1 WJS-3500 User Guide MIGHTY JUMP STARTER Portable Jump Start & Power Supply
2 Welcome Thank you for choosing a Whistler product. We are dedicated to providing products that represent both quality and value. Please read the User Guide carefully before using this product. If you have additional questions, please visit the FAQ page on our website at or call Toll Free (800) / Tel (479) , 8am to 5pm CT, Monday through Friday to speak to a Customer Service Representative. Packing List Jump Starter Premium Protection Cables 12V DC Car Adapter Home AC Adapter Zipper Storage Case User Guide Feature Description PRODUCT LAYOUT LED Power Indicator Lights Power Button Flashlight 12V DC OUT HIGH CURRENT Jump Start Port 12V DC IN Charging Port 2.1A USB Output 2
3 3 WARNINGS AND SAFETY GUIDELINES Please read these safety instructions, operating instructions, and warnings before charging or using the jump starter. Explosion Hazard - USE ONLY IN WELL VENTILATED AREAS. The jump start cable clamps MUST be connected in correct polarity ~ RED clamp to the battery Positive (+) and BLACK clamp to the battery Negative (-) terminals, making sure they have a good connection. A reverse polarity connection (positive to negative) can cause damage to the jump starter and/or create a sparking/ explosion hazard. Fire Hazard - Do not crush, puncture or damage the jump starter. Never allow the jump start clamps to touch each other or another common metal conductor. This could cause damage to the unit and/or create a fire hazard. Always disconnect the jump start cables from the jump starter after each use and store separately. Burn Hazard - Keep away from children. Do not insert foreign objects into the jumper cables port/jack, the USB output port, or the DC input jack. Do not expose this product to water, rain, snow, (cont.)
4 WARNINGS AND SAFETY GUIDELINES 4 condensation, or spray. Do not open the jump starter to replace the internal battery. There are no user replaceable parts inside the jump starter. Additional Warnings 1. Keep the unit clear of fire and water. 2. USE ONLY THE WHISTLER PREMIUM PROTECTION CABLES. Use of other cables may result in damage to the jump starter, fire, personal injury and damage to vehicle or property. 3. If at any time you witness the jump starter starting to swell, smoke, or become hot to the touch, DISCONNECT THE JUMP STARTER AND DISCONTINUE USE IMMEDIATELY. Move the jump starter to a safe place away from combustible materials and safely observe it for approximately 15 minutes as a battery can still ignite after 10 minutes.
5 CAUTION-PLEASE READ 5 Cautions 1. This jump starter is intended for use on a discharged, but otherwise capable battery. It will not work on a battery that has developed a shorted cell or become damaged. If your vehicle cannot be jump started, have the battery tested and/or replaced. 2. Before attempting to start 12V vehicle, please make sure at least 3 LED lights are illuminated on the jump starter when pressing the power button. 3. Always use the jump starter in a well ventilate area and keep the jump starter away from children, fire, water, explosive gasses, and combustible materials. 4. DO NOT CRANK IGNITION FOR MORE THAN 3 SECONDS. Cranking for more than 3 seconds may cause damage to the unit. If vehicle does not start, wait 1 minute before trying again. The jump-start feature is designed for short term operation only. 5. If the jump starter becomes warm to the touch during use, disconnect the jump starter from the cables and allow to cool before reattempting to start the vehicle.
6 CAUTION-PLEASE READ 6 6. When charging the jump starter, please place on a hard surface and keep away from combustible materials. Please don t leave unattended while charging. If you have questions concerning the operation of your Whistler product, or require service during or after the warranty period, please call Customer Service at Toll Free (800) Tel (479)
7 7 BATTERY PRECAUTIONS 1. Lithium Polymer batteries are volatile. Failure to read and follow the use and operating instructions may result in fire, personal injury and damage to property if charged or used improperly. Li-Polymer battery may explode and cause fire if misused or defective. Please follow our jump starting instructions exactly which are listed in the User Guide, label on the jump starter and the information card included. 2. Never allow a metal tool to concurrently touch the positive and negative cable ends or battery terminals. 3. Be sure someone is close enough to come to your aid when working with batteries. 4. If you need to remove a vehicle battery, always remove the negative terminal from the battery first. Make sure all accessories are off so you don t cause an arc. 5. When working with lead-acid vehicle batteries, have ample water, soap and baking soda on hand in case of skin contact with battery acid. 6. The jump starter is supplied with an internal rechargeable Li-Polymer battery.
