DEMA SPRAY CLEAN MODELS: 241CDF & 241CDFT INSTALLATION INSTRUCTIONS
|
|
- Mary Hoover
- 5 years ago
- Views:
Transcription
1 1. PARTS A. Bottle holder and injector assembly. B. Spray gun (Model 40-8B). C. 4 mounting screws in envelope. 2. INSTALLATION Mount the bottle holder on wall using the 4 screws provided through the plates in the rear of the holder. The injector is threaded for " pipe. If connecting the inlet to a water hose, use a pipe to garden hose adapter (Dema part #34-1). Water temperature should not exceed 150 o F and pressure should not exceed 125 PSI. Connect spray gun to injector with high pressure garden hose. (Dema Part #44-3 is 25' of " hose). Total hose length must not exceed 50 ft. of " hose or 100 ft. of 5/8" ID hose. Run the hose through the bracket at center of lower plate before attaching to the injector outlet to keep the hose clear of bottles. The bottle holder will hold sizes up to 5 liters (1-1/3 gallons) capacity. Drop the plastic tubing with a ceramic weight and foot strainer into each bottle as it is being placed into the holder. 3. OPERATION With the water turned on and spray gun lever (See Fig. 1) squeezed to the full open position, the detergent or sanitizer will be drawn into the water stream. When the lever is released to rest in the latched position, no detergent will be drawn into the water stream, thus providing a clear rinse. To shut off the water, pull the short latch in and release. Use the ball valves (See Fig. 2) to select the chemical to be fed. The valve is in the closed position when the handle points downward, and is open when in a horizontal position. 4. ADJUSTMENT WARNING: USE CARE WHEN HANDLING HAZARDOUS CHEMICALS. MODEL: 241CDF Turn the small recessed screw on each injector knob (See Fig. 2) to set the injection rate. Adjust each injector separately, making sure the other injector ball valve is in the closed position during the adjustment procedure. Four turns counterclockwise provides the maximum. Table 1 shows the maximum proportions in ounces per gallon of water obtainable for various chemical viscosities. MODEL: 241CDFT Pressing a color coded metering tip into the barbed end of each ball valve will control the chemical injection (See Fig. 2). Table 2 shows the maximum injection rates using different metering tips for various chemical viscosities. TABLE 1 Viscosity (cps) Oz/Gal I-134 Pg. 1 of 5
2 TABLE 2 Injection Rates For Viscosities Shown Metering Tip Color 1 cps 75 cps 200 cps 500 cps Oz/Gal Ratio Oz/Gal Ratio Oz/Gal Ratio Oz/Gal Ratio Tan Orange Turquoise Pink Clear Brown Red White Green Blue Yellow Black Purple Gray No Tip Note: All injection rates are derived from a 40 psi flow rate using 25 ft. Of " ID hose. 5. SERVICING CAUTION: TURN OFF WATER SUPPLY BEFORE SERVICING. A. If unit fails to operate. 1. Check Fig. 1 for proper latch positions. Use only Dema spray gun Part #40-8B or 40-10B. 2. Is the hose too long? Do not exceed 50 ft. of " ID hose or 100 ft. of 5/8" ID hose. 3. Is the check valve clogged? Remove 4 knob screws to disassemble. Inspect and clean ball, spring and o-ring. CAUTION: WHEN SERVICING UNIT BE SURE THAT REPLACEMENT PARTS HAVE BEEN INSTALLED ACCORDING TO DRAWING. BE CERTAIN TO CHECK VALVE PARTS ARE IN PLACE. I-134 Pg. 2 of 5
3 RETURNS: WARRANTY: NO MERCHANDISE MAY BE RETURNED FOR CREDIT WITHOUT DEMA S WRITTEN PERMISSION. RETURN MERCHANDISE AUTHORIZATION NUMBER REQUIRED IN ADVANCE OF RETURN. DEMA products are warranted against defective material and workmanship under normal use and service for one year from the date of manufacture. This limited warranty does not apply to any products which have a normal life shorter than one year or failure and damage caused by chemicals, corrosion, improper voltage supply, physical abuse, or misapplication. Rubber and synthetic rubber parts such as o - rings, diaphragms, squeeze tubing and gaskets are considered expendable and are not covered under warranty. This warranty is extended only to the original buyer of DEMA products. If products are altered or repaired without prior approval of DEMA, this warranty will be void. Defective units or parts should be returned to the factory with transportation prepaid. If inspection shows them to be defective, they will be repaired or replaced without charge, F.O.B. factory. DEMA assumes no liability for damages. Return merchandise authorization number, to return units for repair or replacement, must be granted in advance of return. I-134 Pg. 3 of 5
