Jumpbox Model SP-12V1500-JB1

Transcription

1 FLEET PRO 1500D Jumpbox Model SP-12V1500-JB1 Questions, missing parts, problems? Before returning to your retailer, send us a message through our Contact Us page on Starkpower.com

2 ONE YEAR LIMITED WARRANTY Period of Coverage: This product is warranted to the original purchaser from the original purchase date for one (1) year and is subject to the Warranty Coverage described herein. Warranty Coverage: This product is warranted by Stark Power, Inc. 115 Denver Business Park Unit C., Mooresville, NC to be free from defects in material and workmanship. This Limited Warranty does not cover defects or damage due to: accidents, acts of God, misuse, abuse abnormal use, abnormal conditions, alternation of to the product, attachment to any unauthorized accessory; improper use of an electrical power supply that causes malfunction; loss of power; dropped or crushed product; tampering with or attempt to modify the product; unauthorized opening of the product; transportation damage; theft, vandalism, loss of use during the period the product is at a repair facility or otherwise awaiting parts or repair; Failure to operate this product in accordance with the instructions provided in this Owners Manual supplied with this product. If product is use for commercial or industrial purposes the warranty will be void. DISCLAIMER: No warranty, written or oral, other than the above warranty is valid with regard to this product. Manufacturer shall not in any way be liable to the purchaser or any third party for any damages the purchaser or any third party may suffer as a result of use, intended or unintended or misuse of this product in conjunction with any device, equipment or accessory other than the appropriate device or equipment for which the product is designed. Do not return product for warranty service to your Retailer. Please return to Stark Power at address listed above.

3 SAFETY INFORMATION PLEASE Read this entire manual before attempting to use the product. WARNING 1 Do not damage, drop or crush this item. Do not attempt to use this item or battery charger that has been dropped, punctured, run over or damaged in any way. 2. Do not charge this item in wet conditions (rain, snow, damp). Do not use this product in explosive environments (dust, bilge, gaseous fumes, or flammable materials). 3. Do not burn or incinerate this product. It may explode, causing personal injury or damage. Toxic fumes and other potentially harmful materials are created when the battery is burned. 4. Do not disassemble this product. It may result in risk of fire, electric shock or exposure to battery chemicals 5. Do not insert foreign objects into ANY input or output ports. This item may short circuit. Any metal that comes in contact with the jumper cable port may short circuit. Short circuiting this product will damage the battery and may cause personal injury or fire. 6. This is a Lithium Ion battery. In the unlikely event that this product leaks battery chemicals, do not allow contact with skin, eyes or mouth as it may cause personal injury or burns. If skin is exposed to battery chemicals, wash with soap and water and rinse with vinegar. If your eyes come in contact with battery chemicals, immediately flush with water and then see a medical professional. 7. When recharging this item, make sure the area is well ventilated. Please do not smoke or allow open flames near a charging battery. 8. Never jump start a frozen battery. 9. Please keep the product away from and out of reach of children. 10. Do not expose the battery to temperatures over +140F (60C) or below -14F (-26C). 11. If the unit needs to be disposed of for any reason. It must be disposed of properly by calling your nearest lithium-ion battery recycle facility at BATTERY. 12. If the product malfunctions or is having problems, discontinue use and contact us at info@starkpower.com. 13. Store this unit in a cool dry location. 13. This unit is not designed to be used in place of a vehicle battery. 14. This unit is not designed to be utilized as a battery charger. 1

4 WARNING Warning - always check for the presence of flammable gases in enclosed areas such as a bilge or in an engine compartment. Always properly ventilate these areas before attempting to start the engine, hook up a jump starter or start the jump starting process. Do not use this product near or in the presence of propane tanks, natural gas or any other explosive fumes that may accumulate, especially in low or enclosed areas. Note that the lead acid battery may vent potentially explosive gases during the process of cranking the engine - ALWAYS KEEP THE AREA WELL VENTILATED to elimiate potentially explosive gases before performing any jump starting process. 1. Shield eyes with protective safety glasses or safety goggles. 2. Make sure the ignition switch in the vehicle to be jumped is in the off position before attaching cables. 3. Always put the ground (Black) cable on a non-moving engine ground point. Never connect clamps to the carburetor or fuel injection system as a ground point. California Prop 65: WARNING: This product contains chemicals, including lead, known to the State of California to cause Cancer and birth defects or other reproductive harm. Wash hands after handling. 2

5 PACKAGE CONTENTS Charger Laptop Adapter Carrying Case Safety Jumper Cables 4 in 1 Mobile Adapter Power Adapter 3

6 GENERAL INFORMATION The FleetPro 1500 is capable of starting engines up to 7.0L diesel gasoline. This also includes 4 cylinder, inline 6 and V.8 gasoline engines. Compatible with: The Fleetpro 1500 has 115,200 mwh of capacity for charging laptops, mobile phones, portable gaming devices, MP3/MP4 players, cameras, tablets and other electronic devices. It charges at 2 times the rate of a typical AC wall outlet. It also has emergency LED flashlight with 3 modes. Recharging the Jump Starter Unit: Insert the small end of the AC power cord or the charger into the charge input port, then plug into the 120V/220V power or 12V DC car charger port. The device is charging when the LCD battery indicator IN flashes red. When the unit is fully charged, the LED battery level indicator will be fully illuminated. Note: Full recharge of the unit should take between 4-6 hours depending upon battery level. We recommend charging the unit every 6 months for optimum performance. 4

