UNIC TRUCK MOUNTED CRANE

Size: px
Start display at page:

Download "UNIC TRUCK MOUNTED CRANE"

Transcription

1 UNIC TRUCK MOUNTED CRANE presents URW0 URW0 URW0 URW0 URW0 URW00 URW0 URU00

2

3

4

5 CONTENTS UNIC is... NEW Products UNIC Truck Mounted Crane UNIC Truck Crane Line Up URW 0 Series URW 0 Series URW 0 Series URW 0 Series URW 0 Series URW 00 Series URW 0 Series URU 00 Series

6 UNIC IS... VERSATILE Operational advantages Buildings, walls, whatever, with UNIC wire-rope cranes you get precise high-lift placement and safe, sure operation. Their dependability is all in their strength and design, original UNIC features. Higher performance, too, at lower depths. UNIC wire-rope cranes handle heavy loads in deephole jobs with accuracy and stability. A wide range of models assures versatile matching to job requirements. Tight places are the right places for UNIC wire-rope cranes. In any operating situation their strong steel cables mean extra dependability and safety. High, low or tight, UNIC wire-rope cranes are always right. STRONG Heavy Lifts with a winch rope crane The working radius can increase when the load is lifted with a knuckle boom crane. An TM UNIC easily lifts a tonne cable drum. This is not possible with even a TM knuckle boom crane. The Lift Curve Graph of a typical TM knuckle boom crane shows it cannot lift a tonne load onto the tray. When a load is raised by a winch rope crane, the working radius does not increase.

7 SMART Digital Load Meter... The digital load meter provides clear critical load weight information to the operator at all times. SIMPLE Control lever layout Synchronised control levers are laid out for operational ease. One hand can boom telescope and simultaneously hook down or reverse. UNIC control levers also have reflective direction symbols for safer operation in low light situations. PROBLEM SOLVING Automatic Hook Stow System Hook storage on a knuckle boom crane fitted with a winch is always a problem. Not with a UNIC. Flick one switch - job done!

8 UNIC IS... EFFICIENT Automative Throttle Advance This is an inbuilt feature of UNIC cranes. Incorporated into the control levers, increase truck engine revs proportionally with lever movement. This provides optimums in control of load handling, speed of hook travel, fuel economy and noise control. NB Requires to interface with the chassis manufacturers suitable throttle pod system. SAFE Anti-two block system UNIC s anti two-block system means that there is no fear of the hook striking the boom tip. The overwind alarm and auto stop is a standard in all UNIC truck cranes. Without this feature the dangerous practice of overwinding can easily occur. VISIBLE Three Light Tower Optional on all new UNIC cranes. This safety feature is clear, bright and visible to everyone on site.

9 NEW PRODUCTS SUPER ML RADIO REMOTE TRANSMITTER AS YOU WORK Read Exactly what you can lift in kg Exactly what you are lifting in kg Critical information such as boom length, angle and radius Australia s NEW Super ML Radio Remote Transmitter gives the operator remote access to load weight and crane capacity information. Additional features include a warning lamp and load factor bar. Observe The load factor bar Signal strength Control Crane operating speed All crane functions Warning horn and much more SUPER STABILITY SYSTEM Need to work next to heavy traffic? Need to work overfront of truck? Need to work in confined areas? Just want to load or unload a light item quickly? Need to do all of that with the best safety and control? UNIC s Super Stability System automatically THEN CHOOSE UNIC Detects outrigger extension from nil to half to full extension. Detects outrigger ground contact Works three separate zones - left, right and overfront Automatically adjusts the Moment Limiter to match the stabiliser setting Automatically changes Moment Limiter as the boom slews from zone to zone.

10 UNIC TRUCK M The UNIC truck mounted crane incorporates superior lifting performance, a wide working range, ease of operation and second-tonone safety features to provide multipurpose hydraulic cranes that are engineered to handle a great variety of loading operations. perations. In addition to normal lifting operations, s, UNIC truck mounted cranes excel in work involving ving the lowering of cargo below ground level vel via the use of a winch. It offers excellent operational perational control and accurate load placement. ent. UNIC Truck mounted cranes provide e an endless variety of applications and supportt for many industries including: Transportation, Construction, Landscaping, caping, Lumber, Railroad Work, Iron & Steel Production, Recycling & Salvage, Steel Erection,, Poles & Signwork, Marine, Irrigation, and Drilling. lling. HIGH LEVEL PERFORMANCE With its hoist-winch and long straight telescopic boom, the UNIC provides exceptionally high level lifting performance.

11 OUNTED CRANE MAXIMUM CONTROL & PRECISION Controlling the speed from high to low means maximum control in even the most challenging situations. OPERATION RANGE A wide working range means that UNIC can handle cargo in high places, below ground or placed at a distance from the truck.

12 UNIC URW0 TRUCK series Lifting capacity,0 kg Max hook height. m Number of booms Recommended min. chassis GVM,00 kg URW0 series Lifting capacity,0 kg Max hook height. m Number of booms Recommended min. chassis GVM,00 kg URW0 series Lifting capacity,00 kg Max hook height. m Number of booms Recommended min. chassis GVM 0,00 kg URW0 series Lifting capacity,00 kg Max hook height. m Number of booms Recommended min. chassis GVM,000 kg

13 CRANE LINE UP URW0 series Lifting capacity,00 kg Max hook height. m Number of booms Recommended min. chassis GVM,000 kg URW00 series Lifting capacity,00 kg Max hook height. m Number of booms Recommended min. chassis GVM,000 kg URW0 series Lifting capacity,00 kg Max hook height. m Number of booms Recommended min. chassis GVM,000 kg URU00 series Lifting capacity,00 kg Max hook height. m Number of booms Recommended min. chassis GVM,000 kg

14 URW0 series,0 kg LIFTING CAPACITY. APPROX. m MAX. HOOK HEIGHT ABOVE GROUND RADIO REMOTE CONTROL SPECIFICATIONS URW CRANE MODEL Max lifting capacity Min 0.m, Max.m Min 0.m, Max.m Min 0., Max.m Above ground.m.m.m Below ground.m with -part line.m with -part line.m with -part line Min.m, Max.m Min.m, Max.m Min.m, Max.m -section box beam type telescoping boom -section box beam type telescoping boom -section box beam type telescoping boom Boom length Boom sections Boom raise angle to Slewing angle 0 continuous Single line pull Winch URW Max 0kg at.m Working radius Max hook height (approx.) URW Wire rope.kn {kgf} Construction: IWRC x WS() GRADE B / Diameter x Length: mm x m / Breaking strength:.kn {0kgf} Vertical jacks, double acting hydraulic cylinders with pilot-operated check valves / Horizontal beams, manual extension type Outriggers Retracted:.m, Extended:.m, Mid-extended:.m Hydraulic pump Rated pressure Hydraulic oil tank capacity Safety devices 0.MPa {0kgf/cm) L Pressure relief valve for hydraulic circuit / Counterbalance valves for boom raising and boom telescoping cylinders / Pilot-operated check valves for vertical outrigger cylinders / Boom angle indicator with load indicator / Hook safety latch / Automatic mechanical brake for winch / Digital load meter / Automatic stop for overwinding / Overwinding alarm / Alarm buzzer / Level / Emergency stop button / Overloading alarm / Turnover protection

15 (.) Sections Boom Maximum ~ (0.) (.) (.m) (.m) Sections Boom 0 Maximum m. 0 0 (0.0) W ~.. (.) 0 (.) W 0.m m (.) Sections Boom Maximum 0 0 (0.) W.m. (.) 0. ~ CRANE MOUNTING DIMENSIONS CRANE MODEL,,0 UR-W,0 Min.,0 ~ Mid.,00 ~,00 ~ Max.,00 UR-W, Min.,0 ~ Mid.,0 ~ Max.,00,, UR-W, Min.,00 ~ Max.,00,, STROKE 0 ROTATION CENTER, MAX,,00 MID,00 MIN, TRUCK FRAME STROKE 0 STROKE Drawing: UR-W (Unit: mm) 0

16 URW0 series,0 kg. APPROX. m MAX. HOOK HEIGHT ABOVE GROUND LIFTING CAPACITY RADIO REMOTE CONTROL SPECIFICATIONS CRANE MODEL URW URW URW URW Max lifting capacity 0kg at.m 0kg at.m 0kg at.m 0kg at.m Max working radius.m.m 0.m.m Above ground.m.m m Max.m Below ground.m with -part line.m with -part line.m with -part line.m with -part line Min.m, Max.m Min.m, Max.m Min.m, Max 0.m Min.m, Max.m Max hook height (approx.) Boom length -section box beam -section box beam -section box beam -section box beam type telescoping boom type telescoping boom type telescoping boom type telescoping boom Boom sections Boom raise angle to Slewing angle 0 continuous Single line pull Winch Wire rope.kn {0kgf} Construction: IWRC x WS() GRADE B / Diameter x Length: mm x m / Breaking strength:.kn {0kgf} Construction: IWRC x WS() GRADE B / Diameter x Length: mm x m / Breaking strength:.kn {0kgf} Construction: IWRC x WS() GRADE B / Diameter x Length: mm x m / Breaking strength:.kn {0kgf} Construction: IWRC x WS() GRADE B / Diameter x Length: mm x.m / Breaking strength:.kn {0kgf} Vertical jacks, double acting hydraulic cylinders with pilot-operated check valves / Horizontal beams, manual extension type Outriggers Retracted:.m, Extended:.0m, Mid-extended:.m Hydraulic pump Rated pressure Hydraulic oil tank capacity Safety devices Retracted:.m Extended:.m Mid-extended:.m,.m 0.MPa {0kgf/cm) L Pressure relief valve for hydraulic circuit / Counterbalance valves for boom raising and boom telescoping cylinders / Pilot-operated check valves for vertical outrigger cylinders / Boom angle indicator with load indicator / Hook safety latch / Automatic mechanical brake for winch / Digital load meter / Automatic stop for overwinding / Overwinding alarm / Alarm buzzer / Level / Emergency stop button / Overloading alarm / Turnover protection

