State of Minnesota PRICING PAGE - METHOD # 2 (Typed Responses Required)

Transcription

1 SEQ # Tractors: Skid Steers Attachments T-631(5) State of Minnesota PRICING PAGE - METHOD # 2 (Typed Responses Required) May, 2016 Price quote for: TRACTOR: SKID STEERS Vendor Name: NIEBUR TRACTOR & EQUIPMENT Contact Person: DAN BEISSEL Street Address: TH STREET EAST P.O. Box: City, State, Zip HASTINGS, MN Phone #: Toll Free #: Fax #: Address: d.beissel@nieburtractor.com PERCENTAGE DISCOUNT PRICING 1.0 MANUFACTURER 2.0 DATE AND ID. OF PRICE LIST 3.0 PERCENTAGE DISCOUNT FROM PRICE LIST 1-Apr % on base unit 4.0 PRICE FOR ADDITIONAL SERVICE MANUAL $ PRICE FOR ADDITIONAL PARTS MANUAL $ PRICE FOR ADDITIONAL OPERATIONS MANUAL $ EXTENDED WARRANTY OPTIONS Use this section to offer performance/warranty options, number these items starting with 9.1, 9.2, 9.3, etc. (Specify years, miles or hours extended term covers.) NEW EQUIPMENT RENTAL PROGRAM If rental programs are available on the new equipment offered, with the option to purchase, list the hourly/weekly/monthly rental rate. Indicate the percent of rental fee paid by the purchaser that will be applied to the purchase price. See Solicitation Special Terms & Conditions. Hourly Rental Rate: $ Weekly Rental Rate: $ Monthly Rental Rate: $ Percent (%) of Rental Fee applied to purchase price: % If the new rental equipment is purchased and finance charges are applicable for the actual rental term only, state the actual interest rate here: 7.0 VENDOR OWNED RENTAL RETURN OR DEMO EQUIPMENT PROGRAM See Solicitation Special Terms and Conditions. DEDUCT cost per Used Hour from the original Contract Price $ 8.0 DISCOUNT OFF FOR RELATED PARTS & ACCESSORIES 12% (See Special Terms and Conditions) Price List Date and Number 9.0 DELIVERY CHARGES - SEE SPECIAL TERMS AND CONDITIONS NO FLAT RATE ALLOWED Hastings, MN DELIVERY STARTING POINT - City, State, Zip PRICE PER LOADED MILE $2.50 MINIMUM DELIVERY CHARGE (if applicable) $ INSTALLATION - PER HOUR (Hourly Shop Rate): (Installation services may be requested on an "as needed" basis - see special terms and conditions.) $75.00

2 SKID STEER LOADERS WHOLEGOODS PRICE LIST EFFECTIVE APRIL 1, 2016 Please replace all pages of this section of the current price book. These pages are a complete revision of this section. All prices are effective as of April 1, /11/2016 Corrected Wholegoods number for bucket. See page Corrected parts number for block heater. See pages 17-9 and /19/2016 Added Counterweights and Hose Stay. See pages and /2/2016 Corrected Counterweight & Hardware Part Numbers Corrected Tire Option Part Numbers & Descriptions 4/1/2016 ISO-PILOT Control Models Added 4/7/2016 Distinguished Kits for H&F and Pilot Control Models 4/21/2016 Revised Tire Option Part Numbers & Descriptions. See pages and SKID STEER LOADERS Complete revision April 1, Page 18-1

3 This page intentionally left blank. Complete revision April 1, Page 18-2

4 SKID STEER LOADERS PAGE GROSS HP 18-5 SSV $41, SSV $47, Replacement Engines Complete revision April 1, Page 18-3

5 SKID STEER LOADERS This page intentionally left blank. Complete revision April 1, Page 18-4

6 SSV65 SSV65 Skid Steer Loader FEATURES BASIC UNITS (HAND & FOOT CONTROLS) Vertical Lift Path Loader Frame SSV65, Open ROPS/FOPS Cab, Mechanical Quick Coupler Standard Front Quick Coupler, Float Standard SSV65F, Open ROPS/FOPS Cab, High Flow Hydraulics Option Mechanical Quick Coupler One Way Self-Leveling with Kubota Shock-less Ride SSV65FR, Open ROPS/FOPS Cab, High Flow Hydraulics, (KSR) Option Self-Leveling with KSR, Mechanical Quick Coupler Loader Boom Lock SSV65H, Open ROPS/FOPS Open ROPS & Air Conditioned ROPS/FOPS Cab Models SSV65HF, Open ROPS/FOPS Cab, High Flow Hydraulics Adjustable, Vinyl, Suspension Seat 2" Retractable Seat Belt and 2-Piece Seat Bar SSV65HFR, Open ROPS/FOPS Cab, High Flow Hydraulics, 12V Electric Outlet Self-Leveling with KSR, 18 gpm Auxiliary Hydraulics, 28 gpm High Flow SSV65HR, Open ROS/FOPS Cab, Self-Leveling with KSR, Hydraulics Option with Multi-Function Controls and 14-pin coupler SSV65R, Open ROPS/FOPS Cab, Self-Leveling with KSR, Direct To Tank Return Line Mechanical Quick Coupler 10x16.5, 8PR Heavy-Duty Tires SSV65HC, AC Enclosed Cab, Two Speed Travel System SSV65HFC, AC Enclosed Cab, High Flow Hydraulics, Spring Applied Hydraulically Released (SAHR) Brakes Gear Drive Pumps & Variable Loader and High Flow SSV65HFRC, AC Enclosed Cab, High Flow Hydraulics, Pumps (if equipped) Self-Leveling with KSR, Mechanical Hand & Foot Controls SSV65HRC, AC Enclosed Cab, Self-Leveling with KSR, Electronic Dial Throttle Automatic Glow Plugs Key Switch Stop/Start System ISO-PILOT CONTROL UNITS Self-Bleed Fuel System SSV65P, Open ROPS/FOPS Cab, Mechanical Quick Coupler 2 Front and 2 Rear Working Lights SSV65PF, Open ROPS/FOPS Cab, High Flow Hydraulics 2 Front Corner Lights & 2 Rear Red Tail Lights Mechanical Quick Coupler Hour Meter, Engine Coolant Temperature and Fuel SSV65PFR, Open ROPS/FOPS Cab, High Flow Hydraulics, Gauges and Warning Lights Self-Leveling with KSR, Mechanical Quick Coupler Horn and Backup Alarm SSV65PH, Open ROPS/FOPS Lockable Fuel Cap Door Bolt On Grab Handles to enter machine SSV65PHF, Open ROPS/FOPS Cab, High Flow Hydraulics ENGINE SSV65PHFR, Open ROPS/FOPS Cab, High Flow Hydraulics, V2607 Kubota CR-TE4, Tier 4 Diesel Engine Self-Leveling with KSR, 4-Cylinder, 4 Cycle, Turbo Charged SSV65PHR, Open ROS/FOPS Cab, Self-Leveling with KSR, 64 Gross 2700 rpm 2.6 L Displacement SSV65PR, Open ROPS/FOPS Cab, Self-Leveling with KSR, 166 lbf-ft Peak Torque Mechanical Quick Coupler SSV65PHC, AC Enclosed Cab, SSV65PHFC, AC Enclosed Cab, High Flow Hydraulics, DIMENSIONS Cab Height 79.9" SSV65PHFRC, AC Enclosed Cab, High Flow Hydraulics, Width over wheels.66.5" Self-Leveling with KSR, Width with 68" standard bucket.69.0" SSV65PHRC, AC Enclosed Cab, Self-Leveling with KSR, Length without bucket " Length with standard bucket 135.4" OPERATIONAL DIMENSIONS Operating Weight*, SSV65*, Open ROPS/FOPS Cab, Mechanical Quick Coupler..6,790 lbs. Rated Operating Capacity 50% of Tipping Load.1,950 lbs. Tipping Load..3,900 lbs. Auxiliary Hydraulics Flow / 28.0 gpm Travel Speed (Low / High) 6.9 / 11.1 mph Maximum Height Height to Hinge Pin Ground Clearance ". Traction Force..7,339 lbf. * Includes operator s weight, 175 lbs. Complete revision April 1, Page 18-5

7 SSV65 HOW TO SELECT AN SSV65 Skid Steer Loader (Sample Order Information Page) Below are examples of a complete SSV65 order. To submit your order, please select the Basic Unit Model that you desire from Part 1. Then select the attachments from Parts 2, 3, & 4 needed to complete your order. STEP 1) STEP 2) Select from Part 1 the Basic Unit that fits your needs. For example, choose a SSV65 or SSV65H or SSV65HRC Select from Parts 2 and 3 the attachments necessary to make the unit a complete machine. Choose buckets, attachments, or accessories via parts. Parts items are available in Part 4. (SAMPLE ) STANDARD UNIT SSV65 COMPLETE AND PRICE BASIC UNIT: SSV65 SKID STEER LOADER BASIC UNIT 6290 $41, Open ROPS/FOPS Cab Mechanical Quick Coupler ATTACHMENTS: AP-SL68SLC 68" low profile standard floor bucket with 541 $1, bolt-on cutting edge AP-PFL " Pallet Forks, 4500 lbs Capacity (Single Piece) 460 $1, $43, STANDARD UNIT SSV65HRC COMPLETE AND PRICE BASIC UNIT: SSV65HRC SKID STEER LOADER BASIC UNIT 6555 $47, AC Enclosed Cab, Self-Leveling with KSR, ATTACHMENTS: AP-SL68SLT 68" low profile standard floor bucket with 541 $1, teeth AP-PFL " Pallet Forks, 4500 lbs Capacity (Single Piece) 448 $1, $49, Complete revision April 1, Page 18-6

8 SSV65 PART 1 MODEL SSV65 BASIC UNITS (HAND & FOOT CONTROLS) SSV65 SKID STEER LOADER BASIC UNIT 6290 $41, Open ROPS/FOPS Cab Mechanical Quick Coupler SSV65F SKID STEER LOADER BASIC UNIT 6290 $43, Open ROPS/FOPS Cab, High Flow Hydraulics, Mechanical Quick Coupler, Multi-Function Ctls & 14-pin coupler SSV65FR SKID STEER LOADER BASIC UNIT 6290 $44, Open ROPS/FOPS Cab, High Flow Hydraulics, Self-Leveling with KSR, Mechanical Quick Coupler, Multi-Function Ctls & 14-pin coupler SSV65H SKID STEER LOADER BASIC UNIT 6290 $42, Open ROPS/FOPS Cab SSV65HF SKID STEER LOADER BASIC UNIT 6290 $43, Open ROPS/FOPS Cab, High Flow Hydraulics,, Multi-Function Ctls & 14-pin coupler SSV65HFR SKID STEER LOADER BASIC UNIT 6290 $44, Open ROPS/FOPS Cab, High Flow Hydraulics, Self-Leveling with KSR,, Multi-Function Ctls & 14-pin coupler SSV65HR SKID STEER LOADER BASIC UNIT 6290 $43, Open ROPS/FOPS Cab, Self-Leveling with KSR, SSV65R SKID STEER LOADER BASIC UNIT 6290 $42, Open ROPS/FOPS Cab, Self-Leveling with KSR, Mechanical Quick Coupler SSV65HC SKID STEER LOADER BASIC UNIT 6555 $46, AC Enclosed Cab SSV65HFC SKID STEER LOADER BASIC UNIT 6555 $47, AC Enclosed Cab, High Flow Hydraulics,, Multi-Function Ctls & 14-pin coupler SSV65HFRC SKID STEER LOADER BASIC UNIT 6555 $48, AC Enclosed Cab, High Flow Hydraulics, Self-Leveing with KSR,, Multi-Function Ctls & 14-pin coupler SSV65HRC SKID STEER LOADER BASIC UNIT 6555 $47, AC Enclosed Cab, Self-Leveling with KSR, Complete revision April 1, Page 18-7

9 SSV65 PART 2 MODEL SSV65 ISO-PILOT CONTROL UNITS SSV65P SKID STEER LOADER ISO-PILOT CONTROLS UNIT 6290 $43, Open ROPS/FOPS Cab Mechanical Quick Coupler SSV65PF SKID STEER LOADER ISO-PILOT CONTROLS UNIT 6290 $45, Open ROPS/FOPS Cab, High Flow Hydraulics, Mechanical Quick Coupler, Multi-Function Ctls & 14-pin coupler SSV65PFR SKID STEER LOADER ISO-PILOT CONTROLS UNIT 6290 $46, Open ROPS/FOPS Cab, High Flow Hydraulics, Self-Leveling with KSR, Mechanical Quick Coupler, Multi-Function Ctls & 14-pin coupler SSV65PH SKID STEER LOADER ISO-PILOT CONTROLS UNIT 6290 $44, Open ROPS/FOPS Cab SSV65PHF SKID STEER LOADER ISO-PILOT CONTROLS UNIT 6290 $45, Open ROPS/FOPS Cab, High Flow Hydraulics,, Multi-Function Ctls & 14-pin coupler SSV65PHFR SKID STEER LOADER ISO-PILOT CONTROLS UNIT 6290 $47, Open ROPS/FOPS Cab, High Flow Hydraulics, Self-Leveling with KSR,, Multi-Function Ctls & 14-pin coupler SSV65PHR SKID STEER LOADER ISO-PILOT CONTROLS UNIT 6290 $45, Open ROPS/FOPS Cab, Self-Leveling with KSR, SSV65PR SKID STEER LOADER ISO-PILOT CONTROLS UNIT 6290 $45, Open ROPS/FOPS Cab, Self-Leveling with KSR, Mechanical Quick Coupler SSV65PHC SKID STEER LOADER ISO-PILOT CONTROLS UNIT 6555 $48, AC Enclosed Cab SSV65PHFC SKID STEER LOADER ISO-PILOT CONTROLS UNIT 6555 $49, AC Enclosed Cab, High Flow Hydraulics,, Multi-Function Ctls & 14-pin coupler SSV65PHFRC SKID STEER LOADER ISO-PILOT CONTROLS UNIT 6555 $51, AC Enclosed Cab, High Flow Hydraulics, Self-Leveing with KSR,, Multi-Function Ctls & 14-pin coupler SSV65PHRC SKID STEER LOADER ISO-PILOT CONTROLS UNIT 6555 $49, AC Enclosed Cab, Self-Leveling with KSR, PART 3 BUCKETS QUICK ATTACH BUCKETS (standard duty) AP-SL68SLT 68 Low Profile, Standard Floor, Teeth, Side 485 $1, Cutter, 14.5 cu-ft heaped capacity AP-SL68SLC 68 Low Profile, Standard Floor, Bolt-On Cutting Edge, 538 $1, Side Cutter, 14.5 cu-ft heaped capacity AP-SL68SLLT 68 Low Profile, Long Floor, Teeth, Side Cutter 520 $1, cu-ft heaped capacity AP-SL68SLLC 68 Low Profile, Long Floor, Bolt-On Cutting Edge, Side 572 $1, Cutter, 18.0 cu-ft heaped capacity AP-SL74SLT 74 Low Profile, Standard Floor, Teeth, Side 516 $1, Cutter, 15.8 cu-ft heaped capacity Complete revision April 1, Page 18-8

