RCM. Direct Reading Flowmeter. for Liquids or Gases
|
|
|
- Blaise Hunter
- 5 years ago
- Views:
Transcription
1 Direct Reading Flowmeter for Liquids or Gases measuring monitoring analyzing RCM Compact Design Easy to Install Horizontal or Vertical Installation Flow Rates up to 3000 GPM (Liquid) or SCFM (Gas) Low Pressure Drop Optional Alarms and Output Signals 01-08/2016 KOBOLD companies worldwide: ARGENTINA, AUSTRALIA, AUSTRIA, BELGIUM, BULGARIA, CANADA, CHILE, CHINA, COLOMBIA, CZECH REPUBLIC, EGYPT, FRANCE, GERMANY, HUNGARY, INDIA, INDONESIA, ITALY, MALAYSIA, MEXICO, NETHERLANDS, PERU, POLAND, REPUBLIC OF KOREA, ROMANIA, SINGAPORE, SPAIN, SWITZERLAND, TAIWAN, THAILAND, TUNISIA, TURKEY, UNITED KINGDOM, USA, VIETNAM KOBOLD Instruments, Inc Parkway View Drive Pittsburgh, PA Main Office:
2 Description KOBOLD model RCM is a differential pressure direct reading flowmeter, suitable for liquids or gases with low to medium viscosity, low solid content, and compatible with all materials of construction. The RCM is ideal for industrial applications where durability and reliability are important considerations. It is compact, accurate, economical, needs minimal maintenance, and is resistant to damage. In liquid applications of 6 GPM and higher, pulsations snubbers are incorporated into the connecting pressure passages to produce smooth operation in the presence of turbulence. Pressure Drop vs. Flow Rate Technical Details Accuracy: Rangeability: 6:1 Flow Media: Media Temp. Range: ± 3% of Full Scale Liquids or Gases Ambient Temp. Range: F Maximum Pressure: Housing Materials: Body Materials: Bellow Materials: Seal Materials: Bellows Cap Material: Lens Material: Relay Options: Output Options: RCM Piping Requirements F (Standard, and with Electrical Options) F (High Temp. Options with Order Suffix "T" or "K" Only) 180 PSIG (Standard) 400 PSIG (Optional) UV Stabilized ABS Standard Option F or F2: Aluminum Option RW3: Fiberglass Reinforced Polyamide Bronze, Monel, or 316 SS Option ES; PTFE also Wetted Bronze, Monel, 316 SS, or Inconel NBR, FKM, EPR, PTFE PPS for Low Pressure Units Same as Body Material for High Pressure and/or High Temperature Versions Polycarbonate, Option F2: Safety Glass High/Low Alarms 4-20 ma, Hz Frequency A minimum of 10 PSIG back pressure is required for all RCM models. Upstream piping should have a straight run of at least 10 pipe diameters at the meter inlet connection. If valves are required, they should be installed downstream of the flowmeter. Gas flow models 6000 and 9000 are inlet pressure sensitive and must be regulated to a constant user-selected value at the inlet. Percent of Rated Flow Output Specifications Electrical Rating: General Purpose Power Requirements: 24 VDC ± 10%, 50 ma Max. Accuracy with Outputs: ± 3% of Full Scale for Horizontal Flow ± 5% of Full Scale for Vertical Flow Option -..W (Analog Output): 4-20 ma, 4-wire, Proportional to Flow Load: 800 Ohms Max. Zero: 15% of Full Scale Span: % of Full Scale Flow Option -..W2/W3 (Analog Output): 4-20 ma, Proportional to Diff. Pressure Load: 250 Ohms Max. Span: % of Full Scale Orifice ΔP Option -..X (Alarm Relays): 2 N/O Limit Relays AC Contact Rating: VAC VAC VAC DC Contact Rating: VDC VDC VDC Option -..Y (Frequency Output): Frequency Signal, Hz, 5 V Peak Zero: 15% of Full Scale Span: % of Full Scale Flow Option -..RW3 (Digital Rate/Total Display) Display: Dual Line 7 and 11 Digit Backlit LCD Rate and Total 4-20 ma, 2-wire, Proportional to ΔP Pulse, NPN, Max. Flow Protection: IP67/NEMA 4X 2
3 Order Details: Threaded Flowmeters for Liquids Standard Range (GPM) Fittings (NPT) Bronze Product Material Monel Stainless Steel Low Flow (GPH) Add Suffix..ES /4" RCM-7101 RCM-7201 RCM /2" RCM-7102 RCM-7202 RCM /4" RCM-7103 RCM-7203 RCM /2" RCM-7104 RCM-7204 RCM /4" RCM-7105 RCM-7205 RCM /2" RCM-7106 RCM-7206 RCM /2" RCM-7107 RCM-7207 RCM /4" RCM-7108 RCM-7208 RCM /2" RCM-7109 RCM-7209 RCM /4" RCM-7110 RCM-7210 RCM /2" RCM-7111 RCM-7211 RCM /2" RCM-7112 RCM-7212 RCM /2" RCM-7113 RCM-7213 RCM /2" RCM-7114 RCM-7214 RCM /4" RCM-7115 RCM-7215 RCM " RCM-7116 RCM-7216 RCM /4" RCM-7117 RCM-7217 RCM " RCM-7118 RCM-7218 RCM " RCM-7119 RCM-7219 RCM /2" RCM-7120 RCM-7220 RCM " RCM-7121 RCM-7221 RCM /2" RCM-7122 RCM-7222 RCM " RCM-7123 RCM-7223 RCM /2" RCM-7124 RCM-7224 RCM " RCM-7125 RCM-7225 RCM /2" RCM-7126 RCM-7226 RCM " RCM-7127 RCM-7227 RCM " RCM-7128 RCM-7228 RCM " RCM-7129 RCM-7229 RCM " RCM-7130 RCM-7230 RCM " RCM-7131 RCM-7231 RCM " RCM-7132 RCM-7232 RCM " RCM-7133 RCM-7233 RCM Options Please Refer to Options Table on Page 6 Please note: A minimum of 10 PSI inlet pressure is required for operation of all RCM models. For liquid applications, please specify the following with your order: operating/maximum inlet pressure, operating/maximum temperature, and type of liquid; if not water, please specify the specific gravity or density and the viscosity 3
