GROUNDS & TURFCARE MACHINERY GUIDE 2016 THE POWER TO PERFORM

Transcription

1 GROUNDS & TURFCARE MACHINERY GUIDE 2016 THE POWER TO PERFORM

2 TERMS & CONDITIONS 1. Goods are supplied at a carriage charge of per machine and remain the property of Votex until the account in is settled full. 2. All prices are in UK Sterling and exclude V.A.T., which will be added at the appropriate rate, if applicable. 3. All previous price lists are cancelled with effect from the date of this price list. 4. All weights and measurements are approximate. Votex reserve the right to alter specification and prices in line with our policy of continual improvement. Further information is available on Votex Hereford Ltd Redhill Depot Ross Road Hereford HR2 8BH Phone: Fax: 44 (0) (0) sales@votex.co.uk 2

3 Table of Content BLOWERS...5 B10P... 6 B10M... 8 B10H B20H B B B B GOLF VACUUM UNITS M M M M PTO VACUUM TRAILERS VT450S VT VT VT VT TRANSPORT COSTS

4 4

5 BLOWERS 5

6 B10P Professional light weight push blower The turbine is made of light weight aluminium, the housing and frame are made of steel. Therefore the B10P is a sturdy though light weight blower. With mitred wheels the B10P adapts the back pressure of the turbine and no forces are felt in the push bar. The turbine is designed to produce less noise as possible. Also a height adjustable push bar is standard. Specifications B10P Driving Motor Starting system Nominal power (according CE) Fuel Tank capacity Frame Material Axle Wheels/tyres Turbine Construction turbine Construction turbine housing Intake Air control Honda, air cooled, GX270, 4-stroke Recoil starter 9,0/6,5 HP/kW Petrol, unleaded 5,3 l. Steel box profile Splitted steel axle Mitred, air tyres 4.00x8 Die cast aluminium, single sided open Sheet steel Single sided Vertical and frontal air guidance flap Vertical flap remotely operated Dimensions Weight Length Width Height Noise level At user (LpA) 78 kg 73 cm 68 cm 78 cm 86 db(a) 6

7 s Basic machine EWB0B1002 Push blower model B10P 2.700,00 Freight charges Transport rate A 7

8 B10M Sturdy professional motor blower The turbine is made of light weight aluminium, the housing of sheet steel. This blower can withstand a few nocks while the weight remains low. The housing has standard a remotely controlled vertical air guidance flap. The Honda petrol engine offers maximum flexibility to the carriage vehicle: no PTO or hydraulic connection is needed. Specifications B10M Driving Motor Starting system Nominal power (according CE) Fuel Tank capacity Turbine Construction turbine Construction turbine housing Intake Air control Dimensions Weight Length Width Height Noise level At user (LpA) Honda, air cooled, GX270, 4-stroke Recoil starter 9,0/6,5 HP/kW Petrol, unleaded 5,3 l. Die cast aluminium, single sided open Sheet steel Single sided Vertical air guidance flap remotely controlled 72 kg 50 cm 60 cm 62 cm 84 db(a) 8

9 s Basic machine EWB Motor blower model B10M 2.675,00 Options W Air outlet bended 45º 185,00 Freight charges Transport rate A 9

10 B10H Sturdy professional hydraulic blower The turbine is made of light weight aluminium, the housing of sheet steel. This blower can withstand a few nocks while the weight remains low. The housing has standard a remotely controlled vertical air guidance flap. The blower can be mounted on practically any vehicle with a hydraulic system. Specifications B10H Driving Motor Pump capacity Control Safeguard Connection Hydraulic gear motor 28 l./min. at 175 bar Standard with flow control valve Standard with non return valve 1x DA valve pressureless return (Transport rate excl. 3 hoses) Turbine Construction turbine Construction turbine housing Intake Air control Mounting Dimensions Weight Length Width Height Die cast aluminium, single sided open Sheet steel Single sided Vertical air guidance flap remotely controlled 2 mounting strips, excl. supporting legs 72 kg 48 cm 63 cm 85 cm 10

11 s Basic machine EWB Hydraulic blower model B10H 2.900,00 Options W Air outlet bended 45º 185,00 Freight charges Transport rate A 11

12 B20H Strong professional hydraulic blower The turbine and the housing are made of sheet steel. The turbine is designed according to the forced air guidance principle. This principle not only generates lots of air, but also a high pressure. The blower can be mounted on practically any vehicle with a hydraulic system. Specifications B20H Driving Motor Pump capacity Control Safeguard Connection Turbine Construction turbine Construction turbine housing Intake Air control Mounting Dimensions Weight Length Width Height Hydraulic orbit motor 50l./min. at 175 bar Standard with flow control valve Standard with non return valve 1x DA valve (Transport rate excl. 2 hoses) Sheet steel, single sided closed Sheet steel Single sided Several air outlets available 2 mounting strips, excl. supporting legs 72 kg 74 cm 65 cm 70 cm 12

