Wato Product Range includes:
|
|
- Aron Fowler
- 5 years ago
- Views:
Transcription
1 europevalves
2 Wato is an innovative engineering and production company that offers products and services for water supply and sewerage systems with distributors in the whole world. With its products and services Wato offers to its customers possibilities for optimization and higher efficiency. The company provides simple and practical solutions that increase the efficiency of water supply systems on all levels, from the water carrier to the final consumer. Wato combines services, products and know-how in a single goal: to maximize reliability and performance of water networks. Wato Product Range includes: europevalves : Wato produces the full range of control and isolating valves and fittings needed for a Water Supply Network. All europevalves products are designed with the ultimate goal to bring high quality at an optimized cost level. TOM Pipes: Wato produces e new generation of PVC-O pipes. TOM PVC-O pipes are the most advanced pipes for the conveyance of high-pressure water currently available on the market, with a number of exceptional features for this kind of application, thanks to the process of molecular orientation. Metering & Control: Wato provides equipment to monitor and study the network such as: flow and pressure sensors; data loggers; AMR equipment and remote control systems to optimize the operation of control valves and other units. Software & Tools: Wato customizes its products to the needs of any network operator. The company has developed simple tools to help in monitoring the network on a daily basis and take the right operational decisions on time. Wato s services include network balancing, meter management, field data capture and asset condition assessment. The company has focused its efforts on two key areas water loss reduction and sustainable development of water infrastructure. Wato provides the following expert solutions in the field of water loss reduction: active pressure management, anti-leakage program and smart metering. We keep ISO 9001 certification by an accredited certification body. We believe this shows our commitment to quality, customers, and a willingness to work towards improving efficiency. We address the balance between maintaining profitability and reducing environmental impact. We do care about keeping the environment clean. We have put in place an effective Environmental Management System (EMS) and we are ISO certified.
3 Contents 3 Gate Valves page 05 Air Valves page 43 Butterfly Valves page 19 Rubber Expansions page 49 Check Valves page 31 Couplings & Fittings page 53 Strainers page 39 Repair Clamps page 65
4 4
5 Gate Valves 5
6 6
7 Section: Gate Valves 7 Resilient Seated Gate Valve/EN558 Series 14/PN16 Non-Rising Stem Model: GV-RS-S-14-H Features Replaceable O-ring according ISO 7259 Low torque operation and abrasion resistance Rubber encapsulated wedge Clockwise closing direction Fusion bonded epoxy coated inside and outside Product color: Blue RAL 5005 or RAL 5017 Maximum temperature 80 C W M8 14,8 6 Technical Specifications Design: EN and 2; EN 1171 Face to Face: EN 558 / ISO base series Flanges:EN PN10/16 Hydraulic test to EN Seat Test Pressure: 17.6 bar Shell Test Pressure: 24 bar Operating torque test Nominal pressure designation PN16 bar H n D2 DN Optional Extras Stem Cap Position Indicator Extension Spindle / T Key L b Item Part Name Material Grade Item Part Name Material Grade 1 Body Ductile iron EN-JS-1050(EN-GJS-500-7) EN Wedge DI+Rubber EN-JS 1050 ( EN-GJS ) EN EPDM /NBR EN Wedge Nut Brass CW602 N (CuZn36Pb2As) EN Dust guard Rubber NBR EN Handwheel Steel S235 JR EN Washer Stainless steel EN ISO Stem Stainless steel ( X20Cr13 ) EN Bolt Stainless steel EN ISO Bonnet Rubber EPDM/NBR EN gasket 6 Bonnet Ductile iron EN-JS 1050 ( EN-GJS ) EN Stuffing nut Brass CW602 N (CuZn36Pb2As) EN O Ring EPDM/NBR EPDM/NBR EN O Ring EPDM/NBR EPDM/NBR EN O Ring EPDM/NBR EPDM/NBR EN Thrust Plastic PA(Nylon) EN ISO 1874 washer 16 Bolt Stainless steel EN ISO 4762 Size L D D1 D2 b n-d H H1 W W.T(kg) DN DN DN DN DN DN DN DN DN DN
8 8 Section: Gate Valves Resilient Seated Gate Valve/EN558 Series 15/PN16 Non-Rising Stem Model: GV-RS-S-15-H Features Replaceable O-ring according ISO 7259 Low torque operation and abrasion resistance Rubber encapsulated wedge Clockwise closing direction Fusion bonded epoxy coated Inside and outside Product color: Blue RAL 5005 or RAL 5017 Maximum temperature 80 C W ,8 M Technical Specifications Design: EN and 2; EN 1171 Face to Face: EN 558 / ISO base series Flanges:EN PN10/16 Hydraulic test to EN Seat Test Pressure: 17.6 bar Shell Test Pressure: 24 bar Operating torque test Nominal pressure designation PN16 bar H D2 DN Optional Extras Stem Cap Position Indicator Extension Spindle / T Key L b Item Part Name Material Grade Item Part Name Material Grade 1 Body Ductile iron EN-JS-1050(EN-GJS-500-7) EN Wedge DI+Rubber EN-JS 1050 ( EN-GJS ) EN EPDM /NBR EN Wedge Nut Brass CW602 N (CuZn36Pb2As) EN Dust guard Rubber NBR EN Handwheel Steel S235 JR EN Washer Stainless steel EN ISO Stem Stainless steel ( X20Cr13 ) EN Bolt Stainless steel EN ISO Bonnet Rubber EPDM/NBR EN gasket 6 Bonnet Ductile iron EN-JS 1050 ( EN-GJS ) EN Stuffing nut Brass CW602 N (CuZn36Pb2As) EN O Ring EPDM/NBR EPDM/NBR EN O Ring EPDM/NBR EPDM/NBR EN O Ring EPDM/NBR EPDM/NBR EN Thrust Plastic PA(Nylon) EN ISO 1874 washer 16 Bolt Stainless steel EN ISO 4762 Size L D D1 D2 b n-d H H1 W W.T(kg) DN DN DN DN DN DN DN DN DN DN
9 Section: Gate Valves 9 Resilient Seated Gate Valve/EN558 Series 14 15/PN16 Non-Rising Stem Model: GV-RSA-S-14-H / GV-RSA-S-15-H Features Replaceable O-ring according ISO 7259 Low torque operation and abrasion resistance Rubber encapsulated wedge Clockwise closing direction Fusion bonded epoxy coated inside and outside Product color: Blue RAL 5005 or RAL 5017 Maximum temperature 80 C Technical Specifications Design: EN and 2; EN 1171 Face to Face: EN 558 / ISO and 15 base series Flanges:EN PN10/16 Hydraulic test to EN Seat Test Pressure: 17.6 bar Shell Test Pressure: 24 bar Operating torque test Nominal pressure designation PN16 bar Top flange in acc. to ISO 5210 B3 DN D2 D n-d L b Item Part Name Material Grade Item Part Name Material Grade 1 Body DI EN-JS 1050 ( EN-GJS ) EN Back Sealing Rubber EPDM/NBR EN O Ring 2 Wedge DI+Rubber EN-JS 1050 ( EN-GJS ) EN EPDM /NBR EN Thrust Washer Plastic PA (Nylon) EN ISO Wedge Nut Brass CW602 N (CuZn36Pb2As) EN Stem Collar Stainless steel (X20Cr13 ) EN Brass CW614 N (CuZn39Pb3) EN Stem Stainless steel ( X20Cr13 ) EN O-Ring Rubber EPDM/NBR EN Bonnet Gasket Rubber EPDM/NBR EN Gland Flange DI EN-JS 1050 ( EN-GJS ) EN Bonnet DI EN-JS 1050 ( EN-GJS ) EN Dust Guard Rubber NBR EN Size L D D1 D2 b n-d W.T(kg) Top Flange Torque Series 14 Series 15 F4 F5 DN F07 45 DN F07 45 DN F07 50 DN F10 65 DN F10 80 DN F DN F DN F DN F DN F14 260
10 10 Section: Gate Valves Resilient Seated Gate Valve/EN558 Series 14 15/PN16 Non-Rising Stem Model: GV-RS(A)-Xl-14-H / GV-RS(A)-Xl-15-H Features Replaceable O-ring according ISO 7259 Low torque operation and abrasion resistance Rubber encaps Wulated wedge Clockwise closing direction Fusion bonded epoxy coated Inside and outside Product color: Blue RAL 5005 or RAL 5017 Maximum temperature 80 C Technical Specifications Design: EN and 2; EN 1171 Face to Face : EN 558 / ISO and 15 base series Flanges:EN PN10/16 Hydraulic test EN Seat Test Pressure: 17.6 bar Shell Test Pressure: 24 bar Operating torque test Nominal pressure designation PN16 bar Optional Extras Stem Cap Position In nd -dicator Top flange in acc. to ISO 5210 B3 Extension Spindle / T Key Gear Box n-d b L DN D2 D Item Part Name Material Grade Item Part Name Material Grade 1 Body DI EN-JS 1050 ( EN-GJS ) EN Wedge DI+Rubber EN-JS 1050 ( EN-GJS ) EN EPDM /NBR EN Thrust Plastic PA (Nylon) EN ISO 1874 Washer 9 O-Ring Rubber EPDM/NBR EN Wedge Nut Brass CW602 N (CuZn36Pb2As) EN Dust Guard Rubber NBR EN Stem Stainless steel ( X20Cr13 ) EN Hand Wheel GI EN-JL 1040 (EN-GJL-250) EN Bonnet Rubber EPDM/NBR EN Gasket 12 Stem Collar Stainless steel (X20Cr13 ) EN Brass CW614 N (CuZn39Pb3) EN Bonnet DI EN-JS 1050 ( EN-GJS ) EN Gland DI EN-JS 1050 ( EN-GJS ) EN Flange Back Sealing Rubber EPDM/NBR EN O Ring 14 Stuffing Brass CW614 N (CuZn39Pb3) EN or Bearing CW617 N (CuZn40Pb2) EN Size L D D1 D2 b n-d H H1 W W.T(kg) Top Flange Torque F4 F5 F4 F5 DN F DN F DN F DN F DN F25 600
