High Voltage Engineering
|
|
- Noel Gaines
- 5 years ago
- Views:
Transcription
1 High Voltage Engineering Course Code: EE 2316 Prof. Dr. Magdi M. El-Saadawi saadawi1@gmail.com 1
2 Contents Chapter 1 Introduction to High Voltage Technology Chapter 2 Generation of High Voltages and Currents Chapter 3 Measurement of High Voltages and Currents Chapter 4 Breakdown Mechanism of Gases, Liquid and Solid Materials 2
3 Chapter 3 Measurement of High Voltages and Currents 3.1. Introduction 3.2. Measurement of High Direct Current Voltages High Ohmic Series Resistance with Microammeter Resistance Potential Dividers for d.c. Voltages Generating Voltmeters 3.3. Measurement of High A.C. and Impulse Voltages Series Impedance Voltmeters Capacitance Potential Dividers and Capacitance Voltage Transformers Electrostatic Voltmeters Peak Reading a.c. Voltmeters Spark Gaps Potential Dividers for Impulse Voltage Measurements 3.4. Measurement of High A.C. and Impulse Currents Measurement of High Direct Currents Measurement of High Frequency and Impulse Currents Cathode Ray Oscillographs for Impulse Measurements 3.5. Solved Examples 3
4 Table 3.1 High voltage Measurement Techniques 4
5 Table 3.2 High Current Measurement Techniques 5
6 3.3.3 Electrostatic Voltmeters The first version of electrostatic voltammeter 6
7 3.3.3 Electrostatic Voltmeters Principle of Operation When one of the electrodes is free to move, the force on the plate can be measured by controlling it by a spring or balancing it with a counterweight. For high voltage measurements, a small displacement of one of the electrodes by a fraction of a millimeter to a few millimeters is usually sufficient for voltage measurements. As the force is proportional to the square of the applied voltage, the measurement can be made for a.c. or d.c. voltage. 7
8 3.3.3 Electrostatic Voltmeters 8
9 9
10 Construction of Electrostatic Voltmeters Electrostatic voltmeter is made with parallel discs M &F configuration using guard rings G to avoid corona and field fringing at the edges The space between the two electrodes must be large enough to avoid breaking the air between them (about 100 cms for a voltage of about 300 kv). As the spacing between the two electrodes is large, the uniformity of the electric field is maintained by the guard rings H which surround the space between the discs M &F The guard rings H are maintained at a constant potential in space by a capacitance divider C ensuring a uniform special potential distribution. 11/12/
11 Construction of Electrostatic Voltmeters The limitation on the gap distance is the safe working stress (V/s) allowed in air is normally 5 kv/cm or less. The cap D encloses a sensitive balance B, one arm of which carries the suspension ايقاف of the moving disc. The movement of the disc is thereby magnified using a mirror which reflects a beam of light. Some instruments are constructed in an enclosed structure containing compressed air, carbon dioxide, SF6 gas or vacuum as medium between the two discs, in this case the meter is compact and much smaller in size. Using SF6 gas the voltmeter can measure voltages up-to 1000 kv and accuracy is of the order of 0.1% 11
12 Construction of Electrostatic Voltmeters The arrangement of this instrument may cause resonance. An upper frequency limit of about one MHz is achieved in careful designs. The accuracy for a.c. voltage measurements is better than ±0.25%, and for d.c. voltage measurements it may be ±0.1% or less. 12
13 3.3.4 Peak Reading a.c. Voltmeters In some occasions, the peak value of an a.c. waveform is more important to obtain the maximum dielectric strength of insulating solids, etc. When the waveform is not sinusoidal, rms value of the voltage multiplied by 2 is not correct. Hence a separate peak value instrument is desirable in high voltage applications 13
14 Series Capacitor Peak Voltmeter 14
15 Series Capacitor Peak Voltmeter Fig /12/2017 Prof. Dr. Magdi El-Saadawi 15
16 Digital peak reading meter Instead of directly measuring the rectified charging current, a proportional analog voltage signal is derived which is then converted into a proportional medium frequency f m 16
17 Digital peak reading meter 17
18 Peak Voltmeters with Potential Dividers 18
19 3.3.6 Potential Dividers for Impulse Voltage Measurements Potential or voltage dividers for high voltage impulse measurements, high frequency a.c. measurements, or for fast rising transient voltage measurements are usually either resistive or capacitive or mixed كما سبق فى الجهد العالى المتردد type. element The low voltage arm of the divider is usually connected to a fast recording oscillograph or a peak reading instrument through a delay cable. A schematic diagram of a potential divider with its terminating equipment is given in Fig
20 3.3.6 Potential Dividers for Impulse Voltage Measurements 20
21 3.3.6 Potential Dividers for Impulse Voltage Measurements The mainly errors in the measurement: Residual inductance in the elements; Stray capacitance occurring between the elements, from sections and terminals of the elements to ground, and from the high voltage lead to the elements or sections; The impedance errors due to connecting leads between the divider and the test objects, and ground return leads and extraneous current in ground leads; Parasitic oscillations التذبذبات الطفيلية due to lead and cable inductances and capacitance of high voltage 11/12/ terminal to ground.
