Machine Specification
|
|
- Amberlynn Harmon
- 5 years ago
- Views:
Transcription
1 Machine Specification Machine Type: 1220A
2 Table of Contents 1220A Sandwich panel Machine Specification Electrical Specification
3 1220A SANDWICH PANEL MACHINE SPECIFICATION Automatic Adhesive Application System type 1220A for two-component polyurethane adhesive. The machine is designed as a spreader beam with a reciprocating spreader applying adhesive across a lay-up table. As the spreader is reciprocating over the lay-up table in the Y direction, the whole set-up is moving in the X-direction and thus creating a diamond pattern. Picture of diamond pattern. The application width can be adjusted step less from 500mm to 1400mm. The traverse Y-axis speed can be selected from the operator panel. The maximum traverse speed is 1,5m/sec. The bonding speed is adjusted in accordance with the Y-axis speed in order to obtain exact coverage of the adhesive layer. The bonding speed is depending on the actual oscillating time for the individual panel width; however the maximum X-axis speed is 10m/min. The control system is based on PLC-servo technology and the control of the machine is performed through an operator panel with graphic display. Configuration of essential machine parameters can be done from the HMI. The coat weight is controlled by a flow-controller measuring the adhesive flow with flow meters. By calculating the amount of adhesive per second and comparing with the set point value, the output to the adhesive pump is controlled and adjusted in order to achieve the desired coat weight. The datum line for the adhesive applicator is fixed. The skins are placed on the table and aligned in accordance herewith. The optimal application speed is determined from the spreader width, the desired speed and the acceptable waste at panel ends. The Y-axis speed can be increased within the limitation of the pump capacity and the maximum conveyor speed. The recommended spreader width is 500mm and the corresponding X-axis speed is 10m/min. Max adhesive capacity is approx. 5.0 kg/min. giving a maximum coat weight of up to 300g/m 2 with an X-axis speed of 10m/min. It is recommended to using an adhesive spreader of 200mm application width, but other spreaders can also be used.
4 The System consists of the following: A. Drive unit. Chassis in mild steel and powder coated. To allow variations in panel thickness there is automatic step less vertical adjustment of the spreader up to 200mm. Cable reels for electrical cables and air supply hose in X & Y direction. B. Adhesive system The base is supplied from fluid bags. The fluid bags are placed on a stand; where pneumatic driven transport pumps are mounted. It pumps base to the accumulator tank. The curing agent is supplied in drums. The drum is placed next to the fluid bag stand; the pneumatic driven pump is placed into the drum. It pumps curing agent to the curing agent accumulator tank. The buffer tanks are equipped with level sensors. During filling of the tanks, the level sensors automatically switch of filling pumps when maximum level is reached. The level sensors register and send an alarm, if the level is at minimum or lower. The main pumps are rotor pumps. The mixing ratio and flow are controlled by flow meters. Base and curing agent is pumped separately to the static mixer and spreader, in the right ratio and quantity. The spreader is equipped with an adhesive mixing unit with a static mixer. The static mixer mixes the two components to a homogeneous mass. The spreader ensures a uniform application of the adhesive. C. Cleaning / flushing system The cleaning system is automatic. It consists of a purge tray and a wash tray. When cleaning of the mixer and spreader are required, the spreader moves to the purge tray. There compressed air presses the main part of the mixed adhesive into the purge tray. After that the spreader moves to the wash tray and cleaner is circulated through the mixer and spreader. After a pre-set time the cleaner circulation stops and compressed air is blowing the rest of the cleaner out of the system. The spreader moves back over the purge tray and is ready for bonding. D. Pneumatic system. For transport pump drives, air motor, adhesive valves and fluid bag stretcher. Technical Data: Pump capacity : 5.0 Kg/min. Application speed : At a machine speed of 10 m/min (X-axis) and a application speed of 1,5m/sec (Y-axis) using a 200mm spreader, the application time of a panel with the dimensions of x 6,524m is less than 60 sec. Application time calculation. 6,524m / 0,200m = 32,62 x 2 = 65,24 + 2,76 = 68cycle 68c x 1.215m = 82,62m / 1,5m/s = 55,08sec
5 Coat weight adjustable Coat weight tolerance : : From 100 to 300 g/m 2 ± 1% Average Air pressure required : Peak 800 litre/min. at 6 bar Mixing ratio : 100:25 Vol. Adjustable Spreader width : 200mm