4 OFF RINSE WASH FIGURE 1 METERING SCREW (MODEL 241CDF ONLY) METERING SCREW (MODEL 241CDF ONLY) OPEN CLOSED FIGURE 2 WATER INLET MOUNTING SCREW (4 REQD) SUPPLY TUBE CHEMICAL CONTAINER CERAMIC WEIGHT FOOT STRAINER FIGURE 3 I-134 Pg. 4 of 5
5 (MODEL 241CDFT) 24-24P (MODEL 241CDF) MP B ACCESSORIES PART NO MP P B DESCRIPTION SCREW 8-32 X 1 LG. (4-REQD) WATER NOZZLE FOOT STRAINER CHECK VALVE SPRING CHECK VALVE BALL CHECK VALVE O-RING METERING KNOB ASSEMBLY CHECK VALVE CORE METERING KNOB O-RING SPRAY GUN SET OF TWO MOUNTING SCREWS W/ SPACERS PIPE NIPPLE FITTING BALL VALVE (POLYPROPYLENE) PART NO DESCRIPTION BALL VALVE (OPTIONAL BRASS) BOTTLE HOLDER W/ MOUNTING SCREWS (4 REQ'D) SCREW 1/4-20 X 1/2 LG (2-REQD) CERAMIC WEIGHT 18" OF 7/32" I.D. VINYL TUBING METERING TIP (SPECIFY COLOR) METERING SCREW W/ O-RING ACCESSORIES HOSE INLET ADAPTER W/ WASHER 25 FEET OF 1/2" HIGH PRESSURE HOSE 6 FEET OF 1/2" HIGH PRESSURE HOSE GARDEN HOSE RUBBER WASHER I-134 Pg. 5 of 5
DEMA SPRAY CLEAN MODELS: 244CDF & 244CDFT INSTALLATION INSTRUCTIONS
I. PARTS: A. Injector. B. Spray gun. C. Mounting screws and washers. D. Vinyl supply tubing, foot strainer & ceramic weight. E. Metering tip (specified size, model 244CDFT only). II. INSTALLATION: (See
More informationDEMA SPRAY CLEAN MODELS: 244BC, 244BCE, 244BCP & 244BCT INSTALLATION INSTRUCTIONS
I. PARTS: A. Injector. B. Spray gun. C. Mounting screws and washers. D. Vinyl supply tubing, foot strainer & ceramic weight. E. Metering tip (specified size, model 244BCT only). II. INSTALLATION: (See
More informationDEMA MODEL 603T-WI INSTALLATION INSTRUCTIONS
DEMA MODEL 603T-WI I. PARTS: A. Select-O-Matic Assembly B. 2 Pcs. Foot Strainers & 1/4" ID Tubing C. 4 Pcs. Mounting Screws & Anchors D. 1 Pc. 100-15K Metering Tip Kit (603T Only) E. 1 Pc. Backflow Preventer
More informationDEMA MODEL 606T-WI INSTALLATION INSTRUCTIONS
DEMA MODEL 606T-WI INSTALLATION INSTRUCTIONS I. PARTS: A. Select-O-Spray Assembly B. 2 Pcs. Foot Strainers & 1/4" ID Tubing C. 4 Pcs. Mounting Screws & Anchors D. 1 Pc. 100-15K Metering Tip Kit E. 1 Pc.
More informationDEMA MODEL 604T-WI INSTALLATION INSTRUCTIONS
DEMA MODEL 604T-WI I. PARTS: A. Select-O-Matic Assembly B. 2 Pcs. Foot Strainers & 1/4" ID Tubing C. 4 Pcs. Mounting Screws & Anchors D. 1 Pc. 100-15K Metering Tip Kit (604T Only) E.1 Pc. Backflow Preventer
More informationTABLE 1. * SPECIFY S Stainless Steel Knob Part No S or Part No ST (for tips) for pressure exceeding 700 PSI.
1. PARTS A. Injector B. Ceramic Weight. C. Plastic tubing 8' long with foot strainer. 2. INSTALLATION The injector may be installed in any position in the water line with the arrow in the direction of
More informationDEMA MODELS P203CTC.PI.1,.2,.3 INSTALLATION INSTRUCTIONS
I. PARTS: A. 1 pc. Cyclone Portable Injector B. 1 pc. Foot Strainer & 1/4" I.D. Tubing. C. 1 pc. Ceramic Weight. D. 1 pc. Instruction Sheet D. 2 pc. 3 hose w/ female x female GHT fittings on both ends
More informationDEMA MODELS 606T INSTALLATION INSTRUCTIONS
I. PARTS: A. Select-O-Spray Assembly B. 2 Pcs. Foot Strainers & 1/4" ID Tubing C. 4 Pcs. Mounting Screws & Anchors D. 1 Pc. 100-15K Metering Tip Kit TABLE 1 Hose I.D. 3/8" 1/2" 5/8" Max. Length 15 ft.
More informationDEMA Model 294D Spray Foam INSTALLATION INSTRUCTIONS
1. PARTS A. Foamer Assembly B. Plastic chemical supply tubing w/ foot valve and ceramic weight C. Metering tip kit D. Outlet hose 25 long (optional accessory) E. Shut-off valve (optional accessory) 2.