22 Solved Examples pp
23 Solved Examples pp
2. Analog measurement of Electrical Quantities
2.1. Classification of Analog Instruments Definition and concept of Measurement The analog instruments can be classified on the basis of various parameters. Analog Instruments On the basis of measuring
More informationHIGH VOLTAGE MODULE TEST SYSTEM
HIGH VOLTAGE MODULE TEST SYSTEM 4.0/4 Module Test Systems n AC, DC, and impulse testing n Factory testing n R&D n Education / training MODULES FOR VOLTAGE GENERATION Test transformers for 100 and 200 kv
More informationMAHALAKSHMI ENGINEERING COLLEGE TIRUCHIRAPALLI
MAHALAKSHMI ENGINEERING COLLEGE TIRUCHIRAPALLI 621213 QUESTION BANK --------------------------------------------------------------------------------------------------------------- Sub. Code : EE2402 Semester
More informationEE 842: ELECTRIC POWER SYSTEM IV (3-1-0) Full marks: Theory 100 Sessional=75
EE 842: ELECTRIC POWER SYSTEM IV (3-1-0) Full marks: Theory 100 Sessional=75 1. Thermal Power Plant: Thermal power plant economical, and ecological. Line diagram of thermal power plant- Boiler: classifications
More informationرب اشرح لى صدرى ويسر لى أمر واحلل عقدة من لسانى يفقهوا قولى
بسم هللا الرحمن الرحيم رب اشرح لى صدرى ويسر لى أمر واحلل عقدة من لسانى يفقهوا قولى صدق هللا العظيم Chapter 11 Overhead Line Insulators pp. 370-389 The insulators for overhead lines provide insulation to
More informationCurrent accuracy class. Sensor principles
Indoor Combi Sensor 12, 17.5 and 25 kv 1250 A and 3200 A KEVCD Highest voltage for equipment kv 12.24 Rated continuous primary current A 1250.3200 Rated transformation ratio for current measurement, K
More informationIgnition Coil Current Waveforms 2007 Honda Accord SE 4CYL
P a g e 1 Ignition Coil Current Waveforms 2007 Honda Accord SE 4CYL With a current clamp and a cheap scope, it is easy to monitor the ignition coil currents and quickly diagnose a bad ignition coil. The
More information1 Low-voltage Power-factor Correction capacitors KNK APPLICATION DESIGN
APPLICATION The KNK capacitors are used for power - factor correction of inductive consumers (transformers, electric motors, rectifiers) in industrial networks for voltages of up to 660 V. DESIGN Cylindrical
More informationUNIT-5 MEASUREMENT OF SPEDD, ACCLERATION AND VIBRATION
UNIT-5 MEASUREMENT OF SPEDD, ACCLERATION AND VIBRATION Introduction: Speed is a rate variable defined as the time-rate of motion. Common forms and units of speed measurement include: linear speed expressed
More informationThis chapter gives details of the design, development, and characterization of the
CHAPTER 5 Electromagnet and its Power Supply This chapter gives details of the design, development, and characterization of the electromagnets used to produce desired magnetic field to confine the plasma,
More informationDEPARTMENT OF ELECTRICAL ENGINEERING DIT UNIVERSITY HIGH VOLTAGE ENGINEERING
1 DEPARTMENT OF ELECTRICAL ENGINEERING Introduction to High Voltage Testing It is essential to ensure that the electrical equipment is capable of withstanding the overvoltages that are met within the service.
