CDL STACKABLE CIRCUIT
|
|
- Flora Dennis
- 5 years ago
- Views:
Transcription
1 CD A09 DC COI CH. I PAGE 67 CONNECTORS STANDARD CH. I PAGE 9 CD STACKABE CIRCUIT SEECTOR VAVES The stackable circuit selector valves, type CD.04.6, allows one single drive of 5 users with 4 elements connected in series. As they are moved from high performances solenoids they don t need the external drainage. Additionally, beyond having a reduced and compact dimensions, they can manage high hydraulic powers with a minimal pressure drop. OFF-HIGHAY ACHINERY ax. pressure 250 bar ax. flow 20 l/min Overlap positive Hydraulic fluids ineral oils DIN 5524 Fluid viscosity mm 2 /s ax. contamination level class 0 in accordance NAS with 638 with filter ß see Overall dimension CD Stackable circuit selector valve 04 Size NG04 (single element) I Threaded connectors /4 BSP Internal drainage * No. of elements: / 2 / 3 / 4 * Voltage (Tab. ) ** Variants (Tab. 2) Serial No. VARIANTE N 48V* P 0V* Z 02V* TAB. - A09 (27 ) COI DC VOTAGE 2V X 205V* ithout DC coil 5Vac/50Hz 20Vac/60Hz 230Vac/50Hz 240Vac/60Hz * Special voltage The AP Junior coil and with the flying leads (with or without diode) coils are available in 2V or DC voltage only. The Deutsch coil with bidirectional diode is available in 2V DC voltage only. TAB. 2 - VARIANTI CODE No variant 00 V X Solenoid valve without connectors S Cable gland "PG " C Rotary emergency button P Emergency button E AP Junior connection AJ Bobina con fili (250 mm) F with flying leads (30 mm) and integr. diode D Deutsch connection with bidir. diode CX Other variants relate to a special design. HYDRAUIC SYBOS SINGE EEENT UTI STATION CONNECTION IITS OF USE P (bar) P C P C2 P2 C3 P2 C4 P (bar) Energizing De-energizing eakages: 0 cc/min with rest carried out at a fluid temperature of 40 C with a pressure at 200 bar; the fluid used was a mineral based oil with viscosity of 46 mm 2 /s at 40 C. The tests have been carried out with solenoids at operating temperature and a voltage 0% less than rated voltage with a fluid temperature of 50 C. The fluid used was a mineral oil with a viscosity of 46 mm 2 /s at 40 degrees C. File: ECD0400 I 6 03/2002/e
2 CD STACKABE CIRCUIT SEECTOR VAVES OVERA DIENSIONS OFF-HIGHAY ACHINERY Fixing screws with material specificationmin. 8.8 Tighten the screws to a torque of 5 Nm (0.5 Kgm) No. of No. of Fixing Kit spare part code* elements way (ength) (Kg) screws (rods and studs) 06 46,05 - / ,20 TCEI 5x95 V ,30 TCEI 5x40 V ,45 TCEI 5x94 (special rods) V (*) For multiple composition rods and studs are available. Support plane specifications File: ECD0400 I 62 03/2002/e
3 CD DC COI CH. I PAGE 68 CONNECTORS STANDARD CH. I PAGE 9 CD STACKABE CIRCUIT SEECTOR VAVES The stackable circuit selector valves, type CD.06.6, allows one single drive of 6 users with 5 elements connected in series. As they are moved from high performances solenoids they don t need the external drainage. This valves can manage high hydraulic powers with a minimal pressure drop. OFF-HIGHAY ACHINERY ax. pressure 250 bar ax. flow 50 l/min Overlap negative Hydraulic fluids ineral oils DIN 5524 Fluid viscosity mm 2 /s ax. contamination level class 0 in accordance NAS with 638 with filter ß see Overall dimension HYDRAUIC SYBOS SINGE EEENT CD Stackable circuit selector valve 06 Size NG06 (single element) TAB COI DC VOTAGE 2V ithout DC coil UTISTATION CONNECTION I Threaded connectors 3/8 BSP Internal drainage * No. of elements: / 2 / 3 / 4 / 5 * Voltage (Tab. ) ** Variants (Tab. 2) Serial No. TAB.2 - VARIANTS No variant 00 (connectors as in the drawing) V X Valve without connector (coil) S Emergency button E OVERA DIENSIONS P (bar) P C, P C2, P2 C3 et P2 C4 The fluid used is a mineral oil with a viscosity of 46 mm 2 /s at 40 C; the tests have been carried out at a fluid temperature of 40 C. Fixing screws UNI 593 6x60 with material specification min. 8.8 Tightening torque for studs 8 Nm / 0.8 Kgm Tightening torque for rods 20 Nm / 2 Kgm No. of No. of A B C Kit spare part code* elements way engths (mm) (Kg) (rods and studs) / ,3 V ,3 V ,3 V ,3 V (*) For multiple composition rods and studs are available. File: ECD0600 I 63 0/2004/e
