Manufactured in compliance with NSF/ANSI a

Size: px
Start display at page:

Download "Manufactured in compliance with NSF/ANSI a"

Transcription

1 IAPMO esearch and Testing, Inc. is a product certification body which tests and inspects samples taken from the supplier's stock or from the market or a combination of both to verify compliance to the requirements of applicable codes and standards. This activity is coupled with periodic surveillance of the supplier's factory and warehouses as well as the assessment of the supplier's Quality Assurance System. This listing is subject to the conditions set forth in the characteristics below and is not to be construed as any recommendation, assurance or guarantee by IAPMO esearch and Testing, Inc. of the product acceptance by Authorities Having Jurisdiction. The most updated information on this ertificate of Listing is available online at pld.iapmo.org Effective Date: not available Jl. Simo Pomahan p Surabaya, Indonesia Identification: haracteristics: Manufactured in compliance with NSF/ANSI a Products listed on this certificate have been tested by an IAPMO &T recognized laboratory. This recognition has been granted based upon the laboratory's compliance to the applicable requirements of ISO/IE MODELS: Group Part No Gate (200 Gate (200 Gate (200 Gate (200 Gate (200 Gate (200 Gate (200 Gate (200 Size 1/4" 3/8" 1-1/4" 1-2" This listing period is based upon the last date of the month indicated on the Effective Date and Void After Date shown above. Any change in material, manufacturing process, marking or design without having first obtained the approval of the Product ertification ommittee, or any evidence of non-compliance with applicable codes and standards or of inferior workmanship, may be deemed sufficient cause for revocation of this listing. Production of or reference to this form for advertising purposes may be made only by specific written permission of IAPMO esearch and Testing, Inc. Any alteration of this certificate could be grounds for revocation of the listing.

2 **Ice Maker Group Part No Gate (200 Gate (200 Gate (200 Gate & Waste (200 Gate & Waste (200 Gate & Waste (200 Gate & Waste (200 Gate & Waste (200 Gate & Waste (200 Boiler Drains Less SB Boiler Drains Long Shank Ice Maker Gate (200 Gate (200 Gate (200 Gate (200 Gate (200 Gate (200 Gate ( " 4" 3/8" 1-1/4" 1-2" 1/4" 3/8" 1 " 1-1/4" 1- Size 2" 2-3" 4" 1-1/4" 1-2"

3 Group Stop Part No Male Boiler Drains Male Boiler Drains Male Boiler Drains w/stuffing Box Male Boiler Drains w/stuffing Box S.Faucet Boiler Drains S.Faucet Boiler Drains Female Boiler Drains Female Boiler Drains Boiler Drains Long Shank Boiler Drains Long Shank Male Hose Bibb No Kink Male Hose Bibb No Kink Female Hose Bibb No Kink Female Hose Bibb No Kink Solder Hose Bibb No Kink Male Heavy Duty Boiler Drain Male Heavy Duty Boiler Drain Female Heavy Duty Boiler Drain Female Heavy Duty Boiler Drain Male Boiler Drain w/lock Nut Hose Bibb Hose Bibb Stop Stop Stop 1/4" 3/8" Size Brass Stop Stop w/ross Handle Stop & Waste Stop & Waste Stop 3/8" x Stop x Stop Stop & Waste 3/8" Stop & Waste Stop & Waste Sillcock

4 **Bent Nose Garden **Bent Nose Garden **Bent Nose Garden **Inverted Sillcock Bent Nose Garden Bent Nose Garden Bent Nose Garden Inverted Heavy Duty Sillcock Heavy Duty Sillcock Silcock x NOTE: "*" = omplies with Section 8 of NSF "**" = omplies with Section 9 of NSF

5 ADDITIONAL OMPANY LISTINGS: Mueller Industries, Inc. Gate Model No /4" 3/8" 1 1/4" 1 2" 2 3" 4" 3/8" 1 1/4" 1 2" 1/4" 3/8" 1 1/4" 1 2" 2 3"

6 " 1 1/4" 1 2" 1/4" 3/8" Gate and Waste Model No Stop Model No /4" 3/8" 3/8" WITH OSS HANDLE WITH OSS HANDLE & WASTE & WASTE & WASTE & WASTE 3/8"

7 & WASTE 3/8" & WASTE & WASTE & WASTE & WASTE Bent Nose Garden Model No BOILE DAINS LESS SB BOILE DAINS LONG SHANK IE MAKE MALE BOILE DAINS MALE BOILE DAINS MALE BOILE DAINS MALE BOILE DAINS MALE BOILE DAINS WITH MALE BOILE DAINS WITH OMPESSION INLET OMPESSION INLET OMPESSION INLET S. FAUET BOILE DAINS S. FAUET BOILE DAINS FEMALE BOILE DAINS FEMALE BOILE DAINS FEMALE BOILE DAINS FEMALE BOILE DAINS BOILE DAINS LONG SHANK BOILE DAINS LONG SHANK EVAPOATIVE OOLE EVAPOATIVE OOLE EVAPOATIVE OOLE DUAL WASHING MAHINE DUAL WASHING MAHINE DUAL WASHING MAHINE MALE HOSE BIBB NO KINK MALE HOSE BIBB NO KINK

8 MALE HOSE BIBB NO KINK MALE HOSE BIBB NO KINK FEMALE HOSE BIBB NO KINK FEMALE HOSE BIBB NO KINK FEMALE HOSE BIBB NO KINK FEMALE HOSE BIBB NO KINK SOLDE HOSE BIBB NO KINK SOLDE HOSE BIBB NO KINK MALE HEAVY DUTY BOILE DAINS MALE HEAVY DUTY BOILE DAINS MALE HEAVY DUTY BOILE DAINS MALE HEAVY DUTY BOILE DAINS FEMALE HEAVY DUTY BOILE DAINS FEMALE HEAVY DUTY BOILE DAINS FEMALE HEAVY DUTY BOILE DAINS FEMALE HEAVY DUTY BOILE DAINS MALE BOILE DAINS WITH HOSE BIBB HOSE BIBB HOSE BIBB HOSE BIBB SILLOK SILLOK SILLOK SILLOK BENT NOSE GADEN BENT NOSE GADEN BENT NOSE GADEN BENT NOSE GADEN BENT NOSE GADEN INVETED HEAVY DUTY SILLOK HEAVY DUTY SILLOK HEAVY DUTY SILLOK SILLOK SILLOK