More informationHigh-Voltage Terminal Test of Test Stand. for 1-MV Electrostatic Accelerator
High-Voltage Terminal Test of Test Stand for 1-MV Electrostatic Accelerator Sae-Hoon Park 1,2, Yu-Seok Kim 2 1 KOMAC, Korea Multipurpose Accelerator Complex, Gyenogju 780-904 2 Department of Energy & Environment
More informationS93419E Power Tetrode
S93419E Power Tetrode VHF Linear Beam Power Tetrode Full Input to 300 MHz Liquid Cooled Anode 125 kw CW Power Output 16dB Gain 75% Efficiency The BURLE S93419E is designed specifically for use in high-gain,
More informationHIGH VOLTAGE, HIGH CURRENT, HIGH DI/DT SOLID STATE SWITCH
HIGH VOLTAGE, HIGH CURRENT, HIGH DI/DT SOLID STATE SWITCH Steven C. Glidden Applied Pulsed Power, Inc. Box 1020, 207 Langmuir Lab, 95 Brown Road, Ithaca, New York, 14850-1257 tel: 607.257.1971, fax: 607.257.5304,
More informationNEC MODEL TPS-5.5 TERMINAL POTENTIAL STABILIZER
NATIONAL ELECTROSTATICS CORP 7540 Graber Road, PO Box 620310 Middleton, WI 53562-0310 USA Telephone: (608) 831-7600 E-Mail: nec@pelletron.com FAX: (608) 831-9591 NEC MODEL TPS-5.5 TERMINAL POTENTIAL STABILIZER
More informationLCL FILTERS INSTRUCTIONS MANUAL (M A) (c) CIRCUTOR S.A.
LCL FILTERS INSTRUCTIONS MANUAL (M98121701-03-09A) (c) CIRCUTOR S.A. ------ LCL filters: Instructions Manual ----- Page 2 TABLE OF CONTENTS TABLE OF CONTENTS 2 1 CHECKS ON RECEIPT OF THE EQUIPMENT. 3 2
More informationChapter 4 Ignition & Electrical Systems
Chapter 4 Ignition & Electrical Systems Chapter 4 Section A Study Aid Questions Fill in the Blanks 1. Ignition systems can be divided into two classifications: systems or systems for reciprocating engines.
More informationBHARAT ALUMINIUM COMPANY LTD. SPECIFICATIONS FOR SYNCHRONOUS GENERATOR GENERAL Make : Jinan Power Equipment Factory Type : WX2
BHARAT ALUMINIUM COMPANY LTD. SPECIFICATIONS FOR SYNCHRONOUS GENERATOR 1.00.00 GENERAL 1.01.00 Make : Jinan Power Equipment Factory 1.02.00 Type : WX21Z-073LLT 1.03.00 Reference Standard : GB/T7064-2002
More informationImpulse Voltage Test System, Q Structure, kV
TCDYQ Series Impulse Voltage Test System, Q Structure, 200-3600kV Applications: Shunt reactors Power transformers Distribution transformer Instrument transformers Cables (type tests) Bushings Arresters
More informationLoad Cell for Manually Operated Presses Model 8451
w Technical Product Information Load Cell for Manually Operated Presses 1. Introduction... 2 2. Preparing for use... 2 2.1 Unpacking... 2 2.2 Using the instrument for the first time... 2 2.3 Grounding
More information1ZSC AAA en, Rev. 6. Resin impregnated paper bushing, oil to SF 6., type GSBK Technical guide
1ZSC563-AAA en, Rev. 6 Resin impregnated paper bushing, oil to SF 6, type GSBK Technical guide Original instruction The information provided in this document is intended to be general and does not cover
More informationShaft Grounding Rings. Protecting VFD Driven Motors from Bearing Currents
Shaft Grounding Rings Protecting VFD Driven Motors from Bearing Currents Variable Frequency Drives and Electric Induction Motors When pulse width modulation (PWM) Variable Frequency Drives (VFDs) were
More informationAPS 420 ELECTRO-SEIS Long Stroke Shaker with Linear Ball Bearings Page 1 of 5
Long Stroke Shaker with Linear Ball Bearings Page 1 of 5 The APS 420 ELECTRO-SEIS shaker is a long stroke, electrodynamic force generator specifically designed to be used alone or in arrays for studying
More informationTo study the constructional features of ammeter, voltmeter, wattmeter and energymeter.
Experiment o. 1 AME OF THE EXPERIMET To study the constructional features of ammeter, voltmeter, wattmeter and energymeter. OBJECTIVE 1. To be conversant with the constructional detail and working of common
More informationIndependent Testing Laboratory for High Voltage Equipment
T E S T I N G L A B O R A T O R Y Independent Testing Laboratory for High Voltage Equipment 1 CHALLENGING ENVIRONMENT The primary concern for utilities is to ensure grid reliability, efficiency, and security.
More informationInstrumental technique presentation
Instrumental technique presentation ammeter Manju 28.10.2017 An ammeter is a measuring instrument used to measure the electric current in a circuit. History I A The relation between electric current, magnetic
More informationCommon to almost all eco-friendly lighting.
