SECURITY CABINETS (B & C Class)

Transcription

1 SECURITY CABINETS (B & C Class)

2 DRAWER CABINET SCEC Approved Class B and Class C Manufactured in Melbourne by Planex 1.6mm fully welded steel body 5.0mm drawer fronts Lock mounted on 5mm steel plate, Available in over 100 colours Heavy-duty slides guaranteed for 100,000 operations Double-skin top to prevent access to the top drawer and locking system Recessed drawers with minimum gap clearance to prevent forced opening of drawers Heavy duty barrier panels between drawers to prevent access from one drawer to another Anti-tilt mechanism to prevent more than one drawer from being opened at a time No. of Drawers Security Level Code Height Width Depth Weight KG 1 (low height) Class C Bi-Lock 27-DR1-LF Class C Bi-Lock 27-DR (under desk) Class C Bi-Lock 27-DR Class C Bi-Lock 27-DR Class C Bi-Lock 27-DR Class C Bi-Lock 27-DR (low height) Class B S & G 2740 Lock 27-DR1BS-LF Class B S & G 2740 Lock 27-DR1BS (under desk) Class B S & G 2740 Lock 27-DR2BS Class B S & G 2740 Lock 27-DR2BS Class B S & G 2740 Lock 27-DR3BS Class B S & G 2740 Lock 27-DR4BS (low height) Class B Kaba X10 27-DR1BK (under desk) Class B Kaba X10 27-DR2BK Class B Kaba X10 27-DR2BK Class B Kaba X10 27-DR3BK Class B Kaba X10 27-DR4BK

3

4 RECEDING DOOR CABINET SCEC Approved Class B and Class C CONSTRUCTION 1.6mm fully welded steel body 1.6mm (class B) or 1.2mm (class C) fully welded steel doors with 5.0mm steel lock mounting plates, Double skin top hamper, bottom plinth and sides FEATURES When open, receding doors protrude only 160mm left hand side (class B & class C) and 220mm right hand side (class C) 290mm right hand side (class B) When doors are shut, outside edges of doors positively engage with cabinet body to protect hinges and door slides. Easy glide receding door mechanism fitted with high performance slides, hinges and weight bearing transfer balls Internal cabinet walls slotted at 25mm intervals for shelves and other internal fittings Security Level Height Width Depth Weight KG Code Filing Capacity Levels A4 lever arch binders Lateral Shelf Files L Oblique TUB Files Pull Out File Frames Class C Bi-Lock DO2R Class C Bi-Lock DO2R Class C Bi-Lock DO2R Class C Bi-Lock DO2R Class B S & G 2740 Lock DO2RBS Class B S & G 2740 Lock DO2RBS Class B S & G 2740 Lock DO2RBS Class B S & G 2740 Lock DO2RBS Class B Kaba X DO2RBK Class B Kaba X DO2RBK Class B Kaba X DO2RBK Class B Kaba X DO2RBK

5

6 SWING DOOR CABINET SCEC Approved Class B and Class C CONSTRUCTION 1.6mm fully welded steel body 1.6mm fully welded steel doors 5.0mm steel lock mounting plates LOCK FUNCTION SCEC-Approved locking mechanism protected by a separate metal panel Indirect locking system that prevents forcing of the locking mechanism. Security Level Height Width Depth Weight KG Code Filing Capacity Levels A4 lever arch binders Lateral Shelf Files L Oblique TUB Files Pull Out File Frames Class C Bi-Lock DO Class C Bi-Lock DO Class B S & G 2740 Lock DO2BS Class BS & G 2740 Lock DO2BS Class B Kaba X DO2BK Class B Kaba X DO2BK

