wiring harness 1 Flat head screwdriver PB-3425 Parts Bag 1 Ratchet & Socket set OR Ford OEM Switch (if you 1 Adjustable
More informationPart Number: TTU-BGB14-DRL TTU-BGP14-DRL
11/15/16 TOYOTA TUNDRA 2014-17 Billet Grille w/led DRL Part Number: TTU-BGB14-DRL TTU-BGP14-DRL Kit Contents Item # Quantity Reqd. Description 1 2 LED DRL 2 1 Driver Box 3 1 Switch 4 1 User Card 5 2 Hardware
More informationTIP SHEET T0491. Installation Tips for your Excalibur RS Passlock-sl2(4) + DLRC + SPDT
TIP SHEET T0491 Installation Tips for your Excalibur RS-360 + Passlock-sl2(4) + DLRC + SPDT For Chevrolet: Astro 1998-2005, Avalanche 2002, Blazer 1998-2005, Cavalier 2000-2003, Express Van 1998-2005,
More informationGentex Homelink Installation Instructions
Gentex Homelink Installation Instructions Kit Contents: Item Qty Part Description 1 Number GENK-41 NVS Homelink Mirror GENK-42 NVS Homelink w/mood lights 1 of the GENK-45 NVS Homelink w/compass following
More informationRH INSTALL INSTRUCTIONS
Tips for Installing Rhinogear Products The recommended sequence for installing our Rhinogear line of products on your Rhino. This sequence will help with ease of installation and help save time by eliminating
More informationU L T I M A T E R A D A R / L A S E R D E F E N S E S Y S T E M
S m a r t e r Q u i e t e r M o r e A c c u r a t e U L T I M A T E R A D A R / L A S E R D E F E N S E S Y S T E M Installation Manual PASSPORT 9500ci Comes Complete Front Radar Receiver Miniature weatherproof
More informationTusk UTV Horn & Signal Kit Installation Instructions
Tusk UTV Horn & Signal Kit Installation Instructions The Tusk UTV signal kit is designed to be a simple way to provide front and rear turn signals, license plate mount with light, horn, and rearview mirrors
More informationSAFETY. Injury hazard
SAFETY Your safety and the safety of others is very important. In order to help you make informed decisions about safety, we have provided installation instructions and other information. These instructions
More informationInstallation Items: Cruise Module
Installation Items: Rostra 250-1223, Electronic Cruise Control System (ECCS) includes the cruise module, harness, cruise cable, cruise module mounting bracket, cruise cable mounting bracket and hardware
More informationInstallation Instructions
Installation Instructions Jeep JK 2-Door (2011 Present) Mounting Bracket and Air Line System Kit for ARB On-Board Twin Air Compressor (CKMTA12) Made in the USA Kit Contents: 1 Flat Bracket 1 Formed Bracket
More informationTOYOTA TACOMA LED DRL Black-Out
TOYOTA TACOMA 2013 - LED DRL Black-Out Part Number: 00016-35021 Accessory Code: LDBO10 Conflicts - Fog Lights Kit Contents Item # Quantity Reqd. Description 1 2 DRL Housing 2 1 Driver Box 3 1 Harness bag
More informationPRXB EXHAUST BRAKE MAXIMUM EXHAUST FLOW DESIGN
MAXIMUM EXHAUST FLOW DESIGN PRXB EXHAUST BRAKE C44072/C44073/C44074/C44075/C44076 APPLICATION: 994-2002 DODGE RAM TRUCKS W/5.9L CUMMINS DIESEL ENGINES WITH MANUAL & AUTOMATIC TRANSMISSIONS STOCK DODGE
More informationCOBB Fuel Pressure Regulator Kit
315100 COBB Fuel Pressure Regulator Kit 2008+ Subaru STI Congratulations on your purchase of the COBB Tuning Fuel Pressure Regulator Kit for your 2008+ Subaru STI. The following instructions will assist
More informationC FORD F250 / F L POWERSTROKE DIESEL WITH AUTOMATIC TRANSMISSIONS ONLY
EXHAUST BRAKES C40019 1999-2003 FORD F250 / F350 7.3L POWERSTROKE DIESEL WITH AUTOMATIC TRANSMISSIONS ONLY Getting Started Thank you and congratulations on your purchase of a Pacbrake exhaust retarder.