8 BATTERY PRECAUTIONS 8 This battery is self-contained and not consumer replaceable. Battery must be disposed of properly when it no longer holds a charge. Proper charging practices will increase the life of the batteries. For information on battery recycling, go to or contact them toll free at (automated system) or for customer service.
9 CHARGING 9 Charging the Jump Starter Plug the home adaptor into a V AC outlet of the proper plug type. Connect the other end of the home adaptor to the 12V DC IN Charging Port. -or- 1. Plug the car adaptor into the socket of the vehicle auxiliary power. 2. Connect the other end of the car adaptor to the 12V DC IN Charging Port. Indicator Lights Press the power button to check the level of the jump starter battery. Number of lights ON indicate percentage of charge available. (1=20%, 2=40%, 3=60%, 4=80%, 5=100%)
10 CHARGING 10 NOTES: 1. The jump starter should be charged before initial use. Place on a hard surface and keep away from combustible materials. Please don t leave unattended while charging. 2. A minimum of 3 indicator lights must be illuminated before attempting to jump start a vehicle. 3. All 5 battery indicators will flash simultaneously and provide an audible beep if the input charging voltage is too low or too high. To properly charge this jump starter with the Car Charger, the DC input voltage should be 13.6 to 16 volts (Vehicle charging system when vehicle engine is running). 4. Periodic charging every 3-4 months is recommended when being stored for long periods of time. 5. When charging, the LED indicator lights will sequentially flash. The percentage of charge completed is indicated by the number of solid lights as charging progresses. The jump starter is fully charged when all lights are solid.
11 CHARGING If during charging the jump starter begins beeping and stops charging IMMEDIATELY DISCONNECT THE JUMP STARTER FROM POWER SUPPLY AND DISCONTINUE USE. Refer to FAQs. For Charging / Powering Devices Using USB Port 1. Plug the USB cable of the device into the USB output port of this jump starter. 2. Press the jump starter power button to initiate charging/ power to the attached device.
12 12 JUMP STARTING WARNING Explosion Hazard - USE ONLY IN WELL VENTILATED AREAS. The jump start cable clamps MUST be connected in correct polarity ~ RED clamp to the battery Positive (+) and BLACK clamp to the battery Negative (-) terminals, making sure they have a good connection. A reverse polarity connection (positive to negative) can cause damage to this jump starter and/or create a sparking/explosion hazard. USE ONLY THE WHISTLER PREMIUM PROTECTION CABLES. Use of other cables may result in damage to this jump starter, fire, personal injury and damage to vehicle or property. For Jump Starting 12V Vehicle 1. Before attempting to start a 12V vehicle, please make sure at least 3 LED lights are illuminated on this jump starter when pressing the power button. 2. Connect the Red clamp to the battery Positive (+) and Black clamp to the battery Negative (-) terminals, making sure they have a good connection. WARNING: REVERSING THE CONNECTIONS MAY RESULT IN DAMAGE TO THE JUMP STARTER, FIRE OR PERSONAL INJURY.
13 JUMP STARTING Insert the blue connector firmly into the jump start port. (If below 32º F/0º C, please allow a few minutes before starting the vehicle) 4. Start the vehicle. CAUTION: DO NOT CRANK IGNITION FOR MORE THAN 3 SECONDS. If vehicle does not start, wait 1 minute before trying again. 5. Once vehicle is started, unplug the blue connector from the jump starter, then remove the battery clamps. START
14 14 JUMP STARTING CAUTION: The jump start feature is designed for short term operation only. Turn the ignition key for no more than 3 seconds at a time. Operating the jump start feature for more than 3 seconds may cause damage to the unit. Allow the jump starter to cool down for at least 1 minute after each jump start attempt. CAUTION: NEVER press the cable RESET button before having the cables properly connected to the vehicle battery. Failure to follow proper connection sequence outlined in JUMP STARTING section of this manual MAY RESULT IN DAMAGE TO THE JUMP STARTER, TO THE VEHICLE, OR PERSONAL INJURY. Always disconnect the jump start cables from the jump starter after each use and store separately.
15 15 JUMP STARTING The Premium Protection Cables provided have a built-in feature that prevents cranking for more than 3 seconds and will automatically enter a 60 second rest period between cranking attempts (indicated by cable LED blinking GREEN). After 5 consecutive starting attempts, the Premium Protection Cables must be reset by pressing the RESET button before another starting attempt can be made. If this jump starter becomes warm to the touch, disconnect this jump starter from the cables and allow to cool before reattempting to start the vehicle. Please refer to Premium Protection Cables Operation for additional information.