7

8 L OBLIQUE FILES L Oblique is the world s most elegant and sophisticated filing system. Imported from France for use in Planex or other cabinets. All L Oblique folders are made from high quality Swedish Kraft board (250gsm) and feature the continuous linkage system that uses a patented press-stud arrangement holding folders together. This reduces misfiling and stops files falling off the suspension rails. The L Oblique filing system can be tailored to suit individual preferences, available space, speed of retrieval and frequency of access. Across the range, L Oblique files feature flat bases of varying widths. From the traditional V base through to the ultra-wide 80mm base perfect for companies that store files with hundreds of pages. To be used with L Oblique Pull-Out File Frame Drawer Files V base 23-FAZO39 15mm flat base 30mm flat base 23-FAZO FAZO3930 Hanging Lateral Files (for L Oblique Rail Assemblies) V base 23-FCO0 15mm flat base 30mm flat base 50mm flat base 80mm flat base 23-FC FC30O 23-FC50O 23-FC80

9

10 ACCESSORIES Drawer Cabinet Swing Door Cabinet Receding Door Cabinet Accessory Code Code Code Shelf N/A 27-DO2-SHU 22-SHU-1050 Rear Stop N/A 27-DO2-SHU-RS 22-SHU-RS-1050 Divider 27-DR-DRCP 22-SHU-DIV 22-SHU-DIV Pull Out Shelf N/A 27-DO2-SHPO 22-SHPO-0900 L Oblique Rail Assembly N/A 27-DO2-FRAD2 24-FRAD Pull-Out File Frame east west N/A 27-DO2-SF-EW SF-EW Pull-Out File Frame north south N/A N/A 22-SF-NS

11 SECURITY CABINETS SCEC Approved Class B and Class C Australian made Our products are the result of our modern; purpose built (2002) facility, using state of the art equipment as well as the energy, imagination & experience of our workmates. Many of our team have been practicing their craft for two generations. ISO14001 & 9001 Our cabinets are built using third party certified management systems that satisfy the requirements of ISO14001 (Environmental Management System) and ISO9001 (Quality Management System). These systems help us to minimise the harmful effects on the environment caused by our manufacturing activities and to achieve continual improvement of our environmental (performance and product quality. Construction All Planex Class B & Class C security cabinets are constructed to provide visible evidence of any physical attack. Accessories Accessories ordered separately. Warranty 10 year warranty on cabinets. Locks as per manufacturer. Please note: Cabinets are not fire rated. Cabinets cannot be fitted with mechanical combination locks. All Planex security cabinets are registered with a unique code. Lock Function Class C fitted with SCEC-Approved Australian Lock Company Bi-LockTM, Class B fitted with SCEC-Approved S & G 2740 Lock or Kaba X10 locking system. A full lock audit function is possible with Class B LaGardTM (Audit Cable required). Finish Cabinets and accessories are pre-treated with an anti-rust phosphate treatment and finished with a high performance powder coat available in over 100 colours and finishes with other colours available subject to quantity and lead-time. Manufactured in Australia by Planex Environmental certification ISO Quality Assurance certification ISO9001. Document information may be subject to change without notification Planex Oct 2014 Photography: Alex Coppel Brochure design: 5678 Design

12 Head Office / Manufacturing 191 Princes Highway, Hallam VIC Australia 3803 PO Box 125 Hallam 3803 Tel: Fax: Melbourne: info@planex.com.au Sydney Showroom (Mon - Fri, 9am - 5pm by appointment only) Studio 4, Level Victoria Street, Erskineville NSW 2043 Tel: Fax: Sydney: info@planex.com.au Adelaide Showroom (Mon - Fri, 9am - 5pm by appointment only) 238 Grenfell Street, Adelaide SA 5000 Tel: Adelaide: info@planex.com.au Perth The Design Collective 7 Queen Street, Western Australia WA 6000 Tel: Mob: Perth: info@planex.com.au Brisbane Tel: Brisbane: info@planex.com.au Tasmania Tel: Tasmania: info@planex.com.au ACT Tel: ACT: info@planex.com.au Information in this document may be subject to change without notification. Brochure Design By Sugarfree. Planex Oct