Qty: R4 Type IV. R5R Type V (Round) Distribution. Distribution. L1 Single Long Arm. Single Short Double Arm Short Arm. 5G W/15,307lm

Transcription

1 YEAR Date: Customer: Project: Type: Qty: Ouray 00 Order Code: U U Series U Ouray 00 Pole Order Code: Series Height Finish Options Optics R Type I Distribution R Type II Distribution R Type III Distribution R Type IV Distribution RR Type V (Round) Distribution RS Type V (Square) Distribution PP Plane Projector Fixed Mounting S 60mm Slip Fitter SA Single Pole Adaptor May be combined with adjustable mounting S S Single Short Double Arm Short Arm L Single Long Arm L Double Long Arm W Wall Mount WD Decorative Wall Box Adjustable Mounting AT Adjustable Tilt AS Adjustable Swivel XX None Light Engine G0 W/,9lm G0 68W/7,lm G700 89W/9,08lm G0 6W/,7lm G0 8W/,07lm 7/80V and HL options cannot be combined with G0 Based on RI distributions at 000K CCT no glass. CCT 0 000K 0 000K Zero Uplight For other CCT, please consult factory. Power Cord Length XX XX Add length of arm & height of pole to determine power cord length Finish WH White BK Black BL Semi-Matte Black BZ Bronze SV Silver SP Specify Premium Color Voltage UNV V 0 0V 77 77V 7 7V 80 80V Specify for HL option Options DM Dimming (0-0V) HS House Shield (80 ) Motion Sensor with optional photocell See page for order code HL0, Hi-Lo Switching Low Output 0% TLRP, Twist Lock Receptacle -Pin w/ TE Connectivity Sensor HL0, Hi-Lo Switching Low Output 0% TLRP,,6 Twist Lock Receptacle 7-Pin w/ Eaton Connectworks Sensor CO 7 Comfort Optics (Not available with PP optics) TLRP,6 Twist Lock Receptacle 7-Pin w/ Acuity Roam Sensor TLR 6 Twist Lock Receptacle 7-Pin w/ Shorting Cap GL 7 Tempered Glass Lens Type I, II, III, and IV only. DM or HL only. Cannot be combined. 0V, 0V, 77V only. 6 Not available with DM or HL. 7 Glass is included with CO and PP options and does not need to be specified separately. Refer to page for sensor details. LED WARRANTY Selux Corporation 08, T , , F 8-8-0, Page of 6 (Rev. 0/08) ORY_ss_v0.0

2 U 7/6 (90mm) 8 /6 (8mm) 9/6 (9mm) Specifications. Fixture Housing - Die cast low copper marine grade aluminum body and door. Optional tempered glass lens.. Gasketing - Continuous molded silicone gasket provides weatherproofing, dust and insect control at all luminaire connections.. Access Door - Die cast low-copper marine grade aluminum door. Hinges open for tooless access to LED light engine and is retained in place with fixed hinge.. LED Array - High Flux LEDs mounted to metal core PCB and attached to external heat sink for maximum LED performance and life. CCT tolerance within a step bin and provided with a minimum CRI of 80. LED array has a reported lumen maintenance of 9% at 0,000 hours. L70 calculated greater than 00,000 hours. Exposed face rated to IP6.. LED Optics - Technical Optics (R, R, R, R, RS and RR) use Selux signature light pattern acrylic lens holder to secure proprietary silicone optics. Internal micro house side shield available for distributions types I, II, III & IV. Plane Projector (PP) optics available for uplighting. Comfort Optics (CO) option provided with fully diffuse glass. 6. LED Driver - LEDs are driven by RoHS compliant constant current programmable LED driver. Driver includes 0-0V dimming to 0%, meets the requirements of IP66. Driver assembly located inside the head and accessible through the hinged door. 7. Surge Protection - -Pole Surge Protection device safeguards electrical components from indirect lighting strikes and surges up to (0kA standard). RoHS compliant. Exterior Luminaire Finish - Selux utilizes a high quality Polyester Powder Coating. All Selux luminaires and poles are finished in our Tiger Drylac certified facility and undergo a five stage intensive pretreatment process where product is thoroughly cleaned, phosphated and sealed. Selux powder coated products provide excellent salt and humidity resistance as well as ultra violet resistance for color retention. All products are tested in accordance with test specifications for coatings from ASTM and PCI. Standard exterior colors are White (WH), Black (BK), Semi-Matte Black (BL), Bronze (BZ), and Silver (SV). Selux premium colors (SP) are available, please specify from your Selux color selection guide. Hot Dip Galvanized finish (GV) on all steel parts also available. Year Limited LED Luminaire Warranty - Selux offers a Year Limited Warranty to the original purchaser that Ouray LED luminaire shall be free from defects in material and workmanship for up to five () years from date of shipment. This limited warranty covers the fixture, LED driver and LED light engine when installed and operated according to Selux instructions. Fixture suitable for ambient temperatures of º C (º F). For details and exclusions, see Selux Terms and Condition of Sale. Listings and Ratings: Tested to IESNA LM and LM-80 test standards at º C ambient temperature. Rated for wet location. Visit selux.us for our LED End of Life recycling policy. Selux Corporation 08, T , , F 8-8-0, Page of 6 (Rev. 0/08) ORY_ss_v0.0