10 SSV65 PART 3 QUICK ATTACH BUCKETS (standard duty) continued AP-SL74SLC 74 Low Profile, Standard Floor, Bolt-On Cutting Edge, 571 $1, Side Cutter, 15.8 cu-ft heaped capacity AP-SL74SLLT 74 Low Profile, Long Floor, Teeth, Side Cutter 552 $1, cu-ft heaped capacity AP-SL74SLLC 74 Low Profile, Long Floor, Bolt-On Cutting Edge, Side 607 $1, Cutter, 19.7 cu-ft heaped capacity QUICK ATTACH BUCKETS (heavy duty) AP-HD68LT 68 Heavy Duty, Low Profile, Standard Floor, Teeth, Side 545 $1, Cutter, 14.2 cu-ft heaped capacity AP-HD68LC 68 Heavy Duty, Low Profile, Standard Floor, Cutting Edge, 598 $1, Side Cutter, 14.2 cu-ft heaped capacity AP-HD68LLT 68 Heavy Duty, Low Profile, Long Floor, Teeth, 588 $1, Side Cutter, 17.9 cu-ft heaped capacity AP-HD68LLC 68 Heavy Duty, Low Profile, Long Floor, Cutting Edge, Side 641 $1, Cutter, 17.9 cu-ft heaped capacity AP-HD74LT 74 Heavy Duty, Low Profile, Standard Floor, Teeth, Side 581 $1, Cutter, 15.4 cu-ft heaped capacity AP-HD74LC 74 Heavy Duty, Low Profile, Standard Floor, Cutting Edge, 636 $1, Side Cutter, 15.4 cu-ft heaped capacity AP-HD74LLT 74 Heavy Duty Low Profile, Long Floor, Teeth, Side Cutter 626 $1, cu-ft heaped capacity AP-HD74LLC 74 Heavy Duty, Low Profile, Long Floor, Cutting Edge, Side 680 $1, Cutter, 19.2 cu-ft heaped capacity PART 4 Refer to Service Parts for replacment side cutters, cutting edges, and teeth on AP Buckets ACCESSORIES K9926 RETRACTABLE SEAT BELT OPTION (3 WIDE) 3 $82.00 As required in some states for OSHA compliance. S pin to 14-pin Adapter Harness 1 $ Allows a user to control an attachment with a 14-pin electrical connector that does not use the Kubota pin-out configuration. S pin to 14-pin Adapter Harness 1 $ Allows a user to control an attachment with an 8-pin Deutsch electrical connector. SL6660 Replacement Open ROPS /SSV $7, SL6661 Replacement Closed Cab/SSV $10, SEE REPLACEMENT CAB & ROPS ADOPTION LIST PART 5 REPLACEMENT CAB/ROPS FOR SSV65 Complete package that is direct-fit to the main frame mounting points. Hydraulic hoses ready to fit into main manifold. Includes new "bolt-on" style grab handles. Lift-Assist gas struts are not included. ACCESSORIES Available from Parts V Conversion Kit $ V Self-Leveling $ V Ride Control (KSR) $ Complete revision April 1, Page 18-9

11 SSV65 V Hazard lamp $ (Requires V Multi-Function Handle Kit for use) V Door Lock Key $40.00 V Pin Coupler $ V Multi-Function Handle Kit $ Required with 14 Pin Coupler Wiring Harness, Airsus $ Air Ride Seat, requires Airsus Wiring Harness $ V x16.5 Tire Assy (L,8PR) Over the Tire Width = 66.5" $ V x16.5 Tire Assy (R,8PR) Over the Tire Width = 66.5" $ V x16.5 Tire Assy (L, 10PR) Over the Tire Width = 71.8" $ V x16.5 Tire Assy (R, 10PR) Over the Tire Width = 71.8" $ V x6x10 Brawler Tire Assy (L) Replaces Equivalent To $ Size 10x16.5 with Over the Tire Width = 67.9" V x6x10 Brawler Tire Assy (R) Replaces Equivalent To $ Size 10x16.5 with Over the Tire Width = 67.9" V x6x11 Brawler Tire Assy (L) Replaces Equivalent To $ Size 12x16.5 with Over the Tire Width = 69.9" V x6x11 Brawler Tire Assy (R) Replaces Equivalent To $ Size 12x16.5 with Over the Tire Width = 69.9" V x16.5 Turf Tire with non-aggressive tread $ Over the Tire Width = 73.5" PART 5 OTHER ACCESSORIES - (Refer to PARTS for Pricing) Engine Block Heater Radio AM / FM / WB / MP Radio AM / FM / WB / Bluetooth Counterweight (order 4) with the following hardware Bolt, M16-1x75mm (order 4) Washer, Lock (order 4) RD Washer (order 4) Hose Stay Complete revision April 1, Page 18-10

12 SSV65 REPLACEMENT CAB & ROPS ADOPTION LIST SSV65 REPLACEMENT CAB & ROPS ADOPTION LIST Model Cab or ROPS WG # Add Items Discard Items SSV65HC Cab SL6661 none none SSF65HFC Cab SL6661 1,2,3,4 7,8,9 SSV65HFRC Cab SL6661 1,2,3,4,5 7,8,9,10 SSV65HRC Cab SL SSV65 ROPS SL6660 none none SSV65F ROPS SL6660 1,2,3,4 7,8,9 SSV65FR ROPS SL6660 1,2,3,4,5 7,8,9,10 SSV65H ROPS SL SSV65HF ROPS SL6660 1,2,3,4,6 7,8,9,10 SSV65HFR ROPS SL6660 1,2,3,4,5,6 7,8,9,10 SSV65HR ROPS SL6660 5,6 10 SSV65R ROPS SL Order Additional Items from Service Parts Item # Part # Part Name Qty 1 V Switch (HI FLOW) 1 2 V Label (OPERATION LH MULTI) 1 3 V Label (OPERATION RH MULTI) 1 4 V Label (HIGH FLOW) 1 5 V Switch (SELF LEVEL) 1 6 V Switch (HITCH) 1 Discard Items Item # Part # Part Name Qty 7 V Switch (AUX) 1 8 V Label (OPERATION LH) 1 9 V Label (OPERATION RH) 1 10 RD Cap, SWITCH 2 *Order only 1 for SSV65H Complete revision April 1, Page 18-11

13 SSV75 SSV75 Skid Steer Loader FEATURES BASIC UNITS (HAND & FOOT CONTROLS) Vertical Lift Path Loader Frame SSV75, Open ROPS/FOPS Cab, Mechanical Quick Coupler Standard Front Quick Coupler, Float Standard SSV75F, Open ROPS/FOPS Cab, High Flow Hydraulics Option Mechanical Quick Coupler One Way Self-Leveling with Kubota Shock-less Ride SSV75FR, Open ROPS/FOPS Cab, High Flow Hydraulics, (KSR) Option Self-Leveling with KSR, Mechanical Quick Coupler Loader Boom Lock SSV75H, Open ROPS/FOPS Open ROPS & Air Conditioned ROPS/FOPS Cab Models SSV75HF, Open ROPS/FOPS Cab, High Flow Hydraulics Adjustable, Vinyl, Suspension Seat 2" Retractable Seat Belt and 2-Piece Seat Bar SSV75HFR, Open ROPS/FOPS Cab, High Flow Hydraulics, 12V Electric Outlet Self-Leveling with KSR, 20.9 gpm Auxiliary Hydraulics, 30,4 gpm High Flow SSV75HR, Open ROS/FOPS Cab, Self-Leveling with KSR, Hydraulics Option with Multi-Function Controls and 14-pin coupler SSV75R, Open ROPS/FOPS Cab, Self-Leveling with KSR, Direct To Tank Return Line Mechanical Quick Coupler 12x16.5, 10PR Heavy-Duty Tires SSV75HC, AC Enclosed Cab, Two Speed Travel System SSV75HFC, AC Enclosed Cab, High Flow Hydraulics, Spring Applied Hydraulically Released (SAHR) Brakes Gear Drive Pumps & Variable Loader and High Flow SSV75HFRC, AC Enclosed Cab, High Flow Hydraulics, Pumps (if equipped) Self-Leveling with KSR, Mechanical Hand & Foot Controls SSV75HRC, AC Enclosed Cab, Self-Leveling with KSR, Electronic Dial Throttle Automatic Glow Plugs Key Switch Stop/Start System ISO-PILOT CONTROL UNITS Self-Bleed Fuel System SSV75P, Open ROPS/FOPS Cab, Mechanical Quick Coupler 2 Front and 2 Rear Working Lights SSV75PF, Open ROPS/FOPS Cab, High Flow Hydraulics 2 Front Corner Lights & 2 Rear Red Tail Lights Mechanical Quick Coupler Hour Meter, Engine Coolant Temperature and Fuel SSV75PFR, Open ROPS/FOPS Cab, High Flow Hydraulics, Gauges and Warning Lights Self-Leveling with KSR, Mechanical Quick Coupler Horn and Backup Alarm SSV75PH, Open ROPS/FOPS Lockable Fuel Cap Door Bolt On Grab Handles to enter machine SSV75PHF, Open ROPS/FOPS Cab, High Flow Hydraulics ENGINE SSV75PHFR, Open ROPS/FOPS Cab, High Flow Hydraulics, V3307 Kubota CR-TE4, Tier 4 Diesel Engine Self-Leveling with KSR, 4-Cylinder, 4 Cycle, Turbo Charged SSV75PHR, Open ROS/FOPS Cab, Self-Leveling with KSR, 74.3 Gross 2600 rpm 3.3 L Displacement SSV75PR, Open ROPS/FOPS Cab, Self-Leveling with KSR, 196 lbf-ft Peak Torque Mechanical Quick Coupler SSV75PHC, AC Enclosed Cab, SSV75PHFC, AC Enclosed Cab, High Flow Hydraulics, DIMENSIONS Cab Height..81.3" SSV75PHFRC, AC Enclosed Cab, High Flow Hydraulics, Width over wheels..71.8" Self-Leveling with KSR, Width with standard bucket.75.0" SSV75PHRC, AC Enclosed Cab, Self-Leveling with KSR, Length without bucket.115.0" Length with 74" standard bucket " OPERATIONAL DIMENSIONS Operating Weight*, SSV75*, Open ROPS/FOPS Cab, Mechanical Quick Coupler..8,157 lbs. Rated Operating Capacity 50% of Tipping Load 2,690 lbs. Tipping Load.....5,380 lbs. Auxiliary Hydraulics Flow / 30.4 gpm Travel Speed (Low / High) / 11.8 mph Maximum Height Height to Hinge Pin Ground Clearance ". Traction Force..8,494 lbf. * Includes operator s weight, 175 lbs. Complete revision April 1, Page 18-12

14 SSV75 HOW TO SELECT AN SSV75 Skid Steer Loader (Sample Order Information Page) Below are examples of a complete SSV75 order. To submit your order, please select the Basic Unit Model that you desire from Part 1. Then select the attachments from Parts 2 and 3 needed to complete your order. STEP 1) STEP 2) Select from Part 1 the Basic Unit that fits your needs. For example, choose a SSV75 or SSV75H or SSV75HRC Select from Parts 2 and 3 the attachments necessary to make the unit a complete machine. Choose buckets, attachments, or accessories via parts. Parts items are available in Part 4. (SAMPLE ) STANDARD UNIT SSV75 COMPLETE AND PRICE BASIC UNIT: SSV75 SKID STEER LOADER BASIC UNIT 7500 $47, Open ROPS/FOPS Cab Mechanical Quick Coupler ATTACHMENTS: AP-SL74SLC 74" low profile standard floor bucket with 541 $1, bolt-on cutting edge AP-PFL " Pallet Forks, 4500 lbs Capacity (Single Piece) 460 $1, $50, STANDARD UNIT SSV75HRC COMPLETE AND PRICE BASIC UNIT: SSV75HRC SKID STEER LOADER BASIC UNIT 7750 $53, AC Enclosed Cab, Self-Leveling with KSR, ATTACHMENTS: AP-SL74SLT 74" low profile standard floor bucket with 541 $1, teeth AP-PFL " Pallet Forks, 4500 lbs Capacity (Single Piece) 460 $1, $56, Complete revision April 1, Page 18-13

15 SSV75 PART 1 MODEL SSV75 BASIC UNITS (HAND & FOOT CONTROLS) SSV75 SKID STEER LOADER BASIC UNIT 7500 $47, Open ROPS/FOPS Cab Mechanical Quick Coupler SSV75F SKID STEER LOADER BASIC UNIT 7500 $49, Open ROPS/FOPS Cab, High Flow Hydraulics, Mechanical Quick Coupler, Multi-Function Ctls & 14-pin coupler SSV75FR SKID STEER LOADER BASIC UNIT 7500 $50, Open ROPS/FOPS Cab, High Flow Hydraulics, Self-Leveling with KSR, Mechanical Quick Coupler, Multi-Function Ctls & 14-pin coupler SSV75H SKID STEER LOADER BASIC UNIT 7500 $48, Open ROPS/FOPS Cab SSV75HF SKID STEER LOADER BASIC UNIT 7500 $49, Open ROPS/FOPS Cab, High Flow Hydraulics,, Multi-Function Ctls & 14-pin coupler SSV75HFR SKID STEER LOADER BASIC UNIT 7500 $51, Open ROPS/FOPS Cab, High Flow Hydraulics, Self-Leveling with KSR,, Multi-Function Ctls & 14-pin coupler SSV75HR SKID STEER LOADER BASIC UNIT 7500 $49, Open ROPS/FOPS Cab, Self-Leveling with KSR, SSV75R SKID STEER LOADER BASIC UNIT 7500 $48, Open ROPS/FOPS Cab, Self-Leveling with KSR, Mechanical Quick Coupler SSV75HC SKID STEER LOADER BASIC UNIT 7750 $52, AC Enclosed Cab SSV75HFC SKID STEER LOADER BASIC UNIT 7750 $54, AC Enclosed Cab, High Flow Hydraulics,, Multi-Function Ctls & 14-pin coupler SSV75HFRC SKID STEER LOADER BASIC UNIT 7750 $55, AC Enclosed Cab, High Flow Hydraulics, Self-Leveling with KSR,, Multi-Function Ctls & 14-pin coupler SSV75HRC SKID STEER LOADER BASIC UNIT 7750 $53, AC Enclosed Cab, Self-Leveling with KSR, Complete revision April 1, Page 18-14