More informationROUSH Active IO Exhaust. Installation Instructions P/N: (R LITE) Fastback GT Convertible GT V8
Installation Instructions P/N: 422128 (R1318-5231LITE) Fastback GT Convertible GT V8 39555 Schoolcraft Rd, Plymouth MI, 48170 800.59.ROUSH ROUSH Active IO Exhaust Installation Instructions P/N: 422128
More informationTOYOTA TACOMA Part Number: TTA-BGB16-DRL TTA-BGP16-DRL
TOYOTA TACOMA 2016-17 Date: 10.29.2016 Billet Grille w/led DRL Part Number: TTA-BGB16-DRL TTA-BGP16-DRL Kit Contents Item # Quantity Reqd. Description 1 2 LED DRL 2 1 Driver Box 3 1 Switch 4 1 User Card
More informationJK V8 HEMI BUILDER KIT Overview
JK V8 HEMI BUILDER KIT Overview Installation Guide 5.7L & 6.1L HEMI 2007-2008 JK - SWB, LWB Page 1 of 1 Congratulations on purchasing your AEV HEMI JK Installation kit. These instructions have been written
More informationINSTALLATION AND USER MANUAL
INSTALLATION AND USER MANUAL SDKIT-730 & SDKIT-734 100% Bolt-On 150 PSI Train Horn System for 2011-2015 F-250 & F-350 Super Duty P/N SDKIT-730 P/N SDKIT-734 Thank you for purchasing a Kleinn Air Horns
More informationPN R CHEVY CAMARO w/reverse Two panel Sequential LED Taillight kit installation guide. Kit Contents:
Two panel Sequential LED Taillight kit installation guide Kit Contents: 2 LED panels 4 rubber grommets 1 power wire with t-tap 1 driver side LED harness, 24 1 passenger side LED harness, 48 2 LED extension
More informationRaxiom Factory GPS Rear Back-up Camera Kit (07-17 Wrangler)
Raxiom Factory GPS Rear Back-up Camera Kit (07-17 Wrangler) Installation Time: 2.5-3Hrs Tools Required: 7mm Socket & Driver 10mm Socket 10mm Open end wrench Knife / Razor blade Zip-ties Wire Cutters Needle
More informationJeep TJ 6 Switch Panel
921709560 1997-06 Jeep TJ 6 Switch Panel Thank you for choosing Rough Country for all your lighting needs. Please read instructions before beginning installation. Check the kit hardware against the kit
More informationDODGE RAM 2500
81234007 2014-2015 DODGE RAM 2500 Congratulations - your new LevelTow Helper Springs are quality products capable of improving the handling and comfort of your vehicle. As with all products, proper installation
More informationWater in Fuel Sensor Kit
03/08/2016 1050355-1050356 Water in Fuel Sensor Kit (I-00369) 1 Water in Fuel Sensor Kit Fast and Accurate Detection of Water in Diesel Fuel 1050355 Universal Kit For use with BD FlowMax water separator
More informationSALEEN SPEEDLAB BOOST AND WATER TEMPERATURE GAUGE POD KIT
= SALEEN SPEEDLAB BOOST AND WATER TEMPERATURE GAUGE POD KIT INSTALLATION MANUAL: 2005-09 Mustang 4.6L 3V P/N: 10-8002-C12000B KIT P/N: 10-2903-B11511* Saleen Performance, Inc. 1225 East Maple Rd. Troy,
More informationPart Number : DDM-07-RIS
RACE INTAKE SYSTEM, R56 MINI Cooper S - 2007+ Part Number : DDM-07-RIS This kit includes: Part Number Description Qty DDM-07-006 DDMWorks PFB, Pressurized Filter Box 1 DDM-07-017 DDMWorks RAS, Ram Air
More informationPRXB EXHAUST BRAKE HIGH PERFORMANCE
HIGH PERFORMANCE PRXB EXHAUST BRAKE C44059, C4406, C44063, C44065 APPLICATION 994-2002 DODGE RAM AUTOMATIC TRUCKS EQUIPPED WITH 47RE TRANSMISSIONS WITH 5.9L, 24 VALVE CUMMINS DIESEL ENGINES GETTING STARTED
More informationInstallation Tips for your Excalibur Remote Start (for Honda and Acura Vehicles) rev 11/28/2012
Installation Tips for your Excalibur Remote Start (for Honda and Acura Vehicles) rev 11/28/2012 Thank you for purchasing your remote start from MyPushcart.com - an industry leader in providing remote starts
More informationInstallation Tips for your Crimestopper/ProStart Remote Start system (for GM vehicles) v1.01 updated 2/27/2012
Installation Tips for your Crimestopper/ProStart Remote Start system (for GM vehicles) v1.01 updated 2/27/2012 Thank you for purchasing your remote start from MyPushcart.com - an industry leader in providing
