FOR COMPLETE INFORMATION AND DETAILS ON ALL BULLET/BLAST PROTECTION PRODUCTS WE OFFER PLEASE VISIT OR
|
|
- Kelly Simon
- 5 years ago
- Views:
Transcription
1 /ARM BuyLine FAX BLLET RESISTANT DOORS AND WINDOWS BLLET / BLAST RESISTANT FIBERGLASS COMPOSITE PANELS BLAST RESISTANT DOORS AND WINDOWS ARMORTEX PRODCTS CARRY 5 MILLION DOLLARS OF PRODCT LIABILITY INSRANCE FOR COMPLETE INFORMATION AND DETAILS ON ALL BLLET/BLAST PROTECTION PRODCTS WE OFFER PLEASE VISIT OR
2 ARMORTEX BLLET / BLAST PROTECTION FIBERGLASS COMPOSITE PANELS Quality Control Through Our Own Manufacturing L Listed Products L Levels 1-8 Available Same Day Shipment Factory Technical Support Armortex, the manufacturer of Armortex composite fiberglass panels, manufactures L Listed bullet resistant products. This composite material is made using woven roving ballistic grade fiber. We weave the cloth in-house where it is mechanically injected with a thermoset resin and placed in a hydraulic hot press, then pressed into flat rigid sheets available in 3 or 4 widths and lengths of 8 or lengths are available on request. By using a ballistic grade fiber in our cloth, we can maximize our ballistic performances by consistently achieving a uniform resin-to-fiber ratio. This allows the proper de-lamination to encapture projectiles. Excessive resin left behind in the manufacutring process results in a thicker, less safe product. By using the correct amount of pressure and heat during our curing process, excessive resin is eliminated from Armortex Bullet Resistant Composite Fiberglass, always resulting in a product that provides the maximum amount of protection. Our Armortex Bullet Resistant Composite Panels are approved by the. S. Marshal Service, the General Services Administration, and complies with NIJ standards. NEW FROM ARMORTEX FRAG-STOP COMPOSITE PANELS For Protection Against Blast Shrapnel & Simultaneous, Multiple Handgun Attack The logical upgrade from L 3 NAME FS-1 FS-2 FS-3 THICKNESS PSF.30 CAL FSP 1786 FPS 0.77 ARIAL DENSITY 2.90 PSF 7.80 PSF PROJECTILE.22 CAL FSP.50 CAL FSP BALLISTIC LIMIT 1690 FPS 1723 FPS ARMORTEX FAX FS-3, one of Armortex s Frag-Stop Composites, is specifically designed, manufactured and certified to give a measured protection against shrapnel damage from blasts, as well as affording protection against simultaneous, multiple handgun attacks. Certified by the Southwest Research Institute using MIL-STD-622F (V-50) and MIL-P-46593A (Fragment Simulating Projectiles), this new product is the logical upgrade that exceeds L 3 by 70%.
3 FIBERGLASS COMPOSITE BALLISTIC CHARTS -.L. NDERWRITERS LABORATORY ARMOR TEX PRODCT NOMINAL WEIGHT LBS/SQ. FT. (KGS./SQ. MTR.) NOMINAL THICKNESS INCHES (mm) LEVEL WEAPON AMMNITION VELOCITY FT./SEC. O. F (10) 3/16 (5) L1 (MPSA) 9 mm 124 GR FMJ O. F (15) 5/16 (8) L 2 (HPSA).357 MAGNM 158 GR SP O. F (20) 7/16 (12) L 3 (SPSA).44 MAGNM 240 GR LEAD O. F (59) 1-3/16 (30) L 4 (HPR).30 cal RIFLE 180 GR SP O. F (71) 1-3/8 (35) L mm RIFLE 150 GR FMJ O. F (15) 5/16 (8) L 6 9 mm ZI NOTES 124 GR FM J ML TIPLE SHOTS GR FM J ML TIPLE SHOTS 150 GR FM J ML TIPLE SHOTS ALL THE ABOVE PRODCTS ARE L LISTED O. F (57) 1-1/8 (29) L mm M O. F (71) 1-3/8 (35) L mm M L Listed product levels 1, 2, 3, 4, 5, 6, 7 and 8. ABBREVIATIONS SED IN THIS CHART L - nderwriters Laboratory MPSA - Medium Power Small Arms SP - Soft Point HPSA - High Power Small Arms GR - Grains SPSA - Super Power Small Arms HPR - High Power Rifle FMJ - Full Metal Jacket JSP - Jacketed Soft Point ARMORTEX IMITED WARRANTY Armortex provides a limited warranty for its Armortex products for a period of twelve months (1 year) from date of shipment against defects in material and workmanship. Such limited warranty is made only to those who purchase these products directly from Armortex. Please contact Armortex for the complete limited warranty. use to which others may put any material or product. Each user of the material or product should make his or her own tests to determine the suitability of the material or product. Liability under this limited warranty is limited to either replacement of product, excluding cost of installation, or at Armortex s option to refund Armortex s invoice price. Armortex products are designed for installation by persons having requisite skill and knowledge and at their own discretion and risk. Armortex has no control over the Armortex and FRAG-STOP are registered trademarks of Armortex, Inc. ARMORTEX FAX
4 ARMORTEX BLAST MITIGATION WINDOWS 625 BL LP 225 PROJECTED In an increasingly unfriendly world we are seeing the growing use of explosive devices as tools of terrorism. Governments as well as private industry have developed new standards to address the threats to facilities and occupants. For blasts to be effective they must be close to the chosen target. Though it is not always possible to control the setback or standoff distance, windows and doors can be designed to mitigate most blast incidences. With these designs blast mitigation can be achieved to lessen injury and loss of life. ARMORTEX now offers two product groups of blast windows, all of which are thermally broken. Our model 625 BL blast mitigation window protects against high blast overpressure up to 42 psi. Our model 625 BL/BR is also available for both blast and bullet resistant protection up to.30 cal. armor piercing. The model 625 windows are designed for commercial, industrial, military or Department of State applications. Additionally available from ARMORTEX are our LP blast windows with low over pressure limits of 6 psi in compliance with the FC January 2007, GSA TS and ASTM F These models are LP 225 Projected, LP 225 Fixed, LP 400 Single Hung and LP 400 Fixed. A typical application for this type of window may be military bases, GSA facilities or other occupied public structures. ARMORTEX FAX