More informationDEMA SPRAY CLEAN DISPENSERS MODEL 605T INSTALLATION INSTRUCTION
The 605T Spray Clean Dispenser is used in any application where a chemical product must be sprayed or foamed without the use of compressed air or a high pressure pump. City water pressure and optional
More informationDEMA SPRAY STATION II MODEL 606T-2 INSTALLATION INSTRUCTIONS
The 0T-2 Spray Station II Dispensers are used in any application where a chemical product must be sprayed or foamed without the use of compressed air or a high pressure pump. City water pressure and optional
More informationDEMA 652 DUO-FEED INSTALLATION INSTRUCTIONS
I. PARTS: A. Dispenser assembly B. 1 pc. ½ in I.D. X 6 ft. vinyl outlet tubing C. 1 pc. 9/16 in. I.D. X 6 ft. vinyl outlet tubing. D. 2 pc. 3/8 in. O.D. X 8 ft. vinyl supply tubing, foot valve & ceramic
More informationSpray & Foam Dispenser Item #
Spray & Foam Dispenser Item #92364-00 Spray & Foam Dispenser Item #92364 Table of Contents Section Page 1. Spray & Foam Dispenser Description... 3 2. Spray & Foam Dispenser Installation... 4 3. Chemical
More informationDEMA RAPID FIRE MODELS 6300, , , , 6310, 6300H 6300E, 6300EH, &6310E INSTRUCTION SHEET
I-1002 Pg. 1 of 12 PURPOSE: The RAPID FIRE is a spray system designed with a single knob to control OFF, RINSE and up to two chemicals using a single chemically resistant plastic injector. There is full
More informationSpray Clean 606T-2 Installation Instruction
Spray Clean 606T-2 Installation Instruction Overview The 606T-2 unit is designed to be used as a spray or foam unit where up to two chemicals can be attached to the unit along with a clean water rinse.
More informationDEMA MODEL 692T FOAM STATION I INSTALLATION INSTRUCTION
1. PARTS CHECKLIST: ITEM DESCRIPTION QTY. A. Foam Station Assembly 1 B. #10 Screw & Anchor Kit Set (Total: 4 Screws & 4 Anchors) 1 C. Ceramic Weight 1 D. ¼ ID Tubing & Foot Valve Assembly 1 E. Metering
More informationDEMA 651AG SINGLE-FEED INSTALLATION INSTRUCTIONS
I. PARTS: A. Dispenser assembly B. 1 pc. 9/16 in. I.D. X 6 ft. vinyl outlet tubing (4 GPM proportioner only). C. 1 pc. 3/8 in. O.D. X 8 ft. vinyl supply tubing, foot valve & ceramic weight. D. 4 pc. #10
More informationINSTALLATION INSTRUCTIONS DEMA BLEND CENTER MODEL B-GAP, T-GAP
1. PARTS: ITEM DESCRIPTION QTY. A. Blend Center Assembly 1 B. ¼ ID X 8 Long Vinyl Supply Tubing & Foot Valve Assembly 1 C. Ceramic Weight 1 D. ½ ID X 6 Long Vinyl Outlet Tubing (For 4 GPM Station Only)
More informationWATCH GUARD 440 SERIES FLOAT VALVES INSTALLATION INSTRUCTIONS MODELS: T, TX, T, BT,
WATCH GUARD 440 SERIES FLOAT VALVES INSTALLATION INSTRUCTIONS MODELS: 440-22T, 440-22TX, 440-23T, 440-23BT, 440-24 Overview The Watch Guard 440 Series of float valves fills and maintains fluids in reservoirs.
More informationDEMA MODEL 693T FOAM STATION II INSTALLATION INSTRUCTION
1. PARTS CHECKLIST: 2. INSTALLATION: DEMA MODEL 93T FOAM STATION II ITEM DESCRIPTION QTY. A. Foam Station Assembly 1 B. ¼ ID Tubing & Foot Strainer 1 C. 3/ ID Tubing & Foot Strainer 1 D. Ceramic Weight
More informationDEMA BLEND CENTER MODELS: 637GAP-1 and 637GAP-4 INSTALLATION INSTRUCTIONS
1. PARTS CHECKLIST: ITEM DESCRIPTION QTY. A. Blend Center Assembly 1 B. ¼ ID X 8 Long Vinyl Supply Tubing & Foot Valve Assembly 4 C. Ceramic Weight 1 D. ½ ID X 6 Long Vinyl Outlet Tubing (For 1 GPM Station
More informationDEMA SINGLE-FEED MODEL: 651GAP& 651GAP-1 INSTALLATION INSTRUCTIONS
The Model 65GAP is designed to dispense one product into a kitchen sink with the turn of a ball valve. I. PARTS: ITEM DESCRIPTION QTY. A Dispenser Assembly B ½ ID X 6 Long Vinyl Outlet Tubing (For 4 GPM
More informationDEMA Pro-Fill I Sink Dispenser
DEMA Pro-Fill I Sink Dispenser MODELS PF651GAP, PF651AG, PF651GAP-1M, & PF651AG-1M Overview The PRO-FILL I Sink Dispenser mixes water with a cleaning chemical and dispenses the solution into holding containers
More informationDEMA Pro-Fill II Sink Dispenser
DEMA Pro-Fill II Sink Dispenser MODELS PF652GAP, PF652AG, PF652GAP-2M, & PF652AG-2M Overview The PRO-FILL II Sink Dispenser mixes water with cleaning chemicals and dispenses these solutions. This unit
More informationThe 606T-2 unit is designed to be used as a spray or foam unit where up to two chemicals can be attached to the unit along with a clean water rinse.