More informationInstallation Tips for your Remote Start w/ Keyless Entry (Toyota Vehicles) v3.2 Updated 3/14/13
Installation Tips for your Remote Start w/ Keyless Entry (Toyota Vehicles) v3.2 Updated 3/14/13 Thank you for purchasing your remote start from MyPushcart.com an industry leader in providing remote starts
More informationTurn Signal / Horn Kit PN 7101 by All years Polaris RZR 1000 and RZR 900, 900-4, 900 trail, 900S and 900XC STOP - THIS KIT IS DESIGNED
All years Polaris RZR 1000 and 1000-4 2015 RZR 900, 900-4, 900 trail, 900S and 900XC STOP - THIS KIT IS DESIGNED SPECIFICALLY FOR ALL YEAR AND MODEL POLARIS RZR 1000 AND 1000-4. ALSO THE 2015 POLARIS RZR
More informationLethal Performance Dual FPDM Harness Kit Installation
Lethal Performance Dual FPDM Harness Kit Installation The Lethal Performance Dual FPDM Harness Kit is a plug-and-play modification. Depending on whether you are using the Lethal Performance wire upgrade
More informationJeep JK 6 Switch Panel
921709590 2007-17 Jeep JK 6 Switch Panel Thank you for choosing Rough Country for all your lighting needs. Please read instructions before beginning installation. Check the kit hardware against the kit
More informationInstallation Tips for your Crimestopper/ProStart Remote Start system (add-on for GM vehicles) v1.02 updated 1/16/2013
Installation Tips for your Crimestopper/ProStart Remote Start system (add-on for GM vehicles) v1.02 updated 1/16/2013 Thank you for purchasing your remote start from MyPushcart.com - an industry leader
More informationInstallation Tips for your Remote Start system (for RS4LX>GMBP for GM vehicles)
Installation Tips for your Remote Start system (for RS4LX>GMBP for GM vehicles) Thank you for purchasing your remote start from MyPushcart.com - an industry leader in providing remote starts to doit-yourself
More informationTrail Rocker Installation Instructions
Trail Rocker Installation Instructions Manual #90581 For Installing Painless Part Numbers: 57002 Painless Performance Products recommends you, the installer, read this installation manual from front to
More informationRetrofit Steering Column
Retrofit Steering Column INSTALLATION INSTRUCTIONS for 1970-75 Camaro FOR PART NUMBER S: 1620860010, 1620860020, 1620860051, 1626860010, 1626860020, 1626860051 S INCE 1986 www.ididitinc.com 610 S. Maumee
More informationSlamPak SLPK-CAN-SPYDER1 SKU#94491& I n s t a l l a t i o n G u i d e for the
SlamPak I n s t a l l a t i o n G u i d e for the SLPK-CAN-SPYDER1 SKU#94491& 94490 If you choose to perform the installation yourself, it is absolutely vital that the Stealthbox be properly mounted to
More informationINSTALLATION. DRIVING LIGHTS for FLHT/FLHX/FLHR 5005
DRIVING LIGHTS for FLHT/FLHX/FLHR 5005 PARTS INCLUDED 1 Right Driving Light Assembly 1 Left Driving Light Assembly 1 Right Driving Light Bracket 1 Left Driving Light Bracket 4 Driving Light Bracket Plugs
More informationpg 2 Disassembly, Wire and Amplifier Plate Installation pg 9 Glovebox Subwoofer Installation pg 13 Kick Panel Speakers Installation
RZ3-5KRC RZR XP1000 & 2015+ RZR900 with Ride Command SSV Works 5 Speaker Audio Kit pg 2 Disassembly, Wire and Amplifier Plate Installation pg 9 Glovebox Subwoofer Installation pg 13 Kick Panel Speakers
More informationINSTALLATION FORK MOUNTED DRIVING LIGHTS 5008
5008 PARTS INCLUDED 1 Right Fork Mount Assembly 1 Left Fork Mount Assembly 2 H3 Driving Light Assemblies 1 12-Pin Wiring Adapter 1 Hardware Kit for Fork Mount Driving Lights, Including: 6 5/16-18 Nylock
More informationUse subject to terms and conditions posted at
BMS Water/Methanol/Alcohol WMI Kit Install Guide Last updated 9/11/2017 Use subject to terms and conditions posted at http:// www.burgertuning.com/terms.html THIS PART IS LEGAL FOR USE ONLY IN COMPETITION
More informationIt is strongly recommended that this product be installed by a professional.