4 AD FO DIVERSION VAVES AD D5 DC COI CH. I PAGE 67 STANDARD CONNECTORS CH. I PAGE 9 The 6 way flow diversion valves are special solenoid valves which allow the simultaneous connection of two systems. In order to obtain valve's working at pressure of 250 bar up to 320 bar (exeternal drainge) the G /8" BSP plug must be removed to Y connector. ax. pressure (without drainage, Y pluged) 250 bar ax. pressure (external drainage) 320 bar ax. flow 40 l/min Overlap negative Fluid viscosity mm 2 /s ax. contamination level class 0 in accordance with NAS 638 with filter ß ,4 Kg AD06 Flow diversion valves NG6 Threaded connectors 3/8"BSP I ithout drainage Y connector pluged * Voltage (see table ) ** Variants (see table 2) 3 Serial No. TAB.2 - VOTAGE D5 COI (30) 2V V 28V* N 48V* Z 02V* P 0V* R 205V* 5Vac/50Hz 20Vac/60Hz 230Vac/50Hz 240Vac/60Hz ithout DC coils and connectors * Special voltage AP Junior (with or without diode) and Deutsch and with flying leads coils, are available in 2V or DC voltage only. Plastic type coils are available in 2V,, 28V or 0V DC voltage only. DRAINS AND HYDRAUIC SYBOS ITHOUT DRAINAGE - Y PUGED EXTERNA DRAINAGE Opening for drainage TAB.2 - VARIANTS VARIANT CODE No variant (connectors as in the drawing) 00 V X Flow diversion without connector (coil) S AP Junior coil AJ AP Junior coil and integrated diode AD Coil with flyning leads (75mm) S Deutsch DT04-2P Coil type CZ Plastic type coil BR Curve n : P C P C2 P2 C3 P2 C4 p (bar) Support plane specifications File: EAD06003 Fixing screws UNI 593 5x60 with material specification min. 8.8 I 64 eakages: 0 cc/min with rest carried out at a fluid temperature of 40 C with a pression at 200 bar; the fluid used was a mineral based oil with viscosity of 46 mm 2 /s at 40 C. 05/2000/e
5 CD A6 DC COI CH. I PAGE 68 CONNECTORS STANDARD CH. I PAGE 9 CD Stackable circuit selector valve 0 Size NG0 (single element) I Threaded connectors /2 BSP Internal drainage * No. of elements: / 2 / 3 / 4 / 5 * Voltage (Tab. ) ** Variants (Tab. 2) CD STACKABE CIRCUIT SEECTOR VAVES The stackable circuit selector valves, type CD.0.6, allows one single drive of 6 users with 5 elements connected in series. As they are moved from high performances solenoids they don t need the external drainage. This valves can manage high hydraulic powers with a minimal pressure drop. N 48V* P 0V* Z 02V* TAB. - A6 COI DC VOTAGE 2V X 205V* ithout DC coil 5Vac/50Hz 20Vac/60Hz 230Vac/50Hz 240Vac/60Hz * Special voltage TAB.2 - VARIANTS No variant 00 (connectors as in the drawing) V X Valve without connector (coil) S Emergency button E OFF-HIGHAY ACHINERY ax. pressure 250 bar ax. flow 80 l/min Overlap negative Hydraulic fluids ineral oils DIN 5524 Fluid viscosity mm 2 /s ax. contamination level class 0 in accordance NAS with 638 with filter ß 25 ³75 see Overall dimension HYDRAUIC SYBOS SINGE EEENT UTISTATION CONNECTION Serial No. OVERA DIENSIONS P (bar) P C, P C2, P2 C3 et P2 C4 The fluid used is a mineral oil with a viscosity of 46 mm 2 /s at 40 C; the tests have been carried out at a fluid temperature of 40 C. Fixing screws UNI 593 6x60 with material specification min. 8.8 Tightening torque for studs 8 Nm / 0.8 Kgm Tightening torque for rods 20 Nm / 2 Kgm No. of No. of A B C Kit spare part code* elements way engths (mm) (Kg) (rods and studs) ,5 / ,3 V V ,5 V ,3 V (*) For multiple composition rods and studs are available. File: ECD000 I 65 0/2002/e
6 AD A6 DC COI CH. I PAGE 68 STANDARD CONNECTORS CH. I PAGE 9 AD0 Flow diversion valves NG0 J Connectors 3/4"BSP AD FO DIVERSION VAVES The 6 way flow diversion valves are special solenoid valves which allow the simultaneous connection of two systems. In order to obtain valve's working at pressure of 250 bar up to 320 bar (external drainage) the G /8" BSP plug must be removed to Y connector. N 48V* P 0V* Z 02V* TAB. - A6 COI DC VOTAGE 2V X 205V* ithout DC coil 5Vac/50Hz 20Vac/60Hz 230Vac/50Hz 240Vac/60Hz * Special voltage ax. pressure (without drainage, Y plugged) 250 bar ax. pressure (external drainage) 320 bar ax. flow 80 l/min Fluid viscosity mm 2 /s ax. contamination level class 0 in accordance with NAS 638 with filter ß ,6 Kg DRAINS AND HYDRAUIC SYBOS ITHOUT DRAINAGE - Y PUGGED I ithout drainage Y connector plugged * Voltage (see table ) ** Variants (see table 2) Serial No. EXTERNA DRAINAGE TAB.2 - VARIANTS VARIANT CODE No variant (connectors as in the drawing) 00 V X Flow diversion without connector (coil) S Opening for drainage p (bar) Support plane specifications Fixing screws UNI 593 6x90 with material specification min. 8.8 File: EAD000 I 66 03/2000/e
7 DC COIS A09 FOR CD Type of protection (in relation to connector used) IP 65 Number of cycle 8.000/h Supply tolerance ±0% Ambient temperature -30 C 60 C Duty cycle 00% ED Insulation class H 0,25 Kg The AP Junior coil and with the flying leads (with or without diode) coils are available in 2V or DC voltage only. The Deutsch coil with bidirectional diode is available in 2V DC voltage only. OTHER COIS (VARIANTS) AP JUNIOR (AJ) VOTAGE AX INDING TEPERATURE RATED POER RESISTANCE AT 20 C (V) (ABIENT TEPERATURE 25 C) () (OH) ±7% 2V 23 C C V* 23 C V* 23 C V* 23 C V* 23 C * Special voltages ETA09-02/200/e DEUTSCH COI ITH BIDIR. DIODE (CX) FYING EADS (F) EADS ITH DIODO (D) ANUA EERGENCY (E) ROTARY EERGENCY (P) DC COI D5 FOR AD06... OTHER COIS (VARIANTI) AP JUNIOR (AJ) AP J. ITH DIODE (AD) FYING ITH EADS COI (S) Type of protection (in relation to the connector used) IP 66 Number of cycles 8.000/h Supply tolerance ±0% Ambient temperature -54 C 60 C Duty cycle 00% ED Insulation class H 0,354 Kg AP Junior coils (with or without diode) and coils with flying leads and coils type Deutsch, are available in 2V or DC voltage only. The pastic type coil (BR variant) is available in 2V,, 28V or 0V DC voltage only. VOTAGE AX. INDING TEPERATURE RATED POER RESISTANCE AT 20 C (V) (ABIENT TEPERATURE 25 C) () (OH) ±0% 2V 0 C C V* 0 C V* 0 C V* 0 C V* 0 C V* 0 C (*) Special voltages ETD5-03/200/e DEUTSCH COI (CZ) PASTIC COI (BR) ANUA EERGENCY (E) ROTARY EERGENCY (P) 56,6 68,65 File: ETA09D5 57,9 I 67 05/200/e