Overview The 606T-2 unit is designed to be used as a spray or foam unit where up to two chemicals can be attached to the unit along with a clean water rinse. The unit features three ball valves for control
More informationDEMA BLEND CENTER MODELS: 633GAP INSTALLATION INSTRUCTIONS
The 633GAP Series Blend Center modular design lets you easily couple together any number of stations to create a system that meets your specific needs. Mix and match both high and low flow units for filling
More informationSINGLE-STAGE INJECTOR MODELS 200-3C, 200C, 201C, 202C, 203C, 204C, 206C, 208C
D E M A SINGLE-STAGE MODELS SINGLE-STAGE MODELS 1. PARTS A. Injector B. Backup washer (Models 204C & smaller). C. Ceramic Weight. D. Tubing 8 long w/ foot strainer. E. Three brass nozzle bushings Metering
More informationDEMA MODEL 582 FOAM STATION III INSTRUCTION SHEET
I-866 Pg. 1 of 6 1. PURPOSE: The purpose of the DEMA 582 Foam Station III is to allow a remotely located chemical product source (i.e. a tote) to supply up to three DEMA 582 foam stations without the need
More informationDEMA BLEND CENTER MODEL 681GAP-3 INSTALLATION INSTRUCTIONS
1. PARTS CHECKLIST: A. Blend Center Assembly B. Vinyl Supply Tubing with Foot Valve Assembly C. Ceramic Weight D. Vinyl Outlet Tubing E. Screw and Anchor Kit F. Label Card G. Metering Tip Kit 2. INSTALLATION:
More informationDEMA DILUTION-AT-HAND EXTREME 800 Series Chemical Dispensers
DEMA DILUTION-AT-HAND EXTREME 800 Series Chemical Dispensers Overview The DILUTION-AT-HAND EXTREME chemical dispenser series combines the proven technology of the DEMA DILUTION-AT-HAND with a new look
More informationPeroxiDraw Dispenser
The PeroxiDraw Dispensing System is a locking dispensing system that allows the user to dispense Green Earth Peroxide Cleaner for up to six different dilutions and applications safely and effectively.
More informationTABLE 1-1 GPM FLOW RATE PROPORTIONER, 1/4 I.D. TUBING Injection Rates For Viscosities Shown Metering Tip Color
Blend Safe II Dispensing System is a modular, locking dispensing system that allows user to dispense chemicals safely, control dispenser inventory and has the flexibility in the field to meet changing
More informationALWAYS DISCONNECT DISPENSER FROM WATER SOURCE WHEN DISPENSER IS NOT IN USE.
1060GAPRF With dilution selector 1060GAP OVERVIEW DEMA S MPD is a multiple product and dilution dispenser designed for use with SafeLink closed loop inserts. With its innovative patent pending QuickDock
More informationD EMA TWO-STAGE INJECTOR MODELS 233, 234A, 236A, 236-8, 238, AND 2312 INSTALLATION INSTRUCTIONS FIGURE 3 FIGURE 2
1. PARTS A. Injector B. Three brass nozzle bushings. C. Plastic Tubing 8 long with foot strainer. D. Ceramic Weight 2. INSTALLATION A. Selecting the nozzle bushing: Refer to Section 4 APPLICATIONS and
More informationDEMA MIXRITE PROPORTIONING PUMP MODELS 574 & CL & 575CL FOR CORROSIVE LIQUID CHEMICALS INSTALLATION INSTRUCTION.
10% MixRite Pump I-871 Page 1 MODEL # INDUCTION RANGE%* TECHNICAL DATA TABLE Ability to turn off INDUCTION the chemical flow RANGE RATIO* while water is running OPERATING TEMPERATURE 574 3% to 10% 33/1
More information665 Series Dispenser. Metering tip kit
665 Series Dispenser Metering tip kit Box Contains Mounting hardware, template & key set Instruction sheet 665 series dispenser 4 SafeLink cap assemblies OR Bulk tubing, 4 ceramic weights and foot valves
More information900-WC OWNER S MANUAL THIS UNIT DOES NOT INCLUDE AWATER BACKFLOW PREVENTER, CHECK LOCAL PLUMBING CODES FOR PROPER INSTALLATION. Pg.