Effective Date: March 2018 Void After: March 2019

Effective Date: March 2018 Void After: March 2019 IAPMO Research and Testing, Inc. is a product certification body which tests and inspects samples taken from the supplier's stock or from the market or a combination of both to verify compliance to the

More information

Effective Date: January 2017 Void After: January Product: ABS-DWV Pipe and Fittings File No. 1909

Effective Date: January 2017 Void After: January Product: ABS-DWV Pipe and Fittings File No. 1909 IAPMO Research and Testing, Inc. is a product certification body which tests and inspects samples taken from the supplier's stock or from the market or a combination of both to verify compliance to the

More information

Effective Date: May 2018 Void After: May Product: Flexible Water Connectors File No. 5747

Effective Date: May 2018 Void After: May Product: Flexible Water Connectors File No. 5747 IAPMO Research and Testing, Inc. is a product certification body which tests and inspects samples taken from the supplier's stock or from the market or a combination of both to verify compliance to the

More information

California Lead Plumbing Law Devices and Components

California Lead Plumbing Law Devices and Components IAPMO Research and Testing, Inc. is a product certification body which tests and inspects samples taken from the supplier's stock or from the market or a combination of both to verify compliance to the

More information

Effective Date: not available -Rev. 10/4/2012- Void After: Product: Lead Free Plumbing Products File No. 6371

Effective Date: not available -Rev. 10/4/2012- Void After: Product: Lead Free Plumbing Products File No. 6371 IAPMO Research and Testing, Inc. is a product certification body which tests and inspects samples taken from the supplier's stock or from the market or a combination of both to verify compliance to the

More information

Effective Date: May Rev. 1/9/2018- Void After: May Product: Lead Free Plumbing Products File No. 6905

Effective Date: May Rev. 1/9/2018- Void After: May Product: Lead Free Plumbing Products File No. 6905 IAPMO Research and Testing, Inc. is a product certification body which tests and inspects samples taken from the supplier's stock or from the market or a combination of both to verify compliance to the

More information

Effective Date: June Rev. 3/26/2018- Void After: June Product: Plumbing Fixture Fittings File No. 4617

Effective Date: June Rev. 3/26/2018- Void After: June Product: Plumbing Fixture Fittings File No. 4617 IAPMO Research and Testing, Inc. is a product certification body which tests and inspects samples taken from the supplier's stock or from the market or a combination of both to verify compliance to the

More information

Effective Date: June Rev. 7/20/2017- Void After: June 2018

Effective Date: June Rev. 7/20/2017- Void After: June 2018 IAPMO Research and Testing, Inc. is a product certification body which tests and inspects samples taken from the supplier's stock or from the market or a combination of both to verify compliance to the

More information

Effective Date: June 2017 Void After: June Product: Ceramic Plumbing Fixtures File No. 1744

Effective Date: June 2017 Void After: June Product: Ceramic Plumbing Fixtures File No. 1744 IAPMO Research and Testing, Inc. is a product certification body which tests and inspects samples taken from the supplier's stock or from the market or a combination of both to verify compliance to the

More information

Effective Date: February Rev. 7/11/2018- Void After: February Product: Plumbing Fixtures (Lavatories) File No. 3006

Effective Date: February Rev. 7/11/2018- Void After: February Product: Plumbing Fixtures (Lavatories) File No. 3006 IAPMO Research and Testing, Inc. is a product certification body which tests and inspects samples taken from the supplier's stock or from the market or a combination of both to verify compliance to the

More information

ANGLE BALL VALVES STRAIGHT BALL VALVES STRAIGHT BRASS BALL VALVES BARB BRASS BALL VALVES. Description STANDARD PORT BALL VALVES.

ANGLE BALL VALVES STRAIGHT BALL VALVES STRAIGHT BRASS BALL VALVES BARB BRASS BALL VALVES. Description STANDARD PORT BALL VALVES. ANGLE BALL VALVES IBVA4-2M ibva4-4 1/4" COMPRESSION x 1/8" MPT chrome angle ball valve 1/4" COMPRESSION x 1/4" FPT chrome angle ball valve STRAIGHT BALL VALVES IBV4-4 1/4" FPT X 1/4" FPT INLINE CHROME

More information

ROUGH PLUMBING. premium industrial products

ROUGH PLUMBING. premium industrial products ROUGH PLUMBING premium industrial products PREMIUM QUALITY PLUMBING PRODUCTS AMRAM AFFILIATE BRANDS For years, Cambridge Resources has been a primary source of premium quality cable management, hose clamps,

More information

2010 PRODUCT CATALOG QUALITY AND COMMITMENT TO TECHNOLOGY AND SERVICE SINCE 1954

2010 PRODUCT CATALOG QUALITY AND COMMITMENT TO TECHNOLOGY AND SERVICE SINCE 1954 R 2010 PRODUCT CATALOG QUALITY AND COMMITMENT TO TECHNOLOGY AND SERVICE SINCE 1954 R The Isolator Uni-Flange Ball Valve FullPortForgedBrassBallValves Forged Ball w/ Bonus Wing Style T Handle, Nuts & Bolts

More information

CATALOG C-PSP-0311 AHEAD OF THE FLOW. Plumbing Specialty Products

CATALOG C-PSP-0311 AHEAD OF THE FLOW. Plumbing Specialty Products CATALOG C-PSP-0311 AHEAD OF THE FLOW Plumbing Specialty Products Business-to-Business Solutions Look to NIBCO for technology leadership. The velocity with which e-business evolves demands that new products

More information

QUALITY REQUIREMENTS FOR JUST IN TIME SERVICE PROVIDER (JIT S.P.) PROGRAM: ALL

QUALITY REQUIREMENTS FOR JUST IN TIME SERVICE PROVIDER (JIT S.P.) PROGRAM: ALL QUALITY REQUIREMENTS FOR JUST IN TIME SERVICE PROVIDER (JIT S.P.) PROGRAM: ALL THE CONTENT OF THIS DOCUMENT IS THE PROPERTY OF ALENIA AERONAUTICA S.p.A. THIS DOCUMENT IS SUPPLIED IN CONFIDENCE AND COMMERCIAL