13 s Basic machine EWB Hydraulic blower model B20H 4.160,00 Air outlet W EWB Fixed air outlet straight Air outlet 180º hydraulic adjustable (1x DA valve req.) 1.150,00 Options W EWB0B2012 Air outlet bended 125º for cleaning small roads1 3-point linkage Cat. IN, I & II with support legs 315,00 525,00 Freight charges Transport rate A 1 Only possible in combination with W

14 B10 Compact PTO driven blower The turbine is made of light weight aluminium, the housing of durable sheet steel. This blower can withstand a few nocks while the weight remains low. The housing has standard a remotely controlled vertical air guidance flap. The blower can be mounted on tractors starting at 10 HP PTO power. Specifications B10 Driving PTO PTO-shaft Minimum PTO power Frame Construction frame 3-point linkage Terrain-adapting undercarriage Parking stand Turbine Construction turbine Construction turbine housing Intake Air control Dimensions Weight Length Width Height 540 RPM clockwise in propelled direction when rear mounted Standard without free wheel 10,0/7,5 HP/kW Sheet steel with steel box profile Category IN, I and II rear mounted N.A. Support legs Die cast aluminium, single sided open Sheet steel Single sided Vertical air guidance flap remotely controlled 67 kg 48 cm 94 cm 81 cm 14

15 s Basic machine EWB0B1001 PTO blower model B ,00 PTO-shaft EWB EWB PTO-shaft PTO-shaft with free wheel 185,00 Freight charges Transport rate A 15

16 B20 Sturdy PTO driven blower Turbine and housing are made of durable sheet steel. The turbine is designed according to the forced air guidance principle. This principle not only generates lots of air, but also a high pressure. The blower can fit several PTO speeds and directions. Thence this blower can also be mounted onto the front of a tractor. Several options are available as terrain-adapting undercarriage, turnable air outlet and an air outlet for cleaning small roads. Specifications B20 Driving PTO PTO-shaft Minimum PTO power Frame Construction frame 3-point linkage Terrain-adapting undercarriage Parking stand Turbine Construction turbine Construction turbine housing Intake Air control Dimensions Weight Length Width Height 540/1000 RPM (counter-) clockwise in propelled direction when rear or front mounted Standard without free wheel 20,0/14,5 HP/kW Sheet steel with steel box profile Category IN, I and II rear or front mounted Option Support legs Sheet steel, single sided closed Sheet steel Single sided Several air outlets available 105 kg 58 cm 94 cm 81 cm 16

17 Construction style Model PTO speed PTO direction Air direction A 540 W Y B 540 V X C 1000 W Y D 1000 V X s Basic machine EWB0B2001 PTO blower model B ,00 Construction style EWB085002Model A EWB085003Model B EWB085004Model C EWB085005Model D 350,00 350,00 Air outlet W EWB Air outlet strait Air outlet 180º hydraulic adjustable (1x DA valve req.) 1.150,00 PTO-shaft EWB EWB EWB PTO-shaft PTO-shaft with free wheel for model A and C PTO-shaft with free wheel for model B and D 185,00 185,00 Options W EWB0B2011 Air outlet bended 125º for cleaning small roads1 Terrain-adapting undercarriage with tyres 11x ,00 775,00 Freight charges Transport rate A 1 Only possible in combination with W

18 B40 Powerful PTO driven blower Turbine and housing are made of durable sheet steel. The turbine is designed according to the forced air guidance principle and has a double sided air inlet. This enlarges the air intake without enlarging the turbine. Though the capacity, the weight of the rotating parts is extremely low. This low weight prevents overcharging of the power train of the tractor when thrown into gear. The blower can fit several PTO speeds and directions. Thence this blower can also be mounted onto the front of a tractor. A terrain-adapting undercarriage is standard. Options like a turnable air outlet are available. Specifications B40 Driving PTO PTO-shaft Minimum PTO power Frame Construction frame 3-point linkage Terrain-adapting undercarriage Parking stand Turbine Construction turbine Construction turbine housing Intake Air control Dimensions Weight Length Width Height 540/1000 RPM (counter-) clockwise in propelled direction when rear or front mounted Standard without free wheel 40,0/30,0 HP/kW Steel Category I and II rear or front mounted Standard Support leg Sheet steel, double sided closed Sheet steel Double sided Several air outlets available 278 kg 130 cm 96 cm 120 cm 18