8 DC COI 40 FOR CD06... VARIANT ITH AN. EERGENCY E VARIANT ITH ROT. EERGENCY P Type of protection (in relation to the connector used) IP 66 Number of cycles 8.000/h Supply tolerance +0% / -0% Ambient temperature -54 C 60 C Duty cycle 00% ED Insulation class H 0,354 Kg VOTAGE AX. INDING TEPERATURE RATED POER RESISTANCE AT 20 C (V) (ABIENT TEPERATURE 25 C) () (OH) ±0% 2V IT40-00/2004/e DC COI A6 FOR AD.0 AND CD.0 VARIANT ITH AN. EERGENCY E VARIANT ITH ROT. EERGENCY P Type of protection (in relation to the connector used) IP 65 Number of cycles 8.000/h Supply tolerance ±0% Ambient temperature -30 C 60 C Duty cycle 00% ED Insulation class H 0,9 Kg VOTAGE AX. INDING TEPERATURE RATED POER RESISTANCE AT 20 C (V) (ABIENT TEPERATURE 25 C) () (OH) ±7% 2V 06 C C 45 2,4 48V* V* V* 8 C V* (*) Special voltage ETA6-03/2002/e File: ET40A6 I 68 04/2000/e
9 CONNECTORS DIRECTIONA CONTRO VAVES IN ACCORDANCE ITH DIN 43650/ISO4400 CONNECTOR VOTAGE CODE *SPECIA VOTAGE (VARIANTS) STANDARD (IP65) Grey (side A) V No variant Black (side B) V TYPE ITH CABE GAND PG Grey (side A) Black (side B) V V ENS COVER ITH PIOT IGHT 2 VAC/VDC V (sides A and B) 24 VAC/VDC V VAC/VDC V VAC/VDC V ITH RECTIFIER Grey (side A) Black (side B) Inlet voltage: 2 220VAC Rectified voltage: 9 200VDC ENS COVER ITH V V PIOT IGHT AND RECTIFIER 2 VAC V VAC V (sides A and B) 48 VAC* V VAC* V VAC* V C X TYPE OF PROTECTION IP67 Grey (side A) Black (side B) V V CN EECTRICA FEATURES OF CONNECTORS It is suggest the use of the CN connector type (IP67) with the variant BR coil, which made in plastic material. Seal ISO 4400 standard connector type spacer cable gland Cable gland PG09 Ø sheath 6 8 mm CONNECTORS IP 65 (STANDARD) AC rated voltage ax. 250 V DC rated voltage ax. 300 V Pin conctat rated flow 0A Pin conctat max. flow 6A ax. section cable,5 mm 2 Ø Cable gland PG09-6x,5 6 8 mm Type of protection IP65 EN60529 Insulation class VDE 00-/89 Operating temperature -40 C 90 C Seal Screw thread PG9 Seal Exagonal key 9 mm. Ø cable 4 7 mm CONNECTORS IP67 (CN VARIANT) AC rated voltage ax. 250 V DC rated voltage ax. 300 V Pin conctat rated flow 0A Pin conctat max. flow 6A ax. section cable,5 mm 2 Ø Cable gland PG09-6x,5 4 7 mm Type of protection IP67 EN60529 Insulation class VDE 00-/89 Operating temperature -20 C 80 C The degrees of protection indicate is guaranteed only if the connectors were properly mounted with his original seals. File: ETCNT000 I 9 04/2000/e
DIRECTIONAL CONTROL VALVES CETOP 3/NG6
CETOP 3/NG06 STANDARD SPOOLS CH. I PAGE 0 AD.3.E... CH. I PAGE AD.3.E...J* CH. I PAGE 2 AD3.XS... CH. I PAGE 3 AD3.XD... CH. I PAGE 4 AD.3.V... CH. I PAGE 5 AD.3.L... CH. I PAGE 6 OTHER OPERATOR CH. I
More informationIntroduction. Pressure drops
Directional control valves CETOP 5/NG0 Introduction The ARON directional control valves NG0 designed for subplate mounting with an interface in accordance with UNI ISO 440-05 - 04-0 - 94 standard (ex CETOP
More informationDIRECTIONAL CONTROL VALVES CETOP 5/NG10
CETOP 5/NG0 STANDARD SPOOLS CH. I PAGE 30 AD.5.E... CH. I PAGE 3 AD.5.E...J* CH. I PAGE 32 AD.5.E...Q5 CH. I PAGE 32 AD.5.O... CH. I PAGE 33 AD.5.D... CH. I PAGE 33 AD.5.L... CH. I PAGE 34 A6 DC SOLENOID
More informationADB.3... DIRECTIONAL CONTROL
SOLENOID VALVES Global solution and hydraulic components DIRECTIONAL CONTROL ADB... DIRECTIONAL CONTROL SOLENOID VALVES CETOP ADB..E...BR.2 (PLASTIC COIL VARIANT) 2100 Reggio Emilia (Italy) 1, Via Natta
More informationTECHNICAL CATALOGUE ARON 2005
AP AS BP H H DA DP TEHNIAL ATALOGUE ARON 2005 ABBREVIATIONS HIGH PRESSURE ONNETION PHASE LAG (DEGREES) LOW PRESSURE ONNETION STROKE (MM) AROSS FLATS INTERNAL AROSS FLATS AMPLITUDE DEAY (DB) DIFFERENTIAL
More informationADH /3 AND 4/2
ADH.7... STANDARD SPOOLS FOR ADH.7 CH. I PAGE 53 ADH.7... CH. I PAGE 54.7... CH. I PAGE 55/56 CETOP 3/NG06 CH. I PAGE 8 STANDARD SPOOLS FOR AD.3.E CH. I PAGE 0 AD.3.E... CH. I PAGE ADC.3... CH. I PAGE
More informationVALVES AND ELECTRONICS. Technical Catalogue
VALVES AND ELECTRONICS Technical Catalogue July 202 VALVES AND ELECTRONICS TECHNICAL CATALOGUE 202 CH. I DIRECTIONAL CONTROL Plant Aron: Via Natta, 4224 Reggio Emilia - Italy Tel. +39 0522 5058 Fax +39
More informationADH /3 AND 4/2
ADH.7... STANDARD SPOOLS FOR ADH.7 CH. I PAGE 53 TECH. SPECIFICATIONS ADH.7... CH. I PAGE 54 SUBPLATES.7... CH. I PAGE 55/56 CETOP 3/NG06 CH. I PAGE 8 STANDARD SPOOLS FOR AD.3.E CH. I PAGE 0 AD.3.E...
