HL (AZH) Limit Switches
|
|
- Rudolph Palmer
- 5 years ago
- Views:
Transcription
1 COMPACT SIZE LIMIT SWITCHES HL (AZH) Limit Switches Wide selections of actuators, terminals and bodies to meet any application Excellent environmental resistance Die casting caseiec IP67 Plastic caseiec IP64 Highly reliable operation Bifurcated contact (Au clad) suitable for low-level circuit control Connector type for easy installation Cost-effective plastic case also available Compact design good for small mounting space 17% less mounting space compared with ML (AZ7) Limit switch Conforms to UL/CSA TÜV standards PRODUCT TYPE 1. Limit Switches Actuator Type Push plunger Roller plunger Cross roller plunger Panel mount push plunger Panel mount roller plunger Panel mount cross roller plunger Sealed push plunger Sealed roller plunger Sealed cross roller plunger Short roller lever Roller lever One-way short roller lever One-way short lever Flexible 2. Accessories Product Cable connector cord Die casting case Plastic case Screw terminal Connector type Screw terminal Standard Bifurcated Bifucated contact Without LED With LED Standard Bifurcated Common to panel mount push plunger AZH01 AZH1201 Common to panel mount roller plunger AZH02 AZH1202 Common to panel mount cross roller plunger AZH0 AZH120 AZH201 AZH221 AZH21 AZH2116 AZH1 AZH121 AZH202 AZH222 AZH22 AZH2216 AZH2 AZH122 AZH20 AZH22 AZH2 AZH216 AZH AZH12 AZH2011 AZH2211 AZH211 AZH21116 AZH11 AZH1211 AZH2012 AZH2212 AZH212 AZH21216 AZH12 AZH1212 AZH201 AZH221 AZH21 AZH2116 AZH1 AZH121 AZH2041 AZH2241 AZH241 AZH24116 AZH41 AZH1241 AZH2021 AZH2221 AZH221 AZH22116 AZH21 AZH1221 AZH2044 AZH2244 AZH244 AZH24416 AZH44 AZH1244 AZH2024 AZH2224 AZH224 AZH22416 AZH24 AZH1224 AZH66 AZH1266 Specifications Pin arrangement Type Core No. Color of wire Conductor Length of cable Straight Brown White mm 2 m AC 4 Blue (Circumference: ft Angle Black dia.) Application All connector type Part No. AZH211 AZH21 FOREIGN STANDARDS Standard UL CSA TÜV Applicable product File no.: E Ratings: Normal load: 5 A, 250 VAC ( 5 cycles), Pilot Duty B00 Minute load: 0.1 A, 0 VDC Certified products: All models File no.: LR550 Ratings: Normal load: 5 A, 250 VAC, Pilot Duty B00 Minute load: 0.1 A, 0 VDC Certified products: All models File no.: Resin case type J Die-cast case type J Ratings: Normal load for resin case type: AC 15 2A/250V~, DC 12 1A/0V... Minute load for resin case type: DC A/0V... Normal load for die-cast case type: DC 12 1A/0V... Minute load for die-cast case type: DC A/0V... Certified products: All models except those with LED lamps Part No. Order using the standard part number. Place a CE at the end of the part number when ordering. 14
2 SPECIFICATIONS 1. Ratings Load Rated control voltage 125 V AC 250 V AC V DC 14 V DC 24 V DC 0 V DC 125 V DC 250 V DC 2. Characteristics Contact arrangement Contact resistance Contact material Insulation resistance Initial breakdown voltage Shock resistance Free Full operating Vibration resistance Mechanical life Electrical life Ambient temperature Ambient humidity Max. switching frequency. characteristics Die cast case Actuator Plastic case Characteristics Panel mount push plunger Panel mount roller plunger Panel mount cross roller plunger Sealed push plunger Sealed roller plunger Sealed cross roller plunger Short roller lever Roller lever One-way short roller lever One-way short lever Actuator Characteristics Push plunger Roller plunger Cross roller plunger Panel mount push plunger Panel mount roller plunger Panel mount cross roller plunger Sealed push plunger Sealed roller plunger Sealed cross roller plunger Short roller lever Roller lever One-way short roller lever One-way short lever Flexible Standard type Bifurcated type Resistive Lamp Inductive Motor Without LED With LED Resistive 5 A 1.5 A A 2 A 1 A 0.1 A 5 A 1.5 A A 1 A A 5 A 5 A 1.5 A 1.5 A 0.1 A 0.1 A 5 A A 0.25 A 1.5 A 0.05 A 0.0 A 0.1 A 0.1 A Notes: 1) Parameter of inductive load: AC power factor: Min. 0.4; DC time constant: Max. 7 ms. 2) Lamp load generates times of inrush current. ) Motor load generates 6 times of inrush current. Standard type Bifurcated type Screw terminal Screw terminal Connector type 1 Form C 1 Form C (Bifurcated contact) Initial: Max. 15 mω Initial: Max. 0 mω Initial: