MINNESOTA PRICING PAGES (Typed Responses Required) (SEE SPECIAL TERMS AND CONDITIONS) Delivery Starting Point : City

Transcription

1 SEQ. #46-25 MINNESOTA PRICING PAGES (Typed Responses Required) December 205 Price quote for: Aftermarket Tractor/Skidsteer Attachments Vendor Name: Contact Person: Street Address: P.O. Box: City, State, Zip Phone #: Toll Free #: Fax #: Address: Virnig Manufacturing, Inc. Bryan Virnig 0 Gateway Drive NE Rice, MN, bryan@virnigmfg.com.0 Manufacturer's Name: Attachment Description: Warranty Term (months, years): Percent Discount (%) to be applied to Price List: Price List I.D. and Date: 2.0 Delivery Charges: (SEE SPECIAL TERMS AND CONDITIONS) Delivery Starting Point : City State, ZIP Virnig Manufacturing, Inc. Skidsteer and Compact Tractor year 7% Virnig 206 Price List - //206 NO FLAT RATE ALLOWED Rice MN, Price Per Loaded Mile: Mimimum Delivery Charge: $.50 $ Price for additional Service Manual: Price for additional Parts Manual: Free Free 4.0 Installation services may be requested on an 'as needed' basis. (See Special Terms and Conditions) Installation Services - Price Per Labor Hour (Shop Rate): $ New Equipment For Rent Program (See Solicitation Special Terms and Conditions.) If new equipment offered is available for rent, with the option to purchase, list the hourly, weekly and monthly rental rate. Indicate the percent of the rental fee paid by the Customer that will be applied to the equipment purchase price. Hourly Rental Rate: $ Weekly Rental Rate: $ Monthly Rental Rate: $ Percent (%) of Rental Fee applied to purchase price: % 6.0 Rental Return or Demo Equipment For Sale (See Solicitation Special Terms and Conditions.) If a rental return or demo equipment becomes available for purchase and the equipment is currnetly on contract, the equipment may be purchased by the Customer. DEDUCT the cost per Used Hour' from the original Contract Price: $

2 SEQ. #46-25 MINNESOTA PRICING PAGES (Typed Responses Required) December 205

3 SWIFT EVENT TITLE & NUMBER: AFTERMARKET TRACTOR/SKIDSTEER ATTACHMENTS ** Following is a list of all distributors that are authorized to sell the equipment listed above. ** The Swift Vendor Number (SWIFT UD) must be complete, including the vendor Swift ID and Location Code (LOC CODE). ** All distributors MUST provide the required insurance certificates to the State as outline in the Swift Event Special Terms and Conditions before any State Contract may be executed. COMPANY NAME SWIFT ID LOC CODE COMPANY ADDRESS ST /ZIP PHONE CONTACT NAME Arnold's Equipment North Star Road, Alden MN / Brad Wermedal Arnold's Equipment Lindbergh Trail, Glencoe MN / Josh Miller Arnold's Equipment State Hwy 55 E, Kimball MN / Al Schramm Arnold's Equipment Howard Drive, North Mankato MN / Christin Engebretson Arnold's Equipment Quail Road NE, Sauk Rapids MN / Wayne Henrichs / Kevin Boyd Arnold's Equipment Industrial Drive, St. Martin MN / Jon Zaske Arnold's Equipment Hwy 7 South, Willmar MN / Jon Zaske Lano Equipment Highway 0, Anoka MN / Scott Fahey Midwest Machinery Hwy 22, Glencoe MN / Ask for Gov't Sales Rep Midwest Machinery North Franklin St, Glenwood MN / Ask for Gov't Sales Rep Midwest Machinery th Ave NE, Sauk Rapids MN / Ask for Gov't Sales Rep Midwest Machinery State Hwy 27 E, Alexandria MN / Ask for Gov't Sales Rep Midwest Machinery Keats Ave SW, Howard Lake MN / Ask for Gov't Sales Rep Midwest Machinery Baptist Church Rd, Princeton MN / Ask for Gov't Sales Rep Midwest Machinery Lake Avenue S, Paynesville MN / Ask for Gov't Sales Rep Midwest Machinery Centre Street, Sauk Centre MN / Ask for Gov't Sales Rep Midwest Machinery Hwy 27 E, Little Falls MN / Ask for Gov't Sales Rep Midwest Machinery Hwy 0 W, Wadena MN / Ask for Gov't Sales Rep Midwest Machinery nd St NW, Aitkin MN / Ask for Gov't Sales Rep Midwest Machinery Foley Road, Baxter MN / Ask for Gov't Sales Rep Midwest Machinery County Rd 20, Stewart MN / Ask for Gov't Sales Rep Titan Machinery County Road 0 E Shakopee MN / Andy Bethel Titan Machinery th Street SW Fargo ND / Andy Bethel Titan Machinery Ingersoll Ave, Crookston MN / Andy Bethel Titan Machinery Haines Road, Hermantown MN / Andy Bethel Titan Machinery James Road, Rogers MN / Andy Bethel Titan Machinery North Hwy 59, Marshall MN / Andy Bethel Titan Machinery N. Cliff Ave, Sioux Falls SD / Andy Bethel Titan Machinery N 626 Wuensch Road, La Crosse WI / Andy Bethel Virnig Manufacturing Gateway Drive NE, Rice MN / Bryan Virnig Ziegler Inc West 94th Street, Bloomington MN / Ask for Gov't Sales Rep Ziegler Inc US Hwy 69, Buhl MN / Ask for Gov't Sales Rep Ziegler Inc Cty Rd 0 E, Shakopee MN / Ask for Gov't Sales Rep Ziegler Inc North Hwy 59, Marshall MN / Ask for Gov't Sales Rep Ziegler Inc th Street, St. Cloud MN / Ask for Gov't Sales Rep Ziegler Inc Garfield Ave, Duluth MN / Ask for Gov't Sales Rep Ziegler Inc State Hwy 20 W, Fergus Falls MN / Ask for Gov't Sales Rep Ziegler Inc rd Ave SW, Crookston MN / Ask for Gov't Sales Rep Ziegler Inc W Freeway Drive, Columbus MN / Ask for Gov't Sales Rep Ziegler Inc Liberty Lane, Brainerd MN / Ask for Gov't Sales Rep Ziegler Inc Howard Dr, North Mankato MN / Ask for Gov't Sales Rep Ziegler Inc Hwy 63 S, Rochester MN / Ask for Gov't Sales Rep

4 TABLE OF CONTENTS New for V60 hydraulic Snow Blade/Pusher Combo Trencher Power Rake Tree Puller V60 Four-Cylinder Pipe Pallet Fork Grapple Grapples 5-3 V60 Two-Cylinder Pipe Pallet Fork Grapple V50 Scrap Grapple V60 Industrial Scrap Grapple V30 Compact Tractor Skeleton Rock Grapple V50 Skeleton Rock Grapple V60 heavy-duty Skeleton Rock Grapple V50 Industrial Skeleton Tine Grapple V40 One-Cylinder Skeleton Grapple V50 Skeleton Grapple V60 Root Rake Grapple V60 Large Capacity Skeleton Grapple V30 Compact Tractor Utility Fork Grapple V40 Utility Fork Grapple V50 heavy-duty Tine Fork Grapple V60 Industrial Tine Fork Grapple Bolt-on Grapple Rotary Cutters 4-6 V60 Industrial Rotary Cutter V50 Rotary Brush Cutter - Standard Deck V50 Rotary Brush Cutter - Floating Deck Brooms 7-8 Angle Broom Pick-Up Broom Snow 9-24 Snow Blower V60 V-Snow Blade V50 Light-Duty Angle Snow Blade V60 Angle Snow Blade V50 Low Profile Snow Pusher V60 Snow Pusher Landscaping U-Blade Stump Bucket Stump Bucket Grapple Dozer Blade - 6 Way Tiller Land Leveler Auger Drive Auger Bits Multi-Purpose Buckets 30 V50 Multi-Purpose Bucket V60 heavy-duty Multi-Purpose Bucket Rock Buckets 3 V30 Compact Tractor Skeleton Rock Bucket V50 Skeleton Rock Bucket V60 heavy-duty Skeleton Rock Bucket Agriculture Big Bale Grapple hay Bucket Grapple hay handling, Machine Pointed Spears hay handling, Forged Spears Rubber Manure Scraper Manure Slurry Bucket Feed Pusher high Dump Bucket V30 Compact Tractor Utility Fork V40 Utility Fork Pallet Forks V50 Walk-Through Pallet Fork V50 Rail Pallet Fork V60 heavy Rail Pallet Fork Buckets V50 Low Profile Dirt Bucket V60 Heavy-Duty Low Profile Dirt Bucket V40 Snow/Light Material Bucket V50 Medium-Duty Snow/Light Material Bucket V60 heavy-duty Snow/Light Material Bucket V50 Utility Bucket V60 heavy-duty Utility Bucket Bucket Edge Options i attachments@virnigmfg.com