6 ELECTRICAL SPECIFICATION Local control system based on a PLC system, with an operator panel to display the selected application layer, panel size and coat weight. Further a Recipe system and templates for machine configuration settings are available. The control system can handle panels with up to 10 layers, with following data (example) Panel size (mm) Layer X: 6524 Order no: No of layers: 2 Y: 1215 Recipe name: ABCDEFG Actual layer: 1 Coat weight Frame X1 Frame X2 Frame Y1 Frame Y2 (g/m²) (mm) (mm) (mm) (mm) Thickness (mm) The coat weight is controlled by measuring the volumetric displacement of the base pump with a rotary pulse counter. By calculating the amount of base and comparing with the set point value, the rotation speed of the pumps is controlled and adjusted by a frequency converter in order to achieve the desired coat weight. The frame dimension (X1, X2, Y1 and Y2) is the distance from the panel outer edge to the adhesive application area in order to avoid adhesive to be pressed out of the panel when under pressure. The Recipe system is integrated in the operator panel, and gives possibility to store essential production data such as panel size, coat weight and number of layers as a unique recipe number. The recipe feature facilitates repetitive production of panels with the same physical properties. The recipes can be created from the operator panel. The Data logger is integrated in the operator panel and operates as a batch orientated data logger system that store information such as production date/time, Start time, Open time, panel size, coat weight (Set point/actual) and Batch number on a removable flash-ram (CF Card). The data will be stored in CSV format (Comma Separated Values). The flash-ram can be read from a normal pc with a standard flash card reader, and the data accessed through a spreadsheet or database programme such as MS Excel or MS Access. Manual panel targeting system and jog function are available by means of a joy-stick for the manual movement of the machine and another joy stick for the up and down movement of the spreader. The complete system is in conformity with the Machine Directive 89/392, EN and EN The Vetacs adhesive application machine type 1220AG has a control panel which contains PLC, Motor control unit and Operator interface for local operation (Preparation of mechanical calibration etc.). The machine needs a dedicated electrical group and supply connection, only this machine will use. The group should not have a conventional earth-leakage circuit breakers (e.l.c.bs) installed, since the machine is installed with EMC-filters and AC/DC-conversion on servo and inverter drives. These drives filters/drives leak current to ground and can therefore cancel the protective function of the relay OR trigger the relay. A Universal-current sensitive e.l.c.bs. (>=300mA) can be used. The electrical group should be fused with 16A fuse or similar.
7 Supply specification: - Power supply min.: 3x400V ±5%, 50 Hz + PE - Consumption max.: ~12 A - Recommended fuses: 16 A - Ikmax: 10 ka Hardware documentation: Will be supplied in paper version only (2 off) and CD-Rom, with the following documents: - Instrumentation diagram language: English - Operator instruction language: Local - Circuit diagram language: English - Parts lists/spare parts list language: English (Electrical and mechanical) - Lay-out/Location drawing language: English Vetacs supplies all internal cabling between our units, and all systems are tested prior to shipment.
GRANULES AGGLOMERATE PRODUCTION PLANT
MAGMA MACCHINE srl OFFER FOR: MR C02 GRANULES AGGLOMERATE PRODUCTION PLANT INCLUDED OF: Support plant structure Dosing and pouring system for prepolymer Activation system for adhesive with water Mixer
More informationLease Automatic Custody Transfer
Lease Automatic Custody Transfer Angus Manufactured LACT Units Updated 19-Dec-01, Slide 2 LACT Unit Requirements Are used for the automatic unattended measurement of crude oil. Accurately measure the quantity
More informationSolidFlow. Monitoring of Solids. Product Information. SWR engineering Messtechnik GmbH
EN SolidFlow Product Information Monitoring of Solids SWR engineering Messtechnik GmbH Using SolidFlow is a sensor especially developed for measuring the flow rate of solids conveyed in metallic ducts.
More informationUSED Year 2006 Homag DET (Homag FL 20/07/25) for Sizing and Contour Shaping of Solid Wood Doors
TECHNICAL SPECIFICATIONS MS 96217 PAGE 1 USED Year 2006 Homag DET (Homag FL 20/07/25) for Sizing and Contour Shaping of Solid Wood Doors The Homag/Torwegge base construction features many technological
More informationAUTOMATIC VOLUMETRIC FILLING MACHINE, FILLING RANGE 250ml TO 5 Ltrs. & 5 Ltrs. To 20 Ltrs..