11 Section: Gate Valves 11 Service Valve Model: SV-B-H Features Bolt Bonnet Low torque operation Rubber encapsulated wedge Clockwise closing direction Fusion bonded epoxy coated Inside and outside Product color: Blue RAL 5005 or RAL 5017 Maximum temperature 80 C Minimum strength torque (mst) equal to three times maximum operation torque (MOT) according EN Technical Specifications Design: EN and 2; EN 1171 Hydraulic test: EN Seat Test Pressure: 17.6 bar Shell Test Pressure: 24 bar Operating torque test Nominal pressure designation PN16 bar 14,8 H Optional Extras Stem Cap Extension Spindle / T Key G 2 1 S L Item Part Name Material Grade 1 Body Ductile iron EN-JS-1050(EN-GJS-500-7) EN Wedge Brass+Rubber CW602 N (CuZn36Pb2As) EN EPDM EN Bolt Stainless steel (X5CrNi18-10) EN Gasket Rubber NBR/EPDM EN Bonnet Ductile Iron EN-JS-1050(EN-GJS-500-7) EN Circlip Stainless steel (X90CrMoV18) EN Thrust washer Plastic PA(Nylon) EN ISO O-ring Rubber NBR/EPDM EN Stem Stainless steel (X20Cr13) EN Dust guard Rubber NBR EN O-ring Rubber NBR/EPDM EN Seal bushing Plastic PA(Nylon) EN ISO 1874 Size L S H DN DN DN DN DN
12 12 Section: Gate Valves Metal Seated Gate Valve/EN558 Series 14/PN10 Non-Rising Stem Model: GV-MS(A)-S-14-H Features Bolt Bonnet Solid wedge disc Replaceable O-ring according ISO 7259 Clockwise closing direction Seat rings are pressed into wedge and body Product color: Blue RAL 5005 or RAL 5017 Maximum temperature 80 C Technical Specifications Design: EN and 2; EN 1171 Face to Face : EN 558 / ISO base series Flanges: EN PN10 Hydraulic test to EN Seat Test Pressure: 11 bar Shell Test Pressure: 15 bar Nominal pressure designation PN10 bar Optional Extras: Position Indicator Extension Spindle / T Key n-d Top flange in acc. to ISO 5210 B3 b L A W Item Part Name Material Grade Item Part Name Material Grade 1 Body DI EN-JS 1050 ( EN-GJS ) EN Bonnet Graphite Gasket 2 Seat Ring Brass CW602 N (CuZn36Pb2As) EN Bonnet DI EN-JS 1050 ( EN-GJS ) EN Wedge DI EN-JS 1050 ( EN-GJS ) EN Stem Sealing Rubber EPDM EN O Rings 4 Wedge Ring Brass CW602 N (CuZn36Pb2As) EN Gland DI EN-JS 1050 ( EN-GJS ) Flange EN Wedge Nut Brass CW602 N (CuZn36Pb2As) EN Hand Wheel GI EN-JL 1040 (EN-GJL-250) EN Stem Stainless steel ( X20Cr13 ) EN Size L D D1 D2 b n-d H W W.T (kg) DN DN DN DN DN DN DN DN DN DN DN DN
13 Section: Gate Valves 13 Metal Seated Gate Valve/EN558 Series 15/PN16 Non-Rising Stem Model: GV-MS(A)-S-15-H Features Bolt Bonnet Solid wedge disc Replaceable О-ring or Graphite packing Clockwise closing direction Seat rings are pressed into wedge and body Product color: Blue RAL 5005 or RAL 5017 Maximum temperature 150 C W Technical Specifications Design: EN and 2; EN 1171 Face to Face: EN 558 / ISO base series Flanges: EN PN10/16 Hydraulic test to EN Seat Test Pressure: 17.6 bar Shell Test Pressure: 24 bar Nominal pressure designation PN16 bar H DN D2 D Optional Extras: Position Indicator Extension Spindle / T Key Top flange in acc. to ISO 5210 B3 2 1 b n-d L Item Part Name Material Grade Item Part Name Material Grade 1 Body DI EN-JS 1050 ( EN-GJS ) EN Bonnet Gasket Graphite 2 Seat Ring Brass CW602 N (CuZn36Pb2As) EN Bonnet DI EN-JS 1050 ( EN-GJS ) EN Wedge DI EN-JS 1050 ( EN-GJS ) EN Stem Sealing Rubber EPDM EN O Ring 4 Wedge Ring Brass CW602 N (CuZn36Pb2As) EN Gland Flange DI EN-JS 1050 ( EN-GJS ) EN Wedge Nut Brass CW602 N (CuZn36Pb2As) EN Hand Wheel GI EN-JL 1040 (EN-GJL-250) EN Stem Stainless steel (X20Cr13) EN Size L D D1 D2 b n-d H W W.T(kg ) DN DN DN DN DN DN DN DN DN DN
14 14 Section: Gate Valves Metal Seated Gate Valve/EN558 Series 15/PN16 Non-Rising Stem Model: GV-MS(A)-Xl-15-H Features Bolt Bonnet Solid wedge disc Replaceable O-ring according ISO 7259 Clockwise closing direction Seat rings are pressed into wedge and body Product color: Blue RAL 5017 Maximum temperature 80 C W Technical Specifications Design: EN and 2; EN 1171 Face to Face: EN 558 / ISO base series 9 Flanges: EN PN10/16 Hydraulic test to EN Seat Test Pressure: 1,1 x nominal pressure Shell Test Pressure: 1,5 x nominal pressure Nominal pressure designation PN10/16 bar 7 6 H b Optional Extras: Position Indicator Top Flange ISO 5210 Gear box By-Pass Valve n-d L n-d L b L DN D2 D Item Part Name Material Grade Item Part Name Material Grade 1 Body DI EN-JS 1050 ( EN-GJS ) EN By-Pass Valve 2 Seat Ring Brass CW602 N (CuZn36Pb2As) EN Stem Stainless steel (X20Cr13) EN Wedge DI EN-JS 1050 ( EN-GJS ) EN Bonnet DI EN-JS 1050 ( EN-GJS ) EN Wedge Ring Brass CW602 N (CuZn36Pb2As) EN Stem Sealing Rubber EPDM EN O Rings 5 Wedge Nut Brass CW602 N (CuZn36Pb2As) EN Size (DN) L D D1 D2 b n-d L2 H W W.T (kg) DN DN DN DN DN DN DN DN DN DN
15 Section: Gate Valves 15 Knife Gate Valve Model: GV-k-H Technical Specifications Size: DN50-DN300 Face to face: EN558 Series 20 Flanges: EN PN10/16 Inspection test: EN Operating temperature: -10 C +80 C Product color: Blue RAL 5005 or RAL A H DN n-d A L Item Part Name Material Grade 1 Body GI/DI EN-JL 1040 (EN-GJL-250) EN 1561/EN-JS 1050 ( EN-GJS ) EN Seat back ring Stainless steel (X5CrNi 18 9) EN Seat EPDM (NBR)/Metal Metal EN 681-1/ 4 Wedge Stainless Steel (X5CrNi 18 9) EN Stuffing EPDM/NBR EN Gland flange Gi/DI EN-JL 1040 (EN-GJL-250) EN 1561/EN-JS 1050 ( EN-GJS ) EN Steam Nut Brass/Bronze 8 Yoke WCB (GS-C 25) 9 Bushing Brass/Bronze CW602 N (CuZn36Pb2As) EN 12164/CC491K (CuZn40Pb2) EN Top flange Gi/DI EN-JL 1040 (EN-GJL-250) EN 1561/EN-JS 1050 ( EN-GJS ) EN Hand Wheel WCB (GS-C 25) Size L D n-d DN DN DN DN DN DN DN DN DN
16 16 Section: Gate Valves Extension spindles for Service and Gate Valves Model: GV-eS-w Features Easy access to underground mounted service and gate valves Protection against excessive vertical stress Fixed and telescopic options available Optional Extras Adaptor for T-key Adaptor for stem , L3 Item Part Name Material Grade 1. Upper stone DI EN-GJL-300 EN Collar Plastic PVC-U EN ISO Short square Steel S235JR EN Long square Steel S235JR EN Square tube Steel S235JR EN Inner tube Plastic PVC-U EN Outer tube Plastic PVC-U EN Lower cap Plastic PVC-U EN ISO Lower stone Cast iron EN-GJL-300 EN Bell Plastic PЕ EN Telescopic extension spindle ( L=mm ) DN Fixed length extension spindle ( L=mm ) DN Different length available on request
17 Section: Gate Valves 17 Surface Box for Service and Gate Valves MODEL: GV-SB-IP Features Corrosion protection A.. = ---.l 'II ao 99 I I I I I ' v "'+ cr?-] SECTION A - A Item Part Name Material Body Gl 2 Bonnet Gl 3 Bonnet Frame Stainless Steel 4 Bolts Stainless Steel Grade EN-JL 1040 (EN-GJL 250) EN 1561 EN-JL 1040 (EN-GJL-250) EN 1561
18 Notes
19 Butterfly Valves 19
20 20
21 Section: Butterfly Valves 21 Wafer Type Butterfly Valves Technical Specifications Size DN40-DN1200 General Design EN 593 * Mounting Pad Face to Face Flange Drilling Inspection and Test Nominal pressure designation ISO 5210 / ISO5211 EN base series* EN 1092 PN10/PN16* EN PN10/16 * All available General Design and Face to Face Standard refer to the Basic Specification of Wato. * All available Flange drilling kindly refer to the attached Flange Drilling Product Features 2 Wafer,lug or U type flanged body style fit between FF or RF flanges PTFE bushing ensure the maximum shaft support and centralized alignment 360 polished disc assures positive on-off Hard-Backed Cartridge Seat 1 One piece shaft, pinned,splined and square connected disc Universal ISO 5211 mounting Pad. L 3 Item Part name Material Grade 1 Body GI/DI EN-JL 1040 (EN-GJL-250) EN 1561/EN-JS 1050 (EN-GLS-500-7) EN Disc DI / SS304 / SS316 EN-JS 1050 (EN-GLS-500-7) EN (X5CrNi18 9) EN (X5CrNiMo ) EN Stem Stainless Steel (X12Cr13) EN Seat Rubber EPDM EN Bushing Plastic PTFE ISO O Ring Rubber EPDM EN Pin Stainless Steel (GX5CrNiMo ) EN Wato Products specifications in this catalogues are provided for reference only. For precise measurements, please contact Wato Technical Service, Wato reserve the right to change or modify product design, construction, specifications, or materials without prior notice and without incurring any obligation to make such changes and modifications on Wato products previously or subsequently sold.