More informationCXDH3 / CDH3 - Features
CXDH / CDH - Features CXDH - roportional compensated bankable valves CDH - ON/OFF compensated bankable valves ankable proportional directional valves with signal locally compensated. CXDH/CDH series valves
More information4/3 4/2 Directional valve elements with or without secondary relief valves, and with or without LS connections
RA 183-52/1.11 1/1 4/3 4/2 Directional valve elements with or without secondary relief valves, and with or without LS connections B8_8 (EDBZ) Summary Description Page General specifications 1 Ordering
More informationDIRECTIONAL CONTROL VALVES CETOP 5/NG10
INTRODUCTION The ARON directional control valves NG0 designed for subplate mounting with an interface in accordance with UNI ISO 440-05 - 04-0 - 94 standard (ex CTOP R 35 H 4.2-4-05), and can be used in
More information6/2 ways/positions flow diverters L (VS151-VS152-VS155)
6/2 ways/positions flow diverters L721... (VS151-VS152-VS155) RE 1832-5 Edition: 2.216 Replaces: 5.214 Size 6 Series 1 Maximum operating pressure 31 bar (45 psi) Maximum flow 6 l/min (15.85 gpm) Ports
More informationV*L Pressure control valves in line
V*P / V*L... V*P... cap. II 7 V*PE... cap. II 8 V*L... cap. II 9 - Cap. II 10 BSVMP... cap. II 11 KEC16/5... cap. II 9 C*P16/5... cap. II 9 CETOP 3/NG06 cap. II 8 Standard spools for AD3E Cap. II 10 AD3E...
More information4/3-4/2 Directional valve with solenoid actuation
4/3-4/2 Directional valve with solenoid actuation RE 18305-08/12.13 1/10 L5110 LC1-Z ) Size NG6 ISO 4401-03 CETOP RP121 H-03 CETOP 3) Series 00 Maximum operating pressure 350 bar [5076 psi] Maximum flow
More information6/2 ways/positions flow diverters L (VS120-VS125-VS129)
6/2 ways/positions flow diverters L710... VS120-VS125-VS129) RE 18302-04 Edition: 05.2014 Replaces: 07.12 Size 4 Series 00 Maximum operating pressure 310 bar 4500 psi) Maximum flow 25 l/min 6.6 gpm) Ports
More information6 to 12/2 ways/positions bankable flow diverters flangeable
6 to 12/2 ways/positions bankable flow diverters flangeable RE 18302-08/07.12 Replaces: 12.09 1/8 L711... (VS120F-VS125F) Size 4 Series 00 Maximum operating pressure 310 bar [4500 psi] Maximum flow 20
More information6/2 ways/positions flow diverters
6/2 ways/positions flow diverters RE 18302-07/07.12 Replaces: 12.09 1/8 L753... (VS311-VS312-VS315) Size 10 Series 00 Maximum operating pressure 310 bar [4500 psi] Maximum flow 140 l/min [36,98 gpm] Ports
More information3/2 ways/positions flow diverters L (VS91-VS92-VS95)
3/2 ways/positions flow diverters L706... (VS91-VS92-VS95) RE 18302-03 Edition: 04.2016 Replaces: 02.2016 Size 12 Series 00 Maximum operating pressure 310 bar (4500 psi) Maximum flow 140 l/min (36.98 gpm)
More information6 to14/2 ways/positions bankable flow diverters flangeable
Electric Drives and Controls Hydraulics Linear Motion and Assembly Technologies Pneumatics Service 6 to14/2 ways/positions bankable flow diverters flangeable RE 18302-09/12.09 1/10 L732... (VS241F-VS245F-VS246F-VS247F)
More information6 to14/2 ways/positions bankable flow diverters flangeable
6 to14/2 ways/positions bankable flow diverters flangeable RE 18302-10/07.12 Replaces: 12.09 1/8 L745... (VS281F-VS285F-VS286F-VS287F-VS289F) Size 10 Series 00 Maximum operating pressure 310 bar [4500
More information6/2 ways/positions flow diverters
Electric Drives and Controls Hydraulics Linear Motion and Assembly Technologies Pneumatics Service 6/2 ways/positions flow diverters RE 1832-5/12.9 1/8 L721... (VS151-VS152-VS155) Size 6 Series 1 Maximum
More information4/3-4/2 Directional valve elements with or without secondary relief valves, and with or without LS connections
4/3-4/2 Directional valve elements with or without secondary relief valves, and with or without LS connections RE 183-52/7.12 Replaces: 1.9 1/8 8_8 (EDZ) Size 4 Series Maximum operating pressure 31 bar
More information6/2 ways/positions flow diverters
Electric Drives and Controls Hydraulics Linear Motion and Assembly Technologies Pneumatics Service 6/2 ways/positions flow diverters RE 18302-07/12.09 1/8 L753... (VS311-VS312-VS315) Size 10 Series 00
More information6 to 12/2 ways/positions bankable flow diverters flangeable
Electric Drives and Controls Hydraulics Linear Motion and Assembly Technologies Pneumatics Service 6 to 12/2 ways/positions bankable flow diverters flangeable RE 18302-08/12.09 1/10 L711... (VS120F-VS125F)
More information6 to14/2 ways/positions bankable flow diverters flangeable
Electric Drives and Controls Hydraulics Linear Motion and Assembly Technologies Pneumatics Service 6 to14/2 ways/positions bankable flow diverters flangeable RE 18302-10/12.09 1/8 L745... (VS281F-VS285F-VS286F-VS287F-VS289F)
More information4/3-4/2 Directional valve elements LF1_1 (LC1F-Z)
4/3-4/2 Directional valve elements LF1_1 LC1F-Z) RE 18305-01 Edition: 02.2016 Replaces: 07.12 07.2012 Size 6 Series 00 Maximum operating pressure 310 bar 4500 psi) Maximum flow 35 l/min 9.25 gpm) Ports
More informationCOILS AND CONNECTORS. Atlantic Fluid Tech SECTION 21. Rev. 10/ Connector Page class
SECTION 21 COILS AND CONNECTORS Type Heat insulation Connector Page class Coil M7 HS M7 - For solenoid operated cartridge valve H - 1 C EN 175301-3 - DIN 450 - ISO 4400 21.00.010 Coil M7 HS M7 - For solenoid
More information6/2 WAY DIRECTIONAL VALVE KV (NG 6)
