DELIVERY STARTING POINT. Price Per Loaded Mile. Minimum Delivery Charge

Transcription

1 SEQ. # MINNESOTA PRICING PAGES (Typed Responses Required) December 2016 Price quote for: Aftermarket Tractor/Skidsteer Attachments Vendor Name: Contact Person: Street Address: P.O. Box: City, State, Zip Phone #: Toll Free #: Fax #: Address: Virnig Manufacturing, Inc. Bryan Virnig 101 Gateway Drive NE Rice, MN, Manufacturer's Name: Attachment Description: Warranty Term (months, years): Percent Discount (%) to be applied to Price List: Date & I.D. of the Price List: 2.0 Delivery Charges: (SEE SPECIAL TERMS AND CONDITIONS) 3.0 Price for additional Service Manual: Price for additional Parts Manual: DELIVERY STARTING POINT (City) (State & Zip Code) Price Per Loaded Mile Minimum Delivery Charge Virnig Manufacturing, Inc. Skidsteer and Compact Tractor 1 year 17% Virnig 2017 Price List - 1/1/2017 NO FLAT RATE ALLOWED Rice MN, $1.50 $ Free Free 4.0 Installation Services - Per Hour (Shop Labor Rate) $ Installation services may be requested on an "as needed" basis. (See Special Terms and Conditons) Aftermarket Tractor/Skidsteer Attachments

2 RESPONDER'S NAME: Bryan Virnig - Virnig Manufacturing, Inc. SWIFT EVENT NUMBER: AFTERMARKET TRACTOR/SKIDSTEER ATTACHMENTS, T-632(5) Following is a list of all distributors that are authorized to sell the equipment listed above. All distributors will provide the required insurance certificates to the State as outlined in the Swift Event Special Terms and Conditions before any State Contract may be executed. The SWIFT Vendor number must be complete and include the vendor location number and the vendor location number, i.e., COMPANY SWIFT VENDOR COMPANY PHONE CONTACT NAME & LOCATION NO. STREET ADDRESS, CITY STATE / ZIP NUMBER NAME Arnold's Equipment North Star Road, Alden MN / Brad Wermedal Arnold's Equipment Lindbergh Trail, Glencoe MN / Josh Miller Arnold's Equipment State Hwy 55 E, Kimball MN / Al Schramm Arnold's Equipment Howard Drive, North Mankato MN / Christin Engebretson Arnold's Equipment Quail Road NE, Sauk Rapids MN / Wayne Henrichs / Kevin Boyd Arnold's Equipment Industrial Drive, St. Martin MN / Jon Zaske Arnold's Equipment Hwy 71 South, Willmar MN / Jon Zaske Crawford Equipment NW Hwy 95, Cambridge MN / Jon Ferris Lano Equipment Highway 10, Anoka MN / Scott Fahey Midwest Machinery Hwy 212, Glencoe MN / Ask for Gov't Sales Rep Midwest Machinery North Franklin St, Glenwood MN / Ask for Gov't Sales Rep Midwest Machinery th Ave NE, Sauk Rapids MN / Ask for Gov't Sales Rep Midwest Machinery State Hwy 27 E, Alexandria MN / Ask for Gov't Sales Rep Midwest Machinery Keats Ave SW, Howard Lake MN / Ask for Gov't Sales Rep Midwest Machinery Baptist Church Rd, Princeton MN / Ask for Gov't Sales Rep Midwest Machinery Lake Avenue S, Paynesville MN / Ask for Gov't Sales Rep Midwest Machinery Centre Street, Sauk Centre MN / Ask for Gov't Sales Rep Midwest Machinery Hwy 27 E, Little Falls MN / Ask for Gov't Sales Rep Midwest Machinery Hwy 10 W, Wadena MN / Ask for Gov't Sales Rep Midwest Machinery nd St NW, Aitkin MN / Ask for Gov't Sales Rep Midwest Machinery Foley Road, Baxter MN / Ask for Gov't Sales Rep Midwest Machinery County Rd 20, Stewart MN / Ask for Gov't Sales Rep Niebur Implement East 240th Street, Hastings MN / Dan Beissel RDO Equipment Co DuPont Avenue S, Burnsville MN / Jesse Miller RDO Equipment Co Lorray Dr, North Mankato MN / Jesse Miller RDO Equipment Co th Ave NW, Rochester MN / Jesse Miller RDO Equipment Co E College Dr, Marshall MN / Jesse Miller RDO Equipment Co Highway 10 NW, Sauk Rapids MN / Jesse Miller RDO Equipment Co Main Ave SE, Moorhead MN / Jesse Miller

3 GRAPPLES V50 & V60 SCRAP GRAPPLE V40 & V50 SKELETON GRAPPLE DISCOUNT STRUCTURE FREIGhT PROGRAM WARRANTy PAGE78 PAGE79 PAGE80 V40-V60 SKELETON ROCK GRAPPLE V50 SKELETON TINE GRAPPLE V40-V60 FORK GRAPPLE TABLE OF CONTENTS V60 ROOT RAKE GRAPPLE PAGE1 PAGE2 PAGE3,4 PAGE4 V60 LARGE CAPACITy SKELETON GRAPPLE V60 4-CyL PIPE PALLET FORK GRAPPLE V60 2-CyL PIPE PALLET FORK GRAPPLE PAGE7 PAGE9 PAGE10 PAGE11 PAGE12 BRUSh CUTTERS BRUSh CUTTER COMPARISON GUIDE V40 STANDARD DECK BRUSh CUTTER BOLT-ON GRAPPLE V50 STANDARD DECK BRUSh CUTTER V50 FLOATING DECK BRUSh CUTTER PAGE5,6 V40 OPEN FRONT DECK BRUSh CUTTER PAGE13,14 PAGE15 PAGE17 PAGE19 PAGE21 V50 OPEN FRONT DECK BRUSh CUTTER V60 INDUSTRIAL ROTARy CUTTER BROOMS ANGLE BROOM PICK-UP BROOM PAGE23 PAGE25 PAGE27 PAGE29 LANDSCAPING TRENChER POWER RAKE TREE PULLER LAND LEVELER DOzER BLADE - 6 WAy PAGE31 PAGE33 PAGE35 PAGE35 PAGE36 STUMP BUCKET STUMP BUCKET GRAPPLE U-BLADE TILLER TREE BOOM PAGE37 PAGE37 PAGE38 PAGE38 PAGE39 V40 AUGER DRIVE V50 AUGER DRIVE AUGER BITS ROCK BITS AUGER ExTENSIONS PAGE41 AUGER ADAPTERS PAGE40 PAGE40 PAGE 41 PAGE41 PAGE 41 i virnigmfg.com attachments@virnigmfg.com

4 AgriCuLTurE discount STruCTurE FrEighT program WArrANTy page78 page79 page80 Big BALE grapple hay BuCkET grapple high dump BuCkET hay handling, machine pointed SpEArS hay handling, FOrgEd SpEArS rubber manure SCrApEr page42 page47 manure SLurry BuCkET pallet FOrkS V50 WALk-ThrOugh pallet FOrk V50 rail pallet FOrk page42 page43 page45 page46 page47 FEEd pusher page48 V60 rail pallet FOrk V40 utility FOrk 2017 pallet FOrk program page48 BuCkETS V50 & V60 multipurpose BuCkET (4-iN-1) TABLE OF CONTENTS page49 page49 page50 page50 page51,52 BuCkETS (cont.) V40-V60 SkELETON rock BuCkET V50 & V60 utility BuCkET V40-V60 LOW profile dirt BuCkET V40-V60 SNOW/LighT material BuCkET BuCkET EdgE OpTiONS page59,60 SNOW page53 page54 page55-57 page58 V50 SNOW BLOWEr V60 SNOW BLOWEr V50 ANgLE SNOW BLAdE V60 ANgLE SNOW BLAdE universal quick TACh plate page60 page77 V60 V-SNOW BLAdE page61 page63 page65 page66 page67 V60 hydraulic SNOW BLAdE/puShEr V50 LOW profile SNOW pusher V60 SNOW pusher V60 STEEL EdgE SNOW pusher SNOW BLAdE replacement parts COmpACT TrACTOr V30 CT SkELETON rock BuCkET page69 page71 V30 CT SkELETON rock grapple page72 V30 CT utility FOrk page73 V30 CT utility FOrk grapple page77 discount STruCTurE page78 FrEighT program page79 page75 page75 page76 page76 WArrANTy page 80 virnigmfg.com ii

5 ABOuT VirNig manufacturing Located in the heart of Central Minnesota, Virnig Manufacturing has been designing and producing skid steer loader attachments for over 27 years. From engineering and cutting raw materials to machining, welding and painting the finished product, all steps of the manufacturing process are done in-house. Today, the family owned and operated business has grown into a premium attachment manufacturer supplying North America and beyond. high STrENgTh STEEL Virnig builds attachments that outlast the competition by coupling high yield strength plate steel and round stock with more welds and better reinforcement. At minimum, Grade 50 steel plate is employed for all attachments. For high stress areas Grade 80 plate is utilized. All Virnig bucket tines, hinge pins and cylinder pins are made from 1045 Cold Finished Stress Relieved (CFSR) round stock. premium COmpONENTS right-sized motors WiTh relief VALVES Virnig offers loader specific hydraulic motor configurations to ensure optimum performance and longevity. Inferior or overworked motors may save money upfront, but pay it back in performance loss and shortened life. proper diameter hoses The hydraulic motor and loader run more efficiently with correct diameter hoses. Smaller hoses are less expensive, but limit performance through pressure loss and heat build up. Also, hose wrap is utilized in critical areas for operator safety. COATiNgS ON CyLiNdErS, WEAr parts ANd pins All cylinder rods use NitroSteel, which features a dent and flake proof protective layer chemically bonded with the steel rather than a basic coating. All pins, washers and spacers are zinc plated furthering the corrosion resistance of the attachment. iii virnigmfg.com attachments@virnigmfg.com

6 LASEr LASEr CuT CuT precision precision Virnig uses laser cutting technology to ensure every steel part is created with a high level of precision. Laser cutting offers tighter tolerances and a smaller cut width than other conventional cutting methods, which delivers better quality and unbeatable value. AuTOmATEd WELdiNg TEChNOLOgy Robots ensure consistent weld quality and increase output for a shorter lead team. By integrating the latest manufacturing technologies and using top-of-the-line materials, Virnig has distinguished themselves as a cut above the rest in the manufacturing industry. powder COATEd protection Powder coating provides superior resistance to corrosion, scratching and fading for a more attractive and durable finish. The entire process reduces the environmental footprint through the elimination of hazardous chemicals, a 96% reduction in water usage, and minimizing waste by reusing over-sprayed powder. in STOCk parts WiTh quick TurNArOuNd Over 40,000 attachment parts in stock and ready to ship the same day the order is received. Fabricated parts are available with a reasonable lead time. Several shipping options are available to provide timely delivery. virnigmfg.com attachments@virnigmfg.com iv

7 SOLuTiON OriENTEd Some call it low-pressure; Virnig calls it common sense. Customer relationships are valued and the sales team is dedicated to finding solutions. SErViCE + SuppOrT A proactive customer service team is prepared to assist with anything. To this team of experienced professionals help is more than a document, it is a conversation. 1-yEAr WArrANTy Virnig warrants its products and components to be free of defects for 1 year from purchase. EmpLOyEE LONgEViTy Virnig s most valuable resource is its experienced, professional staff totaling more than 400 years of experience within the company. CONTiNuEd investment Since 2010, Virnig added two laser cutters, an automated powder coat paint system, 28,000 square feet to its facility, and three robot welders. v

8 introducing VirNig S NEW NAmiNg SySTEm Virnig Manufacturing is excited to introduce a new naming system for quick product comparison. There are four identifiers, V30, V40, V50, and V60, for items that have comparable counterparts within the line of attachments. Items without a comparison did not get a number. A higher number has different meanings across products. There are a variety of factors including steel thickness, amount of bracing, capacity, or simply the number of options to specialize the attachment. If questioning whether a product is suitable for a particular loader or application it is still important to check the specs or contact Virnig. S E R I E S S E R I E S S E R I E S S E R I E S vi

9 grapples V50 SCrAp grapple 37.8 Two-cylinder independent grapple with ¼ Grade 50 solid bottom scoops up bulky material. Two 1 2ˮ thick vertical braces inside bucket for added strength. 2 bore, stroke cylinders featuring corrosion, dent and flake resistant NitroSteel cylinder rods. Greasable 1 ¼ diameter cylinder pins and diameter hinge pins. Teflon coated bushings provide lubrication at all pivot locations. ¾" x 6" weld-on cutting edge with holes to accept optional edges. OpTiON: CyLiNdEr guards Protect cylinders from damage. Pair, installed. model LiST WEighT CYL-GRD $ SBG60 60 $3,565 SBG66 66 $3,630 SBG72 72 $3,710 SBG78 78 $3,790 Price includes cylinders, fittings, couplers, and eaton hoses. model SBg60 SBg66 SBg72 SBg78 Overall Bucket width (Inches) Bucket Depth (Inches) 35.5 Bucket height (Inches) 20.8 Grapple jaw Opening (Inches) 37.8 Structural wear Bars under Bucket (1/2 x 4 ) Approximate weight (Pounds) BOLT-ON EdgE installed item LiST BeV60A $235 BeV66A $250 BeV72A $280 BeV78A $310 Less than 2400 pounds SErrATEd EdgE installed item LiST SBeV60A $455 SBeV66A $495 SBeV72A $540 SBeV78A $585 V60 SCrAp grapple 40.0 Two-cylinder independent grapple with ¼ Grade 50 solid bottom scoops up bulky material. Four 1 2ˮ thick vertical braces and a welded brace plate inside the bucket for added strength. 2 bore, stroke cylinders featuring corrosion, dent and flake resistant NitroSteel cylinder rods. Greasable 1 ¼ diameter cylinder pins and diameter hinge pins. Teflon coated bushings provide lubrication at all pivot locations. ¾ x 6 weld-on cutting edge with holes to accept optional edges. BOLT-ON EdgE installed SErrATEd EdgE installed extra Reinforcement Inside Bucket ISG72 72 $4,225 ISG78 78 $4,370 ISG84 84 $4,520 ISG90 90 $4,775 Price includes cylinders, fittings, couplers, and eaton hoses. item LiST BeV72A $280 BeV78A $310 BeV84A $330 BeV90A $340 item LiST SBeV72A $540 SBeV78A $585 SBeV84A $625 SBeV90A $665 OpTiON: CyLiNdEr guards Protect cylinders from damage. Pair, installed. model LiST WEighT CYL-GRD $ model isg72 isg78 isg84 isg90 Overall Bucket width (Inches) Bucket Depth (Inches) 35.5 Bucket height (Inches) 22.5 Grapple jaw Opening (Inches) 40.0 Structural wear Bars under Bucket (1/2 x 4 ) Approximate weight (Pounds) Greater than 2400 pounds 1 virnigmfg.com attachments@virnigmfg.com PRICeS effective 01/01/17. ALL INFO SuBjeCT TO ChANGe without NOTICe.

10 V40 SkELETON grapple 35.2 Two-cylinder independent grapple with an open sided design for hauling brush and logs. e very tine is constructed from one piece of 1 2ˮ Grade 50 steel, from tip to top brace, to add rigidity. Open bottom gives excellent visibility and allows dirt to fall through the 8 tine spacing. 2 bore, stroke cylinders featuring corrosion, dent and flake resistant NitroSteel cylinder rods. Greasable 1 ¼ diameter cylinder pins and hinge pins. Teflon coated bushings provide lubrication at jaw hinge. grapples BSGV66 66 $2,700 BSGV72 72 $2,790 BSGV84 84 $2,900 Price includes cylinders, fittings, couplers, and eaton hoses. OpTiON: CyLiNdEr guards Protect cylinders from damage. Pair, installed. model LiST WEighT CYL-GRD $ model BSgV66 BSgV72 BSgV84 Overall Bucket width (Inches) Bucket Depth (Inches) 36.9 Bucket height (Inches) 20.3 Number of Tines (with Sides) Space Between Tines (Inches) Bucket Tine Thickness (Inches) 0.5* Grapple jaw Opening (Inches) 35.2 Approximate weight (Pounds) Less than 2400 pounds *Tine Material is Grade 50 Plate (50,000 Minimum Yield Strength). V50 SkELETON grapple 37.6 Two-cylinder independent grapple with an open sided design for hauling brush and logs. e very tine is constructed from one piece of 1 2ˮ Grade 80 steel, from tip to top brace, to add rigidity. Open bottom gives excellent visibility and allows dirt to fall through the 5 1 2ˮ tine spacing. 2 bore, stroke cylinders featuring corrosion, dent and flake resistant NitroSteel cylinder rods. Greasable 1 ¼ diameter cylinder pins and diameter hinge pins. Teflon coated bushings provide lubrication at all pivot locations. SGV60 60 $3,820 SGV66 66 $3,875 SGV72 72 $3,960 SGV78 78 $4,045 SGV84 84 $4,130 SGV90 90 $4,305 Price includes cylinders, fittings, couplers, and eaton hoses. OpTiON: CyLiNdEr guards Protect cylinders from damage. Pair, installed. model LiST WEighT CYL-GRD $ model SgV60 SgV66 SgV72 SgV78 SgV84 SgV90 Overall Bucket width (Inches) Bucket Depth (Inches) 39.9 Bucket height (Inches) 21.3 Number of Tines (with Sides) Space Between Tines (Inches) 5.5 Tine Thickness (Inches) 0.5* Grapple jaw Opening (Inches) 37.6 Approximate weight (Pounds) Greater than 1500 pounds *Tine Material is Grade 80 Plate (80,000 PSI Minimum Yield Strength). virnigmfg.com attachments@virnigmfg.com

11 V40 SkELETON rock grapple Two-cylinder independent grapple with ~3 tine spacing designed to pick rocks and debris and leave dirt behind. e very other tine is constructed of one piece of steel, from tip to top brace, to add rigidity. every tine is made from 3 8 Grade 50 steel. grapples 35.2 Raised ridge in center of tines (rock dam) and notch near tips secure rocks while digging. 2 bore, stroke cylinders featuring corrosion, dent and flake resistant NitroSteel cylinder rods. Greasable 1 ¼ diameter cylinder pins and hinge pins. Teflon coated bushings provide lubrication at jaw hinge. BSRGV66 66 $3,130 BSRGV72 72 $3,235 BSRGV84 84 $3,415 Price includes cylinders, fittings, couplers, and eaton hoses. OpTiON: CyLiNdEr guards Protect cylinders from damage. Pair, installed. model LiST WEighT CYL-GRD $ model BSrgV66 BSrgV72 BSrgV84 Overall Bucket width (Inches) Bucket Depth (Inches) 39.9 Bucket height (Inches) 20.0 Number of Tines (with Sides) Space Between Tines (Inches) 2.9 Tine & Side Plate Thickness (Inches) 0.375* Grapple jaw Opening (Inches) 35.2 Approximate weight (Pounds) Less than 2400 pounds *Tine and Side Plate Material is Grade 50 Plate (50,000 Minimum Yield Strength). V50 SkELETON rock grapple 37.0 Two-cylinder independent grapple with ~3 tine spacing designed to pick rocks and debris and leave dirt behind. e very tine is constructed from one piece of 3 8 Grade 80 steel, from tip to top brace, to add rigidity. Raised ridge in center of tines (rock dam) and notch near tips secure rocks while digging. 2 bore, stroke cylinders featuring corrosion, dent and flake resistant NitroSteel cylinder rods. Greasable 1 ¼ diameter cylinder pins and diameter hinge pins. Teflon coated bushings provide lubrication at all pivot locations. SRGV60 60 $4,120 SRGV66 66 $4,155 SRGV72 72 $4,190 SRGV78 78 $4,230 SRGV84 84 $4,265 Price includes cylinders, fittings, couplers, and eaton hoses. 3 OpTiON: CyLiNdEr guards Protect cylinders from damage. Pair, installed. model LiST WEighT CYL-GRD $ model SrgV60 SrgV66 SrgV72 SrgV78 SrgV84 Overall Bucket width (Inches) Bucket Depth (Inches) 42.9 Bucket height (Inches) 21.5 Number of Tines (with Sides) Space Between Tines (Inches) 2.9 Tine & Side Plate Thickness (Inches) 0.375* Grapple jaw Opening (Inches) 37.0 Approximate weight (Pounds) Greater than 1500 pounds *Tine and Side Plate Material is Grade 80 Plate (80,000 PSI Minimum Yield Strength). virnigmfg.com attachments@virnigmfg.com PRICeS effective 01/01/17. ALL INFO SuBjeCT TO ChANGe without NOTICe.

