M36 LED Recessed Quickship

Transcription

1 Date: Customer: Project: Type: Qty: M36 Order Code: - 1B LW WH - UNV - Series QL36 M36 LED Multi Mount Form Quickship QL36R1 Continuous Flange Quickship (Flanged Endcaps) 1B35 Light Engine 1B lm/9.2W per foot 1 Values calculated from a K using LW Shielding and DIM driver. For additional information please see page 7. CCT K K LW Shielding Mounting QL36 or Mounting QL36R1 LW LED Optimized white lens SF2 Spackle Flange (5/8 Drywall) TB T-Bar w/ suspension clips TBS T-Bar w/1 1/4-20 Stud RC Rotating Crossbar (Ceilings 1/4 to 2 thick ) Fixture ft ft ft ft. Individual fixtures and Runs are supplied in nominal lengths to ensure full, even illumination. See page 2 for additional details. XX Runs (over 8 ) available in 1 ft nominal increments Replace the XX with the footage (I.E. 09=9 nominal) 2 intended to fit centered between the grid for TB, TBS mountings. WH UNV Finish Voltage WH White UNV 120 thru /60hz capable Driver DIM 3 DM 3 DML V (Linear) Product Modifications Please list modification requirements for review by factory: eldoled eldoled SOLOdrive 0-10V SOLOdrive (Linear) 0-10V (Logarithmic) DC3 3 Lutron 3-Wire DCE 3 Lutron Eco-System 3 See page 6 for full details Approvals 5YEAR LED WARRANTY ARRA Compliant Page 1 of 7

2 LMO Lens 1 13 /16 (46mm) 2 13 /16 (72mm) 2 13 /16 (72mm) 1 5 /16 (34mm) 1 5 /16 (34mm) 1 7 /16 (37mm) 2 7 /16 (62mm) Construction: Housing - Continuous, low copper 6063-T6 extruded aluminum profile with aluminum end caps, available as Individual fixtures or Runs. Flange - 9/16 (14mm) wide flange runs full lengths of both sides and is part of the main extruded body. Geartray - Low copper 6063-T6 extruded aluminum profile. Shielding - Extruded, impact resistant acrylic snap in lens: - LED optimized white lens (LW) Mounting(s) - Spackle flange in (drywall), T-bar grid and Rotating Crossbar (see pages 3 thru 5 for details). Standard Luminaire lengths - All standard luminaires are supplied in nominal lengths to ensure full, even illumination. Runs are available in nominal 1 increments starting at the nominal 8 fixture length. ** Individual luminaires are not joinable in the field. M36 Joiner(s) - Runs are supplied in multiple housings that are joined together in the field using the supplied M36 Joiner System. This allows ease of installation and ensures a uniform appearance (see page 7 for detail). Weight: 1.8lb. per foot Electrical/Performance: LED Light Engine - Brand-name mid-power LEDs create a high efficiency LED light engine able to provide a lumen maintenance of 96% at 25,000 hours and 93% at 60,000 25ºC per TM-21 reports. Reported L70 greater than 60,000 hours. Delivered Lumens - Due to LED manufacturer s tolerances, the listed output has a ±5% tolerance. For outputs based on different CCT, please see photometry section at the end. CCT - Available in 3000K and 3500K, tolerance within a 3-step MacAdam ellipse. CRI - Min. 90. All Drivers - High efficiency, constant current, soft start, Electronic Class 2 with a PFC>0.90. For more detailed information on the available drivers please see page 6. Thermal Performance: Ambient Operating Temperature - Luminaires suitable for Max. ambient temperature of 35 C (95 F) for all drivers. Min. ambient temperature of: -20 C (-4 F) for the DIM, DM and DML drivers 0 C (32 F) for the DC3 and DCE drivers Luminaire Finish: Powder Coat - All Selux luminaries are finished in high quality polyester powder coating in our Tiger Drylac certified facility and are tested in accordance with test specifications for coatings from ASTM and PCI. All products undergo a five stage intensive pretreatment process where product is thoroughly cleaned, phosphated, and sealed. Selux powder coated products provide excellent salt and humidity resistance as well as ultraviolet resistance for color retention. Standard interior Quickship color is White (WH). Warranty: 5 Year Limited LED Luminaire Warranty - Selux offers a 5 Year Limited Warranty to the original purchaser that the M60 series LED luminaire shall be free from defects in material and workmanship for up to five (5) years from date of shipment. This limited warranty covers the LED driver and LED light engine when installed according to Selux instructions and operated within the Ambient Temperature. For additional details and exclusions, see Selux Terms and Condition of Sale. Certifications and Compliance: NRTL - For Dry location (I.E. culus; ccsaus) ARRA Compliant RoHS Compliant IC-Rated Page 2 of 7