19 Construction style Model PTO speed PTO direction Air direction A 540 W Y B 540 W X C 540 V Y D 540 V X E 1000 W Y F 1000 W X G 1000 V Y H 1000 V X s Basic machine EWB0B4001 PTO blower model B ,00 Construction style EWB205102Model A and E EWB205103Model B and F EWB205110Model C and G EWB205111Model D and H 450,00 450,00 PTO speed EWB EWB PTO speed 540 RPM PTO speed 1000 RPM Air outlet EWB EWB EWB EWB Fixed air outlet with manual operated vertical air guidance flap Fixed air outlet with hydraulic operated vertical air guidance flap Air outlet 180º hydraulic adjustable with manual operated vertical air guidance flap (1x DA valve req.) Air outlet 180º hydraulic adjustable with electric operated vertical air guidance flap (1x DA valve 12V connection req.) 605, , ,00 See next page 19

20 PTO-shaft EWB EWB EWB PTO-shaft PTO-shaft with free wheel for model A, B, E and F PTO-shaft with free wheel for model C, D, G and H 185,00 185,00 Freight charges Transport rate B 20

21 21

22 B60 Powerful high capacity blower The B60 is based on the B40. With the same construction style as the B40, the B60 has the same advantages. The high speed turbine requests more power and has more capacity as in the B40. Identical to the B40, the B60 is available with 540 or 1000 RPM PTO (counter-) clockwise, thence also suitable for front mounting. Specifications B60 Driving PTO PTO-shaft Minimum PTO power Frame Construction frame 3-point linkage Terrain-adapting undercarriage Parking stand Turbine Construction turbine Construction turbine housing Intake Air control Dimensions Weight Length Width Height 540/1000 RPM (counter-) clockwise in propelled direction when rear or front mounted Standard without free wheel 60,0/45,0 HP/kW Steel Category I and II rear or front mounted Standard Support leg Sheet steel, double sided closed Sheet steel Double sided Vertical air guidance flap 278 kg 130 cm 96 cm 120 cm 22

23 Construction style Model PTO speed PTO direction Air direction A 540 W Y B 540 W X C 540 V Y D 540 V X E 1000 W Y F 1000 W X G 1000 V Y H 1000 V X s Basic machine EWB0B6001 PTO blower model B ,00 Construction style EWB205102Model A and E EWB205103Model B and F EWB205110Model C and G EWB205111Model D and H 450,00 450,00 PTO speed EWB EWB PTO speed 540 RPM PTO speed 1000 RPM Air outlet EWB EWB EWB EWB Fixed air outlet with manual operated vertical air guidance flap Fixed air outlet with hydraulic operated vertical air guidance flap Air outlet 180º hydraulic adjustable with manual operated vertical air guidance flap (1x DA valve req.) Air outlet 180º hydraulic adjustable with electric operated vertical air guidance flap (1x DA valve 12V connection req.) 605, , ,00 See next page 23

24 PTO-shaft EWB EWB EWB PTO-shaft PTO-shaft with free wheel for model A, B, E and F PTO-shaft with free wheel for model C, D, G and H 185,00 185,00 Freight charges Transport rate B 24

25 25

26 860 GOLF Compact blower for front mounting The 860 GOLF is a blower specially designed for front mounting to compact tractors, tool carriers and front mowers. The 860 GOLF offers optimal view to the job. The 860 GOLF is suitable for hydraulic or mechanic drive trains. The mechanical version is available for several PTO speeds and directions. Specifications 860 GOLF Driving (PTO) PTO PTO-shaft Minimum PTO power Driving (hydraulic) Motor Pump capacity Control Safeguard Connection Frame Construction frame Terrain-adapting undercarriage Parking stand Turbine Construction turbine Construction turbine housing Intake Air control Dimensions Weight Length Width Height Optional Standard 20,0/14,5 HP/kW Hydraulic orbit motor 50l./min. at 175 bar Standard with flow control valve Standard with non-return valve 1x DA valve (Transport rate excl. 2 hoses) Steel Standard Support legs Sheet steel, single sided closed Sheet steel Single sided Several air outlets available 145 kg 100 cm 127 cm 97 cm 26