A series on topics of relevance and advances from the Technical Centre, Deki Electronics Ltd, India February 2012 Common to almost all eco-friendly lighting. RoHS compliant film capacitors from Deki. www.dekielectronics.com
More informationPHE426 Single metallized film pulse capacitor, polypropylene dielectric According to IEC , grade 1.1
Single metallized film pulse capacitor, polypropylene dielectric According to IEC 60384-16, grade 1.1 TYPICAL APPLICATIONS CONSTRUCTION L B Pulse operation in SMPS, TV, monitor, electrical ballast and
More informationAccording to IEC , grade 1.1
Single metallized film pulse capacitor, polypropylene dielectric According to IEC 60384-16, grade 1.1 TYPICAL APPLICATIONS Pulse operation in SMPS, TV, monitor, electrical ballast and other high frequency
More informationAPS 113 ELECTRO-SEIS Long Stroke Shaker with Linear Ball Bearings Page 1 of 5
Long Stroke Shaker with Linear Ball Bearings Page 1 of 5 The ELECTRO-SEIS shaker is a long stroke, electrodynamic force generator specifically designed to be used alone or in arrays for studying dynamic
More informationInput, Control and Processing elements
PNEUMATIC & HYDRAULIC SYSTEMS CHAPTER FIVE Input, Control and Processing elements Dr. Ibrahim Naimi Valves The function of valves is to control the fluid path or the pressure or the flow rate. Depending
More informationEKT112 Principles of Measurement and Instrumentation. Power Measurement
EKT112 Principles of Measurement and Instrumentation Power Measurement 1 Outline Power? Power in DC and AC Circuits Power Measurements Power Instrumentation (Wattmeter) 2 Concept of Electric POWER Power
More information1ZSC AAA EN, REV. 7. Transformer bushings type GSBK Technical guide
1ZSC563-AAA EN, REV. 7 Transformer bushings type GSBK Technical guide Original instruction The information provided in this document is intended to be general and does not cover all possible applications.
More informationSensors & Controls. Everything you wanted to know about gas engine ignition technology but were too afraid to ask.
Everything you wanted to know about gas engine ignition technology but were too afraid to ask. Contents 1. Introducing Electronic Ignition 2. Inductive Ignition 3. Capacitor Discharge Ignition 4. CDI vs
More informationMiniature Aerial Vehicle. Lecture 4: MEMS. Design Build & Fly MIT Lecture 4 MEMS. IIT Bombay
Lecture 4 MEMS MEMS Micro Electrical Mechanical Systems Practice of making and combining miniaturized mechanical and electrical components Micromachines in Japan Microsystems Technology in Europe MEMS
More information4648, 4648V1 Power Tube
4648, 4648V1 Power Tube RF Power Amplifier Tetrode CW Output Up To 350 kw Pulsed Output Up To 1000 kw Peak Operation To 45 MHz PowerGainUpTo28dB The BURLE 4648 is designed to operate in a wide variety
More informationOTCF. Grid Solutions. Capacitor Voltage Transformers 72.5 kv to 800 kv. Quality Product Design. Seismic Withstand Capability.
GE Grid Solutions OTCF Capacitor Voltage Transformers 72.5 kv to 800 kv In high and extra high voltage transmission systems, capacitor voltage transformers (CVTs) are used to provide potential outputs
More informationAPEC 2011 Special Session Polymer Film Capacitors March 2011
This presentation covers current topics in polymer film capacitors commonly used in power systems. Polymer film capacitors are essential components in higher voltage and higher current circuits. Unlike
More informationCeramic PTC Thermistor:
Motor Starter In starter circuit for single-phase a.c. motor, CPTC thermistor is in series connection with starting winding of motor. When motor starts, initial resistance of CPTC thermistor is low and
More informationDC CIRCUITS ELECTROMAGNETISM
DC CIRCUITS 1. State and Explain Ohm s Law. Write in brief about the limitations of Ohm s Law. 2. State and explain Kirchhoff s laws. 3. Write in brief about disadvantages of series circuit and advantages
More informationELECTRICAL MEASURING INSTRUMENT CHAPTER 15 ELECTRICAL MEASURING INSTRUMENTS THE MOVING COIL GALVANOMETER The moving coil galvanometer is a basic electrical instrument. It is used for the detection or measurement
More informationReducing. with Current. arc flash note 2. points of interest. Why Use Current Limiting Fuses. By mike lang, Principal field engineer