5 ARMORTEX BLAST MITIGATION WINDOWS 625 BL LP 225 FIXED ARMORTEX BLAST MITIGATION THERMALLY BROKEN WINDOW MODELS Model 625 High Over Pressure 625 BL, 42 psi, 300 msec, frame depth 6.25, maximum glazing cavity depth 2.875, engagement BL/BR, 42 psi, 300 msec,.30 cal. Armor Piercing, maximum glazing thickness 2.875, engagement 1.75 Model LP Low Over Pressure All tested to FC January 2007, GSA-TS and ASTM LP 225 Projected out, frame depth 2.25, maximum glazing thickness 1.00 LP 225 Fixed, frame depth 2.25, maximum glazing thickness 1.00 LP 400 Single hung, frame depth 4.0, maximum glazing thickness 1.00 LP 400 Fixed, frame depth 4.0, maximum glazing thickness 1.00 ARMORTEX FAX
6 TRANSACTION WINDOW- CLAMP TYPE TRANSACTION WINDOW- 3-SIDED HOLLOW METAL FRAME COMBINATION TRANSACTION WINDOW- L LISTED STAINLESS STEEL FRAME SPEAKERS METAL PACKAGE RECIEVERS ARCHITECTRAL ALMINM FRAMING SYSTEMS BLLET RESISTANT TRANSACTION DRAWERS BLLET RESISTANT WOOD AND STEEL DOORS ARMORTEX 5926 CORRIDOR PARKWAY SCHERTZ, TX FAX INFO@ARMORTEX.COM
Ratings of Bullet-Resistant Materials
Testing Ratings of Bullet-Resistant Materials Underwriters Laboratories, Inc. Rating Ammunition Grain (g) Velocity Min Max fps mps No. Of Shots Level 1 9mm Full Metal Copper Jacket with Lead Core 124 8.0
More informationNIJ BODY ARMOR CLASSIFICATIONS
NIJ BODY ARMOR CLASSIFICATIONS Type IIA (9 mm;.40 S&W) Type IIA armor that is new and unworn shall be tested with 9 mm Full Metal Jacketed Round Nose (FMJ RN) bullets with a specified mass of 8.0 g (124
More informationCOMMONLY SPECIFIED BALLISTIC TESTS U.S. MARKET
COMMONLY SPECIFIED BALLISTIC TESTS U.S. MARKET NOTE: THIS IS GENERAL GUIDANCE, REFER TO STANDARDS FOR FURTHER DETAILS. Test Level Threat Round Velocity Range (ft/sec) # of shots Shot Pattern ASTM F1233
More informationTechnical Data Sheet TDSBB Ballistic, Blast and Physical Attack Primary and Secondary window and glazed protection systems
Technical Data Sheet TDSBB 1007 Ballistic, Blast and Physical Attack Primary and Secondary window and glazed protection systems Blast rated ballistic and physical attack Secondary window Designed primarily
More informationHiPer-tex fibre for light weight, cost effective blast and ballistic protection solutions
HiPer-tex fibre for light weight, cost effective blast and ballistic protection solutions ballistic protection ballistic protection blast protection taking glass fibre to a higher level HiPer-tex fibre:
More informationPlanned Revisions to the NIJ Ballistic Resistant Body Armor Test Standard
Outline Planned the NIJ Ballistic Resistant Body Armor Test Standard Michael A. Riley, Amanda Forster, Kirk Rice Office of Law Enforcement Standards National Institute of Standards and Technology Gaithersburg,
More informationBallistic Block Penetration Ballistic Testing Test Report Report Date: May 14, 2010 By Sam Raheb
Ballistic Block Ballistic Testing Test Report Report Date: May 14, 2010 By Sam Raheb Customer Rephouse America LLC 995 Alta Mar Terrace, San Jose CA 95126 Phone: 559 840 3546 Mike Brinkers Email: Email:
More informationS.O.F COMMAND & CONTROL ARMORED VEHICLE. Leader in Supplying Special Operation Forces Equipment and Training TA04032
COMMAND & CONTROL ARMORED VEHICLE TA04032 Make & Model: Dodge RAM 00 4X4 factory new. Our design of the armor can be easily adjusted to any similar platform (according to the client needs). Measurements:
More informationBlast tested to 100kg and now 500kg charges and also IED devices
Technical Data Sheet TDSBB 1005 Blast tested to 100kg and now 500kg charges and also IED devices Ballistic and Blast Steel and Aluminium Glazed Window, Door and Screen Systems Blast rated ballistic window
More informationSALES QUOTE. Prepared for: Reference Number: SA-II-3 BUYER:
Prepared for: Reference Number: 20160604-SA-II-3 BUYER: EMAIL SELLER: STARK ARMORING Contact person: Irina Ivanov 11 Vanley Crescent, Unit 3 Toronto ON, M3J 2B7 CANADA Office: +1(416) 630-9900 Mobile:+1(705)
More information2010 Structural armor SyStemS
2010 Structural armor SyStemS armor SyStemS IntroductIon The risks in today s world call for protection against some of the harshest ballistic, blast and fragmentation threats. As a world leader in hard-armor
More informationSchedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
Jabal Amman PO Box 928125 Amman 11190 Jordan Contact: Eng. Samir Al Majali Head of Test and Evaluation Tel: + 962 (2) 6256024 ext. (3097) Fax: + 962 (2) 6256024 E-Mail: Sareef@kaddb.mil.jo Website: www.kaddb.mil.jo
More informationARMORED NISSAN PATROL Typically Armored to Level A9/B6+ Against 7.62x39, 5.56x45, 7.62x51, M193, & M80 ball. Can be Armored to Any Level.