Max. 150 mω Silver alloy Gold clad Initial: Min. 0MΩ (at 500 V DC) 1,000 Vrms for 1 min. between non-consecutive terminals 1,500 Vrms for 1 min. between dead metal parts and terminals 1,500 Vrms for 1 min. between ground and terminals Max. 9 m/s 2 { G} Max. 294 m/s 2 {0 G} to 55 Hz (Double amplitude for max. 1.5 mm) 7 (at 120 cpm) 5 5 (at 20 cpm, 5 A 250 V AC resistive load) 5 5 (at 20 cpm, 0.1 A 125 V AC resistive load) to +0 C +14 to +176 F Max. 95% R.H. Max. 120 cpm force, max. Release force, min. max. max. 1.5 ().0 (.1) ±0. (±.01) 1.5 ().0 (.1) 2.4±0. (.921±.01) 1.5 ().0 (.1) 2.4±0. (.921±.01) 1.5 ().0 (.1) 0.0±0. (1.1±.01) 1.5 ().0 (.1) (1.626±.01) 1.5 ().0 (.1) (1.626±.01).92 (400) 0.7 (0) 2.0 (.079) 0. (.012) 2.45 (250) 0.9 (40) 0.6 (.024) 7.0 (.276).92 (400) 0.7 (0) 2.0 (.079) 0. (.012) (1.50±.01) 2.45 (250) 0.9 (40) 0.6 (.024) 7.0 (.276) (1.50±.01) force, max. Release force, min. max. HL (AZH) max. 5. (600) 0.9 (0) 1.5 ().0 (.1) 25.4±0. (1.000±.01) 5. (600) 0.9 (0) 1.5 ().0 (.1) 1.4±0. (1.26±.01) 5. (600) 0.9 (0) 1.5 ().0 (.1) 1.4±0. (1.26±.01) 5. (600) 0.9 (0) 1.5 ().0 (.1) ±0. (±.01) 5. (600) 0.9 (0) 1.5 ().0 (.1) 2.4±0. (.921±.01) 5. (600) 0.9 (0) 1.5 ().0 (.1) 2.4±0. (.921±.01) 5. (600) 0.9 (0) 1.5 ().0 (.1) 0.0±0. (1.1±.01) 5. (600) 0.9 (0) 1.5 ().0 (.1) (1.626±.01) 5. (600) 0.9 (0) 1.5 ().0 (.1) (1.626±.01).92 (400) 0.7 (0) 2.0 (.079) 0. (.012) 2.45 (250) 0.9 (40) 0.6 (.024) 7.0 (.276).92 (400) 0.7 (0) 2.0 (.079) 0. (.012) (1.50±.01) 2.45 (250) 0.9 (40) 0.6 (.024) 7.0 (.276) (1.50±.01) 0. (90) 0.0 (1.1) 20.0 (.77)0 15
3 4. Performance data for EN Item Rated insulated voltage Impulse withstand voltage Switching excess voltage Rated closed thermocurrent Conditional short-circuit current Short-circuit protection Protective construction Degree of contamination Plastic case Standard Plastic case Bifurcated Die casting case Standard Die casting case Bifurcated 250V AC 250V AC 0V DC 0V DC 2.5kV 2.5kV 1.5kV 1.5kV 2.5kV 0.kV 0.kV 0.kV 5A 1A 5A 1A 0A 0A 0A 0A A Fuse A Fuse A Fuse A Fuse IP64 (switch) IP64 (switch) IP54 (terminal) IP54 (terminal) IP67 IP67 OUTPUT CIRCUIT Wiring diagram 1) Screw terminal type Internal circuit 2) LED wired type Lamp lighting circuit COM LED resistance 4 COM Note: Since LED is connected to side, the polarity of the load shall be + for CONTACTS Screw terminal type Plunger type Lever type Connector type COM The terminal cover can be mounted in both directions. COM The terminal cover can be mounted in both directions. Contact No Terminals Color of leadwire Brown White COM Blue Black LED rating Leakage Internal Rating current resistance 24 V DC 1.5 ma kω The leakage current changes depends on the resistance of load connected in parallel. Protective construction IEC standard Die cast case Plastic case IP64 IP67 16
4 DIMENSIONS Die cast case 1. Screw terminal Panel mount push plunger AZH201 AZH ±0..5 ± dia..165 dia. Thickness.1 dia. mm inch General tolerance: ±0.4 ±.016 Stainless steel max. HL (AZH) 1.5 ().0 (.1) ±0. (±.01) Panel mount roller plunger AZH202 AZH ±0..921± dia dia. width Thickness max. 1.5 ().0 (.1) 2.4±0. Panel mount cross roller plunger AZH20 AZH22 2.4±0..921± dia dia. width Thickness max. 1.5 ().0 (.1) 2.4±0. Sealed push plunger dia. Stainless steel AZH2011 AZH ±0. 1.1± dia..165 dia max. 1.5 ().0 (.1) 0.0±0. (1.1±.01) 17
5 Sealed roller plunger mm inch General tolerance: ±0.4 ± dia. width AZH2012 AZH ± dia..165 dia max. 1.5 ().0 (.1) (1.626±.01) Sealed cross roller plunger dia. width AZH201 AZH ± dia..165 dia max. 1.5 ().0 (.1) (1.626±.01) Short roller lever AZH2041 AZH dia R24.4 R max ± dia. width max..92 (400) 0.7 (0) 2.0 (.079) 0. (.012) Roller lever AZH2021 AZH dia R4.9 R max ±.01 1 dia. width max (250) 0.9 (40) 0.6 (.024) 7.0 (.276)
6 One-way short roller lever mm inch General tolerance: ±0.4 ±.016 R29. R max dia. width AZH2044 AZH dia ± max..92 (400) 0.7 (0) 2.0 (.079) 0. (.012) (1.50±.01) One-way roller lever AZH2024 AZH dia R47.1 R max ±.01 1 dia. width max (250) 0.9 (40) 0.6 (.024) 7.0 (.276) (1.50±.01) 2. Connector type Panel mount push plunger AZH21 AZH2116 ±0. ± dia..165 dia Thickness dia. Stainless steel max. 1.5 ().0 (.1) ±0. (±.01) Panel mount roller plunger AZH22 AZH ±0..921± dia..165 dia dia. width Thickness max. 1.5 ().0 (.1) 2.4±0.