Reducing Arc Energies with Current Limiting Fuses arc flash note 2 By mike lang, Principal field engineer Why Use Current Limiting Fuses Current limiting fuses can reduce both the magnitude and duration
More informationTechnical information No. 01. IT systems. The basis for reliable power supply
IT systems The basis for reliable power supply FA01en/01.2004 IT systems The basis for reliable power supply in critical areas The advantages of sophisticated industrial systems can only be of use, if
More informationDESIGN AND DEVELOPMENT OF A DIELECTRIC SENSOR FOR FLEXIBLE FUEL VEHICLES
DESIGN AND DEVELOPMENT OF A DIELECTRIC SENSOR FOR FLEXIBLE FUEL VEHICLES B.Vasanthan 1, G.Devaradjane 2, Rajesh Murukesan 3, G.Yogeshwaran 4, S.Senthilkumar 5 1,2,4,5 ( Department Of Automobile Engineering,
More informationSafe, fast HV circuit breaker testing with DualGround technology
Safe, fast HV circuit breaker testing with DualGround technology Substation personnel safety From the earliest days of circuit breaker testing, safety of personnel has been the highest priority. The best
More informationPORTABLE PRODUCTS for Field Testing High Voltage High Current High Power Test Systems and Components
PORTABLE PRODUCTS for Field Testing High Voltage High Current High Power Test Systems and Components WWW.HUIBERS.INFO 2 PORTABLE PRODUCTS FOR FIELD TESTING PORTABLE PRODUCTS for FIELD TESTING PHENIX Technologies
More informationConstruction of Magnetic Buzzer
Construction of Magnetic Buzzer Construction of Magnetic Buzzer Operation principles and construction These types of electro magnetic transducer(as Fig.1)contain coils which are would in such a manner
More information3TM Vacuum Contactors
Catalog Extract HG 11.23 Edition 2016 Catalog Extract Medium-Voltage Equipment siemens.com/3tm R-HG11-343.psd 2 Siemens HG 11.23 2016 Contents Medium-Voltage Equipment Catalog Extract HG 11.23 2016 Contents
More informationInstructions & Applications for. Tesla Coil
Instructions & Applications for Tesla Coil Introduction:- The Tesla Coil is an air-core transformer with primary and secondary coils tuned to resonate. The primary and secondary circuits function as step-up
More informationHorizontal Circuit Switchers
> Transformer Protection > CIRCUIT SWITCHERS C A T A L O G B U L L E T I N General Application Southern States Types CSH and CSH-B Horizontal Circuit Switchers provide an economical, versatile, space saving
More informationResin Impregnated Paper Bushing, Oil to SF 6. , Type GSBK
1ZSC563-AAA en, Rev. 2 Resin Impregnated Paper Bushing, Oil to SF 6, Type GSBK Technical guide This Technical Guide has been produced to allow transformer manufacturers, and their designers and engineers,
More informationA-C Capacitors for Motor Run Applications
CPD 510 03 / 08 A-C Capacitors for Motor Run Applications Capacitor Application Data Sheet To ensure correct selection of a capacitor for your application, please provide the information indicated below.
More information(with Class-1 AC resistive load) 3. G3PB-215B-2N-VD kW max. (25 A) G3PB-225B-3N-VD 2. G3PB-225B-2N-VD kw max. (35 A) G3PB-235B-3N-VD 2
Solid-state Contactor (New Heat Sink Construction) G3PB Space and working time saved with new heat sink construction. Series now includes 480-VAC models to allow use in a greater range of applications.
More informationPRODUCT SPECIFICATIONS
KLR Series Three Phase Reactors PRODUCT SPECIFICATIONS Lifetime Warranty Performance Guarantee K-Rated, UL/ULC-Recognized; CSA-Certified 3 Phase, 600V Class Gapped Iron Core Inductor All Copper Windings
More informationExamples of Electric Drive Solutions and Applied Technologies
Examples of Electric Drive Solutions and Applied Technologies 2 Examples of Electric Drive Solutions and Applied Technologies Atsushi Sugiura Haruo Nemoto Ken Hirata OVERVIEW: Hitachi has worked on specific
More informationELECTROMAGNETIC INDUCTION. FARADAY'S LAW
1. Aim. Physics Department Electricity and Magnetism Laboratory. ELECTROMAGNETIC INDUCTION. FARADAY'S LAW Observe the effect of introducing a permanent magnet into a coil. Study what happens when you introduce
More informationDanyal Education (Contact: ) A commitment to teach and nurture. c) sketch a graph of voltage output against time for a simple a.c.