22 22 Section: Butterfly Valves Butterfly Valve/EN558 Series 20 Wafer Type Model: BFV-wF-H H3 Round Square n-ød 6 5 H2 H1 ØC 7 ØZ 4 3 Double D 2 ØF HXH 45 o Square 1 n1-ød1 ØN ØC1 L ØF H ØF HXH Size ISO5211 EN 1092 PN16 L H1 H2 H3 DN NPS No. ØN ØC1 n1-ød1 ØC n-ød ØZ ØF H F Ø Ø F Ø Ø / F Ø Ø F Ø Ø F Ø Ø F Ø Ø F Ø Ø F Ø Ø F Ø Ø F Ø Ø F Ø Ø F Ø Ø F Ø Ø F Ø Ø F Ø Ø
23 Section: Butterfly Valves 23 Butterfly Valve/EN558 Series 20 Wafer Type Model: BFV-wF-H H3 H2 H1 ØD 6 5 ØC n-ød ØN ØC1 L n1-ød1 Round Square Double D 45 o Square ØZ ØF ØF ØF H H H Size ISO5211 EN 1092 PN16 L H1 H2 H3 DN NPS No. ØN ØC1 n1-ød1 ØD ØC n-ød ØZ ØF H " F Ø Ø " F Ø Ø " F Ø Ø " F Ø Ø " F Ø Ø " F Ø Ø
24 24 Section: Butterfly Valves Butterfly Valve/EN558 Series 20 Lug Type Model: BFV-lG-H H3 Round Square H2 H1 n-m ØC ØZ ØF 4 H 3 2 Double D 45 o Square 1 ØN ØC1 L ØF ØF n1-ød1 H H Size ISO5211 EN 1092 PN16 L H1 H2 H3 DN NPS No. ØN ØC1 n1-ød1 ØC n-ød ØZ ØF H F Ø M F Ø M / F Ø M F Ø M F Ø M F Ø M F Ø M F Ø M F Ø M F Ø M F Ø M F Ø M F Ø M F Ø M F Ø M F Ø M F Ø M F Ø M
25 Section: Butterfly Valves 25 Butterfly Valve/EN558 Series 20 U Type Model: BFV-U-H Round Square H3 H2 H1 6 5 ØD n-ød ØC ØZ ØF Double D H 45 o Square 1 ØN ØC1 n1-ød1 L ØF ØF H H Size ISO5211 EN 1092 PN16 L H1 H2 H3 DN NPS No. ØN ØC1 n1-ød1 ØD ØC n-ød ØZ ØF H F Ø Ø F Ø Ø / F Ø Ø F Ø Ø F Ø Ø F Ø Ø F Ø Ø F Ø Ø F Ø Ø F Ø Ø F Ø Ø F Ø Ø F Ø Ø F Ø Ø F Ø Ø Size ISO5211 EN 1092 PN10 L H1 H2 H3 DN NPS No. ØN ØC1 n1-ød1 ØD ØC n-ød ØZ ØF H F Ø Ø F Ø Ø F Ø Ø F Ø Ø F Ø Ø F Ø18 / / / F Ø Ø F Ø Ø
26 26 Section: Butterfly Valves Butterfly Valve/EN558 Series 13 Concentric, Double Flanged Model: BFV-dFC-H Technical Specifications Size DN50-DN1200 General Design EN593 Flange Drilling EN 1092 PN10/16 Mounting Pad ISO 5211 Face to Face BS 5155; EN series etc. Inspection and Test EN Nominal pressure designation PN10/ Product Features Double flanged style fit between FF or RF flanges High strength body and large safety factor ensure the body can resist high pipe pressure. 3 Overall Vulcanization liner with good performance of resisting tearing apartment and deformation. 2 Universal ISO 5211 mounting Pad. 1 Item Part Name Material Grade 1 Body DI EN-JS 1050 (EN-GLS-500-7) EN Disc DI EN-JS 1050 (EN-GLS-500-7) EN Stem Stainless Steel (X12Cr13) EN Seat Rubber EPDM EN Bushing Plastic PTFE ISO O Ring Rubber EPDM EN Pin Stainless Steel (GX5CrNiMo ) EN Wato Products specifications in this catalogues are provided for reference only. For precise measurements, please contact Wato Technical Service, Wato reserve the right to change or modify product design, construction, specifications, or materials without prior notice and without incurring any obligation to make such changes and modifications on Wato products previously or subsequently sold.
27 Section: Butterfly Valves 27 Model: BFV-dFC-H L H2 H1 H3 H3 n-ød ØC ØN ØC H2 H1 n1-ød1 Size ISO5211 EN 1092 PN10 L H1 H2 H3 DN NPS No. ØN ØC1 n1-ød1 ØC n-ød ØZ ØF H F Ø Ø / F Ø Ø F Ø Ø F Ø Ø F Ø Ø F Ø Ø F Ø Ø F Ø Ø F Ø Ø F Ø Ø F Ø Ø F Ø Ø F Ø Ø F Ø Ø F Ø Ø F Ø Ø F Ø Ø F Ø Ø F Ø Ø
28 28 Section: Butterfly Valves Butterfly Valve/EN558 Series 14 Double Eccentric Model: BFV-dFde-H Technical Specifications n-ød ØC Size General Design Mounting Pad Face to Face Flange Drilling Nominal pressure designation DN100-DN2000 EN593 ISO5211 EN Series EN1092-2PN10/PN16/PN25* PN10/16 Material of Construction Item Part Name Material Grade H2 H1 H3 ØD DN 1 Body DI EN-GJS (EN-JS 1030) EN Disc DI EN-GJS (EN-JS 1030) EN Stem Stainless Steel (X12Cr13) EN B 4 Disc Sealing Rubber EPDM EN Body Sealing Stainless Steel (X5CrNi18 9) EN Bushing PTFE+Non-ferrous PTFE ISO non ferrous metal 2 metal 9 7 Packing Rubber EPDM EN Pin Stainless Steel (X20Cr13) EN A 9 Retaining Ring Stainless Steel (X5CrNi18-9) EN L 6B 1 3A SIZE EN PN10 EN PN16 EN PN25 DN NPS L H1 H2 H3 ØD ØC n-ød ØD ØC n-ød ØD ØC n-ød / / / / / / / / / / / / / / / / / /
29 Section: Butterfly Valves 29 ISO5211 Mounting Pad DN Size ØD ØD2 ØD1 Ø d N h a F05 DN F05 DN F05 DN F05 DN F07 DN F07 DN F07 DN F10 DN F10 DN F10 DN F10 DN F14 DN F14 DN F14 DN F16 DN F16 DN F25 DN F25 DN F25 DN F25 DN F25 DN F30 DN
30 30 Notes
31 Check Valves 31
32 32
33 Section: Check Valves 33 Counterweight Check Valve Model: CHV-Cw(Hd)-d Technical Specifications Size: DN100-DN2000 Nominal pressure designation PN10/16 Face to face: EN558 Series 14 Flanges: PN10/16 Inspection test: EN Product color: Blue RAL 5005 or RAL 5017 Double eccentric design Optional Extras Hydraulic damper n-d Item Part Name Material Grade 1 Body DI EN-JS 1050 ( EN-GJS ) EN 2 Body Seat SS (X5CrNi18 9) EN Disc Seat Ring Rubber EPDM EN Disc Seat Ring Cover DI EN-JS 1050 ( EN-GJS ) EN 5 Disc DI EN-JS 1050 ( EN-GJS ) EN 6 Down Shaft SS (X20Cr13) EN Up Shaft SS (X20Cr13) EN Bolt SS (X5CrNi18 9) EN Shaft End Cover DI EN-JS 1050 ( EN-GJS ) EN 10 Down Shaft Bearing SS+PTFE 11 Up Shaft Bearing SS+PTFE 12 Ballance Weight GI EN-JL 1040 (EN-GJL-250) EN Arm DI EN-JS 1050 ( EN-GJS ) EN 14 Cylinder WCB (GS-C 25)/ 15 Yoke DI EN-JS 1050 ( EN-GJS ) EN PN10 PN16 DN L (F4) ØD ØD0 ØD1 n-ød t f DN L (F4) ØD ØD0 ØD1 n-ød t f DN DN DN DN DN DN DN DN DN DN DN DN DN DN DN DN DN DN DN DN DN DN ? DN DN DN DN DN DN DN DN DN DN
34 34 Section: Check Valves Silent Check Valve Model: CHV-S-H Technical Specifications Size: DN50-DN300 Nominal pressure designation: PN10/16 Flanges: EN PN10/PN16 Inspection test: EN Product color: Blue RAL 5005 or RAL 5017 Features Globe design to provide semi-straight flow Non-slam closure against water hammer Expanded flow area to reduce head losses Reasilients seat to provide zero leakages Item Part Name Material Grade 1 Body DI EN-JS 1050 ( EN-GJS-500-7) EN Seat EPDM/NBR EN Bushing Aluminium-bronze C954 EN Disc DI/Stainless Steel EN-JS 1050 ( EN-GJS-500-7) EN 1563/ (X5CrNi 18 9) EN Spring Stainless Steel (X5CrNi 18 9) EN Bolts Stainless Steel (X5CrNi 18 9) EN Stem Stainless Steel (X12CrS13) EN Frame DI EN-JS 1050 ( EN-GJS-500-7) EN 1563 Size L D D1 n-ød DN DN DN DN DN DN DN DN DN
35 Section: Check Valves 35 Check Valve/EN558 Series 48/PN16 Swing Type Model: CHV-Sw-H Features Full port A Bolted cover Suitable for both horizontal and vertical installation Product color: Blue RAL 5005 or RAL 5017 Wet spray or FBE coated 8 Options External lever arm and weight D2 D1 D H Technical Specifications Face to Face: EN 558 / ISO base series Flanges: EN PN10/16 Hydraulic test to EN Seat Test Pressure: 17.6 bar Shell Test Pressure: 24 bar Nominal pressure designation PN16 bar A L n-d d Item Part Name Material Grade Item Part Name Material Grade 1 Body DI EN-JS 1050 ( EN-GJS ) EN Disc DI EN-JS 1050 ( EN-GJS ) EN Seat Ring Brass CW602 N (CuZn36Pb2As) EN Hanger DI EN-JS 1050 ( EN-GJS ) EN 1563 Bronze CC491K (CuZn40Pb2) EN Hanger Pin Stainless Steel (GX5CrNiMo ) EN Stainless steel (GX5CrNiMo ) EN Disc RIng Brass/Bronze CW602 N (CuZn36Pb2As) EN / CC491K (CuZn40Pb2) EN Cover Gasket Graphite With Soft Steel Rubber EPDM/NBR EN Cover DI EN-JS 1050 ( EN-GJS ) EN 1563 Stainless steel (GX5CrNiMo ) EN10088 Size L D D1 D2 B n-d H W.T (kg) DN DN DN DN DN DN DN DN DN DN DN DN DN DN DN
36 36 Section: Check Valves Ball Check Valves Model: CHV-Bl-H Item Part Name Material Grade Item Part Name Material Grade 1 Body DI EN-JS 1050 ( EN-GJS ) EN Bonnet DI EN-JS 1050 ( EN-GJS ) EN Ball Steel+Rubber Steel + EPDM EN Steel + NBR EN Bonnet Rubber NBR/EPDM EN Gasket 5 Bolts Stainless Steel (X5CrNi18-10) EN Check Valve/BSP threaded connection Ball Type Threaded DN B H L H DN D2 D1 D H DN B L Size L В H Weight DN DN DN DN Check Valve/EN558 Series 48 Ball Type Flanged b L DN50-DN150 DN200-DN300 EN PN16 AS 2129 TABLE Е Size b H Weight L D D1 D2 n-d D D1 D2 n-d DN DN DN DN DN DN DN DN DN