6/2 WAY DIRECTIONAL VALVE KV (NG 6) NG 6 Up to 350 bar [5 076 PSI] Up to 50 L/min [13.2 GPM] Plug-in connector for solenoids to ISO 4400. Threaded connections to ISO 9974 (Metric), ISO 1179 (BSPP/Gas),
More information3/2 ways/positions flow diverters
Electric Drives and Controls Hydraulics Linear Motion and Assembly Technologies Pneumatics Service 3/2 ways/positions flow diverters RE 18302-02/12.09 1/8 L705... (VS81-VS82-VS84-VS85) Size 6 Series 00
More informationType of operation Depending on requirement either one or two dry DC-solenoid,
Features Leakage free High availability 100% duty cycle Porting NG 6 according to DIN 24340 Positive overlap Function and design The seated valves are direct operated. Depending on the desired control
More information4/3-4/2 Directional valve elements B8_0A with or without (EDB-A) secondary relief valves, with or without LS connections B8_0A (EDB-A)
4/3-4/2 Directional valve elements B8_A with or without (EDB-A) secondary relief valves, with or without LS connections B8_A (EDB-A) RE 183-56 Edition: 11.218 Replaces: 7.12 Size 4 Series Maximum operating
More informationDirectional valve elements L808103P (ED4-PT1) of Tank unloaded excess flow. RE Edition: Replaces:
Directional valve elements L80810P with proportional (ED4-PT1) control of Tank unloaded excess flow L80810P (ED4-PT1) RE 1801-1 Edition: 09.2016 Replaces: 07.12 01.2016 Size 6 Series 00 Maximum operating
More information3-Way heavy duty flow control, with pressure compensated and solenoid controlled priority flow
3-Way heavy duty flow control, with pressure compensated and solenoid controlled priority flow A-VRFC3C-VEI-VS 0M.43.20.80 - Y - Z RE 18309-3 Edition: 03.2018 Replaces: 03.2016 Technical data Description
More information3-Way heavy duty flow control, with pressure compensated, solenoid and load sensing controlled priority flow
3-Way heavy duty flow control, with pressure compensated, solenoid and load sensing controlled priority flow A-VRFC3C-VEI-VS-LS 0M.43.21.80 - Y - Z RE 18309-63 Edition: 03.2018 Replaces: 03.2016 Technical
More informationStand alone 4/3, 4/2 direct acting directional valve LF2_1 (LC2F-DZ)
Stand alone 4/3, 4/2 direct acting directional valve LF2_1 (LC2F-DZ) RE 18305-03 Edition: 02.2016 Replaces: 07.12 07.2012 Size 10 Series 00 Maximum operating pressure 250 bar (3600 psi) Maximum flow 90
More informationDirectional Control Valve Series D3W Soft Shift
Characteristics The D3W is a 3-chamber, electrically controlled 4/3 or 4/ way directional control valve. It is activated directly by solenoids with screwed in wet pin armature. The soft shifting of this
More informationGP PUMP SIZE GP1 GP2 GP3 Displacement range cm 3 /rev clockwise, anticlockwise or reversible (seen from the shaft side)
11 1/117 ED GP EXTERNA GEAR PUPS OPERATING PRINCIPE The GP pumps are fixed displacement external gear pumps with axial clearance compensation. They give high volumetric efficiency even with high operating
More informationSeated valves 500 bar
Seated valves 500 bar Type WVM-6I Features Solenoid actuated and direct operated Leakage free in every direction (double tight) High operational safety and reliable switching High duty cycles and long
More information3-Way heavy duty flow control, with pressure compensated and solenoid controlled priority flow
3-Way heavy duty flow control, with pressure compensated and solenoid controlled priority flow A-VRFC3C-VEI-VS 0M.43.20.80 - Y - Z RE 18309-3 Edition: 03.2016 Replaces: 06.2010 Technical data Description
More informationSeries PD directly operated solenoid valves
> Series PD solenoid valves CATALOGUE > Release 8.7 Series PD directly operated solenoid valves New /-way Normally Closed (NC) Note: all Series PD /-way solenoid valves are basically in DC. To operate
More information4/3, 4/2 and 3/2 Directional Valve with Wet-pin AC or DC Solenoid
01/08 /3, /2 and 3/2 Directional Valve with Wet-pin AC or DC Solenoid 2.1 Type WE 10...L5X Size (NG) 10 Up to 350 bar Up to 150 L/min Contents Function and configurations -03 Specifications 0 Symbols 05
More informationStand alone 4/3, 4/2 solenoid operated directional valve
Stand alone 4/3, 4/2 solenoid operated directional valve (LF ) FAN DRIVE (LF ) RE 1835-4 Edition: 2.216 Replaces: 7.12 7.212 LF1 Size 6 LF2 Size 1 Series LF1 Maximum operating pressure 31 (45 ) LF2 Maximum
More informationPilot-Operated Directional Control Valves Series D3 - D11
Catalogue HY11-500/UK Characteristics The D31, D41, D81, D91 and D111 are electrical controlled 4/3 or 4/ way directional control valves. The valves are pilot-operated by an NG6 valve. Pressure and flow
More information4/3 and 4/2 Proportional directional valve elements L8580 with flow (EDC-P) sharing control (LUDV concept) PATENT PENDING
/ and / Proportional directional valve elements L88 with flow (EDC-P) sharing control (LUDV concept) PATENT PENDING L88 (EDC-P) RE 181-9 Edition:.16 Replaces: 7.1 7.1 Size 6 Series Maximum operating pressure
More informationPilot Operated Pressure Relief Valve Series R5V (Denison)
Characteristics Pilot operated pressure relief valves series R5V have a similar design to the subplate mounted R4V series. The SAE flanges allow to mount the valves directly on the outlet flanges of pumps
More informationDFE. solenoid control monoblock valve. Content. Working conditions Hydraulic circuit DFE052. Dimensional data Ordering codes...