Lower bumper Ford raptor Lower Bumper 20" E-Series or SR-Series or 4" E-Series set mounting instructions For Part # s 40133 & 40134 Thank you for purchasing Rigid Industries products for your Ford. Installation
More informationPRODUCT: Install Instructions, MV-1 C/O Std, With Aux Fan RELEASE DATE: 2/28/14 REVISION DATE: 9/30/2014 PART NUMBER: Rev C
Parts List (1) 01 000 027 Switch, 4 Position Blower (1) 04 000 007 Hose, 1/2 ID Drain, 6 (1) 01 000 087 Harn, Resistor (1) 04 000 078 Tube, Convo 1/2 x 24 (2) 01 000 136 Relay, 40 Amp (1) 04 000 015 Hose,
More informationINSTALLATION INSTRUCTIONS
2007-Current Jeep Wrangler 360º System for Aftermarket display (Kit # AVMS-3700v2) Please read thoroughly before starting installation and check that kit contents are complete. Items Included in the Kit:
More informationWiper motor bolt and spacer. 3. Place relays as shown in picture so you can route the wires.
TSB Fan Relay Kit Please refer to a factory repair manual when working on your car. 1. Disconnect battery cables from the battery. 2. Remove bolt and spacer from wiper motor as shown in the picture. Wiper
More informationKIT # MC-2992, MC-2993 INDIAN SCOUT SERIES W/ ABS 2014-PRESENT
Congratulations on your purchase of an Arnott Motorcycle Air Suspension system. This system provides you with the ability to maintain your bike at a constant level regardless of load, resulting in enhanced
More informationPHASE 3 POWERSPORTS AUDIO KIT RZR POLARIS. pg 2 Disassembly, Wire and Amplifier Plate Installation. pg 9 Glovebox Subwoofer Installation
POLARIS RZR PHASE 3 POWERSPORTS AUDIO KIT pg 2 Disassembly, Wire and Amplifier Plate Installation pg 9 Glovebox Subwoofer Installation pg 13 Kick Panel Speakers Installation pg 25 MRB3 and Dash Kit Installation
More informationKIT # MC-2911, MC-2923 FOR ALL YEAR SUZUKI M-109R SERIES
Congratulations on your purchase of an Arnott Motorcycle Air Suspension system. This system provides you with the ability to maintain your bike at a constant level regardless of load, resulting in enhanced
More informationINSTALLATION INSTRUCTIONS
2007-Current Jeep Wrangler 360º System for Factory Display Radios (Kit # AVMS-3701) Please read thoroughly before starting installation and check that kit contents are complete. Items Included in the Kit:
More informationINSTALLATION INSTRUCTIONS
2007-Current Jeep Wrangler 360º System for Factory Display Radios (Kit # AVMS-3701v2) Please read thoroughly before starting installation and check that kit contents are complete. Items Included in the
More information80703 & Backside License Plate Mount for Jeep JK Wrangler (80707) & 10+ (80703)
80703 Backside Mount 80707 Backside Mount REQUIRED TOOLS 10mm SOCKET 13mm SOCKET 4mm HEX KEY WIRE CRIMPS WIRE STRIPPERS ELECTICAL TAPE SCREW DRIVER KIT CONTAINS BACKSIDE MOUNT LICENSE PLATE BRACKET WITH
More informationPart # C-10 Level 1 Air Suspension System
350 S. St. Charles St. Jasper, In. 47546 Part # 11330199 63-72 C-10 Level 1 Air Suspension System Front Components: 1 11331099 Front CoolRide Kit for Stock Lower Arms 1 11330509 RQ Series Front Shock Kit
More informationConflicts: Vehicles with a sunroof
Toyota 4Runner Non/MR 2010-10.2 Overhead Video Part Number: 00016-00110; Fit Kit -00110-15, Beige 00016-00120; Fit Kit -00120-15, Gray Accessory Code: ED6 Conflicts: Vehicles with a sunroof Kit Contents:
More information#GL18006-L2 Honda Gold Wing 1800 & F6B models - All Years Lower Cowl LED Driving Lights INSTALLATION INSTRUCTIONS
#GL18006-L2 Honda Gold Wing 1800 & F6B models - All Years Lower Cowl LED Driving Lights INSTALLATION INSTRUCTIONS 1. Lay out and familiarize yourself with the parts included in the set. Remove the left
More informationBX88175 Installation Instructions ToadStop II Vacuum Brake System