37 Section: Check Valves 37 Check Valve/EN558 Series 16 Dual Plate Model: CHV-dP-H Technical Specifications Size Nominal pressure designation Face to Face DN40-DN800 PN10/PN16 Flange Drilling EN1092-PN10/PN16 * Inspection and Test Product Features EN base series / ISO series EN Wafer body style fits between flanges type A (flat face) or B (raised face). Upper and lower PTFE thrust washers Resilient NBR/EPDM seat.. Dual Plate Valves give maximum strength with minimum opening time. Torsion springs assist valve closure, preventing flow reversal. Thrust washers reduce friction and wear of valve plate hinges. Parts Description Material Grade 1 Body GI EN-JL 1040 (EN-GJL-250) EN Disc DI/Stainless Steel EN-JS 1050 ( EN-GJS ) EN 1563/ (GX5CrNi19-10) EN Stem Stainless Steel (X12CrS13) EN Seat EPDM 5 Spring Stainless Steel AISI Washer PTFE 7 Hex Nut Carbon Steel (42CrMo4) EN SIZE D L DN NPS PN10 PN16 D1 D
38 38 Section: Check Valves Check Valve Wafer Type Model: CHV-wF-H Technical Specifications Size Nominal pressure designation Inspection and Test DN32-DN600 PN10/PN16 EN Product Features This wafer swing check valve with circular clack which is one of ultra- thin check valve. Compare with the traditional check valves, the new ones open/close angle is big,the circulation is fine, rotates is swiftly, structure is compact,external form is beautiful, weight is light, assembles conveniently. There are two type of this wafer check valve, spring type a nd without spring type. Without spring type only can be used in the stable working conditions. The valve can be used in the field that assembling space is limited, such as petrochemical industry, water supply system and metallurgy industry etc. Parts Description Material Specification 1 Hook Stainless Steel (X5CrNiMo ) EN Body WCB / SS304 / SS (GS-C 25)/ (X5CrNi18 9) EN / (X5CrNiMo ) EN Screw Stainless Steel (GX5CrNi19-10) EN Spring Stainless Steel (X10CrNi18-8) EN Disc WCB / SS304 / SS316 6 Seat Ring Rubber EPDM EN O Ring Rubber EPDM EN (GS-C 25)/ (X5CrNi18 9) EN / (X5CrNiMo ) EN SIZE D L DN NPS PN6 PN10 PN16 PN25 a d 32 1" /2" " /2" " " " " " " " " " " " "
39 Strainers 39
40 40
41 Section: Strainers 41 Strainer Y type Model: S-Y-H Features Y-Pattern Stainless Steel Screen Bolted Cover Flanged Ends FBE Coated 6 5 Technical Specifications Face to Face: EN 558 / ISO base series Flanges: EN PN10/16 Hydraulic test to EN Seat Test Pressure: 17.6 bar Shell Test Pressure: 24 bar Nominal pressure designation PN10/16 bar Item Part Name Material Grade Item Part Name Material 1 Body DI EN-JS 1050(EN-GJS-500-7) EN Bolt & Nut Galvanized flat head bolt Galvanized stud bolt 2 Cover Gasket Graphite With Sofe Steel Stainless Steel Rubber EPDM/NBR EN Cover DI EN-JS 1050(EN-GJS-500-7) EN Screen SS Perforated Mesh 4 Plug Zine Steel BSPT Size L D D1 D2 b n-d H Plug W.T (kg) DN /4 1.7 DN / DN / DN /4 5 DN / DN /2 8.7 DN /2 12 DN /2 19 DN /2 27 DN /4 40 DN /4 58 DN /4 86 DN DN DN DN DN DN Mesh Mesh Dia.of Wire Width of Opening Opening mm mm %
42 42 Notes
43 Air Valves 43
44 44
45 Section: Air Valves 45 Single Chambre/Single Function Air Valve Model: AV-1C-1F-dG Technical Specifications Size: 1 (Optional flange sizes DN40-DN150) Nominal pressure designation: PN10/16/25 Flanges: EN PN10/16/25/40 Operating temperature: -10 C +80 C Product color: Blue RAL 5005 or RAL 5017 H l Part name Material Grade Body DI EN-GJS (EN-JS 1030) EN1563 Cover DI EN-GJS (EN-JS 1030) EN1563 Ball Foam polypropylene Orifice body Brass CW602 N (CuZn36Pb2As) EN Orifice cover Brass CW602 N (CuZn36Pb2As) EN O-ring EPDM/NBR EN Screw Galvanized steel Pin Stainless steel (X5CrNi18 9) EN Sealing EPDM/NBR EN Size H L Weight (kg) with flanges PN 10/16 PN 25/40 DN DN ,5 DN DN DN DN
46 46 Section: Air Valves Single Chambre/Double Function Air Valve Model: AV-1C-2F-dG Technical Specifications Size: DN40-DN500 Nominal pressure designation: PN10/16/25 Flanges: EN PN10/16/25 Operating temperature: -10 C +80 C Product color: Blue RAL 5005 or RAL 5017 l l H H Part name Material Grade Body DI EN-GJS (EN-JS 1030) EN1563 Cover DI EN-GJS (EN-JS 1030) EN1563 Mesh PVC and Naylon (Polyamide 6) Ball Foam polypropylene (DN40-DN150) Polyethylene (DN200-DN500) Disc Brass CW602 N (CuZn36Pb2As) EN O-ring EPDM/NBR EN Screw Galvanized steel Size H W L Weight (kg) PN10 PN16 PN25 PN40 PN10 PN16 PN25 PN40 DN ,5 10, DN ,5 10, DN DN ,5 14,5 DN ,2 24,2 DN DN ,5 31,5 DN DN DN DN DN DN
47 Section: Air Valves 47 Double Chambre/Triple Function Air Valve Model: AV-2C-3F-dG Technical Specifications Size: DN40-DN500 Nominal pressure designation: PN10/16/25 Flanges: EN PN10/16/25 Operating temperature: -10 C +80 C l Product color: Blue RAL 5005 or RAL 5017 l H H Part name Material Grade Body DI EN-GJS (EN-JS 1030) EN1563 Cover DI EN-GJS (EN-JS 1030) EN1563 Mesh PVC and Naylon (Polyamide 6) Ball Foam polypropylene (DN40-DN150) Polyethylene (DN200-DN500) Disc Brass CW602 N (CuZn36Pb2As) EN O-ring EPDM/NBR EN Orifice cover Brass CW602 N (CuZn36Pb2As) EN Screw Galvanized steel Pin Stainless steel (X5CrNi18 9) EN Sealing EPDM/NBR EN Size H W L Weight (kg) PN10 PN16 PN25 PN40 PN10 PN16 PN25 PN40 DN DN DN ,1 20, DN ,4 20, DN ,2 31, DN ,5 34,5 DN ,5 36,5 DN DN DN DN DN DN
48 48 Section: Air Valves Air Valve for Sewage Model: SAV-1C-3F-dG Technical Specifications Size: DN40-DN500 Nominal pressure designation: PN10/16 Flanges: EN PN10/16 Operating temperature: -10 C +80 C Product color: Blue RAL 5005 or RAL 5017 l H Part name Material Grade Body DI EN-GJS (EN-JS 1030) EN1563 Drainage ball valve 1 Brass CW602 N (CuZn36Pb2As) EN Stem Stainless steel (X5CrNiMo ) EN Spring Stainless steel (X5CrNiMo ) EN Bolt, nut and washer Stainless steel (X5CrNiMo ) EN Float Foamed polypropylene Orifice body Reinforced nylon Orifice cover Reinforced nylon Seal plug assembly Reinforced nylon/epdm/stainless steel Clamping stem Reinforced nylon O-ring BUNA-N EN Size H W L Weight (kg) DN DN ,5 DN ,5 DN DN
49 Rubber Expansion 49
50 50
51 Section: Rubber Expansion 51 Rubber Expansion Joint Single Sphere Model: Rj-SS-H Technical Specifications Size: DN32-DN1000 Nominal pressure designation: PN10/16 Flanges: EN PN10/16 Permits More Movements Features Applicable for suction and delivery (discharge). Provides sound and vibration isolation. Gaskets and packing are not required. Floating flanges allow for easy installation. Prevents piping system and equipment breakdown by absorbing and contraction caused by temperature variances. Absorbs water pulsation and minimizes water hammering. L Axial Elongation Lateral movement Axial Compression Angular Movement Item Part Name Material 1 Flanges Carbon Steel 2 Reinforcing Cord Carbon Steel 3 Tube Synthetic Fiber 4 Body Synthetic Rubber Size L Axial Elongation Axial Compression Lateral Movement Angular Flexion DN DN DN DN DN DN DN DN DN DN DN DN DN DN DN DN DN DN DN DN
52 52 Notes
53 Couplings & Fittings 53
54 54 Section: Couplings & Fittings Universal Flange Adaptor Model: FA-U-H Features Nominal pressure designation: PN16 Equipped with galvanized steel bolts, nuts EPDM or NBR rubber seals High Tolerance Mechanical Pipe Fittings Angular deflection +/- 6 FBE coated Flanges EN PN10/16 Item Part Name Material Specification 1 Body Ductile Iron EN-JS-1050(EN-GJS-500-7) EN End Ring Ductile Iron EN-JS-1050(EN-GJS-500-7) EN Rubber Seal Rubber NBR/EPDM/EN Bolt Zinc-plated Steel 5 Washer Zinc-plated Steel 6 Nut Zinc-plated Steel Size Pipe O.D. (mm) D D2 D3 L1 L M Bolts No Weight Flange Designation PN10/PN16 DN M12* DN M12* DN M12* DN M12* DN M12* DN M12* DN M12* DN M12* DN M12* DN M12* DN M12* DN M12* DN M12* DN M12* DN M12* DN M12* DN M12* DN M12*