5 HYDRAULIC SNOW BLADE/PUSHER COMBO Variable pusher, straight, and angled positions for optimal snow removal. Electric over hydraulic control allows independent angling of each wing. Entire blade angles separately from the wings for infinite plowing configurations. NEW Floating frame link maintains full blade contact when wings are angled, while also allowing down pressure when the wings are straight. Oscillation and adjustable cast skid shoes allows edge to follow uneven surfaces. Hydraulic crossover relief valve protects the attachment by absorbing shock and angling the entire blade if a curb or object is struck. Three blade sections with individual bottom trip edges utilizing eight total compression springs. Design allows 5 /2 of total wear on all bolt-on edges. Replaceable steel edge sections at pivot points to limit spillage. One of the electric control options listed below is required. HSBP32 32 $7,595 HSBP44 44 $7,795 HSBP56 56 $7,995 Basic Blade Configurations Blade and wings can also be positioned at any point between. Price includes steel cutting edges, two pairs of steel pivot sections, cylinders, fittings, Eaton hoses and couplers. MODEL HSBP32 HSBP44 HSBP56 Overall Blade Width (Inches) Blade Height (Inches) 3.0 Blade Angle (Degrees) +/- 30 Wing Angle (Degrees) +/- 60 Width at Full Angle Both Wings Open (Inches) Width at Full Angle One Wing Open (Inches) Width at Full Scoop (Inches) Moldboard Thickness (Inches) 0.9 Cutting Edge (Inches) Wing Cutting Edge (Inches) 5/8 x 8 Bolt-on /2 x 7 3/4 High Tensile Steel, Bolt-on Blade Oscillation (Degrees) +/- 4 Float Link Angle (Degrees) +/- 5 Approximate Weight (Pounds) Greater than 800 pounds HSBP ELECTRIC CONTROL OPTIONS MODEL DESCR. LOADER BRAND LIST ELC7 7 PIN BOBCAT $75 ELC8 8 PIN CAT $85 ELC8TRX 8 PIN TEREX /ASV, TAKEUCHI $85 ELC4 4 PIN CASE, NH, VOLVO, KUBOTA, JCB, GEHL, MUSTANG, TAKEUCHI $205 ELC4JD 4 PIN JOHN DEERE $205 ELC4CAT 4 PIN CAT $205 ELC4CATHF 4 PIN CAT HIGH FLOW $225 Compatible with Bobcat 7 pin CanBus electric control system. -7 pin connector, 8 pin connector, and 4 pin connector utilize in cab controls. MODEL DESCRIPTION LOADER BRAND LIST ELCACC 2 V ACCESSORY PLUG ALL, IF EQUIPPED $240 ELCBAT POWER SOURCE 2 ALL $290 Utilizes 2 volt accessory plug (cigarette lighter) in cab for power, includes magnetic box with switch for control. 2 Utilizes power source (battery) of loader for power, includes 2 volt accessory outlet, 2 volt accessory plug and magnetic box with switch for control.

6 TRENCHER 36 DIGGING DEPTH MODEL MAX GPM LIST TRN $4,75 TRN36-HF33 33 $5,575 TRN36-HF42 42 $5,990 SINGLE STANDARD CHAIN ITEM WIDTH LIST 038PP 6 $ PP 8 $ PP 0 $ PP 2 $,055 Direct drive Eaton motor reduces downtime, no chains or belts. Standard flow and high flow options available. Standard manual side-shift allows operator to dig near structures and other objects. Adjustable and removable auger clears loose soil from the trenching area. Standard crumber designed to keep the trench bottom clean and smooth. Chain also rotates in reverse to expel obstructions and chain tension can be quickly adjusted. Various chain configurations available for trenching in soft, hard, rocky, or frozen ground to get the job done quicker. Multiple digging depths and chain widths available. See below. Please specify MAKE and MODEL of skid loader when ordering Trenchers. Price includes fittings, Eaton hoses, and couplers. 48 DIGGING DEPTH MODEL MAX GPM LIST TRN $4,760 TRN48-HF33 33 $5,620 TRN48-HF42 42 $6,040 SINGLE STANDARD CHAIN ITEM WIDTH LIST 9866PP 6 $ PP 8 $, PP 0 $, PP 2 $, DIGGING DEPTH MODEL MAX GPM LIST TRN $4,805 TRN60-HF33 33 $5,665 TRN60-HF42 42 $6,085 SINGLE STANDARD CHAIN ITEM WIDTH LIST 9994PP 6 $, PP 8 $,255 NEW DOUBLE STANDARD CHAIN 2 ITEM WIDTH LIST 039PP 6 $ PP 8 $,05 043PP 0 $,40 044PP 2 $,250 DOUBLE STANDARD CHAIN 2 ITEM WIDTH LIST 9867PP 6 $, PP 8 $, PP 0 $, PP 2 $,590 DOUBLE STANDARD CHAIN 2 ITEM WIDTH LIST 9995PP 6 $,220 05PP 8 $,505 TERMINATOR CHAIN 3 ITEM WIDTH LIST 040PP 6 $, PP 8 $,545 TERMINATOR CHAIN 3 ITEM WIDTH LIST 9868PP 6 $, PP 8 $,945 TERMINATOR CHAIN 3 ITEM WIDTH LIST 9996PP 6 $2,30 052PP 8 $2,295 ROCK & FROST CHAIN 4 ITEM WIDTH LIST 04PP 6 $, PP 8 $,655 ROCK & FROST CHAIN 4 ITEM WIDTH LIST 9869PP 6 $, PP 8 $2,085 ROCK & FROST CHAIN 4 ITEM WIDTH LIST 9997PP 6 $2, PP 8 $2,450 Single Standard - cup tooth every other station. 2 Double Standard - cup tooth every station. 3 Terminator - 50% cup teeth, 50% shark-style teeth with embedded carbide inserts. 4 Rock and Frost - 50% cup teeth, 50% replaceable carbide tip rock teeth. Other chain configurations are available. Direct drive Eaton motor reduces downtime and is guarded from damage. MODEL TRN36 TRN48 TRN60 Dig Depth (Inches) Overall Width (Inches) 58.5 Frame Width (Inches) Overall Height (Inches) Overall Length (Inches) Side Shift Travel (Inches) 8.5 / 7.0 Auger Diameter (Inches) 7.25 Spoil Auger Discharge Reach (Inches) 20.0 Optimal Trenching Angle (Degrees) 60 Recommended Flow Rate attachments@virnigmfg.com Standard Flow up to 25 GPM / High Flow GPM Approximate Weight (Pounds) 35* 220* 285* *With Terminator Chain. Greater than 500 pounds 2

