FOR INSTALLATION, SAFE OPERATION AND MAINTENANCE
|
|
- Nathan Allison
- 5 years ago
- Views:
Transcription
1 MANUAL: Twister and BubbleCup Nozzles INSTRUCTIONS FOR INSTALLATION, SAFE OPERATION AND MAINTENANCE Read instruction manual before use. Operation of this nozzle without understanding the manual and receiving proper training can be dangerous and is a misuse of this equipment. Call with any questions. This instruction manual is intended to familiarize firefighters and maintenance personnel with the operation, servicing and safety procedures associated with the Twister and BubbleCup Handline fire fighting nozzles. This manual should be kept available to all operating and maintenance personnel. TWISTER 0/ 5 GPM FS 05BC BUBBLECUP DANGER PERSONAL RESPONSIBILITY CODE The member companies of FEMSA that provide emergency response equipment and services want responders to know and understand the following: 1. Firefi ghting and Emergency Response are inherently dangerous activities requiring proper training in their hazards and the use of extreme caution at all times.. It is your responsibility to read and understand any user s instructions, including purpose and limitations, provided with any piece of equipment you may be called upon to use. 3. It is your responsibility to know that you have been properly trained in Firefi ghting and /or Emergency Response and in the use, precautions, and care of any equipment you may be called upon to use. 4. It is your responsibility to be in proper physical condition and to maintain the personal skill level required to operate any equipment you may be called upon to use. 5. It is your responsibility to know that your equipment is in operable condition and has been maintained in accordance with the manufacturer s instructions.. Failure to follow these guidelines may result in death, burns or other severe injury. FEMSA Fire and Emergency Manufacturers and Service Association P.O. Box 147, Lynnfi eld, MA TASK FORCE TIPS, INC. MADE IN USA Innovation Way, Valparaiso, IN USA Fax
2 1.0 MEANING OF SIGNAL WORDS 1.1 SAFETY.0 GENERAL INFORMATION.1 VARIOUS MODELS.1.1 COMMON MODELS AND TERMS. COLOR CODED VALVE HANDLE COVERS.3 MECHANICAL SPECIFICATIONS 3.0 NOZZLE CONTROLS 3.1 FLOW CONTROLS TIP ONLY NOZZLES 3.1. BALL SHUTOFF 3. PATTERN & FLUSH CONTROL 3..1 PATTERN CONTROL 4.0 BUBBLECUP NOZZLES Table Of Contents 5.0 FLOW CHARACTERISTICS 5.1 REACH & TRAJECTORY TWISTER & BUBBLECUP FLOWS 5.1. METRIC TWISTER & BUBBLECUP FLOWS.0 USE WITH SALT WATER 7.0 FOAMJET MX WITH TWISTER NOZZLES 8.0 FIREGROUND USE OF TWISTER & BUBBLECUP NOZZLES.0 FIELD INSPECTION 10.0 INSPECTION CHECKLIST 11.0 ANSWERS TO YOUR QUESTIONS 1.0 DRAWINGS AND PARTS LIST 13.0 WARRANTY 1.0 MEANING OF SAFETY SIGNAL WORDS A safety related message is identifi ed by a safety alert symbol and a signal word to indicate the level of risk involved with a particular hazard. Per ANSI standard Z , the defi nitions of the four signal words are as follows: DANGER DANGER indicates a hazardous situation which, if not avoided, will result in death or serious injury. CAUTION NOTICE 1.1 SAFETY DANGER indicates a hazardous situation which, if not avoided, could result in death or serious injury. CAUTION indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury. NOTICE is used to address practices not related to personal injury. An inadequate supply of nozzle pressure and/or flow will cause an ineffective stream and can result in injury, death or loss of property. See flow charts in Section 5.0 or call for assistance. Failure to restrain nozzle reaction can cause firefighter injury from loss of footing and/or stream protection. Nozzle reaction will vary as supply conditions change: such as opening or closing other nozzles, hose line kinks, changes in pump settings, etc. Changes in spray pattern or flushing will also affect nozzle reaction. The nozzle operator must always be positioned to restrain the nozzle reaction in the event of those changes. Injury from whipping can occur. If nozzle gets out of control or away from operator, retreat from nozzle immediately. Do not attempt to regain control of nozzle while flowing water. Nozzle reaction will vary as supply conditions change: such as opening or closing other nozzles, hose line kinks, changes in pump settings, etc. Changes in spray pattern or flushing will also affect nozzle reaction. The nozzle operator must always be prepared in the event of those changes. Failure to restrain nozzle reaction can cause firefighter injury from loss of footing and/ or stream protection. If nozzle gets out of control or away from operator, retreat from nozzle immediately. Do not attempt to regain control of nozzle while flowing water. Injury from whipping can occur. Large amounts or pieces of debris may be unflushable and can reduce the flow of the nozzle resulting in an ineffective flow. In the event of a blockage, it may be necessary to retreat to a safe area, uncouple nozzle and remove debris.
3 CAUTION CAUTION CAUTION CAUTION Water is a conductor of electricity. Application of water solutions on high voltage equipment can cause injury or death by electrocution. The amount of current that may be carried back to the nozzle will depend on the following factors: 1 Voltage of the line or equipment Distance from the nozzle to the line or equipment Size of the stream Whether the stream is solid or broken Purity of the water 1 Electrostatic Hazards of Foam Blanketing Operations by Peter Howels. Industrial Fire Safety July/August 13 The Fire Fighter and Electrical Equipment, The University of Michigan Extension Service, Fourth Printing 183. Page 47. Fire streams are capable of injury and damage. Do not direct water stream to cause injury or damage to persons or property. Do not couple aluminum to brass. Dissimilar metals coupled together can cause galvanic corrosion that can result in inability to unscrew threads or complete loss of thread engagement. The nozzle may become damaged if allowed to freeze while containing water. Always drain after use to avoid damage and possible loss of use. Nozzle must be mated to a hose line with matched threads. Mismatched or damaged threads may cause nozzle to leak or uncouple from hose under pressure and could cause injury..0 GENERAL INFORMATION The Task Force Tips Twister and Bubblecup nozzles are hand-held nozzles with clean far reaching straight stream. They are adjustable from straight stream to a wide fog pattern. Their rugged construction is compatible with the use of fresh water as well as fi re fi ghting foam solutions. The nozzles are constructed of hard anodizes aluminum, stainless steel, rubber and engineering grade polymers. A summary of each nozzle s characteristics is shown in the tables below. This equipment is intended for use by trained personnel for firefighting. Their use for other purposes may involve hazards not addressed by this manual. Seek appropriate guidance and training to reduce risk of injury..1 VARIOUS MODELS SERIES MODEL STANDARD COUPLING SIZE GALLONAGE SETTINGS (GPM AT 100 PSI) C TWISTER 3/4 GHT 10, 4 D TWISTER or BUBBLECUP 1 NH 10, 4 D TWISTER or BUBBLECUP 1 NH 10, 40 F TWISTER or BUBBLECUP 1-1/ NH 0, 0 F TWISTER 1-1/ NH 0, 5 F BUBBLECUP 1-1/ NH 5 Single Gallonage Only The C series Twister is available in a tip-only nozzle confi guration. The D and F Series Twisters and Bubble Cups are available in tip-only, ball-valve, or ball-valve with pistol grip confi gurations. NH (National Hose Threads per NFPA #13) threads are standard on all nozzles. Other threads such as NPSH (National Pipe Straight Hose threads per ANSI/ASME #B1.0.7) can be specifi ed at time of order. 3