12 V60 SkELETON rock grapple Two-cylinder independent grapple with ~4 tine spacing designed to pick rocks and debris and leave dirt behind e very tine is constructed from one piece of 1 2ˮ Grade 80 steel, from tip to top brace, to add rigidity. Raised ridge in center of tines (rock dam) and notch near tips secure rocks while digging. 2 bore, stroke cylinders featuring corrosion, dent and flake resistant NitroSteel cylinder rods. Greasable 1 ¼ diameter cylinder pins and diameter hinge pins. Teflon coated bushings provide lubrication at all pivot locations. grapples hsrgv72 72 $4,515 hsrgv78 78 $4,555 hsrgv84 84 $4,605 hsrgv90 90 $4,730 Price includes cylinders, fittings, couplers, and eaton hoses. OpTiON: CyLiNdEr guards Protect cylinders from damage. Pair, installed. model LiST WEighT CYL-GRD $ model hsrgv72 hsrgv78 hsrgv84 hsrgv90 Overall Bucket width (Inches) Bucket Depth (Inches) 42.9 Bucket height (Inches) 21.5 Number of Tines (with Sides) Space Between Tines (Inches) Tine Thickness (Inches) 0.5* Grapple jaw Opening (Inches) 37.0 Approximate weight (Pounds) Greater than 1800 pounds *Tine Material is Grade 80 Plate (80,000 PSI Minimum Yield Strength). V50 SkELETON TiNE grapple Two-cylinder independent grapple that reaches tine tips for fine work. e very tine is constructed from one piece of 1 2ˮ Grade 80 steel, from tip to top brace, to add rigidity Fully gusseted tines with no cross member allowing better material penetration without compromising strength. 2 bore, stroke cylinders featuring corrosion, dent and flake resistant NitroSteel cylinder rods. Greasable 1 ¼ diameter cylinder pins and diameter hinge pins. Teflon coated bushings provide lubrication at all pivot locations. STG66 66 $3,965 STG72 72 $4,045 STG78 78 $4,135 STG84 84 $4,215 STG90 90 $4,380 Price includes cylinders, fittings, couplers, and eaton hoses. OpTiON: CyLiNdEr guards Protect cylinders from damage. Pair, installed. model LiST WEighT CYL-GRD $ model STg66 STg72 STg78 STg84 STg90 Overall Bucket width (Inches) Bucket Depth (Inches) 36.5 Bucket height (Inches) 21.1 Number of Tines (with Sides) Space Between Tines (Inches) Tine Thickness (Inches) 0.5* Grapple jaw Opening (Inches) 37.9 Approximate weight (Pounds) Greater than 1500 pounds *Tine Material is Grade 80 Plate (80,000 PSI Minimum Yield Strength). virnigmfg.com attachments@virnigmfg.com

13 V40 utility FOrk grapple One-cylinder grapple designed to handle a variety of materials including manure, brush, and debris. h igh tensile strength removable, replaceable diameter tines. No cross member at tine tips allowing better material penetration. grapples bore, stroke cylinder featuring corrosion, dent and flake resistant NitroSteel cylinder rod. Greasable 1 ¼ diameter cylinder and hinge pins. Teflon coated bushings provide lubrication at jaw hinge. MGV $2,945 MGV $3,095 MGV $3,180 MGV $3,315 Price includes a cylinder, fittings, couplers, and eaton hoses. model mgv160 mgv166 mgv172 mgv178 Overall Bucket width (Inches) Bucket Depth (Inches) 33.5 Bucket height (Inches) 21.5 Number of Tines Space Between Tines (Inches) Tine Diameter (Inches) 1.75* Grapple jaw Opening (Inches) 38.0 Approximate weight (Pounds) Less than 2400 pounds *Tine Material is 1045 CFSR Round (100,000 PSI Minimum Yield Strength). V50 TiNE FOrk grapple Two-cylinder independent grapple designed to handle a variety of materials including manure, brush, and debris. Two 1 2ˮ thick vertical braces inside the frame for added strength high tensile strength removable, replaceable 2 diameter tines. No cross member at tine tips allowing better material penetration. 2 bore, stroke cylinders featuring corrosion, dent and flake resistant NitroSteel cylinder rods. Greasable 1 ¼ diameter cylinder pins and diameter hinge pins. Teflon coated bushings provide lubrication at all pivot locations. Known clearance issue on M-Series Bobcat loaders when Cylinder Guards are installed and jaws are open. TBG $4,100 TBG $4,180 TBG $4,260 TBG $4,345 Price includes cylinders, fittings, couplers, and eaton hoses. OpTiON: CyLiNdEr guards Protect cylinders from damage. Pair, installed. model LiST WEighT CYL-GRD $ model TBg260 TBg266 TBg272 TBg278 Overall Bucket width (Inches) Bucket Depth (Inches) 37.0 Bucket height (Inches) 21.8 Number of Tines Space Between Tines (Inches) Tine Diameter (Inches) 2.0* Grapple jaw Opening (Inches) 39.5 Approximate weight (Pounds) Less than 2400 pounds *Tine Material is 1045 CFSR Round (100,000 PSI Minimum Yield Strength). 5 virnigmfg.com attachments@virnigmfg.com PRICeS effective 01/01/17. ALL INFO SuBjeCT TO ChANGe without NOTICe.

14 V60 TiNE FOrk grapple Two-cylinder independent grapple designed to handle a variety of materials including manure, brush, and debris. Four 1 2ˮ thick vertical braces inside the frame for added strength. high tensile strength removable, replaceable 2 ¼ diameter tines No cross member at tine tips allowing better material penetration. 2 bore, stroke cylinders featuring corrosion, dent and flake resistant NitroSteel cylinder rods. Greasable 1 ¼ diameter cylinder pins and diameter hinge pins. Teflon coated bushings provide lubrication at all pivot locations. Known clearance issue on M-Series Bobcat loaders when Cylinder Guards are installed and jaws are open. grapples ITG72 72 $4,795 ITG78 78 $4,920 ITG84 84 $5,030 ITG90 90 $5,240 Price includes cylinders, fittings, couplers, and eaton hoses. OpTiON: CyLiNdEr guards Protect cylinders from damage. Pair, installed. model LiST WEighT CYL-GRD $ model itg72 itg78 itg84 itg90 Overall Bucket width (Inches) Bucket Depth (Inches) 37.0 Bucket height (Inches) 23.5 Number of Tines Space Between Tines (Inches) Tine Diameter (Inches) 2.25* Grapple jaw Opening (Inches) 41.3 Approximate weight (Pounds) Greater than 2400 pounds *Tine Material is 1045 CFSR Round (100,000 PSI Minimum Yield Strength). WhAT makes VirNig TiNES BETTEr? All Virnig bucket tines, hinge pins and cylinder pins are made from 1045 Cold Finished Stress Relieved (CFSR) round stock. In short, 1045 CFSR is stronger than round stock typically used in these applications. Stress relieved stock is specially treated to increase strength, hardness, and wearability. virnigmfg.com attachments@virnigmfg.com

15 V60 root rake grapple Two-cylinder, single jaw grapple for digging, raking, piling and loading debris.

16 50.3 grapple jaw opening. 1/2 Grade 80 steel jaw tines. hard stop for fully open and closed positions preventing excess stress and damage to the cylinders. grapples Open back gives excellent visibility. 1/2 Grade 80 steel rake tines. Teflon coated bushings provide lubrication at all pivot locations. Series 23 replaceable cast teeth. Cylinder Guards standard ˮ bore, stroke cylinders featuring corrosion, dent and flake resistant NitroSteel cylinder rods. RRG72 72 $5,175 RRG84 84 $5,440 Price includes cylinders, fittings, couplers, and eaton hoses. Greasable 1 ¼ diameter cylinder pins and diameter hinge pins. Machine specific hydraulic package to completely protect hose routing. Replacement Teeth, Pins and Shanks available on page 59. model rrg72 rrg84 Overall width (Inches) Overall Depth (Inches) 31.6 Overall height (Inches 29.7 Number of Teeth 7 8 Space Between Teeth (Inches) 9.8 Grapple jaw Opening (Inches) 50.3 Grapple jaw Thickness (Inches) 0.5* Rake Tine Thickness (Inches) 0.5* Approximate weight (Pounds) Greater than 2400 pounds *Material is Grade 80 Plate (80,000 PSI Minimum Yield Strength). PRICeS effective 01/01/17. ALL INFO SuBjeCT TO ChANGe without NOTICe. virnigmfg.com attachments@virnigmfg.com

17 V60 LArgE CApACiTy SkELETON grapple 62.8 grapple jaw opening. grapples 1/2 Grade 50 steel outer jaw tines. 3/8 Grade 50 steel inner jaw tines. Open back gives excellent visibility. 1/2 Grade 80 steel tines. Teflon coated bushings provide lubrication at all pivot locations. Fully gusseted tine tips for added strength. LCG72 72 $5,405 LCG84 84 $5,715 Price includes cylinders, fittings, couplers, and eaton hoses. Two-cylinder independent grapple opens over 5 feet for large jobs. 2 ½ bore, stroke cylinders featuring corrosion, dent and flake resistant NitroSteel cylinder rods. Greasable diameter hinge pins and 1 ¼ cylinder pins. Machine specific hydraulic package to completely protect hose routing. Cylinder Guards standard. model LCg72 LCg84 Overall Bucket width (Inches) Bucket Depth (Inches) 46.0 Bucket height (Inches) 33.8 Number of Tines (with Sides) Space Between Tines (Inches) Grapple jaw Opening (Inches) 62.8 Outside Grapple jaw Thickness (Inches) 0.5* Inside Grapple jaw Thickness (Inches) 0.375** Bucket Tine Thickness (Inches) 0.5*** Approximate weight (Pounds) Greater than 2400 pounds *jaw Material is Grade 50 Plate (50,000 PSI Minimum Yield Strength). **jaw Material is Grade 50 Plate (50,000 PSI Minimum Yield Strength). ***Tine Material is Grade 80 Plate (80,000 PSI Minimum Yield Strength). 9 virnigmfg.com attachments@virnigmfg.com PRICeS effective 01/01/17. ALL INFO SuBjeCT TO ChANGe without NOTICe.

18 BOLT-ON grapple Telescoping mount system requires no cutting or welding to install. One-cylinder grapple with 1" diameter cylinder and hinge pins. 1 ½" bore, 8" stroke cylinder featuring corrosion, dent and flake resistant NitroSteel cylinder rod. NOTe: Not available for factory installation. grapples BOGV $1,350 Price includes a cylinder, fittings, couplers, and eaton hoses. model *Mount tubes telescope to fit various width buckets. **jaw opening varies with type of bucket and installation. BOgV6084 Number of Cylinders 1 Overall Grapple width (Inches) 52.0 Minimum Bucket width (Inches) 60* Maximum Bucket width (Inches) 84* Approximate jaw Opening (Inches) 42** Approximate weight (Pounds) 275 Less than 1800 pounds CAN i install ThE VirNig BOLT-ON grapple ON ANy BrANd OF BuCkET? The Virnig Bolt-On Grapple is designed for use on Virnig buckets that are wide. It is not guaranteed to work on other brands. WhAT VirNig BuCkETS ArE COmpATiBLE WiTh ThE BOLT-ON grapple? The Bolt-On grapple is compatible with: V40 Low Profile Dirt Buckets (additional drilling or welding will be required to secure the Bolt-on Grapple to the V40 Low Profile Dirt Bucket) V50 Low Profile Dirt Buckets V60 Low Profile Dirt Buckets V50 utility Buckets V60 utility Buckets V40 Skeleton Rock Buckets V50 Skeleton Rock Buckets V60 Skeleton Rock Buckets V40 utility Forks *The Bolt-on Grapple will mount on all the above buckets, but the Loader Capacity still needs to be under 1,800 lbs. The Bolt-On grapple is NOT compatible with: All Snow/Light Material Buckets Manure Slurry Buckets V30 Compact Tractor utility Forks V30 Compact Tractor Rock Buckets virnigmfg.com attachments@virnigmfg.com

19 V60 FOur-CyLiNdEr pipe pallet FOrk grapple Four-cylinder design applies consistent pressure to secure long pipe over uneven terrain.

20 V60 FOur-CyLiNdEr pipe pallet FOrk grapple Four-cylinder design applies consistent pressure to secure long pipe over uneven terrain. Functions by main arms moving first while smaller, secondary arms move after main arm cylinders experience resistance. 54ˮ wide frame keeps long material stable. 48 Cascade ITA Class II forged tines rated at 6200 pounds. 2 bore, stroke cylinders featuring corrosion, dent and flake resistant NitroSteel cylinder rods. grapples Greasable 1 ¼ diameter cylinder and hinge pins. TiNES made model LiST PPFG4-CYL $5,760 Price includes cylinders, fittings, couplers, and eaton hoses. model ppfg4-cyl Overall width (Inches) 69.0 Overall Depth (Inches) 58.0 Overall height, Closed (Inches) 44.0 Overall height, Open (Inches) 65.0 Grapple Arm width (Inches) Tine Length / width / Thickness (Inches) 48.0 / 4.0 / 1.75 Lift Capacity (Pounds) 6200 Approximate weight (Pounds) 1110 Greater than 1500 pounds V60 TWO-CyLiNdEr pipe pallet FOrk grapple Two-cylinder independent clamp arms open to near vertical for handling palleted material. 54ˮ wide frame keeps long material stable. 48 or 60 Cascade ITA Class II forged tines. 2 bore, stroke cylinders featuring corrosion, dent and flake resistant NitroSteel cylinder rods. Greasable 1 ¼ diameter cylinder and hinge pins. TiNES made model LiST PPFG248 $4,515 PPFG260 $4,720 Price includes cylinders, fittings, couplers, and eaton hoses. model ppfg248 ppfg260 Overall width (Inches) 70.8 Overall Depth (Inches) Overall height, Closed (Inches) 40.4 Overall height, Open (Inches) 81.4 Grapple Arm width (Inches) 8.3 Tine Length / width / Thickness (Inches) 48.0 / 4.0 / / 4.0 / 1.5 Lift Capacity (Pounds) Approximate weight (Pounds) Greater than 1500 pounds PRICeS effective 01/01/17. ALL INFO SuBjeCT TO ChANGe without NOTICe. virnigmfg.com attachments@virnigmfg.com

21 BruSh CuTTEr COmpAriSON guide CuTTEr COmpAriSON guide when it comes to skid steer brush cutters, it doesn t get better than Virnig. every cutter is designed and manufactured at Virnig s facility in Rice, Minnesota. with 60 models to choose from, there s a Virnig cutter for any brush clearing application. each cutter features a reinforced deck, premium motor and spindle, and a heavy-duty flywheel/blade combination. The unmatched design and durability along with a proactive customer support team means long-lasting performance. Below is an overview of key differences and following is a summary of all Virnig Cutters. See the specific page number for details of each cutter. If there are additional questions please give Virnig a call. CLOSEd deck CuTTErS OpEN deck CuTTErS AppLiCATiON Designed to clear grass, weeds, undergrowth and small trees and saplings up to 4 in diameter. Designed to rough cut dense brush and trees up to 8 in diameter. how it WOrkS Pushes brush forward then shreds it. Debris does not escape the deck easily which allows most of it to be mulched. Cuts debris without needing to push it over first. Brush exits the deck sooner resulting in faster cutting but less mulching. easier to grind stumps with open front. ENd result Provides a consistent, finished cut. Grind stumps to the ground by tilting the front of the deck downward. Provides a rougher, yet maintained cut. Grind stumps to the ground by tilting the front of the deck downward. OpTiONS V50 Cutters have Rear Roller and Swivel Casters available which produce a better cut and prevent scalping. Pair with the Floating Deck cutter for ultimate versatility. No options available. There are two blade styles used on Virnig Brush Cutters updraft BLAdES FLAT BLAdES /2 Thick x 4 wide These curved blades are sharpened on one side. The other side is angled upward, which generates lift. This lift keeps material in the cutting zone and ensures an even cut /8 Thick x 5 wide Completely flat and sharpened on both sides allowing them to be flipped over when dull. when paired with the heavy flywheel on Virnig V50 and V60 Open Deck Cutters, these blades cut through material with ease. 13 virnigmfg.com attachments@virnigmfg.com

22 CLOSEd deck CuTTErS OpEN deck CuTTErS V40 STANdArd deck Starting List price: $4,850 (BBV) Single-sided, updraft. 3 Cut diameter Standard Flow Only Width 60, 72 Flywheel Weight lbs Overall Weight lbs V50 STANdArd deck Rear Roller and Caster options available. x3 page15 (rbv) Single-sided, updraft. V40 OpEN FrONT deck (BBV-O) Single-sided, updraft. x3 Starting List price: $5,170 page21 3 Cut diameter Standard Flow Only Width 60, 72 Flywheel Weight lbs Overall Weight lbs V50 OpEN FrONT deck (rbv-o) Double-sided, flat. CuTTEr COmpAriSON guide x3 x3 Starting List price: $5,885 page17 4 Cut diameter Standard and high Flow Width 60, 66, 72, 78 Flywheel Weight lbs Overall Weight lbs V50 FLOATiNg deck Rear Roller and Caster options available. Deck floats 4 5/8. (rbv-f) Single-sided, updraft. x3 Starting List price: $7,230 page23 6 Cut diameter Standard and high Flow Width 60, 66, 72, 78 Flywheel Weight 275 lbs Overall Weight lbs V60 industrial CuTTEr (irc) Double-sided, flat. x4 Starting List price: $6,490 page19 4 Cut diameter Standard and high Flow Width 60, 66, 72, 78 Flywheel Weight lbs Overall Weight lbs Starting List price: $11,015 page25 8 Cut diameter Standard and high Flow Width 72, 78 Flywheel Weight lbs Overall Weight lbs virnigmfg.com attachments@virnigmfg.com

23 V40 rotary BruSh CuTTEr STANdArd deck Designed to quickly clear and mulch brush and small trees up to 3 in diameter.

24 Standard dual hydraulic pressure relief valves with dynamic braking stops the lb flywheel in under 10 seconds. Direct drive eaton motor rated up to 25 GPM for usage on a wide variety of skid steers. Bracing along the top connected to a push bar at the front provides rigidity for pushing over thick brush and trees. CuTTErS DeTAIL under DeCK ½ x 4 single side updraft blades for efficient cutting and mulching. STANdArd FLOW LOAdErS: gpm BBV $4,850 BBV $5,145 Includes couplers and 3/4" diameter eaton hoses. Please specify MAKe and MODeL of skid loader when ordering Rotary Brush Cutters. DO NOT OPeRATe ROTARY BRuSh CuTTeR without A ShATTeRPROOF CAB DOOR ON LOADeR. Three-blade cutting system, mounted to a large circular flywheel, ensures the flywheel bounces off stumps rather than catching and damaging components. rotary BruSh CuTTEr BLAdE kit ½" x 4" single side updraft blades. Includes three blades, bolts, lock washers and lock nuts. For Virnig V40 Open Front, V40 Standard, V50 Floating, and V50 Standard Rotary Cutters only. Must buy entire kit for safety purposes. model WidTh WEighT LiST CBK $240 CBK $250 model BBV60 BBV72 Cut width (Inches) Overall Cutter width (Inches) Cutter Depth (Inches) Cutter height (Inches) 21.4 Deck height (Inches) 7.7 Minimum Cut height (Inches) 1.9 Cutting Capacity, Diameter (Inches) 3.0 Recommended Flow Rate (GPM) Approximate weight (Pounds) Greater than 1500 pounds BLAdE Tip SpEEdS (Fpm) model 16 gpm minimum 25 gpm maximum BBV ,364 14,631 BBV ,237 17,557 Flow rates in gallons per minute (GPM) and blade tip speeds in feet per minute (FPM). PRICeS effective 01/01/17. ALL INFO SuBjeCT TO ChANGe without NOTICe. virnigmfg.com attachments@virnigmfg.com

25 V50 rotary BruSh CuTTEr STANdArd deck Cuts through brush up to 4 in diameter with ease, while the three blade design produces a superior finish. OpTiON: SWiVEL CASTErS 360 rotating swivel casters produce a better cut by creating a smoother ride and limiting gouging and scalping. 5 ½" diameter caster with 1 ¼" greaseable pins. Sold as a pair and includes all required hardware. WEighT BCC ALL $ OpTiON: rear roller Compacts chopped material and produces a better cut by limiting gouging and scalping. 5 ½" diameter roller with 2" diameter shaft and bearings. Includes all required hardware. WEighT BCR60 60 $ BCR66 66 $ BCR72 72 $ BCR78 78 $ virnigmfg.com attachments@virnigmfg.com PRICeS effective 01/01/17. ALL INFO SuBjeCT TO ChANGe without NOTICe.