16 Jump Starter Premium Protection Cable Operation LED Status Condition Description Action GREEN solid Jump starter voltage above 11V, vehicle battery above low limit threshold, and cable polarity correct. NOTE: If no starting attempt is made within 2 min. of connection to vehicle battery: a) light will remain GREEN. b) light will change to fast blinking AMBER (see below). c) light will change to solid AMBER (see below). Vehicle may now attempt to be started. GREEN blinking Starting current detected for maximum 3 seconds, then enters 60 second rest period, with no current output allowed. After 60 seconds, LED will indicate status. NOTE: If no starting attempt was made, cables detected a heavy load from vehicle system indicating a defective/damaged vehicle battery or vehicle system issue which must be resolved before using this jump starter. Have vehicle battery tested and/ or replaced. GREEN fast blinking After 5 consecutive starting attempts of 3 sec. cranking/60 sec. rest cycle, no current output allowed. Press RESET button to initiate another 5 starting attempt cycles.
17 Jump Starter Premium Protection Cable Operation (continued) AMBER solid Jump starter voltage is lower than 11V (3 bars or less on this jump starter). No current output allowed and RESET button disabled. Fully charge this jump starter before attempting to start vehicle. AMBER fast blinking Jump starter voltage is above 11V (3 bars or more on this jump starter), vehicle battery not detected. No current output allowed. NOTE: Clamps are not connected to vehicle battery or vehicle battery is below low limit threshold. Check for secure battery cable/clamp connections to vehicle battery. If AMBER light continues to fast blink, press RESET button for vehicle battery system check. NOTE: A vehicle battery below low limit threshold may need to be recharged or replaced. AMBER / GREEN alternating blinking Indicates 3 second vehicle battery system check in progress after pressing RESET button when properly connected to a vehicle battery. After system check, LED will return with system status confirmation. Refer to listed LED Status for further actions. RED fast blinking Jump starter voltage is above 11V, cables connected in reverse polarity or vehicle battery short detected. No current output allowed and RESET button disabled. Disconnect cables from this jump starter and remove clamps from vehicle battery. Connect clamps to vehicle battery in correct polarity (positive-topositive/negative-to-negative) and then reconnect cables to the jump starter to reset. NOTE: Source of problem must be resolved before reattempting to start vehicle using this jump starter.
18 18 FLASHLIGHT FUNCTION Flashlight LED Illumination Press and hold the power button for 3 seconds to initiate the flashlight. Once the flashlight is on, a press and release of the power button will change to an alternate mode of operation in the order listed below. To shut the flashlight off, you must cycle thru the selections. FLASHLIGHT BEACON STROBE SOS OFF
19 19 FREQUENTLY ASKED QUESTIONS Q. What will this jump starter jump start? A. This jump starter is for use on single battery 12V systems like GARDEN TRACTORS, ATV s, BOATS, MOTORCYCLES and PASSENGER VEHICLES. Q. How do I turn off the jump starter? A. This jump starter will power off automatically when no load or charging is detected Q. How many times can this jump starter charge my mobile phone? A. Approximately 4 to 7 times depending on the phone. Q. How long will this jump starter take to fully charge my mobile phone? A. 1-2 hours depending on the phone. Q. How many times can the fully charged jump starter start my vehicle? A. 10 times or more depending on the vehicle Q. How long will this jump starter hold a charge? A. Up to 1 year (refer to Charging Section in user guide).
20 20 FREQUENTLY ASKED QUESTIONS Q. Why does the jump starter stop charging and begin beeping? A. A problem was detected and has discontinued charging as a safety precaution. Press and hold the power button for seconds to force the continuation of charging and possibly correct the detected charging issue. After pressing and holding the power button, disconnect the charger from the wall and this jump starter to reset. Reconnect charger to allow the unit to begin charging normally HOWEVER - if after this process the unit again discontinues charging and begins to beep, IMMEDIATELY DISCONNECT THIS JUMP STARTER FROM POWER SUPPLY AND DISCONTINUE USE. NOTE: Pressing and holding the power button will cause the flashlight to turn ON which is normal. After disconnecting charger, the flashlight may be turned OFF before reconnecting. Q. How do I dispose of this jump starter when it reaches end of service life? A. This jump starter contains a rechargeable Lithium Polymer (LiPo) battery pack. This battery pack is selfcontained and is not replaceable. Refer to the Battery Precautions section of this user guide for battery disposal information.