More information

CATALOGUE Valves ~ Faucets ~ Specialties ~ Fittings & Nipples

CATALOGUE Valves ~ Faucets ~ Specialties ~ Fittings & Nipples CATALOGUE 2015 Valves ~ Faucets ~ Specialties ~ Fittings & Nipples CATALOGUE SECTIONS Click to go to section Pages 1-1 to 1-16 Pages 2-1 to 2-10 Pages 3-1 to 3-30 Pages 4-1 to 4-28 Part Number Numerical

More information

DEMA MODELS P203CTC.PI.1,.2,.3 INSTALLATION INSTRUCTIONS

DEMA MODELS P203CTC.PI.1,.2,.3 INSTALLATION INSTRUCTIONS I. PARTS: A. 1 pc. Cyclone Portable Injector B. 1 pc. Foot Strainer & 1/4" I.D. Tubing. C. 1 pc. Ceramic Weight. D. 1 pc. Instruction Sheet D. 2 pc. 3 hose w/ female x female GHT fittings on both ends

More information

TABLE OF CONTENTS. BALL VALVE Full port Standard port...5 Gas...5 Pex...6 Long bonnet...8 T-handle...5 Balancing valve...13

TABLE OF CONTENTS. BALL VALVE Full port Standard port...5 Gas...5 Pex...6 Long bonnet...8 T-handle...5 Balancing valve...13 TABLE OF CONTENTS BALL VALVE Full port...4-5 Standard port...5 Gas...5 Pex...6 Long bonnet...8 T-handle...5 Balancing valve...13 STOP VALVE Straight stop...8 Angle stop...8 Long bonnet...8 Stop & Waste...7

More information

A. This Section includes the following domestic water piping specialties:

A. This Section includes the following domestic water piping specialties: SECTION 221119 - DOMESTIC WATER PIPING SPECIALTIES PART 1 - GENERAL 1.1 SUMMARY A. This Section includes the following domestic water piping specialties: 1. Backflow preventers. 2. Water pressure-reducing

More information

COPPER FITTINGS FOR PLUMBING AND MECHANICAL APPLICATIONS

COPPER FITTINGS FOR PLUMBING AND MECHANICAL APPLICATIONS COPPER FITTINGS FOR PLUMBING AND MECHANICAL APPLICATIONS Job Name Job Location Engineer Contractor Wholesaler Streamline Rep Product Description: Streamline Wrot Copper Pressure and DWV fittings for use

More information

T&S BRASS AND BRONZE WORKS, INC.

T&S BRASS AND BRONZE WORKS, INC. Saddleback Cove / P.O. Box 088 Travelers Rest, SC 9690 B-0708 Travelers Rest, SC: 800-476-403 Simi Valley, CA: 800-43-050 Fax: 864-834-358 www.tsbrass.com 4 7/6" 3mm This Space for Architect/Engineer Approval

More information

Universal Bevel Drives Service Manual

Universal Bevel Drives Service Manual Engineering Service Bulletin #SB241202 Universal Bevel Drives Service Manual Cautions Following are some general cautions. All personnel shall use safe and sound practices and take all necessary precautionary

More information

Vacuum Breakers. Brass Construction 3/4 MHT Outlet

Vacuum Breakers. Brass Construction 3/4 MHT Outlet Vacuum Breakers Brass Construction 3/4 MHT Outlet MASTER ITEM # DESCRIPTION INNER CAR- TON QTY CARTON QTY HPVVBRB 3/4 FHT x 3/4 MHT Rough Brass 20 200 HPVVBCP 3/4 FHT x 3/4 MHT Chrome Plated 20 200 1 Body

More information

UP-0515 Effective: 05/18/15

UP-0515 Effective: 05/18/15 Ultra-Pure List Price Sheet For Use in Potable Water Service UP-0515 Effective: 05/18/15 A Milwaukee Valve Product Revised: 06/12/17 Suggested list prices are subject to change without notification. Visit

More information

DEMA MODEL 603T-WI INSTALLATION INSTRUCTIONS

DEMA MODEL 603T-WI INSTALLATION INSTRUCTIONS DEMA MODEL 603T-WI I. PARTS: A. Select-O-Matic Assembly B. 2 Pcs. Foot Strainers & 1/4" ID Tubing C. 4 Pcs. Mounting Screws & Anchors D. 1 Pc. 100-15K Metering Tip Kit (603T Only) E. 1 Pc. Backflow Preventer

More information

CHAPTER 20.1 WASTEWATER HAULING. Section Definitions. For the purposes of this article, the following definitions shall apply:

CHAPTER 20.1 WASTEWATER HAULING. Section Definitions. For the purposes of this article, the following definitions shall apply: CHAPTER 20.1 WASTEWATER HAULING Section 20.1-1. Definitions. For the purposes of this article, the following definitions shall apply: Commercial wastewater shall mean the liquid or liquid-borne wastes

More information

EVALUATION SUBJECT: EPA WATERSENSE HUNTER INDUSTRIES WEATHER-BASED IRRIGATION CONTROLLERS

EVALUATION SUBJECT: EPA WATERSENSE HUNTER INDUSTRIES WEATHER-BASED IRRIGATION CONTROLLERS ICC-ES Report PMG-1134 Reissued 11/21/2017 This report is subject to renewal 07/2018 EVALUATION SUBJECT: EPA WATERSE HUNTER INDUSTRIES WEATHER-BASED IRRIGATION CONTROLLERS DIVISION: 22 00 00 PLUMBING SECTION:

More information

DEMA SPRAY CLEAN MODELS: 244CDF & 244CDFT INSTALLATION INSTRUCTIONS

DEMA SPRAY CLEAN MODELS: 244CDF & 244CDFT INSTALLATION INSTRUCTIONS I. PARTS: A. Injector. B. Spray gun. C. Mounting screws and washers. D. Vinyl supply tubing, foot strainer & ceramic weight. E. Metering tip (specified size, model 244CDFT only). II. INSTALLATION: (See

More information

DEMA MODEL 606T-WI INSTALLATION INSTRUCTIONS

DEMA MODEL 606T-WI INSTALLATION INSTRUCTIONS DEMA MODEL 606T-WI INSTALLATION INSTRUCTIONS I. PARTS: A. Select-O-Spray Assembly B. 2 Pcs. Foot Strainers & 1/4" ID Tubing C. 4 Pcs. Mounting Screws & Anchors D. 1 Pc. 100-15K Metering Tip Kit E. 1 Pc.