DFE Content Working conditions... 54 Hydraulic circuit... 55 DFE52 DFE1 DFE2 Dimensional data... 6 Ordering codes... 64 Positioner kits... 67 Solenoid parts... 68 Dimensional data... 69 Ordering codes...
More information4/3 and 4/2 on-off directional valve elements L8511 with flow (EDC-DZ) sharing control (LUDV concept) L8511 (EDC-DZ)
4/3 and 4/2 on-off directional valve elements L8511 with flow (EDC-DZ) sharing control (LUDV concept) L8511 (EDC-DZ) RE 1831-11 Edition: 6.218 Replaces: 7.12 2.216 Size 6 Series Maximum operating pressure
More informationSD3E-B2. Functional Description. 2/2 Way Solenoid Operated Directional Control Valves Poppet Type HA /2012. Replaces HA /2010
/ Way Solenoid Operated Directional Control Valves Poppet Type SD3E-B 7/8-4 UNF p max 40 bar (609 PSI) Q max 75 L/min (9.8 GPM) H 4063 7/0 Replaces H 4063 0/00 / way cartridge valves solenoid operated
More informationPilot Operated Directional Control Valves Series D31DW, D41VW - D111VW
Characteristics The D31, D41, D81, D91 and D111 are electrically controlled 4/3 or 4/ way directional control valves. The valves are pilot operated by an NG6 valve. Pressure and flow of the pilot oil have
More informationSeries PD directly operated solenoid valves
> Series PD solenoid valves CATALOGUE > Release 8.8 Series PD directly operated solenoid valves /-way - Normally Closed (NC) Please note that all Series PD solenoid valves are supplied with direct current
More informationSymbol RH F... GENERAL DESCRIPTION. 4/3- and 4/2- way directional control valves with solenoid operation, heavy duty construction
GENERAL DESCRIPTION List: RH06-1F-1-July 016 4/3- and 4/- way directional control valves with solenoid operation, heavy duty construction Removable AC and DC voltage coils-quick replacement and rotation
More informationDL /118 ED SOLENOID OPERATED DIRECTIONAL CONTROL VALVE COMPACT VERSION SUBPLATE MOUNTING ISO p max 280 bar Q max 50 l/min
41 211/118 ED DL3 SOLENOID OPERATED DIRECTIONAL CONTROL VALVE COMPACT VERSION SUBPLATE MOUNTING ISO 4401-03 p max 280 bar Q max 50 l/min MOUNTING SURFACE OPERATING PRINCIPLE ISO 4401-03-02-0-05 (CETOP
More informationDirectional Control Valve Series 4D01 (DENISON)
Characteristics The Denison series 4D01 is a solenoid operated directional control valve size NG06 in -chamber design. It is direct operated by wet pin solenoids. The 4D01 is available with a Soft Shift
More informationPilot Operated Directional Control Valves Series D31DW, D31NW, D*1VW
Characteristics The pilot operated valves are available in 4 sizes: D31DW NG10 (standard) D31NW NG10 (high flow) D41VW NG16 D81VW NG5 (for port diameter up to 6 mm) D91VW NG5 (for port diameter up to 3
More information4/3-4/2 Proportional directional valves L5080 solenoid (LC04P) operated (for open loop control) L5080 (LC04P)
/ - / Proportional directional valves L solenoid (LCP) operated (for open loop control) L (LCP) RE - Edition:. Replaces: 7. 7. Size Series Maximum operating pressure bar ( psi) Maximum flow l/min (.7 gpm)
More informationp max (see table of performances) Q max (see table of performances) bar Maximum flow rate from port P to A - B - T l/min
41 400/117 ED E*P4 PILOT OPERATED DISTRIBUTOR SOLENOID OR HYDRAULIC (C*P4) CONTROLLED E4P4 CETOP P05 E4R4 ISO 4401-05 E5 ISO 4401-08 p max (see table of performances) Q max (see table of performances)
More information4/3 and 4/2 Proportional directional valve elements L8581 with flow (EDC-P1) sharing control (LUDV concept) PATENT PENDING
4/3 and 4/2 Proportional directional valve elements L881 with flow (EDC-P1) sharing control (LUDV concept) PATENT PENDING L881 (EDC-P1) RE 1831-1 Edition: 6.218 Replaces: 7.12.217 Size 6 Series Maximum
More informationVALVES AND ELECTRONICS
VALVES AND ELECTRONICS Technical Catalogue October 208 web edition VALVES AND ELECTRONICS TECHNICAL CATALOGUE 208 CAP. I CAP. II CAP. III CAP. IV DIRECTIONAL CONTROL PRESSURE CONTROL FLOW CONTROL MODULAR
More informationRPEW4-06. Functional Description HA /2005. Solenoid Operated Directional Control Valves with Wirebox 1/2 NPT 1/2 NPT. Replaces HA /2004
Solenoid Operated Directional Control Valves with Wirebox RPEW4-06 2/2005 Size 06 p max up to 320 bar Q max up to 80 L/min Replaces 2/2004 4/3, 4/2 way directional control valves Four-land spool - reduced
More information3/2 directional spool valve, direct operated with solenoid actuation
/ directional spool valve, direct operated with solenoid actuation RE 86-4/6. Replaces:.9 / Type KKDE (high-performance) Size Component series A Maximum operating pressure 5 bar Maximum flow 6 l/min H68
More informationunrestricted; preferably with coil at bottom (auto. air bleed) 12 or 24 Volt DC from an electronic controller Deutsch plug - IP67
3 Technical data General characteristics Design Flow direction Seals De-energized position Mounting attitude Description, value, unit line mounting P A controlled P R surplus flow discharge (models shown