16 SSV75 PART 2 MODEL SSV75 ISO-PILOT CONTROL UNITS SSV75P SKID STEER LOADER ISO-PILOT CONTROLS UNIT 7500 $50, Open ROPS/FOPS Cab Mechanical Quick Coupler SSV75PF SKID STEER LOADER ISO-PILOT CONTROLS UNIT 7500 $51, Open ROPS/FOPS Cab, High Flow Hydraulics, Mechanical Quick Coupler, Multi-Function Ctls & 14-pin coupler SSV75PFR SKID STEER LOADER ISO-PILOT CONTROLS UNIT 7500 $53, Open ROPS/FOPS Cab, High Flow Hydraulics, Self-Leveling with KSR, Mechanical Quick Coupler, Multi-Function Ctls & 14-pin coupler SSV75PH SKID STEER LOADER ISO-PILOT CONTROLS UNIT 7500 $50, Open ROPS/FOPS Cab SSV75PHF SKID STEER LOADER ISO-PILOT CONTROLS UNIT 7500 $52, Open ROPS/FOPS Cab, High Flow Hydraulics,, Multi-Function Ctls & 14-pin coupler SSV75PHFR SKID STEER LOADER ISO-PILOT CONTROLS UNIT 7500 $53, Open ROPS/FOPS Cab, High Flow Hydraulics, Self-Leveling with KSR,, Multi-Function Ctls & 14-pin coupler SSV75PHR SKID STEER LOADER ISO-PILOT CONTROLS UNIT 7500 $51, Open ROPS/FOPS Cab, Self-Leveling with KSR, SSV75PR SKID STEER LOADER ISO-PILOT CONTROLS UNIT 7500 $51, Open ROPS/FOPS Cab, Self-Leveling with KSR, Mechanical Quick Coupler SSV75PHC SKID STEER LOADER ISO-PILOT CONTROLS UNIT 7750 $54, AC Enclosed Cab SSV75PHFC SKID STEER LOADER ISO-PILOT CONTROLS UNIT 7750 $56, AC Enclosed Cab, High Flow Hydraulics,, Multi-Function Ctls & 14-pin coupler SSV75PHFRC SKID STEER LOADER ISO-PILOT CONTROLS UNIT 7750 $57, AC Enclosed Cab, High Flow Hydraulics, Self-Leveling with KSR,, Multi-Function Ctls & 14-pin coupler SSV75PHRC SKID STEER LOADER ISO-PILOT CONTROLS UNIT 7750 $55, AC Enclosed Cab, Self-Leveling with KSR, PART 3 BUCKETS QUICK ATTACH BUCKETS (standard duty) AP-SL74SLT 74 Low Profile, Standard Floor, Teeth, Side 516 $1, Cutter, 15.8 cu-ft heaped capacity AP-SL74SLC 74 Low Profile, Standard Floor, Bolt-On Cutting Edge, 571 $1, Side Cutter, 15.8 cu-ft heaped capacity AP-SL74SLLT 74 Low Profile, Long Floor, Teeth, Side Cutter 552 $1, cu-ft heaped capacity AP-SL74SLLC 74 Low Profile, Long Floor, Bolt-On Cutting Edge, Side 607 $1, Cutter, 19.7 cu-ft heaped capacity Complete revision April 1, Page 18-15

17 SSV75 PART 3 BUCKETS (Continued) QUICK ATTACH BUCKETS (heavy duty) AP-HD74LT 74 Heavy Duty, Low Profile, Standard Floor, Teeth, Side 581 $1, Cutter, 15.4 cu-ft heaped capacity AP-HD74LC 74 Heavy Duty, Low Profile, Standard Floor, Cutting Edge, 636 $1, Side Cutter, 15.4 cu-ft heaped capacity AP-HD74LLT 74 Heavy Duty Low Profile, Long Floor, Teeth, Side Cutter 626 $1, cu-ft heaped capacity AP-HD74LLC 74 Heavy Duty, Low Profile, Long Floor, Cutting Edge, Side 680 $1, Cutter, 19.2 cu-ft heaped capacity PART 4 Refer to Service Parts for replacment side cutters, cutting edges, and teeth on AP Buckets ACCESSORIES K9926 RETRACTABLE SEAT BELT OPTION (3 WIDE) 3 $82.00 As required in some states for OSHA compliance. S pin to 14-pin Adapter Harness 1 $ Allows a user to control an attachment with a 14-pin electrical connector that does not use the Kubota pin-out configuration. S pin to 14-pin Adapter Harness 1 $ Allows a user to control an attachment with an 8-pin Deutsch electrical connector. SL6660 REPLACEMENT OPEN ROPS /SSV $7, SL6661 REPLACEMENT CLOSED CAB/SSV $10, PART 5 REPLACEMENT CAB/ROPS FOR SSV65 Complete package that is direct-fit to the main frame mounting points. Hydraulic hoses ready to fit into main manifold. Includes new "bolt-on" style grab handles. Lift-Assist gas struts are not included. SEE REPLACEMENT CAB & ROPS ADOPTION LIST ACCESSORIES - (available from PARTS) V Conversion Kit $ V Self-Leveling $ V Ride Control (KSR) $ V Hazard lamp (for Hand & Foot Control Models Only) $ (Requires V Multi-Function Handle Kit for use) V Door Lock Key $40.00 V Pin Coupler $ V Multi-Function Lever Kit (for Hand & Foot Control Models Only) $ Required with 14 Pin Coupler Complete revision April 1, Page 18-16

18 SSV75 PART 5 (Cont.) ACCESSORIES - (available from PARTS) Wiring Harness, Airsus $ Air Ride Seat, requires Airsus Wiring Harness $ V x16.5 Tire Assy (L, 10PR) Over the Tire Width = 71.8" $ V x16.5 Tire Assy (R, 10PR) Over the Tire Width = 71.8" $ V x6x11 Brawler Tire Assy (L) Replaces Equivalent To $ Size 12x16.5 with Over the Tire Width = 69.9" V x6x11 Brawler Tire Assy (R) Replaces Equivalent To $ Size 12x16.5 with Over the Tire Width = 69.9" V x17.5 Tire Assy (L, 14PR) Over the Tire Width = 73.3" $ V x17.5 Tire Assy (R, 14PR) Over the Tire Width = 73.3" $ V x16.5 Turf Tire with non-aggressive tread $ Over the Tire Width = 73.5" PART 6 OTHER ACCESSORIES - (Refer to PARTS for Pricing) Engine Block Heater Radio AM / FM / WB / MP Radio AM / FM / WB / Bluetooth Counterweight (order 6 with the following hardware) RD Bolt, M16-1x110mm (order 4) Washer, Lock (order 4) RD Washer (order 4) Hose Stay Complete revision April 1, Page 18-17

19 SSV75 REPLACEMENT CAB & ROPS ADOPTION LIST SSV75 REPLACEMENT CAB & ROPS ADOPTION LIST Model Cab or ROPS WG # Add Items Discard Items SSV75HC Cab SL6661 none none SSF75HFC Cab SL6661 1,2,3,4 7,8,9 SSV75HFRC Cab SL6661 1,2,3,4,5 7,8,9,10 SSV75HRC Cab SL SSV75 ROPS SL6660 none none SSV75F ROPS SL6660 1,2,3,4 7,8,9 SSV75FR ROPS SL6660 1,2,3,4,5 7,8,9,10 SSV75H ROPS SL SSV75HF ROPS SL6660 1,2,3,4,6 7,8,9,10 SSV75HFR ROPS SL6660 1,2,3,4,5,6 7,8,9,10 SSV75HR ROPS SL6660 5,6 10 SSV75R ROPS SL Order Additional Items from Service Parts Item # Part # Part Name Qty 1 V Switch (HI FLOW) 1 2 V Label (OPERATION LH MULTI) 1 3 V Label (OPERATION RH MULTI) 1 4 V Label (HIGH FLOW) 1 5 V Switch (SELF LEVEL) 1 6 V Switch (HITCH) 1 Discard Items Item # Part # Part Name Qty 7 V Switch (AUX) 1 8 V Label (OPERATION LH) 1 9 V Label (OPERATION RH) 1 10 RD Cap, SWITCH 2 Complete revision April 1, Page 18-18

20 SKID STEER LOADERS REPLACEMENT ENGINES All replacement engines must be ordered through the Parts Department. See Parts Bulletin DPB R2 Complete revision April 1, Page 18-19

21 SEQ # Tractors: Skid Steers Attachments T-631(5) State of Minnesota PRICING PAGE - METHOD # 2 (Typed Responses Required) May, 2016 Price quote for: TRACTOR: COMPACT TRACK LOADERS Vendor Name: NIEBUR TRACTOR & EQUIPMENT Contact Person: DAN BEISSEL Street Address: TH STREET EAST P.O. Box: City, State, Zip HASTINGS, MN Phone #: Toll Free #: Fax #: Address: d.beissel@nieburtractor.com PERCENTAGE DISCOUNT PRICING 1.0 MANUFACTURER 2.0 DATE AND ID. OF PRICE LIST 3.0 PERCENTAGE DISCOUNT FROM PRICE LIST 1-Apr % on base unit 4.0 PRICE FOR ADDITIONAL SERVICE MANUAL $ PRICE FOR ADDITIONAL PARTS MANUAL $ PRICE FOR ADDITIONAL OPERATIONS MANUAL $ EXTENDED WARRANTY OPTIONS Use this section to offer performance/warranty options, number these items starting with 9.1, 9.2, 9.3, etc. (Specify years, miles or hours extended term covers.) NEW EQUIPMENT RENTAL PROGRAM If rental programs are available on the new equipment offered, with the option to purchase, list the hourly/weekly/monthly rental rate. Indicate the percent of rental fee paid by the purchaser that will be applied to the purchase price. See Solicitation Special Terms & Conditions. Hourly Rental Rate: $ Weekly Rental Rate: $ Monthly Rental Rate: $ Percent (%) of Rental Fee applied to purchase price: % If the new rental equipment is purchased and finance charges are applicable for the actual rental term only, state the actual interest rate here: 7.0 VENDOR OWNED RENTAL RETURN OR DEMO EQUIPMENT PROGRAM See Solicitation Special Terms and Conditions. DEDUCT cost per Used Hour from the original Contract Price $ 8.0 DISCOUNT OFF FOR RELATED PARTS & ACCESSORIES 12% (See Special Terms and Conditions) Price List Date and Number 9.0 DELIVERY CHARGES - SEE SPECIAL TERMS AND CONDITIONS NO FLAT RATE ALLOWED Hastings, MN DELIVERY STARTING POINT - City, State, Zip PRICE PER LOADED MILE $2.50 MINIMUM DELIVERY CHARGE (if applicable) $ INSTALLATION - PER HOUR (Hourly Shop Rate): (Installation services may be requested on an "as needed" basis - see special terms and conditions.) $75.00

22 COMPACT TRACK LOADERS WHOLEGOODS PRICE LIST EFFECTIVE MARCH 1, 2016 Please replace all pages of this section of the current price book. These pages are a complete revision of this section. All prices are effective as of March 1, Complete revision March 1, Page 17-1

23 COMPACT TRACK LOADERS This page intentionally left blank. Complete revision March 1, Page 17-2

24 COMPACT TRACK LOADERS PAGE GROSS HP 17-5 SVL SVL SVL95-2s Replacement Engines SUGGEST $55, $65, $71, Complete revision March 1, Page 17-3

25 COMPACT TRACK LOADERS This page intentionally left blank. Complete revision March 1, Page 17-4

26 SVL75-2 FEATURES SVL75-2 Compact Track Loader BASIC UNITS Vertical Lift Path Loader Frame SVL75-2, 12.6 Rubber Tracks, Open ROPS/FOPS Cab Standard Front Quick Coupler, Float Standard Mechanical Quick Coupler Option SVL75-2H, 12.6 Rubber Tracks, Open ROPS/FOPS Cab Loader Arm Self-Leveling Loader Boom Lock SVL75-2W, 15.0 Rubber Tracks, Open ROPS/FOPS Cab Open ROPS & Air Conditioned ROPS/FOPS Cab Models Mechanical Quick Coupler High Back, Adjustable, Vinyl, Suspension Seat SVL75-2HW, 15.0 Rubber Tracks, Open ROPS/FOPS 2" Retractable Seat Belt And 2-Piece Seat Bar Cab 12V Electric Outlet SVL75-2C, 12.6 Rubber Tracks, A/C ROPS/FOPS Cab 17.4 Gpm Auxiliary Hydraulics Mechanical Quick Coupler Direct To Tank Return Line SVL75-2HC, 12.6 Rubber Tracks, A/C ROPS/FOPS Cab Rigid Mounted Undercarriage, 4 Lower Track Rollers Rubber Tracks, 12.6 Standard, 15 Optional SVL75-2WC, 15.0 Rubber Tracks, A/C ROPS/FOPS Cab Two Speed Travel System Mechanical Quick Coupler Automatic Wet Disk Parking Brake SVL75-2HWC, 15.0 Rubber Tracks, A/C ROPS/FOPS Kubota 4 Hydraulic Pump Load Sensing System Cab 2 Gear, 2 Variable Displacement Pumps Hydraulic Joystick Controls ENGINE ISO Operating Pattern V3307 Kubota CR-TE4 Tier 4 Final Diesel Engine Hand And Foot Throttle Controls 4 Cylinder, 4 Cycle, Turbo Charged Electronic Travel Torque Management 74.3 Gross 2400 rpm (SAE J1995) Automatic Glow Plugs Key Switch Stop System DIMENSIONS Self Bleed Fuel System Cab Height Front And 2 Rear Working Lights Width (without attachment) Hour Meter, Engine Temperature And Fuel Width with wide track option (without Gauges And Warning Lights attachment) Horn And Backup Alarm Length (without attachment) Lockable Fuel Cap Length of Track on Ground Bolt On Grab Handles to enter machine OPERATIONAL DIMENSIONS Operating Weight*, SVL75-2H, 12.6 Rubber Tracks, Open ROPS/FOPS Cab, Mechanical Quick Coupler... 9,039 lbs. Rated Operating Capacity (@ 35% of Tipping Load)... 2,300 lbs. Rated Operating Capacity 35% of Tipping Load complies with ISO and SAE J 818 for crawler loaders Rated Operating Capacity 50% of Tipping Load... 3,285 lbs. Tipping Load... 6,570 lbs. Auxiliary Hydraulics Flow gpm Travel Speed (Low / High) / 7.1 mph Maximum Height Height to Hinge Pin Ground Pressure (Standard Track) psi. * Includes operator s weight, 175 lbs. Complete revision March 1, Page 17-5