More information

PASSAIC COUNTY TECHNICAL INSTITUTE CCA 1422 NEW S.T.E.M. BUILDING 2017

PASSAIC COUNTY TECHNICAL INSTITUTE CCA 1422 NEW S.T.E.M. BUILDING 2017 SECTION 221119 - DOMESTIC WATER PIPING SPECIALTIES PART 1 - GENERAL 1.1 SUMMARY A. Section Includes: 1. Vacuum breakers. 2. Backflow preventers. 3. Water pressure-reducing valves. 4. Balancing valves.

More information

Trunnion Ball Valve Catalogue

Trunnion Ball Valve Catalogue Trunnion Ball Valve Catalogue Introduction "Fusion" is the registered trademark of Archmetal Industries, a member of the Fortune Group. * The Fortune Group is a world class producer of a full range of

More information

Table of Contents. SeaTechInc.com

Table of Contents. SeaTechInc.com Table of Contents 1-2 Technical Information 3 Tubing for 35 Series 4-5 10 Series Fittings 6-11 35 Series Fittings and Valves 12 35 Series Quick Connect Manifold, Configuration Styles 13 35 Series Quick

More information

National Board Update

National Board Update National Board Update Presentation to the Valve Repair Council June 2, 2016 Prepared by: Joseph F. Ball, P.E. National Board Update National Board activities Who we are and what we do National Board Inspection

More information

PLUMBING VALVES TOTAL MAINTENANCE SOLUTIONS

PLUMBING VALVES TOTAL MAINTENANCE SOLUTIONS BRONZE STOP VALVES Domestic Import 40300283 1/4 Iron pipe thread 57842032 3/8 Iron pipe thread 40300284 1/2 Iron pipe thread 57021034 40300285 3/4 Iron pipe thread 57021036 BR ONZE GATE VALVES 125 psi.

More information

EVALUATION SUBJECT: CAST IRON SOIL PIPE AND FITTINGS

EVALUATION SUBJECT: CAST IRON SOIL PIPE AND FITTINGS ICC-ES Report PMG-1220 Reissued 11/2017 This report is subject to renewal 11/2018 EVALUATION SUBJECT: CAST IRON SOIL PIPE AND FITTINGS DIVISION: 22 00 00 PLUMBING SECTION: 22 13 16 SANITARY WASTE AND VENT

More information

CITY OF NEWPORT NEWS - WATERWORKS APPLICATION FOR HYDRANT METER ASSEMBLY & SERVICE PERMIT

CITY OF NEWPORT NEWS - WATERWORKS APPLICATION FOR HYDRANT METER ASSEMBLY & SERVICE PERMIT CITY OF NEWPORT NEWS - WATERWORKS APPLICATION FOR HYDRANT METER ASSEMBLY & SERVICE PERMIT A Hydrant Meter Assembly (HMA) and Hydrant Meter Service Permit will be issued for water service not intended for

More information

EVALUATION SUBJECT: >B< MAXIPRO PRESS FITTINGS FOR AC AND REFRIGERATION APPLICATION

EVALUATION SUBJECT: >B< MAXIPRO PRESS FITTINGS FOR AC AND REFRIGERATION APPLICATION ICC-ES Report PMG-1440 Issued 09/2017 This report is subject to renewal 09/2018 EVALUATION SUBJECT: >B< MAXIPRO PRESS FITTINGS FOR AC AND REFRIGERATION APPLICATION DIVISION: 23 00 00 HEATING, VENTILATING

More information

DEMA MODEL 604T-WI INSTALLATION INSTRUCTIONS

DEMA MODEL 604T-WI INSTALLATION INSTRUCTIONS DEMA MODEL 604T-WI I. PARTS: A. Select-O-Matic Assembly B. 2 Pcs. Foot Strainers & 1/4" ID Tubing C. 4 Pcs. Mounting Screws & Anchors D. 1 Pc. 100-15K Metering Tip Kit (604T Only) E.1 Pc. Backflow Preventer

More information

Spray Clean 606T-2 Installation Instruction

Spray Clean 606T-2 Installation Instruction Spray Clean 606T-2 Installation Instruction Overview The 606T-2 unit is designed to be used as a spray or foam unit where up to two chemicals can be attached to the unit along with a clean water rinse.

More information

TITLE DEPARTMENT OF ENVIRONMENTAL MANAGEMENT

TITLE DEPARTMENT OF ENVIRONMENTAL MANAGEMENT 250-RICR-120-05-8 TITLE 250 - DEPARTMENT OF ENVIRONMENTAL MANAGEMENT CHAPTER 120 - AIR RESOURCES SUBCHAPTER 05 - AIR POLLUTION CONTROL PART 8 - Sulfur Content of Fuels 8.1 Purpose The purpose of this regulation

More information

MINISTRY OF TRANSPORT, INFRASTRUCTURE, HOUSING, URBAN DEVELOPMENT AND PUBLIC WORKS

MINISTRY OF TRANSPORT, INFRASTRUCTURE, HOUSING, URBAN DEVELOPMENT AND PUBLIC WORKS MINISTRY OF TRANSPORT, INFRASTRUCTURE, HOUSING, URBAN DEVELOPMENT AND PUBLIC WORKS STATE DEPARTMENT OF INFRASTRUCTURE KS 2295 IMPLEMENTATION GUIDELINE FOR LICENSING SPEED LIMITER SUPPLIERS 1. Preamble

More information

LSIC1MO120E V N-channel, Enhancement-mode SiC MOSFET

LSIC1MO120E V N-channel, Enhancement-mode SiC MOSFET LSIMO2E2, 2, 2 mohm, TO-247-3L LSIMO2E2 2 N-channel, Enhancement-mode Si MOSFET RoHS Pb Product Summary haracteristics alue Unit DS 2 Typical R DS(ON) 2 mω I D ( T ) 8 A ircuit Diagram TO-247-3L Features

More information

CNC DISTRIBUTION. ITEM NO Description Quantity

CNC DISTRIBUTION. ITEM NO Description Quantity Valves CNC DISTRIBUTION Brass Ball Valves ITEM NO IPS Ball Valve *600# PSI WOG 150 PSI WSP * Heavy Pattern Forged Brass Construction *Full Port For Maximum Flow *Teflon Seats * Teflon Stem Packing * AGA,