7 Panel mount cross roller plunger mm inch General tolerance: ±0.4 ± dia. width Appropriate total-travel range 2.4±0. Thickness.1.921± AZH2 AZH dia..165 dia max. 1.5 ().0 (.1) 2.4±0. (.921±.01) Sealed push plunger dia. Stainless steel AZH211 AZH ±0. 1.1± dia..165 dia max. 1.5 ().0 (.1) 0.0±0. (1.1±.01) Sealed roller plunger dia. width AZH212 AZH ± dia..165 dia max. 1.5 ().0 (.1) (1.626±.01) Sealed cross roller plunger dia. width AZH21 AZH ± dia..165 dia max. 1.5 ().0 (.1) (1.626±.01) 20
8 Short roller lever mm inch General tolerance: ±0.4 ±.016 AZH241 AZH24116 Roller lever dia..165 dia R24.4 R max ± dia. width max. HL (AZH).92 (400) 0.7 (0) 2.0 (.079) 0. (.012) AZH221 AZH dia..165 dia R4.9 R max ± dia. width max (250) 0.9 (40) 0.6 (.024) 7.0 (.276) One-way short roller lever AZH244 AZH dia..165 dia R29. R max ± LED dia. width max..92 (400) 0.7 (0) 2.0 (.079) 0. (.012) (1.50±.01) One-way roller lever AZH224 AZH dia R47.1 R LED max ±.01 1 dia. width max (250) 0.9 (40) 0.6 (.024) 7.0 (.276) (1.50±.01) 21
9 Plastic case Push plunger 16 dia..60 dia. mm inch General tolerance: ±0.4 ±.016 AZH01 AZH ± ± dia..5 (5.9) max. 5. (600) 0.9 (0) 1.5 ().0 (.1) 25.4±0. (1.000±.01) Roller plunger 1 dia. width dia..60 AZH02 AZH ± ± dia..165 dia. (5.9) max. 5. (600) 0.9 (0) 1.5 ().0 (.1) 1.4±0. (1.26±.01) Cross roller plunger 1 dia. width dia..60 AZH0 AZH ± ± dia..165 dia. (5.9) max. 5. (600) 0.9 (0) 1.5 ().0 (.1) 1.4±0. (1.26±.01) Panel mount push plunger AZH1 AZH121 ±0. ± dia..5 (5.9) Thickness dia. max. 5. (600) 0.9 (0) 1.5 ().0 (.1) ±0. (±.01) 22
10 Panel mount roller plunger mm inch General tolerance: ±0.4 ±.016 AZH2 AZH ±0..921± dia..165 dia. (5.9) 1 dia. width Thickness max. 5. (600) 0.9 (0) 1.5 ().0 (.1) 2.4±0. (.921±.01) Panel mount cross roller plunger AZH AZH12 2.4±0..921± dia..165 dia. (5.9) 1 dia. width Thickness max. 5. (600) 0.9 (0) 1.5 ().0 (.1) 2.4±0. (.921±.01) Sealed push plunger dia. AZH11 AZH1211 0±0. 1.1± dia..165 dia. (5.9) max. 5. (600) 0.9 (0) 1.5 ().0 (.1) 0.0±0. (1.1±.01) Sealed roller plunger 1 dia. width AZH12 AZH ± dia..165 dia. (5.9) max. 5. (600) 0.9 (0) 1.5 ().0 (.1) (1.626±.01) 2
11 Sealed cross roller plunger mm inch General tolerance: ±0.4 ± dia. width AZH1 AZH ± dia..165 dia. (5.9) max. 5. (600) 0.9 (0) 1.5 ().0 (.1) (1.626±.01) Short roller lever AZH41 AZH dia max ± R24.4 R dia. width Nylon roller max..92 (400) 0.7 (0) 2.0 (.079) 0. (.012) Roller lever AZH21 AZH dia ± R4.9 R max dia. width Nylon roller max (250) 0.9 (40) 0.6 (.024) 7.0 (.276) One-way short roller lever AZH44 AZH dia max ± R29. R dia. width Nylon roller max..92 (400) 0.7 (0) 2.0 (.079) 0. (.012) (1.50±.01) 24
12 One-way roller lever mm inch General tolerance: ±0.4 ±.016 AZH24 AZH dia ± R47.1 R max dia. width Nylon roller max (250) 0.9 (40) 0.6 (.024) 7.0 (.276) (1.50±.01) Flexible (41.5) (1.64) 4.2± ± AZH66 AZH1266 (.2) (.717) dia..165 dia. (5.9), min. Overtravel, max. 0. (90) 0.0 (1.1) 20.0 (.77) Cable connected cord Straight type 6.5 dia..2 dia. (15) (.591) 14 dia..551 dia (5) (1.7) (4) (.157) AZH211 AC type Angle type 14 dia..551 dia dia..2 dia. (15) (.591) AZH AC type (5) (1.7) (4) (.157) 25
13 MOUNTING METHOD Die cast case 1. Side mounting (all types) M4 screw is used for mounting on side. Mount it firmly with washer. Mounting torque is 1.7 to 1.57 N.m. Remove the hexagonal nut when plunger type is used in side mounting. Side mounting hole dimensions 2-4. dia. or M4 screw hole dia. 2. Panel mounting (Panel plunger type) When the panel mounting type is fixed on the panel, the torque of hexagonal nut is set under 7.4 N.m. Panel mounting hole dimensions 1±0.2 dia..571±.00 dia. Plastic case Side mounting (all types) M4 screw is used for mounting on side. Mount it firmly with washer. Mounting torque is 1. to 1.47 N.m. Side mounting hole dimensions 2-4. dia. or M4 screw hole dia. APPLICABLE WIRE (For screw terminal) of the lead wire is applicable for 6 dia. to dia. Electric wire name Vinyl cabtyre cord (VCTF) Wire strand 2-wire -wire Applicable wire Finished Conductor outside diameter 0.75 mm mm mm mm mm mm dia. 7.4 mm dia..0 mm dia. 7.0 mm dia. 7. mm dia. WIRING (For screw terminal) M small binding screw is used as a terminal screw. When wiring, don t connect the lead wire to the terminal directly. Fasten the crimped terminals securely applying a tightening torque of 0.20 to 0.29 N.m. Approx. 45 Approx Approx. 0 Approx. 1.1 Approx. 15 Approx..591 Take note the terminal arrangement is different between plunger type and lever type. The arrangement of and is reversed. COM terminal Plunger type terminal Lever type terminal COM terminal terminal terminal CONNECTOR TYPE 1) The cord outlet direction is interchangeable. Refer to How to change the cord outlet direction. 2) Do not remove the connector over 50 times. ) Wiring diagram as shown below. 4) When the angle type of connector cord is used, the cord outlet direction is as follows. Cord outlet direction (Right side) Contact No. 2 Contact No. 4 COM Contact No. Contact No. of connector 2 1 Cord outlet direction (Left side) 4 Note: Contact No. 1 is not in use. 26