55 Section: Couplings & Fittings 55 Universal Flange Adaptor Wide Range Model: FA-U-wR-H Features Nominal pressure designation: PN16 Equipped with galvanized steel bolts, nuts EPDM or NBR rubber seals High Tolerance Mechanical Pipe Fittings Angular deflection +/- 6 FBE coated Flanges EN PN10/16 Item Part Name Material Specification 1 Body Ductile Iron EN-JS-1050(EN-GJS-500-7) EN End Ring Ductile Iron EN-JS-1050(EN-GJS-500-7) EN Rubber Seal Rubber NBR/EPDM/EN Bolt Zinc-plated Steel 5 Washer Zinc-plated Steel 6 Nut Zinc-plated Steel Size PipeO.D. (mm) D D2 D3 L M L1 Bolts No. DN M DN M DN M DN M DN M DN M DN M DN M DN M DN M DN M DN M DN M DN M DN M DN M DN M DN M DN M Weight
56 56 Section: Couplings & Fittings Universal Coupling Model: C-U-H Features Nominal pressure designation: PN16 Equipped with galvanized steel bolts, nuts EPDM or NBR rubber seals High Tolerance Mechanical Pipe Fittings Angular deflection +/- 6 FBE coated Item Part Name Material Specification 1 Body Ductile Iron EN-JS-1050(EN-GJS-500-7) EN End Ring Ductile Iron EN-JS-1050(EN-GJS-500-7) EN Rubber Seal Rubber NBR/EPDM/EN Bolt Dacromet Coated Steel IS0898-1: Washer Dacromet Coated Steel 6 Nut Dacromet Coated Steel IS0898-2: Cap Plastic Size Pipe O.D. (mm) D L1 L M Weight (kg) DN M12* DN M DN M 12* DN M 12* DN M 12* DN M12M DN M12* DN M 12* DN M12* DN M 12* DN M 12* DN M 12* DN M 12* DN M14* DN M 14* DN M 14* DN M 14* DN M 14* DN M 14*250 60
57 Section: Couplings & Fittings 57 Universal Coupling Wide Range Model: C-U-wR-H Features Nominal pressure designation: PN16 Equipped with galvanized steel bolts, nuts EPDM or NBR rubber seals High Tolerance Mechanical Pipe Fittings Angular deflection +/- 6 FBE coated Item Part Name Material Specification 1 Body Ductile Iron EN-JS-1050(EN-GJS-500-7) EN End Ring Ductile Iron EN-JS-1050(EN-GJS-500-7) EN Rubber Seal Rubber NBR/EPDM/EN Bolt Zinc-plated Steel 5 Washer Zinc-plated Steel 6 Nut Zinc-plated Steel Size Pipe O.D. (mm) D D2 D3 L M L1 Bolts No. Weight (kg) DN M DN M DN M DN M DN M DN M DN M DN M DN M DN M DN M DN M DN M DN M DN M DN M DN M DN M DN M
58 58 Section: Couplings & Fittings Restrained Flange Adaptor for PE/PVC Pipe Model: FA-Pe-H Features Nominal pressure designation: PN16 Equipped with galvanized steel bolts, nuts EPDM or NBR rubber seals High Tolerance Mechanical Pipe Fittings Angular deflection +/- 6 FBE coated Flanges EN PN10/16 Item Part Name Material Specification 1 Center Sleeve Ductile Iron EN-JS-1050(EN-GJS-500-7) EN Sealing Ring Rubber+Brass NBR/EPDM+Brass 3 End Ring Ductile Iron EN-JS-1050(EN-GJS-500-7) EN Screwed rods Zinc-plated steel 5 Washer Zinc-plated steel 6 Nuts Zinc-plated steel 7 Cap Plastic Size Pipe O.D. D3 D b L1 L Bolts Qty Flange Designation EN PN10/PN16 DN *M12 DN *M12 DN *M12 DN *M12 DN *M12 DN *M12 DN *M12 DN *M12 DN *M12 DN *M12 DN *M12
59 Section: Couplings & Fittings 59 Restrained Coupling for PE/PVC Pipe Model: C-Pe-H Features Designed for PE/PVC pipes Nominal pressure designation: PN16 Fusion bonded, epoxy coated RAL5005/RAL5017 Angular deflection +/- 3. Item Part Name Material Specification 1 Center Sleeve Ductile Iron EN-JS-1050(EN-GJS-500-7) EN Sealing Ring Rubber+Brass NBR/EPDM+Brass 3 End Ring Ductile Iron EN-JS-1050(EN-GJS-500-7) EN Screwed Rods Zinc-plated steel 5 Washer Zinc-plated steel 6 Nuts Zinc-plated steel 7 Cap Plastic Size Pipe OD A L Bolts Qty DN *M12 DN *M12 DN *M12 DN *M12 DN *M12 DN *M12 DN *M12 DN *M12 DN *M12 DN *M12 DN *M12 DN *M12
60 60 Section: Couplings & Fittings Dismantling Joint Model: dj-u-h Features Fusion bonded epoxy coating RAL5005/RAL5017 Nominal pressure designation: PN10/16 Sizes DN80-DN2200 Free Movement: DN H = +/ 25mm Part Name Material Specification Outer Flange Ductile Iron EN-JS 1050 ( EN-GJS ) EN1563 Sealing Ring Rubber EPDM/EN Middle Flange Ductile Iron EN-JS 1050 ( EN-GJS ) EN1563 Inner Flange Ductile Iron EN-JS 1050 ( EN-GJS ) EN1563 Washer Stud Nut Zinc-plated steel Zinc-plated steel Zinc-plated steel DN Pipe OD Length PN16 Flange Drilling Weight D2 L1 L2 D4 D5 Stud & Nut M M M M M M M M M M M M M M M M M M : M M M M M M
61 Section: Couplings & Fittings 61 Tapping Saddle Model: ts-u-tr Features Designed for: iron, asbesthos cement or steel pipes Nominal pressure designation: PN16 Fusion bonded, epoxy coated RAL5005/RAL5017 A B C Part Name Material Specification Body Ductile Iron EN-JS-1050(EN-GJS-500-7) EN 1563 Rubber Seal Rubber EPDM EN Pipe O.D. Outlet (inches) A B C / / / / / * * 2 1/ *
62 62 Section: Couplings & Fittings Tapping Saddle for PE/PVC Pipes Model: ts-pe-dg-r Features Designed for: PE/PVC Pipes Dual grip Nominal pressure designation: PN10/16 Fusion bonded, epoxy coated RAL5005/RAL5017 Part Name Material Specification Body Ductile Iron EN-JS-1050(EN-GJS-500-7) EN 1563 Rubber Seal Rubber EPDM EN Screws M10 Zinc-plated steel DN Headstock Outlet L L1 H Weight 50 3/ / /4 1 1/ / /4 1 1/ / /4 1 1/ / /4 1 1/ / /4 1 1/ / /4 1 1/ / /4 1 1/ /4 1 1/ / /4 1 1/ / /4 1 1/ /
63 Section: Couplings & Fittings 63 Tapping Saddle for PE/PVC Pipes Model: ts-pe-sg-r Features Designed for: PE/PVC Pipes Single grip PN10/PN16 working pressure Fusion bonded, epoxy coated RAL5005/RAL5017 Part Name Material Specification Body Cast Iron EN-JL 1040 (EN-GJL-250) Rubber Seal Zinc plate steel DN Headstock Outlet L L1 H Weight 32 1/2 3/ / / / / /4 1 1/ / /4 1 1/ / /4 1 1/ / / /4 1 1/ / / /4 1 1/ / / /4 1 1/ / /4 1 1/ / /4 1 1/ / /4 1 1/ / /
64 64 Notes
65 Repairs 65
66 66
67 Section: Repair Clamps 67 Repair Clamps Single Band Features Special leak proof design Certified for contact with drinking water rubber gasket High corrosion resitance Item Part Name Material Grade 1 Body SS (X5CrNi 18 9) 2 Rubber EPDM EN Washer Corrosion protected 4 Bolt Corrosion protected WP Working range clamp length, mm bar mm
68 68 Section: Repair Clamps Repair Clamps Dual Band Features Special leak proof design Certified for contact with drinking water rubber gasket High corrosion resitance Item Part Name Material Grade 1 Body SS (X5CrNi 18 9) 2 Rubber EPDM EN Washer Corrosion protected 4 Bolt Corrosion protected WP Working range clamp length, mm bar mm
69 Section: Repair Clamps 69 Repair Clamp special fastening system for easy installation Features Special leak proof design Certified for contact with drinking water rubber gasket High corrosion resitance Double band model available for sizes over 350 mm Item Part Name Material Grade 1 Body SS (X5CrNi 18 9) 2 Rubber EPDM EN Washer Corrosion protected 4 Bolt Corrosion protected WP Working range clamp length, mm bar mm
70
71 71
Cast Iron Valves. Product Information. It s all at Albion
Cast Iron Valves Product Information It s all at Albion ART 77-78 Cast Iron Ball Valve Flanged Ends Flange Mounting PN16 Only ISO 5211 Direct Mount (Not 200mm) Art 77/78 Plated Brass/Stainless Ball BS
More informationflowit by Fig. FTBGW-20 Bronze Gate Valve, Non-Rising Stem BS 5154 PN20 Material Specifications Dimensions (mm)
flowit flowit by Bronze Gate Valve, Non-Rising Stem BS 5154 PN20 Fig. FTBGW-20 Designed to BS 5154 Pressure Rating: PN20 Threaded Bonnet End connection: BS21 Taper Threaded (ISO 7) / BS EN10226-2 Shell
More informationCast-Iron Valves G101 DI BUTTERFLY VALVE LEVER... 2 G401 CI GLOBE VALVE CL G403 CI GLOBE VALVE PN G103 DI BUTTERFLY VALVE GEAR...