7 POWER RAKE Grade, rake, level and remove debris all with one attachment. Direct drive Eaton motor reduces downtime, no chains or belts. 206 Floating design ensures consistent down pressure for a smooth, even finish. Bi-directional drum works the soil in both directions for quick seedbed preparation. Manually angle the rake 25 degrees in either direction, Hydraulic Angle option available. MODEL LIST PWR72 $7,95 PWR90 $7,695 Standard Sandvik carbide tip teeth for long life in many soil conditions. Standard removable end plates help contain raked debris. Solid urethane filled tires eliminate costly interruptions from flats. Price includes fittings, Eaton hoses, and couplers. Direct drive Eaton motor reduces downtime and is guarded from damage. MODEL PWR72 PWR90 Raking Width (Inches) Raking Width at Full Angle (Inches) Overall Width (Inches) Overall Depth (Inches) 68.5 Overall Height (Inches) 27.5 Drum Diameter (Inches) 8.5 Number of Teeth 9 49 Float Link Angle (Degrees) 22 Rake Angle (Degrees) +/- 25 Approximate Weight (Pounds) Greater than 500 pounds Option: Hydraulic Angle WEIGHT PWR-HA ALL $, One-cylinder design using an electric control valve. 2 ½" bore, 8" stroke cylinder with ½" NitroSteel rod, ¼" cylinder and linkage pins. Hydraulic Angle requires one of the listed electric control options. HYDRAULIC ANGLE ELECTRIC CONTROL OPTIONS MODEL DESCR. LOADER BRAND LIST ELC7 7 PIN BOBCAT $75 ELC8 8 PIN CAT $85 ELC8TRX 8 PIN TEREX /ASV, TAKEUCHI $85 ELC4 4 PIN CASE, NH, VOLVO, KUBOTA, JCB, GEHL, MUSTANG, TAKEUCHI $205 ELC4JD 4 PIN JOHN DEERE $205 ELC4CAT 4 PIN CAT $205 ELC4CATHF 4 PIN CAT HIGH FLOW $225 Compatible with Bobcat 7 pin CanBus electric control system. -7 pin connector, 8 pin connector, and 4 pin connector utilize in cab controls. MODEL DESCRIPTION LOADER BRAND LIST ELCACC 2 V ACCESSORY PLUG ALL, IF EQUIPPED $240 ELCBAT POWER SOURCE 2 ALL $290 Utilizes 2 volt accessory plug (cigarette lighter) in cab for power, includes magnetic box with switch for control. 2 Utilizes power source (battery) of loader for power, includes 2 volt accessory outlet, 2 volt accessory plug and magnetic box with switch for control. 3

8 TREE PULLER Jaws open to.5 to quickly pull out trees and fence posts. Hard stop at tip keeps small space between teeth when fully closed. This allows even small trees to be pulled without shearing them off. Single hydraulic cylinder is protected from debris and other objects. NEW Price includes cylinder, fittings, Eaton hoses, and couplers. MODEL LIST TRP $,695 MODEL TRP Overall Width (Inches) 47.0 Overall Depth (Inches) 37.3 Overall Height (Inches) 22.0 Jaw Opening (Inches).5 Approximate Weight (Pounds) 462 Greater than 500 pounds

9 FOUR-CYLINDER PIPE PALLET FORK GRAPPLE Four-cylinder design applies consistent pressure to secure long pipe over uneven terrain. Functions by main arms moving first while smaller, secondary arms move after main arm cylinders are fully extended ˮ wide frame keeps long material stable. Standard Cascade ITA Class II forged tines rated at 6200 pounds. Two-cylinder independent clamp arms with /4 diameter hinge pins. 2 bore, 8 3/8 stroke cylinders featuring corrosion, dent and flake resistant /4 NitroSteel cylinder rods with /4 cylinder pins. Price includes cylinders, fittings, Eaton hoses, and couplers. TINES MADE MODEL LIST PPFG4-CYL $5,760 MODEL PPFG4-CYL Overall Width (Inches) 69.0 Overall Depth (Inches) 58.0 Overall Height, Closed (Inches) 44.0 Overall Height, Open (Inches) 65.0 Grapple Arm Width (Inches).38 Tine Length / Width / Thickness (Inches) 48.0 / 4.0 /.75 Lift Capacity (Pounds) 6200 Approximate Weight (Pounds) 0 Greater than 500 pounds TWO-CYLINDER PIPE PALLET FORK GRAPPLE Clamp arms open to near vertical for handling palleted material. 54ˮ wide frame keeps long material stable. Standard Cascade ITA Class II forged tines. Two-cylinder independent clamp arms with /4 diameter hinge pins. 2 bore, 8 3/8 stroke cylinders featuring corrosion, dent and flake resistant /4 NitroSteel cylinder rods with /4 cylinder pins. Price includes cylinders, fittings, Eaton hoses, and couplers. TINES MADE MODEL LIST PPFG248 $4,55 PPFG260 $4,720 MODEL PPFG248 PPFG260 Overall Width (Inches) 70.8 Overall Depth (Inches) Overall Height, Closed (Inches) 40.4 Overall Height, Open (Inches) 8.4 Grapple Arm Width (Inches) 8.3 Tine Length / Width / Thickness (Inches) 48.0 / 4.0 / / 4.0 /.5 Lift Capacity (Pounds) Approximate Weight (Pounds) Greater than 500 pounds 5

10 SCRAP GRAPPLE Replaceable Teflon coated bushings providing lubrication at all pivot locations. Bucket made of /4 Grade 50 steel and jaws made from /2 Grade 50 steel. Two /2 thick vertical braces inside bucket for added strength. 3/4 x 6" weld-on cutting edge with holes to accept optional edges. Two-cylinder independent grapple with 9/6 diameter hinge pins. 2 bore, 8 3/8 stroke cylinders featuring corrosion, dent and flake resistant /4 NitroSteel cylinder rods with /4 cylinder pins. Price includes cylinders, fittings, Eaton hoses, and couplers. GRAPPLES BOLT-ON EDGE INSTALLED SERRATED EDGE INSTALLED OPTIONAL CYLINDER GUARDS AVAILABLE SBG60 60 $3,495 SBG66 66 $3,555 SBG72 72 $3,635 SBG78 78 $3,75 BEV60A $225 BEV66A $240 BEV72A $270 BEV78A $300 SBEV60A $455 SBEV66A $475 SBEV72A $520 SBEV78A $565 MODEL LIST WEIGHT CYL-GRD $70 24 PAIR, INSTALLED MODEL SBG60 SBG66 SBG72 SBG78 Overall Bucket Width (Inches) Bucket Depth (Inches) 35.5 Bucket Height (Inches) 20.8 Grapple Jaw Opening (Inches) 37.8 Structural Wear Bars Under Bucket (/2 x 4 ) Approximate Weight (Pounds) Less than 2400 pounds INDUSTRIAL SCRAP GRAPPLE Replaceable Teflon coated bushings providing lubrication at all pivot locations. Bucket made of /4 Grade 50 steel and jaws made from /2 Grade 50 steel. Four /2ˮ thick vertical braces inside bucket for added strength. 3/4 x 6" weld-on cutting edge with holes to accept optional edges. Two-cylinder independent grapple with 9/6 diameter hinge pins. 2 bore, 8 3/8 stroke cylinders featuring corrosion, dent and flake resistant /4 NitroSteel cylinder rods with /4 cylinder pins. Price includes cylinders, fittings, Eaton hoses, and couplers. BOLT-ON EDGE INSTALLED SERRATED EDGE INSTALLED Extra Reinforcement Inside Bucket OPTIONAL CYLINDER GUARDS AVAILABLE ISG72 72 $4,40 ISG78 78 $4,280 ISG84 84 $4,430 ISG90 90 $4,680 BEV72A $270 BEV78A $300 BEV84A $35 BEV90A $325 SBEV72A $520 SBEV78A $565 SBEV84A $600 SBEV90A $645 MODEL LIST WEIGHT CYL-GRD $70 24 PAIR, INSTALLED MODEL ISG72 ISG78 ISG84 ISG90 Overall Bucket Width (Inches) Bucket Depth (Inches) 35.5 Bucket Height (Inches) 22.5 Grapple Jaw Opening (Inches) 40.0 Structural Wear Bars Under Bucket (/2 x 4 ) Approximate Weight (Pounds) Greater than 2400 pounds attachments@virnigmfg.com