4 .1.1 COMMON MODELS AND TERMS FLOW CONTROL NAME LABEL COUPLING ON OFF STREAM SHAPER RUBBER GASKET TIP ONLY NOZZLE NOZZLE WITH VALVE PISTOL GRIP NOZZLE WITH VALVE and PISTOL GRIP FIGURE 1 COMMON MODELS AND TERMS. COLOR CODED VALVE HANDLE AND PISTOL GRIP The TFT Twister and BubbleCup with lever type valve handles are supplied with black valve handle covers and pistol grips. The handle covers and pistol grips are available from TFT in various colors for those departments wishing to color code the nozzle to the discharge controls. A colored handle cover set will be sent upon receipt of the warranty card by TFT. Your department s name can also be engraved on the covers (see warranty card for more information). Handle covers are replaceable by removing the four screws that hold the handle covers in place. Use a 3/3 allen wrench when replacing screws. Pistol grip is replaceable by following TFT instruction sheet LTT-108. For standardization NFPA 101 (A-4-.3) recommends the following color code scheme: Preconnect #1 or Bumper Jump Line Preconnect or discharge # Preconnect or discharge #3 Preconnect or discharge #4 Preconnect or discharge #5 Preconnect or discharge # Preconnect or discharge #7 Foam Lines Orange Red Yellow White Blue Black Green Red w/ White border (Red/White) Other Colors Available: Gray Pink Purple Tan.3 MECHANICAL SPECIFICATIONS Maximum nozzle inlet pressure with valve shutoff* Twister 300 psi BubbleCup 300 psi 0 bar 0 bar Operating temperature range of fl uid 33 to 10º F 1 to 50º C Storage temperature range -40 to 150º F -40 to 5º C Materials used Aluminum 000 series hard anodized MIL85 class 3 type, stainless steel 300 series, nylon -, nitrile rubber *Consult Factory for higher pressure applications 3.0 NOZZLE CONTROLS 3.1 FLOW CONTROL LEVER TYPE FLOW CONTROL On models that use a lever type valve handle, the nozzle is shut off when the handle is fully forward. The ball valve allow the nozzle operator to regulate the fl ow of the nozzle depending on the need or what can be safely and effectively handled. TFT recommends the use of a pistol grip for easier handling. For additional stress reduction, a hose rope or strap may also be used. This permits more effective use and ease of advancement, while minimizing strain and fatigue TIP ONLY NOZZLES Tip only nozzles have NO shut off valve contained within the nozzle and MUST be used with a separate ball valve attached to the nozzle. 4
5 FS FS 3.1. BALL SHUTOFF Models with a ball valve are shut off when the valve handle is fully forward. Pulling back on the handle opens the valve. Open valve slowly to avoid sudden changes in nozzle reaction. Note: In partially-open positions a ball valve will cause turbulence and adversely affect stream quality. Close valve slowly to prevent water hammer. 3. PATTERN AND FLUSH CONTROL 3..1 PATTERN CONTROL TFT s Twister and BubbleCup Nozzles have full pattern control from straight stream to wide fog. Turning the STREAM SHAPER clockwise (as seen from the operating position behind the nozzle) moves the SHAPER to the straight stream position. Turning the SHAPER counterclockwise will result in an increasingly wider pattern. Since the stream trim point varies with the fl ow, the stream should be trimmed after changing the fl ow to obtain the straightest and farthest reaching stream. To properly trim a stream, fi rst open the pattern to a narrow fog. Then close the stream to parallel to give maximum reach. NOTE: Turning the shaper further forward will cause stream crossover and reduce the effective reach of the nozzle. The nozzle reaction is greatest when the shaper is in the straight stream position. The nozzle operator must be prepared for a change in reaction as the pattern is changed. Low & High / Straight Stream Low & High / Medium Fog High /Wide Fog FIGURE CHANGING PATTERN AND FLOW SETTINGS Large amounts of debris can reduce the flow of the nozzle resulting in an ineffective flow. In the event of a blockage it may be necessary to retreat to a safe area, uncouple nozzle and remove debris. 4.0 BUBBLECUP NOZZLES The Bubble Cup nozzle is capable of producing aspirated foam as well as a conventional straight stream and wide protective fog pattern. The Bubble Cup functions just like the Twister nozzle (see section 3.0) when the gray sleeve is in the retracted position as in fi gure 3A. To use the aspirating feature of the Bubble Cup, the nozzle operator need only slide the gray sleeve portion of the nozzle forward. When the sleeve is in the fully-extended position, a white line on the shaper will be visible at the base of the gray sleeve as in fi gure 3B. Rotation of the shaper when the sleeve is extended will provide the nozzle operator control of reach and aspiration. If an immediate wide protective fog pattern is needed, the sleeve can be retracted instantly to its regular position. ASPIRATING SLEEVE SHAPER 05BC 0/ 5 GPM 05BC 0/ 5 GPM EXTENDED TO WHITE LINE A) Retracted Position B) Extended Position FIGURE 3 BUBBLE CUP OPERATING POSITIONS 5
6 5.0 FLOW CHARACTERISTICS At each gallonage setting the nozzle is set to a predetermined fi xed orifi ce. Relationship of fl ow and nozzle pressure at each setting is shown in fi gures 4A and 4B. PRESSURE (PSI) GPM FLOW (LPM) GPM FLOW (GPM) PRESSURE (BAR) PRESSURE (PSI) GPM FLOW (LPM) GPM FLOW (GPM) PRESSURE (BAR) 10, 4 GPM TWISTER OR BUBBLE CUP 0, 0 GPM TWISTER OR BUBBLE CUP FLOW (LPM) FLOW (LPM) PRESSURE (PSI) GPM 40 GPM PRESSURE (BAR) PRESSURE (PSI) GPM 5 GPM PRESSURE (BAR) , 40 GPM TWISTER OR BUBBLE CUP 0, 5 GPM TWISTER OR 5 GPM BUBBLE CUP Figure 4A Figure 4B The charts on the pages 7-8 of this document give specifi c examples of pump pressure and fl ow for various hoses and lengths. Losses may vary due to differences in hose construction resulting in fl ows different than shown. For situations or lengths of hose not listed on the chart, approximate fl ows can be calculated using conventional hydraulics. 5.1 REACH AND TRAJECTORY Specifi c data is published in technical documents LTT-140 and LTT-145 entitled Reach & Trajectory Data of Hand Held Nozzles. The following charts give specifi c examples of maximum fl ow rates for particular situations. Friction losses may vary due to differences in hose construction resulting in fl ows different than those shown. For situations or lengths of hose not listed on the chart, approximate fl ows can be calculated using conventional hydraulics.