More information

WATTS/Taras. Water Treatment Valves and Accessories. Commercial. Residential

WATTS/Taras. Water Treatment Valves and Accessories. Commercial. Residential WATTS/Taras Water Treatment Valves and Accessories Residential Commercial Taras Valve Company, a division of Watts Industries, has been manufacturing quality by-pass valves and accessories for the Water

More information

Owner s Manual Pelican Whole House Iron and Manganese Filtration System

Owner s Manual Pelican Whole House Iron and Manganese Filtration System Owner s Manual Pelican Whole House Iron and Manganese Page 2 Copyright 2011 Enviro Water Solutions Inc. All rights reserved. All information contained herein is the property of. makes no warranty of any

More information

LSIC1MO170E V N-channel, Enhancement-mode SiC MOSFET

LSIC1MO170E V N-channel, Enhancement-mode SiC MOSFET LSIMOE,, mohm, TO--L LSIMOE N-channel, Enhancement-mode Si MOSFET RoHS Pb Product Summary haracteristics alue Unit DS Typical R DS(ON) mω ( T ). A ircuit Diagram TO--L Features * * Body diode Optimized

More information

Rotary Cutter Drives Service Manual

Rotary Cutter Drives Service Manual Engineering Service Bulletin #SB241227 Rotary Cutter Drives Service Manual Cautions Following are some general cautions. All personnel shall use safe and sound practices and take all necessary precautionary

More information

Spray & Foam Dispenser Item #

Spray & Foam Dispenser Item # Spray & Foam Dispenser Item #92364-00 Spray & Foam Dispenser Item #92364 Table of Contents Section Page 1. Spray & Foam Dispenser Description... 3 2. Spray & Foam Dispenser Installation... 4 3. Chemical

More information

Mur-lok. Mur-lok Polypropylene Quick-Connect Fittings & Valves. Check Valves. Fixed NPTF 90 Elbows. Check Valve Elbow. Swivel NPTF 90 Elbows

Mur-lok. Mur-lok Polypropylene Quick-Connect Fittings & Valves. Check Valves. Fixed NPTF 90 Elbows. Check Valve Elbow. Swivel NPTF 90 Elbows Polypropylene Quick-Connect Fittings & Valves Polypropylene Quick-Connect Fittings & Valves G.A. Murdock offers the largest selection of polypropylene quick-connect fittings and valves on the market. These

More information

Effective Date: not available -Rev. 12/19/2017- Void After: Product: Ceramic Plumbing Fixtures File No. 2924

Effective Date: not available -Rev. 12/19/2017- Void After: Product: Ceramic Plumbing Fixtures File No. 2924 IAPMO Research and Testing, Inc. is a product certification body which tests and inspects samples taken from the supplier's stock or from the market or a combination of both to verify compliance to the

More information

DEMA SPRAY CLEAN MODELS: 241CDF & 241CDFT INSTALLATION INSTRUCTIONS

DEMA SPRAY CLEAN MODELS: 241CDF & 241CDFT INSTALLATION INSTRUCTIONS 1. PARTS A. Bottle holder and injector assembly. B. Spray gun (Model 40-8B). C. 4 mounting screws in envelope. 2. INSTALLATION Mount the bottle holder on wall using the 4 screws provided through the plates

More information

introduction < STANDARDS >

introduction < STANDARDS > Product Data Sheet introduction < STANDARDS > ASTM D1784 ASTM D2464 ASTM F437 ASTM F1498 IPEX VA Air Release Valves are of a unique design, controlled by media and not pressure. Intended for use with tanks,

More information

DEMA 259B DRAIN MASTER Jr. INSTALLATION INSTRUCTION SHEET

DEMA 259B DRAIN MASTER Jr. INSTALLATION INSTRUCTION SHEET I-707 Pg. 1 of 7 Summary The 259B Drain Master is designed to feed chemicals into drains and grease traps to break up grease, detergent build up and eliminate odors. All programming is done by use of a

More information

SECTION GENERAL-SERVICE AIR COMPRESSOR PART 1 - GENERAL

SECTION GENERAL-SERVICE AIR COMPRESSOR PART 1 - GENERAL 13686.00 GENERAL SERVICE AIR COMPRESSOR 221519-1 SECTION 22 1519 - GENERAL-SERVICE AIR COMPRESSOR 1.1 RELATED DOCUMENTS PART 1 - GENERAL A. Drawings and general provisions of the Contract, including General

More information

Section G 01/2018 THE FORD METER BOX COMPANY, INC. CERTIFIED TO ISO 9001: Ford Curb Stops and Meter Valves

Section G 01/2018 THE FORD METER BOX COMPANY, INC. CERTIFIED TO ISO 9001: Ford Curb Stops and Meter Valves DQS Inc. Section G 01/2018 THE FORD METER BOX COMPANY, INC. CERTIFIED TO ISO 9001:2015 10002505 Ford Curb Stops and Meter Valves Contents Page Information Product ing System...3 Features of Ball Valves...4....5

More information

CU6703 Module Installation Guide

CU6703 Module Installation Guide Up to 30% More Horsepower 10-20% Fuel Savings Cummins 6.7L Tier III Engines CU6703 Module Installation Guide AgDieselSolutions.com MAP sensor male and female connectors. Power and Ground wires. Module

More information

Grape Solar STAR Series Connection Guide Copyright 2012, Grape Solar, Inc. All Rights Reserved

Grape Solar STAR Series Connection Guide Copyright 2012, Grape Solar, Inc. All Rights Reserved Grape Solar STAR Series Connection Guide Copyright 2012, Grape Solar, Inc. All Rights Reserved For more information about this kit, visit http://www.grapesolar.com/manuals.html Series vs. Parallel Connections

More information

State of California AIR RESOURCES BOARD. EXECUTIVE ORDER D Relating to Exemptions Under Section of the Vehicle Code

State of California AIR RESOURCES BOARD. EXECUTIVE ORDER D Relating to Exemptions Under Section of the Vehicle Code (Page 1 of 2) State of California AIR RESOURCES BOARD EXECUTIVE ORDER D 176 11 Relating to Exemptions Under Section 27156 of the Vehicle Code DINAN ENGINEERING, INC. HIGH FLOW COLD AIR INTAKE SYSTEM Pursuant