21 21 SPECIFICATIONS SIZE: 130mm x 78mm x 31mm (5.1 x 3.0 x 1.2 ) WEIGHT: 354.4g (12.5oz.) BATTERY CAPACITY: mwh OUTPUT: 5V=2.1A; 12V=HIGH CURRENT INPUT: 14V 1A FULL CHARGING TIME: 3-4 hours STARTING CURRENT: 200A (< or = 3 seconds) PEAK CURRENT: 400A (inrush current) OPERATING TEMP (Charge): 0º~ 40º C (32º~ 104º F) OPERATING TEMP (Discharge): -20º~ 60º C (-4º~ 140º F) STORAGE TEMP: -10º ~ 30º C (14º~ 86º F) LIFETIME: >1000 Cycles depending on usage
22 22 LEDS FUNCTIONS 5 Bars = Fully charged ( 2 Red/1 Yellow/2 Green) * Note when fully charged all lights do not turn green 4 Bars = The Unit battery capacity remains good for most intended uses. 3 Bars = The Unit battery capacity remaining may not provide the necessary power for jumpstarting a vehicle (refer to User Guide). 1 to 2 Bars = The Unit does not contain sufficient power to provide a jump start and should be fully recharged before attempting to do so. The remaining battery capacity is very low and has limited capacity for charging a portable device and the Unit should be fully recharged. LED Power Indicator Lights
23 23 WARRANTY INFORMATION Consumer Warranty This Whistler product is warranted to the original purchaser for a period of one (1) year from the date of original purchase against all defects in materials and workmanship, when purchased from an authorized Whistler retailer. This limited warranty is void if the unit is abused, misused, modified, installed improperly, or if the housing and/or serial numbers have been removed. There are no express warranties covering this product other than those set forth in this warranty. All express or implied warranties for this product are limited to one (1) year. Whistler is not liable for damages arising from the use, misuse, or operation of this product including but not limited to loss of time, inconvenience, loss of use of your product or property damage caused by your product or its failure to work, or any other incidental or consequential damages including personal injury. DO NOT RETURN ITEM TO STORE WHERE PURCHASED. For warranty information, contact Whistler Customer Service at Toll Free (800) / Tel (479) Representatives are available to answer your questions Monday - Friday from 8:00 a.m. to 5:00 p.m. CT
24 24 WARRANTY INFORMATION Service Under Warranty During the warranty period, defective units will be repaired or replaced (with the same or a comparable model), at Whistler s option, without charge to the purchaser when returned prepaid, with dated proof of purchase to the address below. Units returned without dated proof of purchase will be considered out of warranty and therefore are not covered by the described Limited Warranty. (Refer to Service Out-of- Warranty section.) Due to the specialized equipment necessary for testing Whistler products, there are no authorized service centers other than Whistler. When returning a unit for service under warranty, please follow these instructions: 1. Ship the unit in the original carton or in a suitable sturdy equivalent, fully insured, with return receipt requested to: Whistler Repair Dept South 1st St. Rogers, AR Please allow 3 weeks turnaround time.
25 WARRANTY INFORMATION 25 IMPORTANT: Whistler will not assume responsibility for loss or damage incurred in shipping. Therefore, please ship your unit insured with return receipt requested. CODs will not be accepted! 2. Include with your unit the following information, clearly printed: Your name and physical street address for shipping (no PO Boxes), a daytime telephone number, and an address (if applicable). A detailed description of the problem (e.g., device will not power ON ). A copy of your dated proof of purchase or bill of sale. 3. Be certain your unit is returned with its serial number. Units without serial numbers are not covered under warranty. IMPORTANT: To validate that your unit is within the warranty period, make sure you keep a copy of your dated proof of purchase. For warranty verification purposes, a copy of your dated store receipt must accompany any Whistler product sent in for warranty work.
26 WARRANTY INFORMATION 26 Service Out-Of-Warranty Units will be repaired at out-of-warranty service rates when: The unit s original warranty has expired. A dated proof of purchase is not supplied. The unit has been returned without its serial number. The unit has been misused, abused, modified, installed improperly, or had its housing removed. The minimum out of warranty service fee for your Whistler jump starter is $50.00 (U.S.). If you require out of warranty service, please return your unit as outlined in the section Service Under Warranty along with a cashier s check or money order in the amount of $ Payment may also be made by MasterCard, VISA or American Express. Personal checks are not accepted. In the event repairs cannot be covered by the minimum service fee, you will be contacted by a Whistler technical service specialist who will outline options available to you.