3 5/8 Spackle Flange Mounting (SF2) 5/8 Spackle Flange Mounting (SF2) Installation brackets 9 Spackle Flange Mounting (SF2) - Dimensions A O.A.L. w/o Flange B End Suspensions * C (Ref.) Mid. Suspension D Feed Location Feet/Inch MM Feet/Inch MM Feet/Inch MM Feet/Inch MM 02 (2 ft.) 1' /16" 595 0' - 1 5/8" 41 1' - 8 3/16" 513 0' - 4 1/8" (4 ft.) 3' /16" ' - 6 1/8" 156 2' /16" 894 0' - 2 1/8" (6 ft.) 5' /16" ' - 6 1/8" 156 4' /16" ' - 2 1/8" (8 ft.) 7' /16" ' - 6 1/8" 156 6' /16" ' - 2 1/8" 54 *Dimension(s) rounded to the nearest 1/16 with a ± 1/16 (1mm) tolerance. 1. 1/4-20 Threaded rod to structure (supplied and installed by others) Coupler hardware (supplied and installed by others) /4-20 Stud (by Selux). 4. Ø5/16 [Ø7mm] mounting hole. 5. Drywall/Sheetrock screw (Ref.) 6. Drywall/Sheetrock (Ref.) 7. 1/16 Plaster skimcoat (Ref.) 8. Drywall/Sheetrock tape (Ref.) 9. Luminaires ship with the brackets pre-installed. - The brackets cannot be removed until the fixture is completely installed and secured through the spackle flange. - Once the brackets are removed, the lens can be installed. Page 3 of 7

4 T-Bar Mounting (TB) T-Bar with Stud Mounting (TBS) T-Bar with Suspension Clips (TB) (9/16 or 15/16 grid) T-Bar with 1/4-20 Stud (TBS) (9/16 or 15/16 grid) 1. Support wire to structure (supplied and installed by others). 2. Spring steel suspension clips located approximately every 4 ft. (supplied by Selux). 3. 9/16 T-bar grid (shown as ref.) 3a. 15/16 T-bar grid (shown as ref.) 4. 1/4-20 Threaded rod to structure (supplied and installed by others). 5. 1/4-20 Coupler hardware (supplied and installed by others) /4-20 Stud (by Selux). 7. Ø5/16 [Ø7mm] mounting hole. A O.A.L. with Flange A1 O.A.L. without Flange T-Bar (TB & TBS) - Dimensions B End Suspensions BB (TB mtg.) Suspension Clips ** C (Ref.) Mid. Suspension D Feed Location E Grid Spacing Feet/Inch MM Feet/Inch MM Feet/Inch MM Quantity Feet/Inch MM Feet/Inch MM Feet *02 (2 ft.) 1' /16" 605 1' /16" / x 1' - 2" 355 0' - 1 1/8" 29 2 Center to Center *04 (4 ft.) 3' /16" ' /16" ' - 6 1/8" 156 6x 2' /4" 882 0' - 2 1/8" 54 4 Center to Center *05 (5 ft.) 4' /16" ' /16" ' - 6 1/8" 156 6x 3' /4" ' - 2 1/8" 54 5 Center to Center *06 (6 ft.) 5' /8" ' - 11" ' - 6 1/8" 156 6x 4' /4" ' - 2 1/8" 54 6 Center to Center *08 (8 ft.) 7' /16" ' /16" ' - 6 1/8" 156 8x 6' /16" ' - 2 1/8" 54 8 Center to Center *For other lengths consult factory **Dimension(s) rounded to the nearest 1/16 with a ± 1/16 (1mm) tolerance. Page 4 of 7