More information

Eye Wash Unit S0201 for Scrub Sinks

Eye Wash Unit S0201 for Scrub Sinks Eye Wash Kit S0201 for Scrub Sinks The Eye Wash Unit provides flushing fluid to both eyes simultaneously. The flushing streams rise to approximately equal heights on both sides. The two spray heads have

More information

Model 6518FR. NOTE TO INSTALLER: Please leave this information with the Maintenance Department. LIMITED WARRANTY

Model 6518FR. NOTE TO INSTALLER: Please leave this information with the Maintenance Department. LIMITED WARRANTY INSTALLATION, OPERATION & MAINTENANCE INSTRUCTIONS 1455 Kleppe Lane Sparks, NV 89431-6467 (775) 359-4712 Fax (775) 359-7424 E-mail: haws@hawsco.com website: www.hawsco.com Model 6518FR No. 2077777(21)

More information

DEPARTMENT OF TRADE AND INDUSTRY NO APRIL 2016

DEPARTMENT OF TRADE AND INDUSTRY NO APRIL 2016 Trade and Industry, Department of/ Handel en Nywerheid, Departement van 438 National Regulator for Compulsory Specifications Act (5/2008): Amendments to the Compulsory Specification for Earth Leakage Protection

More information

SEPARATOR PURGE KIT OPERATION & MAINTENANCE MANUAL

SEPARATOR PURGE KIT OPERATION & MAINTENANCE MANUAL SEPARATOR PURGE KIT OPERATION & MAINTENANCE MANUAL PLEASE RECORD THE FOLLOWING DATA (Information is located on the product label or packing slip) Model Number: Service: Code: Installation Date: Installation

More information

SOLAR DASH CHARGING SYSTEM USER GUIDE

SOLAR DASH CHARGING SYSTEM USER GUIDE SOLAR DASH CHARGING SYSTEM Doc 1.01 INST049 INSTALLATION STEP 1 Place 20 watt solar panel in the dash of the vehicle facing up. Note: For ideal results position the vehicle in a manner in which the solar

More information

PRODUCT CATALOG QUALITY AND COMMITMENT TO TECHNOLOGY AND SERVICE SINCE 1954

PRODUCT CATALOG QUALITY AND COMMITMENT TO TECHNOLOGY AND SERVICE SINCE 1954 PRODUCT CATALOG QUALITY AND COMMITMENT TO TECHNOLOGY AND SERVICE SINCE 1954 THE WEB WARRANTY PRODUCTS BUILT TO LAST A LIFETIME Webstone Company, Inc. warrants all of its products to be free from manufacturer

More information

Installation Manual DIAPHRAGM WELL TANK

Installation Manual DIAPHRAGM WELL TANK Installation Manual DIAPHRAGM WELL TANK IN-LINE SERIES: 2-5 & 7 GALLON VERTICAL SERIES: 14-20-25-32-36-52-65-86-96-119 GALLON HORIZONTAL SERIES: 7-14 & 20 GALLON NO LEAD NO LEAD: The weighted average of

More information

Ballast Water Management Surveyor Guidance An outline of Maritime NZ requirements of Surveyors for the purposes of Ballast Water Management

Ballast Water Management Surveyor Guidance An outline of Maritime NZ requirements of Surveyors for the purposes of Ballast Water Management Ballast Water Management Surveyor Guidance An outline of Maritime NZ requirements of Surveyors for the purposes of Ballast Water Management Ballast water management surveyor guidance Page 1 of 9 Ballast

More information

Product Profile. Product Profile CALIFORNIA TEXAS ILLINOIS GEORGIA NEW YORK. Global sourcing. National compliance. Local service.

Product Profile. Product Profile CALIFORNIA TEXAS ILLINOIS GEORGIA NEW YORK. Global sourcing. National compliance. Local service. Product Profile CALIFORNIA TEXAS ILLINOIS GEORGIA NEW YORK Global sourcing. National compliance. Local service. 1 Introduction Matco-Norca is the leading supplier of globally sourced, code-compliant Plumbing

More information

ActuLink ABS Module - ABS-MOD-400

ActuLink ABS Module - ABS-MOD-400 Installation Instructions ActuLink ABS Module - ABS-MOD-400 For more information on the installation and operation of Tuson s towable ABS system, consult the installation and operations manuals for the

More information

Operating Manual. FloorMaster FS Flooring Stapler A18201 READ ALL SAFETY INSTRUCTIONS

Operating Manual. FloorMaster FS Flooring Stapler A18201 READ ALL SAFETY INSTRUCTIONS Operating Manual FloorMaster FS Flooring Stapler READ ALL SAFETY INSTRUCTIONS items included with tool INCLUDED WITH TOOL Plastic Case Tool Manual Safety Glasses Pneumatic Tool Oil Hex Key x 3 ACCESSORIES

More information

1-BUTTON DISPENSER INSTALLATION INSTRUCTIONS

1-BUTTON DISPENSER INSTALLATION INSTRUCTIONS R 1-BUTTON DISPENSER INSTALLATION INSTRUCTIONS Model: #91162-00 The Green Earth II 1-button dispenser allows you to dispense one product for mop buckets and automatic scrubbers. The modular design lets

More information

IFTA LAW ENFORCEMENT COMMITTEE BEST PRACTICES GUIDE OCTOBER 2016 IFTA

IFTA LAW ENFORCEMENT COMMITTEE BEST PRACTICES GUIDE OCTOBER 2016 IFTA IFTA LAW ENFORCEMENT COMMITTEE BEST PRACTICES GUIDE OCTOBER 2016 IFTA Disclaimer This document was prepared by members of the. It has been reviewed and approved by the IFTA Board. This document should

More information

Operating Instructions & Parts Manual. Truck Drain. Model 48UJ80 and 48UJ81

Operating Instructions & Parts Manual. Truck Drain. Model 48UJ80 and 48UJ81 Operating Instructions & Parts Manual EN Truck Drain Model 48UJ80 and 48UJ81 PLEASE READ AND SAVE THESE INSTRUCTIONS. READ CAREFULLY BEFORE ATTEMPTING TO ASSEMBLE, INSTALL, OPERATE OR MAINTAIN THE PRODUCT