14 HOW TO CHANGE THE CORD OUTLET DIREC- TION FOR CONNECTOR TYPE The cord outlet direction is interchangeable both right and left sides. The direction of connector cord is set to the right when it is shipped. When it is used left side direction, follow the next procedure. Cord outlet direction (Right side) Step 1 Fitting metal Body Step 2 HL (AZH) Cramp Terminal cover Push down the fitting metal while pulling it horizontal direction. Step Turn the terminal cover at an angle of 0 degree. Follow the procedure. Do not pull the terminal cover. Do not rotate the terminal cover many times. Do not loosen the terminal screw. Cord outlet direction (Left side) Step 4 Attention Attention Seal rubber Do not put the lead wire between terminal cover and body. Put the seal rubber at the right place. Press up the terminal cover. Confirm the fitting metal is on tightly. If it is loosen, it might be cause of the trouble. INDICATOR LIGHTING CIRCUIT (Connector type only) 1) See the circuit diagram. 2) Voltage across the terminal No. and No. 4 shall not exceed 24 V DC, with the indicated polarity in the circuit diagram. ) The LED is turned on when the switch is at a free. The LED is turned off when the switch operates. 4) Applicable power source is 24 V DC. Use it with care on leakage current. The leakage current is approx. 1.5 ma at 24 V DC. Internal circuit Switch LED Contact No. 2 Load Contact No. 4 + Resistance Contact No. 27
15 CAUTIONS Die cast case 1) Do not expose HL limit switch to hot water (over 60 C 140 F) and in a water vapor environment. 2) Avoid the place where organic solvents, strong acid, strong alkali liquid and vapor may attach to the products directly. Prevent using the HL limit switch in place where inflammable or corrosive gas will be generated. ) Do not change the operating by bending the actuator. 4) If OT is too big, the life of limit switch will be shortened by switching friction. Use it with enough margin of OT. 70% of OT standard value will be good. 5) Attach the terminal cover securely to the body with the metal stop latch to the projection of the body. 6) Confirmation test in the actual application is highly recommended. 7) Do not use the switch in a silicon atmosphere. Care should be taken where organic silicon rubber, adhesive, seling material, oil, grease or lead wire generates silicon. Plastic case 1) Do not use in water or oil. Do not place the switch where it is always exposed to water or dust splash. 2) Do not expose HL limit switch to hot water (over 60 C 140 F) and in a water vapor environment. ) Avoid the place where organic solvents, strong acid, strong alkali liquid and vapor may attach to the products directly. Prevent using the HL limit switch is place where inflammable or corrosive gas will be generated. 4) Do not change the operating by bending the actuator. 5) If OT is too big, the life of limit switch will be shortened switching friction. Use it with enough margin of OT. 70% of OT standard value will be good for use. 6) Attach the terminal cover securely to the body to the extent you can identify the clicking or locking sound. 7) A confirmation test in the actual application is highly recommended. ) Do not use the switch in a silicon atmosphere. Case should be taken where organic silicon rubber, adhesive, sealing material, oil, grease or lead wire generates silicon. 2
HL (AZH) LIMIT SWITCHES
COMPACT SIZE LIMIT SWITCHES LIMIT SWITCHES U L PRODUCT TYPE 1. Limit Switches Actuator Type Push plunger Roller plunger Cross roller plunger Panel mount push plunger Panel mount roller plunger Panel mount
More informationHL (AZH) Limit Switches
COMPACT SIZE LIMIT SWITCHES HL (AZH) Limit Switches Compact, high-performance limit switch with superior environmental resistance. Broad lineup covers from die casting cases to economical plastic cases.
More informationVL (AZ8) Mini Limit Switches
COMPACT SIZE LIMIT SWITCHES VL (AZ8) Mini Limit Switches A compact and accurate vertical limit switch. Type with a lamp which makes maintenance convenient; either a neon AC powered lamp or an LED DC powered
More informationSL (AZ3) Micro Limit Switches
SUBMINIATURE SIZE LIMIT SWITCHES SL (AZ3) Micro Limit Switches Quickly upgraded to limit switches with lamps by mounting an LED lamp socket. Rubber cover type (roller ) Compliance with RoHS Directive FEATURES
More informationVL (AZ8) Limit Switches
COMPACT SIZE LIMIT SWITCHES Limit Switches A compact and accurate vertical limit switch. Type with a lamp which makes maintenance convenient; either a neon AC powered lamp or an LED DC powered lamp. With
More informationDL (AZD1) Mini Limit Switches
COMPACT SIZE LIMIT SWITCES DL (1) Mini Limit Switches (with forced contact opening mechanism) An economic compact limit switch equipped with a forced contact opening mechanism and excellent environment
More informationVL (AZ8) Limit Switches
COMPACT SIZE LIMIT SWITCHES VL (AZ8) Limit Switches A compact and accurate vertical limit switch. Switches with indicator lamp available for convenient maintenance; either a neon AC powered lamp or an
More informationVERTICAL TYPE LIMIT SWITCHES (INCLUDES LAMP TYPE)
VERTICAL TYPE LIMIT SWITCHES (INCLUDES LAMP TYPE) Limit Switches General use vertical limit switch. Type with a lamp which makes maintenance convenient; either a neon AC powered lamp or an LED DC powered
More informationModel Number Structure
Small Sealed Switch D4E-@N Slim and Compact Switch with Better Seal and Ensuring Longer Service Life than D4E Flat springs with an improved lever ratio of the built-in switch ensure smooth snap action
More informationLife PERFORMANCE Catalog listing Standards Structure Electrical performance Mechanical performance Ambient operating conditions Recommende tightening
SPATTER-GUARDED SWITCHES Model LS Effective countermeasures against the adhesion of spatter. UL/CSA/GB(CCC marking)-approved. (excluding some models) ORDER GUIDE Actuator Name Roller lever type Shape Max.
More informationLimit Switches Matsushita Electric Works, Ltd. Matsushita Electric Works, Ltd. Limit Switches ARCT1B272E Please contact...