4 Order Details: Threaded Flowmeters for Gas Standard Range (SCFM) Fittings (NPT) Bronze Product Material Monel Stainless Steel Low Flow (SCFH) Add Suffix..ES /4" RCM-9101 RCM-9201 RCM /2" RCM-9102 RCM-9202 RCM /4" RCM-9103 RCM-9203 RCM /2" RCM-9104 RCM-9204 RCM /4" RCM-9105 RCM-9205 RCM /2" RCM-9106 RCM-9206 RCM /2" RCM-9107 RCM-9207 RCM /2" RCM-9109 RCM-9209 RCM /4" RCM-9110 RCM-9210 RCM /2" RCM-9111 RCM-9211 RCM /2" RCM-9112 RCM-9212 RCM /4" RCM-9113 RCM-9213 RCM /4" RCM-9115 RCM-9215 RCM " RCM-9116 RCM-9216 RCM /4" RCM-9117 RCM-9217 RCM " RCM-9118 RCM-9218 RCM " RCM-9120 RCM-9220 RCM /2" RCM-9121 RCM-9221 RCM " RCM-9122 RCM-9222 RCM /2" RCM-9123 RCM-9223 RCM " RCM-9124 RCM-9224 RCM /2" RCM-9125 RCM-9225 RCM " RCM-9126 RCM-9226 RCM /2" RCM-9127 RCM-9227 RCM " RCM-9128 RCM-9228 RCM " RCM-9129 RCM-9229 RCM " RCM-9130 RCM-9230 RCM " RCM-9131 RCM-9231 RCM " RCM-9132 RCM-9232 RCM " RCM-9133 RCM-9233 RCM Options Please Refer to Options Table on Page 6 Please note: A minimum of 10 PSI inlet pressure is required for operation of all RCM models. For gas applications, please specify the following with your order: operating/maximum inlet pressure, operating/maximum temperature, and type of gas; if not air, please specify the specific gravity or density 4
5 Order Details: Wafer Style Flowmeters for Liquids Range (GPM) Fittings (Flange Size) Bronze Product Material Monel Stainless Steel Extended Flange Add Suffix /2" RCM-5102 RCM-5202 RCM /2" RCM-5104 RCM-5204 RCM /2" RCM-5106 RCM-5206 RCM /2" RCM-5107 RCM-5207 RCM /4" RCM-5108 RCM-5208 RCM /2" RCM-5109 RCM-5209 RCM /4" RCM-5110 RCM-5210 RCM /4" RCM-5115 RCM-5215 RCM " RCM-5116 RCM-5216 RCM /4" RCM-5117 RCM-5217 RCM " RCM-5118 RCM-5218 RCM /2" RCM-5120 RCM-5220 RCM " RCM-5121 RCM-5221 RCM /2" RCM-5122 RCM-5222 RCM " RCM-5123 RCM-5223 RCM /2" RCM-5124 RCM-5224 RCM " RCM-5125 RCM-5225 RCM EF1 (2½") /2" RCM-5126 RCM-5226 RCM " RCM-5127 RCM-5227 RCM EF1 (2½") " RCM-5128 RCM-5228 RCM EF1 (2½") " RCM-5129 RCM-5229 RCM EF1 (2½") " RCM-5130 RCM-5230 RCM " RCM-5131 RCM-5231 RCM " RCM-5132 RCM-5232 RCM " RCM-5133 RCM-5233 RCM " RCM RCM EF2 (5") " RCM RCM EF2 (5") " RCM RCM EF2 (5") " RCM RCM " RCM RCM " RCM RCM EF2 (5") " RCM RCM " RCM RCM " RCM RCM " RCM RCM " RCM RCM " RCM RCM Options Please Refer to Options Table on Page 6 Please note: A minimum of 10 PSI inlet pressure is required for operation of all RCM models. KOBOLD RCM-5000 series flowmeters are designed for wafer style mounting between two adjoining flanges. The meter will fit between all standard 150 lb or 300 lb ANSI flanges, DIN PN 10 or DIN PN 16 flanges, JIS flanges, and AS flanges. Installation requires flanges, flat gaskets, and flange bolts provided by the user. For liquid applications, please specify the following with your order: operating/maximum inlet pressure, operating/maximum temperature, and type of liquid; if not water, please specify the specific gravity or density and the viscosity 5
6 Order Details: Wafer Style Flowmeters for Gas Range (SCFM) Fittings (Flange Size) Bronze Product Material Monel Stainless Steel Extended Flange Add Suffix /2" RCM-6102 RCM-6202 RCM /2" RCM-6106 RCM-6206 RCM /2" RCM-6107 RCM-6207 RCM /2" RCM-6109 RCM-6209 RCM /4" RCM-6110 RCM-6210 RCM /4" RCM-6113 RCM-6213 RCM /4" RCM-6115 RCM-6215 RCM " RCM-6116 RCM-6216 RCM /4" RCM-6117 RCM-6217 RCM " RCM-6118 RCM-6218 RCM " RCM-6120 RCM-6220 RCM /2" RCM-6121 RCM-6221 RCM " RCM-6122 RCM-6222 RCM /2" RCM-6123 RCM-6223 RCM " RCM-6124 RCM-6224 RCM /2" RCM-6125 RCM-6225 RCM " RCM-6126 RCM-6226 RCM EF1 (2½") /2" RCM-6127 RCM-6227 RCM " RCM-6128 RCM-6228 RCM EF1 (2½") " RCM-6129 RCM-6229 RCM EF1 (2½") " RCM-6130 RCM-6230 RCM " RCM-6161 RCM-6261 RCM EF1 (2½") " RCM RCM EF2 (5") " RCM-6131 RCM-6231 RCM " RCM-6132 RCM-6232 RCM " RCM RCM EF2 (5") " RCM RCM " RCM-6133 