11 COMPACT TRACTOR SKELETON ROCK GRAPPLE Raised ridge in center of tines and notch near tips secure rocks while digging. Fully gusseted tine tips for added strength. GRAPPLES One-cylinder grapple with " diameter hinge pins. /2 bore, 8" stroke cylinder featuring a corrosion, dent and flake resistant /8 NitroSteel cylinder rod and cylinder pins. Price includes cylinder, fittings, and Eaton hoses. Couplers NOT included. Universal skid steer mount only. SRGV48-CT 48 $,850 SRGV54-CT 54 $,875 SRGV60-CT 60 $,900 SRGV66-CT 66 $,925 SRGV72-CT 72 $,965 MODEL SRGV48-CT SRGV54-CT SRGV60-CT SRGV66-CT SRGV72-CT Overall Bucket Width (Inches) Bucket Depth (Inches) 32.3 Bucket Height (Inches) 8.4 Number of Tines (With Sides) Space Between Tines (Inches) 2.9 Tine Thickness (Inches) 0.375* Grapple Jaw Opening (Inches) 32. Approximate Weight (Pounds) Less than 500 pounds *Tine Material is Grade 80 Plate (80,000 PSI Minimum Yield Strength). SKELETON ROCK GRAPPLE Raised ridge in center of tines and notch near tips secure rocks while digging. Tines and side plates made of 3/8 Grade 80 steel and jaws made from /2 Grade 50 steel. Replaceable Teflon coated bushings providing lubrication at all pivot locations. Fully gusseted tine tips for added strength. Two-cylinder independent grapple with 9/6 diameter hinge pins. 2 bore, 8 3/8 stroke cylinders featuring corrosion, dent and flake resistant /4 NitroSteel cylinder rods with /4 cylinder pins. Price includes cylinders, fittings, Eaton hoses, and couplers. OPTIONAL CYLINDER GUARDS AVAILABLE MODEL LIST WEIGHT CYL-GRD $70 24 PAIR, INSTALLED SRGV60 60 $4,035 SRGV66 66 $4,070 SRGV72 72 $4,05 SRGV78 78 $4,45 SRGV84 84 $4,80 MODEL SRGV60 SRGV66 SRGV72 SRGV78 SRGV84 Overall Bucket Width (Inches) Bucket Depth (Inches) 42.9 Bucket Height (Inches) 2.5 Number of Tines (With Sides) Space Between Tines (Inches) 2.9 Tine Thickness (Inches) 0.375* Grapple Jaw Opening (Inches) 37.0 Approximate Weight (Pounds) Greater than 500 pounds *Tine Material is Grade 80 Plate (80,000 PSI Minimum Yield Strength). 7

12 HEAVY-DUTY SKELETON ROCK GRAPPLE Raised ridge in center of tines and notch near tips secure rocks while digging. Tines and side plates made of /2 Grade 80 steel and jaws made from /2 Grade 50 steel. Replaceable Teflon coated bushings providing lubrication at all pivot locations. Fully gusseted tine tips for added strength. Two-cylinder independent grapple with 9/6 diameter hinge pins. 2 bore, 8 3/8 stroke cylinders featuring corrosion, dent and flake resistant /4 NitroSteel cylinder rods with /4 cylinder pins. GRAPPLES Price includes cylinders, fittings, Eaton hoses, and couplers. OPTIONAL CYLINDER GUARDS AVAILABLE MODEL LIST WEIGHT CYL-GRD $70 24 PAIR, INSTALLED HSRGV72 72 $4,430 HSRGV78 78 $4,470 HSRGV84 84 $4,55 HSRGV90 90 $4,640 MODEL HSRGV72 HSRGV78 HSRGV84 HSRGV90 Overall Bucket Width (Inches) Bucket Depth (Inches) 42.9 Bucket Height (Inches) 2.5 Number of Tines (With Sides) Space Between Tines (Inches) Tine Thickness (Inches) 0.5* Grapple Jaw Opening (Inches) 37.0 Approximate Weight (Pounds) Greater than 800 pounds *Tine Material is Grade 80 Plate (80,000 PSI Minimum Yield Strength). INDUSTRIAL SKELETON TINE GRAPPLE Fully gusseted tines with no cross member allowing better material penetration without compromising strength. Replaceable Teflon coated bushings providing lubrication at all pivot locations. Tines made of /2 Grade 80 steel and jaws made from /2 Grade 50 steel. Two-cylinder independent grapple that reaches tine tips for fine work with 9/6 diameter hinge pins. 2 bore, 8 3/8 stroke cylinders featuring corrosion, dent and flake resistant /4 NitroSteel cylinder rods with /4 cylinder pins. Price includes cylinders, fittings, Eaton hoses, and couplers. OPTIONAL CYLINDER GUARDS AVAILABLE MODEL LIST WEIGHT CYL-GRD $70 24 PAIR, INSTALLED STG66 66 $3,885 STG72 72 $3,965 STG78 78 $4,050 STG84 84 $4,30 STG90 90 $4,290 MODEL STG66 STG72 STG78 STG84 STG90 Overall Bucket Width (Inches) Bucket Depth (Inches) 36.5 Bucket Height (Inches) 2. Number of Tines (With Sides) Space Between Tines (Inches) Tine Thickness (Inches) 0.5* Grapple Jaw Opening (Inches) 37.9 Approximate Weight (Pounds) *Tine Material is Grade 80 plate (80,000 PSI Minimum Yield Strength). attachments@virnigmfg.com Greater than 500 pounds 8

13 ONE-CYLINDER SKELETON GRAPPLE Replaceable Teflon coated bushings at hinge locations. Fully-gusseted tine tips for added strength. Open bottom and back gives excellent visibility GRAPPLES One-cylinder grapple with /4 diameter hinge pins. 2 bore, 8 3/8 stroke cylinders featuring corrosion, dent and flake resistant /4 NitroSteel cylinder rod with /4 cylinder pins. Price includes cylinder, fittings, Eaton hoses, and couplers. SG60 60 $2,870 SG66 66 $2,950 SG72 72 $3,030 SG78 78 $3,0 MODEL SG60 SG66 SG72 SG78 Overall Bucket Width (Inches) Bucket Depth (Inches) 39.9 Bucket Height (Inches) 2.3 Number of Tines (With Sides) Space Between Tines (Inches) 5.5 Tine Thickness (Inches) 0.5* Grapple Jaw Opening (Inches) 37.5 Approximate Weight (Pounds) Less than 2400 pounds *Tine Material is Grade 80 Plate (80,000 PSI Minimum Yield Strength). SKELETON GRAPPLE Hauling brush and logs, wider than the attachment, is easy with the open sided design. Replaceable Teflon coated bushings providing lubrication at all pivot locations. Tines made of /2 Grade 80 steel and jaws made of /2 Grade 50 steel. Two-cylinder independent grapple with 9/6 diameter hinge pins. 2 bore, 8 3/8 stroke cylinders featuring corrosion, dent and flake resistant /4 NitroSteel cylinder rods with /4 cylinder pins. Price includes cylinders, fittings, Eaton hoses, and couplers. OPTIONAL CYLINDER GUARDS AVAILABLE MODEL LIST WEIGHT CYL-GRD $70 24 PAIR, INSTALLED SGV60 60 $3,745 SGV66 66 $3,795 SGV72 72 $3,880 SGV78 78 $3,965 SGV84 84 $4,045 SGV90 90 $4,220 MODEL SGV60 SGV66 SGV72 SGV78 SGV84 SGV90 Overall Bucket Width (Inches) Bucket Depth (Inches) 39.9 Bucket Height (Inches) 2.3 Number of Tines (With Sides) Space Between Tines (Inches) 5.5 Tine Thickness (Inches) 0.5* Grapple Jaw Opening (Inches) 37.6 Approximate Weight (Pounds) Greater than 500 pounds *Tine Material is Grade 80 Plate (80,000 PSI Minimum Yield Strength). 9