More informationChapter 2: Directional Control Valves
Contents Chapter : Directional Control Valves Series Description Direct operated Pilot operated Page DIN / ISO 06 10 16 5 3 10 16 5 3 Seat valves, electrically operated D1SE - Spool valves, electrically
More informationSD2E-A3. Functional Description. 3/2 Way Solenoid Operated Directional Control Valves Spool Type HA /2013. Replaces HA /2012
3/2 Way Solenoid Operated Directional Control Valves Spool Type SD2E-A3 3/4-6 UNF p max 350 bar (5076 PSI) Q max 30 L/min (7.9 GPM) HA 404 /203 Replaces HA 404 07/202 Hardened and precision working parts
More informationCartridge Valves Technical Information Directional Valves DCV 03
OVERVIEW DCV 03 directional control valves consist of: housing (1), control spool (5), with two centering springs (4), and cylindrical operating solenoids (2, 3). The three-position directional valves
More information4/3-4/2 Directional valve elements with or without secondary relief valves, and with or without LS connections
4/3-4/2 Directional valve elements with or without secondary relief valves, and with or without LS connections RE 18301-12/07.12 1/10 D8_5 (EDD-XZ) Size 8 Series 00 Maximum pressure (pump side) 310 [4500
More information4/3, 4/2 proportional directional valves solenoid operated (for open loop control)
/, / proportional directional valves solenoid operated (for open loop control) RE -/7. Replaces: RE7/.7 / Type L (LCP) Size Series Maximum operating pressure bar [ psi] Nominal flow rated l/min [.7 gpm]
More information4/2 Directional valve elements with or without secondary relief valves, with or without LS connections, and with 2/2 solenoid cartridge valve
4/2 Directional valve elements with or without secondary relief valves, with or without LS connections, and with 2/2 solenoid cartridge valve RE 183-54/7.12 Replaces: 1.9 1/8 8_58 (EDZ-VEI) Size 4 Series
More information4/3 and 4/2 on-off directional valve elements D8_5 with or (EDD-XZ) without secondary relief valves and with or without LS connections D8_5 (EDD-XZ)
4/3 and 4/2 on-off directional valve elements D8_5 with or (EDD-XZ) without secondary relief valves and with or without LS connections D8_5 (EDD-XZ) RE 18301-12 Edition: 02.2016 Replaces: 07.12 07.2012
More informationProportional pressure relief valve, directly operated, rising characteristic curve
Proportional pressure relief valve, directly operated, rising characteristic curve RE 1139-0/09.07 Replaces: 0.05 1/1 Type KBPS.A (High-Performance) Component series A Maximum operating pressure 0 bar
More information3/2 Way Valve G1/8. Data Sheet No E. Characteristics Symbol Unit Description General Features Spool valve.
AP64E00DX00X Characteristics to VDI 90 Pressures quoted as gauge pressure Characteristics Symbol Unit Description General Features Spool valve Mounting screws M Tube connection Thread Port size ; 7.4 deep
More information2/2 directional seat valve, direct operated with solenoid actuation
/ directional seat valve, direct operated with solenoid actuation RE 836-/0. Replaces: 06.08 /0 Type KSDE (High Performance) Component size 8 Component series B Maximum operating pressure 500 bar Maximum
More informationExamples 3/2-way valve A T NO: Symbol
1/1 Hauhinco-3_2-way valve_b1_dn3-25_pn320_pn500_x,y-intern water s 01/2016 3/2-way valve B1 X,Y - DN3 DN25 PN320, PN500 Features: Hydraulically actuated directional seat valve controlling liquid media.
More informationELECTRIC COMPONENTS HYDRAULIC COMPONENTS
ELECTRIC COMPONENTS HYDRAULIC COMPONENTS T E C H N I C A L C A T A L O G CONTENT Hydraulic components - Electric and electronic components ELECTRIC AND ELECTRONIC COMPONENTS PRESSURE SWITCHES 5 Pressure
More informationDirectional Control Valve Series D3W (Parker), 4D02 (Denison)
Characteristics Series D3W (Parker), 4D0 (Denison) The direct operated directional control valve size NG10 is available with both Parker (series D3W) and Denison (series 4D0) model codes. Both series are
More information5-Way heavy duty flow control, with pressure compensated and solenoid controlled priority flow, for two pumps systems
5-Way heavy duty flow control, with pressure compensated and solenoid controlled priority flow, for two pumps systems RE 18309-54/04.10 1/6 Replaces: RE 00171/02.07 A-VRFC3C-VEI-VS 0M.43.12.80 - Y - Z
More informationAxial piston pumps type PVPC variable displacement, by a full line of mechanical controls
www.atos.com Table A600/E Axial piston pumps type PVPC variable displacement, by a full line of mechanical controls PVPCCH4046 PVPC are variable displacement axial piston pumps for high pressure operation,
More informationDFE10. solenoid control monoblock valve. Ordering codes. Description example : Diverter valve DFE10/3 A 18 ES - W VDC - SAE - <CVN>
DFE1 Ordering codes Description example : Diverter valve DFE1/3 18 ES - W 22-12VDC - SE - 1. 4. 5. 3. 5. 2. Valve is supplied painted as standard, with one coat of rimer black antirust paint II 5.