7 5.1.1 TWISTER & BUBBLECUP FLOWS 1-3/4 HOSE 1-1/ HOSE 1 HOSE 3/4 HOSE FLOW 100 FT 00 FT 300 FT SETTING PUMP PRESSURE (PSI) FLOW 100 FT 00 FT 300 FT SETTING PUMP PRESSURE (PSI) FLOW 150 FT 00 FT 50 FT SETTING PUMP PRESSURE (PSI) FLOW 150 FT 00 FT 50 FT SETTING PUMP PRESSURE (PSI) 1) Number in each box is fl ow in gallons per minute. ) Actual fl ows may vary with brand and condition of hose. 3) Flows are approximate and do not account for losses in preconnect piping or changes in elevation. 7
8 5.1. METRIC TWISTER & BUBBLECUP FLOWS 45mm HOSE 38mm HOSE 5mm HOSE 1mm HOSE FLOW 30 Meters 0 Meters 0 Meters SETTING PUMP PRESSURE (BAR) FLOW 30 Meters 0 Meters 0 Meters SETTING PUMP PRESSURE (PSI) FLOW 45 Meters 0 Meters 75 Meters SETTING PUMP PRESSURE (BAR) FLOW 45 Meters 0 Meters 75 Meters SETTING PUMP PRESSURE (BAR) 1) Number in each box is fl ow in liters per minute. ) Actual fl ows may vary with brand and condition of hose. 3) Flows are approximate and do not account for losses in preconnect piping or changes in elevation. 4) 1BAR = 100 KPA 8
9 .0 USE WITH SALT WATER Use with salt water is permissible provided nozzle is thoroughly cleaned with fresh water after each use. The service life of the nozzle may be shortened due to the effects of corrosion and is not covered under warranty. 7.0 FOAMJET MX WITH TWISTER NOZZLE To increase the expansion ratio Task Force Tips Foamjet MX (model FJ-MX-D) may be used with the Twister nozzle. This multi-expansion foam tube attaches and detaches quickly from the nozzle. Note: As expansion ratio is increased, the reach of the stream will be decreased due to the greater amount of bubbles in the stream and their inability to penetrate the air. Generally, the reach with foam is approximately 10 % less than with water only. Actual results will vary based on brand of foam, hardness of water, temperature, etc. SERIAL # KKF-XXXXXX PATENT PENDING F50D Inse MULTI-EXPANSION FOAM ASPIRATING ATTACHMENT with TWISTER 1 INCH SERIES FIG 4 - FJ-MX-D Shown on Twister Nozzle For Class B fires, lack of foam or interruption in the foam stream can cause a break in the foam blanket and greatly increase the risk of injury or death. Assure that: Application rate is sufficient (see NFPA 11 or foam manufacturer s recommendations). Enough concentrate is on hand to complete task (see NFPA for minimum duration time requirements). Foam logistics have been carefully planned. Allow for such things as: Storage of foam in a location not exposed to the hazard it protects. Personnel, equipment and technique to deliver foam at a rapid enough rate. Removal of empty foam containers. Keeping clear path to deliver foam as hoses, other equipment and vehicles are deployed. Improper use of foam can result in injury or damage to the environment. Follow foam manufacturer s instructions and fire service training to avoid: Using wrong type of foam on a fire, i.e. Class A foam on a Class B fire. Plunging foam into pools of burning liquid fuels. Causing environmental damage. Directing stream at personnel. There is a wide variety of foam concentrates. Each user is responsible for verifying that any foam concentrate chosen to be used with this unit has been tested to assure that the foam obtained is suitable for the purpose intended. 8.0 FIREGROUND USE OF TWISTER AND BUBBLE CUP NOZZLES IT IS THE RESPONSIBILITY OF THE INDIVIDUAL FIRE DEPARTMENT OR AGENCY TO DETERMINE PHYSICAL CAPABILITIES AND SUITABILITY FOR AN INDIVIDUAL S USE OF THIS EQUIPMENT. Many factors contribute to the extinguishment of a fi re. Among the most important is delivering water at a fl ow rate suffi cient to absorb heat faster than is being generated. The fl ow rate depends largely on the pump discharge pressure and hose friction loss. The pump discharge pressure may be found by use of the chart on the last page. It can also be calculated using a hydraulic equation such as: PDP = NP + FL + DL + EL For additional information on calculating specifi c hose layouts, consult an appropriate fi re service training manual, A Guide to Automatic Nozzles, PDP = Pump discharge pressure in PSI or call TFT s Hydraulics Hotline at NP = Nozzle pressure in PSI FL = Hose friction loss in PSI DL = Device loss in PSI EL = Elevation loss in PSI
10 .0 FIELD INSPECTION Twister and Bubble Cup are designed and manufactured to be damage resistant and require minimal maintenance. However, as the primary fi refi ghting tool upon which your life depends, it should be treated accordingly. Before each use nozzle must be inspected for proper operation and function according to inspection checklist in section 10.0 of this document. Any nozzle that fails inspection is dangerous to use and must be repaired before using. Performance tests shall be conducted on the Twister and Bubble Cup nozzle after a repair, or anytime a problem is reported to verify operation in accordance with Task Force Tips test procedures. Consult factory for the procedure that corresponds to the model and serial number of the nozzle. Any equipment which fails the related test criteria should be removed from service immediately. Troubleshooting guides are available with each test procedure or equipment can be returned to the factory for service and testing. Factory service is available with repair time seldom exceeding one day in our facility. Factory-serviced nozzles are repaired by experienced technicians to original specifi cations, fully wet tested, and promptly returned. Repair charges for non-warranty items are minimal. Any returns should include a note as to the nature of the problem and whom to reach in case of questions. Repair parts and service procedures are available for those wishing to perform their own repairs. Task Force Tips assumes no liability for damage to equipment or injury to personnel that is a result of user service. SPECIAL CONFIGURATIONS; If nozzles are made according to the special marking or performance requirements of the fi re department then the operating characteristics may differ from the published data in this manual. Repair parts specifi c to each serial number may differ from those shown in the service procedure. The required parts for each serial number are available on-line by entering the with numbers corresponding to the serial number engraved on the product. Consult TFT for laser engraved handle covers, special labeling, logos, and special laser engraving on the nozzle. Any alterations to the nozzle and its markings could diminish safety and constitutes a misuse of this product. CAUTION All Task Force Tip nozzles are factory lubricated with high quality silicone grease. This lubricant has excellent washout resistance and long term performance. If your department has unusually hard or sandy water, the moving parts may be affected. Foam agents and water additives contain soaps and chemicals that may break down the factory lubrication. The moving parts of the nozzle should be checked on a regular basis for smooth and free operation, and signs of damage. IF THE NOZZLE IS OPERATING CORRECTLY, THEN NO ADDITIONAL LUBRICATION IS NEEDED. Any nozzle that is not operating correctly should be immediately removed from service and the problem corrected INSPECTION CHECKLIST Nozzle must be inspected for proper operation and function according to this checklist before each use. Check that: 1) There is no obvious damage such as missing, broken or loose parts, damaged labels, etc. ) Coupling is tight and leak free 3) Valve handle moves freely though full range and shuts off fl ow 4) Nozzle fl ow is adequate as indicated by pump pressure and nozzle reaction 5) Shaper turns freely and adjusts pattern through full range and shuts off fl ow ) On Bubble Cups, aspirating sleeve slides freely and is secure at both ends If a nozzle needs service, refer to the following documents: Service Procedure: 1.0 Twister and 1.0 BubbleCup LKD-010 Service Procedure: 1.5 Twister and 1.5 BubbleCup LKF-010 Any twister or bubble cup nozzle failing any part of the inspection checklist is unsafe and must have the problem corrected before use. Operating a nozzle that fails any of the above inspections is a misuse of this equipment ANSWERS TO YOUR QUESTIONS We appreciate the opportunity of serving you and making your job easier. If you have any problems or questions, our toll-free Hydraulics Hotline, , is normally available to you 4 hours a day, 7 days a week. 10