17 W Sections Boom Maximum 0 0.m (.0m) (.0m) (.m) (.m) (0.m) Sections Boom Maximum 0 W 0.m (.m) (.m) (.m) (.m) Sections Boom Maximum 0 W.m (.0m) (.m) (.m) Sections Boom Maximum 0 W.m (.m) (.m) CRANE MOUNTING DIMENSIONS CRANE MODEL,,0 UR-W, Min.,0 ~ Mid.,0 ~,00 ~,000 ~ 0,00 ~ Max.,00 UR-W, Min.,0 ~ Mid.,00 ~,000 ~,00 ~ Max. 0,00,,0 UR-W,0 Min.,0 ~ Mid.,00 ~,00 ~ Max.,00,, UR-W, Min.,0 ~ Mid.,0 ~ Max.,00,, Drawing: UR-W (Unit: mm)

18 URW0 series. APPROX. m MAX. HOOK HEIGHT ABOVE GROUND,00 kg LIFTING CAPACITY RADIO REMOTE CONTROL SPECIFICATIONS CRANE MODEL URW URW URW URW Max lifting capacity 00kg at.m 00kg at.m 00kg at.m 00kg at.m Max working radius.m.m 0.m.m Above ground.m 0.m.0m.m Below ground.m with -part line 0.m with -part line.m with -part line.m with -part line Min.m, Max.m Min.m, Max.m Min.m, Max 0.m Min.m, Max.m Max hook height (approx.) Boom length -section box beam -section box beam -section box beam -section box beam type telescoping boom type telescoping boom type telescoping boom type telescoping boom Boom sections Boom raise angle to Slewing angle 0 continuous Single line pull Winch Wire rope.kn {0kgf} Construction: IWRC x WS() GRADE B / Diameter x Length: mm x m / Breaking strength:.kn {0kgf} Construction: IWRC x WS() GRADE B / Diameter x Length: mm x m / Breaking strength:.kn {0kgf} Construction: IWRC x WS() GRADE B / Diameter x Length: mm x m / Breaking strength:.kn {0kgf} Construction: IWRC x WS() GRADE B / Diameter x Length: mm x.m / Breaking strength:.kn {0kgf} Vertical jacks, double acting hydraulic cylinders with pilot-operated check valves / Horizontal beams, manual extension type Outriggers Retracted:.m, Extended:.m, Mid-extended:.m,.m Hydraulic pump Rated pressure Hydraulic oil tank capacity Safety devices 0.MPa {0kgf/cm) L Pressure relief valve for hydraulic circuit / Counterbalance valves for boom raising and boom telescoping cylinders / Pilot-operated check valves for vertical outrigger cylinders / Boom angle indicator with load indicator / Hook safety latch / Automatic mechanical brake for winch / Digital load meter / Automatic stop for overwinding / Overwinding alarm / Alarm buzzer / Level / Emergency stop button / Overloading alarm / Turnover protection

19 0 W Sections Boom 0 0 (.) 0 Maximum (.0m) ~ (.0m) (.0m) (.m) W 0.m. Maximum ~ (.0m) (.m) (0.m) (.m) (.m) (.m) Sections Boom Sections Boom Maximum (.0m)....m. W 0 0. ~..0 0 (.) (0.) (.) 0 0 (0.) (0.) (0.) (.) (0.) (.0) 0.m (.m) (.m) Sections Boom Maximum 0 W.m (.0m)... 0 (.) (0.) 0. ~ (.m) CRANE MOUNTING DIMENSIONS CRANE MODEL,,0 UR-W, Min.,0 ~ Mid.,0 ~,00 ~,000 ~ 0,00 ~ Max.,00 UR-W, Min.,0 ~ Mid.,00 ~,000 ~,00 ~ Max. 0,00,,0 UR-W, Min.,0 ~ Mid.,00 ~,000 ~ Max.,00,, UR-W, Min.,0 ~ Mid.,0 ~ Max.,00,, 0 STROKE 0 ROTATION CENTER MAX,00,,00,0 MID(),0 MID(),00 MIN TRUCK FRAME STROKE STROKE Drawing: UR-W (Unit: mm)

20 URW0 series. APPROX. m MAX. HOOK HEIGHT ABOVE GROUND,00 kg LIFTING CAPACITY RADIO REMOTE CONTROL SPECIFICATIONS CRANE MODEL URW URW URW Max lifting capacity 00kg at.m 00kg at.m 00kg at.m Max working radius.m.m.m Above ground.m.m.m Below ground.m with -part line.m with -part line.m with -part line Min.m, Max.m Min.m, Max.m Min.m, Max 0.0m -section box beam type telescoping boom -section box beam type telescoping boom -section box beam type telescoping boom Max hook height (approx.) Boom length Boom sections Boom raise angle to Slewing angle 0 continuous Single line pull Winch Wire rope.kn {0kgf} Construction: IWRC x WS() GRADE B / Diameter x Length: mm x 0m / Breaking strength:.kn {0kgf} Construction: IWRC x WS() GRADE B / Diameter x Length: mm x m / Breaking strength:.kn {0kgf} Construction: IWRC x WS() GRADE B / Diameter x Length: mm x.m / Breaking strength:.kn {0kgf} Vertical jacks, double acting hydraulic cylinders with pilot-operated check valves / Horizontal beams, manual extension type Outriggers Retracted:.0m, Extended.m, Mid-extended:.m Hydraulic pump Rated pressure Hydraulic oil tank capacity Safety devices 0.MPa {0kgf/cm} L Pressure relief valve for hydraulic circuit / Counterbalance valves for boom raising and boom telescoping cylinders / Pilot-operated check valves for vertical outrigger cylinders / Boom angle indicator with load indicator / Hook safety latch / Automatic mechanical brake for winch / Digital load meter / Automatic stop for overwinding / Overwinding alarm / Alarm buzzer / Level / Emergency stop button / Overloading alarm / Turnover protection

21 0 Sections Boom 0 0 (.) 0 Maximum m. W ~ (.m) (.m) (.) (0.) (.) 0 Sections Boom 0 0 Maximum ~ (.m) (.) (0.) (.) W.m. Sections Boom Maximum 0 W.m. 0 (.) (0.) 0. ~ CRANE MOUNTING DIMENSIONS CRANE MODEL,0,0 UR-W, Min.,0 ~ Mid.,0 ~, ~ Max. 0,000 UR-W, Min.,0 ~ Mid.,0 ~ Max.,00,0,0 UR-W, Min.,0 ~ Max.,0,0,0 00 STROKE 0 ROTATION CENTER 0 MAX,00 MID,0 0,00 MIN,000 0,0 0 TRUCK FRAME.. STROKE STROKE 0 Drawing: UR-W (Unit: mm)

22 URW0 series,00 kg. LIFTING CAPACITY APPROX. m MAX. HOOK HEIGHT ABOVE GROUND RADIO REMOTE CONTROL SPECIFICATIONS CRANE MODEL URW URW URW URW Max lifting capacity 00kg at.m 00kg at.m 00kg at.m 00kg at.m Max working radius.m.m.m.m Above ground.m.m.0m.m Below ground.m with -part line.m with -part line.m with -part line.m with -part line Min.m, Max.m Min.m, Max 0.0m Min.m, Max.m Min.m, Max.m Max hook height (approx.) Boom length -section box beam -section box beam -section box beam -section box beam type telescoping boom type telescoping boom type telescoping boom type telescoping boom Boom sections Boom raise angle to Slewing angle 0 continuous Single line pull Winch Wire rope.kn {0kgf} Construction: IWRC x WS() GRADE B / Diameter x Length: mm x m / Breaking strength:.kn {0kgf} Construction: IWRC x WS() GRADE B / Diameter x Length: mm x.m/ Breaking strength:.kn {0kgf} Construction: IWRC x WS() GRADE B / Diameter x Length: mm x.m/ Breaking strength:.kn {0kgf} Construction: IWRC x WS() GRADE B/ Diameter x Length: mm x m / Breaking strength:.kn {0kgf} Vertical jacks, double acting hydraulic cylinders with pilot-operated check valves / Horizontal beams, manual extension type Outriggers Retracted:.0m, Extended:.m, Mid-extended:.m,.m Hydraulic pump Rated pressure Hydraulic oil tank capacity Safety devices 0.MPa {0kgf} L Pressure relief valve for hydraulic circuit / Counterbalance valves for boom raising and boom telescoping cylinders / Pilot-operated check valves for vertical outrigger cylinders / Boom angle indicator with load indicator / Hook safety latch / Automatic mechanical brake for winch / Digital load meter / Automatic stop for overwinding / Overwinding alarm / Alarm buzzer / Level / Emergency stop button / Overloading alarm / Turnover protection