14 ROOT RAKE GRAPPLE Two-cylinder grapple with one large, curved jaw. When open can be used for back dragging. Hard stop for fully open and closed positions preventing excess stress and damage to the cylinders. Replaceable Teflon coated bushings providing lubrication at all pivot locations. 2 /2 bore, 8 3/8 stroke cylinders featuring corrosion, dent and flake resistant /2 NitroSteel cylinder rods with /4 cylinder pins. Price includes cylinders, fittings, Eaton hoses, and couplers. GRAPPLES Cylinder Guards standard. RRG72 72 $5,20 RRG84 84 $5,385 MODEL RRG72 RRG84 Overall Width (Inches) Overall Depth (Inches) 3.6 Overall Height (Inches 29.7 Number of Teeth 7 8 Space Between Teeth (Inches) 9.8 Grapple Jaw Opening (Inches) 50.3 Grapple Jaw Thickness (Inches) 0.5* Rake Tine Thickness (Inches) 0.5* Approximate Weight (Pounds) Greater than 2400 pounds *Material is Grade 80 Plate (80,000 PSI Minimum Yield Strength). LARGE CAPACITY SKELETON GRAPPLE Two-cylinder independent grapple with 9/6 diameter hinge pins. Replaceable Teflon coated bushings providing lubrication at all pivot locations. 2 /2 bore, 8 3/8 stroke cylinders featuring corrosion, dent and flake resistant /2 NitroSteel cylinder rods with /4 cylinder pins. Price includes cylinders, fittings, Eaton hoses, and couplers. Cylinder Guards standard. LCG72 72 $5,330 LCG84 84 $5,635 MODEL LCG72 LCG84 Overall Bucket Width (Inches) Bucket Depth (Inches) 46.0 Bucket Height (Inches) 33.8 Number of Tines (With Sides) 0 2 Space Between Tines (Inches) Grapple Jaw Opening (Inches) 62.8 Outside Grapple Jaw Thickness (Inches) 0.5* Inside Grapple Jaw Thickness (Inches) 0.375** Bucket Tine Thickness (Inches) 0.5*** Approximate Weight (Pounds) *Jaw Material is Grade 50 Plate (50,000 PSI Minimum Yield Strength). **Jaw Material is Grade 50 Plate (50,000 PSI Minimum Yield Strength). ***Tine Material is Grade 80 Plate (80,000 PSI Minimum Yield Strength). Greater than 2400 pounds attachments@virnigmfg.com

15 COMPACT TRACTOR UTILITY FORK GRAPPLE Tines easily penetrate piles and low profile allows excellent visibility. Removable, replaceable /2 diameter tines. GRAPPLES One-cylinder grapple with " diameter hinge pins. /2 bore, 8 stroke cylinder featuring a corrosion, dent and flake resistant /8 NitroSteel cylinder rod and cylinder pins. Price includes cylinder, fittings, and Eaton hoses. Couplers NOT included. Universal skid steer mount only. UGV48-CT 48 $,835 UGV54-CT 54 $,895 UGV60-CT UGV66-CT $,930 $,980 UGV72-CT 72 $2,030 MODEL UGV48-CT UGV54-CT UGV60-CT UGV66-CT UGV72-CT Overall Bucket Width (Inches) Bucket Depth (Inches) 27.3 Bucket Height (Inches) 2.4 Number of Tines Space Between Tines (Inches) Tine Diameter (Inches).5* Grapple Jaw Opening (Inches) 37.5 Approximate Weight (Pounds) Less than 500 pounds *Tine Material is 045 CFSR Round (00,000 PSI Minimum Yield Strength). UTILITY FORK GRAPPLE Replaceable Teflon coated bushings at hinge locations. Handles a variety of materials including manure, brush, and debris. High tensile strength removable, replaceable 3/4 diameter tines. One-cylinder grapple with /4 diameter hinge pins. 2 bore, 8 3/8 stroke cylinders featuring corrosion, dent and flake resistant /4 NitroSteel cylinder rod with /4 cylinder pins. Price includes cylinder, fittings, Eaton hoses, and couplers. MGV60 60 $2,885 MGV66 66 $3,030 MGV72 72 $3,0 MGV78 78 $3,95 MODEL MGV60 MGV66 MGV72 MGV78 Overall Bucket Width (Inches) Bucket Depth (Inches) 33.5 Bucket Height (Inches) 2.5 Number of Tines Space Between Tines (Inches) Tine Diameter (Inches).75* Grapple Jaw Opening (Inches) 38.0 Approximate Weight (Pounds) Less than 2400 pounds *Tine Material is 045 CFSR Round (00,000 PSI Minimum Yield Strength).

16 HEAVY-DUTY TINE FORK GRAPPLE Replaceable Teflon coated bushings provide lubrication at all pivot locations. Two /2 thick vertical braces inside bucket for added strength. No cross member at tine tips allowing better material penetration. High tensile strength removable, replaceable 2 diameter tines. Two-cylinder independent grapple with 9/6 diameter hinge pins. 2 bore, 8 3/8 stroke cylinders featuring corrosion, dent and flake resistant /4 NitroSteel cylinder rods with /4 cylinder pins. GRAPPLES Known clearance issue on M-Series Bobcat loaders when Cylinder Guards are installed and jaws are open. OPTIONAL CYLINDER GUARDS AVAILABLE MODEL LIST WEIGHT CYL-GRD $70 24 PAIR, INSTALLED TBG $4,05 TBG $4,095 TBG $4,75 TBG $4,255 Price includes cylinders, fittings, Eaton hoses, and couplers. MODEL TBG260 TBG266 TBG272 TBG278 Overall Bucket Width (Inches) Bucket Depth (Inches) 37.0 Bucket Height (Inches) 2.8 Number of Tines Space Between Tines (Inches) Tine Diameter (Inches) 2.0* Grapple Jaw Opening (Inches) 39.5 Approximate Weight (Pounds) Less than 2400 pounds *Tine Material is 045 CFSR Round (00,000 PSI Minimum Yield Strength). INDUSTRIAL TINE FORK GRAPPLE Replaceable Teflon coated bushings provide lubrication at all pivot locations. Four /2 thick vertical braces inside bucket for added strength. No cross member at tine tips allowing better material penetration. High tensile strength removable, replaceable 2 /4 diameter tines. Two-cylinder independent grapple with 9/6 diameter hinge pins. 2 bore, 8 3/8 stroke cylinders featuring corrosion, dent and flake resistant /4 NitroSteel cylinder rods with /4 cylinder pins. Known clearance issue on M-Series Bobcat loaders when Cylinder Guards are installed and jaws are open. OPTIONAL CYLINDER GUARDS AVAILABLE MODEL LIST WEIGHT CYL-GRD $70 24 PAIR, INSTALLED ITG72 72 $4,700 ITG78 78 $4,820 ITG84 84 $4,930 ITG90 90 $5,35 Price includes cylinders, fittings, Eaton hoses, and couplers. MODEL ITG72 ITG78 ITG84 ITG90 Overall Bucket Width (Inches) Bucket Depth (Inches) 37.0 Bucket Height (Inches) 23.5 Number of Tines Space Between Tines (Inches) Tine Diameter (Inches) 2.25* Grapple Jaw Opening (Inches) 4.3 Approximate Weight (Pounds) Greater than 2400 pounds *Tine Material is 045 CFSR Round (00,000 PSI Minimum Yield Strength). attachments@virnigmfg.com