27 WARRANTY INFORMATION 27 IMPORTANT: When returning your unit for service, be certain to include a daytime telephone number and an address (if applicable). Customer Service If you have questions concerning the operation of your Whistler product, or require service during or after the warranty period, please call Customer Service at Toll Free (800) Tel (479) Representatives are available to answer your questions Monday - Friday from 8:00 a.m. to 5:00 p.m. (CT) or visit the FAQs at
28 CORPORATE HEADQUARTERS 1716 SW Commerce Dr. Ste. 8 Bentonville, AR Toll Free (800) TEL (479) CUSTOMER RETURN CENTER 1412 South 1st St. Rogers, AR P/N A 12A The Whistler Group, Inc.
WJS-1800 User Guide MINI JUMP STARTER Portable Jump Start & Power Supply 2 PRODUCT LAYOUT Welcome Thank you for choosing a Whistler product. We are dedicated to providing products that represent both quality
Lemania/EnergyFlo Start booster X7 User Manual Always follow basic safety precautions and wear appropriate safety equipment when using electrical appliances and batteries. Read all instructions carefully.
52731 18 AMP-HOUR 12 VOLT OVERHEAT PROTECTION JUMP START OWNER S MANUAL PORTABLE POWER COMPACT & ROBUST 18 Amp-Hour, 12 Volt Wall charger 6-gauge booster cable Built in ultra-bright LED work light Safety
12V CAR JUMP STARTER and portable power bank AC56388 AC56388-60 / AC56388M-60 / AC56388F-60 User Manual PACKAGE CONTENTS: Power Bank Storage Case USB Cable and Car Adaptor User Manual Jumper Cable with
Item No. : 2467 300 Amp Battery Jumper User s Manual We are constantly improving our products so specifications are subject to change without notice. Visit our website for the latest product information.
installation and operating instructions for the following xtreme Battery chargers: Model Name No. of Banks Amps Per Bank Battery System Dual Pro SE Xtreme Dual Pro Xtreme Three Bank SE Xtreme Three Bank
OPERATING INSTRUCTIONS HALO BOLT 57720 Powerful, compact and easy to use, the HALO BOLT can safely jump start your car. In addition, you can use it to charge your phone, tablet or other electronic devices!
Safety, Installation And Operating Instructions For The Following Battery Charger Models: i2412, i3612, i4809, i2425, i3625, and i4818 IMPORTANT NOTICE: Please save and read these safety, operating and
INSTANT JUMPSTARTING POWER USER MANUAL Copyright PowerStation, LLC All rights reserved MODEL: PS1100 CONTENTS Warning Info 1 2 Introduction 3 Features 3 Getting to know your PS1100 4 5 Operation 6 Charging
Compact Jumpstart with Compressor Model No. JSM-0580 OWNER'S MANUAL Customer Service Tel: 1-800-268-3319 Superex Canada Limited, Toronto M2H 3B8 Made in China IMPORTANT SAFETY INSTRUCTIONS 1. SAVE THESE
AC/DC Powered Peak Detection Fast Charger for 4- to 8-Cell Ni-Cd & Ni-MH Batteries 2010 Horizon Hobby, Inc. 4105 Fieldstone Road Champaign, IL 61822 USA Dynamite products are distributed exclusively by
POWER PAK II / PLUS II MULTI FUNCTION JUMP STARTERS KP1405 & KP1406 ED2 (December 17) Table of Contents Know Your Product... 2 POWER PAK II Safety Instructions... 3-4 POWER PAK II Care & Charging... 5-6
OPERATOR S MANUAL Portable Power 950 Model No. 28.71987 Read and follow all Safety Rules and Operating Instructions before Every Use of this Product. Save these instructions. Sears Brands Management Corporation,
Automatic Battery Charger Switching mode with Micro-controlled Input:220-260Vac / Output: 12Volt DC User s Manual and Important Safety Information Model: OC-SW121080 / OC-SW121160 / OC-SW121210 FEATURES
MODEL # 2032 BOOST 200 6- In- 1 POWER SUPPLY with 200 WATT INVERTER 200W Power Inverter BOOST 200 6-in-1 POWER SUPPLY with 200W inverter Double Injection Rubberized handle 260 PSI Air Pressure Gauge Main
CBA Charge Controller www.westmountainradio.com 1020 Spring City Drive Waukesha, WI 53186 262-522-6503 email@example.com 2016, All rights reserved. All trademarks are the property of their respective
C O R P O R A T IO N O P E R A T I N G I N S T R U C T I O N S OBE, OBEXU, ON BOARD Battery Chargers INTRODUCTION: These chargers are designed for the permanent installation on battery powered vehicles