3 Mounting S - Single Short Arm S - Double Short Arm SA - Single Pole Adaptor EPA = 0.7ft (0.07m ) Weight = lbs. (0kg) EPA =.ft (0.m ) Weight = 0lbs. (8kg) EPA = 0.ft (0.0m ) Weight = 9lbs. (9kg) 7 /8 (688mm) /6 (77mm) 9 6 " 7mm 9 9/6 " (7mm) 7mm Pole Height Selux Corporation 08, T , , F 8-8-0, Page of 6 (Rev. 0/08) ORY_ss_v0.0

4 Mounting L - Single Long Arm L - Double Long Arm EPA =.ft (0.0m ) Weight = lbs. (0kg) EPA =.8ft (0.7m ) Weight = 0lbs. (8kg) 7 /8 (0mm) 9 /6 (mm) Pole Height Selux Corporation 08, T , , F 8-8-0, Page of 6 (Rev. 0/08) ORY_ss_v0.0

5 Ă " 7mm (FOR M6 BOLTS BY OTHERS) 6 6 " 60mm Ă " 7mm 8 " Ă 8" 0mm Ă 8" 0mm Ouray 00 Mounting Details S 60 mm Slip Fitter /6 (mm) /6 (8mm) /6 (8mm) FITS Ă 8 " TUBE Fits Ø /8 (60mm) W Wall Mount /8 " 8 (0mm) 6 /6 (60mm) WD Decorative Wall Box mm 8 " 66mm /8 (66mm) Ø8 (0mm) " 8mm/6 (8mm) " 0mm 6 6 " 60mm /8 (mm) /8 8 " 0mm (0mm) 6 " 0mm x PLUGS AND /" WATERTIGHT COMPRESSION CONNECTOR INSTALLED IN THE FIELD BY OTHERS (EVERY 90 Ā) " 8 0mm x Plugs & / x PLUGS Watertight AND /" WATERTIGHT COMPRESSION CONNECTOR INSTALLED IN THE FIELD BY OTHERS (EVERY 90 Ā) Compression Connector Installed by others (Every 90 ) (FOR M6 BOLTS BY OTHERS) Ă 9 6 " 0mm 6 6 /6 (60mm) " 60mm " / (0mm) " (0mm) " 0mm /8 " 8 (0mm) /6 6 " 0mm (0mm) " (0mm) x Ø /8 (9mm) x Ă 8 " 9mm For M8 Bolts by Others (FOR M8 BOLTS BY OTHERS) " 0mm Ø/ (7mm) Ø 9/6 Ă 9 6 " (0mm) x Ă 8 " 9mm (FOR M8 BOLTS BY OTHERS) Selux Corporation 08, T , , F 8-8-0, Page of 6 (Rev. 0/08) ORY_ss_v0.0

6 6 8 " mm 7mm 6 " 7mm 6 " 7mm Ouray 00 Mounting Details AT Adjustable Tilt AS Adjustable Swivel EPA = 0.ft (0.0m ) Weight =.lbs. (.kg) AT/AS mounting only - Add to primary mounting values. EPA = 0.ft (0.0m ) Weight =.lbs. (.kg) AT/AS mounting only - Add to primary mounting values. Adjustable arm located between fixture head and fixed mounting. /6 6" (7mm) /6 (7mm) 6 /8 (mm) 6 /8 6 8 " (mm) /6 (7mm) /6 6 " 7mm (7mm) Tilt +/- 90 in. increments Swivel +/- 90 in. increments Selux Corporation 08, T , , F 8-8-0, Page 6 of 6 (Rev. 0/08) ORY_ss_v0.0