An ISO 9001 : 2008 UNITECH AUTOMATIC VOLUMETRIC FILLING MACHINE, FILLING RANGE 250ml TO 5 Ltrs. & 5 Ltrs. To 20 Ltrs.. Drip free nozzles with filling range of 250ml to 5000ml/5Ltrs. to 20 Ltrs. with drip
More informationOperating Instructions Type MPT 53
Operating Instructions www.turnstiles.us Type MPT 53 Contents 1. Delivery... 2 2. Safety...3-4 3 Description and operation... 5 4. Technical Data 6 5. oundation...6-9 6. Assembly and installation...10-13
More informationRAPIDMIX 400CW. Length of Machine (19.5m) Length when erected Width of Machine 9-10 (3.00 m) Width Same
Machinery Manufacturers to the Concrete Industry RAPIDMIX 400CW The Rapidmix 400CW has been designed to be totally mobile and completely self-contained with its own power source. It is also completely
More informationw w w. j y o t i. c o. i n Performance Series Vertical Machining Center
w w w. j y o t i. c o. i n Performance Series Vertical Machining Center Performance Series Vertical Machining Center Overview To match the demand of greater accuracy and total reliability at higher speeds
More informationOperating Instructions Pedestrian Turnstile Type MPT 33
Operating Instructions Pedestrian Turnstile Type MPT 33 Contents 1. Delivery...2 2. Safety...2 3 Description and operation...3 4. Foundation...4-5 5. Assembly and installation...6-9 6. Electrical connection...10-11
More informationPositive displacement batch controller
8075 Batch controller Positive displacement batch controller Type 8075 can be combined with... Compact version for DN15 to DN100 Dosing On site calibration by Teach-In Check of input/output signals Total
More informationBARON-MAX V Range Vertical Machining Centers Powerful Machines, Simple User Friendly Programming At a Very Affordable Pricing
BARON-MAX V Range Vertical Machining Centers Powerful Machines, Simple User Friendly Programming At a Very Affordable Pricing Cost Effective, High Performance Vertical Machining Centers BARON-MAX V Range
More informationProSeries NEMA 4X SONIC-PRO. Engineering and Technical Data. Transit Time Ultrasonic Flowmeter. Industries, Ltd. s Ultrasonic Flow Meters
ProSeries by Blue-White Industries, Ind. Ltd. Industries, Ltd. s SNIC-PR s SNIC-PR s S4 Transit Time Ultrasonic Flowmeter ½ thru 2 diameter Pipe Sizes Inline spool piece Advanced communications Data logging
More informationTechnical Datasheet. Compact DC Energy Meter. Multi-Function DC Energy Meter
Preliminary Datasheet Technical Datasheet Compact DC Energy Meter RISH EM DC series is specially designed to measure, display and communicate DC Voltage, Current, Power and Energy to monitor and control
More informationServo-Torq Rim block cutter With integral roller in-feed & exit conveyor belt
Servo-Torq Rim block cutter With integral roller in-feed & exit conveyor belt The Servo-Torq Rim block cutters are ideal for use in-line after the plodder extruder. They can handle single, twin or even
More informationCENTRIFLOW METER and ELECTRONICS WIRING and INSTALLATION MANUAL REV 01/16 ORIGINAL LANGUAGE Copyright 2016 Eastern Instrument Laboratories, Inc. All Rights Reserved. TABLE OF CONTENTS SAFETY Safe Operation...
More informationInsulating Glass machines
Insulating Glass machines Vertical Insulating Glass Production Line LBZ2500PY Features and specialties: PLC control system with whole process, touch-sensitive screen and man-machine interface. Realize
More informationDiscrete Control Logic. 1. Pneumatic circuits. - Low forces - Discrete, fixed travel distances - Rotational or reciprocating motion
Discrete Control Logic 1. Pneumatic circuits - Low forces - Discrete, fixed travel distances - Rotational or reciprocating motion Main components: compressor, valves, cylinders Pneumatic components: cylinders
More informationCross Flow Heat Exchanger H352
Cross Flow Heat Exchanger H352 H352 Shown With Optional Plain Tube of H352A fitted. Allows Investigation Of Plain And Finned Cross Flow Heat Exchangers. Expandable Free & Forced Convection Heat Transfer
More informationRAW CASHEW NUT CLEANING AND CALIBRATION SYSTEM
RAW CASHEW NUT CLEANING AND CALIBRATION SYSTEM This system has been designed for the raw cashew nuts cleaning and calibration, conceived to obtain an homogeneous quantity of product of the same grade that
More informationOn Demand, Differential Pressure Controls
On Demand, Differential Pressure Controls 20 Series Pulse Controller The Goyen 20 Series Pulse Controller is an advanced microprocessor controller of the cleaning system in reverse pulse filters in pneumatic
More informationFabrication and Automation of Solvent less Packaging Machine
Fabrication and Automation of Solvent less Packaging Machine Masood Nazir*, Prof Rashmi Ranjan Das# * M.tech Student at School of Electrical Engineering, VIT University Vellore, Tamilnadu-632014 India
More informationCross Flow Heat Exchanger H352
Cross Flow Heat Exchanger H352 H352 Cross Flow Heat Exchanger Shown With Optional Plain Tube of H352A fitted. Allows Investigation Of Plain And Finned Cross Flow Heat Exchangers. Expandable Free & Forced
More informationGraco PD44. Patented Meter, Mix and Dispense Valve for Two-Component Micro Dispensing
Graco PD44 Patented Meter, Mix and Dispense Valve for Two-Component Micro Dispensing Graco PD44 Valve for Precise Micro-Dispensing 1.0cc 0.50cc 0.25cc 0.1cc 0.005cc 1/16" Dia. 1/8" Dia. 3/16" Dia. 1/4"
More informationA- Compact. High Pressure Metering Machines for Polyurethanes. Automotive Interiors & Exteriors. Refrigerator Insulation.