900-WC OWNER S MANUAL THIS UNIT DOES NOT INCLUDE AWATER BACKFLOW PREVENTER, CHECK LOCAL PLUMBING CODES FOR PROPER INSTALLATION. Pg. 1 of 6 900-WC FRONT VIEW - CONTROL BOX COVER REMOVED Pg. 2 of 6 04/04/07
More informationCerto Chemical Dilution System
Certo Chemical Dilution System Overview The Certo Chemical Dilution System accurately dilutes chemical concentrates with water and dispenses the diluted mixture at either a high flow rate to fill buckets
More informationDEMA 258BD-200C and 258BT-200C DRAIN MASTER Jr. INSTALLATION INSTRUCTION SHEET
I-736 Pg. 1 of 10 Summary The 258BD-200C Drain Master is designed to feed chemicals into drains and grease traps to break up grease, detergent buildup and eliminate odors. The 258BT-200C Trash Master is
More information1-BUTTON DISPENSER INSTALLATION INSTRUCTIONS
R 1-BUTTON DISPENSER INSTALLATION INSTRUCTIONS Model: #91162-00 The Green Earth II 1-button dispenser allows you to dispense one product for mop buckets and automatic scrubbers. The modular design lets
More informationItems # and #
D I S P E N S E R T E C H N I C A L M A N U A L Items #91160-00 and #91161-00 1. System Description... 1 2. Equipment Included with the Green Earth II XL System... 2 3. Components Included with Green Earth
More informationDEMA 951 FLUSH MANIFOLD WITH 24V DC VALVE INSTALLATION INSTRUCTIONS
System Overview The DEMA 951 Flush Manifold is designed for long reliable use with simplicity and adaptability in mind. The 951 Flush Manifold can be added to the DEMA Atlas 844P, and DEMA Laundry Master
More informationALWAYS FOLLOW ALL SAFETY PRECAUTIONS AS DIRECTED BY THE CLEANING CHEMICAL LABEL
Overview (Model # s 4-252- _ ) E2B2 Dispenser The E2B2 dispenser dilutes a concentrated EnvirOx product with water and dispenses the mixture with either a high flow rate (for filling buckets, scrubbers,
More informationDART Ware Wash Speed Control
DART Ware Wash Speed Control Overview Simple and value best describe the DEMA Dart. The system is extremely easy to setup and program. The Dart is suitable to deliver detergent, rinse aid and sanitizer
More informationI Button Chemical Dispenser. Overview. Installation Instructions
4 Button Chemical Dispenser Overview The 4 Button Chemical Dispenser makes users more efficient, filling bottles and buckets with ease and quickness. Package Contains: Mounting Template Mounting hardware
More information23200 Navigator Dilution Control System 4 Button Model (NAV 4)
23200 Navigator Dilution Control System 4 Button Model (NAV 4) Overview The NAV 4 Chemical Dilution Control System accurately dilutes cleaning chemicals from cleaning concentrate product. It is a closed
More informationCaution! Pg. 1 of 5 I-932
Pg. 1 of 5 PFN26-SS BA25 QF1438 QFT38 CT38-15 DFP6 AW14 AW316 AHB14 AHB316 BA25 AP25 TANK 10 FOG-MAST DPN-10 DPG-10 DP-10 HBEL1238 PL10-B HBSS1212 W10 SSAXLE12 AXC12 SHW3 HB1438 STR14 SIDE VIEW Pg. 2 of
More informationDEMA 259B DRAIN MASTER Jr. INSTALLATION INSTRUCTION SHEET
I-707 Pg. 1 of 7 Summary The 259B Drain Master is designed to feed chemicals into drains and grease traps to break up grease, detergent build up and eliminate odors. All programming is done by use of a
More informationDEMA SINGLE PRODUCT LAUNDRY MASTER TM W/BLEACH OPTION INSTALLATION INSTRUCTIONS LIQUID MODEL 840 (B)(S)
LIQUID MODEL 840 (B)(S) DEMA Engineering Company 10020 Big Bend Blvd. St. Louis, MO 63122 (800) 325-3362 or (314) 966-3533 www.demaeng.com Rev B-34251 2/27/09 Page 1 of 11 LIQUID MODEL 840 (B)(S) Model
More informationDEMAMaster TM DM-811 Series Installation Manual
R TM MADE IN USA I-807 Page 1 of 6 System Overview The DEMAMaster series is designed for long reliable use with simplicity in mind for both the installer and user. The DEMAMaster dispenses using the reliable
More informationSAFETY INFORMATION & INSTRUCTION MANUAL
SAFETY INFORMATION & INSTRUCTION MANUAL Please read, understand, and follow all safety information contained in these instructions prior to the use of this device. Retain these instructions for future
More informationDEMA S.U.D.S Jr. SINGLE PRODUCT LAUNDRY 581K(I)(S)(V)
DEMA S.U.D.S Jr. SINGLE PRODUCT LAUNDRY 581K(I)(S)(V) Overview The DEMA 581K SUDS Jr. Single Product Solid Laundry system has been updated and redesigned. It uses the proven DEMA Viking Bowl and removes
More information910 BHF OWNER S MANUAL. Pg. 1 of 9
OWNER S MANUAL Pg. 1 of 9 DFP6 TANK 10 HHPB1214 QF14P QFSEL14 QF1238 QFSEL38 PL10-CH QFA3838 DPN-10 DPG-10 DP-10 HBEL1238 H38B W10 SSAXLE12 AXC12 SHW3 FV2 Pg. 2 of 9 PSG-BRKT ICS-12V BC23-12V-A BC23-12V
More informationIntended Use: Explanation of Signal Word Consequences
SAFETY INFORMATION & INSTRUCTION MANUAL Please read, understand, and follow all safety information contained in these instructions prior to the use of this device. Retain these instructions for future
More informationTrident Laundry Chemical Delivery System
Trident Laundry Chemical Delivery System Installation and Setup Guide The DEMA Trident is a complete laundry chemical delivery system for commercial laundry applications. The Trident features Bluetooth
More informationTrapper Drain Maintenance/Odor Control Chemical Dispensing
Trapper Drain Maintenance/Odor Control Chemical Dispensing Overview The DEMA Trapper is a digital chemical dispenser that is designed to deliver chemicals for both drain and odor control. The system will
More informationALLSTAR DILUTION CONTROL SYSTEM MODEL 639AG-4-1ABC
MODEL 639AG-4-1ABC 1. PARTS: A. Blend Center assembly B. 5 pc. 1/4 ID x 8 ft. long vinyl supply tubing, with foot valve & ceramic weight C. 1 pc. 1/2 ID x 6 ft. long vinyl outlet tubing D. 2 pc. #8 pan
More informationPRO IV LIQUID DETERGENT & LIQUID RINSE DISPENSER INSTALLATION INSTRUCTIONS REVISION #5
PRO IV LIQUID DETERGENT & LIQUID RINSE DISPENSER INSTALLATION INSTRUCTIONS REVISION #5 STEP #1. MOUNTING 1. Choose a location where the unit is visible to the machine operator. 2. Locate the unit out of
More informationDEMA Nitro for Europe Ware Wash Chemical Dispensing
DEMA Nitro for Europe Ware Wash Chemical Dispensing Overview The DEMA Nitro is a digital ware wash dispenser designed to dispense cleaning chemicals when signals are received from ware wash and dish machines.