27 SVL75-2 HOW TO SELECT AN SVL75-2 Compact Track Loader (Sample Order Information Page) Below are examples of a complete SVL75-2 order. To submit your order, please select the Basic Unit Model that you desire from Part 1. Then select the attachments from Parts 2 and 3 needed to complete your order. STEP 1) STEP 2) Select from Part 1 the Basic Unit that fits your needs. For example, choose a SVL75-2 and get: Base Model, rubber tracks, open ROPS/FOPS cab, and a mechanical quick coupler. Select from Parts 2 and 3 the attachments necessary to make the unit a complete machine. Choose buckets and bolt-on edges, accessories, or a hydraulic breaker. Parts items are available in Part 4. (SAMPLE ) STANDARD UNIT SVL75-2 COMPLETE AND PRICE BASIC UNIT: SVL75-2 COMPACT TRACK LOADER BASIC UNIT 9039 $55, Rubber Tracks Open ROPS/FOPS Cab Mechanical Quick Coupler ATTACHMENTS: AP-HD68LT 68 Heavy Duty, Low Profile, Standard Floor, Teeth, Side 541 $1, Cutter, 14.2 cu-ft heaped capacity AP-PFL " Pallet Forks, 4500 lbs Capacity (Single Piece) 460 $1, $58, STANDARD UNIT SVL75-2HWC COMPLETE AND PRICE BASIC UNIT: SVL75-2HWC COMPACT TRACK LOADER BASIC UNIT 9039 $64, Wide Rubber Tracks A/C ROPS/FOPS Cab ATTACHMENTS: S " 4 in 1 Bucket 910 $4, AP-PFL " Pallet Forks, 4500 lbs Capacity (Single Piece) 460 $1, $69, Complete revision March 1, Page 17-6

28 SVL75-2 PART 1 MODEL SVL75-2 BASIC UNITS SVL75-2 COMPACT TRACK LOADER BASIC UNIT 9039 $55, Rubber Tracks, Open ROPS/FOPS Cab Mechanical Quick Coupler SVL75-2H COMPACT TRACK LOADER BASIC UNIT 9039 $57, Rubber Tracks, Open ROPS/FOPS Cab SVL75-2W COMPACT TRACK LOADER BASIC UNIT 9039 $57, Rubber Tracks, Open ROPS/FOPS Cab Mechanical Quick Coupler SVL75-2HW COMPACT TRACK LOADER BASIC UNIT 9039 $58, Rubber Tracks, Open ROPS/FOPS Cab SVL75-2C COMPACT TRACK LOADER BASIC UNIT 9039 $61, Rubber Tracks, A/C ROPS/FOPS Cab Mechanical Quick Coupler SVL75-2HC COMPACT TRACK LOADER BASIC UNIT 9039 $62, Rubber Tracks, A/C ROPS/FOPS Cab SVL75-2WC COMPACT TRACK LOADER BASIC UNIT 9039 $62, Rubber Tracks, A/C ROPS/FOPS Cab Mechanical Quick Coupler SVL75-2HWC COMPACT TRACK LOADER BASIC UNIT 9039 $64, Rubber Tracks, A/C ROPS/FOPS Cab PART 2 BUCKETS QUICK ATTACH BUCKETS AP-HD68LT 68 Heavy Duty, Low Profile, Standard Floor, Teeth, Side 545 $1, Cutter, 14.2 cu-ft heaped capacity AP-HD68LC 68 Heavy Duty, Low Profile, Standard Floor, Cutting Edge, 598 $1, Side Cutter, 14.2 cu-ft heaped capacity AP-HD68LLT 68 Heavy Duty, Low Profile, Long Floor, Teeth, 588 $1, Side Cutter, 17.9 cu-ft heaped capacity AP-HD68LLC 68 Heavy Duty, Low Profile, Long Floor, Cutting Edge, Side 641 $1, Cutter, 17.9 cu-ft heaped capacity AP-HD74LT 74 Heavy Duty, Low Profile, Standard Floor, Teeth, Side 581 $1, Cutter, 15.4 cu-ft heaped capacity Complete revision March 1, Page 17-7

29 SVL75-2 PART 2 BUCKETS (Continued) AP-HD74LC 74 Heavy Duty, Low Profile, Standard Floor, Cutting Edge, 636 $1, Side Cutter, 15.4 cu-ft heaped capacity AP-HD74LLT 74 Heavy Duty Low Profile, Long Floor, Teeth, Side Cutter 626 $1, cu-ft heaped capacity AP-HD74LLC 74 Heavy Duty, Low Profile, Long Floor, Cutting Edge, Side 680 $1, Cutter, 19.2 cu-ft heaped capacity Refer to Service Parts for replacment side cutters, cutting edges, and teeth on AP Buckets S6622A 72 4 in 1 Bucket, no BOE nor Side Cutter 910 $4, Recommend use of S6689 Hose Stay S Utility Scrap Grapple, Bolt-on Edge optional 955 $4, Recommend use of S6689 Hose Stay S Spill Guard 4-N-1 Bucket 30 $ PART 3 ATTACHMENTS S6691 Roof Mounted Water Tank 65 $1, Includes Mounting Hardware, Frame, Tank, 12V Pump and Wiring Harness KXB560Q HYDRAULIC BREAKER 820 $12, Includes manual, side plates, one moil point and one chisel point. Requires a S6693A hose kit, S6692A mount bracket, and Special Application Door S6693A HYDRAULIC BREAKER HOSE KIT 7 $ S6692A HYDRAULIC BREAKER BRACKET 175 $1, Required for KXB560Q Hydraulic Breakers S6698 SPECIAL APPLICATION DOOR FOR ROPS MODELS 135 $3, With frame and wiper, to be used with ROPS models only with swing style door. Made from polycarbonate. Required when using a hydraulic breaker and recommended when using a rotary cutter or mowers and mulchers Can still be used in combination with S6682, S6683A, S8884, S6685, and S6687 S6658 SPECIAL APPLICATION DOOR FOR CAB MODELS 135 $3, With frame and wiper, to be used with Enclosed Cab models only with tilt-up style door. Made from polycarbonate. Required when using a hydraulic breaker and recommended when using a rotary cutter or mowers and mulchers. Complete revision March 1, Page 17-8

30 SVL75-2 PART 3 ATTACHMENTS (Continued) K7773 ACCUMULATOR CHARGE KIT 5 $1, Required for hydraulic breaker maintenance only, one kit for servicing all breakers. S6699 Multifunction Controller Kit 5 $ To control 14-pin attachments (or 8-pin attachments with S6651 adapter) which feature multiple hydraulic functions controlled by solenoid valves. S pin to 14-pin Adapter Harness 1 $ Allows a user to control an attachment with a 14-pin electrical connector that does not use the Kubota pin-out configuration. Requires S6699. S pin to 14-pin Adapter Harness 1 $ Allows a user to control an attachment with an 8-pin Deutsch electrical connector. Requires S6699 REPLACEMENT CAB/ROPS FOR SVL75-2 Complete package that is direct-fit to the main frame mounting points. Hydraulic hoses ready to fit into main manifold. Includes standard suspension seat and new "bolt-on" style grab handles. Lift-Assist gas struts are not included. PART 4 ACCESSORIES K9926 RETRACTABLE SEAT BELT OPTION (3 WIDE) 3 $82.00 As required in some states for OSHA compliance. S6676 Strobe Light Kit 3 $ S6680 Accessory Wire Harness is required to connect the S6676 to the machine's main wire harness. S6677 Red Tail Light Kit 3 $ S6678 Rotating Beacon Light Kit 3 $ S6680 Accessory Wire Harness is required to connect the S6678 to the machine's main wire harness. S6679 Air Ride Seat Suspension Kit 51 $ S6680 Accessory Wire Harness is required to connect the S6679 to the machine's main wire harness on SVL75 Serial Number < S6680 Accessory Wire Harness Kit 1 $43.00 S6641 Rearview Mirror includes Mounting Bracket & Hardware 1 $22.00 S6689 Hose Stay (Group attachment hoses together at 5 $72.00 Loader frame base) Recommend for use with: Brush Grapple, Scrap Grapple, Hopper Sweeper, 4-in-1 bucket, and Tilt Attach Complete revision March 1, Page 17-9

31 SVL75-2 PART 4 ACCESSORIES (Continued) ENCLOSURE KITS (for ROPS Models Only) S6681A Door Kit (Swing) with Frame and Wiper 170 $1, and Quick Glass Release Handles S6682 Sliding Side Window Kit 170 $ S6683A Heater Kit 16 $ S6684 Windshield Washer Kit 5 $ S6685 Circulation Fan Kit 25 $ S6687 Mounting Bracket for Magnetic Base 3 $62.00 PART 6 Available from Parts V Pin Attachment Coupler Kit V Engine Bonnet Lock Kit V Radiator Screen Kit Engine Block Heater Radio Kit for Cab Models prior to serial number Includes Mini radio, Waterproof speakers, 14" Rubber mast antenna, Mounting brackets, Adapter harness Radio for New Cab Models beginning with serial number Radio with Bluetooth for New Cab Models beginning with serial number Radio Kit for Open Station Models prior to serial number Includes Mini radio, Waterproof speakers, 14" Rubber mast antenna, Mounting brackets, Adapter harness Rear View Camera Kit prior to serial number Includes 5.6" Heavy-duty Monitor, Waterproof CCD color camera, Camera bracket, Monitor bracket, Power harness, Y connector, Hardware Complete revision March 1, Page 17-10

32 SVL75-2 PART 7 APPROVED ALLIED ATTACHMENTS MANUFACTURER S NUMBER Trencher Std Flow, Model 625 w/36 Boom, 6 cup type Teeth, TES chain Trencher Std Flow, model 625 with 48 boom, 6 cup type Teeth, TES chain Dozer Blade Tilt Attach (Recommend use of S6689 Hose Stay) Utility Brush Grapple (Recommend use of S6689 Hose Stay) Construction Brush Grapple (recommended for SVL90) Tree Spade 36" - Series Vibratory Roller - model: PD-VRP Rock Saw - RS24 (ONLY for SVL90-2 Hi-Flow) Root Rake w/grapple Skid Swing Hoe Tree Forks Post Driver - model: PD4800 LAF Tree Scoop 48" Concrete Claw Side Discharge Bucket 72" CONTACT: Bradco 503 Gay Street Delhi, IA (800) Fax (319) FFC 503 Gay Street Delhi, IA (800) Fax (319) Paladin/Bradco 503 Gay Street Delhi, IA (800) Fax (319) Paladin/FFC 503 Gay Street Delhi, IA (800) Fax (319) Complete revision March 1, Page 17-11

33 SVL90-2 SVL90-2 Compact Track Loader FEATURES BASIC UNITS Interim Tier 4 Certified Kubota Diesel Engine SVL90-2, 17.7 Rubber Tracks, Open ROPS/FOPS Cab Electronic Travel Torque Management System Mechanical Quick Coupler Vertical Lift Path Loader Frame SVL90-2H, 17.7 Rubber Tracks, Open ROPS/FOPS Cab Standard Front Quick Coupler, Float Standard Option SVL90-2F, 17.7 Rubber Tracks, Open ROPS/FOPS Cab Loader Arm Self-Leveling Mechanical Quick Coupler, High Flow Auxiliary Hydraulics Loader Boom Lock SVL90-2HF, 17.7 Rubber Tracks, Open ROPS/FOPS Cab Open ROPS/FOPS, High Flow Auxiliary Hydraulics Optional enclosed and pressurized cab with A/C SVL90-2C, 17.7 Rubber Tracks, A/C ROPS/FOPS Cab High Back, Adjustable, Vinyl, Suspension Seat Mechanical Quick Coupler 2" Retractable Seat Belt And 2-Piece Seat Bar SVL90-2HC, 17.7 Rubber Tracks, A/C ROPS/FOPS Cab 12V Electric Outlet 23.1 gpm Auxiliary Hydraulics Standard, 33.7 gpm Option SVL90-2FC, 17.7 Rubber Tracks, A/C ROPS/FOPS Cab Direct To Tank Return Line Mechanical Quick Coupler, High Flow Auxiliary Hydraulics Rigid Mounted Undercarriage, 5 Lower Track Rollers SVL90-2HFC, 17.7 Rubber Tracks, A/C ROPS/FOPS Cab Rubber Tracks, 17.7 Standard, High Flow Auxiliary Hydraulics Two Speed Travel System Automatic Wet Disk Parking Brake Kubota 4 Hydraulic Pump Load Sensing System 1 Gear and 2 Variable Displacement Pumps, 1 additional Gear pump for high flow Option ENGINE Hydraulic Joystick Controls V3800-CR-TE4 Kubota Interim Tier 4 Diesel Engine ISO Operating Pattern 4 Cylinder, 4 Cycle, Turbo Charged Hand And Foot Throttle Controls 92.0 Gross 2400 rpm (SAE J1995) Stall Guard Engine Control Automatic Glow Plugs DIMENSIONS Key Switch Stop System Cab Height 83.4 Self Bleed Fuel System Width (without attachment) Front And 2 Rear Working Lights Length (without attachment) Hour Meter, Engine Temperature And Fuel Length of Track on Ground 65.6 Gauges And Warning Lights Horn And Backup Alarm Lockable Fuel Cap OPERATIONAL DIMENSIONS Operating Weight*, SVL90-2H, 17.7 Rubber Tracks, Open ROPS/FOPS Cab, Mechanical Quick Coupler 11,023 lbs. Rated Operating Capacity 35% of Tipping Load complies with ISO and SAE J 818) 3,010 lbs. Rated Operating Capacity 50% of Tipping Load 4,300 lbs. Tipping Load 8,600 lbs. Auxiliary Hydraulics Flow 23.1 / 33.7 gpm Travel Speed (Low / High) 5.0 / 7.3 mph Maximum Height 40.7 Height to Hinge Pin Ground Pressure 4.2 psi. Traction Force 12,178 lbf. * Includes operator s weight, 175 lbs. Complete revision March 1, Page 17-12

34 SVL90-2 HOW TO SELECT AN SVL90-2 Compact Track Loader (Sample Order Information Page) Below are examples of a complete SVL90 order. To submit your order, please select the Basic Unit Model that you desire from Part 1. Then select the attachments from Parts 2 and 3 needed to complete your order. STEP 1) STEP 2) Select from Part 1 the Basic Unit that fits your needs. For example, choose a SVL90-2 and get: Base Model, rubber tracks, open ROPS/FOPS cab, and a mechanical quick coupler. Select from Parts 2 and 3 the attachments necessary to make the unit a complete machine. Choose buckets and bolt-on edges, accessories, or a hydraulic breaker. Parts items are available in Part 4. (SAMPLE ) STANDARD UNIT SVL90-2 COMPLETE AND PRICE BASIC UNIT: SVL90-2 COMPACT TRACK LOADER BASIC UNIT $65, Rubber Tracks Open ROPS/FOPS Cab Mechanical Quick Coupler ATTACHMENTS: AP-HD80LT 80" low profile standard floor bucket with 541 $1, teeth and bolt-on side cutters AP-PFL " Pallet Forks, 4500 lbs Capacity (Single Piece) 460 $1, $68, STANDARD UNIT SVL90-2HC COMPLETE AND PRICE BASIC UNIT: SVL90-2HC COMPACT TRACK LOADER BASIC UNIT $72, Rubber Tracks A/C ROPS/FOPS Cab ATTACHMENTS: S " 4 in 1 Bucket 965 $4, S6679 Air Ride Seat Suspension Kit 51 $ $77, Complete revision March 1, Page 17-13