Cast-Iron Valves PAGE G101 DI BUTTERFLY VALVE LEVER.... 2 PAGE G401 CI GLOBE VALVE CL125.... 9 G103 DI BUTTERFLY VALVE GEAR.... 3 G403 CI GLOBE VALVE PN16.... 10 G201 CI Y STRAINER CL125.... 4 G501 CI
More informationBS 5163 Resilient Wedge Gate Valve
BS 516 Resilient Wedge Gate Valve BS 516 Flanged Resilient OS&Y Gate Valve, Type A, (XZ41X), /16, Gate valves serve to cut the medium flow in the piping system, widely used in the field of potable water,
More informationTEL: Version: KW2
WWW.KLAMBON.COM 1 Page Klambon Water is a wholly owned subsidiary of West Rand Engineering (WRE), we are suppliers of valves, fittings and related products to all industries and our service extends to
More informationCLASS 400 FORGED BRASS BALL VALVE
CLASS 400 FORGED BRASS BALL VALVE FIG. 214 Screwed body cap, PTFE seats, Blowout-proof stem. Screwed ends to BS 21. Nickel plated body. Chrome plated ball. UNI-FLO NYLON BALL VALVES FIG. 214NS/NB Features:
More informationValves Range RVRX - Resilient Seated Gate Valve PN16 Flange
Valves Range RVRX - Resilient Seated Gate Valve PN16 Flange No Component Material 1 Body Ductile iron GGG40 2 Wedge DI Fully Vulcanised EPDM 3 Wedge Nut Brass 4 Stem SS420 5 Bolt Q235+Zinc 6 Gasket EPDM
More informationCV-SFS4-PN16 SERIES SLIENT CHECK VALVE, GLOBE TYPE FEATURES SPECIFICATIONS PRODUCT IDENTIFICATION SYSTEM PRODUCT DATA
CV-SFS4-PN16 SERIES SLIENT CHECK VALVE, GLOBE TYPE Silent check function Temperature -10 ~ +120 PRODUCT IDENTIFICATION SYSTEM 2 Disc Ductile iron GGG 40 3 Spring Stainless steel SUS304 4 Bush Bronze 1400
More informationAVK TOTAL CONTROL INSIDE BUILDINGS GENERAL VALVES FOR BUILDING
AVK TOTAL CONTROL INSIDE BUILDINGS GENERAL VALVES FOR BUILDING SERVICE MEMBER OF THE GROUP GATE VALVE RESILIENT SEATED FULLY VULCANIZED WEDGE Product series: S02, S21, S06, S15, S55 Rising stem/non rising
More informationAVK UK GROSS PRICE LIST 2017
AVK UK GROSS PRICE LIST 2017 AVK UK GROSS PRICE LIST 2017 AVK UK PRICE LIST 2017 AVK UK is part of the globally renowned AVK Group, one of the leading manufacturers of valves for the water, gas and waste
More informationHattersley Newman Hender Ltd
Product Guide Quality Valves from Hattersley WHEN IT REALLY COUNTS, YOU CAN DEPEND ON HATTERSLEY Hattersley Newman Hender is one of the world s premier manufacturers of cast iron, ductile iron and copper
More informationISO RESILIENT WEDGE GATE VALVE. Engineering Creative Solutions for Fluid Systems Since 1901
ISO RESILIENT WEDGE GATE VALVE Engineering Creative Solutions for Fluid Systems Since 1901 TABLE OF CONTENTS ISO RESILIENT WEDGE GATE VALVE Scope of Line...1 Features and Benefits...1 Suggested Specification...2
More informationOPTIMAL VALVE SOLUTIONS FOR OIL AND GAS PLANTS
AVK FLOW CONTROL OPTIMAL VALVE SOLUTIONS FOR OIL AND GAS PLANTS InterApp World Valve Wouter Witzel TEC artec AVK 1 2 AVK FLOW CONTROL l OIL & GAS PLANTS CONTENT: AVK FLOW CONTROL 4-5 OFFSHORE PRODUCTION
More informationBUTTERFLY VALVE - WAFER FAF 3500
PRODUCTION STANDARDS DN40 DN600 PN 6-10-16 CLASS 150 Design EN 593 Connection Wafer Type ISO 7005-1 EN 1092-1 Face to Face EN 558 Series 20 Marking EN 19 Tests EN 12266-1 Corrosion Protection Electrostatic
More informationRESILIENT SEATED GATE VALVE FAF 6200
PRODUCTION STANDARTS DN40 DN800 PN 10-16 Design EN 1171 / EN 1074 Connection Face to Face EN 1092-2 / ISO 7005-2 - Flanged EN 558 Series 15 / DIN 3202 F5 Marking EN 19 Tests EN 12266-1 Corrosion Protection
More informationValves. BS Standard JINAN MEIDE CASTING CO., LTD.
Valves BS Standard JINAN MEIDE CASTING CO., LTD. Resilient Wedge Gate Valve XZ81X Grooved Resilient OS&Y Gate Valve Page 11 XZ51X Flanged x Grooved Resilient OS&Y Gate Valve Page 12 Z85X Grooved Resilient
More informationWater Supply and Sewerage Approved Products Manual - February 2006
Water Supply and Sewerage Approved Products Manual - February 2006 Pressure Sewerage Products Valves Section SPO 01 Last updated Jan 2007 CONTENTS SPO 1-S1 GAS RELEASE VALVE A SPO 1-S2 COMBINATION GAS
More informationNon Return Valves.
Non Return Valves Table of contents Product information Type 4010 & 4010HD Type 4010, with lever and weight Type 4010 HD, with lever and weight + hydraulic damper Type 4020, slanted seat with/without damper
More informationKVC VALVES AND PEX FITTINGS
KVC VALVES AND PEX FITTINGS 2011 KVC VALVES & PEX FITTINGS CATALOGUE 2 P a g e Table of contents 1. Cast Steel Valves..4 FIG. 272-CS-15 ( Gate ).....5 FIG. 272-CS-300 ( Gate )......6 FIG. 272-CS-600 (
More informationMADE OF STAINLESS...
MADE OF STAINLESS... Size : Ends : Min Temperature : Max Temperature : DN 50 to 600 mm ( NPS 2" to 24" ) Between Class 150 (PN20) flanges 29 C + 210 C Max Pressure : 20 Bars Specifications : Double eccentric
More informationBUTTERFLY VALVE 17 SERIES Gearbox
DN H1 H2 H3 BUTTERFLY VALVE 17 SERIES Gearbox FIGURE: 17234ER: 17234BR: 17234VR: Seat in EPDM, with gearbox Seat in Buna, with gearbox Seat in Viton, with gearbox B ØR L DIMENSIONS: (mm) DN L B XR H1 H2
More informationTechnical changes kept in reserve THROUGH CONDUIT KNIFE GATE VALVE
Technical changes kept in reserve THROUGH CONDUIT KNIFE GATE VALVE The B model knife gate is a bi-directional wafer valve designed for media with high consistency. The double seat design assures a non-clogging
More informationSize : Ends : Min Temperature : Max Temperature : Materials : Cast iron body. Certificate 3.1
Certificate 3.1 Size : Ends : Min Temperature : Max Temperature : DN 40 to DN 600 Between flanges PN10/16-15 C + 110 C ( 130 C C temporarily) Max Pressure : 16 Bars up to DN300, 10 bars over Specifications
More informationHYDRAULIC CONTROL VALVES
HYDRAULIC CONTROL VALVES The automatic control valves are diaphragm valves designed to provide hydraulically driven solutions to pressure, flow and level control applications. Features: Main valve uses
More informationMaterials : Carbon steel or stainless steel
Size : Ends : Min Temperature : Max Temperature : DN 50 to 600 mm Between PN25 or PN16 flanges 29 C + 210 C Max Pressure : 25 Bars Specifications : Double eccentric Wafer type Fire safe according to ISO
More informationND = Double Door, SEAT NBR ES = Center Guided Silent Check / EPDM NS = Center Guided Silent Check / NBR. Butterfly Valves, Seat in body.
MAS-WDI-1118 MAS W-Series Water Works / Fire Protection Valves ORDERING CODES Series XX = Valve Type X = CWP XX = Design Type XX = End Connection W = AWWA/UL/FM, 10 = Gate Valve A = 300 CWP RS = Rising
More informationMADE OF STAINLESS... Certificate 3.1
MADE OF STAINLESS... Certificate 3.1 Size : Ends : Min Temperature : Max Temperature : DN 32/40 to DN 1200 Between flanges PN6,PN10/16,Class 150,JIS10K* -10 C + 110 C ( 130 C temporarily ) Max Pressure
More informationHigh-pressure shut-off globe valve V30 High-pressure shut-off globe valve with control cone V40 PN , DN , T max : 550 C
High-pressure shut-off globe valve V30 High-pressure shut-off globe valve with control cone V40 PN 63-160, DN 50 150, T max : 550 C Shut-off globe valve (series V30) or shut-off globe valve with control
More informationLATEST ARRIVALS CATALOGUE STOCK
LATEST ARRIVALS CATALOGUE STOCK PIPES VALVES FLANGES & FITTINGS IN CARBON STEEL STAINLESS STEEL LATEST ARRIVALS!!!!!! VALVE PRODUCTS CAST IRON WAFER TYPE BUTTERFLY VALVE, PINLESS SHAFT, DUCTILE NICKEL
More informationWAFER STYLE KNIFE GATE VALVE
WAFER STYLE KNIFE GATE VALVE The model knife gate is an uni-directional wafer valve designed for general industrial service applications. The design of the body and seat assures non-clogging shut off on
More informationSECTION GENERAL-DUTY VALVES FOR HVAC. A. Section includes valves for building services piping.
SECTION 23 05 23 GENERAL-DUTY VALVES FOR HVAC PART 1 - GENERAL 1.1 SUMMARY A. Section includes valves for building services piping. 1.2 REFERENCES A. AGA Z21.22 (American Gas Association) - Relief Valves
More informationUniwat. Resilient Seated Gate Valves
Uniwat Resilient Seated Gate Valves www.comeval.es Resilent Seated Gate Valves - UNIWAT 504/507 Copyright COMEVAL VALVE SYSTEMS - Data subject to revision - Regularly updated data on www.comeval.es - DS01
More informationWAFER STYLE KNIFE GATE VALVE
11 WAFER STYLE KNIFE GATE VALVE The model knife gate is an uni-directional wafer valve designed for general industrial service applications. The design of the body and seat assures non-clogging shut off
More informationValves for building. Y-strainers... page 204 PVC valves Ball valves... page 204 Butterfly valve... page 204 Ball check valve...
Valves for building Ball valves PN25/20... page 194 PN30/20... page 195 PN40/30 - Lead-free brass... page 196 Valve for gas... page 197 Stem extension valves... page 197 3 way valves... page 197 Mini valves...