More information

Model 8346/8346CRP Shower & Eye/Face Wash

Model 8346/8346CRP Shower & Eye/Face Wash INSTALLATION, OPERATION & MAINTENANCE INSTRUCTIONS 1455 Kleppe Lane Sparks, NV 89431-6467 (775) 359-4712 Fax (775) 359-7424 E-mail: haws@hawsco.com website: www.hawsco.com No. 2080177(15) Model 8346/8346CRP

More information

Franklin County Public Health Regulation 101 Collection Vehicle Registration, Inspection and Operation for the Prevention of Nuisances

Franklin County Public Health Regulation 101 Collection Vehicle Registration, Inspection and Operation for the Prevention of Nuisances Franklin County Public Health Regulation 101 Collection Vehicle Registration, Inspection and Operation for the Prevention of Nuisances Section 101.01 Collection Vehicle Registration 101.01(A) Collection

More information

The 606T-2 unit is designed to be used as a spray or foam unit where up to two chemicals can be attached to the unit along with a clean water rinse.

The 606T-2 unit is designed to be used as a spray or foam unit where up to two chemicals can be attached to the unit along with a clean water rinse. Overview The 606T-2 unit is designed to be used as a spray or foam unit where up to two chemicals can be attached to the unit along with a clean water rinse. The unit features three ball valves for control

More information

Sludge Dewatering and Odor Control at Plant 1 CONFORMED

Sludge Dewatering and Odor Control at Plant 1 CONFORMED 2. Fire Service Main Interior Piping from Exterior Service up to Fire Sprinkler Alarm Check Valve: a. Pipe: Schedule 40 galvanized steel. b. Fittings: Galvanized 150-pound malleable iron, screwed or Victaulic

More information

SAMPLE COOLER and SLUDGE TRAP OPERATION & MAINTENANCE MANUAL

SAMPLE COOLER and SLUDGE TRAP OPERATION & MAINTENANCE MANUAL SAMPLE COOLER and SLUDGE TRAP OPERATION & MAINTENANCE MANUAL PLEASE RECORD THE FOLLOWING DATA (Information is located on the product label or packing slip) Product: Model No: Serial No: Installation Date:

More information

SYNOPSIS OF PROPOSED GEORGIA DEPARTMENT OF PUBLIC SAFETY RULES CHAPTER TRANSPORTATION NETWORK COMPANIES AND TAXI SERVICES

SYNOPSIS OF PROPOSED GEORGIA DEPARTMENT OF PUBLIC SAFETY RULES CHAPTER TRANSPORTATION NETWORK COMPANIES AND TAXI SERVICES SYNOPSIS OF PROPOSED GEORGIA DEPARTMENT OF PUBLIC SAFETY RULES CHAPTER 570-35 TRANSPORTATION NETWORK COMPANIES AND TAXI SERVICES Purpose: The rules provide for the registration and regulation of transportation

More information

Guidelines for Safety Structure Homologation / Approval

Guidelines for Safety Structure Homologation / Approval TECHNICAL DEPARTMENT MotorSport New Zealand Inc MotorSport House 69 Hutt Road, Thorndon Wellington 6015 PO Box 3793, Wellington 6014 Phone: 04-815-8015 Fax: 04-472-9559 Email: technical@motorsport.org.nz

More information

Delivery Programme for Shipbuilding and Industry Valves, Fittings, Engineering and Service

Delivery Programme for Shipbuilding and Industry Valves, Fittings, Engineering and Service Delivery Programme for Shipbuilding and Industry Valves, Fittings, Engineering and Service Shipbuilding and Industry Our delivery programme for shipbuilding and industry includes: Valves, gate-, butterfly-,

More information

END USER TERMS OF USE

END USER TERMS OF USE END USER TERMS OF USE The following is the End Users Terms of Use as it currently appears in the Mobileye User Manual and Warranty information. This is here for your review and information; it is subject

More information

DEMA SPRAY CLEAN MODELS: 244BC, 244BCE, 244BCP & 244BCT INSTALLATION INSTRUCTIONS

DEMA SPRAY CLEAN MODELS: 244BC, 244BCE, 244BCP & 244BCT INSTALLATION INSTRUCTIONS I. PARTS: A. Injector. B. Spray gun. C. Mounting screws and washers. D. Vinyl supply tubing, foot strainer & ceramic weight. E. Metering tip (specified size, model 244BCT only). II. INSTALLATION: (See

More information

HOSE BOXES. Includes hose boxes, supply boxes & hose valves MORRIS GROUP INTERNATIONAL

HOSE BOXES. Includes hose boxes, supply boxes & hose valves MORRIS GROUP INTERNATIONAL HOSE BOXES Includes hose boxes, supply boxes & hose valves MORRIS GROUP INTERNATIONAL INTEGRAL STOP NON-FREEZE WALL VALVE & BOX Integral Stop Wall Valve & Box with Non-freeze Protection Typical Applications

More information

SOUTH AFRICAN NATIONAL STANDARD

SOUTH AFRICAN NATIONAL STANDARD ISBN 978-0-626-29010-8 SOUTH AFRICAN NATIONAL STANDARD Homologation of motor vehicle models Published by SABS Standards Division 1 Dr Lategan Road Groenkloof Private Bag X191 Pretoria 0001 Tel: +27 12

More information

GRINNELL Model B302 and Model BN302 Grooved End Butterfly Valves with Gear Operators or Lever-Lock Operators General Description

GRINNELL Model B302 and Model BN302 Grooved End Butterfly Valves with Gear Operators or Lever-Lock Operators General Description Worldwide Contacts www.grinnell.com GRINNELL Model B0 and Model BN0 Grooved End Butterfly Valves with Gear Operators or Lever-Lock Operators General Description The GRINNELL Model B0 and Model BN0 Butterfly

More information

DEMA MODELS 606T INSTALLATION INSTRUCTIONS

DEMA MODELS 606T INSTALLATION INSTRUCTIONS I. PARTS: A. Select-O-Spray Assembly B. 2 Pcs. Foot Strainers & 1/4" ID Tubing C. 4 Pcs. Mounting Screws & Anchors D. 1 Pc. 100-15K Metering Tip Kit TABLE 1 Hose I.D. 3/8" 1/2" 5/8" Max. Length 15 ft.