7 LED Flashlight Operation: Press and hold the button for three seconds to turn on the flashlight. Afterwards, press the same button to change the normal LED function to the flickering mode or SOS distress mode, press the button again to turn it off. Charging electronic devices: Turn the power button to ON position. Insert matching adapter cable (4 in 1 cable or included) into the proper output port (USB/ circular output port), then attach the device that needs to be charged (mobile phone, tablet, camera, or other electronic device). Charging laptop devices: Turn the power button to ON position, then insert the adapter power plug into output interface of laptop. Next, adjust power supply voltage to the proper voltage recommended for your laptop. You will be able to toggle from 12V and 19V as you briefly press the black button. Note: laptops generally use 19V. Before use please confirm the product voltage number with the manufacturer of the laptop 5

8 QUICK START GUIDE: JUMP STARTER 1 2 Plug cable into side of unit Connect the clamps: Red to + and Black to Start the engine Remove the clamps from vehicle battery IMPORTANT: If jump starter does not jump start the engine, jump starter may not have sufficient charge OR the jumper cable may be improperly connected to the vehicle battery. NOTE regarding cables: If there is an improper connection or the cable polarity is reversed then the red light on unit will either be flashing or illuminated and the unit will emit an audible alarm. If you are hearing the alarm, this means that the unit is not connected properly and will not charge the vehicle. Recheck connections and try again. 6

9 FUNCTION ON SMART BATTERY JUMPER CABLE 1. Reverse polarity connection: Solid Red LED with fast 2 short beep. 2. Short-circuit protection: Solid Red LED with long beep 3. Over-heat protection: Solid red LED with Long beep 4. Over-discharging protection: Solid red LED with fast 2 short beep 5. Green/Red LED flashing: Searching for status of connection 6. Green LED:Correct connection after one beep WARNING DO NOT crank the engine for more than 4 continuous seconds while the unit is connected to the battery. If the engine fails to crank or start, there may be a problem other than a discharged battery. 7

10 JUMP STARTING VEHICLE BATTERY 1. Refer to your vehicle s owners manual for proper jump start location. 2. Check the battery terminals to ensure they are clean and free from any debris for best connection. 3. Identify the positive + and negative - terminals before connecting the clamps. 4. Make sure jump starter battery has at least 30% charge. 5. Plug the jumper cables into the jump starter output port (next to the LED light). 6. Double click the black button to activate the jumper cables. 7. Connect cables to your vehicle s battery by first connecting the + positive/red cable clamp to the + positive/red cable terminal on your vehicle s battery. Next connect the - negative/black cable clamp to the - negative/black terminal on your vehicle s battery. 8. Turn the ignition key to the first position, so that the unit will detect a current draw and activate properly. For push button ignition systems, push the ignition button twice to engage the smart cable. 9. When the safety jumper cable status light illuminates solid green, then you have a proper connection to start the vehicle. 10. If status lights are blinking red, solid red or alternating red/green then see smart battery function on page Start the engine (key cycle) NOTE:This unit uses advanced safety jumper cables which provide short circuit protection, reverse polarity protection and temperature limits. Please ONLY use the jumper cables supplied with this unit to ensure safety and best results. 12 Disconnect clamps immediately after starting vehicle. 8

11 PRODUCT FEATURES LED display 2. Flashlight 3. Battery terminal socket 4. Push button 5. 19V-2A/3.5A outlet 6. 5v/2.1A output 7. 12V-2A outlet 8. 12V/15A input 9. Power ON/OFF 9

12 TECHNICAL SPECIFICATIONS Output voltage : 9V to 14.4V, Peak capacity : 115,200 mwh Dimensions : 7.21 (L) x 4.69 (W) x 1.8 (H) 183 x 119 x 45.6mm Input Charging Ports: 6mm - 15V, up to 1A/12V Auto - 12V, up to 1.5A Output ports: USB - 5V 2.1A Auto jump starter - 12V Electronic- 12/19V-2A//3.5A Charge mode: CC/CV 15V 1A Start Current: 700A Peak Current: 1500A Cycle life: depth of discharge Application temperature range: -4F to +140F (-20C to+60c). Cell performance may degrade at low temperature. Charging times - 110V Wall Charger: 4 hours 12V DC Charger: 8 hours 10

13 INTELLIGENT LI-ION BATTERIES BY 11

14 Emergency jump starter and electronics charger device 115 Denver Business Park Unit C Mooresville, NC Customer Service Line: Patent Pending Made in China 2015 All rights reserved.