ARMORED NISSAN PATROL Typically Armored to Level A9/B6+ Against 7.62x39, 5.56x45, 7.62x51, M193, & M80 ball. Can be Armored to Any Level. BASE VEHICLE SPECIFICATIONS MAKE: MODEL: YEAR: ENGINE: POWER: TRANSMISSION:
More informationARMORED CHEVROLET SUBURBAN LIMO
ARMORED CHEVROLET SUBURBAN LIMO ARMORED CHEVROLET SUBURBAN LIMO Typically Armored to Level A9/B6+ Against 7.62x39, 5.56x45, 7.62x51, M193, & M80 ball. Can be Armored to Any Level. BASE VEHICLE SPECIFICATIONS
More informationSFI SPECIFICATION 4.2 EFFECTIVE: OCTOBER 26, 1994*
SFI SPECIFICATION 4.2 EFFECTIVE: OCTOBER 26, 1994* PRODUCT: Tractor Blankets 1.0 GENERAL INFORMATION 1.1 This SFI Specification establishes uniform test procedures and minimum standards for evaluating
More informationThe CBJ Technology. 7.62x51 NATO.300 Blackout 6.5x25 CBJ Ball
The CBJ Technology 7.62x51 NATO.300 Blackout 6.5x25 CBJ Ball The CBJ Technology CBJ Tech AB has developed the 6.5x25 CBJ Cartridge, which utilizes subcaliber technology (tungsten core projectile inside
More informationARMORED BMW X5 Typically Armored to Level A9/B6+ Against 7.62x39, 5.56x45, 7.62x51, M193, & M80 ball. Can be Armored to Any Level.
ARMORED BMW X5 Typically Armored to Level A9/B6+ Against 7.62x39, 5.56x45, 7.62x51, M193, & M80 ball. Can be Armored to Any Level. BASE VEHICLE SPECIFICATIONS MAKE: MODEL: YEAR: ENGINE: POWER: TRANSMISSION:
More informationPENTAGON PROTECTION USA
PENTAGON PROTECTION USA Shock Tube Testing for Window Systems March 2009 San Antonio, Texas ABS Consulting Project Number 2127174 ABSG Consulting, Inc. 14607 San Pedro, Suite 215 San Antonio, TX 78232
More informationARMORED TOYOTA LAND CRUISER GXR
ARMORED TOYOTA LAND CRUISER GXR ARMORED TOYOTA LAND CRUISER GXR Typically Armored to Level A9/B6+ Against 7.62x39, 5.56x45, 7.62x51, M193, & M80 ball. Can be Armored to Any Level. BASE VEHICLE SPECIFICATIONS
More informationCOMPOSITE MATERIALS ELET.CA
COMPOSITE MATERIALS ELET.CA CORAX Armors Elet.Ca armors are developed to ensure a superior level of ballistic protection and quality, employing typical aerospace industry techniques for the construction
More informationARMORED MASTIFF SWAT TRUCK Typically Armored to Level A9/B6+ Against 7.62x39, 5.56x45, 7.62x51, M193, & M80 ball. Can be Armored to Any Level.
ARMORED MASTIFF SWAT TRUCK Typically Armored to Level A9/B6+ Against 7.62x39, 5.56x45, 7.62x51, M193, & M80 ball. Can be Armored to Any Level. BASE VEHICLE SPECIFICATIONS MAKE: Ford MODEL: F-650 Mastiff
More informationARMORED CHEVROLET TAHOE Typically Armored to Level A9/B6+ Against 7.62x39, 5.56x45, 7.62x51, M193, & M80 ball. Can be Armored to Any Level.