(Contact: 9855 9224) Electricity and Magnetism: Electromagnetic Induction (*) (#) Candidates should be able to: a) deduce from Faraday s experiments on electromagnetic induction or other appropriate experiments:
More informationChapter 5. Protection Circuit Design
Chapter 5 Protection Circuit Design CONTENTS Page 1 Short circuit (overcurrent) protection 5- Overvoltage protection 5-6 This section explains the protection circuit design. 5-1 1 Short circuit (overcurrent)
More informationOutdoor live tank SF6 circuit breaker EDT with integrated current transformer up to 72.5 kv
Outdoor live tank SF6 circuit breaker EDT with integrated current transformer up to 72.5 kv SF6 circuit breaker EDT with integrated current transformer ABB is a world leader in live tank circuit breaker
More informationChristian Ohler, ABB Switzerland Corporate Research Physics of Electric Power Systems. ABB Group August 1, 2012 Slide 1
Christian Ohler, ABB Switzerland Corporate Research Physics of Electric Power Systems ABB Group August 1, 2012 Slide 1 Purpose of this Presentation Describe power systems from a physicists point of view
More informationOverview Overvoltage protection
A P P L I C AT I O N N OT E 1.0 Overview Overvoltage protection The APPLICATION NOTES (AN) are intended to be used in conjunction with the APPLICATION GUIDELINES Overvoltage protection Metal-oxide surge
More informationA low loss mechanical HVDC breaker for HVDC Grid applications THOMAS ERIKSSON, MAGNUS BACKMAN, STEFAN HALÉN ABB AB, CORPORATE RESEARCH SWEDEN
21, rue d Artois, F-75008 PARIS B4-303 CIGRE 2014 http : //www.cigre.org A low loss mechanical HVDC breaker for HVDC Grid applications THOMAS ERIKSSON, MAGNUS BACKMAN, STEFAN HALÉN ABB AB, CORPORATE RESEARCH
More informationSTI LVDT Displacement Sensors
STI LVDT Displacement Sensors The LVDT Still the most reliable and widely used displacement transducer available today. The best performance to cost ratio of any of its rival products in today s market.
More informationModel Number Structure
Solid State Relays (Single-phase) G3PB New Single-phase Solid State Relays with Compact Size for Heater Control Slim models with a thickness of only 22.5 mm are also available. Compact design achieved
More informationAir Bearing Shaker for Precision Calibration of Accelerometers
Air Bearing Shaker for Precision Calibration of Accelerometers NOMENCLATURE Jeffrey Dosch PCB Piezotronics 3425 Walden Avenue, Depew NY DUT Device Under Test S B DUT sensitivity to magnetic field [(m/sec
More informationReverse power relay and protection assemblies
Reverse power relay and protection Page 1 Issued June 1999 Changed since July 1998 Data subject to change without notice (SE980053) (SE980054) Features Micro-processor based time directionalcurrent relay/protection
More informationVisual comparison of Plain & Hazy PP Film
ECOVAR High Voltage Power Capacitors are manufactured at our Sinnar Plant in India which is an ISO 9001 accredited facility & houses a computer aided design manufacturing processing and testing infrastructure
More informationFixed Input Voltage DC/DC Converters Application Guide G. Electromagnetic Interference and Electromagnetic Compatibility...