More informationDEMA SQUIRT DRAIN UNIT
DEMA SQUIRT DRAIN UNIT Overview The Squirt is a chemical dispenser with a programmable timer designed primarily for dispensing chemicals into drains. Its most clear intended use is for drain applications
More informationDrain Chief Plus Drain Maintenance/Odor Control Chemical Dispensing
Drain Chief Plus Drain Maintenance/Odor Control Chemical Dispensing Overview The VIKING Drain Chief Plus is a digital chemical dispenser that is designed to deliver chemicals for both drain and odor control.
More informationDEMA Dispensing. Overview. Warnings. I-1205 Rev. B a digital ware. The DEMA. Nitro Plus is. tee.
DEMA Nitro Plus Ware Wash Chemical Dispensing Overview The DEMA Nitro Plus is a digital ware wash dispenser designed to dispense cleaning chemicals into ware wash and dish machines. The unit is triggered
More informationCHEMTROL TRIPLE SPACE SAVER CLEANING STATION #U16242 INSTALLATION INSTRUCTIONS
CHEMTROL TRIPLE SPACE SAVER CLEANING STATION #U16242 INSTALLATION INSTRUCTIONS 1) PARTS INCLUDED: A. Cleaning Station. B. 3 ea. 3/8" OD x 8' long vinyl chemical supply tubing w/ cap adapter C. 1 ea. 3/4"
More informationTable of Contents. Introduction. KP1H Components... 2 Installation and Assembly
I N S T R U C T I O N M A N U A L Table of Contents Introduction Theory of Operation... 1 Specifications... 1 KP1H Components... 2 Installation and Assembly Single Proportioner Installation... 4 KP1H Complete
More informationBIOACTIVE SOLUTIONS AC DRAIN STATION
BIOACTIVE SOLUTIONS AC DRAIN STATION 98488-00 Overview The BioActive Solutions Drain Station is a chemical dispenser with a programmable timer designed primarily for dispensing chemicals into drains. Its
More informationDIRECT-DRIVE PRESSURE WASHERS
DIRECT-DRIVE PRESSURE WASHERS PJG SERIES PRESSURE WASHER MANUFACTURED BY: PJG-2002B PJG-2502-6.5B PJG-3002B PJG-4002B INTRODUCTION Thank you for purchasing a Mancorp Pressure Washer. This manual covers
More informationCHEMICALS ONE-WASH ( ) fax (662) HYDROMINDERS HYDROMINDER TIP SELECTOR HYDROMINDERS
16 HYDROMINDERS HY511 HY572 HY564 HYDROMINDERS VOLUME MOUNTING BRACKET SIPHON HY506 Low Y N HY507 Low N N HY511 Low Y Y () HY5111* Low Y Y 4-5.6 HY525 Medium Y N HY530 Medium Y Y HY561 Medium Y N HY562
More informationSAM SPARTAN ACCURATE MEASURE DISPENSING SYSTEM INSTALLATION INSTRUCTIONS MODEL 681-3SAM 1. PARTS: A. SAM
SAM SPARTAN ACCURATE MEASURE DISPENSING SYSTEM INSTALLATION INSTRUCTIONS MODEL 681-3SAM 1. PARTS: A. SAM 3-station blend center. B. 3 pcs. 3/8" ID x 8 ft. long vinyl product supply tubing with foot valve.
More informationWA 2719 ( 604 ) ( 604 ) , H.E.R.O.
a division of Middlefield Bancorp Limited 2719 Lake City Way, Burnaby, B.C., Canada Phone: ( 604 ) 420-6543 Fax: ( 604 ) 420-8725 Toll Free: 1-800-494-4376 E-mail: sales@hero.ca Website: www.hero.ca U.S.
More informationPROMAX INSTRUCTION MANUAL
PROMAX INSTRUCTION MANUAL One Hand Activation Single Product [1 gpm (4l/m) models only] One Hand Activation 4 Product [1 gpm (4l/m) models only] Button Activation Single Product [1, 4, 8 gpm (4, 16, 30
More informationDEMA 257C / 257CV PRO BATTERY DRAIN CHIEF INSTALLATION & OPERATING INSTRUCTIONS
DEMA 257C / 257CV PRO BATTERY DRAIN CHIEF INSTALLATION & OPERATING INSTRUCTIONS Note This dispenser is designed for injecting drain and grease trap products in locations where an outlet isn t available.