27 s Basic machine EWB Blower model 860 GOLF 6.605,00 Construction style EWB086002Connection kit Kubota F3060 front mowers EWB086003Connection kit John Deere series compact utility tractors EWB086004Connection kit John Deere 1505/1515 front mowers EWB086005Connection kit John Deere 1435/1445/1565 front mowers EWB086008Connection kit DM-Trac 204 EWB086009Connection kit Kubota F2880/3680 front mowers EWB086010Connection kit Toro 3000/3000-D front mowers EWB086011Connection kit Shibaura CM264/274 Air outlet W EWB Air outlet strait Air outlet 180º hydraulic adjustable (1x DA valve req.) 1.150,00 Wheels EWB EWB Terrain-adapting undercarriage tyres 3.00x4 Terrain-adapting undercarriage tyres 11x ,00 Options W Air outlet bended 125º for cleaning small roads3 315,00 Freight charges Transport rate B 3 Only possible in combination with W

28 28

29 VACUUM UNITS 29

30 521M Professional debris loader De 521M is a motor propelled suction unit that can be easily attached to a trailer or pickup. Assembling and disassembling is possible without tools. This makes the 521M a flexible deployable machine that can be easily taken to the job. The design is focussed on a long life. The V-belts prevent damage to the engine as the turbine is unexpectedly blocked by any obstacle. Turbine and housing are made of durable materials. All together, these unique points make that the 521M will run for many years. Specifications 521M Driving Motor Starting system Nominal power (according CE) Fuel Tank capacity Frame Material Turbine Construction turbine Construction turbine housing Suction hose Material Dimension Air outlet Type Dimension Dimensions Weight Length Width Height Noise level At user (LpA) Honda, air cooled, GX390, 4-stroke Recoil starter 9,5/13,0 kw/hp Petrol, unleaded 6,5 l. Steel box profile 8 mm. hardox 6 mm. hardox Reinforced UV-resistant polyurethane Heavy duty, Length 3,3 m., Ø 200 mm 360º turnable with flap Ø 150 mm 145 kg 78 cm 118 cm 126 cm 91,2 db(a) 30

31 s Basic machine EWB Suction unit model 521M 5.310,00 Suction hose W W Suction hose 3,3 wither - Ø 200 mm Suction hose 5,0 wither - Ø 200 mm 295,00 Options EWB W W Balancer 2-4 kg Lengthening piece air outlet 500 mm Ø 150 mm Transportation support suction hose 275,00 110,00 495,00 Freight charges Transport rate B 31

32 541M Powerful motor vacuum unit The 541M is a motor vacuum unit that connects power to flexibility. With the 20 HP Honda petrol engine, a tractor with PTO is not needed and there is enough power to do a lot of work in a short time. Turbine and housing are made of durable material. The indirect drive with V-belts protects the engine for sudden blockings. The 541M will offer you loads of capacity for many years. Specifications 541M Driving Motor Starting system Nominal power (according CE) Fuel Tank capacity Frame Material Turbine Construction turbine Construction turbine housing Suction hose Material Dimensions Air outlet Type Dimensions Dimensions Weight Length Width Height Noise level At user (LpA) Honda, air cooled, GX630, 4-stroke Electric 14,5/20,0 kw/hp Petrol, unleaded 15 l. Steel box profile 10 mm. hardox 8 mm. hardox Reinforced UV-resistant polyurethane Heavy duty, Length 3,3 m., Ø 200 mm 360º turnable with flap Ø 200 mm 280 kg 70 cm 132 cm 130 cm 91,8 db(a) 32

33 s Basic machine EWB Suction unit model 541M 8.470,00 Suction hose W W Suction hose 3,3 wither - Ø 200 mm Suction hose 5,0 wither - Ø 200 mm 295,00 Options EWB W W Balancer 2-4 kg Lengthening piece air outlet 500 mm Ø 200 mm Transportation support suction hose 275,00 175,00 495,00 Freight charges Transport rate B 33

34 525M Professional vacuum unit on carriage The 525M has the same specifications as the 521M, but is built on a carriage for fast traffic. Simple (dis- )connecting to a towing car, the 525M is quickly deployable. The design is focussed on a long life. The indirectly driven turbine with V-belts protect the engine for sudden blockings. Turbine and housing are made of durable materials. Also the 525M will go for years. Specifications 525M Driving Motor Starting system Nominal power (according CE) Fuel Tank capacity Frame Material Axle Wheels/tyres Turbine Construction turbine Construction turbine housing Suction hose Material Dimensions Air outlet Type Dimensions Dimensions Weight Length Width Height Noise level At user (LpA) Honda, air cooled, GX390, 4-stroke Recoil starter 9,5/13,0 kw/hp Petrol, unleaded 6,5 l. Steel box profile Torsion shaft for fast traffic Radial tyres 185 R 13 8 mm. hardox 6 mm. hardox Reinforced UV-resistant polyurethane Heavy duty, Length 5,0 m., Ø 200 mm 360º turnable with flap Ø 150 mm 310 kg 140 cm 180 cm 190 cm 91,2 db(a) 34