26 Standard dual hydraulic pressure relief valves with dynamic braking stops the lb. flywheel in under 10 seconds. Bracing along the top connected to a push bar at the front provides rigidity for pushing over thick brush and trees. Two standard flow and two high flow eaton motor configurations ensure optimum performance and longevity. STANdArd FLOW LOAdErS: gpm RBV $5,885 RBV $6,145 RBV $6,350 RBV $6,605 STANdArd FLOW LOAdErS: gpm high FLOW LOAdErS: gpm high FLOW LOAdErS: gpm Cutters include 3/4 diameter eaton hoses and couplers. high flow Cutters include a case drain. Standard replaceable front skid shoes. RBV $5,885 RBV $6,145 RBV $6,350 RBV $6,605 RBV60-hF33 60 $6,680 RBV66-hF33 66 $6,935 RBV72-hF33 72 $7,155 RBV78-hF33 78 $7,480 RBV60-hF42 60 $7,095 RBV66-hF42 66 $7,350 RBV72-hF42 72 $7,570 RBV78-hF42 78 $7,825 Please specify MAKe and MODeL of skid loader when ordering Rotary Brush Cutters. DO NOT OPeRATe ROTARY BRuSh CuTTeR without A ShATTeRPROOF CAB DOOR ON LOADeR. DeTAIL under DeCK Three-blade cutting system, mounted to a large circular flywheel, ensures the flywheel bounces off stumps rather than catching and damaging components. model rbv60 rbv66 rbv72 rbv78 Cut width Overall Cutter width (Inches) Cutter Depth (Inches) Cutter height (Inches) 20.9 Deck height (Inches) 8.8 Minimum Cut height (Inches) 1.8 Cutting Capacity, Diameter (Inches) 4.0 Recommended Flow Rate (GPM) Standard Flow, high Flow Approximate weight (Pounds) 1180* 1325* 1435* 1540* *high flow motor options add approximately 70 pounds to model weight. Greater than 1500 pounds BLAdE Tip SpEEdS (Fpm) Standard chain curtain minimizes flying debris and provides better mulching capability. ½ x 4 single side updraft blades for efficient cutting and mulching. CuTTErS rotary BruSh CuTTEr BLAdE kit ½" x 4" single side updraft blades. Includes three blades, bolts, lock washers and lock nuts. For Virnig V50 Floating and V50 Standard Cutters only. Must buy entire kit for safety purposes. model WidTh WEighT LiST CBK $240 CBK $240 CBK $250 CBK $260 model 14 gpm minimum 18 gpm maximum RBV ,367 13,329 RBV ,404 14,662 RBV ,440 15,995 RBV ,477 17,328 model 18 gpm minimum 25 gpm maximum RBV ,534 14,631 RBV ,588 16,094 RBV ,641 17,557 RBV ,695 19,020 model 25 gpm minimum 33 gpm maximum RBV60-hF33 11,483 15,157 RBV66-hF33 12,630 16,672 RBV72-hF33 13,779 18,188 RBV78-hF33 14,927 19,704 model 33 gpm minimum 42 gpm maximum RBV60-hF42 10,062 12,806 RBV66-hF42 11,068 14,087 RBV72-hF42 12,074 15,367 RBV78-hF42 13,081 16,648 Flow rates in gallons per minute (GPM) and blade tip speeds in feet per minute (FPM). virnigmfg.com attachments@virnigmfg.com

27 V50 rotary BruSh CuTTEr FLOATiNg deck Innovative floating deck provides a consistent cut on uneven terrain and the three blade design clears brush and trees up to 4 in diameter. OpTiON: SWiVEL CASTErS 360 rotating swivel casters produce a better cut by creating a smoother ride and limiting gouging and scalping. 5 ½" diameter caster with 1 ¼" greaseable pins. Sold as a pair and includes all required hardware. WEighT BCC ALL $ OpTiON: rear roller Compacts chopped material and produces a better cut by limiting gouging and scalping. 5 ½" diameter roller with 2" diameter shaft and bearings. Includes all required hardware. WEighT BCR60-F 60 $ BCR66-F 66 $ BCR72-F 72 $ BCR78-F 78 $ virnigmfg.com attachments@virnigmfg.com PRICeS effective 01/01/17. ALL INFO SuBjeCT TO ChANGe without NOTICe.

28 Deck allows of travel. Can be secured in fixed position if desired. Standard dual hydraulic pressure relief valves with dynamic braking stops the lb. flywheel in under 10 seconds. Bracing along the top connected to a push bar at the front provides rigidity for pushing over thick brush and trees. Two standard flow and two high flow eaton motor configurations ensure optimum performance and longevity. STANdArd FLOW LOAdErS: gpm Standard replaceable front skid shoes. RBV60-18-F 60 $6,490 RBV66-18-F 66 $6,755 RBV72-18-F 72 $6,965 RBV78-18-F 78 $7,220 STANdArd FLOW LOAdErS: gpm RBV60-25-F 60 $6,490 RBV66-25-F 66 $6,755 RBV72-25-F 72 $6,965 RBV78-25-F 78 $7,220 high FLOW LOAdErS: gpm RBV60-hF33-F 60 $7,300 RBV66-hF33-F 66 $7,555 RBV72-hF33-F 72 $7,770 RBV78-hF33-F 78 $8,105 high FLOW LOAdErS: gpm RBV60-hF42-F 60 $7,720 RBV66-hF42-F 66 $7,975 RBV72-hF42-F 72 $8,190 RBV78-hF42-F 78 $8,455 Cutters include couplers and 3/4 diameter eaton hoses. high flow Cutters include a case drain. rotary BruSh CuTTEr BLAdE kit Please specify MAKe and MODeL of skid loader when ordering Rotary Brush Cutters. DO NOT OPeRATe ROTARY BRuSh CuTTeR without A ShATTeRPROOF CAB DOOR ON LOADeR. DeTAIL under DeCK Standard chain curtain minimizes flying debris and provides better mulching capability. ½ x 4 single side updraft blades for efficient cutting and mulching. Three-blade cutting system, mounted to a large circular flywheel, ensures the flywheel bounces off stumps rather than catching and damaging components. model rbv60-f rbv66-f rbv72-f rbv78-f Cut width Overall Cutter width (Inches) Cutter Depth (Inches) Cutter height (Inches) 20.9 Deck height (Inches) 8.8 Minimum Cut height (Inches) 1.8 Vertical Deck Travel (Inches) 4.6 Cutting Capacity, Diameter (Inches) 4.0 Recommended Flow Rate (GPM) Standard Flow, high Flow Approximate weight (Pounds) 1430* 1560* 1680* 1760* Greater than 1500 pounds *high flow motor options add approximately 70 pounds to model weight. BLAdE Tip SpEEdS (Fpm) CuTTErS ½" x 4" single side updraft blades. Includes three blades, bolts, lock washers and lock nuts. For Virnig V50 Floating and V50 Standard Cutters only. Must buy entire kit for safety purposes. model 14 gpm minimum 18 gpm maximum RBV60-18-F 10,367 13,329 RBV66-18-F 11,404 14,662 RBV72-18-F 12,440 15,995 RBV78-18-F 13,477 17,328 model 25 gpm minimum 33 gpm maximum RBV60-hF33-F 11,483 15,157 RBV66-hF33-F 12,630 16,672 RBV72-hF33-F 13,779 18,188 RBV78-hF33-F 14,927 19,704 model WidTh WEighT LiST CBK $240 CBK $240 CBK $250 CBK $260 model 18 gpm minimum 25 gpm maximum RBV60-25-F 10,534 14,631 RBV66-25-F 11,588 16,094 RBV72-25-F 12,641 17,557 RBV78-25-F 13,695 19,020 model 33 gpm minimum 42 gpm maximum RBV60-hF42-F 10,062 12,806 RBV66-hF42-F 11,068 14,087 RBV72-hF42-F 12,074 15,367 RBV78-hF42-F 13,081 16,648 Flow rates in gallons per minute (GPM) and blade tip speeds in feet per minute (FPM). virnigmfg.com attachments@virnigmfg.com

29 V40 rotary BruSh CuTTEr OpEN FrONT deck Constructed to rough-cut dense brush and small trees up to 3 in diameter.

30 Standard dual hydraulic pressure relief valves with dynamic braking stops the lb flywheel in under 10 seconds. Direct drive eaton motor rated up to 25 GPM for usage on a wide variety of skid steers. Tall push bar at the front provides rigidity and helps push over thick brush and trees. Able to cut down to the ground to limit regrowth by tilting the deck downward. CuTTErS DeTAIL under DeCK ½ x 4 single side updraft blades for efficient cutting and mulching. STANdArd FLOW LOAdErS: gpm BBV60-25-O 60 $5,170 BBV72-25-O 72 $5,440 Includes couplers and 3/4 diameter eaton hoses. Please specify MAKe and MODeL of skid loader when ordering Rotary Brush Cutters. DO NOT OPeRATe ROTARY BRuSh CuTTeR without A ShATTeRPROOF CAB DOOR ON LOADeR. Three-blade cutting system, mounted to a large circular flywheel, ensures the flywheel bounces off stumps rather than catching and damaging components. rotary BruSh CuTTEr BLAdE kit ½" x 4" single side updraft blades. Includes three blades, bolts, lock washers and lock nuts. For Virnig V40 Open Front, V40 Standard, V50 Floating, and V50 Standard Rotary Cutters only. Must buy entire kit for safety purposes. model WidTh WEighT LiST CBK $240 CBK $250 model BBV60-O BBV72-O Cut width (Inches) Overall Cutter width (Inches) Cutter Depth (Inches) Cutter height (Inches) 21.4 Deck height (Inches) 7.7 Push Bar height (Inches) 19.7 Minimum Cut height (Inches) 1.9 Cutting Capacity, Diameter (Inches) 3.0 Recommended Flow Rate (GPM) Approximate weight (Pounds) Greater than 1500 pounds BLAdE Tip SpEEdS (Fpm) model 16 gpm minimum 25 gpm maximum BBV60-25-O 9,364 14,631 BBV72-25-O 11,237 17,557 Flow rates in gallons per minute (GPM) and blade tip speeds in feet per minute (FPM). PRICeS effective 01/01/17. ALL INFO SuBjeCT TO ChANGe without NOTICe. virnigmfg.com attachments@virnigmfg.com

31 V50 rotary BruSh CuTTEr OpEN FrONT deck Constructed to rough-cut dense brush and remove trees up to 6 in diameter.

32 Standard dual hydraulic pressure relief valves with dynamic braking stops the 275 lb flywheel in under 10 seconds. Two standard flow and two high flow eaton motor configurations ensure optimum performance and longevity. Tall push bar at the front provides rigidity and helps push over thick brush and trees. Double-sided, 5/8 x 5 blades can be flipped to utilize second sharpened edges. CuTTErS DeTAIL under DeCK (RBV72-O*) Standard replaceable front skid shoes increase the mower deck s wear life. STANdArd FLOW LOAdErS: gpm RBV60-18-O 60 $7,230 RBV66-18-O 66 $7,550 RBV72-18-O 72 $7,790 RBV78-18-O 78 $8,150 STANdArd FLOW LOAdErS: gpm RBV60-25-O 60 $7,230 RBV66-25-O 66 $7,550 RBV72-25-O 72 $7,790 RBV78-25-O 78 $8,150 high FLOW LOAdErS: gpm RBV60-hF33-O 60 $8,210 RBV66-hF33-O 66 $8,470 RBV72-hF33-O 72 $8,670 RBV78-hF33-O 78 $8,965 high FLOW LOAdErS: gpm RBV60-hF42-O 60 $8,745 RBV66-hF42-O 66 $9,005 RBV72-hF42-O 72 $9,205 RBV78-hF42-O 78 $9,500 Cutters include couplers and 3/4 diameter eaton hoses. high flow Cutters include a case drain. Please specify MAKe and MODeL of skid loader when ordering Rotary Brush Cutters. DO NOT OPeRATe ROTARY BRuSh CuTTeR without A ShATTeRPROOF CAB DOOR ON LOADeR. Able to cut down to the ground to limit regrowth by tilting the deck downward. Three-blade cutting system, mounted to a rounded flywheel, ensures the flywheel bounces off stumps rather than catching and damaging components. * 60 and 66 models have a circular flywheel and the 78 flywheel is similar to the 72 pictured above. model rbv60-o rbv66-o rbv72-o rbv78-o Cut width Overall Cutter width (Inches) Cutter Depth (Inches) Cutter height (Inches) 21.4 Deck height (Inches) 7.3 Push Bar height (Inches) 20.4 Minimum Cut height (Inches) 2.0 Cutting Capacity, Diameter (Inches) 6.0 Recommended Flow Rate (GPM) Standard Flow, high Flow Approximate weight (Pounds) 1355* 1465* 1550* 1625* Greater than 1500 pounds *high flow motor options add approximately 70 pounds to model weight. BLAdE Tip SpEEdS (Fpm) V50 rotary BruSh CuTTEr OpEN FrONT BLAdE kit 5 8ˮ x 5" double sided blades. Includes three blades, bolts, nuts and roll pins. For Virnig V50 Open Front Rotary Cutter only. Must buy entire kit for safety purposes. model WidTh WEighT LiST OBK $260 OBK $270 OBK $270 OBK $270 model 14 gpm minimum 18 gpm maximum RBV60-18-O 10,367 13,329 RBV66-18-O 11,404 14,662 RBV72-18-O 12,440 15,995 RBV78-18-O 13,477 17,328 model 18 gpm minimum 25 gpm maximum RBV66-25-O 10,534 14,631 RBV66-25-O 11,588 16,094 RBV72-25-O 12,641 17,557 RBV78-25-O 13,695 19,020 model 25 gpm minimum Flow rates in gallons per minute (GPM) and blade tip speeds in feet per minute (FPM). 33 gpm maximum RBV60-hF33-O 11,483 15,157 RBV66-hF33-O 12,630 16,672 RBV72-hF33-O 13,779 18,188 RBV78-hF33-O 14,927 19,704 model 33 gpm minimum 42 gpm maximum RBV60-hF42-O 10,062 12,806 RBV66-hF42-O 11,068 14,087 RBV72-hF42-O 12,074 15,367 RBV78-hF42-O 13,081 16,648 PRICeS effective 01/01/17. ALL INFO SuBjeCT TO ChANGe without NOTICe. virnigmfg.com attachments@virnigmfg.com

33 V60 industrial rotary CuTTEr Constructed to rough-cut thick brush and remove trees up to 8 in diameter.

34 Standard dual hydraulic pressure relief valves with dynamic braking for safety stopping the lb. flywheel in under 15 seconds. One standard flow and three high flow eaton motor configurations ensure optimum performance and longevity. Tall push bar at the front provides rigidity and helps push over thick brush and trees. CuTTErS DeTAIL under DeCK Able to cut down to the ground to limit regrowth by tilting the deck downward. Standard replaceable front skid shoes increase the mower deck s wear life. STANdArd FLOW LOAdErS: gpm IRC $11,015 IRC $11,350 high FLOW LOAdErS: gpm IRC72-hF27 72 $11,295 IRC78-hF27 78 $11,630 Double-sided, 5/8 x 5 blades can be flipped over to utilize second sharpened edges. Please specify MAKe and MODeL of skid loader when ordering Rotary Brush Cutters. DO NOT OPeRATe ROTARY BRuSh CuTTeR without A ShATTeRPROOF CAB DOOR ON LOADeR. Four-blade cutting system, mounted to a large circular flywheel, ensures flywheel bounces off stumps rather than catching and damaging components. high FLOW LOAdErS: gpm IRC72-hF32 72 $11,710 IRC78-hF32 78 $12,045 high FLOW LOAdErS: gpm IRC72-hF42 72 $12,130 IRC78-hF42 78 $12,465 Cutters include couplers and 3/4 diameter eaton hoses. high flow cutters include a case drain. industrial rotary CuTTEr BLAdE kit 5 8ˮ x 5" double sided blades. Includes four blades, bolts, nuts and roll pins. For Virnig Industrial Rotary Cutter only. Must buy entire kit for safety purposes. model WidTh WEighT LiST IBK $360 IBK $360 model irc72 irc78 Cut width (Inches) Overall Cutter width (Inches) Overall Depth (Inches) Overall height (Inches) 20.1 Deck height (Inches) 8.3 Push Bar height (Inches) 23.4 Minimum Cut height (Inches) 2.3 Cutting Capacity, Diameter (Inches) 8.0 Recommended Flow Rate (GPM) model 20 gpm minimum BLAdE Tip SpEEdS (Fpm) 25 gpm maximum IRC ,023 13,779 IRC ,942 14,928 model 20 gpm minimum 27 gpm maximum IRC72-hF27 11,023 14,882 IRC78-hF27 11,942 16, Standard Flow, high Flow Approximate weight (Pounds) model 27 gpm minimum 32 gpm maximum IRC72-hF32 11,875 14,074 IRC78-hF32 12,865 15,247 model Greater than 2200 pounds 32 gpm minimum 42 gpm maximum IRC72-hF42 11,709 15,368 IRC78-hF42 12,685 16,649 Flow rates in gallons per minute (GPM) and blade tip speeds in feet per minute (FPM). PRICeS effective 01/01/17. ALL INFO SuBjeCT TO ChANGe without NOTICe. virnigmfg.com attachments@virnigmfg.com

35 ANgLE BrOOm Powerful, direct drive motor clears dirt and snow while the hydraulic Angle helps control where it s swept. OpTiON: deflector Bolts onto broom using existing mount holes. Covers additional 30 degrees to limit flying material. Can be secured in storage position without removal. WEighT ABDF60 60 $ ABDF72 72 $ ABDF84 84 $ ABDF96 96 $ OpTiON: hydraulic ANgLE Hydraulic Angle requires one of the listed electric control options on the next page. One-cylinder design using an electric control valve. 2 ½ bore and 8 stroke cylinder with a NitroSteel rod. Greasable 1 ¼ cylinder and linkage pins. WEighT VAB-hA ALL $1, virnigmfg.com attachments@virnigmfg.com PRICeS effective 01/01/17. ALL INFO SuBjeCT TO ChANGe without NOTICe.