ARMORED CHEVROLET TAHOE Typically Armored to Level A9/B6+ Against 7.62x39, 5.56x45, 7.62x51, M193, & M80 ball. Can be Armored to Any Level. BASE VEHICLE SPECIFICATIONS MAKE: MODEL: YEAR: ENGINE: POWER:
More informationSALES QUOTE. Prepared for: Reference Number: SA-II-2 BUYER:
Prepared for: Reference Number: 20160604-SA-II-2 BUYER: EMAIL SELLER: STARK ARMORING Contact person: Irina Ivanov 11 Vanley Crescent, Unit 3 Toronto ON, M3J 2B7 CANADA Office: +1(416) 630-9900 Mobile:+1(705)
More informationSchedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
Jabal Amman PO Box 928125 Amman 11190 Jordan Contact: Col. Eng. Samir Al Majali Test and Evaluation Manager Tel: + 962 (2) 6256024 ext. (3097) Fax: + 962 (2) 6256024 E-Mail: Sareef@kaddb.mil.jo Website:
More informationARMED SERVICES BOARD OF CONTRACT APPEALS
ARMED SERVICES BOARD OF CONTRACT APPEALS Appeal of -- ) ) Pinnacle Armor, Inc. ) ASBCA No. 55831 ) Under Contract No. GS-07F-0313J ) Delivery Order No. FA8620-05-F-3735 ) APPEARANCE FOR THE APPELLANT:
More informationARMORED LEXUS LS 600H L Typically Armored to Level A9/B6+ Against 7.62x39, 5.56x45, 7.62x51, M193, & M80 ball. Can be Armored to Any Level.
ARMORED LEXUS LS 600H L Typically Armored to Level A9/B6+ Against 7.62x39, 5.56x45, 7.62x51, M193, & M80 ball. Can be Armored to Any Level. BASE VEHICLE SPECIFICATIONS MAKE: MODEL: YEAR: ENGINE: POWER:
More informationBALLISTIC AND BLAST RESISTANT SECURITY SOLUTIONS
BALLISTIC AND BLAST RESISTANT SECURITY INTRODUCTION Political, social and terrorist unrest in today s world requires protection against the harshest ballistic, blast and fragmentation threats utilized
More informationARMORED FORD F-550 BOXER
ARMORED FORD F-550 F BOXER SWAT TRUCK Typically Armored to Level A9/B6+ Against 7.62x39, 5.56x45, 7.62x51, M193, & M80 ball. Can be Armored to Any Level. BASE VEHICLE SPECIFICATIONS MAKE: Ford MODEL: F-550
More informationLight-weight ballistic plates
Light-weight ballistic plates The Celier Aviation Hard Armour Plate code named CAS-P is the lightest range of plates available in this category. Weight has become increasingly important as soldiers are
More informationTECHNICAL SPECIFICATION MR01-II DESIGN PERFORMANCE. TEST STANDARD: NIJ Standard: Teijin Twaron Microlaminate
20 TECHNICAL SPECIFICATION MR01-II ARMOR MATERIAL THINNESS ASTM STANDARD D1777-97 NEW V50 9MM FMJ RN 124 GR. CONDITIONED V50 9MM FMJ RN 124 GR. NEW V50.357 MAG JSP 158 GR. CONDITIONED V50.357 MAG JSP 158
More informationMULTIPRODUCTOS INTERNACIONALES, S.A.
MULTIPRODUCTOS INTERNACIONALES, S.A. 12 calle, 1-25 zona 10 Edificio Géminis 10, segundo nivel local 221 CODE: B.E. Armor 2000 External Vest, B.E. Armor 4000 External Vest Product Description; 1) External
More informationArmored to Level A9/B6+ Against 7.62x39, 5.56x45, 7.62x51, M193, & M80 Ball
Armored to Level A9/B6+ Against 7.62x39, 5.56x45, 7.62x51, M193, & M80 Ball TABLE OF CONTENTS Table of Contents.... Page 2 Vehicle Specifications...... Page 3 Opaque Armor Details...... Page 4 Transparent
More informationM193 BALL x 45mm
M193 BALL orthrop Grumman maintains the critical skills, Applications orthrop Grumman s cartridges are in ATO. They are verified to function The M193 has a 55-grain projectile with no tip identification.
More informationCARE AND MAINTENANCE MANUAL
CARE AND MAINTENANCE MANUAL 1 TABLE OF CONTENTS TABLE OF CONTENTS Mission 1 Introduction 2 Threats and Protection 3 Inspection of Armor, Alteration and Exchange Process 4 Rational Replacement 5 Limited
More informationARMORED MERCEDES-BENZ S550. Professionally Armored to Level A9/B x39, 5.56x45, 7.62x51, M193, & M80 ball
ARMORED MERCEDES-BENZ S550 Professionally Armored to Level A9/B6+ 7.62x39, 5.56x45, 7.62x51, M193, & M80 ball BASE VEHICLE SPECIFICATIONS MAKE: MODEL: VIN: YEAR: ENGINE: POWER: Mercedes-Benz S550 4MATIC
More informationBallistic Resistant Protective Materials
U.S. Department of Justice National Institute of Justice National Institute of Justice Technology Assessment Program Ballistic Resistant Protective Materials NIJ Standard 0108.01 ABOUT THE TECHNOLOGY ASSESSMENT
More informationARMOR TECHNOLOGY SOLUTIONS
ATS GROUP Skopje Macedonia is a modern private factory headquartered in Skopje, Macedonia, Europe. We offer wide range of composites products and innovative body armor. In a field of equipment for army
More informationARMORED CHRYSLER 300C Typically Armored to Level A9/B6+ Against 7.62x39, 5.56x45, 7.62x51, M193, & M80 ball. Can be Armored to Any Level.