RCM-6233 RCM " RCM RCM EF2 (5") " RCM RCM " RCM RCM " RCM RCM EF2 (5") " RCM RCM " RCM RCM " RCM RCM " RCM RCM " RCM RCM Options Please Refer to Options Table on Page 6 Please note: A minimum of 10 PSI inlet pressure is required for operation of all RCM models. KOBOLD RCM-6000 series flowmeters are designed for wafer style mounting between two adjoining flanges. The meter will fit between all standard 150 lb or 300 lb ANSI flanges, DIN PN 10 or DIN PN 16 flanges, JIS flanges, and AS flanges. Installation requires flanges, flat gaskets, and flange bolts provided by the user. For gas applications, please specify the following with your order: operating/maximum inlet pressure, operating/maximum temperature, and type of gas; if not air, please specify the specific gravity or density 6
7 Order Details: Options Option Description Exclusions..1S2 Single SPDT Reed Switch, 3 W Max, Effective 30-90% of Full Scale (120 F Max Ambient) K, N, RW3, W, W2, W3, X, Y, Z..2S2 Dual SPDT Reed Switches, 3 W Max, Effective 30-90% of Full Scale (120 F Max Ambient) K, N, RW3, W, W2, W3, X, Y, Z..A FKM Elastomer Seals -..B3 EPR Elastomer Seals -..B5 PTFE Elastomer Seals -..C Calibrations for Liquid Specific Gravity (SG < 0.95 or SG >1.05) -..D Gasketed Meter Case, Mechanical Meters Only, NEMA 4X Any Electronic Output Option..D2 Gasketed Case with 1/2" Condulet Box, NEMA 4X RW3..E Special Orifice Sizing for Non-Standard Flow Rates -..EF1 Extended Flange Size, 2½" -..EF2 Extended Flange Size, 5" -..EM European Labeling with CE Mark -..ES Low Flow Option (See available ranges on pages 3 and 4) -..F Aluminum Case, Plastic Crystal -..F2 Aluminum Case, Glass Crystal -..G Custom Scale -..H 400 PSIG Service Rating -..J Peak Flow Indicator -..K Steam Service. Scaled in lbs/hr (120 PSIG Max, 350 F Service Rating) 1S2, 2S2, N, T, RW3, W, W2, W3, X, Y, Z..M Metric Scale (LPM for Liquids - Nm³/h for Gases) (Consult Factory for Exact Range Values) -..N Ammonia Service (Available for Stainless Steel Models Only) 1S2, 2S2, K, T, RW3, W, W2, W3, X, Y, Z..O2 Oxygen Cleaning per ASTM G93-88 (Requires Option "..A" - FKM Seals) -..P Panel Mounting Kit (Available for 1½" and Smaller Meters Only) -..RW3 LCD Rate and Total Display with 4-20 ma, ΔP Transmitter, Replaces Analog Dial 1S2, 2S2, K, N, T..R2 Remote Mechanical Indicator, includes equalizing valve, Bronze -..R3 Remote Mechanical Indicator, includes equalizing valve, SS -..T 350 F Service Rating, Includes FKM Seals 1S2, 2S2, K, N, T, RW3, W, W2, W3, X, Y, Z..V Calibration for High Viscosity Liquid (5 cps < viscosity < 500 cps) -..W 4-20 ma, 4-Wire Flow Rate Transmitter, 24 VDC Input Power w/mechanical Indicator 1S2, 2S2, D, K, N, T..W ma ΔP Transmitter with Mechanical Indicator (Max ΔP of 58 PSI) 1S2, 2S2, D, K, N, T..W ma ΔP Transmitter without Indicator 1S2, 2S2, D, K, N, T..X Two N/O Relays, 1 Min/1 Max, Red/Green LED Indicators, 24 VDC 1S2, 2S2, D, K, N, T..Y Hz Frequency Output to Drive Pulse Triggered Controllers, 24 VDC 1S2, 2S2, D, K, N, T..Z Options W, X, and Y Combined (100 ma Combined Current Draw) 1S2, 2S2, D, K, N, T Accessory RCM-PKIT1 Remote Mounting Kit, Brass (Fittings Only, User Supplies 1/4" O.D. Tubing RCM-PKIT2 Remote Mounting Kit, Stainless Steel (Fittings Only, User Supplies 1/4" O.D. Tubing Order Details: Additional Information R L VUR VDR VUL VDL Available Flow Configurations Horizontal, Flow to the Right Horizontal, Flow to the Left Vertical, Flow Up, Dial on the Right Vertical, Flow Down, Dial on the Right Vertical, Flow Up, Dial on the Left Vertical, Flow Down, Dial on the Left *Please remember to specify the flow direction listed above with your order along with the media and process conditions 7