36 hood made from 14-Gauge steel with formed edge fold for additional strength. easy exchange of wafers; no disconnecting of hydraulic hoses required. Direct drive design with replaceable drive components allowing forward and reverse operation. BrOOmS Motor is guarded while allowing easy access for maintenance. heavy-duty stands flip up for easy storage. No pins required. VAB60 60 $5,405 VAB72 72 $5,600 VAB84 84 $5,785 VAB96 96 $5,975 Price includes poly/wire wafer pack, couplers, and eaton hoses. Standard with 32ˮ diameter poly/wire wafers. Centering swing linkage with multiple pivot points better centers broom in front of loader when angled. Standard with manual angle. hydraulic Angle option available. model VAB60 VAB72 VAB84 VAB96 Sweeping width, Straight (Inches) Overall width (Inches) Rotation Angle (Degrees) 27 Sweeping width, Full Angle (Inches) Overall width, Full Angle (Inches) Recommended Flow Rate (GPM) Number of 32 Inch Diameter wafers Approximate weight (Pounds) Greater than 1500 pounds hydraulic ANgLE ELECTriC CONTrOL OpTiONS model descr. LOAdEr BrANd LiST elc7 1 7 PIN BOBCAT $730 elc8 8 PIN CAT $190 elc8trx 8 PIN TeReX/ASV, TAKeuChI $190 elc14 14 PIN CASe, Nh, VOLVO, KuBOTA, jcb, GehL, MuSTANG, TAKeuChI $210 elc14jd 14 PIN john DeeRe $210 elc14cat 14 PIN CAT $210 elc14cathf 14 PIN CAT high FLOw $230 1 Compatible with Bobcat 7 pin CanBus electric control system. May not work on Bobcat loaders from 2012 or older. -All the above connectors utilize in cab controls. ANgLE BrOOm WAFEr pack 10 /32" (I.D./O.D.) diameter poly/wire wafers. All poly wafers also available. Call for pricing and availability. will NOT fit Pick-up Broom. For Virnig Angle Brooms only. model WidTh qty WEighT LiST AwC $580 AwC $690 AwC $805 AwC $920 model description LOAdEr BrANd LiST elcacc 12 V ACCeSSORY PLuG 1 ALL, IF equipped $245 elcbat POweR SOuRCe 2 ALL $300 1 utilizes 12 volt accessory plug (cigarette lighter) in cab for power, includes magnetic box with switch for control. 2 utilizes power source (battery) of loader for power, includes 12 volt accessory outlet, 12 volt accessory plug and magnetic box with switch for control. virnigmfg.com attachments@virnigmfg.com

37 pick-up BrOOm Direct drive motor, high strength bucket and intelligent design ensure many years of performance. OpTiON: gutter BruSh Increases cleaning width by 12. Adjustable hydraulic valve to control brush speed. Can be secured in storage position without removal. Replacement brush available on the next page. WEighT GB ALL $1, OpTiON: WATEr kit 30-gallon tank provides 20 minutes of continuous operation. 12 volt, 2.1 GPM maximum pump with wiring harness. Bolt-on accessory for Pick-up Broom only. Includes all required components. WEighT wk60 60 $1, wk72 72 $1, wk84 84 $1, virnigmfg.com PRICeS effective 01/01/17. ALL INFO SuBjeCT TO ChANGe without NOTICe.

38 Direct drive design with replaceable drive components allowing forward and reverse operation. easy exchange of wafers; no disconnecting of hydraulic hoses required. BrOOmS Motor is guarded while allowing easy access for maintenance. heavy-duty frame adjusts to account for bristle wear by utilizing pins with multiple holes. easier and longer lasting than a bolt and nut. PuB60 60 $4,775 PuB72 72 $5,045 PuB84 84 $5,395 Price includes poly/wire wafer pack, couplers, and eaton hoses. pick-up BrOOm WAFEr pack /26.0 (I.D./O.D.)diameter poly/wire wafers. All poly wafers also available. Call for pricing and availability. will NOT fit Angle Broom. For Virnig Pick-up Brooms only. model WidTh qty WT LiST PwC $440 PwC $530 PwC $620 pick-up BrOOm EdgE kit 5 8ˮ x 6" reversible double bevel steel edge. Includes all required hardware. For Virnig Pick-up Broom only. model WidTh WEighT LiST PuBeK $180 PuBeK $210 PuBeK $245 Standard with 5/8ˮx 6ˮ reversible, replaceable bolt-on wear edge. Standard with 26 diameter poly/wire wafers; all poly wafers also available. Call for pricing and availability. gutter BruSh replacement BruSh Steel wire bristles. For Virnig Gutter Brush only. model WEighT LiST GBRB 27 $160 Reinforced bucket, similar to the Virnig V50 Dirt Bucket, results in long term performance. model pub60 pub72 pub84 Sweeping width (Inches) Overall width (Inches) Overall height (Inches) 31.3 Overall Depth (Inches) 62.4 Recommended Flow Rate (GPM) Number of 26 inch Diameter wafers Approximate weight (Pounds) * with water Kit installed is 1800 pounds. Greater than 1500 pounds* virnigmfg.com attachments@virnigmfg.com

39 TrENChEr Designed to quickly and reliably dig trenches 36, 48, or 60 inches deep.

40 Adjustable and removable auger clears loose soil from the trenching area. Various chain configurations available for trenching in soft, hard, rocky, or frozen ground to get the job done quicker. Standard manual side-shift allows operator to dig near structures and other objects. Direct drive eaton motor reduces downtime, no drive chains. Standard flow and high flow options available. Multiple digging depths and chain widths available. See chart below. Chain also rotates in reverse to expel obstructions and chain tension can be quickly adjusted. Please specify MAKe and MODeL of skid loader when ordering Trenchers. Price includes fittings, couplers, and eaton hoses. Standard crumber designed to keep the trench bottom clean and smooth. LANdSCApiNg 36 digging depth 48 digging depth 60 digging depth model max gpm LiST TRN $4,765 TRN36-hF33 33 $5,690 TRN36-hF42 42 $6,110 model max gpm LiST TRN $4,810 TRN48-hF33 33 $5,735 TRN48-hF42 42 $6,165 model max gpm LiST TRN $4,855 TRN60-hF33 33 $5,780 TRN60-hF42 42 $6,210 SINGLE STANDARD SiNgLE STANdArd ChAiN 1 item WidTh LiST 10138PP 6 $ PP 8 $ PP 10 $ PP 12 $1,065 SINGLE STANDARD SiNgLE STANdArd ChAiN 1 item WidTh LiST 9866PP 6 $ PP 8 $1, PP 10 $1, PP 12 $1,355 SINGLE STANDARD SiNgLE STANdArd ChAiN 1 item WidTh LiST 9994PP 6 $1, PP 8 $1,265 DOUBLE STANDARD double STANdArd ChAiN 2 item WidTh LiST 10139PP 6 $ PP 8 $1, PP 10 $1, PP 12 $1,260 DOUBLE STANDARD double STANdArd ChAiN 2 item WidTh LiST 9867PP 6 $1, PP 8 $1, PP 10 $1, PP 12 $1,605 DOUBLE STANDARD double STANdArd ChAiN 2 item WidTh LiST 9995PP 6 $1, PP 8 $1,520 50/50 TERMINATOR TErmiNATOr ChAiN 3 item WidTh LiST 10140PP 6 $1, PP 8 $1,560 50/50 TERMINATOR TErmiNATOr ChAiN 3 item WidTh LiST 9868PP 6 $1, PP 8 $1,960 50/50 TERMINATOR TErmiNATOr ChAiN 3 item WidTh LiST 9996PP 6 $2, PP 8 $2,315 50/50 ROCK rock & FrOST ChAiN 4 item WidTh LiST 10141PP 6 $1, PP 8 $1,670 50/50 ROCK rock & FrOST ChAiN 4 item WidTh LiST 9869PP 6 $1, PP 8 $2,105 rock & FrOST ChAiN 4 item WidTh LiST 9997PP 6 $2, PP 8 $2,470 1 Single Standard - cup tooth every other station. 2 double Standard - cup tooth every station. 3 Terminator - 50% cup teeth, 50% shark-style teeth with embedded carbide inserts. 4 rock and Frost - 50% cup teeth, 50% replaceable carbide tip rock teeth. Other chain configurations are available. Contact Virnig for pricing. model TrN36 TrN48 TrN60 Dig Depth (Inches) Overall width (Inches) 58.5 Frame width (Inches) 55.8 Overall height (Inches) 25.8 Overall Length (Inches) Side Shift Travel (Inches) 8.5 / 17.0 Auger Diameter (Inches) 17.3 Spoil Auger Discharge Reach (Inches) 20.0 Optimal Trenching Angle (Degrees) 60 Recommended Flow Rate Standard Flow up to 25 GPM / high Flow GPM Approximate weight (Pounds) 1135* 1220* 1285* Greater than 1500 pounds *with Terminator Chain. PRICeS effective 01/01/17. ALL INFO SuBjeCT TO ChANGe without NOTICe. virnigmfg.com attachments@virnigmfg.com

41 power rake Grade, rake and remove debris all with one attachment.

42 Floating design keeps the rake level for a smooth, even finish. Manually angle the rake 25 degrees in either direction. hydraulic Angle option available. Guarded, direct drive eaton motor reduces downtime. LANdSCApiNg Standard Sandvik carbide tip teeth for long life in many soil conditions. Solid urethane filled tires eliminate costly interruptions from flats. Standard removable end plates help contain raked debris. model LiST PwR72 $7,415 PwR90 $7,930 Price includes fittings, couplers, and eaton hoses. Bi-directional drum works the soil in both directions for quick seedbed preparation. model pwr72 pwr90 Raking width (Inches) Raking width at Full Angle (Inches) Overall width (Inches) Overall Depth (Inches) 68.5 Overall height (Inches) 27.5 Drum Diameter (Inches) 8.5 Number of Teeth Float Link Angle (Degrees) 22 Rake Angle (Degrees) +/- 25 Recommended Flow Rate (GPM) Approximate weight (Pounds) Greater than 1500 pounds OpTiON: hydraulic ANgLE WT PwR-hA ALL $1, One-cylinder design using an electric control valve. 2 ½" bore, 8" stroke cylinder with a NitroSteel rod. Greasable 1 ¼" cylinder and linkage pins. Hydraulic Angle requires one of the listed electric control options. hydraulic ANgLE ELECTriC CONTrOL OpTiONS model descr. LOAdEr BrANd LiST elc7 1 7 PIN BOBCAT $730 elc8 8 PIN CAT $190 elc8trx 8 PIN TeReX/ASV, TAKeuChI $190 elc14 14 PIN CASe, Nh, VOLVO, KuBOTA, jcb, GehL, MuSTANG, TAKeuChI $210 elc14jd 14 PIN john DeeRe $210 elc14cat 14 PIN CAT $210 elc14cathf 14 PIN CAT high FLOw $230 1 Compatible with Bobcat 7 pin CanBus electric control system. May not work on Bobcat loaders from 2012 or older. -All the above connectors utilize in cab controls. model description LOAdEr BrANd LiST elcacc 12 V ACCeSSORY PLuG 1 ALL, IF equipped $245 elcbat POweR SOuRCe 2 ALL $300 1 utilizes 12 volt accessory plug (cigarette lighter) in cab for power, includes magnetic box with switch for control. 2 utilizes power source (battery) of loader for power, includes 12 volt accessory outlet, 12 volt accessory plug and magnetic box with switch for control. PRICeS effective 01/01/17. ALL INFO SuBjeCT TO ChANGe without NOTICe. virnigmfg.com attachments@virnigmfg.com

43 TrEE puller jaw opens to 11 ½ to quickly pull out trees and fence posts. LANdSCApiNg hard stop at tip keeps small space between teeth when fully closed. This allows even small trees to be pulled without shearing them off. Single hydraulic cylinder is protected from debris and other objects. Greasable pins at all pivot locations. 1 ¼ diameter cylinder pins and diameter pivot pins. model LiST TRP $1,750 Price includes cylinder, fittings, couplers, and eaton hoses. model Trp Overall width (Inches) 47.0 Overall Depth (Inches) 37.3 Overall height (Inches) 22.0 jaw Opening (Inches) 11.5 Approximate weight (Pounds) 465 Greater than 1500 pounds LANd LEVELEr Sturdy construction permits aggressive cutting, while wide blade location allows precise control for a smooth finish. Two reversible, replaceable bolt-on wear edges. LLV72 72 $1,875 LLV78 78 $2,060 LLV84 84 $2,210 LLV90 90 $2,370 model LLV72 LLV78 LLV84 LLV90 Overall width (Inches) Overall Depth (Inches) Bolt-on edge (Inches) 5/8 x 6 5/8 x 8 Approximate weight (Pounds) OpTiON: hydraulic SCAriFiEr Breaks up compacted ground while leveling. 1 ½ bore, 6 stroke cylinder with 1 rod. SK72 72 $1,250 SK78 78 $1,310 SK84 84 $1,340 SK90 90 $1,455 model Sk72 Sk78 Sk84 Sk90 Number of Teeth Digging Depth (Inches) 6.0 Approximate weight (Pounds) *Designed for use on Virnig Manufacturing, Inc. Land Levelers Only. 35 virnigmfg.com attachments@virnigmfg.com PRICeS effective 01/01/17. ALL INFO SuBjeCT TO ChANGe without NOTICe.

44 dozer BLAdE - 6 WAy Six-way dozer blade with heavy-duty frame, 3 8 thick moldboard and adjustable skid shoes. LANdSCApiNg DZR72 72 $6,000 DZR84 84 $6,200 DZR96 96 $6,400 Price includes cylinder, fittings, couplers, and eaton hoses. Two-cylinder hydraulic angle and one-cylinder hydraulic tilt utilizing one electric valve and one loader valve. 3 ½ bore, 8 stroke tilt and angle cylinders featuring corrosion, dent and flake resistant NitroSteel cylinder rods. Greasable diameter hinge and oscillation pins and diameter cylinder pins. Teflon coated bushings provide lubrication at all pivot locations. 5 8" x 8 reversible, replaceable bolt-on wear edge. One of the electric control options listed below is required. dozer BLAdE ELECTriC CONTrOL OpTiONS model descr. LOAdEr BrANd LiST elc7 1 7 PIN BOBCAT $730 elc8 8 PIN CAT $190 elc8trx 8 PIN TeReX/ASV, TAKeuChI $190 elc14 14 PIN CASe, Nh, VOLVO, KuBOTA, jcb, GehL, MuSTANG, TAKeuChI $210 elc14jd 14 PIN john DeeRe $210 elc14cat 14 PIN CAT $210 elc14cathf 14 PIN CAT high FLOw $230 1 Compatible with Bobcat 7 pin CanBus electric control system. May not work on Bobcat loaders from 2012 or older. -All the above connectors utilize in cab controls. model description LOAdEr BrANd LiST elcacc 12 V ACCeSSORY PLuG 1 ALL, IF equipped $245 elcbat POweR SOuRCe 2 ALL $300 1 utilizes 12 volt accessory plug (cigarette lighter) in cab for power, includes magnetic box with switch for control. dozer BLAdE EdgE kit 5 8ˮ x 8 reversible double bevel steel edge. Includes all required hardware. For Virnig Dozer Blade only. model WidTh WEighT LiST DeK $265 DeK $315 DeK $350 2 utilizes power source (battery) of loader for power, includes 12 volt accessory outlet, 12 volt accessory plug and magnetic box with switch for control. model dzr72 dzr84 dzr96 Overall Blade width (Inches) Blade height (Inches) 25.8 Overall height (Inches) 28.1 Overall Depth (Inches) 38.0 Blade Angle (Degrees) +/- 30 width at Full Angle (Inches) Blade Oscillation (Degrees) +/- 10 Moldboard Thickness (Inches) Center edge (Inches) 5/8 x 8 Bolt-on Approximate weight (Pounds) Greater than 1800 pounds virnigmfg.com attachments@virnigmfg.com

45 STump BuCkET A versatile attachment ideal for digging stumps and rocks, trenching and breaking up compacted soil. LANdSCApiNg Tall sides provide capacity, while compact depth provides leverage to pry under stumps and rocks. Three flush mount shanks, with replaceable Series 23 cast teeth, welded to a ¾ x 6 weld-on wear edge. Bucket is reinforced on each side with three large gusset plates. Replacement teeth, pins and shanks available on page 59. model LiST STMP $1,050 model STmp Overall width (Inches) 45.6 Overall Depth (Inches) 46.3 Overall height (Inches) 20.7 Shovel width, Bottom (Inches) 16.0 Shovel width, Top (Inches) 23.8 Space Between Teeth (Inches) 3.3 Shovel Depth (Inches) 29.6 Shovel Depth, with Teeth (Inches) 37.3 Approximate weight (Pounds) 375 STump BuCkET grapple Grapple jaw makes stump and rock removal easier and secures load for transport. Tall sides provide capacity, while compact depth provides leverage to pry under stumps and rocks. Bucket is reinforced on each side with three large gusset plates bore, stroke cylinders featuring a corrosion, dent and flake resistant NitroSteel cylinder rod. Greasable 1 ¼ diameter cylinder pins and diameter hinge pins. Three flush mount shanks, with replaceable Series 23 cast teeth, welded to a ¾ˮ x 6ˮ weld-on wear edge. Cylinder Guard standard. Replacement teeth, pins and shanks available on page 59. model LiST STMPG $2,310 Price includes cylinder, fittings, couplers, and eaton hoses. model STmpg Overall Bucket width (Inches) 45.6 Bucket Depth (Inches) 46.3 Bucket height (Inches) 20.7 Shovel width, Bottom (Inches) 16.0 Shovel width, Top (Inches) 23.8 Tooth Space, Between Teeth (Inches) 3.3 Shovel Depth (Inches) 29.6 Shovel Depth, with Teeth (Inches) 37.3 Grapple jaw Opening (Inches) 39.0 Approximate weight (Pounds) 590 Greater than 1500 pounds 37 virnigmfg.com attachments@virnigmfg.com PRICeS effective 01/01/17. ALL INFO SuBjeCT TO ChANGe without NOTICe.