06 07 Limit Switches Limit Switches 06 07 Please contact... ARCT1B272E 200609-1YT These materials are printed on ECF pulp. These materials are printed with earth-friendly vegetable-based (soybean oil)
More informationSmall Limit Switch D4V
Small Limit Switch DV Compact Vertical Models Sized for Asian Standards Compact new design approximately / the size of OMRON vertical Limit Switches. Structure enables the terminal section to be fully
More informationEnclosed Switch. Ordering Information. Economical, High Utility Enclosed Switch. Model Number Legend D4MC- List of Models
Enclosed Switch Economical, High Utility Enclosed Switch High precision and long life (10,000,000 mechanical operations) through employment of the moving spring used in OMRON Z Basic Switch. Sealed with
More informationQL (AZ4) Limit Switches
SUMINITURE SIZE LIMIT SWITCHES QL (Z4) Limit Switches High precision micro limit switches with excellent environmental protection. Quickly upgraded to limit switches with lamps by mounting an LED lamp
More informationQL (AZ4) Micro Limit Switches
SUMINITURE SIZE LIMIT SWITCHES QL (Z4) Micro Limit Switches High precision micro limit switches with excellent environment proofing Quickly upgraded to limit switches with lamps by mounting an LED lamp
More informationSafety Limit Switch
Safety Limit Switch D4B-@N CSM_D4B-_N_DS_E_5_1 Snap-action contact with certified direct operation certification. Maintenance, seal, and resistance to shock increased and direct mechanism added. Three-conduit
More informationMiniature Pre-Leaded Vertical Enclosed Switches
Miniature Pre-Leaded Vertical Enclosed Switches 14CE Series Miniature enclosed switches with outstanding harsh environment resistance, ideal for compact machinery and equipment. Easy mounting by tightening
More informationAM1 (NZ BASIC) SWITCHES
HIGH CONTACT CAPACITY, PRECISE OPERATION AM1 (NZ BASIC) SWITCHES 24.1 FEATURES 15 A High current switching capacity and high precision Wide allowance of operating speed Versatile variety of actuators UL/CSA
More information(3) Terminals. 00: AC connector. Comparison of New and Old Molded Terminal Models. Model Location of lead outlet
Small Sealed Switch D4E-N CSM_D4E-_N_DS_E_4_ Slim and Compact Switch with Better Seal and Ensuring Longer Service Life than D4E Flat springs with an improved lever ratio of the built-in switch ensure smooth
More informationTURQUOISE SWITCHES V TYPE (ABV)
HIGH ENVIRONMENTAL RESISTANCE ABV1 TURQUOISE SWITCHES V TYPE (ABV) FEATURES Miniature size (33 15.9.3 mm) (99.626.406 inch) Sealed construction for use in adverse environment Sealed construction by epoxy
More informationTURQUOISE SWITCHES J TYPE (ABJ)
HIGH ENVIRONMENTAL RESISTANCE TURQUOISE SWITCHES J TYPE (ABJ) Dust protected type Immersion protected type (wire leads bottom type) (Mounting hole 2.3mm.091inch type) (Mounting hole 2.3mm.091inch type)
More informationTURQUOISE SWITCHES J TYPE (ABJ)
HIGH ENVIRONMENTAL RESISTANCE ABJ1,2,3,4,5 TURQUOISE SWITCHES J TYPE (ABJ) Dust protected type Immersion protected type (wire leads bottom type) (Mounting hole 2.3mm.091inch type) (Mounting hole 2.3mm.091inch
More informationOrdering Information. General-purpose Basic Switch X. Direct Current Switch with Built-in Magnetic Blowout. Model Number Legend
General-purpose Basic Switch X Direct Current Switch with Built-in Magnetic Blowout Incorporates a small permanent magnet in the contact mechanism to deflect the arc to effectively extinguish it. Ideal
More informationPERFORMANCE IP67 (IEC60529, JIS C 0920) Silver contact: Max.50 mω (6 to 8 Vdc, energizing current 1A, measured by voltage drop method) Gold alloy cros
Waterproof Vertical Type Limit Switches Model VCL-mm 2 sets of SPDT built-in switches enable use as a 2-point detection switch or multi-circuit control switch. On the 2-point detection (center-neutral)
More informationLimit Switches General Catalogue /2005
Limit Switches General Catalogue 2005 TABLE OF CONTENTS Page Limit Switches Selector Chart...4 Actuator selection...6 TECHNICAL INFORMATION...7 PROTECTIVE CONSTRUCTION...9 CAUTIONS FOR USE...10 IMPROVEMENT
More informationPre-wired Models D4C- (1) (2) (3) (4)
Authorised Distributors:- Intech Systems Chennai Pvt. Ltd, Chennai-600 03 Ph: +91 44 4353 Fax: 044 4353 E-mail: info@intechchennai.com Website: www.intechchennai.com Enclosed Switch D4C CSM_D4C_DS_E_10_1
More informationMiniature Enclosed Limit Switch D4MC. Ordering Information. Economical, General-Purpose, Enclosed Switch. H High precision and long life (10,000,000
R Miniature Enclosed Limit Switch Economical, General-Purpose, Enclosed Switch H High precision and long life (,000,000 mechanical operations) H Gasket diaphragm seal provides high environmental resistance
More informationCompact plastic limit switches with positive opening mechanism
Compact limit switches with positive opening mechanism LJK-N Series Positive opening mechanism Positive opening mechanism meets standards worldwide. A wide variety of actuators is available. The LJK-N
More informationSL1Series. Compact Horizontal Limit Switches
Compact Horizontal Limit Switches SL1Series Mechanical life of 0 million operations. Robust long-life and maintenance-free compact horizontal-type limit switches with IP67 seal. Mechanical life exceeds
More informationTURQUOISE SWITCHES ABJ TYPE
HIGH ENVIRONMENTAL RESISTANCE ABJ1,2,3,4,5 TURQUOISE SWITCHES ABJ TYPE.5 12.8 Dust protected type Iersion protected type (wire leads bottom type) (Mounting hole 2.3 type) (Mounting hole 2.3 type) FEATURES
More information1293 Limit Switches Selection Guide
1293 Limit Classification Subminiature size (Horizontal) size (Horizontal) Product name (AZ3) Micro Limit (AZH) Limit (Die cast case) (AZH) Limit (Die cast case) (AZH) Limit (Plastic case) Appearance USE
More informationOrdering Information. Snap Action Switch D2F. Subminiature Snap Action Switch D2F- Model Number Legend. Snap Action Switch D2F 31
Snap Action Switch Subminiature Snap Action Switch Switches 3 A loads (general-purpose), 1 A loads (low force general-purpose) and 0.1 A loads(microvoltage/ microcurrent) Long life span assured by high-precision
More informationCompact plastic limit switches with positive opening mechanism
Compact limit switches with positive opening mechanism LJK-NSeries Positive opening mechanism Positive opening mechanism meets standards worldwide. A wide variety of actuators is available. The LJK-N conforms
More informationRatings 1 A at 125 VAC 1 A at 30 VDC LED indicator Without indicator With indicator Without indicator With indicator Actuator
Miniature Limit Switch CSM DS_E_3_3 Many Models Including Roller Lever Switches are Only -mm Thick with Connector New center roller lever models that enable ganged mounting of up to 6 Switches. Cable connectors
More informationD2SW-P. Sealed Subminiature Basic Switch. Ordering Information D2SW-P
Sealed Subminiature Basic Switch Sealed Basic Switch with Simplified Construction, Mounting Compatible with SS and D2SW Series. Sealing by using rubber packing means the switch can be used in dust-proof
More informationMechanical Min. 20 million operations. Min. 2 million operations for the Model SL1-B. Min. 2 million operations for high oil. (All values assume overt
PHOTOELECTRIC & KEY COMPACT HORIZONTAL (RUGGED) Model SL1- C The C-spring material is a high-cobalt alloy, which enhances resistance to coolants. The shape of the diaphragm seal has been modified to prevent
More informationSafety Limit Switch
Safety Limit Switch D4B-@N CSM_D4B-_N_DS_E_4_1 Snap-action contact with certified direct operation certification. Maintenance, seal, and resistance to shock increased and direct mechanism added. Three-conduit
More informationPCB Relay. Contact form Terminal Single-side stable Single-winding latching
PCB Relay Subminiature, Sensitive SPDT Signal Switching Relay High sensitivity: 98 mw pickup coil power. Impulse withstand voltage meets FCC Part 68 requirements. Plastic-sealed construction. Unique moving
More information(3) Terminals. 00: AC connector. Comparison of New and Old Molded Terminal Models. Model Location of lead outlet
Small Sealed Switch D4E-N CSM_D4E-_N_DS_E_6_ Slim and Compact Switch with Better Seal and Ensuring Longer Service Life than D4E Flat springs with an improved lever ratio of the built-in switch ensure smooth
More informationD4B- N. Safety Interlock Switches. Safety Limit Switch. Specifications. Standards and EC Directives. Certified Standard Ratings D4BN
Safety Interlock Switches D4B- N D4BN Safety Limit Switch Snap-action contact with certified direct operation. mechanism (NC contacts only) added to enable contacts when faults occur, such as fused contacts.