23 0 W Sections Boom 0 0 (.) 0 Maximum m ~ (.0m)..0.0 (.m) (.m) (0.0m) (.m) (.) (0.) Sections Boom (.0) 0 Maximum W.m ~ (.m) (.m) (.m) (.) (0.) 0 Sections Boom 0 0 (.) 0 Maximum m. W ~ (.m) (.m) (.) (0.) (.) 0 0 Sections Boom Maximum 0 0 W.m ~ (.) (0.) (.m) CRANE MOUNTING DIMENSIONS CRANE MODEL UR-W, Min.,0 ~ Mid.,0 ~,00 ~ 0,0 ~,0 ~ Max.,0,, UR-W, Min.,0 ~ Mid.,0 ~,0 ~ 0,0 ~ Max.,00,, UR-W, Min.,0 ~ Mid.,0 ~, ~ Max. 0,000,0,0 UR-W, Min.,0 ~ Mid.,0 ~ Max.,00,0,0 00 STROKE, ROTATION CENTER,0 MAX,00 0 MID(),0,00 MID() 0,00 MIN,00 0 TRUCK FRAME.. STROKE STROKE,00 Drawing: UR-W (Unit: mm)

24 URW00 series,00 kg. APPROX. m MAX. HOOK HEIGHT ABOVE GROUND LIFTING CAPACITY RADIO REMOTE CONTROL SPECIFICATIONS CRANE MODEL URW0 URW0 URW0 URW0 Max lifting capacity 00kg at.m 00kg at.m 00kg at.m 00kg at.m Max working radius.m 0.m.m.m Above ground 0.m.0m.m.m Below ground.m with -part line.m with -part line.m with -part line.m with -part line Boom length Min.m, Max.m Min.m, Max 0.m Min.m, Max.m Min.m, Max.m Boom sections -section box beam -section box beam -section box beam -section box beam type telescoping boom type telescoping boom type telescoping boom type telescoping boom Max hook height (approx.) Boom raise angle to Slewing angle 0 continuous Single line pull Winch Wire rope.kn {0kgf} Construction: IWRC x WS() GRADE B / Diameter x Length: mm x m / Breaking strength:.kn {0kgf} Construction: IWRC x WS() GRADE B / Diameter x Length: mm x m / Breaking strength:.kn {0kgf} Construction: IWRC x WS() GRADE B / Diameter x Length: mm x.m / Breaking strength:.kn {0kgf} Construction: IWRC x WS() GRADE B / Diameter x Length: mm x.m / Breaking strength:.kn {0kgf} Vertical jacks, double acting hydraulic cylinders with pilot-operated check valves / Horizontal beams, manual extension type Outriggers Retracted:.m, Extended:.m, Mid-extended:.m,.m Hydraulic pump Rated pressure Hydraulic oil tank capacity Safety devices 0.MPa {0kgf} 0L Pressure relief valve for hydraulic circuit / Counterbalance valves for boom raising and boom telescoping cylinders / Pilot-operated check valves for vertical outrigger cylinders / Boom angle indicator with load indicator / Hook safety latch / Automatic mechanical brake for winch / Digital load meter / Automatic stop for overwinding / Overwinding alarm / Alarm buzzer / Level / Emergency stop button / Overloading alarm / Turnover protection

25 (.) W0 Sections Boom 0 Maximum 0 0.m. 0. ~ (.m) (0.m) (.m) (.) (0.) (.) 0 Sections Boom Maximum W0.m. 0.0 ~ (.m) (0.m) (.) (0.0) (.0) 0 Sections Boom Maximum 0 W0 0.0m ~ (.m) (0.0) (0.) (0.) Sections Boom Maximum 0 W0.0m. 0 (.0) (0.) 0. ~ CRANE MOUNTING DIMENSIONS CRANE MODEL UR-W0, Min.,0 ~ Mid.,0 ~,0 ~,00 ~,0 ~ Max.,0,, UR-W0, Min.,0 ~ Mid.,0 ~,0 ~ 0,0 ~ Max.,0,, UR-W0, Min.,0 ~ Mid.,000 ~,0 ~ Max. 0,0,, UR-W0,0 Min.,0 ~ Mid.,0 ~ Max.,0,, STROKE 0 0 ROTATION CENTER, MAX,00 MID, ,0 MIN,0 0 TRUCK FRAME STROKE 0 STROKE 0 Drawing: UR-W0 (Unit: mm) 0

26 URW0 series,00 kg. APPROX. m MAX. HOOK HEIGHT ABOVE GROUND LIFTING CAPACITY RADIO REMOTE CONTROL SPECIFICATIONS CRANE MODEL URW W/WY URW W/WY URW W/WY URW W/WY URW W/WY Max lifting capacity 00kg at.m 00kg at.m 00kg at.m 00kg at.m 00kg at.m Max working radius.m 0.m.m.m.m Above ground 0.m.m.m.m.m Below ground.m with -part line.m with -part line.m with -part line.m with -part line.m with -part line Min.m Max.m Min.m Max 0.m Min.m Max.m Min.m Max.m Min.m Max.0m Hook height (approx.) Boom length -section box -section box -section box -section box -section box beam type beam type beam type beam type beam type telescoping boom telescoping boom telescoping boom telescoping boom telescoping boom Boom sections Boom raise angle to Slewing angle 0 continuous Single line pull Winch Wire rope.0kn {000kgf} Construction: IWRC x WS() GRADE B / Diameter x Length: mm x m / Breaking strength:.kn {00kgf} Construction: IWRC x WS() GRADE B / Diameter x Length: mm x m / Breaking strength:.kn {00kgf} Construction: IWRC x WS() GRADE B / Diameter x Length: mm x.m / Breaking strength:.kn {00kgf} Construction: IWRC x WS() GRADE B / Diameter x Length: mm x.m / Breaking strength:.kn {00kgf} Construction: IWRC x WS() GRADE B / Diameter x Length: mm x 0m / Breaking strength:.kn {00kgf} Vertical jacks, double acting hydraulic cylinders with pilot-operated check valves / Horizontal beams, manual extension type Outriggers Retracted:.m, Extended:.m, Mid-extended:.m,.m Hydraulic pump Rated pressure Hydraulic oil tank capacity Safety devices 0.MPa {0kgf/cm} 0L Pressure relief valve for hydraulic circuit / Counterbalance valves for boom raising and boom telescoping cylinders / Pilot-operated check valves for vertical outrigger cylinders / Boom angle indicator with load indicator / Hook safety latch / Automatic mechanical brake for winch / Digital load meter / Automatic stop for overwinding / Overwinding alarm / Alarm buzzer / Level / Emergency stop button / Overloading alarm / Turnover protection

27 WW/WY Sections Boom Maximum.m. 0. ~ (.m).0 (.m)..0 (.m) (.0m) (.m) (0.m) (.m) WW/WY Sections Boom Maximum.m. 0.0 ~ (.m)..0 (.m).0.0 (.m) (.m) (.m) (0.m) WW/WY Sections Boom Maximum 0.0m. 0. ~ (.m) (.m) (.m) CRANE MOUNTING DIMENSIONS CRANE MODEL UR-WW/WY, Min.,0 ~ Mid.,0 ~,0 ~,00 ~,0 ~ Max.,0,0, UR-WW/WY, Min.,0 ~ Mid.,0 ~,0 ~ 0,0 ~ Max.,0,,0 UR-WW/WY, Min.,0 ~ Mid.,000 ~,0 ~ Max. 0,0,, 0 Drawing: UR-WW/WY (Unit: mm), SLEWING CENTER 0 00 STROKE,0 MAX:,00 / MID:,00 / MID:,00 / MIN:, STROKE,0 STROKE

28 URU00 series,00 kg. APPROX. m MAX. HOOK HEIGHT ABOVE GROUND LIFTING CAPACITY RADIO REMOTE CONTROL SPECIFICATIONS CRANE MODEL URU0 Max lifting capacity,00kg at.m Max working radius.m Max hook height (approx.) Above ground.m Below ground.m with -part line Boom length Min.m to Max.m Boom sections -section box beam type telescoping boom Boom raise angle to 0 Slewing angle 0 continuous Winch Single line pull,0kg.kn {kgf} Wire rope Construction: IWRC x WS() GRADE B / Diameter x Length: mm x m / Breaking strength:.kn {000kgf} Vertical jacks, double acting hydraulic cylinders with pilot-operated check valves / Horizontal beams, manual extension type Outriggers Retracted:.m, Extended:.m Hydraulic pump Rated pressure 0.MPa {0kgf/cm} Hydraulic oil tank capacity 0L Safety devices Pressure relief valve for hydraulic circuit / Counterbalance valves for boom raising and boom telescoping cylinders / Pilot-operated check valves for vertical outrigger cylinders / Boom angle indicator with load indicator / Hook safety latch / Automatic mechanical brake for winch / Digital load meter / Automatic stop for overwinding / Overwinding alarm / Alarm buzzer / Level / Emergency stop button / Overloading alarm / Turnover protection

29 URU-0-AU Sections Boom Maximum.m (.0m) (0.m) (.m) CRANE MOUNTING DIMENSIONS CRANE MODEL URU-0-AU, 00 Min.,00 ~ Mid.,00 ~ 0,00 ~,000 ~ Max.,00,, Drawing: URU-0-AU (Unit: mm) (), SLEWING CENTER () () 0 STROKE,0 MAX:,00 / MIN:,0 STROKE,0

30 NOTES

31 IMPORTANT NOTES Trademarks are property of their respective owners. Detailed product specifications can be found at All measurements using the metric system, unless otherwise specified. LEGAL SPECIFICATION CHANGES Furukawa Unic Corporation reserves the right to make changes in manufacturing to comply with current or new engineering specification changes where applicable. INSTALLATION COMPLIANCE Before installing any crane, please observe the Vehicle Loading Limitations and stability of the crane/truck combination. Australian Standard AS. provides guidance for the installation, testing and certification of Vehicle Loading Cranes.