46 u-blade Patented double-point blade design enables digging and trenching in forward and reverse. Numerous uses including transplanting trees, digging rocks, trenching, and breaking up compacted soil. Open design provides excellent visibility and ensures the operator can quickly transplant trees, often without the help of others. 3 8" thick high-carbon steel blade. LANdSCApiNg ubv26 26 $1,185 ubv30 30 $1,295 ubv36 36 $1,370 model ubv26 ubv30 ubv36 Inside Blade Diameter (Inches) Approximate Digging Depth (Inches) 48.0* Approximate weight (Pounds) *Digging depth varies with size and brand of machine. TiLLEr Motor guarded on bottom and both sides. Direct drive eaton motor reduces downtime, no chains or belts. Bi-directional rotation allows tilling going forward or in reverse. TLR54 54 $4,815 TLR72 72 $5,140 Price includes couplers and eaton hoses. TiLLEr TiNE kit heat treated, dual-edge tiller tines. Includes all required hardware. For Virnig Tiller only. model WidTh qty WEighT LiST TLRTK $270 TLRTK $350 Tiller shaft supported on both ends by 2" diameter bearings, minimizing weight supported by motor. Offset to cover tire tracks and allows the operator to till next to buildings, sidewalks, etc. Replaceable, heat treated, dual-edge tines. model TLr54 TLr72 working width (Inches) Overall width (Inches) Loader width Coverage, Outside Tire (Inches) Overall height (Inches) 28.0 Overall Depth (Inches) 32.0 Tilling Depth (Inches) 6.0 working Offset (Inches) 7.0* 4.0* Recommended Flow Rate (GPM) Drum Diameter (Inches) 22.0 Number of Tines Approximate weight (Pounds) Greater than 1300 pounds *Distance between the center of the quick-tach plate and center of the working width. virnigmfg.com attachments@virnigmfg.com

47 TrEE BOOm LANdSCApiNg Adds 46 ½ (from top of quick tach) to the lifting height of the machine. Two 1/2 steel plates at the top of the boom with holes allow multiple rigging options. Pole is reinforced with three large gusset plates and two plates at the base. Front of the frame is flat to prevent damage to trees during transport. u se the holes in the sides of the frame to strap down and secure loads. model LiST TRBM $795 model TrBm Overall height (Inches) 65.5 Pole height, From Top of Quick Tach (Inches) 46.5 Overall width (Inches) 45.9 Pin hole Diameter (Inches) 1.1 weight (Pounds) 330 Greater than 1300 pounds 39 virnigmfg.com attachments@virnigmfg.com PRICeS effective 01/01/17. ALL INFO SuBjeCT TO ChANGe without NOTICe.

48 V40 AugEr drive Supports bits up to 30 in diameter. Planetary gear reduction assures consistent high torque output and long lifetime usage. Parker motor with an integrated hydraulic pressure relief valve for protection against pressure spikes. 2" hex output provides a stronger, more durable interface. LANdSCApiNg model LiST ADV30 $2,350 model AdV30 Max Standard/Tree Auger Bit Size (Inches) 30 Max Rock Auger Bit Size (Inches) 12 Recommended Flow Rate (GPM) Output 3000 PSI (ft.-lbs.) 2775 Output 20 GPM (RPM) 66 Approximate weight (Pounds) 360 V50 AugEr drive Supports bits up to 36 in diameter. Planetary gear reduction assures consistent high torque output and long lifetime usage. Parker motor with an integrated hydraulic pressure relief valve for protection against pressure spikes. 2" hex output provides a stronger, more durable interface. model LiST ADV36 $2,645 model AdV36 Max Standard/Tree Auger Bit Size (Inches) 36 Max Rock Auger Bit Size (Inches) 18 Recommended Flow Rate (GPM) Output 3000 PSI (ft.-lbs.) 3070 Output 20 GPM (RPM) 60 Approximate weight (Pounds) 360 virnigmfg.com attachments@virnigmfg.com

49 LANdSCApiNg AugEr BiTS STANdArd & TrEE BiTS For light to moderate ground conditions. One piece fabricated steel boring head. Double flighting with replaceable bolt-on teeth. 4' overall length with 2" hex collar input. Tree bits are smaller at the bottom to better keep trees in place while planting. SAV12 SAV18 STANdArd TEETh ANd point wisdom Gage Fishtail OpTiONAL TEETh Carbide wisdom Chisel model description Carbide Chisel LiST SAV6 6ˮ Standard Auger $270 Standard with factory installed wisdom Teeth, wisdom Gage Teeth, and Fishtail Point. Carbide wisdom and Chisel Teeth for hard, frozen ground available. Not designed to drill through solid rock. Length (inches) gage Teeth Wisdom Teeth Approximate Weight (pounds) SAV9 9ˮ Standard Auger $ SAV12 12ˮ Standard Auger $ SAV15 15ˮ Standard Auger $ SAV18 18ˮ Standard Auger $ SAV24 24ˮ Standard Auger $ SAV30 30ˮ Standard Auger $1, SAV36 36ˮ Standard Auger $1, TAV30 30ˮ Tree Auger $1, TAV36 36ˮ Tree Auger $1, rock BiTS For solid and fracturable rock, compacted soils, frozen ground, asphalt and concrete. Cast steel boring head. STANdArd Standard with factory installed Rotating Bullet Teeth and a CDR Rock Pilot. Single flighting with replaceable teeth. Bullet Pilot 4 overall length with 2 hex collar input. model description LiST Length (inches) Bullet Teeth Approximate Weight (pounds) RAV6 6ˮ Rock Auger $ RAV9 9ˮ Rock Auger $1, RAV12 12ˮ Rock Auger $1, RAV16 16ˮ Rock Auger $2, rav6 rav12 rav9 RAV18 18ˮ Rock Auger $2, AugEr EXTENSiONS FEV24 VEV48 12 Spacing model LiST WEighT description FeV24 $ " Fixed extension, 2" hex VeV48 $ " Variable extension, 2" hex AugEr AdApTErS AhrV ArhV model LiST WEighT description AhRV $ hex Female to 2 9/16 (O.D.) Round Male ARhV $ /16" Round Female to 2 (O.D.) Male 41 virnigmfg.com attachments@virnigmfg.com PRICeS effective 01/01/17. ALL INFO SuBjeCT TO ChANGe without NOTICe.

50 Big BALE grapple Two-cylinder grapple with large jaw opening allows handling of big round bales, while curved tines penetrate bales with minimal damage. Open bottom and back gives excellent visibility and allows debris to fall through bore, stroke cylinders featuring corrosion, dent and flake resistant NitroSteel cylinder rods. Greasable diameter hinge pins and 1 ¼ diameter cylinder pins. Teflon coated bushings provide lubrication at all pivot locations. Ag BG54 54 $3,965 BG72 72 $4,175 BG84 84 $4,360 Price includes cylinders, fittings, couplers, and eaton hoses. model Bg54 Bg72 Bg84 Overall Bucket width (Inches) Bucket Depth (Inches) 40.8 Bucket height (Inches) 30.8 Number Of Bucket Tines (with Sides) Space Between Tines (Inches) Bucket Tine Thickness (Inches) 0.5* Grapple Tine Thickness (Inches) 0.5* Number Of Grapple Teeth Space Between Grapple Teeth (Inches) Grapple jaw Opening (Inches) 73.4 Approximate weight (Pounds) Recommended loader capacity Greater than 2400 pounds *Tine Material is Grade 80 Plate (80,000 PSI Minimum Yield Strength). hay BuCkET grapple Two-cylinder grapple with large jaw opening allows handling of big round bales, while curved tines penetrate bales with minimal damage. 2 bore, stroke cylinders featuring corrosion, dent and flake resistant NitroSteel cylinder rods. Greasable diameter hinge pins and 1 ¼ diameter cylinder pins. Teflon coated bushings provide lubrication at all pivot locations ¾ x 6 weld-on cutting edge with holes to accept optional edges. hbg72 72 $4,480 hbg84 84 $4,665 Price includes cylinders, fittings, couplers, and eaton hoses. BOLT-ON EdgE installed item LiST BeV72A $280 BeV84A $330 SErrATEd EdgE installed item LiST SBeV72A $540 SBeV84A $625 model hbg72 hbg84 Overall Bucket width (Inches) Bucket Depth (Inches) 40.0 Bucket height (Inches) 31.4 Grapple Tine Thickness (Inches) 0.5* Number of Grapple Teeth 4 Space Between Grapple Teeth (Inches) 19.3 Grapple jaw Opening (Inches) 74.3 Bucket Struck Capacity (Cubic Feet) Bucket heaped Capacity (Cubic Feet) Structural wear Bars under Bucket (1/2 x 4 ) 5 5 Approximate weight (Pounds) Greater than 2400 pounds *Tine Material is Grade 80 Plate (80,000 PSI Minimum Yield Strength). virnigmfg.com attachments@virnigmfg.com

51 high dump BuCkET Increases vertical lift up to 44 and horizontal reach up to 13.

52 Two-cylinder hydraulic dump Increases lift and reach for easier loading. windows in bucket for increased visibility. Ag ¾ˮx 6ˮ weld-on edge with holes for optional edges. Ideal for loading feed mixers and trucks. Replaceable Teflon coated bushings provide lubrication at hinge locations. 2 bore, stroke cylinders featuring corrosion, dent and flake resistant NitroSteel cylinder rods. Greaseable diameter hinge pins and 1 ¼ diameter cylinder pins. Machine specific hydraulic package available. BOLT-ON EdgE installed SErrATEd EdgE installed Great for Toolcats DMP60 60 $3,980 DMP72 DMP $4,130 $4,285 DMP96 96 $4,460 item BeV60A LiST $235 BeV72A BeV84A $280 $330 BeV96A $365 item LiST SBeV60A $455 SBeV72A $540 SBeV84A $625 SBeV96A $710 Price includes cylinders, fittings, couplers, and eaton hoses. model dmp60 dmp72 dmp84 dmp96 Overall Bucket width (Inches) Bucket Depth (Inches) 47.3 Bucket height (Inches) 29.8 window height (Inches) 4.0 Dump Angle (Degrees) 86.0 Struck Capacity (Cubic Feet) heaped Capacity (Cubic Feet) Structural wear Bars under Bucket (1/2 x 4 ) Approximate weight (Pounds) Greater than 1800 pounds PRICeS effective 01/01/17. ALL INFO SuBjeCT TO ChANGe without NOTICe. virnigmfg.com attachments@virnigmfg.com

53 hay handling, machine pointed SpEArS Removable machine pointed spears are an economical hay handling tool. Main spears and stabilizers made from 1045 Cold Finished Stress Relieved round stock. BSV48 LiST: $665 Ag One 2" x 48" main spear, Two 1 ½" x 18 stabilizers. One bale maximum. Commonly called Round Bale Spear. BFV48 LiST: $750 Two 2" x 48" spears. One bale maximum. Commonly called Bale Fork. CBV48 LiST: $755 One 1 ¾" x 42" main spear, Three 1 ¾" x 30" stabilizers. One bale maximum. Commonly called Round/Square Bale Combo Spear. SSV48 LiST: $660 Three 1 ¾" x 30" spears. One bale maximum. Commonly called Square Bale Spear. BASS66 LiST: $780 Two 1 ¾" x 42" main spears, Two 1 ¾" x 30" stabilizers. One bale maximum. Commonly called Big Square Bale Spear. model BSV48 BFV48 CBV48 SSV48 BASS66 Frame width (Inches) Number of Main Spears* Main Spear usable Length (Inches) Number of Stabilizer Spears* Stabilizer Spear usable Length (Inches) Approximate weight (Pounds) Capacity, w/ Bale Against Frame (Pounds) 2000 *1045 CFSR Round Material (100,000 PSI Minimum Yield Strength). 45 virnigmfg.com attachments@virnigmfg.com PRICeS effective 01/01/17. ALL INFO SuBjeCT TO ChANGe without NOTICe.

54 hay handling, FOrgEd SpEArS Removable spears are forged and tapered to make piercing compacted bales easier. BSV48F LiST: $700 One 49" Conus II forged main spear, Two 1 ½" x 18 machine pointed stabilizers. One bale maximum. Commonly called Forged Round Bale Spear. Ag BFV48F LiST: $850 Two 49" Conus II forged spears. One bale maximum. Commonly called Forged Bale Fork. CBV48F LiST: $890 One 49" Conus II forged main spear, Three 32" Conus I forged stabilizers. One bale maximum. Commonly called Forged Round/Square Bale Combo Spear. SSV48F LiST: $730 Three 32" Conus I forged spears. One bale maximum. Commonly called Forged Square Bale Spear. BASS66F LiST: $850 Four 32 Conus I forged spears. One bale maximum. Commonly called Forged Big Square Bale Spear. model BSV48F BFV48F CBV48F SSV48F BASS66F Frame width (Inches) Number of Main Spears Main Spear usable Length (Inches) Number of Stabilizer Spears Stabilizer Spear usable Length (Inches) Approximate weight (Pounds) Capacity, w/ Bale Against Frame (Pounds) 2000 virnigmfg.com attachments@virnigmfg.com

55 rubber manure SCrApEr Deep-angled design and one-piece lower rubber eliminates spillage. 1 ½" x 10" reversible, replaceable rubber edges allow 6" of total wear. upper pull back cleans material in tight spaces. Ag has been effectively used as a snow pusher for small skid steer loaders and compact tractors. SMR72 72 $1,960 SMR84 84 $2,135 SMR96 96 $2,310 model Smr72 Smr84 Smr96 Overall width (Inches) upper Rubber width (Inches) Overall height (Inches) 25.0 Overall Depth (Inches) 52.2 Inner Depth (Inches) 35.3 Approximate weight (Pounds) manure SLurry BuCkET Top formed profile to limit spillage and rolled inside profile for easier clean out. 60 degree back angle to better hold in slurry material. ¾" x 6" weld-on cutting edge with holes to accept optional edges. Reversible, replaceable bolt-on side wear edges. BOLT-ON EdgE installed Cross Section manure SLurry BuCkET SidE WEAr EdgE kit MSB66 66 $1,485 MSB72 72 $1,695 MSB78 MSB $1,765 $1,835 item LiST BeV66A $250 BeV72A $280 BeV78A BeV84A $310 $330 Two 5 8ˮ x 6" reversible double bevel steel edges. Includes all required hardware. For Virnig Manure Slurry Bucket only. model WidTh WEighT LiST MSBSeK ALL 20 $100 model msb66 msb72 msb78 msb84 Overall Bucket width (Inches) Bucket Depth (Inches) 37.0 Bucket height (Inches) 25.3 Struck Capacity (Cubic Feet) heaped Capacity (Cubic Feet) Structural wear Bars under Bucket (1/2 x 4 ) Approximate weight (Pounds) Greater than 1500 pounds 47 virnigmfg.com attachments@virnigmfg.com PRICeS effective 01/01/17. ALL INFO SuBjeCT TO ChANGe without NOTICe.

56 FEEd pusher Five width adjustments keeps feed away from tires. e ight angle adjustments keeps feed moving efficiently. 1 ½" x 10" reversible, replaceable rubber edge allows 6" of total wear. Ag model WidTh LiST fpv ADjuSTABLe, See TABLe $1,495 model FpV Minimum Angle (Degrees) 38.4 Maximum Angle (Degrees) 71.7 Minimum Push width (Inches) 30.1 Maximum Push width (Inches) 75.2 Minimum Discharge Distance (Inches)-(Measured from Center Line of Loader) 48.7 Maximum Discharge Distance (Inches)-(Measured from Center Line of Loader) 66.0 Blade height (Inches) 20.0 Blade Length (Inches) 96.0 Approximate weight (Pounds) 520 V40 utility FOrk Tines easily penetrate piles and low profile allows excellent visibility. 1 ¾ˮ diameter, 1045 CFSR tines require no maintenance and are removable for easy replacement. MV60 60 $1,380 MV66 66 $1,455 MV72 72 $1,630 MV78 78 $1,685 model mv60 mv66 mv72 mv78 Overall Bucket width (Inches) Bucket Depth (Inches) 33.5 Bucket height (Inches) 21.5 Number of Tines Space Between Tines (Inches) Tine Diameter (Inches) 1.75* Approximate weight (Pounds) Less than 2400 pounds *Tine Material is 1045 CFSR Round (100,000 PSI Minimum Yield Strength). virnigmfg.com attachments@virnigmfg.com

57 pallet FOrkS V50 WALk-ThrOugh pallet FOrk 3 8ˮ Grade 80 rail and 1 4ˮ x 2ˮ flat steel backrest. walk-through design allows quick cab access. Optimized for skid loader use with angled mount plate and high visibility back rest flush with tines. Standard with adjustable, ITA Class II forged tines. See table below for capacity. Comes with one step and hardware to install on either side. usa made TiNES 5 pack model CApACiTy LiST NET EA. 1 wrpf42 4,000 $1,020 $590 wrpf48 4,000 $1,045 $595 wrpf42t 5,500 $1,140 $650 wrpf48t 5,500 $1,165 $660 Same frame for usa and Global Tines. globally SOurCEd TiNES 5 pack model CApACiTy LiST NET EA. 1 wrpf42g 4,000 $900 $513 wrpf48g 4,000 $910 $518 wrpf42tg 5,500 $935 $533 wrpf48tg 5,500 $945 $ purchase in groups of 5 of a model number. Must purchase in groups of 5 of a model number for net price above. Cannot mix tine lengths or wrpf s, erpf s and hrpf s to get to 5. See page 50 for full details. model WrpF42/ WrpF42g WrpF48/ WrpF48g Frame width (Inches) 45.5 height (Inches) 40.6 WrpF42T/ WrpF42Tg WrpF48T/ WrpF48Tg Tine Length (Inches) Tine Thickness (Inches) Approximate weight (Pounds) Capacity (Pounds) Less than 2400 pounds V50 rail pallet FOrk 3 8ˮ Grade 80 rail and 3 16ˮ Grade 50 brickguard. Optimized for skid loader use with angled mount plate and high visibility brickguard flush with tines. Standard with adjustable, ITA Class II forged tines. See table below for capacity. Comes with one step and hardware to install on either side. Same erpf frame Virnig has always made now with usa and Global tines. usa made TiNES model CApACiTy LiST erpf42 4,000 $1,020 erpf48 4,000 $1,045 erpf42t 5,500 $1,140 erpf48t 5,500 $1,165 5 pack NET EA. 1 $590 $595 $650 $660 globally SOurCEd TiNES model CApACiTy LiST erpf42g 4,000 $900 erpf48g 4,000 $910 erpf42tg 5,500 $935 erpf48tg 5,500 $945 5 pack NET EA. 1 $513 $518 $533 $ purchase in groups of 5 of a model number. Must purchase in groups of 5 of a model number for net price above. Cannot mix tine lengths or wrpf s, erpf s and hrpf s to get to purchase 10 to have dealer name cut into the brickguard. Minimum of 10 forks to have dealer name cut into brickguard. Able to mix groups of 5 to get to the 10 fork minimum. model ErpF42/ ErpF42g ErpF48/ ErpF48g Frame width (Inches) 45.5 height (Inches) 40.0 ErpF42T/ ErpF42Tg ErpF48T/ ErpF48Tg Tine Length (Inches) Tine Thickness (Inches) Approximate weight (Pounds) Capacity (Pounds) Less than 2400 pounds See page 50 for full details. 49 virnigmfg.com attachments@virnigmfg.com PRICeS effective 01/01/17. ALL INFO SuBjeCT TO ChANGe without NOTICe.