8 5.08" 2.25" 3.04" Body Size (IPS) Nominal Dimensions: Threaded Flowmeters Dimensions: Analog Dial A B C D Weight (lbs) 1/4" 5.2" 3.1" 1.5" Br/1.1" SS 1.25" Hex/1.1" Rnd SS 3.5 1/2" 5.2" 3.1" 1.5" Br/1.1" SS 1.25" Hex/1.1" Rnd SS 3.5 3/4" 5.6" 3.1" Br/2.7" SS 1.5" 1.25" Hex/1.5" Rnd SS 3.6 1" 6.1" 3.1" Br/2.8" SS 1.75" 1.5" Hex/1.75" Rnd SS /2" 6.4" 3.1" Br/3.3" SS 2.5" Br/2.4" SS 2.12" Hex/2.4" Rnd SS 4.5 2" 6.8" 3.2" Br/3.3" SS 3.2" Br/3.0" SS 2.75" Hex/3.0" Rnd SS 6.1 3" 7.5" 4.2" Br/4.4" SS 4.6" 4.0" Hex/4" Rnd SS 13.0 Body Size (IPS) Dimensions: Digital Display Option RW3 A B C D Weight (lbs) 1/4" 6.6" Br/5.8" SS 3.1" 1.5" Br/1.1" SS 1.25" Hex/1.1" Rnd SS 3.5 1/2" 6.6" Br/5.8" SS 3.1" 1.5" Br/1.1" SS 1.25" Hex/1.1" Rnd SS 3.5 3/4" 6.5" 3.1" Br/2.7" SS 1.5" 1.25" Hex/1.5" Rnd SS 3.6 1" 6.6" 3.1" Br/2.8" SS 1.75" 1.5" Hex/1.75" Rnd SS /2" 7.0" 3.1" Br/3.3" SS 2.5" Br/2.4" SS 2.12" Hex/2.4" Rnd SS 4.5 2" 7.4" 3.2" Br/3.3" SS 3.2" Br/3.0" SS 2.75" Hex/3.0" Rnd SS 6.1 3" 8.1" 4.2" Br/4.4" SS 4.6" 4.0" Hex /4" Rnd SS 13.0 Nominal Dimensions: Wafer Style Flowmeters 5.08" 3.04" Size Dimensions: Analog Dial A B Weight (lbs) 1/2" 6.62" 1.69" Br/1.62" SS 4.0 3/4" 7.06" 2.00" 5.0 1" 7.25" 2.38" /2" 7.81" 3.12" Br/3.0" SS 6.0 2" 8.00" 3.75" 7.0 3" 8.87" 5.00" 9.0 4" 9.95" 6.13" Br/6.0" SS " 11.05" 8.38" Br/8.0" SS " 12.30" 10.38" Br/10.0" SS 24.0 Size Dimensions: Digital Display Option RW3 A B Weight (lbs) 1/2" 7.23" 1.69" Br/1.62" SS 4.0 3/4" 7.67" 2.00" 5.0 1" 7.86" 2.38" /2" 8.42" 3.12" Br/3.0" SS 6.0 2" 8.61" 3.75" 7.0 3" 9.48" 5.00" 9.0 4" 10.56" 6.13" Br/6.0" SS " 11.66" 8.38" Br/8.0" SS " 12.91" 10.38" Br/10.0" SS "-1.19"
RCM - Direct Reading Flowmeters
Compact Design Easy to Install Horizontal or Vertical Installation Flow Rates up to 3000 GPM (Liquid) or 20000 SCFM (Gas) Low Pressure Drop Optional Alarms and Output Signals Accuracy: ± 3% of full scale
SM Series. High Pressure - All-Metal Flowmeter and Switch
High Pressure - All-Metal Flowmeter and Switch measuring monitoring analyzing SM Series Accuracy: ± 5% Full Scale Max. Pressure: 3600 / 5000 PSI or Versions Direct Reading Scales for Water or Air Small,
TUR. Turbine Wheel Flowmeter. Plastic Model for Liquids. Measuring Ranges: GPM or GPM (Water)
Turbine Wheel Flowmeter Plastic Model for Liquids measuring monitoring analyzing TUR TUR with Transmitter TUR with ADI-1 Measuring Ranges: 5.3...88 GPM or 11...440 GPM (Water) Measuring Accuracy: ± 1%
NCP/NCB/NCS. Magnetic Float Switches. for Liquids
Magnetic Float Switches for Liquids measuring monitoring analyzing NCP/NCB/NCS Available Materials: Brass, SS, NBR, Polypropylene, and PVC Maximum Pressure: 400 PSIG Maximum Temperature: 300 F Single Point
DVH. Vortex Flowmeter. Measuring range: Nm³/h. Accuracy: ± 0,7% of reading (liquids) ± 1% of reading (gases and steam) p max
Vortex Flowmeter measuring monitoring analysing DVH Measuring range: 3-8... 3057-280187 Nm³/h Accuracy: ± 0,7% of reading (liquids) ± 1% of reading (gases and steam) p max : 100 bar abs; t max : 400 C
Vortex Flow Meter Model DVH
Vortex Flow Meter measuring monitoring analysing DVH Measuring range: 3-8... 3057-280187 Nm³/h Accuracy: ± 0,7 % of reading (liquids) ± 1 % of reading (gases and steam) p max : 100 bar abs; t max : 400
EPS / UMF2. Magnetic Inductive Flowmeter for Conductive Liquids
Magnetic Inductive Flowmeter for Conductive Liquids measuring monitoring analyzing EPS / UMF2 High Accuracy: 0.3 % of Actual Flow Maintenance-free No Pressure Drop Wide Variety of Lining and Electrode
TUR. Turbine Wheel Flowmeter. plastic version for liquids. Measuring ranges: ,0 m 3 /h water. ± 1% of full scale
Turbine Wheel Flowmeter plastic version for liquids measuring monitoring analysing TUR Model: TUR with transmitter Measuring ranges: 0.2-5.0... 2.5-100,0 m 3 /h water Model: TUR with ADI electronics OMeasuring
Model: TUR with transmitter. Output: pulses, 0-20 ma, 4-20 ma or 0-10 V, LED display, pointer indication, switching output
Turbine Wheel Flow Meter plastic version for liquids measuring monitoring analysing Model: TUR with transmitter TUR Model: TUR with pointer indication Measuring ranges: 0.2-5.0... 2.5-100,0 m 3 /h water
Vortex Flowmeter Model DVE
Vortex Flowmeter Multi-Parameter measuring monitoring analysing DVE Measuring range Liquids: 5.2-157... 284-85371 m³/h Air: 89-1463... 26915-2467081 Nm 3 /h (20 C, 0 bar rel) Saturated steam: 81-938...
DW PADDLE-BELLOWS FLOWMETER & SWITCH
DW PADDLE-BELLOWS FLOWMETER & SWITCH Flow Pressure Level Temperature measurement monitoring control S3 Accuracy: ±3% Full Scale Excellent for Highly Contaminated Media Orientation Independent Brass or
DW PADDLE-BELLOWS FLOWMETER & SWITCH
DW PADDLE-BELLOWS FLOWMETER & SWITCH Flow Pressure Level Temperature measurement monitoring control S3 Accuracy: ±3% Full Scale Excellent for Highly Contaminated Media Orientation Independent Brass or
NGS. Dual-Magnet Float Switch. Pressure: up to 25 bar. Density: > 0.7 kg/dm 3. High switch capacity. Material: stainless steel 1.