11 1.0 DRAWINGS AND PARTS LIST D Series Twister and BubbleCup Pages 1-13 F Series Twister and BubbleCup Pages
12 D Series Twister and BubbleCup /4 GPM 7 10/40 GPM 8 10/4 GPM 15 10/40 GPM
13 ITEM DESCRIPTION QTY PART # 1 1/4-0 X 3/4 FLATHEAD 1 VT5E0FH750 BAFFLE 1 D30 3 SEAT 1 D50 4 D TWISTER BUMPER 1 D75 5 HEAD 10/4 1 D5 * NAME LABEL 1 DL75 DL70 7 HEAD 10/40 1 D45 8 FOAM HEAD 10/4 1 D3 DETENT SCREW D0 10 SPRING HELICAL COMPRESSION VM /1" TORLON BALL V10-TORLON 1* NAME LABEL 1 DL74 DL73 13 CUP W/TEETH 1 D85 14 O-RING-1 1 VO-1 15 FOAM HEAD 10/40 1 D43 1 O-RING VO Z STRIP 1 D TRUNNION D O-RING-010 VO DQ HANDLE SUBASSEMBLY 1 DQ80 75 SHUTOFF HANDLE 1 D0750 BLACK HANDLE COVER HM5-BLK 8-3 X 3/8 BUTTON HEAD SCREW 4 VT08-3BH STOP PIN D07550 SPIROL PIN V TWISTER VALVE BODY 1 D WASHER 1 VM401 5 GRIP SPACER D075 1 HM3-D PISTOL GRIP - BLACK 1 HM-BLK 7 3/8-1 X 1 SOCKET HEAD SCREW 1 VT37-1SH /8-1 X 5/1 SET SCREW 1 VT37-1SS31 PORT PLUG 1 B /1" SS BALL V10 31 BELLEVILLE WASHER 1 D FRONT SEAT 1 D BALL 1 D ** COUPLING 1.0" 1 D O-RING-10 1 VO REAR SEAT 1 D GASKET - 1.0" 1 V ** BASE 1.0" 1 D10 3 BUBBLE CUP STRIPE LABEL 1 DL85 * - CONSULT FACTORY FOR SPECIFIC PART NUMBERS CORRESPONDING TO THE FLOW SETTINGS ON NOZZLE ** - STATE DESIRED THREAD WHEN ORDERING 13
14 F Series Twister and BubbleCup /0 GPM 7 0/5 GPM 0/0 GPM 15 5 GPM
15 ITEM DESCRIPTION QTY PART # 1 5/1-18 X 3/4 FLAT HEAD 1 VT31E18FH750 BAFFLE 1 F30 3 SEAT 1 F50 4 DQ BUMPER 1 DQ75 5 HEAD 0/0 1 F5 LABEL 1 FL70 FL75 7 HEAD 0/5 1 F5 8 FOAM HEAD 0/0 1 F3 QUAD RING-5 1 VOQ DETENT SCREW D0 11 SPRING HELICAL COMPRESSION VM /1" TORLON BALL V10-TORLON 13 CUP W/TEETH 1 F85 14 LABEL 1 FL80 FL8 15 FOAM HEAD 5 1 F3 1 O-RING-15 1 VO Z-STRIP 1 F TRUNNION F O-RING-01 VO-01 1 FQ HANDLE SUBASSEMBLY 1 FQ80 SHUT OFF HANDLE 1 F1000 BLACK HANDLE COVER HM5-BLK 8-3 X 3/8 BUTTON HEAD SCREW 4 VT08-3BH STOP PIN F10050 SPIROL PIN V TWISTER VALVE BODY 1 F FLAT WASHER 1 VM401 5 GRIP SPACER F100 1 HM3-F PISTOL GRIP - BLACK 1 HM-BLK 7 3/8-1 X 1 SOCKET HEAD SCREW 1 VT37-1SH /8-1 X 5/1 SET SCREW 1 VT37-1SS31 PORT PLUG 1 B /1" SS BALL 34 V10 31 BELLEVILLE WASHER 1 F FRONT SEAT 1 F BALL 1 F ** COUPLING 1.5" 1 F O-RING-1 1 VO REAR SEAT 1 F GASKET - 1.5" 1 V ** BASE 1.5" 1 F10 3 BUBBLE CUP STRIPE LABEL 1 FL85 * - CONSULT FACTORY FOR SPECIFIC PART NUMBERS CORRESPONDING TO THE FLOW SETTINGS ON NOZZLE ** - STATE DESIRED THREAD WHEN ORDERING
16 13.0 WARRANTY Task Force Tips, Inc., 3701 Innovation Way, Valparaiso, Indiana USA ( TFT ) warrants to the original purchaser of its Twister and BubbleCup series nozzles ( equipment ), and to anyone to whom it is transferred, that the equipment shall be free from defects in material and workmanship during the fi ve (5) year period from the date of purchase. TFT s obligation under this warranty is specifi cally limited to replacing or repairing the equipment (or its parts) which are shown by TFT s examination to be in a defective condition attributable to TFT. To qualify for this limited warranty, the claimant must return the equipment to TFT, at 3701 Innovation Way, Valparaiso, Indiana USA, within a reasonable time after discovery of the defect. TFT will examine the equipment. If TFT determines that there is a defect attributable to it, TFT will correct the problem within a reasonable time. If the equipment is covered by this limited warranty, TFT will assume the expenses of repair. If any defect attributable to TFT under this limited warranty cannot be reasonably cured by repair or replacement, TFT may elect to refund the purchase price of the equipment, less reasonable depreciation, in complete discharge of its obligations under this limited warranty. If TFT makes this election, claimant shall return the equipment to TFT free and clear of any liens and encumbrances. This is a limited warranty. The original purchaser of the equipment, any person to whom it is transferred, and any person who is an intended or unintended benefi ciary of the equipment, shall not be entitled to recover from TFT any consequential or incidental damages for injury to person and/or property resulting from any defective equipment manufactured or assembled by TFT. It is agreed and understood that the price stated for the equipment is in part consideration for limiting TFT s liability. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above may not apply to you. TFT shall have no obligation under this limited warranty if the equipment is, or has been, misused or neglected (including failure to provide reasonable maintenance) or if there have been accidents to the equipment or if it has been repaired or altered by someone else. THIS IS A LIMITED EXPRESS WARRANTY ONLY. TFT EXPRESSLY DISCLAIMS WITH RESPECT TO THE EQUIPMENT ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND ALL IMPLIED WARRANTIES OF FITNESS FOR A PARTICULAR PURPOSE. THERE IS NO WARRANTY OF ANY NATURE MADE BY TFT BEYOND THAT STATED IN THIS DOCUMENT. This limited warranty gives you specifi c legal rights, and you may also have other rights which vary from state to state. TASK FORCE TIPS, INC. MADE IN USA Innovation Way, Valparaiso, IN USA Fax
MANUAL: Twister and BubbleCup Nozzles
MANUAL: Twister and BubbleCup Nozzles INSTRUCTIONS FOR SAFE OPERATION AND MAINTENANCE Read instruction manual before use. Operation of this device without understanding the manual and receiving proper
More informationDANGER VALVE INTEGRAL TIP (VIT) NOZZLE MANUAL WARNING WARNING WARNING. TASK FORCE TIPS, INC. MADE IN USA
VALVE INTEGRAL TIP (VIT) NOZZLE MANUAL INSTRUCTIONS FOR INSTALLATION, SAFE OPERATION AND MAINTENANCE Read instruction manual before use. Operation of this nozzle without understanding the manual and receiving
More informationULTIMATIC, MID-MATIC & HANDLINE
TFT HAND HELD AUTOMATIC PRESSURE CONTROL NOZZLES ULTIMATIC, MID-MATIC & HANDLINE INSTRUCTIONS FOR INSTALLATION, SAFE OPERATION AND MAINTENANCE Read instruction manual before use. Operation of this nozzle
More informationTFT HAND HELD AUTOMATIC PRESSURE CONTROL NOZZLES
ULTIMATIC, INSTRUCTIONS FOR SAFE OPERATION AND MAINTENANCE TFT HAND HELD AUTOMATIC PRESSURE CONTROL NOZZLES MID-MATIC & HANDLINE Read instruction manual before use. Operation of this nozzle without understanding
More informationINSTRUCTIONS FOR INSTALLATION, SAFE OPERATION AND MAINTENANCE
MANUAL: Twister and BubbleCup Nozzles INSTRUCTIONS FOR INSTALLATION, SAFE OPERATION AND MAINTENANCE WARNING Understand manual before use. Operation of this device without understanding the manual and receiving