17 BOLT-ON GRAPPLE Telescoping mount system requires no cutting or welding to install. GRAPPLES One-cylinder grapple with " diameter hinge pins. /2 bore, 8" stroke cylinder featuring corrosion, dent and flake resistant /8 NitroSteel cylinder rod and " cylinder pin. Price includes cylinder, fittings, Eaton hoses, and couplers. NOTE: Not available for factory installation. BOGV $,350 MODEL *Mount tubes telescope to fit various width buckets. **Jaw opening varies with type of bucket and installation. BOGV6084 Number of Cylinders Overall Grapple Width (Inches) 52.0 Minimum Bucket Width (Inches) 60* Maximum Bucket Width (Inches) 84* Approximate Jaw Opening (Inches) 42** Approximate Weight (Pounds) 275 Less than 800 pounds 3

18 INDUSTRIAL ROTARY CUTTER Four-blade cutting system mounted to a large, heavy-duty, circular flywheel ensuring flywheel bounces off stumps rather than catching and damaging the motor. Able to cut down to the ground to limit tree regrowth. Standard dual hydraulic pressure relief valves with dynamic braking stops the lb. flywheel in 0-5 seconds. Double-sided, 5/8 x 5 blades can be flipped over to utilize second sharpened edges. CUTTERS Standard replaceable front and side skid shoes. Multiple motor options to match skid loader s hydraulic flow rate. Please specify MAKE and MODEL of skid loader when ordering Industrial Rotary Cutters. STANDARD FLOW LOADERS: GPM IRC $0,460 IRC $,05 IRC $,350 STANDARD FLOW CUTTERS INCLUDE 3/4" DIAMETER EATON HOSES AND COUPLERS. HIGH FLOW LOADERS: GPM IRC60-HF27 60 $0,740 IRC72-HF27 72 $,295 IRC78-HF27 78 $,630 HIGH FLOW LOADERS: GPM IRC60-HF32 60 $,55 IRC72-HF32 72 $,70 IRC78-HF32 78 $2,045 HIGH FLOW LOADERS: GPM IRC60-HF42 60 $,575 IRC72-HF42 72 IRC78-HF42 78 $2,30 $2,465 HIGH FLOW CUTTERS INCLUDE " DIAMETER EATON HOSES, CASE DRAIN AND COUPLERS. DO NOT OPERATE INDUSTRIAL ROTARY CUTTER WITHOUT A SHATTERPROOF CAB DOOR ON LOADER. MODEL IRC60 IRC72 IRC78 Cut Width (Inches) Overall Cutter Width (Inches) Overall Depth (Inches) Overall Height (Inches) 20. Deck Height (Inches) 8.3 Push Bar Height (Inches) 23.4 Minimum Cut Height (Inches) 2.3 Cutting Capacity, Diameter (Inches) 4-6 Recommended Flow Rate (GPM) Standard Flow, High Flow Approximate Weight (Pounds) STANDARD FLOW MODELS MODEL 20 GPM minimum 25 GPM maximum IRC ,86,483 IRC72-25,023 3,779 IRC78-25,942 4,928 MODEL HIGH FLOW MODELS 20 GPM minimum 27 GPM maximum IRC60-HF27 9,86 2,40 IRC72-HF27,023 4,882 IRC78-HF27,942 6,22 BLADE TIP SPEEDS (FPM) MODEL Greater than 2200 pounds HIGH FLOW MODELS 27 GPM minimum 32 GPM maximum IRC60-HF32 9,896,729 IRC72-HF32,875 4,074 IRC78-HF32 2,865 5,247 MODEL HIGH FLOW MODELS 32 GPM minimum 42 GPM maximum IRC60-HF42 9,757 2,807 IRC72-HF42,709 5,368 IRC78-HF42 2,685 6,649 Flow rates in gallons per minute (GPM) and blade tip speeds in feet per minute (FPM). attachments@virnigmfg.com

19 ROTARY BRUSH CUTTER - STANDARD DECK CUTTERS Three-blade cutting system, mounted to a large circular flywheel ensuring flywheel bounces off stumps rather than catching and damaging the motor. Standard dual hydraulic pressure relief valves with dynamic braking stops the lb. flywheel in 7-0 seconds. Standard replaceable front skid shoes. /2 x 4" single side, updraft blades. Multiple motor configurations to match loader s hydraulic system. Please specify MAKE and MODEL of skid loader when ordering Rotary Brush Cutters. DO NOT OPERATE ROTARY BRUSH CUTTER WITHOUT A SHATTERPROOF CAB DOOR ON LOADER. STANDARD FLOW LOADERS: 4-8 GPM Option: Swivel Casters RBV $5,795 RBV $6,050 RBV72-8 RBV $6,255 $6,505 STANDARD FLOW LOADERS: 8-25 GPM RBV $5,795 RBV $6,050 RBV $6,255 RBV $6,505 STANDARD FLOW CUTTERS INCLUDE 3/4" DIAMETER EATON HOSES AND COUPLERS. HIGH FLOW LOADERS: GPM RBV60-HF33 60 $6,550 RBV66-HF33 66 $6,800 RBV72-HF33 72 $7,05 RBV78-HF33 78 $7,335 HIGH FLOW LOADERS: GPM RBV60-HF42 60 $6,960 RBV66-HF42 66 $7,20 RBV72-HF42 72 $7,425 RBV78-HF42 78 $7,675 HIGH FLOW CUTTERS INCLUDE " DIAMETER EATON HOSES, CASE DRAIN AND COUPLERS. WEIGHT BCC ALL $620 8 MODEL RBV60 RBV66 RBV72 RBV78 Cut Width Overall Cutter Width (Inches) Cutter Depth (Inches) Cutter Height (Inches) 20.9 Deck Height (Inches) 8.8 Minimum Cut Height (Inches).8 Cutting Capacity, Diameter (Inches) 3.0 Recommended Flow Rate (GPM) 360 rotating swivel casters produce a better cut by creating a smoother ride and limiting gouging and scalping. 5 /2 diameter wheel with /4" greaseable pins. Sold as a pair and includes all required hardware Standard Flow, High Flow Approximate Weight (Pounds) 80* 325* 435* 540* Greater than 500 pounds *High flow motor options add approximately 70 pounds to model weight. MODEL 4 GPM Minimum 8 GPM Maximum RBV60-8 0,367 3,329 RBV66-8,404 4,662 RBV72-8 2,440 5,995 RBV78-8 3,477 7,328 MODEL 8 GPM Minimum 25 GPM Maximum RBV ,534 4,63 RBV66-25,588 6,094 RBV ,64 7,557 RBV ,695 9,020 BLADE TIP SPEEDS (FPM) MODEL 25 GPM Minimum Flow rates in gallons per minute (GPM) and blade tip speeds in feet per minute (FPM). 33 GPM Maximum RBV60-HF33,483 5,57 RBV66-HF33 2,630 6,672 RBV72-HF33 3,779 8,88 RBV78-HF33 4,927 9,704 MODEL 33 GPM Minimum 42 GPM Maximum RBV60-HF42 0,062 2,806 RBV66-HF42,068 4,087 RBV72-HF42 2,074 5,367 RBV78-HF42 3,08 6,648 Option: Rear Roller WEIGHT BCR60 60 $565 6 BCR66 66 $ BCR72 72 $ BCR78 78 $ Compacts chopped material and produces a better cut by limiting gouging and scalping. 5 /2 diameter roller with 2" diameter shaft and bearings. Includes all required hardware. 5