ARMORED CHRYSLER 300C Typically Armored to Level A9/B6+ Against 7.62x39, 5.56x45, 7.62x51, M193, & M80 ball. Can be Armored to Any Level. BASE VEHICLE SPECIFICATIONS MAKE: MODEL: YEAR: ENGINE: POWER: TRANSMISSION:
More informationThreat Awareness and Risk Mitigation
Threat Awareness and Risk Mitigation AASHTO Technical Committee for Bridge Security and Hazards June 12, 2017 Tim Keller tim.keller@hardwirellc.com Manager, Bridge and Infrastructure Armor Programs Hardwire,
More informationSFI SPECIFICATION 7.2 EFFECTIVE: DECEMBER 15, 2006 *
SFI SPECIFICATION 7.2 EFFECTIVE: DECEMBER 15, 2006 * PRODUCT: Sportsman Lower Engine Containment Device 1.0 GENERAL INFORMATION 1.1 This SFI Specification establishes uniform test procedures and minimum
More informationBlast Protection Damper
Protection Damper plate shown as transparent height width 250mm wide 6.35mm thick blast plate bolted to damper frame 178mm 250mm standard depth 76mm standard flange Application The damper is designed for
More informationUniversal Defense for Military Equipment
Armored Cars Product Specification And Armoring Process Armored Cars For decades Universal Defense has supplied armored vehicles to client s world wide. Our position as one of the market leaders is due
More informationSFI SPECIFICATION 14.3 EFFECTIVE: AUGUST 25, 2017 *
SFI SPECIFICATION 14.3 EFFECTIVE: AUGUST 25, 2017 * PRODUCT: Nitro-Methane Fuel Supercharger Restraint Devices 1.0 GENERAL INFORMATION 1.1 This SFI Specification establishes uniform test procedures and
More informationCOMPOSITE ARMOR SOLUTIONS LAND, SEA AND AIR
LAND, SEA AND AIR INTRODUCTION PROTECH Armor Systems offers a broad array of ballistic and fragmentation solutions for land, sea and aircraft applications. From full OEM integration to retrofits, PROTECH
More informationStandards & Regulations Guide. For manual attacks/ballistic/blast resistance
Standards & Regulations Guide For manual attacks/ballistic/blast resistance Standards & regulations Guide Which level of security is suitable for your needs? Vandalism, manual attacks, ballistic attacks,
More informationSTADIP STADIP PROTECT STADIP ULTIMAX STADIP SENTRY GLASS PLUS
CCERTIFIED STADIP ERTIFIED Safety glass/ ballistic resistant glass/ blast resistant glass in compliance with CE certification AoC1 level PROTECT 165 A range of effective glass types for security purposes
More informationSoldier Lethality and Wound Ballistics from a Swedish Perspective
Product Manager Small Arms Systems Soldier Lethality and Wound Ballistics from a Swedish Perspective Presentation to NDIA 51 st Joint Services Small Arms Symposium Atlantic City, May 18, 2005 Per G. Arvidsson
More informationAlliant Ammunition Systems Company LLC. Advanced Medium Caliber HEI Ammunition -Mechanically Fuzed and Delay Initiated. Presented by Mr.
Alliant Ammunition Systems Company LLC Advanced Medium Caliber HEI Ammunition -Mechanically Fuzed and Delay Initiated Presented by Mr. Brian Tasson 20mm ZAP 30mm ZAP Outline Project Objective Design Approach
More informationPPSS BULLET RESISTANT VESTS CATALOG 2017 PPSS
BULLET RESISTANT VESTS CATALOG 2017 Contents 2. Bullet Resistant Vests - Model CV2 3. Bullet Resistant Vests - Model OV2 4. Bullet Resistant Vests - Model EV2 5. Bullet Resistant Vests - Model HVV2 6.
More informationBallistic Resistance of Police Body Armor NIJ Standard
U.S. Department of Justice National Institute of Justice National Institute of Justice Technology Assessment Program Ballistic Resistance of Police Body Armor NIJ Standard 0101.03 Ballistic Resistance
More informationwww.indianarmour.com Armoured Vehicles We provide armoured and protection of aircraft with composite material. Our state-of-the-art facilities assure high volume production with consistently superior quality.
