Product sheet. Mechlift Pro E

Transcription

1 Product sheet Mechlift Pro E

2 Versatile momentabsorbing lifter Flexible lifting unit Electric Mechlift Pro is an ergonomically designed moment-absorbing lifter which can be used for many lifting solutions. It can be fitted with standardised or customized grippers, and with accessories such as rotation units, brake unites, programmable stop positions, and more. Several configurations Electric Mechlift Pro is modular and can be supplied in many different configurations. It can also be integrated with Powerdrive drive units for driven sideway motions, or with Mechbelt linear unit for an automated pick and place type of handling. Moment-absorbing Electric Mechlift Pro consists of telescoping aluminium profiles that are anodized and thereby completely maintenance free. In the pillar unit there are torque-absorbing sliding blocks, (in 00/0 torque-absorbing wheels), which enable load outside the lifter s vertical lift shaft. Encoder Electric Mechlift Pro may optionally be equipped with an encoder that reads the axle in the spindle limit switch. This makes it possible to set a lower stop position, as well as a further two stop/start positions along the stroke. The positions are stored in a built in memory in the frequency converter and are not erased in case of power cuts. Many application areas Typical application areas for electric Mechlift Pro are handling of cable rolls, mat rolls, tanks, doors, windows, and various types of automotive parts such as vehicle doors, sunroofs, seats, windshields, hoods, etc. Electric Mechlift Pro is an ergonomically designed momentabsorbing lifter which can be used for many lifting solutions.

3

4 Technical specification electric Mechlift Pro Technical data Mechlift Pro E Technical data Mechlift Pro E Max load Max torque Stroke SL Noise level Suspension height /0/0/00/0 00/00/00 Nm mm <0 d () 0-90 mm Motor output 0,/0,/, kw Voltage x0v, N, PE, (±) 0/0 Hz Fuse T 0 Enclosure class IP Work temperature -0 C (indoor use) Depends on pillar unit Depends on engine unit 0 / 0 0- / 0-00 / 0

5 H 0 SL (x) Mx, Mx, (x) Mx, (x) 9 90 L Overview. Media connection. Suspension. Engine unit - C Rotation brake (option ) C L m -0. Cross unit elmechlift-monterad broms Spindle limit switch (upper / lower limit switch) Encoder (option ) Posit rt.nr rake caliper-sub assembly MCS Mx Hex socket head cap screw Push-in L-fitting QSML-M- MCS Mx0 Hex socket head cap screw Push-in T-fitting QSMT-M- Schims- brake unit M Hexagon nut with torque part enämning romsok, rake caliper, del-smst sub-assy Skruv MCS Screw MCS Mx Vinkelkoppling, instick M- Mx Push-in H L-fitting M- Skruv MCS Screw MCS Mx0 Mx0 T-koppling, Push-in T instick M- fitting M- Shimsbricka Shim washer Låsmutter M Locking nut M enämningdo enämningdo Étrier de frein, remssattel, R sous-ensembl Unterbaugrupp e e Vis MCS Schraube Mx MCS Mx Raccord L-Steckverschr coudé M- aubung M- Vis MCS Schraube Mx0 MCS Mx0 Raccord T-Steckverschr enfichable en aubung M- T M- Rondelle cale Passscheibe Écrou de Sicherungsmut blocage M ter M enämningdok enämningdo R/S ntal L - Top limit switch (only 00 / 0 ) elmechlift-encoder Lifting chain (00 / 0 : pcs). Control cable PL. Control unit Control unit bracket (option C) SL Mounting clamp, control unit C Mounting clamp, control unit Mounting clamp, control unit L t -. Pillar unit 0 racket MP0 complete -. Tool bracket 9 Mountin - Cover chain Simplex /" L=SL+000 Roller L = PL + L m + 9 Rotation unit MP0 Mlift0-monterad Pillar unit 0/0- Stroke mm 0-9 Rotation unit MP0 with brake + + () H + (//C) : Mechlift Pro E specification Posit rt.nr 9 Shaft be Mounting bracket MP0, round, complete 9 rake u Shaft bearing assembly 9 Shaft L= 90 Rotation Cover xd=, part Cover part 00 MCS M Shaft L= 9 MCS M Rotation limiter ( parts) 0 9 Rubber Stud DIN MCS Mx0 Hex socket head cap screw 0 M Hex MCS Mx Hex socket head cap screw Posit rt.nr Protection cap D= Rubber damper 0/- Shore L= Stud DIN Mx M Hexagon nut with torque part enämning Cover p