More informationSafety Products. Safety Products. HS5E Series. HS5E Series Miniature Solenoid Locking Switch
HS5E Series HS5E Series Miniature Solenoid Locking Switch HS5E Key features include: World s smallest 4 contact solenoid interlock switch. (35 40 46 mm.) Four contacts. Gold-plated contacts. Spring lock
More informationFor full product information, visit Use the SpeedSpec Code or scan the QR Code for quick access to the specific web page.
Safety Interlock Switches D4S-N D4SN For full product information, visit www.sti.com. Use the SpeedSpec Code or scan the QR Code for quick access to the specific web page. Slim Safety Door Switches with
More informationLimit Switches with Positive Opening Mechanism
Limit Switches with Positive Opening Mechanism LJA Series Positive opening mechanism Snap action limit switches with positive opening mechanism enables general industrial machines to comply with EC directives
More informationSubminiature Basic Switch
Subminiature Basic Switch Subminiature Basic Switch Offers Long Life and High Reliability A design that combines simplicity and stability by the use of two split springs ensures a long durability of 30,000,000
More information1 Form A 5A small size power relay for interface
1 Form A 5A small size power relay for interface PQ RELAYS RoHS compliant Protective construction: Sealed type FEATURES 1. Compact and slim 20 mm (L) mm (W) 16 mm (H).787 inch (L).394 inch (W).630 inch
More informationLimit Switch D4D- N. Small, Economical Switch Featuring a Positive Opening Mechanism and Conforming to the CE Mark
Limit Switch Small, Economical Switch Featuring a Positive Opening Mechanism and Conforming to the CE Mark Features positive opening mechanism (NC contacts only) that opens contacts, thus preventing faulty
More informationD2SW-AQ. Sealed Subminiature Basic Switch Conforming to IP67 (Excluding the terminals on terminal models) Model Number Legend
Sealed Subminiature Basic Switch Conforming to IP67 (Excluding the terminals on terminal ) Use of epoxy resin assures stable sealing, making this switch ideal for places subject to water spray or excessive
More informationApplication Support. Product Information. Omron STI. Support Engineers are available at our USA headquarters from
Omron STI Application Support Thank you for your interest in Omron STI products. Please contact Omron STI with your application questions. Support Engineers are available at our USA headquarters from 4:00
More informationHS1C Interlock Switches with Solenoid
HSC es with The guard door remains locked until the machine stops completely. With the actuator mounted on the guard door and the interlock switch on the machine, the door is mechanically locked when closed.
More informationHS1B Series Full Size Interlock Switch. GS-ET-15 BG standard in Germany. Part Number Key
HSB Series Full Size Interlock Switch HSB features: Rugged aluminum die-cast housing Direct Opening Action: If the door is forced open, the contacts are disconnected even if they are welded or stuck Available
More information2NC (slow-action) Direct. Model. opening
Small Safety Limit Switch CSM DS_E_3_1 Smallest Class of Safety Limit Switches in the World Note: Contact your sales representative for details on models with safety standard certification. The world's
More informationD4B-N. uce. Safety Limit Switch. Positive Action Limit Switches with Direct Drive Contacts for Critical Switching Applications
Safety Limit Switch Positive Action Limit Switches with Direct Drive Contacts for Critical Switching Applications H Snap-action contact for accurate switching with safe operation via direct drive positive
More informationMiniature Limit Switches
(Horizontal) Plastic od 49.17.1* oller Lever 49.1.01.03 Miniature Limit witches 49 ealed oller Plunger 49 eries Miniature Limit witches Model election...1 Model Number tructure... Technical Data...3 pecification...4
More informationA22NK. Key-type Selector Switches
Key-type Selector Switches -mm dia. Key-type Selector Switches Control panel miniaturization through a more compact design and modified wiring direction. Addition of Push-In Plus terminal blocks for easy
More information1LS-J700 SERIES ULTRA LONG LIFE, GENERAL-PURPOSE COMPACT LIMIT SWITCHES
1LS-J700 SERIES ULTRA LONG LIFE, GENERAL-PURPOSE COMPACT LIMIT SWITCHES With on-site mechanical life 3 times that of conventional models, improved reliability drastically reduces minor line interruptions.
More informationAM5 (QV) SWITCHES AM5
MINIATURE SWITHES WITH HIGH PREISION (QV) SWITHES 5.9 FEATURES High precision as a result of designing ideal spring by using computer analysis O.P. 4.7±0.4mm Reliable design with shock resistance min.
More informationSG-B1 SERIES / SG-A1 SERIES
643 Door with Solenoid Interlock / Door Ultra-slim SG-B1 SERIES / SG-A1 SERIES Related Information General terms and conditions... F-7 General precautions... P.1501 PHOTO PHOTO Conforming to Machine &
More informationPCB Relay RC FCC. Ordering Information. Fully Sealed Relay with High Impulse Dielectric for Use in Telecommunications Equipment
PCB Relay Fully Sealed Relay with High Impulse Dielectric for Use in Telecommunications Equipment High sensitivity can be driven by digital circuits. Horizontal design allows use in /2-inch PCB racks.