BX88175 Installation Instructions ToadStop II Vacuum Brake System Serial No. Customer supplied tools & supplies Utility knife, 12VDC tester, drill & bits: (1/8", 1/4", 5/8 ), ¼ socket drive bit, punch,
More informationTable of Contents Multiplexing Installation Multiplexing truck chart...2 Multiplexing installation - module installed under the power unit cover (53618-M)..5 Multiplexing installation- under hood (53618-02-M)
More informationINSTALLATION INSTRUCTIONS
28 INSTALLATION INSTRUCTIONS SECTION - AIR SPRING SECTION 2 - AIR ACCESSORY 2-5 ! IMPORTANT PLEASE DON T HURT YOURSELF, YOUR KIT OR YOUR VEHICLE. TAKE A MINUTE TO READ THIS IMPORTANT INFORMATION. This
More informationThank you for purchasing the Craven Speed FlexPod Complete Gauge Pod Kit For R56, R58, R59, R60 with Refresh Engines (2011+)
Thank you for purchasing the Craven Speed FlexPod Complete Gauge Pod Kit For R56, R58, R59, R60 with Refresh Engines (2011+) Before You Start Please read instructions completely before installing. These
More information8436, 8437, 8438, 8439, 8442, 27480, 27780, 28028, & ISOLATION MODULE ELECTRICAL SYSTEM
September 11, 2003 Lit. No. 27808 8436, 8437, 8438, 8439, 8442, 27480, 27780, 28028, & 28400 ISOLATION MODULE ELECTRICAL SYSTEM Installation Instructions Read this document before installing the snowplow.
More informationINSTALLATION INSTRUCTIONS
2581 INSTALLATION INSTRUCTIONS 08-15 IMPORTANT PLEASE DON T HURT YOURSELF, THE KIT, OR YOUR VEHICLE. TAKE A MINUTE TO READ THIS IMPORTANT INFORMATION. SAFE INSTALLATION Please take all safety precautions
More informationBXD Battery Disconnect
INSTALLATION MANUAL BXD Battery Disconnect Installation Manual BATTERY DISCONNECTS provides a simple and safe means of disconnecting the coach and chassis battery(s) of an RV. With just the touch of a
More informationPitch Stop Mount Support for WRX/STI
Pitch Stop Mount Support for 2015+ WRX/STI 2017-02-06 Thank you for purchasing this PERRIN product for your car! Installation of this product should only be performed by persons experienced with installation
More informationITEM QTY CHECK PART NUMBER DESCRIPTION
PART #90542A Boost Gauge Package, SLP, 2005-2013 Corvette PACKING LIST Before installation, use this check list to make sure all necessary parts have been included. ITEM QTY CHECK PART NUMBER DESCRIPTION
More information2015+ WRX COLD AIR INTAKE PSP-INT-325BK & PSP-INT-325RD
Vehicle Fitment Chart: 2015-18 SUBARU WRX H4-2.0L Turbo 2015+ WRX COLD AIR INTAKE PSP-INT-325BK & PSP-INT-325RD 2017-09-05 Thank you for purchasing this PERRIN product for your car! Installation of this
More informationINSTALLATION INSTRUCTIONS
Rear Vision System Liftgate Emblem Camera Mirror Display 2009-2012 Ford Flex (Kit part number 1008-9527) Kit Contents: Mirror Liftgate Emblem Mount with Camera Interior (shorter) Harness Chassis (longer)
More information2004 KIA RIO CRUISE CONTROL INSTALLATION INSTRUCTIONS PART NO AUTOMATIC TRANSMISSION VEHICLE CONTENTS
2004 KIA RIO AUTOMATIC TRANSMISSION VEHICLE CRUISE CONTROL INSTALLATION INSTRUCTIONS PART NO. 250-1766 CONTENTS PARTS IDENTIFICATION... 2 HELPFUL HINTS... 3 INSTALLATION... 4 WIRING DIAGRAM... 11 TROUBLESHOOTING
More informationInstructions for Lynx R Fairing - KTM EXC 500 Husqvarna 501
Instructions for Lynx R Fairing - KTM EXC 500 Husqvarna 501 Thank you for purchasing the Lynx R fairing. The kit includes the following parts : 1 x Fairing and 1x Screen 2x 16mm M6 button head screws 4x
More informationInstant Chat off the main page of Or simply call our tech team at
FRONT MOUNT INTERCOOLER 2015+ WRX 2017-07-07 Thank you for purchasing this PERRIN product for your car! Installation of this product should only be performed by persons experienced with installation of
More informationSAFETY THIS PRODUCT IS FOR OFFROAD USE ONLY. ALL LIABILITY FOR INSTALLATION AND USE RESTS WITH THE OWNER.