6 -0-0 () 0/0 00 Nm 0, kw 0- m/min mm SL+ mm 9- (Min ) Max load Profile MP Max moment Motor output Lifting speed Stroke SL Pillar length PL Tare weight. Suspensions Height (mm) Quantity Suspension 0 0 0, - Suspension 90-0* , Suspension x 0-0* < Suspension x 0-0* < Suspension x 0-90* < Suspension x 0-90* < Ø (mm) Fits trolley, LH, H./ 0, H * Cut to selected suspension height, see also Suspensions page. -0 / 0 / 0 00 / 0. Cross units. Cross units Profile cross unit 00 Profile cross unit Steel cross unit, up 00 Steel cross unit, up * 0 Cross unit steel 00 MP0 up 0-0* Cross unit steel 00 MP0 down Cross unit profile 00 MP0 el Steel cross unit, down 00 Steel cross unit, down * 0-0* 00 0 * 0-0, depends on media connection. -. Option C Rotation brake 0, 0 C. Media connections L m To overcome the frictional force of the sliding blocks Total length: L = PL + L m + Depends on configuration Possible build height H, see page. 0-0 (standard) 09 rake caliper-sub assembly 0 0 MCS Mx Hex socket head cap screw Push-in L-fitting QSML-M- 0 free rotation, pol + pol 0 MCS Mx0 Hex socket head cap screw Push-in T-fitting QSMT-M- 0 free rotation, pol elmechlift-monterad broms 9 Schims- brake unit 0 M Hexagon nut with torque part Posit rt.nr enämning romsok, del-smst Skruv MCS, Push-in,, rake caliper, sub-assy Screw MCS Étrier de frein, remssattel, sous-ensembl e e Vis MCS Unterbaugrupp Schraube Mx Mx Mx MCS Mx Vinkelkoppling, L-Steckverschr instick M- L-fitting M- Skruv MCS Screw MCS Raccord coudé M- aubung M- Vis MCS Schraube Mx0 Mx0 Mx0 MCS Mx0 T-koppling, Push-in T T-Steckverschr instick M- fitting M- Raccord enfichable en aubung M- T M- Shimsbricka Shim washer Rondelle cale Passscheibe Låsmutter M Locking nut Écrou de Sicherungsmut M blocage M ter M enämningdo enämningdo enämningdok enämningdo R R/S ntal

7 Mx, (x) 0 Ø90 0 Ø00 0 Mx, (x) Ø90 0 Ø Pillar units PL. Engine units Pillar unit SL= Engine unit 0 Pillar unit SL=0 0 Pillar unit SL=000 Pillar unit SL= Option Pillar unit SL=00 Pillar unit SL=00-00 SL+ < Encoder The encoder simplifies positioning in the Z direction. Mounted in the rotary limit switch. Teach-in function. Is connected directly to Mechlift Pro (no external PLC) Shaft bearing Cover xd=, Cover part MCS Mx H. Tool adapters. Tool adapters Rubber dampe Rotation limite MCS Mx0 9 Protection cap 9 MS Mx Tool adapter MP0, 00 Rotation unit MP0, Rotation unit MP0 9 0 Rotation unit MP0 with brake 0 Stud DIN M Hexagon n Rotation unit MP0 brake Posit rt.nr. Control cables* Control cable L=0, m 09 Control cable L=,0 m Control cable L=,0 m Control cable L=,0 m 9 Control cable L=, m 0 * Length L from inner profile to control unit. 0, m. Control units With emergency stop 9 With emergency stop + protection 9 With separate em. stop 0 With separate em. stop + protection C. Option Unit Mounting clamp pc Wall bracket set djustable wall bracket set Mounting clamp, control unit Mounting clamp, clamp, control control unit un Mounting clamp, control unit