35 SVL90-2 PART 1 MODEL SVL90-2 BASIC UNITS SVL90-2 COMPACT TRACK LOADER BASIC UNIT $65, Rubber Tracks, Open ROPS/FOPS Cab Mechanical Quick Coupler SVL90-2H COMPACT TRACK LOADER BASIC UNIT $67, Rubber Tracks, Open ROPS/FOPS Cab SVL90-2F COMPACT TRACK LOADER BASIC UNIT $68, Rubber Tracks, Open ROPS/FOPS Cab Mechanical Quick Coupler, High Flow Auxiliary Hydraulics SVL90-2HF COMPACT TRACK LOADER BASIC UNIT $69, Rubber Tracks, Open ROPS/FOPS Cab, High Flow Auxiliary Hydraulics SVL90-2C COMPACT TRACK LOADER BASIC UNIT $70, Rubber Tracks, A/C ROPS/FOPS Cab Mechanical Quick Coupler SVL90-2HC COMPACT TRACK LOADER BASIC UNIT $72, Rubber Tracks, A/C ROPS/FOPS Cab SVL90-2FC COMPACT TRACK LOADER BASIC UNIT $73, Rubber Tracks, A/C ROPS/FOPS Cab Mechanical Quick Coupler, High Flow Auxiliary Hydraulics SVL90-2HFC COMPACT TRACK LOADER BASIC UNIT $74, Rubber Tracks, A/C ROPS/FOPS Cab, High Flow Auxiliary Hydraulics PART 2 BUCKETS -- QUICK ATTACH AP-HD80LT 80 Heavy Duty, Low Profile, Standard Floor, Teeth, 667 $1, Side Cutter, 16.9 cu-ft heaped capacity AP-HD80LC 80 Heavy Duty Low Profile, Standard Floor, Cutting 725 $1, Edge, Side Cutter, 16.8 cu-ft heaped capacity AP-HD80LLT 80 Heavy Duty Low Profile, Long Floor, Teeth, 717 $1, Side Cutter, 20.9 cu-ft heaped capacity AP-HD80LLC 80 Heavy Duty, Low Profile, Long Floor, Cutting Edge, 774 $1, Side Cutter, 20.9 cu-ft heaped capacity AP-HD80HT 80 Heavy Duty High Capacity, Teeth, Side Cutter 745 $1, cu-ft heaped capacity AP-HD80HC 80 Heavy Duty, High Capacity, Side Cutter and BOCE 802 $1, cu-ft heaped capacity Refer to Service Parts for replacment side cutters, cutting edges, and teeth on AP Buckets S in-1 Bucket, no BOE nor Side Cutter 965 $4, Recommend use of S6689 Hose Stay S Construction Scrap Grapple, Bolt-on Edge Optional 1211 $4, Recommend use of S6689 Hose Stay S " Bolt-on Cutting Edge for Scrap Grapple 125 $ S Spill Guard for S N-1 bucket 34 $ Complete revision March 1, Page 17-14

36 SVL90-2 PART 3 ATTACHMENTS S6691 Roof Mounted Water Tank 65 $1, Includes Mounting Hardware, Frame, 30 gal. Tank, 12V Pump and Wiring Harness KXB560Q HYDRAULIC BREAKER 820 $12, Includes manual, side plates, one moil point and one chisel point. Requires S6693A Hose Kit, S6692A Mount Bracket and Special Application Door S6693A HYDRAULIC BREAKER HOSE KIT 7 $ S6692A HYDRAULIC BREAKER BRACKET 175 $1, Required for KXB560Q Hydraulic Breakers S6698 SPECIAL APPLICATION DOOR FOR ROPS MODELS 135 $3, With frame and wiper, to be used with ROPS models only with swing-style door. Made from polycarbonate. Required when using a hydraulic breaker and recommended when using a rotary cutter or mowers and mulchers Can still be used in combination with S6682, S6683A, S8884, S6685, and S6687 S6658 SPECIAL APPLICATION DOOR FOR CAB MODELS 135 $3, With frame and wiper, to be used with Enclosed Cab models only with tilt-up style door. Made from polycarbonate. Required when using a hydraulic breaker and recommended when using a rotary cutter or mowers and mulchers. K7773 ACCUMULATOR CHARGE KIT 5 $1, Required for hydraulic breaker maintenance only, one kit for servicing all breakers. S6699 Multifunction Controller Kit 5 $ To control 14-pin attachments (or 8-pin attachments with S6651 adapter) which feature multiple hydraulic functions controlled by solenoid valves. S pin to 14-pin Adapter Harness 1 $ Allows a user to control an attachment with a 14-pin electrical connector that does not use the Kubota pin-out configuration. Requires S6699. S pin to 14-pin Adapter Harness 1 $ Allows a user to control an attachment with an 8-pin Deutsch electrical connector. Requires S6699 REPLACEMENT CAB/ROPS Complete package that is direct-fit to the main frame mounting points. Hydraulic hoses ready to fit into main manifold. Includes standard suspension seat and new "bolt-on" style grab handles. Lift-Assist gas struts are not included. S6629 REPLACEMENT OPEN ROPS CAB/SVL $7, Complete revision March 1, Page 17-15

37 SVL90-2 PART 4 ACCESSORIES K9926 RETRACTABLE SEAT BELT OPTION (3 WIDE) 3 $82.00 As required in some states for OSHA compliance. S6676 Strobe Light Kit 3 $ S6680 Accessory Wire Harness is required to connect the S6676 to the machine's main wire harness. S6677 Red Tail Light Kit 3 $ S6678 Rotating Beacon Light Kit 3 $ S6680 Accessory Wire Harness is required to connect the S6678 to the machine's main wire harness. S6679 Air Ride Seat Suspension Kit 51 $ S6680 Accessory Wire Harness is required to connect the S6679 to the machine's main wire harness on SVL90 Serial Number < S6680 Accessory Wire Harness Kit 1 $43.00 S6641 Rear View Mirror, includes Mounting Bracket & hardware 1 $22.00 S6689 Hose Stay (Group hoses together at loader frame base) 5 $72.00 Recommend for use with: Brush Grapple, Scrap Grapple, SBB Hopper Sweeper, 4-in-1 bucket, and Tilt Attach ENCLOSURE KITS for ROPS S6681A Door Kit (Swing) with Frame and Wiper 170 $1, and Quick Glass Release Handles S6682 Sliding Side Window Kit 170 $ S6683A Heater Kit 16 $ S6684 Windshield Washer Kit 5 $ S6685 Circulation Fan Kit 25 $ S6687 Mounting Bracket for Magnetic Base 3 $62.00 PART 5 Available from Parts V Pin Attachment Coupler Kit V Engine Bonnet Lock Kit V Radiator Screen Kit Engine Block Heater Radio Kit for Cab Models, With Mounting Kit Includes Mini radio, Waterproof speakers, 14" Rubber mast antenna, Mounting brackets, Adapter harness. If Cab Replacement S6630A is installed then order or (w/bluetooth) Radio Kit for Open Station Models. Includes Mini radio, Waterproof speakers, 14" Rubber mast antenna, Mounting brackets, Adapter harness Rear View Camera Kit Includes 5.6" Heavy-duty Monitor, Waterproof CCD color camera, Camera bracket, Monitor bracket, Power harness, Y connector, Hardware Complete revision March 1, Page 17-16

38 SVL90-2 PART 6 APPROVED ALLIED ATTACHMENTS MANUFACTURER S NUMBER Trencher Std Flow, model 625 with 36 boom, 6 cup type teeth, TES chain Trencher Std Flow, model 625 with 48 boom, 6 cup type Teeth, TES chain Trencher Hi-Flow, model 640 with 36 boom, 70/30 Shark/Cup teeth, TES chain Trencher Hi-Flow, model 640 with 48 boom, 70/30 Shark/Cup teeth, TES chain Dozer Blade Dozer Blade Tilt Attach (Recommend use of S6689 Hose Stay) Cold Planer Model HP cutting width for SVL90/-2 Hi-Flow units only Utility Brush Grapple (recommended for SVL Construction Brush Grapple (recommended for SVL90-2 CONTACT Bradco 503 Gay Street Delhi, IA (800) Fax (319) FFC 503 Gay Street Delhi, IA (800) Fax (319) Auger Drive - X HEX Drive, incl. mounting frame, Hi-Flow Rated at gpm McMillen 503 Gay Street Delhi, IA (800) Fax (319) For Auger Bit selection, please consult the Paladin catalog, as there is a wide variety of size, shapes, and applications. Complete revision March 1, Page 17-17

39 SVL90-2 PART 6 APPROVED ALLIED ATTACHMENTS (Cont.) MANUFACTURER S NUMBER Tree Spade 36" - Series Vibratory Roller - model: PD-VRP Rock Saw - RS24 (ONLY for SVL90-2 Hi-Flow) Root Rake w/grapple Skid Swing Hoe Tree Forks Post Driver - model: PD4800 LAF Tree Scoop 48" Concrete Claw Side Discharge Bucket 72" High Volume Heavy Duty Snow Bucket - 108" CONTACT Paladin/Bradco 503 Gay Street Delhi, IA (800) Fax (319) Paladin/FFC 503 Gay Street Delhi, IA (800) Fax (319) Complete revision March 1, Page 17-18

40 SVL95-2s SVL95-2s Compact Track Loader FEATURES BASIC UNITS Final Tier 4 Certified Kubota Diesel Engine SVL95-2S, 17.7 Rubber Tracks, Open ROPS/FOPS Cab Electronic Travel Torque Management System Mechanical Quick Coupler Vertical Lift Path Loader Frame SVL95-2SH, 17.7 Rubber Tracks, Open ROPS/FOPS Cab Standard Front Quick Coupler, Float Standard Option SVL95-2SF, 17.7 Rubber Tracks, Open ROPS/FOPS Cab Loader Arm Self-Leveling Mechanical Quick Coupler, High Flow Auxiliary Hydraulics Loader Boom Lock SVL95-2SHF, 17.7 Rubber Tracks, Open ROPS/FOPS Cab Open ROPS/FOPS, High Flow Auxiliary Hydraulics Optional enclosed and pressurized cab with A/C SVL95-2SC, 17.7 Rubber Tracks, A/C ROPS/FOPS Cab High Back, Adjustable, Vinyl, Suspension Seat Mechanical Quick Coupler 2" Retractable Seat Belt And 2-Piece Seat Bar SVL95-2SHC, 17.7 Rubber Tracks, A/C ROPS/FOPS Cab 12V Electric Outlet 23.1 gpm Auxiliary Hydraulics Standard, 40.0 gpm Option SVL95-2SFC, 17.7 Rubber Tracks, A/C ROPS/FOPS Cab Direct To Tank Return Line Mechanical Quick Coupler, High Flow Auxiliary Hydraulics Rigid Mounted Undercarriage, 5 Lower Track Rollers SVL95-2SHFC, 17.7 Rubber Tracks, A/C ROPS/FOPS Cab High Grip Rubber Tracks, 17.7 Standard, High Flow Auxiliary Hydraulics Two Speed Travel System Automatic Wet Disk Parking Brake Kubota 4 Hydraulic Pump Load Sensing System 3 Variable Displacement Pumps, 1 additional piston pump for High Flow Option ENGINE Hydraulic Joystick Controls V3800-Tier 4 Kubota Final Tier 4 Diesel Engine ISO Operating Pattern 4 Cylinder, 4 Cycle, Turbo Charged Dial Knob And Foot Throttle Controls 96.0 Gross 2400 rpm Stall Guard Engine Control Automatic Glow Plugs DIMENSIONS Key Switch Stop System Cab Height 83.4 Self Bleed Fuel System Width (without attachment) Front And 2 Rear Working Lights Length (without attachment) Hour Meter, Engine Temperature, DEF, And Fuel Length of Track on Ground 65.6 Gauges And Warning Lights Horn And Backup Alarm Lockable DEF Tank Cap Lockable Fuel Cap Radio Ready on Enclosed Cabs OPERATIONAL DIMENSIONS Operating Weight*, SVL95-2s, 17.7 Rubber Tracks, Open ROPS/FOPS Cab, Mechanical Quick Coupler 11,299 lbs. Rated Operating Capacity 35% of Tipping Load complies with ISO and SAE J 818) 3,200 lbs. Rated Operating Capacity 50% of Tipping Load 4,572 lbs. Tipping Load 9,143 lbs. Auxiliary Hydraulics Flow 23.1 / 40.0 gpm Travel Speed (Low / High) 5.0 / 7.3 mph Maximum Height 40.7 Height to Hinge Pin Ground Pressure 4.4 psi. Traction Force 12,178 lbf. * Includes operator s weight, 175 lbs. Complete revision March 1, Page 17-19

41 SVL95-2s HOW TO SELECT AN SVL95-2s Compact Track Loader (Sample Order Information Page) Below are examples of a complete SVL95-2s order. To submit your order, please select the Basic Unit Model that you desire from Part 1. Then select the attachments from Parts 2 and 3 needed to complete your order. STEP 1) STEP 2) Select from Part 1 the Basic Unit that fits your needs. For example, choose a SVL95-2s and get: Base Model, rubber tracks, open ROPS/FOPS cab, and a mechanical quick coupler. Select from Parts 2 and 3 the attachments necessary to make the unit a complete machine. Choose buckets and bolt-on edges, accessories, or a hydraulic breaker. Parts items are available in Part 4. (SAMPLE ) STANDARD UNIT SVL95-2s COMPLETE AND PRICE BASIC UNIT: SVL95-2S COMPACT TRACK LOADER BASIC UNIT $71, Rubber Tracks Open ROPS/FOPS Cab Mechanical Quick Coupler ATTACHMENTS: AP-HD80LT 80" low profile standard floor bucket with 541 $1, teeth and bolt-on side cutters AP-PFL " Pallet Forks, 4500 lbs Capacity (Single Piece) 460 $1, $73, STANDARD UNIT SVL95-2SHC COMPLETE AND PRICE BASIC UNIT: SVL95-2SHC COMPACT TRACK LOADER BASIC UNIT $77, Rubber Tracks A/C ROPS/FOPS Cab ATTACHMENTS: S6679 Air Ride Seat Suspension Kit 51 $ $77, Complete revision March 1, Page 17-20