More informationMaterials : Ductile iron EN GJS body, EPDM seat
Reinforced lug from DN200 to DN1400 : Certificate 3.1 Size : Ends : Min Temperature : Max Temperature : DN 32 to 1400 mm Between flanges PN10/16-20 C + 110 C Max Pressure : 16 Bars up to DN300 Specifications
More informationValves for building. Y-strainers... page 272 PVC valves Ball valves... page 272 Butterfly valves... page 272 Ball check valves...
Valves for building Ball valves PN25/20... page 262 PN30/20...pages 262 to 263 PN40/30 - Lead-free brass... page 264 Valve for gas... page 265 Stem extension valves... page 265 3 way valves... page 265
More informationMaterials : Carbon steel or stainless steel
Size : Ends : Min Temperature : Max Temperature : DN 50 to 600 mm Between PN25 flanges - 29 C + 210 C Max Pressure : 25 Bars Specifications : Double eccentric Wafer type Fire safe according to ISO 10497
More informationMaterials : Ductile iron body EN GJS
Certificate 3.1 Size : Ends : Min Temperature : Max Temperature : DN 40 to 600 mm Between flanges PN10/16-10 C + 110 C Max Pressure : 16 Bars up to DN300, 10 bars over Specifications : Long neck for isolation
More informationSize : Ends : Min Temperature : Max Temperature : Materials : Cast iron body. Certificate 3.1. * according to DN
Certificate 3.1 Size : Ends : Min Temperature : Max Temperature : DN 32/40 to DN 300 Between flanges PN6,PN10/16,Class 150,JIS10K* -10 C + 80 C Max Pressure : 16 Bars Specifications : Long neck for isolation
More informationseries BUTTERFLY VALVE DOUBLE ECCENTRIC FLANGED FAF 3800 PRODUCTION STANDARDS DN100 DN2000 PN Design EN 593 EN ISO Flanged
PRODUCTION STANDARDS DN100 DN2000 PN 10-16-25 Design EN 593 Connection End Connection EN 1092-2 ISO 7005-2 - Flanged EN 558 Series 14 DIN 3202 F4 Marking EN 19 Tests EN 12266-1 Corrosion Protection Electrostatic
More informationStainless Steel / Iron Valve ISO 9001
CAST IRON GATE VALVE CLASS 125 NON-RISING STEM. (N.R.S.) STEM: SS410 (BRASS / SS304) MODEL: CI-12N (CI-12N/CI-2NS) CAST IRON GATE VALVE CLASS 125 OUTSIDE SCREW AND YOKE. STEM: SS410 (BRASS / SS304) MODEL:
More informationBUTTERFLY VALVES, BFV TYPE
BUTTERFLY VALVES, BFV TYPE In 94, our journey into the business of repairing valves and industrial instrumentation began. That journey has led us to represent and service well known American brands and
More informationMaterials : Ductile iron EN GJS body, EPDM seat
Certificate 3.1 Size : Ends : Min Temperature : Max Temperature : DN 32 to 1400 mm Between flanges PN10/16 and Class 150 (PN20) - 20 C + 110 C Max Pressure : 16 Bars up to DN300 Specifications : Long neck
More informationBS 1452 Gr Gr. 420/ Gr. 420/ AB2 304 C C S S S S16. E mm
WAFER TYPE BUTTERFY VAVE SPECIFICATION FOR BS EN 1092-2 PN10 / PN16 FANGE MOUNTING FACE-TO-FACE DIMENSION TO ISO 5752 / BS 5155 / BS EN 593 EVER / WORM GEAR OPERATOR PRESSURE / TEMPERATURE RATINGS BFV-WB
More information516509_tabs 11/16/10 4:55 AM Page 1 FIRE HYDRANTS
Date Printed: November 2010 FIRE HYDRANTS or Tyton (6"),6, or 8" A EDDY FIRE HYDRANTS PARTS LIST WORKING PRESSURE: 150 PSI Note: Discontinued For Reference Only 350 PSI Working Pressure
More informationTechnical changes kept in reserve WAFER STYLE KNIFE GATE VALVE. DN 50 to DN 250: 10 kg/cm² DN 300 to DN 400: 6 kg/cm²
WAFER STYLE KNIFE GATE VALVE The A model knife gate is an uni-directional wafer valve designed for general industrial service applications. The design of the body and seat assures non-clogging shut off
More informationVALVES 5
info@ayvaz.com www.ayvaz.com GLOBE VALVES GV-16, GV-25, GV-40 GV-16 GV-25 GV-40 GG-25 Cast Iron GSC-25 Cast Steel GSC-25 Cast Steel Seat Stainless Steel AISI 304 Stainless Steel AISI 304 Stainless Steel
More informationLEAD FREE * LFM115 (Globe) LFM1115 (Angle)
ES-ACV-SB-LFM115_LFM1115 LEAD FREE * Pressure Reducing Control Valve Schematic Throttles to reduce high upstream pressure to constant lower downstream pressure Reducing setpoint is adjustable 2 (AOS) P/L
More informationMaterials : Cast iron or Stainless steel
Certificate 3.1 Size : Ends : Min Temperature : Max Temperature : DN 50 to DN 800 Between flanges PN10-10 C for NBR seat ( -15 C for EPDM ) + 90 C for NBR seat ( + 110 C for EPDM ) Max Pressure : 10 Bars
More informationBALL VALVES BUTTERFLY VALVES GLOBE VALVES GATE VALVES CHECK VALVES KNIFE VALVES Y STRAINERS ACTUATION BALL VALVES SS2020N-300 2 PIECE FLANGED ANSI 300 BALL VALVE Firesafe Certified Full Bore TMF1600 seats
More informationButterfly valves. Introduction. Made of ductile cast iron
Made of ductile cast iron Introduction The portfolio of valves supplied by Keulahütte GmbH in Krauschwitz is rounded off by butterfly valves and check valves, which have been designed according to international
More informationMaterials : Ductile iron body EN GJS
Certificate 3.1 Size : Ends : Min Temperature : Max Temperature : DN 32 to 600 mm Between flanges PN10/16, Class 150 and JIS10K* - 10 C + 110 C Max Pressure : 16 Bars up to DN300 (10 bars over) Specifications
More informationGENERAL CATALOGUE Catalogue 2013
GENERAL CATALOGUE Catalogue 2013 Company Profile GALA - Extends Business on a Global Perspective. GALA company offers a wide range of products and systems in the field of valves, piping, and seismic isolation
More informationConcentric butterfly valves
Lug Between flanges PN10/16 1135 Lever Disc GGG40 nickel plated / Seat EPDM.../10: flanges PN10.../16: flanges PN16 DN 40 50 65 80 100 125 150 200/10 200/16 250/10 250/16 300/10 300/16 16 16 16 16 16 16
More informationOil safety valve 141 Flame arrester 143 Air release valve for reservoirs 145 Reparation of valves, pumps and other valves 148
PRODUCT CATALOGUE 2 History 4 Products Gate valves Flat 13 Oval 25 Round 41 Knife 53 Butterfly valves Double eccentric 63 Triple eccentric 81 Turbine inlet valves 85 Non-return valve Swing check valves
More informationLUG BUTTERFLY VALVE PN10/16
LUG BUTTERFLY VALVE PN10/16 Model/Ref: 1133 www.lauridsenindustri.com Size : Ends : Min Temperature : Max Temperature : DN 40 to DN 600 Between flanges ISO PN10/16-10 C + 110 C ( 130 C C temporarily) Max
More informationMADE OF STAINLESS... Certificate 3.1
MADE OF STAINLESS... Certificate 3.1 Size : Ends : Min Temperature : Max Temperature : DN 50 to DN 300 Between flanges PN10-10 C + 90 C Max Pressure : 10 Bars up to DN 200 Specifications : Rising rotating
More informationBrown University Revised August 3, 2012 Facilities Design & Construction Standards SECTION HVAC&R VALVES
SECTION 23 05 23 HVAC&R VALVES PART 1 - GENERAL 1.1 SUMMARY: A. Section includes valves for building services piping. 1.2 GENERAL VALVE APPLICATION REQUIREMENTS: A. Provide valve handle extensions that
More informationUNI-DIRECTIONAL KNIFE GATE VALVE
UNI-DIRECTIONAL KNIFE GATE VALVE The MU-CYL model knife gate is a Uni-directional valve, equipped with automatic or manual driver, that by its loose elastomeric clamping ring design (tight version) ensures
More informationMaterials : Ductile iron EN GJS 500-7, PTFE seat
Seat Certificate 3.1 Size : Ends : Min Temperature : Max Temperature : DN 40 to 300 mm Between flanges PN10/16-25 C + 200 C Max Pressure : 16 Bars up to DN150 Specifications : Long neck for isolation Lug
More informationV A L V E S. rice List of. Controlling fluids is our expertise TERMS & CONDITIONS : An ISO:9001 Co. PRICE LIST NO. : JMW / 3 0 W.E.
V A L V E S Controlling fluids is our expertise TERMS & CONDITIONS : This cancels our all previous issues. All prices are Ex. works, Jalandhar. Excise duty will be charged extra as applicable (presently
More informationHOPPER SHAPE KNIFE GATE VALVE
HOPPER SHAPE KNIFE GATE VALVE The C model knife gate is a uni-directional wafer valve designed for industrial bulk handling service applications (powdered and granular products). makes it ideal for use
More informationTHROUGH CONDUIT KNIFE GATE VALVE. OBX 09/11 2nd EDITION Revision 1 Reserves the right to change specifications without notice
THROUGH CONDUIT KNIFE GATE VALVE The model knife gate is a bi-directional wafer valve designed for media with high consistency. The double seat design assures a non-clogging shut off on either normal or
More informationVarious coating technologies including epoxy, Rilsan, enamel, give the ability to supply high quality protection for special applications.