8 () 0/0 0/0 00 Nm 0, kw 0-0 m/min mm SL+0 mm - (Min ) Max load Profile MP Max moment Motor output Lifting speed Stroke SL Pillar length PL Tare weight. Suspensions Height (mm) Quantity Suspension 0 0 0, - Suspension 90-0* , Suspension x 0-0* < Suspension x 0-0* < Suspension x 0-90* < Suspension x 0-90* < Ø (mm) Fits trolley, H./ 0, H * Cut to selected suspension height, see also Suspensions page. / 0 / 0 0 / 0. Cross units. Cross units Profile cross unit 00 Profile cross unit Steel cross unit, up 00 Steel cross unit, up * 0 Cross unit steel 00 MP0 up 0-0* Cross unit steel 00 MP0 down Cross unit profile 00 MP0 el Steel cross unit, down * 0 Steel cross unit, down * 0 * 0-0, depends on media connection.. Option Rotation brake 0, 0. Media connections L m To overcome the frictional force of the sliding blocks Total length: L = PL + L m + Depends on configuration 0-0 (standard) 0 free rotation, pol + pol 0,, Possible build height H, see page. 0 free rotation, pol,

9 (x) 0 00 Mx, Pillar units PL. Engine units Pillar unit SL= Engine unit 0 Pillar unit SL=0 Engine unit 0 Pillar unit SL=000 0 Pillar unit SL= Pillar unit SL= Option Pillar unit SL=00-00 SL+0 < Encoder The encoder simplifies positioning in the Z direction. Mounted in the rotary limit switch. Teach-in function. Is connected directly to Mechlift Pro (no external PLC).. Tool adapters. Tool adapters Tool adapter MP0,0 0 Rotation unit MP racket MP0 complete Rotation unit MP0 brake Control cables* Control cable L=0, m 09 Control cable L=,0 m Control cable L=,0 m Control cable L=,0 m 9 Control cable L=, m 0 * Length L from inner profile to control unit. 0, m. Control units With emergency stop 9 With emergency stop + protection 9 With separate em. stop 0 With separate em. stop + protection C. Option Unit Mounting clamp pc Wall bracket set djustable wall bracket set Mounting clamp, control unit 9 Mounting clamp, clamp, control control unit un

10 () 0-/0-0/0/0 00 Nm 0, kw 0-0 m/min mm SL/+0 mm -0 (Min ) Max load Profile MP Max moment Motor output Lifting speed Stroke SL Pillar length PL Tare weight. Suspensions Height (mm) Quantity Suspension 0 0 0, - Suspension 90-0* , Suspension x 0-0* < Suspension x 0-0* < Suspension x 0-90* < Suspension x 0-90* < Ø (mm) Fits trolley, H./ 0, H * Cut to selected suspension height, see also Suspensions page. / 0 / 0 0 / 0. Cross units. Cross units Profile cross unit 00 Profile cross unit Steel cross unit, up 00 Steel cross unit, up * 0 Cross unit steel 00 MP0 up 0-0* Cross unit steel 00 MP0 down Cross unit profile 00 MP0 el Steel cross unit, down * 0 Steel cross unit, down * 0 * 0-0, depends on media connection.. Option Rotation brake 0, 0. Media connections L m To overcome the frictional force of the sliding blocks Total length: L = PL + L m + Depends on configuration 0-0 (standard) 0 free rotation, pol + pol 0,, Possible build height H, see page. 0 free rotation, pol, 0

11 9 (x) 0 0 Mx, 0 0 Mx, (x) 0 Ø90 0 Ø00 0 Mx, (x) Ø90 0 Ø Pillar units PL. Engine units Pillar unit SL=00 00 Engine unit 0 Pillar unit SL=0 Engine unit 0 Pillar unit SL=000 0 Pillar unit SL=0 0 Pillar unit SL= Option Pillar unit SL= SL/+0 < Encoder The encoder simplifies positioning in the Z direction. Mounted in the rotary limit switch. Teach-in function. - Is connected directly to Mechlift Pro (no external PLC) Shaft bearing Cover xd=, Cover part MCS Mx H. Tool adapters. Tool adapters Rubber dampe Rotation limite MCS Mx0 9 Protection cap 9 MS Mx Tool adapter MP0, 00 Rotation unit MP0, Rotation unit MP0 9 0 Rotation unit MP0 with brake 0 Stud DIN M Hexagon n Rotation unit MP0 brake Posit rt.nr 00 racket MP0 complete. Control cables* Control cable L=0, m 09 Control cable L=,0 m Control cable L=,0 m Control cable L=,0 m 9 Control cable L=, m 0 * Length L from inner profile to control unit. 0, m. Control units With emergency stop 9 With emergency stop + protection 9 With separate em. stop 0 With separate em. stop + protection C. Option Unit Mounting clamp pc Wall bracket set djustable wall bracket set Mounting clamp, control unit Mounting clamp, clamp, control control unit un