A- Compact High Pressure Metering Machines for Polyurethanes Automotive Interiors & Exteriors Refrigerator Insulation Panel Insulation Rigid, Flexible & Integral Foams for Furniture Building & Piping Insulation
More information1 of 12. L & A Feeder Engineering. Vibrator With In-line Feeder And Hopper. Polyurethane Coating Bowl
L & A Feeder Engineering Vibrator With In-line Feeder And Hopper Polyurethane Coating Bowl Feeding Polyurethane Coating Bowl Bowl Module Bowl material: SUS304 /SUS316 Internal Finishing: PU coating(blue(
More informationTROUBLESHOOTING TP. Index
TROUBLESHOOTING TP Index E1 POWER CUT DETECTED... 2 E2 LOCK ERROR... 3 E3 DRAINAGE FAILURE / WATER IN TUB... 6 E4 MAXIMUM WATER LEVEL REACHED... 6 E5 FAULT WATER INLET... 6 E6 HEATING FAULT... 6 E7 MAXIMUM
More informationTRANSDUCERS. Conversion of Measured Strain or Output Voltage into Physical Quantity. Sensitivity Decrease due to Cable Extension
2-2 Strain gage transducers are designed to transduce physical variables such as load, force, pressure, acceleration, vibration, displacement and torque into electric signals by using strain gages as sensing
More information1291BL Series Technical Specification Single Axis Position and Rate Table System
Datasheet 1291BL Series Technical Specification Single Axis Position and Rate Table System DESCRIPTION The Model 1291BL Single Axis Position and Rate Table System is designed to provide precise position,
More informationCenters. power and. accuracy. 12/16 KW 24 tools Double arm. High quality surface finishing. to 12,000 rpm. tools ATC Magazine
BARON-MA AX VL Range Vertical Machining Centers Linear Guide ways VL Rangee Powerful Machines, Simple User Friendly Programming Att a Very Affordable Pricing Cost Effective, High Performance Vertical Machining
More informationCENTRIFEEDER ELECTRONICS
CENTRIFEEDER ELECTRONICS FOR USE WITH CENTRIFEEDER with Integrated Vibratory Control REV 08/13 ADDENDUM VERSION 6.22 SOFTWARE Copyright 2011 Eastern Instrument Laboratories, Inc. All Rights Reserved. TABLE
More informationProduct information. MIRA-P Poultry computer
Product information Hotraco Agri BV Stationsstraat 142 5963 AC Hegelsom, The Netherlands Tel +31 (0)77 3275020 Fax +31 (0)77 3275021 info@hotraco.com www.hotraco.com MIRA-P Poultry computer Poultry computer
More informationMeter Mix Dispense Systems
TM Manufacturers of Precision Dispense Systems & Valves Meter Mix Dispense Systems For Bonding, Sealing, Potting, Casting, Encapsulation, Gasketing and Much More www.sealantequipment.com Sealant Equipment
More informationThe Original Open Center Ring Indexer
The Original Open Center Ring Indexer We manufacture high-precision aluminum and steel plates (anodize and nickelplated upon request). All of your equipment can be supplied from one source including an
More informationProportional pressure relief valve, directly operated, without/with integrated electronics (OBE)
Proportional pressure relief valve, directly operated, without/with integrated electronics (OBE) ype DBE and DBEE RE 96 Edition: 03-06 Replaces: 04.3 Size 6 Component series 6X Maximum operating pressure
More informationTechnical Datasheet. Multi-channel support RTC with Data Storage RS485 Output Alarming & Protection Onsite Programmable Load Profile Analysis
Preliminary Datasheet Technical Datasheet Compact DC Energy Meter RISH EM DC series is specially designed to measure, display and communicate DC Voltage, Current, Power and Energy to monitor and control
More informationJTEKT Toyoda Americas Corporation
JTEKT Toyoda Americas Corporation 316 W. University Drive, Arlington Heights, IL 60004 Toll Free: 800-257-2985 Main: 847-253-0340 Fax: 847-253-0540 www.toyoda.com JTEKT Toyoda Americas Corporation Designed
More informationSPECIFICATIONS UPS Triple Output 13.6VDC/213W, 48VDC/153W, 48VDC/39W
Page 1 / 7 Full operation without need of battery Two independent 48Vdc outputs for switching and control Local monitoring with 8 LEDs Remote monitoring with 4 alarm relays Monitoring and configuration
More informationThe DPQ Series 2X Digital Injection Process Controller
Electric Drives and Controls Linear Motion and Assembly Technologies Pneumatics Service The DPQ Series 2X Digital Injection Process Controller The Drive & Control Company 1 The Injection Process Perfect
More informationThe DPC Digital Clamp Controller
Electric Drives and Controls Linear Motion and Assembly Technologies Pneumatics Service The DPC Digital Clamp Controller The Drive & Control Company 1 Clamping Units Moving Large Masses Smoothly with Speed
More informationLogic module. Brief description. Features. Block structure. Data Sheet Page 1/5
M. K. Juchheim GmbH & Co UK USA Jumo Instrument Co. Ltd. Jumo Process Control Inc. 36035 Fulda, Germany Temple Bank, Riverway 735 Fox Chase Phone (0661) 6003-0 Harlow, Essex CM20 2TT Coatesville, PA 19320
More informationFVC2100/2200 TEK-AIR TECHNICAL PRODUCT DATA SHEET FUME HOOD FACE VELOCITY MONITOR AND CONTROLLER. Application. General Description
TEK-AIR TECHNICAL PRODUCT DATA SHEET FVC2100/2200 FUME HOOD FACE VELOCITY MONITOR AND CONTROLLER MODEL 2100: Constant face velocity, variable volume MODEL 2200: Constant face velocity, variable volume
More informationTOWER MAXI T SINGLE CONVERSION ON LINE UPS SYSTEMS
INSTRUCTION MANUAL TOWER MAXI T SINGLE CONVERSION ON LINE UPS SYSTEMS September 2000 TOWER UPS DISTRIBUTION (PTY) LTD 1 1. INTRODUCTION T A B L E O F C O N T E N T S 1.1 General Description... 3 1.2 Features...