More informationTechnical Data Sheet
Technical Data Sheet Type 52 2/2-way solenoid valve NC - Valve normally closed (as standard) NO - Valve normally open (as option) Direct operated piston design valve. No differential pressure is necessary
More informationDSE /117 ED DIRECTIONAL VALVE WITH PROPORTIONAL CONTROL SERIES 11 SUBPLATE MOUNTING ISO p max 350 bar Q max 40 l/min
83 2/117 ED DSE3 DIRECTIONAL VALVE WITH PROPORTIONAL CONTROL SUBPLATE MOUNTING ISO 41-3 p max 3 bar Q max l/min MOUNTING SURFACE OPERATING PRINCIPLE ISO 41-3-2-- (CETOP 4.2-4-3-3). 33 3.2 21. 12.7.1.7
More informationDirectional Control Valve
Characteristics The NG6 directional control valve series D1VW provides high functional limits up to 8 l/min in combination with a very low, energy-saving pressure drop. wide variety of spool options allows
More informationDirectional Control Valve Series D1VW
Characteristics The NG6 directional control valve series D1VW provides high functional limits up to 8 l/min in combination with a very low, energy-saving pressure drop. A wide variety of spool options
More informationWalvoil 2/2, 3/2, 6/2, 8/3 Wegeventile, elektromagnetisch Gruppe mehr als Qualität
2/2, 3/2, 6/2, 8/3 Wegeventile, elektromagnetisch mehr als Qualität DFE Contents Working conditions 48 Hydraulic circuit 49 DFE52 DFE1 DFE2 Dimensional data 53 Ordering codes 56 Positioner kits 59 Solenoid
More information2/2 CARTRIDGE VALVES LOGIC ELEMENTS
2/2 LOGIC ELEMENTS AND COVERS KEL.16/2... CH. V PAGE 3 NG16 / NG2 KEL SEATS CH. V PAGE 4 KEC.16/2... CH. V PAGE KEC HYDRAULIC MOUNTING DIAGR. CH. V PAGE 6 KEC.16/2... WITH CMP CH. V PAGE 10 C.*.P.16/2...
More informationDifferential Lock Valve
Differential Lock Valve Series M..DVD (for 3 motors) robust and reliable energy-optimised over the whole flow range simple control compact design offers space-saving installation reliable, uniform motion
More informationSpecial Directional Valves RE 00169/ The Drive & Control Company
Special Directional Valves RE 00169/01.06 The Drive & Control Company Oleodinamica LC s.r.l. Compact Directional Valves The Drive & Control Company Product Program Programma Prodotti - Flow Diverters -
More informationp max 350 bar Q max 50 l/min bar bar 50 Ports dimensions: P - port (pressure) T - port (drainage) T - port (drainage) A/B - port l/min
52 000/103 ED This series of modular subplates has been designed to make hydraulic circuits and can be used directly on power packs or on any other section of the machine. The subplates are assembled by
More informationSeries P directly operated solenoid valves
> Series P solenoid valves CATALOGUE > Release 8.7 Series P directly operated solenoid valves 3/-way NC and NO. The solenoid valves can be mounted on a single base (with M5 ports) as well as on manifolds
More informationSeated valve bidirectional Type WVM-4B-Bi
Seated valve bidirectional Type WVM-4B-Bi Features Bidirectional (flow of fluid in both directions, independently of pressure prof) Low pressure drop Direct operated Leakage free Good resistance to corrosion
More informationDIRECTIONAL CONTROL VALVES CETOP3
DIRECTIONAL CONTROL VALVES CETOP3 GENERAL DESCRIPTION RH0...1-...F... Document: DCVC3-1-Aug 2013 4/3- and 4/2- way directional control valves with solenoid operation, heavy duty construction RH0...1-...F...
More informationProportional Flow-Control Cartridges, Size 5
Proportional Flow-Control Cartridges, Size Q max = l/min, p max = bar, Q N = l/min at p bar Leak free, load compensated, two stage Description Series MVRPLSA two-stage proportional flow-control cartridges
More informationRNEH4-25. Functional Description HA / /2 and 4/3 Way Directional Control Valves Pilot Operated. Replaces HA /2012
4/2 and 4/3 Way Directional Control Valves Pilot Operated RNEH4-25 HA 4024 7/2015 Size 25 (D 08) 320 bar (4600 PSI) 600 L/min (159 GPM) Replaces HA 4024 6/2012 Solenoid pilot operated directional valves
More informationElectrically Operated Pressure Relief Cartridge, Size 1 Seated Design, Direct Acting Series WUVA 1LO...
Electrically Operated Pressure Relief Cartridge, Size Seated Design, Direct Acting Series WUVA LO....5 l/min, 40 bar Wet armature solenoid with high pressure core tube and slip on coil Coils can be changed
More informationServo-operated 2/2-way solenoid valves Type EV220A
Data sheet Servo-operated 2/2-way solenoid valves Type is a compact servo-operated 2/2-way solenoid valve program, especially designed for use in machines and equipment with limited space. Features and
More informationProportional Pressure Relief Valve Series RE*T
Characteristics The pressure relief valve series RE*T have a proportional solenoid operated pilot stage with integrated electronics and a cartridge main stage. Features Pilot-operated pressure relief valve
More informationDIRECTIONAL CONTROL VALVES CETOP3
DIRECTIONAL CONTROL VALVES CETOP3 CONTENTS: RH06...1 - electrical control... RH06...2 - hydraulic control... Page 1/17...7/17 8/17...9/17 RH06...4 - mechanical control RH06...6 - pneumatic control......
More informationVALVES AND ELECTRONICS. Technical Catalogue
VALVES AND ELECTRONICS Technical Catalogue May 206 The company Brevini Fluid Power, part of the Brevini group, was established in 2003 in Reggio Emilia where it has its head office. Brevini Fluid Power
More informationFlow Control Valve. 1 Description. 2 Symbols. Series SRCA General. 1.2 Application examples way flow control way flow control
Flow Control Valve Series SRC.. plug-in coil for easy coil change flow rates are unaffected by changes in temperature or load compact design reduced p ZnNi coating (>70h DIN EN ISO 97 NSS) Description.
More informationDirectional Seat Valve Series D4S (Denison)
Characteristics Seat valves series D4S are designed for directional control functions. A large variety of poppets, springs and covers - including shuttle valves, stroke limiters, solenoid valves (VV01)
More information2/2 or 3/2 way direct acting rocker solenoid valve
2/2 or 3/2 way direct acting rocker solenoid valve With isolating diaphragm Ultra low dead volume Type 6126 can be combined with... High back-pressure tightness Normally closed, normally open or universal
More informationSeated valves. Type WV700 NG 6 ISO up to 25 l/min, up to 700 bar. Features. Applications. Design. Technical data
Seated valves Type WV700 Features Direct operated Leakage free (double tight) High operational safety and reliable switching High duty cycles and long lifetime Applications Control of cylinders and motors
More information