Dual-Magnet Float Switch measuring monitoring analysing NGS Pressure: up to 5 bar O O Medium temperature: up to 50 C Density: > 0.7 kg/dm 3 High switch capacity O O Connection: square flange, DIN flange,
KEL. Heavy Duty Differential Pressure Flowmeters
Heavy Duty Differential Pressure Flowmeters measuring monitoring analyzing KEL Rugged Metal Construction Flow Rates up to 2000 GPM Linear Scales For Horizontal or Vertical s Threaded or Wafer Style s Able
DW PADDLE-BELLOWS FLOWMETER & SWITCH
DW PADDLE-BELLOWS FLOWMETER & SWITCH Flow Pressure Level Temperature measurement monitoring control Accuracy: ±% Full Scale Excellent for Highly Contaminated Media Orientation Independent Brass or Stainless
MMA. Insertion Resistance Thermometers. with, or without transmitter. OEconomically-priced O thermometers with optional plug-on display
Insertion Resistance Thermometers with, or without measuring monitoring analysing MMA OEconomically-priced O digital thermometers with optional plug-on display O O Compact construction with or without
Flow. Oval Wheel Flowmeter Model DOE
Oval Wheel FIowmeter for low and high viscous liquids measuring monitoring analysing DOE Measuring range: 0.5 36 l/h und 1 40 l/min Viscosity range: 1 1000 cp Accuracy: ±1% of reading Material: stainless
DOM. Positive Displacement Flowmeter
Positive Displacement Flowmeter measuring monitoring analyzing DOM Threaded, Flanged, and High Pressure Series Aluminum or Stainless Steel Bodies Measures Liquids with Viscosities to 1,000 cps (Higher
KEL DIFFERENTIAL PRESSURE FLOWMETERS
KEL DIFFERENTIAL PRESSURE FLOWMETERS Flow Pressure Level Temperature measurement monitoring control Rugged Metal Construction Flow Rate to 2000 GPM Linear Scale For Horizontal or Vertical Pipes Threaded
Paddle Flow Monitor Model PSR/PSE
Paddle Flow Monitor for liquids measuring monitoring analysing PSR/PSE Switching ranges: 2.5-4.8... 383-533 p max : 250 bar, t max : 110 C Connection: G ¼... G 1 ½, ¼" NPT... 1 ½" NPT S3 : or stainless
TWL-Exia. Resistance Thermometers according to DIN. Ignition Protection Exia. Pt 100-sensor class A respectively class B
Resistance Thermometers according to DIN Ignition Protection Exia measuring monitoring analysing TWL-Exia O O Measuring range: -...+600 C OO Pt 100-sensor class A respectively class B OO Output: resistance
KDM ARMORED FLOW METER & SWITCH
KDM ARMORED FLOW METER & SWITCH Flow Pressure Level Temperature measurement monitoring control S2 Short Installation Length SS, PTFE or Hastelloy Wetted Parts Analog Output Available 110 F to + 390 F Temperature
DOR. Insertion Paddle Wheel Flowmeter/Monitor. for low viscous liquids. Flow range: ,300 l/s to ,000 l/s. Flow velocity range: 0.
Insertion Paddle Wheel Flowmeter/Monitor for low viscous liquids measuring monitoring analysing DOR Flow range: 0.25 6,300 l/s to 0.4 49,000 l/s Flow velocity range: 0.3-10 m/s Viscosity range: low viscous
DOR. Insertion Paddle Wheel Flow Meter/Monitor. for Low Viscous Liquids. Flow range: l/s to l/s. Flow velocity range: 0.
Insertion Paddle Wheel Flow Meter/Monitor for Low Viscous Liquids measuring monitoring analysing DOR Flow range: 0.25 6300 l/s to 0.4 49000 l/s Flow velocity range: 0.3-10 m/s Viscosity range: low viscous
DPT TARGET TYPE FLOWMETERS
DPT TARGET TYPE FLOWMETERS Flow Pressure Level Temperature measurement monitoring control S3 Patented Target/Leaf-Spring Design Minimal Wear Components 1.5-8 to 225-500 GPM Water Line Sizes 3/8 to 3" Wide
MAN-P. Diaphragm Pressure Gauges. according to EN for Stringent Demands
Diaphragm Pressure Gauges according to EN 837-3 for Stringent Demands measuring monitoring analysing MAN-P Housing: mm, 160 mm Connection: G ½, open measuring flange DIN/ANSI Material: stainless steel
Accessories for Pressure Gauges
Accessories for Pressure Gauges measuring monitoring analysing KOBOLD companies worldwide: ALGERIA, ARGENTINA, AUSTRALIA, AUSTRIA, BELGIUM, BULGARIA, CANADA, CHILE, CHINA, COLOMBIA, CZECH REPUBLIC, DOM.
Flow. Oval Wheel Flowmeter Model DON
Oval Wheel FIowmeter for low and high viscous liquids measuring monitoring analysing DON OO Measuring range: 0.5 36 l/h und 150 2500 l/min OO Viscosity range: 0 1000 cp (higher on request) OO Accuracy:
OMP POSITIVE DISPLACEMENT FLOWMETERS
OMP POSITIVE DISPLACEMENT FLOWMETERS Flow Pressure Level Temperature measurement monitoring control Flow Ranges from 0.53 to 26 GPH to 4 to 92 GPM Handles Viscosities to 1,000,000 cps Pressure Ratings
PMG MAGNETIC FLOWMETER
PMG MAGNETIC FLOWMETER Flow Pressure Level Temperature measurement monitoring control Flow Ranges 0.015-0.5 Through 350-10600 GPM 1/2 to 12 Sizes Accuracy ±0.5% or ±0.25% of Reading Viscosity and Density
Global Dialysis - Cost per Dialysis Session
Cost per session for dialysis where a cost has been entered for a dialysis centre. All costs have been converted to US Dollars as at 19 May 2006. Note that the costs do not state what is covered by a dialysis
Rectangular photoelectric proximity switches
Rectangular photoelectric proximity switches Features Diffuse sensors with operating distance of 300 mm or 800 mm Through-beam sensors with operating distance of 15 or 50 m Reflex sensors with operating
MINI-NBK ECONOMICAL LEVEL INDICATOR
MINI-NBK ECONOMICAL LEVEL INDICATOR Flow Pressure Level Temperature measurement monitoring control N2 316 Stainless Steel Tube Maximum Pressure: 580 PSIG Maximum Temperature: Measuring Lengths to 9.8 Ft.