35 s Basic machine EWB Suction unit model 525M On request Options EWB W EWB Balancer 2-4 kg Lengthening piece air outlet 500 mm Ø 150 mm DIN towing eye instead or ball hitch coupler 275,00 110,00 165,00 Freight charges Transport rate B 35

36 546M Powerful motor vacuum unit on carriage The 546M has the same specifications as the 541M but is built onto a carriage for fast traffic. Simple (dis- )connecting to a towing car will bring the 546M quick and easy to any job. The design is focussed on a long life. Indirectly propelled by V-belts protect the engine to sudden blockings of the turbine. Turbine and housing are made of durable materials. Specifications 546M Driving Motor Starting system Nominal power (according CE) Fuel Tank capacity Frame Material Axle Wheels/tyres Turbine Construction turbine Construction turbine housing Suction hose Material Dimensions Air outlet Type Dimensions Dimensions Weight Length Width Height Noise level At user (LpA) Honda, air cooled, GX630, 4-stroke Electric 14,5/20,0 kw/hp Petrol, unleaded 15 l. Steel box profile Torsion shaft for fast traffic Radial tyres 185 R mm. hardox 8 mm. hardox Reinforced UV-resistant polyurethane Heavy duty, Length 5,0 m., Ø 200 mm 360º turnable with flap Ø 150 mm 420 kg 140 cm 180 cm 210 cm 91,8 db(a) 36

37 s Basic machine EWB Suction unit model 546M ,00 Options EWB W EWB Balancer 2-4 kg Lengthening piece air outlet 500 mm Ø 200 mm DIN towing eye instead or ball hitch coupler 275,00 175,00 165,00 Freight charges Transport rate B 37

38 570PTO PTO driven vacuum unit The 570PTO is a vacuum unit to do a lot of work with. It is PTO driven and with the 3-point linkage easily to connect to any tractor with 40 HP and more. Due to a turnable exhaust and a long hose, the 570PTO lets itself position well to the job. The designed is focussed to a ling life. The indirectly driven turbine is connected to the PTO over v-belts. These protect tractor and PTO at sudden blocks of the turbine. Turbine and housing are made of durable materials. Specifications 570PTO Driving PTO PTO-shaft Minimum PTO power Frame Construction frame 3-point linkage Parking stand Turbine Construction turbine Construction turbine housing Suction hose Material Dimensions Air outlet Type Dimensions Dimensions Weight Length Width Height 540 RPM clockwise in propelled direction when rear mounted Standard without free wheel 40,0/30,0 HP/kW Steel box profile Category I and II rear mounted Sub frame 10 mm. hardox 16 mm. hardox Reinforced UV-resistant polyurethane Heavy duty, Length 3,3 m., Ø 300 mm 360º turnable with flap Ø 300 mm 325 kg 105 cm 90 cm 210 cm 38

39 s Basic machine EWB Suction unit model 570PTO 7.390,00 Suction hose W W Suction hose 3,3 wither - Ø 300 mm Suction hose 5,0 wither - Ø 300 mm 360,00 Air outlet bended W Air outlet bended W Air outlet bended reinforced 385,00 PTO-shaft EWB EWB PTO-shaft PTO-shaft with free wheel 185,00 Options EWB W Balancer 2-4 kg Lengthening piece air outlet 500 mm Ø 300 mm 275,00 210,00 Freight charges Transport rate B 39

40 40

41 VACUUM TRAILERS 41

42 VT450S Vacuum trailer for fast traffic The VT450S is a vacuum trailer based on a standard trailer for fast traffic. The standard trailer is mostly made of aluminium and has therefore a loading capacity of more than kg with a gross weight of kg. The trailer can tilt electric-hydraulic to 3 sides. The vacuum unit is fixed to the front of the trailer. The vacuum unit can be (dis-)mounted in 5 minutes without tools. The trailer has standard a tunnel for optional ramps. The VT450S is the first vacuum trailer that is year round deployable for a variety of jobs. Specifications VT450S Trailer Frame Frame vacuum unit Construction frame Parking stand Turbine Construction turbine Construction turbine housing Suction hose Material Dimensions Air outlet Type Dimensions Gross weight Net loading capacity (without/with vacuum unit) Loading height Length Width Height (without/with vacuum unit) Bucket size (LxWxH) Noise level At user (LpA) Humbaur HTK series Steel box profile Support legs 8 mm. hardox 6 mm. hardox Reinforced UV-resistant polyurethane Heavy duty, Length 5,0 m., Ø 200 mm Turnable kg 2.556/2355 kg Ca. 74 cm 452 cm 190 cm 121/200 cm 314x175x35 cm 91,2 db(a) 42