7 Pole Information Refer to pole specification sheets for construction details, anchorage information and additional options. Optional Base Covers for Poles Die cast aluminum. A/S Round Straight & Aluminum Steel Pole / (90mm) A0 Round Straight Aluminum Pole (0mm) AT / AT6 / AT7 Tapered Aluminum Pole BC Optional Base Cover (A/S) One-piece cast aluminum / (89mm) /8 (0mm) BC Optional Base Cover (AT) Die cast aluminum, two-piece field installable base cover. Ø (7mm) /6 (mm) Ø /8 (0mm) Ø 7/6 (6mm) Pole Height Pole Height Pole Height BC9 Optional Base Cover (AT6) Die cast aluminum, two-piece field installable base cover. Ø6 (mm) 8/8 (0mm) BC0 Optional Base Cover (AT7) Die cast aluminum, two-piece field installable base cover. Ø7 (78mm) 8 /8 (0mm) Ø0/8 (8mm) Ø0 /8 (8mm) 6 (660mm) 8 (7mm) 8 (7mm) BC Optional Base Cover (A0) Die cast aluminum, two-piece field installable base cover. Ø (0mm) Ø / (6mm) /6 (mm) Pole Data Chart Pole Series Bolt Circle EPA Information (ft ) 70mph 80mph 90mph 00mph 0mph A /" Round Straight Aluminium Pole Ø7 /" A0 " Round straight Aluminium Pole Ø7 /" AT " to /" Round Tapered Aluminium Pole Ø8 /8" AT6 6" to " Round Tapered Aluminium Pole Ø9 / S /" Round Straight Steel Pole Ø7 / A /" Round Straight Aluminium Pole Ø7 / A0 " Round Straight Aluminium Pole Ø7 /" AT " to /" Round Tapered Aluminium Pole Ø8 /8" AT6 6 to Diameter Round Tapered Aluminum Pole Ø9 / S /" Round Straight Steel Pole Ø7 / A /" Round Straight Aluminium Pole Ø7 /" A0 " Round straight Aluminium Pole Ø7 /" AT " to /" Round Tapered Aluminium Pole Ø8 /8" AT6 6 to Diameter Round Tapered Aluminum Pole Ø9 / S /" Round Straight Steel Pole Ø7 / AT " to /" Round Tapered Aluminium Pole Ø8 /8" AT6 6 to Diameter Round Tapered Aluminum Pole Ø9 / AT7 7 to Diameter Round Tapered Aluminum Pole Ø0 9/ Height Finish Options ft. ft. 6 6 ft. 8 8 ft. WH White BK Black BL Semi- Matte Black BZ SV SP Bronze Silver Specify Premium Color BC Decorative Cast Aluminum Base Cover (A/S pole only) BC Decorative Cast Aluminum Base Cover (AT pole only) BC9 Decorative Cast Aluminum Base Cover (AT6 pole only) BC0 Decorative Cast Aluminum Base Cover (AT7 pole only) BC Decorative Cast Aluminum Base Cover (A0 pole only) REC GFCI Receptacle with weather-proof cover REC GFCI Receptacle with padlockable in-use cover T / Diameter Tenon, /" high (Use for A0/ AT6 / AT7 only) Allowable EPA calculated according to AASHTO 99 and include allowance for / gust factor. See Mounting Configuration pages for fixture arm weight and EPA values. Selux Corporation 08, T , , F 8-8-0, Page 7 of 6 (Rev. 0/08) ORY_ss_v0.0