More informationDANGER MANUAL: 2 1/2 FLIP TIP2 TM NOZZLE WARNING NOTICE. TASK FORCE TIPS, INC. MADE IN USA
MANUAL: 2 /2 FLIP TIP2 TM NOZZLE PATENTS PENDING INSTRUCTIONS FOR INSTALLATION, SAFE OPERATION AND MAINTENANCE WARNING NOTICE Understand manual before use. Operation of this device without understanding
More informationMANUAL: FLIP TIP TM NOZZLE INSTRUCTIONS FOR INSTALLATION, SAFE OPERATION AND MAINTENANCE
MANUAL: FLIP TIP TM NOZZLE PATENTS PENDING INSTRUCTIONS FOR INSTALLATION, SAFE OPERATION AND MAINTENANCE Understand manual before use. Operation of this device without understanding the manual and receiving
More informationMANUAL: ThunderFog, QuadraFog and QuadraCup
MANUAL: ThunderFog, QuadraFog and QuadraCup INSTRUCTIONS FOR INSTALLATION, SAFE OPERATION AND MAINTENANCE Read instruction manual before use. Operation of this nozzle without understanding the manual and
More informationMANUAL: Foam Aspirators
MANUAL: Foam Aspirators INSTRUCTIONS FOR SAFE OPERATION AND MAINTENANCE WARNING Understand manual before use. Operation of this device without understanding the manual and receiving proper training is
More informationMANUAL: Metro 1 & 2 Fixed Gallonage Nozzles
MANUAL: Metro 1 & Fixed Gallonage Nozzles INSTRUCTIONS FOR SAFE OPERATION AND MAINTENANCE Understand manual before use. Operation of this device without understanding the manual and WARNING receiving proper
More informationINSTRUCTIONS FOR SAFE OPERATION AND MAINTENANCE
MANUAL: G-Force Nozzle Fixed, Selectable, and Automatic by: INSTRUCTIS FOR SAFE OPERATI AND MAINTENANCE NOTICE NOTICE Read Instruction Manual before use. Operation of this nozzle without understanding
More informationMANUAL: Foam Nozzles and Foam Attachments for TFT Nozzles
MANUAL: Foam Nozzles and Foam Attachments for TFT Nozzles INSTRUCTIONS FOR SAFE OPERATION AND MAINTENANCE WARNING Understand manual before use. Operation of this device without understanding the manual
More informationMANUAL: ThunderFog, QuadraFog and QuadraCup
MANUAL: ThunderFog, QuadraFog and QuadraCup INSTRUCTIONS FOR INSTALLATION, SAFE OPERATION AND MAINTENANCE Understand manual before use. Operation of this device without understanding the manual and WARNING
More informationMANUAL: Metro 1&2 Fixed Gallonage Nozzle
Metro 1 Metro 1 Metro 2 Metro 1 MANUAL: Metro 1&2 Fixed Gallonage Nozzle INSTRUCTIONS FOR SAFE OPERATION AND MAINTENANCE Read instruction manual before use. Operation of this nozzle without understanding
More informationMANUAL: TRANSFORMER INSTRUCTIONS FOR SAFE OPERATION AND MAINTENANCE
MANUAL: TRANSFORMER Nozzle system INSTRUCTIONS FOR SAFE OPERATION AND MAINTENANCE Understand manual before use. Operation of this device without understanding the manual and receiving proper training is
More informationMANUAL: Foam Attachments for TFT Nozzles
& MANUAL: Foam Attachments for TFT Nozzles INSTRUCTIONS FOR SAFE OPERATION AND MAINTENANCE WARNING Read Instruction Manual before use. Operation of this nozzle without understanding the manual and receiving
More informationULTIMATIC, MID-MATIC & HANDLINE
MANUAL: HAND HELD AUTOMATIC PRESSURE CONTROL NOZZLES ULTIMATIC, MID-MATIC & HANDLINE INSTRUCTIONS FOR INSTALLATION, SAFE OPERATION AND MAINTENANCE Understand manual before use. Operation of this device
More informationVORTEX TM INSTRUCTIONS FOR INSTALLATION, SAFE OPERATION AND MAINTENANCE
VORTEX TM NOZZLE MANUAL INSTRUCTIONS FOR INSTALLATION, SAFE OPERATION AND MAINTENANCE Understand manual before use. Operation of this device without understanding the manual and receiving proper training
More informationMANUAL: Foam Attachments for TFT Nozzles
MULTI-EXPANSION FOAM ASPIRATING ATTACHMENT & Insert bumper into attachment with latch unlocked. Push latch forward to lock in place. +1 219.462.6161 800.348.2686 www.tft.com MADE IN U.S.A. FJ-MX-HM 2800
More informationICE-CONTROL EQUIPMENT For Ground Anti-icing & Deicing Fluid Application
ICE-CONTROL EQUIPMENT For Ground Anti-icing & Deicing Fluid Application PRODUCT SPECIFICATIONS April 1, 2016 LIB-201 Rev09 800-348-2686 deicing.tft.com Effective immediately, the following Task Force Tips
More informationMANUAL: MASTER FOAM FIXED GPM SELF-EDUCTING FOAM NOZZLE
MANUAL: MASTER FOAM FIXED GPM SELF-EDUCTING FOAM NOZZLE INSTRUCTIONS FOR SAFE OPERATION AND MAINTENANCE WARNING Read instruction manual before use. Operation of this device without understanding the manual
More informationMANUAL: G-Force Nozzle Fixed, Selectable, and Automatic
MANUAL: G-Force Nozzle Fixed, Selectable, and Automatic by: INSTRUCTIONS FOR SAFE OPERATION AND MAINTENANCE Understand manual before use. Operation of this device without understanding the manual and receiving
More informationMANUAL: G-Force Nozzle Fixed, Selectable, and Automatic
MANUAL: G-Force Nozzle Fixed, Selectable, and Automatic by: INSTRUCTIONS FOR SAFE OPERATION AND MAINTENANCE Understand manual before use. Operation of this device without understanding the manual and WARNING
More informationMANUAL: Metro 0, 1 & 2 Fixed Gallonage Nozzles
MANUAL: Metro 0, 1 & 2 Fixed Gallonage Nozzles INSTRUCTIONS FOR SAFE OPERATION AND MAINTENANCE Understand manual before use. Operation of this device without understanding the manual and receiving proper
More informationMANUAL: Metro 0, 1 & 2 Fixed Gallonage Nozzles
MANUAL: Metro 0, 1 & 2 Fixed Gallonage Nozzles INSTRUCTIONS FOR SAFE OPERATION AND MAINTENANCE Understand manual before use. Operation of this device without understanding the manual and receiving proper
More informationMANUAL: Metro 0, 1 & 2 Fixed Gallonage Nozzles
MANUAL: Metro 0, 1 & 2 Fixed Gallonage Nozzles INSTRUCTIONS FOR SAFE OPERATION AND MAINTENANCE Understand manual before use. Operation of this device without understanding the manual and receiving proper
More informationMANUAL: MASTER FOAM FIXED GPM SELF-EDUCTING FOAM NOZZLE
MANUAL: MASTER FOAM FIXED GPM SELF-EDUCTING FOAM NOZZLE INSTRUCTIONS FOR SAFE OPERATION AND MAINTENANCE Understand manual before use. Operation of this device without understanding the manual and receiving
More informationMANUAL: EXTEND-A-GUN MODEL XG12
MANUAL: EXTEND-A-GUN MODEL XG12 Telescoping Waterway for Deck Mounted Monitors INSTRUCTIONS FOR INSTALLATION, SAFE OPERATION AND MAINTENANCE DANGER To make the Extend-A-Gun as versatile as possible three
More informationHANDLINE & Maintenance and Service Procedure For Nozzles with: Serial # TFT-H and over or Manufactured after 12/01/2003
HANDLINE & Maintenance and Service Procedure For Nozzles with: Serial # TFT-H465101 and over or Manufactured after 12/01/2003 INTRODUCTION TASK FORCE TIPS AUTOMATIC: The nozzle you have purchased is your
More informationMANUAL: EF1 RC MONITOR
MANUAL: EF1 RC MONITOR INSTRUCTIONS FOR INSTALLATION, SAFE OPERATION AND MAINTENANCE Understand manual and documents in additional literature before use. Operation of this device DANGER without understanding
More informationSTYLE 624, 638 QUICK-ATTACK FOAM TUBE INSTALLATION, OPERATING, AND MAINTENANCE INSTRUCTIONS
STYLE 624, 638 QUICK-ATTACK FOAM TUBE INSTALLATION, OPERATING, AND MAINTENANCE INSTRUCTIONS The following is intended to provide the basic instructions for installation, operation, and maintenance. Read
More informationSTYLE 5148 MERCURYMASTER OSCILLATING NOZZLE INSTALLATION, OPERATING, AND MAINTENANCE INSTRUCTIONS
STYLE 5148 MERCURYMASTER OSCILLATING NOZZLE INSTALLATION, OPERATING, AND MAINTENANCE INSTRUCTIONS The following is intended to provide the basic instructions for installation, operation, and maintenance.