32 presented by MAXILIFT AUSTRALIA PTY. LTD. - Dorset Street Lonsdale, South Australia Phone: (0) 00 Fax: (0) Dealer Details Powered by TCPDF (

S P E C I F I C A T I O N S SPEC. No. CT-2190 DATE-SEP. 2007

S P E C I F I C A T I O N S SPEC. No. CT-2190 DATE-SEP. 2007 S P E C I F I C A T I O N S SPEC. No. DATE-SEP. 2007 SPECIFICATlONS HYDRAULIC CRANE MODEL:UNIC URV554 (FOR INDONESIA) Specifications subject to change without notice. UNIC CRANE PERFORMANCE MODEL : URV554

More information

TRUCK LOADER CRANE TM-ZT500. For Medium / Large Size Vehicles NEW MODEL

TRUCK LOADER CRANE TM-ZT500. For Medium / Large Size Vehicles NEW MODEL TRUCK LOADER CRANE TM-ZT00 For Medium / Large Size Vehicles NEW MODEL TM-ZT00 Series THREE-POINT SUPPORT SYSTEM (Equalizer Crane Support) The equalizer crane support system protects the chassis frame by

More information

URW 706. (6.0t x 3m) Mini Crawler Cranes. A 6 tonne capacity at 3m and a hook height of 19.5m, the URW-706 is the highest capacity crane

URW 706. (6.0t x 3m) Mini Crawler Cranes. A 6 tonne capacity at 3m and a hook height of 19.5m, the URW-706 is the highest capacity crane A 6 tonne capacity at 3m and a hook height of 19.5m, the URW-706 is the highest capacity crane CRANE SPECIFICATIONS Crane capacity capacity: 6.0t x 3.0m Max working radius max: 18.6m Max lifting height

More information

MOBILE CRANE BRANCH OF ZOOMLION GROUP

MOBILE CRANE BRANCH OF ZOOMLION GROUP QUY0 SPECIFICATIONS MOBILE CRANE BRANCH OF ZOOMLION GROUP -1- Content 1. Overall dimensions and main specifications 1.1 Overall dimensions and working weight of main machine with basic 1.2 Overall dimensions

More information

ZE500GHRS series ZE500HRS series

ZE500GHRS series ZE500HRS series For Large Size Truck ZE500GHRS series ZE500HRS series (Oceania) IDEAL Cargo Crane, TADANO ZE The ZE features all the Tadano Cargo Crane technology that is recognized the world over. The key development

More information

Maeda MC285CRM(E) Technical specifi cations

Maeda MC285CRM(E) Technical specifi cations Maeda MC285CRM(E) Technical specifi cations Offering the best balance of power and design Slim (750mm) Wide Body Programmable Moment Limiter Rubber Tracks Hydrostatic Transmission Tilt Sensor/Alarm Track

More information

OPERATING RADIUS/LIFTING HEIGHT CHART

OPERATING RADIUS/LIFTING HEIGHT CHART LIFTING CHARTS - Rough Terrain Cranes TADANO MODEL - 50 TON CAPACITY OPERATING RADIUS/LIFTING HEIGHT CHART NOTE: Boom and jib geometry shown are for unloaded condition and machine standing level on firm

More information

TADANO MODEL TR-300XL-3-30 TON CAPACITY WORKING RANGE CHART. LIFTING CHARTS - Rough Terrain Cranes

TADANO MODEL TR-300XL-3-30 TON CAPACITY WORKING RANGE CHART. LIFTING CHARTS - Rough Terrain Cranes LIFTING CHARTS - Rough Terrain Cranes TADANO MODEL - 30 TON CAPACITY WORKING RANGE CHART NOTE: Boom and jib geometry shown are for unloaded condition and machine standing level on firm supporting surface.

More information

TADANO MODEL TM TON CAPACITY

TADANO MODEL TM TON CAPACITY LIFTING CHARTS - Trucks TADANO MODEL TM-35100-35 TON CAPACITY WORKING RANGE 25 45 5 160ʼ 150ʼ 140ʼ 79.5 7 6 100ft + 28.2ʼ jib 100ft + 50.0ʼ jib 5 45 4 35 3 86.2ft 100ft 130ʼ 120ʼ 110ʼ 100ʼ 90ʼ 80ʼ 70ʼ

More information

HYDRAULIC TRUCK CRANE GT-600EX CARRIER : TC section, 11.0 m 43.0 m DIMENSION Overall length. approx. 13,170 mm Overall width

HYDRAULIC TRUCK CRANE GT-600EX CARRIER : TC section, 11.0 m 43.0 m DIMENSION Overall length. approx. 13,170 mm Overall width HYDRAULIC TRUCK CRANE SPEC. SHEET NO. GT-6E-1-31/EX-2 GT-6EX CARRIER : TC-42-2 GENERAL DATA CRANE CAPACITY 6, kg at 3. m BOOM 5-section, 11. m 43. m DIMENSION Overall length approx. 13,17 mm Overall width

More information

MOBILE CRANE BRANCH OF ZOOMLION GROUP

MOBILE CRANE BRANCH OF ZOOMLION GROUP QUY200 SPECIFICATIONS MOBILE CRANE BRANCH OF ZOOMLION GROUP - 1 - Content 1. Overall dimensions and main specifications 1.1 Overall dimensions and working weight of main machine with basic 1.2 Overall

More information

TADANO ROUGH TERRAIN CRANE. (Left-hand steering) GENERAL DATA. BOOM 4-section, 9.7 m m

TADANO ROUGH TERRAIN CRANE. (Left-hand steering) GENERAL DATA. BOOM 4-section, 9.7 m m DATE July, 2004 TADANO ROUGH TERRAIN CRANE MODEL : GR-300EX (Left-hand steering) GENERAL DATA CRANE CAPACITY 30,000 kg at 3.0 m BOOM 4-section, 9.7 m - 31.0 m DIMENSION Overall length approx. 11,245 mm

More information

TADANO TRUCK CRANE. Provisional Specifications GENERAL DATA. 4-section, 10.5 m 33.0 m

TADANO TRUCK CRANE. Provisional Specifications GENERAL DATA. 4-section, 10.5 m 33.0 m DATE July, 2006 TADANO TRUCK CRANE MODEL : TL-300E Provisional Specifications GENERAL DATA CRANE CAPACITY 30,000 kg at 3.0 m BOOM 4-section, 10.5 m 33.0 m DIMENSION MASS Overall length approx. 12,670 mm

More information

TADANO ROUGH TERRAIN CRANE : GR-300EX. (Left-hand steering) GENERAL DATA. BOOM 4-section, 9.7 m m

TADANO ROUGH TERRAIN CRANE : GR-300EX. (Left-hand steering) GENERAL DATA. BOOM 4-section, 9.7 m m TADANO ROUGH TERRAIN CRANE MODEL : GR-300EX (Left-hand steering) GENERAL DATA CRANE CAPACITY 30,000 kg at 3.0 m BOOM 4-section, 9.7 m - 31.0 m DIMENSION MASS Overall length approx. 11,245 mm Overall width

More information

(6.0t x 3.0m) Safe load indicator CRANE SPECIFICATIONS

(6.0t x 3.0m) Safe load indicator CRANE SPECIFICATIONS URW- (.t x.m) Tota width.m Max working radius.m Diese powered and optiona mains eectric Zero ength increase with eectric option Radio remote contro as standard Working area imitation Stowabe fy (extension)

More information

TADANO ROUGH TERRAIN CRANE : GR-700EX. (Left-hand steering) G E N E R A L D ATA

TADANO ROUGH TERRAIN CRANE : GR-700EX. (Left-hand steering) G E N E R A L D ATA SPEC. SHEET No. GR-7E-1-214/EU-51 DATE June, 21 TADANO ROUGH TERRAIN CRANE MODEL : GR-7EX (Left-hand steering) G E N E R A L D ATA CRANE CAPACITY BOOM 7, kg at 3. m 5-section, 11.5 m 44. m DIMENSION Overall

More information

Puyuan. QUY 50 Crawler Crane Technical Manual

Puyuan. QUY 50 Crawler Crane Technical Manual Puyuan QUY 50 Crawler Crane Technical Manual 5591796 Pictures and technical parameters in sample books may not accord with the delivery goods because of the improvement in design. Please understand and

More information

Courtesy of Crane.Market

Courtesy of Crane.Market CM19 TELESCOPIC CRANE PRELIMINARY CONTENTS / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / Crane Features...4 Boom Diagram...5 Load

More information

Global Cranes & Machinery, LLC

Global Cranes & Machinery, LLC Global Cranes & Machinery, LLC 7 Jersey Shore Drive Houston, TX 777 USA Toll Free: (66) 7-97 Tel: + (7) 56- Fax: + (7) 56-5 E-mail: info@globalcranesales.com www.globalcranes.com Contents Vision Creates

More information

SPEC. SHEET No. GR-800E /EU-01 DATE November, 2012 TADANO ROUGH TERRAIN CRANE M ODEL : GR-800EX (Left-hand steering) G E N E R A L D ATA CRANE

SPEC. SHEET No. GR-800E /EU-01 DATE November, 2012 TADANO ROUGH TERRAIN CRANE M ODEL : GR-800EX (Left-hand steering) G E N E R A L D ATA CRANE DATE November, 212 TADANO ROUGH TERRAIN CRANE M ODEL : GR-8EX (Left-hand steering) G E N E R A L D ATA CRANE CAPACITY 8, kg at 3. m BOOM 5-section, 12. m 47. m DIMENSION Overall length approx. 14,375 mm

More information

Lifting Capacities Telescopic Boom All Terrain Crane ATC ton (118 metric ton) Link Belt

Lifting Capacities Telescopic Boom All Terrain Crane ATC ton (118 metric ton) Link Belt Lifting Capacities Telescopic Boom All Terrain Crane ATC 3130 130 ton (118 metric ton) Boom and fly capacities for this machine are listed by the following sections: Fully Extended Outriggers Working Range