VEC022 Manual_Final_073106.qxp 7/31/06 6:36 PM Page 1 VEC022 Jump-Start System 12 VOLT DC POWER SUPPLY IF YOU SHOULD EXPERIENCE A PROBLEM WITH YOUR PURCHASE CALL TOLL FREE 866-584-5504. IN MOST CASES A
Twelve Unit Rapid Charger FOR RECHARGEABLE LMR BATTERIES User Manual Model TWC12M ENDURA TWC12M Table of Contents Topic Page Introduction 1 Important 2 Caution 2-3 Features 4-5 Replacing A Charging Pod
powerdriveinverters.com Owner s Guide Please Save for Future Reference 300 300 Watt DC to AC Power Inverter Thank you for purchasing the POWERDRIVE300 power inverter, a high performance solution to using
C O R P O R A T IO N O P E R A T I N G I N S T R U C T I O N S OBAE, OBAEXU, ON BOARD Battery Chargers INTRODUCTION: The OBAE line of chargers are designed for the permanent installation on battery powered
C O R P O R A T IO N O P E R A T I N G I N S T R U C T I O N S QPET, QPETXU Battery Chargers INTRODUCTION: The QPET line of chargers are designed for general purpose deep cycle batteries. They are an electronically
DTXP4195 AC/DC LIPO CHARGER INSTRUCTION MANUAL The Onyx 150 AC/DC LiPo balancing charger is the perfect entry-level LiPo charger for modelers using up to 3S LiPo batteries. Inexpensive and very easy to
Operating Instructions for Your Cobra 300 Watt POWER INVERTER M ODEL CPI 300 Nothing comes close to a Cobra 00 300 Watt POWER INVERTER MODEL CPI 300 Congratulations Thank you for purchasing the CPI 300
PROFESSIONAL SERIES Owner s Guide for models: ca5354 Deluxe Vehicle Remote Start System with 900Mhz 2 Way Confirming LED Remote Control IMPORTANT NOTE: The operation of the Security and Convenience System
OWNER'S MANUAL DieHard. BATTERY CHARGER/MAINTAINER 1.5 Amp Fully Automatic Float-Mode Monitoring Model No. 200.71220 CAUTION: Read and follow all Safety Rules and Operating Instructions Before Every Use
OWNERS MANUAL Models: SP3, SPSS3 Automatic Battery Charger PLEASE SAVE THIS OWNERS MANUAL AND READ BEFORE EACH USE. This manual will explain how to use the charger safely and effectively. Please read and
Audi R8 Ride-on Car 5F62630 OWNER S MANUAL Keep instructions for future reference 1 Safety The owner s manual contains assembly, use and maintenance instructions. The vehicle must be assembled by an adult
R Intelligent Charging System Series OWNER S MANUAL ON BOARD BATTERY CHARGERS Models Amperage No. Of Banks Volts 16061 s 1 Bank 12 16102 6,s 2 Banks 12 or 24 16153 6,6,s 3 Banks 12 or 24 or 36 16202 10,10
R MODEL 2611 10 AMP ON BOARD BATTERY CHARGER Two Outputs OWNER S MANUAL Connections at a glance: For the best charging results both 12 Volt independent batteries should be equally discharged. The charger
Model: 600B SLA Battery Capacity Analyzer USER MANUAL Safety Summary The following safety precautions apply to both operating and maintenance personnel and must be followed during all phases of operation,
instructions for roadstart units model no: RS1.V5, RS102.V4, RS103.V3 Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions,
VEC158CFL_Manual_012405 1/24/05 4:37 PM Page iv VEC158 Twin-Beam Spotlight 3,000,000 Power Series Corded Cordless Rechargeable OWNER S MANUAL & WARRANTY INFORMATION IMPORTANT SAFETY INFORMATION, SAVE THESE
PROFESSIONAL SERIES ca 5550SST Owner s Guide Deluxe Vehicle Remote Start System with 900Mhz 2 Way Confirming LCD Remote Control IMPORTANT NOTE: The operation of the Security and Convenience System as described
For use with machines having Code Numbers: 11912 IM10139 September, 2013 Safety Depends on You Century charging and jump starting equipment is designed and built with safety in mind. However, your overall
P OWER CUBE T M Powerful Universal Portable Charger PLEASE READ BEFORE OPERATING THIS EQUIPMENT HALO POWER CUBE Thank you for choosing HALO. The Power Cube is the best of both worlds. It combines the on-the-go
VEC156CFL_Manual_012405 1/24/05 4:29 PM Page iv VEC156 Spotlight 1,000,000 Power Series Cordless Rechargeable OWNER S MANUAL & WARRANTY INFORMATION 53SB E231887 IMPORTANT SAFETY INFORMATION, SAVE THESE
Operating Instructions for Your Cobra 150 Watt INVERTER M ODEL CPI 150 Nothing comes close to a Cobra 00 Congratulations Thank you for purchasing the CPI 150 Power Inverter from Cobra. When used properly,