Gate Valve At Raphael we believe simplicity is the key to a quality product. We strive to deliver an efficient solution that will assure your peace of mind and meet your expectations. Raphael Valves Industries
More informationRESILIENT SEATED BUTTERFLY VALVES. Howell Valve & Automation. Toll Free: Howellvalve.com
RESILIENT SEATED BUTTERFLY VALVES Howell Valve & Automation Toll Free: 1-888-469-3557 Howellvalve.com TABLE OF CONTENTS Description Page Index 2 Resilient Standard Features 3 ST Boot Series with BUNA-N
More informationAKZG50E4SGL. Materials : Ductile iron EN GJS 500-7, food silicone seat. *the installation defects and wear defects are not covered by the guarantee
AKZG50E4SGL Certificate 3.1 Size : Ends : Min Temperature : Max Temperature : DN 32 to 600 mm Between flanges PN10/16 and Class 150 (PN20) - 30 C + 150 C Max Pressure : 16 Bars up to DN300 Specifications
More informationMaterials : Ductile iron body EN GJS
Certificate 3.1 Size : Ends : Min Temperature : Max Temperature : DN 32 to 600 mm Between flanges PN10/16, Class 150 and JIS10K* - 10 C + 110 C Max Pressure : 16 Bars up to DN300 (10 bars over) Specifications
More informationApproved Branded Traceable Fire Protection & Waterworks Valves
Approved Branded Traceable Fire Protection & Waterworks Valves (800) 766-0076 www.smithcooper.com Los Angeles, CA Atlanta, GA Vancouver, WA Chicago, IL AWWA C515 Compliant CONSIDER Your Options Tamper
More informationALC-3 BUTTERFLY VALVES NOMINAL PRESSURE NOMINAL SIZE MATERIALS CONNECTIONS DESIGN. ANSI Class PN DN
BUTTERFLY VALVES ALC-3 NOMINAL PRESSURE ANSI Class 150-600 PN 10-100 NOMINAL 2-80 DN 50-2000 MATERIALS Cast Iron Carbon Steel Low Alloy Steel CONNECTIONS Wafer Lugged Flanged Butt Weld DESIGN Eccentric
More informationData sheet Knife gate valve WB PN10 DN
Page: 1(7) Introduction The Stafsjö WB knife gate valve is a bi-directional seated valve with full bore. Its main applications are different liquids at water, waste water and biogas plants. The WB is designed
More informationMaterials : Ductile iron EN GJS body, PTFE seat
Certificate 3.1 Size : Ends : Min Temperature : Max Temperature : DN 32/40 to 300 mm Between flanges PN10/16 and Class 150 (PN20) - 25 C + 200 C Max Pressure : 16 Bars up to DN150 Specifications : Long
More informationWAFER STYLE KNIFE GATE VALVE
WAFER STYLE KNIFE GATE VALVE The EX(SER.10) model knife gate is an uni-directional wafer valve designed for general industrial service applications. The design of the body and seat assures non-clogging
More informationLEAD FREE * LFF115 (Globe) LFF1115 (Angle)
ES-ACV-SB-LFF115_LFF1115 LEAD FREE * Pressure Reducing Control Valve Schematics Throttles to reduce high upstream pressure to constant lower downstream pressure Reducing setpoint is adjustable 2 (AOS)
More information*the installation defects and wear defects are not covered by the guarantee
Size : Ends : Min Temperature : Max Temperature : DN 32 to 600 mm Between flanges PN10/16 and Class 150 (PN20) - 30 C + 150 C Max Pressure : 16 Bars up to DN300 Specifications : Long neck for isolation
More informationBV BAKIO Soft Sealing Gate Valve
TALIS in the process of innovation and continuous improvement has designed a new soft sealing gate valve named BAKIO. The process has been based on the development of the features that our customers perceive
More informationSize : Ends : Min Temperature : Max Temperature : Reinforced lug from DN200 to DN1400 MADE OF STAINLESS...
MADE OF STAINLESS... Reinforced lug from DN200 to DN1400 Size : Ends : Min Temperature : Max Temperature : DN 32 to 1400 mm Between flanges PN10/16-10 C ( with EPDM seat ) + 110 C ( with EPDM seat ) Max
More informationHOPPER SHAPE KNIFE GATE VALVE
HOPPER SHAPE KNIFE GATE VALVE The model knife gate is a uni-directional wafer valve designed for industrial bulk handling service applications (powdered and granular products). The special design of the
More informationWAFER STYLE KNIFE GATE VALVE
MODEL WAFER STYLE KNIFE GATE VALVE The model knife gate is an uni-directional wafer valve designed for general industrial service applications. The design of the body and seat assures non-clogging shut
More informationRef ALL POSITIONS CAST IRON CHECK VALVE PN16. Model/Ref:
Model/Ref: 363-366 www.lauridsenindustri.com Size : Ends : Min Temperature : Max Temperature : DN 50 to 600 Flanges R.F. ISO PN10/16-10 C + 130 C Max Pressure : 16 Bars up to DN300 ( 10 bars over ) Specifications
More informationF627 DOUBL DOUBLE EC E E C C E C N E TRI R C I BUTTER E F R LY L VA Y V LV L ES E BS EN 593
F627DOUBLE ECCENTRC BUTTERFLY VALVES BS EN 93 The Keystone Figure 627 PQ is a Bi-directional, double eccentric, resilient seated butterfly valve, available in double flanged and wafer configurations. Features:
More informationT he -A900 series of automatic control valves
A900 Automatic Control Valve T he -A900 series of automatic control valves are Basic Valves to provide hydraulically driven solutions to pressure, fl ow and level control applications. Features: Top and
More informationUNIJOINT is a company of. UNIJOINT Eurocoup Flange Adaptors & Couplings
UNIJOINT is a company of UNIJOINT Eurocoup Flange Adaptors & Couplings UNIJOINT For Challenging Pipe Connections UNIJOINT, established in 1992 in the Netherlands, is a company with a vast experience in
More informationHAWLE-specification water
water GÜTEZEICHEN GÜTEZEICHEN GÜTEZEICHEN GÜTEZEICHEN GÜTEZEICHEN GÜTEZEICHEN GÜTEZEICHEN GÜTEZEICHEN GÜTEZEICHEN GÜTEZEICHEN GÜTEZEICHEN GÜTEZEICHEN HAWLE - Epoxy Powder-Coating High quality corrosion
More informationSeries 800 AWWA Butterfly Valves
Series 800 AWWA Butterfly Valves Valve and Gate Group A Century of Experience GA valves are known for long term reliability in the most demanding water and wastewater applications. Whether a simple check
More informationHigh quality valves for wastewater treatment
High quality valves for wastewater treatment Your long-term partner AVK INTERNATIONAL A/S Full commitment from your long-term partner AVK has been in the valve business for more than 40 years. First AVK
More informationDescription. Functions. Technical data. Applications. Tests. Level control float valve, enabling the control of the filling level.
Level control float valve, enabling the control of the filling level. Description For general information concerning the operation of a Hydrobloc control valve, please consult our general manual (series
More informationCHECK VALVES. MOUNTING: - flow direction marked with arrow on body; - mounting position in conformity with the technical sheet recommendation.
CHECK VALVES RR page 1 R MAIN APPLICATIONS: Transport and distribution of : - cold and hot industrial water; - saturated vapours; - petroleum products; on condition that the compatibility regarding the
More informationKEYSTONE. The HiLok high performance butterfly valves offer efficient, bidirectional sealing across a wide spectrum of service conditions.
KEYSTONE The HiLok high performance butterfly valves offer efficient, bidirectional sealing across a wide spectrum of service conditions. Features Cast on ISO top plate. Long neck for insulation service.
More informationwith the specific application. Always read and understand the installation
Worldwide Contacts www.tyco-fire.com Resilient-Seated Gate Valves Outside Screw and Yoke General Description TYCO Resilient-Seated Gate Valves are used in Fire Protection Systems for on/off operation.
More informationGate valve S38 PN , DN , T max : 540 C
Gate valve S38 40-100, DN 40 400, T max : 540 C Shut off gate valve with outsidescrew, rising stem, non-rising hand wheel, with bolted bonnet, with flanges or with butt weld ends, flexible or split wedge,
More informationMaterials : Ductile iron body EN GJS
Size : Ends : Min Temperature : Max Temperature : DN 40 to 600 mm Between flanges PN10/16-10 C + 110 C Max Pressure : 16 Bars up to DN300, 10 bars over Specifications : Long neck for isolation Ductile
More informationOPTIMAL VALVE SOLUTIONS PRODUCT PROGRAM
FLOW CONTROL OPTIMAL VALVE SOLUTIONS PRODUCT PROGRAM World Valve Wouter Witzel 1 FLOW CONTROL l PRODUCTS CONTENT: FLOW CONTROL 4-5 BUTTERFLY VALVES 6-7 BALL VALVES 8 GATE- AND GLOBE VALVES 9 KNIFE GATE
More informationMaterials : Ductile iron body EN GJS
Size : Ends : Min Temperature : Max Temperature : DN 40 to 600 mm Between flanges PN16 up to DN300-10 C + 110 C Max Pressure : 16 Bars up to DN300, 10 bars over Specifications : Long neck for isolation
More informationSize : Ends : Min Temperature : Max Temperature : MADE OF STAINLESS... MADE OF STAINLESS...
MADE OF STAINLESS... Size : Ends : Min Temperature : Max Temperature : DN 32 to 600 mm Between flanges PN10/16 and Class 150 (PN20) - 10 C + 110 C Max Pressure : 16 Bars up to DN300 Specifications : Long
More informationVálvulas AG1-BD BUTTERFLY VALVE. From 1970 close to our clients
Válvulas AG1-BD BUTTERFLY VALVE From 1970 close to our clients Technical datasheet Butterfly valve.. Edition 2.5 06/2017 ANGODOS Since 1970 ANGODOS has been technological leader in valves industry, manufacturing
More informationTrunnion Ball Valve Catalogue
Trunnion Ball Valve Catalogue Introduction "Fusion" is the registered trademark of Archmetal Industries, a member of the Fortune Group. * The Fortune Group is a world class producer of a full range of
More informationAWWA C504 - BUTTERFLY VALVES
License Number 6D-1724 AWWA C504 - BUTTRFLY VALVS License Number 6D-1724. Gate Valves Knife Gate Valves Ball Valves Check Valves Plug Valves Air Release Valves Oil and Gas Water and Sewage, Chemicals Paper
More informationMaterials : Cast iron or stainless steel body
Certificate 3.1 Size : Ends : Min Temperature : Max Temperature : DN 40 to 600 Between flanges PN10/16 or PN25-10 C + 90 C for NBR, 110 C for EPDM,180 C for FKM Max Pressure : 10 to 16 Bars ( according
More informationBI-DIRECTIONAL KNIFE GATE VALVE
BI-DIRECTIONAL KNIFE GATE VALVE The model knife gate is a bi-directional valve designed for general industrial service applications. The design of the body and seat assures non-clogging shut off on suspended
More informationUNIVERSITY SERVICES ANNEX James Madison University Harrisonburg, Virginia State Project Code: Architect s Project Number:
SECTION 230523 GENERAL DUTY VALVES FOR HVAC PIPING PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Provisions of the Contract and of the Contract Documents apply to this Section. 1.2 DEFINITIONS A. The following
More information