More informationSTYLE 5148 MERCURYMASTER OSCILLATING NOZZLE INSTALLATION, OPERATING, AND MAINTENANCE INSTRUCTIONS
STYLE 5148 MERCURYMASTER OSCILLATING NOZZLE INSTALLATION, OPERATING, AND MAINTENANCE INSTRUCTIONS The following is intended to provide the basic instructions for installation, operation, and maintenance.
More informationMANUAL: MONSOON & MONSOON RC MONITOR
MANUAL: MONSOON & MONSOON RC MONITOR See Remote Control (RC) Monitor Electrical Controls Supplemental Instructions For Use With Monsoon RC Models INSTRUCTIONS FOR INSTALLATION, SAFE OPERATION AND MAINTENANCE
More informationMANUAL: MONSOON & MONSOON RC MONITOR
MANUAL: MONSOON & MONSOON RC MONITOR See Remote Control (RC) Monitor Electrical Controls Supplemental Instructions For Use With Monsoon RC Models INSTRUCTIONS FOR INSTALLATION, SAFE OPERATION AND MAINTENANCE
More informationHEMISPHERE Transportable Monitor Manual
HEMISPHERE Transportable Monitor Manual INSTRUCTIONS FOR PROPER OPERATION AND MAINTENANCE DANGER WARNING NOTICE Understand manual before use. Operation of this device without understanding the manual and
More informationMANUAL: PRO/pak Portable Multi-Purpose Foam System
TASK FORCE TIPS FIRE FIGHTING EQUIPMENT MANUAL: PRO/pak Portable Multi-Purpose Foam System INSTRUCTIONS FOR SAFE OPERATION AND MAINTENANCE DANGER Lack of foam can place operator at risk of injury or death.
More informationHANDLINE NOZZLE TASK FORCE TIPS. Maintenance and Service Procedure For models manufactured after 1983 INTRODUCTION GENERAL INFORMATION
INTRODUCTION TASK FORCE TIPS TASK FORCE TIPS AUTOMATIC: The nozzle you have purchased is your primary tool in the battle against fire. It has been manufactured with great care to give you the finest performance
More information( Versions Available)
STYLE 494 ELECTRIC LADDER PIPE INSTALLATION, OPERATING AND MAINTENANCE INSTRUCTIONS ( Versions Available) The following is intended to provide the basic instructions for installation, operating and maintenance
More informationColor-Coded Polymer Pistol Grip, Valve Handle Covers offer rugged durability in harsh fi refi ghting conditions
Domestic Catalog G-Force Nozzles: The Inside Story Based on a highly customizable global nozzle platform design, the unique G-Force series of fi xed, selectable, and automatic nozzles combine over 40 years
More informationSTYLE 3463 FireFox. With Position Feedback Potentiometer
STYLE 3463 FireFox INSTALLATION, OPERATING and MAINTENANCE INSTRUCTIONS With Position Feedback Potentiometer The following is intended to provide the basic instructions for installation, operating and
More informationSTYLE 3462 FORESTRY BUMPER MONITOR INSTALLATION, OPERATING and MAINTENANCE INSTRUCTIONS
STYLE 3462 FORESTRY BUMPER MONITOR INSTALLATION, OPERATING and MAINTENANCE INSTRUCTIONS The following is intended to provide the basic instructions for installation, operating and maintenance of the 3462
More informationMANUAL: Fixed, Selectable, and Automatic Nozzles North American Models
by: MANUAL: Fixed, Selectable, and Automatic Nozzles North American Models INSTRUCTIONS FOR SAFE OPERATION AND MAINTENANCE Understand manual before use. Operation of this device without understanding the
More informationINSTRUCTIONS FOR INSTALLATION, SAFE OPERATION AND MAINTENANCE
MANUAL: TORNADO, TORNADO OSC & TORNADO RC MONITOR INSTRUCTIONS FOR INSTALLATION, SAFE OPERATION AND MAINTENANCE Understand manual before use. Operation of this device without understanding the manual DANGER
More information: 1250 gpm in the deck mode : 800 gpm while operating in the ground base - Dual Inlet : 1000 gpm while operating in the ground base - Single Inlet
APOLLO HI-RISER MONITOR STYLE 3433/3431 INSTALLATION, OPERATING, AND MAINTENANCE INSTRUCTIONS The following is intended to provide the basic instructions for installation, operation and maintenance of
More informationINSTRUCTIONS FOR INSTALLATION, SAFE OPERATION AND MAINTENANCE. Dual Handwheel 3.5 Discharge. Dual Handwheel 2.5 Discharge
MANUAL: MONSOON & MONSOON RC MONITOR See LIY-5 Remote Control (RC) Monitor Electrical Controls Supplemental Instructions For Use With Monsoon RC Models INSTRUCTIONS FOR INSTALLATION, SAFE OPERATION AND
More informationSTYLE 3491 Severe Duty Electric Mining Water Cannon INSTALLATION, AND OPERATING INSTRUCTIONS
STYLE 349 Severe Duty Electric Mining Water Cannon INSTALLATION, AND OPERATING INSTRUCTIONS Australian Only The following is intended to provide the basic instructions for installation, operating and maintenance
More informationEssentials of Fire Fighting
Essentials of Fire Fighting 6 th Edition Certified Volunteer Firefighter Chapter 16 Fire Streams Learning Objectives Explain the way vaporization and steam relate to the extinguishing properties of water.
More informationThe following is intended to provide the basic instructions for installation, operating and maintenance of the Severe Duty Monitor.
STYLE 3492 Severe Duty Hydraulic Monitor INSTALLATION, OPERATING and MAINTENANCE INSTRUCTIONS The following is intended to provide the basic instructions for installation, operating and maintenance of
More informationManual: GH2B-MCH Mini Simo Power Unit
Understand manual before use. Operating AMKUS Rescue Systems without understanding the manual, receiving proper training, and using appropriate personal protective equipment is a misuse of AMKUS equipment.
More information8296 Portable Monitor Operating & Maintenance Instructions
8296 Portable Monitor Operating & Maintenance Instructions PHYSICAL: 1302 WEST BEARDSLEY AVE ELKHART, IN 46514 WWW.ELKHARTBRASS.COM MAILING: P.O. BOX 1127 ELKHART, IN 46515 1-574-295-8330 1-800-346-0250
More informationOwner s Manual & Safety Instructions
Owner s Manual & Safety Instructions Save Save This This Manual Keep Keep this this manual manual for for the the safety safety warnings warnings and and precautions, assembly, assembly, operating, inspection,
More informationThe safest, lightest, most versatile initial attack monitor ever!