powerdriveinverters.com Owner s Guide Please Save for Future Reference 750 750 Watt DC to AC Power Inverter Thank you for purchasing the POWERDRIVE750 power inverter, a high performance solution to using
Operating Instructions PRO- If you sell, inventory or service lead-acid batteries, you want the battery you take off the shelf to be as new as the day it was manufactured. However, batteries that sit idle
2002 HUSKY PROFESSIONAL TOOLS made in china HSK020HD Jump-Start System 12-VOLT PORTABLE POWER SUPPLY PORTABLE, CORDLESS, RECHARGEABLE 12-VOLT DC POWER SUPPLY OWNER S MANUAL COMPLETELY PORTABLE, SAFE AND
Duo Charger for Digital Camera and Camcorder Batteries Owner's Manual Please read before using this equipment. Thank you for purchasing the Watson Duo Charger. Browse through this manual for instructions
Digital Intelligent Battery Charger OPERARATOR S MANUAL WARNING! Before you install and use your Nitro Battery Charger, be sure to read and save these safety instructions. INTRODUCTION The Sinergex Nitro
Deltran Battery Tender 6V/12V 4Amp 5 & 10 Bank Battery Management System Designed for Six-cell and three-cell Flooded/AGM/GEL Lead-Acid Batteries and Four-Cell Lithium Iron Phosphate (LiFePO4) Batteries
INSTRUCTIONS Discharge Termination: auto-cut based on individual cell voltages 2.75V per cell in Quick-Balance Mode 3.0V per cell in Interface Mode with separate discharger Discharge Current: 120mA per
Vision Ultra AC/DC Charger Operation Manual www.dynamiterc.com Notice All instructions, warranties, and other collateral documents are subject to change at the sole discretion of Horizon Hobby, Inc. For
INSTRUCTION MANUAL FILE: 091-165-12 reve Rev: E, page 8 DATE: 7-02-15 AUTO CHARGE 12 AUTOMATIC BATTERY CHARGER MODEL #091-165-12 NOTE : This charger is designed for vehicles with a single battery and negative
PROFESSIONAL SERIES Owner s Guide For Models: ca6553 ca6553sst Deluxe Vehicle Security and Remote Start System with 2 Way Confirming LCD Remote Control IMPORTANT NOTE: The operation of the Security and
Introduction Our Thanks to You The Cobra line of quality products includes: Operating Instructions Thank you for purchasing the Cobra CPI 850 inverter. Properly used, this Cobra product will give you many
INSTRUCTION MANUAL The TrakPower DPS Power Supply is perfect for competition-level racing as it is capable of maintaining 25 amps output current at 12V DC. This power supply delivers clean, smooth, reliable
Zap 5LX-S Model No.: BH9938U-5-2 Questions or Concerns? (855) 686-3835 firstname.lastname@example.org Thank You. Thank you for purchasing the Zap 5LX-S Remote Outlet Switch by Etekcity. We are dedicated to providing
FEATURES Charges two 6- to 8-cell NiCd/NiMH battery packs simultaneously Fully automatic operation Multi-color LEDs indicate state of charge at a glance 8-bit MHz CPU intelligence control Advanced Pulse
Item no. 2511 20A Solar Charge Controller User s Manual 20A Solar Charge Controller by Wagan Tech Thank you for purchasing the 20A Solar Charge Controller by Wagan Tech. With normal care and proper treatment
Item #30554 MULTI-FUNCTION POWER PACK INSTRUCTIONS The ROCKWOOD MULTI-FUNCTION POWER PACK is an amazingly powerful yet compact power source fully capable of starting a vehicle repeatedly as well as providing
6V 3-Wheel City Scooter Owner s Manual and Assembly Instructions Model #: W326-P Read and understand the entire manual before assembly and operation. The vehicle must be assembled by an adult who has read
You re never left in the dark. Handcrank Power Supply Always prepared for any outage Merrimack, New Hampshire USA 03054 800-846-3000 Brookstone.com Table of contents Warnings and Cautions....................................................
professional series Owner s Guide PROCOMP Deluxe Vehicle Security and Remote Start System with 900 Mhz 2 Way Confirming OLED Remote Control IMPORTANT NOTE: The operation of the Security and Convenience
S150,S300 Series Pure Sine Wave Inverter User s Manual List of contents 1. Important Safety Instructions 3 1-1 General Safety Precautions 3 1-2 Precautions When Working With Batteries.. 3 2. Features...