58 V60 rail pallet FOrk 1 2ˮ Grade 50 beveled rail and 1 4ˮ Grade 50 brickguard. w ider than the Rail Pallet Fork to keep large loads secure. Optimized for skid loader use with angled mount plate and high visibility brickguard flush with tines. Standard with adjustable, ITA Class II forged tines. See table below for capacity. Comes with one step and hardware to install on either side. usa made TiNES 5 pack model CApACiTy LiST NET EA. 1 hrpf $1,400 $845 hrpf $1,595 $945 Same hrpf frame Virnig has always made now with usa and Global tines. pallet FOrkS globally SOurCEd TiNES 5 pack model CApACiTy LiST NET EA. 1 hrpf48g 6200 $1,250 $738 hrpf60g 5500 $1,445 $ purchase in groups of 5 of a model number. Must purchase in groups of 5 of a model number for net price above. Cannot mix tine lengths or wrpf s, erpf s and hrpf s to get to purchase 10 to have dealer name cut into the brickguard. Minimum of 10 forks to have dealer name cut into brickguard. Able to mix groups of 5 to get to the 10 fork minimum. See full details below. model hrpf48/ hrpf48g Frame width (Inches) 54.5 height (Inches) 40.0 hrpf60/ hrpf60g Tine Length (Inches) Tine Thickness (Inches) Approximate weight (Pounds) Capacity (Pounds) Greater than 2400 pounds 2017 pallet FOrk program V50 WALk-ThrOugh pallet FOrkS wrpf42 wrpf48 wrpf42t wrpf48t wrpf42g wrpf48g wrpf42tg wrpf48tg 5 10 $590 net each $595 net each $650 net each $660 net each $513 net each $518 net each $533 net each $538 net each V50 rail pallet FOrkS erpf42 erpf48 erpf42t erpf48t erpf42g erpf48g erpf42tg erpf48tg $590 net each $595 net each $650 net each $660 net each $513 net each $518 net each $533 net each $538 net each V60 heavy rail pallet FOrkS hrpf48 hrpf60 hrpf48g hrpf60g purchase in groups of 5 of a model number. Must purchase in groups of 5 of a model number for net price above. Cannot mix tine lengths or wrpf s, erpf s and hrpf s to get to 5. purchase 10 to have dealer name cut into the brickguard. Minimum of 10 forks to have dealer name cut into brickguard. Able to mix groups of 5 to get to the 10 fork minimum. details If not purchasing in a group of 5, the printed list price in the 2017 Price Book applies. example: Dealer wants to purchase 6 forks. 5 would be sold at the 5-pack price and 6th would be at 2017 printed list price. Dealer discount would apply to the 6th fork. Pallet Forks with a custom brickguard cannot be canceled or returned Pallet Fork list price applies towards standard order discount (see page 78). $845 net each $945 net each $738 net each $838 net each virnigmfg.com attachments@virnigmfg.com

59 V50 multi-purpose BuCkET (4-iN-1) Multiple functions in one attachment to save time and money including dozing, clamming, leveling, and bottom dumping. Guarded two-cylinder design. BuCkETS 2 bore, stroke cylinders, and NitroSteel cylinder rods. Greasable diameter hinge pins and 1 ¼ diameter cylinder pins. 5 8 x 6 reversible, replaceable bolt-on edge at rear of clam and front of dozer. ¾ x 6 weld-on cutting edge with holes to accept optional edges model MPV60 WidTh 60 LiST $3,845 MPV66 MPV $3,925 $4,005 Price includes cylinders, fittings, couplers, and eaton hoses. BOLT-ON EdgE installed 1 item LiST BeV60A $235 BeV66A $250 BeV72A $280 SErrATEd EdgE installed item LiST SBeV60A $455 SBeV66A $495 SBeV72A $540 WELd-ON TEETh installed item LiST wsw60 $285 wsw66 $330 wsw72 $380 1 Toothbar edge options available on page 60. OpTiON: holding VALVE w hen external loads are applied, the valve increases the holding force of the hydraulic cylinders. works with all Virnig Multi-Purpose Buckets. model LOAdEr BrANd LiST MPVhV-L BOBCAT, CAT, KuBOTA, TeReX/ASV $235 MPVhV-C CASe, Nh, john DeeRe, ALL OTheRS $235 model mpv60 mpv66 mpv72 Overall Bucket width (Inches) Bucket Depth (Inches) 36.3 Bucket height (Inches) 21.3 Dozer width (Inches) Clam Opening (Inches) 33.0 Shell Thickness (Inches) 0.19 hinge Structure Thickness (Inches) Structural wear Bars under Bucket (1/2 x 4 ) Approximate weight (Pounds) Less than 2400 pounds 51 virnigmfg.com attachments@virnigmfg.com PRICeS effective 01/01/17. ALL INFO SuBjeCT TO ChANGe without NOTICe.

60 V60 multi-purpose BuCkET (4-iN-1) Multiple functions in one attachment to save time and money including dozing, clamming, leveling, and bottom dumping. The 1/4 shell, additional bracing, 1/2 hinge structure and reinforcement at rear corners of dozer and quick-tach plate. Guarded two-cylinder design. 2 ½ bore, stroke cylinders, and NitroSteel rods. Greasable diameter hinge pins and 1 ¼ diameter cylinder pins. BuCkETS 5 8 x 6 reversible, replaceable bolt-on edge at rear of clam and front of dozer. ¾ x 6 weld-on cutting edge with holes to accept optional edges. model hmpv66 WidTh 66 LiST $4,155 hmpv72 72 $4,235 hmpv78 hmpv $4,435 $4,515 Price includes cylinders, fittings, couplers, and eaton hoses. BOLT-ON EdgE installed 1 item LiST BeV66A $250 BeV72A $280 BeV78A $310 BeV84A $330 SErrATEd EdgE installed item LiST SBeV66A $495 SBeV72A $540 SBeV78A $585 SBeV84A $625 WELd-ON TEETh installed item LiST wsw66 $330 wsw72 $380 wsw78 $425 wsw84 $470 1 Toothbar edge options available on page 60. OpTiON: holding VALVE w hen external loads are applied, the valve increases the holding force of the hydraulic cylinders. works with all Virnig Multi-Purpose Buckets. model LOAdEr BrANd LiST MPVhV-L BOBCAT, CAT, KuBOTA, TeReX/ASV $235 MPVhV-C CASe, Nh, john DeeRe, ALL OTheRS $235 model hmpv66 hmpv72 hmpv78 hmpv84 Overall Bucket width (Inches) Bucket Depth (Inches) 36.3 Bucket height (Inches) 21.3 Dozer width (Inches) Clam Opening (Inches) 33.0 Shell Thickness (Inches) 0.25 hinge Structure Thickness (Inches) 0.5 Structural wear Bars under Bucket (1/2 x 4 ) Approximate weight (Pounds) Greater than 2400 pounds virnigmfg.com attachments@virnigmfg.com

61 -ThE OrigiNAL- SkELETON rock BuCkET rock BuCkETS In the early 2000 s, most rock buckets had a solid, vertical back and used round shaft for the bottom tines. Others used round shaft for the back and sides as well. The design worked, but was heavy and expensive. Brothers Dean Virnig (owner) and Darin Virnig (head engineer) kicked around ideas for months and one quiet Friday afternoon changed the way skid steer rock buckets were made. The tines were cut from Grade 80 flat steel and orientated vertically to give it the necessary open bottom, back, and sides. Shaping it like a dirt bucket and adding a rock dam in the middle meant easy use for any operator. Strategic gusseting and one-piece tines gave it strength without excessive weight. Over a decade later it is safe to say the idea has stuck. Others have tried to copy it, but there is only one Original Skeleton Rock Bucket. V40 SkELETON rock BuCkET V50 SkELETON rock BuCkET V60 SkELETON rock BuCkET e very other tine is constructed of one piece of steel, from tip to top brace, to add rigidity. every tine is made from 3 8 Grade 50 steel. ~3 tine spacing. model Wd WgT LiST BSRV $1,375 BSRV $1,425 BSRV $1,525 e very tine is constructed of one piece of 3 8 Grade 80 steel, from tip to top brace, to add rigidity. ~3 tine spacing. model Wd WgT LiST SRV $1,610 SRV $1,660 SRV $1,710 SRV $1,755 SRV $1,795 every tine is constructed of one piece of ½ Grade 80 steel, from tip to top brace, to add rigidity. ~4 tine spacing. model Wd WgT LiST hsrv $1,825 hsrv $1,875 hsrv $2,020 hsrv $2,090 SpECS depth/height 39.9 /20.5 Number of Tines Tine Spacing 2.9 Tine Thickness 3/8, Grade 50 Loader Capacity < 2400 lbs SpECS depth/height 42.9 /21.5 Number of Tines Tine Spacing 2.9 Tine Thickness 3/8, Grade 80 Loader Capacity > 1500 lbs SpECS depth/height 42.9 /21.5 Number of Tines Tine Spacing ~4 Tine Thickness 1/2, Grade 80 Loader Capacity > 1800 lbs 53 virnigmfg.com attachments@virnigmfg.com PRICeS effective 01/01/17. ALL INFO SuBjeCT TO ChANGe without NOTICe.

62 V50 utility BuCkET General-purpose bucket suited for dense and bulk materials. ¾ˮx6 weld-on edge with holes to accept optional edges. Standard Top Form Bracing uhv60 60 $1,090 uhv66 66 $1,120 uhv72 uhv $1,210 $1,400 uhv84 84 $1,440 BOLT-ON EdgE installed item BeV60A LiST $235 BeV66A $250 BeV72A BeV78A $280 $310 BeV84A $330 SErrATEd EdgE installed item LiST SBeV60A $455 SBeV66A $495 SBeV72A $540 SBeV78A $585 SBeV84A $625 BuCkETS Cross Section model uhv60 uhv66 uhv72 uhv78 uhv84 Overall Bucket width (Inches) Bucket Depth (Inches) 35.6 Bucket height (Inches) 24.0 Struck Capacity (Cubic Feet) heaped Capacity (Cubic Feet) Bucket Back Angle (Degrees) 66 Shell Thickness (Inches) Side Plate Thickness (Inches) 0.25 Structural wear Bars under Bucket (1/2 x 4 ) Approximate weight (Pounds) Less than 2400 pounds V60 utility BuCkET hd bracing better reinforces bucket. h eavily constructed general-purpose bucket suited for dense and bulk materials. h eavy-duty top bracing, extra wear bars underneath and an additional interior brace plate for reinforcement. ¾ˮx6 weld-on edge with holes to accept optional edges. BOLT-ON EdgE installed SErrATEd EdgE installed extra Reinforcement Inside Bucket huhv72 huhv $1,620 $1,690 huhv84 84 $1,755 huhv90 huhv $1,825 $1,895 item LiST BeV72A $280 BeV78A $310 BeV84A BeV90A $330 $340 BeV96A $365 item LiST SBeV72A $540 SBeV78A $585 SBeV84A $625 SBeV90A $665 SBeV96A $710 model huhv72 huhv78 huhv84 huhv90 huhv96 Overall Bucket width (Inches) Bucket Depth (Inches) 37.6 Bucket height (Inches) 24.9 Struck Capacity (Cubic Feet) heaped Capacity (Cubic Feet) Bucket Back Angle (Degrees) 66 Shell Thickness (Inches) 0.25 Side Plate Thickness 0.25 Structural wear Bars under Bucket (1/2 x 4 ) Approximate weight (Pounds) Greater than 2400 pounds virnigmfg.com attachments@virnigmfg.com

63 V40 LOW profile dirt BuCkET A lighter, more compact version of the V50 Dirt Bucket. Low profile for better visibility of cutting edge. BuCkETS ¾" x 6" weld-on cutting edge with holes to accept optional bolt-on or serrated bolt-on edge. STANdArd profile BuCkETS model edv60 WidTh 60 LiST $765 edv66 66 $820 edv72 edv $880 $955 edv84 84 $1,005 BOLT-ON EdgE installed 1 item LiST BeV60A $235 BeV66A $250 BeV72A $280 BeV78A $310 BeV84A $330 SErrATEd EdgE installed 1 item LiST SBeV60A $455 SBeV66A $495 SBeV72A $540 SBeV78A $585 SBeV84A $625 1 weld-on Teeth and Toothbars not available for this bucket. model EdV60 EdV66 EdV72 EdV78 EdV84 Overall Bucket width (Inches) Bucket Depth (Inches) 32.4 Bucket height (Inches) 20.0 Inside Bucket width (Inches) Inside Bucket Depth (Inches) 31.7 Struck Capacity (Cubic Feet) heaped Capacity (Cubic Feet) Shell Thickness (Inches) 0.19 Side Plate Thickness (Inches) 0.19 Structural wear Bars under Bucket ( 1 2ˮ x 3 ) Approximate weight (Pounds) Less than 2000 pounds 55 virnigmfg.com attachments@virnigmfg.com PRICeS effective 01/01/17. ALL INFO SuBjeCT TO ChANGe without NOTICe.

64 V50 LOW profile dirt BuCkET Standard Top Form Bracing Low profile and extended bottom for better visibility of cutting edge. ¾" x 6" weld-on cutting edge with holes to accept optional edges. Shell thickness differs between models; see chart. BuCkETS Cross Section STANdArd profile BuCkETS DhV60eX 60 $1,095 DhV66eX 66 $1,130 DhV72eX 72 $1,215 DhV78eX 78 $1,410 DhV84eX 84 $1,450 BOLT-ON EdgE installed 1 item LiST BeV60A $235 BeV66A $250 BeV72A $280 BeV78A $310 BeV84A $330 SErrATEd EdgE installed item LiST SBeV60A $455 SBeV66A $495 SBeV72A $540 SBeV78A $585 SBeV84A $625 WELd-ON TEETh installed item LiST wsw60 $285 wsw66 $330 wsw72 $380 wsw78 $425 wsw84 $470 1 Toothbar edge options available on page 60. grading Bend permits better grading in reverse than standard profile. grading Bend Buckets come with rolled inside. rolled inside makes clean out easier than a standard profile bucket. Cross Section grading BENd BuCkETS BOLT-ON EdgE installed 1 SErrATEd EdgE installed WELd-ON TEETh installed DhV60eX-GB 60 $1,105 DhV66eX-GB 66 $1,175 DhV72eX-GB 72 $1,250 DhV78eX-GB 78 $1,385 DhV84eX-GB 84 $1,445 item LiST BeV60A $235 BeV66A $250 BeV72A $280 BeV78A $310 BeV84A $330 item LiST SBeV60A $455 SBeV66A $495 SBeV72A $540 SBeV78A $585 SBeV84A $625 item LiST wsw60 $285 wsw66 $330 wsw72 $380 wsw78 $425 wsw84 $470 1 Toothbar edge options available on page 60. model dhv60ex/ dhv60ex-gb* dhv66ex/ dhv66ex-gb* dhv72ex/ dhv72ex-gb* dhv78ex/ dhv78ex-gb* dhv84ex/ dhv84ex-gb* Overall Bucket width (Inches) Bucket Depth (Inches) 34.6 / 35.8 Bucket height (Inches) 20.5 Struck Capacity (Cubic Feet) heaped Capacity (Cubic Feet) Bucket Back Angle (Degrees) 66 Shell Thickness (Inches) / / / 0.19 Side Plate Thickness (Inches) 0.25 Structural wear Bars under Bucket (1/2 x 4 ) Approximate weight (Pounds) 460 / / / / / 635 *V50 Dirt Bucket / V50 Dirt Bucket with Grading Bend. Less than 2400 pounds virnigmfg.com attachments@virnigmfg.com

65 V60 LOW profile dirt BuCkET BuCkETS hd bracing better reinforces bucket. Low profile and extended bottom for better visibility of cutting edge. h eavy-duty top bracing, extra wear bars underneath and an additional interior brace plate for reinforcement. ¾ x 6 weld-on cutting edge with holes to accept optional edges. extra Reinforcement Inside Bucket STANdArd profile BuCkETS hdhv72 72 $1,420 hdhv78 78 $1,480 hdhv84 84 $1,550 hdhv90 90 $1,610 hdhv96 96 $1,665 BOLT-ON EdgE installed 1 item LiST BeV72A $280 BeV78A $310 BeV84A $330 BeV90A $340 BeV96A $365 SErrATEd EdgE installed item LiST SBeV72A $540 SBeV78A $585 SBeV84A $625 SBeV90A $665 SBeV96A $710 WELd-ON TEETh installed item LiST wsw72 $380 wsw78 $425 wsw84 $470 wsw90 $470 wsw96 $515 1 Toothbar edge options available on page 60. grading Bend permits better grading in reverse than standard profile. grading Bend Buckets come with rolled inside. rolled inside makes clean out easier than a standard profile bucket. Cross Section grading BENd BuCkETS BOLT-ON EdgE installed 1 SErrATEd EdgE installed WELd-ON TEETh installed hdhv72-gb 72 $1,520 hdhv78-gb 78 $1,585 hdhv84-gb 84 $1,650 hdhv90-gb 90 $1,710 hdhv96-gb 96 $1,775 item LiST BeV72A $280 BeV78A $310 BeV84A $330 BeV90A $340 BeV96A $365 item LiST SBeV72A $540 SBeV78A $585 SBeV84A $625 SBeV90A $665 SBeV96A $710 item LiST wsw72 $380 wsw78 $425 wsw84 $470 wsw90 $470 wsw96 $515 1 Toothbar edge options available on page 60. model hdhv72/ hdhv72-gb* hdhv78/ hdhv78-gb* hdhv84/ hdhv84-gb* hdhv90/ hdhv90-gb* hdhv96/ hdhv96-gb* Overall Bucket width (Inches) Bucket Depth (Inches) 34.6 / 35.8 Bucket height (Inches) 20.5 Struck Capacity (Cubic Feet) heaped Capacity (Cubic Feet) Bucket Back Angle (Degrees) 66 Shell Thickness (Inches) 0.25 Side Plate Thickness (Inches) 0.25 Structural wear Bars under Bucket (1/2 x 4 ) Approximate weight (Pounds) 700 / / / / / 895 *V60 Dirt Bucket / V60 Dirt Bucket with Grading Bend. Greater than 2400 pounds 57 virnigmfg.com attachments@virnigmfg.com PRICeS effective 01/01/17. ALL INFO SuBjeCT TO ChANGe without NOTICe.