More informationBLAST-TEC PRO - ROTATING TURBO NOZZLES
BLAST-TEC PRO - ROTATING TURBO NOZZLES BLAST-TEC PRO ROTATING TURBO NOZZLE - 1000 PSI The Blast-Tec Pro was designed specifically for high-pressure, high-impact vehicle wash applications including wheel
More informationFRS Dispenser (Foam-Rinse-Sanitize) Model # ol Systems. Dilution Control OPERATION SERVICE PARTS CARE
Dilution Control ol Systems FRS Dispenser (Foam-Rinse-Sanitize) Model #421330 OPERATION SERVICE PARTS CARE Revised 11/03 This dispesner is used with the Travel Station Model #421250 or the Sanitation Station
More informationTable of Contents WARRANTY
a division of Middlefield Bancorp Limited 2719 Lake City Way, Burnaby, B.C., Canada Phone: ( 604 ) 420-6543 Fax: ( 604 ) 420-8725 Toll Free: 1-800-494-4376 E-mail: sales@hero.ca Website: //www.hero.ca
More informationMulti-Input Water/Methanol Injection Harness
Multi-Input Water/Methanol Injection Harness 30-3324 WARNING: Improper installation and/or adjustment of this product can result in major engine/vehicle damage! Use of this injection system requires proper
More informationICS Integrated Cleaning System. Rechargeable Battery
ICS 8900 Integrated Cleaning System Rechargeable Battery THANK YOU FOR CHOOSING OUR PRODUCTS Hydro Systems manufactures quality chemical proportioners. Please use this equipment carefully and observe all
More informationTools Needed for Mounting Cleá Filling Station
ALWAYS OBSERVE PRODUCT SAFETY AND HANDLING INSTRUCTIONS. ALWAYS DIRECT DISCHARGE AWAY FROM YOU or other persons. ALWAYS DISPENSE CLEANERS AND CHEMICALS AS DIRECTED ON THE LABEL. ALWAYS DISPENSE INTO APPROVED
More informationSPLASH-N-DASH. Coleman Hanna Carwash Systems. World Class Manufacturing in Car Wash Equipment. Splash-N-Dash Installation/Operation Manual
Manual SPLASH-N-DASH Page 1 of 25 Rev. 2 6/9/10 Manual Table of Contents INSTALLATION PROCEDURES...3 SEQUENCE OF OPERATION...14 TROUBLESHOOTING GUIDE...17 TURTLE WAX HYPER-CONCENTRATE CHEMICAL USAGE...19
More informationBLACK SHADOW SERIES DISPENSER. Tools Needed for Mounting SCS Dispenser Hammer Drill with 1/4, 1/8, 9/32 and 5/32 Diameter Bits Pliers
SCS BLACK SHADOW SERIES.. DISPENSER ALWAYS OBSERVE PRODUCT SAFETY AND HANDLING INSTRUCTIONS. ALWAYS DIRECT DISCHARGE AWAY FROM YOU or other persons. ALWAYS DISPENSE CLEANERS AND CHEMICALS AS DIRECTED ON
More informationINSTRUCTIONS. Fc. -1,<" SERIES ST-261 REGULATING UNLOADER VALVE
INSTRUCTIONS Fc. -1,
More informationCM-2800-OMVC & CM-2804/3304-OMHC PARTS LIST
8650 Enterprise Drive, Peosta IA 52068 319-556-7484 / Fax 319-556-1235 CM-2800-OMVC & CM-2804/3304-OMHC PARTS LIST Vanguard Engine Oil Grade: Vanguard Engine Oil Capacity: Honda Engine Oil Grade: Honda
More informationPARTS LIST FOR CV MBC. Engine Oil Grade: Above 40 F=SAE 30 Below 40 F=SAE10W-30 Engine Oil Capacity: Pump Oil Capacity:
The by Mi-T-M PARTS LIST FOR CV-2100-0MBC Engine Oil Grade: Above 40 F=SAE 30 Below 40 F=SAE10W-30 Engine Oil Capacity: 20 oz. Pump Oil Grade: Mi-T-M Pump Oil #AW-4085-0016 Pump Oil Capacity: 4.5 oz. Nozzle
More informationDilution Control Systems. 2-Button Station Model OPERATION SERVICE PARTS CARE
Dilution Control Systems 2-Button Station Model 421090 OPERATION SERVICE PARTS CARE Note: 2-Button Station comes in two separate cartons identified as Carton 1 and Carton 2. Revised 1/02 2-Button Station
More information1600 PSI ELECTRIC PRESSURE WASHER
MODEL NO.: XE03 SKU: 39-8508-6 1600 PSI ELECTRIC PRESSURE WASHER Owner s Manual QUESTIONS, PROBLEMS, MISSING PARTS? Before returning to your retailer, visit our web site or call our customer service at
More informationCompact Cleaning System
Series 9900 Compact Cleaning System THANK YOU FOR CHOOSING OUR PRODUCTS Please use this equipment carefully and observe all warnings and cautions. WEAR ALWAYS protective clothing and eyewear when working
More informationPARTS LIST FOR CV MBC. Engine Oil Grade: Above 40 F=SAE 30 Below 40 F=SAE10W-30 Engine Oil Capacity: Pump Oil Capacity:
The by Mi-T-M PARTS LIST FOR CV-2300-0MBC Engine Oil Grade: Above 40 F=SAE 30 Below 40 F=SAE10W-30 Engine Oil Capacity: 20 oz. Pump Oil Grade: 75W90 Synthetic Pump Oil Capacity: 2.3 oz. Nozzle Size: 1.15
More informationTRIPLE FOAM INSTALLATION MANUAL Part # FOAMSTRMRTPL00X
TRIPLE FOAM INSTALLATION MANUAL Part # FOAMSTRMRTPL00X TABLE OF CONTENTS Equipment Specifications Page: 1 Suggested Tools and Installation Materials Page: 2 Installation Instructions Page: 2 Initial Start-Up
More informationFoam Output 50 gal/min (190 ltr/min) 65 gal/min (246 ltr/min) Foaming Distance 30 feet (9 meters) 35 feet (10 meters) alcohols, ketones.