42 SVL95-2s PART 1 MODEL SVL95-2S BASIC UNITS SVL95-2S COMPACT TRACK LOADER BASIC UNIT $71, Rubber Tracks, Open ROPS/FOPS Cab Mechanical Quick Coupler SVL95-2SH COMPACT TRACK LOADER BASIC UNIT $72, Rubber Tracks, Open ROPS/FOPS Cab SVL95-2SF COMPACT TRACK LOADER BASIC UNIT $73, Rubber Tracks, Open ROPS/FOPS Cab Mechanical Quick Coupler, High Flow Auxiliary Hydraulics SVL95-2SHF COMPACT TRACK LOADER BASIC UNIT $74, Rubber Tracks, Open ROPS/FOPS Cab, High Flow Auxiliary Hydraulics SVL95-2SC COMPACT TRACK LOADER BASIC UNIT $76, Rubber Tracks, A/C ROPS/FOPS Cab Mechanical Quick Coupler SVL95-2SHC COMPACT TRACK LOADER BASIC UNIT $77, Rubber Tracks, A/C ROPS/FOPS Cab SVL95-2SFC COMPACT TRACK LOADER BASIC UNIT $78, Rubber Tracks, A/C ROPS/FOPS Cab Mechanical Quick Coupler, High Flow Auxiliary Hydraulics SVL95-2SHFC COMPACT TRACK LOADER BASIC UNIT $79, Rubber Tracks, A/C ROPS/FOPS Cab, High Flow Auxiliary Hydraulics PART 2 BUCKETS -- QUICK ATTACH AP-HD80LT 80 Heavy Duty, Low Profile, Standard Floor, Teeth, 667 $1, Side Cutter, 16.9 cu-ft heaped capacity AP-HD80LC 80 Heavy Duty Low Profile, Standard Floor, Cutting 725 $1, Edge, Side Cutter, 16.8 cu-ft heaped capacity AP-HD80LLT 80 Heavy Duty Low Profile, Long Floor, Teeth, 717 $1, Side Cutter, 20.9 cu-ft heaped capacity AP-HD80LLC 80 Heavy Duty, Low Profile, Long Floor, Cutting Edge, 774 $1, Side Cutter, 20.9 cu-ft heaped capacity AP-HD80HT 80 Heavy Duty High Capacity, Teeth, Side Cutter 745 $1, cu-ft heaped capacity AP-HD80HC 80 Heavy Duty, High Capacity, Side Cutter and BOCE 802 $1, cu-ft heaped capacity Refer to Service Parts for replacment side cutters, cutting edges, and teeth on AP Buckets Complete revision March 1, Page 17-21

43 SVL95-2s PART 3 ATTACHMENTS KXB560Q HYDRAULIC BREAKER 820 $12, Includes manual, side plates, one moil point and one chisel point. Requires S6693A Hose Kit, S6692A Mount Bracket and Special Application Door S6693A HYDRAULIC BREAKER HOSE KIT 7 $ S6692A HYDRAULIC BREAKER BRACKET 175 $1, Required for KXB560Q Hydraulic Breakers S6698 SPECIAL APPLICATION DOOR FOR ROPS MODELS 135 $3, With frame and wiper, to be used with ROPS models only with swing-style door. Made from polycarbonate. Required when using a hydraulic breaker and recommended when using a rotary cutter or mowers and mulchers Can still be used in combination with S6682, S6683A, S8884, S6685, and S6687 S6658 SPECIAL APPLICATION DOOR FOR CAB MODELS 135 $3, With frame and wiper, to be used with Enclosed Cab models only with tilt-up style door. Made from polycarbonate. Required when using a hydraulic breaker and recommended when using a rotary cutter or mowers and mulchers. K7773 ACCUMULATOR CHARGE KIT 5 $1, Required for hydraulic breaker maintenance only, one kit for servicing all breakers. S6699 Multifunction Controller Kit 5 $ To control 14-pin attachments (or 8-pin attachments with S6651 adapter) which feature multiple hydraulic functions controlled by solenoid valves. S pin to 14-pin Adapter Harness 1 $ Allows a user to control an attachment with a 14-pin electrical connector that does not use the Kubota pin-out configuration. Requires S6699. S pin to 14-pin Adapter Harness 1 $ Allows a user to control an attachment with an 8-pin Deutsch electrical connector. Requires S6699. Complete revision March 1, Page 17-22

44 SVL95-2s PART 4 ACCESSORIES K9926 RETRACTABLE SEAT BELT OPTION (3 WIDE) 3 $82.00 As required in some states for OSHA compliance. S6676 Strobe Light Kit 3 $ S6680 Accessory Wire Harness is required to connect the S6676 to the machine's main wire S6677 Red Tail Light Kit 3 $ S6678 Rotating Beacon Light Kit 3 $ S6680 Accessory Wire Harness is required to connect the S6678 to the machine's main wire S6679 Air Ride Seat Suspension Kit 51 $ S6680 Accessory Wire Harness Kit 1 $43.00 S6641 Rear View Mirror, includes Mounting Bracket & hardware 1 $22.00 S6689 Hose Stay (Group hoses together at loader frame base) 5 $72.00 Recommend for use with: Brush Grapple, Scrap Grapple, SBB Hopper Sweeper, 4-in-1 bucket, and Tilt Attach PART 6 Available from Parts (Refer to PARTS for Pricing) V Pin Attachment Coupler Kit V Engine Bonnet Lock Kit V Radiator Screen Kit Radio Kit for Open Station Models. Includes Mini radio, Waterproof speakers, 14" Rubber mast antenna, Mounting brackets, Adapter harness Radio for Enclosed Cab Models Radio with Bluetooth for Enclosed Cab Models Complete revision March 1, Page 17-23

45 COMPACT TRACK LOADERS REPLACEMENT ENGINES Effective June 2, 2014 all replacement engines must be ordered through the Parts Department. See Parts Bulletin DPB R01 Complete revision March 1, Page 17-24

46 SEQ # Tractors: Skid Steers Attachments T-631(5) State of Minnesota PRICING PAGE - METHOD # 2 (Typed Responses Required) May, 2016 Price quote for: TRACTOR: SKID STEERS Vendor Name: NIEBUR TRACTOR & EQUIPMENT Contact Person: DAN BEISSEL Street Address: TH STREET EAST P.O. Box: City, State, Zip HASTINGS, MN Phone #: Toll Free #: Fax #: Address: d.beissel@nieburtractor.com PERCENTAGE DISCOUNT PRICING 1.0 MANUFACTURER 2.0 DATE AND ID. OF PRICE LIST 3.0 PERCENTAGE DISCOUNT FROM PRICE LIST 1-Apr % on base unit 4.0 PRICE FOR ADDITIONAL SERVICE MANUAL $ PRICE FOR ADDITIONAL PARTS MANUAL $ PRICE FOR ADDITIONAL OPERATIONS MANUAL $ EXTENDED WARRANTY OPTIONS Use this section to offer performance/warranty options, number these items starting with 9.1, 9.2, 9.3, etc. (Specify years, miles or hours extended term covers.) NEW EQUIPMENT RENTAL PROGRAM If rental programs are available on the new equipment offered, with the option to purchase, list the hourly/weekly/monthly rental rate. Indicate the percent of rental fee paid by the purchaser that will be applied to the purchase price. See Solicitation Special Terms & Conditions. Hourly Rental Rate: $ Weekly Rental Rate: $ Monthly Rental Rate: $ Percent (%) of Rental Fee applied to purchase price: % If the new rental equipment is purchased and finance charges are applicable for the actual rental term only, state the actual interest rate here: 7.0 VENDOR OWNED RENTAL RETURN OR DEMO EQUIPMENT PROGRAM See Solicitation Special Terms and Conditions. DEDUCT cost per Used Hour from the original Contract Price $ 8.0 DISCOUNT OFF FOR RELATED PARTS & ACCESSORIES 12% (See Special Terms and Conditions) Price List Date and Number 9.0 DELIVERY CHARGES - SEE SPECIAL TERMS AND CONDITIONS NO FLAT RATE ALLOWED Hastings, MN DELIVERY STARTING POINT - City, State, Zip PRICE PER LOADED MILE $2.50 MINIMUM DELIVERY CHARGE (if applicable) $ INSTALLATION - PER HOUR (Hourly Shop Rate): (Installation services may be requested on an "as needed" basis - see special terms and conditions.) $75.00

47 AP SERIES ATTACHMENTS WHOLEGOODS PRICE LIST EFFECTIVE MARCH 1, 2016 Please replace all pages of this section of the current price book. These pages are a complete revision of this section. All prices are effective as of March 1, FREE FREIGHT ON EACH ATTACHMENT GREATER THAN $7500 (LIST) 3/2/2016 Corrected description of item 21. See page AP-SC2560, 60" Rotary Cutter, GPM, is also compatible with the SVL90-2 & SVL95-2s High Flow Models. AP-SC2572, 72" Rotary Cutter, GPM, is also compatible with the SVL90-2 & SVL95-2s High Flow Models. See page AP-SBL2574, 74" Snow Blower, GPM, is not compatible with the SSV75. See page /31/2016 Corrected factory number for AP-SR2690 item 21. See page Complete revision March 1, Page 19-1

48 AP SERIES ATTACHMENTS Some options on attachments may contain service part numbers as well as whole good numbers. These service part numbers are for reference only. Always check with service parts for current pricing. Complete revision March 1, Page 19-2

49 AP SERIES ATTACHMENTS AUGERS AP-SA20 AP-SA35 Hydraulically Driven Planetary Gearbox Hydraulically Driven Planetary Gearbox Hydraulically Reversible Hydraulically Reversible 2 Motor options: Med (Std) or High Flow Output Shaft: 2" Hex or 2 9/16" OD Round Output Shaft: 2" Hex Auger Teeth: Forged, Individually Replaceable Auger Teeth: Forged, Individually Replaceable 40 Degree Angle Installed on Flat Side 40 Degree Angle Installed on Flat Side 50 Degree Angle Installed on Angled Side 50 Degree Angle Installed on Angled Side 9" - 4 teeth, 12" - 4, 15" - 5, 18" - 6, 9" - 4 teeth, 12" - 4, 15" - 5, 18" - 6, 24" - 8, 30" - 10, 36" " - 8, 30" - 10, 36" - 12 Tree Augers: 24" - 9, 30" - 11, 36" -13 Tree Augers: 24" - 9, 30" - 11, 36" -13 Auger Pipe: 2 1/2" ID Auger Pipe: 21/2" ID Auger Flighting Thickness: 1/4" Auger Flighting Thickness: 1/4" Auger Length: 48", 46" length on 9" Auger Length: 48", 46" length on 9" Pilot: Cast Steel, 3 Drill Points Includes 8' Hose & Flat Face Couplers Torque (at 100% Efficiency) Med-Flow: PSI High-Flow: PSI FREE FREIGHT ON EACH ATTACHMENT GREATER THAN $7500 (LIST) COMPATIBILITY CHART Kubota Model Description SVL75-2 SVL90-2 SVL95-2s SSV65 SSV75 AP-SA35 Post Hole Digger, Heavy Duty, GPM X X X X X AP-SA20 Post Hole Digger, GPM X X X Post Hole Digger, GPM X X High Flow Only High Flow Only AUGERS AP-SA20 Post Hole Digger, 2" Hex Output Shaft $ YOU MUST CHOOSE THE MOUNT FEATURE 05 Skid Steer Mount with 8' Hoses 213 $ YOU MUST CHOOSE A MOTOR 42 Med Flow Hyd Motor GPM 50 $1, High Flow Hyd Motor GPM 50 $1, Complete revision March 1, Page 19-3

50 AP SERIES ATTACHMENTS AUGERS (continued) YOU MAY CHOOSE ONE AUGER 09 9" Double Flight Auger 70 $ LP A 12 12" Double Flight Auger 98 $ LP A 15 15" Double Flight Auger 119 $ LP A 18 18" Double Flight Auger 131 $ LP A 24 24" Double Flight Auger 214 $ LP A 26 24" Tree Auger 162 $ LP A 30 30" Double Flight Auger 285 $1, LP A 32 30" Tree Auger 235 $1, LP A 36 36" Double Flight Auger 380 $1, LP A 38 36" Tree Auger 305 $1, LP A YOU MUST CHOOSE THE COUPLERS 50 1/2" Flat Face Couplers 3 $ AP-SA35 Post Hole Digger, Heavy Duty, GPM, 8' Hoses & $ /2" Flat Face Couplers YOU MUST CHOOSE ONE OUTPUT SHAFT Option Description 35 SERIES HYDRAULIC POST HOLE DIGGER /16" Round Output Shaft 431 $2, FOR 2 9/16 ROUND OUTPUT SHAFTS YOU MAY CHOOSE ONE AUGER 10 9" Double Flight Auger 70 $ LP A 13 12" Double Flight Auger 98 $ LP A 16 15" Double Flight Auger 119 $ LP A 19 18" Double Flight Auger 131 $ LP A 25 24" Double Flight Auger 214 $ LP A 27 24" Tree Auger 162 $ LP A 31 30" Double Flight Auger 285 $1, LP A 33 30" Tree Auger 236 $1, LP A 37 36" Double Flight Auger 380 $1, LP A 39 36" Tree Auger 305 $1, LP A Complete revision March 1, Page 19-4

51 AP SERIES ATTACHMENTS AUGERS (continued) SERIES HYDRAULIC POST HOLE DIGGER 2" Hex Output Shaft 435 $2, FOR 2 HEX OUTPUT SHAFTS 09 9" Double Flight Auger 70 $ LP A 12 12" Double Flight Auger 98 $ LP A 15 15" Double Flight Auger 119 $ LP A 18 18" Double Flight Auger 131 $ LP A 24 24" Double Flight Auger 214 $ LP A 26 24" Tree Auger 162 $ LP A 30 30" Double Flight Auger 285 $1, LP A 32 30" Tree Auger 235 $1, LP A 36 36" Double Flight Auger 380 $1, LP A 38 36" Tree Auger 305 $1, LP A Complete revision March 1, Page 19-5