Fixed Input Voltage DC/DC Converters Application Guide 2017 I. Selection Guide...2 A. Selecting Power Supply...2 B. Designing Power Distribution System...3 II. DC/DC Converter Testing Suggestions... 6
More informationPhased Out Products SB100A. Magnetic Pulse Pickup DESCRIPTION TECHNICAL DATA ORDERING INFORMATION. BLN Issued: February 1992
DESCRIPTION SB100A The SB100A is a self-generating variable reluctance speed sensor that is designed for rugged outdoor, mobile, or heavy industrial applications. It can be used for measurement, control,
More informationStudy of Fault Clearing by A Circuit Breaker In Presence of A Shunt Capacitor Bank
Day 2 - Session V-B 299 Study of Fault Clearing by A Circuit Breaker In Presence of A Shunt Capacitor Bank Murali Kandakatla, B. Kondala Rao, Gopal Gajjar ABB Ltd., Maneja, Vadodara, India Thane Introduction
More informationUniversity of Florida Low Cost Solar Driven Desalination
132 P a g e University of Florida Low Cost Solar Driven Desalination PI: James Klausner Students: Fadi Alnaimat/Ph.D. Mechanical Engineering Description: Water and energy scarcity poses a future threat
More informationPower Factor Improvement
Power Factor Improvement The following devices and equipments are used for Power Factor Improvement. Static Capacitor Synchronous Condenser Phase Advancer 1. Static Capacitor We know that most of the industries
More informationABB n.v Power Quality in LV installations
ABB n.v. - 1 - Power Quality in LV installations PQ problems in LV installations 750 500 250 Volts 0-250 -500 Amps -750 3000 2000 1000 0-1000 -2000-3000 10:25:43.72 10:25:43.73 10:25:43.74 10:25:43.75
More informationPURE PHYSICS ELECTRICITY & MAGNETISM (PART I)
PURE PHYSICS ELECTRICITY & MAGNETISM (PART I) 1 A student walks across a thick carpet and becomes positively charged as his shoes rub on the carpet. When he touches the metal handle of a door, negative
More informationCh 4 Motor Control Devices
Ch 4 Motor Control Devices Part 1 Manually Operated Switches 1. List three examples of primary motor control devices. (P 66) Answer: Motor contactor, starter, and controller or anything that control the
More informationINSTRUCTION MANUAL. Type SWF. Sine Wave Filters 480 Volts, 60Hz. Page 1 of 14. April 15, 2010: updated capacitor UL File number)
POWER QUALITY INSTRUCTION MANUAL Type SWF Sine Wave Filters 480 Volts, 60Hz April 15, 2010: updated capacitor UL File number) Page 1 of 14 Contents 1. Introduction & SAFETY 2. Theory of operation 3. Advantage
More informationShock tube based dynamic calibration of pressure sensors
Shock tube based dynamic calibration of pressure sensors C. E. Matthews, S. Downes, T.J. Esward, A. Wilson (NPL) S. Eichstädt, C. Elster (PTB) 23/06/2011 1 Outline Shock tube as a basis for calibration
More informationCHAPTER 5 FAULT AND HARMONIC ANALYSIS USING PV ARRAY BASED STATCOM
106 CHAPTER 5 FAULT AND HARMONIC ANALYSIS USING PV ARRAY BASED STATCOM 5.1 INTRODUCTION Inherent characteristics of renewable energy resources cause technical issues not encountered with conventional thermal,
More informationChandrashekar.p. Electrical and Electronics Engineering, PESITM-Shivamogga, Karnataka-India
Protection and Control of Electrically Operated Over-Head Track Cranes (EOT) Using Multi-Functional Programmable Counter and Inductive Proximity Sensor. Chandrashekar.p Electrical and Electronics Engineering,
More informationSVE135 Sealed High-Voltage Contactor Having High Overcurrent Withstand Capability
VE135 ealed High-Voltage Contactor Having High Over Withstand Capability AKA, Yasuhiro * HIBA, Yuji * AKURAI, Yuya * A B T R A C T The spread of environmentally friendly vehicles mounted with large-capacity
More informationEnhancement of Power System Stability Using Thyristor Controlled Series Compensator (TCSC)
Enhancement of Power System Stability Using Thyristor Controlled Series Compensator (TCSC) Pooja Rani P.G. Research Scholar in Department of Electrical Engg. MITM, Hisar, Haryana, India Mamta Singh Assistant
More informationHV803, HV8051, and HV8053 EL Lamp Driver Circuits
HVXX Series Application Note ANH HV0, HV0, and HV0 Driver Circuits Introduction This application note describes the operation of Supertex EL (Electroluminescent) lamp drivers, provides guidelines for proper
More informationW SERIES IMPULSE VOLTAGE TEST SYSTEM APPLICATION FEATURES
W SERIES IMPULSE VOLTAGE TEST SYSTEM Impulse Voltage Test System is used to generate impulse voltages from 100 KV to 2400 KV simulating lightning strokes and switching surges with energies up to 240 KJ.
