GT-550E-2. Hydraulic Truck Crane. Crane Capacity 55,000 kg at 3.0 m

Transcription

1 GT-550E-2 Crane Capacity 55,000 kg at 3.0 m Euro-3 Hydraulic Truck Crane DIMENSIONS - Over all length:13,480mm - Over all width: 2,820mm - Over all height: 3,680mm MASS Gross Vehicle mass:41,500kg - Front:16,800kg - Rear :24,700kg PERFORMANCE Max. traveling speed:75km/h Gradeability(tanθ):58% Min. Turning radius:11.3m(at center of extreme outer tire) - 1 -

2 CRANE CAPACITY 55,000kg at 3.0m BOOM FULLY RETRACTED LENGTH FULLY EXTENDED LENGTH EXTENSION SPEED ELEVATION SPEED JIB LENGTH HOIST MAIN WINCH SINGLE LINE PULL SINGLE LINE SPEED WIRE ROPE HOIST AUXILIARY WINCH SINGLE LINE PULL SINGLE LINE SPEED WIRE ROPE SWING REAR SWING RADIUS HYDRAULIC SYSTEM CRANE CONTROL CAB 5-section full length power telescoping boom 11.1m 42.0m 30.9m in 132s -2º to +80ºin 72s Two-staged swing around boom extension. Triple offset (5 º/25 º/45 º) type. Stored alongside base boom section. Assistant cylinders for mounting and stowing. Single sheave at jib head. 8.8m and 15.2m Variable speed with grooved drum driven by hydraulic axle piston motor through speed reducer. 42.2KN(4,300kgf) 143m/min(at the 4th layer) Spin-resistant type,19.05mm 227m Variable speed with grooved drum driven by hydraulic axle piston motor through speed reducer. 44.1KN(4,500kgf) 123m/min(at the 2nd layer) Spin-resistant type,19.05mm 127m 1.6 min-1(rpm) 3.65m Pumps----- Two variable piston pumps for telescoping, elevating and winches. Tandem gear pump for swing and optional equipment. Control valves-----multiple valves actuated by pilot pressure integral pressure relieve valve. Circuit----equipped with air cooled type oil cooler. Hydraulic oil tank capacity approx.690l Filters-----return line filter By 4 control levers based on ISO standard layout. Control lever stands can change neutral positions and tilt for easy access to cab. One sided one-man type, steel construction with sliding door access and tinted safety glass windows opening at side

3 Operator's 3 way adjustable seat with headrest TADANO AUTOMATIC MOMENT LIMITER SAFETY DEVICES OUTRIGGER EXTENDED WIDTH and armrest. Main unit in crane cab gives audible and visual warning of approach to overload. Automatically cuts out crane motions before overload. Digital liquid crystal display: Either boom angle or moment% Either boom length or potential hook height Actual load radius or swing angle Actual hook load Permissible load Either jib offset angle or number of parts line of rope Outrigger position indicator Bar graphical display: Either moment as percentage or main hydraulic pressure. Boom position indicator Boom angle indicator Pendant type over-winding cutout Winch automatic fail-safe brake Hook safety latch Pilot check valves Holding valves Counterbalance valves Hydraulic pressure relief valves Front jack overload alarm Hydraulic operated H-type outriggers. Each outrigger controlled simultaneously or independently from either side of carrier. Equipped with level gauge. Float mounted integrally with the jack retractor to within vehicle width. All cylinders are fitted with pilot check valves. Crane operation with different extended length of each outrigger. Equipped with extension width detector for each outrigger. Fully6.8m, middle4.6m, minimum2.39m Float size(diameter) mm - 3 -

4 FRONT JACK STANDARD EQUIPMENT (UPPER STRUCTURE) A fifth hydraulically operated outrigger jack. Mounted to the front frame of carrier to permit 360 º lifting capacities. Hydraulic cylinder fitted with pilot check valve. Float size(diameter) mm 4.5 t capacity hook block (swivel hook) 20t capacity hook block 55t capacity hook block Control pedals for boom hoist and boom telescoping. 3 working lights External lamp (AML) Cable follower Winch drum mirror (Hoist mirror) Electric fan Sun visor Sun shade Cab floor mat Air conditioner - 4 -