More information

MODEL : TM-1882 CRANE SPECIFICATIONS. MAXIMUM LIFTING CAPACITY lines)

MODEL : TM-1882 CRANE SPECIFICATIONS. MAXIMUM LIFTING CAPACITY lines) DATE February, 2010 MODEL : TM-1882 CRANE SPECIFICATIONS MAXIMUM LIFTING CAPACITY 17,000kg@1.5m(6-part lines) BOOM WINCH SWING 6-sectioned, fully powered partly synchronized telescoping boom of pentagonal

More information

HYDRAULIC TRUCK CRANE

HYDRAULIC TRUCK CRANE HYDRAULIC TRUCK CRANE SPEC. SHEET NO. GT-55E-1-12/EX-91 GT-55E CARRIER : TC-4255 GENERAL DATA CRANE CAPACITY 55, kg at 3. m BOOM 5-section, 11.1 m - 42.m DIMENSION Overall length approx. 13,48 mm Overall

More information

GT-550E. 55 Metric Tons Capacity EURO-2 HYDRAULIC TRUCK CRANE DIMENSION. Spec. sheet No. GT-550E /C-70

GT-550E. 55 Metric Tons Capacity EURO-2 HYDRAULIC TRUCK CRANE DIMENSION. Spec. sheet No. GT-550E /C-70 GT-550E 55 Metric Tons Capacity EURO-2 HYDRAULIC TRUCK CRANE DIMENSION TAIL SWING R3650 MIN 2390 2720 2820 MID 4600 REAR AXLE CENTER 290 2110 MAX 0 400 5480 MIN. 11100 - MAX. 42000 3 SIDE REFL 2650 SIDE

More information

CM170 TELESCOPIC CRANE CONTENTS ///////////////////////////////////////////////////////////////////////////////////////// Crane Features...4 Boom Diagram...5 Load Chart: Main Boom & Jib...6 LMI Codes...7

More information

HYDRAULIC ROUGH TERRAIN CRANE GENERAL DATA CRANE SPECIFICATIONS SPEC. SHEET NO. GR-500E /EX-02. Left hand steering CRANE CAPACITY

HYDRAULIC ROUGH TERRAIN CRANE GENERAL DATA CRANE SPECIFICATIONS SPEC. SHEET NO. GR-500E /EX-02. Left hand steering CRANE CAPACITY HYDRAULIC ROUGH TERRAIN CRANE GR-500EX Left hand steering GENERAL DATA CRANE CAPACITY 50,000 kg at m BOOM 4-section, 10.7 m - 34.7 m DIMENSION Overall length approx. 13,055 mm Overall width approx. 2,980

More information

EXCEPTIONAL PRODUCTIVITY

EXCEPTIONAL PRODUCTIVITY BOOM TRUCK CRANES Range Brochure metric / imperial EXCEPTIONAL PRODUCTIVITY BT 2047 BT 2057 BT 3063 TM 3851 BT 3870 BT 4792 RM 4792 BT 28106 BT 70100 RS 70100 Crossover 4500 Crossover 5000 Crossover 6000

More information

SPEC. SHEET No. GR-600E /EU-01 DATE November, 2012 TADANO ROUGH TERRAIN CRANE MODEL : GR-600EX (Left-hand steering) G E NER A L DATA CRANE CAPA

SPEC. SHEET No. GR-600E /EU-01 DATE November, 2012 TADANO ROUGH TERRAIN CRANE MODEL : GR-600EX (Left-hand steering) G E NER A L DATA CRANE CAPA DATE November, 212 TADANO ROUGH TERRAIN CRANE MODEL : GR-6EX (Left-hand steering) G E NER A L DATA CRANE CAPACITY 6, kg at 3. m BOOM 5-section, 11. m 43. m DIMENSION Overall length approx. 13,38 mm Overall

More information

CRANE SPECIFICATIONS MODEL GR-300 EX CAPACITY 30,000kg at 3.0m BOOM Four section full power partially synchronized telescoping boom of round hexagonal

CRANE SPECIFICATIONS MODEL GR-300 EX CAPACITY 30,000kg at 3.0m BOOM Four section full power partially synchronized telescoping boom of round hexagonal DATE August, 2012 TADANO ROUGH TERRAIN CRANE M ODEL : GR-300EX (Left-hand steering) GENERAL DATA CRANE CAPACITY 30,000 kg at 3.0 m BOOM 4-section, 9.7 m - 31.0 m DIMENSION MASS Overall length approx. 11,245

More information

MODEL : GT-550EX EURO-2

MODEL : GT-550EX EURO-2 DATE February, 2007 TADANO TRUCK CRANE MODEL : GT-550EX EURO-2 GENERAL DATA CRANE CAPACITY 55,000 kg at 3.0 m BOOM 5-section, 11.1 m 42.0 m DIMENSION MASS Overall length approx. 13,480 mm Overall width

More information

C R A N E SPECIFICATIONS MODEL GR-1450EX CAPACITY 145,000 kg at 2.5 m BOOM 6 sections extended by single telescoping cylinder, 13.1m~61.0m, of round b

C R A N E SPECIFICATIONS MODEL GR-1450EX CAPACITY 145,000 kg at 2.5 m BOOM 6 sections extended by single telescoping cylinder, 13.1m~61.0m, of round b TADANO ROUGH TERRAIN CRANE MODEL : GR-1450EX - Hydraulic offset jib model - (Left-hand steering) G E NERAL D ATA CRANE CAPACITY 145,000 kg at 2.5 m BOOM 6-section, 13.1 m 61.0 m DIMENSION MASS Overall

More information

GT-550E 55 Metric Tons Capacity

GT-550E 55 Metric Tons Capacity GT-55E 55 Metric Tons Capacity EURO-2 HYDRAULIC TRUCK CRANE Spec. sheet No. GT-55E-1-132/EX-5 DIMENSIONS MIN. 111 - MAX. 42 368 SIDE REFL (RED) 265 CENTER LIGHT 14 o 85 REFL 24 12 o 124 SIDE TURN 39 62

More information

ROU GH T ERRAI N CRAN E

ROU GH T ERRAI N CRAN E ROU GH T ERRAI N CRAN E SPECIFICATION CARRIER CRANE Description Rough terrain crane with maximum lifting capacity 3 ton Crane specification Maximum rated lifting capacity length Fly jib length Maximum

More information

ROUGH TERRAIN CRANE SPECIFICATION. Engine. Type. Transmission. Axles. Suspension. Brake system. Steering. Tire size.

ROUGH TERRAIN CRANE SPECIFICATION. Engine. Type. Transmission. Axles. Suspension. Brake system. Steering. Tire size. ROUGH TERRAIN CRANE CRANE Specifi cation Maximum lifting capacity 70ton 2.5m length (6 section) Fly jib length 8.3m-13.2m (2 section, offset 7 60 ) Maximum rated lifting height 45.5m () 58.6m (jib) Hoisting

More information

TADANO ROUGH TERRAIN CRANE : GR-550EX. (Left-hand steering) G E N E R A L D ATA

TADANO ROUGH TERRAIN CRANE : GR-550EX. (Left-hand steering) G E N E R A L D ATA DATE June, 21 TADANO ROUGH TERRAIN CRANE MODEL : GR-55EX (Left-hand steering) G E N E R A L D ATA CRANE CAPACITY 55, kg at 3. m BOOM 5-section, 11.1 m - 42.m DIMENSION Overall length Overall width Overall

More information

Fully Hydraulic Crawler Crane

Fully Hydraulic Crawler Crane Fully Hydraulic Crawler Crane Max. Lifting Capacity : 0t Max. Boom Length : 75m Max. Jib Combination : 63m + 5m General dimensions (with basic boom) (Unit : mm) Main specifications Performance Slewing

More information

NEW RK SERIES ROUGH TERRAIN CRANE RK500. Max. Lifting Capacity: 51 tons x 2.9 m Max. Boom Length: 39.0 m

NEW RK SERIES ROUGH TERRAIN CRANE RK500. Max. Lifting Capacity: 51 tons x 2.9 m Max. Boom Length: 39.0 m NEW RK SERIES ROUGH TERRAIN CRANE S P E C I F I C A T I O N S Max. Lifting Capacity: 51 tons x 2.9 m Max. Boom Length: 39.0 m 369 SPECIFICATIONS UPPER STRUCTURE SWING UNIT A hydraulic piston motor drives

More information

NEW RK SERIES. Model: RK350-2 ROUGH TERRAIN CRANE RK350. Max. Lifting Capacity: 35 tons x 3.0 m Max. Boom Length: 35.0 m

NEW RK SERIES. Model: RK350-2 ROUGH TERRAIN CRANE RK350. Max. Lifting Capacity: 35 tons x 3.0 m Max. Boom Length: 35.0 m NEW RK SERIES Model: RK350-2 ROUGH TERRAIN CRANE RK350 S P E C I F I C A T I O N S Max. Lifting Capacity: 35 tons x 3.0 m Max. Boom Length: 35.0 m 341 SPECIFICATIONS UPPER STRUCTURE SWING UNIT A hydraulic

More information

CONTENTS TM200 TELESCOPIC CRANE

CONTENTS TM200 TELESCOPIC CRANE TM200 TELESCOPIC CRANE CONTENTS ///////////////////////////////////////////////////////////////////////////////////////// Crane Features...4 Boom Diagram...5 Chart: Main Boom & Jib...6 LMI Codes...7 Reeving