TER. Thermostats for Industrial Applications. Switching range: C to C. Housing material: aluminium. Capillary tube: copper
Thermostats for Industrial Applications measuring monitoring analysing TER OO Switching range: - 20... + 30 C to 80... +130 C OO Housing material: aluminium OO Capillary tube: copper T1 Model: TER-TX490
Fork through-beam sensors
Fork throughbeam sensors Features Wide range of sizes: fork widths from 2 to 220 mm Metal housings Integrated evaluation unit Connection by means of S8 connector Degree of protection Adjustable sensitivity
Selection Guide for P Series Pump Accessories & Options
Selection Guide for P Series Pump Accessories & Options Contents Page Calibration Cylinders...2 Back Pressure & Pressure Relief Valves...3 Pulsation Dampeners...6 Motors & Controllers...9 Calibration Cylinders
Vortex In Line Flow Meter
Principles of Operation Vortices are created when a fluid passes around a bluff body as shown below. Vortices are alternately shed on each side of the body, 0 degrees out of phase to each other, resulting
OMP Positive Displacement Flowmeters
Flow Ranges From 0.53 to 26 GPH Through 4 to 132 GPH Handles Viscosities to 1,000,000 cps Handles Viscosities to 1,000,000 cps Low Head Loss Oval Gear Design OMP Series Medium & High Flow Meters OMP-1
ISTEC MAGNETIC METERS
ISTEC MAGNETIC METERS MEASURE ANY CONDUCTIVE LIQUIDS OR SLURRIES (EVEN ABRASIVE OR CORROSIVE) WITH THE NEW MICROPROCESSOR-BASED MAGNETIC METER -- A QUALITY PRODUCT - SIMPLE - RELIABLE - AT AN AFFORDABLE
WORLD MOTOR VEHICLE PRODUCTION BY COUNTRY AND TYPE QUARTERS June 14, 2018
QUARTERS 2017-2018 June 14, 2018 CONTENTS BASEPROTOTAL BASEPROCARS BASEPROLCV BASEPROHCV BASEPROBC Summation of cars, LCVs, HCVs, heavy buses Cars LCVs HCVs Heavy buses Note: The production of cars and
Lifting Instructions for 1336 PLUS and FORCE D Frame Drives
Installation Instructions Lifting Instructions for 1336 PLUS and FORCE D Frame Drives This publication will guide you through the steps needed to properly lift and mount the following drives: 1336 PLUS
DRT. Ring Piston Flow Meter. for low/high Viscous Liquids
Ring Piston Flow Meter for low/high Viscous Liquids measuring monitoring analysing DRT Measuring range: 0.2... 10 L/min to 12... 330 L/min Viscosity range: low viscous to high viscous liquids Accuracy:
Vortex In Line Flow Meter
Vortex In Line Flow Meter Principles of Operation Vortices are created when a fluid passes around a bluff body as shown below. Vortices are alternately shed on each side of the body, 0 degrees out of phase
BP Statistical Review of World Energy June 2017
BP Statistical Review of World Energy June 217 Primary energy 8 Consumption 8 Consumption by fuel 9 66 th edition Primary energy Consumption* Growth rate per annum Million tonnes oil equivalent 26 27 28
Allen-Bradley 1397 Pulse Encoder Interface Card
Installation Instructions IN Allen-Bradley 1397 Pulse Encoder Interface Card Cat. No. 1397-PE Table of Contents What This Option Provides........................ 1 Where This Option Is Used........................
Compressed Air-Supply Meter
Compressed Air-Supply Meter measuring monitoring analysing Completely assembled measuring system for precise supply metering and leakage measurement even with low throughputs Economical with direct mass
Fork through-beam sensors
Fork throughbeam sensors Features Wide range of sizes: fork widths from 2 to 220 mm Metal housings Integrated evaluation unit Connection by means of S8 connector Degree of protection Adjustable sensitivity
SentronicPLUS IO-Link CLASS A Electronic Pressure Regulator. Installation Manual
SentronicPLUS IO-Link CLASS A Electronic Pressure Regulator Installation Manual Sentronic PLUS ASCO NUMATICS Sentronic PLUS Electronic Pressure Regulator Sentronic PLUS is a 3-way proportional valve with
VORTEX IN-LINE FLOW METERS
VORTEX IN-LINE FLOW METERS Principles of Operation Vortices are created when a fluid passes around a bluff body as shown below. Vortices are alternately shed on each side of the body, degrees out of phase
DWU. Paddle Bellows Flow Monitor. for liquids. 1-5 l/min m 3 /h water OAccuracy: ±3... ±5% of full scale OConnection: O
Paddle Bellows Flow Monitor for liquids measuring monitoring analysing DWU OMeasuring O ranges: 1-5 l/min... 900-3600 m 3 /h OAccuracy: O ±3... ±5% of full scale OConnection: O G ⅜... G 2, ⅜" NPT... 2"
Primary energy. 8 Consumption 9 Consumption by fuel. 67 th edition
Primary energy 8 Consumption 9 Consumption by fuel 67 th edition Primary energy Consumption* Growth rate per annum Million tonnes oil equivalent 27 28 29 2 211 212 213 214 215 216 217 217 26-16 Share 217
Contact Device. for Pressure Gauges
Contact Device for Pressure Gauges measuring monitoring analysing For housing diameter 100 mm or 160 mm Slow-action contacts Magnetic spring contacts Inductive contacts Pneumatic contacts KOBOLD companies
PSR/PSE Paddle Flow Monitor for Liquids Switching ranges: L/min water p max : 250 bar, t max
Paddle Flow Monitor for Liquids measuring monitoring analysing PSR/PSE Switching ranges: 2.5-4.8... 383-533 p max : 250 bar, t max : 110 C Connection: G ¼... G 1 ½, ¼ NPT... 1 ½ NPT : or stainless steel
HIRLEKAR. Differential Pressure Instruments. Filter Monitoring Flow Monitoring Level Measurement Pressure Monitoring
HIRLEKAR PRECISION Differential Pressure Instruments Filter Monitoring Flow Monitoring Level Measurement Pressure Monitoring HIRLEKAR PRECISION Introduction rlekar Precision is one of the largest manufacturers
Urchin 7 cflag.ifas.ufl.edu Page 1 of 2 Standard View Export All Visits Permalink Geo Location Jul 1, 2015 - Jul 31, 2015 First Date 2015 Compare to Past Jan Feb Mar Apr May Jun Jul Aug Sep Oct Nov Dec
Corrosion Resistant and Ultra-Pure Rotameters for Accurate Measurement of Liquids and Gases
Corrosion Resistant and Ultra-Pure Rotameters for Accurate Measurement of Liquids and Gases Rotameters Markets/Applications George Fischer rotameters are ideally suited for a multitude of corrosive and
Imports of seed for sowing by country Calendar year 2011 Source: ISF compilation based on official statistics and international seed trade reports
USA 157,432 15,562 464 173,458 523 318 67 908 Germany 195,159 5,913 520 201,592 595 97 22 714 France 125,701 4,389 277 130,367 522 150 11 683 Netherlands 140,899 12,253 796 153,948 250 330 48 628 Italy
F-2600 SERIES INLINE VORTEX FLOW METER
F-2600 SERIES INLINE VORTEX FLOW METER APPLICATIONS Saturated steam Hot water to 500 F (260 C) standard 750 F (400 C) optional Applications with optional pressure sensor Superheated steam to 500 F (260
INSTALLATION, OPERATION AND MAINTENANCE Threaded and Wafer Style Flowmeters
INSTALLATION, OPERATION AND MAINTENANCE Threaded and Wafer Style Flowmeters Table of Contents Page 1. Principle of Operation...2 2. Installation Planning......2 3. Installation...3 3.1 Safety Considerations...