43 s Basic machine EWB Trailer4 Vacuum unit 521 for trailer Humbaur with cover Trailer Humbaur HTK Trailer Humbaur HTK Trailer Humbaur HTK ,00 On request On request On request Body Metal grid side panels On request Options EWB Balancer 2-4 kg 275,00 Freight charges Transport rate On request 4 Excl. handling fee and vehicle registration 43

44 VT420 Compact high tipping vacuum sweeper De VT420 is a compact vacuum sweeper with a high tipping container of 4.2 m3. With a low total weight and a low centre or gravity, this trailer is ideally combined with compact tractors from 45 hp and more. The turbine offers lots or power. Because it is made or durable steel, it has a long life. The VT420 comes standard with a 1.7 meter vacuum funnel with a weight transfer system. It is because or this system that the funnel is best capable or following the terrain without damaging it. The VT420 can be equipped with several options like a manual suction pipe, a scarifier and a flail mower. With both the scarifier and the flail mower, the material is collected in the same pass. Therefore the VT420 is versatile and almost year round deployble. Specifications VT420 Frame Drawbar Brakes Tyres Turbine Construction turbine Construction turbine housing Funnel (standard) Working width Transport width Brush shaft Scarifier (option) Working width Transport width Scarifier shaft Flail shaft Dimensions Net weight Length Width Height Container Adjustable drawbar Unbraked, optional hydraulic or overrun brakes 15.0 x 17 line profile RIB 12 mm. hardox Double isolated with 3mm wearing plates. 170 cm 187 cm 6 brush strips, hydraulic propelled 170 cm 187 cm Hardox, 36 knives, mechanic propelled J-flails, mechanic propelled kg 475 cm 187 cm 230 cm 4,2 m3 44

45 s Basic machine EWB0400HK01 Vacuum trailer model VT420 with: - Turbine housing with wearing plates and durable turbine - Valve with multiple connections for suction hose and funnel - hydraulic operated container - wide angle PTO-shaft with free wheel - mechanical support leg - height adjustable drawbar - metal grid top ,00 Braking system EWB0400HK12 EWB0400HK13 EWB0400HK10 Unbraked upper/lower drawbar Hydraulic braked upper/lower drawbar Mechanical braked upper drawbar 900, ,00 Towing eye EWB0400HK19 EWB0400HK20 Tyres EWB0400HK02 EWB0400HK03 EWB0400HK08 Fixed towing eye 40mm (DIN)5 Turnable towing eye 40mm6 Turnable towing eye 50mm2 Standard tyres AW 15x x17 line profile RIB grass tyres 19.0x17 line profile RIB grass tyres 295,00 695,00 Support leg EWB0400HK11 EWB0400HK05 Mechanical support leg Hydraulic support leg 650,00 See next page 5 6 Only possible in combination with EWB0400HK14 Only possible in combination with EWB0400HK12/EWB0400HK13 45

46 Cover EWB0400HK15 EWB0400HK16 Metal grid top Filter cloth 550,00 Options EWB0400HK06 EWB0400HK09 EWB0400HK17 EWB0400HK23 EWB0400HK07 EWB0400HK41 EWB0400HK42 EWB0400HK45 EWB0400HK44 Funnel with brush 1700, hydr. propelled (1x DA valve req.) Funnel with brush 1700, mech. propelled (1x DA valve req.) Scarifier shaft with (dis-)assembly trailer7 Flail shaft with (dis-)assembly trailer1 Manual operated suction hose 5m. Ø 200mm incl. suspension brackets Traffic lighting Mud guards8 Wide mud guards9 Anti-scalp wheels for funnel 625, , , ,00 475,00 750,00 750,00 700,00 Freight charges Transport rate On request 7 Only possible in combination with EWB0400HK09 8 Only possible in combination with EWB0400HK02/EWB0400HK03 9 Only possible in combination with EWB0400HK08 46