User Manual Posture+ Adjustable Base For customer service call: 1-877-707-7533 1 IMPORTANT INFORMATION PLEASE READ THESE INSTRUCTIONS THOROUGHLY BEFORE USING THIS PRODUCT. PROPER OPERATION OF YOUR ADJUSTABLE
BATTERY CHARGER OWNER S MANUAL POWER CHARGER Part # 74016 12-16 volt Amp ----CAUTION---- READ THIS MANUAL CAREFULLY FOR RULES OF SAFE OPERATION AND PROPER USE OF THIS CHARGER ***SAVE THESE INSTRUCTIONS***
R Item no. 2402 Smart AC 200 USB User s Manual Smart AC 200 Watt with USB by Wagan Tech User s Manual Read before using this equipment Thank you for purchasing Smart AC 200 Watt with USB by Wagan Tech.
1000-Watt Energy Center OPERATING INSTRUCTIONS Patent Pending Sierra Wave 1000-Watt Energy Center #9675 The Sierra Wave 1000-Watt Energy Center is a heavy duty and efficient portable power center offering
MODEL 600A 6 VOLT BATTERY CHARGER ASSOCIATE IMPORTANT SAFETY INSTRUCTIONS. SAVE THESE INSTRUCTIONS. This manual contains important safety and operating instructions for the battery charger you have purchased.
Remote Vehicle Control System CA-150 Owner's Manual Vehicle Security System With Remote Keyless Entry IMPORTANT NOTE: The operation of the Security and Convenience System as described in this manual is
RIGrunner for models 4004USB 4005 / 4005H 4008 / 4008H 4012 www.westmountainradio.com 1020 Spring City Drive Waukesha, WI 53186 262-522-6503 email@example.com 2015 West Mountain Radio, All rights
Instructions for: ROADSTART Units RS1.V4 RS102.V3 RS103.V2 RS104.V2 RS105.V2 Thank you for purchasing a Sealey product. Manufactured to a high standard this product will, if used according to these instructions
Introduction Our Thanks to You The Cobra line of quality products includes: Operating Instructions Thank you for purchasing the Cobra Power Inverter CPI2590. Properly used, this Cobra product will give
Table of Contents How the Surestart SE 433 Operates... 3 Starting the Vehicle with the Remote Starter... 3 Stopping the Vehicle While It Is Running Via the Remote Starter... 4 Operating Your Vehicle While
Power Meter with Balancing INSTRUCTION MANUAL INSTRUCTIONS The PowerMatch meter is a perfect device for matching electronic components to optimize electric fl ight performance and satisfaction. An easy-to-read
8-Bay Rapid Charger for AA/AAA NiMH & NiCd Rechargeable Batteries Owner's Manual Please read before using this equipment. Thank you for purchasing the Watson 8-Bay Rapid Charger. Browse through this manual
Owner s Manual & Safety Instructions Save This Manual Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product s
Table of contents Safety... 2 Specifications... 6 Operation... 7 Maintenance... 10 Warranty... 12 SAFETy SpEcIFIcATIONS OpERATION MAINTENANcE VAc A cca Rc Ah WARNING SyMBOLS AND DEFINITIONS This is the
777P-PT Battery Charging/Starting System Analyzer with Printer For testing 6- and 12-volt batteries and 12- and 24-volt charging systems Test Procedures / Operating Instruction IMPORTANT: 1. For testing
Go Power! Manual GP-1000 Inverter Go Power! Electric Inc. PO Box 6033 Victoria, BC V8P 5L4 Tel: 866-247-6527 Fax: 866-607-6527 Email: firstname.lastname@example.org Table of Contents 1. INTRODUCTION 3 2. SPECIFICATIONS
PROFESSIONAL SERIES Owner s Guide ca4054 ca4554 Remote Start System IMPORTANT NOTE: The operation of the Security and Convenience System as described in this manual is applicable to most vehicles. However,
ASSEMBLY, MAINTENANCE, & USER MANUAL MODEL #SWAC100 WARNING Read all precautions and instructions in this manual before using this equipment. Save this manual for future reference. Adult use only. Skywalker