20 ROTARY BRUSH CUTTER - FLOATING DECK DO NOT OPERATE ROTARY BRUSH CUTTER WITHOUT A SHATTERPROOF CAB DOOR ON LOADER. Innovative floating deck provides a consistent cut on uneven terrain. Best when paired with rear roller and front casters. Deck allows 5/8 of travel. Can be secured in fixed position if desired. Three-blade cutting system, mounted to a large circular flywheel ensuring flywheel bounces off stumps rather than catching and damaging the motor. Standard dual hydraulic pressure relief valves with dynamic braking stops the lb. flywheel in 7-0 seconds. Standard replaceable front skid shoes. /2 x 4" single side, updraft blades. Multiple motor configurations to match loader s hydraulic system. Please specify MAKE and MODEL of skid loader when ordering Rotary Brush Cutters. CUTTERS STANDARD FLOW LOADERS: 4-8 GPM RBV60-8-F 60 $6,365 RBV66-8-F 66 $6,625 RBV72-8-F 72 $6,830 RBV78-8-F 78 $7,080 STANDARD FLOW LOADERS: 8-25 GPM RBV60-25-F 60 $6,365 RBV66-25-F 66 $6,625 RBV72-25-F 72 $6,830 RBV78-25-F 78 $7,080 STANDARD FLOW CUTTERS INCLUDE 3/4" DIAMETER EATON HOSES AND COUPLERS. MODEL RBV60-F RBV66-F RBV72-F RBV78-F Cut Width Overall Cutter Width (Inches) Cutter Depth (Inches) Cutter Height (Inches) 20.9 Deck Height (Inches) 8.8 Minimum Cut Height (Inches).8 Cutting Capacity, Diameter (Inches) 3.0 Recommended Flow Rate (GPM) 4-25 Standard Flow, High Flow Approximate Weight (Pounds) 430* 560* 680* 760* Greater than 500 pounds *High flow motor options add approximately 70 pounds to model weight. BLADE TIP SPEEDS (FPM) HIGH FLOW LOADERS: GPM RBV60-HF33-F 60 $7,25 RBV66-HF33-F 66 $7,375 RBV72-HF33-F 72 $7,585 RBV78-HF33-F 78 $7,90 HIGH FLOW LOADERS: GPM RBV60-HF42-F 60 $7,535 RBV66-HF42-F 66 $7,785 RBV72-HF42-F 72 $7,995 RBV78-HF42-F 78 $8,250 HIGH FLOW CUTTERS INCLUDE " DIAMETER EATON HOSES, CASE DRAIN AND COUPLERS. Option: Swivel Casters WEIGHT BCC ALL $620 8 MODEL 4 GPM Minimum 8 GPM Maximum RBV60-8-F 0,367 3,329 RBV66-8-F,404 4,662 RBV72-8-F 2,440 5,995 RBV78-8-F 3,477 7,328 MODEL 8 GPM Minimum 25 GPM Maximum RBV66-25-F 0,534 4,63 RBV66-25-F,588 6,094 RBV72-25-F 2,64 7,557 RBV78-25-F 3,695 9,020 Flow rates in gallons per minute (GPM) and blade tip speeds in feet per minute (FPM). 360 rotating swivel casters produce a better cut by creating a smoother ride and limiting gouging and scalping. 5 /2 diameter wheel with /4 greaseable pins. Sold as a pair and includes all required hardware. MODEL 25 GPM Minimum 33 GPM Maximum RBV60-HF33-F,483 5,57 RBV66-HF33-F 2,630 6,672 RBV72-HF33-F 3,779 8,88 RBV78-HF33-F 4,927 9,704 MODEL 33 GPM Minimum 42 GPM Maximum RBV60-HF42-F 0,062 2,806 RBV66-HF42-F,068 4,087 RBV72-HF42-F 2,074 5,367 RBV78-HF42-F 3,08 6,648 Option: Rear Roller WEIGHT BCR60-F 60 $ BCR66-F 66 $ BCR72-F 72 $ BCR78-F 78 $ Compacts chopped material and produces a better cut by limiting gouging and scalping. 5 /2 diameter roller with 2" diameter shaft and bearings. Includes all required hardware. attachments@virnigmfg.com

21 ANGLE BROOM Centering swing linkage with multiple pivot points better centers broom in front of loader when angled. Broom is standard with manual angle and 60 degree hood. See options below. BROOMS Hydraulic pressure relief valves provide system protection when operating broom in both directions. Direct drive design with replaceable drive components. Standard with 32" diameter poly/wire wafers. Easy exchange of wafers, no disconnecting of hydraulic hoses required. Price includes poly/wire wafer pack, Eaton hoses and couplers. Direct drive Eaton motor reduces downtime and is guarded from damage. VAB60 60 $5,350 VAB72 72 $5,540 VAB84 84 $5,725 VAB96 96 $5,95 MODEL VAB60 VAB72 VAB84 VAB96 Sweeping Width, Straight (Inches) Overall Width (Inches) Rotation Angle (Degrees) 27 Sweeping Width, Full Angle (Inches) Overall Width, Full Angle (Inches) Recommended Flow Rate (GPM) 5-25 Number of 32 Inch Diameter Wafers Approximate Weight (Pounds) Greater than 500 pounds Option: Hydraulic Angle WEIGHT VAB-HA ALL $, One-cylinder design using an electric control valve. 2 /2 bore, 8" stroke cylinder with /2 NitroSteel rod, /4 cylinder and linkage pins. Hydraulic Angle requires one of the listed electric control options. HYDRAULIC ANGLE ELECTRIC CONTROL OPTIONS MODEL DESCR. LOADER BRAND LIST ELC7 7 PIN BOBCAT $75 ELC8 8 PIN CAT $85 ELC8TRX 8 PIN TEREX /ASV, TAKEUCHI $85 ELC4 4 PIN CASE, NH, VOLVO, KUBOTA, JCB, GEHL, MUSTANG, TAKEUCHI $205 ELC4JD 4 PIN JOHN DEERE $205 ELC4CAT 4 PIN CAT $205 ELC4CATHF 4 PIN CAT HIGH FLOW $225 Compatible with Bobcat 7 pin CanBus electric control system. -7 pin connector, 8 pin connector, and 4 pin connector utilize in cab controls. MODEL DESCRIPTION LOADER BRAND LIST ELCACC 2 V ACCESSORY PLUG ALL, IF EQUIPPED $240 ELCBAT POWER SOURCE 2 ALL $290 Utilizes 2 volt accessory plug (cigarette lighter) in cab for power, includes magnetic box with switch for control. 2 Utilizes power source (battery) of loader for power, includes 2 volt accessory outlet, 2 volt accessory plug and magnetic box with switch for control. Option: Deflector WEIGHT ABDF60 60 $40 35 ABDF72 72 $50 40 ABDF84 84 $60 50 ABDF96 96 $75 55 Bolts onto broom using existing mount holes. Covers additional 30 degrees to limit flying material. Can be secured in storage position without removal. 7