66 V40 SNOW/LighT material BuCkET 3 16ˮ shell and side plates, and 3 8ˮ thick side edges and gussets. ¾" x 6" weld-on cutting edge with holes to accept optional edges. NOTe: SLhV96 has two 3 8ˮ thick vertical braces inside bucket. Similar to the V50 Snow Bucket. SLhV60 60 $1,270 SLhV66 66 $1,290 SLhV72 72 $1,295 SLhV78 78 $1,405 SLhV84 84 $1,480 SLhV96 96 $1,715 BOLT-ON EdgE installed 1 item LiST BeV60A $235 BeV66A $250 BeV72A $280 BeV78A $310 BeV84A $330 BeV96A $365 1 Serrated edge options available on page 59. model SLhV60 SLhV66 SLhV72 SLhV78 SLhV84 SLhV96 Overall Bucket width (Inches) Bucket Depth (Inches) 37.6 Bucket height (Inches) 26.6 Struck Capacity (Cubic Feet) heaped Capacity (Cubic Feet) Bucket Back Angle (Degrees) 68 Shell Thickness (Inches) 0.19 Side Plate Thickness (Inches) 0.19 Structural wear Bars under Bucket (1/2 x 4 ) Approximate weight (Pounds) Less than 2400 pounds BuCkETS V50 SNOW/LighT material BuCkET MShV72 72 $1,605 MShV78 78 $1,635 MShV84 84 $1,700 MShV96 96 $1,760 MShV $1,825 BOLT-ON EdgE installed 1 item LiST BeV72A $280 BeV78A $310 BeV84A $330 BeV96A $365 BeV101A $375 1 Serrated edge options available on page 59. V60 SNOW/LighT material BuCkET extra Reinforcement Inside Bucket 3 16ˮ shell, 1 4ˮ sides, and 3 8ˮ thick side edges and gussets. Two 3 8ˮ thick vertical braces inside bucket make it more rigid. ¾" x 6" weld-on cutting edge with holes to accept optional edges. model mshv72 mshv78 mshv84 mshv96 mshv101 Overall Bucket width (Inches) Bucket Depth (Inches) 40.6 Bucket height (Inches) 29.8 window height (Inches) 8.0 Struck Capacity (Cubic Feet) heaped Capacity (Cubic Feet) Bucket Back Angle (Degrees) 68 Shell Thickness (Inches) 0.19 Side Plate Thickness (Inches) 0.25 Structural wear Bars under Bucket (1/2 x 4 ) Approximate weight (Pounds) Greater than 1800 pounds h eavy-duty, 1 4ˮ thick shell and sides, and 3 8ˮ thick side edges and gussets. Two 1 2ˮ thick vertical braces inside bucket make it more rigid. ¾" x 6" weld-on cutting edge with holes to accept optional edges. model SBhV78 WidTh 78 LiST $2,360 SBhV84 84 $2,430 SBhV96 96 $2,500 SBhV $2,575 BOLT-ON EdgE installed 1 item BeV78A LiST $310 BeV84A $330 BeV96A $365 BeV101A $375 1 Serrated edge options available on page 59. model SBhV78 SBhV84 SBhV96 SBhV101 Overall Bucket width (Inches) Bucket Depth (Inches) 45.5 Bucket height (Inches) 40.5 window height (Inches) 12.0 Struck Capacity (Cubic Feet) heaped Capacity (Cubic Feet) Bucket Back Angle (Degrees) 68 Shell Thickness (Inches) 0.25 Side Plate Thickness (Inches) 0.25 Structural wear Bars under Bucket (1/2 x 4 ) Approximate weight (Pounds) Greater than 2400 pounds virnigmfg.com attachments@virnigmfg.com

67 BuCkET EdgE OpTiONS A variety of edge options to make a Virnig bucket more versatile and last longer. Available for all buckets except skeleton style, unless noted. EdgE OpTiONS STANdArd BOLT-ON EdgE Reversible 5 8" x 8" bolt-on wear edge with 5 8" plow bolt holes spaced 6" on center. holes/ SiZE BOLTS WEighT 60" " " " " " " " BOLT-ON EdgE 1 BOLT-ON EdgE W/ hardware 2 BOLT-ON EdgE installed 3 item LiST item LiST item LiST BeV60 $205 BeV60h $220 BeV60A $235 BeV66 $220 BeV66h $235 BeV66A $250 BeV72 $245 BeV72h $265 BeV72A $280 BeV78 $270 BeV78h $295 BeV78A $310 BeV84 $290 BeV84h $315 BeV84A $330 BeV90 $300 BeV90h $325 BeV90A $340 BeV96 $320 BeV96h $350 BeV96A $365 BeV101 $335 BeV101h $360 BeV101A $375 1 Standard Bolt-on edge only. 2 Standard Bolt-on edge with mount hardware included. 3 Standard Bolt-on edge installed on bucket. SErrATEd BOLT-ON EdgE e xcellent alternative to toothbar for chiseling and breaking up compacted soil. ¾" x 8" single bevel, serrated edge with 5 8" plow bolt holes spaced 6" on center. SErrATEd BOLT-ON EdgE 1 SErrATEd EdgE W/ hardware 2 SErrATEd EdgE installed 3 holes/ SiZE BOLTS WEighT item LiST item LiST item LiST 60" SBeV60 $425 SBeV60h $440 SBeV60A $455 66" SBeV66 $465 SBeV66h $480 SBeV66A $495 72" SBeV72 $505 SBeV72h $525 SBeV72A $540 78" SBeV78 $545 SBeV78h $570 SBeV78A $585 84" SBeV84 $585 SBeV84h $610 SBeV84A $625 90" SBeV90 $625 SBeV90h $650 SBeV90A $665 96" SBeV96 $665 SBeV96h $695 SBeV96A $710 1 Serrated Bolt-on edge only. 2 Serrated Bolt-on edge with mount hardware included. 3 Serrated Bolt-on edge installed on bucket. BuCkET pin, TOOTh (SEriES 23) ANd ShANk ShANK Cast pin-on tooth. Flush mount weld-on shank. each part listed below is sold separately. See below for correct part numbers. PIN TOOTh NOTE: These parts are not compatible with teeth on hydraulic Scarifier for Land Leveler. Please call for pricing and availability. model 1062PP 1060PP 5807VP 1119PP 1552VP descr. PIN TOOTh ShANK Tw ShANK TB ShANK COmpATiBLE WiTh RRG, STMP, STMPG, MPV, hmpv, DIRT BuCKeTS, TOOThBARS RRG, STMP, STMPG, MPV, hmpv, DIRT BuCKeTS, TOOThBARS STMP, STMPG, MPV, hmpv, DIRT BuCKeTS TOOThBAR OVeR weld-on edge TOOThBAR OVeR BOLT-ON edge LiST $3.95 $10.95 $19.50 $19.50 $ virnigmfg.com attachments@virnigmfg.com PRICeS effective 01/01/17. ALL INFO SuBjeCT TO ChANGe without NOTICe.

68 TOOThBAr OVEr WELd-ON EdgE Replaceable Series 23 cast teeth extend life of bucket. Available on Virnig V50 & V60 Dirt Buckets and Multi-Purpose Buckets only. Not available for V40 Dirt Buckets. replaceable CAST TEETh 1 SiZE NumBEr OF TEETh item LiST WEighT 60" 6 Tw-60w $ " 7 Tw-66w $ " 8 Tw-72w $ " 9 Tw-78w $ " 10 Tw-84w $ " 11 Tw-90w $ " 12 Tw-96w $ EdgE OpTiONS TOOThBAr OVEr WELd-ON & BOLT-ON EdgE Replaceable Series 23 cast teeth extend life of bucket. 1 Toothbars built to fit Virnig Manufacturing attachments only. Replacement Pin, Tooth, and Shank available on page 59. Available on Virnig V50 & V60 Dirt Buckets and Multi-Purpose Buckets only. Not available for V40 Dirt Buckets. replaceable CAST TEETh 1 SiZE NumBEr OF TEETh item LiST WEighT 60" 6 TB-60w $ " 8 TB-66w $ " 8 TB-72w $ " 10 TB-78w $ " 10 TB-84w $ " 12 TB-90w $1, " 12 TB-96w $1, WELd-ON TEETh (FACTOry installed) Replaceable Series 23 cast teeth with cast shank welded directly to the bucket edge. 1 Toothbars built to fit Virnig Manufacturing attachments only. Replacement Pin, Tooth, and Shank available on page 59. Available on Virnig V50 & V60 Dirt Buckets and Multi-Purpose Buckets only. Not available for V40 Dirt Buckets. replaceable CAST TEETh 1 SiZE NumBEr OF TEETh item LiST WEighT 60" 6 wsw60 $ " 7 wsw66 $ " 8 wsw72 $ " 9 wsw78 $ " 10 wsw84 $ " 10 wsw90 $ " 11 wsw96 $ Includes weld-on shanks, flex pins, and replaceable cast teeth. Replacement Pin, Tooth, and Shank available on page 59. universal quick TACh plate Gusseted top bar and plug weld holes at high load areas. Two windows for visibility, while maintaining superior strength. Recommended for all loaders with universal quick attach. model WEighT LiST QTP 67 $185 virnigmfg.com attachments@virnigmfg.com

69 V50 SNOW BLOWEr The paddle-style Auger chews through any type of snow, and the direct drive Parker motor throws it up to 30 feet.

70 270 hydraulic chute rotation and deflector angle allows precise snow placement. Curved chute and shortened deflector maximize throwing distance. 3/16 metal surrounding the fan reduces distortion from rocks and debris, resulting in longer blower life. Paddle-style auger efficiently chews through any type of snow. SNOW Two, direct drive Parker motors with hydraulic pressure relief protection. Optimal auger location continuously feeds the partially enclosed fan to ensure max snow volume exits the chute. STANdArd FLOW LOAdErS: gpm VBwB $6,050 VBwB $6,200 VBwB $6,400 Includes couplers and 3/4 diameter eaton hoses. SNOW BLOWEr poly ShOE kit Two, 1ˮ x 6ˮ tall adjustable, reversible uhmw poly shoes. Includes all required hardware. For Virnig Snow Blowers only. model WEighT qty LiST BwPYSK 9 PAIR $145 Standard 5 8 x 6 reversible, replaceable bolt-on wear edge. Reversible, replaceable poly skid shoes prevent surface marks. Please specify MAKe and MODeL of skid loader when ordering Snow Blowers. One of the electric control options listed below is required. SNOW BLOWEr ELECTriC CONTrOL OpTiONS model descr. LOAdEr BrANd LiST elc7 1 7 PIN BOBCAT $730 elc8 8 PIN CAT $190 elc8trx 8 PIN TeReX/ASV, TAKeuChI $190 elc14 1 utilizes 12 volt accessory plug (cigarette lighter) in cab for power, includes magnetic box with switch for control. 14 PIN CASe, Nh, VOLVO, KuBOTA, jcb, GehL, MuSTANG, TAKeuChI 2 utilizes power source (battery) of loader for power, includes 12 volt accessory outlet, 12 volt accessory plug and magnetic box with switch for control. $210 elc14jd 14 PIN john DeeRe $210 elc14cat 14 PIN CAT $210 elc14cathf 14 PIN CAT high FLOw $230 1 Compatible with Bobcat 7 pin CanBus electric control system. May not work on Bobcat loaders from 2012 or older. -All the above connectors utilize in cab controls. model description LOAdEr BrANd LiST elcacc-sb 12 V ACCeSSORY PLuG 1 ALL, IF equipped $275 elcbat-sb POweR SOuRCe 2 ALL $325 V50 SNOW BLOWEr EdgE kit 5 8ˮ x 6" reversible double bevel steel edge. Includes all required hardware. For Virnig V50 Snow Blower only. model WidTh WEighT LiST VBwBeK $175 VBwBeK $205 VBwBeK $240 model VBWB60 VBWB72 VBWB84 Overall width/cut width (Inches) Overall Depth (Inches) 39.8 Cut height (Inches) 23.5 Max height, Varies w/ Deflector Position (Inches) 58.4 Fan Diameter (Inches) 20.0 Fan Depth (Inches) 7.2 Auger Diameter (Inches) 16.0 Throwing Distance up to 30 feet Recommended Flow Rate (GPM) Approximate weight (Pounds) Greater than 1500 pounds PRICeS effective 01/01/17. ALL INFO SuBjeCT TO ChANGe without NOTICe. virnigmfg.com attachments@virnigmfg.com

71 V60 SNOW BLOWEr The paddle-style Auger chews through any type of snow, and the direct drive eaton motor throws it up to 40 feet.

72 270 hydraulic chute rotation and deflector angle allows precise snow placement. Optimal auger location continuously feeds the partially enclosed fan to ensure max snow volume exits the chute. Curved chute and shortened deflector maximize throwing distance. 3/16 metal surrounding the fan reduces distortion from rocks and debris, resulting in longer blower life. Paddle-style auger efficiently chews through any type of snow. SNOW Two, direct drive eaton motors with hydraulic pressure relief protection. Standard 5 8 x 8 reversible, replaceable bolt-on wear edge. STANdArd FLOW LOAdErS: gpm VBw $7,175 VBw $7,380 VBw $7,590 STANdArd FLOW LOAdErS: gpm VBw $7,175 VBw $7,380 VBw $7,590 high FLOW LOAdErS: gpm VBw60-hF33 60 $8,985 VBw72-hF33 72 $9,195 VBw84-hF33 84 $9,400 high FLOW LOAdErS: gpm VBw60-hF42 60 $9,810 VBw72-hF42 72 $10,020 VBw84-hF42 84 $10,230 Blowers include couplers and 3/4 diameter eaton hoses. high flow Blowers include a case drain. SNOW BLOWEr poly ShOE kit See page 62 for more info. model WEighT qty LiST BwPYSK 9 PAIR $145 V60 SNOW BLOWEr EdgE kit 5 8ˮ x 8" reversible double bevel steel edge. Includes all required hardware. For Virnig V60 Snow Blower only. model WidTh WEighT LiST BweK $220 BweK $265 BweK $315 Reversible, replaceable poly skid shoes prevent surface marks. Please specify MAKe and MODeL of skid loader when ordering Snow Blowers. One of the electric control options listed below is required. SNOW BLOWEr ELECTriC CONTrOL OpTiONS model descr. LOAdEr BrANd LiST elc7 1 7 PIN BOBCAT $730 elc8 8 PIN CAT $190 elc8trx 8 PIN TeReX/ASV, TAKeuChI $190 elc14 1 utilizes 12 volt accessory plug (cigarette lighter) in cab for power, includes magnetic box with switch for control. 14 PIN CASe, Nh, VOLVO, KuBOTA, jcb, GehL, MuSTANG, TAKeuChI 2 utilizes power source (battery) of loader for power, includes 12 volt accessory outlet, 12 volt accessory plug and magnetic box with switch for control. $210 elc14jd 14 PIN john DeeRe $210 elc14cat 14 PIN CAT $210 elc14cathf 14 PIN CAT high FLOw $230 1 Compatible with Bobcat 7 pin CanBus electric control system. May not work on Bobcat loaders from 2012 or older. -All the above connectors utilize in cab controls. model description LOAdEr BrANd LiST elcacc-sb 12 V ACCeSSORY PLuG 1 ALL, IF equipped $275 elcbat-sb POweR SOuRCe 2 ALL $325 model VBW60 VBW72 VBW84 Overall width/cut width (Inches) Overall Depth (Inches) 47.9 Cut height (Inches) 28.0 Max height, Varies w/ Deflector Position (Inches) 65.0 Fan Diameter (Inches) 24.0 Fan Depth (Inches) 8.0 Auger Diameter (Inches) 18.0 Throwing Distance Recommended Flow Rate (GPM) up to 40 feet Standard Flow, high Flow Approximate weight (Pounds) 1140* 1220* 1300* *high Flow motor options add approximately 75 pounds to model weight. Greater than 1500 pounds PRICeS effective 01/01/17. ALL INFO SuBjeCT TO ChANGe without NOTICe. virnigmfg.com attachments@virnigmfg.com

73 V50 ANgLE SNOW BLAdE One-cylinder hydraulic design allows the blade to angle +/- 30. Trip edge containing two compression springs and three hinge points. Side-to-side oscillation allows the cutting edge to follow the contour of the surface. SNOW 2 bore, stroke cylinder featuring a corrosion, dent and flake resistant NitroSteel cylinder rod. Greasable 1 ¼ cylinder pins and diameter pivot pin. Design allows 5 1 2ˮ of total wear on the standard 5 8ˮx 8ˮ reversible, replaceable bolt-on wear edge. poly EdgE installed 1 rubber EdgE installed 1 SBS60-LD SBS72-LD $2,960 $3,055 SBS84-LD SBS96-LD $3,145 $3,245 Price includes steel cutting edge, cylinders, fittings, eaton hoses, and couplers. item LiST PYuS60 PYuS72 $0 $0 PYuS84 PYuS96 $0 $0 item LiST RuS60 $270 RuS72 $270 RuS84 $270 RuS96 $285 1 Poly replaces steel edge, no additional charge. Rubber is a list price addition. OpTiON: poly EdgE replaces standard steel cutting edge. No additional charge. 1 x reversible, replaceable, reprocessed uhmw polyethylene allows 5 ¼ of total wear. For Virnig V50 and V60 Angle Snow Blades only. Replacement edge kit available on page 77. OpTiON: rubber EdgE List price addition for Rubber edge. Replaces standard Steel edge. 1 ½ x 10 reversible, replaceable rubber edge allows 7 of total wear. For Virnig V50 and V60 Angle Snow Blades only. Replacement edge kit available on page 77. Replacement edge kits on page 77. Replacement washer, pin and shoe on page 77. model SBS60-Ld SBS72-Ld SBS84-Ld SBS96-Ld Overall Blade width (Inches) Blade height (Inches) 31.0 Blade Angle (Degrees) +/- 30 width at Full Angle (Inches) Moldboard Thickness (Inches) 0.19 Cutting edge (Inches) 5/8 x 8 Bolt-on Blade Oscillation (Degrees) +/- 4 Approximate weight (Pounds)* Less than 1800 pounds *weight with Steel edge installed. 65 virnigmfg.com attachments@virnigmfg.com PRICeS effective 01/01/17. ALL INFO SuBjeCT TO ChANGe without NOTICe.