8 Pole Information Refer to pole specification sheets for construction details, anchorage information and additional options. Bolt Circle for A & S Use caution when setting anchor bolts. Bolts must be vertically straight and centered on dimensions shown Anchor Bolt Detail for A & S / x 7 Galvanized Anchor Bolts / -0 Galvanized Heavy Hex Nut 7 / (97mm) A/S POLE ONLY 07 / (97mm) Bolt Circle / (8mm) / (9mm) ID Galvanized Flat Washers Hand Hole Location 0 (76mm) Conduit Opening Note: Adequate drainage must be provided in concrete foundation. / (mm) for leveling / - 0 Galvanized Heavy Hex Leveling Nut Concrete footing designed and supplied by others Bolt Circle for A0 Use caution when setting anchor bolts. Bolts must be vertically straight and centered on dimensions shown Hand Hole Location HANDHOLE SIDE OF POLE. 8 8 /6" /6 (7mm) [7mm] SQUARE /6" [mm] /6 (mm) A0 POLE ONLY 07 / (9mm) Ă7 /" [Ă9mm] Bolt Circle BOLT CIRCLE 0 / (9mm) Ă /" [Ă9mm] Conduit CONDUIT OPENINGOpening Note: Adequate drainage must be provided in concrete foundation. Anchor Bolt Detail for A0 / (8mm) /" [8mm] / /" (mm) [mm] for FOR leveling LEVELING / -0 UNC x 7" Partially /-0 UNC Galvanized X 7" PARTIALLY Anchor GALVANIZED Bolt ANCHOR BOLT /-0 UNC GALVANIZED Galvanized HEAVY HEX NUT Heavy Hex Nut / I.D. ID GALVANIZED Galvanized FLAT WASHER Flat Washers / -0 UNC /-0 UNC GALVANIZED Galvanized Hex Leveling Nut HEAVY HEX LEVELING NUT Concrete CONCRETE footing designed and supplied by others Bolt Circle for AT Use caution when setting anchor bolts. Bolts must be vertically straight and centered on dimensions shown 9 /8" /8 [mm] (mm) SQUARE 6 /8" [mm] 6 /8 (mm) 08 /8 (9mm) Ă8 /8" [Ă9mm] Bolt BOLT Circle CIRCLE Anchor Bolt Detail for AT / (8mm) /" [8mm] / -0 x 7" Partially /-0 UNC X Galvanized 7" PARTIALLY Heavy Hex GALVANIZED Nut ANCHOR BOLT /-0-0 UNC GALVANIZED Galvanized HEAVY HEX NUT Heavy Hex Nut / I.D. ID GALVANIZED Galvanized FLAT WASHER Flat Washers Hand Hole Location HANDHOLE SIDE OF POLE. 0 Ă /" / [Ămm] (mm) CONDUIT OPENING Conduit Opening / /" (mm) [mm] for FOR leveling LEVELING / - 0 Galvanized /-0 UNC GALVANIZED Heavy Hex Leveling HEAVY HEX LEVELING Nut NUT CONCRETE Concrete footing designed and supplied by others Selux Corporation 08, T , , F 8-8-0, Page 8 of 6 (Rev. 0/08) ORY_ss_v0.0

9 Pole Information Refer to pole specification sheets for construction details, anchorage information and additional options. Bolt Circle for AT6 Use caution when setting anchor bolts. Bolts must be vertically straight and centered on dimensions shown Anchor Bolt Detail for AT6 0 /6 0 /6" [6mm] (6mm) SQUARE Square 6 /" [7mm] 6 / (7mm) 09 / (mm) Bolt Ă9 /" Circle [Ămm] BOLT CIRCLE / (89mm) /" [89mm] / -0 x 7" Partially /-0 UNC X Galvanized 7" PARTIALLY Heavy Hex GALVANIZED Nut ANCHOR BOLT /-0-0 UNC GALVANIZED Galvanized HEAVY HEX NUT Heavy Hex Nut / I.D. ID GALVANIZED Galvanized FLAT WASHER Flat Washers Hand Hole Location HANDHOLE SIDE OF POLE. 0 Ă /" / [Ă0mm] (0mm) CONDUIT OPENING Conduit Opening / /" (mm) [mm] for FOR leveling LEVELING / - 0 Galvanized /-0 UNC GALVANIZED Heavy Hex Leveling HEAVY HEX LEVELING Nut NUT CONCRETE Concrete footing designed and supplied by others Bolt Circle for AT7 Use caution when setting anchor bolts. Bolts must be vertically straight and centered on dimensions shown Anchor Bolt Detail for AT7 / /" (86mm) [86mm] SQUARE Square 7 /" [90mm] 7 / (90mm) 00 Ă0 9/6" 9/6 [Ă68mm] (68mm) BOLT CIRCLE Bolt Circle /8 (0mm) /8" [0mm] "-8 UNC x 6" Partially "-8 UNC X 6" Galvanized PARTIALLY Heavy GALVANIZED ANCHOR BOLT Hex Nut UNC GALVANIZED "-8 UNC HEAVY HEX NUT Galvanized Heavy Hex Nut " I.D. ID GALVANIZED FLAT WASHER Galvanized Flat Washers Hand Hole Location HANDHOLE SIDE OF POLE. 06 Ă6" [Ămm] (mm) CONDUIT OPENING Conduit Opening / /" (mm) [mm] for FOR leveling LEVELING "-8 Galvanized "-8 UNC GALVANIZED Heavy Hex HEAVY HEX LEVELING NUT Leveling Nut CONCRETE Concrete footing designed and supplied by others Selux Corporation 08, T , , F 8-8-0, Page 9 of 6 (Rev. 0/08) ORY_ss_v0.0