5 Rotating Crossbar Mounting (RC) Rotating Crossbars (RC) (1/4 to 2 thick ceiling) 1. Rotating Crossbar intended for inaccessible ceilings, adjustable for ceiling thickness of 1/4 to 2. A O.A.L. with Flange Rotating Crossbar (RC) - Dimensions A1 O.A.L. without Flange B End Suspensions ** C (Ref.) Mid. Suspension D Feed Location Feet/Inch MM Feet/Inch MM Feet/Inch MM Feet/Inch MM Feet/Inch MM 02 (2 ft.) 2' - 1 1/8" 638 2' - 1/4" /2" 114 1' - 3 1/4" /8" (4 ft.) 4' - 1 1/8" ' - 1/4" ' - 6 1/8" 156 3' 914 0' - 2 1/8" (6 ft.) 5' /2" ' /8" ' - 6 1/8" 156 4' /8" ' - 2 1/8" (8 ft.) 8' - 1 1/16" ' - 1/4" ' - 6 1/8" 156 7' ' - 2 1/8" 54 **Dimension(s) rounded to the nearest 1/16 with a ± 1/16 (1mm) tolerance. Page 5 of 7

6 Drivers: 0-10V linear dimming (DIM) Luminaires supplied with drivers offering the capability of either normal switched operation or 0-10V dimming for linear dimming curve. Fixtures ship wired for dimming. For on/off functionality, simply cap the dimming leads. Minimum dimming level preset at factory to 1%. eldoled SOLOdrive 0-10V linear dimming (DM) Luminaires supplied with SOLOdrive 0-10V dimming driver for linear dimming curve. Minimum dimming level preset at factory to 1%. eldoled SOLOdrive 0-10V logarithmic dimming (DML) Luminaires supplied with SOLOdrive 0-10V dimming driver for logarithmic dimming curve. Minimum dimming level preset at factory to 1%. LUTRON 3-wire dimming (DC3) Luminaires supplied with Hi-Lume 3-wire dimming driver programmed for Constant Current Reduction (CCR). Minimum dimming level down to 1%. Inrush current per driver <2A. LUTRON Ecosystem dimming (DCE) Luminaires supplied with Hi-Lume EcoSystem (4 wire, digital link) dimming driver programmed for Constant Current Reduction (CCR). Minimum dimming level down to 1%. * For control recommendations and system layout for Lutron drivers, please contact Lutron. * For control recommendations for eldoled drivers, please consult eldoled. Driver Quantity 2 ft. 4 ft. 6 ft. 8 ft. RUN DIM, DM and DML Approximately 1 driver per 4 ft. DC3, & DCE drivers Consult Factory *For inrush and control current, please refer to the driver manufacturers spec sheets. Wiring Diagrams 0-10V linear (DIM) 0-10V linear eldoled SOLOdrive (DM) 0-10V logarithmic eldoled SOLOdrive (DML) DIM, DM & DML standard Page 6 of 7

7 Flex Whip - standard for recessed fixtures Joiner System - standard for Runs Fixture extrusion 90 Elbow on top of the housing (7/8" feed hole) 3/8" flexible metal conduit (6' long) Fixture extrusion Recommended #2 Phillips drive Joiner extrusion 6" leads Straight fitting Additional view Photometry LW Optics / 34W LED / 4000K CCT Link to photometry (IES & PDF files) Catalog #: L60-1B35-40-LW-X-04-XX-UNV Report #: Delievered Lumens: 2510 Input Watts: W Efficacy: 73 Power Factor: Total Harmonic Distortion: 5.39 CCT: 3926K CRI: 84.1 Max Candela: from Vertical Spacing Criterion (0-180): 1.28 Spacing Criterion (90-270): 1.28 Spacing Criterion (Diagonal): 1.40 Maximum Candela = Located At Horizontal Angle = 90, Vertical Angle =.5 # 1 - Vertical Plane Through Horizontal Angles (90-270) # 2 - Vertical Plane Through Horizontal Angles (0-180) 1 2 Page 7 of 7