More informationManual Reset Limit Switch
Manual Reset Limit Switch A Series of Pull-reset Models Available Ideal for elevators (EN81), escalators (EN115), and conveyors. Positive opening mechanism insulation approved by TÜV and BIA. and double
More informationHS1B R - R. Door Interlock Switches. HS1B Series. HS1B Series Full Size Interlock Switch. Part Number. HS1B features: Part Number Key.
HSB Series HSB Series Full Size Interlock Switch HSB features: Body Rugged aluminum die-cast housing Direct Opening Action: If the door is forced open, the contacts are disconnected even if they are welded
More informationPCB Relay. Ordering Information. Surface Mounting DPDT Relay G6S
PCB Relay Surface Mounting DPDT Relay Long terminals for ideal for soldering and mounting reliability. Space-saving inside-l terminal. High dielectric strength between coil and contacts (2,000 VAC), and
More informationSAFETY INTERLOCK SWITCH CONSTRUCTED WITH DUAL RESTORATION SPRINGS FEATURES
SAFETY INTERLOCK SWITCH CONSTRUCTED WITH DUAL RESTORATION SPRINGS FEATURES mm inch or more is assured as insulation distance between contacts (Snap-in mounting and 3 Form A type) Durability of 100,000
More informationD4BL. Protective Doors Are Locked Until Machines Completely Stop Operating. Guard Lock Safety-door Switch. Model Number Structure.
Guard Lock Safety-door Switch Protective Doors Are Locked Until Machines Completely Stop Operating A mechanical lock is applied automatically when the Operation Key is inserted. A high level of safety
More informationHS1C Series Full Size Interlock Switch with Locking Solenoid. GS-ET-15 BG standard in Germany. HS1C Series Functionality
Full Size Interlock Switch with Locking Solenoid HSC Key features include: Rugged Aluminum Die-cast Housing With the actuator mounted on a movable door, and the switch on a machine, the door can be mechanically
More informationBZSeries. Basic Switches
Basic Switches BZSeries These switches have been used extensively and have earned the high respect of our cusmers. Standard basic switches BZ Series are representative of Yamatake basic switches for their
More informationHS2B N B - R. Door Interlock Switches. HS2B Series. Full Size Interlock Switch. Part Number. HS2B features: Part Number Key.
HSB Series HSB Series Full Size Interlock Switch HSB features: Body Direct Opening Action: If the door is forced open, the contacts are disconnected even if they are welded or stuck Available with or without
More informationHS6B Series Sub-Miniature Interlock Switch. Direct Opening
HS6 Series HS6 Series Sub-Miniature Interlock Switch HS6 Key features include: Only 30mm x 15mm x 78mm Allows highest level of safety by having 3 contacts: dual load contacts + monitoring contact (ISO13849-1,
More informationD2VW. Sealed Miniature Basic Switch Conforms to IP67 (Excluding the terminals on terminal models) Model Number Legend. Sealed Miniature Basic Switch
Sealed Miniature Basic Switch Conforms to IP67 (Excluding the terminals on terminal models) Use of epoxy resin assures stable sealing, making this switch ideal for places subject to water spray or excessive
More informationHS6B Series Subminiature Interlock Switch
HS6B Series Subminiature Interlock Switch HS6B features: Only 78 x 30 x 15mm Allows highest level of safety by having 3 contacts: dual load contacts + monitoring contact (ISO13849-1, EN954-1) Two actuator
More informationPCB Relay. Single-side stable EN60950/EN41003 PCB terminal G6S-2 G6SU-2 G6SK-2 G6S-2-Y Surface mounting. stable
PCB Relay Surface Mounting DPDT Relay Long terminals for ideal for soldering and mounting reliability. Space-saving inside-l terminal. High dielectric strength between coil and contacts (2,000 VAC), and
More informationHS1E Series Full Size Interlock Switch with Locking Solenoid
HS1E Series HS1E Series Full Size Interlock Switch with Locking Solenoid HS1E Key features include: Basic unit and solenoid unit in one housing Plastic Housing: Light weight Ease of Wiring: All the terminal
More informationBZSeries. Basic Switches
Basic Switches BZSeries These switches have been used extensively and have earned the high respect of our cusmers. Standard basic switches BZ Series are representative of Yamatake basic switches for their
More informationHS1E Series Full Size Solenoid Locking Switches
HS1E Series Full Size Solenoid Locking Switches AS-Interface Safety at Work Barriers Enabling Switches Door Interlock Switches X Series E-Stops Overview HS1E features: Basic unit and solenoid unit in one
More informationStandard Interlock Safety Switches
Subminiature Only 78 x 30 x 1m Two actuator entrances provide flexibility for installation options Integrated molded cable reduces wiring time IP67 (IEC60529) Direct Opening Action Actuators comply with
More informationD4BS. Safety-door Switch. Model Number Structure. Switch D4BS - S Operation Key D4BS - K. Ordering Information
Safety-door Switch Safety-door Switch s Special Operation Key Directly Pulls Apart the Contacts from Each Other and Contributes to the Safety of the Production Site Conforms to EN (TÜV) standards corresponding
More informationOMRON Z LIMIT SWITCH
Issued April 00 DATA SHEET OMRON LIMIT SWITCH Based on OMRON Datasheet General-purpose Basic Switch CSM DS_E Best-selling Basic Switch Boasting High Precision and Wide Variety A large switching capacity
More informationD2HW. Sealed Ultra Subminiature Basic Switch. Ordering Information
Sealed Ultra Subminiature Basic Switch Smallest sealed snap-action switch in the industry with a very long stroke for reliable ON/OFF action. The case dimensions are 78% of conventional models, contributing
More informationHinged Safety Door Switch
Hinged Safety Door Switch Polymer housing, IP65, and slow-action contacts with positive opening. Two actuator types are available: Shaft Arm lever Arm lever type can be adjusted to allow a right (180 ),
More informationHigh-force: 230 g. Projected 7.3 mm General-purpose: 160 g. High-force: 230 g. Flat 4.3 mm General-purpose: 200 g.