74 V60 ANgLE SNOW BLAdE Two-cylinder hydraulic design allows the blade to angle +/- 30. hydraulic crossover relief valve helps protect the attachment by absorbing shock by angling the entire blade if a curb or other object is struck. Trip edge containing four compression springs and hinge points. Side-to-side oscillation allows the cutting edge to follow the contour of the surface. 2 bore, stroke cylinders featuring corrosion, dent and flake resistant NitroSteel cylinder rods. Greasable 1 ¼ cylinder pins and diameter pivot pin. Design allows 5 1 2ˮ of total wear on the standard 5 8ˮx 8ˮ reversible, replaceable bolt-on wear edge. SNOW SBS72 SBS $3,730 $3,830 SBS96 SBS $3,930 $4,030 SBS $4,150 Price includes steel cutting edge, cylinders, fittings, eaton hoses, and couplers. poly EdgE installed 1 item LiST PYuS72 $0 PYuS84 $0 PYuS96 $0 PYuS108 $0 PYuS120 $0 rubber EdgE installed 1 item RuS72 LiST $270 RuS84 RuS96 $270 $285 RuS108 RuS120 $285 $310 1 Poly replaces steel edge, no additional charge. Rubber is a list price addition. OpTiON: poly EdgE replaces standard steel cutting edge. No additional charge. 1 x reversible, replaceable, reprocessed uhmw polyethylene allows 5 ¼ of total wear. For Virnig V50 and V60 Angle Snow Blades only. Replacement edge kit available on page 77. OpTiON: pin-on WiNgS For new V60 Angle Snow Blades with factory mounting holes. Two, 12 wide wings angled 20 forward from the moldboard to increase the blade s width by 21 ¾. Brackets bolt to the snow blade moldboard and two pins mount each wing to the bracket. Replacement wing edge kit available on page 77. WEighT wgs 12 $ OpTiON: rubber EdgE List price addition for Rubber edge. Replaces standard Steel edge. 1 ½ x 10 reversible, replaceable rubber edge allows 7 of total wear. For Virnig V50 and V60 Angle Snow Blades only. Replacement edge kit available on page 77. OpTiON: retro pin-on WiNgS For V60 Angle Blades without factory mounting holes with a serial # below Two, 12 wide wings angled 20 forward from the moldboard to increase the blade s width by 21 ¾. Install by drilling holes in the moldboard or by directly welding brackets to the moldboard. Replacement wing edge kit available on page 77. WEighT wgs-r 12 $ Replacement edge kits on page 77. Replacement washer, pin and shoe on page 77. model SBS72 SBS84 SBS96 SBS108 SBS120 Overall Blade width (Inches) Blade height (Inches) 31.0 Blade Angle (Degrees) +/- 30 width at Full Angle (Inches) Moldboard Thickness (Inches) 0.19 Cutting edge (Inches) 5/8 x 8 Bolt-on Blade Oscillation (Degrees) +/- 4 Approximate weight (Pounds)* Greater than 1500 pounds *weight with Steel edge installed. virnigmfg.com attachments@virnigmfg.com

75 V60 V-SNOW BLAdE The scoop position allows the operator to push and pile snow, and the V position cuts through the deepest piles and drifts.

76 hydraulic only control makes variable V, scoop, straight, and angled positions. Two-cylinder hydraulic angle with " diameter pivot pin and 1 ¼ cylinder pins. 2 bore, stroke cylinders featuring corrosion, dent and flake resistant NitroSteel cylinder rods. hydraulic sequence relief valves help protect the attachment by transferring shock from one wing to the other if a curb or other object is struck. SNOW Reversible, replaceable bolt-on edges allow 5 1 2ˮ of total wear. Replaceable steel center edge sections. SBV48 48 $4,505 SBV60 SBV $4,595 $4,620 SBV84 84 $4,720 SBV96 SBv $4,820 $4,915 SBv $5,075 Price includes steel cutting edge, two pairs of steel center sections, cylinders, fittings, couplers, and eaton hoses. Oscillation and adjustable cast skid shoes allows edge to follow uneven surfaces. Floating frame link maintains full blade contact in scoop and V positions, while allowing full down pressure in straight and angled positions. Trip edge containing four compression springs. OpTiON: pin-on WiNgS For new V60 V-Snow Blades with factory mounting holes. Two, 12 wide wings angled 20 forward from the moldboard to increase the blade s width by 21 ¾. Brackets bolt to the snow blade moldboard and two pins mount each wing to the bracket. Replacement wing edge kit available on page 77. WEighT wgs 12 $ OpTiON: retro pin-on WiNgS For V60 V-Snow Blades without factory mounting holes with a serial # below Two, 12 wide wings angled 20 forward from the moldboard to increase the blade s width by 21 ¾. Install by drilling holes in the moldboard or by directly welding brackets to the moldboard. Replacement wing edge kit available on page 77. WEighT wgs-r 12 $ replacement parts Replacement edge kits on page 77. Replacement washer, pin and shoe on page 77. model SBV48* SBV60 SBV72 SBV84 SBV96 SBV108 SBV120 Overall Blade width (Inches) Blade height (Inches) 31.0 Blade Angle (Degrees) +/- 30 width at Full Angle (Inches) width at Full Scoop (Inches) width at Full V (Inches) Moldboard Thickness (Inches) 0.19 Cutting edge (Inches) 5/8 x 8 Bolt-on Center edge (Inches) 1/2 high Tensile Steel, Bolt-on Blade Oscillation (Degrees) +/- 4 Float Link Angle (Degrees) +/- 5 Approximate weight (Pounds)** Greater than 1500 pounds *SBV48 has two compression springs and four hinge points. **weight with Steel edge installed. PRICeS effective 01/01/17. ALL INFO SuBjeCT TO ChANGe without NOTICe. virnigmfg.com attachments@virnigmfg.com

77 V60 hydraulic SNOW BLAdE/puShEr Variable pusher, straight, and angled positions allow optimal snow removal.

78 electric over hydraulic control allows independent angling of each wing. entire blade angles separately from the wings for infinite blade and wing angle configurations. Design allows 5 1 2ˮ of total wear on all bolt-on edges. SNOW Replaceable steel edge sections at pivot points to limit spillage. Double crossover relief valves help protect the attachment by angling the entire blade when curbs or objects are hit. Three blade sections with individual bottom trip edges utilizing eight total compression springs. Side-to-side oscillation and adjustable cast skid shoes allows edge to follow uneven surfaces. Floating frame link maintains full blade contact when wings are angled, while also allowing down pressure when the wings are straight. Basic Blade Configurations Blade and wings can be positioned at any point between. hsbp $7,495 hsbp $7,695 hsbp $7,895 hsbp $8,095 Price includes steel cutting edges, two pairs of steel pivot sections, cylinders, fittings, couplers, and eaton hoses. One of the electric control options listed below is required. hsbp ELECTriC CONTrOL OpTiONS model descr. LOAdEr BrANd LiST elc7 1 7 PIN BOBCAT $730 elc8 8 PIN CAT $190 elc8trx 8 PIN TeReX/ASV, TAKeuChI $190 elc14 14 PIN CASe, Nh, VOLVO, KuBOTA, jcb, GehL, MuSTANG, TAKeuChI $210 elc14jd 14 PIN john DeeRe $210 elc14cat 14 PIN CAT $210 elc14cathf 14 PIN CAT high FLOw $230 1 Compatible with Bobcat 7 pin CanBus electric control system. May not work on Bobcat loaders from 2012 or older. -All the above connectors utilize in cab controls. model description LOAdEr BrANd LiST elcacc 12 V ACCeSSORY PLuG 1 ALL, IF equipped $245 elcbat POweR SOuRCe 2 ALL $300 1 utilizes 12 volt accessory plug (cigarette lighter) in cab for power, includes magnetic box with switch for control. 2 utilizes power source (battery) of loader for power, includes 12 volt accessory outlet, 12 volt accessory plug and magnetic box with switch for control. replacement parts Replacement edge kits on page 77. Replacement washer, pin and shoe on page 77. model hsbp120 hsbp132 hsbp144 hsbp156 Overall Blade width (Inches) Moldboard width (Inches) Blade height (Inches) 31.0 Blade Angle (Degrees) +/- 30 wing Angle (Degrees) +/- 60 width at Full Angle Both wings Open (Inches) width at Full Angle One wing Open (Inches) width at Full Scoop (Inches) Moldboard Thickness (Inches) 0.19 Cutting edge (Inches) 5/8 x 8 Bolt-on wing Cutting edge (Inches) 1/2 x 7 3/4 high Tensile Steel, Bolt-on Blade Oscillation (Degrees) +/- 4 Float Link Angle (Degrees) +/- 5 Approximate weight (Pounds) Greater than 1800 pounds PRICeS effective 01/01/17. ALL INFO SuBjeCT TO ChANGe without NOTICe. virnigmfg.com attachments@virnigmfg.com

79 V50 LOW profile SNOW pusher Over a foot shorter than the V60 Snow Pusher for better visibility. SNOW edge never needs adjusting; it only needs to be reversed or replaced. unique floating side plates and side-to-side oscillation keeps rubber edge in constant contact with the surface eliminating slippery, icy residue. 1½ˮx10ˮ reversible, replaceable rubber edge with 6ˮ of total wear. Bracing on pusher sides and ½ˮ thick x 3ˮ wide skid shoes ensure attachment longevity. LSwP84 84 $2,430 LSwP96 96 $2,555 LSwP $2,670 LSwP $2,760 SNOW pusher rubber EdgE kit 1 ½" x 10" reversible rubber edge. Includes all required hardware. For Virnig Snow Pusher and Low Profile Snow Pusher only. NOTE: Snow Pusher and Pull Back of the same width use the same rubber part, but different mount hardware. model WidTh WEighT LiST SwP84RK $575 SwP96RK $640 SwP108RK $705 SwP120RK $780 pull BACk rubber EdgE kit 1 ½" x 10" reversible rubber edge. Includes all required hardware. For Virnig Pull Back only. NOTE: Snow Pusher and Pull Back of the same width use the same rubber part, but different mount hardware. model WidTh WEighT LiST SPP84RK $575 SPP96RK $640 SPP108RK $705 SPP120RK $780 model LSWp84 LSWp96 LSWp108 LSWp120 Overall Pusher width (Inches) Pusher Depth (Inches) 39.5 Pusher height (Inches) 27.5 Inside Pusher width (Inches) Inside Pusher Depth (Inches) 30.0 Pusher Oscillation (Degrees) +/- 4 Cutting edge (Inches) 1 1/2 x 10 Rubber Approximate weight (Pounds) OpTiON: pull BACk Designed to allow down pressure on rubber edge. BACK VIew with OPTIONAL PuLL BACK INSTALLeD Greater than 1500 pounds SPP84 84 $830 SPP96 96 $900 SPP $975 SPP $1,055 1 ½ x 10 reversible, replaceable rubber edge allows 6 of total wear. e asy installation on any Virnig Rubber edge Snow Pusher. Includes all required hardware. model Spp84 Spp96 Spp108 Spp120 Overall Pull Back width (Inches) Inside Pull Back width (Inches) Cutting edge (Inches) 1 1/2 x 10 Rubber Approximate weight (Pounds) virnigmfg.com attachments@virnigmfg.com PRICeS effective 01/01/17. ALL INFO SuBjeCT TO ChANGe without NOTICe.

80 V60 SNOW pusher edge never needs adjusting; it only needs to be reversed or replaced. unique floating side plates, floating frame link and side-to-side oscillation keeps rubber edge in constant contact with the surface eliminating slippery, icy residue. SNOW Bracing on pusher sides and ½ˮ thick x 3ˮ wide skid shoes ensure attachment longevity. 1½ˮx10ˮ reversible, replaceable rubber edge with 6ˮ of total wear. SwP84 84 $3,350 SwP96 96 $3,470 SwP $3,595 SwP $3,715 SNOW pusher rubber EdgE kit 1 ½" x 10" reversible rubber edge. Includes all required hardware. For Virnig Snow Pusher and Low Profile Snow Pusher only. NOTE: Snow Pusher and Pull Back of the same width use the same rubber part, but different mount hardware. model WidTh WEighT LiST SwP84RK $575 SwP96RK $640 SwP108RK $705 SwP120RK $780 pull BACk rubber EdgE kit 1 ½" x 10" reversible rubber edge. Includes all required hardware. For Virnig Pull Back only. NOTE: Snow Pusher and Pull Back of the same width use the same rubber part, but different mount hardware. model WidTh WEighT LiST SPP84RK $575 SPP96RK $640 SPP108RK $705 SPP120RK $780 model SWp84 SWp96 SWp108 SWp120 Overall Pusher width (Inches) Pusher Depth (Inches) 51.2 Pusher height (Inches) 40.8 Inside Pusher width (Inches) Inside Pusher Depth (Inches) 38.3 Pusher Oscillation (Degrees) +/- 4 Frame Link Float (Inches) 3.0 Cutting edge (Inches) 1 1/2 x 10 Rubber Approximate weight (Pounds) OpTiON: pull BACk Greater than 1800 pounds Designed to allow down pressure on rubber edge. SPP84 84 $830 SPP96 96 $900 SPP $975 SPP $1,055 1 ½ x 10 reversible, replaceable rubber edge allows 6 of total wear. e asy installation on any Virnig Rubber edge Snow Pusher. Includes all required hardware. model Spp84 Spp96 Spp108 Spp120 Overall Pull Back width (Inches) Inside Pull Back width (Inches) Cutting edge (Inches) 1 1/2 x 10 Rubber Approximate weight (Pounds) virnigmfg.com attachments@virnigmfg.com

81 V60 STEEL EdgE SNOW pusher Snow blade and snow pusher hybrid ideal for scraping hard-pack snow.

82 effectively scrapes hard-pack and icy snow. edge never needs adjusting; it only needs to be reversed or replaced. 5 1/2ˮ of total wear. unique floating side plates and side-to-side oscillation collect more snow by keeping the steel edge in constant contact with uneven pavement. SNOW Bracing on pusher sides and ½ˮ thick x 3ˮ wide skid shoes ensure attachment longevity. STEEL EdgE SNOW pusher EdgE kit 5 8ˮ x 8ˮ reversible double bevel steel edge. Includes all required hardware. For Virnig Steel edge Pushers only. NOTE: Snow Pusher and Pull Back of the same width use the same steel part(s), but different mount hardware. model WidTh WEighT LiST SeSPeK $315 SeSPeK $350 SeSPeK $410 SeSPeK $460 Trip edge contains four compression springs with a rigid moldboard to help minimize plowing interruptions. SeSP84 84 $2,800 SeSP96 96 $2,950 SeSP $3,090 SeSP $3,200 model SESp84 SESp96 SESp108 SESp120 Overall Pusher width (Inches) Pusher Depth (Inches) 54.4 Pusher height (Inches) 31.7 Inside Pusher width (Inches) Inside Pusher Depth (Inches) 32.2 Pusher Oscillation (Degrees) +/- 4 Moldboard Thickness (Inches) 0.19 Cutting edge (Inches) 5/8 x 8 Steel Approximate weight (Pounds) Greater than 1500 pounds OpTiON: STEEL EdgE pull BACk pull BACk STEEL EdgE kit 5 8ˮ x 8ˮ reversible double bevel steel edge. Includes all required hardware. For Virnig Steel edge Pull Back only. NOTE: Snow Pusher and Pull Back of the same width use the same steel part(s), but different mount hardware. model WidTh WEighT LiST SePeK $315 SePeK $350 SePeK $410 SePeK $460 Designed to allow down pressure on steel edge. 5/8" x 8" reversible, replaceable steel edge allows 5 1/2ˮ of total wear. e asy installation on any Virnig Steel edge Snow Pusher. Includes all required hardware. model SEp84 SEp96 SEp108 SEp120 Overall Pull Back width (Inches) Inside Pull Back width (Inches) Cutting edge (Inches) SeP84 84 $575 SeP96 96 $630 SeP $695 SeP $750 5/8 x 8 Steel Approximate weight (Pounds) PRICeS effective 01/01/17. ALL INFO SuBjeCT TO ChANGe without NOTICe. virnigmfg.com attachments@virnigmfg.com

83 V30 COmpACT TrACTOr SkELETON rock BuCkET ~3 tine spacing to pick rocks and leave dirt behind. COmpACT TrACTOr SRV48-CT 48 $945 SRV54-CT 54 $970 SRV60-CT 60 $1,000 SRV66-CT 66 $1,040 SRV72-CT 72 $1,080 e very tine is constructed of one piece of 3 8 Grade 50 steel, from tip to top cross member, to add rigidity. Raised ridge in center of tines (rock dam) and notch near tips secure rocks while digging. Fully gusseted tine tips for added strength. universal skid steer mount only. model SrV48-CT SrV54-CT SrV60-CT SrV66-CT SrV72-CT Overall Bucket width (Inches) Bucket Depth (Inches) 32.3 Bucket height (Inches) 18.4 Number of Tines (with Sides) Space Between Tines (Inches) 2.9 Tine Thickness (Inches) 0.375* Approximate weight (Pounds) Less than 1500 pounds *Tine Material is Grade 50 Plate (50,000 PSI Minimum Yield Strength). V30 COmpACT TrACTOr SkELETON rock grapple One-cylinder independent grapple with ~3 tine spacing designed to pick rocks and leave dirt behind. e very tine is constructed of one piece of 3 8 Grade 50 steel, from tip to top cross member, to add rigidity Raised ridge in center of tines (rock dam) and notch near tips secure rocks while digging. Fully gusseted tine tips for added strength. 1 ½" bore, 8" stroke cylinder featuring a corrosion, dent and flake resistant NitroSteel cylinder rod. Greasable 1 diameter cylinder and hinge pins. universal skid steer mount only. SRGV48-CT 48 $1,890 SRGV54-CT 54 $1,915 SRGV60-CT 60 $1,940 SRGV66-CT 66 $1,965 SRGV72-CT 72 $2,005 Price includes a cylinder, fittings, and eaton hoses. Couplers NOT included. model descr. LiST 9332PP COuPLeRS * $ * Pair of 90, 1/2 male and female couplers. model SrgV48-CT SrgV54-CT SrgV60-CT SrgV66-CT SrgV72-CT Overall Bucket width (Inches) Bucket Depth (Inches) 32.3 Bucket height (Inches) 18.4 Number of Tines (with Sides) Space Between Tines (Inches) 2.9 Tine Thickness (Inches) 0.375* Grapple jaw Opening (Inches) 32.1 Approximate weight (Pounds) Less than 1500 pounds *Tine Material is Grade 50 Plate (50,000 PSI Minimum Yield Strength). 75 virnigmfg.com attachments@virnigmfg.com PRICeS effective 01/01/17. ALL INFO SuBjeCT TO ChANGe without NOTICe.

84 V30 COmpACT TrACTOr utility FOrk Tines easily penetrate piles and low profile allows excellent visibility. Removable, replaceable 1 ½ diameter tines. uv48-ct 48 $915 uv54-ct 54 $930 uv60-ct 60 $965 uv66-ct 66 $1,030 uv72-ct 72 $1,085 universal skid steer mount only. model uv48-ct uv54-ct uv60-ct uv66-ct uv72-ct Overall Bucket width (Inches) Bucket Depth (Inches) 27.3 Bucket height (Inches) 21.4 Number of Tines Space Between Tines (Inches) Tine Diameter (Inches) 1.5* Approximate weight (Pounds) Less than 1500 pounds *Tine Material is 1045 CFSR Round (100,000 PSI Minimum Yield Strength). COmpACT TrACTOr V30 COmpACT TrACTOr utility FOrk grapple One-cylinder grapple designed to handle a variety of materials including manure, brush, and debris. Low profile allows excellent visibility. Removable, replaceable 1 ½ diameter tines No cross member at tine tips allowing better material penetration. 1 ½ bore, 8 stroke cylinder featuring a corrosion, dent and flake resistant NitroSteel cylinder rod. Greasable 1 diameter cylinder and hinge pins. universal skid steer mount only. ugv48-ct 48 $1,845 ugv54-ct 54 $1,905 ugv60-ct 60 $1,950 ugv66-ct 66 $2,010 ugv72-ct 72 $2,075 Price includes a cylinder, fittings, and eaton hoses. Couplers NOT included. model descr. LiST 9332PP COuPLeRS * $ * Pair of 90, 1/2 male and female couplers. model ugv48-ct ugv54-ct ugv60-ct ugv66-ct ugv72-ct Overall Bucket width (Inches) Bucket Depth (Inches) 27.3 Bucket height (Inches) 21.4 Number of Tines Space Between Tines (Inches) Tine Diameter (Inches) 1.5* Grapple jaw Opening (Inches) 37.5 Approximate weight (Pounds) Less than 1500 pounds virnigmfg.com attachments@virnigmfg.com