10 Wiring Diagrams Standard Wiring for UNV, 0V, and 77V Standard wiring for 0-77V with no additional options. SURGE PROTECTOR Standard Wiring for 7/80V Standard wiring for 7/80V with no additional options. SURGE PROTECTOR AUTO TRANSFORMER FROM FEED CORD L N SPARE SPARE BLACK WHITE GREEN RED ORANGE CAPPED INSIDE FIXTURE DRIVER / LIGHT ENGINE FROM FEED CORD L N SPARE SPARE BLACK WHITE GREEN RED ORANGE CAPPED INSIDE FIXTURE DRIVER / LIGHT ENGINE 0-0V Dimming Option (DM) Wiring for UNV 00% light output at 0V, down to % light output at 0V. SURGE PROTECTOR 0-0V Dimming Option (DM) Wiring for 7/80V 00% light output at 0V, down to % light output at 0V. L BLACK SURGE PROTECTOR AUTO TRANSFORMER FROM FEED CORD N DIM (+) DIM (-) WHITE GREEN RED ORANGE Hi-Lo Switching Option (HL0/HL0) Wiring 0/0/77V. When red is energized, light output will be 0%/0% at "Lo" level. DRIVER / LIGHT ENGINE FROM FEED CORD L N DIM (+) DIM (-) BLACK WHITE GREEN RED ORANGE DRIVER / LIGHT ENGINE SURGE PROTECTOR L BLACK FROM FEED CORD N WHITE GREEN DRIVER / LIGHT ENGINE SPARE L ORANGE RED CAPPED INSIDE FIXTURE RELAY Selux Corporation 08, T , , F 8-8-0, Page 0 of 6 (Rev. 0/08) ORY_ss_v0.0

11 Optional Accessories (TLRP, TLRP, TLRP) 7-Pin Twist Lock Receptacle with Photocell Ø 7/8 (7mm) Ă 7 8 " 7mm / (6mm) " 6mm (TLR) 7-Pin Twist Lock Receptacle with shorting cap. Ø Ă 7 7/8 8 " (7mm) /8 8 " (60mm) See exact dimensions on spec sheet for selected Photocell TLRP = TE Connectivity BF Series (BF-PV) -Pin TLRP = Eaton Connectworks (ISLC-00-7P-S) 7-Pin TLRP = Acuity Roam Node (REN7-DVX-A-O-G/REN7-DVX-A-O-G/REN80-DVX-A-O-G) 7-Pin GFCI Receptacle (REC) - 0V A GFCI duplex receptacle with weather-proof, self-closing, non-lockable cover; located 6 (9mm) from base of pole, inline with handhole. Receptacle is intended only for portable tools or other portable equipment to be connected to outlet only when attended by operating personnel. For use with 0V applications only. For use with luminaires with other than 0V rating, please consult factory for wire segregation. GFCI Receptacle (REC) - 0V A GFCI duplex receptacle with weather-proof, self-closing, padlockable in-use cover; located 6 (9mm) from base of pole, inline with handhole. Receptacle is intended only for portable tools or other portable equipment to be connected to outlet only when attended by operating personnel. For use with 0V applications only. For use with luminaires with other than 0V rating, please consult factory for wire segregation. / (70mm) /8 (mm) 9/6 (9mm) / (8mm) / (mm) 6 /6 (70mm) Pole (Generic view) Pole (Generic view) Selux Corporation 08, T , , F 8-8-0, Page of 6 (Rev. 0/08) ORY_ss_v0.0