More information

DONGHAE MACHINERY & AVIATION Co., Ltd TECHNICAL SPECIFICATION MODEL SERIES

DONGHAE MACHINERY & AVIATION Co., Ltd TECHNICAL SPECIFICATION MODEL SERIES DONGHAE MACHINERY & AVIATION Co., Ltd TECHNICAL SPECIFICATION MODEL - 433 SERIES Model Series Revision 05 Date May 16, 2012 2 1. Terminology Diagram/L No. Description No. Description 1 Unit (Including

More information

Telescoping boom truck mounted crane Known World Wide, TADANO Quality in North America

Telescoping boom truck mounted crane Known World Wide, TADANO Quality in North America MAXIMUM LIFTING CAPACITY: 10,000 lbs EXTENDED LENGTH: 51.4 (TM-ZR6XL) Telescoping boom truck mounted crane Known World Wide, TADANO Quality in North America TM-ZR0XL series [5ton] crane specifications

More information

PRELIMINARY CONTENTS CM190 TELESCOPIC CRANE

PRELIMINARY CONTENTS CM190 TELESCOPIC CRANE CM190 TELESCOPIC CRANE PRELIMINARY CONTENTS /////////////////////////////////////////////////////////// Crane Features...4 Boom Diagram...5 Load Chart: Main Boom & Jib...6 LMI Codes...7 Reeving Diagram...7

More information

General Dimensions (with basic boom) (Unit : mm)

General Dimensions (with basic boom) (Unit : mm) General Dimensions (with basic boom) (Unit : mm) Specifications Performance Swing speed.4rpm Travel speed.0/0.5 km/hr Gradeability 30% (6.7º) Engine Make Cummins Inc. Model QSM Type 4-cycle,6-cylinder,water-cooled,turbo-charged

More information

GT-550E-2. Hydraulic Truck Crane. Crane Capacity 55,000 kg at 3.0 m

GT-550E-2. Hydraulic Truck Crane. Crane Capacity 55,000 kg at 3.0 m GT-550E-2 Crane Capacity 55,000 kg at 3.0 m Euro-3 Hydraulic Truck Crane DIMENSIONS - Over all length:13,480mm - Over all width: 2,820mm - Over all height: 3,680mm MASS Gross Vehicle mass:41,500kg - Front:16,800kg

More information

HYDRAULIC ROUGH TERRAIN CRANE GENERAL DATA CRANE SPECIFICATIONS SPEC. SHEET NO. GR-300E /EX-41. Left hand steering CRANE CAPACITY

HYDRAULIC ROUGH TERRAIN CRANE GENERAL DATA CRANE SPECIFICATIONS SPEC. SHEET NO. GR-300E /EX-41. Left hand steering CRANE CAPACITY HYDRAULIC ROUGH TERRAIN CRANE GR-300EX Left hand steering GENERAL DATA CRANE CAPACITY 30,000 kg at 3.0 m BOOM 4-section, 9.7 m - 31.0 m DIMENSION Overall length approx. 11,245 mm Overall width approx.

More information

FULLY HYDRAULIC TRUCK CRANE

FULLY HYDRAULIC TRUCK CRANE CRANE Description Model Specification Maximum rated lifting capacity length Fly jib length Maximum lifting height Main Hoisting line winch speed Auxiliary winch Main Hoisting winch speed Auxiliary winch

More information

HYDRAULIC TRUCK CRANE

HYDRAULIC TRUCK CRANE HYDRAULIC TRUCK CRANE SPEC. SHEET NO. GT-55E-1-12/EX-93 GT-55EX CARRIER : TC-4255 GENERAL DATA CRANE CAPACITY 55, kg at 3. m BOOM 5-section, 11.1 m - 42.m DIMENSION Overall length approx. 13,48 mm Overall

More information

Fully Hydraulic Crawler Crane

Fully Hydraulic Crawler Crane Fully Hydraulic Crawler Crane Lifting Capacity 0 metric tons General Dimensions (with basic boom) (Unit : mm) Specifications Performance Swing speed Travel speed Gradeability Engine Make Model Crane specifications

More information

250 ton (220.0 mt) All Terrain Crane

250 ton (220.0 mt) All Terrain Crane 250 ton (220.0 mt) All Terrain Crane 43.3-223.1 ft (13.2-68.0 m) six section boom with quick reeve boom head Automatic load compensator maintains consistent radius during load lift-off Multiple steering

More information

LHM 600. Mobile Harbour Crane

LHM 600. Mobile Harbour Crane Mobile Harbour Crane LHM 600 Maximum lifting capacity 208 t Maximum outreach 58 m Ship size New Panamax Very Large Bulk Carrier Ultra Large Container Vessel Main Dimensions Heavy Lift Operation Lifting

More information

TADANO ROUGH TERRAIN CRANE. (Right-hand steering) GENERAL DATA. 6-section, 5.3 m m

TADANO ROUGH TERRAIN CRANE. (Right-hand steering) GENERAL DATA. 6-section, 5.3 m m DATE February, 2009 TADANO ROUGH TERRAIN CRANE MODEL : GR-120NL (Right-hand steering) GENERAL DATA CRANE CAPACITY BOOM 12,000 kg at 2.0 m 6-section, 5.3 m - 23.8 m DIMENSIONS Overall length approx. 7,540

More information

Mobile Harbour Crane LHM 550. Maximum lifting capacity 154 t Maximum outreach 54 m Ship size New Panamax, Capesize

Mobile Harbour Crane LHM 550. Maximum lifting capacity 154 t Maximum outreach 54 m Ship size New Panamax, Capesize Mobile Harbour Crane LHM 550 Maximum lifting capacity 154 t Maximum outreach 54 m Ship size New Panamax, Capesize Main Dimensions Heavy Lift Operation Lifting Capacities Heavy Lift Operation Load Diagram

More information

View thousands of Crane Specifications on FreeCraneSpecs.com

View thousands of Crane Specifications on FreeCraneSpecs.com 40142 40142 SIDE VIEW DIAGRAM Maximum Vertical Reach Working Area Lifting Capacity Boom Length Crane Weight (Standard) Jib Lengths Winch Bare Drum Pull 201'/61.3 m 360 Degrees 80,000 lbs/36,287 kg 142

More information

GR-550EX HYDRAULIC ROUGH TERRAIN CRANE GENERAL DATA CRANE SPECIFICATIONS SPEC. SHEET NO. GR-550E /EX-12. Left hand steering CRANE CAPACITY

GR-550EX HYDRAULIC ROUGH TERRAIN CRANE GENERAL DATA CRANE SPECIFICATIONS SPEC. SHEET NO. GR-550E /EX-12. Left hand steering CRANE CAPACITY HYDRAULIC ROUGH TERRAIN CRANE SPEC. SHEET NO. GR-55E-1-212/EX-12 CRANE SPECIFICATIONS GR-55EX GENERAL DATA Left hand steering CRANE CAPACITY 55, kg at 3. m BOOM 5-section, 11.1 m - 42. m DIMENSION Overall

More information

CARRIER : TC CRANE CAPACITY 30,000 kg at 3.0 m

CARRIER : TC CRANE CAPACITY 30,000 kg at 3.0 m CARRIER : TC-4230 GENERAL DATA CRANE CAPACITY 30,000 kg at 3.0 m BOOM 4-section, 10.5m 33.0m DIMENSION Overall length approx. 12,670 mm Overall width approx. 2,490 mm Overall height approx. 3,450 mm MASS

More information

Mobile Harbour Crane LHM 600

Mobile Harbour Crane LHM 600 Mobile Harbour Crane LHM 600 Main dimensions Heavy duty operation Load diagram 220 200 Capacity (t) 180 160 140 120 100 80 60 40 20 0 on the ropes twin lift spreader single lift spreader 0 5 10 15 20 25

More information

Mobile Harbour Crane LHM 800

Mobile Harbour Crane LHM 800 Mobile Harbour Crane LHM 800 Main dimensions Heavy duty operation Load diagram on the ropes 320 280 240 Capacity (t) 200 160 120 80 40 0 0 5 10 15 20 25 30 35 40 45 50 55 60 65 Outreach (m) 47.4 m Boom

More information

MOBILE CRANE BRANCH OF ZOOMLION GROUP

MOBILE CRANE BRANCH OF ZOOMLION GROUP QUY70 SPECIFICATIONS MOBILE CRANE BRANCH OF ZOOMLION GROUP -1 - Content 1. Overall dimensions and main specifications 1.1 Overall dimensions and working weight of main machine with basic boom 1.2 Overall

More information

ROUGH TERRAIN CRANE SPECIFICATION. CARRIER Carrier specification Maximum traveling speed 49km/h Grade ability

ROUGH TERRAIN CRANE SPECIFICATION. CARRIER Carrier specification Maximum traveling speed 49km/h Grade ability ROUGH TERRAIN CRANE CRANE Description Rough terrain crane with maximum lifting capacity 13 ton Crane specification 5.3 m 13,000kg 1.7 m (Parts of line : 8) 9.04 m 6,000kg 4.0 m (Parts of line : 4) 12.78

More information

KATO KRM-13H. 13 TONNE HYDRAULIC SLEW CRANE Specification

KATO KRM-13H. 13 TONNE HYDRAULIC SLEW CRANE Specification KATO KRM-13H 13 TONNE HYDRAULIC SLEW CRANE Specification Height Length Width Regd Weight TARE 2.845 m 7.375 m 1.995 m 13140 kgs ROUGH TERRAIN CRANE CRANE Description Rough terrain crane with maximum lifting

More information

GR-1450EX ROUGH TERRAIN CRANE

GR-1450EX ROUGH TERRAIN CRANE ROUGH TERRAIN CRANE GR-1EX Crane capacity : 1, kg at 2.5 m 6-section long boom : 13.1 m - 61. m 2-staged bi-fold jib : 1.3 / 18. m Maximum lifting height : 61.3 m ( Boom ).2 m ( Hydraulic Offset Jib ).4