22 PICK-UP BROOM Heavy-duty frame adjusts to account for bristle wear by utilizing pins with multiple holes. Easier and longer lasting than a bolt and nut. Reinforced bucket, similar to the Virnig V50 Dirt Bucket, results in long term performance. Hydraulic pressure relief valves provide system protection when operating broom in both directions. Direct drive design with replaceable drive components. Easy exchange of wafers, no disconnecting of hydraulic hoses required. BROOMS Standard with 5/8 x 6" reversible, replaceable bolt-on wear edge. Standard with 26" diameter poly/wire wafers; all poly wafers also available. Price includes Poly/Wire Wafer Pack, Eaton hoses and couplers. Direct drive Eaton motor reduces downtime and is guarded from damage. PUB60 60 $4,725 PUB72 72 $4,995 PUB84 84 $5,340 MODEL PUB60 PUB72 PUB84 Sweeping Width (Inches) Overall Width (Inches) Overall Height (Inches) 3.3 Overall Depth (Inches) 62.4 Recommended Flow Rate (GPM) 5-25 Number of 26 inch Diameter Wafers Approximate Weight (Pounds) Greater than 500 pounds* * with Water Kit installed is 800 pounds. Option: Water Kit 30-gallon tank provides 20-minutes of continuous operation. 2 volt, 2. GPM maximum pump with wiring harness. Bolt-on accessory for Pick-Up Broom only. Includes all required components. Recommended for loaders with operating capacities greater than 800 pounds. WEIGHT WK60 60 $, WK72 72 $,045 WK84 84 $,095 7 Option: Gutter Brush Increases cleaning width by 2". Easily adjustable hydraulic valve to control brush speed. Can be secured in storage position without removal. WEIGHT GB ALL $, attachments@virnigmfg.com

23 SNOW BLOWER Paddle-style auger efficiently chews through any type of snow. Wet and heavy, light and fluffy or hard and compacted. Partially-enclosed, four-blade fan and its alignment with the auger work together to keep more snow in the fan maximizing snow volume exiting the chute. SNOW 3/6 metal surrounding the fan reduces distortion from rocks and debris, resulting in longer blower life. Multiple Eaton motor options to match skid loader s hydraulic flow rate. Two-motor, direct drive design with hydraulic pressure relief protection. Electric over hydraulic deflector and chute control with 270 degree chute rotation. One of the electric control options listed below is required. Standard with 5/8 x 8" reversible, replaceable bolt-on wear edge. Standard adjustable and reversible poly skid shoes. Equivalent wear to steel. STANDARD FLOW LOADERS: 4-8 GPM VBW $7,065 VBW $7,270 VBW $7,475 STANDARD FLOW LOADERS: 8-25 GPM VBW $7,065 VBW $7,270 VBW $7,475 STANDARD FLOW BLOWERS INCLUDE 3/4" DIAMETER EATON HOSES AND COUPLERS. HIGH FLOW LOADERS: GPM VBW60-HF33 60 $8,850 VBW72-HF33 72 $9,055 VBW84-HF33 84 $9,260 HIGH FLOW LOADERS: GPM VBW60-HF42 60 $9,665 VBW72-HF42 72 $9,870 VBW84-HF42 84 $0,075 HIGH FLOW BLOWERS INCLUDE 3/4 DIAMETER EATON HOSES, CASE DRAIN AND COUPLERS. Please specify MAKE and MODEL of skid loader when ordering Snow Blowers. MODEL VBW60 VBW72 VBW84 Overall Width/Cut Width (Inches) Overall Depth (Inches) 47.9 Cut Height (Inches) 28.0 Max Height, Varies w/ Deflector Position (Inches) 65.0 Fan Diameter (Inches) 24.0 Fan Depth (Inches) 8.0 Auger Diameter (Inches) 8.0 Throwing Distance (Feet) Recommended Flow Rate (GPM) 4-25 Standard Flow, High Flow Approximate Weight (Pounds) 40* 220* 300* *High Flow motor options add approximately 75 pounds to model weight. Greater than 500 pounds SNOW BLOWER ELECTRIC CONTROL OPTIONS MODEL DESCR. LOADER BRAND LIST ELC7 7 PIN BOBCAT $75 ELC8 8 PIN CAT $85 ELC8TRX 8 PIN TEREX /ASV, TAKEUCHI $85 ELC4 4 PIN CASE, NH, VOLVO, KUBOTA, JCB, GEHL, MUSTANG, TAKEUCHI $205 ELC4JD 4 PIN JOHN DEERE $205 ELC4CAT 4 PIN CAT $205 ELC4CATHF 4 PIN CAT HIGH FLOW $225 Compatible with Bobcat 7 pin CanBus electric control system. -7 pin connector, 8 pin connector, and 4 pin connector utilize in cab controls. MODEL DESCRIPTION LOADER BRAND LIST ELCACC-SB 2 V ACCESSORY PLUG ALL, IF EQUIPPED $265 ELCBAT-SB POWER SOURCE 2 ALL $35 Utilizes 2 volt accessory plug (cigarette lighter) in cab for power, includes magnetic box with switch for control. 2 Utilizes power source (battery) of loader for power, includes 2 volt accessory outlet, 2 volt accessory plug and magnetic box with switch for control. 9

24 V-SNOW BLADE Hydraulic only control makes variable V, scoop, straight, and angled positions. Floating frame link maintains full blade contact in scoop and V positions, while allowing full down pressure in straight and angled positions. Oscillation and adjustable cast skid shoes allows edge to follow uneven surfaces. Trip edge containing four compression springs and hinge points. SBV48 has two compression springs and four hinge points. Two-cylinder hydraulic angle with 9/6 diameter pivot pin. 2 bore, 8 3/8 stroke cylinders featuring corrosion, dent and flake resistant /4 NitroSteel cylinder rods and /4 cylinder pins. Replaceable steel center edge sections to limit spillage. Design allows 5 /2 of total wear on the 5/8 x 8 reversible, replaceable bolt-on wear edge. Price includes steel cutting edge, two pairs of steel center sections, cylinders, fittings, Eaton hoses and couplers. SNOW RUBBER EDGE INSTALLED SBV48 48 $4,505 SBV60 60 $4,595 SBV72 72 $4,620 SBV84 84 $4,720 SBV96 96 $4,820 SBV08 08 $4,95 SBV20 20 $5,075 RUV48 $60 RUV60 $65 RUV72 $70 RUV84 $80 RUV96 $95 RUV08 $275 RUV20 $300 List price addition. Replaces steel edge. Option: Rubber Edge List price addition for Rubber Edge. Replaces standard steel cutting edge. /2 x 0 reversible, replaceable rubber edge allows 7 of total wear. For Virnig V-Snow Blades only. MODEL SBV48 SBV60 SBV72 SBV84 SBV96 SBV08 SBV20 Overall Blade Width (Inches) Blade Height (Inches) 3.0 Blade Angle (Degrees) +/- 30 Width at Full Angle (Inches) Width at Full Scoop (Inches) Width at Full V (Inches) Moldboard Thickness (Inches) 0.9 Cutting Edge (Inches) 5/8 x 8 Bolt-on Center Edge (Inches) /2 High Tensile Steel, Bolt-on Blade Oscillation (Degrees) +/- 4 Float Link Angle (Degrees) +/- 5 Approximate Weight (Pounds)* Greater than 500 pounds *Weight with Steel Edge installed. Option: Pin-on Wings For new Virnig V-Snow Blades with factory added mounted holes. Two, 2 wide wings angled 20 forward from moldboard to increase the blade s width by 2 3/4. Brackets bolt to the snow blade moldboard and two pins mount each wing to the bracket. Option: Retro Pin-on Wings For Virnig V-Snow Blades without factory added mounting holes. Two, 2 wide wings angled 20 forward from moldboard to increase the blade s width by 2 3/4. Install by drilling holes in the moldboard or by directly welding brackets to the moldboard. WEIGHT WGS 2 $ WEIGHT WGS-R 2 $ attachments@virnigmfg.com