12 Motion Sensor Features The Selux outdoor rated sensor incorporates Passive Infrared (PIR) technology for motion sensing and also includes a built in photocell. Designed to mount directly through a / KO in a single gang faceplate on pole/column, the SBO utilizes 00% Digital Passive Infrared (PIR) technology that is tuned for walking size while preventing false tripping from the environment. Series Optics Hand Hole Orientation Program MS 70 coverage - D0 (0V=0%) Y Yes UNV 00 WH White Single Sensor Motion Sensor 09 D (V=0%) BK Black N No 7 REVISIONS REV. ECN DESCRIPTION DATE BY APPR BY 8 D (V=0%) 80 0BZ Bronze XXXX CREATED FOR MARKETING 09//06 FAH DRW 7 D (V=0%) TO DETAIL MODIFICATION TO A POLES AND COLUMNS FOR SENSOR MOUNTING ORIENTATION 07//07 FAH DRW NOTE: Motion sensor comes programmed at 0% dimmed level with a min. delay as default. All programming required LOGIC after shipping by others. Color Photocell Feature Voltage X Ă.6. THRU 8- UNC THRU " (0mm) 0.00 General Pole Drawing For Example Only Overall OVERALL Pole POLE Height HEIGHT X Ă THRU DETAIL A SCALE : SENSOR Sensor ANGULAR angular orientation ORIENTATION from FROM hand hole HAND 0 HOLE 0 90 INCREMENTS CLOCKWISE AROUND POLE (TYPE 00,09,8,7) 90 increments clockwise around pole (Type 00,09,8,7) TYPE 09 (90 ) ANGULAR ORIENTATION FROM HAND HOLE 0Ā NTS CLOCKWISE AROUND POLE (TYPE 00,09,8,7) TYPE 09 (90Ā) HAND HOLE LOCATION TYPE 00 (0 ) TYPE 8 (80 ) TYPE 8 (80Ā) TYPE 7 (70 ) TOP VIEW Selux Corporation 08, T , , F 8-8-0, alter the function TYPE 7 of (70Ā) the product. Specification sheets found at are the most recent versions and supercede all other printed or electronic versions. TOP VIEW Page of 6 (Rev. 0/08) ORY_ss_v0.0

13 Motion Sensor Features 00% Digital PIR Detection, excellent RF Immunity 70 coverage pattern Up to 0ft mounting IP66 Rated for outdoor applications Built-in kv surge protection No minimum load requirements Made for LED light source Interchangeable hot and load wires - impossible to wire backwards Adjustable time delays, max/min dim levels and ramp rates Programming button accessible without opening sensor or removing gaskets No field calibration or sensitivity adjustments required Non-volatile setting memory Convenient test mode Suitable for Title applications Motion Sensor Wiring Diagram BLK WHT BLK VIO GRY SBO SENSOR BLK WHT GRN BLK WHT GRN RED ORG FIXTURE FEED CORD BLK WHT GRN RED ORG WEATHERPROOF WIRE CONNECTOR, 600V 8-8GA (SUPPLIED) LINE CORD ATTACH CORD TO BACK OF SENSOR MOUNTING PLATE WITH ZIP TIES (NOT SUPPLIED) Selux Corporation 08, T , , F 8-8-0, Page of 6 (Rev. 0/08) ORY_ss_v0.0

14 Photometry R Optics / W LED / 000K CCT Catalog #: U-R-XX-XX-G0-0-XX-UNV Delivered Lumens: 9lm Input Watts: W Efficacy: lm/w CCT: 000K CRI (Ra): >80 Maximum candela of 66 at from vertical. IES classification: Type II Mounting Height: 6 (.9 m) BUG Rating: B-U0-G Power Factor: Total Harmonic Distortion: 0.% House Street Maximum Candela = 66. Located At Horizontal Angle =, Vertical Angle = # - Vertical Plane Through Horizontal Angles ( - ) (Through Max. Cd.) Distance In Units Of Mounting Height Values Based On 6 Foot Mounting Height R Optics / W LED / 000K CCT Catalog #: U-R-XX-XX-G0-0-XX-UNV Delivered Lumens: 97lm Input Watts: W Efficacy: lm/w CCT: 000K CRI (Ra): >80 Maximum candela of 60 at 6. from vertical. IES classification: Type III Mounting Height: 6 (.9 m) BUG Rating: B-U0-G Power Factor: Total Harmonic Distortion: 0.% House Street Maximum Candela = 60.6 Located At Horizontal Angle = 6., Vertical Angle = 6. # - Vertical Plane Through Horizontal Angles (6. -.) (Through Max. Cd.) Distance In Units Of Mounting Height Values Based On 6 Foot Mounting Height R Optics / W LED / 000K CCT Catalog #: U-R-XX-XX-G0-0-XX-UNV Delivered Lumens: 88lm Input Watts: W Efficacy: lm/w CCT: 000K CRI (Ra): >80 Maximum candela of 0 at 60 from vertical. IES classification: Type III Mounting Height: 6 (.9 m) BUG Rating: B-U0-G Power Factor: Total Harmonic Distortion: 0.% House Street Maximum Candela = 0 Located At Horizontal Angle =, Vertical Angle = 60 # - Vertical Plane Through Horizontal Angles ( - ) (Through Max. Cd.) Distance In Units Of Mounting Height Values Based On 6 Foot Mounting Height Selux Corporation 08, T , , F 8-8-0, Page of 6 (Rev. 0/08) ORY_ss_v0.0