47 47

48 VT550 Compact multifunctional vacuum trailer The VT550 is a vacuum trailer for maintenance of parks, plantations, sports fields, golf courses and public roads. A container of 5.5 m3 and a low own weight makes it possible to use the trailer on compaction sensitive soils. The VT550 tilts hydraulically and has an automatic opening tailgate. Turbine and housing are made of durable materials. Several options are possible, like a suction hose with an oscillation system for leafs on the road sides, a funnel of 1.7 meter wide for sports fields, golf courses and parks and a scarifier shaft to scarify and clean in one shift. With these options, the VT550 is from spring to winter deployable. Specifications VT550 Frame Drawbar Brakes Tyres Turbine Construction turbine Construction turbine housing Suction boom with oscillating system (option) Side shift Height lift Oscillating system Suction hose Funnel (option) Working width Transport width Brush shaft Scarifier (option) Working width Transport width Scarifier shaft Dimensions Net weight Length Width (standard/funnel/boom/funnelboom) Height (standard/boom) Container Upper- or lower drawbar Hydraulic-, pneumatic- or overrun brakes /17 or 500/50 R mm. hardox 16 mm. hardox 100 cm 50 cm Standard with hydraulic motor Super duty Ø 300 mm 165 cm 203 cm 6 brush strips, hydraulically driven 165 cm 203 cm Hardox, 36 knives, mechanically driven kg 515 cm 167/179/190/203 cm 243/295 cm 5,5 m3 48

49 s Basic machine KW Vacuum trailer model VT ,00 Drawbar W W Upper drawbar Lower drawbar1 Towing eye W W W Fixed towing eye 40mm (DIN) Turnable towing eye 40mm1 Turnable towing eye 50mm1 Braking system W W W Unbraked Hydraulic braked Mechanical braked parking brake 900, ,00 Tyres W W Standard tyres 15.0/55-17 Grass tyres 500/50R17 800,00 Support leg W W Mechanical support leg Hydraulic support leg 650,00 Inlet turbine housing W Single inlet 45º W Double inlet with manual operated valve W Double inlet with el. hydraulic operated valve (joystick) 1.370, ,00 See next page 1 Only possible in combination with W or W

50 Options W W W W W W W W VCF W W Suction boom with hydraulic adjustment, oscillating system and joystick (1x DA valve req.) Funnel with brush 1700, hydraulic propelled (1x DA valve req.) Funnel with brush 1700, mechanical propelled (1x DA valve req.) Scarifier shaft with (dis)assembly trailer1 Suction boom & funnel hydraulic with brush and joystick (1x DA valve req.) Suction boom & funnel mechanical with brush and joystick (1x DA valve req.) Filter cloth on rotating frame Manual operated suction hose 5m. Ø200 mm incl. suspension brackets Quick connector for manual suction hose to suction boom Mud guards Traffic lighting 8.875, , , , , , , ,00 On request 1.215,00 550,00 Freight charges Transport rate On request 1 Only possible in combination with W or W

51 51

52 VT850 Sturdy vacuum trailer The VT850 is a vacuum trailer for maintenance of parks and public roads. Due to the sturdy structure and the big container, this is the most suitable container for communities and contractors to clean urban areas of leafs and debris. The container is short and high to keep the overall length and width small. The container tilts hydraulically and has an automatic opening tailgate. Turbine and housing are made of durable materials. Several options are possible, like a suction hose with an oscillation system for leafs on the road sides, a funnel of 2.0 meter wide for sports fields, golf courses and parks and a scarifier shaft to scarify and clean in one shift. The VT850 is a sturdy all rounder with an extreme long life. Specifications VT850 Frame Drawbar Brakes Tyres Turbine Construction turbine Construction turbine housing Suction boom with oscillating system (option) Side shift Height lift Oscillating system Suction hose Funnel (option) Working width Transport width Brush shaft Scarifier (option) Working width Transport width Scarifier shaft Dimensions Net weight Length Width (standard/funnel/boom/funnelboom) Height (standard/boom) Container Upper- or lower drawbar Hydraulic-, pneumatic- or overrun brakes /22.5 or 500/60 R mm. hardox 16 mm. hardox 100 cm 50 cm or 130 cm (option) Standard with hydraulic motor Super duty Ø 300 mm 195 cm 223 cm 6 brush strips, hydraulically driven 195 cm 223 cm Hardox, 42 knives, mechanically driven kg 565 cm 195/223/206/223 cm 275/295 cm 8,5 m3 52

53 s Basic machine KW Vacuum trailer model VT ,00 Drawbar W W Upper drawbar Lower drawbar1 Towing eye W W W Fixed towing eye 40mm (DIN) Turnable towing eye 40mm1 Turnable towing eye 50mm1 Brakes W W W Hydraulic braked Mechanical braked parking brake Pneumatic braked parking brake 845,00 On request Tyres W W Standard tyres /22.5 Grass tyres 500/60R ,00 Support leg W W Mechanical support leg Hydraulic support leg 650,00 Inlet turbine housing W Single inlet 45º W Double inlet with manual operated valve W Double inlet with el. hydraulic operated valve (joystick) 1.370, ,00 See next page 1 Only possible in combination with W or W