Tactile Switch BW Tactile Switch with Sealed Construction for Automatic Soldering Sealed construction conforming to IP67 (IEC-6059) provides high reliability in locations exposed to dust or water. Available
More informationHS5E Miniature Interlock Switches with Solenoid
Small interlock switch with four poles and solenoid. Ideal for applications in small spaces. Compact body. 3 40 46 mm. Four-pole internal switches. Gold-plated contacts. Spring lock and solenoid lock types
More informationD4D-N. Safety Limit Switch. Small, Economical Switch Featuring a Positive Opening Mechanism and CE Marking. H Contacts opened by positive opening
Safety Limit Switch Small, Economical Switch Featuring a Positive Opening Mechanism and CE Marking H Contacts opened by positive opening mechanism (NC contacts only) H Double insulation makes ground terminal
More informationModel Number Structure
Long-life Two-circuit Limit Switch WLM@ New Long-life Limit Switches Added to the Wide Variety of WL Models Improved resistance to abrasion and smoother movement in the head section means that a mechanical
More informationSolenoid Locking Safety Switches
HSC HSC Full Size Solenoid Locking Switches Key features: Rugged aluminum die-cast housing 00N locking retention force Flexible Installation: The actuator can be accessed from two directions Select from
More informationHS1L Interlock Switches with Solenoid
HS1L Interlock Switches with Solenoid 3000N locking strength (largest in class)! * Suitable for large and heavy doors. Same actuator as HS1E (actuator retention force 3000N) Six contacts in a compact housing
More information2NC (slow-action) Direct. Model. opening
Small Safety Limit Switch D4F CSM_D4F_DS_E_5_2 Smallest Class of Safety Limit Switches in the World Note: Contact your sales representative for details on models with safety standard certification. The
More informationEnvironment-Sealed Basic Switches
HoneywellSensing and Control 1-800-537-6945 USA 1-815-235-6847International 1-416-293-8111Canada 13 Environment-Sealed Basic Switches GENERAL INFORMATION SE and XE switches are the smallest environment-sealed
More informationL1 = Solder terminal 2.8 x 0.5 mm Ø Behind panel
Raised design Emergency-stop switch, foolproof EN IEC 60947-5-5, IP 65 Equipment consisting of (schematic overview) L1 35.6 6 max. 59.5 41 18x24 Actuator Product can differ from the current configuration.
More informationPCB Relay. Ordering Information. SPST-NO Type Breaks 10-A Loads; SPST-NO + SPST-NC Type Breaks 8-A Load G6C - - VDC
PCB Relay SPST-NO Type Breaks 10-A Loads; SPST-NO + SPST-NC Type Breaks 8-A Load Compact: 20 15 10 mm (L W H). Low power consumption: 200 mw. Flux protection or fully sealed construction available. Unique
More information10 AMP POWER RELAY. Breakdown voltage* 2. Operate time* 3 (at nominal voltage) Shock resistance. Vibration resistance. Unit weight
VDE 2c, 3c AMP POWER RELAY RELAYS 2. 1.72 FEATURES Interchangeable with existing models Long life and high reliability High contact capacity up to A 20 Available with plug-in/solder and quick-connect terminals
More informationTURQUOISE STROKE SWITCHES
ULTRA-LONG STROKE, HIGH CONTACT RELIABILITY SEALED SWITCHES (SAME SIZE AS J TYPE) ASQ1 TURQUOISE STROKE SWITCHES 9.6 13.3 FEATURES (mm) http://panasonic-denko.co.jp/ ac/e/service/environment 1. Same size
More informationDoor Interlock Switches
HSE Series HSE Series Full Size Locking Switches Overview X Series E-Stops HSE features: Basic unit and solenoid unit in one housing Plastic Housing: Light weight Ease of Wiring: All the terminal screws
More informationTURQUOISE STROKE SWITCHES
Long Stroke and Sliding Contact Construction Sealed Switches TURQUOISE STROKE SWITCHES 13.3 10.1 (Unit: ) RoHS compliant FEATURES For pin plunger type, it maintains a long stroke OT (Over Travel) with
More informationNon-illuminated Push Buttons
Non-illuminated Push Buttons 3 Accessories for push buttons Lockout attachment Contact block kits Lens kits Wobblestick kit Push Button Cap Interchangeable, snap-in design Protective caps 9 colors: red,
More informationFor full product information, visit Use the SpeedSpec Code or scan the QR Code for quick access to the specific web page.
Courtesy of CMA/Flodyne/Hydradyne Motion Control Hydraulic Pneumatic Electrical Mechanical (00) 6-0 www.cmafh.com Safety Interlock Switches DSL-N Super Small Class 6-Contact uard Lock Safety-Door Switch
More informationLoad Resistive load (p.f. = 1) Inductive load (p.f. = 0.40, L/R = 7 ms) Rated load 5 A at 250 VAC, 30 VDC 2 A at 250 VAC, 30 VDC
Power PCB Relay G6D-ASI Reduced board space ideal for high-density mounting (45% smaller than the surface area of G6B). Slim package: measures 6.5 W x 17.5 L x 12.5 H mm Switches loads up to 5 A, 250 VAC/30
More informationD4DS. Compact Interlock Safety Door Switch. Compact Safety Switch Saves Space and is Ideal for a Variety of Doors. Refer to Precautions on page 9.
Compact Interlock Safety Door Switch Compact Safety Switch Saves Space and is Ideal for a Variety of Doors Positive opening mechanism and double insulation approved by TÜV and BIA. Five-direction Operation
More informationLow Signal Relay. To Order: Select the part number and add the desired coil voltage rating, (e.g., G6A-274P-ST-US-DC12).
Low Signal Relay High sensitivity can be driven by digital circuits Low-profile design allows use in 12.70 mm (0.50 in) PC board rack Surge withstand voltage meets FCC Part 68 regulation Units can be mounted
More informationMultiple Plunger Limit Switch
Multiple Plunger Limit Switch Series Offers igh Sealability and Long Life with Aluminum Die-cast Enclosure Ideal for machine tools and sequential control Switch box has an oil drain Sturdy construction
More informationCable length. 3: 3 m. 4: Adjustable mounting (vertical) 4: 3NC (slow action) 5: 5 m. (Slow-action) Horizontal 1 m D4GS-N1R D4GS-N2R D4GS-N3R D4GS-N4R
Slim Safety-Door Switch Industry s Smallest Safety-Door Switch (with 3 Contacts) for Use in Space-Confined Areas Slim body design (85 x 30 x 17 mm) suitable for small door applications 2-contact and 3-contact
More informationD2VW. Sealed Miniature Basic Switch. Ordering Information Model Number Legend D2VW- -
Sealed Miniature Basic Switch D2VW Sealed Miniature Basic Switch Conforms to IP67 (Molded Lead Wire Type Only) Use of epoxy resin assures stable sealing, making this switch ideal for places subject to
More information