12 /0 0/0 00 Nm, kw 0-0 m/min mm SL+000 mm - Max load Profile MP Max moment Motor output Lifting speed Stroke SL Pillar length PL Tare weight. Suspensions Height (mm) Quantity Suspension 0 0 0, - Suspension 90-0* , Suspension x 0-0* < Suspension x 0-0* < Suspension x 0-90* < Suspension x 0-90* < Ø (mm) Fits trolley, H./ 0, H * Cut to selected suspension height, see also Suspensions page. 0 / 0 0 / 0. Cross units Steel cross unit, up 00 Steel cross unit, up 000 Steel cross unit, down 00 Steel cross unit, down * 0 Cross unit steel 00 MP0 up 0-0* 0-0* 0-0* Cross unit steel 00 MP0 down * 0-0, depends on media connection.. Option Rotation brake 0, 0. Media connections L m Total length: L = PL + L m + Depends on configuration. 0-0 (standard) 0 free rotation, pol + pol 0,, Possible build height H, see page. 0 free rotation, pol,

13 . Pillar units PL. Engine units Pillar unit SL=00 00 Engine unit 00 Pillar unit SL=0 0 9 Engine unit 0 Pillar unit SL= Pillar unit SL=0 0 Pillar unit SL= Option Pillar unit SL=00-00 SL+000 <9 Encoder The encoder simplifies positioning in the Z direction. Mounted in the rotary limit switch. Teach-in function. Is connected directly to Mechlift Pro (no external PLC).. Tool adapters Tool adapter MP0,0 0. Control cables* Control cable L=0, m 09 Control cable L=,0 m Control cable L=,0 m Control cable L=,0 m 9 Control cable L=, m 0 * Length L from inner profile to control unit. 0, m. Control units With emergency stop 9 With emergency stop + protection 9 With separate em. stop 0 With separate em. stop + protection C. Option Unit Mounting clamp pc Wall bracket set djustable wall bracket set Mounting clamp, control unit Mounting clamp, clamp, control control unit un

14 Suspensions - 0 c /c SL L H c /c Ø L L, 0 0, 0 0-L L 0 )x(, 0 0 //,=D muludnep gninmäne tisop 90 rn.tr 090- / 0 tisop 0 Mlift0-monterad / 0-0 L

15 uild height H Note that the build height H is indicated from the upper profile end to the top edge of the cross unit, regardless of version. uild height H SL Profile unit Steel unit, up Steel unit, down mm 0-0 (*) 0-00 (0*) 0-0 (90*) 0-00 (00*) 0-0 (*) mm 0-90 (9*) 0-0 (90*) 0-0 (0*) 0-0 (0*) 0-90 (9*) mm 0 - (*) 0-9 (9*) 0 - (*) 0 - (9*) 0 - (0*) 0/0 uild height H SL Profile unit Steel unit, up Steel unit, down mm 0-90 (9*) 0-0 (0*) 0-0 (9*) 0-0 (00*) 0-90 (9*) mm 0-0 (*) 0-9 (90*) 0 - (0*) 0-9 (0*) 0-0 (*) mm 00-0 (0*) (*) 00-0 (0*) 00-0 (9*) 00-0 (0*) 0-/0- uild height H SL Profile unit Steel unit, up Steel unit, down mm 0-90 (*) 0 - (*) 0-0 (0*) 0-9 (0*) (*) 0-0 (900*) mm 0-0 (0*) 0 - (0*) 0-90 (9*) 0-0 (*) 0-0 (90*) 0-0 (0*) mm 00* 00 - (0*) (*) 00 - (*) (00*) (*) 00/0 uild height H SL Profile unit Steel unit, up Steel unit, down mm 0-0 (0*) 0-0 (*) 0-00 (0*) 0-0 (9*) 0-0 (00*) mm 0-0 (0*) 0 - (00*) (*) 0-0 (*) 0-0 (90*) mm 00-0 (0*) 00-0 (0*) (*) 00-0 (*) 00-0 (00*) * Default value

16 Mechlift Pro E For more information, contact your sales representative. MOVOMECH Kabelvägen 9 S-9 09 Kristianstad, Sweden Telephone: + (0) Fax: + (0) info@movomech.se Web: Copyright 0 Movomech 0-0-0