More information

DEMA MODEL 582 FOAM STATION III INSTRUCTION SHEET

DEMA MODEL 582 FOAM STATION III INSTRUCTION SHEET I-866 Pg. 1 of 6 1. PURPOSE: The purpose of the DEMA 582 Foam Station III is to allow a remotely located chemical product source (i.e. a tote) to supply up to three DEMA 582 foam stations without the need

More information

OWNER S MANUAL AND INSTALLATION INSTRUCTIONS

OWNER S MANUAL AND INSTALLATION INSTRUCTIONS EmerGen Switch Manual Transfer Switch OWNER S MANUAL AND INSTALLATION INSTRUCTIONS For A Series Models 6-5001, 6-7501, 10-7501, 10-12K1 PLEASE READ THIS MANUAL IN ITS ENTIRETY BEFORE INSTALLING AND/OR

More information

20250 Module Installation Guide

20250 Module Installation Guide 20250 Module Installation Guide 2013.5-2017 RAM 6.7L Cummins Up to 90HP Gain 1-3 MPG Fuel Savings AgDieselSolutions.com Adjustable switch connector Power +12 volts (Red wire) & Ground (Black wire) Injector

More information

Installation Instructions

Installation Instructions TIMES SQUARE Spread Lavatory Faucet with Speed Connect Drain Installation Instructions 8.80 8.8 Congratulations on purchasing your American Standard faucet with Speed Connect drain, a feature found only

More information

SECTION GENERAL-DUTY VALVES FOR HVAC PIPING. A. Contents of Division 23, HVAC and Division 01, General Requirements apply to this Section.

SECTION GENERAL-DUTY VALVES FOR HVAC PIPING. A. Contents of Division 23, HVAC and Division 01, General Requirements apply to this Section. SECTION 23 05 23 PART 1 - GENERAL 1.1 SUMMARY A. Work Included: 1. Gate Valves 2. Balancing Valves 3. Ball Valves 4. Butterfly Valves 5. Swing Check Valves 1.2 RELATED SECTIONS A. Contents of Division

More information

I-110 PARTS MANUAL Updated 3/21/01

I-110 PARTS MANUAL Updated 3/21/01 I-110 PARTS MANUAL Updated 3/21/01 Ashland Industries Inc. Hwy. 13 South P.O. Box 717 Ashland, WI. 54806 877-634-4622 Toll Free - phone 715-682-4622 phone 715-682-9717 fax www.ashlandind.com MODEL I-100,

More information

DEMA SPRAY STATION II MODEL 606T-2 INSTALLATION INSTRUCTIONS

DEMA SPRAY STATION II MODEL 606T-2 INSTALLATION INSTRUCTIONS The 0T-2 Spray Station II Dispensers are used in any application where a chemical product must be sprayed or foamed without the use of compressed air or a high pressure pump. City water pressure and optional

More information

Operating Instructions & Parts Manual. Oil Control Gun. Models 48UJ82, 48UJ83, 48UJ84, 48UJ85 and 48UJ86

Operating Instructions & Parts Manual. Oil Control Gun. Models 48UJ82, 48UJ83, 48UJ84, 48UJ85 and 48UJ86 Operating Instructions & Parts Manual EN Oil Control Gun Models 48UJ82, 48UJ83, 48UJ84, 48UJ85 and 48UJ86 PLEASE READ AND SAVE THESE INSTRUCTIONS. READ CAREFULLY BEFORE ATTEMPTING TO ASSEMBLE, INSTALL,

More information

PFI Quality Assurance/Quality Control (QA/QC) Program for Residential/Commercial Densified Fuels

PFI Quality Assurance/Quality Control (QA/QC) Program for Residential/Commercial Densified Fuels PFI Quality Assurance/Quality Control (QA/QC) Program for Residential/Commercial Densified Fuels Scope: This program must be utilized by participating pellet fuel manufacturers to assure consistent quality

More information

½"-3" Air/Vacuum Valve Models 100S to 103S

½-3 Air/Vacuum Valve Models 100S to 103S Manual No. A/VV-OM1-4 ½"-3" Air/Vacuum Valve Models 100S to 103S Operation, Maintenance and Installation Manual INTRODUCTION... 1 RECEIVING AND STORAGE... 1 DESCRIPTION OF OPERATION... 1 INSTALLATION...

More information

TITLE 165. CORPORATION COMMISSION CHAPTER 16. ANTIFREEZE EFFECTIVE SEPTEMBER 11, 2017

TITLE 165. CORPORATION COMMISSION CHAPTER 16. ANTIFREEZE EFFECTIVE SEPTEMBER 11, 2017 TITLE 165. CORPORATION COMMISSION CHAPTER 16. ANTIFREEZE EFFECTIVE SEPTEMBER 11, 2017 Last Amended The Oklahoma Register Volume 34, Number 24 September 1, 2017 publication Pages 787-2226 PLEASE NOTE: This

More information

State of California AIR RESOURCES BOARD EXECUTIVE ORDER NVR-1-C. Relating to Certification of Non-Vapor Recovery Hoses

State of California AIR RESOURCES BOARD EXECUTIVE ORDER NVR-1-C. Relating to Certification of Non-Vapor Recovery Hoses State of California AIR RESOURCES BOARD EXECUTIVE ORDER NVR-1-C Relating to Certification of Non-Vapor Recovery Hoses For Use at Gasoline Dispensing Facilities with No Phase II Vapor Recovery Systems WHEREAS,

More information

Lighting Retrofit Incentive Application for Business Customers

Lighting Retrofit Incentive Application for Business Customers Lighting Retrofit Incentive Application for Business Customers 2019 A Cash Incentive Energy Efficiency Program brought to you by: IMPORTANT INSTRUCTIONS: Step 1: Determine Eligibility: Pre-approval is

More information

Strahman. Since Strahman full line catalogue Hoses Nozzles Hot Water Makers Mixing Units & Accessories Accessories

Strahman. Since Strahman full line catalogue Hoses Nozzles Hot Water Makers Mixing Units & Accessories Accessories Strahman Strahman full line catalogue Hoses Nozzles Hot Water Makers Mixing Units & Accessories Accessories Since 1964 675 The Parkway Peterborough, ON K9J 7K2 1-800-361-5361 705-743-5361 Catalogue Strahman

More information