The safest, lightest, most versatile initial attack monitor ever! With SafeTak II Automatic Shut-Off Valve Rated Flow 500 GPM Nominal Size 2.5" Nominal Area 4.9 sq. in. Weight 22 lbs. Folded Size 25.5"
More informationMANUAL: HURRICANE & HURRICANE RC MONITOR
MANUAL: HURRICANE & HURRICANE RC MONITOR See Remote Control (RC) Monitor Electrical Controls Supplemental Instructions For Use With Hurricane RC Models (LIY-500) INSTRUCTIONS FOR INSTALLATION, SAFE OPERATION
More informationMANUAL: HYDRANT UNDER MONITOR (HUM)
MANUAL: HYDRANT UNDER MONITOR (HUM) INSTRUCTIONS FOR INSTALLATION, SAFE OPERATION AND MAINTENANCE Understand manual before use. Operation of this device without understanding the manual WARNING and receiving
More informationESCONDIDO FIRE DEPARTMENT TRAINING MANUAL DRIVER OPERATOR PUMPING PAGE 1 OF 6 Nozzles & Hose Revised
PUMPING 06-30-17 PAGE 1 OF 6 TFT Task Force Tip Combination Nozzles There are two sizes of hand line nozzles, 1 ½ and 2 ½. Our 1 ½ nozzles are Task Force Tip (TFT) combination nozzles. They are primarily
More informationp.t.o. Slip clutch Read this material before using this product. Failure to do so can result in serious injury. Save this manual.
p.t.o. Slip clutch 65517 Installation Instructions Distributed exclusively by Harbor Freight Tools. 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our website at: http://www.harborfreight.com Read
More informationMANUAL: HURRICANE MONITOR SERIES
MANUAL: HURRICANE MONITOR SERIES See Remote Control (RC) Monitor Electrical Controls Supplemental Instructions For Use With Hurricane RC Models (LIY-500) INSTRUCTIONS FOR INSTALLATION, SAFE OPERATION AND
More informationMaximum Flow: 600 GPM (3800 LPM) Portable Base 1250 GPM (4800 LPM) Direct Mount. Maximum Pressure: 200 PSI (1380 Kpa, 13.8 BARS)
STYLE 3414 Apollo S.I. Monitor with FoldING Legs OPERATING & MAINTENANCE INSTRUCTIONS WITH SPECIAL L.A. COUNTY SPECIFICATIONS The Akron Style 3414 Apollo Monitor is designed to provide efficient trouble-free
More informationMANUAL: INSTRUCTIONS FOR INSTALLATION, SAFE OPERATION AND MAINTENANCE
MANUAL: Ball Intake Valve Ball Intake Valve RC Jumbo Ball Intake Valve Jumbo Ball Intake Valve RC INSTRUCTIONS FOR INSTALLATION, SAFE OPERATION AND MAINTENANCE Understand manual before use. Operation of
More informationFull Flow Drinking Water System Model: 3MFF100
Installation and Operating Instructions For Full Flow Drinking Water System Model: 3MFF100 System tested and Certified by NSF International against NSF/ANSI Standard 42 and 53 for the reduction of the
More informationHead to Head Demo Comparison Sheet
Head to Head Demo Comparison Sheet Task Force Tips Quadrafog and Thunderfog Selectable Gallonage Nozzle The purpose of this document is to encourage you to compare TFT products head to head, apples to
More informationrc3 & RC4 DANGER Telescoping Waterway for Deck Mounted Monitors For use with Serial # s above X TASK FORCE TIPS, INC. MADE IN USA
rc3 & RC4 Telescoping Waterway for Deck Mounted Monitors For use with Serial # s above X50563 INSTRUCTIONS FOR INSTALLATION, SAFE OPERATION AND MAINTENANCE DANGER Read instruction manual before use. Operation
More informationMANUAL: HURRICANE & HURRICANE RC MONITOR
MANUAL: HURRICANE & HURRICANE RC MONITOR See Remote Control (RC) Monitor Electrical Controls Supplemental Instructions For Use With Hurricane RC Models INSTRUCTIONS FOR INSTALLATION, SAFE OPERATION AND
More informationOWNER S MANUAL GUZZLER MODEL 620 READ THESE INSTRUCTIONS BEFORE USING
OWNER S MANUAL GUZZLER MODEL 620 OPERATION MAINTENANCE TROUBLE SHOOTING REPAIR PARTS WARRANTY READ THESE INSTRUCTIONS BEFORE USING 201 COMMERCE DRIVE MONTGOMERYVILLE, PA 18936 215-393-4700 800-331-1423
More informationIMPORTANT SAFETY INSTRUCTIONS
Table of Contents Safety... 2 Specifications... 3 Functions... 4 Operation... 5 Maintenance... 7 Warranty... 7 SAFETY SPECIFICATIONS OPERATION MAINTENANCE WARNING SYMBOLS AND DEFINITIONS This is the safety
More informationSPECIFICATIONS CONTENTS:
Model 3052A 1,100 Lbs Air Assist 2 Stage Transmission Jack INSTRUCTION MANUAL CONTENTS: Page 1 Specifications Page 2 Warning Information Page 3 Assembly Page 4 Operating Instructions Page 4 Preventative
More informationESE Series Cast Iron Sewage Pumps
Owner s Manual ESE Series Cast Iron Sewage Pumps TABLE OF CONTENTS General Safety.................... 2 Specifications..................... 3 Installation.................... 4 & 5 Troubleshooting...................
More informationHead to Head Demo Comparison Sheet
Head to Head Demo Comparison Sheet Task Force Tips Handline Full Range Automatic Nozzle The purpose of this document is to encourage you to compare models head to head, apples to apples, with like models
More informationSTOP CITY PRESSURE BOOSTER PUMP INSTRUCTION MANUAL
CITY PRESSURE BOOSTER PUMP INSTRUCTION MANUAL MODEL #VP05, VP10 C US NSF/ANSI 372 255405 For loose, missing or damaged parts, or if the unit does not seem to be operating properly, please call before returning
More informationOwner s Manual GLASSLINED PUMP TANK
Owner s Manual GLASSLINED PUMP TANK ANSI/NSF 61 Annex G Thank You for purchasing a pump tank. Properly installed and maintained, it should give you years of trouble free service. If you should decide that
More information25 GALLON PORTABLE OIL LIFT
25 GALLON PORTABLE OIL LIFT Model 92859 SET UP AND OPERATING INSTRUCTIONS Diagrams within this manual may not be drawn proportionally. Due to continuing improvements, actual product may differ slightly
More information1250 LB. CAPACITY MECHANICAL WHEEL DOLLY
1250 LB. CAPACITY MECHANICAL WHEEL DOLLY 67287 SET-UP AND OPERATING INSTRUCTIONS Visit our website at: http://www.harborfreight.com Read this material before using this product. Failure to do so can result
More informationUltraJet Nozzle. AKRON BRASS COMPANY PH ( ) akronbrass.com
UltraJet Nozzle 4 AKRON BRASS COMPANY PH. 800.228.1161 (330.264.5678) akronbrass.com The UltraJet combines the powerful punch of a true smooth bore and the widespread protection of a full fog. This nozzle
More informationGH2A-MC Series Mini Power Unit User Information Manual
Understand manual before use. Operating AMKUS Rescue Systems without understanding the manual, receiving proper training, and using appropriate personal protective equipment is a misuse of AMKUS equipment.