More informationStiletto Ammunition: Can be fired from current weapons without modification
Stiletto Ammunition: Can be fired from current weapons without modification Penetrate much thicker/stronger armour, glass and building materials than current ammunition in service with NATO armed forces
More informationUnequal Technologies Company, Armor Protection Ballistic Resistance and Stab Resistance Test
POC: Mr. Randy Tatham Purchase Order No.: UNQ-53018-127 Test Date: 30 May 2018 Job No.: 2389-086 Unequal Technologies Company, Armor Protection Ballistic Resistance and Stab Resistance Test Prepared by:
More informationTOYOTA LAND CRUISER 200 SERIES 2016 YM B6 LEVEL ARMOURED
TOYOTA LAND CRUISER 200 SERIES 2016 YM B6 LEVEL ARMOURED Pictures for reference purpose only Proposal HSV15052016 Toyota Land Cruiser GXR 200 Series 4.6 Petrol V8-2016 Ballistic Specifications: Harrow
More informationNIJ s Body Armor Testing Program 8 th Annual Technologies for Critical Incident Preparedness September 7, 2006
NIJ s Body Armor Testing Program 8 th Annual Technologies for Critical Incident Preparedness September 7, 2006 Debra Stoe Physical Scientist Standards and Testing Program Office of Science & Technology
More informationA SUCCESSFUL EUROPEAN COOPERATION POWERFUL & COMPACT 40 CTAS CASED TELESCOPED ARMAMENT SYSTEM
A SUCCESSFUL EUROPEAN COOPERATION POWERFUL & COMPACT 40 CTAS CASED TELESCOPED ARMAMENT SYSTEM A SUCCESSFUL EUROPEAN COOPERATION COMPANY CTA International is a 50/50 Joint Venture Company founded in 1994
More informationRheinmetall Ballistic Protection GmbH, Armor Protection Ballistic Resistance Test. NTS-Chesapeake Testing 4603B Compass Point Road Belcamp, MD 21017
POC: Mr. Ken Mueller P.O. : Wire Test Date: 29 November 207 Job : 224-00 Rheinmetall Ballistic Protection GmbH, Armor Protection Ballistic Resistance Test Prepared by: Craig A. Thomas Laura M. Deptol Belcamp,
More informationVEHICLE ARMOR AVAIL enlight BODY ARMOR RISE TRUTH SNAP SPECIAL USE ARMOR ALLY ONE CUSTOM SOLUTIONS 30
VEHICLE ARMOR AVAIL 10-11 enlight 12-13 BODY ARMOR RISE 16-19 TRUTH SNAP 20-25 SPECIAL USE ARMOR ALLY ONE 28-29 CUSTOM SOLUTIONS 30 OUR MISSION DEFEND LIFE FROM THREAT WITH REVOLUTIONARY BALLISTIC PROTECTION
More informationCarbon Fiber Parts Performance In Crash SITUATIONS - CAN WE PREDICT IT?
Carbon Fiber Parts Performance In Crash SITUATIONS - CAN WE PREDICT IT? Commercial Division of Plasan Sasa 2016 by Plasan 1 ABOUT THE AUTHORS D.Sc - Technion - Israel Institute of technology Head of the
More informationEPIC. express line. Proudly Manufactured in the USA by Check-All Valve Rev. D
EPIC BY express line Proudly Manufactured in the USA by Check-All Valve www.checkall.com Express Line EPIC By Check-All Valve In the beginning... the first Check-All valve was designed and built for use
More informationSTAB RESISTANCE TEST REPORT DAT E: 15/ 12/ 2013 REPORT NO.: Relative Humidity. Weight [kg] 1.12 Size [mm] 400X4000 Drop Weight (gram) : 1900
STAB RESISTANCE DAT E: 15/ / 2013 REPORT NO.: 13036 CUSTOMER: MODEL: : UD ANTI STAB MATERIAL NIJ STD. 05.00. USA Leve 1 PLY NO. : 3 TEMP. 1 [C 0 ] ing : Composite Material Roma Plastelina [kg] 1. Size
More informationBlast Protection Damper
height width 250mm standard 76mm standard flange Application The damper is designed for protection against sudden blasts and instantaneous pressure changes. Vertical and horizontal mounting applications
More informationGallet TC 800 and TC 500 series ARCH Helmet System
Gallet TC 800 and TC 500 series ARCH Helmet System Because every life has a purpose Your commitment preserves lives, MSA protects yours Gallet history 1860 1970s 1985 Creation of CGF Gallet MSA contracts
More informationARMORED TOYOTA LAND CRUISER. Professionally Armored to Level A9/B x39, 5.56x45, 7.62x51, M193, & M80 ball
ARMORED TOYOTA LAND CRUISER Professionally Armored to Level A9/B6+ 7.62x39, 5.56x45, 7.62x51, M193, & M80 ball BASE VEHICLE SPECIFICATIONS MAKE: Toyota MODEL: Land Cruiser (U.S Model) YEAR: Brand New VIN:
More informationInsensitive Munitions (IM) Testing: 25mm Target Practice, Discarding Sabot with Trace (TPDS-T), M910 Cartridge using ECL Propellant
Insensitive Munitions (IM) Testing: 25mm Target Practice, Discarding Sabot with Trace (TPDS-T), M910 Cartridge using ECL Propellant Insensitive Munitions (IM) Testing: 25mm Target Practice, Discarding
More informationFULL PERFORMANCE FROM SHORT BARRELS PERFORMANCE LINE FOR SHORT BARRELS.308 WIN.