More informationSECTIONAL WARPING MACHINE SERVOMECH-100
SPECIFICATIONS SECTIONAL WARPING MACHINE SERVOMECH-100 1.0 TECHNICAL SPECIFICATIONS: WORKING WIDTH : 2200mm to 3600 mm DRUM TYPE : Metallic Drum, Dynamically Balanced DRUM CONE HEIGHT : Fixed - 11 0 or
More informationECONOMISER SERIES E2T USER MANUAL
TURBO S.R.L. Electronic Control Systems for Dust Collectors e-mail: info@turbocontrols.it web: www.turbocontrols.it TEL. ++39 (0)362 574024 FAX ++39 (0)362 574092 ECONOMISER SERIES E2T USER MANUAL 24/06/2014
More informationsolventless, solvent-based & monocomponent mixers and metering units for lamination
solventless, solvent-based & monocomponent mixers and metering units for lamination lamination : a simple process? critical elements in the process raw materials for lamination control on the adhesion
More informationSputter System. SPS-R2R series. ULTECH Co., Ltd.
Sputter System SPS-R2R series Introduction System Picture (reference) Process 1) Application : 2) Sputtering material : TCO (ITO,AZO,ZnO), Metal 3) Film width : max. 100mm 4) Film length : max. 100M 4)
More informationQuick guide. Plug-in fans GPPM with FC101_106 August 2014
Quick guide Plug-in fans GPPM with FC101_106 August 2014 Fläkt Woods permanent magnet motors and speed controllers for plug fans GPPM 1. General Fläkt Woods offers a wide range of permanent magnet motors
More informationTechnical Data Sheet. Uninterruptible Power Supply. Critical Power. imagination at work
Technical Data Sheet Uninterruptible Power Supply TM SG Series 100 &120 PurePulse TM SG Series 60 & 80 PurePulse SGSE_060-120_S1_UPS_GE_01 GE Consumer & Industrial SA General Electric Company CH 6595 Riazzino
More informationThe MiniMax conveyor car wash represents a breakthrough in car washing. The MiniMax
The MiniMax conveyor car wash represents a breakthrough in car washing. The MiniMax delivers: 1. A wash quality comparable to high end gantry machines; 2. At a cheaper price; 3. Washing up to 3 times as
More informationAVL PLU 131U FLOW METER
CONSUMPTION MEASUREMENT TECHNOLOGIES AVL PLU 131U FLOW METER AVL PLU131 UREA FLOW MEASUREMENT SENSORS Function Summary The AVL PLU 131U-020 Flow Sensor has been designed for transient flow rate measurement
More informationRAPIDMIX 600C CHASSIS
Machinery Manufacturers to the Concrete Industry RAPIDMIX 600C The Rapid Mix 600C has been designed to be totally mobile and completely self-contained with its own power source. It is also completely self
More informationGLUEMIX. The true compact dosing installations for plural component glues, sealants and casting compounds!