More information

ED5800H SPECIFICATION

ED5800H SPECIFICATION SPEC.F5-3713E ED5800H Hydraulic Earth Drilling Rig SPECIFICATION March, 2011 Nagoya, Japan Tel : 81- (52) - 623-3529 Fax: 81- (52) - 623-4349 Due to company policy of continuous development and improvement,

More information

30105F-D TECHNICAL SPECIFICATIONS 30105F-D SIDE VIEW DIAGRAM. Maximum Vertical Reach. Powered Boom Sections 4 Overall Height

30105F-D TECHNICAL SPECIFICATIONS 30105F-D SIDE VIEW DIAGRAM. Maximum Vertical Reach. Powered Boom Sections 4 Overall Height 30105F-D 30105F-D SIDE VIEW DIAGRAM Maximum Vertical Reach 162'/49 m Working Area 180 Degrees Standard (360 Optional) Lifting Capacity 60,000 lbs/27 216 kg Boom Length 105 /32 m Crane Weight (Standard)

More information

Kato CR-200 Ri. 20 t All Terrain Crane. Tel: Fax:

Kato CR-200 Ri. 20 t All Terrain Crane.   Tel: Fax: Kato CR-200 Ri 20 t All Terrain Crane 1565 3165 2965 2245 1665 200 200 1575 350 10 1880 5 13. 350 3210 Min: 6500 Max: 28000 Stroke: 21500 1685 6940 3345 2115 3250 8710 Ramp break over : 23゚ When the suspension

More information

For Sales Use Only! HTC 8650 Series II CRANE RATING MANUAL 4 SECTION POWER BOOM SERIAL NUMBER. not for crane operations

For Sales Use Only! HTC 8650 Series II CRANE RATING MANUAL 4 SECTION POWER BOOM SERIAL NUMBER. not for crane operations HTC 8650 Series II CRANE RATING MANUAL 4 SECTION POWER BOOM SERIAL NUMBER For Replacement, Order Part Number: L8P0001 (022603) Link Belt is a registered trademark. Page Contents 3 Operating Instructions

More information

THE WORLD S FAVOURITE MINI CRANES

THE WORLD S FAVOURITE MINI CRANES THE WORLD S FAVOURITE MINI CRANES MC104 MC174 MC285-2 MC305-2 MC405 LC383 LC785 LC1385 Maeda Mini Cranes Time and time again these innovative machines are proving their worth. From panelling and cladding,

More information

Kato SR-700L. Load Chart

Kato SR-700L. Load Chart Kato SR-700L Chart ROUGH TERRAIN CRANE CRANE Specifi cation Maximum lifting capacity length 70ton 2.5m 10.0m 44.5m (6 section) Fly jib length 8.3m-13.2m (2 section, offset 7 60 ) Maximum rated lifting

More information

ALL TERRAIN CRANE GA-1500N

ALL TERRAIN CRANE GA-1500N ALL TERRAIN CRANE GA GA-1500N JAPANESE SPECIFICATIONS CARRIER MODEL FAUN RTF120-5 SPEC. NO. GA-1500N-1-90101 Control No. GA-1500N-1-90101 / JA-03-1 - CRANE CAPACITY 12.6m Boom 150,000kg at 2.7m (21part-line,

More information

CROSSOVER 8000 CROSSOVER T capacity class Boom Truck Crane Datasheet imperial. Features

CROSSOVER 8000 CROSSOVER T capacity class Boom Truck Crane Datasheet imperial. Features 80T capacity class Boom Truck Crane Datasheet imperial PRE AR N I M LI Y Features 80 ton rated capacity @ 10 ft from center of rotation 126 ft maximum boom length 135 ft maximum tip height 33/57 ft optional

More information

TELESCOPIC CRAWLER CRANE Max. Lifting Capacity 75t 3.0m Comply with Japanese Construction Codes for Mobile Cranes.

TELESCOPIC CRAWLER CRANE Max. Lifting Capacity 75t 3.0m Comply with Japanese Construction Codes for Mobile Cranes. 75 Model TK750 TELESCOPIC CRAWLER CRANE Max. Lifting Capacity 75t m Comply with Japanese Construction Codes for Mobile Cranes. kgeneral SPECIFICATION Model Weight Operating weight t Ground pressure kpa{kgf/cm

More information

40142R TECHNICAL SPECIFICATIONS 40142R SIDE VIEW DIAGRAM. Maximum Vertical Reach. Powered Boom Sections 5 Overall Height. 210'/64 m Working Area

40142R TECHNICAL SPECIFICATIONS 40142R SIDE VIEW DIAGRAM. Maximum Vertical Reach. Powered Boom Sections 5 Overall Height. 210'/64 m Working Area 40142R 40142R SIDE VIEW DIAGRAM Maximum Vertical Reach 210'/64 m Working Area 360 Degrees Lifting Capacity 80,000 lbs/36 287 kg Boom Length 142 /43,3 m Crane Weight (Standard) 41,700 lbs/18 915 kg Jib

More information

SPECIFICATION. CRANE Specification. CARRIER Specification

SPECIFICATION. CRANE Specification. CARRIER Specification CRANE Specification Description Model KATO FULLY HYDRAULIC ALL TERRAIN CRANE KA-1300SL Maximum lifting capacity 130ton 2.5m Boom length 11.8m 52.0m (6 section) SL jib length 9.2m-26.6m ( section) Hoisting

More information

Mantis Rerailer. General Specifications

Mantis Rerailer. General Specifications General Specifications 1. Typical Operating Parameters 2. General 1.1 Operating temperatures will typically be between -4 F (-20 C) to 122 F (50 C). 1.2 Relative humidity ranges between 20% and 100%. 1.3

More information

PRODUCT OVERVIEW.

PRODUCT OVERVIEW. PRODUCT OVERVIEW www.weldco-hydralift.com CONTENTS WHL23TC60/75/100...4 HL30TC70...8 OUR PRODUCTS Weldco Hydra-Lift manufactures truck mounted telescopic cranes ranging from 23-ton to 50-ton capacities.

More information

ROUGH TERRAIN CRANE. Table of contents SPECIFICATION 1 LIFTING CAPACITIES. Stationary on rubber 2 Pick & carry m Boom+10.

ROUGH TERRAIN CRANE. Table of contents SPECIFICATION 1 LIFTING CAPACITIES. Stationary on rubber 2 Pick & carry m Boom+10. ROUGH TERRAIN CRANE Table of contents SPECIFICATION 1 LIFTING CAPACITIES 2 Stationary on rubber 2 Pick & carry 2 17.5m +6.5m SL Jib 3 17.5m +10.25m SL Jib 3 17.5m +14.0m SL Jib 3 32.5m +6.5m SL Jib 5 32.5m

More information

TECHNICAL SPECIFICATIONS

TECHNICAL SPECIFICATIONS 40142 40142 SIDE VIEW DIAGRAM Maximum Vertical Reach 207'/63,1 m Working Area 360 Degrees Lifting Capacity 80,000 lbs/36 287 kg Boom Length 142 /43,3 m Crane Weight (Standard) 40,300 lbs/18 280 kg Jib

More information

30105F TECHNICAL SPECIFICATIONS 30105F SIDE VIEW DIAGRAM. Maximum Vertical Reach. Powered Boom Sections 4 Overall Height

30105F TECHNICAL SPECIFICATIONS 30105F SIDE VIEW DIAGRAM. Maximum Vertical Reach. Powered Boom Sections 4 Overall Height 30105F 30105F SIDE VIEW DIAGRAM 6 Maximum Vertical Reach 162'/49 m Working Area 180 Degrees Standard (360 Optional) Lifting Capacity 60,000 lbs/27 216 kg Boom Length 105 /32 m Crane Weight (Standard) 28,160

More information

TL-250M-3/C1-1E. Publication No. Truck Crane Model TL-250M-3. Applicable Serial No

TL-250M-3/C1-1E. Publication No. Truck Crane Model TL-250M-3. Applicable Serial No Publication No. TL-250M-3/C1-1E 01 Truck Crane Model TL-250M-3 Applicable Serial No. 340355 - Foreword Foreword This manual contains all the hydraulic and electric circuit diagrams for the Model TL-250M-3

More information

ALL TERRAIN CRANE GA-700N

ALL TERRAIN CRANE GA-700N ALL TERRAIN CRANE GA GA-7N JAPANESE SPECIFICATIONS CARRIER MODEL NISSAN KL-AU552WN SPEC. NO. GA-7N-1-112 Control No. GA-7N-1-112 / JA-2-1 - GA-7N-1-112/JA-2 GA-7N CRANE SPECIFICATIONS CRANE CAPACITY 11.5m

More information

QY70K-ⅠTruck Crane Highlights

QY70K-ⅠTruck Crane Highlights QY70K-ⅠTruck Crane Highlights 1. Full dimension flat-head cab for chassis, all covered walking surface, double H-type outriggers and a fifth jack are available, as well as 360 º operation of boom, power

More information

ROUGH TERRAIN CRANE DIMENSIONS

ROUGH TERRAIN CRANE DIMENSIONS TR-450XL-4 45 Ton Capacity (40.8 Metric Tons) HYDRAULIC ROUGH TERRAIN CRANE DIMENSIONS GENERAL DIMENSIONS (23.5 x 25 Tires) Note: Dimension is with boom angle at -0.8 degree. Feet Meters Turning radius:

More information

ROUGH TERRAIN CRANE TR-160M

ROUGH TERRAIN CRANE TR-160M ROUGH TERRAIN CRANE TR-160M JAPANESE SPECIFICATIONS TR OUTLINE 6-section Boom, 1-staged Jib H-type Outrigger SPEC. NO. Control No. JA-0 39 TR-160M CRANE SPECIFICATIONS CRANE CAPACITY 6.5m Boom 16,000kg