More informationAPS 400 ELECTRO-SEIS. Long Stroke Shaker Page 1 of 5. Applications. Features
Long Stroke Shaker Page 1 of 5 The APS 400 ELECTRO-SEIS is a force generator specifically designed to be used alone or in arrays for studying dynamic response characteristics of various structures. It
More informationHS-1000 Fast Low Noise High Voltage Switch
HS-1000 Fast Low Noise High Voltage Switch HS-1000_User_Manual_1_4doc 18. January 2018 Data Sheet & User Manual Rev. 1.4 Applications: Ion Pulsing / Electrode Switching Piezo-Driver Features: fast and
More informationElectrostatic Ignition Hazards Associated with the Pneumatic Transfer of Flammable Powders through Insulating or Dissipative Tubes and Hoses
691 A publication of CHEMICAL ENGINEERING TRANSACTIONS VOL. 31, 2013 Guest Editors: Eddy De Rademaeker, Bruno Fabiano, Simberto Senni Buratti Copyright 2013, AIDIC Servizi S.r.l., ISBN 978-88-95608-22-8;
More informationHorizontal Circuit Switchers
> Transformer Protection > CIRCUIT SWITCHERS C A T A L O G B U L L E T I N General Application Southern States Types CSH and CSH-B Horizontal Circuit Switchers provide an economical, versatile, space saving
More informationSeries ITV0000. Compact Electro-pneumatic Regulator ITV N. IITV00 02 n. How to Order F.R.L. AV AU AF AR IR VEX AMR ITV IC VBA VE VY1 G PPA AL
Compact Electro-pneumatic Regulator Series For single unit and single unit for manifold Pressure range 9 Option. MPa. MPa.9 MPa kpa Option How to Order N Power supply voltage 24 VDC ±% 2 to VDC Option
More informationRadiant High Voltage. Displacement Measurement Fixture. Construction. Introduction. Figure 1
Radiant High Voltage Displacement Measurement Fixture Introduction Radiant Technologies, Inc. offers four types of high voltage test fixtures. One, the High Voltage Test Fixture (HVTF), has been very popular
More informationPrinciples and types of analog and digital ammeters and voltmeters
Principles and types of analog and digital ammeters and voltmeters Electrical voltage and current are two important quantities in an electrical network. The voltage is the effort variable without which
More informationDesigning R2CD Snubbers Using Standard Recovery Diodes
Designing R2CD Snubbers Using Standard Recovery Diodes RCD snubbers are widely used to limit peak voltage stress in switch mode power supplies, SMPS. The idea of using a slow diode in this application,
More informationAIR INSULATED EXTENDABLE SWITCHGEAR UP TO 12KV GUIDE
AIR INSULATED EXTENDABLE SWITCHGEAR UP TO 12KV GUIDE Certificate Number FM35831 APPLICATION Typical Uses and Classification The MSGair switchgear is used in transformer and switching substations mainly
More informationFast thyristors. When burning for induction heating solutions.
Fast thyristors. When burning for induction heating solutions. By Ladislav Radvan, ABB s.r.o., Semiconductors. Published by Power Electronics Europe (August 2014) Induction heating is one of the key metal
More informationITVX Series. Stepless control of air pressure proportional to an electrical signal. Supply pressure: 5.0 MPa
5.0 MPa Maximum Supply Pressure High Pressure Electro-Pneumatic Regulator X Series This product is only for blowing gas. This product does not have sufficient pressure control for other applications (driving,
More informationPART 1. Power Management
PART 1 Power Management Section 1 Power Management Tutorials Ceramic input capacitors can cause overvoltage transients (1) When it comes to input filtering, ceramic capacitors are a great choice. They
More informationAbstract. Benefits and challenges of a grid coupled wound rotor synchronous generator in a wind turbine application
Issue #WP102: Technical Information from Cummins Generator Technologies Benefits and challenges of a grid coupled wound rotor synchronous generator in a wind turbine application White Paper Ram Pillai
More informationInductive Power Supply (IPS ) for the Transrapid
Inductive Power Supply (IPS ) for the Transrapid M. Bauer, P. Becker & Q. Zheng ThyssenKrupp Transrapid GmbH, Munich, Germany ABSTRACT: At velocities below 100 km/h and during stops the Transrapid vehicle
More informationCHAPTER 4 MR DAMPER DESIGN. In this chapter, details of MR damper geometry and magnetic circuit design are provided.
CHAPTER 4 MR DAMPER DESIGN In this chapter, details of MR damper geometry and magnetic circuit design are provided. Additional practical considerations for MR damper design, such as damper piston centering
More informationINSTRUCTION MANUAL 272-5X5 ANALOG TRANSMITTER (210 SERIES FLOW METERS) 272-5X7 ANALOG TRANSMITTER (220/240 SERIES FLOW METERS)
INSTRUCTION MANUAL 272-5X5 ANALOG TRANSMITTER (210 SERIES FLOW METERS) 272-5X7 ANALOG TRANSMITTER (220/240 SERIES FLOW METERS) 272-5X8 BIDIRECTIONAL TRANSMITTER (210/240 SERIES FLOW METERS) TABLE OF CONTENTS
More informationMulti-purpose percentage restraint differential protection
Multi-purpose percentage restraint Page 1 Issued June 2002 Changed since June 1999 Data subject to change without notice (SE970169) Features Complete phase and earth fault protection for generators, motors,
More information