54 Options W W W W W W W W VCF W W Suction boom with hydraulic adjustment, oscillating system and joystick (1x DA valve req.) Funnel with brush 2000, hydraulic propelled (1x DA valve req.) Funnel with brush 2000, mechanical propelled (1x DA valve req.) Scarifier shaft with (dis)assembly trailer1 Suction boom & funnel hydraulic with brush and joystick (1x DA valve req.) Suction boom & funnel mechanical with brush and joystick (1x DA valve req.) Vertical reach suction boom 130 cm instead of 50 cm Filter cloth on rotating frame Manual operated suction hose 5m. suction hose Ø200 mm incl. suspension brackets Quick connector for manual suction hose to suction boom Mud guards Traffic lighting 8.875, , , , , , , , ,00 On request 1.215,00 550,00 Freight charges Transport rate On request 1 Only possible in combination with W or W

55 55

56 VT1100 Vacuum trailer with capacity The VT1100 is a vacuum trailer for maintenance of parks and public roads. Due to the big container, this is the trailer for communities and contractors who are looking for even more capacity. The container is short and high to keep the overall length and width small. The container tilts hydraulically and has an automatic opening tailgate. Turbine and housing are made of durable materials. Several options are possible, like a suction hose with an oscillation system for leafs on the road sides, a funnel of 2.0 meter wide for sports fields, golf courses and parks and a scarifier shaft to scarify and clean in one shift. The VT1100 is a sturdy trailer with maximum capacity. Specifications VT1100 Frame Drawbar Brakes Tyres Turbine Construction turbine Construction turbine housing Suction boom with oscillating system (option) Side shift Height lift Oscillating system Suction hose Funnel (option) Working width Transport width Brush shaft Scarifier (option) Working width Transport width Scarifier shaft Dimensions Net weight Length Width (standard/funnel/boom/funnelboom) Height (standard/boom) Container Upper- or lower drawbar Hydraulic-, pneumatic- or overrun brakes /22.5 or 500/60 R mm. hardox 16 mm. hardox 100 cm 50 cm or 130 cm (option) Standard with hydraulic motor Super duty Ø 300 mm 195 cm 223 cm Standard, hydraulic propelled 195 cm 223 cm Hardox, 42 knives, mechanically driven kg 565 cm 195/223/206/223 cm 325 cm 11 m3 56

57 s Basic machine VKW Vacuum trailer model VT ,00 Drawbar W W Upper drawbar Lower drawbar Towing eye W W W Fixed towing eye 40mm (DIN) Turnable towing eye 40mm Turnable towing eye 50mm Brakes W W Hydraulic braked Pneumatic braked parking brake On request Tyres W Grass tyres 500/60R ,00 Support leg W W Mechanical support leg Hydraulic support leg 650,00 Inlet turbine housing W Single inlet 45º W Double inlet with manual operated valve W Double inlet with el. hydraulic operated valve (joystick) 1.370, ,00 See next page 57

58 Options W W W W W W W VCF W W Suction boom with hydraulic adjustment, oscillating system and joystick (1x DA valve req.) Funnel with brush 2000, hydraulic propelled (1x DA valve req.) Funnel with brush 2000, mechanical propelled (1x DA valve req.) Scarifier shaft with (dis)assembly trailer14 Suction boom & funnel hydraulic with brush and joystick (1x DA valve req.) Suction boom & funnel mechanical with brush and joystick (1x DA valve req.) Vertical reach suction boom 130 cm instead of 50 cm Manual operated suction hose 5m. suction hose Ø200 mm incl. suspension brackets Quick connector for manual suction hose to suction boom Mud guards Traffic lighting 8.775, , , , , , , ,00 On request 1.215,00 550,00 Freight charges Transport rate On request 14 Only possible in combination with W or W

59 TRANSPORT COSTS 59

60 60

61 Transport costs The Netherlands Rate group A B 51,00 102,00 Belgium Rate group A B 56,50 113,00 Germany Rate group A B 113,00 226,00 France & Luxembourg Rate group A B 149,00 298,00 United Kingdom Rate group A B 205,00 410,00 Sweden, Denmark, Poland, Czech Republic, Slovakia & Austria Rate group A B 164,00 328,00 Italy Rate group A B 179,50 359,00 Switzerland Rate group A B 231,00 462,00 61

62 Votex Hereford Ltd Redhill Depot Ross Road Hereford HR2 8BH Phone: Fax: 44 (0) (0) THE POWER TO PERFORM