More information

Provisional Specifications GS-300XL. 30 Ton Capacity (27.2 Metric Tons) HYDRAULIC TRUCK CRANE DIMENSIONS

Provisional Specifications GS-300XL. 30 Ton Capacity (27.2 Metric Tons) HYDRAULIC TRUCK CRANE DIMENSIONS Provisional Specifications GS-300XL 30 Ton Capacity (27.2 Metric Tons) HYDRAULIC TRUCK CRANE DIMENSIONS GENERAL DIMENSIONS Feet Meters TRAVELING Turning radius Max. traveling speed 80.8mph (130km/h) Front

More information

50105R TECHNICAL SPECIFICATIONS 50105R SIDE VIEW DIAGRAM. Powered Boom Sections 4 Overall Height

50105R TECHNICAL SPECIFICATIONS 50105R SIDE VIEW DIAGRAM. Powered Boom Sections 4 Overall Height 50105R 50105R SIDE VIEW DIAGRAM Maximum Vertical Reach Working Area Lifting Capacity Boom Length Crane Weight (Standard) Jib Lengths Winch Bare Drum Pull 164'/50 m 360 Degrees 100,000 lbs/45,359 kg 105

More information

Table of Contents. Boom. Power Jib. Boom. (Stationary on rubber) Boom. (Pick & Carry) Searcher hook. (Option)

Table of Contents. Boom. Power Jib. Boom. (Stationary on rubber) Boom. (Pick & Carry) Searcher hook. (Option) Boom Power Jib Boom (Stationary on rubber) Boom (Pick & Carry) Searcher hook (Option) Searcher hook (Stationary on rubber)(option) Searcher hook (Pick & Carry)(Option) Table of Contents SPECIFICATION 1

More information

STC200S-8 STC200S-8 TRUCK CRANE 20 TONS LIFTING CAPACITY. Quality Changes the World

STC200S-8 STC200S-8 TRUCK CRANE 20 TONS LIFTING CAPACITY. Quality Changes the World STC200S-8 20 TONS LIFTING CAPACITY 2 COMPANY BRIFE INTRODUCTION COMPANY BRIFE INTRODUCTION 3 SANY Automobile Hoisting Machinery is one of the core business unit of Sany Heavy Industry, mainly engaged in

More information

Specifications & Lifting Capacities

Specifications & Lifting Capacities Stage III B / Tier 4 i HYDRAULIC CRAWLER CRANE & Lifting Capacities Hoist Rope mm 40 0H.EA2 VARIATION Variation of The Attachment Line Speed * Front / Rear Winch (Rated with t load) Third Winch (Rated

More information

TECHNICAL SPECIFICATIONS

TECHNICAL SPECIFICATIONS RT60 ROUGH TERRAIN CRANE TECHNICAL SPECIFICATIONS RT60/27Y-2014 (0075110-000) ZOOMLION HEAVY INDUSTRY SCIENCE AND TECHNOLOGY CO., LTD. INTRODUCTION RT60 rough terrain crane is of wide tread, high stability,

More information

Technical Data. Mobile Harbour Crane GHC80TD1

Technical Data. Mobile Harbour Crane GHC80TD1 Technical Data Mobile Harbour Crane GHC80TD1 Technical Data 10m 44m 7m 19.5m 16m 13m 11.5m 15m Capacity under different operation Grab operation - bulk cargo 40t A6 Container 65t A5 Travel gear Axle alignments

More information

A FLEXIBLE ALL-ROUNDER DIESEL-ELECTRIC MODEL 4 MOBILE HARBOR CRANES

A FLEXIBLE ALL-ROUNDER DIESEL-ELECTRIC MODEL 4 MOBILE HARBOR CRANES A FLEXIBLE ALL-ROUNDER DIESEL-ELECTRIC MODEL 4 MOBILE HARBOR CRANES 2 Gottwald Mobile Harbor Cranes Gottwald Mobile Harbor Cranes 3 MODEL 4 MOBILE HARBOR CRANES AS VERSATILE AS IT IS COMPACT Gottwald Model

More information

ALL TERRAIN CRANE GA-1000N

ALL TERRAIN CRANE GA-1000N ALL TERRAIN CRANE GA GA-N JAPANESE SPECIFICATIONS CARRIER MODEL FAUN RTF11-4 SPEC. NO. GA-N-1-912 Control No. JA-2 35 GA-N-1-912 GA-N CRANE SPECIFICATIONS CRANE CAPACITY 12.2m Boom,kg at 2.8m (13part-line)

More information

PSC 8629 HYDRAULIC SERVICE CRANE SUPERIOR LIFTING SYSTEM LIFETIME EXCELLENCE. DISCLOSURE: Image does not show the standard shipping package.

PSC 8629 HYDRAULIC SERVICE CRANE SUPERIOR LIFTING SYSTEM LIFETIME EXCELLENCE. DISCLOSURE: Image does not show the standard shipping package. PSC 8629 HYDRAULIC SERVICE CRANE LIFETIME EXCELLENCE SUPERIOR LIFTING SYSTEM DISCLOSURE: Image does not show the standard shipping package. STANDARD FEATURES WINCH Planetary winch for speed and durability.

More information

32117R TECHNICAL SPECIFICATIONS 32117R SIDE VIEW DIAGRAM. Maximum Vertical Reach. Powered Boom Sections 5 Overall Height

32117R TECHNICAL SPECIFICATIONS 32117R SIDE VIEW DIAGRAM. Maximum Vertical Reach. Powered Boom Sections 5 Overall Height 32117R 32117R SIDE VIEW DIAGRAM Maximum Vertical Reach 153'/46,6 m Working Area 180 Degrees Standard (360 Optional) Lifting Capacity 64,000 lbs/29 030 kg Boom Length 117 /35,6 m Crane Weight (Standard)

More information

AC23-95 FOR NEW EQUIPMENT SALES, CALL TELESCOPIC CRANE. TO SPEAK WITH AN ALTEC REPRESENTATIVE or visit us online at altec.

AC23-95 FOR NEW EQUIPMENT SALES, CALL TELESCOPIC CRANE. TO SPEAK WITH AN ALTEC REPRESENTATIVE or visit us online at altec. AC23-95 FOR NEW EQUIPMENT SALES, CALL 866.966.2969 TO SPEAK WITH AN ALTEC REPRESENTATIVE or visit us online at altec.com TELESCOPIC CRANE AC23-95 STANDARD FEATURES Altec LMAP (Load Moment & Area Protection)

More information

26105F TECHNICAL SPECIFICATIONS 26105F SIDE VIEW DIAGRAM. Maximum Vertical Reach. Powered Boom Sections 4 Overall Height

26105F TECHNICAL SPECIFICATIONS 26105F SIDE VIEW DIAGRAM. Maximum Vertical Reach. Powered Boom Sections 4 Overall Height 26105F 26105F SIDE VIEW DIAGRAM Maximum Vertical Reach 162'/49,4 m Working Area 180 Degrees Standard (360 Optional) Lifting Capacity 52,000 lbs/23 587 kg Boom Length 105 /32 m Crane Weight (Dry) 26,040

More information

TECHNICAL SPECIFICATIONS

TECHNICAL SPECIFICATIONS 45127 45127 SIDE VIEW DIAGRAM Maximum Vertical Reach Working Area Lifting Capacity Boom Length Crane Weight (Standard) Jib Lengths Winch Bare Drum Pull 192'/58,5 m 360 Degrees 90,000 lbs/40 823 kg 127

More information

PSC 4025 ELECTRIC HYDRAULIC SERVICE CRANE SUPERIOR LIFTING SYSTEM LIFETIME EXCELLENCE. DISCLOSURE: Image does not show the standard shipping package.

PSC 4025 ELECTRIC HYDRAULIC SERVICE CRANE SUPERIOR LIFTING SYSTEM LIFETIME EXCELLENCE. DISCLOSURE: Image does not show the standard shipping package. PSC 4025 ELECTRIC HYDRAULIC SERVICE CRANE LIFETIME EXCELLENCE SUPERIOR LIFTING SYSTEM DISCLOSURE: Image does not show the standard shipping package. STANDARD FEATURES WINCH Planetary winch for speed and

More information

Fully Hydraulic Crawler Crane. Lifting Capacity 280 metric tons

Fully Hydraulic Crawler Crane. Lifting Capacity 280 metric tons Fully Hydraulic Crawler Crane Lifting Capacity 80 metric tons CCH800 General Dimensions (with basic boom) (Unit : mm) Specifications Performance Swing speed.7rpm Travel speed 0.9/0.5 km/hr Gradeability

More information

STC300S STC300S TRUCK CRANE 30 TONS LIFTING CAPACITY. Quality Changes the World

STC300S STC300S TRUCK CRANE 30 TONS LIFTING CAPACITY. Quality Changes the World STC300S STC300S TRUCK CRANE 30 TONS LIFTING CAPACITY 2 COMPANY BRIFE INTRODUCTION COMPANY BRIFE INTRODUCTION 3 SANY Automobile Hoisting Machinery is one of the core business unit of Sany Heavy Industry,

More information

Mobile Harbour Crane LHM 120

Mobile Harbour Crane LHM 120 Mobile Harbour Crane LHM 120 Main dimensions Bulk operation Load diagram 50 Capacity (t) 42 40 30 24 20 on the ropes motor grab 10 4-rope grab 0 0 5 10 15 20 25 30 35 Outreach (m) Boom fulcrum 10.1 m 19.6

More information