SAFETY Your safety and the safety of others is very important. In order to help you make informed decisions about safety, we have provided installation instructions and other information. These instructions
More informationInstallation Tips for RS1 + EVO-RIDE + SPDT. *(reglar key, automatic transmission vehicles ONLY)*
Installation Tips for RS1 + EVO-RIDE + SPDT TIP SHEET T1235 *(reglar key, automatic transmission vehicles ONLY)* Thank you for purchasing your remote start from MyPushcart.com - an industry leader in providing
More informationInstallation Tips Crimestopper/ProStart Remote Start system + PLJX + DLRM + SPDT (for GM vehicles) T0760 v1.1 updated 2/5/14
Installation Tips Crimestopper/ProStart Remote Start system + PLJX + DLRM + SPDT (for GM vehicles) T0760 v1.1 updated 2/5/14 Thank you for purchasing your remote start from MyPushcart.com - an industry
More informationTrail Rocker Installation
Trail Rocker Installation Instructions 4, 6, or 8 - Switch Customizable Trail Rocker Switch Panel w/ Flanged Mount For Installing Painless Part Number: 57103, 57106, & 57109 Manual #90636 Painless Performance
More informationGuardian Personal Mobility Lift Interlock GRD701-AR ( Dodge Sprinter) Installation Instructions
An ISO 9001:2000 Registered Company Guardian Personal Mobility Lift Interlock GRD701-AR (2007-2008 Dodge Sprinter) Installation Instructions GUARDIAN MODULE Remove drivers seat and step-well trim for access.
More informationTrail Rocker Installation Instructions
Trail Rocker Installation Instructions Manual #90580 For Installing Painless Part Numbers: 57000 and 57001 Painless Performance Products recommends you, the installer, read this installation manual from
More informationFour Panel Sequential LED Tail Light Kit Installation Guide
1969 CHEVY CAMARO Four Panel Sequential LED Tail Light Kit Installation Guide Kit Contents: 4 LED panels 4 rubber grommets 1 power wire with t-tap 2 driver side LED harnesses, 24 2 passenger side LED harnesses,
More informationKIA RIO CRUISE CONTROL INSTALLATION INSTRUCTIONS PART NO AUTOMATIC TRANSMISSION VEHICLE CONTENTS
2007-2008 KIA RIO AUTOMATIC TRANSMISSION VEHICLE CRUISE CONTROL INSTALLATION INSTRUCTIONS PART NO. 250-1799 CONTENTS PARTS IDENTIFICATION... 2 HELPFUL HINTS... 3 INSTALLATION... 4 WIRING DIAGRAM... 11
More informationToyota Hilux / fortuner BATTERY BRACKET
Toyota Hilux / fortuner BATTERY BRACKET BBTH001 INSTALL TIME: 15 Mins IMPORTANT WARNING! IT IS CRITICAL THAT ALL FRONT RUNNER PRODUCTS BE PROPERLY AND SECURELY ASSEMBLED AND ATTACHED TO YOUR VEHICLE. IMPROPER
More informationRH INSTALL INSTRUCTIONS 2008 MODEL
RH-800-2 INSTALL INSTRUCTIONS 2008 MODEL 1 Tips for Installing Rhinogear Products The recommended sequence for installing our Rhinogear line of products on your Rhino. This sequence will help with ease
More informationInstallation Tips for your Remote Start/Keyless Entry (for Honda/Acura Vehicles) [EVO-ALL] v1.02 updated 9/13/2013
Installation Tips for your Remote Start/Keyless Entry (for Honda/Acura Vehicles) [EVO-ALL] v1.02 updated 9/13/2013 Thank you for purchasing your remote start from MyPushcart.com - an industry leader in
More informationWOC & WOC Top & Back Installation Instructions
Shown with optional Sun Roof WOC-900500-2 & WOC-900501-2 Top & Back Installation Instructions Install Order! Heater Door System Wiper on to Windshield Windshield Rear Panel Top Panel Tools needed: 5/16
More information