FULL PERFORMANCE FROM SHORT BARRELS PERFORMANCE LINE FOR SHORT BARRELS.308 WIN. Many hunters are not aware of the loss of performance from shorter barrels. Great, that RWS now covers this gap with the
More informationAFG501 ALUMINUM FEMA 361 LOUVER LOUVER TYPE RECOMMENDED SPECIFICATION
LOUVER TYPE AFG501 ALUMINUM FEMA 361 LOUVER Visible Mullion Louver Type... AFG501 Blade Material... Extruded Aluminum, Alloy 6061-T6 Blade... 0.25 in. (6.35 mm) Frame Material... Formed Aluminum, Alloy
More informationINCH-POUND. MIL-PRF-46103E 6 January 1998 SUPERSEDING MIL-A-46103D 23 June l989 PERFORMANCE SPECIFICATION ARMOR: LIGHTWEIGHT, COMPOSITE
INCH-POUND MIL-PRF-46103E 6 January 1998 SUPERSEDING MIL-A-46103D 23 June l989 PERFORMANCE SPECIFICATION ARMOR: LIGHTWEIGHT, COMPOSITE This specification is approved for use by all Departments and Agencies
More informationFuture infantry squads shall be equipped with lighter, Safer, programmable but more lethal ammunition
Future infantry squads shall be equipped with lighter, Safer, programmable but more lethal ammunition U.S. Army small-arms experts recently laid out a blueprint of future small-arms goals that would equip
More informationBODY ARMOR SYSTEMS.
BODY ARMOR SYSTEMS www.croshield.hr ABOUT US CROSHIELD Ltd. is modern privately owned company headquarted in Croatia-Europe. We are company specialized for development, manufacturing and distribution of
More informationALPHA ARMOURING ARMOURED AMBULANCE
ALPHA ARMOURING ARMOURED AMBULANCE Special version: Alpha Armouring Ambulance Base vehicle: Toyota Protection level: VPAM BRV 2009 VR7 (Includes CEN VR6+/ BR6+) Model: Land Cruiser HZJ 78 Alpha Armouring
More informationNational Institute of Justice
U.S. Department of Justice Office of Justice Programs National Institute of Justice National Institute of Justice Law Enforcement and Corrections Standards and Testing Program Ballistic Resistance of Personal
More informationCollecting In-theatre Vehicle Blast Data using Stand-alone On-board Data Acquisition Technology
Collecting In-theatre Vehicle Blast Data using Stand-alone On-board Data Acquisition Technology Allen Vanguard s Blackbird: A Vehicle Mounted Blast Data Acquisition System ALLENVANGUARD 2010 Authored by:
More informationG. GLENTOS S.A. Ballistic & Blast Resistant Buildings Guard houses / Sentry boxes / Partitions / Doors / Secure transaction drawers
G. GLENTOS S.A. Ballistic & Blast Resistant Buildings Guard houses / Sentry boxes / Partitions / Doors / Secure transaction drawers Kibo cabins Kibo bulletproof cabins Available ballistic levels: A. Level
More informationArmored Helmet Hardtop Product Description
31-October 2005 Amtech Corporation 180 East Jones Rd Wapato, WA 98951 Byron R. Burson Director of Engineering & Military Sales 509-877-6451 bburson@amtechcorp.com Proprietary Information Amtech Corporation
More informationHornady Product Lines:
Hornady Product Lines: V Varmint Express C Custom DG Dangerous Game Series LE LEVERevolution SF Superformance CD Critical Defense R i fl eb a l l i s t i c s......................................................
More informationSIGMAGUARD CSF 660. PRODUCT DATA SHEET December 12, 2014 (Revision of April 1, 2009) DESCRIPTION
DESCRIPTION Two-component, solvent-free, amine-cured epoxy coating PRINCIPAL CHARACTERISTICS Solvent-free coating for the protection of steel storage tanks against petroleum products Can be applied by
More informationGENERAL PROVISIONS: Furnish and install one steel multi-platform motor truck scale and associated electronic controls.
GENERAL PROVISIONS: Furnish and install one steel multi-platform motor truck scale and associated electronic controls. The scale shall have a clear and unobstructed weighing surface of not less than 72
More informationMaterials for Ground Platform Survivability
Materials for Ground Platform Survivability Dr. Douglas Templeton Senior Technical Expert Ground System Survivability US Army TARDEC Warren, MI 48397-5000 17 May 2011 Report Documentation Page Form Approved
More informationBallistic materials handbook
Ballistic materials handbook The power of Aramid Connect and Protect www.teijinaramid.com 2 Teijin Aramid and ballistic protection The intensity of threatening environments for law enforcement, emergency
More informationAssessing the Methodology for Testing Body Armor
Assessing the Methodology for Testing Body Armor Ronald D. Fricker, Jr. Naval Postgraduate School and Alyson G. Wilson Iowa State University August 1, 2010 Background Armor manufactured from various materials
More information20 x 102 Mk244 APDS. (Armor Piercing Discarding Sabot)
20 x 102 Mk244 APDS (Armor Piercing Discarding Sabot) Markings: Fuze: No fuze Projectile: blank Drive-band: blank Casing: 20MM APDS MK 244 MOD 0 OLM12A126-001 (Olin Corp. Metal Prod., Marion, Illinois,
More informationOutfitter. PH Precision Hunter S Steel Match