Turbine Wheel Flow Meter
Turbine Wheel Flow Meter Plastic Version for Liquids measuring monitoring analysing Model: TUR with transmitter Model: TUR with pointer indication Measuring ranges: 0.2-5.0 to 2.5-100.0 m 3 /h water Measuring
Oscillating piston flowmeters Series COVOL Positive displacement flowmeter for liquids
Oscillating piston flowmeters Series COVOL Positive displacement flowmeter for liquids Suitable for all kind of liquids Viscosity up to 120000 mpa s Excellent performance with changing process conditions
Variable Area Flowmeters Ori-Flowrator TM Meters
Data Sheet (US) Variable Area Flowmeters Ori-Flowrator TM Meters 10B4000 Low installation cost Linear indication over 12-1/2 to 1 flow range Inexpensive method of measuring large flow rates in direct flow
ABB Automation. Variable Area Dial Flow Indicator Series 10A2227. Series 10A2227 Variable Area Dial Flow Indicator
10A2227 Specification Variable Area Flowmeters Variable Area Dial Flow Indicator Series 10A2227 Easily Installed: Unit mounts directly in vertical pipe line. Indicator case can be positioned 360º around
F-1500 SERIES INSERTION TURBINE FLOW METER FEATURES Belcher Road South, Largo, FL USA Tel +1 (727) Fax +1 (727)
F-1500 SERIES INSERTION TURBINE FLOW METER Insertion turbine flow meters are ideal for use in larger steam lines where downsizing the line size to improve flow measurement is not desirable. In these applications,
Packing Data Installation Instructions
Packing Data PK Installation Instructions This document describes how to install a Dataliner DL10 display in a panel or enclosure and connect power. European Union Directive Compliance wiring and safety
mass flowmeter for compressed air
mass flowmeter for compressed air VARIOMASS ECO pressure and temperature compensated easy and cost effective installation of the sensor no pressure loss caused by the sensor no moving parts, i.e. maintenance
Infographics on Electromobility (January 2019)
Infographics on Electromobility (January 2019) Publisher: BMW Group Corporate Communications Electromobility Last Update: 04.01.2019 Contact: presse@bmw.de ELECTROMOBILITY IN GERMANY. SHARE IN NEW REGISTRATIONS
Vortex Flowmeters VFM 3100 F-T VFM 3100 W-T
KROHNE 10/2001 7.02313.23.00 GR/OP Vortex Flowmeters F-T W-T Variable area flowmeters Vortex flowmeters Flow controllers Electromagnetic flowmeters Ultrasonic flowmeters Mass flowmeters Level measuring
Product Overview INCH
INCH Product Overview CERTIFIED Technology Made in Italy Since 1955 the Varvel Group has been making gearboxes and variators for light industry applications. Reliable partner in power transmission equipment
Pro-V Multivariable Flowmeter Model M24 In-line Vortex
Pro-V Multivariable Flowmeter Model M24 In-line Vortex Pro-V TM Advantage: VorTek Instruments Pro-V multivariable flowmeters utilize three primary sensing elements a vortex shedding velocity sensor, an
Pressure transmitter for general industrial purposes MBS 3000 and MBS 3050
Data sheet Pressure transmitter for general industrial purposes MBS 3000 and MBS 3050 The compact pressure transmitter, type MBS 3000, is designed for use in almost all industrial applications, and offers
PanaFlow MV80. In-line Multivariable Flowmeter for Mass, Temperature, and Pressure. GE Sensing. Applications. Key Benefits
Key Benefits Multivariable vortex flowmeter for measuring volumetric flow, temperature, pressure, density, and mass flow using a single meter Measures most gases, liquids and steam without the need to
Positive displacement flowmeter for continuous flow measurement
8070 Positive displacement flowmeter for continuous flow measurement High accuracy Medium with high viscosity Mounting and dismounting of the electronics by a quarter-turn Connection to Bürkert devices
Pressure transmitter for general purpose Type MBS 1700 and MBS 1750
MAKING MODERN LIVING POSSIBLE Data sheet Pressure transmitter for general purpose Type MBS 1700 and MBS 1750 The compact pressure transmitters MBS 1700 and MBS 1750 are designed for use as a general purpose
Magnetic drive pumps. A worldwide best-seller, our high-quality compact magnetic drive pumps GFRPP. Magnetic drive pumps. series.