GLUEMIX The true compact dosing installations for plural component glues, sealants and casting compounds! STATE OF THE ART Wiltec has specially developed the state-of-the-art GlueMix product range to facilitate
More informationAlpha EM DC Multi-Function DC Energy Meter. Technical Datasheet. Compact DC Energy Meter
Alpha EM DC Technical Datasheet Compact DC Energy Meter ALPHA EM DC series is specially designed to measure, display and communicate DC Voltage, Current, Power and Energy to monitor and control the target
More informationTechnical Data Sheets
GE Digital Energy Power Quality Technical Data Sheets Digital Energy Uninterruptible Power Supply LP 33 Series 10 20 30 40 kva 400 Vac CE Series 5 GE Consumer & Industrial SA General Electric Company CH
More informationFully Automated Standard Dispensers
Fully Automated Standard Dispensers Dispense Solutions Multi-Formula, Many Ingredient Dispenser This type of Dispenser involves complex formulations which are typical of Paint Formulation, Paint Tinting,
More informationTechnical Data Sheet. Uninterruptible Power Supply. Critical Power. imagination at work
Technical Data Sheet Uninterruptible Power Supply LPS33_010-020_S6_UPS floor_ge_01 GE Consumer & Industrial SA General Electric Company imagination at work QUITO: Elia Liut N45-26 y Edmundo Chiriboga Telf:
More informationLED Driver Compact fixed output
Driver LC 45W 500 1400mA flexc SC EXC EXCITE series Product description Constant current LED Driver Dimmable via ready2mains Gateway Dimming range 15 100 % (Depending on load. For details refer to chapter
More informationLED Driver Compact fixed output
Driver LC 25W 350 1050mA flexc SC EXC EXCITE series Product description Constant current LED Driver Dimmable via ready2mains Gateway Dimming range 15 100 % (Depending on load. For details refer to chapter
More informationTechnical Data Sheets
GE Consumer & Industrial Power Protection Technical Data Sheets Digital Energy Uninterruptible Power Supply LP 33 Series / 10 20 30 kva 400 VAC CE Series 4 SGT4000_010-020-030 GE_01 Manufactured by: GE
More informationUpgrade your blow molding machine with one of our two new state of the art machine control systems.
Upgrade your blow molding machine with one of our two new state of the art machine control systems. Uniloy is proud to introduce the Allen Bradley Compact Logix, and B&R Control Packages developed for
More informationTechnical Data Sheets
GE Consumer & Industrial Power Protection Technical Data Sheets Digital Energy Uninterruptible Power Supply SitePro 150 200 250 300 kva 400 VAC CE Series 6 Manufactured by: GE Digital Energy General Electric
More information1291BL Series Technical Specification Single-Axis Rate and Positioning Table System
Datasheet 1291BL Series Technical Specification Single-Axis Rate and Positioning Table System DESCRIPTION The Model 1291BL Single Axis Positioning and Rate Table System is designed to provide precise position,
More informationS. Jabez Dhinagar Ph.D Vice President. TVS Motor Company Ltd. 21 st November 2008, NI Bangalore
S. Jabez Dhinagar Ph.D Vice President Advanced Engineering TVS Motor Company Ltd. 21 st November 2008, NI Bangalore CONTROL SYSTEM DEVELOPMENT CYCLE System Definition System Testing Rapid Prototyping Hardware
More informationSINUS PENTA 2T/4T SINUS PENTA 2T/4T
SINUS PENTA 2T/4T SINUS PENTA 2T/4T Technical Highlights One product, 5 integrated functions - IFD (Inverter Frequency Drive): vector modulation function for general-purpose applications (V/F pattern).
More informationProfile Spraying Machine, Makor Model IRIDE 206/W (Modified)
TECH SPEC PAGE 1 Profile Spraying Machine, Makor Model IRIDE 206/W (Modified) The spraying machine IRIDE 206 has been designed for the protection of the work environment, and built to satisfy present-day
More informationEM DC Multi-Function DC Energy Meter
Analogue Meters With Moving - Iron Movement EM DC Compact DC Energy Meter Ziegler EM DC series is specially designed to measure, display and communicate DC Voltage, Current, Power and Energy to monitor
More informationTechnical Data Sheets
GE Consumer & Industrial Power Protection Technical Data Sheets Digital Energy Uninterruptible Power Supply SitePro 400 & 500 kva 400 VAC CE Series 6 Manufactured by: GE Digital Energy General Electric
More informationthree different ways, so it is important to be aware of how flow is to be specified
Flow-control valves Flow-control valves include simple s to sophisticated closed-loop electrohydraulic valves that automatically adjust to variations in pressure and temperature. The purpose of flow control
More informationTechnical Data Sheets
Digit al Energy T M L P Seri es Di gi ta l Energy TM LP Series Digita l Energ y T M L P Se rie s GE Consumer & Industrial Power Protection Technical Data Sheets Digital Energy Uninterruptible Power Supply
More informationMC-Balance product information
MC-Balance product information Color in Control Postal address Physical address Phone/Fax E-mail/Internet P.O. Box 3016 8600 DA Sneek Koperslagersstraat 31 8601 WL Sneek Ph: +31 (0) 515 570020 info@movacolor.com
More informationSpecification Approval Sheet
Specification Approval Sheet Name: Tenergy 9V 600mAh Li-ion Rechargeable Battery Model: 30593 SPECS: 9V 600mAh Approved By Jay Wang Checkup Make Yezi Dong Signature Date Customer Confirmation Company Name:
More informationMETERING, MIXING & DISPENSING OF 2-PART MATERIALS
METERING, MIXING & DISPENSING OF 2-PART MATERIALS SYSTEMS & CONSUMABLES METER MIX Systems Ltd METERING, MIXING & DISPENSING OF 2-PART MATERIALS Piston pump metering Precise volumetric fixed ratio metering
More informationUPGRADE YOUR BLOW MOLDING MACHINE WITH ONE OF OUR TWO NEW STATE OF THE ART MACHINE CONTROL SYSTEMS.