15 Photometry R Optics / W LED / 000K CCT Catalog #: U-R-XX-XX-G0-0-XX-UNV Delivered Lumens: 88lm Input Watts: W Efficacy: 0 lm/w CCT: 000K CRI (Ra): >80 Maximum candela of 9 at 6. from vertical. IES classification: Type III Mounting Height: 6 (.9 m) BUG Rating: B-U0-G Power Factor: Total Harmonic Distortion: 0.% House Street Maximum Candela = 9. Located At Horizontal Angle =, Vertical Angle = 6. # - Vertical Plane Through Horizontal Angles ( - ) (Through Max. Cd.) Distance In Units Of Mounting Height Values Based On 6 Foot Mounting Height RR Optics / W LED / 000K CCT Catalog #: U-RR-XX-XX-G0-0-XX-UNV Delivered Lumens: 08lm Input Watts: W Efficacy: lm/w CCT: 000K CRI (Ra): >80 Maximum candela of 6 at 7. from vertical. IES classification: Type V Mounting Height: 6 (.9 m) BUG Rating: B-U0-G Power Factor: Total Harmonic Distortion: 0.% House Street Maximum Candela = 6.8 Located At Horizontal Angle = 0, Vertical Angle = 7. # - Vertical Plane Through Horizontal Angles (0-80) (Through Max. Cd.) Distance In Units Of Mounting Height Values Based On 6 Foot Mounting Height RS Optics / W LED / 000K CCT Catalog #: U-RS-XX-XX-G0-0-XX-UNV Delivered Lumens: 06lm Input Watts: W Efficacy: lm/w CCT: 000K CRI (Ra): >80 Maximum candela of 768 at 60 from vertical. IES classification: Type VS Mounting Height: 6 (.9 m) BUG Rating: B-U0-G Power Factor: Total Harmonic Distortion: 0.% House Street Maximum Candela = 768. Located At Horizontal Angle =, Vertical Angle = 60 # - Vertical Plane Through Horizontal Angles ( - ) (Through Max. Cd.) Distance In Units Of Mounting Height Values Based On 6 Foot Mounting Height Selux Corporation 08, T , , F 8-8-0, Page of 6 (Rev. 0/08) ORY_ss_v0.0

16 Photometry PP Optics / W LED / 000K CCT Catalog #: U-PP-XX-XX-G0-0-XX-UNV Delivered Lumens: lm Input Watts: W Efficacy: 98 lm/w CCT: 000K CRI (Ra): >80 Maximum candela of at from vertical. IES classification: Type III Mounting Height: 6 (.9 m) BUG Rating: B-U0-G Power Factor: Total Harmonic Distortion: 0.% House Street Maximum Candela = Located At Horizontal Angle =, Vertical Angle = # - Vertical Plane Through Horizontal Angles ( - ) (Through Max. Cd.) Distance In Units Of Mounting Height Values Based On 6 Foot Mounting Height R Optics / W LED / 000K CCT Catalog #: U-R-XX-XX-G0-0-XX-UNV-HS Delivered Lumens: 9lm Input Watts: W Efficacy: 7 lm/w CCT: 000K CRI (Ra): >80 Maximum candela of 7 at 6. from vertical. IES classification: Type II Mounting Height: 6 (.9 m) BUG Rating: B0-U0-G Power Factor: Total Harmonic Distortion: 0.% House Street House Shield Example Maximum Candela = 7.7 Located At Horizontal Angle = 7, Vertical Angle = 6. # - Vertical Plane Through Horizontal Angles (7 - ) (Through Max. Cd.) Distance In Units Of Mounting Height Values Based On 6 Foot Mounting Height Complete photometric matrix is available for download from website along with all House Shield photometry. Selux Corporation 08, T , , F 8-8-0, Page 6 of 6 (Rev. 0/08) ORY_ss_v0.0