MD series Magnetic drive pumps A worldwide best-seller, our high-quality compact magnetic drive pumps Magnetic drive pumps Main material Magnetic drive seal-less pumps are free from leakage problems and
Multivariable Vortex Flow Meter
Multivariable Vortex Flow Meter DVH Sensor Design w/o sealing Fully welded sensor Integrated temperature and pressure measurement (optional) Calculation of mass and density possible High temperature version
CrimpTest-1 kn. Calibration Bracket
CrimpTest-1 kn Calibration Bracket 431-471-02 May 2017 CrimpTest-1 kn Calibration Bracket Manual This manual describes the operation of the calibration test rig part no. 432-671, for the purpose of checking
Total credit to the non-financial sector (core debt), % of GDP Table F1.1
Total credit to the non-financial sector (core debt), % of GDP Table F1.1 2012 2013 2014 2015 2016 Q2 16 Q3 16 Q4 16 Q1 17 Q2 17 Argentina 62.6 66.4 64.6 75.5 75.3 81.7 80.1 75.3 71.6 72.7 Australia 208.0
Pressure transmitter for general industrial purposes Type MBS 3000 and MBS 3050
MAKING MODERN LIVING POSSIBLE Data sheet Pressure transmitter for general industrial purposes Type MBS 3000 and MBS 3050 The compact pressure transmitter, type MBS 3000, is designed for use in almost all
Satellite photo of cloud vortices caused by a mountain (Courtesy of our friends at NASA) tekvorx Operation Showing Simplified Construction
Sensing the pulse of industry tekvorx TV01 Multivariable Vortex flow Sensors Vortex flow sensors derive their name from a natural phenomenon of fluid dynamics. When a gas or relatively low viscosity liquid
KOBOLD DF-MA Flow Transmitter. User Instructions
KOBOLD DF-MA Flow Transmitter User Instructions KOBOLD Instruments Inc. 1801 Parkway View Drive Pittsburgh PA 15205 Phone (412) 788-2830 Fax (412)-788-4890 www.koboldusa.com Manual-DF-MA_12-13 DF-MA Table
DTK. OEM Pelton Wheel Flow Sensor
OEM Pelton Wheel Flow Sensor measuring monitoring analyzing DTK Measuring Range: 0.8...9.5 to 6...90 GPH Water Measures Clear or Opaque Liquids Stainless Steel Body Pelton Wheel Design Requires No Inlet
D6.. Butterfly valves. For controlled operation.
D6.. Butterfly valves. For controlled operation. Water is our element. www.belimo.eu Total solutions for medium and large volumetric flows. Butterfly valves from Belimo are available as classical D6..N
INSERTION flow sensor for continuous flow measurement
INSERTION flow sensor for continuous flow measurement Economic integration in pipe systems without any additional piping 3-wire frequency pulse version to directly interface with PLC s (both PNP and NPN)
F-2700 SERIES INSERTION VORTEX FLOW METER
F-2700 SERIES INSERTION VORTEX FLOW METER APPLICATIONS Saturated steam Hot water to 500 F (260 C) standard 750 F (400 C) optional Applications with optional pressure sensor Superheated steam to 500 F (260
Multivariable Vortex Flow Meter
Multivariable Vortex Flow Meter DVH Sensor Design w/o sealing Fully welded sensor Integrated temperature and pressure measurement (optional) Calculation of mass and density possible High temperature version
F-2700 SERIES INSERTION VORTEX FLOW METER
F-2700 SERIES INSERTION VORTEX FLOW METER CALIBRATION Every ONICON flow meter is wet calibrated in a flow laboratory against standards that are directly traceable to N.I.S.T. A certificate of calibration
Variable Area Flowmeters Armored Purgemeter
Data Sheet (US) Variable Area Flowmeters Armored Purgemeter 10A3200 Function - The armored variable area flowmeter offers new possibilities for metering small flowrates of liquids and gases. The instrument
Electromagnetic flowmeters Series FLOMID Electromagnetic flowmeter for conductive liquids
Electromagnetic flowmeters Series FLOMID Electromagnetic flowmeter for conductive liquids Flow rate measurement is independent of density, temperature, viscosity and pressure Pulsed coil excitation to
NI PS-15/16/17 Side Mount Brackets
INSTALLATION GUIDE NI PS-15/16/17 Side Mount Brackets This document provides the installation procedure for the NI PS-15/16/17 Side Mount Brackets. This accessory is used to mount NI PS-15/16/17 power
Vortex Plate. Model VP General Specification. Product Features
Vortex Plate Product Features Our Inline meters can measure Steam, Gases or Liquids. Heavy Duty & Maintenance Free Design C&C Machined from one piece of solid stainless steel Absolutely NO o-rings or seals
Model Connections Max. Flow Range (H 2 O) 10A A3220 Horizontal ¼ NPT 100 l/h. 10A3225/55 Vertical ¼ NPT 100 l/h. Vertical 1 NPT Vertical 1 G
Data Sheet Field IT Variable Area Flowmeters Armored Purgemeter 10A3200 n n n Function - The armored variable area flowmeter offers new possibilities for metering small flowrates of liquids and gases.
Low Profile Insertion Vortex
Low Profile Insertion Vortex Product Features The same insertion meter can measure Steam, Gases or Liquids. Standardize on an insertion bar that can measure line sizes 2 24 Heavy Duty & Maintenance Free
Magnetic drive pumps A worldwide best-seller, our high-quality compact magnetic drive pumps
MD series Magnetic drive pumps A worldwide best-seller, our high-quality compact magnetic drive pumps Main material Magnetic drive seal-less pumps are free from leakage problems and the need for seal replacement.
VLM20 In-line Vortex Flowmeter
ocal regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
Pressure transmitters for heavy-duty applications MBS 2000 and MBS 2050
Data sheet Pressure transmitters for heavy-duty applications MBS 2000 and MBS 2050 The compact heavy duty pressure transmitters MBS 2000 and MBS 2050 are designed for use in hydraulic applications. MBS
Differential pressure gauges with Bourdon tube
Differential pressure gauges with Bourdon tube Nominal dia. and with movement of Brass or stainless steel measuring monitoring analysing Description These pressure gauges are suitable for measuring of
PYTHON 1500 SERIES CONTROL VALVES. Pneumatic and Electric Actuated
PYTHON 1500 SERIES CONTROL VALVES Pneumatic and Electric Actuated Table of Contents Features and Benefits... 3 Specifications, Weights, and Dimensions... 4-5 Trim Options and CV Values... 6 Pneumatic Actuators...
F-1500 SERIES INSERTION TURBINE FLOW METER
F-1500 SERIES INSERTION TURBINE FLOW METER APPLICATIONS Saturated steam Hot water to 450 F (232 C) standard 850 F (454 C) optional Applications with optional pressure sensor Superheated steam to 450 F
Special Purpose Transmitters
Special Purpose Transmitters Type UT-10/UT-11 UNITRANS Universal Pressure Transmitter User Adjustable Turndown of up to 1:20 Large, Easy-to-Read LCD includes Bar Graph and Trend Display The UniTrans pressure