UPGRADE YOUR BLOW MOLDING MACHINE WITH ONE OF OUR TWO NEW STATE OF THE ART MACHINE CONTROL SYSTEMS. Uniloy is proud to introduce the Allen Bradley Compact Logix, and B&R Control Packages developed for
More informationDOLI's STANDARD COMPRESSION FLEXOMETER (GOODRICH FLEXOMETER)
Qualitest USA LC, Toll-Free: 1.877.884.TEST, Fax: 954.697.8211, E-mail: info@qualitest-inc.com DOLI's STANDARD COMPRESSION FLEXOMETER (GOODRICH FLEXOMETER) Basic System The measurement is based on ISO
More informationDriver LC 17W mA flexc C EXC EXCITE series
LC 17 W 250 700 flexc C EXC - Tridonic Seite 1 von 5 Home Products LED Drivers Compact fixed output EXCITE series LC 17 W 250 700 flexc C EXC Driver LC 17W 250 700 flexc C EXC EXCITE series Product description
More informationKMH KMH500/630/800 HORIZONTAL MACHINING CENTERS
KMH KMH5/63/8 HORIZONTAL MACHINING CENTERS Index Cover 1 Cover Contents 2-3 Table of Contents Structure 4-5 Design & Rigidity 6 3 Axis Transmission 7 Ballscrew Cooling System 8-9 ATC Unit Maintenance &
More informationMANUAL ABOVE GROUND TANK FOR INSITE STORAGE OF ADBLUE WITH PUMP
MANUAL ABOVE GROUND TANK FOR INSITE STORAGE OF ADBLUE WITH PUMP Content 1) Introduction 3 2) Product overview 3 2.1) Standard equipment 3 2.2) Possible options 3 3) Transport and installation 3 3.1) Transport
More informationLED Driver Linear / area dimming industry. Driver LC 150W mA IND sl EXC EXCITE series
Driver LC 150W 200 1050mA IND sl EXC EXCITE series Product description Constant current built-in Driver for LED, particularly suitable for industrial applications in tough environments such as cold warehouses
More informationHYDRUS ULTRASONIC METER
APPLICATION Static ultrasonic water meter for accurate measuring and recording for all applications of water supply. FEATURES 4 Real data communication, open metering telegram 4 Long-term stability under
More informationAnalog input module. Brief description. Page 1/8. Data Sheet
JUMO GmbH & Co. KG Delivery address:mackenrodtstraße 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 e-mail: mail@jumo.net Internet: www.jumo.net
More informationAccurate measurement of compressed air consumption and detection of leaks. Measuring the individual consumption per customer / cost centre
Inline Flowmeter for compressed air and gases DN15 - DN50 / 16 bar The flow meter of the series, based on the measurement principle of thermal mass flow, is ideally suited for the measurement of flow of
More informationSALES PRESENTATION FOR RELAYS, CONTACTORS & MOTOR STARTER TESTING EQUIPMENTS
SALES PRESENTATION FOR RELAYS, CONTACTORS & MOTOR STARTER TESTING EQUIPMENTS Relay Test Bench: LIST OF TEST EQUIPMENT 1. FIVE STATION BIMETAL OVERLOAD RELAY TEST BENCH 2. TWENTY FOUR STATION RELAY HEATING
More informationMicro Dyne Motor Testing System
Data Sheet Motor Testing System Features designed specifically for miniature and micro s Torque: Easily convertible from 2.0 mn m to 4.0 mn m (0.28 oz in to 0.57 oz in) Speed: up to 100,000 rpm Power:
More informationsinamics SINAMICS G110 Variable Speed Drives 0.12 kw to 3 kw SINAMICS G110 Short Form 2004
Variable Speed Drives 0.12 kw to 3 kw Short Form 2004 sinamics SINAMICS Variable Speed Drives 0.12kW to 3kW Product Information Pricing The is a Variable Speed Drive with basic functions for a variety
More informationHC1, HC2 and HC9. Helmholtz Coil Systems
HC1, HC2 and HC9 Helmholtz Coil Systems Helmholtz Coil Systems HC1, HC2 & HC9 Helmholtz Coil Systems These Helmholtz Coils are used in the calibration of magnetic field sensors, or for conducting any test
More informationTon-Tel Multi-Deck Weighbridge
Weighbridge Rugged construction, Accurate weights Weightel digital load cells from 6 tonnes to 30 tonnes capacity OIML Approved Plug-And-Weigh Proven reliability Weightel digital load cells for maximum
More informationSKF Grease injection system
1-4101-EN SKF Grease injection system Grease injecting lubrication system type GVP for moving conveyor chain pins and rollers The grease injecting lubrication system GVP has been developed to carry out
More informationVFC-5 to VFC-500 FLO-COATER
VFC-5 to VFC-500 FLO-COATER OPERATION INSTRUCTIONS Page -1- CONTENTS PAGE NUMBER System Description... 2 Flo-Coater Description... 4 Operation of a Flo-Coater... 8 Selective Operator Control... 9 Operating
More informationRHEOCHECK MD - Drive. Moving Die Rheometer controlled by Personal Computer.