52 AP SERIES ATTACHMENTS ANGLE BROOMS Hydraulic GPM Range: GPM Rated Flow Standard Motor: RPM Minimum Hydraulic Flow Req.: 12 PSI Sweeping Width: 72", 84" Sweeping 30 Degree Max. Angle: 64", 76" Overall Height: 33" approx. Brush Diameter: 32" Brush Rotor Shaft: Quick Change Broom Core with No Hydraulic Breakage in Changeover Hex Drive System: Replaceable Brush Bristle: 100% Poly or 100% Metallic or 50/50 Hood: Sheet Metal Jack Stands: Standard Angling: Manual Angling 30 Deg Left or Right or Hydraulic Angling Float Control: Spring Loaded w/adjustable Down Pressure & Stops Brush Speed Range: RPM Hydraulic Hoses Hydraulic Couplers Additional Accessories: Metal Shroud Extension Dust Suppression System Marker Indicators Rubber Dust Deflector HIGH FLOW: Allows higher GPM units to be used by diverting excess GPM (above 25 GPM) back to the tank. FREE FREIGHT ON EACH ATTACHMENT GREATER THAN $7500 (LIST) COMPATIBILITY CHART Kubota Model Description SVL75-2 SVL90-2 SVL95-2s SSV65 SSV75 AP-AB72 Narrow Track 72" Angle Broom, 18 GPM Only X 72" Angle Broom, 25 GPM w/ High Flow High Flow Only 84" Angle Broom, 18 GPM X X AP-AB84 84" Angle Broom, 25 GPM X X X 84" Angle Broom, 25 GPM w/ High Flow High Flow Only High Flow Only AP-AB72 72" Angle Broom, GPM & > 25 GPM 1022 $2, YOU MUST CHOOSE ONE ANGLING FEATURE FOR GPM (Std Flow) 01 Standard Flow w/hydraulic Angling 15 $1, Standard Flow w/manual Angling 10 $ FOR 25 GPM AND ABOVE ONLY 03 High Flow w/hydraulic Angling - 15 $1, Must use Option High Flow w/manual Angling - 10 $ Must use Option -24 YOU MUST CHOOSE ONE BROOM ASSEMBLY 14 Poly Bristles included $1, Wire Bristles included $1, Poly/Wire Bristles included $1, YOU MUST CHOOSE ONE HYDRAULIC DRIVE MOTOR 18 cu. in Hydraulic Motor - 18 GPM and included $ below psi (For use with Option 01 or 02) 23 cu. in. Hydraulic Motor - 19 GPM and included $ above psi (For use with Options 03, 04) Complete revision March 1, Page 19-6

53 AP SERIES ATTACHMENTS ANGLE BROOMS (continued) YOU MAY CHOOSE ONE OF THE FOLLOWING FRONT DEFLECTORS 31 Metal Shroud Extension w/rubber Dust Deflector 59 $ LP A 32 Metal Shroud Extension Only 37 $ LP A YOU MAY CHOOSE ONE OF THE FOLLOWING OPTIONS 41 Marker Indicators (helps you locate front corners of unit) 3 $43.18 LP A 51 Dust Suppression System (uses water) $ LP A 52 Hose and Spray Kit $ LP A YOU MUST CHOOSE ONE OF THE FOLLOWING WIRING HARNESSES Pin Wiring Harness, DEUTSCH 2 $ HD30, 73" LP A Pin Wiring Harness, DEUTSCH HD30, 10' 2 $ LP A 62 2 Pin Wiring Harness, DTP 2 $ LP A 63 Switch and Wiring Harness 2 $ LP A 64 Switch and Wiring Harness Tractor Mount 2 $ LP A AP-AB84 84" Angle Broom, GPM & > 25 GPM 1022 $2, YOU MUST CHOOSE ONE ANGLING FEATURE FOR GPM (Std Flow) 01 Standard Flow w/hydraulic Angling 15 $1, Standard Flow w/manual Angling 10 $ FOR 25 GPM AND ABOVE ONLY 03 High Flow w/hydraulic Angling - 15 $1, Must use Option High Flow w/manual Angling - 10 $ Must use Option -24 YOU MUST CHOOSE ONE BROOM ASSEMBLY 14 Poly Bristles included $1, Wire Bristles included $1, Poly/Wire Bristles included $1, YOU MUST CHOOSE ONE HYDRAULIC DRIVE MOTOR 18 cu. in Hydraulic Motor - 18 GPM and 23 below psi (For use with Option 01, 02, ) included $ cu. in. Hydraulic Motor - 19 GPM and above psi (For use with Option 01, 02, 03, 04) Max Flow is 25 gpm with included $ options 01 & 02) Complete revision March 1, Page 19-7

54 AP SERIES ATTACHMENTS ANGLE BROOMS (continued) YOU MAY CHOOSE ONE OF THE FOLLOWING FRONT DEFLECTORS 31 Metal Shroud Extension w/rubber Dust Deflector 59 $ LP A 32 Metal Shroud Extension Only 37 $ LP A YOU MAY CHOOSE ONE OF THE FOLLOWING OPTIONS 41 Marker Indicators (helps you locate front corners of unit) 3 $43.18 LP A 51 Dust Suppression System (uses water) $ LP A 52 Hose and Spray Kit $ LP A YOU MUST CHOOSE ONE OF THE FOLLOWING WIRING HARNESSES Pin Wiring Harness, DEUTSCH HD30, 73" 2 $ LP A Pin Wiring Harness, DEUTSCH HD30, 10' 2 $ LP A 62 2 Pin Wiring Harness, DTP 2 $ LP A 63 Switch and Wiring Harness 2 $ LP A 64 Switch and Wiring Harness Tractor Mount 2 $ LP A Complete revision March 1, Page 19-8

55 AP SERIES ATTACHMENTS CLAW GRAPPLES AP-SGC20 Series Closed Height: 39" Number of Bottom Teeth: 12, 14 Number of Top Teeth: 11, 13 Spacing of Teeth: 6" Tooth Thickness: 1/2" Working Length of Teeth: 15" Hydraulic Cylinder: 2 Qty, 3" x 10" x 1 1/4" Rod Max. Jaw Opening: 50" Tine Material: High Tensile AR400 *Does not include hoses or fitting FREE FREIGHT ON EACH ATTACHMENT GREATER THAN $7500 (LIST) COMPATIBILITY CHART Kubota Model Description SVL75-2 SVL90-2 SVL95-2s SSV65 SSV75 AP-SGC " Claw Grapple, Heavy Duty X X X AP-SGC " Claw Grapple, Heavy Duty X X AP-SGC " Claw Grapple, 74" working width, HEAVY DUTY 907 $4, with AR400 Steel AP-SGC " Claw Grapple, 86" working width, HEAVY DUTY 907 $4, with AR400 Steel FOR ANY GRAPPLE YOU MUST ADD THE BUNDLE BELOW 11 Hoses & Flat Face Fitting Bundle 76" 20 $ Complete revision March 1, Page 19-9

56 AP SERIES ATTACHMENTS ROCK GRAPPLES Closed Height: 30 3/4" Number of Bottom Teeth: 21, 23, 25 Spacing of Teeth: 3" Tooth Thickness: 3/8" Working Length of Teeth: 38" Hydraulic Cylinder: 2" x 8" x 1 1/4" Rod Max. Jaw Opening: 37" Tine Material: High Strength Grade 80 Material *Does not include hoses or fitting FREE FREIGHT ON EACH ATTACHMENT GREATER THAN $7500 (LIST) COMPATIBILITY CHART Kubota Model Description SVL75-2 SVL90-2 SVL95-2s SSV65 SSV75 Narrow Track AP-SGR " Rock Grapple X Only AP-SGR " Rock Grapple X X X AP-SGR " Rock Grapple X X X AP-SGR " Rock Grapple 724 $2, AP-SGR " Rock Grapple 775 $2, AP-SGR " Rock Grapple 809 $2, FOR ANY ROCK GRAPPLE YOU MUST ADD THE BUNDLES BELOW 01 Upper Grapple 145 $1, Hoses & Flat Face Fitting Bundle 95" 20 $ FOR ANY ROCK GRAPPLE YOU MAY ADD THE BUNDLE BELOW 21 Hydraulic Cylinder Shields - 2 each 34 $ LP A Complete revision March 1, Page 19-10

57 AP SERIES ATTACHMENTS ROCK BUCKETS Height: 21 1/2" Number of Teeth: 21, 23, 25 Spacing of Teeth: 3" Tooth Thickness: 3/8" Working Length of Teeth: 38" Tine Material: High Strength Grade 80 Material FREE FREIGHT ON EACH ATTACHMENT GREATER THAN $7500 (LIST) COMPATIBILITY CHART Kubota Model Description SVL75-2 SVL90-2 SVL95-2s SSV65 SSV75 AP-SRB " Rock Bucket X Narrow Track Only AP-SRB " Rock Bucket X X X AP-SRB " Rock Bucket X X X AP-SRB " Rock Bucket 523 $1, AP-SRB " Rock Bucket 566 $1, AP-SRB " Rock Bucket 612 $1, MUST BE ED AS TWO PACKS, SAME SIZE - IS FOR ONE EACH Complete revision March 1, Page 19-11

58 AP SERIES ATTACHMENTS MANURE GRAPPLES Hydraulic Cylinder Shield Closed Height: 33" Number of Bottom Spears: 9, 9, 10 Number of Top Teeth: 4 Spacing of Spears: 7 1/2", 8 1/4", 8" Spear Diameter: 1 3/8" Working Length of Spears: 30" Hydraulic Cylinder: 2" x 8" x 1 1/4" Rod Max. Jaw Opening: 40" *Does not include hoses or fitting FREE FREIGHT ON EACH ATTACHMENT GREATER THAN $7500 (LIST) COMPATIBILITY CHART Kubota Model Description SVL75-2 SVL90-2 SVL95-2s SSV65 SSV75 AP-SGM " Manure Grapple X Narrow Track Only AP-SGM " Manure Grapple X X X AP-SGM " Manure Grapple X X X AP-SGM " Manure Grapple 488 $1, AP-SGM " Manure Grapple 514 $1, AP-SGM " Manure Grapple 545 $2, FOR ANY MANURE GRAPPLE YOU MUST ADD THE BUNDLES BELOW 01 Upper Grapple 120 $ Hoses & Flat Face Fitting Bundle 95" 20 $ YOU MAY ADD THE FOLLOWING OPTION 21 Hydraulic Cylinder Shield 17 $45.97 LP A Complete revision March 1, Page 19-12

59 AP SERIES ATTACHMENTS PALLET FORKS PFL45 Series Pallet Forks Fork Dimensions: 48"L x 1 1/2"D x 4"W Fork Position Lock: Spring Loaded Toggle Frame Size: 46"W x 38 1/2"H Fork Size: 1 1/2" x 4" ITA Class II Adjustable Fork Width: 8"-44" Skid Resistant Step PFL55 Series Pallet Forks Fork Dimensions: PFL5548: 48"L x 1 3/4"D x 4" W PFL5560: 60"L x 1 3/4"D x 4" W Fork Position Lock: Spring Loaded Toggle Frame Size: 46"W x 37"H Fork Size: 1 3/4" x 4" ITA Class II Adjustable Fork Width: 8"-44" Skid Resistant Step FREE FREIGHT ON EACH ATTACHMENT S GREATER THAN $7500 (LIST) COMPATIBILITY CHART Kubota Model Description SVL75-2 SVL90-2 SVL95-2s SSV65 SSV75 AP-PFL " Pallet Forks, 4500 lbs Capacity X X X X X AP-PFL " Pallet Forks, 5500 lbs Capacity X X X X X AP-PFL " Pallet Forks, 5500 lbs Capacity X X X X X AP-PFL " Pallet Forks, 4500 lbs Capacity 460 $1, YOU MUST ADD ONE OF THESE TWO TO EVERY 93 Packed in Qty of 3 same size units ADD $ Quantity Less than 3 units, or those not included in multiples of 3 ADD $57.01 AP-PFL " Pallet Forks, 5500 lbs Capacity 448 $1, YOU MUST ADD ONE OF THESE TWO TO EVERY 93 Packed in Qty of 3 same size units ADD $ Quantity Less than 3 units, or those not included in multiples of 3 ADD $57.01 AP-PFL " Pallet Forks, 5500 lbs Capacity 495 $1, YOU MUST ADD ONE OF THESE TWO TO EVERY 93 Packed in Qty of 3 same size units ADD $ Quantity Less than 3 units, or those not included in multiples of 3 ADD $57.01 Complete revision March 1, Page 19-13

60 AP SERIES ATTACHMENTS POWER RAKES Float Lock Hydraulic Driven Bi-directional Material Control Deflector: 2 each - 1/2" x 5" Hard Urethane Roller: 9 3/8" Diameter with 3/4" x 11/2" Carbide Tipped Studs Roller Bearings at Roller Ends Roller Speed: gpm Drive Chain: #50 Double Continuous Roller Chain High Tensile, Enclosed in Oil Bath Angle Adjustment: 22 Degrees Left & 18 Degrees Right, Forward or Reverse Angle Cylinder: 2" x 8" End Plates with Storage Pins Gauge Wheels: 16.5" x 6.5" Air Tires with Sealant & 3/4" Roller Bearings and Spacer Height Adjustment Replaceable Skid Shoes FREE FREIGHT ON EACH ATTACHMENT S GREATER THAN $7500 (LIST) COMPATIBILITY CHART Kubota Model Description SVL75-2 SVL90-2 SVL95-2s SSV65 SSV75 AP-SR " Power Rake, 12-19GPM X X X AP-SR " Power Rake, 15-23GPM X X X AP-SR " Power Rake, GPM 707 $8, Straight Working Width-82-1/2" Angled Working Width-72-1/2" YOU MUST ADD THE ROLLER ASSEMBLY 21 Stud Roller Assembly for 72" Weldment INC $1, YOU MUST CHOOSE ONE OF THE FOLLOWING WIRING HARNESSES Pin Wiring Harness, DEUTSCH 2 $ HD30, 10' LP A 62 2 Pin Wiring Harness, DTP 2 $ LP A 63 Switch and Wiring Harness 2 $ LP A YOU MUST ADD THIS AFTER THE WIRIING HARNESS PSI Hyd Hoses & Valve $0.00 Complete revision March 1, Page 19-14

61 AP SERIES ATTACHMENTS POWER RAKES (continued) AP-SR " Power Rake, GPM 707 $9, Straight Working Width-100" Angled Working Width-90" YOU MUST ADD THE ROLLER ASSEMBLY 21 Stud Roller Assembly for 90" Weldment $1, YOU MUST CHOOSE ONE OF THE FOLLOWING WIRING HARNESSES Pin Wiring Harness, DEUTSCH HD30, 10' 2 $ LP A 62 2 Pin Wiring Harness, DTP 2 $ LP A 63 Switch and Wiring Harness 2 $ LP A YOU MUST ADD THIS AFTER THE WIRIING HARNESS PSI Hyd Hoses & Valve $0.00 Complete revision March 1, Page 19-15