INSTRUCTION MANUAL INTRODUCTION Foam cleaning is recognized as an effective method for removing oil and heavy soils from all types of surfaces. It is used for cleaning throughout the food processing, dairy,
More informationHeavy Duty Sprayer Owners Manual Model MS-O
Heavy Duty Sprayer Owners Manual Model MS-O Table of Contents Warranty 4 Warning 5 Assembly and Preparation 6 Operation 7 Cleaning and Storage 7 Standard Spray Gun & Parts List 8 Trigger Style Spray Gun
More informationTable of Contents WARRANTY
H.E.R.O. Industries a division of Middlefield Bancorp Limited 2719 Lake City Way, Burnaby, B.C., Canada Phone: ( 604 ) 420-6543 Fax: ( 604 ) 420-8725 Toll Free: 1-800-494-4376 E-mail: sales@hero.ca Website:
More informationInstallation & Operator s Manual
Installation & Operator s Manual LS5 Liquid Spray System 2 x 105 Gallon Tanks Installation Instructions 1. Position pump enclosure bracket (#3028485) 4 from rear gusset on driver side of hopper spreader,
More informationSOLUTION STATION Instruction Manual
SOLUTION STATION Instruction Manual WAXIE Sanitary Supply 9353 WAXIE Way San Diego, CA 92123 Phone: 800.995.4466 www.waxie.com TABLE OF CONTENTS Unpacking Instructions Disclaimer..... Warranty... Introduction...
More information3.1 DISPENSER BLACK SHADOW SERIES. Tools Needed for Mounting SCS Dispenser Hammer
SCS 2 BLACK SHADOW SERIES 3.1 DISPENSER ALWAYS OBSERVE PRODUCT SAFETY AND HANDLING INSTRUCTIONS. ALWAYS DIRECT DISCHARGE AWAY FROM YOU or other persons. ALWAYS DISPENSE CLEANERS AND CHEMICALS AS DIRECTED
More informationMACHINES / RECLAIMS WITH DUST BAG
WARNING SET-UP INSTRUCTIONS MACHINES / RECLAIMS WITH DUST BAG *** READ BEFORE OPERATING EQUIPMENT *** 1. Remove plastic from machine. 2. Remove lag bolts from each of the four legs, then remove machine
More informationOwner's Manual. Model: SK-61-4R ( ) (60 Gallon Skid Sprayer w/2.5 H.P. Engine, 4-Roller Pump, Deluxe Handgun) Technical Specifications
Owner's Manual Model: SK--R (0) (0 Gallon Skid Sprayer w/. H.P. Engine, -Roller Pump, Deluxe Handgun) Technical Specifications. H.P. Recoil Start Engine Roller Pump - G.P.M. Pressure Relief Valve Pressure
More information123 Industrial Loop Road Paynesville, MN Phone:
123 Industrial Loop Road Paynesville, MN 56362 Phone: 1-800-864-1649 www.master-mfg.com Note: Do not return product to the distributor/dealer for warranty work. Call Master Manufacturing at (800) 864-1649
More informationReference Manual FM-200 Series
Flush Manifold A/P FOR LIQUID LAUNDRY SUPPLY SYSTEMS Reference Manual FM-200 Series Copyright 2004 Nova Controls, Inc. P/N 20-07941-00 Rev. C i P/N 20-07941-00 Rev. C ii P/N 20-07941-00 Rev. C 1 Description
More information10 Ch Peak & Hold Injector Driver PN
Installation Instructions 10 Ch Peak & Hold Injector Driver PN 30-2710 WARNING: installation is not for the electrically challenged! Use this product with extreme caution! If you are uncomfortable with
More informationLubricator Gun: 10,000 psi (700 bar) Maximum Delivery Pressure when disconnected from Dispenser
INSTRUCTIONS-PARTS LIST 30 455 INSTRUCTIONS This manual contains important warnings and information. READ AND KEEP FOR REFERENCE. Rev. C Supercedes B Hand-Operated Portable Grease Dispenser Buckshot Luber
More informationInternal MAP Water/Methanol Injection Controller ,
Internal MAP Water/Methanol Injection Controller 30-3304, 30-3306 WARNING: Improper installation and/or adjustment of this product can result in major engine/vehicle damage! Use of this injection system
More information