5 MANUFACTURER ENGINE (Euro 3) CLUTCH TRANSMISSION AXLES CARRIER SPECIFICATIONS JINGCHENG HEAVY INDUSTRY CO.,LTD., BCW5431JQZ,left hand steering, 8 4 Manufacturer---- Daimler Model---OM457LA.Ⅲ/7 Type cycle, turbo charged,6 cylinder in line, direct injection, water cooled diesel engine. Piston displacement---11,967cm 3 Max. output kw(354ps)/1,900r/min Max. torque----1,850n.m(190kgf.m)/1,100r/ min Dry single plate, hydraulically operated clutch release mechanism with air assisted booster. 9 forward an 1 reverse speeds, synchromesh on 2nd 9th gear and constant-mesh on 1st and reverse gear. Front------Reverse-ellliot type, steering axle. Rear Full floating type, driving axle with inter-wheel differential lock. STEERING Dual circuit hydraulic and mechanical steering of both front axles with hydraulic power booster. SUSPENSION BRAKE SYSTEM ELECTRIC SYSTEM FUEL TANK CAPACITY Front Hydraulic/pneumatic suspension, with hydraulic lock system and leveling adjustment. Rear Hydraulic/pneumatic suspension, with hydraulic lock system and leveling adjustment. Service-----Full air brakes on all wheels. Dual-circuit system. Parking/Emergency Spring laded brake on rear 4-wheel controlled by knob of spring brake valve. Auxiliary----Constant throttle system with exhaust flap brake. 24 V DC. 2 batteries of 12V Alternator V 80A 300L - 5 -

6 CAB 2-man full width cab of steel structure, with safety glass. Seats adjustable and air-suspended with headrest and 3point safety belt. TIRE - Front 315/80 R22.5 single x4 - Rear 315/80 R22.5 double x4 - Spare 315/80 R22.5 x1 TURN RADIUS STANDARD EQUIPMENT Min. turning radius (at center of extreme outer tire) m Spare tire carrier Rear fog lights Inter-wheel differential gear lock Fuel tank cap with lock key Air dryer Towing hook (Front and rear, Eye type) Engine over-run alarm Air filter warning light (Instrument cluster) Cooling water level warning light Engine hour meter PTO hour meter Reversing signal Low air pressure warning lamp and buzzer Adjustment and heating rearview mirror Sun visor Tilting-telescoping steering wheel 3 way adjustable air suspension seat Tachometer/speedometer(with odometer) Air conditioner(hot water cab heater and cooler)with defroster 3 point type seat belt. Windshield wiper (with intermittent wiping) and washer Cigarette lighter Owner's tool set Cruise control AM/FM radio - 6 -

7 Telescoping modeⅠ NOTE: The above lifting height and boom angle are based on a straight (unladen) boom, and allowance should be made for boom deflection obtained under laden conditions

8 Telescoping modeⅡ NOTE: The above lifting height and boom angle are based on a straight (unladen) boom, and allowance should be made for boom deflection obtained under laden conditions

9 unit:kg class:c3 Outrigger max extended6.8m Working 11.1m 15.0m 38.1m 42.0m 18.8m boom 26.6m boom 34.3m boom radius boom boom boom boom ,000 40,000 28,000 20, ,700 40,000 28,000 20, ,500 38,100 28,000 20, ,200 33,800 28,000 19,800 20,000 14, ,800 30,400 28,000 19,000 20,000 14, ,800 27,400 27,200 18,200 20,000 13, ,400 25,000 24,700 17,500 20,000 12,800 14,000 8, ,200 22,800 22,500 16,800 18,900 12,000 14,000 8, ,400 21,000 20,700 16,200 17,800 11,400 13,500 8,000 8,000 8, ,700 19,300 19,100 15,700 16,700 10,800 13,000 8,000 8,000 8, ,300 17,900 17,600 15,200 15,800 10,200 12,500 8,000 8,000 8, ,200 14,600 14,200 14,300 14,200 9,300 11,300 7,600 8,000 8, ,600 11,300 13,500 12,500 8,500 10,400 7,000 7,500 8, ,500 9,100 11,400 10,300 7,800 9,600 6,400 6,900 7, ,800 7,500 9,600 8,600 7,200 8,800 5,800 6,400 6, ,100 7,200 6,200 6,200 6,800 4,900 5,500 5, ,500 5,500 4,500 5,400 5,100 4,200 4,700 5, ,300 4,700 3,900 3,600 4,100 4, ,400 3,700 3,000 3,200 3,600 3, ,700 3,000 2,200 2,800 2,800 2, ,200 2,400 1,600 2,500 2,200 1, ,200 2,100 1,800 1, ,700 1,400 1, ,400 1, , Telescoping condition(%) Telescoping mode Ⅰ,Ⅱ Ⅰ Ⅰ Ⅱ Ⅰ Ⅱ Ⅰ Ⅱ Ⅱ Ⅰ,Ⅱ 2nd boom rd boom th boom Top boom NOTE 1. Rated lifting capacities shown in the table are based on the condition that the crane is set on firm groundhorizontally. Those above bold line are based on crane strength and those below, it is stability. 2. Rated lifting capacities in the stability area comply with part 2 /ISO The mass of load handling devices such as hook blocks {570 kg for 55 ton capacity, 400 kg for 20 ton capacity and 130 kg for 4.5 ton capacity} and slings, shall be considered part of the load and must be deducted from rated lifting capacities. 4. Without front jack extended, when the boom is within the Over-front, Rated lifting capacities are different from those for the boom in the Over-side and Over-rear. 5. Standard number of parts of line for each boom length is as shown below. Load per-line should not surpass42.2 kn {4,300 kgf} for main winch rope and 44.1 kn {4,500 kgf} for auxiliary winch rope. Boom length(m) Jib/Single top No. of Parts line **13/ **:With single top (When the lifting capacity is 55,000 kg) 6. Special weather caution: Refer to the operation and maintenance manual. 7. For rated lifting capacity of single top, subtract the main hook mass from the relevant boom rated lifting capacity. Rated lifting capacity of single top should not exceed 4,500 kg