RHEOCHECK MD - Drive Moving Die Rheometer controlled by Personal Computer. RHEOCHECK MD - Drive Moving Die Rheometer controlled by Personal Computer. Overview The Rheocheck MD - Drive measures the cure
More informationForeword
Foreword Content 1. Summary 2. Safety instruction Safety Symbol Indication Attention Static discharge sensitive Electric shock Dangerous Indicate risk of serious injury or death or seriously damage the
More informationTechnologies & Products Press Conference LeaXield Active filter for leakage current minimization
Technologies & Products Press Conference 2014 LeaXield Active filter for leakage current minimization Andrew Tucker Automotive & Power Conversion Solutions Magnetics Business Group November 12, 2014 Leakage
More informationDycon D1532SM. EN50131/PD6662 Grade 3, 12V 2A Power Supply. Technical Description Installation and Operating Manual DYCON POWER SOLUTIONS LTD
Dycon D1532SM EN50131/PD6662 Grade 3, 12V 2A Power Supply Technical Description Installation and Operating Manual DYCON POWER SOLUTIONS LTD Tel: +44 (0)1443 471 900 Unit A Cwm Cynon Business Park Mountain
More informationMETER MIX DISPENSE eldomix 100 / 600
METER MIX DISPENSE eldomix 100 / 600 FOR THE PROCESSING OF LOW TO HIGH VISCOSITY MATERIALS High process security Application areas Industries Coating Encapsulating These modern metering systems can be
More informationUFM 800 W, C and UFM 800 W Hot Tapping. Ultrasonic flowmeters. for water and wastewater
KROHNE 12/2006 7.02343.22.00 MAR UFM 800 W, C and UFM 800 W Hot Tapping Ultrasonic flowmeter for water and wastewater...with weld-in sensors for metal pipelines...with built-on or built-in sensors for
More informationVERTICAL FORM FILL SEAL MACHINES
VERTICAL FORM FILL SEAL MACHINES AUTOMATIC PACKAGING MACHINES 2 Vertical Form, Fill and Seal machines AVM AVM vertical Form, Fill and Seal (VFFS) machines automatically form a bag from a flat roll of film,
More informationTechnical Data Sheet. Uninterruptible Power Supply. Digital Energy. imagination at work
Digital Energy Technical Data Sheet Uninterruptible Power Supply LPS33_010-020_S6_UPS floor_ge_01 GE Consumer & Industrial SA General Electric Company CH 6595 Riazzino (Locarno) Switzerland T +41 (0)91
More informationMicro Dyne Motor Testing System
Data Sheet Motor Testing System FEATURES DESIGNED SPECIFICALLY for miniature and micro s Torque: Easily convertible from 2.0 mn m to 4.0 mn m (0.28 oz in to 0.57 oz in) Speed: up to 100,000 rpm Power:
More informationINSTALLATION & OPERATION MANUAL
INSTALLATION & OPERATION MANUAL MODEL T575N TEMPERATURE COMPENSATED TOTALIZER/PRINTER DOC#: MN-T575N SPONSLER, INC. Liquid and Gas Flow Measuring Devices and Controls LBS ON OFF TRUCK TOTALIZER MODEL T575N
More informationSide Seal Horizontal Shrink Wrapper
ARPAC 9511 West River Street, Schiller Park, IL 60176 US Phone:847-678-9034 Fax:847-671-70 E-Mail: atillander@arpac.com Web site:www.arpac.com Item # ARPAC TS37, Side Seal Horizontal Shrink Wrapper QUOTE
More informationELECTRIC MACHINES EUROLAB 0.3 kw
index SINGLE-PHASE MOTORS SPLIT-PHASE MOTOR DL 30130 CAPACITOR MOTOR DL 30140 UNIVERSAL MOTOR DL 30150 REPULSION MOTOR DL 30170 THREE PHASE ASYNCHRONOUS MOTORS SQUIRREL CAGE THREE PHASE ASYNCHRONOUS MOTOR
More information