Ballistics Rifle Ammunition Product Lines: AG American Gunner AW American Whitetail B Hornady BLACK CD Critical Defense C Custom CL Custom Lite Hornady Bullet Types: A-MAX BT..... Boattail BTHP.. Boattail
More informationTOYOTA 76 ARMOURED LANDCRUISER STATIONWAGON
TOYOTA 76 ARMOURED LANDCRUISER STATIONWAGON TOYOTA 76 DISCREETLY ARMOURED LANDCRUISER Discreet Armouring Concept The Toyota LandCruiser is the base vehicle of choice for many humanitarian and security
More informationNATIONAL TECHNICAL SYSTEMS V50 BALLISTIC LIMIT TEST
V50 BALLISTIC LIMIT TEST Date Received: 11/17/16 Record No.: HHV16004-1 Via: Hand Carry Test Date: 11/17/16 Returned Via: Hand Carry Customer: Hard Head Veterans Sample Threat Range 4 Manufacturer: Hard
More informationSIGMAZINC 68 SP / AMERCOAT 68 SP
DESCRIPTION Two-component, high solids polyamide adduct cured zinc rich epoxy primer PRINCIPAL CHARACTERISTICS Designed as a system primer in various paint systems for aggressive environments Excellent
More informationNATIONAL INSTITUTE OF JUSTICE HARD ARMOR COMPLIANCE TEST REPORT
Issue/Revision Number: Initial Report Date: 5/22/2017 200826-0 NVLAP Lab Code Test Laboratory Name: Oregon Ballistic Laboratories Address: 2873 22nd St SE Salem OR 97302 RMA Armament, Inc. Customer: 22800
More information110 gr. GMX TAP #80875 Polymer Tipped Copper Alloy Bullet B.C. =.305 BLACKOUT. Hornady Product Summary. B.C. = Ballistic Coefficient
110 gr. GMX TAP #80875 Polymer Tipped Copper Alloy Bullet B.C. =.305 The 300 Blackout TAP offers excellent barrier performance from 10-16" barreled rifles. The monolithic copper alloy bullet design fouls
More informationSIGMATHERM 230 / PPG HI-TEMP 230
DESCRIPTION Two-component, high-build, heat-resistant phenolic epoxy coating PRINCIPAL CHARACTERISTICS Suitable as heat resistant system under insulation up to 230 C (450 F) Good anticorrosive properties
More informationBonstrand PSX L3, PSX L3C, PSX JF and PSX JFC Polysiloxane-phenolic Fire-resistant Fiberglass Pipe and Fittings
Bonstrand PSX L3, PSX L3C, PSX JF and PSX JFC Polysiloxane-phenolic Fire-resistant Fiberglass Pipe and Fittings For offshore platforms, marine and onshore service Description Bondstrand PSX JF and PSX
More informationRV-10 Center Arm Rest Console
RV-10 Center Arm Rest Console Important Notice: This manual contains important information that may affect the safety of your aircraft. Read the Warranty / Agreement below. There is information in the
More informationSIGMAZINC 105. PRODUCT DATA SHEET December 15, 2014 (Revision of July 1, 2013) DESCRIPTION. Two-component, zinc epoxy primer PRINCIPAL CHARACTERISTICS
DESCRIPTION Two-component, zinc epoxy primer PRINCIPAL CHARACTERISTICS Excellent anticorrosive properties Quick-drying, can be overcoated after 25 minutes Excellent application properties Cures at temperatures
More informationWaterjet Cutting System
- For your success Customize Expand Simplify World's No.1 of WATERJET World's No.1 of WATERJET SUPERJET Features of Waterjet Cutting 1 No heat is produced Since this waterjet cutting is non-contact machining
More informationSFI SPECIFICATION 28.1 EFFECTIVE: AUGUST 25, 2017 *
SFI SPECIFICATION 28.1 EFFECTIVE: AUGUST 25, 2017 * PRODUCT: Polymer (Foam-Filled) Fuel Cells 1.0 GENERAL INFORMATION 1.1 This SFI Specification establishes uniform test procedures and minimum standards
More informationTACTICAL ARMOR TOGETHER, WE SAVE LIVES CATALOG 24 SAFARILAND.COM
2017 CATALOG TOGETHER, WE SAVE LIVES. 24 SAFARILAND.COM 800.347.1200 BODY WORN CAMERAS CONCEALABLE Lab tested and field proven: PROTECH Tactical is proud to be one of the most well-known and widely respected
More informationSIGMAZINC 102 HS. PRODUCT DATA SHEET December 15, 2014 (Revision of December 1, 2012) DESCRIPTION
DESCRIPTION Two-component, high solids polyamide cured zinc rich epoxy primer PRINCIPAL CHARACTERISTICS Very good primer for systems with high solids epoxy buildcoats Can also be used as a system primer
More informationJoint Gun Effectiveness Model (JGEM) Navy Accredited Minor/Medium Caliber Operational Tool
Joint Gun Effectiveness Model (JGEM) Navy Accredited Minor/Medium Caliber Operational Tool The Direct Fire Analysis Solution National Defense Industrial Association Gun and Missile Systems Conference &
More informationYOUR PARTNER IN LIFE PROTECTION
YOUR PARTNER IN IFE PROTECTION 2 VICTORY TACTICA GEAR Victory Tactical Gear (VTG) is a premier distributor of ballistic resistant products and tactical gear. Owned and operated by current and retired law
More information/ Technology Assessment / Program
NIJ Standard-0101.06 Ballistic Resistance of Body Armor, published in 2008, is the current NIJ standard for ballistic-resistant body armor. All previous NIJ ballisticresistant body armor standards are
More informationBUSHMASTER FAMILY OF VEHICLES.
> BUSHMASTER FAMILY OF VEHICLES www.thalesgroup.com.au The Thales Group is a world leader in mission critical systems and solutions for aerospace, defence and security markets. Thales operates in 50 countries,
More information