10 unit:kg Class :C3 Working radius 11.1m boom 15.0m boom ,000 28,000 28,000 20, ,000 28,000 28,000 20, ,000 28,000 28,000 20,000 Outrigger middle extended 4.6m 18.8m boom 26.6m boom 34.3m boom ,300 25,500 24,900 19,700 20,000 14, ,200 19,200 18,700 18,900 20,000 14, ,800 15,100 14,600 17,700 16,400 13, ,800 12,200 11,800 14,600 13,300 12,700 14,000 8, ,600 10,000 9,600 12,300 11,100 12,000 11,900 8, m boom 42.0m boom 7.0 8,900 8,300 8,000 10,500 9,400 11,100 10,100 8,000 8,000 8, ,500 7,000 6,600 9,100 8,000 9,700 8,700 8,000 8,000 8, ,400 5,900 5,500 7,900 6,800 8,500 7,500 8,000 8,000 7, ,700 4,200 3,900 6,100 5,100 6,700 5,800 7,100 6,500 6, ,000 2,700 4,800 3,800 5,300 4,500 5,600 5,200 4, ,100 1,800 3,800 2,900 4,300 3,500 4,600 4,200 3, ,300 1,000 3,000 2,100 3,500 2,700 3,800 3,400 3, ,900 1,000 2,300 1,600 2,600 2,200 1, ,100 1,500 1,800 1,400 1, ,200 Telescoping mode Telescoping condition(%) Ⅰ,Ⅱ Ⅰ Ⅰ Ⅱ Ⅰ Ⅱ Ⅰ Ⅱ Ⅱ Ⅰ, Ⅱ 2nd boom rd boom th boom Top boom Working radius 11.1m boom Unit :kg Class :C3 Outrigger min. extended 2.39m 15.0m boom ,800 22,100 21,700 20, ,900 16,300 15,900 18, ,100 12,500 12,100 14, m boom 26.6m boom ,400 9,900 9,500 11,900 10,800 12, ,400 7,900 7,600 9,800 8,800 10, ,900 6,500 6,100 8,300 7,300 8, ,700 5,300 5,000 7,000 6,100 7, ,800 4,300 4,000 6,000 5,100 6, ,000 3,500 3,200 5,200 4,300 5, ,300 2,900 2,600 4,500 3,600 5, ,700 2,300 2,000 3,900 3,000 4, ,800 1,400 1,100 2,900 2,100 3, ,200 1,400 2, ,600 2, ,100 1,600 Telescoping condition(%) Telescoping mode Ⅰ, Ⅱ Ⅰ Ⅰ Ⅱ Ⅰ Ⅱ 2nd boom rd boom th boom Top boom

11 Outrigger max extended 6.8m Unit :kg Class:C3 42.0m Boom 8.8m Jib 15.2m Jib Boom angle 5 offset 25 offset 45 offset 5 orffset 25 offset 45 offset Outrigger max extended6.8m Unit:kg Class:C3 38.1m Boom (Telescoping modeⅡ) or less than that 8.8m Jib 15.2m Jib Boom angle 5 offset 25 offset 45 offset 5 offset 25 offset 45 offset Outrigger max extended 6.8m Unit:kg Class:C3 34.3m Boom (Telescoping modeⅠ)or less than that 8.8m Jib 15.2m Jib Boom angle 5 offset 25 offset 45 offset 5 offset 25 offset 45 offset

12 Outrigger extended 4.6m Unit:kg Class:C3 42.0m Boom 8.8m Jib 15.2m Jib Boom angle 5 offset 25 offset 45 offset 5 offset 25 offset 45 offset Outrigger extended 4.6m Unit:kg Class:C3 38.1m Boom (Telescoping modeⅡ)or less than that 8.8m Jib 15.2m Jib Boom angle 5 offset 25 offset 45 offset 5 offset 25 offset 45 offset Outrigger extended4.6m Unit:kg Class:C3 34.3m Boom (Telescoping modeⅠ)or less than that 8.8m Jib 15.2m Jib Boom angle 5 offset 25 offset 45 offset 5 offset 25 offset 45 offset

13 TADANO LTD.(International Division) 4-12, Kamezawa 2-chome, Sumida-ku Tokyo , Japan Tel: Fax: BQ.TADANO (BEIJING) CRANE CO., LTD. Add: No.36 Linhe Street, Linhe Industrial Development Zone, Shunyi District, Beijing Tel: (86 10) /18 Fax:(86 10) /58 P.C.: Website: NOTES: Due to constant development, the specifications above mentioned are subject to change without notice. 13