More informationHALLMARK INDUSTRIES INC
Performance Part No. HP. CONVERTIBLE JET PUMP USER S MANUAL GPH of Water @ Total Discharge Pressure of 40 psi Max. Pressure Max suction (shallow well) Max Suction (deep well) Max GPM (@0 head) Max Discharge
More informationOwner s Manual & Safety Instructions
Owner s Manual & Safety Instructions Save This Manual Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product s
More informationFAIRFAX COUNTY FIRE & RESCUE DEPARTMENT TRAINING BULLETIN. ISSUED BY: Captain I Daniel D. Shaw, Fire Station 409-C
FAIRFAX COUNTY FIRE & RESCUE DEPARTMENT TRAINING BULLETIN NUMBER: DATE: DISTRIBUTION: I ISSUED BY: Captain I Daniel D. Shaw, Fire Station 409-C APPROVED BY: SUBJECT: Nozzle Inspection The nozzle is a vital
More informationMANUAL: IVUM and IVUM RC 4 INDUSTRIAL VALVE UNDER MONITOR
MANUAL: IVUM and IVUM RC 4 INDUSTRIAL VALVE UNDER MONITOR INSTRUCTIONS FOR INSTALLATION, SAFE OPERATION AND MAINTENANCE WARNING Understand manual before use. Operation of this device without understanding
More informationQUALITY MISTING PUMPS
DIRECT DRIVE TOTALLY ENCLOSED FAN COOLED 60200KH, 60201KH MISTING PUMP MANUAL INCLUDING: SPECIFICATION DATA, GENERAL SAFETY PRECAUTIONS, OPERATION, INSTALLATION, PARTS, MAINTENANCE & WARRANTY QUALITY MISTING
More information24-Hour Turnaround Factory Service 24-Hour Technical Hot-line: ORDERING INFORMATION THREAD ORDERING INFORMATION
Customer Technical Service: Customer Sales: International Sales: sts@tft.com sales@tft.com intsales@tft.com www.tft.com 24-Hour Turnaround Factory Service 24-Hour Technical Hot-line: 800-348-2686 ORDERING
More informationPart Number Mini Linear Lift Assembly Installation & Operator s Instruction Manual
Part Number 39644 Mini Linear Lift Assembly Installation & Operator s Instruction Manual April 1999 MV1505C Chore-Time Warranty Mini Linear Lift Assembly Manual Chore-Time Warranty Chore-Time Equipment
More informationSwing Arm Magnifying Lamp
Owner s Manual & Safety Instructions Save This Manual Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product s
More informationPremium Supply. Direct Push. Models PCK-3530-DP PCK DP PCK-530-DP. Operator s Manual and Installation Instructions
Direct Push Models PCK-3530-DP PCK-3530-2DP PCK-530-DP Operator s Manual and Installation Instructions Premium Supply 2038 West Interstate 30 866-934-0777 Proud members of: and June 20, 2018 Table of Contents
More informationATV TRACK KIT. Operator s Manual Installation Instructions Service Instructions Replacement Parts List. Effective Date: October, 2012
p/n 2258-642 ATV TRACK KIT Operator s Manual Installation Instructions Service Instructions Replacement Parts List Track Assembly Kits (p/n 1436-204) Mounting Assembly Kits (p/n 1436-205) 1436-815) Effective
More information1600 PSI ELECTRIC PRESSURE WASHER
MODEL NO.: XE03 SKU: 39-8508-6 1600 PSI ELECTRIC PRESSURE WASHER Owner s Manual QUESTIONS, PROBLEMS, MISSING PARTS? Before returning to your retailer, visit our web site or call our customer service at
More informationModel 1100 Turbine Flow Meter
Model 1100 Turbine Flow Meter INSTALLATION & INSTRUCTION MANUAL 8635 Washington Avenue Racine, Wisconsin 53406 Tel: 800-433-5263 or 262-639-6770 Fax: 800-245-3569 or 262-639-2267 www.hedland.com TABLE
More informationOWNER S MANUAL 40 LAWN AERATOR SAT-40 BH. Assembly Installation Operation Repair Parts. Visit us on the web! MODEL:
OWNER S MANUAL 40 LAWN AERATOR MODEL: SAT-40 BH Assembly Installation Operation Repair Parts For the latest product updates & setup tips: Visit us on the web! www.brinly.com Important: This manual contains
More informationSeries 957, 957N, 957Z, 957RPDA, 957NRPDA, 957ZRPDA
Series 957, 957N, 957Z, 957RPDA, 957NRPDA, 957ZRPDA Reduced Pressure Zone Assemblies Reduced Pressure Detector Assemblies Sizes: 2 1 2" 10" (65 250mm) Installation Service Repair Kits Maintenance RP/IS-957/957RPDA
More informationSPECIFICATIONS CONTENTS:
Model 3052 1,100 Lbs 2 Stage Transmission Jack INSTRUCTION MANUAL CONTENTS: Page 1 Specifications Page 2 Warning Information Page 3 Assembly Page 4 Operating Instructions Page 4 Preventative Maintenance
More informationGARDEN HOSE UTILITY PUMP
GARDEN HOSE UTILITY PUMP MODEL #HPP360, HPP12V, 473707 MODEL #HPP360, 473707 MODEL #HPP12V ATTACH YOUR RECEIPT HERE Purchase Date SAFETY INFORMATION Please read and understand this entire manual before
More informationSUNC1200 / ITEM #40882 SUBMERSIBLE UTILITY PUMP OPERATIONS MANUAL
SUNC1200 / ITEM #40882 SUBMERSIBLE UTILITY PUMP OPERATIONS MANUAL WWW.SUNRUNNERPOOL.COM Performance Model HP GPH of Water @ Total Feet Of Lift 0 ft. 5 ft. 10 ft. 15 ft. 20 ft. 25 ft. Max. Lift SUNC1200
More informationMulcher Operators Manual
Mulcher Operators Manual Skid Pro Attachments PO Box 982 Alexandria, MN 56308 October 2015 1 2 Contents 1. Introduction And Warranty... 4 1.1 Introduction... 4 1.2 Warranty... 4 2. Component Identification...
More informationManual Operated Floor Jack
Manual Operated Floor Jack OPERATING INSTRUCTIONS Note: There may be some slight differences in the appearance of the various manually-operated floor jacks, however the instructions in this manual apply
More informationCAMBELT TENSION GAUGE
CAMBELT TENSION GAUGE Model 96557 Operating Instructions Diagrams within this manual may not be drawn proportionally. Due to continuing improvements, actual product may differ slightly from the product
More informationIntended Use: Explanation of Signal Word Consequences
SAFETY INFORMATION & INSTRUCTION MANUAL Please read, understand, and follow all safety information contained in these instructions prior to the use of this device. Retain these instructions for future
More informationComponent Size Weight Capacity
Specifications Component Size Weight Capacity Top Shelf 72 W x 19-1/2 L 1500 lb Drawer A (x3) 37-3/8 W x 19-1/2 L x 2-1/4 H 154 lb each Drawer B 37-3/8 W x 19-1/2 L x 5-1/4 H 220 lb Drawer C 37-3/8 W x
More informationPremium Supply. Tilt Deck. Models PCK-TD PCK-PTD. Operator s Manual and Installation Instructions
Tilt Deck Models PCK-TD PCK-PTD Operator s Manual and Installation Instructions Premium Supply 2038 West Interstate 30 866-934-0777 Proud members of: and June 1, 2015 Table of Contents Introduction...
More informationBefore equipment use, please read this operation manual carefully. Serial Number: Date Purchased:
Pushed & Geared Trolleys OPERATION MANUAL This operation manual is intended as an instruction manual for trained personnel who are in charge of installation, maintenance, repair etc. Before equipment use,
More informationIMPORTANT SAFETY INFORMATION
Specifications Tricycle Height 26 Front Wheel 5/8 Axle Diameter, 13 Pneumatic Knobby Tire Back Wheels 5/8 Axle Diameter, 10 Pneumatic Knobby Tire Age Range 5 and up Weight Capacity 150 lb. IMPORTANT SAFETY
More information