62 AP SERIES ATTACHMENTS ROTARY CUTTERS Cutting Height: 1.5 to 18 infinitely variable Cutting Width: 60 or 72" Overall Width: 60: 65-1/2 72: 78" Overall Length: 60: 73 72: 91" Cutting Capacity: 2 Diameter Blade Rotation: Clockwise Blades & Blade Carrier: ½ x 4 Updraft, Heavy Duty Round Pan Stump Jumper Hitch: Skid Steer Adjustable to Center or 8 1/2" Right Offset Deck Design Construction: Deck: 10 Gauge Side Skirt Construction: ¼ Steel Rear Deck Protection: Double Row Chain Guard, Standard Eq. Deck Lift Height Protection: Safety Chain Limiter Deck Wear Protection: Optional Four Corner Mounted Skid Shoes Cutting Height Gauging: Optional Pivoting & Adjustable Front Mounted Gauge Wheel w/ Laminated Tire Maximum Operating Pressure: 3000 psi Low Volume Drive Motors: For hyd. systems with GPM flow at PSI; (60" only) Medium Volume Drive Motors: For hyd. systems with GPM flow at PSI; High Volume Drive Motors: For hyd. systems with GPM flow at PSI; Low Volume Motor Blade Tip AP-SC2560: FPM; AP-SC2572: FPM Med. Volume Motor Blade Tip 32 GPM AP-SC2560: FPM; AP-SC2572: FPM High Volume Motor Blade Tip 42 GPM AP-SC2560: FPM; AP-SC2572: FPM Hydraulic Hose Length: 80" Standard FREE FREIGHT ON EACH ATTACHMENT GREATER THAN $7500 (LIST) COMPATIBILITY CHART Kubota Model Description SVL75-2 SVL90-2 SVL95-2s SSV65 SSV75 60" Rotary Cutter, GPM X X X X X AP-SC " Rotary Cutter, GPM High Flow Only High Flow Only High Flow Only High Flow Only 60" Rotary Cutter, GPM X X 72" Rotary Cutter, GPM X X X X X AP-SC " Rotary Cutter, GPM High Flow Only High Flow Only High Flow Only High Flow Only 72" Rotary Cutter, GPM X X UNIT MUST BE EQUIPPED WITH FRONT DOOR TO PROTECT OPERATOR AP-SC2560 Rotary Cutter, 60" Width 1084 $3, YOU MUST CHOOSE ONE HYDRAULIC DRIVE MOTOR Single Front Chain Guard Double Rear chain Guard AP-SC2572 Rotary Cutter, 72" Width 1427 $4, Single Front Chain Guard Double Rear chain Guard YOU MAY CHOOSE A GUAGE WHEEL 01 Single Gauge Wheel - Front Mounted 129 $ LP A YOU MUST CHOOSE A HYDRAULIC MOTOR ASSEMBLY 14 Hydraulic Motor, GPM INC $1, Hydraulic Motor, GPM INC $1, Hydraulic Motor, GPM INC $1, YOU MAY CHOOSE A SKID SHOE OPTION 41 Skid Shoes - Four Corners 1/4" x 2 10 $32.57 LP A 42 Heavy Duty Skid Shoes - Four Corners 21 $ /8"x3" LP A Complete revision March 1, Page 19-16

63 AP SERIES ATTACHMENTS ROTARY TILLERS Color: Black Tilling Depth: 5.5, 4, and 2 Rotor Diameter: 18.3" Rotor Speed: SRT62 LOW flow motor RPM SRT62 HIGH flow motor RPM SRT76 HIGH flow motor RPM Recommended Hydraulic Pressure SRT62 LOW flow motor gpm: minimum 2800 psi / max of 4500 psi SRT62 HIGH flow motor gpm: minimum 2000 psi / max of 4500 psi SRT76 HIGH flow motor gpm: minimum 2300 psi / max of 4500 psi Rotor RPM Tines: Forged, Hardened, Bi-Directional, C -Shape, 4 per Flange Shanks: 3/4 x 2.5 x 16 Steel; Standard 62: 5 Shanks with retaining clips, Standard 76: 6 Shanks with retaining clips, Standard Patent Pending Level Indicator FREE FREIGHT ON EACH ATTACHMENT GREATER THAN $7500 (LIST) COMPATIBILITY CHART Kubota Model Description SVL75-2 SVL90-2 SVL95-2s SSV65 SSV75 AP-SRT62 62" Rotary Tiller, GPM X X X 62" Rotary Tiller, GPM High Flow Only High Flow Only AP-SRT76 76" Rotary Tiller, GPM High Flow Only High Flow Only High Flow Only High Flow Only AP-SRT62 62" Rotary Tiller 850 $2, YOU MUST CHOOSE ONE HYDRAULIC DRIVE MOTOR 10 Low Flow Motor, gpm included $1, High Flow Motor, gpm included $1, YOU MUST ADD THE 1/2" COUPLERS 20 1/2" Flat Faced Couplers 2 $ /4" Flat Faced Couplers 2 $ YOU MUST ADD THIS AFTER THE COUPLERS 50 Shanks w/clips 62" BNDL included $ AP-SRT76 76" Rotary Tiller, 6 Shanks, gpm HIGH FLOW ONLY 921 $5, YOU MUST CHOOSE ONE COUPLER SIZE 20 1/2" Flat Faced Couplers 2 $ /4" Flat Faced Couplers 2 $ YOU MUST ADD THIS AFTER THE COUPLERS 50 Shanks w/clips 76" BNDL included $ Complete revision March 1, Page 19-17

64 AP SERIES ATTACHMENTS SNOW BLADES Moldboard Construction: Steel Moldboard Thickness: 10 Gauge Moldboard Height: 32" Cut 30 Deg Maximum Angle: 96: 83"; 108: 93" Hydraulic Angling: Double-Acting Cylinder & Hoses Adjustable Spring-loaded Trip Edge Protection Blade Depth: 41" Approx Mounting Steps: Serrated Skid Shoes Carrier Lift Capacity: Less than 5,000 lbs. Carrier Max Operating Weight: Less than 8,000 lbs. Carrier Max Hyd. Output Pressure: 3500 psi max. Rated Max. Pressure Rating-Hoses & Fittings: 4,000 psi Replaceable Bottom Wear Edge: 1/2" x 6" Steel or Poly Optional Blade Marker Optional Top Mounted Rubber Deflector FREE FREIGHT ON EACH ATTACHMENT GREATER THAN $7500 (LIST) COMPATIBILITY CHART Kubota Model Description SVL75-2 SVL90-2 SVL95-2s SSV65 SSV75 AP-TB " Trip Edge Blade X X X X X AP-TB " Trip Edge Blade X X X AP-TB " Trip Edge Blade 555 $3, Straight Working Width-96" Angled Working Width-83 1/4" YOU MUST CHOOSE ONE WEAR EDGE 01 Steel Wear Edge 70 $ LP A 02 Poly Wear Edge 10 $ LP A YOU MAY CHOOSE ANY OF THE FOLLOWING OPTIONS 11 Blade Marker 5 $43.18 LP A 21 Top Rubber Deflector Shield 7 $58.49 LP A AP-TB " Trip Edge Blade 555 $3, Straight Working Width-108" Angled Working Width-93 1/2" YOU MUST CHOOSE ONE WEAR EDGE 01 Steel Wear Edge 78 $ LP A 02 Poly Wear Edge 11 $ LP A YOU MAY CHOOSE ANY OF THE FOLLOWING OPTIONS 11 Blade Marker 5 $43.18 LP A 21 Top Rubber Deflector Shield 5 $60.70 LP A Complete revision March 1, Page 19-18

65 AP SERIES ATTACHMENTS SNOW BLOWERS Working Width : 66", 74", 84" Hitch: Skid/Loader Plate Main Housing Material: 10 Gauge Side Plate Material: 3/16" Impeller: 24" Diameter Impeller Housing Depth: 66 & 74: 8", 84: 10" Impeller Blades: 4 Auger: 16" Diameter Auger Paddles: 4 Chute Opening at Base: 66 & 74: 10", 84: 12" Chute Rotation: Sprocket Type; Hydraulic Chute Deflector Operation: Hydraulic Optional Motors: Low, Med., or High Flow Skid Shoes: Outer, Bolt-on, Adjustable & Replaceable FREE FREIGHT ON EACH ATTACHMENT GREATER THAN $7500 (LIST) COMPATIBILITY CHART Kubota Model Description SVL75-2 SVL90-2 SVL95-2s SSV65 SSV75 AP-SBL2566 Narrow Track 66" Snow Blower, GPM Only X 66" Snow Blower, GPM High Flow Only AP-SBL " Snow Blower, GPM X X X 74" Snow Blower, GPM High Flow Only High Flow Only 84" Snow Blower, GPM X AP-SBL " Snow Blower, GPM X X X 84" Snow Blower, GPM High Flow Only High Flow Only High Flow Only AP-SBL " Snow Blower 863 $4, AP-SBL " Snow Blower 894 $4, AP-SBL " Snow Blower 940 $5, FOR EACH SNOW BLOWER: YOU MUST CHOOSE A HYDRAULIC MOTOR 10 HYDRAULIC MOTOR GPM 20 $1, HYDRAULIC MOTOR GPM 20 $1, (AP-SBL2584 ONLY) 12 HYDRAULIC MOTOR GPM 20 $1, YOU MUST CHOOSE COUPLERS 20 1/2" Flat Face Couplers 1 $ /4" Flat Face Couplers 1 $ (AP-SBL2584 ONLY) YOU MUST CHOOSE A WIRE HARNESS Pin Wiring Harness 3 $ Pin Wiring Harness 3 $ (includes control box) YOU MUST CHOOSE THE CASE DRAIN 40 Flat Face Fitting Package 10 $42.81 Complete revision March 1, Page 19-19

66 AP SERIES ATTACHMENTS SNOW BLOWERS (continued) YOU MUST CHOOSE A SKID SHOE 50 Outer Skid Shoes AP-SBL $ LP K 50 Outer Skid Shoes AP-SBL2574 / 8 $ AP-SBL84 LP K 51 Inner Skid Shoes 15 $ LP K Complete revision March 1, Page 19-20

67 AP SERIES ATTACHMENTS SNOW PUSHERS Working Width: 72", 84", 96" Carrier Lift Capacity: Less than 2,000 lbs Carrier Max Operating Width: Less than 5,000 lbs Moldboard Height: 30" Moldboard Thickness: 10 Gauge Side Panels w/supports: 1/4" Plate Blade Depth: 29" Replaceable Bottom Wear Edge: 1" x 8" Rubber w/slotted Hole or 1/2" x 6" 1045 Steel Mounting Steps: Serrated, on hitch Skid Shoe: AR400, 1/2" x 4" Reversible, Adjustable Optional Pull Back Blade with 1" x 8" Rubber Wear Edge FREE FREIGHT ON EACH ATTACHMENT GREATER THAN $7500 (LIST) COMPATIBILITY CHART Kubota Model Description SVL75-2 SVL90-2 SVL95-2s SSV65 SSV75 AP-SSP " Snow Pusher X X X AP-SSP " Snow Pusher X X X X X AP-SSP " Snow Pusher X X X X X AP-SSP " Snow Pusher, Heavy Duty X X X X X AP-SSP " Snow Pusher 558 $1, YOU MUST CHOOSE ONE WEAR EDGE 01 Rubber Wear Edge 48 $ LP A 02 Steel Wear Edge 62 $99.30 LP A YOU MAY CHOOSE A BACK-DRAG OPTION 10 72" Pull Back Blade 198 $ LP A AP-SSP " Snow Pusher 603 $1, YOU MUST CHOOSE ONE WEAR EDGE 01 Rubber Wear Edge 56 $ LP A 02 Steel Wear Edge 73 $ LP A YOU MAY CHOOSE A BACK-DRAG OPTION 10 84" Pull Back Blade 221 $ LP A AP-SSP " Snow Pusher 645 $2, YOU MUST CHOOSE ONE WEAR EDGE 01 Rubber Wear Edge 65 $ LP A 02 Steel Wear Edge 83 $ LP A YOU MAY CHOOSE A BACK-DRAG OPTION 10 96" Pull Back Blade 245 $ LP A Complete revision March 1, Page 19-21

68 AP SERIES ATTACHMENTS SNOW PUSHERS (continued) AP-SSP " Snow Pusher, Heavy Duty 887 $2, YOU MUST CHOOSE ONE WEAR EDGE 01 Rubber Wear Edge 77 $ LP A 02 Steel Wear Edge 83 $ LP A YOU MAY CHOOSE ONE OF THE FOLLOWING OPTIONS 10 96" Pull Back Blade 300 $ LP A 11 End Panel Braces $ LP A Complete revision March 1, Page 19-22

69 AP SERIES ATTACHMENTS STUMP GRINDER Overall Mounting Width: 48" Overall Length (w/o Shielding): 60" Drive System: Hydraulic Motor w/electric over Hydraulics Hydraulic Requirements: gpm Angle & Lift Cylinders: 3" x 6" Stroke w/1-1/4" Rod Diameter Hydraulic Lines & Hoses: 3/4" Cutting Wheel: 1/2" Thick x 24" Diameter w/carbide Teeth Number of Carbide Teeth: 32 Cutting Wheel Speed: gpm Cutting Arc: 55 Degrees Max Cutting Depth: 8" Greasable Hinge Points: Yes Main Frame: 6" x 6" x 1/4" Tube FREE FREIGHT ON EACH ATTACHMENT GREATER THAN $7500 (LIST) COMPATIBILITY CHART Kubota Model Description SVL75-2 SVL90-2 SVL95-2s SSV65 SSV75 AP-SSG " Stump Grinder, GPM X X X X X AP-SSG " Stump Grinder, GPM 650 $6, YOU MUST CHOOSE COUPLER SIZE 20 1/2" Flat Face Couplers $ YOU MUST CHOOSE ONE WIRING HARNESS 31 Control Harness $ LP A Pin Wiring Harness $ LP A 35 2 Pin Wiring Harness $ LP A YOU MUST ADD THIS AFTER WIRIING HARNESS 90 Flat Face Case Drain Fitting $44.96 Complete revision March 1, Page 19-23

70 AP SERIES ATTACHMENTS TREE PULLER Color: Black Cylinder: 2 x8 x1 Welded Stout Square Tube Frame Pincher: 16 x 2 3/4 x 5/8 Pivot Pin: 2 1/2 Solid, Greasable Mouth Opening: 10 Cylinder Guard: 3/16, Included Small Flat Faced Couplers Included FOR USE ON SSV65 MODELS ONLY FREE FREIGHT ON EACH ATTACHMENT GREATER THAN $7500 (LIST) COMPATIBILITY CHART Kubota Model Description SVL75-2 SVL90-2 SVL95-2s SSV65 SSV75 AP-STP15 Tree Puller X AP-STP15 Tree Puller with 1/2" Flat Faced Couples 290 $1, Complete revision March 1, Page 19-24

71 AP SERIES ATTACHMENTS SKID STEER HITCH Color: Black Adjusts for Cat. 1 or 2 non-pto implements Adjustable Top Hook Automatic Lock on Lower 3-Point Class II Receiver and Storage Rack for Ball Hitch Width: 46 3/8" Height: 25" FREE FREIGHT ON EACH ATTACHMENT GREATER THAN $7500 (LIST) COMPATABILITY CHART Kubota Model Description SVL75-2 SVL90-2 SVL95-2s SSV65 SSV75 AP-SH35 Skid Steer Hitch X X X X X AP-SH35 Skid Hitch 278 $1, Complete revision March 1, Page 19-25